* [PATCH v2] ARM: dts: stm32: add Timers driver for stm32f746 MCU
@ 2017-10-06 7:14 Benjamin Gaignard
2017-10-06 13:04 ` Alexandre Torgue
0 siblings, 1 reply; 2+ messages in thread
From: Benjamin Gaignard @ 2017-10-06 7:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, linux, mcoquelin.stm32, alexandre.torgue
Cc: devicetree, linux-arm-kernel, linux-kernel, Benjamin Gaignard,
Benjamin Gaignard
Add Timers and it sub-nodes into DT for stm32f746 family.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
version 2:
- without ltdc node
arch/arm/boot/dts/stm32f746.dtsi | 260 +++++++++++++++++++++++++++++++++++++++
1 file changed, 260 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 4506eb9..d0deee2 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -82,6 +82,27 @@
status = "disabled";
};
+ timers2: timers@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
timer3: timer@40000400 {
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
@@ -90,6 +111,27 @@
status = "disabled";
};
+ timers3: timers@40000400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
timer4: timer@40000800 {
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
@@ -98,6 +140,27 @@
status = "disabled";
};
+ timers4: timers@40000800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
timer5: timer@40000c00 {
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
@@ -105,6 +168,27 @@
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
};
+ timers5: timers@40000c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000C00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
timer6: timer@40001000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
@@ -113,6 +197,22 @@
status = "disabled";
};
+ timers6: timers@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
timer7: timer@40001400 {
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
@@ -121,6 +221,73 @@
status = "disabled";
};
+ timers7: timers@40001400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timers@40001800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timers@40001c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001C00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers14: timers@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
rtc: rtc@40002800 {
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
@@ -183,6 +350,48 @@
status = "disabled";
};
+ timers1: timers@40010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timers@40010400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
usart1: serial@40011000 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011000 0x400>;
@@ -212,6 +421,57 @@
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
};
+ timers9: timers@40014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@8 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <8>;
+ status = "disabled";
+ };
+ };
+
+ timers10: timers@40014400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers11: timers@40014800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
pwrcfg: power-config@40007000 {
compatible = "syscon";
reg = <0x40007000 0x400>;
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: dts: stm32: add Timers driver for stm32f746 MCU
2017-10-06 7:14 [PATCH v2] ARM: dts: stm32: add Timers driver for stm32f746 MCU Benjamin Gaignard
@ 2017-10-06 13:04 ` Alexandre Torgue
0 siblings, 0 replies; 2+ messages in thread
From: Alexandre Torgue @ 2017-10-06 13:04 UTC (permalink / raw)
To: Benjamin Gaignard, robh+dt, mark.rutland, linux, mcoquelin.stm32
Cc: devicetree, linux-arm-kernel, linux-kernel, Benjamin Gaignard
Hi
On 10/06/2017 09:14 AM, Benjamin Gaignard wrote:
> Add Timers and it sub-nodes into DT for stm32f746 family.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
> version 2:
> - without ltdc node
>
Applied on stm32-dt-for-v4.15 branch.
Thanks
Alex
> arch/arm/boot/dts/stm32f746.dtsi | 260 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 260 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
> index 4506eb9..d0deee2 100644
> --- a/arch/arm/boot/dts/stm32f746.dtsi
> +++ b/arch/arm/boot/dts/stm32f746.dtsi
> @@ -82,6 +82,27 @@
> status = "disabled";
> };
>
> + timers2: timers@40000000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40000000 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> +
> + timer@1 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <1>;
> + status = "disabled";
> + };
> + };
> +
> timer3: timer@40000400 {
> compatible = "st,stm32-timer";
> reg = <0x40000400 0x400>;
> @@ -90,6 +111,27 @@
> status = "disabled";
> };
>
> + timers3: timers@40000400 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40000400 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> +
> + timer@2 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <2>;
> + status = "disabled";
> + };
> + };
> +
> timer4: timer@40000800 {
> compatible = "st,stm32-timer";
> reg = <0x40000800 0x400>;
> @@ -98,6 +140,27 @@
> status = "disabled";
> };
>
> + timers4: timers@40000800 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40000800 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> +
> + timer@3 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <3>;
> + status = "disabled";
> + };
> + };
> +
> timer5: timer@40000c00 {
> compatible = "st,stm32-timer";
> reg = <0x40000c00 0x400>;
> @@ -105,6 +168,27 @@
> clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
> };
>
> + timers5: timers@40000c00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40000C00 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> +
> + timer@4 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <4>;
> + status = "disabled";
> + };
> + };
> +
> timer6: timer@40001000 {
> compatible = "st,stm32-timer";
> reg = <0x40001000 0x400>;
> @@ -113,6 +197,22 @@
> status = "disabled";
> };
>
> + timers6: timers@40001000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40001000 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + timer@5 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <5>;
> + status = "disabled";
> + };
> + };
> +
> timer7: timer@40001400 {
> compatible = "st,stm32-timer";
> reg = <0x40001400 0x400>;
> @@ -121,6 +221,73 @@
> status = "disabled";
> };
>
> + timers7: timers@40001400 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40001400 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + timer@6 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <6>;
> + status = "disabled";
> + };
> + };
> +
> + timers12: timers@40001800 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40001800 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> +
> + timer@11 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <11>;
> + status = "disabled";
> + };
> + };
> +
> + timers13: timers@40001c00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40001C00 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> + };
> +
> + timers14: timers@40002000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40002000 0x400>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> + };
> +
> rtc: rtc@40002800 {
> compatible = "st,stm32-rtc";
> reg = <0x40002800 0x400>;
> @@ -183,6 +350,48 @@
> status = "disabled";
> };
>
> + timers1: timers@40010000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40010000 0x400>;
> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> +
> + timer@0 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <0>;
> + status = "disabled";
> + };
> + };
> +
> + timers8: timers@40010400 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40010400 0x400>;
> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> +
> + timer@7 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <7>;
> + status = "disabled";
> + };
> + };
> +
> usart1: serial@40011000 {
> compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> reg = <0x40011000 0x400>;
> @@ -212,6 +421,57 @@
> interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
> };
>
> + timers9: timers@40014000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40014000 0x400>;
> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> +
> + timer@8 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <8>;
> + status = "disabled";
> + };
> + };
> +
> + timers10: timers@40014400 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40014400 0x400>;
> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> + };
> +
> + timers11: timers@40014800 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40014800 0x400>;
> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
> + clock-names = "int";
> + status = "disabled";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + status = "disabled";
> + };
> + };
> +
> pwrcfg: power-config@40007000 {
> compatible = "syscon";
> reg = <0x40007000 0x400>;
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-06 13:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-06 7:14 [PATCH v2] ARM: dts: stm32: add Timers driver for stm32f746 MCU Benjamin Gaignard
2017-10-06 13:04 ` Alexandre Torgue
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).