[PATCH 4.9 00/88] 4.9.82-stable review

[PATCH 4.9 00/88] 4.9.82-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.82 release.
There are 88 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.82-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.82-rc1

Steven Rostedt (VMware) <rostedt@goodmis.org>
    ftrace: Remove incorrect setting of glob search field

Eric W. Biederman <ebiederm@xmission.com>
    mn10300/misalignment: Use SIGSEGV SEGV_MAPERR to report a failed user copy

Amir Goldstein <amir73il@gmail.com>
    ovl: fix failure to fsync lower dir

Toshi Kani <toshi.kani@hpe.com>
    acpi, nfit: fix register dimm error handling

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ACPI: sbshc: remove raw pointer from printk() message

Imre Deak <imre.deak@intel.com>
    drm/i915: Avoid PPS HW/SW state mismatch due to rounding

Nikolay Borisov <nborisov@suse.com>
    btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker

Andrey Ryabinin <aryabinin@virtuozzo.com>
    lib/ubsan: add type mismatch handler for new GCC/Clang

Andrew Morton <akpm@linux-foundation.org>
    lib/ubsan.c: s/missaligned/misaligned/

Daniel Lezcano <daniel.lezcano@linaro.org>
    clocksource/drivers/stm32: Fix kernel panic with multiple timers

Bart Van Assche <bart.vanassche@wdc.com>
    pktcdvd: Fix pkt_setup_dev() error path

Mika Westerberg <mika.westerberg@linux.intel.com>
    pinctrl: intel: Initialize GPIO properly when used through irqchip

James Hogan <jhogan@kernel.org>
    EDAC, octeon: Fix an uninitialized variable warning

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: fix futex_atomic_cmpxchg_inatomic

Mikulas Patocka <mpatocka@redhat.com>
    alpha: fix formating of stack content

Mikulas Patocka <mpatocka@redhat.com>
    alpha: fix reboot on Avanti platform

Mikulas Patocka <mpatocka@redhat.com>
    alpha: fix crash if pthread_create races with signal delivery

Eric W. Biederman <ebiederm@xmission.com>
    signal/sh: Ensure si_signo is initialized in do_divide_error

Eric W. Biederman <ebiederm@xmission.com>
    signal/openrisc: Fix do_unaligned_access to send the proper signal

Hans de Goede <hdegoede@redhat.com>
    Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version

Kai-Heng Feng <kai.heng.feng@canonical.com>
    Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"

Hans de Goede <hdegoede@redhat.com>
    Bluetooth: btsdio: Do not bind to non-removable BCM43341

Hans de Goede <hdegoede@redhat.com>
    HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working

Eric Biggers <ebiggers@google.com>
    pipe: fix off-by-one error when checking buffer limits

Eric Biggers <ebiggers@google.com>
    pipe: actually allow root to exceed the pipe buffer limits

Eric Biggers <ebiggers@google.com>
    kernel/relay.c: revert "kernel/relay.c: fix potential memory leak"

Rasmus Villemoes <linux@rasmusvillemoes.dk>
    kernel/async.c: revert "async: simplify lowest_in_progress()"

Heiko Carstens <heiko.carstens@de.ibm.com>
    fs/proc/kcore.c: use probe_kernel_read() instead of memcpy()

Mauro Carvalho Chehab <mchehab@kernel.org>
    media: cxusb, dib0700: ignore XC2028_I2C_FLUSH

Mauro Carvalho Chehab <mchehab@kernel.org>
    media: ts2020: avoid integer overflows on 32 bit machines

Arnd Bergmann <arnd@arndb.de>
    media: dvb-frontends: fix i2c access helpers for KASAN

Martin Kaiser <martin@kaiser.cx>
    watchdog: imx2_wdt: restore previous timeout after suspend+resume

Takashi Iwai <tiwai@suse.de>
    ASoC: skl: Fix kernel warning due to zero NHTL entry

John Keeping <john@metanate.com>
    ASoC: rockchip: i2s: fix playback after runtime resume

James Morse <james.morse@arm.com>
    KVM: arm/arm64: Handle CPU_PM_ENTER_FAILED

Liran Alon <liran.alon@oracle.com>
    KVM: nVMX: Fix races when sending nested PI while dest enters/leaves L2

Marc Zyngier <marc.zyngier@arm.com>
    arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls

LEROY Christophe <christophe.leroy@c-s.fr>
    crypto: talitos - fix Kernel Oops on hashing an empty file

Eric Biggers <ebiggers@google.com>
    crypto: sha512-mb - initialize pending lengths correctly

Horia Geantă <horia.geanta@nxp.com>
    crypto: caam - fix endless loop when DECO acquire fails

Daniel Mentz <danielmentz@google.com>
    media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32

Daniel Mentz <danielmentz@google.com>
    media: v4l2-compat-ioctl32: Copy v4l2_window->global_alpha

Hans Verkuil <hansverk@cisco.com>
    media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: avoid sizeof(type)

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: fix the indentation

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-ioctl.c: don't copy back the result for -ENOTTY

Cong Wang <xiyou.wangcong@gmail.com>
    nsfs: mark dentry with DCACHE_RCUACCESS

Eric Biggers <ebiggers@google.com>
    crypto: poly1305 - remove ->setkey() method

Eric Biggers <ebiggers@google.com>
    crypto: mcryptd - pass through absence of ->setkey()

Eric Biggers <ebiggers@google.com>
    crypto: cryptd - pass through absence of ->setkey()

Eric Biggers <ebiggers@google.com>
    crypto: hash - introduce crypto_hash_alg_has_setkey()

Mika Westerberg <mika.westerberg@linux.intel.com>
    ahci: Add Intel Cannon Lake PCH-H PCI ID

Hans de Goede <hdegoede@redhat.com>
    ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI

Hans de Goede <hdegoede@redhat.com>
    ahci: Annotate PCI ids for mobile Intel chipsets as such

Ivan Vecera <ivecera@redhat.com>
    kernfs: fix regression in kernfs_fop_write caused by wrong type

Trond Myklebust <trond.myklebust@primarydata.com>
    NFS: Fix a race between mmap() and O_DIRECT

Eric Biggers <ebiggers@google.com>
    NFS: reject request for id_legacy key without auxdata

J. Bruce Fields <bfields@redhat.com>
    NFS: commit direct writes even if they fail partially

Trond Myklebust <trond.myklebust@primarydata.com>
    NFS: Add a cond_resched() to nfs_commit_release_pages()

Scott Mayhew <smayhew@redhat.com>
    nfs/pnfs: fix nfs_direct_req ref leak when i/o falls back to the mds

Xiaolei Li <xiaolei.li@mediatek.com>
    ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs

Bradley Bolen <bradleybolen@gmail.com>
    ubi: block: Fix locking for idr_alloc/idr_remove

Sascha Hauer <s.hauer@pengutronix.de>
    ubi: fastmap: Erase outdated anchor PEBs during attach

Miquel Raynal <miquel.raynal@free-electrons.com>
    mtd: nand: sunxi: Fix ECC strength choice

Miquel Raynal <miquel.raynal@free-electrons.com>
    mtd: nand: Fix nand_do_read_oob() return value

Kamal Dasu <kdasu.kdev@gmail.com>
    mtd: nand: brcmnand: Disable prefetch by default

Arnd Bergmann <arnd@arndb.de>
    mtd: cfi: convert inline functions to macros

Arvind Yadav <arvind.yadav.cs@gmail.com>
    media: hdpvr: Fix an error handling path in hdpvr_probe()

Malcolm Priestley <tvboxspy@gmail.com>
    media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tuner

Malcolm Priestley <tvboxspy@gmail.com>
    media: dvb-usb-v2: lmedm04: Improve logic checking of warm start

Mohamed Ghannam <simo.ghannam@gmail.com>
    dccp: CVE-2017-8824: use-after-free in DCCP code

Steven Rostedt (VMware) <rostedt@goodmis.org>
    sched/rt: Up the root domain ref count when passing it around via IPIs

Steven Rostedt (VMware) <rostedt@goodmis.org>
    sched/rt: Use container_of() to get root domain in rto_push_irq_work_func()

Petr Cvek <petr.cvek@tul.cz>
    usb: gadget: uvc: Missing files for configfs interface

Thomas Gleixner <tglx@linutronix.de>
    posix-timer: Properly check sigevent->sigev_notify

Hugh Dickins <hughd@google.com>
    kaiser: fix compile error without vsyscall

Yang Shunyong <shunyong.yang@hxt-semitech.com>
    dmaengine: dmatest: fix container_of member in dmatest_callback

Aurelien Aptel <aaptel@suse.com>
    CIFS: zero sensitive data when freeing

Daniel N Pettersson <danielnp@axis.com>
    cifs: Fix autonegotiate security settings mismatch

Matthew Wilcox <mawilcox@microsoft.com>
    cifs: Fix missing put_xid in cifs_file_strict_mmap

Michal Suchanek <msuchanek@suse.de>
    powerpc/pseries: include linux/types.h in asm/hvcall.h


-------------

Diffstat:

 Makefile                                           |    4 +-
 arch/alpha/kernel/pci_impl.h                       |    3 +-
 arch/alpha/kernel/process.c                        |    3 +-
 arch/alpha/kernel/traps.c                          |   13 +-
 arch/arm/kvm/arm.c                                 |    1 +
 arch/arm/kvm/handle_exit.c                         |   13 +-
 arch/mn10300/mm/misalignment.c                     |    2 +-
 arch/openrisc/kernel/traps.c                       |   10 +-
 arch/powerpc/include/asm/hvcall.h                  |    1 +
 arch/sh/kernel/traps_32.c                          |    3 +-
 arch/x86/crypto/poly1305_glue.c                    |    1 -
 .../x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c |   10 +-
 arch/x86/include/asm/vsyscall.h                    |    2 +-
 arch/x86/kvm/vmx.c                                 |    5 +-
 arch/xtensa/include/asm/futex.h                    |   23 +-
 crypto/ahash.c                                     |   11 +
 crypto/cryptd.c                                    |    3 +-
 crypto/mcryptd.c                                   |    3 +-
 crypto/poly1305_generic.c                          |   17 +-
 drivers/acpi/nfit/core.c                           |    3 +
 drivers/acpi/sbshc.c                               |    4 +-
 drivers/ata/ahci.c                                 |   37 +-
 drivers/block/pktcdvd.c                            |    4 +-
 drivers/bluetooth/btsdio.c                         |    9 +
 drivers/bluetooth/btusb.c                          |   19 +-
 drivers/clocksource/timer-stm32.c                  |    7 +-
 drivers/crypto/caam/ctrl.c                         |    8 +-
 drivers/crypto/talitos.c                           |    4 +
 drivers/dma/dmatest.c                              |    2 +-
 drivers/edac/octeon_edac-lmc.c                     |    1 +
 drivers/gpu/drm/i915/intel_dp.c                    |    6 +
 drivers/hid/hid-core.c                             |   12 +-
 drivers/media/dvb-frontends/ascot2e.c              |    4 +-
 drivers/media/dvb-frontends/cxd2841er.c            |    4 +-
 drivers/media/dvb-frontends/helene.c               |    4 +-
 drivers/media/dvb-frontends/horus3a.c              |    4 +-
 drivers/media/dvb-frontends/itd1000.c              |    5 +-
 drivers/media/dvb-frontends/mt312.c                |    5 +-
 drivers/media/dvb-frontends/stb0899_drv.c          |    3 +-
 drivers/media/dvb-frontends/stb6100.c              |    6 +-
 drivers/media/dvb-frontends/stv0367.c              |    4 +-
 drivers/media/dvb-frontends/stv090x.c              |    4 +-
 drivers/media/dvb-frontends/stv6110x.c             |    4 +-
 drivers/media/dvb-frontends/ts2020.c               |    4 +-
 drivers/media/dvb-frontends/zl10039.c              |    4 +-
 drivers/media/usb/dvb-usb-v2/lmedm04.c             |   39 +-
 drivers/media/usb/dvb-usb/cxusb.c                  |    2 +
 drivers/media/usb/dvb-usb/dib0700_devices.c        |    1 +
 drivers/media/usb/hdpvr/hdpvr-core.c               |   26 +-
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c      | 1023 ++++++++++++--------
 drivers/media/v4l2-core/v4l2-ioctl.c               |    5 +-
 drivers/mtd/nand/brcmnand/brcmnand.c               |   13 +-
 drivers/mtd/nand/nand_base.c                       |    5 +-
 drivers/mtd/nand/sunxi_nand.c                      |    8 +-
 drivers/mtd/ubi/block.c                            |   42 +-
 drivers/mtd/ubi/wl.c                               |   77 +-
 drivers/pinctrl/intel/pinctrl-intel.c              |   23 +-
 drivers/usb/gadget/function/uvc_configfs.c         |   16 +-
 drivers/watchdog/imx2_wdt.c                        |   20 +-
 fs/btrfs/inode.c                                   |   11 +-
 fs/cifs/cifsencrypt.c                              |    3 +-
 fs/cifs/connect.c                                  |    6 +-
 fs/cifs/file.c                                     |   26 +-
 fs/cifs/misc.c                                     |   14 +-
 fs/cifs/smb2pdu.c                                  |    3 +-
 fs/kernfs/file.c                                   |    2 +-
 fs/nfs/direct.c                                    |    4 +-
 fs/nfs/io.c                                        |    2 +-
 fs/nfs/nfs4idmap.c                                 |    6 +-
 fs/nfs/pnfs.c                                      |    4 +-
 fs/nfs/write.c                                     |    2 +
 fs/nsfs.c                                          |    1 +
 fs/overlayfs/readdir.c                             |    6 +-
 fs/pipe.c                                          |   15 +-
 fs/proc/kcore.c                                    |   18 +-
 fs/ubifs/xattr.c                                   |   12 +-
 include/crypto/internal/hash.h                     |    2 +
 include/crypto/poly1305.h                          |    2 -
 include/linux/mtd/map.h                            |  130 ++-
 kernel/async.c                                     |   20 +-
 kernel/relay.c                                     |    1 -
 kernel/sched/core.c                                |   13 +
 kernel/sched/rt.c                                  |   24 +-
 kernel/sched/sched.h                               |    2 +
 kernel/time/posix-timers.c                         |   34 +-
 kernel/trace/ftrace.c                              |    1 -
 lib/ubsan.c                                        |   50 +-
 lib/ubsan.h                                        |   14 +
 net/dccp/proto.c                                   |    5 +
 sound/soc/intel/skylake/skl-nhlt.c                 |    3 +-
 sound/soc/rockchip/rockchip_i2s.c                  |    6 +
 91 files changed, 1248 insertions(+), 793 deletions(-)

[PATCH 4.9 01/88] powerpc/pseries: include linux/types.h in asm/hvcall.h

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Suchanek <msuchanek@suse.de>

commit 1b689a95ce7427075f9ac9fb4aea1af530742b7f upstream.

Commit 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush
settings") uses u64 in asm/hvcall.h without including linux/types.h

This breaks hvcall.h users that do not include the header themselves.

Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/hvcall.h |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -319,6 +319,7 @@
 #define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR	(1ull << 61) // IBM bit 2
 
 #ifndef __ASSEMBLY__
+#include <linux/types.h>
 
 /**
  * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments

[PATCH 4.9 02/88] cifs: Fix missing put_xid in cifs_file_strict_mmap

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox <mawilcox@microsoft.com>

commit f04a703c3d613845ae3141bfaf223489de8ab3eb upstream.

If cifs_zap_mapping() returned an error, we would return without putting
the xid that we got earlier.  Restructure cifs_file_strict_mmap() and
cifs_file_mmap() to be more similar to each other and have a single
point of return that always puts the xid.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/file.c |   26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -3285,20 +3285,18 @@ static const struct vm_operations_struct
 
 int cifs_file_strict_mmap(struct file *file, struct vm_area_struct *vma)
 {
-	int rc, xid;
+	int xid, rc = 0;
 	struct inode *inode = file_inode(file);
 
 	xid = get_xid();
 
-	if (!CIFS_CACHE_READ(CIFS_I(inode))) {
+	if (!CIFS_CACHE_READ(CIFS_I(inode)))
 		rc = cifs_zap_mapping(inode);
-		if (rc)
-			return rc;
-	}
-
-	rc = generic_file_mmap(file, vma);
-	if (rc == 0)
+	if (!rc)
+		rc = generic_file_mmap(file, vma);
+	if (!rc)
 		vma->vm_ops = &cifs_file_vm_ops;
+
 	free_xid(xid);
 	return rc;
 }
@@ -3308,16 +3306,16 @@ int cifs_file_mmap(struct file *file, st
 	int rc, xid;
 
 	xid = get_xid();
+
 	rc = cifs_revalidate_file(file);
-	if (rc) {
+	if (rc)
 		cifs_dbg(FYI, "Validation prior to mmap failed, error=%d\n",
 			 rc);
-		free_xid(xid);
-		return rc;
-	}
-	rc = generic_file_mmap(file, vma);
-	if (rc == 0)
+	if (!rc)
+		rc = generic_file_mmap(file, vma);
+	if (!rc)
 		vma->vm_ops = &cifs_file_vm_ops;
+
 	free_xid(xid);
 	return rc;
 }

[PATCH 4.9 03/88] cifs: Fix autonegotiate security settings mismatch

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel N Pettersson <danielnp@axis.com>

commit 9aca7e454415f7878b28524e76bebe1170911a88 upstream.

Autonegotiation gives a security settings mismatch error if the SMB
server selects an SMBv3 dialect that isn't SMB3.02. The exact error is
"protocol revalidation - security settings mismatch".
This can be tested using Samba v4.2 or by setting the global Samba
setting max protocol = SMB3_00.

The check that fails in smb3_validate_negotiate is the dialect
verification of the negotiate info response. This is because it tries
to verify against the protocol_id in the global smbdefault_values. The
protocol_id in smbdefault_values is SMB3.02.
In SMB2_negotiate the protocol_id in smbdefault_values isn't updated,
it is global so it probably shouldn't be, but server->dialect is.

This patch changes the check in smb3_validate_negotiate to use
server->dialect instead of server->vals->protocol_id. The patch works
with autonegotiate and when using a specific version in the vers mount
option.

Signed-off-by: Daniel N Pettersson <danielnp@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -585,8 +585,7 @@ int smb3_validate_negotiate(const unsign
 	}
 
 	/* check validate negotiate info response matches what we got earlier */
-	if (pneg_rsp->Dialect !=
-			cpu_to_le16(tcon->ses->server->vals->protocol_id))
+	if (pneg_rsp->Dialect != cpu_to_le16(tcon->ses->server->dialect))
 		goto vneg_out;
 
 	if (pneg_rsp->SecurityMode != cpu_to_le16(tcon->ses->server->sec_mode))

[PATCH 4.9 04/88] CIFS: zero sensitive data when freeing

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aurelien Aptel <aaptel@suse.com>

commit 97f4b7276b829a8927ac903a119bef2f963ccc58 upstream.

also replaces memset()+kfree() by kzfree().

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifsencrypt.c |    3 +--
 fs/cifs/connect.c     |    6 +++---
 fs/cifs/misc.c        |   14 ++++----------
 3 files changed, 8 insertions(+), 15 deletions(-)

--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -318,9 +318,8 @@ int calc_lanman_hash(const char *passwor
 {
 	int i;
 	int rc;
-	char password_with_pad[CIFS_ENCPWD_SIZE];
+	char password_with_pad[CIFS_ENCPWD_SIZE] = {0};
 
-	memset(password_with_pad, 0, CIFS_ENCPWD_SIZE);
 	if (password)
 		strncpy(password_with_pad, password, CIFS_ENCPWD_SIZE);
 
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1667,7 +1667,7 @@ cifs_parse_mount_options(const char *mou
 			tmp_end++;
 			if (!(tmp_end < end && tmp_end[1] == delim)) {
 				/* No it is not. Set the password to NULL */
-				kfree(vol->password);
+				kzfree(vol->password);
 				vol->password = NULL;
 				break;
 			}
@@ -1705,7 +1705,7 @@ cifs_parse_mount_options(const char *mou
 					options = end;
 			}
 
-			kfree(vol->password);
+			kzfree(vol->password);
 			/* Now build new password string */
 			temp_len = strlen(value);
 			vol->password = kzalloc(temp_len+1, GFP_KERNEL);
@@ -4159,7 +4159,7 @@ cifs_construct_tcon(struct cifs_sb_info
 		reset_cifs_unix_caps(0, tcon, NULL, vol_info);
 out:
 	kfree(vol_info->username);
-	kfree(vol_info->password);
+	kzfree(vol_info->password);
 	kfree(vol_info);
 
 	return tcon;
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -99,14 +99,11 @@ sesInfoFree(struct cifs_ses *buf_to_free
 	kfree(buf_to_free->serverOS);
 	kfree(buf_to_free->serverDomain);
 	kfree(buf_to_free->serverNOS);
-	if (buf_to_free->password) {
-		memset(buf_to_free->password, 0, strlen(buf_to_free->password));
-		kfree(buf_to_free->password);
-	}
+	kzfree(buf_to_free->password);
 	kfree(buf_to_free->user_name);
 	kfree(buf_to_free->domainName);
-	kfree(buf_to_free->auth_key.response);
-	kfree(buf_to_free);
+	kzfree(buf_to_free->auth_key.response);
+	kzfree(buf_to_free);
 }
 
 struct cifs_tcon *
@@ -137,10 +134,7 @@ tconInfoFree(struct cifs_tcon *buf_to_fr
 	}
 	atomic_dec(&tconInfoAllocCount);
 	kfree(buf_to_free->nativeFileSystem);
-	if (buf_to_free->password) {
-		memset(buf_to_free->password, 0, strlen(buf_to_free->password));
-		kfree(buf_to_free->password);
-	}
+	kzfree(buf_to_free->password);
 	kfree(buf_to_free);
 }
 

[PATCH 4.9 05/88] dmaengine: dmatest: fix container_of member in dmatest_callback

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yang Shunyong <shunyong.yang@hxt-semitech.com>

commit 66b3bd2356e0a1531c71a3dcf96944621e25c17c upstream.

The type of arg passed to dmatest_callback is struct dmatest_done.
It refers to test_done in struct dmatest_thread, not done_wait.

Fixes: 6f6a23a213be ("dmaengine: dmatest: move callback wait ...")
Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Acked-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/dmatest.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -339,7 +339,7 @@ static void dmatest_callback(void *arg)
 {
 	struct dmatest_done *done = arg;
 	struct dmatest_thread *thread =
-		container_of(arg, struct dmatest_thread, done_wait);
+		container_of(done, struct dmatest_thread, test_done);
 	if (!thread->done) {
 		done->done = true;
 		wake_up_all(done->wait);

[PATCH 4.9 06/88] kaiser: fix compile error without vsyscall

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@google.com>

Tobias noticed a compile error on 4.4.115, and it's the same on 4.9.80:
arch/x86/mm/kaiser.c: In function ‘kaiser_init’:
arch/x86/mm/kaiser.c:348:8: error: ‘vsyscall_pgprot’ undeclared
                                   (first use in this function)

It seems like his combination of kernel options doesn't work for KAISER.
X86_VSYSCALL_EMULATION is not set on his system, while LEGACY_VSYSCALL
is set to NONE (LEGACY_VSYSCALL_NONE=y). He managed to get things
compiling again, by moving the 'extern unsigned long vsyscall_pgprot'
outside of the preprocessor statement. This works because the optimizer
removes that code (vsyscall_enabled() is always false) - and that's how
it was done in some older backports.

Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/vsyscall.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/include/asm/vsyscall.h
+++ b/arch/x86/include/asm/vsyscall.h
@@ -13,7 +13,6 @@ extern void map_vsyscall(void);
  */
 extern bool emulate_vsyscall(struct pt_regs *regs, unsigned long address);
 extern bool vsyscall_enabled(void);
-extern unsigned long vsyscall_pgprot;
 #else
 static inline void map_vsyscall(void) {}
 static inline bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
@@ -22,5 +21,6 @@ static inline bool emulate_vsyscall(stru
 }
 static inline bool vsyscall_enabled(void) { return false; }
 #endif
+extern unsigned long vsyscall_pgprot;
 
 #endif /* _ASM_X86_VSYSCALL_H */

[PATCH 4.9 07/88] posix-timer: Properly check sigevent->sigev_notify

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit cef31d9af908243421258f1df35a4a644604efbe upstream.

timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).

The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.

This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.

Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.

Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/posix-timers.c |   34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)

--- a/kernel/time/posix-timers.c
+++ b/kernel/time/posix-timers.c
@@ -507,17 +507,22 @@ static struct pid *good_sigevent(sigeven
 {
 	struct task_struct *rtn = current->group_leader;
 
-	if ((event->sigev_notify & SIGEV_THREAD_ID ) &&
-		(!(rtn = find_task_by_vpid(event->sigev_notify_thread_id)) ||
-		 !same_thread_group(rtn, current) ||
-		 (event->sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_SIGNAL))
+	switch (event->sigev_notify) {
+	case SIGEV_SIGNAL | SIGEV_THREAD_ID:
+		rtn = find_task_by_vpid(event->sigev_notify_thread_id);
+		if (!rtn || !same_thread_group(rtn, current))
+			return NULL;
+		/* FALLTHRU */
+	case SIGEV_SIGNAL:
+	case SIGEV_THREAD:
+		if (event->sigev_signo <= 0 || event->sigev_signo > SIGRTMAX)
+			return NULL;
+		/* FALLTHRU */
+	case SIGEV_NONE:
+		return task_pid(rtn);
+	default:
 		return NULL;
-
-	if (((event->sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE) &&
-	    ((event->sigev_signo <= 0) || (event->sigev_signo > SIGRTMAX)))
-		return NULL;
-
-	return task_pid(rtn);
+	}
 }
 
 void posix_timers_register_clock(const clockid_t clock_id,
@@ -745,8 +750,7 @@ common_timer_get(struct k_itimer *timr,
 	/* interval timer ? */
 	if (iv.tv64)
 		cur_setting->it_interval = ktime_to_timespec(iv);
-	else if (!hrtimer_active(timer) &&
-		 (timr->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE)
+	else if (!hrtimer_active(timer) && timr->it_sigev_notify != SIGEV_NONE)
 		return;
 
 	now = timer->base->get_time();
@@ -757,7 +761,7 @@ common_timer_get(struct k_itimer *timr,
 	 * expiry is > now.
 	 */
 	if (iv.tv64 && (timr->it_requeue_pending & REQUEUE_PENDING ||
-	    (timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE))
+			timr->it_sigev_notify == SIGEV_NONE))
 		timr->it_overrun += (unsigned int) hrtimer_forward(timer, now, iv);
 
 	remaining = __hrtimer_expires_remaining_adjusted(timer, now);
@@ -767,7 +771,7 @@ common_timer_get(struct k_itimer *timr,
 		 * A single shot SIGEV_NONE timer must return 0, when
 		 * it is expired !
 		 */
-		if ((timr->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE)
+		if (timr->it_sigev_notify != SIGEV_NONE)
 			cur_setting->it_value.tv_nsec = 1;
 	} else
 		cur_setting->it_value = ktime_to_timespec(remaining);
@@ -865,7 +869,7 @@ common_timer_set(struct k_itimer *timr,
 	timr->it.real.interval = timespec_to_ktime(new_setting->it_interval);
 
 	/* SIGEV_NONE timers are not queued ! See common_timer_get */
-	if (((timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE)) {
+	if (timr->it_sigev_notify == SIGEV_NONE) {
 		/* Setup correct expiry time for relative timers */
 		if (mode == HRTIMER_MODE_REL) {
 			hrtimer_add_expires(timer, timer->base->get_time());

[PATCH 4.9 08/88] usb: gadget: uvc: Missing files for configfs interface

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Petr Cvek <petr.cvek@tul.cz>

commit c8cd751060b149997b9de53a494fb1490ded72c5 upstream.

Commit 76e0da34c7ce ("usb-gadget/uvc: use per-attribute show and store
methods") caused a stringification of an undefined macro argument "aname",
so three UVC parameters (streaming_interval, streaming_maxpacket and
streaming_maxburst) were named "aname".

Add the definition of "aname" to the main macro and name the filenames as
originaly intended.

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/uvc_configfs.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -2140,7 +2140,7 @@ static struct configfs_item_operations u
 	.release		= uvc_attr_release,
 };
 
-#define UVCG_OPTS_ATTR(cname, conv, str2u, uxx, vnoc, limit)		\
+#define UVCG_OPTS_ATTR(cname, aname, conv, str2u, uxx, vnoc, limit)	\
 static ssize_t f_uvc_opts_##cname##_show(				\
 	struct config_item *item, char *page)				\
 {									\
@@ -2183,16 +2183,16 @@ end:									\
 	return ret;							\
 }									\
 									\
-UVC_ATTR(f_uvc_opts_, cname, aname)
+UVC_ATTR(f_uvc_opts_, cname, cname)
 
 #define identity_conv(x) (x)
 
-UVCG_OPTS_ATTR(streaming_interval, identity_conv, kstrtou8, u8, identity_conv,
-	       16);
-UVCG_OPTS_ATTR(streaming_maxpacket, le16_to_cpu, kstrtou16, u16, le16_to_cpu,
-	       3072);
-UVCG_OPTS_ATTR(streaming_maxburst, identity_conv, kstrtou8, u8, identity_conv,
-	       15);
+UVCG_OPTS_ATTR(streaming_interval, streaming_interval, identity_conv,
+	       kstrtou8, u8, identity_conv, 16);
+UVCG_OPTS_ATTR(streaming_maxpacket, streaming_maxpacket, le16_to_cpu,
+	       kstrtou16, u16, le16_to_cpu, 3072);
+UVCG_OPTS_ATTR(streaming_maxburst, streaming_maxburst, identity_conv,
+	       kstrtou8, u8, identity_conv, 15);
 
 #undef identity_conv
 

[PATCH 4.9 09/88] sched/rt: Use container_of() to get root domain in rto_push_irq_work_func()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit ad0f1d9d65938aec72a698116cd73a980916895e upstream.

When the rto_push_irq_work_func() is called, it looks at the RT overloaded
bitmask in the root domain via the runqueue (rq->rd). The problem is that
during CPU up and down, nothing here stops rq->rd from changing between
taking the rq->rd->rto_lock and releasing it. That means the lock that is
released is not the same lock that was taken.

Instead of using this_rq()->rd to get the root domain, as the irq work is
part of the root domain, we can simply get the root domain from the irq work
that is passed to the routine:

 container_of(work, struct root_domain, rto_push_work)

This keeps the root domain consistent.

Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4bdced5c9a292 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/sched/rt.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -1895,9 +1895,8 @@ static void push_rt_tasks(struct rq *rq)
  * the rt_loop_next will cause the iterator to perform another scan.
  *
  */
-static int rto_next_cpu(struct rq *rq)
+static int rto_next_cpu(struct root_domain *rd)
 {
-	struct root_domain *rd = rq->rd;
 	int next;
 	int cpu;
 
@@ -1973,7 +1972,7 @@ static void tell_cpu_to_push(struct rq *
 	 * Otherwise it is finishing up and an ipi needs to be sent.
 	 */
 	if (rq->rd->rto_cpu < 0)
-		cpu = rto_next_cpu(rq);
+		cpu = rto_next_cpu(rq->rd);
 
 	raw_spin_unlock(&rq->rd->rto_lock);
 
@@ -1986,6 +1985,8 @@ static void tell_cpu_to_push(struct rq *
 /* Called from hardirq context */
 void rto_push_irq_work_func(struct irq_work *work)
 {
+	struct root_domain *rd =
+		container_of(work, struct root_domain, rto_push_work);
 	struct rq *rq;
 	int cpu;
 
@@ -2001,18 +2002,18 @@ void rto_push_irq_work_func(struct irq_w
 		raw_spin_unlock(&rq->lock);
 	}
 
-	raw_spin_lock(&rq->rd->rto_lock);
+	raw_spin_lock(&rd->rto_lock);
 
 	/* Pass the IPI to the next rt overloaded queue */
-	cpu = rto_next_cpu(rq);
+	cpu = rto_next_cpu(rd);
 
-	raw_spin_unlock(&rq->rd->rto_lock);
+	raw_spin_unlock(&rd->rto_lock);
 
 	if (cpu < 0)
 		return;
 
 	/* Try the next RT overloaded CPU */
-	irq_work_queue_on(&rq->rd->rto_push_work, cpu);
+	irq_work_queue_on(&rd->rto_push_work, cpu);
 }
 #endif /* HAVE_RT_PUSH_IPI */
 

[PATCH 4.9 10/88] sched/rt: Up the root domain ref count when passing it around via IPIs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 364f56653708ba8bcdefd4f0da2a42904baa8eeb upstream.

When issuing an IPI RT push, where an IPI is sent to each CPU that has more
than one RT task scheduled on it, it references the root domain's rto_mask,
that contains all the CPUs within the root domain that has more than one RT
task in the runable state. The problem is, after the IPIs are initiated, the
rq->lock is released. This means that the root domain that is associated to
the run queue could be freed while the IPIs are going around.

Add a sched_get_rd() and a sched_put_rd() that will increment and decrement
the root domain's ref count respectively. This way when initiating the IPIs,
the scheduler will up the root domain's ref count before releasing the
rq->lock, ensuring that the root domain does not go away until the IPI round
is complete.

Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4bdced5c9a292 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/sched/core.c  |   13 +++++++++++++
 kernel/sched/rt.c    |    9 +++++++--
 kernel/sched/sched.h |    2 ++
 3 files changed, 22 insertions(+), 2 deletions(-)

--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5864,6 +5864,19 @@ static void rq_attach_root(struct rq *rq
 		call_rcu_sched(&old_rd->rcu, free_rootdomain);
 }
 
+void sched_get_rd(struct root_domain *rd)
+{
+	atomic_inc(&rd->refcount);
+}
+
+void sched_put_rd(struct root_domain *rd)
+{
+	if (!atomic_dec_and_test(&rd->refcount))
+		return;
+
+	call_rcu_sched(&rd->rcu, free_rootdomain);
+}
+
 static int init_rootdomain(struct root_domain *rd)
 {
 	memset(rd, 0, sizeof(*rd));
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -1978,8 +1978,11 @@ static void tell_cpu_to_push(struct rq *
 
 	rto_start_unlock(&rq->rd->rto_loop_start);
 
-	if (cpu >= 0)
+	if (cpu >= 0) {
+		/* Make sure the rd does not get freed while pushing */
+		sched_get_rd(rq->rd);
 		irq_work_queue_on(&rq->rd->rto_push_work, cpu);
+	}
 }
 
 /* Called from hardirq context */
@@ -2009,8 +2012,10 @@ void rto_push_irq_work_func(struct irq_w
 
 	raw_spin_unlock(&rd->rto_lock);
 
-	if (cpu < 0)
+	if (cpu < 0) {
+		sched_put_rd(rd);
 		return;
+	}
 
 	/* Try the next RT overloaded CPU */
 	irq_work_queue_on(&rd->rto_push_work, cpu);
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -590,6 +590,8 @@ struct root_domain {
 };
 
 extern struct root_domain def_root_domain;
+extern void sched_get_rd(struct root_domain *rd);
+extern void sched_put_rd(struct root_domain *rd);
 
 #ifdef HAVE_RT_PUSH_IPI
 extern void rto_push_irq_work_func(struct irq_work *work);

[PATCH 4.9 11/88] dccp: CVE-2017-8824: use-after-free in DCCP code

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohamed Ghannam <simo.ghannam@gmail.com>

commit 69c64866ce072dea1d1e59a0d61e0f66c0dffb76 upstream.

Whenever the sock object is in DCCP_CLOSED state,
dccp_disconnect() must free dccps_hc_tx_ccid and
dccps_hc_rx_ccid and set to NULL.

Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/dccp/proto.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -259,6 +259,7 @@ int dccp_disconnect(struct sock *sk, int
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
 	struct inet_sock *inet = inet_sk(sk);
+	struct dccp_sock *dp = dccp_sk(sk);
 	int err = 0;
 	const int old_state = sk->sk_state;
 
@@ -278,6 +279,10 @@ int dccp_disconnect(struct sock *sk, int
 		sk->sk_err = ECONNRESET;
 
 	dccp_clear_xmit_timers(sk);
+	ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk);
+	ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk);
+	dp->dccps_hc_rx_ccid = NULL;
+	dp->dccps_hc_tx_ccid = NULL;
 
 	__skb_queue_purge(&sk->sk_receive_queue);
 	__skb_queue_purge(&sk->sk_write_queue);

[PATCH 4.9 12/88] media: dvb-usb-v2: lmedm04: Improve logic checking of warm start

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 3d932ee27e852e4904647f15b64dedca51187ad7 upstream.

Warm start has no check as whether a genuine device has
connected and proceeds to next execution path.

Check device should read 0x47 at offset of 2 on USB descriptor read
and it is the amount requested of 6 bytes.

Fix for
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access as

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb-v2/lmedm04.c |   26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -504,18 +504,23 @@ static int lme2510_pid_filter(struct dvb
 
 static int lme2510_return_status(struct dvb_usb_device *d)
 {
-	int ret = 0;
+	int ret;
 	u8 *data;
 
-	data = kzalloc(10, GFP_KERNEL);
+	data = kzalloc(6, GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
-			0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
-	info("Firmware Status: %x (%x)", ret , data[2]);
+	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+			      0x06, 0x80, 0x0302, 0x00,
+			      data, 0x6, 200);
+	if (ret != 6)
+		ret = -EINVAL;
+	else
+		ret = data[2];
+
+	info("Firmware Status: %6ph", data);
 
-	ret = (ret < 0) ? -ENODEV : data[2];
 	kfree(data);
 	return ret;
 }
@@ -1200,6 +1205,7 @@ static int lme2510_get_adapter_count(str
 static int lme2510_identify_state(struct dvb_usb_device *d, const char **name)
 {
 	struct lme2510_state *st = d->priv;
+	int status;
 
 	usb_reset_configuration(d->udev);
 
@@ -1208,12 +1214,16 @@ static int lme2510_identify_state(struct
 
 	st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware;
 
-	if (lme2510_return_status(d) == 0x44) {
+	status = lme2510_return_status(d);
+	if (status == 0x44) {
 		*name = lme_firmware_switch(d, 0);
 		return COLD;
 	}
 
-	return 0;
+	if (status != 0x47)
+		return -EINVAL;
+
+	return WARM;
 }
 
 static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,

[PATCH 4.9 13/88] media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tuner

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 7bf7a7116ed313c601307f7e585419369926ab05 upstream.

When the tuner was split from m88rs2000 the attach function is in wrong
place.

Move to dm04_lme2510_tuner to trap errors on failure and removing
a call to lme_coldreset.

Prevents driver starting up without any tuner connected.

Fixes to trap for ts2020 fail.
LME2510(C): FE Found M88RS2000
ts2020: probe of 0-0060 failed with error -11
...
LME2510(C): TUN Found RS2000 tuner
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb-v2/lmedm04.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -1084,8 +1084,6 @@ static int dm04_lme2510_frontend_attach(
 
 		if (adap->fe[0]) {
 			info("FE Found M88RS2000");
-			dvb_attach(ts2020_attach, adap->fe[0], &ts2020_config,
-					&d->i2c_adap);
 			st->i2c_tuner_gate_w = 5;
 			st->i2c_tuner_gate_r = 5;
 			st->i2c_tuner_addr = 0x60;
@@ -1151,17 +1149,18 @@ static int dm04_lme2510_tuner(struct dvb
 			ret = st->tuner_config;
 		break;
 	case TUNER_RS2000:
-		ret = st->tuner_config;
+		if (dvb_attach(ts2020_attach, adap->fe[0],
+			       &ts2020_config, &d->i2c_adap))
+			ret = st->tuner_config;
 		break;
 	default:
 		break;
 	}
 
-	if (ret)
+	if (ret) {
 		info("TUN Found %s tuner", tun_msg[ret]);
-	else {
-		info("TUN No tuner found --- resetting device");
-		lme_coldreset(d);
+	} else {
+		info("TUN No tuner found");
 		return -ENODEV;
 	}
 

[PATCH 4.9 14/88] media: hdpvr: Fix an error handling path in hdpvr_probe()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arvind Yadav <arvind.yadav.cs@gmail.com>

commit c0f71bbb810237a38734607ca4599632f7f5d47f upstream.

Here, hdpvr_register_videodev() is responsible for setup and
register a video device. Also defining and initializing a worker.
hdpvr_register_videodev() is calling by hdpvr_probe at last.
So no need to flush any work here.
Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/hdpvr/hdpvr-core.c |   26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

--- a/drivers/media/usb/hdpvr/hdpvr-core.c
+++ b/drivers/media/usb/hdpvr/hdpvr-core.c
@@ -295,7 +295,7 @@ static int hdpvr_probe(struct usb_interf
 	/* register v4l2_device early so it can be used for printks */
 	if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) {
 		dev_err(&interface->dev, "v4l2_device_register failed\n");
-		goto error;
+		goto error_free_dev;
 	}
 
 	mutex_init(&dev->io_mutex);
@@ -304,7 +304,7 @@ static int hdpvr_probe(struct usb_interf
 	dev->usbc_buf = kmalloc(64, GFP_KERNEL);
 	if (!dev->usbc_buf) {
 		v4l2_err(&dev->v4l2_dev, "Out of memory\n");
-		goto error;
+		goto error_v4l2_unregister;
 	}
 
 	init_waitqueue_head(&dev->wait_buffer);
@@ -342,13 +342,13 @@ static int hdpvr_probe(struct usb_interf
 	}
 	if (!dev->bulk_in_endpointAddr) {
 		v4l2_err(&dev->v4l2_dev, "Could not find bulk-in endpoint\n");
-		goto error;
+		goto error_put_usb;
 	}
 
 	/* init the device */
 	if (hdpvr_device_init(dev)) {
 		v4l2_err(&dev->v4l2_dev, "device init failed\n");
-		goto error;
+		goto error_put_usb;
 	}
 
 	mutex_lock(&dev->io_mutex);
@@ -356,7 +356,7 @@ static int hdpvr_probe(struct usb_interf
 		mutex_unlock(&dev->io_mutex);
 		v4l2_err(&dev->v4l2_dev,
 			 "allocating transfer buffers failed\n");
-		goto error;
+		goto error_put_usb;
 	}
 	mutex_unlock(&dev->io_mutex);
 
@@ -364,7 +364,7 @@ static int hdpvr_probe(struct usb_interf
 	retval = hdpvr_register_i2c_adapter(dev);
 	if (retval < 0) {
 		v4l2_err(&dev->v4l2_dev, "i2c adapter register failed\n");
-		goto error;
+		goto error_free_buffers;
 	}
 
 	client = hdpvr_register_ir_rx_i2c(dev);
@@ -397,13 +397,17 @@ static int hdpvr_probe(struct usb_interf
 reg_fail:
 #if IS_ENABLED(CONFIG_I2C)
 	i2c_del_adapter(&dev->i2c_adapter);
+error_free_buffers:
 #endif
+	hdpvr_free_buffers(dev);
+error_put_usb:
+	usb_put_dev(dev->udev);
+	kfree(dev->usbc_buf);
+error_v4l2_unregister:
+	v4l2_device_unregister(&dev->v4l2_dev);
+error_free_dev:
+	kfree(dev);
 error:
-	if (dev) {
-		flush_work(&dev->worker);
-		/* this frees allocated memory */
-		hdpvr_delete(dev);
-	}
 	return retval;
 }
 

[PATCH 4.9 15/88] mtd: cfi: convert inline functions to macros

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 9e343e87d2c4c707ef8fae2844864d4dde3a2d13 upstream.

The map_word_() functions, dating back to linux-2.6.8, try to perform
bitwise operations on a 'map_word' structure. This may have worked
with compilers that were current then (gcc-3.4 or earlier), but end
up being rather inefficient on any version I could try now (gcc-4.4 or
higher). Specifically we hit a problem analyzed in gcc PR81715 where we
fail to reuse the stack space for local variables.

This can be seen immediately in the stack consumption for
cfi_staa_erase_varsize() and other functions that (with CONFIG_KASAN)
can be up to 2200 bytes. Changing the inline functions into macros brings
this down to 1280 bytes.  Without KASAN, the same problem exists, but
the stack consumption is lower to start with, my patch shrinks it from
920 to 496 bytes on with arm-linux-gnueabi-gcc-5.4, and saves around
1KB in .text size for cfi_cmdset_0020.c, as it avoids copying map_word
structures for each call to one of these helpers.

With the latest gcc-8 snapshot, the problem is fixed in upstream gcc,
but nobody uses that yet, so we should still work around it in mainline
kernels and probably backport the workaround to stable kernels as well.
We had a couple of other functions that suffered from the same gcc bug,
and all of those had a simpler workaround involving dummy variables
in the inline function. Unfortunately that did not work here, the
macro hack was the best I could come up with.

It would also be helpful to have someone to a little performance testing
on the patch, to see how much it helps in terms of CPU utilitzation.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mtd/map.h |  130 ++++++++++++++++++++++--------------------------
 1 file changed, 61 insertions(+), 69 deletions(-)

--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -270,75 +270,67 @@ void map_destroy(struct mtd_info *mtd);
 #define INVALIDATE_CACHED_RANGE(map, from, size) \
 	do { if (map->inval_cache) map->inval_cache(map, from, size); } while (0)
 
-
-static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2)
-{
-	int i;
-
-	for (i = 0; i < map_words(map); i++) {
-		if (val1.x[i] != val2.x[i])
-			return 0;
-	}
-
-	return 1;
-}
-
-static inline map_word map_word_and(struct map_info *map, map_word val1, map_word val2)
-{
-	map_word r;
-	int i;
-
-	for (i = 0; i < map_words(map); i++)
-		r.x[i] = val1.x[i] & val2.x[i];
-
-	return r;
-}
-
-static inline map_word map_word_clr(struct map_info *map, map_word val1, map_word val2)
-{
-	map_word r;
-	int i;
-
-	for (i = 0; i < map_words(map); i++)
-		r.x[i] = val1.x[i] & ~val2.x[i];
-
-	return r;
-}
-
-static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2)
-{
-	map_word r;
-	int i;
-
-	for (i = 0; i < map_words(map); i++)
-		r.x[i] = val1.x[i] | val2.x[i];
-
-	return r;
-}
-
-static inline int map_word_andequal(struct map_info *map, map_word val1, map_word val2, map_word val3)
-{
-	int i;
-
-	for (i = 0; i < map_words(map); i++) {
-		if ((val1.x[i] & val2.x[i]) != val3.x[i])
-			return 0;
-	}
-
-	return 1;
-}
-
-static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2)
-{
-	int i;
-
-	for (i = 0; i < map_words(map); i++) {
-		if (val1.x[i] & val2.x[i])
-			return 1;
-	}
-
-	return 0;
-}
+#define map_word_equal(map, val1, val2)					\
+({									\
+	int i, ret = 1;							\
+	for (i = 0; i < map_words(map); i++)				\
+		if ((val1).x[i] != (val2).x[i]) {			\
+			ret = 0;					\
+			break;						\
+		}							\
+	ret;								\
+})
+
+#define map_word_and(map, val1, val2)					\
+({									\
+	map_word r;							\
+	int i;								\
+	for (i = 0; i < map_words(map); i++)				\
+		r.x[i] = (val1).x[i] & (val2).x[i];			\
+	r;								\
+})
+
+#define map_word_clr(map, val1, val2)					\
+({									\
+	map_word r;							\
+	int i;								\
+	for (i = 0; i < map_words(map); i++)				\
+		r.x[i] = (val1).x[i] & ~(val2).x[i];			\
+	r;								\
+})
+
+#define map_word_or(map, val1, val2)					\
+({									\
+	map_word r;							\
+	int i;								\
+	for (i = 0; i < map_words(map); i++)				\
+		r.x[i] = (val1).x[i] | (val2).x[i];			\
+	r;								\
+})
+
+#define map_word_andequal(map, val1, val2, val3)			\
+({									\
+	int i, ret = 1;							\
+	for (i = 0; i < map_words(map); i++) {				\
+		if (((val1).x[i] & (val2).x[i]) != (val2).x[i]) {	\
+			ret = 0;					\
+			break;						\
+		}							\
+	}								\
+	ret;								\
+})
+
+#define map_word_bitsset(map, val1, val2)				\
+({									\
+	int i, ret = 0;							\
+	for (i = 0; i < map_words(map); i++) {				\
+		if ((val1).x[i] & (val2).x[i]) {			\
+			ret = 1;					\
+			break;						\
+		}							\
+	}								\
+	ret;								\
+})
 
 static inline map_word map_word_load(struct map_info *map, const void *ptr)
 {

[PATCH 4.9 16/88] mtd: nand: brcmnand: Disable prefetch by default

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kamal Dasu <kdasu.kdev@gmail.com>

commit f953f0f89663c39f08f4baaa8a4a881401b65654 upstream.

Brcm nand controller prefetch feature needs to be disabled
by default. Enabling affects performance on random reads as
well as dma reads.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/brcmnand/brcmnand.c |   13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -2193,16 +2193,9 @@ static int brcmnand_setup_dev(struct brc
 	if (ctrl->nand_version >= 0x0702)
 		tmp |= ACC_CONTROL_RD_ERASED;
 	tmp &= ~ACC_CONTROL_FAST_PGM_RDIN;
-	if (ctrl->features & BRCMNAND_HAS_PREFETCH) {
-		/*
-		 * FIXME: Flash DMA + prefetch may see spurious erased-page ECC
-		 * errors
-		 */
-		if (has_flash_dma(ctrl))
-			tmp &= ~ACC_CONTROL_PREFETCH;
-		else
-			tmp |= ACC_CONTROL_PREFETCH;
-	}
+	if (ctrl->features & BRCMNAND_HAS_PREFETCH)
+		tmp &= ~ACC_CONTROL_PREFETCH;
+
 	nand_writereg(ctrl, offs, tmp);
 
 	return 0;

[PATCH 4.9 17/88] mtd: nand: Fix nand_do_read_oob() return value

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miquel Raynal <miquel.raynal@free-electrons.com>

commit 87e89ce8d0d14f573c068c61bec2117751fb5103 upstream.

Starting from commit 041e4575f034 ("mtd: nand: handle ECC errors in
OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a
negative error, and the MTD layer expected it.

However, the trend for the NAND layer is now to return an error or a
positive number of bitflips. Deciding which status to return to the user
belongs to the MTD layer.

Commit e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
brought this logic to the mtd_read_oob() function while the return value
coming from nand_do_read_oob() (called by the ->_read_oob() hook) was
left unchanged.

Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/nand_base.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2320,6 +2320,7 @@ EXPORT_SYMBOL(nand_write_oob_syndrome);
 static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
+	unsigned int max_bitflips = 0;
 	int page, realpage, chipnr;
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct mtd_ecc_stats stats;
@@ -2377,6 +2378,8 @@ static int nand_do_read_oob(struct mtd_i
 				nand_wait_ready(mtd);
 		}
 
+		max_bitflips = max_t(unsigned int, max_bitflips, ret);
+
 		readlen -= len;
 		if (!readlen)
 			break;
@@ -2402,7 +2405,7 @@ static int nand_do_read_oob(struct mtd_i
 	if (mtd->ecc_stats.failed - stats.failed)
 		return -EBADMSG;
 
-	return  mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+	return max_bitflips;
 }
 
 /**

[PATCH 4.9 18/88] mtd: nand: sunxi: Fix ECC strength choice

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miquel Raynal <miquel.raynal@free-electrons.com>

commit f4c6cd1a7f2275d5bc0e494b21fff26f8dde80f0 upstream.

When the requested ECC strength does not exactly match the strengths
supported by the ECC engine, the driver is selecting the closest
strength meeting the 'selected_strength > requested_strength'
constraint. Fix the fact that, in this particular case, ecc->strength
value was not updated to match the 'selected_strength'.

For instance, one can encounter this issue when no ECC requirement is
filled in the device tree while the NAND chip minimum requirement is not
a strength/step_size combo natively supported by the ECC engine.

Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support")
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/sunxi_nand.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1835,8 +1835,14 @@ static int sunxi_nand_hw_common_ecc_ctrl
 
 	/* Add ECC info retrieval from DT */
 	for (i = 0; i < ARRAY_SIZE(strengths); i++) {
-		if (ecc->strength <= strengths[i])
+		if (ecc->strength <= strengths[i]) {
+			/*
+			 * Update ecc->strength value with the actual strength
+			 * that will be used by the ECC engine.
+			 */
+			ecc->strength = strengths[i];
 			break;
+		}
 	}
 
 	if (i >= ARRAY_SIZE(strengths)) {

[PATCH 4.9 19/88] ubi: fastmap: Erase outdated anchor PEBs during attach

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sascha Hauer <s.hauer@pengutronix.de>

commit f78e5623f45bab2b726eec29dc5cefbbab2d0b1c upstream.

The fastmap update code might erase the current fastmap anchor PEB
in case it doesn't find any new free PEB. When a power cut happens
in this situation we must not have any outdated fastmap anchor PEB
on the device, because that would be used to attach during next
boot.
The easiest way to make that sure is to erase all outdated fastmap
anchor PEBs synchronously during attach.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Fixes: dbb7d2a88d2a ("UBI: Add fastmap core")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/ubi/wl.c |   77 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 57 insertions(+), 20 deletions(-)

--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1529,6 +1529,46 @@ static void shutdown_work(struct ubi_dev
 }
 
 /**
+ * erase_aeb - erase a PEB given in UBI attach info PEB
+ * @ubi: UBI device description object
+ * @aeb: UBI attach info PEB
+ * @sync: If true, erase synchronously. Otherwise schedule for erasure
+ */
+static int erase_aeb(struct ubi_device *ubi, struct ubi_ainf_peb *aeb, bool sync)
+{
+	struct ubi_wl_entry *e;
+	int err;
+
+	e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+	if (!e)
+		return -ENOMEM;
+
+	e->pnum = aeb->pnum;
+	e->ec = aeb->ec;
+	ubi->lookuptbl[e->pnum] = e;
+
+	if (sync) {
+		err = sync_erase(ubi, e, false);
+		if (err)
+			goto out_free;
+
+		wl_tree_add(e, &ubi->free);
+		ubi->free_count++;
+	} else {
+		err = schedule_erase(ubi, e, aeb->vol_id, aeb->lnum, 0, false);
+		if (err)
+			goto out_free;
+	}
+
+	return 0;
+
+out_free:
+	wl_entry_destroy(ubi, e);
+
+	return err;
+}
+
+/**
  * ubi_wl_init - initialize the WL sub-system using attaching information.
  * @ubi: UBI device description object
  * @ai: attaching information
@@ -1566,17 +1606,9 @@ int ubi_wl_init(struct ubi_device *ubi,
 	list_for_each_entry_safe(aeb, tmp, &ai->erase, u.list) {
 		cond_resched();
 
-		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
-		if (!e)
-			goto out_free;
-
-		e->pnum = aeb->pnum;
-		e->ec = aeb->ec;
-		ubi->lookuptbl[e->pnum] = e;
-		if (schedule_erase(ubi, e, aeb->vol_id, aeb->lnum, 0, false)) {
-			wl_entry_destroy(ubi, e);
+		err = erase_aeb(ubi, aeb, false);
+		if (err)
 			goto out_free;
-		}
 
 		found_pebs++;
 	}
@@ -1635,6 +1667,8 @@ int ubi_wl_init(struct ubi_device *ubi,
 			ubi_assert(!ubi->lookuptbl[e->pnum]);
 			ubi->lookuptbl[e->pnum] = e;
 		} else {
+			bool sync = false;
+
 			/*
 			 * Usually old Fastmap PEBs are scheduled for erasure
 			 * and we don't have to care about them but if we face
@@ -1644,18 +1678,21 @@ int ubi_wl_init(struct ubi_device *ubi,
 			if (ubi->lookuptbl[aeb->pnum])
 				continue;
 
-			e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
-			if (!e)
-				goto out_free;
+			/*
+			 * The fastmap update code might not find a free PEB for
+			 * writing the fastmap anchor to and then reuses the
+			 * current fastmap anchor PEB. When this PEB gets erased
+			 * and a power cut happens before it is written again we
+			 * must make sure that the fastmap attach code doesn't
+			 * find any outdated fastmap anchors, hence we erase the
+			 * outdated fastmap anchor PEBs synchronously here.
+			 */
+			if (aeb->vol_id == UBI_FM_SB_VOLUME_ID)
+				sync = true;
 
-			e->pnum = aeb->pnum;
-			e->ec = aeb->ec;
-			ubi_assert(!ubi->lookuptbl[e->pnum]);
-			ubi->lookuptbl[e->pnum] = e;
-			if (schedule_erase(ubi, e, aeb->vol_id, aeb->lnum, 0, false)) {
-				wl_entry_destroy(ubi, e);
+			err = erase_aeb(ubi, aeb, sync);
+			if (err)
 				goto out_free;
-			}
 		}
 
 		found_pebs++;

[PATCH 4.9 20/88] ubi: block: Fix locking for idr_alloc/idr_remove

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bradley Bolen <bradleybolen@gmail.com>

commit 7f29ae9f977bcdc3654e68bc36d170223c52fd48 upstream.

This fixes a race with idr_alloc where gd->first_minor can be set to the
same value for two simultaneous calls to ubiblock_create.  Each instance
calls device_add_disk with the same first_minor.  device_add_disk calls
bdi_register_owner which generates several warnings.

WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31
sysfs_warn_dup+0x68/0x88
sysfs: cannot create duplicate filename '/devices/virtual/bdi/252:2'

WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240
kobject_add_internal+0x1ec/0x2f8
kobject_add_internal failed for 252:2 with -EEXIST, don't try to
register things with the same name in the same directory

WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31
sysfs_warn_dup+0x68/0x88
sysfs: cannot create duplicate filename '/dev/block/252:2'

However, device_add_disk does not error out when bdi_register_owner
returns an error.  Control continues until reaching blk_register_queue.
It then BUGs.

kernel BUG at kernel-source/fs/sysfs/group.c:113!
[<c01e26cc>] (internal_create_group) from [<c01e2950>]
(sysfs_create_group+0x20/0x24)
[<c01e2950>] (sysfs_create_group) from [<c00e3d38>]
(blk_trace_init_sysfs+0x18/0x20)
[<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>]
(blk_register_queue+0xd8/0x154)
[<c02bdfbc>] (blk_register_queue) from [<c02cec84>]
(device_add_disk+0x194/0x44c)
[<c02cec84>] (device_add_disk) from [<c0436ec8>]
(ubiblock_create+0x284/0x2e0)
[<c0436ec8>] (ubiblock_create) from [<c0427bb8>]
(vol_cdev_ioctl+0x450/0x554)
[<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44)
[<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790)
[<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68)
[<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34)

Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor
unique.

Fixes: 2bf50d42f3a4 ("UBI: block: Dynamically allocate minor numbers")
Signed-off-by: Bradley Bolen <bradleybolen@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/ubi/block.c |   42 ++++++++++++++++++++++++++----------------
 1 file changed, 26 insertions(+), 16 deletions(-)

--- a/drivers/mtd/ubi/block.c
+++ b/drivers/mtd/ubi/block.c
@@ -99,6 +99,8 @@ struct ubiblock {
 
 /* Linked list of all ubiblock instances */
 static LIST_HEAD(ubiblock_devices);
+static DEFINE_IDR(ubiblock_minor_idr);
+/* Protects ubiblock_devices and ubiblock_minor_idr */
 static DEFINE_MUTEX(devices_mutex);
 static int ubiblock_major;
 
@@ -353,8 +355,6 @@ static struct blk_mq_ops ubiblock_mq_ops
 	.init_request	= ubiblock_init_request,
 };
 
-static DEFINE_IDR(ubiblock_minor_idr);
-
 int ubiblock_create(struct ubi_volume_info *vi)
 {
 	struct ubiblock *dev;
@@ -367,14 +367,15 @@ int ubiblock_create(struct ubi_volume_in
 	/* Check that the volume isn't already handled */
 	mutex_lock(&devices_mutex);
 	if (find_dev_nolock(vi->ubi_num, vi->vol_id)) {
-		mutex_unlock(&devices_mutex);
-		return -EEXIST;
+		ret = -EEXIST;
+		goto out_unlock;
 	}
-	mutex_unlock(&devices_mutex);
 
 	dev = kzalloc(sizeof(struct ubiblock), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
+	if (!dev) {
+		ret = -ENOMEM;
+		goto out_unlock;
+	}
 
 	mutex_init(&dev->dev_mutex);
 
@@ -439,14 +440,13 @@ int ubiblock_create(struct ubi_volume_in
 		goto out_free_queue;
 	}
 
-	mutex_lock(&devices_mutex);
 	list_add_tail(&dev->list, &ubiblock_devices);
-	mutex_unlock(&devices_mutex);
 
 	/* Must be the last step: anyone can call file ops from now on */
 	add_disk(dev->gd);
 	dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
 		 dev->ubi_num, dev->vol_id, vi->name);
+	mutex_unlock(&devices_mutex);
 	return 0;
 
 out_free_queue:
@@ -459,6 +459,8 @@ out_put_disk:
 	put_disk(dev->gd);
 out_free_dev:
 	kfree(dev);
+out_unlock:
+	mutex_unlock(&devices_mutex);
 
 	return ret;
 }
@@ -480,30 +482,36 @@ static void ubiblock_cleanup(struct ubib
 int ubiblock_remove(struct ubi_volume_info *vi)
 {
 	struct ubiblock *dev;
+	int ret;
 
 	mutex_lock(&devices_mutex);
 	dev = find_dev_nolock(vi->ubi_num, vi->vol_id);
 	if (!dev) {
-		mutex_unlock(&devices_mutex);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_unlock;
 	}
 
 	/* Found a device, let's lock it so we can check if it's busy */
 	mutex_lock(&dev->dev_mutex);
 	if (dev->refcnt > 0) {
-		mutex_unlock(&dev->dev_mutex);
-		mutex_unlock(&devices_mutex);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out_unlock_dev;
 	}
 
 	/* Remove from device list */
 	list_del(&dev->list);
-	mutex_unlock(&devices_mutex);
-
 	ubiblock_cleanup(dev);
 	mutex_unlock(&dev->dev_mutex);
+	mutex_unlock(&devices_mutex);
+
 	kfree(dev);
 	return 0;
+
+out_unlock_dev:
+	mutex_unlock(&dev->dev_mutex);
+out_unlock:
+	mutex_unlock(&devices_mutex);
+	return ret;
 }
 
 static int ubiblock_resize(struct ubi_volume_info *vi)
@@ -632,6 +640,7 @@ static void ubiblock_remove_all(void)
 	struct ubiblock *next;
 	struct ubiblock *dev;
 
+	mutex_lock(&devices_mutex);
 	list_for_each_entry_safe(dev, next, &ubiblock_devices, list) {
 		/* The module is being forcefully removed */
 		WARN_ON(dev->desc);
@@ -640,6 +649,7 @@ static void ubiblock_remove_all(void)
 		ubiblock_cleanup(dev);
 		kfree(dev);
 	}
+	mutex_unlock(&devices_mutex);
 }
 
 int __init ubiblock_init(void)

[PATCH 4.9 21/88] ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiaolei Li <xiaolei.li@mediatek.com>

commit d8db5b1ca9d4c57e49893d0f78e6d5ce81450cc8 upstream.

The inode is not locked in init_xattrs when creating a new inode.

Without this patch, there will occurs assert when booting or creating
a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled.

Log likes:

UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156)
CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2
Hardware name: MediaTek MT2712 evaluation board (DT)
Call trace:
[<ffff000008088538>] dump_backtrace+0x0/0x238
[<ffff000008088834>] show_stack+0x14/0x20
[<ffff0000083d98d4>] dump_stack+0x9c/0xc0
[<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0
[<ffff00000835d7ec>] init_xattrs+0x5c/0xb8
[<ffff000008385788>] security_inode_init_security+0x110/0x190
[<ffff00000835e058>] ubifs_init_security+0x30/0x68
[<ffff00000833ada0>] ubifs_mkdir+0x100/0x200
[<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8
[<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0
[<ffff000008082f8c>] __sys_trace_return+0x0/0x4

Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: stable@vger.kernel.org
(julia: massaged to apply to 4.9.y, which doesn't contain fscrypto support)
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/xattr.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -270,7 +270,8 @@ static struct inode *iget_xattr(struct u
 }
 
 static int __ubifs_setxattr(struct inode *host, const char *name,
-			    const void *value, size_t size, int flags)
+			    const void *value, size_t size, int flags,
+			    bool check_lock)
 {
 	struct inode *inode;
 	struct ubifs_info *c = host->i_sb->s_fs_info;
@@ -279,7 +280,8 @@ static int __ubifs_setxattr(struct inode
 	union ubifs_key key;
 	int err;
 
-	ubifs_assert(inode_is_locked(host));
+	if (check_lock)
+		ubifs_assert(inode_is_locked(host));
 
 	if (size > UBIFS_MAX_INO_DATA)
 		return -ERANGE;
@@ -548,7 +550,8 @@ static int init_xattrs(struct inode *ino
 		}
 		strcpy(name, XATTR_SECURITY_PREFIX);
 		strcpy(name + XATTR_SECURITY_PREFIX_LEN, xattr->name);
-		err = __ubifs_setxattr(inode, name, xattr->value, xattr->value_len, 0);
+		err = __ubifs_setxattr(inode, name, xattr->value,
+				       xattr->value_len, 0, false);
 		kfree(name);
 		if (err < 0)
 			break;
@@ -594,7 +597,8 @@ static int ubifs_xattr_set(const struct
 	name = xattr_full_name(handler, name);
 
 	if (value)
-		return __ubifs_setxattr(inode, name, value, size, flags);
+		return __ubifs_setxattr(inode, name, value, size, flags,
+					true);
 	else
 		return __ubifs_removexattr(inode, name);
 }

[PATCH 4.9 22/88] nfs/pnfs: fix nfs_direct_req ref leak when i/o falls back to the mds

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Scott Mayhew <smayhew@redhat.com>

commit ba4a76f703ab7eb72941fdaac848502073d6e9ee upstream.

Currently when falling back to doing I/O through the MDS (via
pnfs_{read|write}_through_mds), the client frees the nfs_pgio_header
without releasing the reference taken on the dreq
via pnfs_generic_pg_{read|write}pages -> nfs_pgheader_init ->
nfs_direct_pgio_init.  It then takes another reference on the dreq via
nfs_generic_pg_pgios -> nfs_pgheader_init -> nfs_direct_pgio_init and
as a result the requester will become stuck in inode_dio_wait.  Once
that happens, other processes accessing the inode will become stuck as
well.

Ensure that pnfs_read_through_mds() and pnfs_write_through_mds() clean
up correctly by calling hdr->completion_ops->completion() instead of
calling hdr->release() directly.

This can be reproduced (sometimes) by performing "storage failover
takeover" commands on NetApp filer while doing direct I/O from a client.

This can also be reproduced using SystemTap to simulate a failure while
doing direct I/O from a client (from Dave Wysochanski
<dwysocha@redhat.com>):

stap -v -g -e 'probe module("nfs_layout_nfsv41_files").function("nfs4_fl_prepare_ds").return { $return=NULL; exit(); }'

Suggested-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Fixes: 1ca018d28d ("pNFS: Fix a memory leak when attempted pnfs fails")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/pnfs.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -2145,7 +2145,7 @@ pnfs_write_through_mds(struct nfs_pageio
 		nfs_pageio_reset_write_mds(desc);
 		mirror->pg_recoalesce = 1;
 	}
-	hdr->release(hdr);
+	hdr->completion_ops->completion(hdr);
 }
 
 static enum pnfs_try_status
@@ -2256,7 +2256,7 @@ pnfs_read_through_mds(struct nfs_pageio_
 		nfs_pageio_reset_read_mds(desc);
 		mirror->pg_recoalesce = 1;
 	}
-	hdr->release(hdr);
+	hdr->completion_ops->completion(hdr);
 }
 
 /*

[PATCH 4.9 23/88] NFS: Add a cond_resched() to nfs_commit_release_pages()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit 7f1bda447c9bd48b415acedba6b830f61591601f upstream.

The commit list can get very large, and so we need a cond_resched()
in nfs_commit_release_pages() in order to ensure we don't hog the CPU
for excessive periods of time.

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/write.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1806,6 +1806,8 @@ static void nfs_commit_release_pages(str
 		set_bit(NFS_CONTEXT_RESEND_WRITES, &req->wb_context->flags);
 	next:
 		nfs_unlock_and_release_request(req);
+		/* Latency breaker */
+		cond_resched();
 	}
 	nfss = NFS_SERVER(data->inode);
 	if (atomic_long_read(&nfss->writeback) < NFS_CONGESTION_OFF_THRESH)

[PATCH 4.9 24/88] NFS: commit direct writes even if they fail partially

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: J. Bruce Fields <bfields@redhat.com>

commit 1b8d97b0a837beaf48a8449955b52c650a7114b4 upstream.

If some of the WRITE calls making up an O_DIRECT write syscall fail,
we neglect to commit, even if some of the WRITEs succeed.

We also depend on the commit code to free the reference count on the
nfs_page taken in the "if (request_commit)" case at the end of
nfs_direct_write_completion().  The problem was originally noticed
because ENOSPC's encountered partway through a write would result in a
closed file being sillyrenamed when it should have been unlinked.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/direct.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -787,10 +787,8 @@ static void nfs_direct_write_completion(
 
 	spin_lock(&dreq->lock);
 
-	if (test_bit(NFS_IOHDR_ERROR, &hdr->flags)) {
-		dreq->flags = 0;
+	if (test_bit(NFS_IOHDR_ERROR, &hdr->flags))
 		dreq->error = hdr->error;
-	}
 	if (dreq->error == 0) {
 		nfs_direct_good_bytes(dreq, hdr);
 		if (nfs_write_need_commit(hdr)) {

[PATCH 4.9 25/88] NFS: reject request for id_legacy key without auxdata

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 49686cbbb3ebafe42e63868222f269d8053ead00 upstream.

nfs_idmap_legacy_upcall() is supposed to be called with 'aux' pointing
to a 'struct idmap', via the call to request_key_with_auxdata() in
nfs_idmap_request_key().

However it can also be reached via the request_key() system call in
which case 'aux' will be NULL, causing a NULL pointer dereference in
nfs_idmap_prepare_pipe_upcall(), assuming that the key description is
valid enough to get that far.

Fix this by making nfs_idmap_legacy_upcall() negate the key if no
auxdata is provided.

As usual, this bug was found by syzkaller.  A simple reproducer using
the command-line keyctl program is:

    keyctl request2 id_legacy uid:0 '' @s

Fixes: 57e62324e469 ("NFS: Store the legacy idmapper result in the keyring")
Reported-by: syzbot+5dfdbcf7b3eb5912abbb@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Trond Myklebust <trondmy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4idmap.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/fs/nfs/nfs4idmap.c
+++ b/fs/nfs/nfs4idmap.c
@@ -567,9 +567,13 @@ static int nfs_idmap_legacy_upcall(struc
 	struct idmap_msg *im;
 	struct idmap *idmap = (struct idmap *)aux;
 	struct key *key = cons->key;
-	int ret = -ENOMEM;
+	int ret = -ENOKEY;
+
+	if (!aux)
+		goto out1;
 
 	/* msg and im are freed in idmap_pipe_destroy_msg */
+	ret = -ENOMEM;
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		goto out1;

[PATCH 4.9 26/88] NFS: Fix a race between mmap() and O_DIRECT

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit e231c6879cfd44e4fffd384bb6dd7d313249a523 upstream.

When locking the file in order to do O_DIRECT on it, we must unmap
any mmapped ranges on the pagecache so that we can flush out the
dirty data.

Fixes: a5864c999de67 ("NFS: Do not serialise O_DIRECT reads and writes")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/io.c
+++ b/fs/nfs/io.c
@@ -98,7 +98,7 @@ static void nfs_block_buffered(struct nf
 {
 	if (!test_bit(NFS_INO_ODIRECT, &nfsi->flags)) {
 		set_bit(NFS_INO_ODIRECT, &nfsi->flags);
-		nfs_wb_all(inode);
+		nfs_sync_mapping(inode->i_mapping);
 	}
 }
 

[PATCH 4.9 27/88] kernfs: fix regression in kernfs_fop_write caused by wrong type

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <ivecera@redhat.com>

commit ba87977a49913129962af8ac35b0e13e0fa4382d upstream.

Commit b7ce40cff0b9 ("kernfs: cache atomic_write_len in
kernfs_open_file") changes type of local variable 'len' from ssize_t
to size_t. This change caused that the *ppos value is updated also
when the previous write callback failed.

Mentioned snippet:
...
len = ops->write(...); <- return value can be negative
...
if (len > 0)           <- true here in this case
        *ppos += len;
...

Fixes: b7ce40cff0b9 ("kernfs: cache atomic_write_len in kernfs_open_file")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/kernfs/file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -275,7 +275,7 @@ static ssize_t kernfs_fop_write(struct f
 {
 	struct kernfs_open_file *of = kernfs_of(file);
 	const struct kernfs_ops *ops;
-	size_t len;
+	ssize_t len;
 	char *buf;
 
 	if (of->atomic_write_len) {

[PATCH 4.9 28/88] ahci: Annotate PCI ids for mobile Intel chipsets as such

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit ca1b4974bd237f2373b0e980b11957aac3499b56 upstream.

Intel uses different SATA PCI ids for the Desktop and Mobile SKUs of their
chipsets. For older models the comment describing which chipset the PCI id
is for, aksi indicates when we're dealing with a mobile SKU. Extend the
comments for recent chipsets to also indicate mobile SKUs.

The information this commit adds comes from Intel's chipset datasheets.

This commit is a preparation patch for allowing a different default
sata link powermanagement policy for mobile chipsets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci.c |   32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -265,9 +265,9 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
 	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
-	{ PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
+	{ PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH M AHCI */
 	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
-	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH M RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
 	{ PCI_VDEVICE(INTEL, 0x19b0), board_ahci }, /* DNV AHCI */
 	{ PCI_VDEVICE(INTEL, 0x19b1), board_ahci }, /* DNV AHCI */
@@ -290,9 +290,9 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x19cE), board_ahci }, /* DNV AHCI */
 	{ PCI_VDEVICE(INTEL, 0x19cF), board_ahci }, /* DNV AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */
-	{ PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT M AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */
-	{ PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */
+	{ PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT M RAID */
 	{ PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */
 	{ PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */
 	{ PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */
@@ -301,20 +301,20 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1e02), board_ahci }, /* Panther Point AHCI */
-	{ PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point M AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1e04), board_ahci }, /* Panther Point RAID */
 	{ PCI_VDEVICE(INTEL, 0x1e05), board_ahci }, /* Panther Point RAID */
 	{ PCI_VDEVICE(INTEL, 0x1e06), board_ahci }, /* Panther Point RAID */
-	{ PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point M RAID */
 	{ PCI_VDEVICE(INTEL, 0x1e0e), board_ahci }, /* Panther Point RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c02), board_ahci }, /* Lynx Point AHCI */
-	{ PCI_VDEVICE(INTEL, 0x8c03), board_ahci }, /* Lynx Point AHCI */
+	{ PCI_VDEVICE(INTEL, 0x8c03), board_ahci }, /* Lynx Point M AHCI */
 	{ PCI_VDEVICE(INTEL, 0x8c04), board_ahci }, /* Lynx Point RAID */
-	{ PCI_VDEVICE(INTEL, 0x8c05), board_ahci }, /* Lynx Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x8c05), board_ahci }, /* Lynx Point M RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c06), board_ahci }, /* Lynx Point RAID */
-	{ PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point M RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */
-	{ PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point M RAID */
 	{ PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */
 	{ PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */
 	{ PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */
@@ -355,21 +355,21 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c82), board_ahci }, /* 9 Series AHCI */
-	{ PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series AHCI */
+	{ PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series M AHCI */
 	{ PCI_VDEVICE(INTEL, 0x8c84), board_ahci }, /* 9 Series RAID */
-	{ PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series RAID */
+	{ PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series M RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c86), board_ahci }, /* 9 Series RAID */
-	{ PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
+	{ PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series M RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
-	{ PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
+	{ PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series M RAID */
 	{ PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */
 	{ PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0xa102), board_ahci }, /* Sunrise Point-H AHCI */
-	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
+	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H M AHCI */
 	{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa106), board_ahci }, /* Sunrise Point-H RAID */
-	{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
+	{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H M RAID */
 	{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Lewisburg AHCI*/

[PATCH 4.9 29/88] ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 998008b779e424bd7513c434d0ab9c1268459009 upstream.

Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI
SATA controllers. This commit is a preparation patch for allowing a
different default sata link powermanagement policy for mobile chipsets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -383,6 +383,10 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0x0f22), board_ahci }, /* Bay Trail AHCI */
+	{ PCI_VDEVICE(INTEL, 0x0f23), board_ahci }, /* Bay Trail AHCI */
+	{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci }, /* Cherry Trail AHCI */
+	{ PCI_VDEVICE(INTEL, 0x5ae3), board_ahci }, /* Apollo Lake AHCI */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

[PATCH 4.9 30/88] ahci: Add Intel Cannon Lake PCH-H PCI ID

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit f919dde0772a894c693a1eeabc77df69d6a9b937 upstream.

Add Intel Cannon Lake PCH-H PCI ID to the list of supported controllers.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -383,6 +383,7 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa356), board_ahci }, /* Cannon Lake PCH-H RAID */
 	{ PCI_VDEVICE(INTEL, 0x0f22), board_ahci }, /* Bay Trail AHCI */
 	{ PCI_VDEVICE(INTEL, 0x0f23), board_ahci }, /* Bay Trail AHCI */
 	{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci }, /* Cherry Trail AHCI */

[PATCH 4.9 31/88] crypto: hash - introduce crypto_hash_alg_has_setkey()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit cd6ed77ad5d223dc6299fb58f62e0f5267f7e2ba upstream.

Templates that use an shash spawn can use crypto_shash_alg_has_setkey()
to determine whether the underlying algorithm requires a key or not.
But there was no corresponding function for ahash spawns.  Add it.

Note that the new function actually has to support both shash and ahash
algorithms, since the ahash API can be used with either.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/ahash.c                 |   11 +++++++++++
 include/crypto/internal/hash.h |    2 ++
 2 files changed, 13 insertions(+)

--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -625,5 +625,16 @@ struct hash_alg_common *ahash_attr_alg(s
 }
 EXPORT_SYMBOL_GPL(ahash_attr_alg);
 
+bool crypto_hash_alg_has_setkey(struct hash_alg_common *halg)
+{
+	struct crypto_alg *alg = &halg->base;
+
+	if (alg->cra_type != &crypto_ahash_type)
+		return crypto_shash_alg_has_setkey(__crypto_shash_alg(alg));
+
+	return __crypto_ahash_alg(alg)->setkey != NULL;
+}
+EXPORT_SYMBOL_GPL(crypto_hash_alg_has_setkey);
+
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Asynchronous cryptographic hash type");
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -88,6 +88,8 @@ static inline bool crypto_shash_alg_has_
 	return alg->setkey != shash_no_setkey;
 }
 
+bool crypto_hash_alg_has_setkey(struct hash_alg_common *halg);
+
 int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
 			    struct hash_alg_common *alg,
 			    struct crypto_instance *inst);

[PATCH 4.9 32/88] crypto: cryptd - pass through absence of ->setkey()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 841a3ff329713f796a63356fef6e2f72e4a3f6a3 upstream.

When the cryptd template is used to wrap an unkeyed hash algorithm,
don't install a ->setkey() method to the cryptd instance.  This change
is necessary for cryptd to keep working with unkeyed hash algorithms
once we start enforcing that ->setkey() is called when present.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/cryptd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -691,7 +691,8 @@ static int cryptd_create_hash(struct cry
 	inst->alg.finup  = cryptd_hash_finup_enqueue;
 	inst->alg.export = cryptd_hash_export;
 	inst->alg.import = cryptd_hash_import;
-	inst->alg.setkey = cryptd_hash_setkey;
+	if (crypto_shash_alg_has_setkey(salg))
+		inst->alg.setkey = cryptd_hash_setkey;
 	inst->alg.digest = cryptd_hash_digest_enqueue;
 
 	err = ahash_register_instance(tmpl, inst);

[PATCH 4.9 33/88] crypto: mcryptd - pass through absence of ->setkey()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit fa59b92d299f2787e6bae1ff078ee0982e80211f upstream.

When the mcryptd template is used to wrap an unkeyed hash algorithm,
don't install a ->setkey() method to the mcryptd instance.  This change
is necessary for mcryptd to keep working with unkeyed hash algorithms
once we start enforcing that ->setkey() is called when present.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/mcryptd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/crypto/mcryptd.c
+++ b/crypto/mcryptd.c
@@ -534,7 +534,8 @@ static int mcryptd_create_hash(struct cr
 	inst->alg.finup  = mcryptd_hash_finup_enqueue;
 	inst->alg.export = mcryptd_hash_export;
 	inst->alg.import = mcryptd_hash_import;
-	inst->alg.setkey = mcryptd_hash_setkey;
+	if (crypto_hash_alg_has_setkey(halg))
+		inst->alg.setkey = mcryptd_hash_setkey;
 	inst->alg.digest = mcryptd_hash_digest_enqueue;
 
 	err = ahash_register_instance(tmpl, inst);

[PATCH 4.9 34/88] crypto: poly1305 - remove ->setkey() method

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit a16e772e664b9a261424107784804cffc8894977 upstream.

Since Poly1305 requires a nonce per invocation, the Linux kernel
implementations of Poly1305 don't use the crypto API's keying mechanism
and instead expect the key and nonce as the first 32 bytes of the data.
But ->setkey() is still defined as a stub returning an error code.  This
prevents Poly1305 from being used through AF_ALG and will also break it
completely once we start enforcing that all crypto API users (not just
AF_ALG) call ->setkey() if present.

Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/poly1305_glue.c |    1 -
 crypto/poly1305_generic.c       |   17 +++++------------
 include/crypto/poly1305.h       |    2 --
 3 files changed, 5 insertions(+), 15 deletions(-)

--- a/arch/x86/crypto/poly1305_glue.c
+++ b/arch/x86/crypto/poly1305_glue.c
@@ -164,7 +164,6 @@ static struct shash_alg alg = {
 	.init		= poly1305_simd_init,
 	.update		= poly1305_simd_update,
 	.final		= crypto_poly1305_final,
-	.setkey		= crypto_poly1305_setkey,
 	.descsize	= sizeof(struct poly1305_simd_desc_ctx),
 	.base		= {
 		.cra_name		= "poly1305",
--- a/crypto/poly1305_generic.c
+++ b/crypto/poly1305_generic.c
@@ -51,17 +51,6 @@ int crypto_poly1305_init(struct shash_de
 }
 EXPORT_SYMBOL_GPL(crypto_poly1305_init);
 
-int crypto_poly1305_setkey(struct crypto_shash *tfm,
-			   const u8 *key, unsigned int keylen)
-{
-	/* Poly1305 requires a unique key for each tag, which implies that
-	 * we can't set it on the tfm that gets accessed by multiple users
-	 * simultaneously. Instead we expect the key as the first 32 bytes in
-	 * the update() call. */
-	return -ENOTSUPP;
-}
-EXPORT_SYMBOL_GPL(crypto_poly1305_setkey);
-
 static void poly1305_setrkey(struct poly1305_desc_ctx *dctx, const u8 *key)
 {
 	/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
@@ -80,6 +69,11 @@ static void poly1305_setskey(struct poly
 	dctx->s[3] = le32_to_cpuvp(key + 12);
 }
 
+/*
+ * Poly1305 requires a unique key for each tag, which implies that we can't set
+ * it on the tfm that gets accessed by multiple users simultaneously. Instead we
+ * expect the key as the first 32 bytes in the update() call.
+ */
 unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
 					const u8 *src, unsigned int srclen)
 {
@@ -285,7 +279,6 @@ static struct shash_alg poly1305_alg = {
 	.init		= crypto_poly1305_init,
 	.update		= crypto_poly1305_update,
 	.final		= crypto_poly1305_final,
-	.setkey		= crypto_poly1305_setkey,
 	.descsize	= sizeof(struct poly1305_desc_ctx),
 	.base		= {
 		.cra_name		= "poly1305",
--- a/include/crypto/poly1305.h
+++ b/include/crypto/poly1305.h
@@ -30,8 +30,6 @@ struct poly1305_desc_ctx {
 };
 
 int crypto_poly1305_init(struct shash_desc *desc);
-int crypto_poly1305_setkey(struct crypto_shash *tfm,
-			   const u8 *key, unsigned int keylen);
 unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx,
 					const u8 *src, unsigned int srclen);
 int crypto_poly1305_update(struct shash_desc *desc,

[PATCH 4.9 35/88] nsfs: mark dentry with DCACHE_RCUACCESS

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

commit 073c516ff73557a8f7315066856c04b50383ac34 upstream.

Andrey reported a use-after-free in __ns_get_path():

  spin_lock include/linux/spinlock.h:299 [inline]
  lockref_get_not_dead+0x19/0x80 lib/lockref.c:179
  __ns_get_path+0x197/0x860 fs/nsfs.c:66
  open_related_ns+0xda/0x200 fs/nsfs.c:143
  sock_ioctl+0x39d/0x440 net/socket.c:1001
  vfs_ioctl fs/ioctl.c:45 [inline]
  do_vfs_ioctl+0x1bf/0x1780 fs/ioctl.c:685
  SYSC_ioctl fs/ioctl.c:700 [inline]
  SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691

We are under rcu read lock protection at that point:

        rcu_read_lock();
        d = atomic_long_read(&ns->stashed);
        if (!d)
                goto slow;
        dentry = (struct dentry *)d;
        if (!lockref_get_not_dead(&dentry->d_lockref))
                goto slow;
        rcu_read_unlock();

but don't use a proper RCU API on the free path, therefore a parallel
__d_free() could free it at the same time.  We need to mark the stashed
dentry with DCACHE_RCUACCESS so that __d_free() will be called after all
readers leave RCU.

Fixes: e149ed2b805f ("take the targets of /proc/*/ns/* symlinks to separate fs")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nsfs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/nsfs.c
+++ b/fs/nsfs.c
@@ -90,6 +90,7 @@ slow:
 		return ERR_PTR(-ENOMEM);
 	}
 	d_instantiate(dentry, inode);
+	dentry->d_flags |= DCACHE_RCUACCESS;
 	dentry->d_fsdata = (void *)ns->ops;
 	d = atomic_long_cmpxchg(&ns->stashed, 0, (unsigned long)dentry);
 	if (d) {

[PATCH 4.9 36/88] media: v4l2-ioctl.c: dont copy back the result for -ENOTTY

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 181a4a2d5a0a7b43cab08a70710d727e7764ccdd upstream.

If the ioctl returned -ENOTTY, then don't bother copying
back the result as there is no point.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-ioctl.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -2862,8 +2862,11 @@ video_usercopy(struct file *file, unsign
 
 	/* Handles IOCTL */
 	err = func(file, cmd, parg);
-	if (err == -ENOIOCTLCMD)
+	if (err == -ENOTTY || err == -ENOIOCTLCMD) {
 		err = -ENOTTY;
+		goto out;
+	}
+
 	if (err == 0) {
 		if (cmd == VIDIOC_DQBUF)
 			trace_v4l2_dqbuf(video_devdata(file)->minor, parg);

[PATCH 4.9 37/88] media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 3ee6d040719ae09110e5cdf24d5386abe5d1b776 upstream.

The result of the VIDIOC_PREPARE_BUF ioctl was never copied back
to userspace since it was missing in the switch.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -1022,6 +1022,7 @@ static long do_video_ioctl(struct file *
 		err = put_v4l2_create32(&karg.v2crt, up);
 		break;
 
+	case VIDIOC_PREPARE_BUF:
 	case VIDIOC_QUERYBUF:
 	case VIDIOC_QBUF:
 	case VIDIOC_DQBUF:

[PATCH 4.9 38/88] media: v4l2-compat-ioctl32.c: fix the indentation

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit b7b957d429f601d6d1942122b339474f31191d75 upstream.

The indentation of this source is all over the place. Fix this.
This patch only changes whitespace.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |  208 +++++++++++++-------------
 1 file changed, 104 insertions(+), 104 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -48,11 +48,11 @@ struct v4l2_window32 {
 static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_window32)) ||
-		copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
-		get_user(kp->field, &up->field) ||
-		get_user(kp->chromakey, &up->chromakey) ||
-		get_user(kp->clipcount, &up->clipcount))
-			return -EFAULT;
+	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
+	    get_user(kp->field, &up->field) ||
+	    get_user(kp->chromakey, &up->chromakey) ||
+	    get_user(kp->clipcount, &up->clipcount))
+		return -EFAULT;
 	if (kp->clipcount > 2048)
 		return -EINVAL;
 	if (kp->clipcount) {
@@ -82,10 +82,10 @@ static int get_v4l2_window32(struct v4l2
 static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
 	if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
-		put_user(kp->field, &up->field) ||
-		put_user(kp->chromakey, &up->chromakey) ||
-		put_user(kp->clipcount, &up->clipcount))
-			return -EFAULT;
+	    put_user(kp->field, &up->field) ||
+	    put_user(kp->chromakey, &up->chromakey) ||
+	    put_user(kp->clipcount, &up->clipcount))
+		return -EFAULT;
 	return 0;
 }
 
@@ -97,7 +97,7 @@ static inline int get_v4l2_pix_format(st
 }
 
 static inline int get_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp,
-				struct v4l2_pix_format_mplane __user *up)
+					     struct v4l2_pix_format_mplane __user *up)
 {
 	if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format_mplane)))
 		return -EFAULT;
@@ -112,7 +112,7 @@ static inline int put_v4l2_pix_format(st
 }
 
 static inline int put_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp,
-				struct v4l2_pix_format_mplane __user *up)
+					     struct v4l2_pix_format_mplane __user *up)
 {
 	if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format_mplane)))
 		return -EFAULT;
@@ -218,7 +218,7 @@ static int __get_v4l2_format32(struct v4
 		return get_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr);
 	default:
 		pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
-								kp->type);
+			kp->type);
 		return -EINVAL;
 	}
 }
@@ -265,7 +265,7 @@ static int __put_v4l2_format32(struct v4
 		return put_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr);
 	default:
 		pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
-								kp->type);
+			kp->type);
 		return -EINVAL;
 	}
 }
@@ -299,7 +299,7 @@ static int get_v4l2_standard32(struct v4
 {
 	/* other fields are not set by the user, nor used by the driver */
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard32)) ||
-		get_user(kp->index, &up->index))
+	    get_user(kp->index, &up->index))
 		return -EFAULT;
 	return 0;
 }
@@ -307,13 +307,13 @@ static int get_v4l2_standard32(struct v4
 static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard32)) ||
-		put_user(kp->index, &up->index) ||
-		put_user(kp->id, &up->id) ||
-		copy_to_user(up->name, kp->name, 24) ||
-		copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) ||
-		put_user(kp->framelines, &up->framelines) ||
-		copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32)))
-			return -EFAULT;
+	    put_user(kp->index, &up->index) ||
+	    put_user(kp->id, &up->id) ||
+	    copy_to_user(up->name, kp->name, 24) ||
+	    copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) ||
+	    put_user(kp->framelines, &up->framelines) ||
+	    copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -353,14 +353,14 @@ struct v4l2_buffer32 {
 };
 
 static int get_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
-				enum v4l2_memory memory)
+			    enum v4l2_memory memory)
 {
 	void __user *up_pln;
 	compat_long_t p;
 
 	if (copy_in_user(up, up32, 2 * sizeof(__u32)) ||
-		copy_in_user(&up->data_offset, &up32->data_offset,
-				sizeof(__u32)))
+	    copy_in_user(&up->data_offset, &up32->data_offset,
+			 sizeof(__u32)))
 		return -EFAULT;
 
 	if (memory == V4L2_MEMORY_USERPTR) {
@@ -374,7 +374,7 @@ static int get_v4l2_plane32(struct v4l2_
 			return -EFAULT;
 	} else {
 		if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset,
-					sizeof(__u32)))
+				 sizeof(__u32)))
 			return -EFAULT;
 	}
 
@@ -382,23 +382,23 @@ static int get_v4l2_plane32(struct v4l2_
 }
 
 static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
-				enum v4l2_memory memory)
+			    enum v4l2_memory memory)
 {
 	if (copy_in_user(up32, up, 2 * sizeof(__u32)) ||
-		copy_in_user(&up32->data_offset, &up->data_offset,
-				sizeof(__u32)))
+	    copy_in_user(&up32->data_offset, &up->data_offset,
+			 sizeof(__u32)))
 		return -EFAULT;
 
 	/* For MMAP, driver might've set up the offset, so copy it back.
 	 * USERPTR stays the same (was userspace-provided), so no copying. */
 	if (memory == V4L2_MEMORY_MMAP)
 		if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset,
-					sizeof(__u32)))
+				 sizeof(__u32)))
 			return -EFAULT;
 	/* For DMABUF, driver might've set up the fd, so copy it back. */
 	if (memory == V4L2_MEMORY_DMABUF)
 		if (copy_in_user(&up32->m.fd, &up->m.fd,
-					sizeof(int)))
+				 sizeof(int)))
 			return -EFAULT;
 
 	return 0;
@@ -413,19 +413,19 @@ static int get_v4l2_buffer32(struct v4l2
 	int ret;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) ||
-		get_user(kp->index, &up->index) ||
-		get_user(kp->type, &up->type) ||
-		get_user(kp->flags, &up->flags) ||
-		get_user(kp->memory, &up->memory) ||
-		get_user(kp->length, &up->length))
-			return -EFAULT;
+	    get_user(kp->index, &up->index) ||
+	    get_user(kp->type, &up->type) ||
+	    get_user(kp->flags, &up->flags) ||
+	    get_user(kp->memory, &up->memory) ||
+	    get_user(kp->length, &up->length))
+		return -EFAULT;
 
 	if (V4L2_TYPE_IS_OUTPUT(kp->type))
 		if (get_user(kp->bytesused, &up->bytesused) ||
-			get_user(kp->field, &up->field) ||
-			get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-			get_user(kp->timestamp.tv_usec,
-					&up->timestamp.tv_usec))
+		    get_user(kp->field, &up->field) ||
+		    get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
+		    get_user(kp->timestamp.tv_usec,
+			     &up->timestamp.tv_usec))
 			return -EFAULT;
 
 	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
@@ -442,13 +442,13 @@ static int get_v4l2_buffer32(struct v4l2
 
 		uplane32 = compat_ptr(p);
 		if (!access_ok(VERIFY_READ, uplane32,
-				num_planes * sizeof(struct v4l2_plane32)))
+			       num_planes * sizeof(struct v4l2_plane32)))
 			return -EFAULT;
 
 		/* We don't really care if userspace decides to kill itself
 		 * by passing a very big num_planes value */
 		uplane = compat_alloc_user_space(num_planes *
-						sizeof(struct v4l2_plane));
+						 sizeof(struct v4l2_plane));
 		kp->m.planes = (__force struct v4l2_plane *)uplane;
 
 		while (--num_planes >= 0) {
@@ -466,12 +466,12 @@ static int get_v4l2_buffer32(struct v4l2
 			break;
 		case V4L2_MEMORY_USERPTR:
 			{
-			compat_long_t tmp;
+				compat_long_t tmp;
 
-			if (get_user(tmp, &up->m.userptr))
-				return -EFAULT;
+				if (get_user(tmp, &up->m.userptr))
+					return -EFAULT;
 
-			kp->m.userptr = (unsigned long)compat_ptr(tmp);
+				kp->m.userptr = (unsigned long)compat_ptr(tmp);
 			}
 			break;
 		case V4L2_MEMORY_OVERLAY:
@@ -497,22 +497,22 @@ static int put_v4l2_buffer32(struct v4l2
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) ||
-		put_user(kp->index, &up->index) ||
-		put_user(kp->type, &up->type) ||
-		put_user(kp->flags, &up->flags) ||
-		put_user(kp->memory, &up->memory))
-			return -EFAULT;
+	    put_user(kp->index, &up->index) ||
+	    put_user(kp->type, &up->type) ||
+	    put_user(kp->flags, &up->flags) ||
+	    put_user(kp->memory, &up->memory))
+		return -EFAULT;
 
 	if (put_user(kp->bytesused, &up->bytesused) ||
-		put_user(kp->field, &up->field) ||
-		put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-		put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) ||
-		copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) ||
-		put_user(kp->sequence, &up->sequence) ||
-		put_user(kp->reserved2, &up->reserved2) ||
-		put_user(kp->reserved, &up->reserved) ||
-		put_user(kp->length, &up->length))
-			return -EFAULT;
+	    put_user(kp->field, &up->field) ||
+	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
+	    put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) ||
+	    copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) ||
+	    put_user(kp->sequence, &up->sequence) ||
+	    put_user(kp->reserved2, &up->reserved2) ||
+	    put_user(kp->reserved, &up->reserved) ||
+	    put_user(kp->length, &up->length))
+		return -EFAULT;
 
 	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
 		num_planes = kp->length;
@@ -576,11 +576,11 @@ static int get_v4l2_framebuffer32(struct
 	u32 tmp;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_framebuffer32)) ||
-		get_user(tmp, &up->base) ||
-		get_user(kp->capability, &up->capability) ||
-		get_user(kp->flags, &up->flags) ||
-		copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt)))
-			return -EFAULT;
+	    get_user(tmp, &up->base) ||
+	    get_user(kp->capability, &up->capability) ||
+	    get_user(kp->flags, &up->flags) ||
+	    copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt)))
+		return -EFAULT;
 	kp->base = (__force void *)compat_ptr(tmp);
 	return 0;
 }
@@ -590,11 +590,11 @@ static int put_v4l2_framebuffer32(struct
 	u32 tmp = (u32)((unsigned long)kp->base);
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_framebuffer32)) ||
-		put_user(tmp, &up->base) ||
-		put_user(kp->capability, &up->capability) ||
-		put_user(kp->flags, &up->flags) ||
-		copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt)))
-			return -EFAULT;
+	    put_user(tmp, &up->base) ||
+	    put_user(kp->capability, &up->capability) ||
+	    put_user(kp->flags, &up->flags) ||
+	    copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -669,12 +669,12 @@ static int get_v4l2_ext_controls32(struc
 	compat_caddr_t p;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_ext_controls32)) ||
-		get_user(kp->which, &up->which) ||
-		get_user(kp->count, &up->count) ||
-		get_user(kp->error_idx, &up->error_idx) ||
-		copy_from_user(kp->reserved, up->reserved,
-			       sizeof(kp->reserved)))
-			return -EFAULT;
+	    get_user(kp->which, &up->which) ||
+	    get_user(kp->count, &up->count) ||
+	    get_user(kp->error_idx, &up->error_idx) ||
+	    copy_from_user(kp->reserved, up->reserved,
+			   sizeof(kp->reserved)))
+		return -EFAULT;
 	n = kp->count;
 	if (n == 0) {
 		kp->controls = NULL;
@@ -684,7 +684,7 @@ static int get_v4l2_ext_controls32(struc
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
 	if (!access_ok(VERIFY_READ, ucontrols,
-			n * sizeof(struct v4l2_ext_control32)))
+		       n * sizeof(struct v4l2_ext_control32)))
 		return -EFAULT;
 	kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control));
 	kp->controls = (__force struct v4l2_ext_control *)kcontrols;
@@ -719,11 +719,11 @@ static int put_v4l2_ext_controls32(struc
 	compat_caddr_t p;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_ext_controls32)) ||
-		put_user(kp->which, &up->which) ||
-		put_user(kp->count, &up->count) ||
-		put_user(kp->error_idx, &up->error_idx) ||
-		copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
-			return -EFAULT;
+	    put_user(kp->which, &up->which) ||
+	    put_user(kp->count, &up->count) ||
+	    put_user(kp->error_idx, &up->error_idx) ||
+	    copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
+		return -EFAULT;
 	if (!kp->count)
 		return 0;
 
@@ -731,7 +731,7 @@ static int put_v4l2_ext_controls32(struc
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
 	if (!access_ok(VERIFY_WRITE, ucontrols,
-			n * sizeof(struct v4l2_ext_control32)))
+		       n * sizeof(struct v4l2_ext_control32)))
 		return -EFAULT;
 
 	while (--n >= 0) {
@@ -769,15 +769,15 @@ struct v4l2_event32 {
 static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) ||
-		put_user(kp->type, &up->type) ||
-		copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
-		put_user(kp->pending, &up->pending) ||
-		put_user(kp->sequence, &up->sequence) ||
-		put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-		put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
-		put_user(kp->id, &up->id) ||
-		copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
-			return -EFAULT;
+	    put_user(kp->type, &up->type) ||
+	    copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
+	    put_user(kp->pending, &up->pending) ||
+	    put_user(kp->sequence, &up->sequence) ||
+	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
+	    put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
+	    put_user(kp->id, &up->id) ||
+	    copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -794,12 +794,12 @@ static int get_v4l2_edid32(struct v4l2_e
 	u32 tmp;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_edid32)) ||
-		get_user(kp->pad, &up->pad) ||
-		get_user(kp->start_block, &up->start_block) ||
-		get_user(kp->blocks, &up->blocks) ||
-		get_user(tmp, &up->edid) ||
-		copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
-			return -EFAULT;
+	    get_user(kp->pad, &up->pad) ||
+	    get_user(kp->start_block, &up->start_block) ||
+	    get_user(kp->blocks, &up->blocks) ||
+	    get_user(tmp, &up->edid) ||
+	    copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
+		return -EFAULT;
 	kp->edid = (__force u8 *)compat_ptr(tmp);
 	return 0;
 }
@@ -809,12 +809,12 @@ static int put_v4l2_edid32(struct v4l2_e
 	u32 tmp = (u32)((unsigned long)kp->edid);
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_edid32)) ||
-		put_user(kp->pad, &up->pad) ||
-		put_user(kp->start_block, &up->start_block) ||
-		put_user(kp->blocks, &up->blocks) ||
-		put_user(tmp, &up->edid) ||
-		copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
-			return -EFAULT;
+	    put_user(kp->pad, &up->pad) ||
+	    put_user(kp->start_block, &up->start_block) ||
+	    put_user(kp->blocks, &up->blocks) ||
+	    put_user(tmp, &up->edid) ||
+	    copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
+		return -EFAULT;
 	return 0;
 }
 

[PATCH 4.9 39/88] media: v4l2-compat-ioctl32.c: move helper functions to __get/put_v4l2_format32

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 486c521510c44a04cd756a9267e7d1e271c8a4ba upstream.

These helper functions do not really help. Move the code to the
__get/put_v4l2_format32 functions.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |  104 +++++---------------------
 1 file changed, 20 insertions(+), 84 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -89,78 +89,6 @@ static int put_v4l2_window32(struct v4l2
 	return 0;
 }
 
-static inline int get_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int get_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp,
-					     struct v4l2_pix_format_mplane __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format_mplane)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp,
-					     struct v4l2_pix_format_mplane __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format_mplane)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int get_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_vbi_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_vbi_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int get_v4l2_sliced_vbi_format(struct v4l2_sliced_vbi_format *kp, struct v4l2_sliced_vbi_format __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_sliced_vbi_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_sliced_vbi_format(struct v4l2_sliced_vbi_format *kp, struct v4l2_sliced_vbi_format __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_sliced_vbi_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int get_v4l2_sdr_format(struct v4l2_sdr_format *kp, struct v4l2_sdr_format __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_sdr_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_sdr_format(struct v4l2_sdr_format *kp, struct v4l2_sdr_format __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_sdr_format)))
-		return -EFAULT;
-	return 0;
-}
-
 struct v4l2_format32 {
 	__u32	type;	/* enum v4l2_buf_type */
 	union {
@@ -199,23 +127,27 @@ static int __get_v4l2_format32(struct v4
 	switch (kp->type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return get_v4l2_pix_format(&kp->fmt.pix, &up->fmt.pix);
+		return copy_from_user(&kp->fmt.pix, &up->fmt.pix,
+				      sizeof(kp->fmt.pix)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return get_v4l2_pix_format_mplane(&kp->fmt.pix_mp,
-						  &up->fmt.pix_mp);
+		return copy_from_user(&kp->fmt.pix_mp, &up->fmt.pix_mp,
+				      sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
 		return get_v4l2_window32(&kp->fmt.win, &up->fmt.win);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		return get_v4l2_vbi_format(&kp->fmt.vbi, &up->fmt.vbi);
+		return copy_from_user(&kp->fmt.vbi, &up->fmt.vbi,
+				      sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		return get_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced);
+		return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced,
+				      sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SDR_CAPTURE:
 	case V4L2_BUF_TYPE_SDR_OUTPUT:
-		return get_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr);
+		return copy_from_user(&kp->fmt.sdr, &up->fmt.sdr,
+				      sizeof(kp->fmt.sdr)) ? -EFAULT : 0;
 	default:
 		pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
 			kp->type);
@@ -246,23 +178,27 @@ static int __put_v4l2_format32(struct v4
 	switch (kp->type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return put_v4l2_pix_format(&kp->fmt.pix, &up->fmt.pix);
+		return copy_to_user(&up->fmt.pix, &kp->fmt.pix,
+				    sizeof(kp->fmt.pix)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return put_v4l2_pix_format_mplane(&kp->fmt.pix_mp,
-						  &up->fmt.pix_mp);
+		return copy_to_user(&up->fmt.pix_mp, &kp->fmt.pix_mp,
+				    sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
 		return put_v4l2_window32(&kp->fmt.win, &up->fmt.win);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		return put_v4l2_vbi_format(&kp->fmt.vbi, &up->fmt.vbi);
+		return copy_to_user(&up->fmt.vbi, &kp->fmt.vbi,
+				    sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		return put_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced);
+		return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced,
+				    sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SDR_CAPTURE:
 	case V4L2_BUF_TYPE_SDR_OUTPUT:
-		return put_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr);
+		return copy_to_user(&up->fmt.sdr, &kp->fmt.sdr,
+				    sizeof(kp->fmt.sdr)) ? -EFAULT : 0;
 	default:
 		pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
 			kp->type);

[PATCH 4.9 40/88] media: v4l2-compat-ioctl32.c: avoid sizeof(type)

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 333b1e9f96ce05f7498b581509bb30cde03018bf upstream.

Instead of doing sizeof(struct foo) use sizeof(*up). There even were
cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved),
which is very dangerous when the size of the reserved array changes.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   77 ++++++++++++--------------
 1 file changed, 36 insertions(+), 41 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -47,7 +47,7 @@ struct v4l2_window32 {
 
 static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_window32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
 	    get_user(kp->field, &up->field) ||
 	    get_user(kp->chromakey, &up->chromakey) ||
@@ -64,7 +64,7 @@ static int get_v4l2_window32(struct v4l2
 		if (get_user(p, &up->clips))
 			return -EFAULT;
 		uclips = compat_ptr(p);
-		kclips = compat_alloc_user_space(n * sizeof(struct v4l2_clip));
+		kclips = compat_alloc_user_space(n * sizeof(*kclips));
 		kp->clips = kclips;
 		while (--n >= 0) {
 			if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
@@ -157,14 +157,14 @@ static int __get_v4l2_format32(struct v4
 
 static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32)))
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)))
 		return -EFAULT;
 	return __get_v4l2_format32(kp, up);
 }
 
 static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_create_buffers32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format)))
 		return -EFAULT;
 	return __get_v4l2_format32(&kp->format, &up->format);
@@ -208,14 +208,14 @@ static int __put_v4l2_format32(struct v4
 
 static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_format32)))
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)))
 		return -EFAULT;
 	return __put_v4l2_format32(kp, up);
 }
 
 static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_create_buffers32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) ||
 	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
@@ -234,7 +234,7 @@ struct v4l2_standard32 {
 static int get_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
 {
 	/* other fields are not set by the user, nor used by the driver */
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(kp->index, &up->index))
 		return -EFAULT;
 	return 0;
@@ -242,13 +242,13 @@ static int get_v4l2_standard32(struct v4
 
 static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->index, &up->index) ||
 	    put_user(kp->id, &up->id) ||
-	    copy_to_user(up->name, kp->name, 24) ||
+	    copy_to_user(up->name, kp->name, sizeof(up->name)) ||
 	    copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) ||
 	    put_user(kp->framelines, &up->framelines) ||
-	    copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32)))
+	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -296,7 +296,7 @@ static int get_v4l2_plane32(struct v4l2_
 
 	if (copy_in_user(up, up32, 2 * sizeof(__u32)) ||
 	    copy_in_user(&up->data_offset, &up32->data_offset,
-			 sizeof(__u32)))
+			 sizeof(up->data_offset)))
 		return -EFAULT;
 
 	if (memory == V4L2_MEMORY_USERPTR) {
@@ -306,11 +306,11 @@ static int get_v4l2_plane32(struct v4l2_
 		if (put_user((unsigned long)up_pln, &up->m.userptr))
 			return -EFAULT;
 	} else if (memory == V4L2_MEMORY_DMABUF) {
-		if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(int)))
+		if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(up32->m.fd)))
 			return -EFAULT;
 	} else {
 		if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset,
-				 sizeof(__u32)))
+				 sizeof(up32->m.mem_offset)))
 			return -EFAULT;
 	}
 
@@ -322,19 +322,19 @@ static int put_v4l2_plane32(struct v4l2_
 {
 	if (copy_in_user(up32, up, 2 * sizeof(__u32)) ||
 	    copy_in_user(&up32->data_offset, &up->data_offset,
-			 sizeof(__u32)))
+			 sizeof(up->data_offset)))
 		return -EFAULT;
 
 	/* For MMAP, driver might've set up the offset, so copy it back.
 	 * USERPTR stays the same (was userspace-provided), so no copying. */
 	if (memory == V4L2_MEMORY_MMAP)
 		if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset,
-				 sizeof(__u32)))
+				 sizeof(up->m.mem_offset)))
 			return -EFAULT;
 	/* For DMABUF, driver might've set up the fd, so copy it back. */
 	if (memory == V4L2_MEMORY_DMABUF)
 		if (copy_in_user(&up32->m.fd, &up->m.fd,
-				 sizeof(int)))
+				 sizeof(up->m.fd)))
 			return -EFAULT;
 
 	return 0;
@@ -348,7 +348,7 @@ static int get_v4l2_buffer32(struct v4l2
 	int num_planes;
 	int ret;
 
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(kp->index, &up->index) ||
 	    get_user(kp->type, &up->type) ||
 	    get_user(kp->flags, &up->flags) ||
@@ -360,8 +360,7 @@ static int get_v4l2_buffer32(struct v4l2
 		if (get_user(kp->bytesused, &up->bytesused) ||
 		    get_user(kp->field, &up->field) ||
 		    get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-		    get_user(kp->timestamp.tv_usec,
-			     &up->timestamp.tv_usec))
+		    get_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec))
 			return -EFAULT;
 
 	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
@@ -378,13 +377,12 @@ static int get_v4l2_buffer32(struct v4l2
 
 		uplane32 = compat_ptr(p);
 		if (!access_ok(VERIFY_READ, uplane32,
-			       num_planes * sizeof(struct v4l2_plane32)))
+			       num_planes * sizeof(*uplane32)))
 			return -EFAULT;
 
 		/* We don't really care if userspace decides to kill itself
 		 * by passing a very big num_planes value */
-		uplane = compat_alloc_user_space(num_planes *
-						 sizeof(struct v4l2_plane));
+		uplane = compat_alloc_user_space(num_planes * sizeof(*uplane));
 		kp->m.planes = (__force struct v4l2_plane *)uplane;
 
 		while (--num_planes >= 0) {
@@ -432,7 +430,7 @@ static int put_v4l2_buffer32(struct v4l2
 	int num_planes;
 	int ret;
 
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->index, &up->index) ||
 	    put_user(kp->type, &up->type) ||
 	    put_user(kp->flags, &up->flags) ||
@@ -443,7 +441,7 @@ static int put_v4l2_buffer32(struct v4l2
 	    put_user(kp->field, &up->field) ||
 	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
 	    put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) ||
-	    copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) ||
+	    copy_to_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) ||
 	    put_user(kp->sequence, &up->sequence) ||
 	    put_user(kp->reserved2, &up->reserved2) ||
 	    put_user(kp->reserved, &up->reserved) ||
@@ -511,7 +509,7 @@ static int get_v4l2_framebuffer32(struct
 {
 	u32 tmp;
 
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_framebuffer32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(tmp, &up->base) ||
 	    get_user(kp->capability, &up->capability) ||
 	    get_user(kp->flags, &up->flags) ||
@@ -525,7 +523,7 @@ static int put_v4l2_framebuffer32(struct
 {
 	u32 tmp = (u32)((unsigned long)kp->base);
 
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_framebuffer32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(tmp, &up->base) ||
 	    put_user(kp->capability, &up->capability) ||
 	    put_user(kp->flags, &up->flags) ||
@@ -549,14 +547,14 @@ struct v4l2_input32 {
    Otherwise it is identical to the 32-bit version. */
 static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up)
 {
-	if (copy_from_user(kp, up, sizeof(struct v4l2_input32)))
+	if (copy_from_user(kp, up, sizeof(*up)))
 		return -EFAULT;
 	return 0;
 }
 
 static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up)
 {
-	if (copy_to_user(up, kp, sizeof(struct v4l2_input32)))
+	if (copy_to_user(up, kp, sizeof(*up)))
 		return -EFAULT;
 	return 0;
 }
@@ -604,12 +602,11 @@ static int get_v4l2_ext_controls32(struc
 	int n;
 	compat_caddr_t p;
 
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_ext_controls32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(kp->which, &up->which) ||
 	    get_user(kp->count, &up->count) ||
 	    get_user(kp->error_idx, &up->error_idx) ||
-	    copy_from_user(kp->reserved, up->reserved,
-			   sizeof(kp->reserved)))
+	    copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
 	n = kp->count;
 	if (n == 0) {
@@ -619,10 +616,9 @@ static int get_v4l2_ext_controls32(struc
 	if (get_user(p, &up->controls))
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
-	if (!access_ok(VERIFY_READ, ucontrols,
-		       n * sizeof(struct v4l2_ext_control32)))
+	if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(*ucontrols)))
 		return -EFAULT;
-	kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control));
+	kcontrols = compat_alloc_user_space(n * sizeof(*kcontrols));
 	kp->controls = (__force struct v4l2_ext_control *)kcontrols;
 	while (--n >= 0) {
 		u32 id;
@@ -654,7 +650,7 @@ static int put_v4l2_ext_controls32(struc
 	int n = kp->count;
 	compat_caddr_t p;
 
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_ext_controls32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->which, &up->which) ||
 	    put_user(kp->count, &up->count) ||
 	    put_user(kp->error_idx, &up->error_idx) ||
@@ -666,8 +662,7 @@ static int put_v4l2_ext_controls32(struc
 	if (get_user(p, &up->controls))
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
-	if (!access_ok(VERIFY_WRITE, ucontrols,
-		       n * sizeof(struct v4l2_ext_control32)))
+	if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(*ucontrols)))
 		return -EFAULT;
 
 	while (--n >= 0) {
@@ -704,7 +699,7 @@ struct v4l2_event32 {
 
 static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->type, &up->type) ||
 	    copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
 	    put_user(kp->pending, &up->pending) ||
@@ -712,7 +707,7 @@ static int put_v4l2_event32(struct v4l2_
 	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
 	    put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
 	    put_user(kp->id, &up->id) ||
-	    copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
+	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -729,7 +724,7 @@ static int get_v4l2_edid32(struct v4l2_e
 {
 	u32 tmp;
 
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_edid32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(kp->pad, &up->pad) ||
 	    get_user(kp->start_block, &up->start_block) ||
 	    get_user(kp->blocks, &up->blocks) ||
@@ -744,7 +739,7 @@ static int put_v4l2_edid32(struct v4l2_e
 {
 	u32 tmp = (u32)((unsigned long)kp->edid);
 
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_edid32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->pad, &up->pad) ||
 	    put_user(kp->start_block, &up->start_block) ||
 	    put_user(kp->blocks, &up->blocks) ||

[PATCH 4.9 41/88] media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 8ed5a59dcb47a6f76034ee760b36e089f3e82529 upstream.

The struct v4l2_plane32 should set m.userptr as well. The same
happens in v4l2_buffer32 and v4l2-compliance tests for this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   47 +++++++++++++++-----------
 1 file changed, 28 insertions(+), 19 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -299,19 +299,24 @@ static int get_v4l2_plane32(struct v4l2_
 			 sizeof(up->data_offset)))
 		return -EFAULT;
 
-	if (memory == V4L2_MEMORY_USERPTR) {
+	switch (memory) {
+	case V4L2_MEMORY_MMAP:
+	case V4L2_MEMORY_OVERLAY:
+		if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset,
+				 sizeof(up32->m.mem_offset)))
+			return -EFAULT;
+		break;
+	case V4L2_MEMORY_USERPTR:
 		if (get_user(p, &up32->m.userptr))
 			return -EFAULT;
 		up_pln = compat_ptr(p);
 		if (put_user((unsigned long)up_pln, &up->m.userptr))
 			return -EFAULT;
-	} else if (memory == V4L2_MEMORY_DMABUF) {
+		break;
+	case V4L2_MEMORY_DMABUF:
 		if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(up32->m.fd)))
 			return -EFAULT;
-	} else {
-		if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset,
-				 sizeof(up32->m.mem_offset)))
-			return -EFAULT;
+		break;
 	}
 
 	return 0;
@@ -320,22 +325,32 @@ static int get_v4l2_plane32(struct v4l2_
 static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
 			    enum v4l2_memory memory)
 {
+	unsigned long p;
+
 	if (copy_in_user(up32, up, 2 * sizeof(__u32)) ||
 	    copy_in_user(&up32->data_offset, &up->data_offset,
 			 sizeof(up->data_offset)))
 		return -EFAULT;
 
-	/* For MMAP, driver might've set up the offset, so copy it back.
-	 * USERPTR stays the same (was userspace-provided), so no copying. */
-	if (memory == V4L2_MEMORY_MMAP)
+	switch (memory) {
+	case V4L2_MEMORY_MMAP:
+	case V4L2_MEMORY_OVERLAY:
 		if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset,
 				 sizeof(up->m.mem_offset)))
 			return -EFAULT;
-	/* For DMABUF, driver might've set up the fd, so copy it back. */
-	if (memory == V4L2_MEMORY_DMABUF)
+		break;
+	case V4L2_MEMORY_USERPTR:
+		if (get_user(p, &up->m.userptr) ||
+		    put_user((compat_ulong_t)ptr_to_compat((__force void *)p),
+			     &up32->m.userptr))
+			return -EFAULT;
+		break;
+	case V4L2_MEMORY_DMABUF:
 		if (copy_in_user(&up32->m.fd, &up->m.fd,
 				 sizeof(up->m.fd)))
 			return -EFAULT;
+		break;
+	}
 
 	return 0;
 }
@@ -395,6 +410,7 @@ static int get_v4l2_buffer32(struct v4l2
 	} else {
 		switch (kp->memory) {
 		case V4L2_MEMORY_MMAP:
+		case V4L2_MEMORY_OVERLAY:
 			if (get_user(kp->m.offset, &up->m.offset))
 				return -EFAULT;
 			break;
@@ -408,10 +424,6 @@ static int get_v4l2_buffer32(struct v4l2
 				kp->m.userptr = (unsigned long)compat_ptr(tmp);
 			}
 			break;
-		case V4L2_MEMORY_OVERLAY:
-			if (get_user(kp->m.offset, &up->m.offset))
-				return -EFAULT;
-			break;
 		case V4L2_MEMORY_DMABUF:
 			if (get_user(kp->m.fd, &up->m.fd))
 				return -EFAULT;
@@ -468,6 +480,7 @@ static int put_v4l2_buffer32(struct v4l2
 	} else {
 		switch (kp->memory) {
 		case V4L2_MEMORY_MMAP:
+		case V4L2_MEMORY_OVERLAY:
 			if (put_user(kp->m.offset, &up->m.offset))
 				return -EFAULT;
 			break;
@@ -475,10 +488,6 @@ static int put_v4l2_buffer32(struct v4l2
 			if (put_user(kp->m.userptr, &up->m.userptr))
 				return -EFAULT;
 			break;
-		case V4L2_MEMORY_OVERLAY:
-			if (put_user(kp->m.offset, &up->m.offset))
-				return -EFAULT;
-			break;
 		case V4L2_MEMORY_DMABUF:
 			if (put_user(kp->m.fd, &up->m.fd))
 				return -EFAULT;

[PATCH 4.9 42/88] media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit b8c601e8af2d08f733d74defa8465303391bb930 upstream.

ctrl_is_pointer just hardcoded two known string controls, but that
caused problems when using e.g. custom controls that use a pointer
for the payload.

Reimplement this function: it now finds the v4l2_ctrl (if the driver
uses the control framework) or it calls vidioc_query_ext_ctrl (if the
driver implements that directly).

In both cases it can now check if the control is a pointer control
or not.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   59 +++++++++++++++++---------
 1 file changed, 39 insertions(+), 20 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -18,6 +18,8 @@
 #include <linux/videodev2.h>
 #include <linux/v4l2-subdev.h>
 #include <media/v4l2-dev.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-ioctl.h>
 
 static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -587,24 +589,39 @@ struct v4l2_ext_control32 {
 	};
 } __attribute__ ((packed));
 
-/* The following function really belong in v4l2-common, but that causes
-   a circular dependency between modules. We need to think about this, but
-   for now this will do. */
-
-/* Return non-zero if this control is a pointer type. Currently only
-   type STRING is a pointer type. */
-static inline int ctrl_is_pointer(u32 id)
-{
-	switch (id) {
-	case V4L2_CID_RDS_TX_PS_NAME:
-	case V4L2_CID_RDS_TX_RADIO_TEXT:
-		return 1;
-	default:
-		return 0;
+/* Return true if this control is a pointer type. */
+static inline bool ctrl_is_pointer(struct file *file, u32 id)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct v4l2_fh *fh = NULL;
+	struct v4l2_ctrl_handler *hdl = NULL;
+	struct v4l2_query_ext_ctrl qec = { id };
+	const struct v4l2_ioctl_ops *ops = vdev->ioctl_ops;
+
+	if (test_bit(V4L2_FL_USES_V4L2_FH, &vdev->flags))
+		fh = file->private_data;
+
+	if (fh && fh->ctrl_handler)
+		hdl = fh->ctrl_handler;
+	else if (vdev->ctrl_handler)
+		hdl = vdev->ctrl_handler;
+
+	if (hdl) {
+		struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, id);
+
+		return ctrl && ctrl->is_ptr;
 	}
+
+	if (!ops->vidioc_query_ext_ctrl)
+		return false;
+
+	return !ops->vidioc_query_ext_ctrl(file, fh, &qec) &&
+		(qec.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD);
 }
 
-static int get_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext_controls32 __user *up)
+static int get_v4l2_ext_controls32(struct file *file,
+				   struct v4l2_ext_controls *kp,
+				   struct v4l2_ext_controls32 __user *up)
 {
 	struct v4l2_ext_control32 __user *ucontrols;
 	struct v4l2_ext_control __user *kcontrols;
@@ -636,7 +653,7 @@ static int get_v4l2_ext_controls32(struc
 			return -EFAULT;
 		if (get_user(id, &kcontrols->id))
 			return -EFAULT;
-		if (ctrl_is_pointer(id)) {
+		if (ctrl_is_pointer(file, id)) {
 			void __user *s;
 
 			if (get_user(p, &ucontrols->string))
@@ -651,7 +668,9 @@ static int get_v4l2_ext_controls32(struc
 	return 0;
 }
 
-static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext_controls32 __user *up)
+static int put_v4l2_ext_controls32(struct file *file,
+				   struct v4l2_ext_controls *kp,
+				   struct v4l2_ext_controls32 __user *up)
 {
 	struct v4l2_ext_control32 __user *ucontrols;
 	struct v4l2_ext_control __user *kcontrols =
@@ -683,7 +702,7 @@ static int put_v4l2_ext_controls32(struc
 		/* Do not modify the pointer when copying a pointer control.
 		   The contents of the pointer was changed, not the pointer
 		   itself. */
-		if (ctrl_is_pointer(id))
+		if (ctrl_is_pointer(file, id))
 			size -= sizeof(ucontrols->value64);
 		if (copy_in_user(ucontrols, kcontrols, size))
 			return -EFAULT;
@@ -897,7 +916,7 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_G_EXT_CTRLS:
 	case VIDIOC_S_EXT_CTRLS:
 	case VIDIOC_TRY_EXT_CTRLS:
-		err = get_v4l2_ext_controls32(&karg.v2ecs, up);
+		err = get_v4l2_ext_controls32(file, &karg.v2ecs, up);
 		compatible_arg = 0;
 		break;
 	case VIDIOC_DQEVENT:
@@ -924,7 +943,7 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_G_EXT_CTRLS:
 	case VIDIOC_S_EXT_CTRLS:
 	case VIDIOC_TRY_EXT_CTRLS:
-		if (put_v4l2_ext_controls32(&karg.v2ecs, up))
+		if (put_v4l2_ext_controls32(file, &karg.v2ecs, up))
 			err = -EFAULT;
 		break;
 	}

[PATCH 4.9 43/88] media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hansverk@cisco.com>

commit 273caa260035c03d89ad63d72d8cd3d9e5c5e3f1 upstream.

If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops
is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash.
Add a test for !ops to the condition.

All sub-devices that have controls will use the control framework,
so they do not have an equivalent to ops->vidioc_query_ext_ctrl.
Returning false if ops is NULL is the correct thing to do here.

Fixes: b8c601e8af ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer")

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -612,7 +612,7 @@ static inline bool ctrl_is_pointer(struc
 		return ctrl && ctrl->is_ptr;
 	}
 
-	if (!ops->vidioc_query_ext_ctrl)
+	if (!ops || !ops->vidioc_query_ext_ctrl)
 		return false;
 
 	return !ops->vidioc_query_ext_ctrl(file, fh, &qec) &&

[PATCH 4.9 44/88] media: v4l2-compat-ioctl32: Copy v4l2_window->global_alpha

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mentz <danielmentz@google.com>

commit 025a26fa14f8fd55d50ab284a30c016a5be953d0 upstream.

Commit b2787845fb91 ("V4L/DVB (5289): Add support for video output
overlays.") added the field global_alpha to struct v4l2_window but did
not update the compat layer accordingly. This change adds global_alpha
to struct v4l2_window32 and copies the value for global_alpha back and
forth.

Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -45,6 +45,7 @@ struct v4l2_window32 {
 	compat_caddr_t		clips; /* actually struct v4l2_clip32 * */
 	__u32			clipcount;
 	compat_caddr_t		bitmap;
+	__u8                    global_alpha;
 };
 
 static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
@@ -53,7 +54,8 @@ static int get_v4l2_window32(struct v4l2
 	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
 	    get_user(kp->field, &up->field) ||
 	    get_user(kp->chromakey, &up->chromakey) ||
-	    get_user(kp->clipcount, &up->clipcount))
+	    get_user(kp->clipcount, &up->clipcount) ||
+	    get_user(kp->global_alpha, &up->global_alpha))
 		return -EFAULT;
 	if (kp->clipcount > 2048)
 		return -EINVAL;
@@ -86,7 +88,8 @@ static int put_v4l2_window32(struct v4l2
 	if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
 	    put_user(kp->field, &up->field) ||
 	    put_user(kp->chromakey, &up->chromakey) ||
-	    put_user(kp->clipcount, &up->clipcount))
+	    put_user(kp->clipcount, &up->clipcount) ||
+	    put_user(kp->global_alpha, &up->global_alpha))
 		return -EFAULT;
 	return 0;
 }

[PATCH 4.9 45/88] media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit a751be5b142ef6bcbbb96d9899516f4d9c8d0ef4 upstream.

put_v4l2_window32() didn't copy back the clip list to userspace.
Drivers can update the clip rectangles, so this should be done.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   59 +++++++++++++++++---------
 1 file changed, 40 insertions(+), 19 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -50,6 +50,11 @@ struct v4l2_window32 {
 
 static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
+	struct v4l2_clip32 __user *uclips;
+	struct v4l2_clip __user *kclips;
+	compat_caddr_t p;
+	u32 n;
+
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
 	    get_user(kp->field, &up->field) ||
@@ -59,38 +64,54 @@ static int get_v4l2_window32(struct v4l2
 		return -EFAULT;
 	if (kp->clipcount > 2048)
 		return -EINVAL;
-	if (kp->clipcount) {
-		struct v4l2_clip32 __user *uclips;
-		struct v4l2_clip __user *kclips;
-		int n = kp->clipcount;
-		compat_caddr_t p;
+	if (!kp->clipcount) {
+		kp->clips = NULL;
+		return 0;
+	}
 
-		if (get_user(p, &up->clips))
+	n = kp->clipcount;
+	if (get_user(p, &up->clips))
+		return -EFAULT;
+	uclips = compat_ptr(p);
+	kclips = compat_alloc_user_space(n * sizeof(*kclips));
+	kp->clips = kclips;
+	while (n--) {
+		if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
 			return -EFAULT;
-		uclips = compat_ptr(p);
-		kclips = compat_alloc_user_space(n * sizeof(*kclips));
-		kp->clips = kclips;
-		while (--n >= 0) {
-			if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
-				return -EFAULT;
-			if (put_user(n ? kclips + 1 : NULL, &kclips->next))
-				return -EFAULT;
-			uclips += 1;
-			kclips += 1;
-		}
-	} else
-		kp->clips = NULL;
+		if (put_user(n ? kclips + 1 : NULL, &kclips->next))
+			return -EFAULT;
+		uclips++;
+		kclips++;
+	}
 	return 0;
 }
 
 static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
+	struct v4l2_clip __user *kclips = kp->clips;
+	struct v4l2_clip32 __user *uclips;
+	u32 n = kp->clipcount;
+	compat_caddr_t p;
+
 	if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
 	    put_user(kp->field, &up->field) ||
 	    put_user(kp->chromakey, &up->chromakey) ||
 	    put_user(kp->clipcount, &up->clipcount) ||
 	    put_user(kp->global_alpha, &up->global_alpha))
 		return -EFAULT;
+
+	if (!kp->clipcount)
+		return 0;
+
+	if (get_user(p, &up->clips))
+		return -EFAULT;
+	uclips = compat_ptr(p);
+	while (n--) {
+		if (copy_in_user(&uclips->c, &kclips->c, sizeof(uclips->c)))
+			return -EFAULT;
+		uclips++;
+		kclips++;
+	}
 	return 0;
 }
 

[PATCH 4.9 46/88] media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 169f24ca68bf0f247d111aef07af00dd3a02ae88 upstream.

There is nothing wrong with using an unknown buffer type. So
stop spamming the kernel log whenever this happens. The kernel
will just return -EINVAL to signal this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -175,8 +175,6 @@ static int __get_v4l2_format32(struct v4
 		return copy_from_user(&kp->fmt.sdr, &up->fmt.sdr,
 				      sizeof(kp->fmt.sdr)) ? -EFAULT : 0;
 	default:
-		pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
-			kp->type);
 		return -EINVAL;
 	}
 }
@@ -226,8 +224,6 @@ static int __put_v4l2_format32(struct v4
 		return copy_to_user(&up->fmt.sdr, &kp->fmt.sdr,
 				    sizeof(kp->fmt.sdr)) ? -EFAULT : 0;
 	default:
-		pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
-			kp->type);
 		return -EINVAL;
 	}
 }

[PATCH 4.9 47/88] media: v4l2-compat-ioctl32.c: dont copy back the result for certain errors

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit d83a8243aaefe62ace433e4384a4f077bed86acb upstream.

Some ioctls need to copy back the result even if the ioctl returned
an error. However, don't do this for the error code -ENOTTY.
It makes no sense in that cases.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -956,6 +956,9 @@ static long do_video_ioctl(struct file *
 		set_fs(old_fs);
 	}
 
+	if (err == -ENOTTY)
+		return err;
+
 	/* Special case: even after an error we need to put the
 	   results back for these ioctls since the error_idx will
 	   contain information on which control failed. */

[PATCH 4.9 48/88] media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mentz <danielmentz@google.com>

commit a1dfb4c48cc1e64eeb7800a27c66a6f7e88d075a upstream.

The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit
equivalent. It converts 32-bit data structures into its 64-bit
equivalents and needs to provide the data to the 64-bit ioctl in user
space memory which is commonly allocated using
compat_alloc_user_space().

However, due to how that function is implemented, it can only be called
a single time for every syscall invocation.

Supposedly to avoid this limitation, the existing code uses a mix of
memory from the kernel stack and memory allocated through
compat_alloc_user_space().

Under normal circumstances, this would not work, because the 64-bit
ioctl expects all pointers to point to user space memory. As a
workaround, set_fs(KERNEL_DS) is called to temporarily disable this
extra safety check and allow kernel pointers. However, this might
introduce a security vulnerability: The result of the 32-bit to 64-bit
conversion is writeable by user space because the output buffer has been
allocated via compat_alloc_user_space(). A malicious user space process
could then manipulate pointers inside this output buffer, and due to the
previous set_fs(KERNEL_DS) call, functions like get_user() or put_user()
no longer prevent kernel memory access.

The new approach is to pre-calculate the total amount of user space
memory that is needed, allocate it using compat_alloc_user_space() and
then divide up the allocated memory to accommodate all data structures
that need to be converted.

An alternative approach would have been to retain the union type karg
that they allocated on the kernel stack in do_video_ioctl(), copy all
data from user space into karg and then back to user space. However, we
decided against this approach because it does not align with other
compat syscall implementations. Instead, we tried to replicate the
get_user/put_user pairs as found in other places in the kernel:

    if (get_user(clipcount, &up->clipcount) ||
        put_user(clipcount, &kp->clipcount)) return -EFAULT;

Notes from hans.verkuil@cisco.com:

This patch was taken from:
    https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7

Clearly nobody could be bothered to upstream this patch or at minimum
tell us :-( We only heard about this a week ago.

This patch was rebased and cleaned up. Compared to the original I
also swapped the order of the convert_in_user arguments so that they
matched copy_in_user. It was hard to review otherwise. I also replaced
the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function.

Fixes: 6b5a9492ca ("v4l: introduce string control support.")

Signed-off-by: Daniel Mentz <danielmentz@google.com>
Co-developed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |  752 ++++++++++++++++----------
 1 file changed, 487 insertions(+), 265 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -22,6 +22,14 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-ioctl.h>
 
+/* Use the same argument order as copy_in_user */
+#define assign_in_user(to, from)					\
+({									\
+	typeof(*from) __assign_tmp;					\
+									\
+	get_user(__assign_tmp, from) || put_user(__assign_tmp, to);	\
+})
+
 static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret = -ENOIOCTLCMD;
@@ -35,12 +43,12 @@ static long native_ioctl(struct file *fi
 
 struct v4l2_clip32 {
 	struct v4l2_rect        c;
-	compat_caddr_t 		next;
+	compat_caddr_t		next;
 };
 
 struct v4l2_window32 {
 	struct v4l2_rect        w;
-	__u32		  	field;	/* enum v4l2_field */
+	__u32			field;	/* enum v4l2_field */
 	__u32			chromakey;
 	compat_caddr_t		clips; /* actually struct v4l2_clip32 * */
 	__u32			clipcount;
@@ -48,37 +56,41 @@ struct v4l2_window32 {
 	__u8                    global_alpha;
 };
 
-static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
+static int get_v4l2_window32(struct v4l2_window __user *kp,
+			     struct v4l2_window32 __user *up,
+			     void __user *aux_buf, u32 aux_space)
 {
 	struct v4l2_clip32 __user *uclips;
 	struct v4l2_clip __user *kclips;
 	compat_caddr_t p;
-	u32 n;
+	u32 clipcount;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
-	    get_user(kp->field, &up->field) ||
-	    get_user(kp->chromakey, &up->chromakey) ||
-	    get_user(kp->clipcount, &up->clipcount) ||
-	    get_user(kp->global_alpha, &up->global_alpha))
+	    copy_in_user(&kp->w, &up->w, sizeof(up->w)) ||
+	    assign_in_user(&kp->field, &up->field) ||
+	    assign_in_user(&kp->chromakey, &up->chromakey) ||
+	    assign_in_user(&kp->global_alpha, &up->global_alpha) ||
+	    get_user(clipcount, &up->clipcount) ||
+	    put_user(clipcount, &kp->clipcount))
 		return -EFAULT;
-	if (kp->clipcount > 2048)
+	if (clipcount > 2048)
 		return -EINVAL;
-	if (!kp->clipcount) {
-		kp->clips = NULL;
-		return 0;
-	}
+	if (!clipcount)
+		return put_user(NULL, &kp->clips);
 
-	n = kp->clipcount;
 	if (get_user(p, &up->clips))
 		return -EFAULT;
 	uclips = compat_ptr(p);
-	kclips = compat_alloc_user_space(n * sizeof(*kclips));
-	kp->clips = kclips;
-	while (n--) {
+	if (aux_space < clipcount * sizeof(*kclips))
+		return -EFAULT;
+	kclips = aux_buf;
+	if (put_user(kclips, &kp->clips))
+		return -EFAULT;
+
+	while (clipcount--) {
 		if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
 			return -EFAULT;
-		if (put_user(n ? kclips + 1 : NULL, &kclips->next))
+		if (put_user(clipcount ? kclips + 1 : NULL, &kclips->next))
 			return -EFAULT;
 		uclips++;
 		kclips++;
@@ -86,27 +98,28 @@ static int get_v4l2_window32(struct v4l2
 	return 0;
 }
 
-static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
+static int put_v4l2_window32(struct v4l2_window __user *kp,
+			     struct v4l2_window32 __user *up)
 {
 	struct v4l2_clip __user *kclips = kp->clips;
 	struct v4l2_clip32 __user *uclips;
-	u32 n = kp->clipcount;
 	compat_caddr_t p;
+	u32 clipcount;
 
-	if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
-	    put_user(kp->field, &up->field) ||
-	    put_user(kp->chromakey, &up->chromakey) ||
-	    put_user(kp->clipcount, &up->clipcount) ||
-	    put_user(kp->global_alpha, &up->global_alpha))
+	if (copy_in_user(&up->w, &kp->w, sizeof(kp->w)) ||
+	    assign_in_user(&up->field, &kp->field) ||
+	    assign_in_user(&up->chromakey, &kp->chromakey) ||
+	    assign_in_user(&up->global_alpha, &kp->global_alpha) ||
+	    get_user(clipcount, &kp->clipcount) ||
+	    put_user(clipcount, &up->clipcount))
 		return -EFAULT;
-
-	if (!kp->clipcount)
+	if (!clipcount)
 		return 0;
 
 	if (get_user(p, &up->clips))
 		return -EFAULT;
 	uclips = compat_ptr(p);
-	while (n--) {
+	while (clipcount--) {
 		if (copy_in_user(&uclips->c, &kclips->c, sizeof(uclips->c)))
 			return -EFAULT;
 		uclips++;
@@ -145,101 +158,158 @@ struct v4l2_create_buffers32 {
 	__u32			reserved[8];
 };
 
-static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int __bufsize_v4l2_format(struct v4l2_format32 __user *up, u32 *size)
+{
+	u32 type;
+
+	if (get_user(type, &up->type))
+		return -EFAULT;
+
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: {
+		u32 clipcount;
+
+		if (get_user(clipcount, &up->fmt.win.clipcount))
+			return -EFAULT;
+		if (clipcount > 2048)
+			return -EINVAL;
+		*size = clipcount * sizeof(struct v4l2_clip);
+		return 0;
+	}
+	default:
+		*size = 0;
+		return 0;
+	}
+}
+
+static int bufsize_v4l2_format(struct v4l2_format32 __user *up, u32 *size)
 {
-	if (get_user(kp->type, &up->type))
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)))
 		return -EFAULT;
+	return __bufsize_v4l2_format(up, size);
+}
 
-	switch (kp->type) {
+static int __get_v4l2_format32(struct v4l2_format __user *kp,
+			       struct v4l2_format32 __user *up,
+			       void __user *aux_buf, u32 aux_space)
+{
+	u32 type;
+
+	if (get_user(type, &up->type) || put_user(type, &kp->type))
+		return -EFAULT;
+
+	switch (type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return copy_from_user(&kp->fmt.pix, &up->fmt.pix,
-				      sizeof(kp->fmt.pix)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.pix, &up->fmt.pix,
+				    sizeof(kp->fmt.pix)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return copy_from_user(&kp->fmt.pix_mp, &up->fmt.pix_mp,
-				      sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.pix_mp, &up->fmt.pix_mp,
+				    sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-		return get_v4l2_window32(&kp->fmt.win, &up->fmt.win);
+		return get_v4l2_window32(&kp->fmt.win, &up->fmt.win,
+					 aux_buf, aux_space);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		return copy_from_user(&kp->fmt.vbi, &up->fmt.vbi,
-				      sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.vbi, &up->fmt.vbi,
+				    sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced,
-				      sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.sliced, &up->fmt.sliced,
+				    sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SDR_CAPTURE:
 	case V4L2_BUF_TYPE_SDR_OUTPUT:
-		return copy_from_user(&kp->fmt.sdr, &up->fmt.sdr,
-				      sizeof(kp->fmt.sdr)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.sdr, &up->fmt.sdr,
+				    sizeof(kp->fmt.sdr)) ? -EFAULT : 0;
 	default:
 		return -EINVAL;
 	}
 }
 
-static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int get_v4l2_format32(struct v4l2_format __user *kp,
+			     struct v4l2_format32 __user *up,
+			     void __user *aux_buf, u32 aux_space)
+{
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)))
+		return -EFAULT;
+	return __get_v4l2_format32(kp, up, aux_buf, aux_space);
+}
+
+static int bufsize_v4l2_create(struct v4l2_create_buffers32 __user *up,
+			       u32 *size)
 {
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)))
 		return -EFAULT;
-	return __get_v4l2_format32(kp, up);
+	return __bufsize_v4l2_format(&up->format, size);
 }
 
-static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
+static int get_v4l2_create32(struct v4l2_create_buffers __user *kp,
+			     struct v4l2_create_buffers32 __user *up,
+			     void __user *aux_buf, u32 aux_space)
 {
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format)))
+	    copy_in_user(kp, up,
+			 offsetof(struct v4l2_create_buffers32, format)))
 		return -EFAULT;
-	return __get_v4l2_format32(&kp->format, &up->format);
+	return __get_v4l2_format32(&kp->format, &up->format,
+				   aux_buf, aux_space);
 }
 
-static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int __put_v4l2_format32(struct v4l2_format __user *kp,
+			       struct v4l2_format32 __user *up)
 {
-	if (put_user(kp->type, &up->type))
+	u32 type;
+
+	if (get_user(type, &kp->type))
 		return -EFAULT;
 
-	switch (kp->type) {
+	switch (type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return copy_to_user(&up->fmt.pix, &kp->fmt.pix,
+		return copy_in_user(&up->fmt.pix, &kp->fmt.pix,
 				    sizeof(kp->fmt.pix)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return copy_to_user(&up->fmt.pix_mp, &kp->fmt.pix_mp,
+		return copy_in_user(&up->fmt.pix_mp, &kp->fmt.pix_mp,
 				    sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
 		return put_v4l2_window32(&kp->fmt.win, &up->fmt.win);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		return copy_to_user(&up->fmt.vbi, &kp->fmt.vbi,
+		return copy_in_user(&up->fmt.vbi, &kp->fmt.vbi,
 				    sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced,
+		return copy_in_user(&up->fmt.sliced, &kp->fmt.sliced,
 				    sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SDR_CAPTURE:
 	case V4L2_BUF_TYPE_SDR_OUTPUT:
-		return copy_to_user(&up->fmt.sdr, &kp->fmt.sdr,
+		return copy_in_user(&up->fmt.sdr, &kp->fmt.sdr,
 				    sizeof(kp->fmt.sdr)) ? -EFAULT : 0;
 	default:
 		return -EINVAL;
 	}
 }
 
-static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int put_v4l2_format32(struct v4l2_format __user *kp,
+			     struct v4l2_format32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)))
 		return -EFAULT;
 	return __put_v4l2_format32(kp, up);
 }
 
-static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
+static int put_v4l2_create32(struct v4l2_create_buffers __user *kp,
+			     struct v4l2_create_buffers32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
+	    copy_in_user(up, kp,
+			 offsetof(struct v4l2_create_buffers32, format)) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
 	return __put_v4l2_format32(&kp->format, &up->format);
 }
@@ -253,24 +323,27 @@ struct v4l2_standard32 {
 	__u32		     reserved[4];
 };
 
-static int get_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
+static int get_v4l2_standard32(struct v4l2_standard __user *kp,
+			       struct v4l2_standard32 __user *up)
 {
 	/* other fields are not set by the user, nor used by the driver */
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    get_user(kp->index, &up->index))
+	    assign_in_user(&kp->index, &up->index))
 		return -EFAULT;
 	return 0;
 }
 
-static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
+static int put_v4l2_standard32(struct v4l2_standard __user *kp,
+			       struct v4l2_standard32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->index, &up->index) ||
-	    put_user(kp->id, &up->id) ||
-	    copy_to_user(up->name, kp->name, sizeof(up->name)) ||
-	    copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) ||
-	    put_user(kp->framelines, &up->framelines) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
+	    assign_in_user(&up->index, &kp->index) ||
+	    assign_in_user(&up->id, &kp->id) ||
+	    copy_in_user(up->name, kp->name, sizeof(up->name)) ||
+	    copy_in_user(&up->frameperiod, &kp->frameperiod,
+			 sizeof(up->frameperiod)) ||
+	    assign_in_user(&up->framelines, &kp->framelines) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -310,11 +383,11 @@ struct v4l2_buffer32 {
 	__u32			reserved;
 };
 
-static int get_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
+static int get_v4l2_plane32(struct v4l2_plane __user *up,
+			    struct v4l2_plane32 __user *up32,
 			    enum v4l2_memory memory)
 {
-	void __user *up_pln;
-	compat_long_t p;
+	compat_ulong_t p;
 
 	if (copy_in_user(up, up32, 2 * sizeof(__u32)) ||
 	    copy_in_user(&up->data_offset, &up32->data_offset,
@@ -329,10 +402,8 @@ static int get_v4l2_plane32(struct v4l2_
 			return -EFAULT;
 		break;
 	case V4L2_MEMORY_USERPTR:
-		if (get_user(p, &up32->m.userptr))
-			return -EFAULT;
-		up_pln = compat_ptr(p);
-		if (put_user((unsigned long)up_pln, &up->m.userptr))
+		if (get_user(p, &up32->m.userptr) ||
+		    put_user((unsigned long)compat_ptr(p), &up->m.userptr))
 			return -EFAULT;
 		break;
 	case V4L2_MEMORY_DMABUF:
@@ -344,7 +415,8 @@ static int get_v4l2_plane32(struct v4l2_
 	return 0;
 }
 
-static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
+static int put_v4l2_plane32(struct v4l2_plane __user *up,
+			    struct v4l2_plane32 __user *up32,
 			    enum v4l2_memory memory)
 {
 	unsigned long p;
@@ -368,8 +440,7 @@ static int put_v4l2_plane32(struct v4l2_
 			return -EFAULT;
 		break;
 	case V4L2_MEMORY_DMABUF:
-		if (copy_in_user(&up32->m.fd, &up->m.fd,
-				 sizeof(up->m.fd)))
+		if (copy_in_user(&up32->m.fd, &up->m.fd, sizeof(up->m.fd)))
 			return -EFAULT;
 		break;
 	}
@@ -377,37 +448,75 @@ static int put_v4l2_plane32(struct v4l2_
 	return 0;
 }
 
-static int get_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up)
+static int bufsize_v4l2_buffer(struct v4l2_buffer32 __user *up, u32 *size)
 {
+	u32 type;
+	u32 length;
+
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
+	    get_user(type, &up->type) ||
+	    get_user(length, &up->length))
+		return -EFAULT;
+
+	if (V4L2_TYPE_IS_MULTIPLANAR(type)) {
+		if (length > VIDEO_MAX_PLANES)
+			return -EINVAL;
+
+		/*
+		 * We don't really care if userspace decides to kill itself
+		 * by passing a very big length value
+		 */
+		*size = length * sizeof(struct v4l2_plane);
+	} else {
+		*size = 0;
+	}
+	return 0;
+}
+
+static int get_v4l2_buffer32(struct v4l2_buffer __user *kp,
+			     struct v4l2_buffer32 __user *up,
+			     void __user *aux_buf, u32 aux_space)
+{
+	u32 type;
+	u32 length;
+	enum v4l2_memory memory;
 	struct v4l2_plane32 __user *uplane32;
 	struct v4l2_plane __user *uplane;
 	compat_caddr_t p;
-	int num_planes;
 	int ret;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    get_user(kp->index, &up->index) ||
-	    get_user(kp->type, &up->type) ||
-	    get_user(kp->flags, &up->flags) ||
-	    get_user(kp->memory, &up->memory) ||
-	    get_user(kp->length, &up->length))
-		return -EFAULT;
-
-	if (V4L2_TYPE_IS_OUTPUT(kp->type))
-		if (get_user(kp->bytesused, &up->bytesused) ||
-		    get_user(kp->field, &up->field) ||
-		    get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-		    get_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec))
+	    assign_in_user(&kp->index, &up->index) ||
+	    get_user(type, &up->type) ||
+	    put_user(type, &kp->type) ||
+	    assign_in_user(&kp->flags, &up->flags) ||
+	    get_user(memory, &up->memory) ||
+	    put_user(memory, &kp->memory) ||
+	    get_user(length, &up->length) ||
+	    put_user(length, &kp->length))
+		return -EFAULT;
+
+	if (V4L2_TYPE_IS_OUTPUT(type))
+		if (assign_in_user(&kp->bytesused, &up->bytesused) ||
+		    assign_in_user(&kp->field, &up->field) ||
+		    assign_in_user(&kp->timestamp.tv_sec,
+				   &up->timestamp.tv_sec) ||
+		    assign_in_user(&kp->timestamp.tv_usec,
+				   &up->timestamp.tv_usec))
 			return -EFAULT;
 
-	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
-		num_planes = kp->length;
+	if (V4L2_TYPE_IS_MULTIPLANAR(type)) {
+		u32 num_planes = length;
+
 		if (num_planes == 0) {
-			kp->m.planes = NULL;
-			/* num_planes == 0 is legal, e.g. when userspace doesn't
-			 * need planes array on DQBUF*/
-			return 0;
+			/*
+			 * num_planes == 0 is legal, e.g. when userspace doesn't
+			 * need planes array on DQBUF
+			 */
+			return put_user(NULL, &kp->m.planes);
 		}
+		if (num_planes > VIDEO_MAX_PLANES)
+			return -EINVAL;
 
 		if (get_user(p, &up->m.planes))
 			return -EFAULT;
@@ -417,37 +526,43 @@ static int get_v4l2_buffer32(struct v4l2
 			       num_planes * sizeof(*uplane32)))
 			return -EFAULT;
 
-		/* We don't really care if userspace decides to kill itself
-		 * by passing a very big num_planes value */
-		uplane = compat_alloc_user_space(num_planes * sizeof(*uplane));
-		kp->m.planes = (__force struct v4l2_plane *)uplane;
+		/*
+		 * We don't really care if userspace decides to kill itself
+		 * by passing a very big num_planes value
+		 */
+		if (aux_space < num_planes * sizeof(*uplane))
+			return -EFAULT;
+
+		uplane = aux_buf;
+		if (put_user((__force struct v4l2_plane *)uplane,
+			     &kp->m.planes))
+			return -EFAULT;
 
-		while (--num_planes >= 0) {
-			ret = get_v4l2_plane32(uplane, uplane32, kp->memory);
+		while (num_planes--) {
+			ret = get_v4l2_plane32(uplane, uplane32, memory);
 			if (ret)
 				return ret;
-			++uplane;
-			++uplane32;
+			uplane++;
+			uplane32++;
 		}
 	} else {
-		switch (kp->memory) {
+		switch (memory) {
 		case V4L2_MEMORY_MMAP:
 		case V4L2_MEMORY_OVERLAY:
-			if (get_user(kp->m.offset, &up->m.offset))
+			if (assign_in_user(&kp->m.offset, &up->m.offset))
 				return -EFAULT;
 			break;
-		case V4L2_MEMORY_USERPTR:
-			{
-				compat_long_t tmp;
-
-				if (get_user(tmp, &up->m.userptr))
-					return -EFAULT;
+		case V4L2_MEMORY_USERPTR: {
+			compat_ulong_t userptr;
 
-				kp->m.userptr = (unsigned long)compat_ptr(tmp);
-			}
+			if (get_user(userptr, &up->m.userptr) ||
+			    put_user((unsigned long)compat_ptr(userptr),
+				     &kp->m.userptr))
+				return -EFAULT;
 			break;
+		}
 		case V4L2_MEMORY_DMABUF:
-			if (get_user(kp->m.fd, &up->m.fd))
+			if (assign_in_user(&kp->m.fd, &up->m.fd))
 				return -EFAULT;
 			break;
 		}
@@ -456,62 +571,70 @@ static int get_v4l2_buffer32(struct v4l2
 	return 0;
 }
 
-static int put_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up)
+static int put_v4l2_buffer32(struct v4l2_buffer __user *kp,
+			     struct v4l2_buffer32 __user *up)
 {
+	u32 type;
+	u32 length;
+	enum v4l2_memory memory;
 	struct v4l2_plane32 __user *uplane32;
 	struct v4l2_plane __user *uplane;
 	compat_caddr_t p;
-	int num_planes;
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->index, &up->index) ||
-	    put_user(kp->type, &up->type) ||
-	    put_user(kp->flags, &up->flags) ||
-	    put_user(kp->memory, &up->memory))
-		return -EFAULT;
-
-	if (put_user(kp->bytesused, &up->bytesused) ||
-	    put_user(kp->field, &up->field) ||
-	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-	    put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) ||
-	    copy_to_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) ||
-	    put_user(kp->sequence, &up->sequence) ||
-	    put_user(kp->reserved2, &up->reserved2) ||
-	    put_user(kp->reserved, &up->reserved) ||
-	    put_user(kp->length, &up->length))
+	    assign_in_user(&up->index, &kp->index) ||
+	    get_user(type, &kp->type) ||
+	    put_user(type, &up->type) ||
+	    assign_in_user(&up->flags, &kp->flags) ||
+	    get_user(memory, &kp->memory) ||
+	    put_user(memory, &up->memory))
+		return -EFAULT;
+
+	if (assign_in_user(&up->bytesused, &kp->bytesused) ||
+	    assign_in_user(&up->field, &kp->field) ||
+	    assign_in_user(&up->timestamp.tv_sec, &kp->timestamp.tv_sec) ||
+	    assign_in_user(&up->timestamp.tv_usec, &kp->timestamp.tv_usec) ||
+	    copy_in_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) ||
+	    assign_in_user(&up->sequence, &kp->sequence) ||
+	    assign_in_user(&up->reserved2, &kp->reserved2) ||
+	    assign_in_user(&up->reserved, &kp->reserved) ||
+	    get_user(length, &kp->length) ||
+	    put_user(length, &up->length))
 		return -EFAULT;
 
-	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
-		num_planes = kp->length;
+	if (V4L2_TYPE_IS_MULTIPLANAR(type)) {
+		u32 num_planes = length;
+
 		if (num_planes == 0)
 			return 0;
 
-		uplane = (__force struct v4l2_plane __user *)kp->m.planes;
+		if (get_user(uplane, ((__force struct v4l2_plane __user **)&kp->m.planes)))
+			return -EFAULT;
 		if (get_user(p, &up->m.planes))
 			return -EFAULT;
 		uplane32 = compat_ptr(p);
 
-		while (--num_planes >= 0) {
-			ret = put_v4l2_plane32(uplane, uplane32, kp->memory);
+		while (num_planes--) {
+			ret = put_v4l2_plane32(uplane, uplane32, memory);
 			if (ret)
 				return ret;
 			++uplane;
 			++uplane32;
 		}
 	} else {
-		switch (kp->memory) {
+		switch (memory) {
 		case V4L2_MEMORY_MMAP:
 		case V4L2_MEMORY_OVERLAY:
-			if (put_user(kp->m.offset, &up->m.offset))
+			if (assign_in_user(&up->m.offset, &kp->m.offset))
 				return -EFAULT;
 			break;
 		case V4L2_MEMORY_USERPTR:
-			if (put_user(kp->m.userptr, &up->m.userptr))
+			if (assign_in_user(&up->m.userptr, &kp->m.userptr))
 				return -EFAULT;
 			break;
 		case V4L2_MEMORY_DMABUF:
-			if (put_user(kp->m.fd, &up->m.fd))
+			if (assign_in_user(&up->m.fd, &kp->m.fd))
 				return -EFAULT;
 			break;
 		}
@@ -523,7 +646,7 @@ static int put_v4l2_buffer32(struct v4l2
 struct v4l2_framebuffer32 {
 	__u32			capability;
 	__u32			flags;
-	compat_caddr_t 		base;
+	compat_caddr_t		base;
 	struct {
 		__u32		width;
 		__u32		height;
@@ -536,29 +659,32 @@ struct v4l2_framebuffer32 {
 	} fmt;
 };
 
-static int get_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_framebuffer32 __user *up)
+static int get_v4l2_framebuffer32(struct v4l2_framebuffer __user *kp,
+				  struct v4l2_framebuffer32 __user *up)
 {
-	u32 tmp;
+	compat_caddr_t tmp;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(tmp, &up->base) ||
-	    get_user(kp->capability, &up->capability) ||
-	    get_user(kp->flags, &up->flags) ||
-	    copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt)))
+	    put_user((__force void *)compat_ptr(tmp), &kp->base) ||
+	    assign_in_user(&kp->capability, &up->capability) ||
+	    assign_in_user(&kp->flags, &up->flags) ||
+	    copy_in_user(&kp->fmt, &up->fmt, sizeof(kp->fmt)))
 		return -EFAULT;
-	kp->base = (__force void *)compat_ptr(tmp);
 	return 0;
 }
 
-static int put_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_framebuffer32 __user *up)
+static int put_v4l2_framebuffer32(struct v4l2_framebuffer __user *kp,
+				  struct v4l2_framebuffer32 __user *up)
 {
-	u32 tmp = (u32)((unsigned long)kp->base);
+	void *base;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(tmp, &up->base) ||
-	    put_user(kp->capability, &up->capability) ||
-	    put_user(kp->flags, &up->flags) ||
-	    copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt)))
+	    get_user(base, &kp->base) ||
+	    put_user(ptr_to_compat(base), &up->base) ||
+	    assign_in_user(&up->capability, &kp->capability) ||
+	    assign_in_user(&up->flags, &kp->flags) ||
+	    copy_in_user(&up->fmt, &kp->fmt, sizeof(kp->fmt)))
 		return -EFAULT;
 	return 0;
 }
@@ -571,21 +697,26 @@ struct v4l2_input32 {
 	__u32        tuner;             /*  Associated tuner */
 	compat_u64   std;
 	__u32	     status;
-	__u32	     reserved[4];
+	__u32	     capabilities;
+	__u32	     reserved[3];
 };
 
-/* The 64-bit v4l2_input struct has extra padding at the end of the struct.
-   Otherwise it is identical to the 32-bit version. */
-static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up)
+/*
+ * The 64-bit v4l2_input struct has extra padding at the end of the struct.
+ * Otherwise it is identical to the 32-bit version.
+ */
+static inline int get_v4l2_input32(struct v4l2_input __user *kp,
+				   struct v4l2_input32 __user *up)
 {
-	if (copy_from_user(kp, up, sizeof(*up)))
+	if (copy_in_user(kp, up, sizeof(*up)))
 		return -EFAULT;
 	return 0;
 }
 
-static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up)
+static inline int put_v4l2_input32(struct v4l2_input __user *kp,
+				   struct v4l2_input32 __user *up)
 {
-	if (copy_to_user(up, kp, sizeof(*up)))
+	if (copy_in_user(up, kp, sizeof(*up)))
 		return -EFAULT;
 	return 0;
 }
@@ -639,40 +770,64 @@ static inline bool ctrl_is_pointer(struc
 		(qec.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD);
 }
 
+static int bufsize_v4l2_ext_controls(struct v4l2_ext_controls32 __user *up,
+				     u32 *size)
+{
+	u32 count;
+
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
+	    get_user(count, &up->count))
+		return -EFAULT;
+	if (count > V4L2_CID_MAX_CTRLS)
+		return -EINVAL;
+	*size = count * sizeof(struct v4l2_ext_control);
+	return 0;
+}
+
 static int get_v4l2_ext_controls32(struct file *file,
-				   struct v4l2_ext_controls *kp,
-				   struct v4l2_ext_controls32 __user *up)
+				   struct v4l2_ext_controls __user *kp,
+				   struct v4l2_ext_controls32 __user *up,
+				   void __user *aux_buf, u32 aux_space)
 {
 	struct v4l2_ext_control32 __user *ucontrols;
 	struct v4l2_ext_control __user *kcontrols;
-	int n;
+	u32 count;
+	u32 n;
 	compat_caddr_t p;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    get_user(kp->which, &up->which) ||
-	    get_user(kp->count, &up->count) ||
-	    get_user(kp->error_idx, &up->error_idx) ||
-	    copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
-		return -EFAULT;
-	n = kp->count;
-	if (n == 0) {
-		kp->controls = NULL;
-		return 0;
-	}
+	    assign_in_user(&kp->which, &up->which) ||
+	    get_user(count, &up->count) ||
+	    put_user(count, &kp->count) ||
+	    assign_in_user(&kp->error_idx, &up->error_idx) ||
+	    copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
+		return -EFAULT;
+
+	if (count == 0)
+		return put_user(NULL, &kp->controls);
+	if (count > V4L2_CID_MAX_CTRLS)
+		return -EINVAL;
 	if (get_user(p, &up->controls))
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
-	if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(*ucontrols)))
+	if (!access_ok(VERIFY_READ, ucontrols, count * sizeof(*ucontrols)))
+		return -EFAULT;
+	if (aux_space < count * sizeof(*kcontrols))
 		return -EFAULT;
-	kcontrols = compat_alloc_user_space(n * sizeof(*kcontrols));
-	kp->controls = (__force struct v4l2_ext_control *)kcontrols;
-	while (--n >= 0) {
+	kcontrols = aux_buf;
+	if (put_user((__force struct v4l2_ext_control *)kcontrols,
+		     &kp->controls))
+		return -EFAULT;
+
+	for (n = 0; n < count; n++) {
 		u32 id;
 
 		if (copy_in_user(kcontrols, ucontrols, sizeof(*ucontrols)))
 			return -EFAULT;
+
 		if (get_user(id, &kcontrols->id))
 			return -EFAULT;
+
 		if (ctrl_is_pointer(file, id)) {
 			void __user *s;
 
@@ -689,43 +844,54 @@ static int get_v4l2_ext_controls32(struc
 }
 
 static int put_v4l2_ext_controls32(struct file *file,
-				   struct v4l2_ext_controls *kp,
+				   struct v4l2_ext_controls __user *kp,
 				   struct v4l2_ext_controls32 __user *up)
 {
 	struct v4l2_ext_control32 __user *ucontrols;
-	struct v4l2_ext_control __user *kcontrols =
-		(__force struct v4l2_ext_control __user *)kp->controls;
-	int n = kp->count;
+	struct v4l2_ext_control __user *kcontrols;
+	u32 count;
+	u32 n;
 	compat_caddr_t p;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->which, &up->which) ||
-	    put_user(kp->count, &up->count) ||
-	    put_user(kp->error_idx, &up->error_idx) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
+	    assign_in_user(&up->which, &kp->which) ||
+	    get_user(count, &kp->count) ||
+	    put_user(count, &up->count) ||
+	    assign_in_user(&up->error_idx, &kp->error_idx) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)) ||
+	    get_user(kcontrols, &kp->controls))
 		return -EFAULT;
-	if (!kp->count)
-		return 0;
 
+	if (!count)
+		return 0;
 	if (get_user(p, &up->controls))
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
-	if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(*ucontrols)))
+	if (!access_ok(VERIFY_WRITE, ucontrols, count * sizeof(*ucontrols)))
 		return -EFAULT;
 
-	while (--n >= 0) {
-		unsigned size = sizeof(*ucontrols);
+	for (n = 0; n < count; n++) {
+		unsigned int size = sizeof(*ucontrols);
 		u32 id;
 
-		if (get_user(id, &kcontrols->id))
+		if (get_user(id, &kcontrols->id) ||
+		    put_user(id, &ucontrols->id) ||
+		    assign_in_user(&ucontrols->size, &kcontrols->size) ||
+		    copy_in_user(&ucontrols->reserved2, &kcontrols->reserved2,
+				 sizeof(ucontrols->reserved2)))
 			return -EFAULT;
-		/* Do not modify the pointer when copying a pointer control.
-		   The contents of the pointer was changed, not the pointer
-		   itself. */
+
+		/*
+		 * Do not modify the pointer when copying a pointer control.
+		 * The contents of the pointer was changed, not the pointer
+		 * itself.
+		 */
 		if (ctrl_is_pointer(file, id))
 			size -= sizeof(ucontrols->value64);
+
 		if (copy_in_user(ucontrols, kcontrols, size))
 			return -EFAULT;
+
 		ucontrols++;
 		kcontrols++;
 	}
@@ -745,17 +911,18 @@ struct v4l2_event32 {
 	__u32				reserved[8];
 };
 
-static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up)
+static int put_v4l2_event32(struct v4l2_event __user *kp,
+			    struct v4l2_event32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->type, &up->type) ||
-	    copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
-	    put_user(kp->pending, &up->pending) ||
-	    put_user(kp->sequence, &up->sequence) ||
-	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-	    put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
-	    put_user(kp->id, &up->id) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
+	    assign_in_user(&up->type, &kp->type) ||
+	    copy_in_user(&up->u, &kp->u, sizeof(kp->u)) ||
+	    assign_in_user(&up->pending, &kp->pending) ||
+	    assign_in_user(&up->sequence, &kp->sequence) ||
+	    assign_in_user(&up->timestamp.tv_sec, &kp->timestamp.tv_sec) ||
+	    assign_in_user(&up->timestamp.tv_nsec, &kp->timestamp.tv_nsec) ||
+	    assign_in_user(&up->id, &kp->id) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -768,31 +935,34 @@ struct v4l2_edid32 {
 	compat_caddr_t edid;
 };
 
-static int get_v4l2_edid32(struct v4l2_edid *kp, struct v4l2_edid32 __user *up)
+static int get_v4l2_edid32(struct v4l2_edid __user *kp,
+			   struct v4l2_edid32 __user *up)
 {
-	u32 tmp;
+	compat_uptr_t tmp;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    get_user(kp->pad, &up->pad) ||
-	    get_user(kp->start_block, &up->start_block) ||
-	    get_user(kp->blocks, &up->blocks) ||
+	    assign_in_user(&kp->pad, &up->pad) ||
+	    assign_in_user(&kp->start_block, &up->start_block) ||
+	    assign_in_user(&kp->blocks, &up->blocks) ||
 	    get_user(tmp, &up->edid) ||
-	    copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
+	    put_user(compat_ptr(tmp), &kp->edid) ||
+	    copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
-	kp->edid = (__force u8 *)compat_ptr(tmp);
 	return 0;
 }
 
-static int put_v4l2_edid32(struct v4l2_edid *kp, struct v4l2_edid32 __user *up)
+static int put_v4l2_edid32(struct v4l2_edid __user *kp,
+			   struct v4l2_edid32 __user *up)
 {
-	u32 tmp = (u32)((unsigned long)kp->edid);
+	void *edid;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->pad, &up->pad) ||
-	    put_user(kp->start_block, &up->start_block) ||
-	    put_user(kp->blocks, &up->blocks) ||
-	    put_user(tmp, &up->edid) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
+	    assign_in_user(&up->pad, &kp->pad) ||
+	    assign_in_user(&up->start_block, &kp->start_block) ||
+	    assign_in_user(&up->blocks, &kp->blocks) ||
+	    get_user(edid, &kp->edid) ||
+	    put_user(ptr_to_compat(edid), &up->edid) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -809,7 +979,7 @@ static int put_v4l2_edid32(struct v4l2_e
 #define VIDIOC_ENUMINPUT32	_IOWR('V', 26, struct v4l2_input32)
 #define VIDIOC_G_EDID32		_IOWR('V', 40, struct v4l2_edid32)
 #define VIDIOC_S_EDID32		_IOWR('V', 41, struct v4l2_edid32)
-#define VIDIOC_TRY_FMT32      	_IOWR('V', 64, struct v4l2_format32)
+#define VIDIOC_TRY_FMT32	_IOWR('V', 64, struct v4l2_format32)
 #define VIDIOC_G_EXT_CTRLS32    _IOWR('V', 71, struct v4l2_ext_controls32)
 #define VIDIOC_S_EXT_CTRLS32    _IOWR('V', 72, struct v4l2_ext_controls32)
 #define VIDIOC_TRY_EXT_CTRLS32  _IOWR('V', 73, struct v4l2_ext_controls32)
@@ -825,22 +995,23 @@ static int put_v4l2_edid32(struct v4l2_e
 #define VIDIOC_G_OUTPUT32	_IOR ('V', 46, s32)
 #define VIDIOC_S_OUTPUT32	_IOWR('V', 47, s32)
 
+static int alloc_userspace(unsigned int size, u32 aux_space,
+			   void __user **up_native)
+{
+	*up_native = compat_alloc_user_space(size + aux_space);
+	if (!*up_native)
+		return -ENOMEM;
+	if (clear_user(*up_native, size))
+		return -EFAULT;
+	return 0;
+}
+
 static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	union {
-		struct v4l2_format v2f;
-		struct v4l2_buffer v2b;
-		struct v4l2_framebuffer v2fb;
-		struct v4l2_input v2i;
-		struct v4l2_standard v2s;
-		struct v4l2_ext_controls v2ecs;
-		struct v4l2_event v2ev;
-		struct v4l2_create_buffers v2crt;
-		struct v4l2_edid v2edid;
-		unsigned long vx;
-		int vi;
-	} karg;
 	void __user *up = compat_ptr(arg);
+	void __user *up_native = NULL;
+	void __user *aux_buf;
+	u32 aux_space;
 	int compatible_arg = 1;
 	long err = 0;
 
@@ -879,30 +1050,52 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_STREAMOFF:
 	case VIDIOC_S_INPUT:
 	case VIDIOC_S_OUTPUT:
-		err = get_user(karg.vi, (s32 __user *)up);
+		err = alloc_userspace(sizeof(unsigned int), 0, &up_native);
+		if (!err && assign_in_user((unsigned int __user *)up_native,
+					   (compat_uint_t __user *)up))
+			err = -EFAULT;
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_INPUT:
 	case VIDIOC_G_OUTPUT:
+		err = alloc_userspace(sizeof(unsigned int), 0, &up_native);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_EDID:
 	case VIDIOC_S_EDID:
-		err = get_v4l2_edid32(&karg.v2edid, up);
+		err = alloc_userspace(sizeof(struct v4l2_edid), 0, &up_native);
+		if (!err)
+			err = get_v4l2_edid32(up_native, up);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_FMT:
 	case VIDIOC_S_FMT:
 	case VIDIOC_TRY_FMT:
-		err = get_v4l2_format32(&karg.v2f, up);
+		err = bufsize_v4l2_format(up, &aux_space);
+		if (!err)
+			err = alloc_userspace(sizeof(struct v4l2_format),
+					      aux_space, &up_native);
+		if (!err) {
+			aux_buf = up_native + sizeof(struct v4l2_format);
+			err = get_v4l2_format32(up_native, up,
+						aux_buf, aux_space);
+		}
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_CREATE_BUFS:
-		err = get_v4l2_create32(&karg.v2crt, up);
+		err = bufsize_v4l2_create(up, &aux_space);
+		if (!err)
+			err = alloc_userspace(sizeof(struct v4l2_create_buffers),
+					      aux_space, &up_native);
+		if (!err) {
+			aux_buf = up_native + sizeof(struct v4l2_create_buffers);
+			err = get_v4l2_create32(up_native, up,
+						aux_buf, aux_space);
+		}
 		compatible_arg = 0;
 		break;
 
@@ -910,36 +1103,63 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_QUERYBUF:
 	case VIDIOC_QBUF:
 	case VIDIOC_DQBUF:
-		err = get_v4l2_buffer32(&karg.v2b, up);
+		err = bufsize_v4l2_buffer(up, &aux_space);
+		if (!err)
+			err = alloc_userspace(sizeof(struct v4l2_buffer),
+					      aux_space, &up_native);
+		if (!err) {
+			aux_buf = up_native + sizeof(struct v4l2_buffer);
+			err = get_v4l2_buffer32(up_native, up,
+						aux_buf, aux_space);
+		}
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_S_FBUF:
-		err = get_v4l2_framebuffer32(&karg.v2fb, up);
+		err = alloc_userspace(sizeof(struct v4l2_framebuffer), 0,
+				      &up_native);
+		if (!err)
+			err = get_v4l2_framebuffer32(up_native, up);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_FBUF:
+		err = alloc_userspace(sizeof(struct v4l2_framebuffer), 0,
+				      &up_native);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_ENUMSTD:
-		err = get_v4l2_standard32(&karg.v2s, up);
+		err = alloc_userspace(sizeof(struct v4l2_standard), 0,
+				      &up_native);
+		if (!err)
+			err = get_v4l2_standard32(up_native, up);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_ENUMINPUT:
-		err = get_v4l2_input32(&karg.v2i, up);
+		err = alloc_userspace(sizeof(struct v4l2_input), 0, &up_native);
+		if (!err)
+			err = get_v4l2_input32(up_native, up);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_EXT_CTRLS:
 	case VIDIOC_S_EXT_CTRLS:
 	case VIDIOC_TRY_EXT_CTRLS:
-		err = get_v4l2_ext_controls32(file, &karg.v2ecs, up);
+		err = bufsize_v4l2_ext_controls(up, &aux_space);
+		if (!err)
+			err = alloc_userspace(sizeof(struct v4l2_ext_controls),
+					      aux_space, &up_native);
+		if (!err) {
+			aux_buf = up_native + sizeof(struct v4l2_ext_controls);
+			err = get_v4l2_ext_controls32(file, up_native, up,
+						      aux_buf, aux_space);
+		}
 		compatible_arg = 0;
 		break;
 	case VIDIOC_DQEVENT:
+		err = alloc_userspace(sizeof(struct v4l2_event), 0, &up_native);
 		compatible_arg = 0;
 		break;
 	}
@@ -948,25 +1168,26 @@ static long do_video_ioctl(struct file *
 
 	if (compatible_arg)
 		err = native_ioctl(file, cmd, (unsigned long)up);
-	else {
-		mm_segment_t old_fs = get_fs();
-
-		set_fs(KERNEL_DS);
-		err = native_ioctl(file, cmd, (unsigned long)&karg);
-		set_fs(old_fs);
-	}
+	else
+		err = native_ioctl(file, cmd, (unsigned long)up_native);
 
 	if (err == -ENOTTY)
 		return err;
 
-	/* Special case: even after an error we need to put the
-	   results back for these ioctls since the error_idx will
-	   contain information on which control failed. */
+	/*
+	 * Special case: even after an error we need to put the
+	 * results back for these ioctls since the error_idx will
+	 * contain information on which control failed.
+	 */
 	switch (cmd) {
 	case VIDIOC_G_EXT_CTRLS:
 	case VIDIOC_S_EXT_CTRLS:
 	case VIDIOC_TRY_EXT_CTRLS:
-		if (put_v4l2_ext_controls32(file, &karg.v2ecs, up))
+		if (put_v4l2_ext_controls32(file, up_native, up))
+			err = -EFAULT;
+		break;
+	case VIDIOC_S_EDID:
+		if (put_v4l2_edid32(up_native, up))
 			err = -EFAULT;
 		break;
 	}
@@ -978,45 +1199,46 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_S_OUTPUT:
 	case VIDIOC_G_INPUT:
 	case VIDIOC_G_OUTPUT:
-		err = put_user(((s32)karg.vi), (s32 __user *)up);
+		if (assign_in_user((compat_uint_t __user *)up,
+				   ((unsigned int __user *)up_native)))
+			err = -EFAULT;
 		break;
 
 	case VIDIOC_G_FBUF:
-		err = put_v4l2_framebuffer32(&karg.v2fb, up);
+		err = put_v4l2_framebuffer32(up_native, up);
 		break;
 
 	case VIDIOC_DQEVENT:
-		err = put_v4l2_event32(&karg.v2ev, up);
+		err = put_v4l2_event32(up_native, up);
 		break;
 
 	case VIDIOC_G_EDID:
-	case VIDIOC_S_EDID:
-		err = put_v4l2_edid32(&karg.v2edid, up);
+		err = put_v4l2_edid32(up_native, up);
 		break;
 
 	case VIDIOC_G_FMT:
 	case VIDIOC_S_FMT:
 	case VIDIOC_TRY_FMT:
-		err = put_v4l2_format32(&karg.v2f, up);
+		err = put_v4l2_format32(up_native, up);
 		break;
 
 	case VIDIOC_CREATE_BUFS:
-		err = put_v4l2_create32(&karg.v2crt, up);
+		err = put_v4l2_create32(up_native, up);
 		break;
 
 	case VIDIOC_PREPARE_BUF:
 	case VIDIOC_QUERYBUF:
 	case VIDIOC_QBUF:
 	case VIDIOC_DQBUF:
-		err = put_v4l2_buffer32(&karg.v2b, up);
+		err = put_v4l2_buffer32(up_native, up);
 		break;
 
 	case VIDIOC_ENUMSTD:
-		err = put_v4l2_standard32(&karg.v2s, up);
+		err = put_v4l2_standard32(up_native, up);
 		break;
 
 	case VIDIOC_ENUMINPUT:
-		err = put_v4l2_input32(&karg.v2i, up);
+		err = put_v4l2_input32(up_native, up);
 		break;
 	}
 	return err;

[PATCH 4.9 49/88] crypto: caam - fix endless loop when DECO acquire fails

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Horia Geantă <horia.geanta@nxp.com>

commit 225ece3e7dad4cfc44cca38ce7a3a80f255ea8f1 upstream.

In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails
with -ENODEV, caam_probe() enters an endless loop:

run_descriptor_deco0
	ret -ENODEV
	-> instantiate_rng
		-ENODEV, overwritten by -EAGAIN
		ret -EAGAIN
		-> caam_probe
			-EAGAIN results in endless loop

It turns out the error path in instantiate_rng() is incorrect,
the checks are done in the wrong order.

Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles")
Reported-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: Auer Lukas <lukas.auer@aisec.fraunhofer.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/caam/ctrl.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -228,12 +228,16 @@ static int instantiate_rng(struct device
 		 * without any error (HW optimizations for later
 		 * CAAM eras), then try again.
 		 */
+		if (ret)
+			break;
+
 		rdsta_val = rd_reg32(&ctrl->r4tst[0].rdsta) & RDSTA_IFMASK;
 		if ((status && status != JRSTA_SSRC_JUMP_HALT_CC) ||
-		    !(rdsta_val & (1 << sh_idx)))
+		    !(rdsta_val & (1 << sh_idx))) {
 			ret = -EAGAIN;
-		if (ret)
 			break;
+		}
+
 		dev_info(ctrldev, "Instantiated RNG4 SH%d\n", sh_idx);
 		/* Clear the contents before recreating the descriptor */
 		memset(desc, 0x00, CAAM_CMD_SZ * 7);

[PATCH 4.9 50/88] crypto: sha512-mb - initialize pending lengths correctly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit eff84b379089cd8b4e83599639c1f5f6e34ef7bf upstream.

The SHA-512 multibuffer code keeps track of the number of blocks pending
in each lane.  The minimum of these values is used to identify the next
lane that will be completed.  Unused lanes are set to a large number
(0xFFFFFFFF) so that they don't affect this calculation.

However, it was forgotten to set the lengths to this value in the
initial state, where all lanes are unused.  As a result it was possible
for sha512_mb_mgr_get_comp_job_avx2() to select an unused lane, causing
a NULL pointer dereference.  Specifically this could happen in the case
where ->update() was passed fewer than SHA512_BLOCK_SIZE bytes of data,
so it then called sha_complete_job() without having actually submitted
any blocks to the multi-buffer code.  This hit a NULL pointer
dereference if another task happened to have submitted blocks
concurrently to the same CPU and the flush timer had not yet expired.

Fix this by initializing sha512_mb_mgr->lens correctly.

As usual, this bug was found by syzkaller.

Fixes: 45691e2d9b18 ("crypto: sha512-mb - submit/flush routines for AVX2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c
+++ b/arch/x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c
@@ -57,10 +57,12 @@ void sha512_mb_mgr_init_avx2(struct sha5
 {
 	unsigned int j;
 
-	state->lens[0] = 0;
-	state->lens[1] = 1;
-	state->lens[2] = 2;
-	state->lens[3] = 3;
+	/* initially all lanes are unused */
+	state->lens[0] = 0xFFFFFFFF00000000;
+	state->lens[1] = 0xFFFFFFFF00000001;
+	state->lens[2] = 0xFFFFFFFF00000002;
+	state->lens[3] = 0xFFFFFFFF00000003;
+
 	state->unused_lanes = 0xFF03020100;
 	for (j = 0; j < 4; j++)
 		state->ldata[j].job_in_lane = NULL;

[PATCH 4.9 51/88] crypto: talitos - fix Kernel Oops on hashing an empty file

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: LEROY Christophe <christophe.leroy@c-s.fr>

commit 87a81dce53b1ea61acaeefa5191a0376a2d1d721 upstream.

Performing the hash of an empty file leads to a kernel Oops

[   44.504600] Unable to handle kernel paging request for data at address 0x0000000c
[   44.512819] Faulting instruction address: 0xc02d2be8
[   44.524088] Oops: Kernel access of bad area, sig: 11 [#1]
[   44.529171] BE PREEMPT CMPC885
[   44.532232] CPU: 0 PID: 491 Comm: md5sum Not tainted 4.15.0-rc8-00211-g3a968610b6ea #81
[   44.540814] NIP:  c02d2be8 LR: c02d2984 CTR: 00000000
[   44.545812] REGS: c6813c90 TRAP: 0300   Not tainted  (4.15.0-rc8-00211-g3a968610b6ea)
[   44.554223] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 48222822  XER: 20000000
[   44.560855] DAR: 0000000c DSISR: c0000000
[   44.560855] GPR00: c02d28fc c6813d40 c6828000 c646fa40 00000001 00000001 00000001 00000000
[   44.560855] GPR08: 0000004c 00000000 c000bfcc 00000000 28222822 100280d4 00000000 10020008
[   44.560855] GPR16: 00000000 00000020 00000000 00000000 10024008 00000000 c646f9f0 c6179a10
[   44.560855] GPR24: 00000000 00000001 c62f0018 c6179a10 00000000 c6367a30 c62f0000 c646f9c0
[   44.598542] NIP [c02d2be8] ahash_process_req+0x448/0x700
[   44.603751] LR [c02d2984] ahash_process_req+0x1e4/0x700
[   44.608868] Call Trace:
[   44.611329] [c6813d40] [c02d28fc] ahash_process_req+0x15c/0x700 (unreliable)
[   44.618302] [c6813d90] [c02060c4] hash_recvmsg+0x11c/0x210
[   44.623716] [c6813db0] [c0331354] ___sys_recvmsg+0x98/0x138
[   44.629226] [c6813eb0] [c03332c0] __sys_recvmsg+0x40/0x84
[   44.634562] [c6813f10] [c03336c0] SyS_socketcall+0xb8/0x1d4
[   44.640073] [c6813f40] [c000d1ac] ret_from_syscall+0x0/0x38
[   44.645530] Instruction dump:
[   44.648465] 38c00001 7f63db78 4e800421 7c791b78 54690ffe 0f090000 80ff0190 2f870000
[   44.656122] 40befe50 2f990001 409e0210 813f01bc <8129000c> b39e003a 7d29c214 913e003c

This patch fixes that Oops by checking if src is NULL.

Fixes: 6a1e8d14156d4 ("crypto: talitos - making mapping helpers more generic")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/talitos.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1127,6 +1127,10 @@ int talitos_sg_map(struct device *dev, s
 	to_talitos_ptr_len(ptr, len, is_sec1);
 	to_talitos_ptr_ext_set(ptr, 0, is_sec1);
 
+	if (!src) {
+		to_talitos_ptr(ptr, 0, 0, is_sec1);
+		return 1;
+	}
 	if (sg_count == 1) {
 		to_talitos_ptr(ptr, sg_dma_address(src) + offset, is_sec1);
 		return sg_count;

[PATCH 4.9 52/88] arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit 20e8175d246e9f9deb377f2784b3e7dfb2ad3e86 upstream.

KVM doesn't follow the SMCCC when it comes to unimplemented calls,
and inject an UNDEF instead of returning an error. Since firmware
calls are now used for security mitigation, they are becoming more
common, and the undef is counter productive.

Instead, let's follow the SMCCC which states that -1 must be returned
to the caller when getting an unknown function number.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kvm/handle_exit.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/arch/arm/kvm/handle_exit.c
+++ b/arch/arm/kvm/handle_exit.c
@@ -38,7 +38,7 @@ static int handle_hvc(struct kvm_vcpu *v
 
 	ret = kvm_psci_call(vcpu);
 	if (ret < 0) {
-		kvm_inject_undefined(vcpu);
+		vcpu_set_reg(vcpu, 0, ~0UL);
 		return 1;
 	}
 
@@ -47,7 +47,16 @@ static int handle_hvc(struct kvm_vcpu *v
 
 static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
-	kvm_inject_undefined(vcpu);
+	/*
+	 * "If an SMC instruction executed at Non-secure EL1 is
+	 * trapped to EL2 because HCR_EL2.TSC is 1, the exception is a
+	 * Trap exception, not a Secure Monitor Call exception [...]"
+	 *
+	 * We need to advance the PC after the trap, as it would
+	 * otherwise return to the same address...
+	 */
+	vcpu_set_reg(vcpu, 0, ~0UL);
+	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
 	return 1;
 }
 

[PATCH 4.9 53/88] KVM: nVMX: Fix races when sending nested PI while dest enters/leaves L2

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liran Alon <liran.alon@oracle.com>

commit 6b6977117f50d60455ace86b2d256f6fb4f3de05 upstream.

Consider the following scenario:
1. CPU A calls vmx_deliver_nested_posted_interrupt() to send an IPI
to CPU B via virtual posted-interrupt mechanism.
2. CPU B is currently executing L2 guest.
3. vmx_deliver_nested_posted_interrupt() calls
kvm_vcpu_trigger_posted_interrupt() which will note that
vcpu->mode == IN_GUEST_MODE.
4. Assume that before CPU A sends the physical POSTED_INTR_NESTED_VECTOR
IPI, CPU B exits from L2 to L0 during event-delivery
(valid IDT-vectoring-info).
5. CPU A now sends the physical IPI. The IPI is received in host and
it's handler (smp_kvm_posted_intr_nested_ipi()) does nothing.
6. Assume that before CPU A sets pi_pending=true and KVM_REQ_EVENT,
CPU B continues to run in L0 and reach vcpu_enter_guest(). As
KVM_REQ_EVENT is not set yet, vcpu_enter_guest() will continue and resume
L2 guest.
7. At this point, CPU A sets pi_pending=true and KVM_REQ_EVENT but
it's too late! CPU B already entered L2 and KVM_REQ_EVENT will only be
consumed at next L2 entry!

Another scenario to consider:
1. CPU A calls vmx_deliver_nested_posted_interrupt() to send an IPI
to CPU B via virtual posted-interrupt mechanism.
2. Assume that before CPU A calls kvm_vcpu_trigger_posted_interrupt(),
CPU B is at L0 and is about to resume into L2. Further assume that it is
in vcpu_enter_guest() after check for KVM_REQ_EVENT.
3. At this point, CPU A calls kvm_vcpu_trigger_posted_interrupt() which
will note that vcpu->mode != IN_GUEST_MODE. Therefore, do nothing and
return false. Then, will set pi_pending=true and KVM_REQ_EVENT.
4. Now CPU B continue and resumes into L2 guest without processing
the posted-interrupt until next L2 entry!

To fix both issues, we just need to change
vmx_deliver_nested_posted_interrupt() to set pi_pending=true and
KVM_REQ_EVENT before calling kvm_vcpu_trigger_posted_interrupt().

It will fix the first scenario by chaging step (6) to note that
KVM_REQ_EVENT and pi_pending=true and therefore process
nested posted-interrupt.

It will fix the second scenario by two possible ways:
1. If kvm_vcpu_trigger_posted_interrupt() is called while CPU B has changed
vcpu->mode to IN_GUEST_MODE, physical IPI will be sent and will be received
when CPU resumes into L2.
2. If kvm_vcpu_trigger_posted_interrupt() is called while CPU B hasn't yet
changed vcpu->mode to IN_GUEST_MODE, then after CPU B will change
vcpu->mode it will call kvm_request_pending() which will return true and
therefore force another round of vcpu_enter_guest() which will note that
KVM_REQ_EVENT and pi_pending=true and therefore process nested
posted-interrupt.

Fixes: 705699a13994 ("KVM: nVMX: Enable nested posted interrupt processing")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
[Add kvm_vcpu_kick to also handle the case where L1 doesn't intercept L2 HLT
 and L2 executes HLT instruction. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/vmx.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -4967,14 +4967,15 @@ static int vmx_deliver_nested_posted_int
 
 	if (is_guest_mode(vcpu) &&
 	    vector == vmx->nested.posted_intr_nv) {
-		/* the PIR and ON have been set by L1. */
-		kvm_vcpu_trigger_posted_interrupt(vcpu);
 		/*
 		 * If a posted intr is not recognized by hardware,
 		 * we will accomplish it in the next vmentry.
 		 */
 		vmx->nested.pi_pending = true;
 		kvm_make_request(KVM_REQ_EVENT, vcpu);
+		/* the PIR and ON have been set by L1. */
+		if (!kvm_vcpu_trigger_posted_interrupt(vcpu))
+			kvm_vcpu_kick(vcpu);
 		return 0;
 	}
 	return -1;

[PATCH 4.9 54/88] KVM: arm/arm64: Handle CPU_PM_ENTER_FAILED

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Morse <james.morse@arm.com>

commit 58d6b15e9da5042a99c9c30ad725792e4569150e upstream.

cpu_pm_enter() calls the pm notifier chain with CPU_PM_ENTER, then if
there is a failure: CPU_PM_ENTER_FAILED.

When KVM receives CPU_PM_ENTER it calls cpu_hyp_reset() which will
return us to the hyp-stub. If we subsequently get a CPU_PM_ENTER_FAILED,
KVM does nothing, leaving the CPU running with the hyp-stub, at odds
with kvm_arm_hardware_enabled.

Add CPU_PM_ENTER_FAILED as a fallthrough for CPU_PM_EXIT, this reloads
KVM based on kvm_arm_hardware_enabled. This is safe even if CPU_PM_ENTER
never gets as far as KVM, as cpu_hyp_reinit() calls cpu_hyp_reset()
to make sure the hyp-stub is loaded before reloading KVM.

Fixes: 67f691976662 ("arm64: kvm: allows kvm cpu hotplug")
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kvm/arm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -1165,6 +1165,7 @@ static int hyp_init_cpu_pm_notifier(stru
 			cpu_hyp_reset();
 
 		return NOTIFY_OK;
+	case CPU_PM_ENTER_FAILED:
 	case CPU_PM_EXIT:
 		if (__this_cpu_read(kvm_arm_hardware_enabled))
 			/* The hardware was enabled before suspend. */

[PATCH 4.9 55/88] ASoC: rockchip: i2s: fix playback after runtime resume

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Keeping <john@metanate.com>

commit c66234cfedfc3e6e3b62563a5f2c1562be09a35d upstream.

When restoring registers during runtime resume, we must not write to
I2S_TXDR which is the transmit FIFO as this queues up a sample to be
output and pushes all of the output channels down by one.

This can be demonstrated with the speaker-test utility:

	for i in a b c; do speaker-test -c 2 -s 1; done

which should play a test through the left speaker three times but if the
I2S hardware starts runtime suspended the first sample will be played
through the right speaker.

Fix this by marking I2S_TXDR as volatile (which also requires marking it
as readble, even though it technically isn't).  This seems to be the
most robust fix, the alternative of giving I2S_TXDR a default value is
more fragile since it does not prevent regcache writing to the register
in all circumstances.

While here, also fix the configuration of I2S_RXDR and I2S_FIFOLR; these
are not writable so they do not suffer from the same problem as I2S_TXDR
but reading from I2S_RXDR does suffer from a similar problem.

Fixes: f0447f6cbb20 ("ASoC: rockchip: i2s: restore register during runtime_suspend/resume cycle", 2016-09-07)
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/rockchip/rockchip_i2s.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -476,6 +476,7 @@ static bool rockchip_i2s_rd_reg(struct d
 	case I2S_INTCR:
 	case I2S_XFER:
 	case I2S_CLR:
+	case I2S_TXDR:
 	case I2S_RXDR:
 	case I2S_FIFOLR:
 	case I2S_INTSR:
@@ -490,6 +491,9 @@ static bool rockchip_i2s_volatile_reg(st
 	switch (reg) {
 	case I2S_INTSR:
 	case I2S_CLR:
+	case I2S_FIFOLR:
+	case I2S_TXDR:
+	case I2S_RXDR:
 		return true;
 	default:
 		return false;
@@ -499,6 +503,8 @@ static bool rockchip_i2s_volatile_reg(st
 static bool rockchip_i2s_precious_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
+	case I2S_RXDR:
+		return true;
 	default:
 		return false;
 	}

[PATCH 4.9 56/88] ASoC: skl: Fix kernel warning due to zero NHTL entry

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 20a1ea2222e7cbf96e9bf8579362e971491e6aea upstream.

I got the following kernel warning when loading snd-soc-skl module on
Dell Latitude 7270 laptop:
 memremap attempted on mixed range 0x0000000000000000 size: 0x0
 WARNING: CPU: 0 PID: 484 at kernel/memremap.c:98 memremap+0x8a/0x180
 Call Trace:
  skl_nhlt_init+0x82/0xf0 [snd_soc_skl]
  skl_probe+0x2ee/0x7c0 [snd_soc_skl]
  ....

It seems that the machine doesn't support the SKL DSP gives the empty
NHLT entry, and it triggers the warning.  For avoiding it, let do the
zero check before calling memremap().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/intel/skylake/skl-nhlt.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/soc/intel/skylake/skl-nhlt.c
+++ b/sound/soc/intel/skylake/skl-nhlt.c
@@ -41,7 +41,8 @@ struct nhlt_acpi_table *skl_nhlt_init(st
 	obj = acpi_evaluate_dsm(handle, OSC_UUID, 1, 1, NULL);
 	if (obj && obj->type == ACPI_TYPE_BUFFER) {
 		nhlt_ptr = (struct nhlt_resource_desc  *)obj->buffer.pointer;
-		nhlt_table = (struct nhlt_acpi_table *)
+		if (nhlt_ptr->length)
+			nhlt_table = (struct nhlt_acpi_table *)
 				memremap(nhlt_ptr->min_addr, nhlt_ptr->length,
 				MEMREMAP_WB);
 		ACPI_FREE(obj);

[PATCH 4.9 57/88] watchdog: imx2_wdt: restore previous timeout after suspend+resume

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Kaiser <martin@kaiser.cx>

commit 0be267255cef64e1c58475baa7b25568355a3816 upstream.

When the watchdog device is suspended, its timeout is set to the maximum
value. During resume, the previously set timeout should be restored.
This does not work at the moment.

The suspend function calls

imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);

and resume reverts this by calling

imx2_wdt_set_timeout(wdog, wdog->timeout);

However, imx2_wdt_set_timeout() updates wdog->timeout. Therefore,
wdog->timeout is set to IMX2_WDT_MAX_TIME when we enter the resume
function.

Fix this by adding a new function __imx2_wdt_set_timeout() which
only updates the hardware settings. imx2_wdt_set_timeout() now calls
__imx2_wdt_set_timeout() and then saves the new timeout to
wdog->timeout.

During suspend, we call __imx2_wdt_set_timeout() directly so that
wdog->timeout won't be updated and we can restore the previous value
during resume. This approach makes wdog->timeout different from the
actual setting in the hardware which is usually not a good thing.
However, the two differ only while we're suspended and no kernel code is
running, so it should be ok in this case.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/watchdog/imx2_wdt.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -169,15 +169,21 @@ static int imx2_wdt_ping(struct watchdog
 	return 0;
 }
 
-static int imx2_wdt_set_timeout(struct watchdog_device *wdog,
-				unsigned int new_timeout)
+static void __imx2_wdt_set_timeout(struct watchdog_device *wdog,
+				   unsigned int new_timeout)
 {
 	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
 
-	wdog->timeout = new_timeout;
-
 	regmap_update_bits(wdev->regmap, IMX2_WDT_WCR, IMX2_WDT_WCR_WT,
 			   WDOG_SEC_TO_COUNT(new_timeout));
+}
+
+static int imx2_wdt_set_timeout(struct watchdog_device *wdog,
+				unsigned int new_timeout)
+{
+	__imx2_wdt_set_timeout(wdog, new_timeout);
+
+	wdog->timeout = new_timeout;
 	return 0;
 }
 
@@ -371,7 +377,11 @@ static int imx2_wdt_suspend(struct devic
 
 	/* The watchdog IP block is running */
 	if (imx2_wdt_is_running(wdev)) {
-		imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);
+		/*
+		 * Don't update wdog->timeout, we'll restore the current value
+		 * during resume.
+		 */
+		__imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);
 		imx2_wdt_ping(wdog);
 	}
 

[PATCH 4.9 58/88] media: dvb-frontends: fix i2c access helpers for KASAN

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 3cd890dbe2a4f14cc44c85bb6cf37e5e22d4dd0e upstream.

A typical code fragment was copied across many dvb-frontend drivers and
causes large stack frames when built with with CONFIG_KASAN on gcc-5/6/7:

drivers/media/dvb-frontends/cxd2841er.c:3225:1: error: the frame size of 3992 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/cxd2841er.c:3404:1: error: the frame size of 3136 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv0367.c:3143:1: error: the frame size of 4016 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:3430:1: error: the frame size of 5312 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:4248:1: error: the frame size of 4872 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]

gcc-8 now solves this by consolidating the stack slots for the argument
variables, but on older compilers we can get the same behavior by taking
the pointer of a local variable rather than the inline function argument.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb-frontends/ascot2e.c     |    4 +++-
 drivers/media/dvb-frontends/cxd2841er.c   |    4 +++-
 drivers/media/dvb-frontends/helene.c      |    4 +++-
 drivers/media/dvb-frontends/horus3a.c     |    4 +++-
 drivers/media/dvb-frontends/itd1000.c     |    5 +++--
 drivers/media/dvb-frontends/mt312.c       |    5 ++++-
 drivers/media/dvb-frontends/stb0899_drv.c |    3 ++-
 drivers/media/dvb-frontends/stb6100.c     |    6 ++++--
 drivers/media/dvb-frontends/stv0367.c     |    4 +++-
 drivers/media/dvb-frontends/stv090x.c     |    4 +++-
 drivers/media/dvb-frontends/stv6110x.c    |    4 +++-
 drivers/media/dvb-frontends/zl10039.c     |    4 +++-
 12 files changed, 37 insertions(+), 14 deletions(-)

--- a/drivers/media/dvb-frontends/ascot2e.c
+++ b/drivers/media/dvb-frontends/ascot2e.c
@@ -155,7 +155,9 @@ static int ascot2e_write_regs(struct asc
 
 static int ascot2e_write_reg(struct ascot2e_priv *priv, u8 reg, u8 val)
 {
-	return ascot2e_write_regs(priv, reg, &val, 1);
+	u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return ascot2e_write_regs(priv, reg, &tmp, 1);
 }
 
 static int ascot2e_read_regs(struct ascot2e_priv *priv,
--- a/drivers/media/dvb-frontends/cxd2841er.c
+++ b/drivers/media/dvb-frontends/cxd2841er.c
@@ -261,7 +261,9 @@ static int cxd2841er_write_regs(struct c
 static int cxd2841er_write_reg(struct cxd2841er_priv *priv,
 			       u8 addr, u8 reg, u8 val)
 {
-	return cxd2841er_write_regs(priv, addr, reg, &val, 1);
+	u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return cxd2841er_write_regs(priv, addr, reg, &tmp, 1);
 }
 
 static int cxd2841er_read_regs(struct cxd2841er_priv *priv,
--- a/drivers/media/dvb-frontends/helene.c
+++ b/drivers/media/dvb-frontends/helene.c
@@ -331,7 +331,9 @@ static int helene_write_regs(struct hele
 
 static int helene_write_reg(struct helene_priv *priv, u8 reg, u8 val)
 {
-	return helene_write_regs(priv, reg, &val, 1);
+	u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return helene_write_regs(priv, reg, &tmp, 1);
 }
 
 static int helene_read_regs(struct helene_priv *priv,
--- a/drivers/media/dvb-frontends/horus3a.c
+++ b/drivers/media/dvb-frontends/horus3a.c
@@ -89,7 +89,9 @@ static int horus3a_write_regs(struct hor
 
 static int horus3a_write_reg(struct horus3a_priv *priv, u8 reg, u8 val)
 {
-	return horus3a_write_regs(priv, reg, &val, 1);
+	u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return horus3a_write_regs(priv, reg, &tmp, 1);
 }
 
 static int horus3a_enter_power_save(struct horus3a_priv *priv)
--- a/drivers/media/dvb-frontends/itd1000.c
+++ b/drivers/media/dvb-frontends/itd1000.c
@@ -99,8 +99,9 @@ static int itd1000_read_reg(struct itd10
 
 static inline int itd1000_write_reg(struct itd1000_state *state, u8 r, u8 v)
 {
-	int ret = itd1000_write_regs(state, r, &v, 1);
-	state->shadow[r] = v;
+	u8 tmp = v; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+	int ret = itd1000_write_regs(state, r, &tmp, 1);
+	state->shadow[r] = tmp;
 	return ret;
 }
 
--- a/drivers/media/dvb-frontends/mt312.c
+++ b/drivers/media/dvb-frontends/mt312.c
@@ -142,7 +142,10 @@ static inline int mt312_readreg(struct m
 static inline int mt312_writereg(struct mt312_state *state,
 				 const enum mt312_reg_addr reg, const u8 val)
 {
-	return mt312_write(state, reg, &val, 1);
+	u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+
+	return mt312_write(state, reg, &tmp, 1);
 }
 
 static inline u32 mt312_div(u32 a, u32 b)
--- a/drivers/media/dvb-frontends/stb0899_drv.c
+++ b/drivers/media/dvb-frontends/stb0899_drv.c
@@ -552,7 +552,8 @@ int stb0899_write_regs(struct stb0899_st
 
 int stb0899_write_reg(struct stb0899_state *state, unsigned int reg, u8 data)
 {
-	return stb0899_write_regs(state, reg, &data, 1);
+	u8 tmp = data;
+	return stb0899_write_regs(state, reg, &tmp, 1);
 }
 
 /*
--- a/drivers/media/dvb-frontends/stb6100.c
+++ b/drivers/media/dvb-frontends/stb6100.c
@@ -226,12 +226,14 @@ static int stb6100_write_reg_range(struc
 
 static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data)
 {
+	u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
 	if (unlikely(reg >= STB6100_NUMREGS)) {
 		dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
 		return -EREMOTEIO;
 	}
-	data = (data & stb6100_template[reg].mask) | stb6100_template[reg].set;
-	return stb6100_write_reg_range(state, &data, reg, 1);
+	tmp = (tmp & stb6100_template[reg].mask) | stb6100_template[reg].set;
+	return stb6100_write_reg_range(state, &tmp, reg, 1);
 }
 
 
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -804,7 +804,9 @@ int stv0367_writeregs(struct stv0367_sta
 
 static int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
 {
-	return stv0367_writeregs(state, reg, &data, 1);
+	u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return stv0367_writeregs(state, reg, &tmp, 1);
 }
 
 static u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
--- a/drivers/media/dvb-frontends/stv090x.c
+++ b/drivers/media/dvb-frontends/stv090x.c
@@ -761,7 +761,9 @@ static int stv090x_write_regs(struct stv
 
 static int stv090x_write_reg(struct stv090x_state *state, unsigned int reg, u8 data)
 {
-	return stv090x_write_regs(state, reg, &data, 1);
+	u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return stv090x_write_regs(state, reg, &tmp, 1);
 }
 
 static int stv090x_i2c_gate_ctrl(struct stv090x_state *state, int enable)
--- a/drivers/media/dvb-frontends/stv6110x.c
+++ b/drivers/media/dvb-frontends/stv6110x.c
@@ -97,7 +97,9 @@ static int stv6110x_write_regs(struct st
 
 static int stv6110x_write_reg(struct stv6110x_state *stv6110x, u8 reg, u8 data)
 {
-	return stv6110x_write_regs(stv6110x, reg, &data, 1);
+	u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return stv6110x_write_regs(stv6110x, reg, &tmp, 1);
 }
 
 static int stv6110x_init(struct dvb_frontend *fe)
--- a/drivers/media/dvb-frontends/zl10039.c
+++ b/drivers/media/dvb-frontends/zl10039.c
@@ -138,7 +138,9 @@ static inline int zl10039_writereg(struc
 				const enum zl10039_reg_addr reg,
 				const u8 val)
 {
-	return zl10039_write(state, reg, &val, 1);
+	const u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return zl10039_write(state, reg, &tmp, 1);
 }
 
 static int zl10039_init(struct dvb_frontend *fe)

[PATCH 4.9 59/88] media: ts2020: avoid integer overflows on 32 bit machines

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>

commit 81742be14b6a90c9fd0ff6eb4218bdf696ad8e46 upstream.

Before this patch, when compiled for arm32, the signal strength
were reported as:

Lock   (0x1f) Signal= 4294908.66dBm C/N= 12.79dB

Because of a 32 bit integer overflow. After it, it is properly
reported as:

	Lock   (0x1f) Signal= -58.64dBm C/N= 12.79dB

Fixes: 0f91c9d6bab9 ("[media] TS2020: Calculate tuner gain correctly")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb-frontends/ts2020.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/dvb-frontends/ts2020.c
+++ b/drivers/media/dvb-frontends/ts2020.c
@@ -369,7 +369,7 @@ static int ts2020_read_tuner_gain(struct
 		gain2 = clamp_t(long, gain2, 0, 13);
 		v_agc = clamp_t(long, v_agc, 400, 1100);
 
-		*_gain = -(gain1 * 2330 +
+		*_gain = -((__s64)gain1 * 2330 +
 			   gain2 * 3500 +
 			   v_agc * 24 / 10 * 10 +
 			   10000);
@@ -387,7 +387,7 @@ static int ts2020_read_tuner_gain(struct
 		gain3 = clamp_t(long, gain3, 0, 6);
 		v_agc = clamp_t(long, v_agc, 600, 1600);
 
-		*_gain = -(gain1 * 2650 +
+		*_gain = -((__s64)gain1 * 2650 +
 			   gain2 * 3380 +
 			   gain3 * 2850 +
 			   v_agc * 176 / 100 * 10 -

[PATCH 4.9 60/88] media: cxusb, dib0700: ignore XC2028_I2C_FLUSH

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

commit 9893b905e743ded332575ca04486bd586c0772f7 upstream.

The XC2028_I2C_FLUSH only needs to be implemented on a few
devices. Others can safely ignore it.

That prevents filling the dmesg with lots of messages like:

	dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0

Fixes: 4d37ece757a8 ("[media] tuner/xc2028: Add I2C flush callback")
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/cxusb.c           |    2 ++
 drivers/media/usb/dvb-usb/dib0700_devices.c |    1 +
 2 files changed, 3 insertions(+)

--- a/drivers/media/usb/dvb-usb/cxusb.c
+++ b/drivers/media/usb/dvb-usb/cxusb.c
@@ -820,6 +820,8 @@ static int dvico_bluebird_xc2028_callbac
 	case XC2028_RESET_CLK:
 		deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg);
 		break;
+	case XC2028_I2C_FLUSH:
+		break;
 	default:
 		deb_info("%s: unknown command %d, arg %d\n", __func__,
 			 command, arg);
--- a/drivers/media/usb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -431,6 +431,7 @@ static int stk7700ph_xc3028_callback(voi
 		state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
 		break;
 	case XC2028_RESET_CLK:
+	case XC2028_I2C_FLUSH:
 		break;
 	default:
 		err("%s: unknown command %d, arg %d\n", __func__,

[PATCH 4.9 61/88] fs/proc/kcore.c: use probe_kernel_read() instead of memcpy()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit d0290bc20d4739b7a900ae37eb5d4cc3be2b393f upstream.

Commit df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext
data") added a bounce buffer to avoid hardened usercopy checks.  Copying
to the bounce buffer was implemented with a simple memcpy() assuming
that it is always valid to read from kernel memory iff the
kern_addr_valid() check passed.

A simple, but pointless, test case like "dd if=/proc/kcore of=/dev/null"
now can easily crash the kernel, since the former execption handling on
invalid kernel addresses now doesn't work anymore.

Also adding a kern_addr_valid() implementation wouldn't help here.  Most
architectures simply return 1 here, while a couple implemented a page
table walk to figure out if something is mapped at the address in
question.

With DEBUG_PAGEALLOC active mappings are established and removed all the
time, so that relying on the result of kern_addr_valid() before
executing the memcpy() also doesn't work.

Therefore simply use probe_kernel_read() to copy to the bounce buffer.
This also allows to simplify read_kcore().

At least on s390 this fixes the observed crashes and doesn't introduce
warnings that were removed with df04abfd181a ("fs/proc/kcore.c: Add
bounce buffer for ktext data"), even though the generic
probe_kernel_read() implementation uses uaccess functions.

While looking into this I'm also wondering if kern_addr_valid() could be
completely removed...(?)

Link: http://lkml.kernel.org/r/20171202132739.99971-1-heiko.carstens@de.ibm.com
Fixes: df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data")
Fixes: f5509cc18daa ("mm: Hardened usercopy")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/proc/kcore.c |   18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -507,23 +507,15 @@ read_kcore(struct file *file, char __use
 				return -EFAULT;
 		} else {
 			if (kern_addr_valid(start)) {
-				unsigned long n;
-
 				/*
 				 * Using bounce buffer to bypass the
 				 * hardened user copy kernel text checks.
 				 */
-				memcpy(buf, (char *) start, tsz);
-				n = copy_to_user(buffer, buf, tsz);
-				/*
-				 * We cannot distinguish between fault on source
-				 * and fault on destination. When this happens
-				 * we clear too and hope it will trigger the
-				 * EFAULT again.
-				 */
-				if (n) { 
-					if (clear_user(buffer + tsz - n,
-								n))
+				if (probe_kernel_read(buf, (void *) start, tsz)) {
+					if (clear_user(buffer, tsz))
+						return -EFAULT;
+				} else {
+					if (copy_to_user(buffer, buf, tsz))
 						return -EFAULT;
 				}
 			} else {

[PATCH 4.9 62/88] kernel/async.c: revert "async: simplify lowest_in_progress()"

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

commit 4f7e988e63e336827f4150de48163bed05d653bd upstream.

This reverts commit 92266d6ef60c ("async: simplify lowest_in_progress()")
which was simply wrong: In the case where domain is NULL, we now use the
wrong offsetof() in the list_first_entry macro, so we don't actually
fetch the ->cookie value, but rather the eight bytes located
sizeof(struct list_head) further into the struct async_entry.

On 64 bit, that's the data member, while on 32 bit, that's a u64 built
from func and data in some order.

I think the bug happens to be harmless in practice: It obviously only
affects callers which pass a NULL domain, and AFAICT the only such
caller is

  async_synchronize_full() ->
  async_synchronize_full_domain(NULL) ->
  async_synchronize_cookie_domain(ASYNC_COOKIE_MAX, NULL)

and the ASYNC_COOKIE_MAX means that in practice we end up waiting for
the async_global_pending list to be empty - but it would break if
somebody happened to pass (void*)-1 as the data element to
async_schedule, and of course also if somebody ever does a
async_synchronize_cookie_domain(, NULL) with a "finite" cookie value.

Maybe the "harmless in practice" means this isn't -stable material.  But
I'm not completely confident my quick git grep'ing is enough, and there
might be affected code in one of the earlier kernels that has since been
removed, so I'll leave the decision to the stable guys.

Link: http://lkml.kernel.org/r/20171128104938.3921-1-linux@rasmusvillemoes.dk
Fixes: 92266d6ef60c "async: simplify lowest_in_progress()"
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Adam Wallis <awallis@codeaurora.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/async.c |   20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

--- a/kernel/async.c
+++ b/kernel/async.c
@@ -84,20 +84,24 @@ static atomic_t entry_count;
 
 static async_cookie_t lowest_in_progress(struct async_domain *domain)
 {
-	struct list_head *pending;
+	struct async_entry *first = NULL;
 	async_cookie_t ret = ASYNC_COOKIE_MAX;
 	unsigned long flags;
 
 	spin_lock_irqsave(&async_lock, flags);
 
-	if (domain)
-		pending = &domain->pending;
-	else
-		pending = &async_global_pending;
+	if (domain) {
+		if (!list_empty(&domain->pending))
+			first = list_first_entry(&domain->pending,
+					struct async_entry, domain_list);
+	} else {
+		if (!list_empty(&async_global_pending))
+			first = list_first_entry(&async_global_pending,
+					struct async_entry, global_list);
+	}
 
-	if (!list_empty(pending))
-		ret = list_first_entry(pending, struct async_entry,
-				       domain_list)->cookie;
+	if (first)
+		ret = first->cookie;
 
 	spin_unlock_irqrestore(&async_lock, flags);
 	return ret;

[PATCH 4.9 63/88] kernel/relay.c: revert "kernel/relay.c: fix potential memory leak"

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit a1be1f3931bfe0a42b46fef77a04593c2b136e7f upstream.

This reverts commit ba62bafe942b ("kernel/relay.c: fix potential memory leak").

This commit introduced a double free bug, because 'chan' is already
freed by the line:

    kref_put(&chan->kref, relay_destroy_channel);

This bug was found by syzkaller, using the BLKTRACESETUP ioctl.

Link: http://lkml.kernel.org/r/20180127004759.101823-1-ebiggers3@gmail.com
Fixes: ba62bafe942b ("kernel/relay.c: fix potential memory leak")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/relay.c |    1 -
 1 file changed, 1 deletion(-)

--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -611,7 +611,6 @@ free_bufs:
 
 	kref_put(&chan->kref, relay_destroy_channel);
 	mutex_unlock(&relay_channels_mutex);
-	kfree(chan);
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(relay_open);

[PATCH 4.9 64/88] pipe: actually allow root to exceed the pipe buffer limits

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 85c2dd5473b2718b4b63e74bfeb1ca876868e11f upstream.

pipe-user-pages-hard and pipe-user-pages-soft are only supposed to apply
to unprivileged users, as documented in both Documentation/sysctl/fs.txt
and the pipe(7) man page.

However, the capabilities are actually only checked when increasing a
pipe's size using F_SETPIPE_SZ, not when creating a new pipe.  Therefore,
if pipe-user-pages-hard has been set, the root user can run into it and be
unable to create pipes.  Similarly, if pipe-user-pages-soft has been set,
the root user can run into it and have their pipes limited to 1 page each.

Fix this by allowing the privileged override in both cases.

Link: http://lkml.kernel.org/r/20180111052902.14409-4-ebiggers3@gmail.com
Fixes: 759c01142a5d ("pipe: limit the per-user amount of pages allocated in pipes")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pipe.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -617,6 +617,11 @@ static bool too_many_pipe_buffers_hard(u
 	return pipe_user_pages_hard && user_bufs >= pipe_user_pages_hard;
 }
 
+static bool is_unprivileged_user(void)
+{
+	return !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN);
+}
+
 struct pipe_inode_info *alloc_pipe_info(void)
 {
 	struct pipe_inode_info *pipe;
@@ -633,12 +638,12 @@ struct pipe_inode_info *alloc_pipe_info(
 
 	user_bufs = account_pipe_buffers(user, 0, pipe_bufs);
 
-	if (too_many_pipe_buffers_soft(user_bufs)) {
+	if (too_many_pipe_buffers_soft(user_bufs) && is_unprivileged_user()) {
 		user_bufs = account_pipe_buffers(user, pipe_bufs, 1);
 		pipe_bufs = 1;
 	}
 
-	if (too_many_pipe_buffers_hard(user_bufs))
+	if (too_many_pipe_buffers_hard(user_bufs) && is_unprivileged_user())
 		goto out_revert_acct;
 
 	pipe->bufs = kcalloc(pipe_bufs, sizeof(struct pipe_buffer),
@@ -1069,7 +1074,7 @@ static long pipe_set_size(struct pipe_in
 	if (nr_pages > pipe->buffers &&
 			(too_many_pipe_buffers_hard(user_bufs) ||
 			 too_many_pipe_buffers_soft(user_bufs)) &&
-			!capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN)) {
+			is_unprivileged_user()) {
 		ret = -EPERM;
 		goto out_revert_acct;
 	}

[PATCH 4.9 65/88] pipe: fix off-by-one error when checking buffer limits

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 9903a91c763ecdae333a04a9d89d79d2b8966503 upstream.

With pipe-user-pages-hard set to 'N', users were actually only allowed up
to 'N - 1' buffers; and likewise for pipe-user-pages-soft.

Fix this to allow up to 'N' buffers, as would be expected.

Link: http://lkml.kernel.org/r/20180111052902.14409-5-ebiggers3@gmail.com
Fixes: b0b91d18e2e9 ("pipe: fix limit checking in pipe_set_size()")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pipe.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -609,12 +609,12 @@ static unsigned long account_pipe_buffer
 
 static bool too_many_pipe_buffers_soft(unsigned long user_bufs)
 {
-	return pipe_user_pages_soft && user_bufs >= pipe_user_pages_soft;
+	return pipe_user_pages_soft && user_bufs > pipe_user_pages_soft;
 }
 
 static bool too_many_pipe_buffers_hard(unsigned long user_bufs)
 {
-	return pipe_user_pages_hard && user_bufs >= pipe_user_pages_hard;
+	return pipe_user_pages_hard && user_bufs > pipe_user_pages_hard;
 }
 
 static bool is_unprivileged_user(void)

[PATCH 4.9 66/88] HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit edfc3722cfef4217c7fe92b272cbe0288ba1ff57 upstream.

The Toshiba Click Mini uses an i2c attached keyboard/touchpad combo
(single i2c_hid device for both) which has a vid:pid of 04F3:0401,
which is also used by a bunch of Elan touchpads which are handled by the
drivers/input/mouse/elan_i2c driver, but that driver deals with pure
touchpads and does not work for a combo device such as the one on the
Toshiba Click Mini.

The combo on the Mini has an ACPI id of ELAN0800, which is not claimed
by the elan_i2c driver, so check for that and if it is found do not ignore
the device. This fixes the keyboard/touchpad combo on the Mini not working
(although with the touchpad in mouse emulation mode).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/hid-core.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2365,7 +2365,6 @@ static const struct hid_device_id hid_ig
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0400) },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0401) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
@@ -2635,6 +2634,17 @@ bool hid_ignore(struct hid_device *hdev)
 			strncmp(hdev->name, "www.masterkit.ru MA901", 22) == 0)
 			return true;
 		break;
+	case USB_VENDOR_ID_ELAN:
+		/*
+		 * Many Elan devices have a product id of 0x0401 and are handled
+		 * by the elan_i2c input driver. But the ACPI HID ELAN0800 dev
+		 * is not (and cannot be) handled by that driver ->
+		 * Ignore all 0x0401 devs except for the ELAN0800 dev.
+		 */
+		if (hdev->product == 0x0401 &&
+		    strncmp(hdev->name, "ELAN0800", 8) != 0)
+			return true;
+		break;
 	}
 
 	if (hdev->type == HID_TYPE_USBMOUSE &&

[PATCH 4.9 67/88] Bluetooth: btsdio: Do not bind to non-removable BCM43341

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit b4cdaba274247c9c841c6a682c08fa91fb3aa549 upstream.

BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT)
use an UART connection for bluetooth. But they also advertise btsdio
support on their 3th sdio function, this causes 2 problems:

1) A non functioning BT HCI getting registered

2) Since the btsdio driver does not have suspend/resume callbacks,
mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify()
to react as if the SDIO-card is removed and since the slot is
marked as non-removable it will never get detected as inserted again.
Which results in wifi no longer working after a suspend/resume.

This commit fixes both by making btsdio ignore BCM43341 devices
when connected to a slot which is marked non-removable.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/btsdio.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -31,6 +31,7 @@
 #include <linux/errno.h>
 #include <linux/skbuff.h>
 
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/sdio_func.h>
 
@@ -291,6 +292,14 @@ static int btsdio_probe(struct sdio_func
 		tuple = tuple->next;
 	}
 
+	/* BCM43341 devices soldered onto the PCB (non-removable) use an
+	 * uart connection for bluetooth, ignore the BT SDIO interface.
+	 */
+	if (func->vendor == SDIO_VENDOR_ID_BROADCOM &&
+	    func->device == SDIO_DEVICE_ID_BROADCOM_43341 &&
+	    !mmc_card_is_removable(func->card->host))
+		return -ENODEV;
+
 	data = devm_kzalloc(&func->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;

[PATCH 4.9 68/88] Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 7d06d5895c159f64c46560dc258e553ad8670fe0 upstream.

This reverts commit fd865802c66bc451dc515ed89360f84376ce1a56.

This commit causes a regression on some QCA ROME chips. The USB device
reset happens in btusb_open(), hence firmware loading gets interrupted.

Furthermore, this commit stops working after commit
("a0085f2510e8976614ad8f766b209448b385492f Bluetooth: btusb: driver to
enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in
btusb_suspend() when it's not a wakeup source.

If we really want to reset the USB device, we need to do it before
btusb_open(). Let's handle it in drivers/usb/core/quirks.c.

Cc: Leif Liddy <leif.linux@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Daniel Drake <drake@endlessm.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/btusb.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2925,12 +2925,6 @@ static int btusb_probe(struct usb_interf
 	if (id->driver_info & BTUSB_QCA_ROME) {
 		data->setup_on_usb = btusb_setup_qca;
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
-
-		/* QCA Rome devices lose their updated firmware over suspend,
-		 * but the USB hub doesn't notice any status change.
-		 * Explicitly request a device reset on resume.
-		 */
-		set_bit(BTUSB_RESET_RESUME, &data->flags);
 	}
 
 #ifdef CONFIG_BT_HCIBTUSB_RTL

[PATCH 4.9 69/88] Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 61f5acea8737d9b717fcc22bb6679924f3c82b98 upstream.

Commit 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"")
removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices,
instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c.

This was done because the DIY BTUSB_RESET_RESUME reset-resume handling
has several issues (see the original commit message). An added advantage
of moving over to the USB-core reset-resume handling is that it also
disables autosuspend for these devices, which is similarly broken on these.

But there are 2 issues with this approach:
1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek
   devices.
2) Sofar only 2 of the 10 QCA devices known to the btusb code have been
   added to usb/core/quirks.c and if we fix the Realtek case the same way
   we need to add an additional 14 entries. So in essence we need to
   duplicate a large part of the usb_device_id table in btusb.c in
   usb/core/quirks.c and manually keep them in sync.

This commit instead restores setting a reset-resume quirk for QCA devices
in the btusb.c code, avoiding the duplicate usb_device_id table problem.

This commit avoids the problems with the original DIY BTUSB_RESET_RESUME
code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the
usb_device.

This commit also moves the BTUSB_REALTEK case over to directly setting the
USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused
BTUSB_RESET_RESUME code.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
Fixes: 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"")
Cc: Leif Liddy <leif.linux@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/btusb.c |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -23,6 +23,7 @@
 
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/usb/quirks.h>
 #include <linux/firmware.h>
 #include <asm/unaligned.h>
 
@@ -369,8 +370,8 @@ static const struct usb_device_id blackl
 #define BTUSB_FIRMWARE_LOADED	7
 #define BTUSB_FIRMWARE_FAILED	8
 #define BTUSB_BOOTING		9
-#define BTUSB_RESET_RESUME	10
-#define BTUSB_DIAG_RUNNING	11
+#define BTUSB_DIAG_RUNNING	10
+#define BTUSB_OOB_WAKE_ENABLED	11
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -2925,6 +2926,12 @@ static int btusb_probe(struct usb_interf
 	if (id->driver_info & BTUSB_QCA_ROME) {
 		data->setup_on_usb = btusb_setup_qca;
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+
+		/* QCA Rome devices lose their updated firmware over suspend,
+		 * but the USB hub doesn't notice any status change.
+		 * explicitly request a device reset on resume.
+		 */
+		interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
 	}
 
 #ifdef CONFIG_BT_HCIBTUSB_RTL
@@ -2935,7 +2942,7 @@ static int btusb_probe(struct usb_interf
 		 * but the USB hub doesn't notice any status change.
 		 * Explicitly request a device reset on resume.
 		 */
-		set_bit(BTUSB_RESET_RESUME, &data->flags);
+		interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
 	}
 #endif
 
@@ -3092,14 +3099,6 @@ static int btusb_suspend(struct usb_inte
 	btusb_stop_traffic(data);
 	usb_kill_anchored_urbs(&data->tx_anchor);
 
-	/* Optionally request a device reset on resume, but only when
-	 * wakeups are disabled. If wakeups are enabled we assume the
-	 * device will stay powered up throughout suspend.
-	 */
-	if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
-	    !device_may_wakeup(&data->udev->dev))
-		data->udev->reset_resume = 1;
-
 	return 0;
 }
 

[PATCH 4.9 70/88] signal/openrisc: Fix do_unaligned_access to send the proper signal

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit 500d58300571b6602341b041f97c082a461ef994 upstream.

While reviewing the signal sending on openrisc the do_unaligned_access
function stood out because it is obviously wrong.  A comment about an
si_code set above when actually si_code is never set.  Leading to a
random si_code being sent to userspace in the event of an unaligned
access.

Looking further SIGBUS BUS_ADRALN is the proper pair of signal and
si_code to send for an unaligned access. That is what other
architectures do and what is required by posix.

Given that do_unaligned_access is broken in a way that no one can be
relying on it on openrisc fix the code to just do the right thing.

Fixes: 769a8a96229e ("OpenRISC: Traps")
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: openrisc@lists.librecores.org
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/openrisc/kernel/traps.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/arch/openrisc/kernel/traps.c
+++ b/arch/openrisc/kernel/traps.c
@@ -302,12 +302,12 @@ asmlinkage void do_unaligned_access(stru
 	siginfo_t info;
 
 	if (user_mode(regs)) {
-		/* Send a SIGSEGV */
-		info.si_signo = SIGSEGV;
+		/* Send a SIGBUS */
+		info.si_signo = SIGBUS;
 		info.si_errno = 0;
-		/* info.si_code has been set above */
-		info.si_addr = (void *)address;
-		force_sig_info(SIGSEGV, &info, current);
+		info.si_code = BUS_ADRALN;
+		info.si_addr = (void __user *)address;
+		force_sig_info(SIGBUS, &info, current);
 	} else {
 		printk("KERNEL: Unaligned Access 0x%.8lx\n", address);
 		show_registers(regs);

[PATCH 4.9 71/88] signal/sh: Ensure si_signo is initialized in do_divide_error

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit 0e88bb002a9b2ee8cc3cc9478ce2dc126f849696 upstream.

Set si_signo.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Fixes: 0983b31849bb ("sh: Wire up division and address error exceptions on SH-2A.")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sh/kernel/traps_32.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -607,7 +607,8 @@ asmlinkage void do_divide_error(unsigned
 		break;
 	}
 
-	force_sig_info(SIGFPE, &info, current);
+	info.si_signo = SIGFPE;
+	force_sig_info(info.si_signo, &info, current);
 }
 #endif
 

[PATCH 4.9 72/88] alpha: fix crash if pthread_create races with signal delivery

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 21ffceda1c8b3807615c40d440d7815e0c85d366 upstream.

On alpha, a process will crash if it attempts to start a thread and a
signal is delivered at the same time. The crash can be reproduced with
this program: https://cygwin.com/ml/cygwin/2014-11/msg00473.html

The reason for the crash is this:
* we call the clone syscall
* we go to the function copy_process
* copy process calls copy_thread_tls, it is a wrapper around copy_thread
* copy_thread sets the tls pointer: childti->pcb.unique = regs->r20
* copy_thread sets regs->r20 to zero
* we go back to copy_process
* copy process checks "if (signal_pending(current))" and returns
  -ERESTARTNOINTR
* the clone syscall is restarted, but this time, regs->r20 is zero, so
  the new thread is created with zero tls pointer
* the new thread crashes in start_thread when attempting to access tls

The comment in the code says that setting the register r20 is some
compatibility with OSF/1. But OSF/1 doesn't use the CLONE_SETTLS flag, so
we don't have to zero r20 if CLONE_SETTLS is set. This patch fixes the bug
by zeroing regs->r20 only if CLONE_SETTLS is not set.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/alpha/kernel/process.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -265,12 +265,13 @@ copy_thread(unsigned long clone_flags, u
 	   application calling fork.  */
 	if (clone_flags & CLONE_SETTLS)
 		childti->pcb.unique = regs->r20;
+	else
+		regs->r20 = 0;	/* OSF/1 has some strange fork() semantics.  */
 	childti->pcb.usp = usp ?: rdusp();
 	*childregs = *regs;
 	childregs->r0 = 0;
 	childregs->r19 = 0;
 	childregs->r20 = 1;	/* OSF/1 has some strange fork() semantics.  */
-	regs->r20 = 0;
 	stack = ((struct switch_stack *) regs) - 1;
 	*childstack = *stack;
 	childstack->r26 = (unsigned long) ret_from_fork;

[PATCH 4.9 73/88] alpha: fix reboot on Avanti platform

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 55fc633c41a08ce9244ff5f528f420b16b1e04d6 upstream.

We need to define NEED_SRM_SAVE_RESTORE on the Avanti, otherwise we get
machine check exception when attempting to reboot the machine.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/alpha/kernel/pci_impl.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/alpha/kernel/pci_impl.h
+++ b/arch/alpha/kernel/pci_impl.h
@@ -143,7 +143,8 @@ struct pci_iommu_arena
 };
 
 #if defined(CONFIG_ALPHA_SRM) && \
-    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA))
+    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
+     defined(CONFIG_ALPHA_AVANTI))
 # define NEED_SRM_SAVE_RESTORE
 #else
 # undef NEED_SRM_SAVE_RESTORE

[PATCH 4.9 74/88] alpha: fix formating of stack content

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 4b01abdb32fc36abe877503bfbd33019159fad71 upstream.

Since version 4.9, the kernel automatically breaks printk calls into
multiple newlines unless pr_cont is used. Fix the alpha stacktrace code,
so that it prints stack trace in four columns, as it was initially
intended.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/alpha/kernel/traps.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -158,11 +158,16 @@ void show_stack(struct task_struct *task
 	for(i=0; i < kstack_depth_to_print; i++) {
 		if (((long) stack & (THREAD_SIZE-1)) == 0)
 			break;
-		if (i && ((i % 4) == 0))
-			printk("\n       ");
-		printk("%016lx ", *stack++);
+		if ((i % 4) == 0) {
+			if (i)
+				pr_cont("\n");
+			printk("       ");
+		} else {
+			pr_cont(" ");
+		}
+		pr_cont("%016lx", *stack++);
 	}
-	printk("\n");
+	pr_cont("\n");
 	dik_show_trace(sp);
 }
 

[PATCH 4.9 75/88] xtensa: fix futex_atomic_cmpxchg_inatomic

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Max Filippov <jcmvbkbc@gmail.com>

commit ca47480921587ae30417dd234a9f79af188e3666 upstream.

Return 0 if the operation was successful, not the userspace memory
value. Check that userspace value equals passed oldval, not itself.
Don't update *uval if the value wasn't read from userspace memory.

This fixes process hang due to infinite loop in futex_lock_pi.
It also fixes a bunch of glibc tests nptl/tst-mutexpi*.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/xtensa/include/asm/futex.h |   23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

--- a/arch/xtensa/include/asm/futex.h
+++ b/arch/xtensa/include/asm/futex.h
@@ -109,7 +109,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
 			      u32 oldval, u32 newval)
 {
 	int ret = 0;
-	u32 prev;
 
 	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
 		return -EFAULT;
@@ -120,26 +119,24 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
 
 	__asm__ __volatile__ (
 	"	# futex_atomic_cmpxchg_inatomic\n"
-	"1:	l32i	%1, %3, 0\n"
-	"	mov	%0, %5\n"
-	"	wsr	%1, scompare1\n"
-	"2:	s32c1i	%0, %3, 0\n"
-	"3:\n"
+	"	wsr	%5, scompare1\n"
+	"1:	s32c1i	%1, %4, 0\n"
+	"	s32i	%1, %6, 0\n"
+	"2:\n"
 	"	.section .fixup,\"ax\"\n"
 	"	.align 4\n"
-	"4:	.long	3b\n"
-	"5:	l32r	%1, 4b\n"
-	"	movi	%0, %6\n"
+	"3:	.long	2b\n"
+	"4:	l32r	%1, 3b\n"
+	"	movi	%0, %7\n"
 	"	jx	%1\n"
 	"	.previous\n"
 	"	.section __ex_table,\"a\"\n"
-	"	.long 1b,5b,2b,5b\n"
+	"	.long 1b,4b\n"
 	"	.previous\n"
-	: "+r" (ret), "=&r" (prev), "+m" (*uaddr)
-	: "r" (uaddr), "r" (oldval), "r" (newval), "I" (-EFAULT)
+	: "+r" (ret), "+r" (newval), "+m" (*uaddr), "+m" (*uval)
+	: "r" (uaddr), "r" (oldval), "r" (uval), "I" (-EFAULT)
 	: "memory");
 
-	*uval = prev;
 	return ret;
 }
 

[PATCH 4.9 76/88] EDAC, octeon: Fix an uninitialized variable warning

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <jhogan@kernel.org>

commit 544e92581a2ac44607d7cc602c6b54d18656f56d upstream.

Fix an uninitialized variable warning in the Octeon EDAC driver, as seen
in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU
Tools 2016.05-03:

  drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’:
  drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \
    be used uninitialized in this function [-Wmaybe-uninitialized]
    if (int_reg.s.sec_err || int_reg.s.ded_err) {
                        ^
Iinitialise the whole int_reg variable to zero before the conditional
assignments in the error injection case.

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Fixes: 1bc021e81565 ("EDAC: Octeon: Add error injection support")
Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/octeon_edac-lmc.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/edac/octeon_edac-lmc.c
+++ b/drivers/edac/octeon_edac-lmc.c
@@ -79,6 +79,7 @@ static void octeon_lmc_edac_poll_o2(stru
 	if (!pvt->inject)
 		int_reg.u64 = cvmx_read_csr(CVMX_LMCX_INT(mci->mc_idx));
 	else {
+		int_reg.u64 = 0;
 		if (pvt->error_type == 1)
 			int_reg.s.sec_err = 1;
 		if (pvt->error_type == 2)

[PATCH 4.9 77/88] pinctrl: intel: Initialize GPIO properly when used through irqchip

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit f5a26acf0162477af6ee4c11b4fb9cffe5d3e257 upstream.

When a GPIO is requested using gpiod_get_* APIs the intel pinctrl driver
switches the pin to GPIO mode and makes sure interrupts are routed to
the GPIO hardware instead of IOAPIC. However, if the GPIO is used
directly through irqchip, as is the case with many I2C-HID devices where
I2C core automatically configures interrupt for the device, the pin is
not initialized as GPIO. Instead we rely that the BIOS configures the
pin accordingly which seems not to be the case at least in Asus X540NA
SKU3 with Focaltech touchpad.

When the pin is not properly configured it might result weird behaviour
like interrupts suddenly stop firing completely and the touchpad stops
responding to user input.

Fix this by properly initializing the pin to GPIO mode also when it is
used directly through irqchip.

Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Reported-by: Daniel Drake <drake@endlessm.com>
Reported-and-tested-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/intel/pinctrl-intel.c |   23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -368,6 +368,18 @@ static void __intel_gpio_set_direction(v
 	writel(value, padcfg0);
 }
 
+static void intel_gpio_set_gpio_mode(void __iomem *padcfg0)
+{
+	u32 value;
+
+	/* Put the pad into GPIO mode */
+	value = readl(padcfg0) & ~PADCFG0_PMODE_MASK;
+	/* Disable SCI/SMI/NMI generation */
+	value &= ~(PADCFG0_GPIROUTIOXAPIC | PADCFG0_GPIROUTSCI);
+	value &= ~(PADCFG0_GPIROUTSMI | PADCFG0_GPIROUTNMI);
+	writel(value, padcfg0);
+}
+
 static int intel_gpio_request_enable(struct pinctrl_dev *pctldev,
 				     struct pinctrl_gpio_range *range,
 				     unsigned pin)
@@ -375,7 +387,6 @@ static int intel_gpio_request_enable(str
 	struct intel_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
 	void __iomem *padcfg0;
 	unsigned long flags;
-	u32 value;
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
@@ -385,13 +396,7 @@ static int intel_gpio_request_enable(str
 	}
 
 	padcfg0 = intel_get_padcfg(pctrl, pin, PADCFG0);
-	/* Put the pad into GPIO mode */
-	value = readl(padcfg0) & ~PADCFG0_PMODE_MASK;
-	/* Disable SCI/SMI/NMI generation */
-	value &= ~(PADCFG0_GPIROUTIOXAPIC | PADCFG0_GPIROUTSCI);
-	value &= ~(PADCFG0_GPIROUTSMI | PADCFG0_GPIROUTNMI);
-	writel(value, padcfg0);
-
+	intel_gpio_set_gpio_mode(padcfg0);
 	/* Disable TX buffer and enable RX (this will be input) */
 	__intel_gpio_set_direction(padcfg0, true);
 
@@ -770,6 +775,8 @@ static int intel_gpio_irq_type(struct ir
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
+	intel_gpio_set_gpio_mode(reg);
+
 	value = readl(reg);
 
 	value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);

[PATCH 4.9 78/88] pktcdvd: Fix pkt_setup_dev() error path

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@wdc.com>

commit 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd upstream.

Commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue")
modified add_disk() and disk_release() but did not update any of the
error paths that trigger a put_disk() call after disk->queue has been
assigned. That introduced the following behavior in the pktcdvd driver
if pkt_new_dev() fails:

Kernel BUG at 00000000e98fd882 [verbose debug info unavailable]

Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL,
fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev()
error path.

Fixes: commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/pktcdvd.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2779,7 +2779,7 @@ static int pkt_setup_dev(dev_t dev, dev_
 	pd->pkt_dev = MKDEV(pktdev_major, idx);
 	ret = pkt_new_dev(pd, dev);
 	if (ret)
-		goto out_new_dev;
+		goto out_mem2;
 
 	/* inherit events of the host device */
 	disk->events = pd->bdev->bd_disk->events;
@@ -2797,8 +2797,6 @@ static int pkt_setup_dev(dev_t dev, dev_
 	mutex_unlock(&ctl_mutex);
 	return 0;
 
-out_new_dev:
-	blk_cleanup_queue(disk->queue);
 out_mem2:
 	put_disk(disk);
 out_mem:

[PATCH 4.9 79/88] clocksource/drivers/stm32: Fix kernel panic with multiple timers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Lezcano <daniel.lezcano@linaro.org>

commit e0aeca3d8cbaea514eb98df1149faa918f9ec42d upstream.

The current code hides a couple of bugs:

 - The global variable 'clock_event_ddata' is overwritten each time the
   init function is invoked.

This is fixed with a kmemdup() instead of assigning the global variable. That
prevents a memory corruption when several timers are defined in the DT.

 - The clockevent's event_handler is NULL if the time framework does
   not select the clockevent when registering it, this is fine but the init
   code generates in any case an interrupt leading to dereference this
   NULL pointer.

The stm32 timer works with shadow registers, a mechanism to cache the
registers. When a change is done in one buffered register, we need to
artificially generate an event to force the timer to copy the content
of the register to the shadowed register.

The auto-reload register (ARR) is one of the shadowed register as well as
the prescaler register (PSC), so in order to force the copy, we issue an
event which in turn leads to an interrupt and the NULL dereference.

This is fixed by inverting two lines where we clear the status register
before enabling the update event interrupt.

As this kernel crash is resulting from the combination of these two bugs,
the fixes are grouped into a single patch.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-11-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clocksource/timer-stm32.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -106,6 +106,10 @@ static int __init stm32_clockevent_init(
 	unsigned long rate, max_delta;
 	int irq, ret, bits, prescaler = 1;
 
+	data = kmemdup(&clock_event_ddata, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
 		ret = PTR_ERR(clk);
@@ -156,8 +160,8 @@ static int __init stm32_clockevent_init(
 
 	writel_relaxed(prescaler - 1, data->base + TIM_PSC);
 	writel_relaxed(TIM_EGR_UG, data->base + TIM_EGR);
-	writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER);
 	writel_relaxed(0, data->base + TIM_SR);
+	writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER);
 
 	data->periodic_top = DIV_ROUND_CLOSEST(rate, prescaler * HZ);
 
@@ -184,6 +188,7 @@ err_iomap:
 err_clk_enable:
 	clk_put(clk);
 err_clk_get:
+	kfree(data);
 	return ret;
 }
 

[PATCH 4.9 80/88] lib/ubsan.c: s/missaligned/misaligned/

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Morton <akpm@linux-foundation.org>

commit b8fe1120b4ba342b4f156d24e952d6e686b20298 upstream.

A vist from the spelling fairy.

Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/ubsan.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/lib/ubsan.c
+++ b/lib/ubsan.c
@@ -281,7 +281,7 @@ static void handle_null_ptr_deref(struct
 	ubsan_epilogue(&flags);
 }
 
-static void handle_missaligned_access(struct type_mismatch_data *data,
+static void handle_misaligned_access(struct type_mismatch_data *data,
 				unsigned long ptr)
 {
 	unsigned long flags;
@@ -322,7 +322,7 @@ void __ubsan_handle_type_mismatch(struct
 	if (!ptr)
 		handle_null_ptr_deref(data);
 	else if (data->alignment && !IS_ALIGNED(ptr, data->alignment))
-		handle_missaligned_access(data, ptr);
+		handle_misaligned_access(data, ptr);
 	else
 		handle_object_size_mismatch(data, ptr);
 }

[PATCH 4.9 81/88] lib/ubsan: add type mismatch handler for new GCC/Clang

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrey Ryabinin <aryabinin@virtuozzo.com>

commit 42440c1f9911b4b7b8ba3dc4e90c1197bc561211 upstream.

UBSAN=y fails to build with new GCC/clang:

    arch/x86/kernel/head64.o: In function `sanitize_boot_params':
    arch/x86/include/asm/bootparam_utils.h:37: undefined reference to `__ubsan_handle_type_mismatch_v1'

because Clang and GCC 8 slightly changed ABI for 'type mismatch' errors.
Compiler now uses new __ubsan_handle_type_mismatch_v1() function with
slightly modified 'struct type_mismatch_data'.

Let's add new 'struct type_mismatch_data_common' which is independent from
compiler's layout of 'struct type_mismatch_data'.  And make
__ubsan_handle_type_mismatch[_v1]() functions transform compiler-dependent
type mismatch data to our internal representation.  This way, we can
support both old and new compilers with minimal amount of change.

Link: http://lkml.kernel.org/r/20180119152853.16806-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Sodagudi Prasad <psodagud@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/ubsan.c |   48 ++++++++++++++++++++++++++++++++++++++----------
 lib/ubsan.h |   14 ++++++++++++++
 2 files changed, 52 insertions(+), 10 deletions(-)

--- a/lib/ubsan.c
+++ b/lib/ubsan.c
@@ -265,14 +265,14 @@ void __ubsan_handle_divrem_overflow(stru
 }
 EXPORT_SYMBOL(__ubsan_handle_divrem_overflow);
 
-static void handle_null_ptr_deref(struct type_mismatch_data *data)
+static void handle_null_ptr_deref(struct type_mismatch_data_common *data)
 {
 	unsigned long flags;
 
-	if (suppress_report(&data->location))
+	if (suppress_report(data->location))
 		return;
 
-	ubsan_prologue(&data->location, &flags);
+	ubsan_prologue(data->location, &flags);
 
 	pr_err("%s null pointer of type %s\n",
 		type_check_kinds[data->type_check_kind],
@@ -281,15 +281,15 @@ static void handle_null_ptr_deref(struct
 	ubsan_epilogue(&flags);
 }
 
-static void handle_misaligned_access(struct type_mismatch_data *data,
+static void handle_misaligned_access(struct type_mismatch_data_common *data,
 				unsigned long ptr)
 {
 	unsigned long flags;
 
-	if (suppress_report(&data->location))
+	if (suppress_report(data->location))
 		return;
 
-	ubsan_prologue(&data->location, &flags);
+	ubsan_prologue(data->location, &flags);
 
 	pr_err("%s misaligned address %p for type %s\n",
 		type_check_kinds[data->type_check_kind],
@@ -299,15 +299,15 @@ static void handle_misaligned_access(str
 	ubsan_epilogue(&flags);
 }
 
-static void handle_object_size_mismatch(struct type_mismatch_data *data,
+static void handle_object_size_mismatch(struct type_mismatch_data_common *data,
 					unsigned long ptr)
 {
 	unsigned long flags;
 
-	if (suppress_report(&data->location))
+	if (suppress_report(data->location))
 		return;
 
-	ubsan_prologue(&data->location, &flags);
+	ubsan_prologue(data->location, &flags);
 	pr_err("%s address %p with insufficient space\n",
 		type_check_kinds[data->type_check_kind],
 		(void *) ptr);
@@ -315,7 +315,7 @@ static void handle_object_size_mismatch(
 	ubsan_epilogue(&flags);
 }
 
-void __ubsan_handle_type_mismatch(struct type_mismatch_data *data,
+static void ubsan_type_mismatch_common(struct type_mismatch_data_common *data,
 				unsigned long ptr)
 {
 
@@ -326,8 +326,36 @@ void __ubsan_handle_type_mismatch(struct
 	else
 		handle_object_size_mismatch(data, ptr);
 }
+
+void __ubsan_handle_type_mismatch(struct type_mismatch_data *data,
+				unsigned long ptr)
+{
+	struct type_mismatch_data_common common_data = {
+		.location = &data->location,
+		.type = data->type,
+		.alignment = data->alignment,
+		.type_check_kind = data->type_check_kind
+	};
+
+	ubsan_type_mismatch_common(&common_data, ptr);
+}
 EXPORT_SYMBOL(__ubsan_handle_type_mismatch);
 
+void __ubsan_handle_type_mismatch_v1(struct type_mismatch_data_v1 *data,
+				unsigned long ptr)
+{
+
+	struct type_mismatch_data_common common_data = {
+		.location = &data->location,
+		.type = data->type,
+		.alignment = 1UL << data->log_alignment,
+		.type_check_kind = data->type_check_kind
+	};
+
+	ubsan_type_mismatch_common(&common_data, ptr);
+}
+EXPORT_SYMBOL(__ubsan_handle_type_mismatch_v1);
+
 void __ubsan_handle_nonnull_return(struct nonnull_return_data *data)
 {
 	unsigned long flags;
--- a/lib/ubsan.h
+++ b/lib/ubsan.h
@@ -36,6 +36,20 @@ struct type_mismatch_data {
 	unsigned char type_check_kind;
 };
 
+struct type_mismatch_data_v1 {
+	struct source_location location;
+	struct type_descriptor *type;
+	unsigned char log_alignment;
+	unsigned char type_check_kind;
+};
+
+struct type_mismatch_data_common {
+	struct source_location *location;
+	struct type_descriptor *type;
+	unsigned long alignment;
+	unsigned char type_check_kind;
+};
+
 struct nonnull_arg_data {
 	struct source_location location;
 	struct source_location attr_location;

[PATCH 4.9 82/88] btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Borisov <nborisov@suse.com>

commit f3038ee3a3f1017a1cbe9907e31fa12d366c5dcb upstream.

This function was introduced by 247e743cbe6e ("Btrfs: Use async helpers
to deal with pages that have been improperly dirtied") and it didn't do
any error handling then. This function might very well fail in ENOMEM
situation, yet it's not handled, this could lead to inconsistent state.
So let's handle the failure by setting the mapping error bit.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 fs/btrfs/inode.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2063,8 +2063,15 @@ again:
 		goto out;
 	 }
 
-	btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state,
-				  0);
+	ret = btrfs_set_extent_delalloc(inode, page_start, page_end,
+					&cached_state, 0);
+	if (ret) {
+		mapping_set_error(page->mapping, ret);
+		end_extent_writepage(page, ret, page_start, page_end);
+		ClearPageChecked(page);
+		goto out;
+	}
+
 	ClearPageChecked(page);
 	set_page_dirty(page);
 out:

[PATCH 4.9 83/88] drm/i915: Avoid PPS HW/SW state mismatch due to rounding

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Imre Deak <imre.deak@intel.com>

commit 5643205c6340b565a3be0fe0e7305dc4aa551c74 upstream.

We store a SW state of the t11_t12 timing in 100usec units but have to
program it in 100msec as required by HW. The rounding used during
programming means there will be a mismatch between the SW and HW states
of this value triggering a "PPS state mismatch" error. Avoid this by
storing the already rounded-up value in the SW state.

Note that we still calculate panel_power_cycle_delay with the finer
100usec granularity to avoid any needless waits using that version of
the delay.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903
Cc: joks <joks@linux.pl>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129175137.2889-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_dp.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5063,6 +5063,12 @@ intel_dp_init_panel_power_sequencer(stru
 	 */
 	final->t8 = 1;
 	final->t9 = 1;
+
+	/*
+	 * HW has only a 100msec granularity for t11_t12 so round it up
+	 * accordingly.
+	 */
+	final->t11_t12 = roundup(final->t11_t12, 100 * 10);
 }
 
 static void

[PATCH 4.9 84/88] ACPI: sbshc: remove raw pointer from printk() message

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 43cdd1b716b26f6af16da4e145b6578f98798bf6 upstream.

There's no need to be printing a raw kernel pointer to the kernel log at
every boot.  So just remove it, and change the whole message to use the
correct dev_info() call at the same time.

Reported-by: Wang Qize <wang_qize@venustech.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/sbshc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -275,8 +275,8 @@ static int acpi_smbus_hc_add(struct acpi
 	device->driver_data = hc;
 
 	acpi_ec_add_query_handler(hc->ec, hc->query_bit, NULL, smbus_alarm, hc);
-	printk(KERN_INFO PREFIX "SBS HC: EC = 0x%p, offset = 0x%0x, query_bit = 0x%0x\n",
-		hc->ec, hc->offset, hc->query_bit);
+	dev_info(&device->dev, "SBS HC: offset = 0x%0x, query_bit = 0x%0x\n",
+		 hc->offset, hc->query_bit);
 
 	return 0;
 }

[PATCH 4.9 85/88] acpi, nfit: fix register dimm error handling

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit 23fbd7c70aec7600e3227eb24259fc55bf6e4881 upstream.

A NULL pointer reference kernel bug was observed when
acpi_nfit_add_dimm() called in acpi_nfit_register_dimms() failed. This
error path does not set nfit_mem->nvdimm, but the 2nd
list_for_each_entry() loop in the function assumes it's always set. Add
a check to nfit_mem->nvdimm.

Fixes: ba9c8dd3c222 ("acpi, nfit: add dimm device notification support")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/nfit/core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -1535,6 +1535,9 @@ static int acpi_nfit_register_dimms(stru
 		struct kernfs_node *nfit_kernfs;
 
 		nvdimm = nfit_mem->nvdimm;
+		if (!nvdimm)
+			continue;
+
 		nfit_kernfs = sysfs_get_dirent(nvdimm_kobj(nvdimm)->sd, "nfit");
 		if (nfit_kernfs)
 			nfit_mem->flags_attr = sysfs_get_dirent(nfit_kernfs,

[PATCH 4.9 86/88] ovl: fix failure to fsync lower dir

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amir Goldstein <amir73il@gmail.com>

commit d796e77f1dd541fe34481af2eee6454688d13982 upstream.

As a writable mount, it is not expected for overlayfs to return
EINVAL/EROFS for fsync, even if dir/file is not changed.

This commit fixes the case of fsync of directory, which is easier to
address, because overlayfs already implements fsync file operation for
directories.

The problem reported by Raphael is that new PostgreSQL 10.0 with a
database in overlayfs where lower layer in squashfs fails to start.
The failure is due to fsync error, when PostgreSQL does fsync on all
existing db directories on startup and a specific directory exists
lower layer with no changes.

Reported-by: Raphael Hertzog <raphael@ouaza.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Raphaël Hertzog <hertzog@debian.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/readdir.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -434,10 +434,14 @@ static int ovl_dir_fsync(struct file *fi
 	struct dentry *dentry = file->f_path.dentry;
 	struct file *realfile = od->realfile;
 
+	/* Nothing to sync for lower */
+	if (!OVL_TYPE_UPPER(ovl_path_type(dentry)))
+		return 0;
+
 	/*
 	 * Need to check if we started out being a lower dir, but got copied up
 	 */
-	if (!od->is_upper && OVL_TYPE_UPPER(ovl_path_type(dentry))) {
+	if (!od->is_upper) {
 		struct inode *inode = file_inode(file);
 
 		realfile = lockless_dereference(od->upperfile);

[PATCH 4.9 87/88] mn10300/misalignment: Use SIGSEGV SEGV_MAPERR to report a failed user copy

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit 6ac1dc736b323011a55ecd1fc5897c24c4f77cbd upstream.

Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely
not correct.  With si_code set to SI_USER si_pid and si_uid will be copied to
userspace instead of si_addr.  Which is very wrong.

So fix this by using a sensible si_code (SEGV_MAPERR) for this failure.

Fixes: b920de1b77b7 ("mn10300: add the MN10300/AM33 architecture to the kernel")
Cc: David Howells <dhowells@redhat.com>
Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mn10300/mm/misalignment.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mn10300/mm/misalignment.c
+++ b/arch/mn10300/mm/misalignment.c
@@ -437,7 +437,7 @@ transfer_failed:
 
 	info.si_signo	= SIGSEGV;
 	info.si_errno	= 0;
-	info.si_code	= 0;
+	info.si_code	= SEGV_MAPERR;
 	info.si_addr	= (void *) regs->pc;
 	force_sig_info(SIGSEGV, &info, current);
 	return;

[PATCH 4.9 88/88] ftrace: Remove incorrect setting of glob search field

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 7b6586562708d2b3a04fe49f217ddbadbbbb0546 upstream.

__unregister_ftrace_function_probe() will incorrectly parse the glob filter
because it resets the search variable that was setup by filter_parse_regex().

Al Viro reported this:

    After that call of filter_parse_regex() we could have func_g.search not
    equal to glob only if glob started with '!' or '*'.  In the former case
    we would've buggered off with -EINVAL (not = 1).  In the latter we
    would've set func_g.search equal to glob + 1, calculated the length of
    that thing in func_g.len and proceeded to reset func_g.search back to
    glob.

    Suppose the glob is e.g. *foo*.  We end up with
	    func_g.type = MATCH_MIDDLE_ONLY;
	    func_g.len = 3;
	    func_g.search = "*foo";
    Feeding that to ftrace_match_record() will not do anything sane - we
    will be looking for names containing "*foo" (->len is ignored for that
    one).

Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk

Fixes: 3ba009297149f ("ftrace: Introduce ftrace_glob structure")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c |    1 -
 1 file changed, 1 deletion(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3911,7 +3911,6 @@ __unregister_ftrace_function_probe(char
 		func_g.type = filter_parse_regex(glob, strlen(glob),
 						 &func_g.search, &not);
 		func_g.len = strlen(func_g.search);
-		func_g.search = glob;
 
 		/* we do not support '!' for function probes */
 		if (WARN_ON(not))

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[Shuah Khan]

On 02/15/2018 08:16 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.82 release.
> There are 88 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.82-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[kernelci.org bot]

stable-rc/linux-4.9.y boot: 98 boots: 0 failed, 93 passed with 5 offline (v4.9.81-89-gd521208d35b1)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.81-89-gd521208d35b1/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.81-89-gd521208d35b1/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.81-89-gd521208d35b1
Git Commit: d521208d35b18752ce67294386370c0dc6af5316
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 52 unique boards, 20 SoC families, 15 builds out of 183

Offline Platforms:

arm64:

    defconfig:
        meson-gxbb-odroidc2: 1 offline lab

arm:

    multi_v7_defconfig:
        exynos5410-odroidxu: 1 offline lab
        sun4i-a10-cubieboard: 1 offline lab

    sunxi_defconfig:
        sun4i-a10-cubieboard: 1 offline lab

    exynos_defconfig:
        exynos5410-odroidxu: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[Naresh Kamboju]

On 15 February 2018 at 20:46, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.9.82 release.
> There are 88 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.82-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

NOTE:
LTP getrusage04 fails intermittently and already have an old open bug.
LKFT: 4.9-rc: x15: LTP getrusage04 failed - stime increased > 6000us
(intermittent)
https://bugs.linaro.org/show_bug.cgi?id=3507

Summary
------------------------------------------------------------------------

kernel: 4.9.82-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: d521208d35b18752ce67294386370c0dc6af5316
git describe: v4.9.81-89-gd521208d35b1
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.81-89-gd521208d35b1

No regressions (compared to build v4.9.81-15-ge367c81f224a)
------------------------------------------------------------------------


Boards, architectures and test suites:
-------------------------------------

hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - skip: 24, pass: 40,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - skip: 1, pass: 21,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 4, pass: 10,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 151, pass: 999,
* ltp-timers-tests - skip: 1, pass: 12,

juno-r2 - arm64
* boot - pass: 20,
* kselftest - skip: 23, pass: 42,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 4, pass: 10,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 148, pass: 1002,
* ltp-timers-tests - skip: 1, pass: 12,

x15 - arm
* boot - pass: 20,
* kselftest - skip: 25, pass: 39,
* libhugetlbfs - skip: 1, pass: 87,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - skip: 2, pass: 20,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 1, pass: 13,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 97, pass: 1051, fail: 2
* ltp-timers-tests - skip: 1, pass: 12,

x86_64
* boot - pass: 20,
* kselftest - skip: 27, pass: 54,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 1, pass: 62,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 5, pass: 9,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 118, pass: 1032,
* ltp-timers-tests - skip: 1, pass: 12,

Documentation - https://collaborate.linaro.org/display/LKFT/Email+Reports
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[Guenter Roeck]

On 02/15/2018 07:16 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.82 release.
> There are 88 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 145 pass: 137 fail: 8
Failed builds:
	arm:allmodconfig
	powerpc:defconfig
	powerpc:allmodconfig
	powerpc:ppc64e_defconfig
	powerpc:cell_defconfig
	powerpc:maple_defconfig
	powerpc:ppc6xx_defconfig
	powerpc:mpc83xx_defconfig
Qemu test results:
	total: 126 pass: 119 fail: 7
Failed tests:
	powerpc:mpc8544ds:mpc85xx_defconfig
	powerpc:mpc8544ds:mpc85xx_smp_defconfig
	powerpc:mac99:ppc64_book3s_defconfig:nosmp
	powerpc:mac99:ppc64_book3s_defconfig:smp4
	powerpc:pseries:pseries_defconfig
	powerpc:mpc8544ds:ppc64_e5500_defconfig:nosmp
	powerpc:mpc8544ds:ppc64_e5500_defconfig:smp

Build failures:

Building arm:allmodconfig ... failed
--------------
Error log:

drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init':
drivers/clocksource/timer-stm32.c:191:2: error: implicit declaration of function 'kfree'

Building powerpc:defconfig ... failed
Building powerpc:allmodconfig ... failed
Building powerpc:ppc64e_defconfig ... failed
Building powerpc:cell_defconfig ... failed
Building powerpc:maple_defconfig ... failed
--------------
Error log:
arch/powerpc/kernel/entry_64.S: Assembler messages:
arch/powerpc/kernel/entry_64.S:260: Error: unrecognized opcode: `rfi_to_user'
arch/powerpc/kernel/entry_64.S:270: Error: unrecognized opcode: `rfi_to_kernel'
arch/powerpc/kernel/entry_64.S:885: Error: unrecognized opcode: `rfi_to_user'
build/arch/powerpc/kernel/entry_64.S:900: Error: unrecognized opcode: `rfi_to_kernel'

Building powerpc:ppc6xx_defconfig ... failed
Building powerpc:mpc83xx_defconfig ... failed
--------------
Error log:
drivers/crypto/talitos.c: In function 'talitos_sg_map':
drivers/crypto/talitos.c:1131:3: error: too many arguments to function 'to_talitos_ptr'

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[Greg Kroah-Hartman]

On Fri, Feb 16, 2018 at 06:19:46AM -0800, Guenter Roeck wrote:
> On 02/15/2018 07:16 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.82 release.
> > There are 88 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 145 pass: 137 fail: 8
> Failed builds:
> 	arm:allmodconfig
> 	powerpc:defconfig
> 	powerpc:allmodconfig
> 	powerpc:ppc64e_defconfig
> 	powerpc:cell_defconfig
> 	powerpc:maple_defconfig
> 	powerpc:ppc6xx_defconfig
> 	powerpc:mpc83xx_defconfig
> Qemu test results:
> 	total: 126 pass: 119 fail: 7
> Failed tests:
> 	powerpc:mpc8544ds:mpc85xx_defconfig
> 	powerpc:mpc8544ds:mpc85xx_smp_defconfig
> 	powerpc:mac99:ppc64_book3s_defconfig:nosmp
> 	powerpc:mac99:ppc64_book3s_defconfig:smp4
> 	powerpc:pseries:pseries_defconfig
> 	powerpc:mpc8544ds:ppc64_e5500_defconfig:nosmp
> 	powerpc:mpc8544ds:ppc64_e5500_defconfig:smp

Yeah, powerpc is b0rked :(

> Build failures:
> 
> Building arm:allmodconfig ... failed
> --------------
> Error log:
> 
> drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init':
> drivers/clocksource/timer-stm32.c:191:2: error: implicit declaration of function 'kfree'

Let me go track this one down.

> Building powerpc:defconfig ... failed
> Building powerpc:allmodconfig ... failed
> Building powerpc:ppc64e_defconfig ... failed
> Building powerpc:cell_defconfig ... failed
> Building powerpc:maple_defconfig ... failed
> --------------
> Error log:
> arch/powerpc/kernel/entry_64.S: Assembler messages:
> arch/powerpc/kernel/entry_64.S:260: Error: unrecognized opcode: `rfi_to_user'
> arch/powerpc/kernel/entry_64.S:270: Error: unrecognized opcode: `rfi_to_kernel'
> arch/powerpc/kernel/entry_64.S:885: Error: unrecognized opcode: `rfi_to_user'
> build/arch/powerpc/kernel/entry_64.S:900: Error: unrecognized opcode: `rfi_to_kernel'

This I know is broken, I think I have a fix somewhere, but haven't dug
through my mbox yet...

> Building powerpc:ppc6xx_defconfig ... failed
> Building powerpc:mpc83xx_defconfig ... failed
> --------------
> Error log:
> drivers/crypto/talitos.c: In function 'talitos_sg_map':
> drivers/crypto/talitos.c:1131:3: error: too many arguments to function 'to_talitos_ptr'

Offending patch is now dropped.

thanks,

greg k-h

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[Greg Kroah-Hartman]

On Fri, Feb 16, 2018 at 08:21:17PM +0100, Greg Kroah-Hartman wrote:
> On Fri, Feb 16, 2018 at 06:19:46AM -0800, Guenter Roeck wrote:
> > On 02/15/2018 07:16 AM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.9.82 release.
> > > There are 88 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
> > > Anything received after that time might be too late.
> > > 
> > 
> > Build results:
> > 	total: 145 pass: 137 fail: 8
> > Failed builds:
> > 	arm:allmodconfig
> > 	powerpc:defconfig
> > 	powerpc:allmodconfig
> > 	powerpc:ppc64e_defconfig
> > 	powerpc:cell_defconfig
> > 	powerpc:maple_defconfig
> > 	powerpc:ppc6xx_defconfig
> > 	powerpc:mpc83xx_defconfig
> > Qemu test results:
> > 	total: 126 pass: 119 fail: 7
> > Failed tests:
> > 	powerpc:mpc8544ds:mpc85xx_defconfig
> > 	powerpc:mpc8544ds:mpc85xx_smp_defconfig
> > 	powerpc:mac99:ppc64_book3s_defconfig:nosmp
> > 	powerpc:mac99:ppc64_book3s_defconfig:smp4
> > 	powerpc:pseries:pseries_defconfig
> > 	powerpc:mpc8544ds:ppc64_e5500_defconfig:nosmp
> > 	powerpc:mpc8544ds:ppc64_e5500_defconfig:smp
> 
> Yeah, powerpc is b0rked :(
> 
> > Build failures:
> > 
> > Building arm:allmodconfig ... failed
> > --------------
> > Error log:
> > 
> > drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init':
> > drivers/clocksource/timer-stm32.c:191:2: error: implicit declaration of function 'kfree'
> 
> Let me go track this one down.

Found this one, should be fixed, might be a while before I can push out
an updated tree, I'm on a train right now...

thanks,

greg k-h

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[Greg Kroah-Hartman]

On Fri, Feb 16, 2018 at 08:54:56PM +0100, Greg Kroah-Hartman wrote:
> On Fri, Feb 16, 2018 at 08:21:17PM +0100, Greg Kroah-Hartman wrote:
> > On Fri, Feb 16, 2018 at 06:19:46AM -0800, Guenter Roeck wrote:
> > > On 02/15/2018 07:16 AM, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.9.82 release.
> > > > There are 88 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > > 
> > > > Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
> > > > Anything received after that time might be too late.
> > > > 
> > > 
> > > Build results:
> > > 	total: 145 pass: 137 fail: 8
> > > Failed builds:
> > > 	arm:allmodconfig
> > > 	powerpc:defconfig
> > > 	powerpc:allmodconfig
> > > 	powerpc:ppc64e_defconfig
> > > 	powerpc:cell_defconfig
> > > 	powerpc:maple_defconfig
> > > 	powerpc:ppc6xx_defconfig
> > > 	powerpc:mpc83xx_defconfig
> > > Qemu test results:
> > > 	total: 126 pass: 119 fail: 7
> > > Failed tests:
> > > 	powerpc:mpc8544ds:mpc85xx_defconfig
> > > 	powerpc:mpc8544ds:mpc85xx_smp_defconfig
> > > 	powerpc:mac99:ppc64_book3s_defconfig:nosmp
> > > 	powerpc:mac99:ppc64_book3s_defconfig:smp4
> > > 	powerpc:pseries:pseries_defconfig
> > > 	powerpc:mpc8544ds:ppc64_e5500_defconfig:nosmp
> > > 	powerpc:mpc8544ds:ppc64_e5500_defconfig:smp
> > 
> > Yeah, powerpc is b0rked :(
> > 
> > > Build failures:
> > > 
> > > Building arm:allmodconfig ... failed
> > > --------------
> > > Error log:
> > > 
> > > drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init':
> > > drivers/clocksource/timer-stm32.c:191:2: error: implicit declaration of function 'kfree'
> > 
> > Let me go track this one down.
> 
> Found this one, should be fixed, might be a while before I can push out
> an updated tree, I'm on a train right now...

Now pushed out as -rc2.

thanks,

greg k-h

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[Guenter Roeck]

On Fri, Feb 16, 2018 at 09:25:21PM +0100, Greg Kroah-Hartman wrote:
> On Fri, Feb 16, 2018 at 08:54:56PM +0100, Greg Kroah-Hartman wrote:
> > On Fri, Feb 16, 2018 at 08:21:17PM +0100, Greg Kroah-Hartman wrote:
> > > On Fri, Feb 16, 2018 at 06:19:46AM -0800, Guenter Roeck wrote:
> > > > On 02/15/2018 07:16 AM, Greg Kroah-Hartman wrote:
> > > > > This is the start of the stable review cycle for the 4.9.82 release.
> > > > > There are 88 patches in this series, all will be posted as a response
> > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > let me know.
> > > > > 
> > > > > Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
> > > > > Anything received after that time might be too late.
> > > > > 
> > > > 
> > > > Build results:
> > > > 	total: 145 pass: 137 fail: 8
> > > > Failed builds:
> > > > 	arm:allmodconfig
> > > > 	powerpc:defconfig
> > > > 	powerpc:allmodconfig
> > > > 	powerpc:ppc64e_defconfig
> > > > 	powerpc:cell_defconfig
> > > > 	powerpc:maple_defconfig
> > > > 	powerpc:ppc6xx_defconfig
> > > > 	powerpc:mpc83xx_defconfig
> > > > Qemu test results:
> > > > 	total: 126 pass: 119 fail: 7
> > > > Failed tests:
> > > > 	powerpc:mpc8544ds:mpc85xx_defconfig
> > > > 	powerpc:mpc8544ds:mpc85xx_smp_defconfig
> > > > 	powerpc:mac99:ppc64_book3s_defconfig:nosmp
> > > > 	powerpc:mac99:ppc64_book3s_defconfig:smp4
> > > > 	powerpc:pseries:pseries_defconfig
> > > > 	powerpc:mpc8544ds:ppc64_e5500_defconfig:nosmp
> > > > 	powerpc:mpc8544ds:ppc64_e5500_defconfig:smp
> > > 
> > > Yeah, powerpc is b0rked :(
> > > 
> > > > Build failures:
> > > > 
> > > > Building arm:allmodconfig ... failed
> > > > --------------
> > > > Error log:
> > > > 
> > > > drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init':
> > > > drivers/clocksource/timer-stm32.c:191:2: error: implicit declaration of function 'kfree'
> > > 
> > > Let me go track this one down.
> > 
> > Found this one, should be fixed, might be a while before I can push out
> > an updated tree, I'm on a train right now...
> 
> Now pushed out as -rc2.
> 

I'll run another round of tests tonight and report the results tomorrow
morning. So far my builders only picked up an update in 4.9.y, but not
in 3.18.y or 4.14.y (just in case you forgot to push those).

Guenter

Re: [PATCH 4.9 00/88] 4.9.82-stable review

[Greg Kroah-Hartman]

On Fri, Feb 16, 2018 at 12:39:23PM -0800, Guenter Roeck wrote:
> On Fri, Feb 16, 2018 at 09:25:21PM +0100, Greg Kroah-Hartman wrote:
> > On Fri, Feb 16, 2018 at 08:54:56PM +0100, Greg Kroah-Hartman wrote:
> > > On Fri, Feb 16, 2018 at 08:21:17PM +0100, Greg Kroah-Hartman wrote:
> > > > On Fri, Feb 16, 2018 at 06:19:46AM -0800, Guenter Roeck wrote:
> > > > > On 02/15/2018 07:16 AM, Greg Kroah-Hartman wrote:
> > > > > > This is the start of the stable review cycle for the 4.9.82 release.
> > > > > > There are 88 patches in this series, all will be posted as a response
> > > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > > let me know.
> > > > > > 
> > > > > > Responses should be made by Sat Feb 17 15:11:46 UTC 2018.
> > > > > > Anything received after that time might be too late.
> > > > > > 
> > > > > 
> > > > > Build results:
> > > > > 	total: 145 pass: 137 fail: 8
> > > > > Failed builds:
> > > > > 	arm:allmodconfig
> > > > > 	powerpc:defconfig
> > > > > 	powerpc:allmodconfig
> > > > > 	powerpc:ppc64e_defconfig
> > > > > 	powerpc:cell_defconfig
> > > > > 	powerpc:maple_defconfig
> > > > > 	powerpc:ppc6xx_defconfig
> > > > > 	powerpc:mpc83xx_defconfig
> > > > > Qemu test results:
> > > > > 	total: 126 pass: 119 fail: 7
> > > > > Failed tests:
> > > > > 	powerpc:mpc8544ds:mpc85xx_defconfig
> > > > > 	powerpc:mpc8544ds:mpc85xx_smp_defconfig
> > > > > 	powerpc:mac99:ppc64_book3s_defconfig:nosmp
> > > > > 	powerpc:mac99:ppc64_book3s_defconfig:smp4
> > > > > 	powerpc:pseries:pseries_defconfig
> > > > > 	powerpc:mpc8544ds:ppc64_e5500_defconfig:nosmp
> > > > > 	powerpc:mpc8544ds:ppc64_e5500_defconfig:smp
> > > > 
> > > > Yeah, powerpc is b0rked :(
> > > > 
> > > > > Build failures:
> > > > > 
> > > > > Building arm:allmodconfig ... failed
> > > > > --------------
> > > > > Error log:
> > > > > 
> > > > > drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init':
> > > > > drivers/clocksource/timer-stm32.c:191:2: error: implicit declaration of function 'kfree'
> > > > 
> > > > Let me go track this one down.
> > > 
> > > Found this one, should be fixed, might be a while before I can push out
> > > an updated tree, I'm on a train right now...
> > 
> > Now pushed out as -rc2.
> > 
> 
> I'll run another round of tests tonight and report the results tomorrow
> morning. So far my builders only picked up an update in 4.9.y, but not
> in 3.18.y or 4.14.y (just in case you forgot to push those).

I didn't push those, they were "obvious" fixes :)

thanks,

greg k-h