* [PATCH v3] Skip phy initialization for DWC3 USB Controllers
@ 2021-12-01 6:15 Sandeep Maheswaram
2021-12-01 6:15 ` [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller Sandeep Maheswaram
2021-12-02 3:14 ` [PATCH v3] Skip phy initialization for DWC3 USB Controllers Stephen Boyd
0 siblings, 2 replies; 7+ messages in thread
From: Sandeep Maheswaram @ 2021-12-01 6:15 UTC (permalink / raw)
To: Greg Kroah-Hartman, Felipe Balbi, Stephen Boyd, Doug Anderson,
Matthias Kaehlcke, Mathias Nyman
Cc: linux-arm-msm, linux-usb, linux-kernel, quic_pkondeti,
quic_ppratap, Sandeep Maheswaram
Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
Runtime suspend of phy drivers was failing from DWC3 driver as
runtime usage value is 2 because the phy is initialized from
DWC3 core and HCD core.
DWC3 manages phy in their core drivers.
Set this quirk to avoid phy initialization in HCD core.
v3:
Dropped the dt property and binding.
Checking for dwc3 compatible in xhci to set the quirk XHCI_SKIP_PHY_INIT.
v2:
Updated the commit descriptions.
Changed subject prefix from dwc to dwc3.
Increased props array size.
Sandeep Maheswaram (1):
usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
drivers/usb/host/xhci-plat.c | 3 +++
1 file changed, 3 insertions(+)
--
2.7.4
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
2021-12-01 6:15 [PATCH v3] Skip phy initialization for DWC3 USB Controllers Sandeep Maheswaram
@ 2021-12-01 6:15 ` Sandeep Maheswaram
2021-12-02 3:17 ` Stephen Boyd
2021-12-13 13:57 ` Greg Kroah-Hartman
2021-12-02 3:14 ` [PATCH v3] Skip phy initialization for DWC3 USB Controllers Stephen Boyd
1 sibling, 2 replies; 7+ messages in thread
From: Sandeep Maheswaram @ 2021-12-01 6:15 UTC (permalink / raw)
To: Greg Kroah-Hartman, Felipe Balbi, Stephen Boyd, Doug Anderson,
Matthias Kaehlcke, Mathias Nyman
Cc: linux-arm-msm, linux-usb, linux-kernel, quic_pkondeti,
quic_ppratap, Sandeep Maheswaram
Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
Runtime suspend of phy drivers was failing from DWC3 driver as
runtime usage value is 2 because the phy is initialized from
DWC3 core and HCD core.
DWC3 manages phy in their core drivers.
Set this quirk to avoid phy initialization in HCD core.
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
---
drivers/usb/host/xhci-plat.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index c1edcc9..9bbd939 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -327,6 +327,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
&xhci->imod_interval);
}
+ if (of_device_is_compatible(pdev->dev.parent->of_node, "snps,dwc3"))
+ xhci->quirks |= XHCI_SKIP_PHY_INIT;
+
hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
ret = PTR_ERR(hcd->usb_phy);
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3] Skip phy initialization for DWC3 USB Controllers
2021-12-01 6:15 [PATCH v3] Skip phy initialization for DWC3 USB Controllers Sandeep Maheswaram
2021-12-01 6:15 ` [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller Sandeep Maheswaram
@ 2021-12-02 3:14 ` Stephen Boyd
1 sibling, 0 replies; 7+ messages in thread
From: Stephen Boyd @ 2021-12-02 3:14 UTC (permalink / raw)
To: Doug Anderson, Felipe Balbi, Greg Kroah-Hartman, Mathias Nyman,
Matthias Kaehlcke, Sandeep Maheswaram
Cc: linux-arm-msm, linux-usb, linux-kernel, quic_pkondeti, quic_ppratap
Quoting Sandeep Maheswaram (2021-11-30 22:15:37)
> Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
> Runtime suspend of phy drivers was failing from DWC3 driver as
> runtime usage value is 2 because the phy is initialized from
> DWC3 core and HCD core.
> DWC3 manages phy in their core drivers.
> Set this quirk to avoid phy initialization in HCD core.
Don't think we need a cover letter for a single patch.
>
> v3:
> Dropped the dt property and binding.
> Checking for dwc3 compatible in xhci to set the quirk XHCI_SKIP_PHY_INIT.
>
> v2:
> Updated the commit descriptions.
> Changed subject prefix from dwc to dwc3.
> Increased props array size.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
2021-12-01 6:15 ` [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller Sandeep Maheswaram
@ 2021-12-02 3:17 ` Stephen Boyd
2021-12-14 4:47 ` Sandeep Maheswaram
2021-12-13 13:57 ` Greg Kroah-Hartman
1 sibling, 1 reply; 7+ messages in thread
From: Stephen Boyd @ 2021-12-02 3:17 UTC (permalink / raw)
To: Doug Anderson, Felipe Balbi, Greg Kroah-Hartman, Mathias Nyman,
Matthias Kaehlcke, Sandeep Maheswaram
Cc: linux-arm-msm, linux-usb, linux-kernel, quic_pkondeti, quic_ppratap
Quoting Sandeep Maheswaram (2021-11-30 22:15:38)
> Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
> Runtime suspend of phy drivers was failing from DWC3 driver as
> runtime usage value is 2 because the phy is initialized from
> DWC3 core and HCD core.
> DWC3 manages phy in their core drivers.
This looks wrapped weirdly.
> Set this quirk to avoid phy initialization in HCD core.
>
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Any Fixes tag?
> ---
> drivers/usb/host/xhci-plat.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index c1edcc9..9bbd939 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -327,6 +327,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
> &xhci->imod_interval);
> }
>
> + if (of_device_is_compatible(pdev->dev.parent->of_node, "snps,dwc3"))
Are we sure that pdev->dev.parent isn't NULL here?
> + xhci->quirks |= XHCI_SKIP_PHY_INIT;
> +
> hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
> if (IS_ERR(hcd->usb_phy)) {
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
2021-12-01 6:15 ` [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller Sandeep Maheswaram
2021-12-02 3:17 ` Stephen Boyd
@ 2021-12-13 13:57 ` Greg Kroah-Hartman
1 sibling, 0 replies; 7+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 13:57 UTC (permalink / raw)
To: Sandeep Maheswaram
Cc: Felipe Balbi, Stephen Boyd, Doug Anderson, Matthias Kaehlcke,
Mathias Nyman, linux-arm-msm, linux-usb, linux-kernel,
quic_pkondeti, quic_ppratap
On Wed, Dec 01, 2021 at 11:45:38AM +0530, Sandeep Maheswaram wrote:
> Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
> Runtime suspend of phy drivers was failing from DWC3 driver as
> runtime usage value is 2 because the phy is initialized from
> DWC3 core and HCD core.
> DWC3 manages phy in their core drivers.
> Set this quirk to avoid phy initialization in HCD core.
>
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
> ---
> drivers/usb/host/xhci-plat.c | 3 +++
> 1 file changed, 3 insertions(+)
What changed from previous versions of this patch? That goes below the
--- line always, right?
Please fix up and send a v4.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
2021-12-02 3:17 ` Stephen Boyd
@ 2021-12-14 4:47 ` Sandeep Maheswaram
2021-12-15 1:02 ` Stephen Boyd
0 siblings, 1 reply; 7+ messages in thread
From: Sandeep Maheswaram @ 2021-12-14 4:47 UTC (permalink / raw)
To: Stephen Boyd, Doug Anderson, Felipe Balbi, Greg Kroah-Hartman,
Mathias Nyman, Matthias Kaehlcke
Cc: linux-arm-msm, linux-usb, linux-kernel, quic_pkondeti, quic_ppratap
On 12/2/2021 8:47 AM, Stephen Boyd wrote:
> Quoting Sandeep Maheswaram (2021-11-30 22:15:38)
>> Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
>> Runtime suspend of phy drivers was failing from DWC3 driver as
>> runtime usage value is 2 because the phy is initialized from
>> DWC3 core and HCD core.
>> DWC3 manages phy in their core drivers.
> This looks wrapped weirdly.
>
>> Set this quirk to avoid phy initialization in HCD core.
>>
>> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
> Any Fixes tag?
Not sure about the commit id to be used here.
>
>> ---
>> drivers/usb/host/xhci-plat.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index c1edcc9..9bbd939 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -327,6 +327,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
>> &xhci->imod_interval);
>> }
>>
>> + if (of_device_is_compatible(pdev->dev.parent->of_node, "snps,dwc3"))
> Are we sure that pdev->dev.parent isn't NULL here?
+ if (of_device_is_compatible(to_of_node(sysdev->fwnode), "snps,dwc3"))
Will this be ok ?
>
>> + xhci->quirks |= XHCI_SKIP_PHY_INIT;
>> +
>> hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
>> if (IS_ERR(hcd->usb_phy)) {
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
2021-12-14 4:47 ` Sandeep Maheswaram
@ 2021-12-15 1:02 ` Stephen Boyd
0 siblings, 0 replies; 7+ messages in thread
From: Stephen Boyd @ 2021-12-15 1:02 UTC (permalink / raw)
To: Doug Anderson, Felipe Balbi, Greg Kroah-Hartman, Mathias Nyman,
Matthias Kaehlcke, Sandeep Maheswaram
Cc: linux-arm-msm, linux-usb, linux-kernel, quic_pkondeti, quic_ppratap
Quoting Sandeep Maheswaram (2021-12-13 20:47:48)
>
> On 12/2/2021 8:47 AM, Stephen Boyd wrote:
> > Quoting Sandeep Maheswaram (2021-11-30 22:15:38)
> >> Set XHCI_SKIP_PHY_INIT quirk to avoid phy initialization twice.
> >> Runtime suspend of phy drivers was failing from DWC3 driver as
> >> runtime usage value is 2 because the phy is initialized from
> >> DWC3 core and HCD core.
> >> DWC3 manages phy in their core drivers.
> > This looks wrapped weirdly.
> >
> >> Set this quirk to avoid phy initialization in HCD core.
> >>
> >> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
> > Any Fixes tag?
> Not sure about the commit id to be used here.
Maybe whenever the phy started being initialized twice?
> >
> >> ---
> >> drivers/usb/host/xhci-plat.c | 3 +++
> >> 1 file changed, 3 insertions(+)
> >>
> >> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> >> index c1edcc9..9bbd939 100644
> >> --- a/drivers/usb/host/xhci-plat.c
> >> +++ b/drivers/usb/host/xhci-plat.c
> >> @@ -327,6 +327,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
> >> &xhci->imod_interval);
> >> }
> >>
> >> + if (of_device_is_compatible(pdev->dev.parent->of_node, "snps,dwc3"))
> > Are we sure that pdev->dev.parent isn't NULL here?
>
> + if (of_device_is_compatible(to_of_node(sysdev->fwnode), "snps,dwc3"))
>
> Will this be ok ?
Probably? But I see this function already uses 'sysdev->of_node' so
that's probably all that's necessary assuming sysdev == pdev->dev.parent
in this case.
if (of_device_is_compatible(sysdev->of_node, "snps,dwc3"))
>
> >
> >> + xhci->quirks |= XHCI_SKIP_PHY_INIT;
> >> +
> >> hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
> >> if (IS_ERR(hcd->usb_phy)) {
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-12-15 1:04 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-01 6:15 [PATCH v3] Skip phy initialization for DWC3 USB Controllers Sandeep Maheswaram
2021-12-01 6:15 ` [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller Sandeep Maheswaram
2021-12-02 3:17 ` Stephen Boyd
2021-12-14 4:47 ` Sandeep Maheswaram
2021-12-15 1:02 ` Stephen Boyd
2021-12-13 13:57 ` Greg Kroah-Hartman
2021-12-02 3:14 ` [PATCH v3] Skip phy initialization for DWC3 USB Controllers Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).