* [PATCH] usb: host: ohci-platform: Disable ohci for rk3288 @ 2020-07-02 9:05 Jagan Teki 2020-07-02 13:26 ` Alan Stern 2020-07-02 14:38 ` Robin Murphy 0 siblings, 2 replies; 5+ messages in thread From: Jagan Teki @ 2020-07-02 9:05 UTC (permalink / raw) To: Alan Stern, Greg Kroah-Hartman, Heiko Stuebner, Rob Herring, mylene.josserand Cc: Suniel Mahesh, Michael Trimarchi, linux-usb, linux-rockchip, linux-kernel, linux-amarula, Jagan Teki, William Wu rk3288 has usb host0 ohci controller but doesn't actually work on real hardware but it works with new revision chip rk3288w. So, disable ohci for rk3288. For rk3288w chips the compatible update code is handled by bootloader. Cc: William Wu <william.wu@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Note: - U-Boot patch for compatible update https://patchwork.ozlabs.org/project/uboot/patch/20200702084820.35942-1-jagan@amarulasolutions.com/ drivers/usb/host/ohci-platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 7addfc2cbadc..24655ed6a7e0 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -96,7 +96,7 @@ static int ohci_platform_probe(struct platform_device *dev) struct ohci_hcd *ohci; int err, irq, clk = 0; - if (usb_disabled()) + if (usb_disabled() || of_machine_is_compatible("rockchip,rk3288")) return -ENODEV; /* -- 2.25.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] usb: host: ohci-platform: Disable ohci for rk3288 2020-07-02 9:05 [PATCH] usb: host: ohci-platform: Disable ohci for rk3288 Jagan Teki @ 2020-07-02 13:26 ` Alan Stern 2020-07-02 14:38 ` Robin Murphy 1 sibling, 0 replies; 5+ messages in thread From: Alan Stern @ 2020-07-02 13:26 UTC (permalink / raw) To: Jagan Teki Cc: Greg Kroah-Hartman, Heiko Stuebner, Rob Herring, mylene.josserand, Suniel Mahesh, Michael Trimarchi, linux-usb, linux-rockchip, linux-kernel, linux-amarula, William Wu On Thu, Jul 02, 2020 at 02:35:04PM +0530, Jagan Teki wrote: > rk3288 has usb host0 ohci controller but doesn't actually work > on real hardware but it works with new revision chip rk3288w. > > So, disable ohci for rk3288. > > For rk3288w chips the compatible update code is handled by bootloader. > > Cc: William Wu <william.wu@rock-chips.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Note: > - U-Boot patch for compatible update > https://patchwork.ozlabs.org/project/uboot/patch/20200702084820.35942-1-jagan@amarulasolutions.com/ > > drivers/usb/host/ohci-platform.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c > index 7addfc2cbadc..24655ed6a7e0 100644 > --- a/drivers/usb/host/ohci-platform.c > +++ b/drivers/usb/host/ohci-platform.c > @@ -96,7 +96,7 @@ static int ohci_platform_probe(struct platform_device *dev) > struct ohci_hcd *ohci; > int err, irq, clk = 0; > > - if (usb_disabled()) > + if (usb_disabled() || of_machine_is_compatible("rockchip,rk3288")) > return -ENODEV; > > /* > -- > 2.25.1 Acked-by: Alan Stern <stern@rowland.harvard.edu> ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] usb: host: ohci-platform: Disable ohci for rk3288 2020-07-02 9:05 [PATCH] usb: host: ohci-platform: Disable ohci for rk3288 Jagan Teki 2020-07-02 13:26 ` Alan Stern @ 2020-07-02 14:38 ` Robin Murphy 2020-07-03 11:39 ` Jagan Teki 1 sibling, 1 reply; 5+ messages in thread From: Robin Murphy @ 2020-07-02 14:38 UTC (permalink / raw) To: Jagan Teki, Alan Stern, Greg Kroah-Hartman, Heiko Stuebner, Rob Herring, mylene.josserand Cc: linux-usb, linux-kernel, linux-rockchip, Suniel Mahesh, William Wu, Michael Trimarchi, linux-amarula On 2020-07-02 10:05, Jagan Teki wrote: > rk3288 has usb host0 ohci controller but doesn't actually work > on real hardware but it works with new revision chip rk3288w. > > So, disable ohci for rk3288. > > For rk3288w chips the compatible update code is handled by bootloader. > > Cc: William Wu <william.wu@rock-chips.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Note: > - U-Boot patch for compatible update > https://patchwork.ozlabs.org/project/uboot/patch/20200702084820.35942-1-jagan@amarulasolutions.com/ > > drivers/usb/host/ohci-platform.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c > index 7addfc2cbadc..24655ed6a7e0 100644 > --- a/drivers/usb/host/ohci-platform.c > +++ b/drivers/usb/host/ohci-platform.c > @@ -96,7 +96,7 @@ static int ohci_platform_probe(struct platform_device *dev) > struct ohci_hcd *ohci; > int err, irq, clk = 0; > > - if (usb_disabled()) > + if (usb_disabled() || of_machine_is_compatible("rockchip,rk3288")) This seems unnecessary to me - if we've even started probing a driver for a broken piece of hardware to the point that we need magic checks to bail out again, then something is already fundamentally wrong. Old boards only sold with the original SoC variant have no reason to enable the OHCI (since it never worked originally), thus will never execute this check. New boards designed around the W variant to make use of the OHCI can freely enable it either way. The only relative-edge-case where it might matter is older board designs still in production which have shipped with both SoC variants. Enabling OHCI can't be *necessary* given that it's still broken on a lot of deployed boards, so at best it must be an opportunistic nice-to-have. Since we're already having to rely on the bootloader to patch up the devicetree for other low-level differences in this case, it should be part of that responsibility for it to only enable the OHCI on the appropriate SoC variant too. Statically enabling it in the DTS for a board where it may well not work is just bad. As soon as a DTB with a broken piece of hardware enabled gets passed to an OS, then the damage is already done. A driver patch in a future version of Linux that magically knows better and ignores it isn't going to help a user booting an older kernel image, or some other OS entirely. Robin. > return -ENODEV; > > /* > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] usb: host: ohci-platform: Disable ohci for rk3288 2020-07-02 14:38 ` Robin Murphy @ 2020-07-03 11:39 ` Jagan Teki 2020-07-03 17:08 ` Robin Murphy 0 siblings, 1 reply; 5+ messages in thread From: Jagan Teki @ 2020-07-03 11:39 UTC (permalink / raw) To: Robin Murphy Cc: Alan Stern, Greg Kroah-Hartman, Heiko Stuebner, Rob Herring, Mylène Josserand, linux-usb, linux-kernel, open list:ARM/Rockchip SoC..., Suniel Mahesh, William Wu, Michael Trimarchi, linux-amarula, Kever Yang On Thu, Jul 2, 2020 at 8:08 PM Robin Murphy <robin.murphy@arm.com> wrote: > > On 2020-07-02 10:05, Jagan Teki wrote: > > rk3288 has usb host0 ohci controller but doesn't actually work > > on real hardware but it works with new revision chip rk3288w. > > > > So, disable ohci for rk3288. > > > > For rk3288w chips the compatible update code is handled by bootloader. > > > > Cc: William Wu <william.wu@rock-chips.com> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > Note: > > - U-Boot patch for compatible update > > https://patchwork.ozlabs.org/project/uboot/patch/20200702084820.35942-1-jagan@amarulasolutions.com/ > > > > drivers/usb/host/ohci-platform.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c > > index 7addfc2cbadc..24655ed6a7e0 100644 > > --- a/drivers/usb/host/ohci-platform.c > > +++ b/drivers/usb/host/ohci-platform.c > > @@ -96,7 +96,7 @@ static int ohci_platform_probe(struct platform_device *dev) > > struct ohci_hcd *ohci; > > int err, irq, clk = 0; > > > > - if (usb_disabled()) > > + if (usb_disabled() || of_machine_is_compatible("rockchip,rk3288")) > > This seems unnecessary to me - if we've even started probing a driver > for a broken piece of hardware to the point that we need magic checks to > bail out again, then something is already fundamentally wrong. > > Old boards only sold with the original SoC variant have no reason to > enable the OHCI (since it never worked originally), thus will never > execute this check. > > New boards designed around the W variant to make use of the OHCI can > freely enable it either way. > > The only relative-edge-case where it might matter is older board designs > still in production which have shipped with both SoC variants. Enabling > OHCI can't be *necessary* given that it's still broken on a lot of > deployed boards, so at best it must be an opportunistic nice-to-have. > Since we're already having to rely on the bootloader to patch up the > devicetree for other low-level differences in this case, it should be > part of that responsibility for it to only enable the OHCI on the > appropriate SoC variant too. Statically enabling it in the DTS for a > board where it may well not work is just bad. You mean enable OHCI by identifying revision W with dts status "okay"? doesn't it complex for the bootloader to update all effecting changes? Jagan. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] usb: host: ohci-platform: Disable ohci for rk3288 2020-07-03 11:39 ` Jagan Teki @ 2020-07-03 17:08 ` Robin Murphy 0 siblings, 0 replies; 5+ messages in thread From: Robin Murphy @ 2020-07-03 17:08 UTC (permalink / raw) To: Jagan Teki Cc: Alan Stern, Greg Kroah-Hartman, Heiko Stuebner, Rob Herring, Mylène Josserand, linux-usb, linux-kernel, open list:ARM/Rockchip SoC..., Suniel Mahesh, William Wu, Michael Trimarchi, linux-amarula, Kever Yang On 2020-07-03 12:39, Jagan Teki wrote: > On Thu, Jul 2, 2020 at 8:08 PM Robin Murphy <robin.murphy@arm.com> wrote: >> >> On 2020-07-02 10:05, Jagan Teki wrote: >>> rk3288 has usb host0 ohci controller but doesn't actually work >>> on real hardware but it works with new revision chip rk3288w. >>> >>> So, disable ohci for rk3288. >>> >>> For rk3288w chips the compatible update code is handled by bootloader. >>> >>> Cc: William Wu <william.wu@rock-chips.com> >>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> >>> --- >>> Note: >>> - U-Boot patch for compatible update >>> https://patchwork.ozlabs.org/project/uboot/patch/20200702084820.35942-1-jagan@amarulasolutions.com/ >>> >>> drivers/usb/host/ohci-platform.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c >>> index 7addfc2cbadc..24655ed6a7e0 100644 >>> --- a/drivers/usb/host/ohci-platform.c >>> +++ b/drivers/usb/host/ohci-platform.c >>> @@ -96,7 +96,7 @@ static int ohci_platform_probe(struct platform_device *dev) >>> struct ohci_hcd *ohci; >>> int err, irq, clk = 0; >>> >>> - if (usb_disabled()) >>> + if (usb_disabled() || of_machine_is_compatible("rockchip,rk3288")) >> >> This seems unnecessary to me - if we've even started probing a driver >> for a broken piece of hardware to the point that we need magic checks to >> bail out again, then something is already fundamentally wrong. >> >> Old boards only sold with the original SoC variant have no reason to >> enable the OHCI (since it never worked originally), thus will never >> execute this check. >> >> New boards designed around the W variant to make use of the OHCI can >> freely enable it either way. >> >> The only relative-edge-case where it might matter is older board designs >> still in production which have shipped with both SoC variants. Enabling >> OHCI can't be *necessary* given that it's still broken on a lot of >> deployed boards, so at best it must be an opportunistic nice-to-have. >> Since we're already having to rely on the bootloader to patch up the >> devicetree for other low-level differences in this case, it should be >> part of that responsibility for it to only enable the OHCI on the >> appropriate SoC variant too. Statically enabling it in the DTS for a >> board where it may well not work is just bad. > > You mean enable OHCI by identifying revision W with dts status "okay"? > doesn't it complex for the bootloader to update all effecting changes? Well, on boards which may have either SoC it's already got to detect the difference and make at least a couple of other DT adjustments; a handful more lines to check for a specific node and flip its status wouldn't be too horrendous (although I suppose you'd also want to check whether the EHCI is enabled first, to guess at whether the port's even wired up at all). Or alternatively, as I said, simply don't bother doing anything - boards that only use RK3288W can enable OHCI in their DTS, and other boards that have been not using it for however many years can continue not using it even if it might technically be available on newer production runs. Robin. ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-07-03 17:08 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-02 9:05 [PATCH] usb: host: ohci-platform: Disable ohci for rk3288 Jagan Teki 2020-07-02 13:26 ` Alan Stern 2020-07-02 14:38 ` Robin Murphy 2020-07-03 11:39 ` Jagan Teki 2020-07-03 17:08 ` Robin Murphy
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).