[PATCH] media: vidioc-queryctrl.rst: clarify combining READ_ONLY with WRITE_ONLY

[PATCH] media: vidioc-queryctrl.rst: clarify combining READ_ONLY with WRITE_ONLY

[Helen Koike]

Make it clear in the documentation that V4L2_CTRL_FLAG_READ_ONLY doesn't
conflict with V4L2_CTRL_FLAG_WRITE_ONLY. Also make it clear that
if both are combined then the control has read and write permissions.

Signed-off-by: Helen Koike <helen.koike@collabora.com>

---
Hi,

v4l2-compliance expects both flags for read and write permissions, so I
would like to make it clear in the docs.
Please let me know if this is not the case.

Thanks
Helen
---
 Documentation/media/uapi/v4l/vidioc-queryctrl.rst | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index a3d56ffbf4cc..1d3aecdf679f 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -500,6 +500,11 @@ See also the examples in :ref:`control`.
       - 0x0004
       - This control is permanently readable only. Any attempt to change
 	the control will result in an ``EINVAL`` error code.
+
+	.. note::
+
+	   If combined with ``V4L2_CTRL_FLAG_WRITE_ONLY``, then both, read
+	   and write are allowed.
     * - ``V4L2_CTRL_FLAG_UPDATE``
       - 0x0008
       - A hint that changing this control may affect the value of other
@@ -523,6 +528,11 @@ See also the examples in :ref:`control`.
 	where writing a value will cause the device to carry out a given
 	action (e. g. motor control) but no meaningful value can be
 	returned.
+
+	.. note::
+
+	   If combined with ``V4L2_CTRL_FLAG_READ_ONLY``, then both, read
+	   and write are allowed.
     * - ``V4L2_CTRL_FLAG_VOLATILE``
       - 0x0080
       - This control is volatile, which means that the value of the
-- 
2.22.0

Re: [PATCH] media: vidioc-queryctrl.rst: clarify combining READ_ONLY with WRITE_ONLY

[Hans Verkuil]

On 9/25/19 5:09 PM, Helen Koike wrote:
> Make it clear in the documentation that V4L2_CTRL_FLAG_READ_ONLY doesn't
> conflict with V4L2_CTRL_FLAG_WRITE_ONLY. Also make it clear that
> if both are combined then the control has read and write permissions.

That doesn't look right.

This is the test in v4l2-compliance:

__u32 rw_mask = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;

if ((fl & rw_mask) == rw_mask)
	return fail("can't read nor write this control\n");

If both flags are set, then a fail is reported.

Did you mis-read?

Setting both flags makes no sense.

Regards,

	Hans

> 
> Signed-off-by: Helen Koike <helen.koike@collabora.com>
> 
> ---
> Hi,
> 
> v4l2-compliance expects both flags for read and write permissions, so I
> would like to make it clear in the docs.
> Please let me know if this is not the case.
> 
> Thanks
> Helen
> ---
>  Documentation/media/uapi/v4l/vidioc-queryctrl.rst | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
> index a3d56ffbf4cc..1d3aecdf679f 100644
> --- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
> +++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
> @@ -500,6 +500,11 @@ See also the examples in :ref:`control`.
>        - 0x0004
>        - This control is permanently readable only. Any attempt to change
>  	the control will result in an ``EINVAL`` error code.
> +
> +	.. note::
> +
> +	   If combined with ``V4L2_CTRL_FLAG_WRITE_ONLY``, then both, read
> +	   and write are allowed.
>      * - ``V4L2_CTRL_FLAG_UPDATE``
>        - 0x0008
>        - A hint that changing this control may affect the value of other
> @@ -523,6 +528,11 @@ See also the examples in :ref:`control`.
>  	where writing a value will cause the device to carry out a given
>  	action (e. g. motor control) but no meaningful value can be
>  	returned.
> +
> +	.. note::
> +
> +	   If combined with ``V4L2_CTRL_FLAG_READ_ONLY``, then both, read
> +	   and write are allowed.
>      * - ``V4L2_CTRL_FLAG_VOLATILE``
>        - 0x0080
>        - This control is volatile, which means that the value of the
> 

Re: [PATCH] media: vidioc-queryctrl.rst: clarify combining READ_ONLY with WRITE_ONLY

[Helen Koike]

Hi Hans

On 9/25/19 12:17 PM, Hans Verkuil wrote:
> On 9/25/19 5:09 PM, Helen Koike wrote:
>> Make it clear in the documentation that V4L2_CTRL_FLAG_READ_ONLY doesn't
>> conflict with V4L2_CTRL_FLAG_WRITE_ONLY. Also make it clear that
>> if both are combined then the control has read and write permissions.
> 
> That doesn't look right.
> 
> This is the test in v4l2-compliance:
> 
> __u32 rw_mask = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
> 
> if ((fl & rw_mask) == rw_mask)
> 	return fail("can't read nor write this control\n");
> 
> If both flags are set, then a fail is reported.
> 
> Did you mis-read?
> 
> Setting both flags makes no sense.

Maybe I misunderstood the V4L2_CTRL_TYPE_CTRL_CLASS, from v4l2-compliance:

	case V4L2_CTRL_TYPE_CTRL_CLASS:
		if (fl != (V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY))
			return fail("invalid flags for control class\n");

I was confused why vivid was using both flags in vivid_ctrl_class (and also the debayer patch that was following this model).

Why both flags are expected when this type is used?

Thanks,
Helen

> 
> Regards,
> 
> 	Hans
> 
>>
>> Signed-off-by: Helen Koike <helen.koike@collabora.com>
>>
>> ---
>> Hi,
>>
>> v4l2-compliance expects both flags for read and write permissions, so I
>> would like to make it clear in the docs.
>> Please let me know if this is not the case.
>>
>> Thanks
>> Helen
>> ---
>>  Documentation/media/uapi/v4l/vidioc-queryctrl.rst | 10 ++++++++++
>>  1 file changed, 10 insertions(+)
>>
>> diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
>> index a3d56ffbf4cc..1d3aecdf679f 100644
>> --- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
>> +++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
>> @@ -500,6 +500,11 @@ See also the examples in :ref:`control`.
>>        - 0x0004
>>        - This control is permanently readable only. Any attempt to change
>>  	the control will result in an ``EINVAL`` error code.
>> +
>> +	.. note::
>> +
>> +	   If combined with ``V4L2_CTRL_FLAG_WRITE_ONLY``, then both, read
>> +	   and write are allowed.
>>      * - ``V4L2_CTRL_FLAG_UPDATE``
>>        - 0x0008
>>        - A hint that changing this control may affect the value of other
>> @@ -523,6 +528,11 @@ See also the examples in :ref:`control`.
>>  	where writing a value will cause the device to carry out a given
>>  	action (e. g. motor control) but no meaningful value can be
>>  	returned.
>> +
>> +	.. note::
>> +
>> +	   If combined with ``V4L2_CTRL_FLAG_READ_ONLY``, then both, read
>> +	   and write are allowed.
>>      * - ``V4L2_CTRL_FLAG_VOLATILE``
>>        - 0x0080
>>        - This control is volatile, which means that the value of the
>>
> 

Re: [PATCH] media: vidioc-queryctrl.rst: clarify combining READ_ONLY with WRITE_ONLY

[Hans Verkuil]

On 9/25/19 6:29 PM, Helen Koike wrote:
> Hi Hans
> 
> On 9/25/19 12:17 PM, Hans Verkuil wrote:
>> On 9/25/19 5:09 PM, Helen Koike wrote:
>>> Make it clear in the documentation that V4L2_CTRL_FLAG_READ_ONLY doesn't
>>> conflict with V4L2_CTRL_FLAG_WRITE_ONLY. Also make it clear that
>>> if both are combined then the control has read and write permissions.
>>
>> That doesn't look right.
>>
>> This is the test in v4l2-compliance:
>>
>> __u32 rw_mask = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
>>
>> if ((fl & rw_mask) == rw_mask)
>> 	return fail("can't read nor write this control\n");
>>
>> If both flags are set, then a fail is reported.
>>
>> Did you mis-read?
>>
>> Setting both flags makes no sense.
> 
> Maybe I misunderstood the V4L2_CTRL_TYPE_CTRL_CLASS, from v4l2-compliance:
> 
> 	case V4L2_CTRL_TYPE_CTRL_CLASS:
> 		if (fl != (V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY))
> 			return fail("invalid flags for control class\n");
> 
> I was confused why vivid was using both flags in vivid_ctrl_class (and also the debayer patch that was following this model).
> 
> Why both flags are expected when this type is used?

Ah, now I understand. This is specific to control classes: such controls cannot
be read nor written. They just provide a name for the control class, but both
G_CTRL and S_CTRL should fail.

So this specific combination of flags is specific to control classes only.

This works because a 'get' will fail if WRITE_ONLY is set, and a 'set' will fail
if READ_ONLY is set. Setting both flags will cause both 'get' and 'set' to fail.

It is admittedly a bit confusing.

Regards,

	Hans

> 
> Thanks,
> Helen
> 
>>
>> Regards,
>>
>> 	Hans
>>
>>>
>>> Signed-off-by: Helen Koike <helen.koike@collabora.com>
>>>
>>> ---
>>> Hi,
>>>
>>> v4l2-compliance expects both flags for read and write permissions, so I
>>> would like to make it clear in the docs.
>>> Please let me know if this is not the case.
>>>
>>> Thanks
>>> Helen
>>> ---
>>>  Documentation/media/uapi/v4l/vidioc-queryctrl.rst | 10 ++++++++++
>>>  1 file changed, 10 insertions(+)
>>>
>>> diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
>>> index a3d56ffbf4cc..1d3aecdf679f 100644
>>> --- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
>>> +++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
>>> @@ -500,6 +500,11 @@ See also the examples in :ref:`control`.
>>>        - 0x0004
>>>        - This control is permanently readable only. Any attempt to change
>>>  	the control will result in an ``EINVAL`` error code.
>>> +
>>> +	.. note::
>>> +
>>> +	   If combined with ``V4L2_CTRL_FLAG_WRITE_ONLY``, then both, read
>>> +	   and write are allowed.
>>>      * - ``V4L2_CTRL_FLAG_UPDATE``
>>>        - 0x0008
>>>        - A hint that changing this control may affect the value of other
>>> @@ -523,6 +528,11 @@ See also the examples in :ref:`control`.
>>>  	where writing a value will cause the device to carry out a given
>>>  	action (e. g. motor control) but no meaningful value can be
>>>  	returned.
>>> +
>>> +	.. note::
>>> +
>>> +	   If combined with ``V4L2_CTRL_FLAG_READ_ONLY``, then both, read
>>> +	   and write are allowed.
>>>      * - ``V4L2_CTRL_FLAG_VOLATILE``
>>>        - 0x0080
>>>        - This control is volatile, which means that the value of the
>>>
>>