linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Taniya Das <tdas@codeaurora.org>
To: quic_vamslank@quicinc.com, agross@kernel.org,
	bjorn.andersson@linaro.org, mturquette@baylibre.com,
	sboyd@kernel.org, robh+dt@kernel.org, tglx@linutronix.de,
	maz@kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 2/6] clk: qcom: Add new PLL type for SDX65
Date: Fri, 30 Jul 2021 06:05:09 +0530	[thread overview]
Message-ID: <d16d6364-7596-1a88-59f0-b4662bd7fa93@codeaurora.org> (raw)
In-Reply-To: <223a1d8020d50c35ff2621f95d69b4a626b6893b.1626986805.git.quic_vamslank@quicinc.com>



On 7/23/2021 2:39 AM, quic_vamslank@quicinc.com wrote:
> From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
> 
> Add a new PLL type for SDX65 SoC from Qualcomm.
> 
> Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
> ---
>   drivers/clk/qcom/clk-alpha-pll.c | 170 +++++++++++++++++++++++++++++++
>   drivers/clk/qcom/clk-alpha-pll.h |   4 +
>   2 files changed, 174 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index c6eb99169ddc..93c8917b7273 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -1,5 +1,6 @@
>   // SPDX-License-Identifier: GPL-2.0
>   /*
> + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
>    * Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
>    */
>   
> @@ -126,6 +127,20 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
>   		[PLL_OFF_TEST_CTL_U] = 0x1c,
>   		[PLL_OFF_STATUS] = 0x2c,
>   	},
> +        [CLK_ALPHA_PLL_TYPE_LUCID_EVO] = {
> +                [PLL_OFF_OPMODE] = 0x04,
> +                [PLL_OFF_STATUS] = 0x0c,
> +                [PLL_OFF_L_VAL] = 0x10,
> +                [PLL_OFF_ALPHA_VAL] = 0x14,
> +                [PLL_OFF_USER_CTL] = 0x18,
> +                [PLL_OFF_USER_CTL_U] = 0x1c,
> +                [PLL_OFF_CONFIG_CTL] = 0x20,
> +                [PLL_OFF_CONFIG_CTL_U] = 0x24,
> +                [PLL_OFF_CONFIG_CTL_U1] = 0x28,
> +                [PLL_OFF_TEST_CTL] = 0x2c,
> +                [PLL_OFF_TEST_CTL_U] = 0x30,
> +                [PLL_OFF_TEST_CTL_U1] = 0x34,
> +        },
>   };
>   EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>   
> @@ -155,12 +170,14 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>   
>   /* LUCID PLL specific settings and offsets */
>   #define LUCID_PCAL_DONE		BIT(27)
> +#define LUCID_EVO_PLL_L_VAL_MASK        GENMASK(15, 0)
>   
>   /* LUCID 5LPE PLL specific settings and offsets */
>   #define LUCID_5LPE_PCAL_DONE		BIT(11)
>   #define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
>   #define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
>   #define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
Please add a comment

/* LUCID EVO PLL specific settings and offsets */
> +#define LUCID_EVO_ENABLE_VOTE_RUN       BIT(25)
>   
>   #define pll_alpha_width(p)					\
>   		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
> @@ -1777,3 +1794,156 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
>   	.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
>   };
>   EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
> +
> +static int alpha_pll_lucid_evo_enable(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return ret;
> +
> +	/* If in FSM mode, just vote for it */
> +	if (val & LUCID_EVO_ENABLE_VOTE_RUN) {
> +		ret = clk_enable_regmap(hw);
> +		if (ret)
> +			return ret;
> +		return wait_for_pll_enable_lock(pll);
> +	}
> +
> +	/* Check if PLL is already enabled */
> +	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
> +	if (ret < 0)
> +		return ret;
> +	else if (ret) {
> +		pr_warn("%s PLL is already enabled\n",
> +				clk_hw_get_name(&pll->clkr.hw));
> +		return 0;
> +	}
> +
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
> +			PLL_RESET_N, PLL_RESET_N);
> +	if (ret)
> +		return ret;
> +
> +	/* Set operation mode to RUN */
> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
> +
> +	ret = wait_for_pll_enable_lock(pll);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable the PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> +			PLL_OUT_MASK, PLL_OUT_MASK);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable the global PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
> +			PLL_OUTCTRL, PLL_OUTCTRL);
> +	if (ret)
> +		return ret;
> +
> +	/* Ensure that the write above goes through before returning. */
> +	mb();
> +	return ret;
> +}
> +
> +static void alpha_pll_lucid_evo_disable(struct clk_hw *hw)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return;
> +
> +	/* If in FSM mode, just unvote it */
> +	if (val & LUCID_EVO_ENABLE_VOTE_RUN) {
> +		clk_disable_regmap(hw);
> +		return;
> +	}
> +
> +	/* Disable the global PLL output */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
> +			PLL_OUTCTRL, 0);
> +	if (ret)
> +		return;
> +
> +	/* Disable the PLL outputs */
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> +			PLL_OUT_MASK, 0);
> +	if (ret)
> +		return;
> +
> +	/* Place the PLL mode in STANDBY */
> +	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll),
> +			PLL_STANDBY);
> +}
> +
> +static unsigned long alpha_pll_lucid_evo_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> +	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> +	u32 l, frac;
> +
> +	regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
> +	l &= LUCID_EVO_PLL_L_VAL_MASK;
> +	regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &frac);
> +
> +	return alpha_pll_calc_rate(parent_rate, l, frac, ALPHA_REG_16BIT_WIDTH);

Can you please use "pll_alpha_width(pll)".

> +}
> +
> +static int clk_lucid_evo_pll_postdiv_set_rate(struct clk_hw *hw,
> +		unsigned long rate, unsigned long parent_rate)
> +{
> +	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> +	int i, val = 0, div, ret;

'val' not required to be initialized.

> +
> +	/*
> +	 * If the PLL is in FSM mode, then treat set_rate callback as a
> +	 * no-operation.
> +	 */
> +	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val & LUCID_EVO_ENABLE_VOTE_RUN)
> +		return 0;
> +
> +	if (!pll->post_div_table) {
> +		pr_err("Missing the post_div_table for the PLL\n");
> +		return -EINVAL;
> +	}
> +
> +	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> +	for (i = 0; i < pll->num_post_div; i++) {
> +		if (pll->post_div_table[i].div == div) {
> +			val = pll->post_div_table[i].val;
> +			break;
> +		}
> +	}
> +
> +	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> +			(BIT(pll->width) - 1) << pll->post_div_shift,
> +			val << pll->post_div_shift);
> +}
> +
> +const struct clk_ops clk_alpha_pll_fixed_lucid_evo_ops = {
> +	.enable = alpha_pll_lucid_evo_enable,
> +	.disable = alpha_pll_lucid_evo_disable,
> +	.is_enabled = clk_trion_pll_is_enabled,
> +	.recalc_rate = alpha_pll_lucid_evo_recalc_rate,
> +	.round_rate = clk_alpha_pll_round_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_lucid_evo_ops);
> +
> +const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops = {
> +	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
> +	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
> +	.set_rate = clk_lucid_evo_pll_postdiv_set_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_evo_ops);
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index 6943e933be0f..c42299bf6f6f 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -16,6 +16,7 @@ enum {
>   	CLK_ALPHA_PLL_TYPE_TRION,
>   	CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
>   	CLK_ALPHA_PLL_TYPE_AGERA,
> +	CLK_ALPHA_PLL_TYPE_LUCID_EVO,
>   	CLK_ALPHA_PLL_TYPE_MAX,
>   };
>   
> @@ -148,6 +149,9 @@ extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
>   extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
>   extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
>   
> +extern const struct clk_ops clk_alpha_pll_fixed_lucid_evo_ops;
> +extern const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops;
> +
>   void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>   			     const struct alpha_pll_config *config);
>   void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> 

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

  reply	other threads:[~2021-07-30  0:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-22 21:09 [PATCH v2 0/6] Add Pdc, GCC and RPMh clock support for SDX65 quic_vamslank
2021-07-22 21:09 ` [PATCH v2 1/6] dt-bindings: clock: Add SDX65 GCC clock bindings quic_vamslank
2021-07-23 14:31   ` Rob Herring
2021-07-22 21:09 ` [PATCH v2 2/6] clk: qcom: Add new PLL type for SDX65 quic_vamslank
2021-07-30  0:35   ` Taniya Das [this message]
2021-07-30  2:39   ` Vinod Koul
2021-07-22 21:09 ` [PATCH v2 3/6] clk: qcom: Add SDX65 GCC support quic_vamslank
2021-07-22 21:09 ` [PATCH v2 4/6] dt-bindings: clock: Introduce RPMHCC bindings for SDX65 quic_vamslank
2021-07-29 20:07   ` Rob Herring
2021-07-22 21:09 ` [PATCH v2 5/6] clk: qcom: Add support for SDX65 RPMh clocks quic_vamslank
2021-07-30  0:41   ` Taniya Das
2021-07-22 21:09 ` [PATCH v2 6/6] dt-bindings: clock: Introduce pdc bindings for SDX65 quic_vamslank
2021-07-29 20:08   ` Rob Herring
2021-07-31  7:46   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d16d6364-7596-1a88-59f0-b4662bd7fa93@codeaurora.org \
    --to=tdas@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=quic_vamslank@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).