* [PATCH V2] IIO channel type and modifiers for CCT and RGBC data
@ 2012-05-16 15:46 Jon Brenner
2012-05-16 16:06 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Jon Brenner @ 2012-05-16 15:46 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio, Linux Kernel
Add iio channel type and modifiers for Correlated Color Temperature (CCT)
and RGBC (red/green/blue/clear) data.
Add CCT and RGBC descriptions to documentation.
Changes:
Revised/condensed RGBC descriptions.
Signed-off-by: Jon Brenner <jbrenner@taosinc.com>
---
drivers/iio/industrialio-core.c | 5 ++++
.../staging/iio/Documentation/sysfs-bus-iio-light | 23 ++++++++++++++++++++
include/linux/iio/types.h | 5 ++++
3 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 1ddd886..34d8cc9 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -64,6 +64,7 @@ static const char * const iio_chan_type_name_spec[] = {
[IIO_TIMESTAMP] = "timestamp",
[IIO_CAPACITANCE] = "capacitance",
[IIO_ALTVOLTAGE] = "altvoltage",
+ [IIO_CCT] = "cct",
};
static const char * const iio_modifier_names[] = {
@@ -72,6 +73,10 @@ static const char * const iio_modifier_names[] = {
[IIO_MOD_Z] = "z",
[IIO_MOD_LIGHT_BOTH] = "both",
[IIO_MOD_LIGHT_IR] = "ir",
+ [IIO_MOD_LIGHT_CLEAR] = "clear",
+ [IIO_MOD_LIGHT_RED] = "red",
+ [IIO_MOD_LIGHT_GREEN] = "green",
+ [IIO_MOD_LIGHT_BLUE] = "blue",
};
/* relies on pairs of these shared then separate */
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
index 715c74d..83a2876 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
@@ -34,6 +34,15 @@ Description:
it comes back in SI units, it should also include _input else it
should include _raw to signify it is not in SI units.
+What: /sys/bus/iio/devices/device[n]/in_cct0[_input|_raw]
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ This should return the correlated color temperature from the
+ light sensor. If it comes back in SI units, it should also
+ include _input else it should include _raw to signify it is not
+ in SI units.
+
What: /sys/.../device[n]/proximity_on_chip_ambient_infrared_supression
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
@@ -82,3 +91,17 @@ Contact: linux-iio@vger.kernel.org
Description:
This property gets/sets the table of coefficients
used in calculating illuminance in lux.
+
+What: /sys/bus/iio/devices/device[n]/in_intensity_clear[_input|_raw]
+What: /sys/bus/iio/devices/device[n]/in_intensity_red[_input|_raw]
+What: /sys/bus/iio/devices/device[n]/in_intensity_green[_input|_raw]
+What: /sys/bus/iio/devices/device[n]/in_intensity_blue[_input|_raw]
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ This property is supported by sensors that have a RGBC
+ sensing mode. This value should be the output from a reading
+ and if expressed in SI units, should include _input. If this
+ value is not in SI units (irradiance, uW/mm), then it should
+ include _raw.
+
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 1b073b1..a7de5d9 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -28,6 +28,7 @@ enum iio_chan_type {
IIO_TIMESTAMP,
IIO_CAPACITANCE,
IIO_ALTVOLTAGE,
+ IIO_CCT,
};
enum iio_modifier {
@@ -45,6 +46,10 @@ enum iio_modifier {
IIO_MOD_X_OR_Y_OR_Z,
IIO_MOD_LIGHT_BOTH,
IIO_MOD_LIGHT_IR,
+ IIO_MOD_LIGHT_CLEAR,
+ IIO_MOD_LIGHT_RED,
+ IIO_MOD_LIGHT_GREEN,
+ IIO_MOD_LIGHT_BLUE,
};
#define IIO_VAL_INT 1
--
1.7.4.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH V2] IIO channel type and modifiers for CCT and RGBC data
2012-05-16 15:46 [PATCH V2] IIO channel type and modifiers for CCT and RGBC data Jon Brenner
@ 2012-05-16 16:06 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2012-05-16 16:06 UTC (permalink / raw)
To: Jon Brenner; +Cc: linux-iio, Linux Kernel
Jon Brenner <jbrenner@taosinc.com> wrote:
>Add iio channel type and modifiers for Correlated Color Temperature
>(CCT)
>and RGBC (red/green/blue/clear) data.
>Add CCT and RGBC descriptions to documentation.
>
>Changes:
>Revised/condensed RGBC descriptions.
>
>Signed-off-by: Jon Brenner <jbrenner@taosinc.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
>---
> drivers/iio/industrialio-core.c | 5 ++++
>.../staging/iio/Documentation/sysfs-bus-iio-light | 23
>++++++++++++++++++++
> include/linux/iio/types.h | 5 ++++
> 3 files changed, 33 insertions(+), 0 deletions(-)
>
>diff --git a/drivers/iio/industrialio-core.c
>b/drivers/iio/industrialio-core.c
>index 1ddd886..34d8cc9 100644
>--- a/drivers/iio/industrialio-core.c
>+++ b/drivers/iio/industrialio-core.c
>@@ -64,6 +64,7 @@ static const char * const iio_chan_type_name_spec[] =
>{
> [IIO_TIMESTAMP] = "timestamp",
> [IIO_CAPACITANCE] = "capacitance",
> [IIO_ALTVOLTAGE] = "altvoltage",
>+ [IIO_CCT] = "cct",
> };
>
> static const char * const iio_modifier_names[] = {
>@@ -72,6 +73,10 @@ static const char * const iio_modifier_names[] = {
> [IIO_MOD_Z] = "z",
> [IIO_MOD_LIGHT_BOTH] = "both",
> [IIO_MOD_LIGHT_IR] = "ir",
>+ [IIO_MOD_LIGHT_CLEAR] = "clear",
>+ [IIO_MOD_LIGHT_RED] = "red",
>+ [IIO_MOD_LIGHT_GREEN] = "green",
>+ [IIO_MOD_LIGHT_BLUE] = "blue",
> };
>
> /* relies on pairs of these shared then separate */
>diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
>b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
>index 715c74d..83a2876 100644
>--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
>+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
>@@ -34,6 +34,15 @@ Description:
> it comes back in SI units, it should also include _input else it
> should include _raw to signify it is not in SI units.
>
>+What: /sys/bus/iio/devices/device[n]/in_cct0[_input|_raw]
>+KernelVersion: 3.4.0
>+Contact: linux-iio@vger.kernel.org
>+Description:
>+ This should return the correlated color temperature from the
>+ light sensor. If it comes back in SI units, it should also
>+ include _input else it should include _raw to signify it is not
>+ in SI units.
>+
>What: /sys/.../device[n]/proximity_on_chip_ambient_infrared_supression
> KernelVersion: 2.6.37
> Contact: linux-iio@vger.kernel.org
>@@ -82,3 +91,17 @@ Contact: linux-iio@vger.kernel.org
> Description:
> This property gets/sets the table of coefficients
> used in calculating illuminance in lux.
>+
>+What: /sys/bus/iio/devices/device[n]/in_intensity_clear[_input|_raw]
>+What: /sys/bus/iio/devices/device[n]/in_intensity_red[_input|_raw]
>+What: /sys/bus/iio/devices/device[n]/in_intensity_green[_input|_raw]
>+What: /sys/bus/iio/devices/device[n]/in_intensity_blue[_input|_raw]
>+KernelVersion: 3.4.0
>+Contact: linux-iio@vger.kernel.org
>+Description:
>+ This property is supported by sensors that have a RGBC
>+ sensing mode. This value should be the output from a reading
>+ and if expressed in SI units, should include _input. If this
>+ value is not in SI units (irradiance, uW/mm), then it should
>+ include _raw.
>+
>diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
>index 1b073b1..a7de5d9 100644
>--- a/include/linux/iio/types.h
>+++ b/include/linux/iio/types.h
>@@ -28,6 +28,7 @@ enum iio_chan_type {
> IIO_TIMESTAMP,
> IIO_CAPACITANCE,
> IIO_ALTVOLTAGE,
>+ IIO_CCT,
> };
>
> enum iio_modifier {
>@@ -45,6 +46,10 @@ enum iio_modifier {
> IIO_MOD_X_OR_Y_OR_Z,
> IIO_MOD_LIGHT_BOTH,
> IIO_MOD_LIGHT_IR,
>+ IIO_MOD_LIGHT_CLEAR,
>+ IIO_MOD_LIGHT_RED,
>+ IIO_MOD_LIGHT_GREEN,
>+ IIO_MOD_LIGHT_BLUE,
> };
>
> #define IIO_VAL_INT 1
>--
>1.7.4.1
>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-05-16 16:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-16 15:46 [PATCH V2] IIO channel type and modifiers for CCT and RGBC data Jon Brenner
2012-05-16 16:06 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).