[RESEND PATCH 1/7] arm64: dts: Add hwspinlock node for Spreadtrum SC9860

[RESEND PATCH 1/7] arm64: dts: Add hwspinlock node for Spreadtrum SC9860

[Baolin Wang]

The Spreadtrum SC9860 platform only has one hardware spinlock device,
which is located on AON system of Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/whale2.dtsi |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 328009c..b9cc0fb 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -6,6 +6,8 @@
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
+
 / {
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
@@ -104,6 +106,21 @@
 				status = "disabled";
 			};
 		};
+
+		aon {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			hwlock: hwspinlock@40500000 {
+				compatible = "sprd,hwspinlock-r3p0";
+				reg = <0 0x40500000 0 0x1000>;
+				#hwlock-cells = <1>;
+				clock-names = "enable";
+				clocks = <&aon_gate CLK_SPLK_EB>;
+			};
+		};
 	};
 
 	ext_32k: ext_32k {
-- 
1.7.9.5

[RESEND PATCH 2/7] arm64: dts: Add ADI device node for Spreadtrum SC9860

[Baolin Wang]

We will access the PMIC through ADI controller, thus this patch adds
the ADI device node for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts |    1 +
 arch/arm64/boot/dts/sprd/whale2.dtsi      |    9 +++++++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
index 0362ecd..550f323 100644
--- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -22,6 +22,7 @@
 		serial1 = &uart1; /* UART console */
 		serial2 = &uart2; /* Reserved */
 		serial3 = &uart3; /* for GPS */
+		spi0 = &adi_bus;
 	};
 
 	memory{
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index b9cc0fb..63fe89e 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -113,6 +113,15 @@
 			#size-cells = <2>;
 			ranges;
 
+			adi_bus: spi@40030000 {
+				compatible = "sprd,sc9860-adi";
+				reg = <0 0x40030000 0 0x10000>;
+				hwlocks = <&hwlock 0>;
+				hwlock-names = "adi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
 			hwlock: hwspinlock@40500000 {
 				compatible = "sprd,hwspinlock-r3p0";
 				reg = <0 0x40500000 0 0x1000>;
-- 
1.7.9.5

[RESEND PATCH 3/7] arm64: dts: Add pin controller node for Spreadtrum SC9860

[Baolin Wang]

This patch adds the pin controller device node for Spreadtrum
SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/whale2.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 63fe89e..23cedbd 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -129,6 +129,11 @@
 				clock-names = "enable";
 				clocks = <&aon_gate CLK_SPLK_EB>;
 			};
+
+			pin_controller: pinctrl@402a0000 {
+				compatible = "sprd,sc9860-pinctrl";
+				reg = <0 0x402a0000 0 0x10000>;
+			};
 		};
 	};
 
-- 
1.7.9.5

[RESEND PATCH 4/7] arm64: dts: Add timer node for Spreadtrum SC9860

[Baolin Wang]

We will use one always-on timer to be the broadcast device, thus add
the timer device node for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/whale2.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 23cedbd..3dc6389 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -122,6 +122,13 @@
 				#size-cells = <0>;
 			};
 
+			timer@40050000 {
+				compatible = "sprd,sc9860-timer";
+				reg = <0 0x40050000 0 0x20>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_32k>;
+			};
+
 			hwlock: hwspinlock@40500000 {
 				compatible = "sprd,hwspinlock-r3p0";
 				reg = <0 0x40500000 0 0x1000>;
-- 
1.7.9.5

[RESEND PATCH 5/7] arm64: dts: Add watchdog device node for Spreadtrum SC9860

[Baolin Wang]

Add the watchdog device node for Spreadtrum SC9860 platform to
watch the system's stability.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/whale2.dtsi |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 3dc6389..f2cdf4d 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -141,6 +141,15 @@
 				compatible = "sprd,sc9860-pinctrl";
 				reg = <0 0x402a0000 0 0x10000>;
 			};
+
+			watchdog@40310000 {
+				compatible = "sprd,sp9860-wdt";
+				reg = <0 0x40310000 0 0x1000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-sec = <12>;
+				clock-names = "enable";
+				clocks = <&aon_gate CLK_APCPU_WDG_EB>;
+			};
 		};
 	};
 
-- 
1.7.9.5

[RESEND PATCH 6/7] arm64: dts: Add DMA device node for Spreadtrum SC9860

[Baolin Wang]

The Spreadtrum SC9860 platform has two DMA controllers, one is located
on the ap-ahb system, and another one is located on the agcp system.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/whale2.dtsi |   34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index f2cdf4d..66a881e 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -107,6 +107,23 @@
 			};
 		};
 
+		ap-ahb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			ap_dma: dma-controller@20100000 {
+				compatible = "sprd,sc9860-dma";
+				reg = <0 0x20100000 0 0x4000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				#dma-channels = <32>;
+				clock-names = "enable";
+				clocks = <&apahb_gate CLK_DMA_EB>;
+			};
+		};
+
 		aon {
 			compatible = "simple-bus";
 			#address-cells = <2>;
@@ -151,6 +168,23 @@
 				clocks = <&aon_gate CLK_APCPU_WDG_EB>;
 			};
 		};
+
+		agcp {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			agcp_dma: dma-controller@41580000 {
+				compatible = "sprd,sc9860-dma";
+				reg = <0 0x41580000 0 0x4000>;
+				#dma-cells = <1>;
+				#dma-channels = <32>;
+				clock-names = "enable", "ashb_eb";
+				clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
+				       <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+			};
+		};
 	};
 
 	ext_32k: ext_32k {
-- 
1.7.9.5

[RESEND PATCH 7/7] arm64: dts: Add SC2731 PMIC dts file for Spreadtrum SC9860

[Baolin Wang]

The Spreadtrum SC9860 platform has one SC2731 PMIC, and the SC2731
PMIC integrates all mobile handset power management, audio codec,
battery management and user interface support function in a single
chip.

This patch adds the SC2731 dts file, as well as adding the RTC and
regulator device node for this PMIC.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/sc2731.dtsi      |  169 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts |    1 +
 2 files changed, 170 insertions(+)
 create mode 100644 arch/arm64/boot/dts/sprd/sc2731.dtsi

diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
new file mode 100644
index 0000000..4331006
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -0,0 +1,169 @@
+/*
+ * Spreadtrum SC2731 PMIC dts file
+ *
+ * Copyright (C) 2018, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&adi_bus {
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@280 {
+			compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
+			reg = <0x280>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		regulators {
+			compatible = "sprd,sc27xx-regulator";
+
+			vddarm0: BUCK_CPU0 {
+				regulator-name = "vddarm0";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1996875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddarm1: BUCK_CPU1 {
+				regulator-name = "vddarm1";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1996875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			dcdcrf: BUCK_RF {
+				regulator-name = "dcdcrf";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2196875>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-always-on;
+			};
+
+			vddcama0: LDO_CAMA0 {
+				regulator-name = "vddcama0";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+			};
+
+			vddcama1: LDO_CAMA1 {
+				regulator-name = "vddcama1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcammot: LDO_CAMMOT {
+				regulator-name = "vddcammot";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddvldo: LDO_VLDO {
+				regulator-name = "vddvldo";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddemmccore: LDO_EMMCCORE {
+				regulator-name = "vddemmccore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+				regulator-boot-on;
+			};
+
+			vddsdcore: LDO_SDCORE {
+				regulator-name = "vddsdcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsdio: LDO_SDIO {
+				regulator-name = "vddsdio";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddwifipa: LDO_WIFIPA {
+				regulator-name = "vddwifipa";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddusb33: LDO_USB33 {
+				regulator-name = "vddusb33";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd0: LDO_CAMD0 {
+				regulator-name = "vddcamd0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd1: LDO_CAMD1 {
+				regulator-name = "vddcamd1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcon: LDO_CON {
+				regulator-name = "vddcon";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamio: LDO_CAMIO {
+				regulator-name = "vddcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsram: LDO_SRAM {
+				regulator-name = "vddsram";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
index 550f323..3bd18e3 100644
--- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 
 #include "sc9860.dtsi"
+#include "sc2731.dtsi"
 
 / {
 	model = "Spreadtrum SP9860G 3GFHD Board";
-- 
1.7.9.5

Re: [RESEND PATCH 1/7] arm64: dts: Add hwspinlock node for Spreadtrum SC9860

[Arnd Bergmann]

On Wed, Feb 28, 2018 at 11:47 AM, Baolin Wang <baolin.wang@linaro.org> wrote:
> The Spreadtrum SC9860 platform only has one hardware spinlock device,
> which is located on AON system of Spreadtrum SC9860 platform.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

Applied all seven patches to next/dt, thanks!

     Arnd