linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To: Nicolas Dufresne <nicolas@ndufresne.ca>,
	Ming Qian <ming.qian@nxp.com>,
	"mchehab@kernel.org" <mchehab@kernel.org>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>
Cc: "kernel@pengutronix.de" <kernel@pengutronix.de>,
	"festevam@gmail.com" <festevam@gmail.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	Aisheng Dong <aisheng.dong@nxp.com>,
	"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [EXT] Re: [PATCH v9 00/13] amphion video decoder/encoder driver
Date: Mon, 11 Oct 2021 11:12:06 +0200	[thread overview]
Message-ID: <bf2ab6db-935e-f658-2d8a-5e9f2e13895c@xs4all.nl> (raw)
In-Reply-To: <27ec66639de79216e9b887ee6977f35906e33a43.camel@ndufresne.ca>

On 23/09/2021 15:33, Nicolas Dufresne wrote:
> Le jeudi 23 septembre 2021 à 10:45 +0000, Ming Qian a écrit :
>>> -----Original Message-----
>>> From: Nicolas Dufresne [mailto:nicolas@ndufresne.ca]
>>> Sent: Wednesday, September 22, 2021 10:14 PM
>>> To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org;
>>> shawnguo@kernel.org; robh+dt@kernel.org; s.hauer@pengutronix.de
>>> Cc: hverkuil-cisco@xs4all.nl; kernel@pengutronix.de; festevam@gmail.com;
>>> dl-linux-imx <linux-imx@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>;
>>> linux-media@vger.kernel.org; linux-kernel@vger.kernel.org;
>>> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org
>>> Subject: [EXT] Re: [PATCH v9 00/13] amphion video decoder/encoder driver
>>>
>>> Caution: EXT Email
>>>
>>> Hi Ming,
>>>
>>> Le lundi 13 septembre 2021 à 17:11 +0800, Ming Qian a écrit :
>>>> Hi all,
>>>>
>>>> This patch series adds support for
>>>> the amphion video encoder and decoder
>>>> via the VPU block present in imx8q platforms.
>>>> Currently, support for IMX8QXP and IMX8QM is included.
>>>
>>> I've been trying to test this driver, based it on mainline 5.15-rc2 in
>>> absence of
>>> recommendation here. There seems to be poor mainline support for this board,
>>> notably only 1 CPU come up. Finally, I could not test anything as the driver
>>> failed to boot the decoders and encoder cores:
>>>
>>> [   30.766160] [VPU CORE][0] decoder boot
>>> [   31.873175] [VPU CORE][0] decoder boot timeout
>>> [   31.878057] [VPU V4L2]there is no core for decoder
>>> [ 1766.495963] [VPU CORE][1] encoder boot [ 1767.524957] [VPU CORE][1]
>>> encoder boot timeout [ 1767.529724] [VPU V4L2]there is no core for encoder
>>>
>>> Please, let me know how I can get passed these issues. I have used firmwares
>>> referenced in Yocto tree:
>>>
>>>
>>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.n
>>> xp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-7.9.bin&amp
>>> ;data=04%7C01%7Cming.qian%40nxp.com%7Ce50ac93addb444f7cd9b08d97
>>> dd33c6e%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63767916
>>> 8483236134%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIj
>>> oiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=cM3%2F
>>> Go0MxD0RSDmS5ELr6yCdNe4EH%2FeTAFtcAcBArRo%3D&amp;reserved=0
>>>
>>> Firmware for this driver will also be a subject to tackle. In an ideal
>>> world, the
>>> "self extracted" script requirement to accept your EULA would need to be
>>> waved, and distribution of the firmware should go into linux-firmwares. I
>>> believe firmwares are still allowed to have some user agreement, but I
>>> suppose
>>> there must be guidelines, best is to ask there directly.
>>>
>>> regards,
>>> Nicolas
>>>
>>
>> Seems you use the wrong firmware, I will send the firmware to you.
>> My commit base is 9c3a0f285248899dfa81585bc5d5bc9ebdb8fead, 
>> You can find it in the bottom of this cover.
>>
>> Would you please explain the linux-firmware issue in detail
> 
> I believe that to merge a driver (non staging) that depends on a firmware (I'll
> let Hans and others confirm), you need to submit this firmware, along with a
> non-interactive licence to be included in the linux-firmware project.

That's correct.

Regards,

	Hans

> NXP notably have an SDMA firmware in there, with a licence file. Perhaps these
> developers can assist in this regard. Often that takes time due to legal
> requirement of moving from an interactive EULA to a licence file.
> 
> In later version, it would be nice to explain in the cover later the status of
> firmware distribution, and how to obtain the correct version of (specially if
> not yet in linux-firmware).
> 
> Thanks for sending me the firmwares, I will see if I can do more tests.
> 
>>
>>>>
>>>> It features decoding for the following formats:
>>>> - H.264
>>>> - HEVC
>>>> - MPEG4
>>>> - MPEG2
>>>> - VC1
>>>> - VP8
>>>>
>>>> It features encoding for the following formats:
>>>> - H.264
>>>>
>>>> The driver creates a separate device node for the encoder and decoder.
>>>>
>>>> Changelog:
>>>>
>>>> v9
>>>> - drop V4L2_BUF_FLAG_CODECCONFIG
>>>> - drop V4L2_EVENT_CODEC_ERROR
>>>> - drop V4L2_EVENT_SKIP
>>>> - use the v4l2_buffer.sequence counter
>>>> - fix some build warnings with W=1 reported by kernel test robot
>>>>
>>>> v8
>>>> - move driver from driver/media/platform/imx/vpu-8q to
>>>>   driver/media/platform/amphion
>>>> - rename driver name to amphion
>>>> - remove imx_vpu.h
>>>> - move the definition of V4L2_EVENT_CODEC_ERROR to videodev2.h
>>>> - move the definition of V4L2_EVENT_SKIP to videodev2.h
>>>>
>>>> v7
>>>> - fix build warnings with W=1 reported by kernel test robot
>>>>
>>>> v6:
>>>> - rename V4L2_PIX_FMT_NT8 to V4L2_PIX_FMT_NV12_8L128
>>>> - rename V4L2_PIX_FMT_NT10 to V4L2_PIX_FMT_NV12_10BE_8L128
>>>>
>>>> v5:
>>>> - move some definition from imx_vph.h to videodev2.h
>>>> - remove some unnecessary content
>>>> - add some documentation descriptions
>>>> - pass the lateset v4l2-compliance test
>>>>
>>>> v4:
>>>> - redefine the memory-region in devicetree bindings documentation
>>>> - use v4l2's mechanism to implement synchronize queuing ioctl
>>>> - remove the unnecessary mutex ioctl_sync
>>>> - don't notify source change event if the parameters are same as
>>>> previously established
>>>> - add flag V4L2_FMT_FLAG_DYN_RESOLUTION to decoder's capture format
>>>>
>>>> v3:
>>>> - don't make vpu device node a simple-bus
>>>> - trigger probing vpu core in the driver
>>>> - remove unnecessary vpu core index property
>>>>
>>>> v2:
>>>> - fix dt bindings build error
>>>> - split driver patch into several parts to avoid exceeding bytes limit
>>>>
>>>> Compliance
>>>> ==========
>>>> # v4l2-compliance -d /dev/video0
>>>> v4l2-compliance 1.21.0-4838, 64 bits, 64-bit time_t v4l2-compliance
>>>> SHA: 22466798f9a9 2021-08-25 11:05:21
>>>>
>>>> Compliance test for amphion-vpu device /dev/video0:
>>>>
>>>> Driver Info:
>>>>       Driver name      : amphion-vpu
>>>>       Card type        : amphion vpu decoder
>>>>       Bus info         : platform: amphion-vpu
>>>>       Driver version   : 5.14.0
>>>>       Capabilities     : 0x84204000
>>>>               Video Memory-to-Memory Multiplanar
>>>>               Streaming
>>>>               Extended Pix Format
>>>>               Device Capabilities
>>>>       Device Caps      : 0x04204000
>>>>               Video Memory-to-Memory Multiplanar
>>>>               Streaming
>>>>               Extended Pix Format
>>>>       Detected Stateful Decoder
>>>>
>>>> Required ioctls:
>>>>       test VIDIOC_QUERYCAP: OK
>>>>       test invalid ioctls: OK
>>>>
>>>> Allow for multiple opens:
>>>>       test second /dev/video0 open: OK
>>>>       test VIDIOC_QUERYCAP: OK
>>>>       test VIDIOC_G/S_PRIORITY: OK
>>>>       test for unlimited opens: OK
>>>>
>>>> Debug ioctls:
>>>>       test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>>       test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>>
>>>> Input ioctls:
>>>>       test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>>>       test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>>       test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>>       test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>>       test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>>>       test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>>       Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>>
>>>> Output ioctls:
>>>>       test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>>       test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>>       test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>>       test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>>       test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>>       Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>>
>>>> Input/Output configuration ioctls:
>>>>       test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>>>       test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>>>       test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>>       test VIDIOC_G/S_EDID: OK (Not Supported)
>>>>
>>>> Control ioctls:
>>>>       test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>>>       test VIDIOC_QUERYCTRL: OK
>>>>       test VIDIOC_G/S_CTRL: OK
>>>>       test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>>>       test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>>>       test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>>       Standard Controls: 3 Private Controls: 0
>>>>
>>>> Format ioctls:
>>>>       test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>>       test VIDIOC_G/S_PARM: OK (Not Supported)
>>>>       test VIDIOC_G_FBUF: OK (Not Supported)
>>>>       test VIDIOC_G_FMT: OK
>>>>       test VIDIOC_TRY_FMT: OK
>>>>       test VIDIOC_S_FMT: OK
>>>>       test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>>       test Cropping: OK (Not Supported)
>>>>       test Composing: OK
>>>>       test Scaling: OK (Not Supported)
>>>>
>>>> Codec ioctls:
>>>>       test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>>>       test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>>       test VIDIOC_(TRY_)DECODER_CMD: OK
>>>>
>>>> Buffer ioctls:
>>>>       test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>>       test VIDIOC_EXPBUF: OK
>>>>       test Requests: OK (Not Supported)
>>>>
>>>> Total for amphion-vpu device /dev/video0: 45, Succeeded: 45, Failed:
>>>> 0, Warnings: 0
>>>>
>>>> # v4l2-compliance -d /dev/video1
>>>> v4l2-compliance 1.21.0-4838, 64 bits, 64-bit time_t v4l2-compliance
>>>> SHA: 22466798f9a9 2021-08-25 11:05:21
>>>>
>>>> Compliance test for amphion-vpu device /dev/video1:
>>>>
>>>> Driver Info:
>>>>       Driver name      : amphion-vpu
>>>>       Card type        : amphion vpu encoder
>>>>       Bus info         : platform: amphion-vpu
>>>>       Driver version   : 5.14.0
>>>>       Capabilities     : 0x84204000
>>>>               Video Memory-to-Memory Multiplanar
>>>>               Streaming
>>>>               Extended Pix Format
>>>>               Device Capabilities
>>>>       Device Caps      : 0x04204000
>>>>               Video Memory-to-Memory Multiplanar
>>>>               Streaming
>>>>               Extended Pix Format
>>>>       Detected Stateful Encoder
>>>>
>>>> Required ioctls:
>>>>       test VIDIOC_QUERYCAP: OK
>>>>       test invalid ioctls: OK
>>>>
>>>> Allow for multiple opens:
>>>>       test second /dev/video1 open: OK
>>>>       test VIDIOC_QUERYCAP: OK
>>>>       test VIDIOC_G/S_PRIORITY: OK
>>>>       test for unlimited opens: OK
>>>>
>>>> Debug ioctls:
>>>>       test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>>       test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>>
>>>> Input ioctls:
>>>>       test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>>>       test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>>       test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>>       test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>>       test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>>>       test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>>       Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>>
>>>> Output ioctls:
>>>>       test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>>       test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>>       test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>>       test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>>       test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>>       Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>>
>>>> Input/Output configuration ioctls:
>>>>       test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>>>       test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>>>       test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>>       test VIDIOC_G/S_EDID: OK (Not Supported)
>>>>
>>>> Control ioctls:
>>>>       test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>>>       test VIDIOC_QUERYCTRL: OK
>>>>       test VIDIOC_G/S_CTRL: OK
>>>>       test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>>>       test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>>>       test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>>       Standard Controls: 20 Private Controls: 0
>>>>
>>>> Format ioctls:
>>>>       test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>>       test VIDIOC_G/S_PARM: OK
>>>>       test VIDIOC_G_FBUF: OK (Not Supported)
>>>>       test VIDIOC_G_FMT: OK
>>>>       test VIDIOC_TRY_FMT: OK
>>>>       test VIDIOC_S_FMT: OK
>>>>       test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>>       test Cropping: OK
>>>>       test Composing: OK (Not Supported)
>>>>       test Scaling: OK (Not Supported)
>>>>
>>>> Codec ioctls:
>>>>       test VIDIOC_(TRY_)ENCODER_CMD: OK
>>>>       test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>>       test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>>
>>>> Buffer ioctls:
>>>>       test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>>       test VIDIOC_EXPBUF: OK
>>>>       test Requests: OK (Not Supported)
>>>>
>>>> Total for amphion-vpu device /dev/video1: 45, Succeeded: 45, Failed:
>>>> 0, Warnings: 0
>>>>
>>>> Ming Qian (13):
>>>>   dt-bindings: media: amphion: add amphion video codec bindings
>>>>   media:Add nt8 and nt10 video format.
>>>>   media: amphion: add amphion vpu device driver
>>>>   media: amphion: add vpu core driver
>>>>   media: amphion: implement vpu core communication based on mailbox
>>>>   media: amphion: add vpu v4l2 m2m support
>>>>   media: amphion: add v4l2 m2m vpu encoder stateful driver
>>>>   media: amphion: add v4l2 m2m vpu decoder stateful driver
>>>>   media: amphion: implement windsor encoder rpc interface
>>>>   media: amphion: implement malone decoder rpc interface
>>>>   ARM64: dts: freescale: imx8q: add imx vpu codec entries
>>>>   firmware: imx: scu-pd: imx8q: add vpu mu resources
>>>>   MAINTAINERS: add AMPHION VPU CODEC V4L2 driver entry
>>>>
>>>>  .../bindings/media/amphion,vpu.yaml           |  178 ++
>>>>  .../media/v4l/pixfmt-yuv-planar.rst           |   15 +
>>>>  MAINTAINERS                                   |    9 +
>>>>  .../arm64/boot/dts/freescale/imx8-ss-vpu.dtsi |   72 +
>>>>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |   17 +
>>>>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi    |   24 +
>>>>  drivers/firmware/imx/scu-pd.c                 |    4 +
>>>>  drivers/media/platform/Kconfig                |   19 +
>>>>  drivers/media/platform/Makefile               |    2 +
>>>>  drivers/media/platform/amphion/Makefile       |   23 +
>>>>  drivers/media/platform/amphion/vdec.c         | 1652
>>> ++++++++++++++++
>>>>  drivers/media/platform/amphion/venc.c         | 1382
>>> ++++++++++++++
>>>>  drivers/media/platform/amphion/vpu.h          |  333 ++++
>>>>  drivers/media/platform/amphion/vpu_cmds.c     |  435 +++++
>>>>  drivers/media/platform/amphion/vpu_cmds.h     |   25 +
>>>>  drivers/media/platform/amphion/vpu_codec.h    |   68 +
>>>>  drivers/media/platform/amphion/vpu_color.c    |  192 ++
>>>>  drivers/media/platform/amphion/vpu_core.c     |  901 +++++++++
>>>>  drivers/media/platform/amphion/vpu_core.h     |   16 +
>>>>  drivers/media/platform/amphion/vpu_dbg.c      |  496 +++++
>>>>  drivers/media/platform/amphion/vpu_defs.h     |  186 ++
>>>>  .../media/platform/amphion/vpu_dev_imx8q.c    |   72 +
>>>>  drivers/media/platform/amphion/vpu_drv.c      |  215 +++
>>>>  drivers/media/platform/amphion/vpu_helpers.c  |  453 +++++
>>>>  drivers/media/platform/amphion/vpu_helpers.h  |   72 +
>>>>  drivers/media/platform/amphion/vpu_imx8q.c    |  218 +++
>>>>  drivers/media/platform/amphion/vpu_imx8q.h    |  116 ++
>>>>  drivers/media/platform/amphion/vpu_log.h      |   44 +
>>>>  drivers/media/platform/amphion/vpu_malone.c   | 1683
>>> +++++++++++++++++
>>>>  drivers/media/platform/amphion/vpu_malone.h   |   42 +
>>>>  drivers/media/platform/amphion/vpu_mbox.c     |  126 ++
>>>>  drivers/media/platform/amphion/vpu_mbox.h     |   16 +
>>>>  drivers/media/platform/amphion/vpu_msgs.c     |  413 ++++
>>>>  drivers/media/platform/amphion/vpu_msgs.h     |   14 +
>>>>  drivers/media/platform/amphion/vpu_rpc.c      |  263 +++
>>>>  drivers/media/platform/amphion/vpu_rpc.h      |  463 +++++
>>>>  drivers/media/platform/amphion/vpu_v4l2.c     |  625 ++++++
>>>>  drivers/media/platform/amphion/vpu_v4l2.h     |   53 +
>>>>  drivers/media/platform/amphion/vpu_windsor.c  | 1244 ++++++++++++
>>>>  drivers/media/platform/amphion/vpu_windsor.h  |   39 +
>>>>  drivers/media/v4l2-core/v4l2-ioctl.c          |    2 +
>>>>  include/uapi/linux/videodev2.h                |    4 +
>>>>  42 files changed, 12226 insertions(+)  create mode 100644
>>>> Documentation/devicetree/bindings/media/amphion,vpu.yaml
>>>>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
>>>>  create mode 100644 drivers/media/platform/amphion/Makefile
>>>>  create mode 100644 drivers/media/platform/amphion/vdec.c
>>>>  create mode 100644 drivers/media/platform/amphion/venc.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_cmds.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_cmds.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_codec.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_color.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_core.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_core.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_dbg.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_defs.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_dev_imx8q.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_drv.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_helpers.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_helpers.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_imx8q.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_imx8q.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_log.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_malone.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_malone.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_mbox.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_mbox.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_msgs.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_msgs.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_rpc.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_rpc.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_v4l2.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_v4l2.h
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_windsor.c
>>>>  create mode 100644 drivers/media/platform/amphion/vpu_windsor.h
>>>>
>>>>
>>>> base-commit: 9c3a0f285248899dfa81585bc5d5bc9ebdb8fead
>>>
>>
> 
> 


      parent reply	other threads:[~2021-10-11  9:12 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-13  9:11 [PATCH v9 00/13] amphion video decoder/encoder driver Ming Qian
2021-09-13  9:11 ` [PATCH v9 01/13] dt-bindings: media: amphion: add amphion video codec bindings Ming Qian
2021-09-13  9:11 ` [PATCH v9 02/13] media:Add nt8 and nt10 video format Ming Qian
2021-09-13  9:11 ` [PATCH v9 03/13] media: amphion: add amphion vpu device driver Ming Qian
2021-09-13  9:11 ` [PATCH v9 04/13] media: amphion: add vpu core driver Ming Qian
2021-09-22 13:10   ` Nicolas Dufresne
2021-09-23 10:32     ` [EXT] " Ming Qian
2021-09-23 14:27   ` Nicolas Dufresne
2021-09-24  1:52     ` [EXT] " Ming Qian
2021-09-13  9:11 ` [PATCH v9 05/13] media: amphion: implement vpu core communication based on mailbox Ming Qian
2021-09-13  9:11 ` [PATCH v9 06/13] media: amphion: add vpu v4l2 m2m support Ming Qian
2021-09-23 14:39   ` Nicolas Dufresne
2021-09-24  1:58     ` [EXT] " Ming Qian
2021-09-13  9:11 ` [PATCH v9 07/13] media: amphion: add v4l2 m2m vpu encoder stateful driver Ming Qian
2021-09-23 14:22   ` Nicolas Dufresne
2021-09-24  1:47     ` [EXT] " Ming Qian
2021-09-13  9:11 ` [PATCH v9 08/13] media: amphion: add v4l2 m2m vpu decoder " Ming Qian
2021-09-13  9:11 ` [PATCH v9 09/13] media: amphion: implement windsor encoder rpc interface Ming Qian
2021-09-13  9:11 ` [PATCH v9 10/13] media: amphion: implement malone decoder " Ming Qian
2021-09-13  9:11 ` [PATCH v9 11/13] ARM64: dts: freescale: imx8q: add imx vpu codec entries Ming Qian
2021-09-22 12:55   ` Nicolas Dufresne
2021-09-23 10:31     ` [EXT] " Ming Qian
2021-09-23 13:27       ` Nicolas Dufresne
2021-09-13  9:11 ` [PATCH v9 12/13] firmware: imx: scu-pd: imx8q: add vpu mu resources Ming Qian
2021-09-13  9:11 ` [PATCH v9 13/13] MAINTAINERS: add AMPHION VPU CODEC V4L2 driver entry Ming Qian
2021-09-22 14:13 ` [PATCH v9 00/13] amphion video decoder/encoder driver Nicolas Dufresne
2021-09-23 10:45   ` [EXT] " Ming Qian
2021-09-23 13:33     ` Nicolas Dufresne
2021-09-24  1:43       ` Ming Qian
2021-10-11  9:12       ` Hans Verkuil [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bf2ab6db-935e-f658-2d8a-5e9f2e13895c@xs4all.nl \
    --to=hverkuil-cisco@xs4all.nl \
    --cc=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=ming.qian@nxp.com \
    --cc=nicolas@ndufresne.ca \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).