Re: [PATCH v5 07/22] media: camss: Add support for VFE hardware version Titan 170

[Andrey Konovalov <andrey.konovalov@linaro.org>]

Hi Robert,

On 22.02.2021 19:37, Robert Foss wrote:
> On Sat, 20 Feb 2021 at 22:40, Andrey Konovalov
> <andrey.konovalov@linaro.org> wrote:
>>
>> Hi Robert,
>>
>> Thank you for your patch!
>>
>> On 17.02.2021 14:21, Robert Foss wrote:
>>> Add register definitions for version 170 of the Titan architecture
>>> and implement support for the RDI output mode.
>>>
>>> The RDI mode as opposed to the PIX output mode for the VFE unit does
>>> not support any ISP functionality. This means essentially only
>>> supporting dumping the output of the whatever the CSI decoder receives
>>> from the sensor.
>>>
>>> For example will a sensor outputting YUV pixel format frames, only
>>> allow the VFE to dump those frames as they are received by the ISP
>>> to memory through the RDI interface.
>>>
>>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
>>> ---
>>>
>>>
>>> Changes since v1:
>>>    - Andrey: Remove commented out chunk
>>>    - Remove left over WIP comments
>>>
>>> Changes since v4:
>>>    - Andrey: Remove traces of PIX support
>>>    - Andrey: Fix vfe_global_reset() overwriting reset command
>>>    - Remove unused variable
>>>
>>>
>>>
>>>    drivers/media/platform/qcom/camss/Makefile    |   1 +
>>>    .../media/platform/qcom/camss/camss-vfe-170.c | 790 ++++++++++++++++++
>>>    drivers/media/platform/qcom/camss/camss-vfe.c |  47 +-
>>>    drivers/media/platform/qcom/camss/camss-vfe.h |  26 +-
>>>    .../media/platform/qcom/camss/camss-video.c   |  52 ++
>>>    drivers/media/platform/qcom/camss/camss.c     |  61 ++
>>>    6 files changed, 957 insertions(+), 20 deletions(-)
>>>    create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c
>>>
>>> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
>>> index 940c0ae3e003..052c4f405fa3 100644
>>> --- a/drivers/media/platform/qcom/camss/Makefile
>>> +++ b/drivers/media/platform/qcom/camss/Makefile
>>> @@ -11,6 +11,7 @@ qcom-camss-objs += \
>>>                camss-vfe-4-1.o \
>>>                camss-vfe-4-7.o \
>>>                camss-vfe-4-8.o \
>>> +             camss-vfe-170.o \
>>>                camss-vfe-gen1.o \
>>>                camss-vfe.o \
>>>                camss-video.o \
>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
>>> new file mode 100644
>>> index 000000000000..c4991b1f22f8
>>> --- /dev/null
>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
>>> @@ -0,0 +1,790 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * camss-vfe-4-7.c
>>> + *
>>> + * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.7
>>> + *
>>> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
>>> + * Copyright (C) 2015-2018 Linaro Ltd.
>>
>> - it looks like the header comes from v4.7 without updating to Titan 170
> 
> Gotcha, thanks!
> 
>>
>>> + */
>>> +
>>> +#include <linux/delay.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/io.h>
>>> +#include <linux/iopoll.h>
>>> +
>>> +#include "camss.h"
>>> +#include "camss-vfe.h"
>>> +
>>> +#define VFE_HW_VERSION                               (0x000)
>>> +
>>> +#define VFE_GLOBAL_RESET_CMD                 (0x018)
>>> +#define              GLOBAL_RESET_CMD_CORE           BIT(0)
>>> +#define              GLOBAL_RESET_CMD_CAMIF          BIT(1)
>>> +#define              GLOBAL_RESET_CMD_BUS            BIT(2)
>>> +#define              GLOBAL_RESET_CMD_BUS_BDG        BIT(3)
>>> +#define              GLOBAL_RESET_CMD_REGISTER       BIT(4)
>>> +#define              GLOBAL_RESET_CMD_PM             BIT(5)
>>> +#define              GLOBAL_RESET_CMD_BUS_MISR       BIT(6)
>>> +#define              GLOBAL_RESET_CMD_TESTGEN        BIT(7)
>>> +#define              GLOBAL_RESET_CMD_DSP            BIT(8)
>>> +#define              GLOBAL_RESET_CMD_IDLE_CGC       BIT(9)
>>> +#define              GLOBAL_RESET_CMD_RDI0           BIT(10)
>>> +#define              GLOBAL_RESET_CMD_RDI1           BIT(11)
>>> +#define              GLOBAL_RESET_CMD_RDI2           BIT(12)
>>> +#define              GLOBAL_RESET_CMD_RDI3           BIT(13)
>>> +#define              GLOBAL_RESET_CMD_VFE_DOMAIN     BIT(30)
>>> +#define              GLOBAL_RESET_CMD_RESET_BYPASS   BIT(31)
>>> +
>>> +
>>> +#define VFE_CORE_CFG                         (0x050)
>>> +#define              CFG_PIXEL_PATTERN_YCBYCR        (0x4)
>>> +#define              CFG_PIXEL_PATTERN_YCRYCB        (0x5)
>>> +#define              CFG_PIXEL_PATTERN_CBYCRY        (0x6)
>>> +#define              CFG_PIXEL_PATTERN_CRYCBY        (0x7)
>>> +#define              CFG_COMPOSITE_REG_UPDATE_EN     BIT(4)
>>> +
>>> +#define VFE_IRQ_CMD                          (0x058)
>>> +#define              CMD_GLOBAL_CLEAR                BIT(0)
>>> +
>>> +#define VFE_IRQ_MASK_0                                       (0x05c)
>>> +#define              MASK_0_CAMIF_SOF                        BIT(0)
>>> +#define              MASK_0_CAMIF_EOF                        BIT(1)
>>> +#define              MASK_0_RDI_REG_UPDATE(n)                BIT((n) + 5)
>>> +#define              MASK_0_IMAGE_MASTER_n_PING_PONG(n)      BIT((n) + 8)
>>> +#define              MASK_0_IMAGE_COMPOSITE_DONE_n(n)        BIT((n) + 25)
>>> +#define              MASK_0_RESET_ACK                        BIT(31)
>>> +
>>> +#define VFE_IRQ_MASK_1                                       (0x060)
>>> +#define              MASK_1_CAMIF_ERROR                      BIT(0)
>>> +#define              MASK_1_VIOLATION                        BIT(7)
>>> +#define              MASK_1_BUS_BDG_HALT_ACK                 BIT(8)
>>> +#define              MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n)   BIT((n) + 9)
>>> +#define              MASK_1_RDI_SOF(n)                       BIT((n) + 29)
>>> +
>>> +#define VFE_IRQ_CLEAR_0                                      (0x064)
>>> +#define VFE_IRQ_CLEAR_1                                      (0x068)
>>> +
>>> +#define VFE_IRQ_STATUS_0                             (0x06c)
>>> +#define              STATUS_0_CAMIF_SOF                      BIT(0)
>>> +#define              STATUS_0_RDI_REG_UPDATE(n)              BIT((n) + 5)
>>> +#define              STATUS_0_IMAGE_MASTER_PING_PONG(n)      BIT((n) + 8)
>>> +#define              STATUS_0_IMAGE_COMPOSITE_DONE(n)        BIT((n) + 25)
>>> +#define              STATUS_0_RESET_ACK                      BIT(31)
>>> +
>>> +#define VFE_IRQ_STATUS_1                             (0x070)
>>> +#define              STATUS_1_VIOLATION                      BIT(7)
>>> +#define              STATUS_1_BUS_BDG_HALT_ACK               BIT(8)
>>> +#define              STATUS_1_RDI_SOF(n)                     BIT((n) + 27)
>>> +
>>> +#define VFE_VIOLATION_STATUS                 (0x07c)
>>> +
>>> +#define VFE_CAMIF_CMD                                (0x478)
>>> +#define              CMD_CLEAR_CAMIF_STATUS          BIT(2)
>>> +
>>> +#define VFE_CAMIF_CFG                                (0x47c)
>>> +#define              CFG_VSYNC_SYNC_EDGE             (0)
>>> +#define                      VSYNC_ACTIVE_HIGH       (0)
>>> +#define                      VSYNC_ACTIVE_LOW        (1)
>>> +#define              CFG_HSYNC_SYNC_EDGE             (1)
>>> +#define                      HSYNC_ACTIVE_HIGH       (0)
>>> +#define                      HSYNC_ACTIVE_LOW        (1)
>>> +#define              CFG_VFE_SUBSAMPLE_ENABLE        BIT(4)
>>> +#define              CFG_BUS_SUBSAMPLE_ENABLE        BIT(5)
>>> +#define              CFG_VFE_OUTPUT_EN               BIT(6)
>>> +#define              CFG_BUS_OUTPUT_EN               BIT(7)
>>> +#define              CFG_BINNING_EN                  BIT(9)
>>> +#define              CFG_FRAME_BASED_EN              BIT(10)
>>> +#define              CFG_RAW_CROP_EN                 BIT(22)
>>> +
>>> +// XXX different, don't exist in TITAN register docs
>>> +#define VFE_0_CAMIF_FRAME_CFG                        0x484
>>> +#define VFE_0_CAMIF_WINDOW_WIDTH_CFG         0x488
>>> +#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG                0x48c
>>> +#define VFE_0_CAMIF_SUBSAMPLE_CFG            0x490
>>> +#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN    0x498
>>> +#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN    0x49c
>>> +#define VFE_0_CAMIF_STATUS                   0x4a4
>>> +#define VFE_0_CAMIF_STATUS_HALT                      BIT(31)
>>> +#define CAMIF_TIMEOUT_SLEEP_US 1000
>>> +#define CAMIF_TIMEOUT_ALL_US 1000000
>>> +
>>> +#define VFE_REG_UPDATE_CMD                   (0x4ac)
>>> +#define              REG_UPDATE_RDI(n)               BIT(1 + (n))
>>> +
>>> +
>>> +#define VFE_BUS_IRQ_MASK(n)          (0x2044 + (n) * 4)
>>> +#define VFE_BUS_IRQ_CLEAR(n)         (0x2050 + (n) * 4)
>>> +
>>> +#define VFE_BUS_IRQ_STATUS(n)                (0x205c + (n) * 4)
>>> +#define              STATUS0_COMP_RESET_DONE         BIT(0)
>>> +#define              STATUS0_COMP_REG_UPDATE0_DONE   BIT(1)
>>> +#define              STATUS0_COMP_REG_UPDATE1_DONE   BIT(2)
>>> +#define              STATUS0_COMP_REG_UPDATE2_DONE   BIT(3)
>>> +#define              STATUS0_COMP_REG_UPDATE3_DONE   BIT(4)
>>> +#define              STATUS0_COMP_REG_UPDATE_DONE(n) BIT(n + 1)
>>> +#define              STATUS0_COMP0_BUF_DONE          BIT(5)
>>> +#define              STATUS0_COMP1_BUF_DONE          BIT(6)
>>> +#define              STATUS0_COMP2_BUF_DONE          BIT(7)
>>> +#define              STATUS0_COMP3_BUF_DONE          BIT(8)
>>> +#define              STATUS0_COMP4_BUF_DONE          BIT(9)
>>> +#define              STATUS0_COMP5_BUF_DONE          BIT(10)
>>> +#define              STATUS0_COMP_BUF_DONE(n)        BIT(n + 5)
>>> +#define              STATUS0_COMP_ERROR              BIT(11)
>>> +#define              STATUS0_COMP_OVERWRITE          BIT(12)
>>> +#define              STATUS0_OVERFLOW                BIT(13)
>>> +#define              STATUS0_VIOLATION               BIT(14)
>>> +/* WM_CLIENT_BUF_DONE defined for buffers 0:19 */
>>> +#define              STATUS1_WM_CLIENT_BUF_DONE(n)           BIT(n)
>>> +#define              STATUS1_EARLY_DONE                      BIT(24)
>>> +#define              STATUS2_DUAL_COMP0_BUF_DONE             BIT(0)
>>> +#define              STATUS2_DUAL_COMP1_BUF_DONE             BIT(1)
>>> +#define              STATUS2_DUAL_COMP2_BUF_DONE             BIT(2)
>>> +#define              STATUS2_DUAL_COMP3_BUF_DONE             BIT(3)
>>> +#define              STATUS2_DUAL_COMP4_BUF_DONE             BIT(4)
>>> +#define              STATUS2_DUAL_COMP5_BUF_DONE             BIT(5)
>>> +#define              STATUS2_DUAL_COMP_BUF_DONE(n)           BIT(n)
>>> +#define              STATUS2_DUAL_COMP_ERROR                 BIT(6)
>>> +#define              STATUS2_DUAL_COMP_OVERWRITE             BIT(7)
>>> +
>>> +#define VFE_BUS_IRQ_CLEAR_GLOBAL             (0x2068)
>>> +
>>> +#define VFE_BUS_WM_DEBUG_STATUS_CFG          (0x226c)
>>> +#define              DEBUG_STATUS_CFG_STATUS0(n)     BIT(n)
>>> +#define              DEBUG_STATUS_CFG_STATUS1(n)     BIT(8+n)
>>> +
>>> +#define VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER    (0x2080)
>>> +
>>> +#define VFE_BUS_WM_ADDR_SYNC_NO_SYNC         (0x2084)
>>> +#define              BUS_VER2_MAX_CLIENTS (24)
>>> +#define              WM_ADDR_NO_SYNC_DEFAULT_VAL \
>>> +                             ((1 << BUS_VER2_MAX_CLIENTS) - 1)
>>> +
>>> +#define VFE_BUS_WM_CGC_OVERRIDE                      (0x200c)
>>> +#define              WM_CGC_OVERRIDE_ALL             (0xFFFFF)
>>> +
>>> +#define VFE_BUS_WM_TEST_BUS_CTRL             (0x211c)
>>> +
>>> +#define VFE_BUS_WM_STATUS0(n)                        (0x2200 + (n) * 0x100)
>>> +#define VFE_BUS_WM_STATUS1(n)                        (0x2204 + (n) * 0x100)
>>> +#define VFE_BUS_WM_CFG(n)                    (0x2208 + (n) * 0x100)
>>> +#define              WM_CFG_EN                       (0)
>>> +#define              WM_CFG_MODE                     (1)
>>> +#define                      MODE_QCOM_PLAIN (0)
>>> +#define                      MODE_MIPI_RAW   (1)
>>> +#define              WM_CFG_VIRTUALFRAME             (2)
>>> +#define VFE_BUS_WM_HEADER_ADDR(n)            (0x220c + (n) * 0x100)
>>> +#define VFE_BUS_WM_HEADER_CFG(n)             (0x2210 + (n) * 0x100)
>>> +#define VFE_BUS_WM_IMAGE_ADDR(n)             (0x2214 + (n) * 0x100)
>>> +#define VFE_BUS_WM_IMAGE_ADDR_OFFSET(n)              (0x2218 + (n) * 0x100)
>>> +#define VFE_BUS_WM_BUFFER_WIDTH_CFG(n)               (0x221c + (n) * 0x100)
>>> +#define              WM_BUFFER_DEFAULT_WIDTH         (0xFF01)
>>> +
>>> +#define VFE_BUS_WM_BUFFER_HEIGHT_CFG(n)              (0x2220 + (n) * 0x100)
>>> +#define VFE_BUS_WM_PACKER_CFG(n)             (0x2224 + (n) * 0x100)
>>> +
>>> +#define VFE_BUS_WM_STRIDE(n)                 (0x2228 + (n) * 0x100)
>>> +#define              WM_STRIDE_DEFAULT_STRIDE        (0xFF01)
>>> +
>>> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)   (0x2248 + (n) * 0x100)
>>> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)  (0x224c + (n) * 0x100)
>>> +#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)               (0x2250 + (n) * 0x100)
>>> +#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)              (0x2254 + (n) * 0x100)
>>> +#define VFE_BUS_WM_FRAME_INC(n)                      (0x2258 + (n) * 0x100)
>>> +#define VFE_BUS_WM_BURST_LIMIT(n)            (0x225c + (n) * 0x100)
>>> +
>>> +
>>> +static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
>>> +{
>>> +     u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
>>> +
>>> +     u32 gen = (hw_version >> 28) & 0xF;
>>> +     u32 rev = (hw_version >> 16) & 0xFFF;
>>> +     u32 step = hw_version & 0xFFFF;
>>> +
>>> +     dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
>>> +}
>>> +
>>> +static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
>>> +{
>>> +     u32 bits = readl_relaxed(vfe->base + reg);
>>> +
>>> +     writel_relaxed(bits & ~clr_bits, vfe->base + reg);
>>> +}
>>> +
>>> +static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
>>> +{
>>> +     u32 bits = readl_relaxed(vfe->base + reg);
>>> +
>>> +     writel_relaxed(bits | set_bits, vfe->base + reg);
>>> +}
>>> +
>>> +static void vfe_global_reset(struct vfe_device *vfe)
>>> +{
>>> +     u32 reset_bits = GLOBAL_RESET_CMD_CORE          |
>>> +                      GLOBAL_RESET_CMD_CAMIF         |
>>> +                      GLOBAL_RESET_CMD_BUS           |
>>> +                      GLOBAL_RESET_CMD_REGISTER      |
>>> +                      GLOBAL_RESET_CMD_PM            |
>>> +                      GLOBAL_RESET_CMD_BUS_MISR      |
>>> +                      GLOBAL_RESET_CMD_IDLE_CGC      |
>>> +                      GLOBAL_RESET_CMD_RDI0          |
>>> +                      GLOBAL_RESET_CMD_RDI1          |
>>> +                      GLOBAL_RESET_CMD_RDI2;
>>
>> - so the reset_bits is set to 0x00001E77 in v5.
>>
>> In v4 the reset_bits was set to 0x00003F9F which corresponds to:
>>
>>          GLOBAL_RESET_CMD_CORE           |
>>          GLOBAL_RESET_CMD_CAMIF          |
>>          GLOBAL_RESET_CMD_BUS            |
>>          GLOBAL_RESET_CMD_BUS_BDG        |
>>          GLOBAL_RESET_CMD_REGISTER       |
>>          GLOBAL_RESET_CMD_TESTGEN        |
>>          GLOBAL_RESET_CMD_DSP            |
>>          GLOBAL_RESET_CMD_IDLE_CGC       |
>>          GLOBAL_RESET_CMD_RDI0           |
>>          GLOBAL_RESET_CMD_RDI1           |
>>          GLOBAL_RESET_CMD_RDI2           |
>>          GLOBAL_RESET_CMD_RDI3;
>>
>> So the difference between v4 and v5 is:
>>
>> reset in v4, not reset in v5:
>>          GLOBAL_RESET_CMD_BUS_BDG
>>          GLOBAL_RESET_CMD_TESTGEN
>>          GLOBAL_RESET_CMD_DSP
>>
>> reset in v5, not reset in v4:
>>          GLOBAL_RESET_CMD_PM
>>          GLOBAL_RESET_CMD_BUS_MISR
>>
>> - correct?
>>
>>     It is probably worth a few words in the v4 vs v5 changelog.
>>
>>     (dropping GLOBAL_RESET_CMD_RDI3 in v5 is clear - Titan 170 has only RDI0 to RDI2
>>     according to the driver code)
>>
> 
> Great catch! I made a mistake with the bit-ordering after doing a
> hex->binary translation.
> I'll straighten this out in v6.
> 
>>> +
>>> +     writel_relaxed(BIT(31), vfe->base + VFE_IRQ_MASK_0);
>>> +
>>> +     /* Make sure IRQ mask has been written before resetting */
>>> +     wmb();
>>> +
>>> +     writel_relaxed(reset_bits, vfe->base + VFE_GLOBAL_RESET_CMD);
>>> +}
>>> +
>>> +static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
>>> +{
>>> +     u32 val;
>>> +
>>> +     /*Set Debug Registers*/
>>> +     val = DEBUG_STATUS_CFG_STATUS0(1) |
>>> +           DEBUG_STATUS_CFG_STATUS0(7);
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_DEBUG_STATUS_CFG);
>>> +
>>> +     /* BUS_WM_INPUT_IF_ADDR_SYNC_FRAME_HEADER */
>>> +     writel_relaxed(0, vfe->base + VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER);
>>> +
>>> +     /* no clock gating at bus input */
>>> +     val = WM_CGC_OVERRIDE_ALL;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
>>> +
>>> +     writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
>>> +
>>> +     /* if addr_no_sync has default value then config the addr no sync reg */
>>> +     val = WM_ADDR_NO_SYNC_DEFAULT_VAL;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_ADDR_SYNC_NO_SYNC);
>>> +
>>> +     writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));
>>> +
>>> +     val = WM_BUFFER_DEFAULT_WIDTH;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_WIDTH_CFG(wm));
>>> +
>>> +     val = 0;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_HEIGHT_CFG(wm));
>>> +
>>> +     val = 0;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?
>>> +
>>> +     /* Configure stride for RDIs */
>>> +     //val = pix->plane_fmt[0].bytesperline;
>>> +     val = WM_STRIDE_DEFAULT_STRIDE;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));
>>> +
>>> +     /* Enable WM */
>>> +     val = 1 << WM_CFG_EN |
>>> +           MODE_MIPI_RAW << WM_CFG_MODE;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CFG(wm));
>>> +}
>>> +
>>> +static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
>>> +{
>>> +     /* Disable WM */
>>> +     writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));
>>> +}
>>> +
>>> +static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
>>> +                       struct vfe_line *line)
>>> +{
>>> +     struct v4l2_pix_format_mplane *pix =
>>> +             &line->video_out.active_fmt.fmt.pix_mp;
>>> +     u32 stride = pix->plane_fmt[0].bytesperline;
>>> +
>>> +     writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
>>> +     writel_relaxed(stride * pix->height, vfe->base + VFE_BUS_WM_FRAME_INC(wm));
>>> +}
>>> +
>>> +static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
>>> +{
>>> +     vfe->reg_update |= REG_UPDATE_RDI(line_id);
>>> +
>>> +     /* Enforce ordering between previous reg writes and reg update */
>>> +     wmb();
>>> +
>>> +     writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);
>>> +
>>> +     /* Enforce ordering between reg update and subsequent reg writes */
>>> +     wmb();
>>> +}
>>> +
>>> +static inline void vfe_reg_update_clear(struct vfe_device *vfe,
>>> +                                     enum vfe_line_id line_id)
>>> +{
>>> +     vfe->reg_update &= ~REG_UPDATE_RDI(line_id);
>>> +}
>>> +
>>> +static void vfe_enable_irq_common(struct vfe_device *vfe)
>>> +{
>>> +     vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
>>> +     vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
>>> +
>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));
>>
>> Looking at the #defines in the beginning of this file, only part
>> of the IRQ sources (not the whole 32 per each register) are used
>> or defined.
>>
>> Is it safe to unmask the unused (reserved?) bits in the above 5
>> IRQ mask registers?
> 
> Unfortunately this register is not defined at all in any documentation
> of the downstream[1] kernel, so I think the situation is actually a
> bit worse than what you've pointed out here.
> I'd like to remove the register defines above since I don't have a
> reliable source for them. But I would like to keep the register writes
> just as they are since that seems to work.
> 
> What are your thoughts?

Without having the documentation, using the known good writes is fine.
Removing the unused defines is also good.

Thanks,
Andrey

> [1] https://git.linaro.org/people/robert.foss/linux.git/log/?h=msm_sdm845
> 
>>
>>> +}
>>> +
>>> +static void vfe_isr_halt_ack(struct vfe_device *vfe)
>>> +{
>>> +     complete(&vfe->halt_complete);
>>> +}
>>> +
>>> +static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
>>> +{
>>> +     *status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
>>> +     *status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
>>> +
>>> +     writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
>>> +     writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
>>> +
>>> +     /* Enforce ordering between IRQ Clear and Global IRQ Clear */
>>> +     wmb();
>>> +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
>>> +}
>>> +
>>> +static void vfe_violation_read(struct vfe_device *vfe)
>>> +{
>>> +     u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
>>> +
>>> +     pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
>>> +}
>>> +
>>> +/*
>>> + * vfe_isr - VFE module interrupt handler
>>> + * @irq: Interrupt line
>>> + * @dev: VFE device
>>> + *
>>> + * Return IRQ_HANDLED on success
>>> + */
>>> +static irqreturn_t vfe_isr(int irq, void *dev)
>>> +{
>>> +     struct vfe_device *vfe = dev;
>>> +     u32 status0, status1, vfe_bus_status[3];
>>> +     int i, wm;
>>> +
>>> +     status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
>>> +     status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
>>> +
>>> +     writel_relaxed(status0, vfe->base + VFE_IRQ_CLEAR_0);
>>> +     writel_relaxed(status1, vfe->base + VFE_IRQ_CLEAR_1);
>>> +
>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++) {
>>> +             vfe_bus_status[i] = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(i));
>>> +             writel_relaxed(vfe_bus_status[i], vfe->base + VFE_BUS_IRQ_CLEAR(i));
>>> +     }
>>> +
>>> +     /* Enforce ordering between IRQ reading and interpretation */
>>> +     wmb();
>>> +
>>> +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
>>> +     writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
>>> +
>>> +     if (status0 & STATUS_0_RESET_ACK)
>>> +             vfe->isr_ops.reset_ack(vfe);
>>> +
>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
>>> +             if (status0 & STATUS_0_RDI_REG_UPDATE(i))
>>> +                     vfe->isr_ops.reg_update(vfe, i);
>>> +
>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
>>> +             if (status0 & STATUS_1_RDI_SOF(i))
>>> +                     vfe->isr_ops.sof(vfe, i);
>>> +
>>> +     for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
>>> +             if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
>>> +                     vfe->isr_ops.comp_done(vfe, i);
>>> +
>>> +     for (wm = 0; wm < MSM_VFE_IMAGE_MASTERS_NUM; wm++)
>>> +             if (status0 & BIT(9))
>>> +                     if (vfe_bus_status[1] & STATUS1_WM_CLIENT_BUF_DONE(wm))
>>> +                             vfe->isr_ops.wm_done(vfe, wm);
>>> +
>>> +     return IRQ_HANDLED;
>>> +}
>>> +
>>> +/*
>>> + * vfe_halt - Trigger halt on VFE module and wait to complete
>>> + * @vfe: VFE device
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +static int vfe_halt(struct vfe_device *vfe)
>>> +{
>>> +     unsigned long time;
>>> +
>>> +     return 0;
>>> +
>>> +     reinit_completion(&vfe->halt_complete);
>>> +
>>> +     time = wait_for_completion_timeout(&vfe->halt_complete,
>>> +             msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
>>> +     if (!time) {
>>> +             dev_err(vfe->camss->dev, "VFE halt timeout\n");
>>> +             return -EIO;
>>> +     }
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static int vfe_get_output(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     struct vfe_output *output;
>>> +     unsigned long flags;
>>> +     int i;
>>> +     int wm_idx;
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +
>>> +     output = &line->output;
>>> +     if (output->state != VFE_OUTPUT_OFF) {
>>> +             dev_err(vfe->camss->dev, "Output is running\n");
>>> +             goto error;
>>> +     }
>>> +
>>> +     output->wm_num = 1;
>>> +
>>> +     for (i = 0; i < output->wm_num; i++) {
>>
>> - this for loop can now be omitted ("for (i = 0; i < 1; i++)" is just one pass) ...
> 
> Ack.
> 
>>
>>> +             wm_idx = vfe_reserve_wm(vfe, line->id);
>>> +             if (wm_idx < 0) {
>>> +                     dev_err(vfe->camss->dev, "Can not reserve wm\n");
>>> +                     goto error_get_wm;
>>> +             }
>>> +             output->wm_idx[i] = wm_idx;
>>> +     }
>>> +
>>> +     output->drop_update_idx = 0;
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return 0;
>>> +
>>> +error_get_wm:
>>> +     for (i--; i >= 0; i--)
>>
>> - ... and this one too. And the "i" local var is no longer needed.
> 
> Ack
> 
>>
>> Thanks,
>> Andrey
>>
>>> +             vfe_release_wm(vfe, output->wm_idx[i]);
>>> +     output->state = VFE_OUTPUT_OFF;
>>> +error:
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return -EINVAL;
>>> +}
>>> +
>>> +static int vfe_enable_output(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     struct vfe_output *output = &line->output;
>>> +     const struct vfe_hw_ops *ops = vfe->ops;
>>> +     struct media_entity *sensor;
>>> +     unsigned long flags;
>>> +     unsigned int frame_skip = 0;
>>> +     unsigned int i;
>>> +
>>> +     sensor = camss_find_sensor(&line->subdev.entity);
>>> +     if (sensor) {
>>> +             struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
>>> +
>>> +             v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
>>> +             /* Max frame skip is 29 frames */
>>> +             if (frame_skip > VFE_FRAME_DROP_VAL - 1)
>>> +                     frame_skip = VFE_FRAME_DROP_VAL - 1;
>>> +     }
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +
>>> +     ops->reg_update_clear(vfe, line->id);
>>> +
>>> +     if (output->state != VFE_OUTPUT_OFF) {
>>> +             dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
>>> +                     output->state);
>>> +             spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +             return -EINVAL;
>>> +     }
>>> +
>>> +     WARN_ON(output->gen2.active_num);
>>> +
>>> +     output->state = VFE_OUTPUT_ON;
>>> +
>>> +     output->sequence = 0;
>>> +     output->wait_reg_update = 0;
>>> +     reinit_completion(&output->reg_update);
>>> +
>>> +     vfe_wm_start(vfe, output->wm_idx[0], line);
>>> +
>>> +     for (i = 0; i < 2; i++) {
>>> +             output->buf[i] = vfe_buf_get_pending(output);
>>> +             if (!output->buf[i])
>>> +                     break;
>>> +             output->gen2.active_num++;
>>> +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
>>> +     }
>>> +
>>> +     ops->reg_update(vfe, line->id);
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static int vfe_disable_output(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     struct vfe_output *output = &line->output;
>>> +     unsigned long flags;
>>> +     unsigned int i;
>>> +     bool done;
>>> +     int timeout = 0;
>>> +
>>> +     do {
>>> +             spin_lock_irqsave(&vfe->output_lock, flags);
>>> +             done = !output->gen2.active_num;
>>> +             spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +             usleep_range(10000, 20000);
>>> +
>>> +             if (timeout++ == 100) {
>>> +                     dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
>>> +                     vfe_reset(vfe);
>>> +                     output->gen2.active_num = 0;
>>> +                     return 0;
>>> +             }
>>> +     } while (!done);
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +     for (i = 0; i < output->wm_num; i++)
>>> +             vfe_wm_stop(vfe, output->wm_idx[i]);
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +/*
>>> + * vfe_enable - Enable streaming on VFE line
>>> + * @line: VFE line
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +static int vfe_enable(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     int ret;
>>> +
>>> +     mutex_lock(&vfe->stream_lock);
>>> +
>>> +     if (!vfe->stream_count)
>>> +             vfe_enable_irq_common(vfe);
>>> +
>>> +     vfe->stream_count++;
>>> +
>>> +     mutex_unlock(&vfe->stream_lock);
>>> +
>>> +     ret = vfe_get_output(line);
>>> +     if (ret < 0)
>>> +             goto error_get_output;
>>> +
>>> +     ret = vfe_enable_output(line);
>>> +     if (ret < 0)
>>> +             goto error_enable_output;
>>> +
>>> +     vfe->was_streaming = 1;
>>> +
>>> +     return 0;
>>> +
>>> +
>>> +error_enable_output:
>>> +     vfe_put_output(line);
>>> +
>>> +error_get_output:
>>> +     mutex_lock(&vfe->stream_lock);
>>> +
>>> +     vfe->stream_count--;
>>> +
>>> +     mutex_unlock(&vfe->stream_lock);
>>> +
>>> +     return ret;
>>> +}
>>> +
>>> +/*
>>> + * vfe_disable - Disable streaming on VFE line
>>> + * @line: VFE line
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +static int vfe_disable(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +
>>> +     vfe_disable_output(line);
>>> +
>>> +     vfe_put_output(line);
>>> +
>>> +     mutex_lock(&vfe->stream_lock);
>>> +
>>> +     vfe->stream_count--;
>>> +
>>> +     mutex_unlock(&vfe->stream_lock);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +/*
>>> + * vfe_isr_sof - Process start of frame interrupt
>>> + * @vfe: VFE Device
>>> + * @line_id: VFE line
>>> + */
>>> +static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
>>> +{
>>> +
>>> +}
>>> +
>>> +/*
>>> + * vfe_isr_reg_update - Process reg update interrupt
>>> + * @vfe: VFE Device
>>> + * @line_id: VFE line
>>> + */
>>> +static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
>>> +{
>>> +     struct vfe_output *output;
>>> +     unsigned long flags;
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +     vfe->ops->reg_update_clear(vfe, line_id);
>>> +
>>> +     output = &vfe->line[line_id].output;
>>> +
>>> +     if (output->wait_reg_update) {
>>> +             output->wait_reg_update = 0;
>>> +             complete(&output->reg_update);
>>> +     }
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +}
>>> +
>>> +/*
>>> + * vfe_isr_wm_done - Process write master done interrupt
>>> + * @vfe: VFE Device
>>> + * @wm: Write master id
>>> + */
>>> +static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
>>> +{
>>> +     struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
>>> +     struct camss_buffer *ready_buf;
>>> +     struct vfe_output *output;
>>> +     unsigned long flags;
>>> +     u32 index;
>>> +     u64 ts = ktime_get_ns();
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +
>>> +     if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
>>> +             dev_err_ratelimited(vfe->camss->dev,
>>> +                                 "Received wm done for unmapped index\n");
>>> +             goto out_unlock;
>>> +     }
>>> +     output = &vfe->line[vfe->wm_output_map[wm]].output;
>>> +
>>> +     ready_buf = output->buf[0];
>>> +     if (!ready_buf) {
>>> +             dev_err_ratelimited(vfe->camss->dev,
>>> +                                 "Missing ready buf %d!\n", output->state);
>>> +             goto out_unlock;
>>> +     }
>>> +
>>> +     ready_buf->vb.vb2_buf.timestamp = ts;
>>> +     ready_buf->vb.sequence = output->sequence++;
>>> +
>>> +     index = 0;
>>> +     output->buf[0] = output->buf[1];
>>> +     if (output->buf[0])
>>> +             index = 1;
>>> +
>>> +     output->buf[index] = vfe_buf_get_pending(output);
>>> +
>>> +     if (output->buf[index])
>>> +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
>>> +     else
>>> +             output->gen2.active_num--;
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
>>> +
>>> +     return;
>>> +
>>> +out_unlock:
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +}
>>> +
>>> +/*
>>> + * vfe_queue_buffer - Add empty buffer
>>> + * @vid: Video device structure
>>> + * @buf: Buffer to be enqueued
>>> + *
>>> + * Add an empty buffer - depending on the current number of buffers it will be
>>> + * put in pending buffer queue or directly given to the hardware to be filled.
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +static int vfe_queue_buffer(struct camss_video *vid,
>>> +                         struct camss_buffer *buf)
>>> +{
>>> +     struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     struct vfe_output *output;
>>> +     unsigned long flags;
>>> +
>>> +     output = &line->output;
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +
>>> +     if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
>>> +             output->buf[output->gen2.active_num++] = buf;
>>> +             vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
>>> +     } else {
>>> +             vfe_buf_add_pending(output, buf);
>>> +     }
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +const struct vfe_isr_ops vfe_isr_ops_170 = {
>>> +     .reset_ack = vfe_isr_reset_ack,
>>> +     .halt_ack = vfe_isr_halt_ack,
>>> +     .reg_update = vfe_isr_reg_update,
>>> +     .sof = vfe_isr_sof,
>>> +     .comp_done = vfe_isr_comp_done,
>>> +     .wm_done = vfe_isr_wm_done,
>>> +};
>>> +
>>> +static const struct camss_video_ops vfe_video_ops_170 = {
>>> +     .queue_buffer = vfe_queue_buffer,
>>> +     .flush_buffers = vfe_flush_buffers,
>>> +};
>>> +
>>> +static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
>>> +{
>>> +     vfe->isr_ops = vfe_isr_ops_170;
>>> +     vfe->video_ops = vfe_video_ops_170;
>>> +
>>> +     vfe->line_num = VFE_LINE_NUM_GEN2;
>>> +}
>>> +
>>> +const struct vfe_hw_ops vfe_ops_170 = {
>>> +     .global_reset = vfe_global_reset,
>>> +     .hw_version_read = vfe_hw_version_read,
>>> +     .isr_read = vfe_isr_read,
>>> +     .isr = vfe_isr,
>>> +     .reg_update_clear = vfe_reg_update_clear,
>>> +     .reg_update = vfe_reg_update,
>>> +     .subdev_init = vfe_subdev_init,
>>> +     .vfe_disable = vfe_disable,
>>> +     .vfe_enable = vfe_enable,
>>> +     .vfe_halt = vfe_halt,
>>> +     .violation_read = vfe_violation_read,
>>> +};
>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
>>> index 375843bd16af..6fafeb8a5484 100644
>>> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
>>> @@ -96,6 +96,32 @@ static const struct vfe_format formats_pix_8x96[] = {
>>>        { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
>>>    };
>>>
>>> +static const struct vfe_format formats_rdi_845[] = {
>>> +     { MEDIA_BUS_FMT_UYVY8_2X8, 8 },
>>> +     { MEDIA_BUS_FMT_VYUY8_2X8, 8 },
>>> +     { MEDIA_BUS_FMT_YUYV8_2X8, 8 },
>>> +     { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
>>> +     { MEDIA_BUS_FMT_SBGGR8_1X8, 8 },
>>> +     { MEDIA_BUS_FMT_SGBRG8_1X8, 8 },
>>> +     { MEDIA_BUS_FMT_SGRBG8_1X8, 8 },
>>> +     { MEDIA_BUS_FMT_SRGGB8_1X8, 8 },
>>> +     { MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_SGBRG10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_SGRBG10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16 },
>>> +     { MEDIA_BUS_FMT_SBGGR12_1X12, 12 },
>>> +     { MEDIA_BUS_FMT_SGBRG12_1X12, 12 },
>>> +     { MEDIA_BUS_FMT_SGRBG12_1X12, 12 },
>>> +     { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
>>> +     { MEDIA_BUS_FMT_SBGGR14_1X14, 14 },
>>> +     { MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
>>> +     { MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
>>> +     { MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
>>> +     { MEDIA_BUS_FMT_Y10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },
>>> +};
>>> +
>>>    /*
>>>     * vfe_get_bpp - map media bus format to bits per pixel
>>>     * @formats: supported media bus formats array
>>> @@ -192,7 +218,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>>>                        return sink_code;
>>>                }
>>>        else if (vfe->camss->version == CAMSS_8x96 ||
>>> -              vfe->camss->version == CAMSS_660)
>>> +              vfe->camss->version == CAMSS_660 ||
>>> +              vfe->camss->version == CAMSS_845)
>>>                switch (sink_code) {
>>>                case MEDIA_BUS_FMT_YUYV8_2X8:
>>>                {
>>> @@ -256,13 +283,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>>>                return 0;
>>>    }
>>>
>>> -/*
>>> - * vfe_reset - Trigger reset on VFE module and wait to complete
>>> - * @vfe: VFE device
>>> - *
>>> - * Return 0 on success or a negative error code otherwise
>>> - */
>>> -static int vfe_reset(struct vfe_device *vfe)
>>> +int vfe_reset(struct vfe_device *vfe)
>>>    {
>>>        unsigned long time;
>>>
>>> @@ -429,7 +450,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)
>>>                struct camss_clock *clock = &vfe->clock[i];
>>>
>>>                if (!strcmp(clock->name, "vfe0") ||
>>> -                 !strcmp(clock->name, "vfe1")) {
>>> +                 !strcmp(clock->name, "vfe1") ||
>>> +                 !strcmp(clock->name, "vfe_lite")) {
>>>                        u64 min_rate = 0;
>>>                        long rate;
>>>
>>> @@ -1268,6 +1290,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>>>        case CAMSS_660:
>>>                vfe->ops = &vfe_ops_4_8;
>>>                break;
>>> +
>>> +     case CAMSS_845:
>>> +             vfe->ops = &vfe_ops_170;
>>> +             break;
>>>        default:
>>>                return -EINVAL;
>>>        }
>>> @@ -1379,6 +1405,9 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>>>                                l->formats = formats_rdi_8x96;
>>>                                l->nformats = ARRAY_SIZE(formats_rdi_8x96);
>>>                        }
>>> +             } else if (camss->version == CAMSS_845) {
>>> +                     l->formats = formats_rdi_845;
>>> +                     l->nformats = ARRAY_SIZE(formats_rdi_845);
>>>                } else {
>>>                        return -EINVAL;
>>>                }
>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
>>> index aad5dc74c2c0..29b3d930ffc6 100644
>>> --- a/drivers/media/platform/qcom/camss/camss-vfe.h
>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h
>>> @@ -19,7 +19,6 @@
>>>    #include "camss-video.h"
>>>    #include "camss-vfe-gen1.h"
>>>
>>> -
>>>    #define MSM_VFE_PAD_SINK 0
>>>    #define MSM_VFE_PAD_SRC 1
>>>    #define MSM_VFE_PADS_NUM 2
>>> @@ -38,14 +37,14 @@
>>>    #define to_vfe(ptr_line)    \
>>>        container_of(vfe_line_array(ptr_line), struct vfe_device, line)
>>>
>>> -
>>>    enum vfe_output_state {
>>>        VFE_OUTPUT_OFF,
>>>        VFE_OUTPUT_RESERVED,
>>>        VFE_OUTPUT_SINGLE,
>>>        VFE_OUTPUT_CONTINUOUS,
>>>        VFE_OUTPUT_IDLE,
>>> -     VFE_OUTPUT_STOPPING
>>> +     VFE_OUTPUT_STOPPING,
>>> +     VFE_OUTPUT_ON,
>>>    };
>>>
>>>    enum vfe_line_id {
>>> @@ -53,6 +52,7 @@ enum vfe_line_id {
>>>        VFE_LINE_RDI0 = 0,
>>>        VFE_LINE_RDI1 = 1,
>>>        VFE_LINE_RDI2 = 2,
>>> +     VFE_LINE_NUM_GEN2 = 3,
>>>        VFE_LINE_PIX = 3,
>>>        VFE_LINE_NUM_GEN1 = 4,
>>>        VFE_LINE_NUM_MAX = 4
>>> @@ -73,6 +73,9 @@ struct vfe_output {
>>>                        int active_buf;
>>>                        int wait_sof;
>>>                } gen1;
>>> +             struct {
>>> +                     int active_num;
>>> +             } gen2;
>>>        };
>>>        enum vfe_output_state state;
>>>        unsigned int sequence;
>>> @@ -171,14 +174,6 @@ void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer)
>>>
>>>    struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);
>>>
>>> -/*
>>> - * vfe_disable - Disable streaming on VFE line
>>> - * @line: VFE line
>>> - *
>>> - * Return 0 on success or a negative error code otherwise
>>> - */
>>> -int vfe_disable(struct vfe_line *line);
>>> -
>>>    int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);
>>>
>>>    /*
>>> @@ -193,8 +188,17 @@ int vfe_put_output(struct vfe_line *line);
>>>    int vfe_release_wm(struct vfe_device *vfe, u8 wm);
>>>    int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
>>>
>>> +/*
>>> + * vfe_reset - Trigger reset on VFE module and wait to complete
>>> + * @vfe: VFE device
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +int vfe_reset(struct vfe_device *vfe);
>>> +
>>>    extern const struct vfe_hw_ops vfe_ops_4_1;
>>>    extern const struct vfe_hw_ops vfe_ops_4_7;
>>>    extern const struct vfe_hw_ops vfe_ops_4_8;
>>> +extern const struct vfe_hw_ops vfe_ops_170;
>>>
>>>    #endif /* QC_MSM_CAMSS_VFE_H */
>>> diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
>>> index 97cea7c4d769..f282275af626 100644
>>> --- a/drivers/media/platform/qcom/camss/camss-video.c
>>> +++ b/drivers/media/platform/qcom/camss/camss-video.c
>>> @@ -133,6 +133,55 @@ static const struct camss_format_info formats_rdi_8x96[] = {
>>>          { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>    };
>>>
>>> +static const struct camss_format_info formats_rdi_845[] = {
>>> +     { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>> +     { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>> +     { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>> +     { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>> +     { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_PIX_FMT_SBGGR10, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>> +     { MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>> +     { MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>> +     { MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>> +     { MEDIA_BUS_FMT_SBGGR14_1X14, V4L2_PIX_FMT_SBGGR14P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>> +     { MEDIA_BUS_FMT_SGBRG14_1X14, V4L2_PIX_FMT_SGBRG14P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>> +     { MEDIA_BUS_FMT_SGRBG14_1X14, V4L2_PIX_FMT_SGRBG14P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>> +     { MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>> +     { MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +};
>>> +
>>>    static const struct camss_format_info formats_pix_8x16[] = {
>>>        { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
>>>          { { 1, 1 } }, { { 2, 3 } }, { 8 } },
>>> @@ -960,6 +1009,9 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
>>>                        video->formats = formats_rdi_8x96;
>>>                        video->nformats = ARRAY_SIZE(formats_rdi_8x96);
>>>                }
>>> +     }  else if (video->camss->version == CAMSS_845) {
>>> +             video->formats = formats_rdi_845;
>>> +             video->nformats = ARRAY_SIZE(formats_rdi_845);
>>>        } else {
>>>                ret = -EINVAL;
>>>                goto error_video_register;
>>> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
>>> index 6c6f1e59ccd8..0e006def1996 100644
>>> --- a/drivers/media/platform/qcom/camss/camss.c
>>> +++ b/drivers/media/platform/qcom/camss/camss.c
>>> @@ -465,6 +465,67 @@ static const struct resources vfe_res_660[] = {
>>>        }
>>>    };
>>>
>>> +static const struct resources vfe_res_845[] = {
>>> +     /* VFE0 */
>>> +     {
>>> +             .regulator = { NULL },
>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>> +                             "soc_ahb", "vfe0", "vfe0_axi",
>>> +                             "vfe0_src", "csi0",
>>> +                             "csi0_src"},
>>> +             .clock_rate = { { 0 },
>>> +                             { 0 },
>>> +                             { 80000000 },
>>> +                             { 0 },
>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>> +                             { 0 },
>>> +                             { 320000000 },
>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>> +                             { 384000000 } },
>>> +             .reg = { "vfe0" },
>>> +             .interrupt = { "vfe0" }
>>> +     },
>>> +
>>> +     /* VFE1 */
>>> +     {
>>> +             .regulator = { NULL },
>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>> +                             "soc_ahb", "vfe1", "vfe1_axi",
>>> +                             "vfe1_src", "csi1",
>>> +                             "csi1_src"},
>>> +             .clock_rate = { { 0 },
>>> +                             { 0 },
>>> +                             { 80000000 },
>>> +                             { 0 },
>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>> +                             { 0 },
>>> +                             { 320000000 },
>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>> +                             { 384000000 } },
>>> +             .reg = { "vfe1" },
>>> +             .interrupt = { "vfe1" }
>>> +     },
>>> +
>>> +     /* VFE-lite */
>>> +     {
>>> +             .regulator = { NULL },
>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>> +                             "soc_ahb", "vfe_lite",
>>> +                             "vfe_lite_src", "csi2",
>>> +                             "csi2_src"},
>>> +             .clock_rate = { { 0 },
>>> +                             { 0 },
>>> +                             { 80000000 },
>>> +                             { 0 },
>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>> +                             { 320000000 },
>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>> +                             { 384000000 } },
>>> +             .reg = { "vfe_lite" },
>>> +             .interrupt = { "vfe_lite" }
>>> +     }
>>> +};
>>> +
>>>    /*
>>>     * camss_add_clock_margin - Add margin to clock frequency rate
>>>     * @rate: Clock frequency rate
>>>