From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: Stefano Stabellini <sstabellini@kernel.org>, xen-devel@lists.xen.org
Cc: linux-kernel@vger.kernel.org, jgross@suse.com,
Stefano Stabellini <stefano@aporeto.com>
Subject: Re: [PATCH v2 07/13] xen/pvcalls: implement accept command
Date: Wed, 26 Jul 2017 13:52:26 -0400 [thread overview]
Message-ID: <e74cb011-176e-f1ae-b1e6-be56fbb05d6b@oracle.com> (raw)
In-Reply-To: <1501017730-12797-7-git-send-email-sstabellini@kernel.org>
On 07/25/2017 05:22 PM, Stefano Stabellini wrote:
> Send PVCALLS_ACCEPT to the backend. Allocate a new active socket. Make
> sure that only one accept command is executed at any given time by
> setting PVCALLS_FLAG_ACCEPT_INFLIGHT and waiting on the
> inflight_accept_req waitqueue.
>
> sock->sk->sk_send_head is not used for ip sockets: reuse the field to
> store a pointer to the struct sock_mapping corresponding to the socket.
>
> Convert the new struct socket pointer into an uint64_t and use it as id
> for the new socket to pass to the backend.
>
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
> drivers/xen/pvcalls-front.c | 79 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/xen/pvcalls-front.h | 3 ++
> 2 files changed, 82 insertions(+)
>
> diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> index 3b5d50e..b8c4538 100644
> --- a/drivers/xen/pvcalls-front.c
> +++ b/drivers/xen/pvcalls-front.c
> @@ -413,6 +413,85 @@ int pvcalls_front_listen(struct socket *sock, int backlog)
> return ret;
> }
>
> +int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
> +{
> + struct pvcalls_bedata *bedata;
> + struct sock_mapping *map;
> + struct sock_mapping *map2 = NULL;
> + struct xen_pvcalls_request *req;
> + int notify, req_id, ret, evtchn;
> +
> + if (!pvcalls_front_dev)
> + return -ENOTCONN;
> + bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> + map = (struct sock_mapping *) READ_ONCE(sock->sk->sk_send_head);
> + if (!map)
> + return -ENOTSOCK;
> +
> + if (map->passive.status != PVCALLS_STATUS_LISTEN)
> + return -EINVAL;
> +
> + /*
> + * Backend only supports 1 inflight accept request, will return
> + * errors for the others
> + */
> + if (test_and_set_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> + (void *)&map->passive.flags)) {
> + if (wait_event_interruptible(map->passive.inflight_accept_req,
> + !test_and_set_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
> + (void *)&map->passive.flags))
> + != 0)
Unnecessary "!=0".
-boris
> + return -EINTR;
> + }
> +
> +
> + newsock->sk = kzalloc(sizeof(*newsock->sk), GFP_KERNEL);
> + if (newsock->sk == NULL)
> + return -ENOMEM;
> +
> + spin_lock(&bedata->pvcallss_lock);
> + req_id = bedata->ring.req_prod_pvt & (RING_SIZE(&bedata->ring) - 1);
> + if (RING_FULL(&bedata->ring) ||
> + READ_ONCE(bedata->rsp[req_id].req_id) != PVCALLS_INVALID_ID) {
> + kfree(newsock->sk);
> + spin_unlock(&bedata->pvcallss_lock);
> + return -EAGAIN;
> + }
> +
> + map2 = create_active(&evtchn);
> +
> + req = RING_GET_REQUEST(&bedata->ring, req_id);
> + req->req_id = req_id;
> + req->cmd = PVCALLS_ACCEPT;
> + req->u.accept.id = (uint64_t) sock;
> + req->u.accept.ref = map2->active.ref;
> + req->u.accept.id_new = (uint64_t) newsock;
> + req->u.accept.evtchn = evtchn;
> +
> + list_add_tail(&map2->list, &bedata->socket_mappings);
> + WRITE_ONCE(newsock->sk->sk_send_head, (void *)map2);
> + map2->sock = newsock;
> +
> + bedata->ring.req_prod_pvt++;
> + RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> + spin_unlock(&bedata->pvcallss_lock);
> + if (notify)
> + notify_remote_via_irq(bedata->irq);
> +
> + wait_event(bedata->inflight_req,
> + READ_ONCE(bedata->rsp[req_id].req_id) == req_id);
> +
> + clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT, (void *)&map->passive.flags);
> + wake_up(&map->passive.inflight_accept_req);
> +
> + ret = bedata->rsp[req_id].ret;
> + /* read ret, then set this rsp slot to be reused */
> + smp_mb();
> + WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
> + return ret;
> +}
> +
> static const struct xenbus_device_id pvcalls_front_ids[] = {
> { "pvcalls" },
> { "" }
> diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
> index aa8fe10..ab4f1da 100644
> --- a/drivers/xen/pvcalls-front.h
> +++ b/drivers/xen/pvcalls-front.h
> @@ -10,5 +10,8 @@ int pvcalls_front_bind(struct socket *sock,
> struct sockaddr *addr,
> int addr_len);
> int pvcalls_front_listen(struct socket *sock, int backlog);
> +int pvcalls_front_accept(struct socket *sock,
> + struct socket *newsock,
> + int flags);
>
> #endif
next prev parent reply other threads:[~2017-07-26 17:51 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-25 21:21 [PATCH v2 00/13] introduce the Xen PV Calls frontend Stefano Stabellini
2017-07-25 21:21 ` [PATCH v2 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Stefano Stabellini
2017-07-25 21:21 ` [PATCH v2 02/13] xen/pvcalls: connect to the backend Stefano Stabellini
2017-07-26 13:35 ` Boris Ostrovsky
2017-07-27 0:26 ` Stefano Stabellini
2017-07-27 15:07 ` Boris Ostrovsky
2017-07-31 21:55 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 03/13] xen/pvcalls: implement socket command and handle events Stefano Stabellini
2017-07-26 14:27 ` Boris Ostrovsky
2017-07-26 23:19 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 04/13] xen/pvcalls: implement connect command Stefano Stabellini
2017-07-26 14:51 ` Boris Ostrovsky
2017-07-26 23:22 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 05/13] xen/pvcalls: implement bind command Stefano Stabellini
2017-07-26 14:56 ` Boris Ostrovsky
2017-07-26 23:59 ` Stefano Stabellini
2017-07-27 14:43 ` Boris Ostrovsky
2017-07-31 22:17 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 06/13] xen/pvcalls: implement listen command Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 07/13] xen/pvcalls: implement accept command Stefano Stabellini
2017-07-26 17:52 ` Boris Ostrovsky [this message]
2017-07-26 23:24 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 08/13] xen/pvcalls: implement sendmsg Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 09/13] xen/pvcalls: implement recvmsg Stefano Stabellini
2017-07-26 21:21 ` Boris Ostrovsky
2017-07-26 21:33 ` [Xen-devel] " Boris Ostrovsky
2017-07-27 0:08 ` Stefano Stabellini
2017-07-27 14:59 ` Boris Ostrovsky
2017-07-31 22:26 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 10/13] xen/pvcalls: implement poll command Stefano Stabellini
2017-07-26 23:23 ` Boris Ostrovsky
2017-07-27 0:21 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 11/13] xen/pvcalls: implement release command Stefano Stabellini
2017-07-27 18:39 ` Boris Ostrovsky
2017-07-31 22:34 ` Stefano Stabellini
2017-08-01 15:23 ` Boris Ostrovsky
2017-08-01 15:34 ` Juergen Gross
2017-08-01 15:57 ` Boris Ostrovsky
2017-09-11 23:56 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 12/13] xen/pvcalls: implement frontend disconnect Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e74cb011-176e-f1ae-b1e6-be56fbb05d6b@oracle.com \
--to=boris.ostrovsky@oracle.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sstabellini@kernel.org \
--cc=stefano@aporeto.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).