From: pisa@cmp.felk.cvut.cz
To: linux-can@vger.kernel.org, devicetree@vger.kernel.org,
mkl@pengutronix.de, socketcan@hartkopp.net
Cc: wg@grandegger.com, davem@davemloft.net, robh+dt@kernel.org,
mark.rutland@arm.com, c.emde@osadl.org, armbru@redhat.com,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
martin.jerabek01@gmail.com, ondrej.ille@gmail.com,
jnovak@fel.cvut.cz, jara.beran@gmail.com, porazil@pikron.com,
Pavel Pisa <pisa@cmp.felk.cvut.cz>
Subject: [PATCH v4 0/6] CTU CAN FD open-source IP core SocketCAN driver, PCI, platform integration and documentation
Date: Mon, 3 Aug 2020 20:34:48 +0200 [thread overview]
Message-ID: <cover.1596408856.git.pisa@cmp.felk.cvut.cz> (raw)
From: Pavel Pisa <pisa@cmp.felk.cvut.cz>
This driver adds support for the CTU CAN FD open-source IP core.
More documentation and core sources at project page
(https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core).
The core integration to Xilinx Zynq system as platform driver
is available (https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top).
Implementation on Intel FPGA based PCI Express board is available
from project (https://gitlab.fel.cvut.cz/canbus/pcie-ctu_can_fd).
The CTU CAN FD core emulation send for review for QEMU mainline.
Development repository for QEMU emulation - ctu-canfd branch of
https://gitlab.fel.cvut.cz/canbus/qemu-canbus
More about CAN related projects used and developed at the Faculty
of the Electrical Engineering (http://www.fel.cvut.cz/en/)
of Czech Technical University (https://www.cvut.cz/en)
in Prague at http://canbus.pages.fel.cvut.cz/ .
Martin Jerabek (1):
can: ctucanfd: add support for CTU CAN FD open-source IP core - bus
independent part.
Pavel Pisa (5):
dt-bindings: vendor-prefix: add prefix for the Czech Technical
University in Prague.
dt-bindings: net: can: binding for CTU CAN FD open-source IP core.
can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support.
can: ctucanfd: CTU CAN FD open-source IP core - platform/SoC support.
docs: ctucanfd: CTU CAN FD open-source IP core documentation.
The version 4 changes:
- changes summary, 169 non-merge commits, 6 driver,
32 IP core sources enhancements and fixes, 58 tests
in master and about additional 30 iso-testbench
preparation branch.
- convert device-tree binding documentation to YAML
- QEMU model of CTU CAN FD IP core and generic extension
of QEMU CAN bus emulation developed by Jan Charvat.
- driver tested on QEMU emulated Malta big-endian MIPS
platform and big endian-support fixed.
- checkpatch from 5.4 kernel used to cleanup driver formatting
- header files generated from IP core IP-Xact description
updated to include protocol exception (pex) field.
Mechanism to set it from the driver is not provided yet.
The version 3 changes:
- sent at 2019-12-21
- adapts device tree bindings documentation according to
Rob Herring suggestions.
- the driver has been separated to individual modules for core support,
PCI bus integration and platform, SoC integration.
- the FPGA design has been cleaned up and CAN protocol FSM redesigned
by Ondrej Ille (the core redesign has been reason to pause attempts to driver
submission)
- the work from February 2019 on core, test framework and driver
1601 commits in total, 436 commits in the core sources, 144 commits
in the driver, 151 documentation, 502 in tests.
- not all continuous integration tests updated for latest design version yet
https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core/pipelines
- Zynq hardware in the loop test show no issues for after driver PCI and platform
separation and latest VHDL sources updates.
- driver code has been periodically tested on 4.18.5-rt3 and 4.19 long term
stable kernels.
- test of the patches before submission is run on 5.4 kernel
- the core has been integrated by Jaroslav Beran <jara.beran@gmail.com>
into Intel FPGA based SoC used in the tester developed for Skoda auto
at Department of Measurement, Faculty of Electrical Engineering,
Czech Technical University https://meas.fel.cvut.cz/ . He has contributed
feedback and fixes to the project.
The version 2 sent at 2019-02-27
The version 1 sent at 2019-02-22
Ondrej Ille has prepared the CTU CAN IP Core sources for new release.
We are waiting with it for the driver review, our intention
is to release IP when driver is reviewed and mainlined.
DKMS CTU CAN FD driver build by OpenBuildService to ease integration
into Debian systems when driver is not provided by the distribution
https://build.opensuse.org/package/show/home:ppisa/ctu_can_fd
Jan Charvat <charvj10@fel.cvut.cz> finished work to extend already
mainlined QEMU SJA1000 and SocketCAN support to provide even CAN FD
support and CTU CAN FD core support.
https://gitlab.fel.cvut.cz/canbus/qemu-canbus/-/tree/ctu-canfd
The patches has been sent for review to QEMU mainlining list.
Thanks in advance to all who help us to deliver the project into public.
Thanks to all colleagues, reviewers and other providing feedback,
infrastructure and enthusiasm and motivation for open-source work.
Build infrastructure and hardware is provided by
Department of Control Engineering,
Faculty of Electrical Engineering,
Czech Technical University in Prague
https://dce.fel.cvut.cz/en
.../devicetree/bindings/net/can/ctu,ctucanfd.yaml | 70 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
.../device_drivers/ctu/FSM_TXT_Buffer_user.png | Bin 0 -> 174807 bytes
.../device_drivers/ctu/ctucanfd-driver.rst | 635 +++++++++++
drivers/net/can/Kconfig | 1 +
drivers/net/can/Makefile | 1 +
drivers/net/can/ctucanfd/Kconfig | 38 +
drivers/net/can/ctucanfd/Makefile | 13 +
drivers/net/can/ctucanfd/ctu_can_fd.c | 1114 ++++++++++++++++++++
drivers/net/can/ctucanfd/ctu_can_fd.h | 88 ++
drivers/net/can/ctucanfd/ctu_can_fd_frame.h | 190 ++++
drivers/net/can/ctucanfd/ctu_can_fd_hw.c | 781 ++++++++++++++
drivers/net/can/ctucanfd/ctu_can_fd_hw.h | 917 ++++++++++++++++
drivers/net/can/ctucanfd/ctu_can_fd_pci.c | 316 ++++++
drivers/net/can/ctucanfd/ctu_can_fd_platform.c | 145 +++
drivers/net/can/ctucanfd/ctu_can_fd_regs.h | 972 +++++++++++++++++
16 files changed, 5283 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
create mode 100644 Documentation/networking/device_drivers/ctu/FSM_TXT_Buffer_user.png
create mode 100644 Documentation/networking/device_drivers/ctu/ctucanfd-driver.rst
create mode 100644 drivers/net/can/ctucanfd/Kconfig
create mode 100644 drivers/net/can/ctucanfd/Makefile
create mode 100644 drivers/net/can/ctucanfd/ctu_can_fd.c
create mode 100644 drivers/net/can/ctucanfd/ctu_can_fd.h
create mode 100644 drivers/net/can/ctucanfd/ctu_can_fd_frame.h
create mode 100644 drivers/net/can/ctucanfd/ctu_can_fd_hw.c
create mode 100644 drivers/net/can/ctucanfd/ctu_can_fd_hw.h
create mode 100644 drivers/net/can/ctucanfd/ctu_can_fd_pci.c
create mode 100644 drivers/net/can/ctucanfd/ctu_can_fd_platform.c
create mode 100644 drivers/net/can/ctucanfd/ctu_can_fd_regs.h
--
2.11.0
next reply other threads:[~2020-08-03 18:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-03 18:34 pisa [this message]
2020-08-03 18:34 ` [PATCH v4 1/6] dt-bindings: vendor-prefix: add prefix for the Czech Technical University in Prague pisa
2020-08-03 18:34 ` [PATCH v4 2/6] dt-bindings: net: can: binding for CTU CAN FD open-source IP core pisa
2020-08-04 9:18 ` Pavel Machek
2020-08-04 9:20 ` Pavel Machek
2020-08-06 14:47 ` Rob Herring
2020-08-06 15:53 ` Pavel Pisa
2020-08-06 14:43 ` Rob Herring
2020-08-03 18:34 ` [PATCH v4 3/6] can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part pisa
2020-08-04 9:57 ` Pavel Machek
2020-08-03 18:34 ` [PATCH v4 4/6] can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support pisa
2020-08-03 19:32 ` Randy Dunlap
2020-08-03 18:34 ` [PATCH v4 5/6] can: ctucanfd: CTU CAN FD open-source IP core - platform/SoC support pisa
2020-08-03 18:34 ` [PATCH v4 6/6] docs: ctucanfd: CTU CAN FD open-source IP core documentation pisa
2020-08-03 20:29 ` [PATCH v4 0/6] CTU CAN FD open-source IP core SocketCAN driver, PCI, platform integration and documentation Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1596408856.git.pisa@cmp.felk.cvut.cz \
--to=pisa@cmp.felk.cvut.cz \
--cc=armbru@redhat.com \
--cc=c.emde@osadl.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=jara.beran@gmail.com \
--cc=jnovak@fel.cvut.cz \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martin.jerabek01@gmail.com \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=ondrej.ille@gmail.com \
--cc=porazil@pikron.com \
--cc=robh+dt@kernel.org \
--cc=socketcan@hartkopp.net \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).