* [PATCH 4/6] Unified AVR32/AT91 MCI Driver Clock Divisor Cap
@ 2009-06-13 1:06 Rob Emanuele
0 siblings, 0 replies; only message in thread
From: Rob Emanuele @ 2009-06-13 1:06 UTC (permalink / raw)
To: Haavard Skinnemoen
Cc: Andrew Victor, Nicolas Ferre, linux-arm-kernel, linux-kernel, drzeus-mmc
This patch adds the compile time configuration option for the
atmel-mci driver to cap the MCI CLKDIV register value to a minimum
value.
This is useful for debugging and for boards that have a long mci clock line.
Please read the whole set, try it out, and comment.
Thank you,
Rob Emanuele
---
drivers/mmc/host/Kconfig | 14 ++++++++++++++
drivers/mmc/host/atmel-mci.c | 10 ++++++++++
2 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 9e24029..9f797b2 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -150,6 +150,20 @@ config MMC_ATMELMCI
endchoice
+config MMC_ATMELMCI_CLKDIV_CAP
+ int "Cap the CLKDIV to keep the controller from going too fast."
+ depends on MMC_ATMELMCI
+ default 0
+ range 0 255
+ help
+ This is the lowest value the clock divisor for the MMC
+ controller can be. Value is between 0 and 255.
+ MCI_CK = MCK/(2*(CLKDIV+1))
+ Raising this value may improve your controller's reliability
+ at the cost of speed.
+
+ If unsure, leave at 0.
+
config MMC_ATMELMCI_ALWAYS_RESET
bool "Reset before every request. Sometimes needed for buggy chips."
depends on MMC_ATMELMCI
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index b133baa..1c1a4b3 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -74,6 +74,10 @@ struct atmel_mci_dma {
#define MMC_ALWAYS_RESET 0
#endif
+#ifndef CONFIG_MMC_ATMELMCI_CLKDIV_CAP
+#define CONFIG_MMC_ATMELMCI_CLKDIV_CAP 0
+#endif
+
/**
* struct atmel_mci - MMC controller state shared between all slots
* @lock: Spinlock protecting the queue and associated data.
@@ -876,6 +880,12 @@ static void atmci_set_ios(struct mmc_host *mmc,
struct mmc_ios *ios)
clock_min, host->bus_hz / (2 * 256));
clkdiv = 255;
}
+ if (clkdiv < CONFIG_MMC_ATMELMCI_CLKDIV_CAP) {
+ dev_warn(&mmc->class_dev,
+ "clkdiv %u too fast; capped using %u\n",
+ clkdiv, CONFIG_MMC_ATMELMCI_CLKDIV_CAP);
+ clkdiv = CONFIG_MMC_ATMELMCI_CLKDIV_CAP;
- Show quoted text -
+ }
host->mode_reg = MCI_MR_CLKDIV(clkdiv);
--
1.6.0.4
--
Robert Emanuele
Crystalfontz America, Inc.
www.crystalfontz.com
rje@crystalfontz.com
+1 509 892 1200
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2009-06-13 1:06 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-06-13 1:06 [PATCH 4/6] Unified AVR32/AT91 MCI Driver Clock Divisor Cap Rob Emanuele
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).