From: Mesih Kilinc <mesihkilinc@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com
Cc: Mesih Kilinc <mesihkilinc@gmail.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
Russell King <linux@armlinux.org.uk>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Marc Zyngier <marc.zyngier@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Icenowy Zheng <icenowy@aosc.io>, Rob Herring <robh+dt@kernel.org>,
Julian Calaby <julian.calaby@gmail.com>
Subject: [RFC PATCH v4 00/17] initial support for "suniv" Allwinner new ARM9 SoC
Date: Sun, 25 Nov 2018 10:43:02 +0300 [thread overview]
Message-ID: <cover.1543131714.git.mesihkilinc@gmail.com> (raw)
This is the fourth version of RFC patchset for Allwinner ARMv5 F1C100s
SoC. Addressed comments from Maxime Ripard, added Acked-by signatures.
Changes since v3:
- Patch "ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs"
- Remove CONFIG_ARCH_SUNXI_Vx. Use ARCH_MULTI_Vx to differentiate SoC's
- Change KConfig ARCH_SUNXI selection: 'select' to 'default'.
- Patch "irqchip/sun4i: Add a struct to hold global variables"
- Split irq_sun4i.c changes to 3 patch.
- Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
- pinctrl-suniv-f1c100s: remove: disable_strict_mode = true
- Patch "ARM: dts: suniv: add initial DTSI file for F1C100s"
- suniv-f1c100s.dtsi: remove unnecessary componenets.
- Instead of patching drivers, add original compatible string with
f1c100s compatibles.
- Add Acked-by signatures.
Changes since v2:
- Patch "ARM: sunxi: add Allwinner ARMv5 SoCs"
- Move SUN4I_TIMER option to ARCH_SUNXI
- Added help text for MACH_SUNIV
- Patch "irqchip/sun4i: add support for suniv interrupt controller"
- Defined sunxi_irq_chip_data struct and used it to differentiate
registers between different chips.
- Patch " ARM: dts: suniv: add initial DTSI file for F1C100s"
- Removed unnecessary fake clock.
- Fixed compatible strings.
Changes since v1:
- Patch "ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7
Allwinner SoCs"
- Instead of using a common bool config use a common menuconfig.
- Use ARCH_MULTI_V7 to differentiate V7 SoCs.
- Addressed comment from Julian Calaby
- Patch "ARM: sunxi: add Allwinner ARMv5 SoCs"
- Use ARCH_MULTI_V5 to differentiate V5 SoCs.
- removed "allwinner,suniv" board compatible string
- Added dt-bindings
- Patch "irqchip/sun4i: add support for suniv interrupt controller"
- Added dt-bindings
- Changed "allwinner,suniv-ic" to "allwinner,suniv-f1c100s-ic"
- Patch "clocksource: sun4i: add a compatible for suniv"
- Added dt-bindings
- Changed "allwinner,suniv-timer" to "allwinner,suniv-f1c100s-timer"
- Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
- Added dt-bindings
- Renamed suniv-pinctrl to suniv-f1c100s-pinctrl
- Patch "clk: sunxi-ng: add support for suniv F1C100s SoC"
- Added dt-bindings
- Renamed suniv-ccu to suniv-f1c100s-ccu
- Patch "ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
- Addressed comment from Rask Ingemann Lambertsen
Thanks!
Mesih Kilinc (17):
ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs
dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC
ARM: sunxi: add Allwinner ARMv5 SoCs
dt-bindings: interrupt-controller: Add suniv interrupt-controller
irqchip/sun4i: Add a struct to hold global variables
irqchip/sun4i: Move IC specific register offsets to struct
irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s
dt-bindings: timer: Add Allwinner suniv timer
clocksource: sun4i: add a compatible for suniv
dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl
pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)
dt-bindings: clock: Add Allwinner suniv F1C100s CCU
clk: sunxi-ng: add support for suniv F1C100s SoC
dt-bindings: sram: Add Allwinner suniv F1C100s
dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt
ARM: dts: suniv: add initial DTSI file for F1C100s
ARM: suniv: f1c100s: add device tree for Lichee Pi Nano
Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
.../interrupt-controller/allwinner,sun4i-ic.txt | 4 +-
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
.../devicetree/bindings/sram/sunxi-sram.txt | 4 +
.../bindings/timer/allwinner,sun4i-timer.txt | 4 +-
.../devicetree/bindings/watchdog/sunxi-wdt.txt | 1 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 26 +
arch/arm/boot/dts/suniv-f1c100s.dtsi | 147 ++++++
arch/arm/mach-sunxi/Kconfig | 19 +-
arch/arm/mach-sunxi/sunxi.c | 10 +
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c | 536 +++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h | 34 ++
drivers/clocksource/sun4i_timer.c | 5 +-
drivers/irqchip/irq-sun4i.c | 106 ++--
drivers/pinctrl/sunxi/Kconfig | 4 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 416 ++++++++++++++++
include/dt-bindings/clock/suniv-ccu-f1c100s.h | 69 +++
include/dt-bindings/reset/suniv-ccu-f1c100s.h | 37 ++
23 files changed, 1401 insertions(+), 33 deletions(-)
create mode 100644 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi
create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
create mode 100644 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h
create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h
--
2.7.4
next reply other threads:[~2018-11-25 7:43 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-25 7:43 Mesih Kilinc [this message]
2018-11-25 7:43 ` [RFC PATCH v4 01/17] ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs Mesih Kilinc
2018-11-25 7:43 ` [RFC PATCH v4 02/17] dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC Mesih Kilinc
2018-11-26 22:48 ` Rob Herring
2018-11-25 7:43 ` [RFC PATCH v4 03/17] ARM: sunxi: add Allwinner ARMv5 SoCs Mesih Kilinc
2018-11-25 7:43 ` [RFC PATCH v4 04/17] dt-bindings: interrupt-controller: Add suniv interrupt-controller Mesih Kilinc
2018-11-26 22:49 ` Rob Herring
2018-11-25 7:43 ` [RFC PATCH v4 05/17] irqchip/sun4i: Add a struct to hold global variables Mesih Kilinc
2018-11-27 9:48 ` Maxime Ripard
2018-11-25 7:43 ` [RFC PATCH v4 06/17] irqchip/sun4i: Move IC specific register offsets to struct Mesih Kilinc
2018-11-27 9:49 ` Maxime Ripard
2018-11-25 7:43 ` [RFC PATCH v4 07/17] irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s Mesih Kilinc
2018-11-27 9:49 ` Maxime Ripard
2018-11-25 7:43 ` [RFC PATCH v4 08/17] dt-bindings: timer: Add Allwinner suniv timer Mesih Kilinc
2018-11-27 1:37 ` Rob Herring
2018-11-25 7:43 ` [RFC PATCH v4 09/17] clocksource: sun4i: add a compatible for suniv Mesih Kilinc
2018-11-25 7:43 ` [RFC PATCH v4 10/17] dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl Mesih Kilinc
2018-11-25 12:48 ` Linus Walleij
2018-11-25 7:43 ` [RFC PATCH v4 11/17] pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) Mesih Kilinc
2018-11-25 12:49 ` Linus Walleij
2018-11-25 7:43 ` [RFC PATCH v4 12/17] dt-bindings: clock: Add Allwinner suniv F1C100s CCU Mesih Kilinc
2018-11-27 1:39 ` Rob Herring
2018-11-25 7:43 ` [RFC PATCH v4 13/17] clk: sunxi-ng: add support for suniv F1C100s SoC Mesih Kilinc
2018-11-28 21:53 ` Stephen Boyd
2018-11-25 7:43 ` [RFC PATCH v4 14/17] dt-bindings: sram: Add Allwinner suniv F1C100s Mesih Kilinc
2018-11-27 1:39 ` Rob Herring
2018-11-25 7:43 ` [RFC PATCH v4 15/17] dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt Mesih Kilinc
2018-11-27 1:40 ` Rob Herring
2018-11-25 7:43 ` [RFC PATCH v4 16/17] ARM: dts: suniv: add initial DTSI file for F1C100s Mesih Kilinc
2018-11-27 9:59 ` Maxime Ripard
2018-11-25 7:43 ` [RFC PATCH v4 17/17] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano Mesih Kilinc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1543131714.git.mesihkilinc@gmail.com \
--to=mesihkilinc@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=julian.calaby@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).