[PATCH v2 00/12] SM6115 DTS changes

[PATCH v2 00/12] SM6115 DTS changes

[Adam Skladowski]

This patch series adds bunch of new nodes
also it fixes some small nitpicks in yamls and adds compatible.

Changes since v1
================
1. Changed title for mdss yaml patch
2. Added missing dmas to spi0
3. Wired freq domains to CPUs
4. Added R-b/Ack tags
5. Reworded smmu dts patch

Adam Skladowski (12):
  dt-bindings: display: msm: Rename mdss node name in example
  dt-bindings: thermal: tsens: Add SM6115 compatible
  arm64: dts: qcom: sm6115: Add cpufreq-hw support
  arm64: dts: qcom: sm6115: Add TSENS node
  arm64: dts: qcom: sm6115: Add PRNG node
  arm64: dts: qcom: sm6115: Add rpm-stats node
  arm64: dts: qcom: sm6115: Add dispcc node
  arm64: dts: qcom: sm6115: Add mdss/dpu node
  arm64: dts: qcom: sm6115: Add GPI DMA
  arm64: dts: qcom: sm6115: Add i2c/spi nodes
  arm64: dts: qcom: sm6115: Add WCN node.
  arm64: dts: qcom: sm6115: Add smmu fallback to qcom generic compatible

 .../display/msm/qcom,qcm2290-mdss.yaml        |   2 +-
 .../display/msm/qcom,sm6115-mdss.yaml         |   2 +-
 .../bindings/thermal/qcom-tsens.yaml          |   1 +
 arch/arm64/boot/dts/qcom/sm6115.dtsi          | 573 +++++++++++++++++-
 4 files changed, 575 insertions(+), 3 deletions(-)

-- 
2.25.1

[PATCH v2 01/12] dt-bindings: display: msm: Rename mdss node name in example

[Adam Skladowski]

Follow other YAMLs and replace mdss name into display-subystem.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 .../devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml      | 2 +-
 .../devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
index d6f043a4b08d..4795e13c7b59 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -72,7 +72,7 @@ examples:
     #include <dt-bindings/interconnect/qcom,qcm2290.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
-    mdss@5e00000 {
+    display-subsystem@5e00000 {
         #address-cells = <1>;
         #size-cells = <1>;
         compatible = "qcom,qcm2290-mdss";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
index a86d7f53fa84..886858ef6700 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -62,7 +62,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
-    mdss@5e00000 {
+    display-subsystem@5e00000 {
         #address-cells = <1>;
         #size-cells = <1>;
         compatible = "qcom,sm6115-mdss";
-- 
2.25.1

Re: [PATCH v2 01/12] dt-bindings: display: msm: Rename mdss node name in example

[Krzysztof Kozlowski]

On 30/11/2022 21:09, Adam Skladowski wrote:
> Follow other YAMLs and replace mdss name into display-subystem.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2 01/12] dt-bindings: display: msm: Rename mdss node name in example

[Dmitry Baryshkov]

On 30/11/2022 22:09, Adam Skladowski wrote:
> Follow other YAMLs and replace mdss name into display-subystem.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

We will pick this into msm-fixes during the next cycle.

> ---
>   .../devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml      | 2 +-
>   .../devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml       | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
> index d6f043a4b08d..4795e13c7b59 100644
> --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
> @@ -72,7 +72,7 @@ examples:
>       #include <dt-bindings/interconnect/qcom,qcm2290.h>
>       #include <dt-bindings/power/qcom-rpmpd.h>
>   
> -    mdss@5e00000 {
> +    display-subsystem@5e00000 {
>           #address-cells = <1>;
>           #size-cells = <1>;
>           compatible = "qcom,qcm2290-mdss";
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
> index a86d7f53fa84..886858ef6700 100644
> --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
> @@ -62,7 +62,7 @@ examples:
>       #include <dt-bindings/interrupt-controller/arm-gic.h>
>       #include <dt-bindings/power/qcom-rpmpd.h>
>   
> -    mdss@5e00000 {
> +    display-subsystem@5e00000 {
>           #address-cells = <1>;
>           #size-cells = <1>;
>           compatible = "qcom,sm6115-mdss";

-- 
With best wishes
Dmitry

Re: [PATCH v2 01/12] dt-bindings: display: msm: Rename mdss node name in example

[Abhinav Kumar]

On 12/1/2022 11:54 AM, Dmitry Baryshkov wrote:
> On 30/11/2022 22:09, Adam Skladowski wrote:
>> Follow other YAMLs and replace mdss name into display-subystem.
>>
>> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Going to add two fixes tags here as we are touching two chipsets:

Fixes: b93bdff44a85 ("dt-bindings: display/msm: add support for SM6115")
Fixes: 06097b13ef97 ("dt-bindings: display/msm: split dpu-qcm2290 into 
DPU and MDSS parts")

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

> 
> We will pick this into msm-fixes during the next cycle.

Yes, we can with the above fixes tags but first, can you please send a 
MR from msm-next-lumag to msm-next? So that I can send a MR for fixes to 
msm-next.

ATM, they are out of sync.


> 
>> ---
>>   .../devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml      | 2 +-
>>   .../devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml       | 2 +-
>>   2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml 
>> b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>> index d6f043a4b08d..4795e13c7b59 100644
>> --- 
>> a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>> +++ 
>> b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>> @@ -72,7 +72,7 @@ examples:
>>       #include <dt-bindings/interconnect/qcom,qcm2290.h>
>>       #include <dt-bindings/power/qcom-rpmpd.h>
>> -    mdss@5e00000 {
>> +    display-subsystem@5e00000 {
>>           #address-cells = <1>;
>>           #size-cells = <1>;
>>           compatible = "qcom,qcm2290-mdss";
>> diff --git 
>> a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml 
>> b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>> index a86d7f53fa84..886858ef6700 100644
>> --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>> @@ -62,7 +62,7 @@ examples:
>>       #include <dt-bindings/interrupt-controller/arm-gic.h>
>>       #include <dt-bindings/power/qcom-rpmpd.h>
>> -    mdss@5e00000 {
>> +    display-subsystem@5e00000 {
>>           #address-cells = <1>;
>>           #size-cells = <1>;
>>           compatible = "qcom,sm6115-mdss";
> 

Re: [PATCH v2 01/12] dt-bindings: display: msm: Rename mdss node name in example

[Dmitry Baryshkov]

On 13 December 2022 23:53:48 EET, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
>
>
>On 12/1/2022 11:54 AM, Dmitry Baryshkov wrote:
>> On 30/11/2022 22:09, Adam Skladowski wrote:
>>> Follow other YAMLs and replace mdss name into display-subystem.
>>> 
>>> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
>> 
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
>Going to add two fixes tags here as we are touching two chipsets:
>
>Fixes: b93bdff44a85 ("dt-bindings: display/msm: add support for SM6115")
>Fixes: 06097b13ef97 ("dt-bindings: display/msm: split dpu-qcm2290 into DPU and MDSS parts")

Note, your tag gif wrapped, so patchwork will pick it up incorrectly.

>
>Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
>
>> 
>> We will pick this into msm-fixes during the next cycle.
>
>Yes, we can with the above fixes tags but first, can you please send a MR from msm-next-lumag to msm-next? So that I can send a MR for fixes to msm-next.

This would create an additional merge commit in msm-next for no particular reason. You can branch -fixes from rc1, or from the msm-next-lumag and then send MR to msm-next.

>
>ATM, they are out of sync.
>
>
>> 
>>> ---
>>>   .../devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml      | 2 +-
>>>   .../devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml       | 2 +-
>>>   2 files changed, 2 insertions(+), 2 deletions(-)
>>> 
>>> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>>> index d6f043a4b08d..4795e13c7b59 100644
>>> --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>>> +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>>> @@ -72,7 +72,7 @@ examples:
>>>       #include <dt-bindings/interconnect/qcom,qcm2290.h>
>>>       #include <dt-bindings/power/qcom-rpmpd.h>
>>> -    mdss@5e00000 {
>>> +    display-subsystem@5e00000 {
>>>           #address-cells = <1>;
>>>           #size-cells = <1>;
>>>           compatible = "qcom,qcm2290-mdss";
>>> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>>> index a86d7f53fa84..886858ef6700 100644
>>> --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>>> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>>> @@ -62,7 +62,7 @@ examples:
>>>       #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>       #include <dt-bindings/power/qcom-rpmpd.h>
>>> -    mdss@5e00000 {
>>> +    display-subsystem@5e00000 {
>>>           #address-cells = <1>;
>>>           #size-cells = <1>;
>>>           compatible = "qcom,sm6115-mdss";
>> 

-- 
With best wishes
Dmitry

Re: [PATCH v2 01/12] dt-bindings: display: msm: Rename mdss node name in example

[Abhinav Kumar]

On 12/13/2022 2:11 PM, Dmitry Baryshkov wrote:
> 
> 
> On 13 December 2022 23:53:48 EET, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
>>
>>
>> On 12/1/2022 11:54 AM, Dmitry Baryshkov wrote:
>>> On 30/11/2022 22:09, Adam Skladowski wrote:
>>>> Follow other YAMLs and replace mdss name into display-subystem.
>>>>
>>>> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
>>>
>>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>
>> Going to add two fixes tags here as we are touching two chipsets:
>>
>> Fixes: b93bdff44a85 ("dt-bindings: display/msm: add support for SM6115")
>> Fixes: 06097b13ef97 ("dt-bindings: display/msm: split dpu-qcm2290 into DPU and MDSS parts")
> 
> Note, your tag gif wrapped, so patchwork will pick it up incorrectly.

Yes, this is a mail client issue. Am aware of it , will fix it up when i 
apply it.

> 
>>
>> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
>>
>>>
>>> We will pick this into msm-fixes during the next cycle.
>>
>> Yes, we can with the above fixes tags but first, can you please send a MR from msm-next-lumag to msm-next? So that I can send a MR for fixes to msm-next.
> 
> This would create an additional merge commit in msm-next for no particular reason. You can branch -fixes from rc1, or from the msm-next-lumag and then send MR to msm-next.

So msm-next would need to be updated then to rc1 to accept that MR. Rob?

> 
>>
>> ATM, they are out of sync.
>>
>>
>>>
>>>> ---
>>>>    .../devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml      | 2 +-
>>>>    .../devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml       | 2 +-
>>>>    2 files changed, 2 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>>>> index d6f043a4b08d..4795e13c7b59 100644
>>>> --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>>>> +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
>>>> @@ -72,7 +72,7 @@ examples:
>>>>        #include <dt-bindings/interconnect/qcom,qcm2290.h>
>>>>        #include <dt-bindings/power/qcom-rpmpd.h>
>>>> -    mdss@5e00000 {
>>>> +    display-subsystem@5e00000 {
>>>>            #address-cells = <1>;
>>>>            #size-cells = <1>;
>>>>            compatible = "qcom,qcm2290-mdss";
>>>> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>>>> index a86d7f53fa84..886858ef6700 100644
>>>> --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>>>> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>>>> @@ -62,7 +62,7 @@ examples:
>>>>        #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>        #include <dt-bindings/power/qcom-rpmpd.h>
>>>> -    mdss@5e00000 {
>>>> +    display-subsystem@5e00000 {
>>>>            #address-cells = <1>;
>>>>            #size-cells = <1>;
>>>>            compatible = "qcom,sm6115-mdss";
>>>
> 

Re: [PATCH v2 01/12] dt-bindings: display: msm: Rename mdss node name in example

[Dmitry Baryshkov]

14 декабря 2022 г. 00:11:58 GMT+02:00, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> пишет:
>
>
>On 13 December 2022 23:53:48 EET, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
>>
>>
>>On 12/1/2022 11:54 AM, Dmitry Baryshkov wrote:
>>> On 30/11/2022 22:09, Adam Skladowski wrote:
>>
>>> 
>>> We will pick this into msm-fixes during the next cycle.
>>
>>Yes, we can with the above fixes tags but first, can you please send a MR from msm-next-lumag to msm-next? So that I can send a MR for fixes to msm-next.
>
>This would create an additional merge commit in msm-next for no particular reason. You can branch -fixes from rc1, or from the msm-next-lumag and then send MR to msm-next.

Another option would be to base msm-fixes on drm-next directly.

>
>>
>>ATM, they are out of sync.
>>
>>

[PATCH v2 02/12] dt-bindings: thermal: tsens: Add SM6115 compatible

[Adam Skladowski]

Document compatible for tsens on Qualcomm SM6115 platform
according to downstream dts it ship v2.4 of IP

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 038d81338fcf..c41fcf404117 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -53,6 +53,7 @@ properties:
               - qcom,sc8280xp-tsens
               - qcom,sdm630-tsens
               - qcom,sdm845-tsens
+              - qcom,sm6115-tsens
               - qcom,sm6350-tsens
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
-- 
2.25.1

Re: [PATCH v2 02/12] dt-bindings: thermal: tsens: Add SM6115 compatible

[Rob Herring]

On Wed, 30 Nov 2022 21:09:40 +0100, Adam Skladowski wrote:
> Document compatible for tsens on Qualcomm SM6115 platform
> according to downstream dts it ship v2.4 of IP
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Since Daniel is out, applied, thanks!

[PATCH v2 03/12] arm64: dts: qcom: sm6115: Add cpufreq-hw support

[Adam Skladowski]

Add cpufreq-hw node and assign qcom,freq-domain properties
to CPUs to enable CPU clock scaling.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 0340ed21be05..2a55087b103e 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -41,6 +41,7 @@ CPU0: cpu@0 {
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -55,6 +56,7 @@ CPU1: cpu@1 {
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 		};
 
 		CPU2: cpu@2 {
@@ -65,6 +67,7 @@ CPU2: cpu@2 {
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 		};
 
 		CPU3: cpu@3 {
@@ -75,6 +78,7 @@ CPU3: cpu@3 {
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 		};
 
 		CPU4: cpu@100 {
@@ -85,6 +89,7 @@ CPU4: cpu@100 {
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -99,6 +104,7 @@ CPU5: cpu@101 {
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 		};
 
 		CPU6: cpu@102 {
@@ -109,6 +115,7 @@ CPU6: cpu@102 {
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 		};
 
 		CPU7: cpu@103 {
@@ -119,6 +126,7 @@ CPU7: cpu@103 {
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 		};
 
 		cpu-map {
@@ -842,6 +850,17 @@ intc: interrupt-controller@f200000 {
 			redistributor-stride = <0x0 0x20000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		cpufreq_hw: cpufreq@f521000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0x0f521000 0x1000>, <0x0f523000 0x1000>;
+
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
 	};
 
 	timer {
-- 
2.25.1

[PATCH v2 04/12] arm64: dts: qcom: sm6115: Add TSENS node

[Adam Skladowski]

Add nodes required for TSENS block using the common qcom,tsens-v2 binding.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 2a55087b103e..a2ac06f4693b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -523,6 +523,17 @@ spmi_bus: spmi@1c40000 {
 			#interrupt-cells = <4>;
 		};
 
+		tsens0: thermal-sensor@4410000 {
+			compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
+			reg = <0x04411000 0x1ff>, /* TM */
+			      <0x04410000 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x045f0000 0x7000>;
-- 
2.25.1

[PATCH v2 05/12] arm64: dts: qcom: sm6115: Add PRNG node

[Adam Skladowski]

Add a node for the PRNG to enable hw-accelerated pseudo-random number
generation.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index a2ac06f4693b..6f4c36f3da40 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -505,6 +505,13 @@ qusb2_hstx_trim: hstx-trim@25b {
 			};
 		};
 
+		rng: rng@1b53000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x01b53000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x01c40000 0x1100>,
-- 
2.25.1

[PATCH v2 06/12] arm64: dts: qcom: sm6115: Add rpm-stats node

[Adam Skladowski]

Add rpm stats node.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 6f4c36f3da40..d0928f19965f 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -546,6 +546,11 @@ rpm_msg_ram: sram@45f0000 {
 			reg = <0x045f0000 0x7000>;
 		};
 
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x04690000 0x10000>;
+		};
+
 		sdhc_1: mmc@4744000 {
 			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>;
-- 
2.25.1

[PATCH v2 07/12] arm64: dts: qcom: sm6115: Add dispcc node

[Adam Skladowski]

Add display clock controller to allow controlling display related clocks.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index d0928f19965f..6e0699649257 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+#include <dt-bindings/clock/qcom,sm6115-dispcc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -725,6 +726,19 @@ usb_1_dwc3: usb@4e00000 {
 			};
 		};
 
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,sm6115-dispcc";
+			reg = <0x05f00000 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&dsi0_phy 0>,
+				 <&dsi0_phy 1>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
 			reg = <0x0c600000 0x80000>;
-- 
2.25.1

[PATCH v2 08/12] arm64: dts: qcom: sm6115: Add mdss/dpu node

[Adam Skladowski]

Add mdss and dpu node to enable display support on SM6115.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 183 +++++++++++++++++++++++++++
 1 file changed, 183 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 6e0699649257..c476b5ecb62b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -726,6 +726,189 @@ usb_1_dwc3: usb@4e00000 {
 			};
 		};
 
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,sm6115-mdss";
+			reg = <0x05e00000 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,sm6115-dpu";
+				reg = <0x05e01000 0x8f000>,
+				      <0x05eb0000 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "rot",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			dsi0: dsi@5e94000 {
+				compatible = "qcom,dsi-ctrl-6g-qcm2290";
+				reg = <0x05e94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				phys = <&dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+			};
+
+			dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x05e94400 0x100>,
+				      <0x05e94500 0x300>,
+				      <0x05e94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
 		dispcc: clock-controller@5f00000 {
 			compatible = "qcom,sm6115-dispcc";
 			reg = <0x05f00000 0x20000>;
-- 
2.25.1

[PATCH v2 09/12] arm64: dts: qcom: sm6115: Add GPI DMA

[Adam Skladowski]

Add GPI DMA node which will be wired to i2c/spi/uart.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index c476b5ecb62b..b30a5485671d 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -681,6 +681,26 @@ ufs_mem_phy_lanes: phy@4807400 {
 			};
 		};
 
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x04a00000 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels =  <10>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
 		usb_1: usb@4ef8800 {
 			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
 			reg = <0x04ef8800 0x400>;
-- 
2.25.1

[PATCH v2 10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes

[Adam Skladowski]

Add I2C/SPI nodes for SM6115.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 290 +++++++++++++++++++++++++++
 1 file changed, 290 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index b30a5485671d..e676b9d117e3 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/qcom,gcc-sm6115.h>
 #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -365,6 +366,90 @@ tlmm: pinctrl@500000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";
@@ -701,6 +786,211 @@ gpi_dma0: dma-controller@4a00000 {
 			status = "disabled";
 		};
 
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x04ac0000 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		usb_1: usb@4ef8800 {
 			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
 			reg = <0x04ef8800 0x400>;
-- 
2.25.1

Re: [PATCH v2 10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes

[Konrad Dybcio]

On 30.11.2022 21:09, Adam Skladowski wrote:
> Add I2C/SPI nodes for SM6115.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 290 +++++++++++++++++++++++++++
>  1 file changed, 290 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index b30a5485671d..e676b9d117e3 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -6,6 +6,7 @@
>  #include <dt-bindings/clock/qcom,gcc-sm6115.h>
>  #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
>  #include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
> @@ -365,6 +366,90 @@ tlmm: pinctrl@500000 {
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
>  
> +			qup_i2c0_default: qup-i2c0-default-state {
> +				pins = "gpio0", "gpio1";
> +				function = "qup0";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c1_default: qup-i2c1-default-state {
> +				pins = "gpio4", "gpio5";
> +				function = "qup1";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c2_default: qup-i2c2-default-state {
> +				pins = "gpio6", "gpio7";
> +				function = "qup2";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c3_default: qup-i2c3-default-state {
> +				pins = "gpio8", "gpio9";
> +				function = "qup3";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c4_default: qup-i2c4-default-state {
> +				pins = "gpio12", "gpio13";
> +				function = "qup4";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c5_default: qup-i2c5-default-state {
> +				pins = "gpio14", "gpio15";
> +				function = "qup5";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi0_default: qup-spi0-default-state {
> +				pins = "gpio0", "gpio1","gpio2", "gpio3";
> +				function = "qup0";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi1_default: qup-spi1-default-state {
> +				pins = "gpio4", "gpio5", "gpio69", "gpio70";
> +				function = "qup1";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi2_default: qup-spi2-default-state {
> +				pins = "gpio6", "gpio7", "gpio71", "gpio80";
> +				function = "qup2";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi3_default: qup-spi3-default-state {
> +				pins = "gpio8", "gpio9", "gpio10", "gpio11";
> +				function = "qup3";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi4_default: qup-spi4-default-state {
> +				pins = "gpio12", "gpio13", "gpio96", "gpio97";
> +				function = "qup4";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi5_default: qup-spi5-default-state {
> +				pins = "gpio14", "gpio15", "gpio16", "gpio17";
> +				function = "qup5";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
>  			sdc1_state_on: sdc1-on-state {
>  				clk-pins {
>  					pins = "sdc1_clk";
> @@ -701,6 +786,211 @@ gpi_dma0: dma-controller@4a00000 {
>  			status = "disabled";
>  		};
>  
> +		qupv3_id_0: geniqup@4ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x04ac0000 0x2000>;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			iommus = <&apps_smmu 0xe3 0x0>;
> +			ranges;
> +			status = "disabled";
> +
> +			i2c0: i2c@4a80000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a80000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c0_default>;
> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi0: spi@4a80000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x04a80000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi0_default>;
> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@4a84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a84000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c1_default>;
> +				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi1: spi@4a84000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x04a84000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi1_default>;
> +				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@4a88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a88000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c2_default>;
> +				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi2: spi@4a88000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x04a88000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi2_default>;
> +				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@4a8c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a8c000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c3_default>;
> +				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi3: spi@4a8c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x04a8c000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi3_default>;
> +				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@4a90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a90000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c4_default>;
> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@4a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x04a90000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi4_default>;
> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@4a94000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a94000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c5_default>;
> +				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@4a94000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x04a94000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi5_default>;
> +				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
>  		usb_1: usb@4ef8800 {
>  			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
>  			reg = <0x04ef8800 0x400>;

[PATCH v2 11/12] arm64: dts: qcom: sm6115: Add WCN node.

[Adam Skladowski]

Add WCN node to allow using wifi module.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index e676b9d117e3..38b903592a57 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1305,6 +1305,28 @@ apps_smmu: iommu@c600000 {
 				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0c800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x1a0 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
 		apcs_glb: mailbox@f111000 {
 			compatible = "qcom,sm6115-apcs-hmss-global";
 			reg = <0x0f111000 0x1000>;
-- 
2.25.1

Re: [PATCH v2 11/12] arm64: dts: qcom: sm6115: Add WCN node.

[Krzysztof Kozlowski]

On 30/11/2022 21:09, Adam Skladowski wrote:
> Add WCN node to allow using wifi module.
> 

A nit: Drop full stop from commit subject.

Best regards,
Krzysztof

Re: [PATCH v2 11/12] arm64: dts: qcom: sm6115: Add WCN node.

[Bjorn Andersson]

On Thu, Dec 01, 2022 at 11:38:16AM +0100, Krzysztof Kozlowski wrote:
> On 30/11/2022 21:09, Adam Skladowski wrote:
> > Add WCN node to allow using wifi module.
> > 
> 
> A nit: Drop full stop from commit subject.
> 

Done. Thanks for pointing it out :)

Regards,
Bjorn

> Best regards,
> Krzysztof
> 

[PATCH v2 12/12] arm64: dts: qcom: sm6115: Add smmu fallback to qcom generic compatible

[Adam Skladowski]

Add fallback to generic qcom mmu-500 implementation.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 38b903592a57..572bf04adf90 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1233,7 +1233,7 @@ dispcc: clock-controller@5f00000 {
 		};
 
 		apps_smmu: iommu@c600000 {
-			compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0c600000 0x80000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
-- 
2.25.1

Re: [PATCH v2 12/12] arm64: dts: qcom: sm6115: Add smmu fallback to qcom generic compatible

[Konrad Dybcio]

On 30.11.2022 21:09, Adam Skladowski wrote:
> Add fallback to generic qcom mmu-500 implementation.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 38b903592a57..572bf04adf90 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -1233,7 +1233,7 @@ dispcc: clock-controller@5f00000 {
>  		};
>  
>  		apps_smmu: iommu@c600000 {
> -			compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
> +			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>  			reg = <0x0c600000 0x80000>;
>  			#iommu-cells = <2>;
>  			#global-interrupts = <1>;

Re: (subset) [PATCH v2 00/12] SM6115 DTS changes

[Bjorn Andersson]

On Wed, 30 Nov 2022 21:09:38 +0100, Adam Skladowski wrote:
> This patch series adds bunch of new nodes
> also it fixes some small nitpicks in yamls and adds compatible.
> 
> Changes since v1
> ================
> 1. Changed title for mdss yaml patch
> 2. Added missing dmas to spi0
> 3. Wired freq domains to CPUs
> 4. Added R-b/Ack tags
> 5. Reworded smmu dts patch
> 
> [...]

Applied, thanks!

[03/12] arm64: dts: qcom: sm6115: Add cpufreq-hw support
        commit: aff96846c63ed3e3ed7d5212ea636a422d9694a3
[04/12] arm64: dts: qcom: sm6115: Add TSENS node
        commit: 7b74cba6b13f4bbe1f15e3417f386ed1907ab0ef
[05/12] arm64: dts: qcom: sm6115: Add PRNG node
        commit: fc676b15c065b8d4c750bbaab9914f24829a7a13
[06/12] arm64: dts: qcom: sm6115: Add rpm-stats node
        commit: d18c0077963ae2b6d232f6f3f25fb1ceb875ce7f
[07/12] arm64: dts: qcom: sm6115: Add dispcc node
        commit: 884f95411ba4030ca44436217c6d8df4a960c555
[08/12] arm64: dts: qcom: sm6115: Add mdss/dpu node
        commit: 705e50427d8148211ffd05922bfa6a2520781338
[09/12] arm64: dts: qcom: sm6115: Add GPI DMA
        commit: 1586c5793511d7fb389139ab7aa5dae9118666ad
[10/12] arm64: dts: qcom: sm6115: Add i2c/spi nodes
        commit: 323647d32e83fae7f1a81b40e12ca6b0b63e880c
[11/12] arm64: dts: qcom: sm6115: Add WCN node.
        commit: 245bb9a37c16dc324be60764aa2597aa4704a8e3
[12/12] arm64: dts: qcom: sm6115: Add smmu fallback to qcom generic compatible
        commit: 58a9e83605478e931139b574e43d453851de3a26

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>