* [PATCH v1 0/4] add MTK reboot mode driver
[not found] <1574746264-507-1-git-send-email-freddy.hsin@mediatek.com>
@ 2019-11-26 5:40 ` Freddy Hsin (辛恒豐)
0 siblings, 0 replies; only message in thread
From: Freddy Hsin (辛恒豐) @ 2019-11-26 5:40 UTC (permalink / raw)
To: sre, linux-pm, linux-kernel, wim, linux, matthias.bgg,
linux-watchdog, linux-arm-kernel, linux-mediatek, robh+dt,
mark.rutland, devicetree
Cc: Chang-An Chen (陳昶安),
wsd_upstream, Freddy Hsin (辛恒豐)
This driver parses the reboot commands like "reboot bootloader"
and "reboot recovery" to get a boot mode described in the device tree , then call the write interfae to store the boot mode in mtk RGU (reset generation unit) non-volatile register, which can be read by the bootloader after system reboot, then the bootloader can take different action according to the mode stored.
Freddy Hsin (4):
power: reset: add reboot mode driver
watchdog: populate reboot mode node in toprgu node of MTK RGU (Reset
Generation Unit)
soc: mediatek: add reboot-mode header
dt-binding: power: reset: Add documentation for MTK RGU (Reset
Gernation Unit) reboot driver
.../devicetree/bindings/power/reset/mtk-reboot.txt | 30 +++++
drivers/power/reset/Kconfig | 11 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/mtk-reboot.c | 116 ++++++++++++++++++++
drivers/watchdog/mtk_wdt.c | 3 +
include/dt-bindings/soc/mediatek,boot-mode.h | 17 +++
6 files changed, 178 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/mtk-reboot.txt
create mode 100644 drivers/power/reset/mtk-reboot.c create mode 100644 include/dt-bindings/soc/mediatek,boot-mode.h
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2019-11-26 5:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1574746264-507-1-git-send-email-freddy.hsin@mediatek.com>
2019-11-26 5:40 ` [PATCH v1 0/4] add MTK reboot mode driver Freddy Hsin (辛恒豐)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).