[PATCH] arm64: dts: imx8mq-librem5-devkit: Add proximity sensor

[PATCH] arm64: dts: imx8mq-librem5-devkit: Add proximity sensor

[Guido Günther]

Support for the vcnl4040 landet a while ago so add it and the
corresponding pinmux. The irq is currently unused in the driver so don't
configure it yet.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../boot/dts/freescale/imx8mq-librem5-devkit.dts     | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index c8627f6614ae..b87c2e39b16c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -448,6 +448,12 @@
 		VDDIO-supply = <&reg_1v8_p>;
 	};
 
+	prox@60 {
+		compatible = "vishay,vcnl4040";
+		reg = <0x60>;
+		pinctrl-0 = <&pinctrl_prox>;
+	};
+
 	accel-gyro@6a {
 		compatible = "st,lsm9ds1-imu";
 		reg = <0x6a>;
@@ -550,6 +556,12 @@
 		>;
 	};
 
+	pinctrl_prox: proxgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x80  /* prox intr */
+		>;
+	};
+
 	pinctrl_pwr_en: pwrengrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x06
-- 
2.23.0

Re: [PATCH] arm64: dts: imx8mq-librem5-devkit: Add proximity sensor

[Shawn Guo]

On Mon, Jan 20, 2020 at 05:12:55PM +0100, Guido Günther wrote:
> Support for the vcnl4040 landet a while ago so add it and the
> corresponding pinmux. The irq is currently unused in the driver so don't
> configure it yet.
> 
> Signed-off-by: Guido Günther <agx@sigxcpu.org>
> ---
>  .../boot/dts/freescale/imx8mq-librem5-devkit.dts     | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index c8627f6614ae..b87c2e39b16c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -448,6 +448,12 @@
>  		VDDIO-supply = <&reg_1v8_p>;
>  	};
>  
> +	prox@60 {

I changed node name to proximity-sensor and applied the patch.

Shawn

> +		compatible = "vishay,vcnl4040";
> +		reg = <0x60>;
> +		pinctrl-0 = <&pinctrl_prox>;
> +	};
> +
>  	accel-gyro@6a {
>  		compatible = "st,lsm9ds1-imu";
>  		reg = <0x6a>;
> @@ -550,6 +556,12 @@
>  		>;
>  	};
>  
> +	pinctrl_prox: proxgrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x80  /* prox intr */
> +		>;
> +	};
> +
>  	pinctrl_pwr_en: pwrengrp {
>  		fsl,pins = <
>  			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x06
> -- 
> 2.23.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel