* [PATCH] MIPS: Loongson64: Add Loongson-2K1000 reset support
@ 2021-04-14 1:26 Qing Zhang
2021-04-14 12:17 ` Jiaxun Yang
0 siblings, 1 reply; 3+ messages in thread
From: Qing Zhang @ 2021-04-14 1:26 UTC (permalink / raw)
To: Thomas Bogendoerfer, Jiaxun Yang, Huacai Chen; +Cc: linux-mips, linux-kernel
Add power management register operations to support reboot and poweroff.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
---
.../include/asm/mach-loongson64/loongson.h | 8 ++++++
arch/mips/loongson64/reset.c | 28 ++++++++++++++++---
2 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
index f7c3ab6d724e..9d254a7b438a 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson.h
@@ -263,4 +263,12 @@ extern u64 loongson_freqctrl[MAX_PACKAGES];
#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \
((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+/* Loongson-2K1000 Power management related registers */
+#define PM1_STS 0x0C /* Power Management1 Status Register */
+#define PM1_CNT 0x14 /* Power Management 1 Control Register */
+#define RST_CNT 0x30 /* Reset Control Register */
+#define SLP_TYP GENMASK(12, 10) /* Sleep Enable */
+#define SLP_EN BIT(13) /* Soft Off */
+#define ACPI_OFF 0x7000
+
#endif /* __ASM_MACH_LOONGSON64_LOONGSON_H */
diff --git a/arch/mips/loongson64/reset.c b/arch/mips/loongson64/reset.c
index 3bb8a1ed9348..b4348bf50538 100644
--- a/arch/mips/loongson64/reset.c
+++ b/arch/mips/loongson64/reset.c
@@ -18,9 +18,16 @@
static void loongson_restart(char *command)
{
- void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
+ if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) {
+ unsigned long base;
- fw_restart();
+ base = CKSEG1ADDR(LOONGSON_REG_BASE) + ACPI_OFF;
+ writel(1, (void *)(base + RST_CNT));
+ } else {
+ void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
+
+ fw_restart();
+ }
while (1) {
if (cpu_wait)
cpu_wait();
@@ -29,9 +36,22 @@ static void loongson_restart(char *command)
static void loongson_poweroff(void)
{
- void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
- fw_poweroff();
+ if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) {
+ unsigned long base;
+ unsigned int acpi_ctrl;
+
+ base = CKSEG1ADDR(LOONGSON_REG_BASE) + ACPI_OFF;
+ acpi_ctrl = readl((void *)(base + PM1_STS));
+ acpi_ctrl &= 0xffffffff;
+ writel(acpi_ctrl, (void *)(base + PM1_STS));
+ acpi_ctrl = SLP_EN | SLP_TYP;
+ writel(acpi_ctrl, (void *)(base + PM1_CNT));
+ } else {
+ void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
+
+ fw_poweroff();
+ }
while (1) {
if (cpu_wait)
cpu_wait();
--
2.31.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] MIPS: Loongson64: Add Loongson-2K1000 reset support
2021-04-14 1:26 [PATCH] MIPS: Loongson64: Add Loongson-2K1000 reset support Qing Zhang
@ 2021-04-14 12:17 ` Jiaxun Yang
2021-04-15 1:14 ` zhangqing
0 siblings, 1 reply; 3+ messages in thread
From: Jiaxun Yang @ 2021-04-14 12:17 UTC (permalink / raw)
To: Qing Zhang, Thomas Bogendoerfer, Huacai Chen; +Cc: linux-mips, linux-kernel
On Wed, Apr 14, 2021, at 9:26 AM, Qing Zhang wrote:
> Add power management register operations to support reboot and poweroff.
>
> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
No that's not what we intended to do.
Please add a devicetree node for pm block.
Thanks
> ---
> .../include/asm/mach-loongson64/loongson.h | 8 ++++++
> arch/mips/loongson64/reset.c | 28 ++++++++++++++++---
> 2 files changed, 32 insertions(+), 4 deletions(-)
>
> diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h
> b/arch/mips/include/asm/mach-loongson64/loongson.h
> index f7c3ab6d724e..9d254a7b438a 100644
> --- a/arch/mips/include/asm/mach-loongson64/loongson.h
> +++ b/arch/mips/include/asm/mach-loongson64/loongson.h
> @@ -263,4 +263,12 @@ extern u64 loongson_freqctrl[MAX_PACKAGES];
> #define LOONGSON_PCIMAP_WIN(WIN, ADDR) \
> ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
>
> +/* Loongson-2K1000 Power management related registers */
> +#define PM1_STS 0x0C /* Power Management1 Status Register */
> +#define PM1_CNT 0x14 /* Power Management 1 Control Register */
> +#define RST_CNT 0x30 /* Reset Control Register */
> +#define SLP_TYP GENMASK(12, 10) /* Sleep Enable */
> +#define SLP_EN BIT(13) /* Soft Off */
> +#define ACPI_OFF 0x7000
> +
> #endif /* __ASM_MACH_LOONGSON64_LOONGSON_H */
> diff --git a/arch/mips/loongson64/reset.c b/arch/mips/loongson64/reset.c
> index 3bb8a1ed9348..b4348bf50538 100644
> --- a/arch/mips/loongson64/reset.c
> +++ b/arch/mips/loongson64/reset.c
> @@ -18,9 +18,16 @@
> static void loongson_restart(char *command)
> {
>
> - void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
> + if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) {
> + unsigned long base;
>
> - fw_restart();
> + base = CKSEG1ADDR(LOONGSON_REG_BASE) + ACPI_OFF;
> + writel(1, (void *)(base + RST_CNT));
> + } else {
> + void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
> +
> + fw_restart();
> + }
> while (1) {
> if (cpu_wait)
> cpu_wait();
> @@ -29,9 +36,22 @@ static void loongson_restart(char *command)
>
> static void loongson_poweroff(void)
> {
> - void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
>
> - fw_poweroff();
> + if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) {
> + unsigned long base;
> + unsigned int acpi_ctrl;
> +
> + base = CKSEG1ADDR(LOONGSON_REG_BASE) + ACPI_OFF;
> + acpi_ctrl = readl((void *)(base + PM1_STS));
> + acpi_ctrl &= 0xffffffff;
> + writel(acpi_ctrl, (void *)(base + PM1_STS));
> + acpi_ctrl = SLP_EN | SLP_TYP;
> + writel(acpi_ctrl, (void *)(base + PM1_CNT));
> + } else {
> + void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
> +
> + fw_poweroff();
> + }
> while (1) {
> if (cpu_wait)
> cpu_wait();
> --
> 2.31.0
>
>
--
- Jiaxun
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] MIPS: Loongson64: Add Loongson-2K1000 reset support
2021-04-14 12:17 ` Jiaxun Yang
@ 2021-04-15 1:14 ` zhangqing
0 siblings, 0 replies; 3+ messages in thread
From: zhangqing @ 2021-04-15 1:14 UTC (permalink / raw)
To: Jiaxun Yang, Thomas Bogendoerfer, Huacai Chen; +Cc: linux-mips, linux-kernel
On 04/14/2021 08:17 PM, Jiaxun Yang wrote:
>
> On Wed, Apr 14, 2021, at 9:26 AM, Qing Zhang wrote:
>> Add power management register operations to support reboot and poweroff.
>>
>> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> No that's not what we intended to do.
> Please add a devicetree node for pm block.
Hi, jiaxun
Thanks for your reply, I will do it and send v2 .
-Qing
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-04-15 1:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-14 1:26 [PATCH] MIPS: Loongson64: Add Loongson-2K1000 reset support Qing Zhang
2021-04-14 12:17 ` Jiaxun Yang
2021-04-15 1:14 ` zhangqing
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).