[PATCH v3 1/5] dt-bindings : Document the STM32F4 CRC32 binding

[PATCH v3 1/5] dt-bindings : Document the STM32F4 CRC32 binding

[Cosar Dindar]

Add device tree binding for STM32F4.

Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
---
 Documentation/devicetree/bindings/crypto/st,stm32-crc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
index 3ba92a5..7b30f1e 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
@@ -1,7 +1,7 @@
 * STMicroelectronics STM32 CRC
 
 Required properties:
-- compatible: Should be "st,stm32f7-crc".
+- compatible: Can be either "st,stm32f7-crc" or "st,srm32f4-crc".
 - reg: The address and length of the peripheral registers space
 - clocks: The input clock of the CRC instance
 
@@ -10,7 +10,7 @@ Optional properties: none
 Example:
 
 crc: crc@40023000 {
-	compatible = "st,stm32f7-crc";
+	compatible = "st,stm32f7-crc", "st,stm32f4-crc";
 	reg = <0x40023000 0x400>;
 	clocks = <&rcc 0 12>;
 };
-- 
2.7.4

[PATCH v3 2/5] crypto : stm32 - Add STM32F4 CRC32 support

[Cosar Dindar]

This patch adds CRC (CRC32 Crypto) support for STM32F4 series.

As an hardware limitation polynomial and key setting are not supported.
They are fixed as 0x4C11DB7 (poly) and 0xFFFFFFFF (key).
CRC32C Castagnoli algorithm is not used.

Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
---
 drivers/crypto/stm32/stm32_crc32.c | 68 ++++++++++++++++++++++++++++++++------
 1 file changed, 58 insertions(+), 10 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
index ec83b1e..12fbd98 100644
--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -7,6 +7,7 @@
 #include <linux/bitrev.h>
 #include <linux/clk.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 
 #include <crypto/internal/hash.h>
@@ -39,6 +40,9 @@ struct stm32_crc {
 	struct clk       *clk;
 	u8               pending_data[sizeof(u32)];
 	size_t           nb_pending_bytes;
+	bool             key_support;
+	bool             poly_support;
+	bool             reverse_support;
 };
 
 struct stm32_crc_list {
@@ -106,13 +110,31 @@ static int stm32_crc_init(struct shash_desc *desc)
 	}
 	spin_unlock_bh(&crc_list.lock);
 
-	/* Reset, set key, poly and configure in bit reverse mode */
-	writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
-	writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
-	writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
+	/* set key */
+	if (ctx->crc->key_support) {
+		writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
+	} else if (mctx->key != CRC_INIT_DEFAULT) {
+		dev_err(ctx->crc->dev, "Unsupported key value! Should be: 0x%x\n",
+			CRC_INIT_DEFAULT);
+		return -EINVAL;
+	}
+
+	/* set poly */
+	if (ctx->crc->poly_support)
+		writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
+
+	/* reset and configure in bit reverse mode if supported */
+	if (ctx->crc->reverse_support)
+		writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
+	else
+		writel(CRC_CR_RESET, ctx->crc->regs + CRC_CR);
+
+	/* store partial result */
+	if (!ctx->crc->reverse_support)
+		ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
+	else
+		ctx->partial = readl(ctx->crc->regs + CRC_DR);
 
-	/* Store partial result */
-	ctx->partial = readl(ctx->crc->regs + CRC_DR);
 	ctx->crc->nb_pending_bytes = 0;
 
 	return 0;
@@ -135,7 +157,12 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 
 		if (crc->nb_pending_bytes == sizeof(u32)) {
 			/* Process completed pending data */
-			writel(*(u32 *)crc->pending_data, crc->regs + CRC_DR);
+			if (!ctx->crc->reverse_support)
+				writel(bitrev32(*(u32 *)crc->pending_data),
+				       crc->regs + CRC_DR);
+			else
+				writel(*(u32 *)crc->pending_data,
+				       crc->regs + CRC_DR);
 			crc->nb_pending_bytes = 0;
 		}
 	}
@@ -143,10 +170,16 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	d32 = (u32 *)d8;
 	for (i = 0; i < length >> 2; i++)
 		/* Process 32 bits data */
-		writel(*(d32++), crc->regs + CRC_DR);
+		if (!ctx->crc->reverse_support)
+			writel(bitrev32(*(d32++)), crc->regs + CRC_DR);
+		else
+			writel(*(d32++), crc->regs + CRC_DR);
 
 	/* Store partial result */
-	ctx->partial = readl(crc->regs + CRC_DR);
+	if (!ctx->crc->reverse_support)
+		ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
+	else
+		ctx->partial = readl(crc->regs + CRC_DR);
 
 	/* Check for pending data (non 32 bits) */
 	length &= 3;
@@ -243,6 +276,7 @@ static int stm32_crc_probe(struct platform_device *pdev)
 	struct stm32_crc *crc;
 	struct resource *res;
 	int ret;
+	int algs_size;
 
 	crc = devm_kzalloc(dev, sizeof(*crc), GFP_KERNEL);
 	if (!crc)
@@ -269,13 +303,26 @@ static int stm32_crc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	/* set key, poly and reverse support if device is of F7 series */
+	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f7-crc")) {
+		crc->key_support = true;
+		crc->poly_support = true;
+		crc->reverse_support = true;
+	}
+
 	platform_set_drvdata(pdev, crc);
 
 	spin_lock(&crc_list.lock);
 	list_add(&crc->list, &crc_list.dev_list);
 	spin_unlock(&crc_list.lock);
 
-	ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
+	/* For F4 series only CRC32 algorithm will be used */
+	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f4-crc"))
+		algs_size = 1;
+	else
+		algs_size = ARRAY_SIZE(algs);
+
+	ret = crypto_register_shashes(algs, algs_size);
 	if (ret) {
 		dev_err(dev, "Failed to register\n");
 		clk_disable_unprepare(crc->clk);
@@ -304,6 +351,7 @@ static int stm32_crc_remove(struct platform_device *pdev)
 
 static const struct of_device_id stm32_dt_ids[] = {
 	{ .compatible = "st,stm32f7-crc", },
+	{ .compatible = "st,stm32f4-crc", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, stm32_dt_ids);
-- 
2.7.4

[PATCH v3 3/5] ARM: dts: stm32: Add CRC support to stm32f429

[Cosar Dindar]

Add CRC32 Crypto support to stm32f429.

Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index b2a2b5c..18343de 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -766,6 +766,13 @@
 			};
 		};
 
+		crc: crc@40023000 {
+			compatible = "st,stm32f4-crc";
+			reg = <0x40023000 0x400>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>;
+			status = "disabled";
+		};
+
 		rcc: rcc@40023810 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
-- 
2.7.4

[PATCH v3 4/5] ARM: dts: stm32: enable CRC32 on stm32429-disco board

[Cosar Dindar]

Enable the CRC32 crypto on stm32429-disco board.

Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
---
 arch/arm/boot/dts/stm32f429-disco.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 191fa50..ae47cde 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -102,6 +102,10 @@
 	clock-frequency = <8000000>;
 };
 
+&crc {
+	status = "okay";
+};
+
 &rtc {
 	assigned-clocks = <&rcc 1 CLK_RTC>;
 	assigned-clock-parents = <&rcc 1 CLK_LSI>;
-- 
2.7.4

[PATCH v3 5/5] ARM: dts: stm32: enable CRC32 on stm32429i-eval board

[Cosar Dindar]

Enable the CRC32 crypto on stm32429i-eval board.

Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
---
 arch/arm/boot/dts/stm32429i-eval.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index b633114..360fb19 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -141,6 +141,10 @@
 	clock-frequency = <25000000>;
 };
 
+&crc {
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";
-- 
2.7.4

Re: [PATCH v3 3/5] ARM: dts: stm32: Add CRC support to stm32f429

[Alexandre Torgue]

On 05/22/2017 04:34 PM, Cosar Dindar wrote:
> Add CRC32 Crypto support to stm32f429.
>
> Signed-off-by: Cosar Dindar <cosardindar@gmail.com>

Will be applied in STM32 branch for next pull request.

Thanks
Alex

> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index b2a2b5c..18343de 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -766,6 +766,13 @@
>  			};
>  		};
>
> +		crc: crc@40023000 {
> +			compatible = "st,stm32f4-crc";
> +			reg = <0x40023000 0x400>;
> +			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>;
> +			status = "disabled";
> +		};
> +
>  		rcc: rcc@40023810 {
>  			#reset-cells = <1>;
>  			#clock-cells = <2>;
>

Re: [PATCH v3 4/5] ARM: dts: stm32: enable CRC32 on stm32429-disco board

[Alexandre Torgue]

On 05/22/2017 04:34 PM, Cosar Dindar wrote:
> Enable the CRC32 crypto on stm32429-disco board.
>
> Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
> ---


Will be applied in STM32 branch for next pull request.

Thanks
Alex

>  arch/arm/boot/dts/stm32f429-disco.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
> index 191fa50..ae47cde 100644
> --- a/arch/arm/boot/dts/stm32f429-disco.dts
> +++ b/arch/arm/boot/dts/stm32f429-disco.dts
> @@ -102,6 +102,10 @@
>  	clock-frequency = <8000000>;
>  };
>
> +&crc {
> +	status = "okay";
> +};
> +
>  &rtc {
>  	assigned-clocks = <&rcc 1 CLK_RTC>;
>  	assigned-clock-parents = <&rcc 1 CLK_LSI>;
>

Re: [PATCH v3 5/5] ARM: dts: stm32: enable CRC32 on stm32429i-eval board

[Alexandre Torgue]

On 05/22/2017 04:35 PM, Cosar Dindar wrote:
> Enable the CRC32 crypto on stm32429i-eval board.
>
> Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
> ---

Will be applied in STM32 branch for next pull request.

Thanks
Alex

>  arch/arm/boot/dts/stm32429i-eval.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
> index b633114..360fb19 100644
> --- a/arch/arm/boot/dts/stm32429i-eval.dts
> +++ b/arch/arm/boot/dts/stm32429i-eval.dts
> @@ -141,6 +141,10 @@
>  	clock-frequency = <25000000>;
>  };
>
> +&crc {
> +	status = "okay";
> +};
> +
>  &i2c1 {
>  	pinctrl-0 = <&i2c1_pins>;
>  	pinctrl-names = "default";
>

Re: [PATCH v3 2/5] crypto : stm32 - Add STM32F4 CRC32 support

[Fabien DESSENNE]

Hi Cosar,

Thank you for the patch

On 22/05/17 16:34, Cosar Dindar wrote:
> This patch adds CRC (CRC32 Crypto) support for STM32F4 series.
>
> As an hardware limitation polynomial and key setting are not supported.
> They are fixed as 0x4C11DB7 (poly) and 0xFFFFFFFF (key).
> CRC32C Castagnoli algorithm is not used.
>
> Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
> ---
>   drivers/crypto/stm32/stm32_crc32.c | 68 ++++++++++++++++++++++++++++++++------
>   1 file changed, 58 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
> index ec83b1e..12fbd98 100644
> --- a/drivers/crypto/stm32/stm32_crc32.c
> +++ b/drivers/crypto/stm32/stm32_crc32.c
> @@ -7,6 +7,7 @@
>   #include <linux/bitrev.h>
>   #include <linux/clk.h>
>   #include <linux/module.h>
> +#include <linux/of.h>
>   #include <linux/platform_device.h>
>   
>   #include <crypto/internal/hash.h>
> @@ -39,6 +40,9 @@ struct stm32_crc {
>   	struct clk       *clk;
>   	u8               pending_data[sizeof(u32)];
>   	size_t           nb_pending_bytes;
> +	bool             key_support;
> +	bool             poly_support;
> +	bool             reverse_support;
>   };
>   
>   struct stm32_crc_list {
> @@ -106,13 +110,31 @@ static int stm32_crc_init(struct shash_desc *desc)
>   	}
>   	spin_unlock_bh(&crc_list.lock);
>   
> -	/* Reset, set key, poly and configure in bit reverse mode */
> -	writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
> -	writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
> -	writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
> +	/* set key */
> +	if (ctx->crc->key_support) {
> +		writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
> +	} else if (mctx->key != CRC_INIT_DEFAULT) {
> +		dev_err(ctx->crc->dev, "Unsupported key value! Should be: 0x%x\n",
> +			CRC_INIT_DEFAULT);
> +		return -EINVAL;
> +	}
> +
> +	/* set poly */
> +	if (ctx->crc->poly_support)
> +		writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
> +
> +	/* reset and configure in bit reverse mode if supported */
> +	if (ctx->crc->reverse_support)
> +		writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
> +	else
> +		writel(CRC_CR_RESET, ctx->crc->regs + CRC_CR);
> +
> +	/* store partial result */
> +	if (!ctx->crc->reverse_support)
> +		ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
> +	else
> +		ctx->partial = readl(ctx->crc->regs + CRC_DR);
>   
> -	/* Store partial result */
> -	ctx->partial = readl(ctx->crc->regs + CRC_DR);
>   	ctx->crc->nb_pending_bytes = 0;
>   
>   	return 0;
> @@ -135,7 +157,12 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
>   
>   		if (crc->nb_pending_bytes == sizeof(u32)) {
>   			/* Process completed pending data */
> -			writel(*(u32 *)crc->pending_data, crc->regs + CRC_DR);
> +			if (!ctx->crc->reverse_support)
> +				writel(bitrev32(*(u32 *)crc->pending_data),
> +				       crc->regs + CRC_DR);
> +			else
> +				writel(*(u32 *)crc->pending_data,
> +				       crc->regs + CRC_DR);
>   			crc->nb_pending_bytes = 0;
>   		}
>   	}
> @@ -143,10 +170,16 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
>   	d32 = (u32 *)d8;
>   	for (i = 0; i < length >> 2; i++)
>   		/* Process 32 bits data */
> -		writel(*(d32++), crc->regs + CRC_DR);
> +		if (!ctx->crc->reverse_support)
> +			writel(bitrev32(*(d32++)), crc->regs + CRC_DR);
> +		else
> +			writel(*(d32++), crc->regs + CRC_DR);
>   
>   	/* Store partial result */
> -	ctx->partial = readl(crc->regs + CRC_DR);
> +	if (!ctx->crc->reverse_support)
> +		ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
> +	else
> +		ctx->partial = readl(crc->regs + CRC_DR);
>   
>   	/* Check for pending data (non 32 bits) */
>   	length &= 3;
> @@ -243,6 +276,7 @@ static int stm32_crc_probe(struct platform_device *pdev)
>   	struct stm32_crc *crc;
>   	struct resource *res;
>   	int ret;
> +	int algs_size;
>   
>   	crc = devm_kzalloc(dev, sizeof(*crc), GFP_KERNEL);
>   	if (!crc)
> @@ -269,13 +303,26 @@ static int stm32_crc_probe(struct platform_device *pdev)
>   		return ret;
>   	}
>   
> +	/* set key, poly and reverse support if device is of F7 series */
> +	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f7-crc")) {
> +		crc->key_support = true;
> +		crc->poly_support = true;
> +		crc->reverse_support = true;
> +	}
> +
>   	platform_set_drvdata(pdev, crc);
>   
>   	spin_lock(&crc_list.lock);
>   	list_add(&crc->list, &crc_list.dev_list);
>   	spin_unlock(&crc_list.lock);
>   
> -	ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
> +	/* For F4 series only CRC32 algorithm will be used */
> +	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f4-crc"))
> +		algs_size = 1;
> +	else
> +		algs_size = ARRAY_SIZE(algs);
> +
> +	ret = crypto_register_shashes(algs, algs_size);
>   	if (ret) {
>   		dev_err(dev, "Failed to register\n");
>   		clk_disable_unprepare(crc->clk);
> @@ -304,6 +351,7 @@ static int stm32_crc_remove(struct platform_device *pdev)
>   
>   static const struct of_device_id stm32_dt_ids[] = {
>   	{ .compatible = "st,stm32f7-crc", },
> +	{ .compatible = "st,stm32f4-crc", },
>   	{},
>   };
>   MODULE_DEVICE_TABLE(of, stm32_dt_ids);
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>

Re: [PATCH v3 2/5] crypto : stm32 - Add STM32F4 CRC32 support

[Cosar Dindar]

Hi Fabien,

Thanks for your review.

On Mon, May 29, 2017 at 07:56:48AM +0000, Fabien DESSENNE wrote:
> Hi Cosar,
> 
> Thank you for the patch
> 
> On 22/05/17 16:34, Cosar Dindar wrote:
> > This patch adds CRC (CRC32 Crypto) support for STM32F4 series.
> >
> > As an hardware limitation polynomial and key setting are not supported.
> > They are fixed as 0x4C11DB7 (poly) and 0xFFFFFFFF (key).
> > CRC32C Castagnoli algorithm is not used.
> >
> > Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
> > ---
> >   drivers/crypto/stm32/stm32_crc32.c | 68 ++++++++++++++++++++++++++++++++------
> >   1 file changed, 58 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
> > index ec83b1e..12fbd98 100644
> > --- a/drivers/crypto/stm32/stm32_crc32.c
> > +++ b/drivers/crypto/stm32/stm32_crc32.c
> > @@ -7,6 +7,7 @@
> >   #include <linux/bitrev.h>
> >   #include <linux/clk.h>
> >   #include <linux/module.h>
> > +#include <linux/of.h>
> >   #include <linux/platform_device.h>
> >   
> >   #include <crypto/internal/hash.h>
> > @@ -39,6 +40,9 @@ struct stm32_crc {
> >   	struct clk       *clk;
> >   	u8               pending_data[sizeof(u32)];
> >   	size_t           nb_pending_bytes;
> > +	bool             key_support;
> > +	bool             poly_support;
> > +	bool             reverse_support;
> >   };
> >   
> >   struct stm32_crc_list {
> > @@ -106,13 +110,31 @@ static int stm32_crc_init(struct shash_desc *desc)
> >   	}
> >   	spin_unlock_bh(&crc_list.lock);
> >   
> > -	/* Reset, set key, poly and configure in bit reverse mode */
> > -	writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
> > -	writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
> > -	writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
> > +	/* set key */
> > +	if (ctx->crc->key_support) {
> > +		writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
> > +	} else if (mctx->key != CRC_INIT_DEFAULT) {
> > +		dev_err(ctx->crc->dev, "Unsupported key value! Should be: 0x%x\n",
> > +			CRC_INIT_DEFAULT);
> > +		return -EINVAL;
> > +	}
> > +
> > +	/* set poly */
> > +	if (ctx->crc->poly_support)
> > +		writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
> > +
> > +	/* reset and configure in bit reverse mode if supported */
> > +	if (ctx->crc->reverse_support)
> > +		writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
> > +	else
> > +		writel(CRC_CR_RESET, ctx->crc->regs + CRC_CR);
> > +
> > +	/* store partial result */
> > +	if (!ctx->crc->reverse_support)
> > +		ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
> > +	else
> > +		ctx->partial = readl(ctx->crc->regs + CRC_DR);
> >   
> > -	/* Store partial result */
> > -	ctx->partial = readl(ctx->crc->regs + CRC_DR);
> >   	ctx->crc->nb_pending_bytes = 0;
> >   
> >   	return 0;
> > @@ -135,7 +157,12 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
> >   
> >   		if (crc->nb_pending_bytes == sizeof(u32)) {
> >   			/* Process completed pending data */
> > -			writel(*(u32 *)crc->pending_data, crc->regs + CRC_DR);
> > +			if (!ctx->crc->reverse_support)
> > +				writel(bitrev32(*(u32 *)crc->pending_data),
> > +				       crc->regs + CRC_DR);
> > +			else
> > +				writel(*(u32 *)crc->pending_data,
> > +				       crc->regs + CRC_DR);
> >   			crc->nb_pending_bytes = 0;
> >   		}
> >   	}
> > @@ -143,10 +170,16 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
> >   	d32 = (u32 *)d8;
> >   	for (i = 0; i < length >> 2; i++)
> >   		/* Process 32 bits data */
> > -		writel(*(d32++), crc->regs + CRC_DR);
> > +		if (!ctx->crc->reverse_support)
> > +			writel(bitrev32(*(d32++)), crc->regs + CRC_DR);
> > +		else
> > +			writel(*(d32++), crc->regs + CRC_DR);
> >   
> >   	/* Store partial result */
> > -	ctx->partial = readl(crc->regs + CRC_DR);
> > +	if (!ctx->crc->reverse_support)
> > +		ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
> > +	else
> > +		ctx->partial = readl(crc->regs + CRC_DR);
> >   
> >   	/* Check for pending data (non 32 bits) */
> >   	length &= 3;
> > @@ -243,6 +276,7 @@ static int stm32_crc_probe(struct platform_device *pdev)
> >   	struct stm32_crc *crc;
> >   	struct resource *res;
> >   	int ret;
> > +	int algs_size;
> >   
> >   	crc = devm_kzalloc(dev, sizeof(*crc), GFP_KERNEL);
> >   	if (!crc)
> > @@ -269,13 +303,26 @@ static int stm32_crc_probe(struct platform_device *pdev)
> >   		return ret;
> >   	}
> >   
> > +	/* set key, poly and reverse support if device is of F7 series */
> > +	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f7-crc")) {
> > +		crc->key_support = true;
> > +		crc->poly_support = true;
> > +		crc->reverse_support = true;
> > +	}
> > +
> >   	platform_set_drvdata(pdev, crc);
> >   
> >   	spin_lock(&crc_list.lock);
> >   	list_add(&crc->list, &crc_list.dev_list);
> >   	spin_unlock(&crc_list.lock);
> >   
> > -	ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
> > +	/* For F4 series only CRC32 algorithm will be used */
> > +	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f4-crc"))
> > +		algs_size = 1;
> > +	else
> > +		algs_size = ARRAY_SIZE(algs);
> > +
> > +	ret = crypto_register_shashes(algs, algs_size);
> >   	if (ret) {
> >   		dev_err(dev, "Failed to register\n");
> >   		clk_disable_unprepare(crc->clk);
> > @@ -304,6 +351,7 @@ static int stm32_crc_remove(struct platform_device *pdev)
> >   
> >   static const struct of_device_id stm32_dt_ids[] = {
> >   	{ .compatible = "st,stm32f7-crc", },
> > +	{ .compatible = "st,stm32f4-crc", },
> >   	{},
> >   };
> >   MODULE_DEVICE_TABLE(of, stm32_dt_ids);
> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>

Best Regards.
Cosar