* [PATCH v2 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
@ 2019-02-20 18:19 Eric Anholt
2019-02-20 18:19 ` [PATCH v2 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization Eric Anholt
2019-03-04 21:08 ` [PATCH v2 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support Florian Fainelli
0 siblings, 2 replies; 3+ messages in thread
From: Eric Anholt @ 2019-02-20 18:19 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stefan Wahren,
bcm-kernel-feedback-list, Eric Anholt
We don't have ASB master/slave regs for this domain, so just skip that
step.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
---
drivers/soc/bcm/bcm2835-power.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 48412957ec7a..4a1b99b773c0 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -150,7 +150,12 @@ struct bcm2835_power {
static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
{
- u64 start = ktime_get_ns();
+ u64 start;
+
+ if (!reg)
+ return 0;
+
+ start = ktime_get_ns();
/* Enable the module's async AXI bridges. */
ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
@@ -165,7 +170,12 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
{
- u64 start = ktime_get_ns();
+ u64 start;
+
+ if (!reg)
+ return 0;
+
+ start = ktime_get_ns();
/* Enable the module's async AXI bridges. */
ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization.
2019-02-20 18:19 [PATCH v2 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support Eric Anholt
@ 2019-02-20 18:19 ` Eric Anholt
2019-03-04 21:08 ` [PATCH v2 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support Florian Fainelli
1 sibling, 0 replies; 3+ messages in thread
From: Eric Anholt @ 2019-02-20 18:19 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stefan Wahren,
bcm-kernel-feedback-list, Eric Anholt
The clock driver may probe after ours and so we need to pass the
-EPROBE_DEFER out. Fix the other error path while we're here.
v2: Use dom->name instead of dom->gov as the flag for initialized
domains, since we aren't setting up a governor. Make sure to
clear ->clk when no clk is present in the DT.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
---
drivers/soc/bcm/bcm2835-power.c | 35 ++++++++++++++++++++++++++++-----
1 file changed, 30 insertions(+), 5 deletions(-)
diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 4a1b99b773c0..241c4ed80899 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain)
}
}
-static void
+static int
bcm2835_init_power_domain(struct bcm2835_power *power,
int pd_xlate_index, const char *name)
{
@@ -493,6 +493,17 @@ bcm2835_init_power_domain(struct bcm2835_power *power,
struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index];
dom->clk = devm_clk_get(dev->parent, name);
+ if (IS_ERR(dom->clk)) {
+ int ret = PTR_ERR(dom->clk);
+
+ if (ret == -EPROBE_DEFER)
+ return ret;
+
+ /* Some domains don't have a clk, so make sure that we
+ * don't deref an error pointer later.
+ */
+ dom->clk = NULL;
+ }
dom->base.name = name;
dom->base.power_on = bcm2835_power_pd_power_on;
@@ -505,6 +516,8 @@ bcm2835_init_power_domain(struct bcm2835_power *power,
pm_genpd_init(&dom->base, NULL, true);
power->pd_xlate.domains[pd_xlate_index] = &dom->base;
+
+ return 0;
}
/** bcm2835_reset_reset - Resets a block that has a reset line in the
@@ -602,7 +615,7 @@ static int bcm2835_power_probe(struct platform_device *pdev)
{ BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 },
{ BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 },
};
- int ret, i;
+ int ret = 0, i;
u32 id;
power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
@@ -629,8 +642,11 @@ static int bcm2835_power_probe(struct platform_device *pdev)
power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names);
- for (i = 0; i < ARRAY_SIZE(power_domain_names); i++)
- bcm2835_init_power_domain(power, i, power_domain_names[i]);
+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) {
+ ret = bcm2835_init_power_domain(power, i, power_domain_names[i]);
+ if (ret)
+ goto fail;
+ }
for (i = 0; i < ARRAY_SIZE(domain_deps); i++) {
pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base,
@@ -644,12 +660,21 @@ static int bcm2835_power_probe(struct platform_device *pdev)
ret = devm_reset_controller_register(dev, &power->reset);
if (ret)
- return ret;
+ goto fail;
of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate);
dev_info(dev, "Broadcom BCM2835 power domains driver");
return 0;
+
+fail:
+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) {
+ struct generic_pm_domain *dom = &power->domains[i].base;
+
+ if (dom->name)
+ pm_genpd_remove(dom);
+ }
+ return ret;
}
static int bcm2835_power_remove(struct platform_device *pdev)
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
2019-02-20 18:19 [PATCH v2 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support Eric Anholt
2019-02-20 18:19 ` [PATCH v2 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization Eric Anholt
@ 2019-03-04 21:08 ` Florian Fainelli
1 sibling, 0 replies; 3+ messages in thread
From: Florian Fainelli @ 2019-03-04 21:08 UTC (permalink / raw)
To: Eric Anholt, Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stefan Wahren,
bcm-kernel-feedback-list
On 2/20/19 10:19 AM, Eric Anholt wrote:
> We don't have ASB master/slave regs for this domain, so just skip that
> step.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
Eric, do you want put that in a pull request for me to send to the ARM
SoC maintainers?
> ---
> drivers/soc/bcm/bcm2835-power.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
> index 48412957ec7a..4a1b99b773c0 100644
> --- a/drivers/soc/bcm/bcm2835-power.c
> +++ b/drivers/soc/bcm/bcm2835-power.c
> @@ -150,7 +150,12 @@ struct bcm2835_power {
>
> static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
> {
> - u64 start = ktime_get_ns();
> + u64 start;
> +
> + if (!reg)
> + return 0;
> +
> + start = ktime_get_ns();
>
> /* Enable the module's async AXI bridges. */
> ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
> @@ -165,7 +170,12 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
>
> static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
> {
> - u64 start = ktime_get_ns();
> + u64 start;
> +
> + if (!reg)
> + return 0;
> +
> + start = ktime_get_ns();
>
> /* Enable the module's async AXI bridges. */
> ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
>
--
Florian
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-03-04 21:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-20 18:19 [PATCH v2 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support Eric Anholt
2019-02-20 18:19 ` [PATCH v2 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization Eric Anholt
2019-03-04 21:08 ` [PATCH v2 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).