From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: MSM <linux-arm-msm@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Evan Green <evgreen@chromium.org>,
Douglas Anderson <dianders@chromium.org>
Subject: [PATCH v3 0/5] UFS on APQ8098/MSM8998
Date: Mon, 4 Feb 2019 18:34:31 +0100 [thread overview]
Message-ID: <e3c82a49-c601-effc-348f-f768656c659f@free.fr> (raw)
Hello,
This series is now good enough for the limelight, IMO.
Difference between, v2 and v3:
- Add qcom,msm8998-qmp-ufs-phy compat string and match it in the PHY driver
- Drop vdd-hba-fixed-regulator
- Write the reg addresses with full 32-bit width
- Set regulator-allow-set-load only on the 3 rails used by UFS.
- Revert the patch introducing ufshcd_set_vccq_rail_unused
Difference between v1 and v2:
- New patch to add 'regulator-allow-set-load' prop to all vreg nodes
- Rename rpmcc node to 'clock-controller' + Add Review tags
- Drop UFS pinctrl gymnastics (not required, probably left enabled in bootloader)
- Delete GCC_UFS_ICE_CORE_CLK (ICE not used upstream, I think)
- Fix sizes of ufsphy register areas based on Jeffrey's feedback
- Hack ufshcd_set_vccq_rail_unused into a NOP to work around lock up + reboot
Marc Gonzalez (5):
arm64: dts: qcom: msm8998: Add UFS nodes
arm64: dts: qcom: msm8998: Allow drivers to set-load
dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy
phy: qcom-qmp: Add QMP UFS PHY support for msm8998
Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
.../devicetree/bindings/phy/qcom-qmp-phy.txt | 1 +
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 22 +++++++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 63 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.c | 3 +
drivers/scsi/ufs/ufs.h | 1 -
drivers/scsi/ufs/ufshcd.c | 59 ++---------------
6 files changed, 93 insertions(+), 56 deletions(-)
--
2.17.1
next reply other threads:[~2019-02-04 17:43 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 17:34 Marc Gonzalez [this message]
2019-02-04 17:36 ` [PATCH v3 1/5] arm64: dts: qcom: msm8998: Add UFS nodes Marc Gonzalez
2019-02-04 18:06 ` Jeffrey Hugo
2019-02-06 10:58 ` Marc Gonzalez
2019-02-04 17:37 ` [PATCH v3 2/5] arm64: dts: qcom: msm8998: Allow drivers to set-load Marc Gonzalez
2019-02-04 18:06 ` Jeffrey Hugo
2019-02-04 17:38 ` [PATCH v3 3/5] dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy Marc Gonzalez
2019-02-04 18:08 ` Jeffrey Hugo
2019-02-04 17:39 ` [PATCH v3 4/5] phy: qcom-qmp: Add QMP UFS PHY support for msm8998 Marc Gonzalez
2019-02-04 18:10 ` Jeffrey Hugo
2019-02-06 12:39 ` Kishon Vijay Abraham I
2019-02-06 12:44 ` Marc Gonzalez
2019-02-04 17:42 ` [PATCH v3 5/5] Revert "scsi: ufs: disable vccq if it's not needed by UFS device" Marc Gonzalez
2019-02-04 18:11 ` Jeffrey Hugo
2019-02-04 19:51 ` Avri Altman
2019-02-04 20:23 ` Jeffrey Hugo
2019-02-04 20:27 ` Bjorn Andersson
2019-02-05 4:58 ` Alim Akhtar
2019-02-05 6:27 ` Bjorn Andersson
2019-02-05 10:52 ` Alim Akhtar
2019-02-05 19:46 ` Bjorn Andersson
2019-02-06 15:23 ` Alim Akhtar
2019-02-05 17:24 ` Marc Gonzalez
2019-02-05 17:51 ` Marc Gonzalez
2019-02-05 18:19 ` Evan Green
2019-02-05 19:37 ` Jeffrey Hugo
2019-02-06 14:53 ` Marc Gonzalez
2019-02-06 14:59 ` Marc Gonzalez
2019-02-06 15:27 ` Alim Akhtar
2019-02-06 15:52 ` Marc Gonzalez
2019-02-07 8:50 ` Alim Akhtar
2019-02-07 14:52 ` Jeffrey Hugo
2019-02-08 9:09 ` Alim Akhtar
2019-02-08 10:03 ` Marc Gonzalez
2019-02-08 14:59 ` Jeffrey Hugo
2019-02-09 8:42 ` Alim Akhtar
2019-02-09 11:49 ` Marc Gonzalez
2019-02-10 15:58 ` Jeffrey Hugo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e3c82a49-c601-effc-348f-f768656c659f@free.fr \
--to=marc.w.gonzalez@free.fr \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).