[PATCH v3 0/3] Add Support for Orange Pi 5

[PATCH v3 0/3] Add Support for Orange Pi 5

[Muhammed Efe Cetin]

Hi,

These series add initial support for Orange Pi 5 and SFC node for RK3588S.

Changes in v3:
* Remove cap-mmc-highspeed property from sdmmc.
* Make vcc_1v1_nldo_s3 an alias of dcdc-reg6 and add regulator-max-microvolt, regulator-min-microvolt properties.
* Make press-threshold-microvolt 1800 for recovery button.
* Remove assigned-clocks from sfc node.
* Drop some properties from sfc node in orangepi5 devicetree.
* Move snps reset properties to rgmii_phy1.

Changes in v2:
* Fix CHECK_DTBS warnings and add dtb to makefile.
* Remove assigned-clock-rates from sfc node and fix wrong interrupts property.
* Remove non-existent adc buttons and add button-recovery instead.
* Remove backlight_1, backlight, vcc12v_dcin, vcc5v0_usbdcin, vcc5v0_usb, combophy_avdd0v85, combophy_avdd1v8, sata0, u2phy0, u2phy0_otg nodes.
* Rename vcc3v3_pcie2x1l2 to vcc3v3_pcie20, vbus5v0_typec to vbus_typec.
* Remove regulator-always-on property from vcc_3v3_sd_s0 and vcc3v3_pcie20.

Muhammed Efe Cetin (3):
  dt-bindings: arm: rockchip: Add Orange Pi 5 board
  arm64: dts: rockchip: Add sfc node to rk3588s
  arm64: dts: rockchip: Add Orange Pi 5

 .../devicetree/bindings/arm/rockchip.yaml     |   5 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 673 ++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3588s.dtsi     |  11 +
 4 files changed, 690 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts

-- 
2.41.0

[PATCH v3 1/3] dt-bindings: arm: rockchip: Add Orange Pi 5 board

[Muhammed Efe Cetin]

Add Orange Pi 5 SBC from Xunlong.

Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index ca5389862887..b9649e27bc82 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -877,6 +877,11 @@ properties:
               - xunlong,orangepi-r1-plus-lts
           - const: rockchip,rk3328
 
+      - description: Xunlong Orange Pi 5
+        items:
+          - const: xunlong,orangepi-5
+          - const: rockchip,rk3588s
+
       - description: Zkmagic A95X Z2
         items:
           - const: zkmagic,a95x-z2
-- 
2.41.0

[PATCH v3 2/3] arm64: dts: rockchip: Add sfc node to rk3588s

[Muhammed Efe Cetin]

Add sfc node to rk3588s.dtsi from downstream kernel.

Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
---
 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 5544f66c6ff4..1a820a5a51eb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -1424,6 +1424,17 @@ sata-port@0 {
 		};
 	};
 
+	sfc: spi@fe2b0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xfe2b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sdmmc: mmc@fe2c0000 {
 		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe2c0000 0x0 0x4000>;
-- 
2.41.0

[PATCH v3 3/3] arm64: dts: rockchip: Add Orange Pi 5

[Muhammed Efe Cetin]

Add initial support for OPi5 that includes support for USB2, PCIe2, Sata,
Sdmmc, SPI Flash, PMIC.

Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
Reviewed-by: Ondřej Jirman <megi@xff.cz>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 673 ++++++++++++++++++
 2 files changed, 674 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index e7728007fd1b..c29386106b7a 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -105,3 +105,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
new file mode 100644
index 000000000000..cb80f42d8e87
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5";
+	compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 =<&leds_gpio>;
+
+		led-1 {
+			label = "status_led";
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1800>;
+		};
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sd_s0";
+		enable-active-low;
+		regulator-boot-on;
+		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vbus_typec: vbus_typec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_typec";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie20: vcc3v3-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie20";
+		enable-active-high;
+		regulator-boot-on;
+		startup-delay-us = <50000>;
+		gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+	mem-supply = <&vdd_cpu_big0_mem_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+	mem-supply = <&vdd_cpu_big0_mem_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+	mem-supply = <&vdd_cpu_big1_mem_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+	mem-supply = <&vdd_cpu_big1_mem_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+	mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+	mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+	mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+	mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	pinctrl-names = "default";
+	tx_delay = <0x42>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: vdd_npu_mem_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie20>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-func {
+		leds_gpio: leds-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_sd_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&fspim0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+				<&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
-- 
2.41.0

Re: [PATCH v3 1/3] dt-bindings: arm: rockchip: Add Orange Pi 5 board

[Dhruva Gole]

On Aug 21, 2023 at 18:47:57 +0300, Muhammed Efe Cetin wrote:
> Add Orange Pi 5 SBC from Xunlong.
> 
> Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index ca5389862887..b9649e27bc82 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -877,6 +877,11 @@ properties:
>                - xunlong,orangepi-r1-plus-lts
>            - const: rockchip,rk3328
>  
> +      - description: Xunlong Orange Pi 5
> +        items:
> +          - const: xunlong,orangepi-5
> +          - const: rockchip,rk3588s
> +

Reviewed-by: Dhruva Gole <d-gole@ti.com>

>        - description: Zkmagic A95X Z2
>          items:
>            - const: zkmagic,a95x-z2
> -- 
> 2.41.0
> 
> 

-- 
Best regards,
Dhruva Gole <d-gole@ti.com>

Re: [PATCH v3 2/3] arm64: dts: rockchip: Add sfc node to rk3588s

[Dhruva Gole]

On Aug 21, 2023 at 18:47:58 +0300, Muhammed Efe Cetin wrote:
> Add sfc node to rk3588s.dtsi from downstream kernel.

For those with lesser context, can you please mention what SFC means? I
did a quick grep on the compatible and that's how I got to know it's a
Serial Flash Controller

Also, not sure what you mean by downstream kernel, where is it located?
Why did you feel the need to mention it while upstreaming this patch?
Please can you provide more context or drop the downstream part
altogether?

> 
> Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
> ---
>  arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> index 5544f66c6ff4..1a820a5a51eb 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> @@ -1424,6 +1424,17 @@ sata-port@0 {
>  		};
>  	};
>  
> +	sfc: spi@fe2b0000 {
> +		compatible = "rockchip,sfc";
> +		reg = <0x0 0xfe2b0000 0x0 0x4000>;
> +		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>;
> +		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
> +		clock-names = "clk_sfc", "hclk_sfc";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
> +

Otherwise, looks okay.

Reviewed-by: Dhruva Gole <d-gole@ti.com>

>  	sdmmc: mmc@fe2c0000 {
>  		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
>  		reg = <0x0 0xfe2c0000 0x0 0x4000>;
> -- 
> 2.41.0
> 
> 

-- 
Best regards,
Dhruva Gole <d-gole@ti.com>

Re: [PATCH v3 3/3] arm64: dts: rockchip: Add Orange Pi 5

[Dhruva Gole]

Hi,

On Aug 21, 2023 at 18:47:59 +0300, Muhammed Efe Cetin wrote:
> Add initial support for OPi5 that includes support for USB2, PCIe2, Sata,
> Sdmmc, SPI Flash, PMIC.
> 
> Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
> Reviewed-by: Ondřej Jirman <megi@xff.cz>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 673 ++++++++++++++++++
>  2 files changed, 674 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
> 
...

Can you provide some sort of documentation on how I can build and boot
the kernel on this board? I was unable to use the upstream arm64
defconfig with this exact series applied to boot the board.

> +
> +&i2c6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c6m3_xfer>;
> +	status = "okay";
> +
> +	hym8563: rtc@51 {
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		#clock-cells = <0>;
> +		clock-output-names = "hym8563";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hym8563_int>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
> +		wakeup-source;

Are you able to actually use rtc as a wakeup source? I tried this
on a downstream kernel that I mention below..

rtcwake -s 10 -m mem

didn't actually seem to wake the device from deepsleep after 10 seconds.
Do you know what other pins I can use as wakeup sources?

> +	};
> +};
> +
> +&mdio1 {
> +	rgmii_phy1: ethernet-phy@1 {
> +		compatible = "ethernet-phy-ieee802.3-c22";

Just wondering, can you please give some logs of the board with eth
working? The image that I have from opi seems to fail eth? As in I am
not able to see any ip address. here are the logs:

https://gist.github.com/DhruvaG2000/eda2762e35013c8d5ac9f37e818103a3

...

-- 
Best regards,
Dhruva Gole <d-gole@ti.com>

Re: [PATCH v3 3/3] arm64: dts: rockchip: Add Orange Pi 5

[Muhammed Efe Cetin]

Hello,

On 28.09.2023 13:51, Dhruva Gole wrote:
> Hi,
> 
> On Aug 21, 2023 at 18:47:59 +0300, Muhammed Efe Cetin wrote:
>> Add initial support for OPi5 that includes support for USB2, PCIe2, Sata,
>> Sdmmc, SPI Flash, PMIC.
>>
>> Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
>> Reviewed-by: Ondřej Jirman <megi@xff.cz>
>> ---
>>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>>   .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 673 ++++++++++++++++++
>>   2 files changed, 674 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
>>
> ...
> 
> Can you provide some sort of documentation on how I can build and boot
> the kernel on this board? I was unable to use the upstream arm64
> defconfig with this exact series applied to boot the board.

What was wrong when you tried to compile & boot the board? Can you provide some logs?

> 
>> +
>> +&i2c6 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&i2c6m3_xfer>;
>> +	status = "okay";
>> +
>> +	hym8563: rtc@51 {
>> +		compatible = "haoyu,hym8563";
>> +		reg = <0x51>;
>> +		#clock-cells = <0>;
>> +		clock-output-names = "hym8563";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&hym8563_int>;
>> +		interrupt-parent = <&gpio0>;
>> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
>> +		wakeup-source;
> 
> Are you able to actually use rtc as a wakeup source? I tried this
> on a downstream kernel that I mention below..
> 
> rtcwake -s 10 -m mem
> 
> didn't actually seem to wake the device from deepsleep after 10 seconds.
> Do you know what other pins I can use as wakeup sources?

No, i've not tried it before.

> 
>> +	};
>> +};
>> +
>> +&mdio1 {
>> +	rgmii_phy1: ethernet-phy@1 {
>> +		compatible = "ethernet-phy-ieee802.3-c22";
> 
> Just wondering, can you please give some logs of the board with eth
> working? The image that I have from opi seems to fail eth? As in I am
> not able to see any ip address. here are the logs:
> 
> https://gist.github.com/DhruvaG2000/eda2762e35013c8d5ac9f37e818103a3

Unfortunately the board is not near me currently. However, i was able to use GMAC ethernet in both the upstreram and downstream kernels. Did you try any images other than Orange Pi ones?

> 
> ...
> 

Re: [PATCH v3 3/3] arm64: dts: rockchip: Add Orange Pi 5

[Dhruva Gole]

Hello,

On Oct 05, 2023 at 16:54:04 +0300, Muhammed Efe Cetin wrote:
> Hello,
> 
> On 28.09.2023 13:51, Dhruva Gole wrote:
> > Hi,
> > 
> > On Aug 21, 2023 at 18:47:59 +0300, Muhammed Efe Cetin wrote:
> >> Add initial support for OPi5 that includes support for USB2, PCIe2, Sata,
> >> Sdmmc, SPI Flash, PMIC.
> >>
> >> Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
> >> Reviewed-by: Ondřej Jirman <megi@xff.cz>
> >> ---
> >>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> >>   .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 673 ++++++++++++++++++
> >>   2 files changed, 674 insertions(+)
> >>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
> >>
> > ...
> > 
> > Can you provide some sort of documentation on how I can build and boot
> > the kernel on this board? I was unable to use the upstream arm64
> > defconfig with this exact series applied to boot the board.
> 
> What was wrong when you tried to compile & boot the board? Can you provide some logs?

Umm don't have logs at hand, but I remember it didn't really reach the
linux first line either, it went into sort of a bootloop just after
the uboot stage.

> 
> > 
> >> +
> >> +&i2c6 {
> >> +	pinctrl-names = "default";
> >> +	pinctrl-0 = <&i2c6m3_xfer>;
> >> +	status = "okay";
> >> +
> >> +	hym8563: rtc@51 {
> >> +		compatible = "haoyu,hym8563";
> >> +		reg = <0x51>;
> >> +		#clock-cells = <0>;
> >> +		clock-output-names = "hym8563";
> >> +		pinctrl-names = "default";
> >> +		pinctrl-0 = <&hym8563_int>;
> >> +		interrupt-parent = <&gpio0>;
> >> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
> >> +		wakeup-source;
> > 
> > Are you able to actually use rtc as a wakeup source? I tried this
> > on a downstream kernel that I mention below..
> > 
> > rtcwake -s 10 -m mem
> > 
> > didn't actually seem to wake the device from deepsleep after 10 seconds.
> > Do you know what other pins I can use as wakeup sources?
> 
> No, i've not tried it before.

ah okay

> 
> > 
> >> +	};
> >> +};
> >> +
> >> +&mdio1 {
> >> +	rgmii_phy1: ethernet-phy@1 {
> >> +		compatible = "ethernet-phy-ieee802.3-c22";
> > 
> > Just wondering, can you please give some logs of the board with eth
> > working? The image that I have from opi seems to fail eth? As in I am
> > not able to see any ip address. here are the logs:
> > 
> > https://gist.github.com/DhruvaG2000/eda2762e35013c8d5ac9f37e818103a3
> 
> Unfortunately the board is not near me currently. However, i was able to use GMAC ethernet in both the upstreram and downstream kernels. Did you try any images other than Orange Pi ones?

Nope, are there any other images that maybe more suitable? Please can you point me to them?

> 
> > 
> > ...
> > 
> 

-- 
Best regards,
Dhruva Gole <d-gole@ti.com>

Re: [PATCH v3 3/3] arm64: dts: rockchip: Add Orange Pi 5

[Muhammed Efe Cetin]

Hi,

On 9.10.2023 08:40, Dhruva Gole wrote:
> Hello,
> 
> On Oct 05, 2023 at 16:54:04 +0300, Muhammed Efe Cetin wrote:
>> Hello,
>>
>> On 28.09.2023 13:51, Dhruva Gole wrote:
>>> Hi,
>>>
>>> On Aug 21, 2023 at 18:47:59 +0300, Muhammed Efe Cetin wrote:
>>>> Add initial support for OPi5 that includes support for USB2, PCIe2, Sata,
>>>> Sdmmc, SPI Flash, PMIC.
>>>>
>>>> Signed-off-by: Muhammed Efe Cetin <efectn@6tel.net>
>>>> Reviewed-by: Ondřej Jirman <megi@xff.cz>
>>>> ---
>>>>    arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>>>>    .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 673 ++++++++++++++++++
>>>>    2 files changed, 674 insertions(+)
>>>>    create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
>>>>
>>> ...
>>>
>>> Can you provide some sort of documentation on how I can build and boot
>>> the kernel on this board? I was unable to use the upstream arm64
>>> defconfig with this exact series applied to boot the board.
>>
>> What was wrong when you tried to compile & boot the board? Can you provide some logs?
> 
> Umm don't have logs at hand, but I remember it didn't really reach the
> linux first line either, it went into sort of a bootloop just after
> the uboot stage.

Hmm there might be issue with your uboot compilation. It'd be better if you provide useful logs.

> 
>>
>>>
>>>> +
>>>> +&i2c6 {
>>>> +	pinctrl-names = "default";
>>>> +	pinctrl-0 = <&i2c6m3_xfer>;
>>>> +	status = "okay";
>>>> +
>>>> +	hym8563: rtc@51 {
>>>> +		compatible = "haoyu,hym8563";
>>>> +		reg = <0x51>;
>>>> +		#clock-cells = <0>;
>>>> +		clock-output-names = "hym8563";
>>>> +		pinctrl-names = "default";
>>>> +		pinctrl-0 = <&hym8563_int>;
>>>> +		interrupt-parent = <&gpio0>;
>>>> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
>>>> +		wakeup-source;
>>>
>>> Are you able to actually use rtc as a wakeup source? I tried this
>>> on a downstream kernel that I mention below..
>>>
>>> rtcwake -s 10 -m mem
>>>
>>> didn't actually seem to wake the device from deepsleep after 10 seconds.
>>> Do you know what other pins I can use as wakeup sources?
>>
>> No, i've not tried it before.
> 
> ah okay
> 
>>
>>>
>>>> +	};
>>>> +};
>>>> +
>>>> +&mdio1 {
>>>> +	rgmii_phy1: ethernet-phy@1 {
>>>> +		compatible = "ethernet-phy-ieee802.3-c22";
>>>
>>> Just wondering, can you please give some logs of the board with eth
>>> working? The image that I have from opi seems to fail eth? As in I am
>>> not able to see any ip address. here are the logs:
>>>
>>> https://gist.github.com/DhruvaG2000/eda2762e35013c8d5ac9f37e818103a3
>>
>> Unfortunately the board is not near me currently. However, i was able to use GMAC ethernet in both the upstreram and downstream kernels. Did you try any images other than Orange Pi ones?
> 
> Nope, are there any other images that maybe more suitable? Please can you point me to them?

You can check the images below the Third Party Images section in OPi's download page. GMAC should work properly with most of them.

> 
>>
>>>
>>> ...
>>>
>>
>