* [PATCH] clk: qcom: Fix MSM8998 resets
@ 2018-12-03 15:34 Jeffrey Hugo
2018-12-03 15:55 ` Bjorn Andersson
0 siblings, 1 reply; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-03 15:34 UTC (permalink / raw)
To: andy.gross, david.brown, mturquette, sboyd
Cc: bjorn.andersson, linux-arm-msm, linux-clk, linux-kernel, Jeffrey Hugo
The offsets for the defined BCR reset registers does not match the hardware
documentation. Update the values to match the hardware documentation.
Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
drivers/clk/qcom/gcc-msm8998.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 9f0ae40..01cc555 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2742,25 +2742,25 @@ enum {
};
static const struct qcom_reset_map gcc_msm8998_resets[] = {
- [GCC_BLSP1_QUP1_BCR] = { 0x102400 },
- [GCC_BLSP1_QUP2_BCR] = { 0x110592 },
- [GCC_BLSP1_QUP3_BCR] = { 0x118784 },
- [GCC_BLSP1_QUP4_BCR] = { 0x126976 },
- [GCC_BLSP1_QUP5_BCR] = { 0x135168 },
- [GCC_BLSP1_QUP6_BCR] = { 0x143360 },
- [GCC_BLSP2_QUP1_BCR] = { 0x155648 },
- [GCC_BLSP2_QUP2_BCR] = { 0x163840 },
- [GCC_BLSP2_QUP3_BCR] = { 0x172032 },
- [GCC_BLSP2_QUP4_BCR] = { 0x180224 },
- [GCC_BLSP2_QUP5_BCR] = { 0x188416 },
- [GCC_BLSP2_QUP6_BCR] = { 0x196608 },
- [GCC_PCIE_0_BCR] = { 0x438272 },
- [GCC_PDM_BCR] = { 0x208896 },
- [GCC_SDCC2_BCR] = { 0x81920 },
- [GCC_SDCC4_BCR] = { 0x90112 },
- [GCC_TSIF_BCR] = { 0x221184 },
- [GCC_UFS_BCR] = { 0x479232 },
- [GCC_USB_30_BCR] = { 0x61440 },
+ [GCC_BLSP1_QUP1_BCR] = { 0x19000 },
+ [GCC_BLSP1_QUP2_BCR] = { 0x1b000 },
+ [GCC_BLSP1_QUP3_BCR] = { 0x1d000 },
+ [GCC_BLSP1_QUP4_BCR] = { 0x1f000 },
+ [GCC_BLSP1_QUP5_BCR] = { 0x21000 },
+ [GCC_BLSP1_QUP6_BCR] = { 0x23000 },
+ [GCC_BLSP2_QUP1_BCR] = { 0x26000 },
+ [GCC_BLSP2_QUP2_BCR] = { 0x28000 },
+ [GCC_BLSP2_QUP3_BCR] = { 0x2a000 },
+ [GCC_BLSP2_QUP4_BCR] = { 0x2c000 },
+ [GCC_BLSP2_QUP5_BCR] = { 0x2e000 },
+ [GCC_BLSP2_QUP6_BCR] = { 0x30000 },
+ [GCC_PCIE_0_BCR] = { 0x6c01c },
+ [GCC_PDM_BCR] = { 0x33000 },
+ [GCC_SDCC2_BCR] = { 0x14000 },
+ [GCC_SDCC4_BCR] = { 0x16000 },
+ [GCC_TSIF_BCR] = { 0x36000 },
+ [GCC_UFS_BCR] = { 0x75000 },
+ [GCC_USB_30_BCR] = { 0xf000 },
};
static const struct regmap_config gcc_msm8998_regmap_config = {
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH] clk: qcom: Fix MSM8998 resets
2018-12-03 15:34 [PATCH] clk: qcom: Fix MSM8998 resets Jeffrey Hugo
@ 2018-12-03 15:55 ` Bjorn Andersson
2018-12-03 16:08 ` Jeffrey Hugo
0 siblings, 1 reply; 7+ messages in thread
From: Bjorn Andersson @ 2018-12-03 15:55 UTC (permalink / raw)
To: Jeffrey Hugo
Cc: andy.gross, david.brown, mturquette, sboyd, linux-arm-msm,
linux-clk, linux-kernel
On Mon 03 Dec 07:34 PST 2018, Jeffrey Hugo wrote:
> The offsets for the defined BCR reset registers does not match the hardware
> documentation. Update the values to match the hardware documentation.
>
Sorry for not spotting this before.
> Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
> drivers/clk/qcom/gcc-msm8998.c | 38 +++++++++++++++++++-------------------
> 1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
> index 9f0ae40..01cc555 100644
> --- a/drivers/clk/qcom/gcc-msm8998.c
> +++ b/drivers/clk/qcom/gcc-msm8998.c
> @@ -2742,25 +2742,25 @@ enum {
> };
>
> static const struct qcom_reset_map gcc_msm8998_resets[] = {
> - [GCC_BLSP1_QUP1_BCR] = { 0x102400 },
> - [GCC_BLSP1_QUP2_BCR] = { 0x110592 },
> - [GCC_BLSP1_QUP3_BCR] = { 0x118784 },
> - [GCC_BLSP1_QUP4_BCR] = { 0x126976 },
> - [GCC_BLSP1_QUP5_BCR] = { 0x135168 },
> - [GCC_BLSP1_QUP6_BCR] = { 0x143360 },
> - [GCC_BLSP2_QUP1_BCR] = { 0x155648 },
> - [GCC_BLSP2_QUP2_BCR] = { 0x163840 },
> - [GCC_BLSP2_QUP3_BCR] = { 0x172032 },
> - [GCC_BLSP2_QUP4_BCR] = { 0x180224 },
> - [GCC_BLSP2_QUP5_BCR] = { 0x188416 },
> - [GCC_BLSP2_QUP6_BCR] = { 0x196608 },
> - [GCC_PCIE_0_BCR] = { 0x438272 },
> - [GCC_PDM_BCR] = { 0x208896 },
> - [GCC_SDCC2_BCR] = { 0x81920 },
> - [GCC_SDCC4_BCR] = { 0x90112 },
> - [GCC_TSIF_BCR] = { 0x221184 },
> - [GCC_UFS_BCR] = { 0x479232 },
> - [GCC_USB_30_BCR] = { 0x61440 },
> + [GCC_BLSP1_QUP1_BCR] = { 0x19000 },
> + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 },
> + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 },
> + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 },
> + [GCC_BLSP1_QUP5_BCR] = { 0x21000 },
> + [GCC_BLSP1_QUP6_BCR] = { 0x23000 },
> + [GCC_BLSP2_QUP1_BCR] = { 0x26000 },
> + [GCC_BLSP2_QUP2_BCR] = { 0x28000 },
> + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 },
> + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 },
> + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 },
> + [GCC_BLSP2_QUP6_BCR] = { 0x30000 },
> + [GCC_PCIE_0_BCR] = { 0x6c01c },
I find GCC_PCIE_0_BCR at 0x6b000 and then GCC_PCIE_0_PHY_BCR at 0x6c01c.
> + [GCC_PDM_BCR] = { 0x33000 },
> + [GCC_SDCC2_BCR] = { 0x14000 },
> + [GCC_SDCC4_BCR] = { 0x16000 },
> + [GCC_TSIF_BCR] = { 0x36000 },
> + [GCC_UFS_BCR] = { 0x75000 },
> + [GCC_USB_30_BCR] = { 0xf000 },
> };
With this updated, you have my
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] clk: qcom: Fix MSM8998 resets
2018-12-03 15:55 ` Bjorn Andersson
@ 2018-12-03 16:08 ` Jeffrey Hugo
2018-12-03 17:02 ` Stephen Boyd
0 siblings, 1 reply; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-03 16:08 UTC (permalink / raw)
To: Bjorn Andersson
Cc: andy.gross, david.brown, mturquette, sboyd, linux-arm-msm,
linux-clk, linux-kernel
On 12/3/2018 8:55 AM, Bjorn Andersson wrote:
> On Mon 03 Dec 07:34 PST 2018, Jeffrey Hugo wrote:
>
>> The offsets for the defined BCR reset registers does not match the hardware
>> documentation. Update the values to match the hardware documentation.
>>
>
> Sorry for not spotting this before.
>
>> Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>> ---
>> drivers/clk/qcom/gcc-msm8998.c | 38 +++++++++++++++++++-------------------
>> 1 file changed, 19 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
>> index 9f0ae40..01cc555 100644
>> --- a/drivers/clk/qcom/gcc-msm8998.c
>> +++ b/drivers/clk/qcom/gcc-msm8998.c
>> @@ -2742,25 +2742,25 @@ enum {
>> };
>>
>> static const struct qcom_reset_map gcc_msm8998_resets[] = {
>> - [GCC_BLSP1_QUP1_BCR] = { 0x102400 },
>> - [GCC_BLSP1_QUP2_BCR] = { 0x110592 },
>> - [GCC_BLSP1_QUP3_BCR] = { 0x118784 },
>> - [GCC_BLSP1_QUP4_BCR] = { 0x126976 },
>> - [GCC_BLSP1_QUP5_BCR] = { 0x135168 },
>> - [GCC_BLSP1_QUP6_BCR] = { 0x143360 },
>> - [GCC_BLSP2_QUP1_BCR] = { 0x155648 },
>> - [GCC_BLSP2_QUP2_BCR] = { 0x163840 },
>> - [GCC_BLSP2_QUP3_BCR] = { 0x172032 },
>> - [GCC_BLSP2_QUP4_BCR] = { 0x180224 },
>> - [GCC_BLSP2_QUP5_BCR] = { 0x188416 },
>> - [GCC_BLSP2_QUP6_BCR] = { 0x196608 },
>> - [GCC_PCIE_0_BCR] = { 0x438272 },
>> - [GCC_PDM_BCR] = { 0x208896 },
>> - [GCC_SDCC2_BCR] = { 0x81920 },
>> - [GCC_SDCC4_BCR] = { 0x90112 },
>> - [GCC_TSIF_BCR] = { 0x221184 },
>> - [GCC_UFS_BCR] = { 0x479232 },
>> - [GCC_USB_30_BCR] = { 0x61440 },
>> + [GCC_BLSP1_QUP1_BCR] = { 0x19000 },
>> + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 },
>> + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 },
>> + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 },
>> + [GCC_BLSP1_QUP5_BCR] = { 0x21000 },
>> + [GCC_BLSP1_QUP6_BCR] = { 0x23000 },
>> + [GCC_BLSP2_QUP1_BCR] = { 0x26000 },
>> + [GCC_BLSP2_QUP2_BCR] = { 0x28000 },
>> + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 },
>> + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 },
>> + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 },
>> + [GCC_BLSP2_QUP6_BCR] = { 0x30000 },
>> + [GCC_PCIE_0_BCR] = { 0x6c01c },
>
> I find GCC_PCIE_0_BCR at 0x6b000 and then GCC_PCIE_0_PHY_BCR at 0x6c01c.
Doh. Thanks for the double check. GCC_PCIE_0_PHY_BCR is not defined in
include/dt-bindings/clock/qcom,gcc-msm8998.h so I plan to leave it out
until later.
Expect a v2 shortly.
>
>> + [GCC_PDM_BCR] = { 0x33000 },
>> + [GCC_SDCC2_BCR] = { 0x14000 },
>> + [GCC_SDCC4_BCR] = { 0x16000 },
>> + [GCC_TSIF_BCR] = { 0x36000 },
>> + [GCC_UFS_BCR] = { 0x75000 },
>> + [GCC_USB_30_BCR] = { 0xf000 },
>> };
>
> With this updated, you have my
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Regards,
> Bjorn
>
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] clk: qcom: Fix MSM8998 resets
2018-12-03 16:08 ` Jeffrey Hugo
@ 2018-12-03 17:02 ` Stephen Boyd
2018-12-03 17:19 ` Jeffrey Hugo
0 siblings, 1 reply; 7+ messages in thread
From: Stephen Boyd @ 2018-12-03 17:02 UTC (permalink / raw)
To: Bjorn Andersson, Jeffrey Hugo
Cc: andy.gross, david.brown, mturquette, linux-arm-msm, linux-clk,
linux-kernel
Quoting Jeffrey Hugo (2018-12-03 08:08:46)
> On 12/3/2018 8:55 AM, Bjorn Andersson wrote:
> > On Mon 03 Dec 07:34 PST 2018, Jeffrey Hugo wrote:
> >
> >> The offsets for the defined BCR reset registers does not match the hardware
> >> documentation. Update the values to match the hardware documentation.
> >>
> >
> > Sorry for not spotting this before.
> >
> >> Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
> >> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> >> ---
> >> drivers/clk/qcom/gcc-msm8998.c | 38 +++++++++++++++++++-------------------
> >> 1 file changed, 19 insertions(+), 19 deletions(-)
> >>
> >> diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
> >> index 9f0ae40..01cc555 100644
> >> --- a/drivers/clk/qcom/gcc-msm8998.c
> >> +++ b/drivers/clk/qcom/gcc-msm8998.c
> >> @@ -2742,25 +2742,25 @@ enum {
> >> };
> >>
> >> static const struct qcom_reset_map gcc_msm8998_resets[] = {
> >> - [GCC_BLSP1_QUP1_BCR] = { 0x102400 },
> >> - [GCC_BLSP1_QUP2_BCR] = { 0x110592 },
> >> - [GCC_BLSP1_QUP3_BCR] = { 0x118784 },
> >> - [GCC_BLSP1_QUP4_BCR] = { 0x126976 },
> >> - [GCC_BLSP1_QUP5_BCR] = { 0x135168 },
> >> - [GCC_BLSP1_QUP6_BCR] = { 0x143360 },
> >> - [GCC_BLSP2_QUP1_BCR] = { 0x155648 },
> >> - [GCC_BLSP2_QUP2_BCR] = { 0x163840 },
> >> - [GCC_BLSP2_QUP3_BCR] = { 0x172032 },
> >> - [GCC_BLSP2_QUP4_BCR] = { 0x180224 },
> >> - [GCC_BLSP2_QUP5_BCR] = { 0x188416 },
> >> - [GCC_BLSP2_QUP6_BCR] = { 0x196608 },
> >> - [GCC_PCIE_0_BCR] = { 0x438272 },
> >> - [GCC_PDM_BCR] = { 0x208896 },
> >> - [GCC_SDCC2_BCR] = { 0x81920 },
> >> - [GCC_SDCC4_BCR] = { 0x90112 },
> >> - [GCC_TSIF_BCR] = { 0x221184 },
> >> - [GCC_UFS_BCR] = { 0x479232 },
> >> - [GCC_USB_30_BCR] = { 0x61440 },
> >> + [GCC_BLSP1_QUP1_BCR] = { 0x19000 },
> >> + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 },
> >> + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 },
> >> + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 },
> >> + [GCC_BLSP1_QUP5_BCR] = { 0x21000 },
> >> + [GCC_BLSP1_QUP6_BCR] = { 0x23000 },
> >> + [GCC_BLSP2_QUP1_BCR] = { 0x26000 },
> >> + [GCC_BLSP2_QUP2_BCR] = { 0x28000 },
> >> + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 },
> >> + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 },
> >> + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 },
> >> + [GCC_BLSP2_QUP6_BCR] = { 0x30000 },
> >> + [GCC_PCIE_0_BCR] = { 0x6c01c },
> >
> > I find GCC_PCIE_0_BCR at 0x6b000 and then GCC_PCIE_0_PHY_BCR at 0x6c01c.
>
> Doh. Thanks for the double check. GCC_PCIE_0_PHY_BCR is not defined in
> include/dt-bindings/clock/qcom,gcc-msm8998.h so I plan to leave it out
> until later.
>
> Expect a v2 shortly.
Will you add GCC_PCIE0_PHY_BCR shortly so we don't have to add it later
on when it becomes critical?
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] clk: qcom: Fix MSM8998 resets
2018-12-03 17:02 ` Stephen Boyd
@ 2018-12-03 17:19 ` Jeffrey Hugo
2018-12-03 17:52 ` Stephen Boyd
0 siblings, 1 reply; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-03 17:19 UTC (permalink / raw)
To: Stephen Boyd, Bjorn Andersson
Cc: andy.gross, david.brown, mturquette, linux-arm-msm, linux-clk,
linux-kernel
On 12/3/2018 10:02 AM, Stephen Boyd wrote:
> Quoting Jeffrey Hugo (2018-12-03 08:08:46)
>> On 12/3/2018 8:55 AM, Bjorn Andersson wrote:
>>> On Mon 03 Dec 07:34 PST 2018, Jeffrey Hugo wrote:
>>>
>>>> The offsets for the defined BCR reset registers does not match the hardware
>>>> documentation. Update the values to match the hardware documentation.
>>>>
>>>
>>> Sorry for not spotting this before.
>>>
>>>> Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
>>>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>>>> ---
>>>> drivers/clk/qcom/gcc-msm8998.c | 38 +++++++++++++++++++-------------------
>>>> 1 file changed, 19 insertions(+), 19 deletions(-)
>>>>
>>>> diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
>>>> index 9f0ae40..01cc555 100644
>>>> --- a/drivers/clk/qcom/gcc-msm8998.c
>>>> +++ b/drivers/clk/qcom/gcc-msm8998.c
>>>> @@ -2742,25 +2742,25 @@ enum {
>>>> };
>>>>
>>>> static const struct qcom_reset_map gcc_msm8998_resets[] = {
>>>> - [GCC_BLSP1_QUP1_BCR] = { 0x102400 },
>>>> - [GCC_BLSP1_QUP2_BCR] = { 0x110592 },
>>>> - [GCC_BLSP1_QUP3_BCR] = { 0x118784 },
>>>> - [GCC_BLSP1_QUP4_BCR] = { 0x126976 },
>>>> - [GCC_BLSP1_QUP5_BCR] = { 0x135168 },
>>>> - [GCC_BLSP1_QUP6_BCR] = { 0x143360 },
>>>> - [GCC_BLSP2_QUP1_BCR] = { 0x155648 },
>>>> - [GCC_BLSP2_QUP2_BCR] = { 0x163840 },
>>>> - [GCC_BLSP2_QUP3_BCR] = { 0x172032 },
>>>> - [GCC_BLSP2_QUP4_BCR] = { 0x180224 },
>>>> - [GCC_BLSP2_QUP5_BCR] = { 0x188416 },
>>>> - [GCC_BLSP2_QUP6_BCR] = { 0x196608 },
>>>> - [GCC_PCIE_0_BCR] = { 0x438272 },
>>>> - [GCC_PDM_BCR] = { 0x208896 },
>>>> - [GCC_SDCC2_BCR] = { 0x81920 },
>>>> - [GCC_SDCC4_BCR] = { 0x90112 },
>>>> - [GCC_TSIF_BCR] = { 0x221184 },
>>>> - [GCC_UFS_BCR] = { 0x479232 },
>>>> - [GCC_USB_30_BCR] = { 0x61440 },
>>>> + [GCC_BLSP1_QUP1_BCR] = { 0x19000 },
>>>> + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 },
>>>> + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 },
>>>> + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 },
>>>> + [GCC_BLSP1_QUP5_BCR] = { 0x21000 },
>>>> + [GCC_BLSP1_QUP6_BCR] = { 0x23000 },
>>>> + [GCC_BLSP2_QUP1_BCR] = { 0x26000 },
>>>> + [GCC_BLSP2_QUP2_BCR] = { 0x28000 },
>>>> + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 },
>>>> + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 },
>>>> + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 },
>>>> + [GCC_BLSP2_QUP6_BCR] = { 0x30000 },
>>>> + [GCC_PCIE_0_BCR] = { 0x6c01c },
>>>
>>> I find GCC_PCIE_0_BCR at 0x6b000 and then GCC_PCIE_0_PHY_BCR at 0x6c01c.
>>
>> Doh. Thanks for the double check. GCC_PCIE_0_PHY_BCR is not defined in
>> include/dt-bindings/clock/qcom,gcc-msm8998.h so I plan to leave it out
>> until later.
>>
>> Expect a v2 shortly.
>
> Will you add GCC_PCIE0_PHY_BCR shortly so we don't have to add it later
> on when it becomes critical?
>
My plan was to let it sit until it becomes necessary. I'm working on
USB and found that GCC_QUSB2PHY_PRIM_BCR, GCC_USB3_PHY_BCR, and
GCC_USB3PHY_PHY_BCR are also missing, so I suspect there are others.
Would you prefer I send a follow up that adds the PCIE phy and the USB
resets?
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] clk: qcom: Fix MSM8998 resets
2018-12-03 17:19 ` Jeffrey Hugo
@ 2018-12-03 17:52 ` Stephen Boyd
2018-12-03 17:58 ` Jeffrey Hugo
0 siblings, 1 reply; 7+ messages in thread
From: Stephen Boyd @ 2018-12-03 17:52 UTC (permalink / raw)
To: Bjorn Andersson, Jeffrey Hugo
Cc: andy.gross, david.brown, mturquette, linux-arm-msm, linux-clk,
linux-kernel
Quoting Jeffrey Hugo (2018-12-03 09:19:20)
> On 12/3/2018 10:02 AM, Stephen Boyd wrote:
> > Quoting Jeffrey Hugo (2018-12-03 08:08:46)
> >> On 12/3/2018 8:55 AM, Bjorn Andersson wrote:
> >>> On Mon 03 Dec 07:34 PST 2018, Jeffrey Hugo wrote:
> >>>
> >>>> The offsets for the defined BCR reset registers does not match the hardware
> >>>> documentation. Update the values to match the hardware documentation.
> >>>>
> >>>
> >>> Sorry for not spotting this before.
> >>>
> >>>> Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
> >>>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> >>>> ---
> >>>> drivers/clk/qcom/gcc-msm8998.c | 38 +++++++++++++++++++-------------------
> >>>> 1 file changed, 19 insertions(+), 19 deletions(-)
> >>>>
> >>>> diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
> >>>> index 9f0ae40..01cc555 100644
> >>>> --- a/drivers/clk/qcom/gcc-msm8998.c
> >>>> +++ b/drivers/clk/qcom/gcc-msm8998.c
> >>>> @@ -2742,25 +2742,25 @@ enum {
> >>>> };
> >>>>
> >>>> static const struct qcom_reset_map gcc_msm8998_resets[] = {
> >>>> - [GCC_BLSP1_QUP1_BCR] = { 0x102400 },
> >>>> - [GCC_BLSP1_QUP2_BCR] = { 0x110592 },
> >>>> - [GCC_BLSP1_QUP3_BCR] = { 0x118784 },
> >>>> - [GCC_BLSP1_QUP4_BCR] = { 0x126976 },
> >>>> - [GCC_BLSP1_QUP5_BCR] = { 0x135168 },
> >>>> - [GCC_BLSP1_QUP6_BCR] = { 0x143360 },
> >>>> - [GCC_BLSP2_QUP1_BCR] = { 0x155648 },
> >>>> - [GCC_BLSP2_QUP2_BCR] = { 0x163840 },
> >>>> - [GCC_BLSP2_QUP3_BCR] = { 0x172032 },
> >>>> - [GCC_BLSP2_QUP4_BCR] = { 0x180224 },
> >>>> - [GCC_BLSP2_QUP5_BCR] = { 0x188416 },
> >>>> - [GCC_BLSP2_QUP6_BCR] = { 0x196608 },
> >>>> - [GCC_PCIE_0_BCR] = { 0x438272 },
> >>>> - [GCC_PDM_BCR] = { 0x208896 },
> >>>> - [GCC_SDCC2_BCR] = { 0x81920 },
> >>>> - [GCC_SDCC4_BCR] = { 0x90112 },
> >>>> - [GCC_TSIF_BCR] = { 0x221184 },
> >>>> - [GCC_UFS_BCR] = { 0x479232 },
> >>>> - [GCC_USB_30_BCR] = { 0x61440 },
> >>>> + [GCC_BLSP1_QUP1_BCR] = { 0x19000 },
> >>>> + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 },
> >>>> + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 },
> >>>> + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 },
> >>>> + [GCC_BLSP1_QUP5_BCR] = { 0x21000 },
> >>>> + [GCC_BLSP1_QUP6_BCR] = { 0x23000 },
> >>>> + [GCC_BLSP2_QUP1_BCR] = { 0x26000 },
> >>>> + [GCC_BLSP2_QUP2_BCR] = { 0x28000 },
> >>>> + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 },
> >>>> + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 },
> >>>> + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 },
> >>>> + [GCC_BLSP2_QUP6_BCR] = { 0x30000 },
> >>>> + [GCC_PCIE_0_BCR] = { 0x6c01c },
> >>>
> >>> I find GCC_PCIE_0_BCR at 0x6b000 and then GCC_PCIE_0_PHY_BCR at 0x6c01c.
> >>
> >> Doh. Thanks for the double check. GCC_PCIE_0_PHY_BCR is not defined in
> >> include/dt-bindings/clock/qcom,gcc-msm8998.h so I plan to leave it out
> >> until later.
> >>
> >> Expect a v2 shortly.
> >
> > Will you add GCC_PCIE0_PHY_BCR shortly so we don't have to add it later
> > on when it becomes critical?
> >
>
> My plan was to let it sit until it becomes necessary. I'm working on
> USB and found that GCC_QUSB2PHY_PRIM_BCR, GCC_USB3_PHY_BCR, and
> GCC_USB3PHY_PHY_BCR are also missing, so I suspect there are others.
>
> Would you prefer I send a follow up that adds the PCIE phy and the USB
> resets?
Yes please send a followup patch to add all the possible defines and
implementations that you can find. It makes future cross-tree merges
simpler.
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] clk: qcom: Fix MSM8998 resets
2018-12-03 17:52 ` Stephen Boyd
@ 2018-12-03 17:58 ` Jeffrey Hugo
0 siblings, 0 replies; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-03 17:58 UTC (permalink / raw)
To: Stephen Boyd, Bjorn Andersson
Cc: andy.gross, david.brown, mturquette, linux-arm-msm, linux-clk,
linux-kernel
On 12/3/2018 10:52 AM, Stephen Boyd wrote:
> Quoting Jeffrey Hugo (2018-12-03 09:19:20)
>> On 12/3/2018 10:02 AM, Stephen Boyd wrote:
>>> Quoting Jeffrey Hugo (2018-12-03 08:08:46)
>>>> On 12/3/2018 8:55 AM, Bjorn Andersson wrote:
>>>>> On Mon 03 Dec 07:34 PST 2018, Jeffrey Hugo wrote:
>>>>>
>>>>>> The offsets for the defined BCR reset registers does not match the hardware
>>>>>> documentation. Update the values to match the hardware documentation.
>>>>>>
>>>>>
>>>>> Sorry for not spotting this before.
>>>>>
>>>>>> Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
>>>>>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>>>>>> ---
>>>>>> drivers/clk/qcom/gcc-msm8998.c | 38 +++++++++++++++++++-------------------
>>>>>> 1 file changed, 19 insertions(+), 19 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
>>>>>> index 9f0ae40..01cc555 100644
>>>>>> --- a/drivers/clk/qcom/gcc-msm8998.c
>>>>>> +++ b/drivers/clk/qcom/gcc-msm8998.c
>>>>>> @@ -2742,25 +2742,25 @@ enum {
>>>>>> };
>>>>>>
>>>>>> static const struct qcom_reset_map gcc_msm8998_resets[] = {
>>>>>> - [GCC_BLSP1_QUP1_BCR] = { 0x102400 },
>>>>>> - [GCC_BLSP1_QUP2_BCR] = { 0x110592 },
>>>>>> - [GCC_BLSP1_QUP3_BCR] = { 0x118784 },
>>>>>> - [GCC_BLSP1_QUP4_BCR] = { 0x126976 },
>>>>>> - [GCC_BLSP1_QUP5_BCR] = { 0x135168 },
>>>>>> - [GCC_BLSP1_QUP6_BCR] = { 0x143360 },
>>>>>> - [GCC_BLSP2_QUP1_BCR] = { 0x155648 },
>>>>>> - [GCC_BLSP2_QUP2_BCR] = { 0x163840 },
>>>>>> - [GCC_BLSP2_QUP3_BCR] = { 0x172032 },
>>>>>> - [GCC_BLSP2_QUP4_BCR] = { 0x180224 },
>>>>>> - [GCC_BLSP2_QUP5_BCR] = { 0x188416 },
>>>>>> - [GCC_BLSP2_QUP6_BCR] = { 0x196608 },
>>>>>> - [GCC_PCIE_0_BCR] = { 0x438272 },
>>>>>> - [GCC_PDM_BCR] = { 0x208896 },
>>>>>> - [GCC_SDCC2_BCR] = { 0x81920 },
>>>>>> - [GCC_SDCC4_BCR] = { 0x90112 },
>>>>>> - [GCC_TSIF_BCR] = { 0x221184 },
>>>>>> - [GCC_UFS_BCR] = { 0x479232 },
>>>>>> - [GCC_USB_30_BCR] = { 0x61440 },
>>>>>> + [GCC_BLSP1_QUP1_BCR] = { 0x19000 },
>>>>>> + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 },
>>>>>> + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 },
>>>>>> + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 },
>>>>>> + [GCC_BLSP1_QUP5_BCR] = { 0x21000 },
>>>>>> + [GCC_BLSP1_QUP6_BCR] = { 0x23000 },
>>>>>> + [GCC_BLSP2_QUP1_BCR] = { 0x26000 },
>>>>>> + [GCC_BLSP2_QUP2_BCR] = { 0x28000 },
>>>>>> + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 },
>>>>>> + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 },
>>>>>> + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 },
>>>>>> + [GCC_BLSP2_QUP6_BCR] = { 0x30000 },
>>>>>> + [GCC_PCIE_0_BCR] = { 0x6c01c },
>>>>>
>>>>> I find GCC_PCIE_0_BCR at 0x6b000 and then GCC_PCIE_0_PHY_BCR at 0x6c01c.
>>>>
>>>> Doh. Thanks for the double check. GCC_PCIE_0_PHY_BCR is not defined in
>>>> include/dt-bindings/clock/qcom,gcc-msm8998.h so I plan to leave it out
>>>> until later.
>>>>
>>>> Expect a v2 shortly.
>>>
>>> Will you add GCC_PCIE0_PHY_BCR shortly so we don't have to add it later
>>> on when it becomes critical?
>>>
>>
>> My plan was to let it sit until it becomes necessary. I'm working on
>> USB and found that GCC_QUSB2PHY_PRIM_BCR, GCC_USB3_PHY_BCR, and
>> GCC_USB3PHY_PHY_BCR are also missing, so I suspect there are others.
>>
>> Would you prefer I send a follow up that adds the PCIE phy and the USB
>> resets?
>
> Yes please send a followup patch to add all the possible defines and
> implementations that you can find. It makes future cross-tree merges
> simpler.
>
Ok, will do. Will need a bit of time to review the hardware
documentation to enumerate a comprehensive list. I'm thinking by the
end of the week.
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-12-03 17:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-03 15:34 [PATCH] clk: qcom: Fix MSM8998 resets Jeffrey Hugo
2018-12-03 15:55 ` Bjorn Andersson
2018-12-03 16:08 ` Jeffrey Hugo
2018-12-03 17:02 ` Stephen Boyd
2018-12-03 17:19 ` Jeffrey Hugo
2018-12-03 17:52 ` Stephen Boyd
2018-12-03 17:58 ` Jeffrey Hugo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).