[PATCH v7 00/11] Adds support for PHY LEDs with offload triggers

[PATCH v7 00/11] Adds support for PHY LEDs with offload triggers

[Christian Marangi]

This is another attempt on adding this feature on LEDs, hoping this is
the right time and someone finally notice this.


Most of the times Switch/PHY have connected multiple LEDs that are
controlled by HW based on some rules/event. Currently we lack any
support for a generic way to control the HW part and normally we
either never implement the feature or only add control for brightness
or hw blink.

This is based on Marek idea of providing some API to cled but use a
different implementation that in theory should be more generilized.

The current idea is:
- LED driver implement 3 API (hw_control_status/start/stop).
  They are used to put the LED in hardware mode and to configure the
  various trigger.
- We have hardware triggers that are used to expose to userspace the
  supported hardware mode and set the hardware mode on trigger
  activation.
- We can also have triggers that both support hardware and software mode.
- The LED driver will declare each supported hardware blink mode and
  communicate with the trigger all the supported blink modes that will
  be available by sysfs.
- A trigger will use blink_set to configure the blink mode to active
  in hardware mode.
- On hardware trigger activation, only the hardware mode is enabled but
  the blink modes are not configured. The LED driver should reset any
  link mode active by default.

Each LED driver will have to declare explicit support for the offload
trigger (or return not supported error code) as we the trigger_data that
the LED driver will elaborate and understand what is referring to (based
on the current active trigger).

I posted a user for this new implementation that will benefit from this
and will add a big feature to it. Currently qca8k can have up to 3 LEDs
connected to each PHY port and we have some device that have only one of
them connected and the default configuration won't work for that.

The netdev trigger is expanded and it does now support hardware only
triggers.
The idea is to use hardware mode when a device_name is not defined.
An additional sysfs entry is added to give some info about the available
trigger modes supported in the current configuration.


It was reported that at least 3 other switch family would benefits by
this as they all lack support for a generic way to setup their leds and
netdev team NACK each try to add special code to support LEDs present
on switch in favor of a generic solution.

v7:
- Rebase on top of net-next (for qca8k changes)
- Fix some typo in commit description
- Fix qca8k leds documentation warning
- Remove RFC tag
v6:
- Back to RFC.
- Drop additional trigger
- Rework netdev trigger to support common modes used by switch and
  hardware only triggers
- Refresh qca8k leds logic and driver
v5:
- Move out of RFC. (no comments from Andrew this is the right path?)
- Fix more spelling mistake (thx Randy)
- Fix error reported by kernel test bot
- Drop the additional HW_CONTROL flag. It does simplify CONFIG
  handling and hw control should be available anyway to support
  triggers as module.
v4:
- Rework implementation and drop hw_configure logic.
  We now expand blink_set.
- Address even more spelling mistake. (thx a lot Randy)
- Drop blink option and use blink_set delay.
- Rework phy-activity trigger to actually make the groups dynamic.
v3:
- Rework start/stop as Andrew asked.
- Introduce more logic to permit a trigger to run in hardware mode.
- Add additional patch with netdev hardware support.
- Use test_bit API to check flag passed to hw_control_configure.
- Added a new cmd to hw_control_configure to reset any active blink_mode.
- Refactor all the patches to follow this new implementation.
v2:
- Fix spelling mistake (sorry)
- Drop patch 02 "permit to declare supported offload triggers".
  Change the logic, now the LED driver declare support for them
  using the configure_offload with the cmd TRIGGER_SUPPORTED.
- Rework code to follow this new implementation.
- Update Documentation to better describe how this offload
  implementation work.

Christian Marangi (11):
  leds: add support for hardware driven LEDs
  leds: add function to configure hardware controlled LED
  leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode
  leds: trigger: netdev: rename and expose NETDEV trigger enum modes
  leds: trigger: netdev: convert device attr to macro
  leds: trigger: netdev: add hardware control support
  leds: trigger: netdev: use mutex instead of spinlocks
  leds: trigger: netdev: add available mode sysfs attr
  leds: trigger: netdev: add additional hardware only triggers
  net: dsa: qca8k: add LEDs support
  dt-bindings: net: dsa: qca8k: add LEDs definition example

 .../devicetree/bindings/net/dsa/qca8k.yaml    |  24 ++
 Documentation/leds/leds-class.rst             |  53 +++
 drivers/leds/Kconfig                          |  11 +
 drivers/leds/led-class.c                      |  27 ++
 drivers/leds/led-triggers.c                   |  29 ++
 drivers/leds/trigger/ledtrig-netdev.c         | 385 ++++++++++++-----
 drivers/net/dsa/qca/Kconfig                   |   9 +
 drivers/net/dsa/qca/Makefile                  |   1 +
 drivers/net/dsa/qca/qca8k-8xxx.c              |   4 +
 drivers/net/dsa/qca/qca8k-leds.c              | 406 ++++++++++++++++++
 drivers/net/dsa/qca/qca8k.h                   |  62 +++
 include/linux/leds.h                          | 103 ++++-
 12 files changed, 1015 insertions(+), 99 deletions(-)
 create mode 100644 drivers/net/dsa/qca/qca8k-leds.c

-- 
2.37.2

[PATCH v7 01/11] leds: add support for hardware driven LEDs

[Christian Marangi]

Some LEDs can be driven by hardware (for example a LED connected to
an ethernet PHY or an ethernet switch can be configured to blink on
activity on the network, which in software is done by the netdev trigger).

To do such offloading, LED driver must support this and a supported
trigger must be used.

LED driver should declare the correct blink_mode supported and should set
the blink_mode parameter to one of HARDWARE_CONTROLLED or
SOFTWARE_HARDWARE_CONTROLLED.
The trigger will check this option and fail to activate if the blink_mode
is not supported. By default if a LED driver doesn't declare blink_mode,
SOFTWARE_CONTROLLED is assumed.

The LED must implement 3 main API:
- hw_control_status(): This asks the LED driver if hardware mode is
    enabled or not.
    Triggers will check if the offload mode is supported and will be
    activated accordingly. If the trigger can't run in software mode,
    return -EOPNOTSUPP as the blinking can't be simulated by software.
- hw_control_start(): This will simply enable the hardware mode for
    the LED.
    With this not declared and hw_control_status() returning true,
    it's assumed that the LED is always in hardware mode.
- hw_control_stop(): This will simply disable the hardware mode for
    the LED.
    With this not declared and hw_control_status() returning true,
    it's assumed that the LED is always in hardware mode.
    It's advised to the driver to put the LED in the old state but this
    is not enforcerd and putting the LED off is also accepted.

With HARDWARE_CONTROLLED blink_mode hw_control_status/start/stop is
optional and any software only trigger will reject activation as the LED
supports only hardware mode.

An additional config CONFIG_LEDS_HARDWARE_CONTROL is added to add support
for LEDs that can be controlled by hardware.

Cc: Marek Behún <kabel@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 Documentation/leds/leds-class.rst | 28 ++++++++++++++++++
 drivers/leds/Kconfig              | 11 ++++++++
 drivers/leds/led-class.c          | 27 ++++++++++++++++++
 drivers/leds/led-triggers.c       | 29 +++++++++++++++++++
 include/linux/leds.h              | 47 ++++++++++++++++++++++++++++++-
 5 files changed, 141 insertions(+), 1 deletion(-)

diff --git a/Documentation/leds/leds-class.rst b/Documentation/leds/leds-class.rst
index cd155ead8703..645940b78d81 100644
--- a/Documentation/leds/leds-class.rst
+++ b/Documentation/leds/leds-class.rst
@@ -169,6 +169,34 @@ Setting the brightness to zero with brightness_set() callback function
 should completely turn off the LED and cancel the previously programmed
 hardware blinking function, if any.
 
+Hardware driven LEDs
+===================================
+
+Some LEDs can be driven by hardware (for example a LED connected to
+an ethernet PHY or an ethernet switch can be configured to blink on activity on
+the network, which in software is done by the netdev trigger).
+
+To do such offloading, LED driver must support this and a supported trigger must
+be used.
+
+LED driver should declare the correct blink_mode supported and should set the
+blink_mode parameter to one of HARDWARE_CONTROLLED or SOFTWARE_HARDWARE_CONTROLLED.
+The trigger will check this option and fail to activate if the blink_mode is not
+supported. By default if a LED driver doesn't declare blink_mode, SOFTWARE_CONTROLLED
+is assumed.
+
+The LED must implement 3 main API:
+- hw_control_status(): This asks the LED driver if hardware mode is enabled
+    or not. Triggers will check if the hardware mode is active and will try
+    to offload their triggers if supported by the driver.
+- hw_control_start(): This will simply enable the hardware mode for the LED.
+- hw_control_stop(): This will simply disable the hardware mode for the LED.
+    It's advised to the driver to put the LED in the old state but this is not
+    enforcerd and putting the LED off is also accepted.
+
+With HARDWARE_CONTROLLED blink_mode hw_control_status/start/stop is optional
+and any software only trigger will reject activation as the LED supports only
+hardware mode.
 
 Known Issues
 ============
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 499d0f215a8b..891f4821b2c8 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -49,6 +49,17 @@ config LEDS_BRIGHTNESS_HW_CHANGED
 
 	  See Documentation/ABI/testing/sysfs-class-led for details.
 
+config LEDS_HARDWARE_CONTROL
+	bool "LED Hardware Control support"
+	help
+	  This option enabled Hardware control support used by leds that
+	  can be driven in hardware by using supported triggers.
+
+	  Hardware blink modes will be exposed by sysfs class in
+	  /sys/class/leds based on the trigger currently active.
+
+	  If unsure, say Y.
+
 comment "LED drivers"
 
 config LEDS_88PM860X
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 6a8ea94834fa..3516ae3c4c3c 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -164,6 +164,27 @@ static void led_remove_brightness_hw_changed(struct led_classdev *led_cdev)
 }
 #endif
 
+#ifdef CONFIG_LEDS_HARDWARE_CONTROL
+static int led_classdev_check_blink_mode_functions(struct led_classdev *led_cdev)
+{
+	int mode = led_cdev->blink_mode;
+
+	if (mode == SOFTWARE_HARDWARE_CONTROLLED &&
+	    (!led_cdev->hw_control_status ||
+	    !led_cdev->hw_control_start ||
+	    !led_cdev->hw_control_stop))
+		return -EINVAL;
+
+	if (mode == SOFTWARE_CONTROLLED &&
+	    (led_cdev->hw_control_status ||
+	    led_cdev->hw_control_start ||
+	    led_cdev->hw_control_stop))
+		return -EINVAL;
+
+	return 0;
+}
+#endif
+
 /**
  * led_classdev_suspend - suspend an led_classdev.
  * @led_cdev: the led_classdev to suspend.
@@ -367,6 +388,12 @@ int led_classdev_register_ext(struct device *parent,
 	if (ret < 0)
 		return ret;
 
+#ifdef CONFIG_LEDS_HARDWARE_CONTROL
+	ret = led_classdev_check_blink_mode_functions(led_cdev);
+	if (ret < 0)
+		return ret;
+#endif
+
 	mutex_init(&led_cdev->led_access);
 	mutex_lock(&led_cdev->led_access);
 	led_cdev->dev = device_create_with_groups(leds_class, parent, 0,
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 072491d3e17b..693c5d0fa980 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -154,6 +154,27 @@ ssize_t led_trigger_read(struct file *filp, struct kobject *kobj,
 }
 EXPORT_SYMBOL_GPL(led_trigger_read);
 
+static bool led_trigger_is_supported(struct led_classdev *led_cdev,
+				     struct led_trigger *trigger)
+{
+	switch (led_cdev->blink_mode) {
+	case SOFTWARE_CONTROLLED:
+		if (trigger->supported_blink_modes == HARDWARE_ONLY)
+			return 0;
+		break;
+	case HARDWARE_CONTROLLED:
+		if (trigger->supported_blink_modes == SOFTWARE_ONLY)
+			return 0;
+		break;
+	case SOFTWARE_HARDWARE_CONTROLLED:
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
 /* Caller must ensure led_cdev->trigger_lock held */
 int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 {
@@ -179,6 +200,10 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 
 		cancel_work_sync(&led_cdev->set_brightness_work);
 		led_stop_software_blink(led_cdev);
+		/* Disable hardware mode on trigger change if supported */
+		if (led_cdev->blink_mode != SOFTWARE_CONTROLLED &&
+		    led_cdev->hw_control_status(led_cdev))
+			led_cdev->hw_control_stop(led_cdev);
 		if (led_cdev->trigger->deactivate)
 			led_cdev->trigger->deactivate(led_cdev);
 		device_remove_groups(led_cdev->dev, led_cdev->trigger->groups);
@@ -188,6 +213,10 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 		led_set_brightness(led_cdev, LED_OFF);
 	}
 	if (trig) {
+		/* Make sure the trigger support the LED blink mode */
+		if (!led_trigger_is_supported(led_cdev, trig))
+			return -EINVAL;
+
 		spin_lock(&trig->leddev_list_lock);
 		list_add_tail_rcu(&led_cdev->trig_list, &trig->led_cdevs);
 		spin_unlock(&trig->leddev_list_lock);
diff --git a/include/linux/leds.h b/include/linux/leds.h
index ba4861ec73d3..09ff1dc6f48d 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -67,6 +67,12 @@ struct led_hw_trigger_type {
 	int dummy;
 };
 
+enum led_blink_modes {
+	SOFTWARE_CONTROLLED = 0x0,
+	HARDWARE_CONTROLLED,
+	SOFTWARE_HARDWARE_CONTROLLED,
+};
+
 struct led_classdev {
 	const char		*name;
 	unsigned int brightness;
@@ -154,6 +160,32 @@ struct led_classdev {
 
 	/* LEDs that have private triggers have this set */
 	struct led_hw_trigger_type	*trigger_type;
+
+	/* This report the supported blink_mode. The driver should report the
+	 * correct LED capabilities.
+	 * With this set to HARDWARE_CONTROLLED, LED is always in offload mode
+	 * and triggers can't be simulated by software.
+	 * If the led is HARDWARE_CONTROLLED, status/start/stop function
+	 * are optional.
+	 * By default SOFTWARE_CONTROLLED is set as blink_mode.
+	 */
+	enum led_blink_modes	blink_mode;
+#ifdef CONFIG_LEDS_HARDWARE_CONTROL
+	/* Ask the LED driver if hardware mode is enabled or not.
+	 * If the option is not declared by the LED driver, SOFTWARE_CONTROLLED
+	 * is assumed.
+	 * Triggers will check if the hardware mode is supported and will be
+	 * activated accordingly. If the trigger can't run in hardware mode,
+	 * return -EOPNOTSUPP as the blinking can't be simulated by software.
+	 */
+	bool			(*hw_control_status)(struct led_classdev *led_cdev);
+	/* Set LED in hardware mode */
+	int			(*hw_control_start)(struct led_classdev *led_cdev);
+	/* Disable hardware mode for LED. It's advised to the LED driver to put it to
+	 * the old status but that is not mandatory and also putting it off is accepted.
+	 */
+	int			(*hw_control_stop)(struct led_classdev *led_cdev);
+#endif
 #endif
 
 #ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED
@@ -215,7 +247,6 @@ extern struct led_classdev *of_led_get(struct device_node *np, int index);
 extern void led_put(struct led_classdev *led_cdev);
 struct led_classdev *__must_check devm_of_led_get(struct device *dev,
 						  int index);
-
 /**
  * led_blink_set - set blinking with software fallback
  * @led_cdev: the LED to start blinking
@@ -350,12 +381,26 @@ static inline bool led_sysfs_is_disabled(struct led_classdev *led_cdev)
 
 #define TRIG_NAME_MAX 50
 
+enum led_trigger_blink_supported_modes {
+	SOFTWARE_ONLY = SOFTWARE_CONTROLLED,
+	HARDWARE_ONLY = HARDWARE_CONTROLLED,
+	SOFTWARE_HARDWARE = SOFTWARE_HARDWARE_CONTROLLED,
+};
+
 struct led_trigger {
 	/* Trigger Properties */
 	const char	 *name;
 	int		(*activate)(struct led_classdev *led_cdev);
 	void		(*deactivate)(struct led_classdev *led_cdev);
 
+	/* Declare if the Trigger supports hardware control to
+	 * offload triggers or supports only software control.
+	 * A trigger can also declare support for hardware control
+	 * if its task is to only configure LED blink modes and expose
+	 * them in sysfs.
+	 */
+	enum led_trigger_blink_supported_modes supported_blink_modes;
+
 	/* LED-private triggers have this set */
 	struct led_hw_trigger_type *trigger_type;
 
-- 
2.37.2

[PATCH v7 02/11] leds: add function to configure hardware controlled LED

[Christian Marangi]

Add hw_control_configure helper to configure how the LED should work in
hardware mode. The function require to support the particular trigger and
will use the passed flag to elaborate the data and apply the
correct configuration. This function will then be used by the trigger to
request and update hardware configuration.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 Documentation/leds/leds-class.rst | 25 ++++++++++++++++++++
 include/linux/leds.h              | 39 +++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)

diff --git a/Documentation/leds/leds-class.rst b/Documentation/leds/leds-class.rst
index 645940b78d81..efd2f68c46a7 100644
--- a/Documentation/leds/leds-class.rst
+++ b/Documentation/leds/leds-class.rst
@@ -198,6 +198,31 @@ With HARDWARE_CONTROLLED blink_mode hw_control_status/start/stop is optional
 and any software only trigger will reject activation as the LED supports only
 hardware mode.
 
+A trigger once he declared support for hardware controlled blinks, will use the function
+hw_control_configure() provided by the driver to check support for a particular blink mode.
+This function passes as the first argument (flag) a u32 flag.
+The second argument (cmd) of hw_control_configure() method can be used to do various
+operations for the specific blink mode. We currently support ENABLE, DISABLE, READ, ZERO
+and SUPPORTED to enable, disable, read the state of the blink mode, ask the LED
+driver if it does supports the specific blink mode and to reset any blink mode active.
+
+In ENABLE/DISABLE hw_control_configure() should configure the LED to enable/disable the
+requested blink mode (flag).
+In READ hw_control_configure() should return 0 or 1 based on the status of the requested
+blink mode (flag).
+In SUPPORTED hw_control_configure() should return 0 or 1 if the LED driver supports the
+requested blink mode (flags) or not.
+In ZERO hw_control_configure() should return 0 with success operation or error.
+
+The unsigned long flag is specific to the trigger and change across them. It's in the LED
+driver interest know how to elaborate this flag and to declare support for a
+particular trigger. For this exact reason explicit support for the specific
+trigger is mandatory or the driver returns -EOPNOTSUPP if asked to enter offload mode
+with a not supported trigger.
+If the driver returns -EOPNOTSUPP on hw_control_configure(), the trigger activation will
+fail as the driver doesn't support that specific offload trigger or doesn't know
+how to handle the provided flags.
+
 Known Issues
 ============
 
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 09ff1dc6f48d..b5aad67fecfb 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -73,6 +73,16 @@ enum led_blink_modes {
 	SOFTWARE_HARDWARE_CONTROLLED,
 };
 
+#ifdef CONFIG_LEDS_HARDWARE_CONTROL
+enum blink_mode_cmd {
+	BLINK_MODE_ENABLE, /* Enable the hardware blink mode */
+	BLINK_MODE_DISABLE, /* Disable the hardware blink mode */
+	BLINK_MODE_READ, /* Read the status of the hardware blink mode */
+	BLINK_MODE_SUPPORTED, /* Ask the driver if the hardware blink mode is supported */
+	BLINK_MODE_ZERO, /* Disable any hardware blink active */
+};
+#endif
+
 struct led_classdev {
 	const char		*name;
 	unsigned int brightness;
@@ -185,6 +195,17 @@ struct led_classdev {
 	 * the old status but that is not mandatory and also putting it off is accepted.
 	 */
 	int			(*hw_control_stop)(struct led_classdev *led_cdev);
+	/* This will be used to configure the various blink modes LED support in hardware
+	 * mode.
+	 * The LED driver require to support the active trigger and will elaborate the
+	 * unsigned long flag and do the operation based on the provided cmd.
+	 * Current operation are enable,disable,supported and status.
+	 * A trigger will use this to enable or disable the asked blink mode, check the
+	 * status of the blink mode or ask if the blink mode can run in hardware mode.
+	 */
+	int			(*hw_control_configure)(struct led_classdev *led_cdev,
+							unsigned long flag,
+							enum blink_mode_cmd cmd);
 #endif
 #endif
 
@@ -454,6 +475,24 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
 	return led_cdev->trigger_data;
 }
 
+#ifdef CONFIG_LEDS_HARDWARE_CONTROL
+static inline bool led_trigger_blink_mode_is_supported(struct led_classdev *led_cdev,
+						       unsigned long flag)
+{
+	int ret;
+
+	/* Sanity check: make sure led support hw mode */
+	if (led_cdev->blink_mode == SOFTWARE_CONTROLLED)
+		return false;
+
+	ret = led_cdev->hw_control_configure(led_cdev, flag, BLINK_MODE_SUPPORTED);
+	if (ret > 0)
+		return true;
+
+	return false;
+}
+#endif
+
 /**
  * led_trigger_rename_static - rename a trigger
  * @name: the new trigger name
-- 
2.37.2

[PATCH v7 03/11] leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode

[Christian Marangi]

Drop NETDEV_LED_MODE_LINKUP from mode list and convert to a simple bool
that will be true or false based on the carrier link. No functional
change intended.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index d5e774d83021..66a81cc9b64d 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -50,10 +50,10 @@ struct led_netdev_data {
 	unsigned int last_activity;
 
 	unsigned long mode;
+	bool carrier_link_up;
 #define NETDEV_LED_LINK	0
 #define NETDEV_LED_TX	1
 #define NETDEV_LED_RX	2
-#define NETDEV_LED_MODE_LINKUP	3
 };
 
 enum netdev_led_attr {
@@ -73,9 +73,9 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
 	if (!led_cdev->blink_brightness)
 		led_cdev->blink_brightness = led_cdev->max_brightness;
 
-	if (!test_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode))
+	if (!trigger_data->carrier_link_up) {
 		led_set_brightness(led_cdev, LED_OFF);
-	else {
+	} else {
 		if (test_bit(NETDEV_LED_LINK, &trigger_data->mode))
 			led_set_brightness(led_cdev,
 					   led_cdev->blink_brightness);
@@ -131,10 +131,9 @@ static ssize_t device_name_store(struct device *dev,
 		trigger_data->net_dev =
 		    dev_get_by_name(&init_net, trigger_data->device_name);
 
-	clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
+	trigger_data->carrier_link_up = false;
 	if (trigger_data->net_dev != NULL)
-		if (netif_carrier_ok(trigger_data->net_dev))
-			set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
+		trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
 
 	trigger_data->last_activity = 0;
 
@@ -315,7 +314,7 @@ static int netdev_trig_notify(struct notifier_block *nb,
 
 	spin_lock_bh(&trigger_data->lock);
 
-	clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
+	trigger_data->carrier_link_up = false;
 	switch (evt) {
 	case NETDEV_CHANGENAME:
 	case NETDEV_REGISTER:
@@ -330,8 +329,7 @@ static int netdev_trig_notify(struct notifier_block *nb,
 		break;
 	case NETDEV_UP:
 	case NETDEV_CHANGE:
-		if (netif_carrier_ok(dev))
-			set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
+		trigger_data->carrier_link_up = netif_carrier_ok(dev);
 		break;
 	}
 
-- 
2.37.2

[PATCH v7 04/11] leds: trigger: netdev: rename and expose NETDEV trigger enum modes

[Christian Marangi]

Rename NETDEV trigger enum modes to a more simbolic name and move them
in leds.h to make them accessible by any user.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 53 +++++++++------------------
 include/linux/leds.h                  |  7 ++++
 2 files changed, 25 insertions(+), 35 deletions(-)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 66a81cc9b64d..6872da08676b 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -51,15 +51,6 @@ struct led_netdev_data {
 
 	unsigned long mode;
 	bool carrier_link_up;
-#define NETDEV_LED_LINK	0
-#define NETDEV_LED_TX	1
-#define NETDEV_LED_RX	2
-};
-
-enum netdev_led_attr {
-	NETDEV_ATTR_LINK,
-	NETDEV_ATTR_TX,
-	NETDEV_ATTR_RX
 };
 
 static void set_baseline_state(struct led_netdev_data *trigger_data)
@@ -76,7 +67,7 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
 	if (!trigger_data->carrier_link_up) {
 		led_set_brightness(led_cdev, LED_OFF);
 	} else {
-		if (test_bit(NETDEV_LED_LINK, &trigger_data->mode))
+		if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
 			led_set_brightness(led_cdev,
 					   led_cdev->blink_brightness);
 		else
@@ -85,8 +76,8 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
 		/* If we are looking for RX/TX start periodically
 		 * checking stats
 		 */
-		if (test_bit(NETDEV_LED_TX, &trigger_data->mode) ||
-		    test_bit(NETDEV_LED_RX, &trigger_data->mode))
+		if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ||
+		    test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
 			schedule_delayed_work(&trigger_data->work, 0);
 	}
 }
@@ -146,20 +137,16 @@ static ssize_t device_name_store(struct device *dev,
 static DEVICE_ATTR_RW(device_name);
 
 static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
-	enum netdev_led_attr attr)
+				    enum led_trigger_netdev_modes attr)
 {
 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
 	int bit;
 
 	switch (attr) {
-	case NETDEV_ATTR_LINK:
-		bit = NETDEV_LED_LINK;
-		break;
-	case NETDEV_ATTR_TX:
-		bit = NETDEV_LED_TX;
-		break;
-	case NETDEV_ATTR_RX:
-		bit = NETDEV_LED_RX;
+	case TRIGGER_NETDEV_LINK:
+	case TRIGGER_NETDEV_TX:
+	case TRIGGER_NETDEV_RX:
+		bit = attr;
 		break;
 	default:
 		return -EINVAL;
@@ -169,7 +156,7 @@ static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
 }
 
 static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
-	size_t size, enum netdev_led_attr attr)
+				     size_t size, enum led_trigger_netdev_modes attr)
 {
 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
 	unsigned long state;
@@ -181,14 +168,10 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 		return ret;
 
 	switch (attr) {
-	case NETDEV_ATTR_LINK:
-		bit = NETDEV_LED_LINK;
-		break;
-	case NETDEV_ATTR_TX:
-		bit = NETDEV_LED_TX;
-		break;
-	case NETDEV_ATTR_RX:
-		bit = NETDEV_LED_RX;
+	case TRIGGER_NETDEV_LINK:
+	case TRIGGER_NETDEV_TX:
+	case TRIGGER_NETDEV_RX:
+		bit = attr;
 		break;
 	default:
 		return -EINVAL;
@@ -358,21 +341,21 @@ static void netdev_trig_work(struct work_struct *work)
 	}
 
 	/* If we are not looking for RX/TX then return  */
-	if (!test_bit(NETDEV_LED_TX, &trigger_data->mode) &&
-	    !test_bit(NETDEV_LED_RX, &trigger_data->mode))
+	if (!test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) &&
+	    !test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
 		return;
 
 	dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
 	new_activity =
-	    (test_bit(NETDEV_LED_TX, &trigger_data->mode) ?
+	    (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ?
 		dev_stats->tx_packets : 0) +
-	    (test_bit(NETDEV_LED_RX, &trigger_data->mode) ?
+	    (test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ?
 		dev_stats->rx_packets : 0);
 
 	if (trigger_data->last_activity != new_activity) {
 		led_stop_software_blink(trigger_data->led_cdev);
 
-		invert = test_bit(NETDEV_LED_LINK, &trigger_data->mode);
+		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode);
 		interval = jiffies_to_msecs(
 				atomic_read(&trigger_data->interval));
 		/* base state is ON (link present) */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index b5aad67fecfb..13862f8b1e07 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -548,6 +548,13 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
 
 #endif /* CONFIG_LEDS_TRIGGERS */
 
+/* Trigger specific enum */
+enum led_trigger_netdev_modes {
+	TRIGGER_NETDEV_LINK = 1,
+	TRIGGER_NETDEV_TX,
+	TRIGGER_NETDEV_RX,
+};
+
 /* Trigger specific functions */
 #ifdef CONFIG_LEDS_TRIGGER_DISK
 void ledtrig_disk_activity(bool write);
-- 
2.37.2

[PATCH v7 05/11] leds: trigger: netdev: convert device attr to macro

[Christian Marangi]

Convert link tx and rx device attr to a common macro to reduce common
code and in preparation for additional attr.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 57 ++++++++-------------------
 1 file changed, 16 insertions(+), 41 deletions(-)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 6872da08676b..dd63cadb896e 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -189,47 +189,22 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	return size;
 }
 
-static ssize_t link_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_LINK);
-}
-
-static ssize_t link_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t size)
-{
-	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_LINK);
-}
-
-static DEVICE_ATTR_RW(link);
-
-static ssize_t tx_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_TX);
-}
-
-static ssize_t tx_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t size)
-{
-	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_TX);
-}
-
-static DEVICE_ATTR_RW(tx);
-
-static ssize_t rx_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_RX);
-}
-
-static ssize_t rx_store(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t size)
-{
-	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_RX);
-}
-
-static DEVICE_ATTR_RW(rx);
+#define DEFINE_NETDEV_TRIGGER(trigger_name, trigger) \
+	static ssize_t trigger_name##_show(struct device *dev, \
+		struct device_attribute *attr, char *buf) \
+	{ \
+		return netdev_led_attr_show(dev, buf, trigger); \
+	} \
+	static ssize_t trigger_name##_store(struct device *dev, \
+		struct device_attribute *attr, const char *buf, size_t size) \
+	{ \
+		return netdev_led_attr_store(dev, buf, size, trigger); \
+	} \
+	static DEVICE_ATTR_RW(trigger_name)
+
+DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
+DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
+DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
 
 static ssize_t interval_show(struct device *dev,
 			     struct device_attribute *attr, char *buf)
-- 
2.37.2

[PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Christian Marangi]

Add hardware control support for the Netdev trigger.
The trigger on config change will check if the requested trigger can set
to blink mode using LED hardware mode and if every blink mode is supported,
the trigger will enable hardware mode with the requested configuration.
If there is at least one trigger that is not supported and can't run in
hardware mode, then software mode will be used instead.
A validation is done on every value change and on fail the old value is
restored and -EINVAL is returned.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 155 +++++++++++++++++++++++++-
 1 file changed, 149 insertions(+), 6 deletions(-)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index dd63cadb896e..ed019cb5867c 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -37,6 +37,7 @@
  */
 
 struct led_netdev_data {
+	enum led_blink_modes blink_mode;
 	spinlock_t lock;
 
 	struct delayed_work work;
@@ -53,11 +54,105 @@ struct led_netdev_data {
 	bool carrier_link_up;
 };
 
+struct netdev_led_attr_detail {
+	char *name;
+	bool hardware_only;
+	enum led_trigger_netdev_modes bit;
+};
+
+static struct netdev_led_attr_detail attr_details[] = {
+	{ .name = "link", .bit = TRIGGER_NETDEV_LINK},
+	{ .name = "tx", .bit = TRIGGER_NETDEV_TX},
+	{ .name = "rx", .bit = TRIGGER_NETDEV_RX},
+};
+
+static bool validate_baseline_state(struct led_netdev_data *trigger_data)
+{
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
+	struct netdev_led_attr_detail *detail;
+	u32 hw_blink_mode_supported = 0;
+	bool force_sw = false;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
+		detail = &attr_details[i];
+
+		/* Mode not active, skip */
+		if (!test_bit(detail->bit, &trigger_data->mode))
+			continue;
+
+		/* Hardware only mode enabled on software controlled led */
+		if (led_cdev->blink_mode == SOFTWARE_CONTROLLED &&
+		    detail->hardware_only)
+			return false;
+
+		/* Check if the mode supports hardware mode */
+		if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
+			/* With a net dev set, force software mode.
+			 * With modes are handled by hardware, led will blink
+			 * based on his own events and will ignore any event
+			 * from the provided dev.
+			 */
+			if (trigger_data->net_dev) {
+				force_sw = true;
+				continue;
+			}
+
+			/* With empty dev, check if the mode is supported */
+			if (led_trigger_blink_mode_is_supported(led_cdev, detail->bit))
+				hw_blink_mode_supported |= BIT(detail->bit);
+		}
+	}
+
+	/* We can't run modes handled by both software and hardware.
+	 * Check if we run hardware modes and check if all the modes
+	 * can be handled by hardware.
+	 */
+	if (hw_blink_mode_supported && hw_blink_mode_supported != trigger_data->mode)
+		return false;
+
+	/* Modes are valid. Decide now the running mode to later
+	 * set the baseline.
+	 * Software mode is enforced with net_dev set. With an empty
+	 * one hardware mode is selected by default (if supported).
+	 */
+	if (force_sw || led_cdev->blink_mode == SOFTWARE_CONTROLLED)
+		trigger_data->blink_mode = SOFTWARE_CONTROLLED;
+	else
+		trigger_data->blink_mode = HARDWARE_CONTROLLED;
+
+	return true;
+}
+
 static void set_baseline_state(struct led_netdev_data *trigger_data)
 {
+	int i;
 	int current_brightness;
+	struct netdev_led_attr_detail *detail;
 	struct led_classdev *led_cdev = trigger_data->led_cdev;
 
+	/* Modes already validated. Directly apply hw trigger modes */
+	if (trigger_data->blink_mode == HARDWARE_CONTROLLED) {
+		/* We are refreshing the blink modes. Reset them */
+		led_cdev->hw_control_configure(led_cdev, BIT(TRIGGER_NETDEV_LINK),
+					       BLINK_MODE_ZERO);
+
+		for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
+			detail = &attr_details[i];
+
+			if (!test_bit(detail->bit, &trigger_data->mode))
+				continue;
+
+			led_cdev->hw_control_configure(led_cdev, BIT(detail->bit),
+						       BLINK_MODE_ENABLE);
+		}
+
+		led_cdev->hw_control_start(led_cdev);
+
+		return;
+	}
+
+	/* Handle trigger modes by software */
 	current_brightness = led_cdev->brightness;
 	if (current_brightness)
 		led_cdev->blink_brightness = current_brightness;
@@ -100,10 +195,15 @@ static ssize_t device_name_store(struct device *dev,
 				 size_t size)
 {
 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	struct net_device *old_net = trigger_data->net_dev;
+	char old_device_name[IFNAMSIZ];
 
 	if (size >= IFNAMSIZ)
 		return -EINVAL;
 
+	/* Backup old device name */
+	memcpy(old_device_name, trigger_data->device_name, IFNAMSIZ);
+
 	cancel_delayed_work_sync(&trigger_data->work);
 
 	spin_lock_bh(&trigger_data->lock);
@@ -122,6 +222,19 @@ static ssize_t device_name_store(struct device *dev,
 		trigger_data->net_dev =
 		    dev_get_by_name(&init_net, trigger_data->device_name);
 
+	if (!validate_baseline_state(trigger_data)) {
+		/* Restore old net_dev and device_name */
+		if (trigger_data->net_dev)
+			dev_put(trigger_data->net_dev);
+
+		dev_hold(old_net);
+		trigger_data->net_dev = old_net;
+		memcpy(trigger_data->device_name, old_device_name, IFNAMSIZ);
+
+		spin_unlock_bh(&trigger_data->lock);
+		return -EINVAL;
+	}
+
 	trigger_data->carrier_link_up = false;
 	if (trigger_data->net_dev != NULL)
 		trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
@@ -159,7 +272,7 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 				     size_t size, enum led_trigger_netdev_modes attr)
 {
 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
-	unsigned long state;
+	unsigned long state, old_mode = trigger_data->mode;
 	int ret;
 	int bit;
 
@@ -184,6 +297,12 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	else
 		clear_bit(bit, &trigger_data->mode);
 
+	if (!validate_baseline_state(trigger_data)) {
+		/* Restore old mode on validation fail */
+		trigger_data->mode = old_mode;
+		return -EINVAL;
+	}
+
 	set_baseline_state(trigger_data);
 
 	return size;
@@ -220,6 +339,8 @@ static ssize_t interval_store(struct device *dev,
 			      size_t size)
 {
 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	int old_interval = atomic_read(&trigger_data->interval);
+	u32 old_mode = trigger_data->mode;
 	unsigned long value;
 	int ret;
 
@@ -228,13 +349,22 @@ static ssize_t interval_store(struct device *dev,
 		return ret;
 
 	/* impose some basic bounds on the timer interval */
-	if (value >= 5 && value <= 10000) {
-		cancel_delayed_work_sync(&trigger_data->work);
+	if (value < 5 || value > 10000)
+		return -EINVAL;
+
+	cancel_delayed_work_sync(&trigger_data->work);
+
+	atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
 
-		atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
-		set_baseline_state(trigger_data);	/* resets timer */
+	if (!validate_baseline_state(trigger_data)) {
+		/* Restore old interval on validation error */
+		atomic_set(&trigger_data->interval, old_interval);
+		trigger_data->mode = old_mode;
+		return -EINVAL;
 	}
 
+	set_baseline_state(trigger_data);	/* resets timer */
+
 	return size;
 }
 
@@ -368,13 +498,25 @@ static int netdev_trig_activate(struct led_classdev *led_cdev)
 	trigger_data->mode = 0;
 	atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
 	trigger_data->last_activity = 0;
+	if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
+		/* With hw mode enabled reset any rule set by default */
+		if (led_cdev->hw_control_status(led_cdev)) {
+			rc = led_cdev->hw_control_configure(led_cdev, BIT(TRIGGER_NETDEV_LINK),
+							    BLINK_MODE_ZERO);
+			if (rc)
+				goto err;
+		}
+	}
 
 	led_set_trigger_data(led_cdev, trigger_data);
 
 	rc = register_netdevice_notifier(&trigger_data->notifier);
 	if (rc)
-		kfree(trigger_data);
+		goto err;
 
+	return 0;
+err:
+	kfree(trigger_data);
 	return rc;
 }
 
@@ -394,6 +536,7 @@ static void netdev_trig_deactivate(struct led_classdev *led_cdev)
 
 static struct led_trigger netdev_led_trigger = {
 	.name = "netdev",
+	.supported_blink_modes = SOFTWARE_HARDWARE,
 	.activate = netdev_trig_activate,
 	.deactivate = netdev_trig_deactivate,
 	.groups = netdev_trig_groups,
-- 
2.37.2

[PATCH v7 07/11] leds: trigger: netdev: use mutex instead of spinlocks

[Christian Marangi]

Some LEDs may require to sleep to apply their hardware rules. Convert to
mutex lock to fix warning for sleeping under spinlock softirq.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index ed019cb5867c..a471e0cde836 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -20,7 +20,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/timer.h>
 #include "../leds.h"
 
@@ -38,7 +38,7 @@
 
 struct led_netdev_data {
 	enum led_blink_modes blink_mode;
-	spinlock_t lock;
+	struct mutex lock;
 
 	struct delayed_work work;
 	struct notifier_block notifier;
@@ -183,9 +183,9 @@ static ssize_t device_name_show(struct device *dev,
 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
 	ssize_t len;
 
-	spin_lock_bh(&trigger_data->lock);
+	mutex_lock(&trigger_data->lock);
 	len = sprintf(buf, "%s\n", trigger_data->device_name);
-	spin_unlock_bh(&trigger_data->lock);
+	mutex_unlock(&trigger_data->lock);
 
 	return len;
 }
@@ -206,7 +206,7 @@ static ssize_t device_name_store(struct device *dev,
 
 	cancel_delayed_work_sync(&trigger_data->work);
 
-	spin_lock_bh(&trigger_data->lock);
+	mutex_lock(&trigger_data->lock);
 
 	if (trigger_data->net_dev) {
 		dev_put(trigger_data->net_dev);
@@ -231,7 +231,7 @@ static ssize_t device_name_store(struct device *dev,
 		trigger_data->net_dev = old_net;
 		memcpy(trigger_data->device_name, old_device_name, IFNAMSIZ);
 
-		spin_unlock_bh(&trigger_data->lock);
+		mutex_unlock(&trigger_data->lock);
 		return -EINVAL;
 	}
 
@@ -242,7 +242,7 @@ static ssize_t device_name_store(struct device *dev,
 	trigger_data->last_activity = 0;
 
 	set_baseline_state(trigger_data);
-	spin_unlock_bh(&trigger_data->lock);
+	mutex_unlock(&trigger_data->lock);
 
 	return size;
 }
@@ -400,7 +400,7 @@ static int netdev_trig_notify(struct notifier_block *nb,
 
 	cancel_delayed_work_sync(&trigger_data->work);
 
-	spin_lock_bh(&trigger_data->lock);
+	mutex_lock(&trigger_data->lock);
 
 	trigger_data->carrier_link_up = false;
 	switch (evt) {
@@ -423,7 +423,7 @@ static int netdev_trig_notify(struct notifier_block *nb,
 
 	set_baseline_state(trigger_data);
 
-	spin_unlock_bh(&trigger_data->lock);
+	mutex_unlock(&trigger_data->lock);
 
 	return NOTIFY_DONE;
 }
@@ -484,7 +484,7 @@ static int netdev_trig_activate(struct led_classdev *led_cdev)
 	if (!trigger_data)
 		return -ENOMEM;
 
-	spin_lock_init(&trigger_data->lock);
+	mutex_init(&trigger_data->lock);
 
 	trigger_data->notifier.notifier_call = netdev_trig_notify;
 	trigger_data->notifier.priority = 10;
-- 
2.37.2

[PATCH v7 08/11] leds: trigger: netdev: add available mode sysfs attr

[Christian Marangi]

Add avaiable_mode sysfs attr to show and give some details about the
supported modes and how they can be handled by the trigger.
This is in preparation for hardware only modes that doesn't support
software fallback.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 32 +++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index a471e0cde836..3a3b77bb41fb 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -33,6 +33,8 @@
  *         (has carrier) or not
  * tx -  LED blinks on transmitted data
  * rx -  LED blinks on receive data
+ * available_mode - Display available mode and how they can be handled
+ *                  by the LED
  *
  */
 
@@ -370,12 +372,42 @@ static ssize_t interval_store(struct device *dev,
 
 static DEVICE_ATTR_RW(interval);
 
+static ssize_t available_mode_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	struct netdev_led_attr_detail *detail;
+	int i, len = 0;
+
+	for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
+		detail = &attr_details[i];
+
+		if (led_trigger_blink_mode_is_supported(trigger_data->led_cdev, detail->bit)) {
+			if (!trigger_data->net_dev) {
+				if (detail->hardware_only)
+					len += sprintf(buf + len, "%s [hardware]\n",
+						       detail->name);
+				else
+					len += sprintf(buf + len, "%s [software-hardware]\n",
+						       detail->name);
+			}
+		} else {
+			len += sprintf(buf + len, "%s [software]\n", detail->name);
+		}
+	}
+
+	return len;
+}
+
+static DEVICE_ATTR_RO(available_mode);
+
 static struct attribute *netdev_trig_attrs[] = {
 	&dev_attr_device_name.attr,
 	&dev_attr_link.attr,
 	&dev_attr_rx.attr,
 	&dev_attr_tx.attr,
 	&dev_attr_interval.attr,
+	&dev_attr_available_mode.attr,
 	NULL
 };
 ATTRIBUTE_GROUPS(netdev_trig);
-- 
2.37.2

[PATCH v7 09/11] leds: trigger: netdev: add additional hardware only triggers

[Christian Marangi]

Add additional hardware only triggers commonly supported by switch LEDs.

Additional modes:
link_10: LED on with link up AND speed 10mbps
link_100: LED on with link up AND speed 100mbps
link_1000: LED on with link up AND speed 1000mbps
half_duplex: LED on with link up AND half_duplex mode
full_duplex: LED on with link up AND full duplex mode

Additional blink interval modes:
blink_2hz: LED blink on any even at 2Hz (250ms)
blink_4hz: LED blink on any even at 4Hz (125ms)
blink_8hz: LED blink on any even at 8Hz (62ms)

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 58 +++++++++++++++++++++++++++
 include/linux/leds.h                  | 10 +++++
 2 files changed, 68 insertions(+)

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 3a3b77bb41fb..880d5e65f7a2 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -29,8 +29,20 @@
  *
  * device_name - network device name to monitor
  * interval - duration of LED blink, in milliseconds
+ *            (in hardware mode 2hz (62ms), 4hz (125ms) or 8hz (250ms)
+ *             are supported)
  * link -  LED's normal state reflects whether the link is up
  *         (has carrier) or not
+ * link_10 - LED's normal state reflects whether the link is
+ *           up and at 10mbps speed (hardware only)
+ * link_100 - LED's normal state reflects whether the link is
+ *            up and at 100mbps speed (hardware only)
+ * link_1000 - LED's normal state reflects whether the link is
+ *             up and at 1000mbps speed (hardware only)
+ * half_duplex - LED's normal state reflects whether the link is
+ *               up and hafl duplex (hardware only)
+ * full_duplex - LED's normal state reflects whether the link is
+ *               up and full duplex (hardware only)
  * tx -  LED blinks on transmitted data
  * rx -  LED blinks on receive data
  * available_mode - Display available mode and how they can be handled
@@ -64,8 +76,19 @@ struct netdev_led_attr_detail {
 
 static struct netdev_led_attr_detail attr_details[] = {
 	{ .name = "link", .bit = TRIGGER_NETDEV_LINK},
+	{ .name = "link_10", .hardware_only = true, .bit = TRIGGER_NETDEV_LINK_10},
+	{ .name = "link_100", .hardware_only = true, .bit = TRIGGER_NETDEV_LINK_100},
+	{ .name = "link_1000", .hardware_only = true, .bit = TRIGGER_NETDEV_LINK_1000},
+	{ .name = "half_duplex", .hardware_only = true, .bit = TRIGGER_NETDEV_HALF_DUPLEX},
+	{ .name = "full_duplex", .hardware_only = true, .bit = TRIGGER_NETDEV_FULL_DUPLEX},
 	{ .name = "tx", .bit = TRIGGER_NETDEV_TX},
 	{ .name = "rx", .bit = TRIGGER_NETDEV_RX},
+	{ .name = "hw blink 2hz (interval set to 62)", .hardware_only = true,
+	  .bit = TRIGGER_NETDEV_BLINK_2HZ},
+	{ .name = "hw blink 4hz (interval set to 125)", .hardware_only = true,
+	  .bit = TRIGGER_NETDEV_BLINK_4HZ},
+	{ .name = "hw blink 8hz (interval set to 250)", .hardware_only = true,
+	  .bit = TRIGGER_NETDEV_BLINK_8HZ},
 };
 
 static bool validate_baseline_state(struct led_netdev_data *trigger_data)
@@ -259,6 +282,11 @@ static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
 
 	switch (attr) {
 	case TRIGGER_NETDEV_LINK:
+	case TRIGGER_NETDEV_LINK_10:
+	case TRIGGER_NETDEV_LINK_100:
+	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_HALF_DUPLEX:
+	case TRIGGER_NETDEV_FULL_DUPLEX:
 	case TRIGGER_NETDEV_TX:
 	case TRIGGER_NETDEV_RX:
 		bit = attr;
@@ -284,6 +312,11 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 
 	switch (attr) {
 	case TRIGGER_NETDEV_LINK:
+	case TRIGGER_NETDEV_LINK_10:
+	case TRIGGER_NETDEV_LINK_100:
+	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_HALF_DUPLEX:
+	case TRIGGER_NETDEV_FULL_DUPLEX:
 	case TRIGGER_NETDEV_TX:
 	case TRIGGER_NETDEV_RX:
 		bit = attr;
@@ -324,6 +357,11 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	static DEVICE_ATTR_RW(trigger_name)
 
 DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
+DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
+DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
+DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
+DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
+DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
 DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
 DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
 
@@ -356,6 +394,21 @@ static ssize_t interval_store(struct device *dev,
 
 	cancel_delayed_work_sync(&trigger_data->work);
 
+	if (trigger_data->blink_mode == HARDWARE_CONTROLLED) {
+		/* Interval are handled as triggers. Reset them. */
+		trigger_data->mode &= ~(BIT(TRIGGER_NETDEV_BLINK_8HZ) |
+					BIT(TRIGGER_NETDEV_BLINK_4HZ) |
+					BIT(TRIGGER_NETDEV_BLINK_2HZ));
+
+		/* Support a common value of 2Hz, 4Hz and 8Hz. */
+		if (value > 5 && value <= 62) /* 8Hz */
+			trigger_data->mode |= BIT(TRIGGER_NETDEV_BLINK_8HZ);
+		else if (value > 63 && value <= 125) /* 4Hz */
+			trigger_data->mode |= BIT(TRIGGER_NETDEV_BLINK_4HZ);
+		else /* 2Hz */
+			trigger_data->mode |= BIT(TRIGGER_NETDEV_BLINK_2HZ);
+	}
+
 	atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
 
 	if (!validate_baseline_state(trigger_data)) {
@@ -404,6 +457,11 @@ static DEVICE_ATTR_RO(available_mode);
 static struct attribute *netdev_trig_attrs[] = {
 	&dev_attr_device_name.attr,
 	&dev_attr_link.attr,
+	&dev_attr_link_10.attr,
+	&dev_attr_link_100.attr,
+	&dev_attr_link_1000.attr,
+	&dev_attr_half_duplex.attr,
+	&dev_attr_full_duplex.attr,
 	&dev_attr_rx.attr,
 	&dev_attr_tx.attr,
 	&dev_attr_interval.attr,
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 13862f8b1e07..5fcc6d233757 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -551,8 +551,18 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
 /* Trigger specific enum */
 enum led_trigger_netdev_modes {
 	TRIGGER_NETDEV_LINK = 1,
+	TRIGGER_NETDEV_LINK_10,
+	TRIGGER_NETDEV_LINK_100,
+	TRIGGER_NETDEV_LINK_1000,
+	TRIGGER_NETDEV_HALF_DUPLEX,
+	TRIGGER_NETDEV_FULL_DUPLEX,
 	TRIGGER_NETDEV_TX,
 	TRIGGER_NETDEV_RX,
+
+	/* Hardware Interval options */
+	TRIGGER_NETDEV_BLINK_2HZ,
+	TRIGGER_NETDEV_BLINK_4HZ,
+	TRIGGER_NETDEV_BLINK_8HZ,
 };
 
 /* Trigger specific functions */
-- 
2.37.2

[PATCH v7 10/11] net: dsa: qca8k: add LEDs support

[Christian Marangi]

Add LEDs support for qca8k Switch Family. This will provide the LEDs
hardware API to permit the PHY LED to support hardware mode.
Each port have at least 3 LEDs and they can HW blink, set on/off or
follow blink modes configured with the LED in hardware mode.
Adds support for leds netdev trigger to support hardware triggers.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca/Kconfig      |   9 +
 drivers/net/dsa/qca/Makefile     |   1 +
 drivers/net/dsa/qca/qca8k-8xxx.c |   4 +
 drivers/net/dsa/qca/qca8k-leds.c | 406 +++++++++++++++++++++++++++++++
 drivers/net/dsa/qca/qca8k.h      |  62 +++++
 5 files changed, 482 insertions(+)
 create mode 100644 drivers/net/dsa/qca/qca8k-leds.c

diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig
index ba339747362c..be67164a444e 100644
--- a/drivers/net/dsa/qca/Kconfig
+++ b/drivers/net/dsa/qca/Kconfig
@@ -15,3 +15,12 @@ config NET_DSA_QCA8K
 	help
 	  This enables support for the Qualcomm Atheros QCA8K Ethernet
 	  switch chips.
+
+config NET_DSA_QCA8K_LEDS_SUPPORT
+	tristate "Qualcomm Atheros QCA8K Ethernet switch family LEDs support"
+	depends on NET_DSA_QCA8K
+	select LEDS_OFFLOAD_TRIGGERS
+	help
+	  This enabled support for LEDs present on the Qualcomm Atheros
+	  QCA8K Ethernet switch chips. This require the LEDs offload
+	  triggers support as it can run in offload mode.
diff --git a/drivers/net/dsa/qca/Makefile b/drivers/net/dsa/qca/Makefile
index 701f1d199e93..330ae389e489 100644
--- a/drivers/net/dsa/qca/Makefile
+++ b/drivers/net/dsa/qca/Makefile
@@ -2,3 +2,4 @@
 obj-$(CONFIG_NET_DSA_AR9331)	+= ar9331.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
 qca8k-y 			+= qca8k-common.o qca8k-8xxx.o
+obj-$(CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT) += qca8k-leds.o
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
index c5c3b4e92f28..90916d8d8afe 100644
--- a/drivers/net/dsa/qca/qca8k-8xxx.c
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -1690,6 +1690,10 @@ qca8k_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
+	ret = qca8k_setup_led_ctrl(priv);
+	if (ret)
+		return ret;
+
 	qca8k_setup_pcs(priv, &priv->pcs_port_0, 0);
 	qca8k_setup_pcs(priv, &priv->pcs_port_6, 6);
 
diff --git a/drivers/net/dsa/qca/qca8k-leds.c b/drivers/net/dsa/qca/qca8k-leds.c
new file mode 100644
index 000000000000..b51cdcae31b2
--- /dev/null
+++ b/drivers/net/dsa/qca/qca8k-leds.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <net/dsa.h>
+#include <linux/regmap.h>
+
+#include "qca8k.h"
+
+static int
+qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info)
+{
+	int shift;
+
+	switch (port_num) {
+	case 0:
+		reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
+		reg_info->shift = 14;
+		break;
+	case 1:
+	case 2:
+	case 3:
+		reg_info->reg = QCA8K_LED_CTRL_REG(3);
+		shift = 2 * led_num + (6 * (port_num - 1));
+
+		reg_info->shift = 8 + shift;
+
+		break;
+	case 4:
+		reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
+		reg_info->shift = 30;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int
+qca8k_get_control_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info)
+{
+	reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
+
+	/* 6 total control rule:
+	 * 3 control rules for phy0-3 that applies to all their leds
+	 * 3 control rules for phy4
+	 */
+	if (port_num == 4)
+		reg_info->shift = 16;
+	else
+		reg_info->shift = 0;
+
+	return 0;
+}
+
+static int
+qca8k_parse_netdev(unsigned long rules, u32 *offload_trigger, u32 *mask)
+{
+	/* Parsing specific to netdev trigger */
+	if (test_bit(TRIGGER_NETDEV_LINK, &rules))
+		*offload_trigger = QCA8K_LED_LINK_10M_EN_MASK |
+				   QCA8K_LED_LINK_100M_EN_MASK |
+				   QCA8K_LED_LINK_1000M_EN_MASK;
+	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
+		*offload_trigger = QCA8K_LED_LINK_10M_EN_MASK;
+	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
+		*offload_trigger = QCA8K_LED_LINK_100M_EN_MASK;
+	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
+		*offload_trigger = QCA8K_LED_LINK_1000M_EN_MASK;
+	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
+		*offload_trigger = QCA8K_LED_HALF_DUPLEX_MASK;
+	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
+		*offload_trigger = QCA8K_LED_FULL_DUPLEX_MASK;
+	if (test_bit(TRIGGER_NETDEV_TX, &rules))
+		*offload_trigger = QCA8K_LED_TX_BLINK_MASK;
+	if (test_bit(TRIGGER_NETDEV_RX, &rules))
+		*offload_trigger = QCA8K_LED_RX_BLINK_MASK;
+	if (test_bit(TRIGGER_NETDEV_BLINK_2HZ, &rules))
+		*offload_trigger = QCA8K_LED_BLINK_2HZ;
+	if (test_bit(TRIGGER_NETDEV_BLINK_4HZ, &rules))
+		*offload_trigger = QCA8K_LED_BLINK_4HZ;
+	if (test_bit(TRIGGER_NETDEV_BLINK_8HZ, &rules))
+		*offload_trigger = QCA8K_LED_BLINK_8HZ;
+
+	if (!*offload_trigger)
+		return -EOPNOTSUPP;
+
+	if (test_bit(TRIGGER_NETDEV_BLINK_2HZ, &rules) ||
+	    test_bit(TRIGGER_NETDEV_BLINK_4HZ, &rules) ||
+	    test_bit(TRIGGER_NETDEV_BLINK_8HZ, &rules)) {
+		*mask = QCA8K_LED_BLINK_FREQ_MASK;
+	} else {
+		*mask = *offload_trigger;
+	}
+
+	return 0;
+}
+
+static int
+qca8k_cled_hw_control_configure(struct led_classdev *ldev, unsigned long rules,
+				enum blink_mode_cmd cmd)
+{
+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+	struct led_trigger *trigger = ldev->trigger;
+	struct qca8k_led_pattern_en reg_info;
+	struct qca8k_priv *priv = led->priv;
+	u32 offload_trigger = 0, mask, val;
+	int ret;
+
+	/* Check trigger compatibility */
+	if (strcmp(trigger->name, "netdev"))
+		return -EOPNOTSUPP;
+
+	if (!strcmp(trigger->name, "netdev"))
+		ret = qca8k_parse_netdev(rules, &offload_trigger, &mask);
+
+	if (ret)
+		return ret;
+
+	qca8k_get_control_led_reg(led->port_num, led->led_num, &reg_info);
+
+	switch (cmd) {
+	case BLINK_MODE_SUPPORTED:
+		/* We reach this point, we are sure the trigger is supported */
+		return 1;
+	case BLINK_MODE_ZERO:
+		/* We set 4hz by default */
+		u32 default_reg = QCA8K_LED_BLINK_4HZ;
+
+		ret = regmap_update_bits(priv->regmap, reg_info.reg,
+					 QCA8K_LED_RULE_MASK << reg_info.shift,
+					 default_reg << reg_info.shift);
+		break;
+	case BLINK_MODE_ENABLE:
+		ret = regmap_update_bits(priv->regmap, reg_info.reg,
+					 mask << reg_info.shift,
+					 offload_trigger << reg_info.shift);
+		break;
+	case BLINK_MODE_DISABLE:
+		ret = regmap_update_bits(priv->regmap, reg_info.reg,
+					 mask << reg_info.shift,
+					 0);
+		break;
+	case BLINK_MODE_READ:
+		ret = regmap_read(priv->regmap, reg_info.reg, &val);
+		if (ret)
+			return ret;
+
+		val >>= reg_info.shift;
+		val &= offload_trigger;
+
+		/* Special handling for LED_BLINK_2HZ */
+		if (!val && offload_trigger == QCA8K_LED_BLINK_2HZ)
+			val = 1;
+
+		return val;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ret;
+}
+
+static void
+qca8k_led_brightness_set(struct qca8k_led *led,
+			 enum led_brightness b)
+{
+	struct qca8k_led_pattern_en reg_info;
+	struct qca8k_priv *priv = led->priv;
+	u32 val = QCA8K_LED_ALWAYS_OFF;
+
+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
+
+	if (b)
+		val = QCA8K_LED_ALWAYS_ON;
+
+	regmap_update_bits(priv->regmap, reg_info.reg,
+			   GENMASK(1, 0) << reg_info.shift,
+			   val << reg_info.shift);
+}
+
+static void
+qca8k_cled_brightness_set(struct led_classdev *ldev,
+			  enum led_brightness b)
+{
+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+
+	return qca8k_led_brightness_set(led, b);
+}
+
+static enum led_brightness
+qca8k_led_brightness_get(struct qca8k_led *led)
+{
+	struct qca8k_led_pattern_en reg_info;
+	struct qca8k_priv *priv = led->priv;
+	u32 val;
+	int ret;
+
+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
+
+	ret = regmap_read(priv->regmap, reg_info.reg, &val);
+	if (ret)
+		return 0;
+
+	val >>= reg_info.shift;
+	val &= GENMASK(1, 0);
+
+	return val > 0 ? 1 : 0;
+}
+
+static enum led_brightness
+qca8k_cled_brightness_get(struct led_classdev *ldev)
+{
+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+
+	return qca8k_led_brightness_get(led);
+}
+
+static int
+qca8k_cled_blink_set(struct led_classdev *ldev,
+		     unsigned long *delay_on,
+		     unsigned long *delay_off)
+{
+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+	struct qca8k_led_pattern_en reg_info;
+	struct qca8k_priv *priv = led->priv;
+
+	if (*delay_on == 0 && *delay_off == 0) {
+		*delay_on = 125;
+		*delay_off = 125;
+	}
+
+	if (*delay_on != 125 || *delay_off != 125) {
+		/* The hardware only supports blinking at 4Hz. Fall back
+		 * to software implementation in other cases.
+		 */
+		return -EINVAL;
+	}
+
+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
+
+	regmap_update_bits(priv->regmap, reg_info.reg,
+			   GENMASK(1, 0) << reg_info.shift,
+			   QCA8K_LED_ALWAYS_BLINK_4HZ << reg_info.shift);
+
+	return 0;
+}
+
+static int
+qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable)
+{
+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+
+	struct qca8k_led_pattern_en reg_info;
+	struct qca8k_priv *priv = led->priv;
+	u32 val = QCA8K_LED_ALWAYS_OFF;
+
+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
+
+	if (enable)
+		val = QCA8K_LED_RULE_CONTROLLED;
+
+	return regmap_update_bits(priv->regmap, reg_info.reg,
+				  GENMASK(1, 0) << reg_info.shift,
+				  val << reg_info.shift);
+}
+
+static int
+qca8k_cled_hw_control_start(struct led_classdev *led_cdev)
+{
+	return qca8k_cled_trigger_offload(led_cdev, true);
+}
+
+static int
+qca8k_cled_hw_control_stop(struct led_classdev *led_cdev)
+{
+	return qca8k_cled_trigger_offload(led_cdev, false);
+}
+
+static bool
+qca8k_cled_hw_control_status(struct led_classdev *ldev)
+{
+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+
+	struct qca8k_led_pattern_en reg_info;
+	struct qca8k_priv *priv = led->priv;
+	u32 val;
+
+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
+
+	regmap_read(priv->regmap, reg_info.reg, &val);
+
+	val >>= reg_info.shift;
+	val &= GENMASK(1, 0);
+
+	return val == QCA8K_LED_RULE_CONTROLLED;
+}
+
+static int
+qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
+{
+	struct fwnode_handle *led = NULL, *leds = NULL;
+	struct led_init_data init_data = { };
+	struct qca8k_led *port_led;
+	int led_num, port_index;
+	const char *state;
+	int ret;
+
+	leds = fwnode_get_named_child_node(port, "leds");
+	if (!leds) {
+		dev_dbg(priv->dev, "No Leds node specified in device tree for port %d!\n",
+			port_num);
+		return 0;
+	}
+
+	fwnode_for_each_child_node(leds, led) {
+		/* Reg represent the led number of the port.
+		 * Each port can have at least 3 leds attached
+		 * Commonly:
+		 * 1. is gigabit led
+		 * 2. is mbit led
+		 * 3. additional status led
+		 */
+		if (fwnode_property_read_u32(led, "reg", &led_num))
+			continue;
+
+		if (led_num >= QCA8K_LED_PORT_COUNT) {
+			dev_warn(priv->dev, "Invalid LED reg defined %d", port_num);
+			continue;
+		}
+
+		port_index = 3 * port_num + led_num;
+
+		port_led = &priv->ports_led[port_index];
+		port_led->port_num = port_num;
+		port_led->led_num = led_num;
+		port_led->priv = priv;
+
+		ret = fwnode_property_read_string(led, "default-state", &state);
+		if (!ret) {
+			if (!strcmp(state, "on")) {
+				port_led->cdev.brightness = 1;
+				qca8k_led_brightness_set(port_led, 1);
+			} else if (!strcmp(state, "off")) {
+				port_led->cdev.brightness = 0;
+				qca8k_led_brightness_set(port_led, 0);
+			} else if (!strcmp(state, "keep")) {
+				port_led->cdev.brightness =
+					qca8k_led_brightness_get(port_led);
+			}
+		}
+
+		/* 3 brightness settings can be applied from Documentation:
+		 * 0 always off
+		 * 1 blink at 4Hz
+		 * 2 always on
+		 * 3 rule controlled
+		 * Suppots only 2 mode: (pcb limitation, with always on and blink
+		 * only the last led is set to this mode)
+		 * 0 always off (sets all leds off)
+		 * 3 rule controlled
+		 */
+		port_led->cdev.blink_mode = SOFTWARE_HARDWARE_CONTROLLED;
+		port_led->cdev.max_brightness = 1;
+		port_led->cdev.brightness_set = qca8k_cled_brightness_set;
+		port_led->cdev.brightness_get = qca8k_cled_brightness_get;
+		port_led->cdev.blink_set = qca8k_cled_blink_set;
+		port_led->cdev.hw_control_start = qca8k_cled_hw_control_start;
+		port_led->cdev.hw_control_stop = qca8k_cled_hw_control_stop;
+		port_led->cdev.hw_control_status = qca8k_cled_hw_control_status;
+		port_led->cdev.hw_control_configure = qca8k_cled_hw_control_configure;
+		init_data.default_label = ":port";
+		init_data.devicename = "qca8k";
+		init_data.fwnode = led;
+
+		ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data);
+		if (ret)
+			dev_warn(priv->dev, "Failed to int led");
+	}
+
+	return 0;
+}
+
+int
+qca8k_setup_led_ctrl(struct qca8k_priv *priv)
+{
+	struct fwnode_handle *mdio, *port;
+	int port_num;
+	int ret;
+
+	mdio = device_get_named_child_node(priv->dev, "mdio");
+	if (!mdio) {
+		dev_info(priv->dev, "No MDIO node specified in device tree!\n");
+		return 0;
+	}
+
+	fwnode_for_each_child_node(mdio, port) {
+		if (fwnode_property_read_u32(port, "reg", &port_num))
+			continue;
+
+		/* Each port can have at least 3 different leds attached */
+		ret = qca8k_parse_port_leds(priv, port, port_num);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
index 0b7a5cb12321..5c535baa7139 100644
--- a/drivers/net/dsa/qca/qca8k.h
+++ b/drivers/net/dsa/qca/qca8k.h
@@ -11,6 +11,7 @@
 #include <linux/delay.h>
 #include <linux/regmap.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/dsa/tag_qca.h>
 
 #define QCA8K_ETHERNET_MDIO_PRIORITY			7
@@ -85,6 +86,43 @@
 #define   QCA8K_MDIO_MASTER_DATA(x)			FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x)
 #define   QCA8K_MDIO_MASTER_MAX_PORTS			5
 #define   QCA8K_MDIO_MASTER_MAX_REG			32
+
+/* LED control register */
+#define QCA8K_LED_COUNT					15
+#define QCA8K_LED_PORT_COUNT				3
+#define QCA8K_LED_RULE_COUNT				6
+#define QCA8K_LED_RULE_MAX				11
+#define QCA8K_LED_CTRL_REG(_i)				(0x050 + (_i) * 4)
+#define QCA8K_LED_CTRL0_REG				0x50
+#define QCA8K_LED_CTRL1_REG				0x54
+#define QCA8K_LED_CTRL2_REG				0x58
+#define QCA8K_LED_CTRL3_REG				0x5C
+#define   QCA8K_LED_CTRL_SHIFT(_i)			(((_i) % 2) * 16)
+#define   QCA8K_LED_CTRL_MASK				GENMASK(15, 0)
+#define QCA8K_LED_RULE_MASK				GENMASK(13, 0)
+#define QCA8K_LED_BLINK_FREQ_MASK			GENMASK(1, 0)
+#define QCA8K_LED_BLINK_FREQ_SHITF			0
+#define   QCA8K_LED_BLINK_2HZ				0
+#define   QCA8K_LED_BLINK_4HZ				1
+#define   QCA8K_LED_BLINK_8HZ				2
+#define   QCA8K_LED_BLINK_AUTO				3
+#define QCA8K_LED_LINKUP_OVER_MASK			BIT(2)
+#define QCA8K_LED_TX_BLINK_MASK				BIT(4)
+#define QCA8K_LED_RX_BLINK_MASK				BIT(5)
+#define QCA8K_LED_COL_BLINK_MASK			BIT(7)
+#define QCA8K_LED_LINK_10M_EN_MASK			BIT(8)
+#define QCA8K_LED_LINK_100M_EN_MASK			BIT(9)
+#define QCA8K_LED_LINK_1000M_EN_MASK			BIT(10)
+#define QCA8K_LED_POWER_ON_LIGHT_MASK			BIT(11)
+#define QCA8K_LED_HALF_DUPLEX_MASK			BIT(12)
+#define QCA8K_LED_FULL_DUPLEX_MASK			BIT(13)
+#define QCA8K_LED_PATTERN_EN_MASK			GENMASK(15, 14)
+#define QCA8K_LED_PATTERN_EN_SHIFT			14
+#define   QCA8K_LED_ALWAYS_OFF				0
+#define   QCA8K_LED_ALWAYS_BLINK_4HZ			1
+#define   QCA8K_LED_ALWAYS_ON				2
+#define   QCA8K_LED_RULE_CONTROLLED			3
+
 #define QCA8K_GOL_MAC_ADDR0				0x60
 #define QCA8K_GOL_MAC_ADDR1				0x64
 #define QCA8K_MAX_FRAME_SIZE				0x78
@@ -388,6 +426,19 @@ struct qca8k_pcs {
 	int port;
 };
 
+struct qca8k_led_pattern_en {
+	u32 reg;
+	u8 shift;
+};
+
+struct qca8k_led {
+	u8 port_num;
+	u8 led_num;
+	u16 old_rule;
+	struct qca8k_priv *priv;
+	struct led_classdev cdev;
+};
+
 struct qca8k_priv {
 	u8 switch_id;
 	u8 switch_revision;
@@ -412,6 +463,7 @@ struct qca8k_priv {
 	struct qca8k_pcs pcs_port_0;
 	struct qca8k_pcs pcs_port_6;
 	const struct qca8k_match_data *info;
+	struct qca8k_led ports_led[QCA8K_LED_COUNT];
 };
 
 struct qca8k_mib_desc {
@@ -517,4 +569,14 @@ int qca8k_port_lag_join(struct dsa_switch *ds, int port, struct dsa_lag lag,
 int qca8k_port_lag_leave(struct dsa_switch *ds, int port,
 			 struct dsa_lag lag);
 
+/* Leds Support function */
+#ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT
+int qca8k_setup_led_ctrl(struct qca8k_priv *priv);
+#else
+static inline int qca8k_setup_led_ctrl(struct qca8k_priv *priv)
+{
+	return 0;
+}
+#endif
+
 #endif /* __QCA8K_H */
-- 
2.37.2

[PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Christian Marangi]

Add LEDs definition example for qca8k using the offload trigger as the
default trigger and add all the supported offload triggers by the
switch.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 978162df51f7..4090cf65c41c 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -65,6 +65,8 @@ properties:
                  internal mdio access is used.
                  With the legacy mapping the reg corresponding to the internal
                  mdio is the switch reg with an offset of -1.
+                 Each phy have at least 3 LEDs connected and can be declared
+                 using the standard LEDs structure.
 
 patternProperties:
   "^(ethernet-)?ports$":
@@ -202,6 +204,7 @@ examples:
     };
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
 
     mdio {
         #address-cells = <1>;
@@ -284,6 +287,27 @@ examples:
 
                 internal_phy_port1: ethernet-phy@0 {
                     reg = <0>;
+
+                    leds {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        led@0 {
+                            reg = <0>;
+                            color = <LED_COLOR_ID_WHITE>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            linux,default-trigger = "netdev";
+                        };
+
+                        led@1 {
+                            reg = <1>;
+                            color = <LED_COLOR_ID_AMBER>;
+                            function = LED_FUNCTION_LAN;
+                            function-enumerator = <1>;
+                            linux,default-trigger = "netdev";
+                        };
+                    };
                 };
 
                 internal_phy_port2: ethernet-phy@1 {
-- 
2.37.2

Re: [PATCH v7 10/11] net: dsa: qca8k: add LEDs support

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2448 bytes --]

Hi Christian,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on pavel-leds/for-next]
[also build test ERROR on robh/for-next net-next/master net/master linus/master v6.1 next-20221214]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Christian-Marangi/Adds-support-for-PHY-LEDs-with-offload-triggers/20221215-080414
base:   git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git for-next
patch link:    https://lore.kernel.org/r/20221214235438.30271-11-ansuelsmth%40gmail.com
patch subject: [PATCH v7 10/11] net: dsa: qca8k: add LEDs support
config: sh-allmodconfig
compiler: sh4-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/c3cb4f8cc2edb081c2b31733ed02cb2c022320f1
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Christian-Marangi/Adds-support-for-PHY-LEDs-with-offload-triggers/20221215-080414
        git checkout c3cb4f8cc2edb081c2b31733ed02cb2c022320f1
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sh SHELL=/bin/bash drivers/net/dsa/qca/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/net/dsa/qca/qca8k-leds.c:383:1: error: redefinition of 'qca8k_setup_led_ctrl'
     383 | qca8k_setup_led_ctrl(struct qca8k_priv *priv)
         | ^~~~~~~~~~~~~~~~~~~~
   In file included from drivers/net/dsa/qca/qca8k-leds.c:5:
   drivers/net/dsa/qca/qca8k.h:576:19: note: previous definition of 'qca8k_setup_led_ctrl' with type 'int(struct qca8k_priv *)'
     576 | static inline int qca8k_setup_led_ctrl(struct qca8k_priv *priv)
         |                   ^~~~~~~~~~~~~~~~~~~~


vim +/qca8k_setup_led_ctrl +383 drivers/net/dsa/qca/qca8k-leds.c

   381	
   382	int
 > 383	qca8k_setup_led_ctrl(struct qca8k_priv *priv)

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 244139 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/sh 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="sh4-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_TIME_KUNIT_TEST=m

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_SUPERH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_PGTABLE_LEVELS=2

#
# System type
#
CONFIG_CPU_SH2=y
CONFIG_CPU_SUBTYPE_SH7619=y
# CONFIG_CPU_SUBTYPE_J2 is not set
# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7264 is not set
# CONFIG_CPU_SUBTYPE_SH7269 is not set
# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7734 is not set
# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SH7786 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set

#
# Memory management options
#
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_ARCH_FORCE_MAX_ORDER=14
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_32BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# end of Memory management options

#
# Cache configuration
#
# CONFIG_CACHE_WRITEBACK is not set
CONFIG_CACHE_WRITETHROUGH=y
# CONFIG_CACHE_OFF is not set
# end of Cache configuration

#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU_EMU=y
# end of Processor features

#
# Board support
#
CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_CUSTOM_CLK=y
CONFIG_SH_7619_SOLUTION_ENGINE=y
# end of Board support

#
# Timer and clock configuration
#
CONFIG_SH_PCLK_FREQ=31250000
CONFIG_SH_CLK_CPG=y
CONFIG_SH_CLK_CPG_LEGACY=y
# end of Timer and clock configuration

#
# CPU Frequency scaling
#

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=m
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_SH_CPU_FREQ=m
# end of CPU Frequency scaling
# end of CPU Frequency scaling

#
# DMA support
#
# end of DMA support

#
# Companion Chips
#
# end of Companion Chips

#
# Additional SuperH Device Drivers
#
CONFIG_HEARTBEAT=y
CONFIG_PUSH_SWITCH=m
# end of Additional SuperH Device Drivers
# end of System type

#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x08000000
CONFIG_GUSA=y

#
# SuperH / SH-Mobile Driver Options
#
CONFIG_SH_INTC=y

#
# Interrupt controller options
#
CONFIG_INTC_USERIMASK=y
CONFIG_INTC_MAPPING_DEBUG=y
# end of SuperH / SH-Mobile Driver Options
# end of Kernel features

#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200"
# end of Boot options

#
# Bus options
#
# end of Bus options

#
# Power management options (EXPERIMENTAL)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_OF=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
# end of CPU Idle
# end of Power management options (EXPERIMENTAL)

#
# General architecture-dependent options
#
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_NO_EFFICIENT_FFS=y
CONFIG_LOCK_EVENT_COUNTS=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BFQ_CGROUP_DEBUG=y
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=m
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT_OLD=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MEMORY_BALLOON=y
CONFIG_PAGE_REPORTING=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
CONFIG_NEED_PER_CPU_KM=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y

#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_SYSFS=y
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=m
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_INTERFACE=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=m
CONFIG_MPTCP_KUNIT_TEST=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_TWOS=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_BPFILTER=y
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_TCP=m
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_AR9331=m
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
CONFIG_NET_DSA_TAG_BRCM_LEGACY=m
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
CONFIG_NET_DSA_TAG_HELLCREEK=m
CONFIG_NET_DSA_TAG_GSWIP=m
CONFIG_NET_DSA_TAG_DSA_COMMON=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
CONFIG_NET_DSA_TAG_MTK=m
CONFIG_NET_DSA_TAG_KSZ=m
CONFIG_NET_DSA_TAG_OCELOT=m
CONFIG_NET_DSA_TAG_OCELOT_8021Q=m
CONFIG_NET_DSA_TAG_QCA=m
CONFIG_NET_DSA_TAG_RTL4_A=m
CONFIG_NET_DSA_TAG_RTL8_4=m
CONFIG_NET_DSA_TAG_RZN1_A5PSW=m
CONFIG_NET_DSA_TAG_LAN9303=m
CONFIG_NET_DSA_TAG_SJA1105=m
CONFIG_NET_DSA_TAG_TRAILER=m
CONFIG_NET_DSA_TAG_XRS700X=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_PHONET=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_SKBPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_FQ_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_ETS=m
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
# CONFIG_DEFAULT_FQ_CODEL is not set
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
CONFIG_NET_ACT_GATE=m
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_BATMAN_ADV_TRACING=y
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=m
CONFIG_HSR=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_QRTR_MHI=m
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_HWBM=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=m
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
# end of AX.25 network device drivers

CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
CONFIG_BT_SELFTEST=y
CONFIG_BT_SELFTEST_ECDH=y
CONFIG_BT_SELFTEST_SMP=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_MTK=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_MTKSDIO=m
CONFIG_BT_MTKUART=m
CONFIG_BT_QCOMSMD=m
CONFIG_BT_HCIRSI=m
CONFIG_BT_VIRTIO=m
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR=""
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_OCB_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=m
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=m
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
CONFIG_NFC_VIRTUAL_NCI=m
CONFIG_NFC_FDP=m
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
CONFIG_NFC_MRVL_UART=m
CONFIG_NFC_MRVL_I2C=m
CONFIG_NFC_MRVL_SPI=m
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_ST_NCI_SPI=m
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
CONFIG_NFC_S3FWRN82_UART=m
CONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=m
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=m

#
# Device Drivers
#
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y

#
# PC-card bridges
#

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=m
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_AC97=m
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_REGMAP_SCCB=m
CONFIG_REGMAP_I3C=m
CONFIG_REGMAP_SPI_AVMM=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_INTEGRATOR_LM=y
CONFIG_BT1_APB=y
CONFIG_BT1_AXI=y
CONFIG_MOXTET=m
CONFIG_HISILICON_LPC=y
CONFIG_INTEL_IXP4XX_EB=y
CONFIG_QCOM_EBI2=y
CONFIG_MHI_BUS=m
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_EP=m
# end of Bus devices

CONFIG_CONNECTOR=m

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=m
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_HAVE_MSG=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE=y
CONFIG_ARM_SCMI_POWER_DOMAIN=m
CONFIG_ARM_SCMI_POWER_CONTROL=m
# end of ARM System Control and Management Interface Protocol

CONFIG_ARM_SCPI_PROTOCOL=m
CONFIG_ARM_SCPI_POWER_DOMAIN=m
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_MTK_ADSP_IPC=m
CONFIG_QCOM_SCM=m
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_TEE_BNXT_FW=m
CONFIG_CS_DSP=m
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=m
CONFIG_GOOGLE_MEMCONSOLE=m
CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=m
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
CONFIG_GOOGLE_VPD=m
CONFIG_IMX_DSP=m
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
CONFIG_GNSS_USB=m
CONFIG_MTD=m
CONFIG_MTD_TESTS=m

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_BCM63XX_PARTS=y
CONFIG_MTD_BRCM_U_BOOT=m
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_OF_PARTS=m
CONFIG_MTD_OF_PARTS_BCM4908=y
CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
CONFIG_MTD_PARSER_IMAGETAG=m
CONFIG_MTD_PARSER_TRX=m
CONFIG_MTD_SHARPSL_PARTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_QCOMSMEM_PARTS=m
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_PSTORE=m
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_BT1_ROM=y
CONFIG_MTD_PHYSMAP_VERSATILE=y
CONFIG_MTD_PHYSMAP_GEMINI=y
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SOLUTIONENGINE=m
CONFIG_MTD_PCMCIA=m
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_MCHP23K256=m
CONFIG_MTD_MCHP48L640=m
CONFIG_MTD_SPEAR_SMI=m
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_ONENAND_SAMSUNG=m
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=m

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_AMS_DELTA=m
CONFIG_MTD_NAND_OMAP2=m
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_NAND_OMAP_BCH_BUILD=m
CONFIG_MTD_NAND_SHARPSL=m
CONFIG_MTD_NAND_ATMEL=m
CONFIG_MTD_NAND_MARVELL=m
CONFIG_MTD_NAND_SLC_LPC32XX=m
CONFIG_MTD_NAND_MLC_LPC32XX=m
CONFIG_MTD_NAND_BRCMNAND=m
CONFIG_MTD_NAND_BRCMNAND_BCM63XX=m
CONFIG_MTD_NAND_BRCMNAND_BCMBCA=m
CONFIG_MTD_NAND_BRCMNAND_BRCMSTB=m
CONFIG_MTD_NAND_BRCMNAND_IPROC=m
CONFIG_MTD_NAND_OXNAS=m
CONFIG_MTD_NAND_FSL_IFC=m
CONFIG_MTD_NAND_VF610_NFC=m
CONFIG_MTD_NAND_MXC=m
CONFIG_MTD_NAND_SH_FLCTL=m
CONFIG_MTD_NAND_DAVINCI=m
CONFIG_MTD_NAND_TXX9NDFMC=m
CONFIG_MTD_NAND_JZ4780=m
CONFIG_MTD_NAND_INGENIC_ECC=y
CONFIG_MTD_NAND_JZ4740_ECC=m
CONFIG_MTD_NAND_JZ4725B_BCH=m
CONFIG_MTD_NAND_JZ4780_BCH=m
CONFIG_MTD_NAND_FSMC=m
CONFIG_MTD_NAND_SUNXI=m
CONFIG_MTD_NAND_HISI504=m
CONFIG_MTD_NAND_QCOM=m
CONFIG_MTD_NAND_MTK=m
CONFIG_MTD_NAND_MXIC=m
CONFIG_MTD_NAND_TEGRA=m
CONFIG_MTD_NAND_STM32_FMC2=m
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_NAND_CADENCE=m
CONFIG_MTD_NAND_INTEL_LGM=m
CONFIG_MTD_NAND_RENESAS=m

#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=m

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=y
CONFIG_MTD_NAND_ECC_MEDIATEK=m
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_SPI_HISI_SFC=m
CONFIG_SPI_NXP_SPIFI=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=m
CONFIG_HBMC_AM654=m
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_CDROM=m
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=m
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_UBLK=m

#
# NVME Support
#
CONFIG_NVME_COMMON=m
CONFIG_NVME_CORE=m
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_TCP=m
CONFIG_NVME_AUTH=y
CONFIG_NVME_APPLE=m
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_TCP=m
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_DUMMY_IRQ=m
CONFIG_ICS932S401=m
CONFIG_ATMEL_SSC=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_GEHC_ACHC=m
CONFIG_HI6421V600_IRQ=m
CONFIG_QCOM_COINCELL=m
CONFIG_QCOM_FASTRPC=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=m
CONFIG_MISC_RTSX=m
CONFIG_HISI_HIKEY_USB=m
CONFIG_OPEN_DICE=m
CONFIG_VCPU_STALL_DETECTOR=m
CONFIG_C2PORT=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=m
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_SPI=m
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module (requires I2C)
#
CONFIG_ALTERA_STAPL=m
CONFIG_ECHO=m
CONFIG_MISC_RTSX_USB=m
CONFIG_UACCE=m
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=m
CONFIG_SCSI=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_HISI_SAS=m
CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support

CONFIG_HAVE_PATA_PLATFORM=y
CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#

#
# PIO-only SFF controllers
#
CONFIG_PATA_IXP4XX_CF=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_OF_PLATFORM=m
CONFIG_PATA_SAMSUNG_CF=m

#
# Generic fallback / legacy drivers
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
CONFIG_DM_CLONE=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_MULTIPATH_HST=m
CONFIG_DM_MULTIPATH_IOA=m
CONFIG_DM_DELAY=m
CONFIG_DM_DUST=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_ZONED=m
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_SBP_TARGET=m

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# end of IEEE 1394 (FireWire) support

CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_WIREGUARD=m
CONFIG_WIREGUARD_DEBUG=y
CONFIG_EQUALIZER=m
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_BAREUDP=m
CONFIG_GTP=m
CONFIG_AMT=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NET_VRF=m
CONFIG_VSOCKMON=m
CONFIG_MHI_NET=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_TTY=m

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=m
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
CONFIG_B53_SERDES=m
CONFIG_NET_DSA_BCM_SF2=m
CONFIG_NET_DSA_LOOP=m
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=m
CONFIG_NET_DSA_LANTIQ_GSWIP=m
CONFIG_NET_DSA_MT7530=m
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m
CONFIG_NET_DSA_MICROCHIP_KSZ_SPI=m
CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI=m
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MSCC_SEVILLE=m
CONFIG_NET_DSA_AR9331=m
CONFIG_NET_DSA_QCA8K=m
CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=m
CONFIG_NET_DSA_SJA1105=m
CONFIG_NET_DSA_SJA1105_PTP=y
CONFIG_NET_DSA_SJA1105_TAS=y
CONFIG_NET_DSA_SJA1105_VL=y
CONFIG_NET_DSA_XRS700X=m
CONFIG_NET_DSA_XRS700X_I2C=m
CONFIG_NET_DSA_XRS700X_MDIO=m
CONFIG_NET_DSA_REALTEK=m
CONFIG_NET_DSA_REALTEK_MDIO=m
CONFIG_NET_DSA_REALTEK_SMI=m
CONFIG_NET_DSA_REALTEK_RTL8365MB=m
CONFIG_NET_DSA_REALTEK_RTL8366RB=m
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
CONFIG_NET_DSA_VITESSE_VSC73XX=m
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_NET_VENDOR_ACTIONS=y
CONFIG_OWL_EMAC=m
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_PCMCIA_NMCLAN=m
CONFIG_AMD_XGBE=m
CONFIG_AMD_XGBE_DCB=y
CONFIG_NET_XGENE=m
CONFIG_NET_XGENE_V2=m
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_ARC_EMAC_CORE=m
CONFIG_ARC_EMAC=m
CONFIG_EMAC_ROCKCHIP=m
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=m
CONFIG_SPI_AX88796C_COMPRESSION=y
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=m
CONFIG_CS89x0_PLATFORM=m
CONFIG_EP93XX_ETH=m
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=m
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9000=m
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
CONFIG_DM9051=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=m
CONFIG_NET_VENDOR_FARADAY=y
CONFIG_FTMAC100=m
CONFIG_FTGMAC100=m
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=m
CONFIG_FSL_FMAN=m
CONFIG_FSL_PQ_MDIO=m
CONFIG_FSL_XGMAC_MDIO=m
CONFIG_FSL_DPAA2_SWITCH=m
CONFIG_FSL_ENETC_IERB=m
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HISILICON=y
CONFIG_HIX5HD2_GMAC=m
CONFIG_HISI_FEMAC=m
CONFIG_HIP04_ETH=m
CONFIG_HI13X1_GMAC=y
CONFIG_HNS_MDIO=m
CONFIG_HNS=m
CONFIG_HNS_DSAF=m
CONFIG_HNS_ENET=m
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_KORINA=m
CONFIG_NET_VENDOR_ADI=y
CONFIG_ADIN1110=m
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=m
CONFIG_MVMDIO=m
CONFIG_MVNETA_BM_ENABLE=m
CONFIG_MVNETA=m
CONFIG_MVNETA_BM=m
CONFIG_MVPP2=m
CONFIG_MVPP2_PTP=y
CONFIG_PXA168_ETH=m
CONFIG_PRESTERA=m
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NET_MEDIATEK_SOC_WED=y
CONFIG_NET_MEDIATEK_SOC=m
CONFIG_NET_MEDIATEK_STAR_EMAC=m
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_MINIMAL=m
CONFIG_MLXFW=m
CONFIG_MLXBF_GIGE=m
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ENCX24J600=m
CONFIG_LAN966X_SWITCH=m
CONFIG_SPARX5_SWITCH=m
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=m
CONFIG_MSCC_OCELOT_SWITCH=m
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_AX88796=m
CONFIG_AX88796_93CX6=y
CONFIG_PCMCIA_PCNET=m
CONFIG_STNIC=m
CONFIG_LPC_ENET=m
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=m
CONFIG_QCA7000_SPI=m
CONFIG_QCA7000_UART=m
CONFIG_RMNET=m
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_SH_ETH=m
CONFIG_RAVB=m
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_SMC911X=m
CONFIG_SMSC911X=m
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_SNI_AVE=m
CONFIG_SNI_NETSEC=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_NET_VENDOR_SUNPLUS=y
CONFIG_SP7021_EMAC=m
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=m
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=m
CONFIG_XILINX_AXI_EMAC=m
CONFIG_XILINX_LL_TEMAC=m
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_QCOM_IPA=m
CONFIG_PHYLINK=m
CONFIG_PHYLIB=m
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=m
CONFIG_SFP=m

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
CONFIG_MESON_GXL_PHY=m
CONFIG_ADIN_PHY=m
CONFIG_ADIN1100_PHY=m
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM54140_PHY=m
CONFIG_BCM63XX_PHY=m
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM84881_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_CYGNUS_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BCM_NET_PHYPTP=m
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_LXT_PHY=m
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
CONFIG_MARVELL_88X2222_PHY=m
CONFIG_MAXLINEAR_GPHY=m
CONFIG_MEDIATEK_GE_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_PHY=m
CONFIG_MICROCHIP_T1_PHY=m
CONFIG_MICROSEMI_PHY=m
CONFIG_MOTORCOMM_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_NXP_C45_TJA11XX_PHY=m
CONFIG_NXP_TJA11XX_PHY=m
CONFIG_AT803X_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_RENESAS_PHY=m
CONFIG_ROCKCHIP_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
CONFIG_DP83822_PHY=m
CONFIG_DP83TC811_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_DP83869_PHY=m
CONFIG_DP83TD510_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
CONFIG_MICREL_KS8995MA=m
CONFIG_PSE_CONTROLLER=y
CONFIG_PSE_REGULATOR=m
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
CONFIG_CAN_VXCAN=m
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
CONFIG_CAN_AT91=m
CONFIG_CAN_CAN327=m
CONFIG_CAN_FLEXCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_SUN4I=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
CONFIG_CAN_CTUCANFD=m
CONFIG_CAN_CTUCANFD_PLATFORM=m
CONFIG_CAN_IFI_CANFD=m
CONFIG_CAN_M_CAN=m
CONFIG_CAN_M_CAN_PLATFORM=m
CONFIG_CAN_M_CAN_TCAN4X5X=m
CONFIG_CAN_RCAR=m
CONFIG_CAN_RCAR_CANFD=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCMCIA=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m

#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=m
CONFIG_CAN_MCP251X=m
CONFIG_CAN_MCP251XFD=m
CONFIG_CAN_MCP251XFD_SANITY=y
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB=m
CONFIG_CAN_ETAS_ES58X=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_MCBA_USB=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_UCAN=m
# end of CAN USB interfaces

CONFIG_CAN_DEBUG_DEVICES=y

#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=m
CONFIG_MCTP_TRANSPORT_I2C=m
# end of MCTP Device Drivers

CONFIG_MDIO_DEVICE=m
CONFIG_MDIO_BUS=m
CONFIG_FWNODE_MDIO=m
CONFIG_OF_MDIO=m
CONFIG_MDIO_DEVRES=m
CONFIG_MDIO_SUN4I=m
CONFIG_MDIO_XGENE=m
CONFIG_MDIO_ASPEED=m
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_BCM_IPROC=m
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MDIO_CAVIUM=m
CONFIG_MDIO_GPIO=m
CONFIG_MDIO_HISI_FEMAC=m
CONFIG_MDIO_I2C=m
CONFIG_MDIO_MVUSB=m
CONFIG_MDIO_MSCC_MIIM=m
CONFIG_MDIO_MOXART=m
CONFIG_MDIO_OCTEON=m
CONFIG_MDIO_IPQ8064=m

#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=m
CONFIG_MDIO_BUS_MUX_BCM6368=m
CONFIG_MDIO_BUS_MUX_BCM_IPROC=m
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=m
CONFIG_MDIO_BUS_MUX_MMIOREG=m

#
# PCS device drivers
#
CONFIG_PCS_XPCS=m
CONFIG_PCS_LYNX=m
CONFIG_PCS_RZN1_MIIC=m
# end of PCS device drivers

CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_USB_NET_AQC111=m
CONFIG_USB_RTL8153_ECM=m
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH_TRACEPOINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_CERT_TESTING=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K_HTC=m
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_COMMON_SPECTRAL=y
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
CONFIG_ATH6KL_DEBUG=y
CONFIG_ATH6KL_TRACING=y
CONFIG_ATH6KL_REGDOMAIN=y
CONFIG_AR5523=m
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_BRCMUTIL=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO_CS=m
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_CS=m
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_SPI=m
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=m
CONFIG_MT76_SDIO=m
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=m
CONFIG_MT76_CONNAC_LIB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2U=m
CONFIG_MT7615_COMMON=m
CONFIG_MT7663_USB_SDIO_COMMON=m
CONFIG_MT7663U=m
CONFIG_MT7663S=m
CONFIG_MT7921_COMMON=m
CONFIG_MT7921S=m
CONFIG_MT7921U=m
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=m
CONFIG_WILC1000_SDIO=m
CONFIG_WILC1000_SPI=m
CONFIG_WILC1000_HW_OOB_INTR=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_PLFXLC=m
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_USB=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8XXXU=m
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=m
CONFIG_RTW89=m
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WFX=m
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
CONFIG_ZD1211RW_DEBUG=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_MAC80211_HWSIM=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_VIRT_WIFI=m
CONFIG_WAN=y
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_FSL_UCC_HDLC=m
CONFIG_SLIC_DS26522=m
CONFIG_LAPBETHER=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_MRF24J40=m
CONFIG_IEEE802154_CC2520=m
CONFIG_IEEE802154_ATUSB=m
CONFIG_IEEE802154_ADF7242=m
CONFIG_IEEE802154_MCR20A=m
CONFIG_IEEE802154_HWSIM=m

#
# Wireless WAN
#
CONFIG_WWAN=m
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=m
CONFIG_MHI_WWAN_CTRL=m
CONFIG_MHI_WWAN_MBIM=m
CONFIG_QCOM_BAM_DMUX=m
CONFIG_RPMSG_WWAN_CTRL=m
# end of Wireless WAN

CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCUSB=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
CONFIG_INPUT_VIVALDIFMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_QT1050=m
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_CLPS711X=m
CONFIG_KEYBOARD_DLINK_DIR685=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_EP93XX=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_SNVS_PWRKEY=m
CONFIG_KEYBOARD_IMX=m
CONFIG_KEYBOARD_IMX_SC_KEY=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_PINEPHONE=m
CONFIG_KEYBOARD_PMIC8XXX=m
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_GOLDFISH_EVENTS=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_ST_KEYSCAN=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_SH_KEYSC=m
CONFIG_KEYBOARD_STMPE=m
CONFIG_KEYBOARD_IQS62X=m
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_KEYBOARD_CAP11XX=m
CONFIG_KEYBOARD_BCM=m
CONFIG_KEYBOARD_MT6779=m
CONFIG_KEYBOARD_MTK_PMIC=m
CONFIG_KEYBOARD_CYPRESS_SF=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADC=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_JOYSTICK_PSXPAD_SPI=m
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=m
CONFIG_JOYSTICK_QWIIC=m
CONFIG_JOYSTICK_FSIA6B=m
CONFIG_JOYSTICK_SENSEHAT=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_AR1021_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_BU21029=m
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
CONFIG_TOUCHSCREEN_CY8CTMA140=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m
CONFIG_TOUCHSCREEN_DA9052=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
CONFIG_TOUCHSCREEN_EXC3000=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_HIDEEP=m
CONFIG_TOUCHSCREEN_HYCON_HY46XX=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_ILITEK=m
CONFIG_TOUCHSCREEN_IPROC=m
CONFIG_TOUCHSCREEN_S6SY761=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MSG2638=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_IMAGIS=m
CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m
CONFIG_TOUCHSCREEN_MIGOR=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MXS_LRADC=m
CONFIG_TOUCHSCREEN_MX25=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TS4800=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMFTS=m
CONFIG_TOUCHSCREEN_STMPE=m
CONFIG_TOUCHSCREEN_SUN4I=m
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZET6223=m
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_TOUCHSCREEN_COLIBRI_VF50=m
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_TOUCHSCREEN_IQS5XX=m
CONFIG_TOUCHSCREEN_ZINITIX=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM80X_ONKEY=m
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_ARIEL_PWRBUTTON=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
CONFIG_INPUT_ATC260X_ONKEY=m
CONFIG_INPUT_ATMEL_CAPTOUCH=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_PM8941_PWRKEY=m
CONFIG_INPUT_PM8XXX_VIBRATOR=m
CONFIG_INPUT_PMIC8XXX_PWRKEY=m
CONFIG_INPUT_MAX77650_ONKEY=m
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_GPIO_BEEPER=m
CONFIG_INPUT_GPIO_DECODER=m
CONFIG_INPUT_GPIO_VIBRA=m
CONFIG_INPUT_CPCAP_PWRBUTTON=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_REGULATOR_HAPTIC=m
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_RK805_PWRKEY=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA7280_HAPTICS=m
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9063_ONKEY=m
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT_PCAP=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_IBM_PANEL=m
CONFIG_INPUT_IMS_PCU=m
CONFIG_INPUT_IQS269A=m
CONFIG_INPUT_IQS626A=m
CONFIG_INPUT_IQS7222=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2665_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=m
CONFIG_INPUT_HISI_POWERKEY=m
CONFIG_INPUT_RAVE_SP_PWRBUTTON=m
CONFIG_INPUT_SC27XX_VIBRA=m
CONFIG_INPUT_RT5120_PWRKEY=m
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
CONFIG_SERIO_APBPS2=m
CONFIG_SERIO_OLPC_APSP=m
CONFIG_SERIO_SUN4I_PS2=m
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_MEN_MCB=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_ASPEED_VUART=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=m
CONFIG_SERIAL_8250_DW=m
CONFIG_SERIAL_8250_EM=m
CONFIG_SERIAL_8250_IOC3=m
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_OMAP=m
CONFIG_SERIAL_8250_LPC18XX=m
CONFIG_SERIAL_8250_MT6577=m
CONFIG_SERIAL_8250_UNIPHIER=m
CONFIG_SERIAL_8250_INGENIC=m
CONFIG_SERIAL_8250_PXA=m
CONFIG_SERIAL_8250_TEGRA=m
CONFIG_SERIAL_8250_BCM7271=m
CONFIG_SERIAL_OF_PLATFORM=m

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=m
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MESON=m
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_CLPS711X=m
CONFIG_SERIAL_SAMSUNG=m
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=m
CONFIG_SERIAL_TEGRA_TCU=m
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_MAX310X=m
CONFIG_SERIAL_IMX=m
CONFIG_SERIAL_IMX_CONSOLE=m
CONFIG_SERIAL_IMX_EARLYCON=y
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_SH_SCI=m
CONFIG_SERIAL_SH_SCI_NR_UARTS=10
CONFIG_SERIAL_HS_LPC32XX=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_MSM=m
CONFIG_SERIAL_QCOM_GENI=m
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
CONFIG_SERIAL_OMAP=m
CONFIG_SERIAL_SIFIVE=m
CONFIG_SERIAL_LANTIQ=m
CONFIG_SERIAL_QE=m
CONFIG_SERIAL_SCCNXP=m
CONFIG_SERIAL_SC16IS7XX_CORE=m
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_BCM63XX=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_MXS_AUART=m
CONFIG_SERIAL_XILINX_PS_UART=m
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_FSL_LINFLEXUART=m
CONFIG_SERIAL_CONEXANT_DIGICOLOR=m
CONFIG_SERIAL_ST_ASC=m
CONFIG_SERIAL_MEN_Z135=m
CONFIG_SERIAL_STM32=m
CONFIG_SERIAL_OWL=m
CONFIG_SERIAL_RDA=y
CONFIG_SERIAL_RDA_CONSOLE=y
CONFIG_SERIAL_MILBEAUT_USIO=m
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
CONFIG_SERIAL_LITEUART=m
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_SUNPLUS=m
CONFIG_SERIAL_SUNPLUS_CONSOLE=y
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=m
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
CONFIG_RPMSG_TTY=m
CONFIG_SERIAL_DEV_BUS=m
CONFIG_TTY_PRINTK=m
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_IPMB=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_IPMI_KCS_BMC=m
CONFIG_ASPEED_KCS_IPMI_BMC=m
CONFIG_NPCM7XX_KCS_IPMI_BMC=m
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=m
CONFIG_IPMI_KCS_BMC_SERIO=m
CONFIG_ASPEED_BT_IPMI_BMC=m
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_ATMEL=m
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_BCM2835=m
CONFIG_HW_RANDOM_IPROC_RNG200=m
CONFIG_HW_RANDOM_IXP4XX=m
CONFIG_HW_RANDOM_OMAP=m
CONFIG_HW_RANDOM_OMAP3_ROM=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_IMX_RNGC=m
CONFIG_HW_RANDOM_NOMADIK=m
CONFIG_HW_RANDOM_STM32=m
CONFIG_HW_RANDOM_POLARFIRE_SOC=m
CONFIG_HW_RANDOM_MESON=m
CONFIG_HW_RANDOM_MTK=m
CONFIG_HW_RANDOM_EXYNOS=m
CONFIG_HW_RANDOM_NPCM=m
CONFIG_HW_RANDOM_KEYSTONE=m
CONFIG_HW_RANDOM_CCTRNG=m
CONFIG_HW_RANDOM_XIPHERA=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_SCR24X=m
CONFIG_IPWIRELESS=m
# end of PCMCIA character devices

CONFIG_DEVMEM=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=m
CONFIG_TCG_TIS_SYNQUACER=m
CONFIG_TCG_TIS_I2C_CR50=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TCG_TIS_ST33ZP24_SPI=m
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYUSB=m
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_DEMUX_PINCTRL=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_HIX5HD2=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=m
CONFIG_I2C_ASPEED=m
CONFIG_I2C_AT91=m
CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL=m
CONFIG_I2C_AXXIA=m
CONFIG_I2C_BCM_IPROC=m
CONFIG_I2C_BCM_KONA=m
CONFIG_I2C_BRCMSTB=m
CONFIG_I2C_CADENCE=m
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DAVINCI=m
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DIGICOLOR=m
CONFIG_I2C_EMEV2=m
CONFIG_I2C_EXYNOS5=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_HIGHLANDER=m
CONFIG_I2C_HISI=m
CONFIG_I2C_IMG=m
CONFIG_I2C_IMX=m
CONFIG_I2C_IMX_LPI2C=m
CONFIG_I2C_IOP3XX=m
CONFIG_I2C_JZ4780=m
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_LPC2K=m
CONFIG_I2C_MICROCHIP_CORE=m
CONFIG_I2C_MT65XX=m
CONFIG_I2C_MT7621=m
CONFIG_I2C_MV64XXX=m
CONFIG_I2C_MXS=m
CONFIG_I2C_NPCM=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_OMAP=m
CONFIG_I2C_OWL=m
CONFIG_I2C_APPLE=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PNX=m
CONFIG_I2C_PXA=m
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=m
CONFIG_I2C_QCOM_GENI=m
CONFIG_I2C_QUP=m
CONFIG_I2C_RIIC=m
CONFIG_I2C_RZV2M=m
CONFIG_I2C_S3C2410=m
CONFIG_I2C_SH_MOBILE=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_ST=m
CONFIG_I2C_STM32F4=m
CONFIG_I2C_STM32F7=m
CONFIG_I2C_SUN6I_P2WI=m
CONFIG_I2C_SYNQUACER=m
CONFIG_I2C_TEGRA=m
CONFIG_I2C_TEGRA_BPMP=m
CONFIG_I2C_UNIPHIER=m
CONFIG_I2C_UNIPHIER_F=m
CONFIG_I2C_VERSATILE=m
CONFIG_I2C_WMT=m
CONFIG_I2C_XILINX=m
CONFIG_I2C_XLP9XX=m
CONFIG_I2C_RCAR=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_DLN2=m
CONFIG_I2C_CP2615=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_FSI=m
CONFIG_I2C_VIRTIO=m
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE_TESTUNIT=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support

CONFIG_I3C=m
CONFIG_CDNS_I3C_MASTER=m
CONFIG_DW_I3C_MASTER=m
CONFIG_SVC_I3C_MASTER=m
CONFIG_MIPI_I3C_HCI=m
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_ALTERA_CORE=m
CONFIG_SPI_ALTERA_DFL=m
CONFIG_SPI_AR934X=m
CONFIG_SPI_ATH79=m
CONFIG_SPI_ARMADA_3700=m
CONFIG_SPI_ASPEED_SMC=m
CONFIG_SPI_ATMEL=m
CONFIG_SPI_AT91_USART=m
CONFIG_SPI_ATMEL_QUADSPI=m
CONFIG_SPI_AXI_SPI_ENGINE=m
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_BCM63XX=m
CONFIG_SPI_BCM63XX_HSSPI=m
CONFIG_SPI_BCM_QSPI=m
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
CONFIG_SPI_CADENCE_QUADSPI=m
CONFIG_SPI_CADENCE_XSPI=m
CONFIG_SPI_CLPS711X=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_MMIO=m
CONFIG_SPI_DW_BT1=m
CONFIG_SPI_DW_BT1_DIRMAP=y
CONFIG_SPI_DLN2=m
CONFIG_SPI_EP93XX=m
CONFIG_SPI_FSI=m
CONFIG_SPI_FSL_LPSPI=m
CONFIG_SPI_FSL_QUADSPI=m
CONFIG_SPI_GXP=m
CONFIG_SPI_HISI_KUNPENG=m
CONFIG_SPI_HISI_SFC_V3XX=m
CONFIG_SPI_NXP_FLEXSPI=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_IMG_SPFI=m
CONFIG_SPI_IMX=m
CONFIG_SPI_INGENIC=m
CONFIG_SPI_INTEL=m
CONFIG_SPI_INTEL_PLATFORM=m
CONFIG_SPI_JCORE=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_LP8841_RTC=m
CONFIG_SPI_FSL_LIB=m
CONFIG_SPI_FSL_SPI=m
CONFIG_SPI_FSL_DSPI=m
CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_MICROCHIP_CORE=m
CONFIG_SPI_MICROCHIP_CORE_QSPI=m
CONFIG_SPI_MT65XX=m
CONFIG_SPI_MT7621=m
CONFIG_SPI_MTK_NOR=m
CONFIG_SPI_MTK_SNFI=m
CONFIG_SPI_NPCM_FIU=m
CONFIG_SPI_NPCM_PSPI=m
CONFIG_SPI_LANTIQ_SSC=m
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_OMAP24XX=m
CONFIG_SPI_TI_QSPI=m
CONFIG_SPI_OMAP_100K=m
CONFIG_SPI_ORION=m
CONFIG_SPI_PIC32=m
CONFIG_SPI_PIC32_SQI=m
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_ROCKCHIP=m
CONFIG_SPI_RPCIF=m
CONFIG_SPI_RSPI=m
CONFIG_SPI_QUP=m
CONFIG_SPI_QCOM_GENI=m
CONFIG_SPI_S3C64XX=m
CONFIG_SPI_SC18IS602=m
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SH=m
CONFIG_SPI_SH_SCI=m
CONFIG_SPI_SH_HSPI=m
CONFIG_SPI_SIFIVE=m
CONFIG_SPI_SLAVE_MT27XX=m
CONFIG_SPI_SPRD=m
CONFIG_SPI_SPRD_ADI=m
CONFIG_SPI_STM32=m
CONFIG_SPI_STM32_QSPI=m
CONFIG_SPI_ST_SSC4=m
CONFIG_SPI_SUN4I=m
CONFIG_SPI_SUN6I=m
CONFIG_SPI_SUNPLUS_SP7021=m
CONFIG_SPI_SYNQUACER=m
CONFIG_SPI_MXIC=m
CONFIG_SPI_TEGRA210_QUAD=m
CONFIG_SPI_TEGRA114=m
CONFIG_SPI_TEGRA20_SFLASH=m
CONFIG_SPI_TEGRA20_SLINK=m
CONFIG_SPI_UNIPHIER=m
CONFIG_SPI_XCOMM=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_XLP=m
CONFIG_SPI_XTENSA_XTFPGA=m
CONFIG_SPI_ZYNQ_QSPI=m
CONFIG_SPI_ZYNQMP_GQSPI=m
CONFIG_SPI_AMD=m

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=m

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=m
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=m
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=m
CONFIG_SPMI_HISI3670=m
CONFIG_SPMI_MSM_PMIC_ARB=m
CONFIG_SPMI_MTK_PMIF=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=m
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_PTP_1588_CLOCK_OPTIONAL=m
CONFIG_PTP_1588_CLOCK_DTE=m
CONFIG_PTP_1588_CLOCK_QORIQ=m
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_INES=m
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AT91PIO4=y
CONFIG_PINCTRL_AXP209=m
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_CY8C95X0=m
CONFIG_PINCTRL_DA850_PUPD=m
CONFIG_PINCTRL_DA9062=m
CONFIG_PINCTRL_EQUILIBRIUM=m
CONFIG_PINCTRL_INGENIC=y
CONFIG_PINCTRL_LPC18XX=y
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
CONFIG_PINCTRL_MCP23S08=m
CONFIG_PINCTRL_MICROCHIP_SGPIO=m
CONFIG_PINCTRL_OCELOT=m
CONFIG_PINCTRL_PISTACHIO=y
CONFIG_PINCTRL_RK805=m
CONFIG_PINCTRL_ROCKCHIP=m
CONFIG_PINCTRL_SINGLE=m
CONFIG_PINCTRL_STMFX=m
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
CONFIG_PINCTRL_S700=y
CONFIG_PINCTRL_S900=y
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
CONFIG_PINCTRL_ASPEED_G6=y
CONFIG_PINCTRL_BCM281XX=y
CONFIG_PINCTRL_BCM2835=m
CONFIG_PINCTRL_BCM4908=m
CONFIG_PINCTRL_BCM63XX=y
CONFIG_PINCTRL_BCM6318=y
CONFIG_PINCTRL_BCM6328=y
CONFIG_PINCTRL_BCM6358=y
CONFIG_PINCTRL_BCM6362=y
CONFIG_PINCTRL_BCM6368=y
CONFIG_PINCTRL_BCM63268=y
CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_CYGNUS_MUX=y
CONFIG_PINCTRL_NS=y
CONFIG_PINCTRL_NSP_GPIO=y
CONFIG_PINCTRL_NS2_MUX=y
CONFIG_PINCTRL_NSP_MUX=y
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
CONFIG_PINCTRL_BERLIN_BG4CT=y
CONFIG_PINCTRL_MADERA=m
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_PINCTRL_IMX=m
CONFIG_PINCTRL_IMX8MM=m
CONFIG_PINCTRL_IMX8MN=m
CONFIG_PINCTRL_IMX8MP=m
CONFIG_PINCTRL_IMX8MQ=m

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MT8135=y
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
CONFIG_PINCTRL_MT6765=m
CONFIG_PINCTRL_MT6779=m
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_MT7986=y
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
CONFIG_PINCTRL_MT8183=y
CONFIG_PINCTRL_MT8186=y
CONFIG_PINCTRL_MT8188=y
CONFIG_PINCTRL_MT8192=y
CONFIG_PINCTRL_MT8195=y
CONFIG_PINCTRL_MT8365=y
CONFIG_PINCTRL_MT8516=y
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=m
CONFIG_PINCTRL_WPCM450=m
CONFIG_PINCTRL_NPCM7XX=y
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=m
CONFIG_PINCTRL_PXA27X=m
CONFIG_PINCTRL_MSM=m
CONFIG_PINCTRL_APQ8064=m
CONFIG_PINCTRL_APQ8084=m
CONFIG_PINCTRL_IPQ4019=m
CONFIG_PINCTRL_IPQ8064=m
CONFIG_PINCTRL_IPQ8074=m
CONFIG_PINCTRL_IPQ6018=m
CONFIG_PINCTRL_MSM8226=m
CONFIG_PINCTRL_MSM8660=m
CONFIG_PINCTRL_MSM8960=m
CONFIG_PINCTRL_MDM9607=m
CONFIG_PINCTRL_MDM9615=m
CONFIG_PINCTRL_MSM8X74=m
CONFIG_PINCTRL_MSM8909=m
CONFIG_PINCTRL_MSM8916=m
CONFIG_PINCTRL_MSM8953=m
CONFIG_PINCTRL_MSM8976=m
CONFIG_PINCTRL_MSM8994=m
CONFIG_PINCTRL_MSM8996=m
CONFIG_PINCTRL_MSM8998=m
CONFIG_PINCTRL_QCM2290=m
CONFIG_PINCTRL_QCS404=m
CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
CONFIG_PINCTRL_QCOM_SSBI_PMIC=m
CONFIG_PINCTRL_SC7180=m
CONFIG_PINCTRL_SC7280=m
CONFIG_PINCTRL_SC7280_LPASS_LPI=m
CONFIG_PINCTRL_SC8180X=m
CONFIG_PINCTRL_SC8280XP=m
CONFIG_PINCTRL_SDM660=m
CONFIG_PINCTRL_SDM845=m
CONFIG_PINCTRL_SDX55=m
CONFIG_PINCTRL_SM6115=m
CONFIG_PINCTRL_SM6125=m
CONFIG_PINCTRL_SM6350=m
CONFIG_PINCTRL_SM6375=m
CONFIG_PINCTRL_SDX65=m
CONFIG_PINCTRL_SM8150=m
CONFIG_PINCTRL_SM8250=m
CONFIG_PINCTRL_SM8250_LPASS_LPI=m
CONFIG_PINCTRL_SM8350=m
CONFIG_PINCTRL_SM8450=m
CONFIG_PINCTRL_SM8450_LPASS_LPI=m
CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
CONFIG_PINCTRL_LPASS_LPI=m

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A7779=y
CONFIG_PINCTRL_PFC_R8A7790=y
CONFIG_PINCTRL_PFC_R8A77950=y
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A7778=y
CONFIG_PINCTRL_PFC_R8A7793=y
CONFIG_PINCTRL_PFC_R8A7791=y
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A779F0=y
CONFIG_PINCTRL_PFC_R8A7792=y
CONFIG_PINCTRL_PFC_R8A77980=y
CONFIG_PINCTRL_PFC_R8A77970=y
CONFIG_PINCTRL_PFC_R8A779A0=y
CONFIG_PINCTRL_PFC_R8A779G0=y
CONFIG_PINCTRL_PFC_R8A7740=y
CONFIG_PINCTRL_PFC_R8A73A4=y
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_RZG2L=y
CONFIG_PINCTRL_PFC_R8A77470=y
CONFIG_PINCTRL_PFC_R8A7745=y
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
CONFIG_PINCTRL_PFC_R8A7744=y
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
CONFIG_PINCTRL_PFC_R8A774A1=y
CONFIG_PINCTRL_PFC_R8A774B1=y
CONFIG_PINCTRL_RZN1=y
CONFIG_PINCTRL_RZV2M=y
CONFIG_PINCTRL_PFC_SH7203=y
CONFIG_PINCTRL_PFC_SH7264=y
CONFIG_PINCTRL_PFC_SH7269=y
CONFIG_PINCTRL_PFC_SH7720=y
CONFIG_PINCTRL_PFC_SH7722=y
CONFIG_PINCTRL_PFC_SH7734=y
CONFIG_PINCTRL_PFC_SH7757=y
CONFIG_PINCTRL_PFC_SH7785=y
CONFIG_PINCTRL_PFC_SH7786=y
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
CONFIG_PINCTRL_PFC_SH7724=y
CONFIG_PINCTRL_PFC_SHX3=y
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM=y
CONFIG_PINCTRL_EXYNOS_ARM64=y
CONFIG_PINCTRL_S3C24XX=y
CONFIG_PINCTRL_S3C64XX=y
CONFIG_PINCTRL_SPRD=m
CONFIG_PINCTRL_SPRD_SC9860=m
CONFIG_PINCTRL_STARFIVE_JH7100=m
CONFIG_PINCTRL_STM32=y
CONFIG_PINCTRL_STM32F429=y
CONFIG_PINCTRL_STM32F469=y
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
CONFIG_PINCTRL_STM32H743=y
CONFIG_PINCTRL_STM32MP135=y
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=m
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
CONFIG_PINCTRL_UNIPHIER_SLD8=y
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
CONFIG_PINCTRL_UNIPHIER_LD11=y
CONFIG_PINCTRL_UNIPHIER_LD20=y
CONFIG_PINCTRL_UNIPHIER_PXS3=y
CONFIG_PINCTRL_UNIPHIER_NX1=y
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=m
CONFIG_GPIO_ALTERA=m
CONFIG_GPIO_ASPEED=m
CONFIG_GPIO_ASPEED_SGPIO=y
CONFIG_GPIO_ATH79=m
CONFIG_GPIO_RASPBERRYPI_EXP=m
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=m
CONFIG_GPIO_BRCMSTB=m
CONFIG_GPIO_CADENCE=m
CONFIG_GPIO_CLPS711X=m
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_EIC_SPRD=m
CONFIG_GPIO_EM=m
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_GRGPIO=m
CONFIG_GPIO_HISI=m
CONFIG_GPIO_HLWD=m
CONFIG_GPIO_IMX_SCU=y
CONFIG_GPIO_IOP=m
CONFIG_GPIO_LOGICVC=m
CONFIG_GPIO_LPC18XX=m
CONFIG_GPIO_LPC32XX=m
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_MPC8XXX=y
CONFIG_GPIO_MT7621=y
CONFIG_GPIO_MXC=m
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PMIC_EIC_SPRD=m
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=m
CONFIG_GPIO_RDA=y
CONFIG_GPIO_ROCKCHIP=m
CONFIG_GPIO_SAMA5D2_PIOBU=m
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=m
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=m
CONFIG_GPIO_TEGRA=m
CONFIG_GPIO_TEGRA186=m
CONFIG_GPIO_TS4800=m
CONFIG_GPIO_UNIPHIER=m
CONFIG_GPIO_VISCONTI=m
CONFIG_GPIO_WCD934X=m
CONFIG_GPIO_XGENE_SB=m
CONFIG_GPIO_XILINX=m
CONFIG_GPIO_XLP=m
CONFIG_GPIO_AMD_FCH=m
CONFIG_GPIO_IDT3243X=m
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=m
CONFIG_GPIO_GW_PLD=m
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_TPIC2810=m
CONFIG_GPIO_TS4900=m
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_DA9052=m
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
CONFIG_GPIO_LP87565=m
CONFIG_GPIO_MADERA=m
CONFIG_GPIO_MAX77650=m
CONFIG_GPIO_SL28CPLD=m
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65218=m
CONFIG_GPIO_TPS65912=m
CONFIG_GPIO_UCB1400=m
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=m
CONFIG_GPIO_MAX3191X=m
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_PISOSR=m
CONFIG_GPIO_XRA1403=m
CONFIG_GPIO_MOXTET=m
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=m
CONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers

CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_MXC=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_ATC260X=m
CONFIG_POWER_RESET_BRCMKONA=y
CONFIG_POWER_RESET_BRCMSTB=y
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_LINKSTATION=m
CONFIG_POWER_RESET_OCELOT_RESET=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_RESET_RMOBILE=m
CONFIG_REBOOT_MODE=m
CONFIG_SYSCON_REBOOT_MODE=m
CONFIG_POWER_RESET_SC27XX=m
CONFIG_NVMEM_REBOOT_MODE=m
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=m
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_IP5XXX_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_TEST_POWER=m
CONFIG_CHARGER_ADP5061=m
CONFIG_BATTERY_ACT8945A=m
CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_CW2015=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_LEGO_EV3=m
CONFIG_BATTERY_OLPC=m
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_INGENIC=m
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9052=m
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_CHARGER_AXP20X=m
CONFIG_BATTERY_AXP20X=m
CONFIG_AXP20X_POWER=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_BATTERY_MAX1721X=m
CONFIG_CHARGER_PCF50633=m
CONFIG_CHARGER_CPCAP=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=m
CONFIG_CHARGER_LT3651=m
CONFIG_CHARGER_LTC4162L=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_DETECTOR_MAX14656=m
CONFIG_CHARGER_MAX77650=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX77976=m
CONFIG_CHARGER_MP2629=m
CONFIG_CHARGER_MT6360=m
CONFIG_CHARGER_MT6370=m
CONFIG_CHARGER_QCOM_SMBB=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_BQ25980=m
CONFIG_CHARGER_BQ256XX=m
CONFIG_CHARGER_RK817=m
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65217=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_GOLDFISH=m
CONFIG_BATTERY_RT5033=m
CONFIG_CHARGER_RT9455=m
CONFIG_CHARGER_CROS_USBPD=m
CONFIG_CHARGER_CROS_PCHG=m
CONFIG_CHARGER_SC2731=m
CONFIG_FUEL_GAUGE_SC27XX=m
CONFIG_CHARGER_UCS1002=m
CONFIG_CHARGER_BD99954=m
CONFIG_RN5T618_POWER=m
CONFIG_BATTERY_ACER_A500=m
CONFIG_BATTERY_UG3105=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_AHT10=m
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=m
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_ARM_SCMI=m
CONFIG_SENSORS_ARM_SCPI=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_BT1_PVT=m
CONFIG_SENSORS_BT1_PVT_ALARMS=y
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_CORSAIR_PSU=m
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_SPARX5=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_GSC=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_LAN966X=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=m
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC2992=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX127=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX31760=m
CONFIG_SENSORS_MAX6620=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_MLXREG_FAN=m
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT6775_I2C=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_NPCM7XX=m
CONFIG_SENSORS_NSA320=m
CONFIG_SENSORS_NZXT_KRAKEN2=m
CONFIG_SENSORS_NZXT_SMART2=m
CONFIG_SENSORS_OCC_P8_I2C=m
CONFIG_SENSORS_OCC_P9_SBE=m
CONFIG_SENSORS_OCC=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_PECI_CPUTEMP=m
CONFIG_SENSORS_PECI_DIMMTEMP=m
CONFIG_SENSORS_PECI=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_BEL_PFE=m
CONFIG_SENSORS_BPA_RS600=m
CONFIG_SENSORS_DELTA_AHE50DC_FAN=m
CONFIG_SENSORS_FSP_3Y=m
CONFIG_SENSORS_IBM_CFFPS=m
CONFIG_SENSORS_DPS920AB=m
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=m
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
CONFIG_SENSORS_IR38064_REGULATOR=y
CONFIG_SENSORS_IRPS5401=m
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT7182S=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MP2888=m
CONFIG_SENSORS_MP2975=m
CONFIG_SENSORS_MP5023=m
CONFIG_SENSORS_PIM4328=m
CONFIG_SENSORS_PLI1209BC=m
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
CONFIG_SENSORS_PM6764TR=m
CONFIG_SENSORS_PXE1610=m
CONFIG_SENSORS_Q54SJ108A2=m
CONFIG_SENSORS_STPDDC60=m
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_TPS546D24=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_XDPE152=m
CONFIG_SENSORS_XDPE122=m
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
CONFIG_SENSORS_SL28CPLD=m
CONFIG_SENSORS_SBTSI=m
CONFIG_SENSORS_SBRMI=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHT4x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SY7636A=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC2305=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA238=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_TMP464=m
CONFIG_SENSORS_TMP513=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_FREQ_THERMAL=y
CONFIG_CPU_IDLE_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=m
CONFIG_HISI_THERMAL=m
CONFIG_IMX_THERMAL=m
CONFIG_IMX_SC_THERMAL=m
CONFIG_IMX8MM_THERMAL=m
CONFIG_K3_THERMAL=m
CONFIG_QORIQ_THERMAL=m
CONFIG_SPEAR_THERMAL=m
CONFIG_SUN8I_THERMAL=m
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_RCAR_THERMAL=m
CONFIG_RCAR_GEN3_THERMAL=m
CONFIG_RZG2L_THERMAL=m
CONFIG_KIRKWOOD_THERMAL=m
CONFIG_DOVE_THERMAL=m
CONFIG_ARMADA_THERMAL=m
CONFIG_DA9062_THERMAL=m
CONFIG_MTK_THERMAL=m

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=m
CONFIG_BCM2835_THERMAL=m
CONFIG_BRCMSTB_THERMAL=m
CONFIG_BCM_NS_THERMAL=m
CONFIG_BCM_SR_THERMAL=m
# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=m
CONFIG_TI_THERMAL=y
CONFIG_OMAP3_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=m
# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=m
CONFIG_TEGRA_BPMP_THERMAL=m
CONFIG_TEGRA30_TSENSOR=m
# end of NVIDIA Tegra thermal drivers

CONFIG_GENERIC_ADC_THERMAL=m

#
# Qualcomm thermal drivers
#
CONFIG_QCOM_TSENS=m
CONFIG_QCOM_SPMI_ADC_TM5=m
CONFIG_QCOM_SPMI_TEMP_ALARM=m
# end of Qualcomm thermal drivers

CONFIG_UNIPHIER_THERMAL=m
CONFIG_SPRD_THERMAL=m
CONFIG_KHADAS_MCU_FAN_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=m
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_DA9052_WATCHDOG=m
CONFIG_DA9055_WATCHDOG=m
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
CONFIG_GPIO_WATCHDOG=m
CONFIG_MENF21BMC_WATCHDOG=m
CONFIG_MENZ069_WATCHDOG=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_RAVE_SP_WATCHDOG=m
CONFIG_MLX_WDT=m
CONFIG_SL28CPLD_WATCHDOG=m
CONFIG_ARMADA_37XX_WATCHDOG=m
CONFIG_ASM9260_WATCHDOG=m
CONFIG_AT91RM9200_WATCHDOG=m
CONFIG_AT91SAM9X_WATCHDOG=m
CONFIG_SAMA5D4_WATCHDOG=m
CONFIG_CADENCE_WATCHDOG=m
CONFIG_FTWDT010_WATCHDOG=m
CONFIG_S3C2410_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
CONFIG_EP93XX_WATCHDOG=m
CONFIG_OMAP_WATCHDOG=m
CONFIG_PNX4008_WATCHDOG=m
CONFIG_DAVINCI_WATCHDOG=m
CONFIG_K3_RTI_WATCHDOG=m
CONFIG_RN5T618_WATCHDOG=m
CONFIG_SUNXI_WATCHDOG=m
CONFIG_NPCM7XX_WATCHDOG=m
CONFIG_STMP3XXX_RTC_WATCHDOG=m
CONFIG_TS4800_WATCHDOG=m
CONFIG_TS72XX_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
CONFIG_MAX77620_WATCHDOG=m
CONFIG_IMX2_WDT=m
CONFIG_IMX7ULP_WDT=m
CONFIG_RETU_WATCHDOG=m
CONFIG_MOXART_WDT=m
CONFIG_ST_LPC_WATCHDOG=m
CONFIG_TEGRA_WATCHDOG=m
CONFIG_QCOM_WDT=m
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
CONFIG_MEDIATEK_WATCHDOG=m
CONFIG_DIGICOLOR_WATCHDOG=m
CONFIG_LPC18XX_WATCHDOG=m
CONFIG_RENESAS_WDT=m
CONFIG_RENESAS_RZAWDT=m
CONFIG_RENESAS_RZN1WDT=m
CONFIG_RENESAS_RZG2LWDT=m
CONFIG_ASPEED_WATCHDOG=m
CONFIG_UNIPHIER_WATCHDOG=m
CONFIG_RTD119X_WATCHDOG=y
CONFIG_SPRD_WATCHDOG=m
CONFIG_PM8916_WATCHDOG=m
CONFIG_VISCONTI_WATCHDOG=m
CONFIG_MSC313E_WATCHDOG=m
CONFIG_APPLE_WATCHDOG=m
CONFIG_SUNPLUS_WATCHDOG=m
CONFIG_SC520_WDT=m
CONFIG_KEMPLD_WDT=m
CONFIG_BCM47XX_WDT=m
CONFIG_BCM2835_WDT=m
CONFIG_BCM_KONA_WDT=m
CONFIG_BCM_KONA_WDT_DEBUG=y
CONFIG_BCM7038_WDT=m
CONFIG_IMGPDC_WDT=m
CONFIG_MPC5200_WDT=y
CONFIG_MEN_A21_WDT=m
CONFIG_SH_WDT=m
CONFIG_UML_WATCHDOG=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=m
CONFIG_MFD_SUN4I_GPADC=m
CONFIG_MFD_AT91_USART=m
CONFIG_MFD_ATMEL_FLEXCOM=m
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_CROS_EC_DEV=m
CONFIG_MFD_MADERA=m
CONFIG_MFD_MADERA_I2C=m
CONFIG_MFD_MADERA_SPI=m
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
CONFIG_MFD_ASIC3=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9062=m
CONFIG_MFD_DA9063=m
CONFIG_MFD_DA9150=m
CONFIG_MFD_DLN2=m
CONFIG_MFD_ENE_KB3930=m
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_GATEWORKS_GSC=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=m
CONFIG_MFD_MXS_LRADC=m
CONFIG_MFD_MX25_TSADC=m
CONFIG_MFD_HI6421_PMIC=m
CONFIG_MFD_HI6421_SPMI=m
CONFIG_MFD_HI655X_PMIC=m
CONFIG_HTC_PASIC3=m
CONFIG_MFD_IQS62X=m
CONFIG_MFD_KEMPLD=m
CONFIG_MFD_88PM800=m
CONFIG_MFD_88PM805=m
CONFIG_MFD_MAX14577=m
CONFIG_MFD_MAX77650=m
CONFIG_MFD_MAX77686=m
CONFIG_MFD_MAX77693=m
CONFIG_MFD_MAX77714=m
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MT6360=m
CONFIG_MFD_MT6370=m
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_OCELOT=m
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=m
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_NTXEC=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_UCB1400_CORE=m
CONFIG_MFD_PM8XXX=m
CONFIG_MFD_SPMI_PMIC=m
CONFIG_MFD_SY7636A=m
CONFIG_MFD_RT4831=m
CONFIG_MFD_RT5033=m
CONFIG_MFD_RT5120=m
CONFIG_MFD_RK808=m
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SIMPLE_MFD_I2C=m
CONFIG_MFD_SL28CPLD=m
CONFIG_MFD_SKY81452=m
CONFIG_MFD_SC27XX_PMIC=m
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers

CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
CONFIG_MFD_TI_LMU=m
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TI_LP87565=m
CONFIG_MFD_TPS65218=m
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
CONFIG_MFD_TPS65912_SPI=m
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
CONFIG_MFD_TQMX86=m
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_ARIZONA_SPI=m
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8994=m
CONFIG_MFD_STW481X=m
CONFIG_MFD_STM32_LPTIMER=m
CONFIG_MFD_STM32_TIMERS=m
CONFIG_MFD_STMFX=m
CONFIG_MFD_WCD934X=m
CONFIG_MFD_ATC260X=m
CONFIG_MFD_ATC260X_I2C=m
CONFIG_MFD_KHADAS_MCU=m
CONFIG_MFD_ACER_A500_EC=m
CONFIG_MFD_QCOM_PM8008=m
CONFIG_RAVE_SP_CORE=m
CONFIG_MFD_INTEL_M10_BMC=m
CONFIG_MFD_RSMU_I2C=m
CONFIG_MFD_RSMU_SPI=m
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_ACT8945A=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_ARM_SCMI=m
CONFIG_REGULATOR_ATC260X=m
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_CPCAP=m
CONFIG_REGULATOR_CROS_EC=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9062=m
CONFIG_REGULATOR_DA9063=m
CONFIG_REGULATOR_DA9121=m
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_FAN53880=m
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_HI6421=m
CONFIG_REGULATOR_HI6421V530=m
CONFIG_REGULATOR_HI655X=m
CONFIG_REGULATOR_HI6421V600=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP873X=m
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LP87565=m
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX14577=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX77620=m
CONFIG_REGULATOR_MAX77650=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8893=m
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=m
CONFIG_REGULATOR_MAX20086=m
CONFIG_REGULATOR_MAX77686=m
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MAX77826=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MCP16502=m
CONFIG_REGULATOR_MP5416=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MP886X=m
CONFIG_REGULATOR_MPQ7920=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6315=m
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6331=m
CONFIG_REGULATOR_MT6332=m
CONFIG_REGULATOR_MT6358=m
CONFIG_REGULATOR_MT6359=m
CONFIG_REGULATOR_MT6360=m
CONFIG_REGULATOR_MT6370=m
CONFIG_REGULATOR_MT6380=m
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PBIAS=m
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PCAP=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PF8X00=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_QCOM_RPMH=m
CONFIG_REGULATOR_QCOM_SMD_RPM=m
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_QCOM_USB_VBUS=m
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT4831=m
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_RT5120=m
CONFIG_REGULATOR_RT5190A=m
CONFIG_REGULATOR_RT5759=m
CONFIG_REGULATOR_RT6160=m
CONFIG_REGULATOR_RT6245=m
CONFIG_REGULATOR_RTQ2134=m
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_RTQ6752=m
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_SC2731=m
CONFIG_REGULATOR_SKY81452=m
CONFIG_REGULATOR_SLG51000=m
CONFIG_REGULATOR_STM32_BOOSTER=m
CONFIG_REGULATOR_STM32_VREFBUF=m
CONFIG_REGULATOR_STM32_PWR=y
CONFIG_REGULATOR_TI_ABB=m
CONFIG_REGULATOR_STW481X_VMMC=y
CONFIG_REGULATOR_SY7636A=m
CONFIG_REGULATOR_SY8106A=m
CONFIG_REGULATOR_SY8824X=m
CONFIG_REGULATOR_SY8827N=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS6286X=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65086=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS65218=m
CONFIG_REGULATOR_TPS6524X=m
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TPS68470=m
CONFIG_REGULATOR_UNIPHIER=m
CONFIG_REGULATOR_VCTRL=m
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8994=m
CONFIG_REGULATOR_QCOM_LABIBB=m
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_RCMM_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_IR_GPIO_TX=m
CONFIG_IR_HIX5HD2=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_IMON=m
CONFIG_IR_IMON_RAW=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_MESON=m
CONFIG_IR_MESON_TX=m
CONFIG_IR_MTK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_PWM_TX=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_RX51=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SPI=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_SUNXI=m
CONFIG_IR_TOY=m
CONFIG_IR_TTUSBIR=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_LOOPBACK=m
CONFIG_RC_ST=m
CONFIG_RC_XBOX_DVD=m
CONFIG_IR_IMG=m
CONFIG_IR_IMG_RAW=y
CONFIG_IR_IMG_HW=y
CONFIG_IR_IMG_NEC=y
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
CONFIG_IR_IMG_SANYO=y
CONFIG_IR_IMG_RC5=y
CONFIG_IR_IMG_RC6=y
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_CROS_EC=m
CONFIG_CEC_MESON_AO=m
CONFIG_CEC_GPIO=m
CONFIG_CEC_SAMSUNG_S5P=m
CONFIG_CEC_STI=m
CONFIG_CEC_STM32=m
CONFIG_CEC_TEGRA=m
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
# end of CEC support

CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_JPEG_HELPER=m
CONFIG_V4L2_H264=m
CONFIG_V4L2_VP9=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FLASH_LED_CLASS=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DMA_CONTIG=m
# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options

#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_GSPCA=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_GL860=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_PWC=m
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y

#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_AS102=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_VP7045=m

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_USB_MSI2500=m
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_RADIO_SI4713=m
CONFIG_RADIO_SI476X=m
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
CONFIG_USB_DSBR=m
CONFIG_USB_KEENE=m
CONFIG_USB_MA901=m
CONFIG_USB_MR800=m
CONFIG_USB_RAREMONO=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_WL128X=m
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_CADET=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_ISA=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_ZOLTRIX=m
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MUX=m

#
# Allegro DVT media platform drivers
#
CONFIG_VIDEO_ALLEGRO_DVT=m

#
# Amlogic media platform drivers
#
CONFIG_VIDEO_MESON_GE2D=m

#
# Amphion drivers
#
CONFIG_VIDEO_AMPHION_VPU=m

#
# Aspeed media platform drivers
#
CONFIG_VIDEO_ASPEED=m

#
# Atmel media platform drivers
#
CONFIG_VIDEO_ATMEL_ISI=m

#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_VIDEO_CADENCE_CSI2TX=m

#
# Chips&Media media platform drivers
#
CONFIG_VIDEO_CODA=m
CONFIG_VIDEO_IMX_VDOA=m

#
# Intel media platform drivers
#
CONFIG_VIDEO_PXA27x=m

#
# Marvell media platform drivers
#

#
# Mediatek media platform drivers
#
CONFIG_VIDEO_MEDIATEK_JPEG=m
CONFIG_VIDEO_MEDIATEK_MDP=m
CONFIG_VIDEO_MEDIATEK_VCODEC_VPU=y
CONFIG_VIDEO_MEDIATEK_VCODEC=m
CONFIG_VIDEO_MEDIATEK_VPU=m

#
# NVidia media platform drivers
#
CONFIG_VIDEO_TEGRA_VDE=m

#
# NXP media platform drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=m
CONFIG_VIDEO_IMX_PXP=m
CONFIG_VIDEO_MX2_EMMAPRP=m
CONFIG_VIDEO_DW100=m
CONFIG_VIDEO_IMX8_JPEG=m

#
# Qualcomm media platform drivers
#
CONFIG_VIDEO_QCOM_CAMSS=m
CONFIG_VIDEO_QCOM_VENUS=m

#
# Renesas media platform drivers
#
CONFIG_VIDEO_RENESAS_CEU=m
CONFIG_VIDEO_RCAR_ISP=m
CONFIG_VIDEO_SH_VOU=m
CONFIG_VIDEO_RCAR_CSI2=m
CONFIG_VIDEO_RCAR_VIN=m
CONFIG_VIDEO_RENESAS_FCP=m
CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_JPU=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_VIDEO_RCAR_DRIF=m

#
# Rockchip media platform drivers
#
CONFIG_VIDEO_ROCKCHIP_RGA=m
CONFIG_VIDEO_ROCKCHIP_ISP1=m

#
# Samsung media platform drivers
#
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_VIDEO_S3C_CAMIF=m
CONFIG_VIDEO_SAMSUNG_S5P_G2D=m
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m

#
# STMicroelectronics media platform drivers
#
CONFIG_VIDEO_STI_BDISP=m
CONFIG_DVB_C8SECTPFE=m
CONFIG_VIDEO_STI_DELTA=m
CONFIG_VIDEO_STI_DELTA_MJPEG=y
CONFIG_VIDEO_STI_DELTA_DRIVER=m
CONFIG_VIDEO_STI_HVA=m
CONFIG_VIDEO_STI_HVA_DEBUGFS=y
CONFIG_VIDEO_STM32_DCMI=m
CONFIG_VIDEO_STM32_DMA2D=m

#
# Sunxi media platform drivers
#

#
# Texas Instruments drivers
#
CONFIG_VIDEO_TI_VPDMA=m
CONFIG_VIDEO_TI_SC=m
CONFIG_VIDEO_TI_CSC=m
CONFIG_VIDEO_TI_CAL=m
CONFIG_VIDEO_TI_CAL_MC=y
CONFIG_VIDEO_TI_VPE=m
CONFIG_VIDEO_TI_VPE_DEBUG=y
CONFIG_VIDEO_AM437X_VPFE=m
CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=m
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m
CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY=m

#
# Verisilicon media platform drivers
#
CONFIG_VIDEO_HANTRO=m
CONFIG_VIDEO_HANTRO_IMX8M=y
CONFIG_VIDEO_HANTRO_SAMA5D4=y
CONFIG_VIDEO_HANTRO_ROCKCHIP=y
CONFIG_VIDEO_HANTRO_SUNXI=y

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=m
CONFIG_VIDEO_VICODEC=m
CONFIG_VIDEO_VIMC=m
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=m

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_V4L2_TPG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m

#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=m
CONFIG_VIDEO_CCS_PLL=m
CONFIG_VIDEO_AR0521=m
CONFIG_VIDEO_HI556=m
CONFIG_VIDEO_HI846=m
CONFIG_VIDEO_HI847=m
CONFIG_VIDEO_IMX208=m
CONFIG_VIDEO_IMX214=m
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_IMX258=m
CONFIG_VIDEO_IMX274=m
CONFIG_VIDEO_IMX290=m
CONFIG_VIDEO_IMX319=m
CONFIG_VIDEO_IMX334=m
CONFIG_VIDEO_IMX335=m
CONFIG_VIDEO_IMX355=m
CONFIG_VIDEO_IMX412=m
CONFIG_VIDEO_MAX9271_LIB=m
CONFIG_VIDEO_MT9M001=m
CONFIG_VIDEO_MT9M032=m
CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9P031=m
CONFIG_VIDEO_MT9T001=m
CONFIG_VIDEO_MT9T112=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_MT9V111=m
CONFIG_VIDEO_NOON010PC30=m
CONFIG_VIDEO_OG01A1B=m
CONFIG_VIDEO_OV02A10=m
CONFIG_VIDEO_OV08D10=m
CONFIG_VIDEO_OV13858=m
CONFIG_VIDEO_OV13B10=m
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV2659=m
CONFIG_VIDEO_OV2680=m
CONFIG_VIDEO_OV2685=m
CONFIG_VIDEO_OV2740=m
CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV5645=m
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV5648=m
CONFIG_VIDEO_OV5670=m
CONFIG_VIDEO_OV5675=m
CONFIG_VIDEO_OV5693=m
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV6650=m
CONFIG_VIDEO_OV7251=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV772X=m
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_OV8856=m
CONFIG_VIDEO_OV8865=m
CONFIG_VIDEO_OV9282=m
CONFIG_VIDEO_OV9640=m
CONFIG_VIDEO_OV9650=m
CONFIG_VIDEO_OV9734=m
CONFIG_VIDEO_RDACM20=m
CONFIG_VIDEO_RDACM21=m
CONFIG_VIDEO_RJ54N1=m
CONFIG_VIDEO_S5C73M3=m
CONFIG_VIDEO_S5K4ECGX=m
CONFIG_VIDEO_S5K5BAF=m
CONFIG_VIDEO_S5K6A3=m
CONFIG_VIDEO_S5K6AA=m
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_VS6624=m
CONFIG_VIDEO_CCS=m
CONFIG_VIDEO_ET8EK8=m
CONFIG_VIDEO_M5MOLS=m
# end of Camera sensor devices

#
# Lens drivers
#
CONFIG_VIDEO_AD5820=m
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=m
CONFIG_VIDEO_DW9768=m
CONFIG_VIDEO_DW9807_VCM=m
# end of Lens drivers

#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=m
CONFIG_VIDEO_LM3646=m
# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA1997X=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV748X=m
CONFIG_VIDEO_ADV7604=m
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=m
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_ISL7998X=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_MAX9286=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_ADV7511=m
CONFIG_VIDEO_ADV7511_CEC=y
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_THS8200=m
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_ST_MIPID02=m
CONFIG_VIDEO_THS7303=m
# end of Miscellaneous helper chips

#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
CONFIG_VIDEO_GS1662=m
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_L64781=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_CXD2880=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=m
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_IMX_IPUV3_CORE=m
CONFIG_DRM_DEBUG_MODESET_LOCK=y

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_BACKLIGHT=m
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CLPS711X=m
CONFIG_FB_IMX=m
CONFIG_FB_ARC=m
CONFIG_FB_UVESA=m
CONFIG_FB_PVR2=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_ATMEL=m
CONFIG_FB_PXA168=m
CONFIG_FB_W100=m
CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_S3C=m
CONFIG_FB_S3C_DEBUG_REGWRITE=y
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=m
CONFIG_FB_GOLDFISH=m
CONFIG_FB_DA8XX=m
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
CONFIG_FB_BROADSHEET=m
CONFIG_FB_SIMPLE=m
CONFIG_FB_SSD1307=m
CONFIG_FB_OMAP2=m
CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
CONFIG_FB_OMAP2_NUM_FBS=3
CONFIG_FB_OMAP2_DSS_INIT=y
CONFIG_FB_OMAP2_DSS=m
CONFIG_FB_OMAP2_DSS_DEBUG=y
CONFIG_FB_OMAP2_DSS_DEBUGFS=y
CONFIG_FB_OMAP2_DSS_COLLECT_IRQ_STATS=y
CONFIG_FB_OMAP2_DSS_DPI=y
CONFIG_FB_OMAP2_DSS_VENC=y
CONFIG_FB_OMAP2_DSS_HDMI_COMMON=y
CONFIG_FB_OMAP4_DSS_HDMI=y
CONFIG_FB_OMAP5_DSS_HDMI=y
CONFIG_FB_OMAP2_DSS_SDI=y
CONFIG_FB_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y

#
# OMAPFB Panel and Encoder Drivers
#
CONFIG_FB_OMAP2_ENCODER_OPA362=m
CONFIG_FB_OMAP2_ENCODER_TFP410=m
CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
CONFIG_FB_OMAP2_CONNECTOR_DVI=m
CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
CONFIG_FB_OMAP2_PANEL_DPI=m
CONFIG_FB_OMAP2_PANEL_DSI_CM=m
CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
# end of OMAPFB Panel and Encoder Drivers

CONFIG_MMP_DISP=m
CONFIG_MMP_DISP_CONTROLLER=y
CONFIG_MMP_DISP_SPI=y
CONFIG_MMP_PANEL_TPOHVGA=y
CONFIG_MMP_FB=m
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_HX8357=m
CONFIG_LCD_OTM3225A=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_ATMEL_LCDC=y
CONFIG_BACKLIGHT_KTD253=m
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_OMAP1=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_MT6370=m
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_RT4831=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_TPS65217=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_BACKLIGHT_RAVE_SP=m
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support

CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# end of Console display driver support

CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_SUPERH_MONO=y
CONFIG_LOGO_SUPERH_VGA16=y
CONFIG_LOGO_SUPERH_CLUT224=y
# end of Graphics support

CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_CTL_DEBUG=y
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_SERIAL_GENERIC=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CS8409=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# end of HD-Audio

CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_PXA2XX_LIB=m
CONFIG_SND_SPI=y
CONFIG_SND_AT73C213=m
CONFIG_SND_AT73C213_TARGET_BITRATE=48000
CONFIG_SND_SUPERH=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_FIREWIRE_MOTU=m
CONFIG_SND_FIREFACE=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_TOPOLOGY_KUNIT_TEST=m
CONFIG_SND_SOC_UTILS_KUNIT_TEST=m
CONFIG_SND_SOC_ADI=m
CONFIG_SND_SOC_ADI_AXI_I2S=m
CONFIG_SND_SOC_ADI_AXI_SPDIF=m
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
CONFIG_SND_AMD_ACP_CONFIG=m
CONFIG_SND_SOC_APPLE_MCA=m
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_ATMEL_SOC_PDC=y
CONFIG_SND_ATMEL_SOC_DMA=y
CONFIG_SND_ATMEL_SOC_SSC=m
CONFIG_SND_ATMEL_SOC_SSC_PDC=m
CONFIG_SND_ATMEL_SOC_SSC_DMA=m
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=m
CONFIG_SND_ATMEL_SOC_WM8904=m
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=m
CONFIG_SND_ATMEL_SOC_CLASSD=m
CONFIG_SND_ATMEL_SOC_PDMIC=m
CONFIG_SND_ATMEL_SOC_I2S=m
CONFIG_SND_SOC_MIKROE_PROTO=m
CONFIG_SND_MCHP_SOC_I2S_MCC=m
CONFIG_SND_MCHP_SOC_SPDIFTX=m
CONFIG_SND_MCHP_SOC_PDMC=m
CONFIG_SND_BCM2835_SOC_I2S=m
CONFIG_SND_SOC_CYGNUS=m
CONFIG_SND_BCM63XX_I2S_WHISTLER=m
CONFIG_SND_EP93XX_SOC=m
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=y

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_MQS=m
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
CONFIG_SND_SOC_FSL_MICFIL=m
CONFIG_SND_SOC_FSL_XCVR=m
CONFIG_SND_SOC_FSL_AUD2HTX=m
CONFIG_SND_SOC_FSL_UTILS=m
CONFIG_SND_SOC_IMX_PCM_DMA=m
CONFIG_SND_SOC_IMX_AUDIO_RPMSG=m
CONFIG_SND_SOC_IMX_PCM_RPMSG=m
CONFIG_SND_SOC_IMX_AUDMUX=m
CONFIG_SND_IMX_SOC=m

#
# SoC Audio support for Freescale i.MX boards:
#
CONFIG_SND_SOC_IMX_ES8328=m
CONFIG_SND_SOC_IMX_SGTL5000=m
CONFIG_SND_SOC_IMX_SPDIF=m
CONFIG_SND_SOC_FSL_ASOC_CARD=m
CONFIG_SND_SOC_IMX_AUDMIX=m
CONFIG_SND_SOC_IMX_HDMI=m
CONFIG_SND_SOC_IMX_RPMSG=m
CONFIG_SND_SOC_IMX_CARD=m
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=m
CONFIG_SND_JZ4740_SOC_I2S=m
CONFIG_SND_KIRKWOOD_SOC=m
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=m
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=m
CONFIG_SND_SOC_IMG_I2S_OUT=m
CONFIG_SND_SOC_IMG_PARALLEL_OUT=m
CONFIG_SND_SOC_IMG_SPDIF_IN=m
CONFIG_SND_SOC_IMG_SPDIF_OUT=m
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_MTK_BTCVSD=m
CONFIG_SND_PXA2XX_SOC=m
CONFIG_SND_SOC_QCOM=m
CONFIG_SND_SOC_LPASS_CPU=m
CONFIG_SND_SOC_LPASS_HDMI=m
CONFIG_SND_SOC_LPASS_PLATFORM=m
CONFIG_SND_SOC_LPASS_CDC_DMA=m
CONFIG_SND_SOC_LPASS_IPQ806X=m
CONFIG_SND_SOC_LPASS_APQ8016=m
CONFIG_SND_SOC_LPASS_SC7180=m
CONFIG_SND_SOC_LPASS_SC7280=m
CONFIG_SND_SOC_STORM=m
CONFIG_SND_SOC_APQ8016_SBC=m
CONFIG_SND_SOC_QCOM_COMMON=m
CONFIG_SND_SOC_SC7180=m
CONFIG_SND_SOC_SC7280=m
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_I2S=m
CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=m
CONFIG_SND_SOC_ROCKCHIP_PDM=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
CONFIG_SND_SOC_RK3288_HDMI_ANALOG=m
CONFIG_SND_SOC_RK3399_GRU_SOUND=m

#
# SoC Audio support for Renesas SoCs
#
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RZ=m
# end of SoC Audio support for Renesas SoCs

CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_ACPI=m
CONFIG_SND_SOC_SOF_ACPI_DEV=m
CONFIG_SND_SOC_SOF_OF=m
CONFIG_SND_SOC_SOF_OF_DEV=m
CONFIG_SND_SOC_SOF_COMPRESS=y
CONFIG_SND_SOC_SOF_CLIENT=m
CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT=y
CONFIG_SND_SOC_SOF_FORCE_PROBE_WORKQUEUE=y
CONFIG_SND_SOC_SOF_NOCODEC=m
CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT=y
CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS=y
CONFIG_SND_SOC_SOF_DEBUG=y
CONFIG_SND_SOC_SOF_FORCE_NOCODEC_MODE=y
CONFIG_SND_SOC_SOF_DEBUG_XRUN_STOP=y
CONFIG_SND_SOC_SOF_DEBUG_VERBOSE_IPC=y
CONFIG_SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST=m
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST_NUM=2
CONFIG_SND_SOC_SOF_DEBUG_IPC_MSG_INJECTOR=m
CONFIG_SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT=y
CONFIG_SND_SOC_SOF=m
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=m
CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
CONFIG_SND_SOC_SOF_IMX_COMMON=m
CONFIG_SND_SOC_SOF_IMX8=m
CONFIG_SND_SOC_SOF_IMX8M=m
CONFIG_SND_SOC_SOF_IMX8ULP=m
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=m
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=m
CONFIG_SND_SOC_SOF_INTEL_COMMON=m
CONFIG_SND_SOC_SOF_BAYTRAIL=m
CONFIG_SND_SOC_SOF_BROADWELL=m
CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y
CONFIG_SND_SOC_SOF_MTK_COMMON=m
CONFIG_SND_SOC_SOF_MT8186=m
CONFIG_SND_SOC_SOF_MT8195=m
CONFIG_SND_SOC_SOF_XTENSA=m
CONFIG_SND_SOC_SPRD=m
CONFIG_SND_SOC_SPRD_MCDT=m
CONFIG_SND_SOC_STI=m

#
# STMicroelectronics STM32 SOC audio support
#
CONFIG_SND_SOC_STM32_SPDIFRX=m
CONFIG_SND_SOC_STM32_DFSDM=m
# end of STMicroelectronics STM32 SOC audio support

#
# Allwinner SoC Audio support
#
CONFIG_SND_SUN4I_CODEC=m
CONFIG_SND_SUN8I_CODEC_ANALOG=m
CONFIG_SND_SUN50I_CODEC_ANALOG=m
CONFIG_SND_SUN4I_I2S=m
CONFIG_SND_SUN4I_SPDIF=m
CONFIG_SND_SUN50I_DMIC=m
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=m
# end of Allwinner SoC Audio support

#
# Audio support for Texas Instruments SoCs
#
CONFIG_SND_SOC_TI_EDMA_PCM=m
CONFIG_SND_SOC_TI_SDMA_PCM=m

#
# Texas Instruments DAI support for:
#
CONFIG_SND_SOC_DAVINCI_ASP=m
CONFIG_SND_SOC_DAVINCI_VCIF=m
CONFIG_SND_SOC_OMAP_MCPDM=m

#
# Audio support for boards with Texas Instruments SoCs
#
CONFIG_SND_SOC_OMAP_HDMI=m
# end of Audio support for Texas Instruments SoCs

CONFIG_SND_SOC_UNIPHIER=m
CONFIG_SND_SOC_UNIPHIER_AIO=m
CONFIG_SND_SOC_UNIPHIER_LD11=m
CONFIG_SND_SOC_UNIPHIER_PXS2=m
CONFIG_SND_SOC_UNIPHIER_EVEA_CODEC=m
CONFIG_SND_SOC_XILINX_I2S=m
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m
CONFIG_SND_SOC_XILINX_SPDIF=m
CONFIG_SND_SOC_XTFPGA_I2S=m
CONFIG_SND_SOC_I2C_AND_SPI=m

#
# CODEC drivers
#
CONFIG_SND_SOC_ALL_CODECS=m
# CONFIG_SND_SOC_88PM860X is not set
CONFIG_SND_SOC_ARIZONA=m
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_WM_ADSP=m
CONFIG_SND_SOC_AB8500_CODEC=m
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_AD1836=m
CONFIG_SND_SOC_AD193X=m
CONFIG_SND_SOC_AD193X_SPI=m
CONFIG_SND_SOC_AD193X_I2C=m
CONFIG_SND_SOC_AD1980=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_ADAU_UTILS=m
CONFIG_SND_SOC_ADAU1372=m
CONFIG_SND_SOC_ADAU1372_I2C=m
CONFIG_SND_SOC_ADAU1372_SPI=m
CONFIG_SND_SOC_ADAU1373=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
CONFIG_SND_SOC_ADAU1781=m
CONFIG_SND_SOC_ADAU1781_I2C=m
CONFIG_SND_SOC_ADAU1781_SPI=m
CONFIG_SND_SOC_ADAU1977=m
CONFIG_SND_SOC_ADAU1977_SPI=m
CONFIG_SND_SOC_ADAU1977_I2C=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_ADAV80X=m
CONFIG_SND_SOC_ADAV801=m
CONFIG_SND_SOC_ADAV803=m
CONFIG_SND_SOC_ADS117X=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4118=m
CONFIG_SND_SOC_AK4375=m
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4641=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK4671=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_ALC5632=m
CONFIG_SND_SOC_AW8738=m
CONFIG_SND_SOC_BD28623=m
CONFIG_SND_SOC_BT_SCO=m
CONFIG_SND_SOC_CPCAP=m
CONFIG_SND_SOC_CQ0093VC=m
CONFIG_SND_SOC_CROS_EC_CODEC=m
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS35L41_LIB=m
CONFIG_SND_SOC_CS35L41=m
CONFIG_SND_SOC_CS35L41_SPI=m
CONFIG_SND_SOC_CS35L41_I2C=m
CONFIG_SND_SOC_CS35L45_TABLES=m
CONFIG_SND_SOC_CS35L45=m
CONFIG_SND_SOC_CS35L45_SPI=m
CONFIG_SND_SOC_CS35L45_I2C=m
CONFIG_SND_SOC_CS42L42_CORE=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS42L83=m
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS47L15=m
CONFIG_SND_SOC_CS47L24=m
CONFIG_SND_SOC_CS47L35=m
CONFIG_SND_SOC_CS47L85=m
CONFIG_SND_SOC_CS47L90=m
CONFIG_SND_SOC_CS47L92=m
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_CX20442=m
CONFIG_SND_SOC_CX2072X=m
CONFIG_SND_SOC_JZ4740_CODEC=m
CONFIG_SND_SOC_JZ4725B_CODEC=m
CONFIG_SND_SOC_JZ4760_CODEC=m
CONFIG_SND_SOC_JZ4770_CODEC=m
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_DA7210=m
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7218=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DA732X=m
CONFIG_SND_SOC_DA9055=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8326=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_HDAC_HDMI=m
CONFIG_SND_SOC_HDAC_HDA=m
CONFIG_SND_SOC_HDA=m
CONFIG_SND_SOC_ICS43432=m
CONFIG_SND_SOC_INNO_RK3036=m
CONFIG_SND_SOC_ISABELLE=m
CONFIG_SND_SOC_LM49453=m
CONFIG_SND_SOC_LOCHNAGAR_SC=m
CONFIG_SND_SOC_MADERA=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98095=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98371=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
CONFIG_SND_SOC_MAX98925=m
CONFIG_SND_SOC_MAX98926=m
CONFIG_SND_SOC_MAX98927=m
CONFIG_SND_SOC_MAX98520=m
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
CONFIG_SND_SOC_MAX98373_SDW=m
CONFIG_SND_SOC_MAX98390=m
CONFIG_SND_SOC_MAX98396=m
CONFIG_SND_SOC_MAX9850=m
CONFIG_SND_SOC_MAX9860=m
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3060_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM3168A_SPI=m
CONFIG_SND_SOC_PCM5102A=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_RK3328=m
CONFIG_SND_SOC_RK817=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT274=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT1011=m
CONFIG_SND_SOC_RT1015=m
CONFIG_SND_SOC_RT1015P=m
CONFIG_SND_SOC_RT1016=m
CONFIG_SND_SOC_RT1019=m
CONFIG_SND_SOC_RT1305=m
CONFIG_SND_SOC_RT1308=m
CONFIG_SND_SOC_RT1308_SDW=m
CONFIG_SND_SOC_RT1316_SDW=m
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5514_SPI=m
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_RT5660=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5665=m
CONFIG_SND_SOC_RT5668=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5677_SPI=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_I2C=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT5682S=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT711_SDCA_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
CONFIG_SND_SOC_RT715_SDCA_SDW=m
CONFIG_SND_SOC_RT9120=m
CONFIG_SND_SOC_SDW_MOCKUP=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIMPLE_MUX=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SRC4XXX_I2C=m
CONFIG_SND_SOC_SRC4XXX=m
CONFIG_SND_SOC_SSM2305=m
CONFIG_SND_SOC_SSM2518=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_SPI=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STA529=m
CONFIG_SND_SOC_STAC9766=m
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
CONFIG_SND_SOC_TAS2562=m
CONFIG_SND_SOC_TAS2764=m
CONFIG_SND_SOC_TAS2770=m
CONFIG_SND_SOC_TAS2780=m
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
CONFIG_SND_SOC_TAS5805M=m
CONFIG_SND_SOC_TAS6424=m
CONFIG_SND_SOC_TDA7419=m
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TFA989X=m
CONFIG_SND_SOC_TLV320ADC3XXX=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC23_SPI=m
CONFIG_SND_SOC_TLV320AIC26=m
CONFIG_SND_SOC_TLV320AIC31XX=m
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320AIC3X_I2C=m
CONFIG_SND_SOC_TLV320AIC3X_SPI=m
CONFIG_SND_SOC_TLV320DAC33=m
CONFIG_SND_SOC_TLV320ADCX140=m
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_TSCS42XX=m
CONFIG_SND_SOC_TSCS454=m
# CONFIG_SND_SOC_TWL4030 is not set
# CONFIG_SND_SOC_TWL6040 is not set
CONFIG_SND_SOC_UDA1334=m
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WCD9335=m
CONFIG_SND_SOC_WCD_MBHC=m
# CONFIG_SND_SOC_WCD934X is not set
CONFIG_SND_SOC_WCD938X=m
CONFIG_SND_SOC_WCD938X_SDW=m
CONFIG_SND_SOC_WL1273=m
CONFIG_SND_SOC_WM0010=m
CONFIG_SND_SOC_WM1250_EV1=m
CONFIG_SND_SOC_WM2000=m
CONFIG_SND_SOC_WM2200=m
CONFIG_SND_SOC_WM5100=m
CONFIG_SND_SOC_WM5102=m
CONFIG_SND_SOC_WM5110=m
# CONFIG_SND_SOC_WM8350 is not set
# CONFIG_SND_SOC_WM8400 is not set
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8727=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8731_I2C=m
CONFIG_SND_SOC_WM8731_SPI=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804_SPI=m
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8955=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8983=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WM8988=m
CONFIG_SND_SOC_WM8990=m
CONFIG_SND_SOC_WM8991=m
CONFIG_SND_SOC_WM8993=m
CONFIG_SND_SOC_WM8994=m
CONFIG_SND_SOC_WM8995=m
CONFIG_SND_SOC_WM8996=m
CONFIG_SND_SOC_WM8997=m
CONFIG_SND_SOC_WM8998=m
CONFIG_SND_SOC_WM9081=m
CONFIG_SND_SOC_WM9090=m
CONFIG_SND_SOC_WM9705=m
CONFIG_SND_SOC_WM9712=m
CONFIG_SND_SOC_WM9713=m
CONFIG_SND_SOC_WSA881X=m
CONFIG_SND_SOC_WSA883X=m
CONFIG_SND_SOC_ZL38060=m
CONFIG_SND_SOC_LM4857=m
CONFIG_SND_SOC_MAX9759=m
CONFIG_SND_SOC_MAX9768=m
CONFIG_SND_SOC_MAX9877=m
CONFIG_SND_SOC_MC13783=m
CONFIG_SND_SOC_ML26124=m
CONFIG_SND_SOC_MT6351=m
CONFIG_SND_SOC_MT6358=m
CONFIG_SND_SOC_MT6359=m
CONFIG_SND_SOC_MT6359_ACCDET=m
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8315=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8821=m
CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_LPASS_MACRO_COMMON=m
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
# CONFIG_SND_SOC_LPASS_TX_MACRO is not set
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD2=m
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=m
CONFIG_SND_TEST_COMPONENT=m
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_BIGBEN_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
CONFIG_HID_CREATIVE_SB0540=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
CONFIG_HID_FT260=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_GLORIOUS=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=m
CONFIG_HID_GOOGLE_HAMMER=m
CONFIG_HID_VIVALDI=m
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_VRC2=m
CONFIG_HID_XIAOMI=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LETSKETCH=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
CONFIG_HID_MEGAWORLD_FF=m
CONFIG_HID_REDRAGON=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NINTENDO=m
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_PXRC=m
CONFIG_HID_RAZER=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SEMITEK=m
CONFIG_HID_SIGMAMICRO=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_TOPRE=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_U2FZERO=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
CONFIG_HID_MCP2221=m
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# end of USB HID Boot Protocol drivers
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID_OF=m
CONFIG_I2C_HID_OF_ELAN=m
CONFIG_I2C_HID_OF_GOODIX=m
# end of I2C HID support

CONFIG_I2C_HID_CORE=m
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_FEW_INIT_RETRIES=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_OTG_FSM=m
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_BRCMSTB=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_MAX3421_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS_HCD=m
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_RENESAS_USBHS=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
CONFIG_USBIP_DEBUG=y
CONFIG_USB_MTU3=m
# CONFIG_USB_MTU3_HOST is not set
# CONFIG_USB_MTU3_GADGET is not set
CONFIG_USB_MTU3_DUAL_ROLE=y
CONFIG_USB_MTU3_DEBUG=y
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_HOST=y

#
# Platform Glue Layer
#
CONFIG_USB_MUSB_TUSB6010=m
CONFIG_USB_MUSB_DSPS=m
CONFIG_USB_MUSB_UX500=m
CONFIG_USB_MUSB_MEDIATEK=m
CONFIG_USB_MUSB_POLARFIRE_SOC=m

#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_XR=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_QCOM_EUD=m
CONFIG_APPLE_MFI_FASTCHARGE=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HUB_USB251XB=m
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_LINK_LAYER_TEST=m
CONFIG_USB_CHAOSKEY=m
CONFIG_BRCM_USB_PINMAP=m
CONFIG_USB_ONBOARD_HUB=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_CONTROL_USB=m
CONFIG_AM335X_PHY_USB=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_TAHVO_USB=m
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=m
CONFIG_USB_TEGRA_PHY=m
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_JZ4770_PHY=m
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
CONFIG_USB_LPC32XX=m
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_RENESAS_USB3=m
CONFIG_USB_PXA27X=m
CONFIG_USB_M66592=m
CONFIG_USB_NET2272=m
CONFIG_USB_MAX3420_UDC=m
CONFIG_USB_ASPEED_UDC=m
CONFIG_USB_ASPEED_VHUB=m
CONFIG_USB_DUMMY_HCD=m
# end of USB Peripheral Controller

CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_PHONET=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_UAC1=m
CONFIG_USB_F_UAC1_LEGACY=m
CONFIG_USB_F_UAC2=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_F_TCM=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y

#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=m
CONFIG_USB_ZERO_HNPTEST=y
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
CONFIG_GADGET_UAC1_LEGACY=y
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_GADGET_TARGET=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
CONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations

CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_TCPCI=m
CONFIG_TYPEC_RT1711H=m
CONFIG_TYPEC_MT6360=m
CONFIG_TYPEC_TCPCI_MT6370=m
CONFIG_TYPEC_TCPCI_MAXIM=m
CONFIG_TYPEC_FUSB302=m
CONFIG_TYPEC_UCSI=m
CONFIG_UCSI_CCG=m
CONFIG_UCSI_STM32G0=m
CONFIG_TYPEC_TPS6598X=m
CONFIG_TYPEC_ANX7411=m
CONFIG_TYPEC_RT1719=m
CONFIG_TYPEC_HD3SS3220=m
CONFIG_TYPEC_STUSB160X=m
CONFIG_TYPEC_QCOM_PMIC=m
CONFIG_TYPEC_WUSB3801=m

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=m
CONFIG_TYPEC_MUX_PI3USB30532=m
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# end of USB Type-C Alternate Mode drivers

CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=m
CONFIG_PWRSEQ_EMMC=m
CONFIG_PWRSEQ_SD8787=m
CONFIG_PWRSEQ_SIMPLE=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
CONFIG_MMC_CRYPTO=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
CONFIG_MMC_MOXART=m
CONFIG_MMC_OMAP_HS=m
CONFIG_MMC_DAVINCI=m
CONFIG_MMC_SPI=m
CONFIG_MMC_S3C=m
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
CONFIG_MMC_S3C_PIO=y
# CONFIG_MMC_S3C_DMA is not set
CONFIG_MMC_TMIO_CORE=m
CONFIG_MMC_TMIO=m
CONFIG_MMC_SDHI=m
CONFIG_MMC_SDHI_SYS_DMAC=m
CONFIG_MMC_SDHI_INTERNAL_DMAC=m
CONFIG_MMC_UNIPHIER=m
CONFIG_MMC_DW=m
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_BLUEFIELD=m
CONFIG_MMC_DW_EXYNOS=m
CONFIG_MMC_DW_HI3798CV200=m
CONFIG_MMC_DW_K3=m
CONFIG_MMC_SH_MMCIF=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_HSQ=m
CONFIG_MMC_BCM2835=m
CONFIG_MMC_LITEX=m
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
CONFIG_LEDS_HARDWARE_CONTROL=y

#
# LED drivers
#
CONFIG_LEDS_AN30259A=m
CONFIG_LEDS_ARIEL=m
CONFIG_LEDS_AW2013=m
CONFIG_LEDS_BCM6328=m
CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_CPCAP=m
CONFIG_LEDS_CR0014114=m
CONFIG_LEDS_EL15203000=m
CONFIG_LEDS_TURRIS_OMNIA=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_LM3692X=m
CONFIG_LEDS_MT6323=m
CONFIG_LEDS_S3C24XX=m
CONFIG_LEDS_COBALT_QUBE=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_NS2=m
CONFIG_LEDS_NETXBIG=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_MAX77650=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_IS31FL319X=m
CONFIG_LEDS_IS31FL32XX=m
CONFIG_LEDS_SC27XX_BLTC=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_PM8058=m
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
CONFIG_LEDS_SPI_BYTE=m
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
CONFIG_LEDS_LM36274=m
CONFIG_LEDS_TPS6105X=m
CONFIG_LEDS_IP30=m
CONFIG_LEDS_ACER_A500=m
CONFIG_LEDS_BCM63138=m
CONFIG_LEDS_LGM=m

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=m
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_LM3601X=m
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_MT6360=m
CONFIG_LEDS_RT4505=m
CONFIG_LEDS_RT8515=m
CONFIG_LEDS_SGM3140=m

#
# RGB LED drivers
#
CONFIG_LEDS_PWM_MULTICOLOR=m
CONFIG_LEDS_QCOM_LPG=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_AUDIO=m
CONFIG_LEDS_TRIGGER_TTY=m

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y

#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SERIALIO=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# end of Speakup console speech

CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=m
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_BRCMSTB=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_MAX77686=m
CONFIG_RTC_DRV_NCT3018Y=m
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_ISL12026=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_RC5T619=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV3032=m
CONFIG_RTC_DRV_RV8803=m
CONFIG_RTC_DRV_S5M=m
CONFIG_RTC_DRV_SD3078=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1302=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6916=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=m

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_GAMECUBE=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_SC27XX=m
CONFIG_RTC_DRV_SPEAR=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_ZYNQMP=m
CONFIG_RTC_DRV_CROS_EC=m
CONFIG_RTC_DRV_NTXEC=m

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=m
CONFIG_RTC_DRV_DAVINCI=m
CONFIG_RTC_DRV_DIGICOLOR=m
CONFIG_RTC_DRV_FSL_FTM_ALARM=m
CONFIG_RTC_DRV_MESON=m
CONFIG_RTC_DRV_MESON_VRTC=m
CONFIG_RTC_DRV_OMAP=m
CONFIG_RTC_DRV_S3C=m
CONFIG_RTC_DRV_EP93XX=m
CONFIG_RTC_DRV_SH=m
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_RTC_DRV_AT91SAM9=m
CONFIG_RTC_DRV_RZN1=m
CONFIG_RTC_DRV_GENERIC=m
CONFIG_RTC_DRV_VT8500=m
CONFIG_RTC_DRV_SUNXI=m
CONFIG_RTC_DRV_MV=m
CONFIG_RTC_DRV_ARMADA38X=m
CONFIG_RTC_DRV_CADENCE=m
CONFIG_RTC_DRV_FTRTC010=m
CONFIG_RTC_DRV_STMP=m
CONFIG_RTC_DRV_PCAP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_JZ4740=m
CONFIG_RTC_DRV_LPC24XX=m
CONFIG_RTC_DRV_LPC32XX=m
CONFIG_RTC_DRV_PM8XXX=m
CONFIG_RTC_DRV_TEGRA=m
CONFIG_RTC_DRV_MXC=m
CONFIG_RTC_DRV_MXC_V2=m
CONFIG_RTC_DRV_SNVS=m
CONFIG_RTC_DRV_MOXART=m
CONFIG_RTC_DRV_MT2712=m
CONFIG_RTC_DRV_MT6397=m
CONFIG_RTC_DRV_MT7622=m
CONFIG_RTC_DRV_XGENE=m
CONFIG_RTC_DRV_R7301=m
CONFIG_RTC_DRV_STM32=m
CONFIG_RTC_DRV_CPCAP=m
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_ASPEED=m
CONFIG_RTC_DRV_TI_K3=m

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_RTC_DRV_GOLDFISH=m
CONFIG_RTC_DRV_MSC313=m

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=m
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=m
CONFIG_LINEDISP=m
CONFIG_HD44780_COMMON=m
CONFIG_HD44780=m
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_IMG_ASCII_LCD=m
CONFIG_HT16K33=m
CONFIG_LCD2S=m
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=m
CONFIG_VFIO=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PLATFORM=m
CONFIG_VFIO_AMBA=m
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=m
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=m
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=m
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_VDPA=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
CONFIG_VDPA=m
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST_VDPA=m
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=m
CONFIG_GREYBUS_ES2=m
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SSV_DNP=m
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_AMPLC_DIO200_ISA=m
CONFIG_COMEDI_AMPLC_PC236_ISA=m
CONFIG_COMEDI_AMPLC_PC263_ISA=m
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=m
CONFIG_COMEDI_DAC02=m
CONFIG_COMEDI_DAS16M1=m
CONFIG_COMEDI_DAS08_ISA=m
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=m
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_C6XDIGIO=m
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_NI_LABPC_ISA=m
CONFIG_COMEDI_PCMAD=m
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=m
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_NI_USB6501=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8254=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_8255_SA=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_ROUTING=m
CONFIG_COMEDI_TESTS=m
CONFIG_COMEDI_TESTS_EXAMPLE=m
CONFIG_COMEDI_TESTS_NI_ROUTES=m
CONFIG_STAGING=y
CONFIG_PRISM2_USB=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8723BS=m
CONFIG_R8712U=m
CONFIG_R8188EU=m
CONFIG_OCTEON_ETHERNET=m
CONFIG_VT6656=m

#
# IIO staging drivers
#

#
# Accelerometers
#
CONFIG_ADIS16203=m
CONFIG_ADIS16240=m
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7816=m
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m
# end of Analog digital bi-direction converters

#
# Direct Digital Synthesis
#
CONFIG_AD9832=m
CONFIG_AD9834=m
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
CONFIG_ADE7854_SPI=m
# end of Active energy metering IC

#
# Resolver to digital converters
#
CONFIG_AD2S1210=m
# end of Resolver to digital converters
# end of IIO staging drivers

CONFIG_USB_EMXX=m
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_MAX96712=m
CONFIG_VIDEO_OMAP4=m
CONFIG_VIDEO_ROCKCHIP_VDEC=m
CONFIG_VIDEO_SUNXI=y
CONFIG_STAGING_MEDIA_DEPRECATED=y
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_VIU=m
CONFIG_VIDEO_STKWEBCAM=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
CONFIG_VIDEO_DM6446_CCDC=m
CONFIG_VIDEO_DM355_CCDC=m
CONFIG_VIDEO_DM365_ISIF=m
CONFIG_USB_ZR364XX=m
CONFIG_STAGING_BOARD=y
CONFIG_LTE_GDM724X=m
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
CONFIG_FB_TFT_BD663474=m
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_HX8357D=m
CONFIG_FB_TFT_ILI9163=m
CONFIG_FB_TFT_ILI9320=m
CONFIG_FB_TFT_ILI9325=m
CONFIG_FB_TFT_ILI9340=m
CONFIG_FB_TFT_ILI9341=m
CONFIG_FB_TFT_ILI9481=m
CONFIG_FB_TFT_ILI9486=m
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
CONFIG_FB_TFT_S6D02A1=m
CONFIG_FB_TFT_S6D1121=m
CONFIG_FB_TFT_SEPS525=m
CONFIG_FB_TFT_SH1106=m
CONFIG_FB_TFT_SSD1289=m
CONFIG_FB_TFT_SSD1305=m
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1331=m
CONFIG_FB_TFT_SSD1351=m
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_ST7789V=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
CONFIG_KS7010=m
CONFIG_GREYBUS_AUDIO=m
CONFIG_GREYBUS_AUDIO_APB_CODEC=m
CONFIG_GREYBUS_BOOTROM=m
CONFIG_GREYBUS_FIRMWARE=m
CONFIG_GREYBUS_HID=m
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
CONFIG_GREYBUS_VIBRATOR=m
CONFIG_GREYBUS_BRIDGED_PHY=m
CONFIG_GREYBUS_GPIO=m
CONFIG_GREYBUS_I2C=m
CONFIG_GREYBUS_PWM=m
CONFIG_GREYBUS_SDIO=m
CONFIG_GREYBUS_SPI=m
CONFIG_GREYBUS_UART=m
CONFIG_GREYBUS_USB=m
CONFIG_GREYBUS_ARCHE=m
CONFIG_BCM_VIDEOCORE=m
CONFIG_SND_BCM2835=m
CONFIG_VIDEO_BCM2835=m
CONFIG_PI433=m
CONFIG_XIL_AXIS_FIFO=m
CONFIG_FIELDBUS_DEV=m
CONFIG_HMS_ANYBUSS_BUS=m
CONFIG_ARCX_ANYBUS_CONTROLLER=m
CONFIG_HMS_PROFINET=m
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=m
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_RPMSG=m
CONFIG_CROS_EC_SPI=m
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=m
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LIGHTBAR=m
CONFIG_CROS_EC_VBC=m
CONFIG_CROS_EC_DEBUGFS=m
CONFIG_CROS_EC_SENSORHUB=m
CONFIG_CROS_EC_SYSFS=m
CONFIG_CROS_EC_TYPEC=m
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
CONFIG_CROS_KUNIT=m
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
CONFIG_MLXREG_IO=m
CONFIG_MLXREG_LC=m
CONFIG_NVSW_SN2201=m
CONFIG_OLPC_EC=y
CONFIG_OLPC_XO175=y
CONFIG_OLPC_XO175_EC=m
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_LEGACY_CLK=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_OMAP=m
CONFIG_HWSPINLOCK_QCOM=m
CONFIG_HWSPINLOCK_SPRD=m
CONFIG_HWSPINLOCK_STM32=m
CONFIG_HWSPINLOCK_SUN6I=m
CONFIG_HSEM_U8500=m

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
CONFIG_BCM_KONA_TIMER=y
CONFIG_DAVINCI_TIMER=y
CONFIG_DIGICOLOR_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_DW_APB_TIMER=y
CONFIG_FTTMR010_TIMER=y
CONFIG_IXP4XX_TIMER=y
CONFIG_MESON6_TIMER=y
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_TEGRA_TIMER=y
CONFIG_TEGRA186_TIMER=y
CONFIG_VT8500_TIMER=y
CONFIG_NPCM7XX_TIMER=y
CONFIG_ASM9260_TIMER=y
CONFIG_CLKSRC_DBX500_PRCMU=y
CONFIG_CLPS711X_TIMER=y
CONFIG_MXS_TIMER=y
CONFIG_NSPIRE_TIMER=y
CONFIG_INTEGRATOR_AP_TIMER=y
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_CLKSRC_TI_32K=y
CONFIG_CLKSRC_STM32_LP=y
CONFIG_CLKSRC_MPS2=y
CONFIG_ARC_TIMERS=y
CONFIG_ARC_TIMERS_64BIT=y
CONFIG_ARM_TIMER_SP804=y
CONFIG_ARMV7M_SYSTICK=y
CONFIG_ATMEL_PIT=y
CONFIG_ATMEL_ST=y
CONFIG_CLKSRC_SAMSUNG_PWM=y
CONFIG_FSL_FTM_TIMER=y
CONFIG_OXNAS_RPS_TIMER=y
CONFIG_SYS_SUPPORTS_SH_CMT=y
CONFIG_MTK_TIMER=y
CONFIG_SPRD_TIMER=y
CONFIG_CLKSRC_JCORE_PIT=y
CONFIG_SH_TIMER_CMT=y
CONFIG_SH_TIMER_MTU2=y
CONFIG_RENESAS_OSTM=y
CONFIG_SH_TIMER_TMU=y
CONFIG_EM_TIMER_STI=y
CONFIG_CLKSRC_VERSATILE=y
CONFIG_CLKSRC_PXA=y
CONFIG_TIMER_IMX_SYS_CTR=y
CONFIG_CLKSRC_ST_LPC=y
CONFIG_GXP_TIMER=y
CONFIG_MSC313E_TIMER=y
CONFIG_MICROCHIP_PIT64B=y
CONFIG_GOLDFISH_TIMER=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_IMX_MBOX=m
CONFIG_PLATFORM_MHU=m
CONFIG_ARMADA_37XX_RWTM_MBOX=m
CONFIG_ROCKCHIP_MBOX=y
CONFIG_ALTERA_MBOX=m
CONFIG_HI3660_MBOX=m
CONFIG_HI6220_MBOX=m
CONFIG_MAILBOX_TEST=m
CONFIG_POLARFIRE_SOC_MAILBOX=m
CONFIG_QCOM_APCS_IPC=m
CONFIG_BCM_PDC_MBOX=m
CONFIG_STM32_IPCC=m
CONFIG_MTK_ADSP_MBOX=m
CONFIG_MTK_CMDQ_MBOX=m
CONFIG_SUN6I_MSGBOX=m
CONFIG_SPRD_MBOX=m
CONFIG_QCOM_IPCC=m
CONFIG_IOMMU_IOVA=m
CONFIG_IOMMU_API=y

#
# Remoteproc drivers
#
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
CONFIG_RPMSG_CTRL=m
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
CONFIG_RPMSG_QCOM_GLINK_SMEM=m
CONFIG_RPMSG_QCOM_SMD=m
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_QCOM=m

#
# SOC (System On Chip) specific Drivers
#
CONFIG_OWL_PM_DOMAINS_HELPER=y
CONFIG_OWL_PM_DOMAINS=y

#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=m
CONFIG_MESON_CLK_MEASURE=m
CONFIG_MESON_GX_SOCINFO=y
CONFIG_MESON_GX_PM_DOMAINS=m
CONFIG_MESON_EE_PM_DOMAINS=m
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
CONFIG_APPLE_PMGR_PWRSTATE=y
CONFIG_APPLE_RTKIT=m
CONFIG_APPLE_SART=m
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=m
CONFIG_ASPEED_LPC_SNOOP=m
CONFIG_ASPEED_UART_ROUTING=m
CONFIG_ASPEED_P2A_CTRL=m
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers

CONFIG_AT91_SOC_ID=y
CONFIG_AT91_SOC_SFR=m

#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BCM63XX=y
CONFIG_SOC_BRCMSTB=y
CONFIG_BCM63XX_POWER=y
CONFIG_BCM_PMB=y
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_QE_TDM=y
CONFIG_DPAA2_CONSOLE=m
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
CONFIG_IMX_GPCV2_PM_DOMAINS=y
CONFIG_SOC_IMX8M=y
CONFIG_SOC_IMX9=m
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=m
CONFIG_IXP4XX_NPE=m
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=m
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=m
CONFIG_MTK_DEVAPC=m
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=m
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_SCPSYS_PM_DOMAINS=y
CONFIG_MTK_MMSYS=y
CONFIG_MTK_SVS=m
# end of MediaTek SoC drivers

CONFIG_POLARFIRE_SOC_SYS_CTRL=m

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=m
CONFIG_QCOM_GENI_SE=m
CONFIG_QCOM_GSBI=m
CONFIG_QCOM_LLCC=m
CONFIG_QCOM_PDR_HELPERS=m
CONFIG_QCOM_QMI_HELPERS=m
CONFIG_QCOM_RPMH=m
CONFIG_QCOM_RPMHPD=m
CONFIG_QCOM_RPMPD=m
CONFIG_QCOM_SMEM=m
CONFIG_QCOM_SMD_RPM=m
CONFIG_QCOM_SMEM_STATE=y
CONFIG_QCOM_SMP2P=m
CONFIG_QCOM_SMSM=m
CONFIG_QCOM_SOCINFO=m
CONFIG_QCOM_SPM=m
CONFIG_QCOM_STATS=m
CONFIG_QCOM_WCNSS_CTRL=m
CONFIG_QCOM_APR=m
CONFIG_QCOM_ICC_BWMON=m
# end of Qualcomm SoC drivers

CONFIG_SOC_RENESAS=y
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RCAR_GEN4=y
CONFIG_SYSC_R8A77995=y
CONFIG_SYSC_R8A7794=y
CONFIG_SYSC_R8A77990=y
CONFIG_SYSC_R8A7779=y
CONFIG_SYSC_R8A7790=y
CONFIG_SYSC_R8A7795=y
CONFIG_SYSC_R8A7791=y
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
CONFIG_SYSC_R8A779F0=y
CONFIG_SYSC_R8A7792=y
CONFIG_SYSC_R8A77980=y
CONFIG_SYSC_R8A77970=y
CONFIG_SYSC_R8A779A0=y
CONFIG_SYSC_R8A779G0=y
CONFIG_SYSC_RMOBILE=y
CONFIG_SYSC_R8A77470=y
CONFIG_SYSC_R8A7745=y
CONFIG_SYSC_R8A7742=y
CONFIG_SYSC_R8A7743=y
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A774E1=y
CONFIG_SYSC_R8A774A1=y
CONFIG_SYSC_R8A774B1=y
CONFIG_ROCKCHIP_GRF=y
CONFIG_ROCKCHIP_IODOMAIN=m
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ROCKCHIP_DTPM=m
CONFIG_SOC_SAMSUNG=y
CONFIG_EXYNOS_ASV_ARM=y
CONFIG_EXYNOS_CHIPID=m
CONFIG_EXYNOS_USI=m
CONFIG_EXYNOS_PM_DOMAINS=y
CONFIG_EXYNOS_REGULATOR_COUPLER=y
CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
CONFIG_SOC_TI=y
CONFIG_UX500_SOC_ID=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=m
CONFIG_DEVFREQ_GOV_USERSPACE=m
CONFIG_DEVFREQ_GOV_PASSIVE=m

#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
CONFIG_ARM_IMX_BUS_DEVFREQ=m
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=m
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_FSA9480=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_QCOM_SPMI_MISC=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_USBC_CROS_EC=m
CONFIG_EXTCON_USBC_TUSB320=m
CONFIG_MEMORY=y
CONFIG_DDR=y
CONFIG_ATMEL_SDRAMC=y
CONFIG_ATMEL_EBI=y
CONFIG_BRCMSTB_DPFE=m
CONFIG_BRCMSTB_MEMC=m
CONFIG_BT1_L2_CTL=y
CONFIG_TI_AEMIF=m
CONFIG_TI_EMIF=m
CONFIG_OMAP_GPMC=m
CONFIG_OMAP_GPMC_DEBUG=y
CONFIG_FPGA_DFL_EMIF=m
CONFIG_MVEBU_DEVBUS=y
CONFIG_FSL_CORENET_CF=m
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_MTK_SMI=m
CONFIG_DA8XX_DDRCTL=y
CONFIG_RENESAS_RPCIF=m
CONFIG_STM32_FMC2_EBI=m
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS5422_DMC=m
CONFIG_EXYNOS_SROM=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m

#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
CONFIG_ADXL313=m
CONFIG_ADXL313_I2C=m
CONFIG_ADXL313_SPI=m
CONFIG_ADXL355=m
CONFIG_ADXL355_I2C=m
CONFIG_ADXL355_SPI=m
CONFIG_ADXL367=m
CONFIG_ADXL367_SPI=m
CONFIG_ADXL367_I2C=m
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
CONFIG_ADXL372_I2C=m
CONFIG_BMA220=m
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
CONFIG_BMI088_ACCEL=m
CONFIG_BMI088_ACCEL_SPI=m
CONFIG_DA280=m
CONFIG_DA311=m
CONFIG_DMARD06=m
CONFIG_DMARD09=m
CONFIG_DMARD10=m
CONFIG_FXLS8962AF=m
CONFIG_FXLS8962AF_I2C=m
CONFIG_FXLS8962AF_SPI=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MSA311=m
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_SCA3000=m
CONFIG_SCA3300=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
CONFIG_AD7091R5=m
CONFIG_AD7124=m
CONFIG_AD7192=m
CONFIG_AD7266=m
CONFIG_AD7280=m
CONFIG_AD7291=m
CONFIG_AD7292=m
CONFIG_AD7298=m
CONFIG_AD7476=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7766=m
CONFIG_AD7768_1=m
CONFIG_AD7780=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
CONFIG_AD7949=m
CONFIG_AD799X=m
CONFIG_AD9467=m
CONFIG_ADI_AXI_ADC=m
CONFIG_AT91_ADC=m
CONFIG_AT91_SAMA5D2_ADC=m
CONFIG_AXP20X_ADC=m
CONFIG_AXP288_ADC=m
CONFIG_BCM_IPROC_ADC=m
CONFIG_BERLIN2_ADC=m
CONFIG_CC10001_ADC=m
CONFIG_CPCAP_ADC=m
CONFIG_DA9150_GPADC=m
CONFIG_DLN2_ADC=m
CONFIG_ENVELOPE_DETECTOR=m
CONFIG_EXYNOS_ADC=m
CONFIG_MXS_LRADC_ADC=m
CONFIG_FSL_MX25_ADC=m
CONFIG_HI8435=m
CONFIG_HX711=m
CONFIG_INA2XX_ADC=m
CONFIG_INGENIC_ADC=m
CONFIG_IMX7D_ADC=m
CONFIG_IMX8QXP_ADC=m
CONFIG_LPC18XX_ADC=m
CONFIG_LPC32XX_ADC=m
CONFIG_LTC2471=m
CONFIG_LTC2485=m
CONFIG_LTC2496=m
CONFIG_LTC2497=m
CONFIG_MAX1027=m
CONFIG_MAX11100=m
CONFIG_MAX1118=m
CONFIG_MAX11205=m
CONFIG_MAX1241=m
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP320X=m
CONFIG_MCP3422=m
CONFIG_MCP3911=m
CONFIG_MEDIATEK_MT6360_ADC=m
CONFIG_MEDIATEK_MT6577_AUXADC=m
CONFIG_MEN_Z188_ADC=m
CONFIG_MP2629_ADC=m
CONFIG_NAU7802=m
CONFIG_NPCM_ADC=m
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_PM8XXX_XOADC=m
CONFIG_QCOM_SPMI_RRADC=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
CONFIG_QCOM_SPMI_ADC5=m
CONFIG_RCAR_GYRO_ADC=m
CONFIG_RN5T618_ADC=m
CONFIG_ROCKCHIP_SARADC=m
CONFIG_RICHTEK_RTQ6056=m
CONFIG_RZG2L_ADC=m
CONFIG_SC27XX_ADC=m
CONFIG_SPEAR_ADC=m
CONFIG_SD_ADC_MODULATOR=m
CONFIG_STM32_ADC_CORE=m
CONFIG_STM32_ADC=m
CONFIG_STM32_DFSDM_CORE=m
CONFIG_STM32_DFSDM_ADC=m
CONFIG_STMPE_ADC=m
CONFIG_SUN4I_GPADC=m
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=m
CONFIG_TI_ADC084S021=m
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC108S102=m
CONFIG_TI_ADC128S052=m
CONFIG_TI_ADC161S626=m
CONFIG_TI_ADS1015=m
CONFIG_TI_ADS7950=m
CONFIG_TI_ADS8344=m
CONFIG_TI_ADS8688=m
CONFIG_TI_ADS124S08=m
CONFIG_TI_ADS131E08=m
CONFIG_TI_TLC4541=m
CONFIG_TI_TSC2046=m
CONFIG_VF610_ADC=m
CONFIG_VIPERBOARD_ADC=m
CONFIG_XILINX_XADC=m
CONFIG_XILINX_AMS=m
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
CONFIG_AD74413R=m
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=m
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_AD8366=m
CONFIG_ADA4250=m
CONFIG_HMC425=m
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7746=m
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_ATLAS_EZO_SENSOR=m
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_BME680_SPI=m
CONFIG_CCS811=m
CONFIG_IAQCORE=m
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
CONFIG_SCD30_I2C=m
CONFIG_SCD30_SERIAL=m
CONFIG_SCD4X=m
CONFIG_SENSIRION_SGP30=m
CONFIG_SENSIRION_SGP40=m
CONFIG_SPS30=m
CONFIG_SPS30_I2C=m
CONFIG_SPS30_SERIAL=m
CONFIG_SENSEAIR_SUNRISE_CO2=m
CONFIG_VZ89X=m
# end of Chemical Sensors

CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=m

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=m

#
# IIO SCMI Sensors
#
CONFIG_IIO_SCMI=m
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=m
CONFIG_IIO_SSP_SENSORHUB=m
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD3552R=m
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
CONFIG_AD5592R_BASE=m
CONFIG_AD5592R=m
CONFIG_AD5593R=m
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
CONFIG_LTC2688=m
CONFIG_AD5686=m
CONFIG_AD5686_SPI=m
CONFIG_AD5696_I2C=m
CONFIG_AD5755=m
CONFIG_AD5758=m
CONFIG_AD5761=m
CONFIG_AD5764=m
CONFIG_AD5766=m
CONFIG_AD5770R=m
CONFIG_AD5791=m
CONFIG_AD7293=m
CONFIG_AD7303=m
CONFIG_AD8801=m
CONFIG_DPOT_DAC=m
CONFIG_DS4424=m
CONFIG_LPC18XX_DAC=m
CONFIG_LTC1660=m
CONFIG_LTC2632=m
CONFIG_M62332=m
CONFIG_MAX517=m
CONFIG_MAX5821=m
CONFIG_MCP4725=m
CONFIG_MCP4922=m
CONFIG_STM32_DAC=m
CONFIG_STM32_DAC_CORE=m
CONFIG_TI_DAC082S085=m
CONFIG_TI_DAC5571=m
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=m
CONFIG_VF610_DAC=m
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=m
CONFIG_IIO_SIMPLE_DUMMY=m
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
CONFIG_ADF4371=m
CONFIG_ADMV4420=m
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
CONFIG_ADIS16260=m
CONFIG_ADXRS290=m
CONFIG_ADXRS450=m
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_ITG3200=m
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4403=m
CONFIG_AFE4404=m
CONFIG_MAX30100=m
CONFIG_MAX30102=m
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_HDC100X=m
CONFIG_HDC2010=m
CONFIG_HID_SENSOR_HUMIDITY=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_ADIS16400=m
CONFIG_ADIS16460=m
CONFIG_ADIS16475=m
CONFIG_ADIS16480=m
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
CONFIG_BOSCH_BNO055=m
CONFIG_BOSCH_BNO055_SERIAL=m
CONFIG_BOSCH_BNO055_I2C=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_FXOS8700_SPI=m
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ST_LSM6DSX_I3C=m
CONFIG_IIO_ST_LSM9DS0=m
CONFIG_IIO_ST_LSM9DS0_I2C=m
CONFIG_IIO_ST_LSM9DS0_SPI=m
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_APDS9960=m
CONFIG_AS73211=m
CONFIG_BH1750=m
CONFIG_BH1780=m
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
CONFIG_CM3605=m
CONFIG_CM36651=m
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_GP2AP002=m
CONFIG_GP2AP020A00F=m
CONFIG_IQS621_ALS=m
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
CONFIG_LTRF216A=m
CONFIG_LV0104CS=m
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1133=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
CONFIG_TSL2591=m
CONFIG_TSL2772=m
CONFIG_TSL4531=m
CONFIG_US5182D=m
CONFIG_VCNL4000=m
CONFIG_VCNL4035=m
CONFIG_VEML6030=m
CONFIG_VEML6070=m
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=m
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
CONFIG_SENSORS_RM3100_SPI=m
CONFIG_YAMAHA_YAS530=m
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=m
# end of Multiplexers

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors

CONFIG_IIO_RESCALE_KUNIT_TEST=m
CONFIG_IIO_FORMAT_KUNIT_TEST=m

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_STM32_LPTIMER_TRIGGER=m
CONFIG_IIO_STM32_TIMER_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone

#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=m
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=m
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=m
CONFIG_AD5272=m
CONFIG_DS1803=m
CONFIG_MAX5432=m
CONFIG_MAX5481=m
CONFIG_MAX5487=m
CONFIG_MCP4018=m
CONFIG_MCP4131=m
CONFIG_MCP4531=m
CONFIG_MCP41010=m
CONFIG_TPL0102=m
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_IIO_CROS_EC_BARO=m
CONFIG_DLHL60D=m
CONFIG_DPS310=m
CONFIG_HID_SENSOR_PRESS=m
CONFIG_HP03=m
CONFIG_ICP10100=m
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
CONFIG_MS5611_SPI=m
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_T5403=m
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m
# end of Pressure sensors

#
# Lightning sensors
#
CONFIG_AS3935=m
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=m
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=m
CONFIG_SRF04=m
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
CONFIG_SX9324=m
CONFIG_SX9360=m
CONFIG_SX9500=m
CONFIG_SRF08=m
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S1200=m
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=m
CONFIG_LTC2983=m
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=m
CONFIG_MLX90632=m
CONFIG_TMP006=m
CONFIG_TMP007=m
CONFIG_TMP117=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_MAX31856=m
CONFIG_MAX31865=m
# end of Temperature sensors

CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_HLCDC_PWM=m
CONFIG_PWM_ATMEL_TCB=m
CONFIG_PWM_BCM_KONA=m
CONFIG_PWM_BCM2835=m
CONFIG_PWM_BERLIN=m
CONFIG_PWM_BRCMSTB=m
CONFIG_PWM_CLK=m
CONFIG_PWM_CLPS711X=m
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_EP93XX=m
CONFIG_PWM_FSL_FTM=m
CONFIG_PWM_HIBVT=m
CONFIG_PWM_IMX1=m
CONFIG_PWM_IMX27=m
CONFIG_PWM_IMX_TPM=m
CONFIG_PWM_INTEL_LGM=m
CONFIG_PWM_IQS620A=m
CONFIG_PWM_LP3943=m
CONFIG_PWM_LPC18XX_SCT=m
CONFIG_PWM_LPC32XX=m
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PLATFORM=m
CONFIG_PWM_MTK_DISP=m
CONFIG_PWM_MEDIATEK=m
CONFIG_PWM_MXS=m
CONFIG_PWM_NTXEC=m
CONFIG_PWM_OMAP_DMTIMER=m
CONFIG_PWM_PCA9685=m
CONFIG_PWM_PXA=m
CONFIG_PWM_RASPBERRYPI_POE=m
CONFIG_PWM_RCAR=m
CONFIG_PWM_RENESAS_TPU=m
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
CONFIG_PWM_SL28CPLD=m
CONFIG_PWM_SPEAR=m
CONFIG_PWM_SPRD=m
CONFIG_PWM_STI=m
CONFIG_PWM_STM32=m
CONFIG_PWM_STM32_LP=m
CONFIG_PWM_STMPE=y
CONFIG_PWM_SUNPLUS=m
CONFIG_PWM_TEGRA=m
CONFIG_PWM_TIECAP=m
CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_VISCONTI=m
CONFIG_PWM_VT8500=m

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=m
CONFIG_JCORE_AIC=y
CONFIG_RENESAS_INTC_IRQPIN=y
CONFIG_RENESAS_IRQC=y
CONFIG_RENESAS_RZA1_IRQC=y
CONFIG_RENESAS_RZG2L_IRQC=y
CONFIG_SL28CPLD_INTC=y
CONFIG_TS4800_IRQ=m
CONFIG_XILINX_INTC=y
CONFIG_INGENIC_TCU_IRQ=y
CONFIG_IRQ_UNIPHIER_AIDET=y
CONFIG_MESON_IRQ_GPIO=m
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_IMX_MU_MSI=m
CONFIG_EXYNOS_IRQ_COMBINER=y
CONFIG_MST_IRQ=y
CONFIG_MCHP_EIC=y
CONFIG_SUNPLUS_SP7021_INTC=y
# end of IRQ chip support

CONFIG_IPACK_BUS=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_A10SR=m
CONFIG_RESET_ATH79=y
CONFIG_RESET_AXS10X=y
CONFIG_RESET_BCM6345=y
CONFIG_RESET_BERLIN=m
CONFIG_RESET_BRCMSTB=m
CONFIG_RESET_BRCMSTB_RESCAL=m
CONFIG_RESET_HSDK=y
CONFIG_RESET_IMX7=m
CONFIG_RESET_INTEL_GW=y
CONFIG_RESET_K210=y
CONFIG_RESET_LANTIQ=y
CONFIG_RESET_LPC18XX=y
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_RESET_MESON=m
CONFIG_RESET_MESON_AUDIO_ARB=m
CONFIG_RESET_NPCM=y
CONFIG_RESET_PISTACHIO=y
CONFIG_RESET_QCOM_AOSS=m
CONFIG_RESET_QCOM_PDC=m
CONFIG_RESET_RASPBERRYPI=m
CONFIG_RESET_RZG2L_USBPHY_CTRL=m
CONFIG_RESET_SCMI=m
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
CONFIG_RESET_STARFIVE_JH7100=y
CONFIG_RESET_SUNPLUS=y
CONFIG_RESET_SUNXI=y
CONFIG_RESET_TI_SCI=m
CONFIG_RESET_TI_SYSCON=m
CONFIG_RESET_TI_TPS380X=m
CONFIG_RESET_TN48M_CPLD=m
CONFIG_RESET_UNIPHIER=m
CONFIG_RESET_UNIPHIER_GLUE=m
CONFIG_RESET_ZYNQ=y
CONFIG_COMMON_RESET_HI3660=m
CONFIG_COMMON_RESET_HI6220=m

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=m
CONFIG_PHY_PISTACHIO_USB=m
CONFIG_PHY_XGENE=m
CONFIG_USB_LGM_PHY=m
CONFIG_PHY_CAN_TRANSCEIVER=m
CONFIG_PHY_SUN4I_USB=m
CONFIG_PHY_SUN9I_USB=m
CONFIG_PHY_SUN50I_USB3=m
CONFIG_PHY_MESON8_HDMI_TX=m
CONFIG_PHY_MESON8B_USB2=m
CONFIG_PHY_MESON_GXL_USB2=m
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=m
CONFIG_PHY_MESON_G12A_USB2=m
CONFIG_PHY_MESON_G12A_USB3_PCIE=m
CONFIG_PHY_MESON_AXG_PCIE=m
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=m
CONFIG_PHY_MESON_AXG_MIPI_DPHY=m

#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=m
CONFIG_PHY_CYGNUS_PCIE=m
CONFIG_PHY_BCM_SR_USB=m
CONFIG_BCM_KONA_USB2_PHY=m
CONFIG_PHY_BCM_NS_USB2=m
CONFIG_PHY_BCM_NS_USB3=m
CONFIG_PHY_NS2_PCIE=m
CONFIG_PHY_NS2_USB_DRD=m
CONFIG_PHY_BRCM_SATA=m
CONFIG_PHY_BRCM_USB=m
CONFIG_PHY_BCM_SR_PCIE=m
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_DPHY=m
CONFIG_PHY_CADENCE_DPHY_RX=m
CONFIG_PHY_CADENCE_SALVO=m
CONFIG_PHY_FSL_IMX8MQ_USB=m
CONFIG_PHY_MIXEL_LVDS_PHY=m
CONFIG_PHY_MIXEL_MIPI_DPHY=m
CONFIG_PHY_FSL_IMX8M_PCIE=m
CONFIG_PHY_FSL_LYNX_28G=m
CONFIG_PHY_HI6220_USB=m
CONFIG_PHY_HI3660_USB=m
CONFIG_PHY_HI3670_USB=m
CONFIG_PHY_HI3670_PCIE=m
CONFIG_PHY_HISTB_COMBPHY=m
CONFIG_PHY_HISI_INNO_USB2=m
CONFIG_PHY_INGENIC_USB=m
CONFIG_PHY_LANTIQ_VRX200_PCIE=m
CONFIG_PHY_LANTIQ_RCU_USB2=m
CONFIG_ARMADA375_USBCLUSTER_PHY=y
CONFIG_PHY_BERLIN_SATA=m
CONFIG_PHY_BERLIN_USB=m
CONFIG_PHY_MVEBU_A3700_UTMI=m
CONFIG_PHY_MVEBU_A38X_COMPHY=m
CONFIG_PHY_MVEBU_CP110_UTMI=m
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=m
CONFIG_PHY_PXA_USB=m
CONFIG_PHY_MMP3_USB=m
CONFIG_PHY_MMP3_HSIC=m
CONFIG_PHY_MTK_PCIE=m
CONFIG_PHY_MTK_TPHY=m
CONFIG_PHY_MTK_UFS=m
CONFIG_PHY_MTK_XSPHY=m
CONFIG_PHY_MTK_DP=m
CONFIG_PHY_SPARX5_SERDES=m
CONFIG_PHY_LAN966X_SERDES=m
CONFIG_PHY_CPCAP_USB=m
CONFIG_PHY_MAPPHONE_MDM6600=m
CONFIG_PHY_OCELOT_SERDES=m
CONFIG_PHY_ATH79_USB=m
CONFIG_PHY_QCOM_IPQ4019_USB=m
CONFIG_PHY_QCOM_QUSB2=m
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_QCOM_USB_HS_28NM=m
CONFIG_PHY_QCOM_USB_SS=m
CONFIG_PHY_QCOM_IPQ806X_USB=m
CONFIG_PHY_MT7621_PCI=m
CONFIG_PHY_RALINK_USB=m
CONFIG_PHY_RCAR_GEN3_USB3=m
CONFIG_PHY_ROCKCHIP_DPHY_RX0=m
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=m
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=m
CONFIG_PHY_ROCKCHIP_TYPEC=m
CONFIG_PHY_EXYNOS_DP_VIDEO=m
CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
CONFIG_PHY_EXYNOS_PCIE=y
CONFIG_PHY_SAMSUNG_UFS=m
CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_S5PV210_USB2=y
CONFIG_PHY_UNIPHIER_USB2=m
CONFIG_PHY_UNIPHIER_USB3=m
CONFIG_PHY_UNIPHIER_PCIE=m
CONFIG_PHY_UNIPHIER_AHCI=m
CONFIG_PHY_ST_SPEAR1310_MIPHY=m
CONFIG_PHY_ST_SPEAR1340_MIPHY=m
CONFIG_PHY_STIH407_USB=m
CONFIG_PHY_SUNPLUS_USB=m
CONFIG_PHY_TEGRA194_P2U=m
CONFIG_PHY_DA8XX_USB=m
CONFIG_PHY_DM816X_USB=m
CONFIG_OMAP_CONTROL_PHY=m
CONFIG_TI_PIPE3=m
CONFIG_PHY_TUSB1210=m
CONFIG_PHY_INTEL_KEEMBAY_EMMC=m
CONFIG_PHY_INTEL_KEEMBAY_USB=m
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=m
CONFIG_PHY_INTEL_THUNDERBAY_EMMC=m
CONFIG_PHY_XILINX_ZYNQMP=m
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_IDLE_INJECT=y
CONFIG_DTPM=y
CONFIG_MCB=m
CONFIG_MCB_LPC=m

#
# Performance monitor support
#
CONFIG_ARM_CCN=m
CONFIG_ARM_CMN=m
CONFIG_FSL_IMX8_DDR_PMU=m
CONFIG_ARM_DMC620_PMU=m
CONFIG_ALIBABA_UNCORE_DRW_PMU=m
# end of Performance monitor support

CONFIG_RAS=y

#
# Android
#
# end of Android

CONFIG_DAX=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_APPLE_EFUSES=m
CONFIG_NVMEM_BCM_OCOTP=m
CONFIG_NVMEM_BRCM_NVRAM=m
CONFIG_NVMEM_IMX_IIM=m
CONFIG_NVMEM_IMX_OCOTP=m
CONFIG_NVMEM_JZ4780_EFUSE=m
CONFIG_NVMEM_LAN9662_OTPC=m
CONFIG_NVMEM_LAYERSCAPE_SFP=m
CONFIG_NVMEM_LPC18XX_EEPROM=m
CONFIG_NVMEM_LPC18XX_OTP=m
CONFIG_NVMEM_MESON_MX_EFUSE=m
CONFIG_NVMEM_MICROCHIP_OTPC=m
CONFIG_NVMEM_MTK_EFUSE=m
CONFIG_NVMEM_MXS_OCOTP=m
CONFIG_NVMEM_NINTENDO_OTP=m
CONFIG_NVMEM_QCOM_QFPROM=m
CONFIG_NVMEM_RAVE_SP_EEPROM=m
CONFIG_NVMEM_RMEM=m
CONFIG_NVMEM_ROCKCHIP_EFUSE=m
CONFIG_NVMEM_ROCKCHIP_OTP=m
CONFIG_NVMEM_SC27XX_EFUSE=m
CONFIG_NVMEM_SNVS_LPGPR=m
CONFIG_NVMEM_SPMI_SDAM=m
CONFIG_NVMEM_SPRD_EFUSE=m
CONFIG_NVMEM_STM32_ROMEM=m
CONFIG_NVMEM_SUNPLUS_OCOTP=m
CONFIG_NVMEM_U_BOOT_ENV=m
CONFIG_NVMEM_UNIPHIER_EFUSE=m
CONFIG_NVMEM_VF610_OCOTP=m

#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_PROTO_BASIC=m
CONFIG_STM_PROTO_SYS_T=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
# end of HW tracing support

CONFIG_FPGA=m
CONFIG_FPGA_MGR_SOCFPGA=m
CONFIG_FPGA_MGR_SOCFPGA_A10=m
CONFIG_ALTERA_PR_IP_CORE=m
CONFIG_ALTERA_PR_IP_CORE_PLAT=m
CONFIG_FPGA_MGR_ALTERA_PS_SPI=m
CONFIG_FPGA_MGR_ZYNQ_FPGA=m
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_FPGA_MGR_ICE40_SPI=m
CONFIG_FPGA_MGR_MACHXO2_SPI=m
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
CONFIG_OF_FPGA_REGION=m
CONFIG_FPGA_DFL=m
CONFIG_FPGA_DFL_FME=m
CONFIG_FPGA_DFL_FME_MGR=m
CONFIG_FPGA_DFL_FME_BRIDGE=m
CONFIG_FPGA_DFL_FME_REGION=m
CONFIG_FPGA_DFL_AFU=m
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=m
CONFIG_FPGA_MGR_ZYNQMP_FPGA=m
CONFIG_FPGA_MGR_VERSAL_FPGA=m
CONFIG_FPGA_M10_BMC_SEC_UPDATE=m
CONFIG_FPGA_MGR_MICROCHIP_SPI=m
CONFIG_FSI=m
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=m
CONFIG_FSI_MASTER_HUB=m
CONFIG_FSI_MASTER_AST_CF=m
CONFIG_FSI_MASTER_ASPEED=m
CONFIG_FSI_SCOM=m
CONFIG_FSI_SBEFIFO=m
CONFIG_FSI_OCC=m
CONFIG_TEE=m
CONFIG_MULTIPLEXER=m

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_ADGS1408=m
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=m
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=m
CONFIG_INTERCONNECT_IMX8MM=m
CONFIG_INTERCONNECT_IMX8MN=m
CONFIG_INTERCONNECT_IMX8MQ=m
CONFIG_INTERCONNECT_IMX8MP=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=m
CONFIG_INTERCONNECT_SAMSUNG=y
CONFIG_INTERCONNECT_EXYNOS=m
CONFIG_COUNTER=m
CONFIG_104_QUAD_8=m
CONFIG_INTERRUPT_CNT=m
CONFIG_STM32_TIMER_CNT=m
CONFIG_STM32_LPTIMER_CNT=m
CONFIG_TI_EQEP=m
CONFIG_FTM_QUADDEC=m
CONFIG_MICROCHIP_TCB_CAPTURE=m
CONFIG_TI_ECAP_CAPTURE=m
CONFIG_PECI=m
CONFIG_PECI_CPU=m
CONFIG_HTE=y
# end of Device Drivers

#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_F2FS_UNFAIR_RWSEM=y
CONFIG_ZONEFS_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=m
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=m
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_METACOPY=y

#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_ERROR_INJECTION=y
CONFIG_CACHEFILES_ONDEMAND=y
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=m
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=m
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_CRAMFS_MTD=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_MINIX_FS_NATIVE_ENDIAN=y
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=m
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=m
CONFIG_PSTORE_LZO_COMPRESS=m
CONFIG_PSTORE_LZ4_COMPRESS=m
CONFIG_PSTORE_LZ4HC_COMPRESS=m
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_FTRACE=y
CONFIG_PSTORE_RAM=m
CONFIG_PSTORE_ZONE=m
CONFIG_PSTORE_BLK=m
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_PSTORE_BLK_PMSG_SIZE=64
CONFIG_PSTORE_BLK_CONSOLE_SIZE=64
CONFIG_PSTORE_BLK_FTRACE_SIZE=64
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=m
CONFIG_EROFS_FS_DEBUG=y
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_ZIP_LZMA=y
CONFIG_EROFS_FS_ONDEMAND=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DEBUG_DUMP_KEYS=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_SMB_SERVER=m
CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=y
CONFIG_SMB_SERVER_KERBEROS5=y
CONFIG_SMBFS_COMMON=m
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
CONFIG_AFS_DEBUG_CURSOR=y
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEPRECATED_API=y
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=m
CONFIG_UNICODE_NORMALIZATION_SELFTEST=m
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y
CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENFORCE=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
CONFIG_IMA_APPRAISE_BUILD_POLICY=y
CONFIG_IMA_APPRAISE_REQUIRE_FIRMWARE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_MODULE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_POLICY_SIGS=y
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_APPRAISE_MODSIG=y
CONFIG_IMA_TRUSTED_KEYRING=y
CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY=y
CONFIG_IMA_BLACKLIST_KEYRING=y
CONFIG_IMA_LOAD_X509=y
CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
CONFIG_IMA_APPRAISE_SIGNED_INIT=y
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_DISABLE_HTABLE=y
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_EXTRA_SMACK_XATTRS=y
CONFIG_EVM_ADD_XATTRS=y
CONFIG_EVM_LOAD_X509=y
CONFIG_EVM_X509_PATH="/etc/keys/x509_evm.der"
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECDSA=m
CONFIG_CRYPTO_ECRDSA=m
CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=m
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARIA=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCTR=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_NHPOLY1305=m
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_POLYVAL=m
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m
CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_CRC64_ROCKSOFT=m
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=m
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_STATS=y
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_SUN8I_CE=m
CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG=y
CONFIG_CRYPTO_DEV_SUN8I_CE_HASH=y
CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG=y
CONFIG_CRYPTO_DEV_SUN8I_SS=m
CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG=y
CONFIG_CRYPTO_DEV_SUN8I_SS_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_SS_HASH=y
CONFIG_CRYPTO_DEV_SL3516=m
CONFIG_CRYPTO_DEV_SL3516_DEBUG=y
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
CONFIG_CRYPTO_DEV_S5P=m
CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=y
CONFIG_CRYPTO_DEV_ATMEL_AES=m
CONFIG_CRYPTO_DEV_ATMEL_TDES=m
CONFIG_CRYPTO_DEV_ATMEL_SHA=m
CONFIG_CRYPTO_DEV_ATMEL_I2C=m
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m
CONFIG_CRYPTO_DEV_QCE=m
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SHA=y
CONFIG_CRYPTO_DEV_QCE_AEAD=y
CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=m
CONFIG_CRYPTO_DEV_IMGTEC_HASH=m
CONFIG_CRYPTO_DEV_ZYNQMP_AES=m
CONFIG_CRYPTO_DEV_ZYNQMP_SHA3=m
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_HISI_SEC=m
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_CRYPTO_DEV_SA2UL=m
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4=m
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC=m
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU=m
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU_HMAC_SHA224=y
CONFIG_CRYPTO_DEV_ASPEED=m
CONFIG_CRYPTO_DEV_ASPEED_DEBUG=y
CONFIG_CRYPTO_DEV_ASPEED_HACE_HASH=y
CONFIG_CRYPTO_DEV_ASPEED_HACE_CRYPTO=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=m
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_FIPS_SIGNATURE_SELFTEST=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=m
CONFIG_RATIONAL=m
CONFIG_STMP_DEVICE=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC64_ROCKSOFT=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
CONFIG_CRC4=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_NO_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=m
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=m
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_6x10=y
CONFIG_FONT_10x18=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_TER16x32=y
CONFIG_FONT_6x8=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
CONFIG_OBJAGG=m
# end of Library routines

CONFIG_ASN1_ENCODER=m
CONFIG_POLYNOMIAL=m

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_SERIAL_CONSOLE=m
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=y
CONFIG_UBSAN_UNREACHABLE=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
CONFIG_NET_NS_REFCNT_TRACKER=y
CONFIG_DEBUG_NET=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_PAGE_REF=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SHRINKER_DEBUG=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_TEST=m
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_NOMMU_REGIONS=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=m
CONFIG_SCF_TORTURE_TEST=m
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_KOBJECT_RELEASE=y
CONFIG_HAVE_DEBUG_BUGVERBOSE=y

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=m
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_KPROBE_EVENTS_ON_NOTRACE=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT=y
CONFIG_SYNTH_EVENTS=y
CONFIG_USER_EVENTS=y
CONFIG_TRACE_EVENT_INJECT=y
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_FTRACE_RECORD_RECURSION=y
CONFIG_FTRACE_RECORD_RECURSION_SIZE=128
CONFIG_RING_BUFFER_RECORD_RECURSION=y
CONFIG_GCOV_PROFILE_FTRACE=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_TEST_SYSCALLS=y
CONFIG_RING_BUFFER_STARTUP_TEST=y
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_PREEMPTIRQ_DELAY_TEST=m
CONFIG_SYNTH_EVENT_GEN_TEST=m
CONFIG_KPROBE_EVENT_GEN_TEST=m
CONFIG_DA_MON_EVENTS=y
CONFIG_DA_MON_EVENTS_ID=y
CONFIG_RV=y
CONFIG_RV_MON_WWNR=y
CONFIG_RV_REACTORS=y
CONFIG_RV_REACT_PRINTK=y
CONFIG_RV_REACT_PANIC=y
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# sh Debugging
#
CONFIG_SH_STANDARD_BIOS=y
CONFIG_STACK_DEBUG=y
CONFIG_DUMP_CODE=y
CONFIG_DWARF_UNWINDER=y
CONFIG_SH_NO_BSS_INIT=y
CONFIG_MCOUNT=y
# end of sh Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=m
CONFIG_KUNIT_EXAMPLE_TEST=m
CONFIG_KUNIT_ALL_TESTS=m
CONFIG_KUNIT_DEFAULT_ENABLED=y
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=m
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAIL_SUNRPC=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=m
CONFIG_CPUMASK_KUNIT_TEST=m
CONFIG_TEST_LIST_SORT=m
CONFIG_TEST_MIN_HEAP=m
CONFIG_TEST_SORT=m
CONFIG_TEST_DIV64=m
CONFIG_KPROBES_SANITY_TEST=m
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_TEST_REF_TRACKER=m
CONFIG_RBTREE_TEST=m
CONFIG_REED_SOLOMON_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=m
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_TEST_HEXDUMP=m
CONFIG_STRING_SELFTEST=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_STRSCPY=m
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
CONFIG_TEST_SCANF=m
CONFIG_TEST_BITMAP=m
CONFIG_TEST_UUID=m
CONFIG_TEST_XARRAY=m
CONFIG_TEST_RHASHTABLE=m
CONFIG_TEST_SIPHASH=m
CONFIG_TEST_IDA=m
CONFIG_TEST_PARMAN=m
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
CONFIG_BITFIELD_KUNIT=m
CONFIG_HASH_KUNIT_TEST=m
CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_SYSCTL_KUNIT_TEST=m
CONFIG_LIST_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
CONFIG_CMDLINE_KUNIT_TEST=m
CONFIG_BITS_TEST=m
CONFIG_SLUB_KUNIT_TEST=m
CONFIG_RATIONAL_KUNIT_TEST=m
CONFIG_MEMCPY_KUNIT_TEST=m
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=m
CONFIG_OVERFLOW_KUNIT_TEST=m
CONFIG_STACKINIT_KUNIT_TEST=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_DYNAMIC_DEBUG=m
CONFIG_TEST_KMOD=m
CONFIG_TEST_MEMCAT_P=m
CONFIG_TEST_OBJAGG=m
CONFIG_TEST_MEMINIT=m
CONFIG_TEST_FREE_PAGES=m
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

CONFIG_WARN_MISSING_DOCUMENTS=y
CONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking

Re: [PATCH v7 10/11] net: dsa: qca8k: add LEDs support

[Arun.Ramadoss]

Hi Christian,

On Thu, 2022-12-15 at 00:54 +0100, Christian Marangi wrote:
> Add LEDs support for qca8k Switch Family. This will provide the LEDs
> hardware API to permit the PHY LED to support hardware mode.
> Each port have at least 3 LEDs and they can HW blink, set on/off or
> follow blink modes configured with the LED in hardware mode.
> Adds support for leds netdev trigger to support hardware triggers.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  drivers/net/dsa/qca/Kconfig      |   9 +
>  drivers/net/dsa/qca/Makefile     |   1 +
>  drivers/net/dsa/qca/qca8k-8xxx.c |   4 +
>  drivers/net/dsa/qca/qca8k-leds.c | 406
> +++++++++++++++++++++++++++++++
>  drivers/net/dsa/qca/qca8k.h      |  62 +++++
>  5 files changed, 482 insertions(+)
>  create mode 100644 drivers/net/dsa/qca/qca8k-leds.c
> 
> 
> diff --git a/drivers/net/dsa/qca/qca8k-leds.c
> b/drivers/net/dsa/qca/qca8k-leds.c
> new file mode 100644
> index 000000000000..b51cdcae31b2
> --- /dev/null
> +++ b/drivers/net/dsa/qca/qca8k-leds.c
> @@ -0,0 +1,406 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <net/dsa.h>
> +#include <linux/regmap.h>

Alphabatical order

> +
> +#include "qca8k.h"
> +
> +static int
> +qca8k_get_enable_led_reg(int port_num, int led_num, struct
> qca8k_led_pattern_en *reg_info)
> +{
> +	int shift;
> +
> +	switch (port_num) {
> +	case 0:
> +		reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
> +		reg_info->shift = 14;

Any macros other than magic number for 14, 30 

> +		break;
> +	case 1:
> +	case 2:
> +	case 3:
> +		reg_info->reg = QCA8K_LED_CTRL_REG(3);
> +		shift = 2 * led_num + (6 * (port_num - 1));
> +
> +		reg_info->shift = 8 + shift;
> +
> +		break;
> +	case 4:
> +		reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
> +		reg_info->shift = 30;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> 
> +
> +static void
> +qca8k_led_brightness_set(struct qca8k_led *led,
> +			 enum led_brightness b)

variable name other than b to have readability in code

> +{
> +	struct qca8k_led_pattern_en reg_info;
> +	struct qca8k_priv *priv = led->priv;
> +	u32 val = QCA8K_LED_ALWAYS_OFF;
> +
> +	qca8k_get_enable_led_reg(led->port_num, led->led_num,
> &reg_info);
> +
> +	if (b)
> +		val = QCA8K_LED_ALWAYS_ON;
> +
> +	regmap_update_bits(priv->regmap, reg_info.reg,
> +			   GENMASK(1, 0) << reg_info.shift,

GENMASK(1, 0) used in multiple place, replace with macro for
readability

> +			   val << reg_info.shift);
> +}
> +
> 
> +
> +static int
> +qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable)
> +{
> +	struct qca8k_led *led = container_of(ldev, struct qca8k_led,
> cdev);
> +

Blank line

> +	struct qca8k_led_pattern_en reg_info;
> +	struct qca8k_priv *priv = led->priv;
> +	u32 val = QCA8K_LED_ALWAYS_OFF;
> +
> +	qca8k_get_enable_led_reg(led->port_num, led->led_num,
> &reg_info);
> +
> +	if (enable)
> +		val = QCA8K_LED_RULE_CONTROLLED;
> +
> +	return regmap_update_bits(priv->regmap, reg_info.reg,
> +				  GENMASK(1, 0) << reg_info.shift,
> +				  val << reg_info.shift);
> +}
> +
> 
> +static bool
> +qca8k_cled_hw_control_status(struct led_classdev *ldev)
> +{
> +	struct qca8k_led *led = container_of(ldev, struct qca8k_led,
> cdev);
> +

Blank line

> +	struct qca8k_led_pattern_en reg_info;
> +	struct qca8k_priv *priv = led->priv;
> +	u32 val;
> +
> +	qca8k_get_enable_led_reg(led->port_num, led->led_num,
> &reg_info);
> +
> +	regmap_read(priv->regmap, reg_info.reg, &val);
> +
> +	val >>= reg_info.shift;
> +	val &= GENMASK(1, 0);
> +
> +	return val == QCA8K_LED_RULE_CONTROLLED;
> +}
> +
> 

Re: [PATCH v7 01/11] leds: add support for hardware driven LEDs

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 5438 bytes --]

Hi Christian,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on pavel-leds/for-next]
[also build test ERROR on robh/for-next net-next/master net/master linus/master v6.1 next-20221215]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Christian-Marangi/Adds-support-for-PHY-LEDs-with-offload-triggers/20221215-080414
base:   git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git for-next
patch link:    https://lore.kernel.org/r/20221214235438.30271-2-ansuelsmth%40gmail.com
patch subject: [PATCH v7 01/11] leds: add support for hardware driven LEDs
config: arc-randconfig-r005-20221214
compiler: arceb-elf-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/f714ac6012266bf89c4c1b7d5e6ebaf50d4c525c
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Christian-Marangi/Adds-support-for-PHY-LEDs-with-offload-triggers/20221215-080414
        git checkout f714ac6012266bf89c4c1b7d5e6ebaf50d4c525c
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arc SHELL=/bin/bash drivers/leds/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/leds/led-triggers.c: In function 'led_trigger_set':
>> drivers/leds/led-triggers.c:205:29: error: 'struct led_classdev' has no member named 'hw_control_status'
     205 |                     led_cdev->hw_control_status(led_cdev))
         |                             ^~
>> drivers/leds/led-triggers.c:206:33: error: 'struct led_classdev' has no member named 'hw_control_stop'
     206 |                         led_cdev->hw_control_stop(led_cdev);
         |                                 ^~


vim +205 drivers/leds/led-triggers.c

   177	
   178	/* Caller must ensure led_cdev->trigger_lock held */
   179	int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
   180	{
   181		char *event = NULL;
   182		char *envp[2];
   183		const char *name;
   184		int ret;
   185	
   186		if (!led_cdev->trigger && !trig)
   187			return 0;
   188	
   189		name = trig ? trig->name : "none";
   190		event = kasprintf(GFP_KERNEL, "TRIGGER=%s", name);
   191	
   192		/* Remove any existing trigger */
   193		if (led_cdev->trigger) {
   194			spin_lock(&led_cdev->trigger->leddev_list_lock);
   195			list_del_rcu(&led_cdev->trig_list);
   196			spin_unlock(&led_cdev->trigger->leddev_list_lock);
   197	
   198			/* ensure it's no longer visible on the led_cdevs list */
   199			synchronize_rcu();
   200	
   201			cancel_work_sync(&led_cdev->set_brightness_work);
   202			led_stop_software_blink(led_cdev);
   203			/* Disable hardware mode on trigger change if supported */
   204			if (led_cdev->blink_mode != SOFTWARE_CONTROLLED &&
 > 205			    led_cdev->hw_control_status(led_cdev))
 > 206				led_cdev->hw_control_stop(led_cdev);
   207			if (led_cdev->trigger->deactivate)
   208				led_cdev->trigger->deactivate(led_cdev);
   209			device_remove_groups(led_cdev->dev, led_cdev->trigger->groups);
   210			led_cdev->trigger = NULL;
   211			led_cdev->trigger_data = NULL;
   212			led_cdev->activated = false;
   213			led_set_brightness(led_cdev, LED_OFF);
   214		}
   215		if (trig) {
   216			/* Make sure the trigger support the LED blink mode */
   217			if (!led_trigger_is_supported(led_cdev, trig))
   218				return -EINVAL;
   219	
   220			spin_lock(&trig->leddev_list_lock);
   221			list_add_tail_rcu(&led_cdev->trig_list, &trig->led_cdevs);
   222			spin_unlock(&trig->leddev_list_lock);
   223			led_cdev->trigger = trig;
   224	
   225			if (trig->activate)
   226				ret = trig->activate(led_cdev);
   227			else
   228				ret = 0;
   229	
   230			if (ret)
   231				goto err_activate;
   232	
   233			ret = device_add_groups(led_cdev->dev, trig->groups);
   234			if (ret) {
   235				dev_err(led_cdev->dev, "Failed to add trigger attributes\n");
   236				goto err_add_groups;
   237			}
   238		}
   239	
   240		if (event) {
   241			envp[0] = event;
   242			envp[1] = NULL;
   243			if (kobject_uevent_env(&led_cdev->dev->kobj, KOBJ_CHANGE, envp))
   244				dev_err(led_cdev->dev,
   245					"%s: Error sending uevent\n", __func__);
   246			kfree(event);
   247		}
   248	
   249		return 0;
   250	
   251	err_add_groups:
   252	
   253		if (trig->deactivate)
   254			trig->deactivate(led_cdev);
   255	err_activate:
   256	
   257		spin_lock(&led_cdev->trigger->leddev_list_lock);
   258		list_del_rcu(&led_cdev->trig_list);
   259		spin_unlock(&led_cdev->trigger->leddev_list_lock);
   260		synchronize_rcu();
   261		led_cdev->trigger = NULL;
   262		led_cdev->trigger_data = NULL;
   263		led_set_brightness(led_cdev, LED_OFF);
   264		kfree(event);
   265	
   266		return ret;
   267	}
   268	EXPORT_SYMBOL_GPL(led_trigger_set);
   269	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 112889 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arc 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="arceb-elf-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_TIME_KUNIT_TEST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_BPF=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_MISC is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters

CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_ARC=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_CSUM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_MMU=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_STACKTRACE_SUPPORT=y

#
# ARC Architecture Configuration
#

#
# ARC Platform/SoC/Board
#
# CONFIG_ARC_PLAT_TB10X is not set
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ARC_SOC_HSDK=y
# end of ARC Platform/SoC/Board

# CONFIG_ISA_ARCOMPACT is not set
CONFIG_ISA_ARCV2=y

#
# ARC CPU Configuration
#
CONFIG_ARC_CPU_HS=y
CONFIG_ARC_TUNE_MCPU=""
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
# CONFIG_ARC_SMP_HALT_ON_RESET is not set
CONFIG_ARC_MCIP=y
CONFIG_ARC_CACHE=y
CONFIG_ARC_CACHE_LINE_SHIFT=6
CONFIG_ARC_HAS_ICACHE=y
CONFIG_ARC_HAS_DCACHE=y
CONFIG_ARC_CACHE_PAGES=y
# CONFIG_ARC_HAS_ICCM is not set
# CONFIG_ARC_HAS_DCCM is not set
CONFIG_ARC_MMU_V4=y
# CONFIG_ARC_PAGE_SIZE_8K is not set
# CONFIG_ARC_PAGE_SIZE_16K is not set
CONFIG_ARC_PAGE_SIZE_4K=y
CONFIG_ARC_HUGEPAGE_2M=y
# CONFIG_ARC_HUGEPAGE_16M is not set
CONFIG_PGTABLE_LEVELS=2
CONFIG_ARC_FPU_SAVE_RESTORE=y
# CONFIG_ARC_HAS_LLSC is not set
# CONFIG_ARC_HAS_SWAPE is not set
# CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS is not set
# CONFIG_ARC_HAS_LL64 is not set
# CONFIG_ARC_HAS_DIV_REM is not set
CONFIG_ARC_HAS_ACCL_REGS=y
CONFIG_ARC_DSP_HANDLED=y
# CONFIG_ARC_DSP_NONE is not set
CONFIG_ARC_DSP_KERNEL=y
# CONFIG_ARC_DSP_USERSPACE is not set
# CONFIG_ARC_DSP_AGU_USERSPACE is not set
CONFIG_ARC_IRQ_NO_AUTOSAVE=y
# CONFIG_ARC_LPB_DISABLE is not set
# end of ARC CPU Configuration

CONFIG_LINUX_LINK_BASE=0x80000000
CONFIG_LINUX_RAM_BASE=0x80000000
CONFIG_HIGHMEM=y
# CONFIG_ARC_HAS_PAE40 is not set
CONFIG_ARC_KVADDR_SIZE=256
CONFIG_ARC_CURR_IN_REG=y
CONFIG_HZ=100
# CONFIG_ARC_METAWARE_HLINK is not set
# CONFIG_ARC_DBG is not set
CONFIG_ARC_BUILTIN_DTB_NAME=""
# end of ARC Architecture Configuration

CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_OF=y

#
# General architecture-dependent options
#
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_HAVE_ARCH_PFN_VALID=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_CGROUP_FC_APPID=y
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_ELFCORE=y
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#
# CONFIG_SWAP is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_BOUNCE=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_CMA is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
# CONFIG_NET_CLS_FLOWER is not set
CONFIG_NET_CLS_MATCHALL=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_SAMPLE=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_MPLS=y
# CONFIG_NET_ACT_VLAN is not set
CONFIG_NET_ACT_BPF=y
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_GATE=y
# CONFIG_NET_IFE_SKBMARK is not set
CONFIG_NET_IFE_SKBPRIO=y
# CONFIG_NET_IFE_SKBTCINDEX is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_QRTR=y
# CONFIG_QRTR_SMD is not set
CONFIG_QRTR_TUN=y
CONFIG_QRTR_MHI=y
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
# CONFIG_CAN_GW is not set
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HS is not set
# CONFIG_BT_LE is not set
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set

#
# Bluetooth device drivers
#
CONFIG_BT_MTK=y
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=y
CONFIG_BT_MTKUART=y
# CONFIG_BT_QCOMSMD is not set
CONFIG_BT_VIRTIO=y
# end of Bluetooth device drivers

# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
# CONFIG_CFG80211_REQUIRE_SIGNED_REGDB is not set
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""

#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_GPIO=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_VIRTUAL_NCI is not set
# CONFIG_NFC_FDP is not set
CONFIG_NFC_PN533=y
# CONFIG_NFC_PN533_I2C is not set
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
# CONFIG_NFC_NXP_NCI is not set
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
# CONFIG_NFC_S3FWRN82_UART is not set
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_I3C=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=y
# CONFIG_MHI_BUS_DEBUG is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol

CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_COREBOOT_TABLE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
CONFIG_MTD=y

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_OF_PARTS_BCM4908 is not set
# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
# CONFIG_FTL is not set
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_SPEAR_SMI=y
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_SAMSUNG is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
# CONFIG_MTD_RAW_NAND is not set

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_UBI is not set
CONFIG_MTD_HYPERBUS=y
# CONFIG_HBMC_AM654 is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=y
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8

#
# DRBD disabled because PROC_FS or INET not selected
#
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_PASSTHRU is not set
# CONFIG_NVME_TARGET_LOOP is not set
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_QCOM_COINCELL is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BCACHE_ASYNC_REGISTRATION=y
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support

# CONFIG_NETDEVICES is not set

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
# CONFIG_IPMI_IPMB is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=y
# CONFIG_HW_RANDOM is not set
CONFIG_DEVMEM=y
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_VTPM_PROXY=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DIGICOLOR is not set
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
CONFIG_I2C_KEMPLD=y
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support

CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
# CONFIG_SVC_I3C_MASTER is not set
CONFIG_MIPI_I3C_HCI=y
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
# CONFIG_PPS is not set

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AT91PIO4 is not set
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LPC18XX is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
# CONFIG_PINCTRL_PISTACHIO is not set
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
# CONFIG_PINCTRL_LOCHNAGAR is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set

#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers

# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
CONFIG_GPIO_SAMA5D2_PIOBU=y
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_XGENE_SB is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_KEMPLD is not set
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_STMPE=y
# CONFIG_GPIO_TPS65086 is not set
# CONFIG_GPIO_TPS65218 is not set
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# end of MFD GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_MXC is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=y
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_GSC=y
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31730=y
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_TPS23861 is not set
CONFIG_SENSORS_MENF21BMC_HWMON=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=y
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_MIPS is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_MADERA=y
# CONFIG_MFD_MADERA_I2C is not set
# CONFIG_MFD_CS47L15 is not set
CONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not set
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_IQS62X is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
# CONFIG_MFD_MT6370 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SY7636A is not set
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RT5120 is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SL28CPLD is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# end of STMicroelectronics STMPE Interface Drivers

# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
CONFIG_MFD_TQMX86=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
# CONFIG_MFD_WM8998 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
CONFIG_MFD_ROHM_BD957XMUF=y
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
CONFIG_REGULATOR_88PM800=y
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
# CONFIG_REGULATOR_AS3711 is not set
# CONFIG_REGULATOR_AS3722 is not set
CONFIG_REGULATOR_ATC260X=y
# CONFIG_REGULATOR_BD957XMUF is not set
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9055=y
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9063 is not set
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_FAN53880 is not set
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77686 is not set
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6331 is not set
# CONFIG_REGULATOR_MT6332 is not set
CONFIG_REGULATOR_MT6358=y
# CONFIG_REGULATOR_MT6359 is not set
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PF8X00 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
# CONFIG_REGULATOR_RT5033 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=y
# CONFIG_REGULATOR_RT6245 is not set
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
CONFIG_REGULATOR_STPMIC1=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS6286X is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
# CONFIG_REGULATOR_QCOM_LABIBB is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
CONFIG_FB_OMAP_LCD_H3=y
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
CONFIG_BACKLIGHT_LM3533=y
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_RT4831 is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_LP8788 is not set
# CONFIG_BACKLIGHT_AS3711 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_RAVE_SP=y
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support
# end of Graphics support

# CONFIG_SOUND is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
# CONFIG_LEDS_HARDWARE_CONTROL is not set

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8788 is not set
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=y
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_MENF21BMC is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXREG=y
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_LM3697 is not set
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_LM3601X=y
# CONFIG_LEDS_MT6360 is not set
CONFIG_LEDS_RT4505=y
# CONFIG_LEDS_RT8515 is not set
CONFIG_LEDS_SGM3140=y

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
# CONFIG_APPLE_ADMAC is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
# CONFIG_DMA_SUN6I is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_EP93XX_DMA is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_IMG_MDC_DMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_INTEL_IOP_ADMA is not set
# CONFIG_K3_DMA is not set
# CONFIG_MCF_EDMA is not set
# CONFIG_MILBEAUT_HDMAC is not set
# CONFIG_MILBEAUT_XDMAC is not set
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not set
# CONFIG_MV_XOR is not set
# CONFIG_MXS_DMA is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
# CONFIG_STM32_MDMA is not set
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
# CONFIG_TEGRA20_APB_DMA is not set
# CONFIG_TEGRA210_ADMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_UNIPHIER_MDMAC is not set
# CONFIG_UNIPHIER_XDMAC is not set
# CONFIG_XGENE_DMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
CONFIG_XILINX_ZYNQMP_DPDMA=y
# CONFIG_MTK_HSDMA is not set
# CONFIG_MTK_CQDMA is not set
# CONFIG_QCOM_ADM is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_RZN1_DMAMUX is not set
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
# CONFIG_SH_DMAE is not set
# CONFIG_RCAR_DMAC is not set
# CONFIG_RENESAS_USB_DMAC is not set
# CONFIG_RZ_DMAC is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
# CONFIG_LINEDISP is not set
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_CHARLCD_BL_OFF=y
# CONFIG_CHARLCD_BL_ON is not set
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_DFL=y
CONFIG_VFIO=y
# CONFIG_VFIO_NOIOMMU is not set
# CONFIG_VFIO_PLATFORM is not set
# CONFIG_VFIO_MDEV is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
CONFIG_VDPA=y
CONFIG_VDPA_SIM=y
CONFIG_VDPA_SIM_NET=y
# CONFIG_VDPA_SIM_BLOCK is not set
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=y
CONFIG_COMEDI_TEST=y
CONFIG_COMEDI_PARPORT=y
# CONFIG_COMEDI_SSV_DNP is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
# CONFIG_COMEDI_PCL724 is not set
# CONFIG_COMEDI_PCL726 is not set
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=y
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
# CONFIG_COMEDI_PCM3724 is not set
# CONFIG_COMEDI_AMPLC_DIO200_ISA is not set
# CONFIG_COMEDI_AMPLC_PC236_ISA is not set
CONFIG_COMEDI_AMPLC_PC263_ISA=y
# CONFIG_COMEDI_RTI800 is not set
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
# CONFIG_COMEDI_DAS16M1 is not set
# CONFIG_COMEDI_DAS08_ISA is not set
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
# CONFIG_COMEDI_DT2811 is not set
# CONFIG_COMEDI_DT2814 is not set
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=y
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=y
# CONFIG_COMEDI_FL512 is not set
# CONFIG_COMEDI_AIO_AIO12_8 is not set
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=y
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=y
# CONFIG_COMEDI_NI_AT_A2150 is not set
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
# CONFIG_COMEDI_NI_LABPC_ISA is not set
CONFIG_COMEDI_PCMAD=y
CONFIG_COMEDI_PCMDA12=y
# CONFIG_COMEDI_PCMMIO is not set
# CONFIG_COMEDI_PCMUIO is not set
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=y
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
# CONFIG_COMEDI_8255_SA is not set
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
# CONFIG_COMEDI_TESTS_NI_ROUTES is not set
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
CONFIG_CLK_SP810=y
# end of Clock driver for ARM Reference designs

CONFIG_CLK_HSDK=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PALMAS=y
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set

#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers

# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set

#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=y
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
# CONFIG_HWSPINLOCK_SPRD is not set
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
CONFIG_ARC_TIMERS=y
CONFIG_ARC_TIMERS_64BIT=y
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SPRD_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
# CONFIG_MESON_EE_PM_DOMAINS is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers

# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set

#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_SCPSYS_PM_DOMAINS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_PALMAS is not set
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=y
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y

#
# Accelerometers
#
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL367_I2C is not set
# CONFIG_ADXL372_I2C is not set
CONFIG_BMA180=y
# CONFIG_BMA400 is not set
# CONFIG_BMC150_ACCEL is not set
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
# CONFIG_FXLS8962AF_I2C is not set
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_KXSD9=y
CONFIG_KXSD9_I2C=y
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MSA311 is not set
CONFIG_MXC4005=y
# CONFIG_MXC6255 is not set
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7091R5=y
CONFIG_AD7291=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD799X=y
CONFIG_ADI_AXI_ADC=y
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not set
CONFIG_CC10001_ADC=y
CONFIG_DA9150_GPADC=y
CONFIG_ENVELOPE_DETECTOR=y
# CONFIG_EXYNOS_ADC is not set
# CONFIG_HX711 is not set
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
CONFIG_LP8788_ADC=y
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=y
CONFIG_LTC2497=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP3422=y
# CONFIG_MEDIATEK_MT6360_ADC is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
CONFIG_MEN_Z188_ADC=y
# CONFIG_MESON_SARADC is not set
CONFIG_MP2629_ADC=y
# CONFIG_NAU7802 is not set
# CONFIG_NPCM_ADC is not set
# CONFIG_PALMAS_GPADC is not set
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_RN5T618_ADC is not set
# CONFIG_ROCKCHIP_SARADC is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_ADC_CORE is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
CONFIG_STMPE_ADC=y
CONFIG_TI_ADC081C=y
# CONFIG_TI_ADS1015 is not set
CONFIG_TI_AM335X_ADC=y
CONFIG_VF610_ADC=y
# CONFIG_XILINX_XADC is not set
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_HMC425=y
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
# CONFIG_SCD30_CORE is not set
# CONFIG_SCD4X is not set
# CONFIG_SENSIRION_SGP30 is not set
# CONFIG_SENSIRION_SGP40 is not set
CONFIG_SPS30=y
# CONFIG_SPS30_I2C is not set
CONFIG_SPS30_SERIAL=y
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
CONFIG_AD5064=y
# CONFIG_AD5380 is not set
# CONFIG_AD5446 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
CONFIG_DPOT_DAC=y
# CONFIG_DS4424 is not set
# CONFIG_LPC18XX_DAC is not set
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=y
CONFIG_MCP4725=y
# CONFIG_STM32_DAC is not set
CONFIG_TI_DAC5571=y
CONFIG_VF610_DAC=y
# end of Digital to analog converters

#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
# CONFIG_FXAS21002C is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
CONFIG_HDC100X=y
# CONFIG_HDC2010 is not set
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
# CONFIG_BOSCH_BNO055_SERIAL is not set
# CONFIG_BOSCH_BNO055_I2C is not set
# CONFIG_FXOS8700_I2C is not set
CONFIG_KMX61=y
# CONFIG_INV_ICM42600_I2C is not set
# CONFIG_INV_MPU6050_I2C is not set
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
CONFIG_IIO_ST_LSM9DS0=y
CONFIG_IIO_ST_LSM9DS0_I2C=y
# end of Inertial measurement units

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=y
# CONFIG_AL3010 is not set
CONFIG_AL3320A=y
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=y
# CONFIG_CM36651 is not set
# CONFIG_GP2AP002 is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_IQS621_ALS is not set
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
CONFIG_LTR501=y
# CONFIG_LTRF216A is not set
# CONFIG_LV0104CS is not set
CONFIG_MAX44000=y
# CONFIG_MAX44009 is not set
CONFIG_NOA1305=y
# CONFIG_OPT3001 is not set
# CONFIG_PA12203001 is not set
# CONFIG_SI1133 is not set
CONFIG_SI1145=y
CONFIG_STK3310=y
# CONFIG_ST_UVIS25 is not set
# CONFIG_TCS3414 is not set
CONFIG_TCS3472=y
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
# CONFIG_VCNL4000 is not set
# CONFIG_VCNL4035 is not set
# CONFIG_VEML6030 is not set
CONFIG_VEML6070=y
# CONFIG_VL6180 is not set
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
CONFIG_AK09911=y
# CONFIG_BMC150_MAGN_I2C is not set
CONFIG_MAG3110=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
# CONFIG_SENSORS_RM3100_I2C is not set
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

CONFIG_IIO_FORMAT_KUNIT_TEST=y

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
# CONFIG_IIO_TIGHTLOOP_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=y
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
# CONFIG_MAX5432 is not set
CONFIG_MCP4018=y
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_DLHL60D=y
# CONFIG_DPS310 is not set
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
# CONFIG_MS5637 is not set
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=y
# CONFIG_MB1232 is not set
# CONFIG_PING is not set
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
# CONFIG_MLX90614 is not set
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TMP117=y
CONFIG_TSYS01=y
# CONFIG_TSYS02D is not set
# end of Temperature sensors

CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
# CONFIG_PWM_ATMEL is not set
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_EP93XX is not set
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
CONFIG_PWM_LP3943=y
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
# CONFIG_PWM_NTXEC is not set
# CONFIG_PWM_OMAP_DMTIMER is not set
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
CONFIG_PWM_STMPE=y
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set
# CONFIG_PWM_XILINX is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_DW_APB_ICTL=y
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
CONFIG_RESET_AXS10X=y
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
CONFIG_RESET_HSDK=y
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_TORRENT=y
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
CONFIG_PHY_CADENCE_SIERRA=y
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
CONFIG_PHY_MIXEL_MIPI_DPHY=y
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_LAN966X_SERDES is not set
CONFIG_PHY_OCELOT_SERDES=y
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
# CONFIG_DTPM is not set
CONFIG_MCB=y
CONFIG_MCB_LPC=y
# CONFIG_RAS is not set

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_BINDERFS is not set
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android

CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_RAVE_SP_EEPROM is not set
CONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_U_BOOT_ENV is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set

#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

CONFIG_FPGA=y
# CONFIG_FPGA_MGR_SOCFPGA is not set
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not set
# CONFIG_ALTERA_PR_IP_CORE is not set
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not set
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
# CONFIG_XILINX_PR_DECOUPLER is not set
CONFIG_FPGA_REGION=y
# CONFIG_OF_FPGA_REGION is not set
CONFIG_FPGA_DFL=y
# CONFIG_FPGA_DFL_AFU is not set
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=y
# CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set
# CONFIG_FPGA_MGR_VERSAL_FPGA is not set
CONFIG_FSI=y
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
# CONFIG_FSI_OCC is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
CONFIG_MOST=y
CONFIG_MOST_CDEV=y
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT2 is not set
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not set
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not set
CONFIG_F2FS_FS_LZ4=y
# CONFIG_F2FS_FS_LZ4HC is not set
# CONFIG_F2FS_FS_ZSTD is not set
CONFIG_F2FS_IOSTAT=y
# CONFIG_F2FS_UNFAIR_RWSEM is not set
CONFIG_ZONEFS_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not set
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_ENCRYPTION_INLINE_CRYPT is not set
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_FAT_KUNIT_TEST=y
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
CONFIG_NTFS3_FS=y
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPUMASK_OFFSTACK=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines

CONFIG_ASN1_ENCODER=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
# CONFIG_SYMBOLIC_ERRNAME is not set
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
CONFIG_DEBUG_INFO_DWARF5=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_VMLINUX_MAP=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
CONFIG_DEBUG_FS_ALLOW_NONE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
# CONFIG_KGDB_KDB is not set
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
CONFIG_UBSAN_UNREACHABLE=y
CONFIG_UBSAN_BOOL=y
# CONFIG_UBSAN_ENUM is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_DEBUG_KMAP_LOCAL is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_SCALE_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_USER_EVENTS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_GCOV_PROFILE_FTRACE=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_STARTUP_TEST=y
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# arc Debugging
#
# CONFIG_16KSTACKS is not set
# end of arc Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAULT_INJECTION_USERCOPY is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
# CONFIG_TEST_MIN_HEAP is not set
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_TEST_REF_TRACKER is not set
CONFIG_RBTREE_TEST=y
# CONFIG_REED_SOLOMON_TEST is not set
CONFIG_INTERVAL_TREE_TEST=y
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_HEXDUMP=y
# CONFIG_STRING_SELFTEST is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_RHASHTABLE=y
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
CONFIG_FIND_BIT_BENCHMARK=y
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_SYSCTL=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
# CONFIG_LINEAR_RANGES_TEST is not set
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_SLUB_KUNIT_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_TEST_UDELAY=y
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_FREE_PAGES=y
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking

Re: [PATCH v7 01/11] leds: add support for hardware driven LEDs

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 5551 bytes --]

Hi Christian,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on pavel-leds/for-next]
[also build test ERROR on robh/for-next net-next/master net/master linus/master v6.1 next-20221215]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Christian-Marangi/Adds-support-for-PHY-LEDs-with-offload-triggers/20221215-080414
base:   git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git for-next
patch link:    https://lore.kernel.org/r/20221214235438.30271-2-ansuelsmth%40gmail.com
patch subject: [PATCH v7 01/11] leds: add support for hardware driven LEDs
config: riscv-randconfig-r001-20221214
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 98b13979fb05f3ed288a900deb843e7b27589e58)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install riscv cross compiling tool for clang build
        # apt-get install binutils-riscv-linux-gnu
        # https://github.com/intel-lab-lkp/linux/commit/f714ac6012266bf89c4c1b7d5e6ebaf50d4c525c
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Christian-Marangi/Adds-support-for-PHY-LEDs-with-offload-triggers/20221215-080414
        git checkout f714ac6012266bf89c4c1b7d5e6ebaf50d4c525c
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=riscv SHELL=/bin/bash drivers/leds/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/leds/led-triggers.c:205:17: error: no member named 'hw_control_status' in 'struct led_classdev'
                       led_cdev->hw_control_status(led_cdev))
                       ~~~~~~~~  ^
>> drivers/leds/led-triggers.c:206:14: error: no member named 'hw_control_stop' in 'struct led_classdev'
                           led_cdev->hw_control_stop(led_cdev);
                           ~~~~~~~~  ^
   2 errors generated.


vim +205 drivers/leds/led-triggers.c

   177	
   178	/* Caller must ensure led_cdev->trigger_lock held */
   179	int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
   180	{
   181		char *event = NULL;
   182		char *envp[2];
   183		const char *name;
   184		int ret;
   185	
   186		if (!led_cdev->trigger && !trig)
   187			return 0;
   188	
   189		name = trig ? trig->name : "none";
   190		event = kasprintf(GFP_KERNEL, "TRIGGER=%s", name);
   191	
   192		/* Remove any existing trigger */
   193		if (led_cdev->trigger) {
   194			spin_lock(&led_cdev->trigger->leddev_list_lock);
   195			list_del_rcu(&led_cdev->trig_list);
   196			spin_unlock(&led_cdev->trigger->leddev_list_lock);
   197	
   198			/* ensure it's no longer visible on the led_cdevs list */
   199			synchronize_rcu();
   200	
   201			cancel_work_sync(&led_cdev->set_brightness_work);
   202			led_stop_software_blink(led_cdev);
   203			/* Disable hardware mode on trigger change if supported */
   204			if (led_cdev->blink_mode != SOFTWARE_CONTROLLED &&
 > 205			    led_cdev->hw_control_status(led_cdev))
 > 206				led_cdev->hw_control_stop(led_cdev);
   207			if (led_cdev->trigger->deactivate)
   208				led_cdev->trigger->deactivate(led_cdev);
   209			device_remove_groups(led_cdev->dev, led_cdev->trigger->groups);
   210			led_cdev->trigger = NULL;
   211			led_cdev->trigger_data = NULL;
   212			led_cdev->activated = false;
   213			led_set_brightness(led_cdev, LED_OFF);
   214		}
   215		if (trig) {
   216			/* Make sure the trigger support the LED blink mode */
   217			if (!led_trigger_is_supported(led_cdev, trig))
   218				return -EINVAL;
   219	
   220			spin_lock(&trig->leddev_list_lock);
   221			list_add_tail_rcu(&led_cdev->trig_list, &trig->led_cdevs);
   222			spin_unlock(&trig->leddev_list_lock);
   223			led_cdev->trigger = trig;
   224	
   225			if (trig->activate)
   226				ret = trig->activate(led_cdev);
   227			else
   228				ret = 0;
   229	
   230			if (ret)
   231				goto err_activate;
   232	
   233			ret = device_add_groups(led_cdev->dev, trig->groups);
   234			if (ret) {
   235				dev_err(led_cdev->dev, "Failed to add trigger attributes\n");
   236				goto err_add_groups;
   237			}
   238		}
   239	
   240		if (event) {
   241			envp[0] = event;
   242			envp[1] = NULL;
   243			if (kobject_uevent_env(&led_cdev->dev->kobj, KOBJ_CHANGE, envp))
   244				dev_err(led_cdev->dev,
   245					"%s: Error sending uevent\n", __func__);
   246			kfree(event);
   247		}
   248	
   249		return 0;
   250	
   251	err_add_groups:
   252	
   253		if (trig->deactivate)
   254			trig->deactivate(led_cdev);
   255	err_activate:
   256	
   257		spin_lock(&led_cdev->trigger->leddev_list_lock);
   258		list_del_rcu(&led_cdev->trig_list);
   259		spin_unlock(&led_cdev->trigger->leddev_list_lock);
   260		synchronize_rcu();
   261		led_cdev->trigger = NULL;
   262		led_cdev->trigger_data = NULL;
   263		led_set_brightness(led_cdev, LED_OFF);
   264		kfree(event);
   265	
   266		return ret;
   267	}
   268	EXPORT_SYMBOL_GPL(led_trigger_set);
   269	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 140238 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/riscv 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project 98b13979fb05f3ed288a900deb843e7b27589e58)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=160000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=160000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=160000
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_TIME_KUNIT_TEST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
# CONFIG_CGROUPS is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
# CONFIG_POSIX_TIMERS is not set
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_32BIT=y
CONFIG_RISCV=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_RISCV_SBI=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RISCV_DMA_NONCOHERENT=y
CONFIG_AS_HAS_INSN=y

#
# SoC selection
#
CONFIG_SOC_MICROCHIP_POLARFIRE=y
# CONFIG_SOC_SIFIVE is not set
# CONFIG_SOC_STARFIVE is not set
# CONFIG_SOC_VIRT is not set
# end of SoC selection

#
# CPU errata selection
#
# CONFIG_ERRATA_SIFIVE is not set
# CONFIG_ERRATA_THEAD is not set
# end of CPU errata selection

#
# Platform type
#
CONFIG_NONPORTABLE=y
CONFIG_ARCH_RV32I=y
# CONFIG_ARCH_RV64I is not set
# CONFIG_CMODEL_MEDLOW is not set
CONFIG_CMODEL_MEDANY=y
# CONFIG_SMP is not set
CONFIG_TUNE_GENERIC=y
CONFIG_RISCV_ALTERNATIVE=y
CONFIG_RISCV_ISA_C=y
CONFIG_CC_HAS_ZICBOM=y
CONFIG_RISCV_ISA_ZICBOM=y
# CONFIG_FPU is not set
# end of Platform type

#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_RISCV_SBI_V01 is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# end of Kernel features

#
# Boot options
#
CONFIG_CMDLINE=""
CONFIG_EFI_STUB=y
CONFIG_EFI=y
CONFIG_PHYS_RAM_BASE_FIXED=y
CONFIG_PHYS_RAM_BASE=0x80000000
# end of Boot options

#
# Power management options
#
# CONFIG_PM is not set
# end of Power management options

#
# CPU Power Management
#

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPU Power Management

# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
# CONFIG_STRICT_KERNEL_RWX is not set
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_MMIOWB=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_PAGE_IDLE_FLAG=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_KUNIT_TEST=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_VADDR_KUNIT_TEST=y
# CONFIG_DAMON_SYSFS is not set
# CONFIG_DAMON_DBGFS is not set
CONFIG_DAMON_RECLAIM=y
# CONFIG_DAMON_LRU_SORT is not set
# end of Data Access Monitoring
# end of Memory Management options

# CONFIG_NET is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set

#
# PC-card bridges
#

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_UPLOAD=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_INTEGRATOR_LM=y
CONFIG_BT1_APB=y
# CONFIG_BT1_AXI is not set
CONFIG_HISILICON_LPC=y
CONFIG_INTEL_IXP4XX_EB=y
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_MSG=y
# CONFIG_ARM_SCMI_TRANSPORT_MAILBOX is not set
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE=y
# CONFIG_ARM_SCMI_POWER_DOMAIN is not set
CONFIG_ARM_SCMI_POWER_CONTROL=y
# end of ARM System Control and Management Interface Protocol

# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_TURRIS_MOX_RWTM is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_COREBOOT_TABLE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_PARAMS_FROM_FDT=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB=y
# CONFIG_EFI_ZBOOT is not set
CONFIG_EFI_BOOTLOADER_CONTROL=y
# CONFIG_EFI_CAPSULE_LOADER is not set
CONFIG_EFI_TEST=y
CONFIG_RESET_ATTACK_MITIGATION=y
CONFIG_EFI_RCI2_TABLE=y
CONFIG_EFI_DISABLE_PCI_DMA=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
CONFIG_EFI_COCO_SECRET=y
# end of EFI (Extensible Firmware Interface) Support

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
# CONFIG_GNSS_UBX_SERIAL is not set
CONFIG_GNSS_USB=y
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
# CONFIG_OF_DYNAMIC is not set
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_DMA_DEFAULT_COHERENT=y
# CONFIG_PARPORT is not set

#
# NVME Support
#
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HI6421V600_IRQ=y
CONFIG_QCOM_COINCELL=y
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
CONFIG_MISC_RTSX_USB=y
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
# end of SCSI device support

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# end of IEEE 1394 (FireWire) support

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_CLPS711X is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_EP93XX=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
CONFIG_KEYBOARD_IMX=y
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_PINEPHONE is not set
CONFIG_KEYBOARD_PMIC8XXX=y
CONFIG_KEYBOARD_SAMSUNG=y
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_KEYBOARD_STMPE=y
# CONFIG_KEYBOARD_IQS62X is not set
CONFIG_KEYBOARD_OMAP4=y
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_MT6779 is not set
# CONFIG_KEYBOARD_MTK_PMIC is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_BYD is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS is not set
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_FOCALTECH is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
# CONFIG_MOUSE_ELAN_I2C_I2C is not set
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_JOYSTICK_PXRC=y
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
CONFIG_TOUCHSCREEN_AR1021_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
# CONFIG_TOUCHSCREEN_HIDEEP is not set
CONFIG_TOUCHSCREEN_HYCON_HY46XX=y
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_IPROC is not set
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
# CONFIG_TOUCHSCREEN_MSG2638 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMAGIS=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=y
CONFIG_TOUCHSCREEN_MIGOR=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_MX25 is not set
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
# CONFIG_TOUCHSCREEN_USB_3M is not set
# CONFIG_TOUCHSCREEN_USB_ITM is not set
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TS4800 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
CONFIG_TOUCHSCREEN_STMPE=y
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_TOUCHSCREEN_ZET6223 is not set
CONFIG_TOUCHSCREEN_ZFORCE=y
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_TOUCHSCREEN_IQS5XX=y
CONFIG_TOUCHSCREEN_ZINITIX=y
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
CONFIG_SERIO_SUN4I_PS2=y
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_BCM2835=y
# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
# CONFIG_HW_RANDOM_IXP4XX is not set
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_IMX_RNGC is not set
CONFIG_HW_RANDOM_NOMADIK=y
# CONFIG_HW_RANDOM_STM32 is not set
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=y
# CONFIG_HW_RANDOM_KEYSTONE is not set
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_DEVMEM=y
# CONFIG_TCG_TPM is not set
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
# CONFIG_XILLYBUS_OF is not set
CONFIG_XILLYUSB=y
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_DEMUX_PINCTRL is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
# CONFIG_I2C_ASPEED is not set
CONFIG_I2C_AT91=y
CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL=y
CONFIG_I2C_AXXIA=y
CONFIG_I2C_BCM2835=y
# CONFIG_I2C_BCM_IPROC is not set
CONFIG_I2C_BCM_KONA=y
# CONFIG_I2C_BRCMSTB is not set
CONFIG_I2C_CADENCE=y
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DAVINCI=y
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DIGICOLOR=y
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_HIGHLANDER=y
CONFIG_I2C_HISI=y
CONFIG_I2C_IMG=y
# CONFIG_I2C_IMX is not set
CONFIG_I2C_IMX_LPI2C=y
# CONFIG_I2C_IOP3XX is not set
CONFIG_I2C_JZ4780=y
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
CONFIG_I2C_MT7621=y
# CONFIG_I2C_MV64XXX is not set
CONFIG_I2C_MXS=y
CONFIG_I2C_NPCM=y
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
CONFIG_I2C_APPLE=y
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_PNX=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=y
# CONFIG_I2C_QUP is not set
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_RZV2M=y
CONFIG_I2C_S3C2410=y
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
CONFIG_I2C_STM32F4=y
CONFIG_I2C_STM32F7=y
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_SYNQUACER=y
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
CONFIG_I2C_VERSATILE=y
CONFIG_I2C_WMT=y
# CONFIG_I2C_XILINX is not set
CONFIG_I2C_XLP9XX=y
CONFIG_I2C_RCAR=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_CP2615=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

CONFIG_I3C=y
# CONFIG_CDNS_I3C_MASTER is not set
# CONFIG_DW_I3C_MASTER is not set
CONFIG_SVC_I3C_MASTER=y
CONFIG_MIPI_I3C_HCI=y
# CONFIG_SPI is not set
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_SPMI_MTK_PMIF=y
# CONFIG_HSI is not set
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AT91PIO4 is not set
CONFIG_PINCTRL_AXP209=y
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
CONFIG_PINCTRL_DA850_PUPD=y
CONFIG_PINCTRL_EQUILIBRIUM=y
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_PISTACHIO is not set
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_ROCKCHIP is not set
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_STMFX is not set
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_OWL is not set
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
CONFIG_PINCTRL_ASPEED_G6=y
# CONFIG_PINCTRL_BCM281XX is not set
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_BCM4908=y
CONFIG_PINCTRL_BCM63XX=y
# CONFIG_PINCTRL_BCM6318 is not set
CONFIG_PINCTRL_BCM6328=y
# CONFIG_PINCTRL_BCM6358 is not set
CONFIG_PINCTRL_BCM6362=y
CONFIG_PINCTRL_BCM6368=y
CONFIG_PINCTRL_BCM63268=y
# CONFIG_PINCTRL_IPROC_GPIO is not set
CONFIG_PINCTRL_CYGNUS_MUX=y
# CONFIG_PINCTRL_NS is not set
CONFIG_PINCTRL_NSP_GPIO=y
# CONFIG_PINCTRL_NS2_MUX is not set
CONFIG_PINCTRL_NSP_MUX=y
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
# CONFIG_PINCTRL_LOCHNAGAR is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L90=y

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
# CONFIG_PINCTRL_MT2701 is not set
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MT8135=y
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
# CONFIG_PINCTRL_MT6765 is not set
CONFIG_PINCTRL_MT6779=y
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
CONFIG_PINCTRL_MT8188=y
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers

# CONFIG_PINCTRL_MESON is not set
CONFIG_PINCTRL_WPCM450=y
CONFIG_PINCTRL_NPCM7XX=y
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
# CONFIG_PINCTRL_APQ8084 is not set
# CONFIG_PINCTRL_IPQ4019 is not set
# CONFIG_PINCTRL_IPQ8064 is not set
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_MSM8226=y
CONFIG_PINCTRL_MSM8660=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MDM9607=y
CONFIG_PINCTRL_MDM9615=y
CONFIG_PINCTRL_MSM8X74=y
# CONFIG_PINCTRL_MSM8909 is not set
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
# CONFIG_PINCTRL_MSM8976 is not set
# CONFIG_PINCTRL_MSM8994 is not set
# CONFIG_PINCTRL_MSM8996 is not set
CONFIG_PINCTRL_MSM8998=y
CONFIG_PINCTRL_QCM2290=y
# CONFIG_PINCTRL_QCS404 is not set
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=y
# CONFIG_PINCTRL_SC8180X is not set
CONFIG_PINCTRL_SC8280XP=y
CONFIG_PINCTRL_SDM660=y
# CONFIG_PINCTRL_SDM845 is not set
CONFIG_PINCTRL_SDX55=y
CONFIG_PINCTRL_SM6115=y
# CONFIG_PINCTRL_SM6125 is not set
CONFIG_PINCTRL_SM6350=y
CONFIG_PINCTRL_SM6375=y
CONFIG_PINCTRL_SDX65=y
CONFIG_PINCTRL_SM8150=y
# CONFIG_PINCTRL_SM8250 is not set
CONFIG_PINCTRL_SM8250_LPASS_LPI=y
# CONFIG_PINCTRL_SM8350 is not set
# CONFIG_PINCTRL_SM8450 is not set
CONFIG_PINCTRL_SM8450_LPASS_LPI=y
# CONFIG_PINCTRL_SC8280XP_LPASS_LPI is not set
CONFIG_PINCTRL_LPASS_LPI=y

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
# CONFIG_PINCTRL_PFC_R8A7779 is not set
CONFIG_PINCTRL_PFC_R8A7790=y
CONFIG_PINCTRL_PFC_R8A77950=y
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
CONFIG_PINCTRL_PFC_R8A7793=y
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
CONFIG_PINCTRL_PFC_R8A7792=y
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
CONFIG_PINCTRL_PFC_R8A7740=y
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_RZG2L=y
CONFIG_PINCTRL_PFC_R8A77470=y
CONFIG_PINCTRL_PFC_R8A7745=y
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
CONFIG_PINCTRL_PFC_R8A774A1=y
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
CONFIG_PINCTRL_RZN1=y
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
CONFIG_PINCTRL_PFC_SH7269=y
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
CONFIG_PINCTRL_PFC_SH7757=y
CONFIG_PINCTRL_PFC_SH7785=y
# CONFIG_PINCTRL_PFC_SH7786 is not set
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
# CONFIG_PINCTRL_EXYNOS_ARM is not set
# CONFIG_PINCTRL_EXYNOS_ARM64 is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
CONFIG_PINCTRL_STM32=y
# CONFIG_PINCTRL_STM32F429 is not set
CONFIG_PINCTRL_STM32F469=y
# CONFIG_PINCTRL_STM32F746 is not set
CONFIG_PINCTRL_STM32F769=y
# CONFIG_PINCTRL_STM32H743 is not set
CONFIG_PINCTRL_STM32MP135=y
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=y
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
CONFIG_PINCTRL_UNIPHIER_PXS3=y
CONFIG_PINCTRL_UNIPHIER_NX1=y
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_ASPEED=y
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
CONFIG_GPIO_RASPBERRYPI_EXP=y
# CONFIG_GPIO_BCM_KONA is not set
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_BRCMSTB=y
# CONFIG_GPIO_CADENCE is not set
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EIC_SPRD=y
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
# CONFIG_GPIO_LPC18XX is not set
CONFIG_GPIO_LPC32XX=y
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MXC=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PMIC_EIC_SPRD=y
CONFIG_GPIO_PXA=y
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
CONFIG_GPIO_SAMA5D2_PIOBU=y
# CONFIG_GPIO_SIFIVE is not set
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=y
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=y
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_UNIPHIER=y
# CONFIG_GPIO_VISCONTI is not set
CONFIG_GPIO_WCD934X=y
# CONFIG_GPIO_XGENE_SB is not set
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_XLP=y
# CONFIG_GPIO_AMD_FCH is not set
CONFIG_GPIO_IDT3243X=y
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_LP873X is not set
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_MAX77650 is not set
# CONFIG_GPIO_RC5T583 is not set
# CONFIG_GPIO_SL28CPLD is not set
# CONFIG_GPIO_STMPE is not set
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS65218 is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TQMX86=y
# end of MFD GPIO expanders

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_MXC is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2438 is not set
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_AS3722 is not set
CONFIG_POWER_RESET_BRCMKONA=y
CONFIG_POWER_RESET_BRCMSTB=y
# CONFIG_POWER_RESET_GEMINI_POWEROFF is not set
# CONFIG_POWER_RESET_GPIO is not set
CONFIG_POWER_RESET_GPIO_RESTART=y
# CONFIG_POWER_RESET_OCELOT_RESET is not set
# CONFIG_POWER_RESET_LTC2952 is not set
CONFIG_POWER_RESET_MT6323=y
# CONFIG_POWER_RESET_REGULATOR is not set
CONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_RESET_TPS65086 is not set
# CONFIG_POWER_RESET_KEYSTONE is not set
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_REBOOT_MODE=y
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_POWER_RESET_SC27XX=y
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
# CONFIG_IP5XXX_POWER is not set
# CONFIG_MAX8925_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_88PM860X is not set
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
# CONFIG_BATTERY_CW2015 is not set
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_DA9150=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_ISP1704=y
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_MAX14577=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77650 is not set
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ2515X is not set
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_RK817=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_CHARGER_TPS65217=y
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
# CONFIG_CHARGER_RT9455 is not set
CONFIG_CHARGER_SC2731=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
CONFIG_BATTERY_ACER_A500=y
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
# CONFIG_HISI_THERMAL is not set
CONFIG_IMX_THERMAL=y
CONFIG_IMX8MM_THERMAL=y
# CONFIG_K3_THERMAL is not set
CONFIG_MAX77620_THERMAL=y
CONFIG_QORIQ_THERMAL=y
CONFIG_SPEAR_THERMAL=y
CONFIG_SUN8I_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_RCAR_GEN3_THERMAL=y
CONFIG_RZG2L_THERMAL=y
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
CONFIG_ARMADA_THERMAL=y
CONFIG_DA9062_THERMAL=y
CONFIG_MTK_THERMAL=y

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=y
# CONFIG_BCM2835_THERMAL is not set
CONFIG_BRCMSTB_THERMAL=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y
# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=y
CONFIG_TEGRA_BPMP_THERMAL=y
CONFIG_TEGRA30_TSENSOR=y
# end of NVIDIA Tegra thermal drivers

#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_TSENS is not set
# end of Qualcomm thermal drivers

# CONFIG_UNIPHIER_THERMAL is not set
CONFIG_SPRD_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_PFLASH=y
# CONFIG_BCMA_SFLASH is not set
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_MADERA=y
# CONFIG_MFD_MADERA_I2C is not set
# CONFIG_MFD_CS47L15 is not set
# CONFIG_MFD_CS47L35 is not set
# CONFIG_MFD_CS47L85 is not set
CONFIG_MFD_CS47L90=y
# CONFIG_MFD_CS47L92 is not set
CONFIG_MFD_ASIC3=y
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
# CONFIG_MFD_DA9062 is not set
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_DLN2 is not set
CONFIG_MFD_ENE_KB3930=y
CONFIG_MFD_EXYNOS_LPASS=y
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
CONFIG_MFD_MX25_TSADC=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI6421_SPMI=y
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
CONFIG_MFD_IQS62X=y
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77714=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
# CONFIG_PCF50633_GPIO is not set
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SY7636A=y
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=y
CONFIG_MFD_RT5120=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# end of STMicroelectronics STMPE Interface Drivers

# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_OMAP_USB_HOST=y
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
CONFIG_MFD_TQMX86=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_CS47L24 is not set
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_STW481X=y
CONFIG_MFD_ROHM_BD718XX=y
# CONFIG_MFD_ROHM_BD71828 is not set
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STM32_LPTIMER=y
CONFIG_MFD_STM32_TIMERS=y
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
CONFIG_MFD_WCD934X=y
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
CONFIG_MFD_ACER_A500_EC=y
CONFIG_MFD_QCOM_PM8008=y
# CONFIG_RAVE_SP_CORE is not set
CONFIG_MFD_RSMU_I2C=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARM_SCMI=y
# CONFIG_REGULATOR_AS3722 is not set
# CONFIG_REGULATOR_AXP20X is not set
CONFIG_REGULATOR_BD718XX=y
# CONFIG_REGULATOR_BD957XMUF is not set
CONFIG_REGULATOR_DA9055=y
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9121=y
# CONFIG_REGULATOR_DA9210 is not set
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_FAN53880 is not set
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI6421V600=y
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LM363X=y
# CONFIG_REGULATOR_LOCHNAGAR is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP873X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX14577 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
# CONFIG_REGULATOR_MAX8925 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8973=y
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=y
# CONFIG_REGULATOR_MAX77826 is not set
# CONFIG_REGULATOR_MCP16502 is not set
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
# CONFIG_REGULATOR_MP886X is not set
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
# CONFIG_REGULATOR_MT6315 is not set
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6331=y
CONFIG_REGULATOR_MT6332=y
# CONFIG_REGULATOR_MT6358 is not set
# CONFIG_REGULATOR_MT6359 is not set
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6370=y
CONFIG_REGULATOR_MT6380=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PCF50633 is not set
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PV88060 is not set
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RC5T583=y
# CONFIG_REGULATOR_RK808 is not set
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5120=y
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=y
# CONFIG_REGULATOR_RT6245 is not set
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SC2731=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
CONFIG_REGULATOR_STM32_PWR=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_STW481X_VMMC=y
# CONFIG_REGULATOR_SY7636A is not set
# CONFIG_REGULATOR_SY8106A is not set
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS68470=y
# CONFIG_REGULATOR_UNIPHIER is not set
CONFIG_REGULATOR_VCTRL=y
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_RC_CORE=y
# CONFIG_LIRC is not set
# CONFIG_RC_MAP is not set
# CONFIG_RC_DECODERS is not set
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=y
# CONFIG_IR_FINTEK is not set
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_HIX5HD2=y
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
CONFIG_IR_IMON=y
CONFIG_IR_IMON_RAW=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_MESON=y
CONFIG_IR_MESON_TX=y
CONFIG_IR_MTK=y
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
CONFIG_IR_RX51=y
CONFIG_IR_SERIAL=y
# CONFIG_IR_SERIAL_TRANSMITTER is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_SUNXI is not set
CONFIG_IR_TOY=y
CONFIG_IR_TTUSBIR=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_RC_LOOPBACK=y
CONFIG_RC_ST=y
CONFIG_RC_XBOX_DVD=y
CONFIG_IR_IMG=y
# CONFIG_IR_IMG_RAW is not set
CONFIG_IR_IMG_HW=y
# CONFIG_IR_IMG_NEC is not set
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
# CONFIG_IR_IMG_SHARP is not set
# CONFIG_IR_IMG_SANYO is not set
CONFIG_IR_IMG_RC5=y
CONFIG_IR_IMG_RC6=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
CONFIG_CEC_MESON_AO=y
CONFIG_CEC_MESON_G12A_AO=y
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
CONFIG_CEC_TEGRA=y
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y
# end of Media core support

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_H264=y
CONFIG_V4L2_VP9=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not set
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options

#
# Media drivers
#

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_SHARK is not set
CONFIG_RADIO_SHARK2=y
CONFIG_RADIO_SI4713=y
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_WL1273=y
# CONFIG_USB_DSBR is not set
CONFIG_USB_KEENE=y
CONFIG_USB_MA901=y
# CONFIG_USB_MR800 is not set
# CONFIG_USB_RAREMONO is not set
CONFIG_RADIO_SI470X=y
# CONFIG_USB_SI470X is not set
CONFIG_I2C_SI470X=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_VIDEO_MUX=y

#
# Allegro DVT media platform drivers
#

#
# Amlogic media platform drivers
#

#
# Amphion drivers
#

#
# Aspeed media platform drivers
#
CONFIG_VIDEO_ASPEED=y

#
# Atmel media platform drivers
#
CONFIG_VIDEO_ATMEL_ISC=y
# CONFIG_VIDEO_ATMEL_XISC is not set
CONFIG_VIDEO_ATMEL_ISC_BASE=y
CONFIG_VIDEO_ATMEL_ISI=y
# CONFIG_VIDEO_MICROCHIP_CSI2DC is not set

#
# Cadence media platform drivers
#
# CONFIG_VIDEO_CADENCE_CSI2RX is not set
CONFIG_VIDEO_CADENCE_CSI2TX=y

#
# Chips&Media media platform drivers
#

#
# Intel media platform drivers
#
CONFIG_VIDEO_PXA27x=y

#
# Marvell media platform drivers
#
# CONFIG_VIDEO_MMP_CAMERA is not set

#
# Mediatek media platform drivers
#
# CONFIG_VIDEO_MEDIATEK_MDP3 is not set

#
# NVidia media platform drivers
#

#
# NXP media platform drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=y

#
# Qualcomm media platform drivers
#
CONFIG_VIDEO_QCOM_CAMSS=y

#
# Renesas media platform drivers
#
CONFIG_VIDEO_RENESAS_CEU=y
CONFIG_VIDEO_RCAR_ISP=y
CONFIG_VIDEO_SH_VOU=y
# CONFIG_VIDEO_RCAR_CSI2 is not set
# CONFIG_VIDEO_RCAR_VIN is not set
# CONFIG_VIDEO_RCAR_DRIF is not set

#
# Rockchip media platform drivers
#
CONFIG_VIDEO_ROCKCHIP_ISP1=y

#
# Samsung media platform drivers
#
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=y
CONFIG_VIDEO_EXYNOS4_IS_COMMON=y
CONFIG_VIDEO_S5P_FIMC=y
# CONFIG_VIDEO_S5P_MIPI_CSIS is not set
# CONFIG_VIDEO_EXYNOS_FIMC_LITE is not set
# CONFIG_VIDEO_EXYNOS4_FIMC_IS is not set

#
# STMicroelectronics media platform drivers
#
CONFIG_DVB_C8SECTPFE=y
CONFIG_VIDEO_STM32_DCMI=y

#
# Sunxi media platform drivers
#
CONFIG_VIDEO_SUN4I_CSI=y
# CONFIG_VIDEO_SUN6I_CSI is not set

#
# Texas Instruments drivers
#
CONFIG_VIDEO_TI_CAL=y
# CONFIG_VIDEO_TI_CAL_MC is not set
CONFIG_VIDEO_AM437X_VPFE=y
CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=y
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=y
# CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY is not set
CONFIG_VIDEO_OMAP2_VOUT_VRFB=y
CONFIG_VIDEO_OMAP2_VOUT=y
# CONFIG_VIDEO_OMAP3 is not set

#
# Verisilicon media platform drivers
#

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
CONFIG_VIDEO_XILINX=y
CONFIG_VIDEO_XILINX_CSI2RXSS=y
# CONFIG_VIDEO_XILINX_TPG is not set
# CONFIG_VIDEO_XILINX_VTC is not set

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIM2M is not set
CONFIG_VIDEO_VICODEC=y
CONFIG_VIDEO_VIMC=y
# CONFIG_VIDEO_VIVID is not set
# CONFIG_DVB_TEST_DRIVERS is not set

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_SMS_SIANO_MDTV=y
# CONFIG_SMS_SIANO_RC is not set
CONFIG_VIDEO_V4L2_TPG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
# end of Media drivers

#
# Media ancillary drivers
#

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=y

#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_CCS_PLL=y
CONFIG_VIDEO_AR0521=y
CONFIG_VIDEO_HI556=y
CONFIG_VIDEO_HI846=y
# CONFIG_VIDEO_HI847 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
CONFIG_VIDEO_IMX219=y
CONFIG_VIDEO_IMX258=y
CONFIG_VIDEO_IMX274=y
CONFIG_VIDEO_IMX290=y
CONFIG_VIDEO_IMX319=y
CONFIG_VIDEO_IMX334=y
CONFIG_VIDEO_IMX335=y
# CONFIG_VIDEO_IMX355 is not set
CONFIG_VIDEO_IMX412=y
CONFIG_VIDEO_MAX9271_LIB=y
CONFIG_VIDEO_MT9M001=y
CONFIG_VIDEO_MT9M032=y
CONFIG_VIDEO_MT9M111=y
# CONFIG_VIDEO_MT9P031 is not set
CONFIG_VIDEO_MT9T001=y
CONFIG_VIDEO_MT9T112=y
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_MT9V032=y
CONFIG_VIDEO_MT9V111=y
# CONFIG_VIDEO_NOON010PC30 is not set
CONFIG_VIDEO_OG01A1B=y
CONFIG_VIDEO_OV02A10=y
# CONFIG_VIDEO_OV08D10 is not set
CONFIG_VIDEO_OV13858=y
CONFIG_VIDEO_OV13B10=y
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
CONFIG_VIDEO_OV2680=y
CONFIG_VIDEO_OV2685=y
CONFIG_VIDEO_OV2740=y
# CONFIG_VIDEO_OV5640 is not set
CONFIG_VIDEO_OV5645=y
# CONFIG_VIDEO_OV5647 is not set
CONFIG_VIDEO_OV5670=y
# CONFIG_VIDEO_OV5675 is not set
CONFIG_VIDEO_OV5693=y
CONFIG_VIDEO_OV5695=y
# CONFIG_VIDEO_OV6650 is not set
CONFIG_VIDEO_OV7251=y
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV772X=y
CONFIG_VIDEO_OV7740=y
CONFIG_VIDEO_OV8856=y
CONFIG_VIDEO_OV9282=y
CONFIG_VIDEO_OV9640=y
CONFIG_VIDEO_OV9650=y
# CONFIG_VIDEO_OV9734 is not set
CONFIG_VIDEO_RDACM20=y
CONFIG_VIDEO_RDACM21=y
CONFIG_VIDEO_RJ54N1=y
# CONFIG_VIDEO_S5K4ECGX is not set
CONFIG_VIDEO_S5K5BAF=y
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K6AA is not set
CONFIG_VIDEO_SR030PC30=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_CCS=y
CONFIG_VIDEO_ET8EK8=y
CONFIG_VIDEO_M5MOLS=y
# end of Camera sensor devices

#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
CONFIG_VIDEO_AK7375=y
CONFIG_VIDEO_DW9714=y
CONFIG_VIDEO_DW9768=y
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_SONY_BTF_MPX=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
# CONFIG_VIDEO_TEA6415C is not set
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_ADV748X=y
CONFIG_VIDEO_ADV7604=y
# CONFIG_VIDEO_ADV7604_CEC is not set
CONFIG_VIDEO_ADV7842=y
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
# CONFIG_VIDEO_BT866 is not set
CONFIG_VIDEO_ISL7998X=y
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_MAX9286=y
CONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=y
# CONFIG_VIDEO_TC358743 is not set
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
# CONFIG_VIDEO_TW2804 is not set
CONFIG_VIDEO_TW9903=y
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
CONFIG_VIDEO_CX25840=y
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=y
# CONFIG_VIDEO_ADV7170 is not set
CONFIG_VIDEO_ADV7175=y
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
# CONFIG_VIDEO_ADV7511 is not set
CONFIG_VIDEO_AK881X=y
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=y
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
CONFIG_VIDEO_THS7303=y
# end of Miscellaneous helper chips

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_IT913X=y
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MT2060=y
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT20XX=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MXL301RF is not set
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=y
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=y
# CONFIG_DVB_STV6111 is not set

#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
# CONFIG_DVB_MN88472 is not set
CONFIG_DVB_MN88473=y
# CONFIG_DVB_SI2165 is not set
CONFIG_DVB_TDA18271C2DD=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
# CONFIG_DVB_CX24116 is not set
CONFIG_DVB_CX24117=y
# CONFIG_DVB_CX24120 is not set
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_S5H1420 is not set
CONFIG_DVB_SI21XX=y
CONFIG_DVB_STB6000=y
# CONFIG_DVB_STV0288 is not set
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_TDA10071=y
CONFIG_DVB_TDA10086=y
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA8261=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TS2020=y
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
CONFIG_DVB_VES1X93=y
# CONFIG_DVB_ZL10036 is not set
CONFIG_DVB_ZL10039=y

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
# CONFIG_DVB_CX22700 is not set
CONFIG_DVB_CX22702=y
# CONFIG_DVB_CXD2820R is not set
CONFIG_DVB_CXD2841ER=y
# CONFIG_DVB_DIB3000MB is not set
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
# CONFIG_DVB_DRXD is not set
CONFIG_DVB_EC100=y
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_RTL2832_SDR=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_STV0367=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_TDA1004X=y
# CONFIG_DVB_ZD1301_DEMOD is not set
CONFIG_DVB_ZL10353=y

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_STV0297 is not set
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
CONFIG_DVB_VES1820=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
# CONFIG_DVB_AU8522_DTV is not set
CONFIG_DVB_AU8522_V4L=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_LGDT3305=y
# CONFIG_DVB_LGDT3306A is not set
# CONFIG_DVB_LGDT330X is not set
CONFIG_DVB_MXL692=y
CONFIG_DVB_NXT200X=y
# CONFIG_DVB_OR51132 is not set
CONFIG_DVB_OR51211=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=y

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=y

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_MN88443X is not set
# CONFIG_DVB_TC90522 is not set

#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=y

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=y
CONFIG_DVB_AF9033=y
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_HELENE=y
# CONFIG_DVB_HORUS3A is not set
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=y
# CONFIG_DVB_LNBP22 is not set
CONFIG_DVB_M88RS2000=y
# CONFIG_DVB_TDA665x is not set
CONFIG_DVB_DRX39XYJ=y

#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
# CONFIG_DRM_FBDEV_EMULATION is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_BUDDY=y
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips

#
# ARM devices
#
CONFIG_DRM_HDLCD=y
# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set
# CONFIG_DRM_MALI_DISPLAY is not set
CONFIG_DRM_KOMEDA=y
# end of ARM devices

CONFIG_DRM_KMB_DISPLAY=y
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
CONFIG_DRM_EXYNOS=y

#
# CRTCs
#
# CONFIG_DRM_EXYNOS_FIMD is not set
CONFIG_DRM_EXYNOS5433_DECON=y
# CONFIG_DRM_EXYNOS7_DECON is not set
CONFIG_DRM_EXYNOS_MIXER=y
CONFIG_DRM_EXYNOS_VIDI=y

#
# Encoders and Bridges
#
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_HDMI=y
# CONFIG_DRM_EXYNOS_MIC is not set

#
# Sub-drivers
#
CONFIG_DRM_EXYNOS_G2D=y
CONFIG_DRM_EXYNOS_IPP=y
CONFIG_DRM_EXYNOS_FIMC=y
# CONFIG_DRM_EXYNOS_ROTATOR is not set
CONFIG_DRM_EXYNOS_SCALER=y
CONFIG_DRM_EXYNOS_GSC=y
# CONFIG_DRM_UDL is not set
CONFIG_DRM_RCAR_DW_HDMI=y
# CONFIG_DRM_RCAR_USE_LVDS is not set
# CONFIG_DRM_RCAR_MIPI_DSI is not set
# CONFIG_DRM_SUN4I is not set
CONFIG_DRM_VIRTIO_GPU=y
# CONFIG_DRM_MSM is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set
# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
# CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829 is not set
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
# CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=y
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=y
# CONFIG_DRM_CROS_EC_ANX7688 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
CONFIG_DRM_FSL_LDB=y
CONFIG_DRM_ITE_IT6505=y
CONFIG_DRM_LONTIUM_LT8912B=y
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
CONFIG_DRM_LONTIUM_LT9611UXC=y
CONFIG_DRM_ITE_IT66121=y
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_PARADE_PS8640=y
CONFIG_DRM_SIL_SII8620=y
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
# CONFIG_DRM_TOSHIBA_TC358762 is not set
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=y
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_DLPC3433=y
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=y
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
CONFIG_DRM_I2C_ADV7511=y
# CONFIG_DRM_I2C_ADV7511_CEC is not set
CONFIG_DRM_CDNS_MHDP8546=y
CONFIG_DRM_CDNS_MHDP8546_J721E=y
CONFIG_DRM_IMX8QM_LDB=y
CONFIG_DRM_IMX8QXP_LDB=y
CONFIG_DRM_IMX8QXP_PIXEL_COMBINER=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=y
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=y
CONFIG_DRM_DW_HDMI_GP_AUDIO=y
CONFIG_DRM_DW_HDMI_CEC=y
# end of Display Interface Bridges

CONFIG_DRM_INGENIC=y
CONFIG_DRM_INGENIC_IPU=y
# CONFIG_DRM_V3D is not set
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_IMX_LCDIF=y
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_GM12U320 is not set
CONFIG_DRM_SIMPLEDRM=y
CONFIG_DRM_PL111=y
CONFIG_DRM_TVE200=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_ASPEED_GFX=y
CONFIG_DRM_MCDE=y
CONFIG_DRM_TIDSS=y
CONFIG_DRM_GUD=y
CONFIG_DRM_SSD130X=y
CONFIG_DRM_SSD130X_I2C=y
CONFIG_DRM_SPRD=y
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CLPS711X=y
# CONFIG_FB_IMX is not set
CONFIG_FB_ARC=y
CONFIG_FB_CONTROL=y
CONFIG_FB_EFI=y
CONFIG_FB_GBE=y
CONFIG_FB_GBE_MEM=4
CONFIG_FB_PVR2=y
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
# CONFIG_FB_WM8505 is not set
# CONFIG_FB_PXA168 is not set
CONFIG_FB_W100=y
# CONFIG_FB_SH_MOBILE_LCDC is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SMSCUFX=y
# CONFIG_FB_UDL is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=y
CONFIG_FB_DA8XX=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_SSD1307=y
# CONFIG_FB_OMAP_LCD_H3 is not set
CONFIG_FB_OMAP2=y
# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
CONFIG_FB_OMAP2_NUM_FBS=3
CONFIG_FB_OMAP2_DSS_INIT=y
CONFIG_FB_OMAP2_DSS=y
CONFIG_FB_OMAP2_DSS_DEBUG=y
# CONFIG_FB_OMAP2_DSS_DEBUGFS is not set
# CONFIG_FB_OMAP2_DSS_DPI is not set
CONFIG_FB_OMAP2_DSS_VENC=y
CONFIG_FB_OMAP2_DSS_HDMI_COMMON=y
CONFIG_FB_OMAP4_DSS_HDMI=y
# CONFIG_FB_OMAP5_DSS_HDMI is not set
# CONFIG_FB_OMAP2_DSS_SDI is not set
# CONFIG_FB_OMAP2_DSS_DSI is not set
CONFIG_FB_OMAP2_DSS_MIN_FCK_PER_PCK=0
# CONFIG_FB_OMAP2_DSS_SLEEP_AFTER_VENC_RESET is not set

#
# OMAPFB Panel and Encoder Drivers
#
CONFIG_FB_OMAP2_ENCODER_OPA362=y
# CONFIG_FB_OMAP2_ENCODER_TFP410 is not set
CONFIG_FB_OMAP2_ENCODER_TPD12S015=y
CONFIG_FB_OMAP2_CONNECTOR_DVI=y
# CONFIG_FB_OMAP2_CONNECTOR_HDMI is not set
CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=y
CONFIG_FB_OMAP2_PANEL_DPI=y
# end of OMAPFB Panel and Encoder Drivers

CONFIG_MMP_DISP=y
CONFIG_MMP_DISP_CONTROLLER=y
CONFIG_MMP_FB=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_OMAP1=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_MAX8925=y
# CONFIG_BACKLIGHT_MT6370 is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support

CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_PCM_TIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_CTL_FAST_LOOKUP is not set
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_CTL_INPUT_VALIDATION=y
# CONFIG_SND_CTL_DEBUG is not set
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_DRIVERS is not set

#
# HD-Audio
#
# end of HD-Audio

CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_USB is not set
# CONFIG_SND_FIREWIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_VIRTIO is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACCUTOUCH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_APPLEIR=y
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=y
CONFIG_HID_BIGBEN_FF=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=y
CONFIG_HID_PRODIKEYS=y
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CREATIVE_SB0540=y
# CONFIG_HID_CYPRESS is not set
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=y
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_GT683R=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_VRC2=y
CONFIG_HID_XIAOMI=y
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
# CONFIG_HID_ITE is not set
CONFIG_HID_JABRA=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
# CONFIG_HID_LED is not set
CONFIG_HID_LENOVO=y
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
CONFIG_HID_MAYFLASH=y
CONFIG_HID_MEGAWORLD_FF=y
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=y
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PXRC=y
CONFIG_HID_RAZER=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
CONFIG_HID_SIGMAMICRO=y
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_TOPRE=y
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_U2FZERO=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set
# end of USB HID support

#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support

CONFIG_I2C_HID_CORE=y
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_FEW_INIT_RETRIES=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_BRCMSTB is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1362_HCD=y
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SPEAR is not set
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_S3C2410=y
CONFIG_USB_OHCI_HCD_LPC32XX=y
# CONFIG_USB_OHCI_HCD_AT91 is not set
CONFIG_USB_OHCI_HCD_OMAP3=y
# CONFIG_USB_OHCI_HCD_DAVINCI is not set
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_SH=y
CONFIG_USB_OHCI_EXYNOS=y
# CONFIG_USB_CNS3XXX_OHCI is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=y
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_CDNS_SUPPORT=y
# CONFIG_USB_CDNS3 is not set
CONFIG_USB_MTU3=y
CONFIG_USB_MTU3_HOST=y
# CONFIG_USB_MTU3_DEBUG is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HOST=y

#
# Platform Glue Layer
#
# CONFIG_USB_MUSB_TUSB6010 is not set
# CONFIG_USB_MUSB_DSPS is not set
CONFIG_USB_MUSB_UX500=y
# CONFIG_USB_MUSB_MEDIATEK is not set
# CONFIG_USB_MUSB_POLARFIRE_SOC is not set

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_UX500_DMA=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_HOST=y

#
# Platform Glue Driver Support
#
# CONFIG_USB_DWC3_OMAP is not set
CONFIG_USB_DWC3_EXYNOS=y
# CONFIG_USB_DWC3_KEYSTONE is not set
# CONFIG_USB_DWC3_MESON_G12A is not set
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC3_ST=y
CONFIG_USB_DWC3_QCOM=y
CONFIG_USB_DWC3_IMX8MP=y
# CONFIG_USB_DWC3_AM62 is not set
# CONFIG_USB_DWC2 is not set
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y

#
# USB port drivers
#

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_QCOM_EUD=y
CONFIG_APPLE_MFI_FASTCHARGE=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_USB_CHAOSKEY is not set
CONFIG_BRCM_USB_PINMAP=y
CONFIG_USB_ONBOARD_HUB=y

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=y
CONFIG_AM335X_PHY_USB=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
CONFIG_USB_TEGRA_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# CONFIG_JZ4770_PHY is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
CONFIG_UCSI_CCG=y
# CONFIG_UCSI_STM32G0 is not set
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_ANX7411 is not set
# CONFIG_TYPEC_RT1719 is not set
# CONFIG_TYPEC_HD3SS3220 is not set
CONFIG_TYPEC_STUSB160X=y
CONFIG_TYPEC_QCOM_PMIC=y
# CONFIG_TYPEC_WUSB3801 is not set

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=y
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers

CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
# CONFIG_PWRSEQ_EMMC is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_ASPEED=y
CONFIG_MMC_SDHCI_OF_ASPEED_TEST=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
CONFIG_MMC_SDHCI_OF_SPARX5=y
CONFIG_MMC_SDHCI_CADENCE=y
# CONFIG_MMC_SDHCI_CNS3XXX is not set
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
# CONFIG_MMC_SDHCI_TEGRA is not set
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_SDHCI_PXAV2=y
CONFIG_MMC_SDHCI_SPEAR=y
# CONFIG_MMC_SDHCI_S3C_DMA is not set
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_MILBEAUT=y
# CONFIG_MMC_SDHCI_IPROC is not set
CONFIG_MMC_MESON_GX=y
CONFIG_MMC_MESON_MX_SDHC=y
CONFIG_MMC_MESON_MX_SDIO=y
# CONFIG_MMC_MOXART is not set
CONFIG_MMC_SDHCI_ST=y
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_SDHCI_MSM is not set
CONFIG_MMC_DAVINCI=y
CONFIG_MMC_S3C=y
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
# CONFIG_MMC_S3C_PIO is not set
CONFIG_MMC_S3C_DMA=y
CONFIG_MMC_SDHCI_SPRD=y
CONFIG_MMC_TMIO_CORE=y
CONFIG_MMC_TMIO=y
# CONFIG_MMC_SDHI is not set
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_BLUEFIELD=y
CONFIG_MMC_DW_EXYNOS=y
# CONFIG_MMC_DW_HI3798CV200 is not set
CONFIG_MMC_DW_K3=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_VUB300=y
# CONFIG_MMC_USHC is not set
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_REALTEK_USB=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_BCM2835=y
CONFIG_MMC_MTK=y
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MMC_SDHCI_OMAP is not set
# CONFIG_MMC_SDHCI_AM654 is not set
# CONFIG_MMC_OWL is not set
CONFIG_MMC_LITEX=y
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_REALTEK_USB=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
# CONFIG_LEDS_HARDWARE_CONTROL is not set

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
# CONFIG_LEDS_AN30259A is not set
CONFIG_LEDS_ARIEL=y
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_MT6323 is not set
# CONFIG_LEDS_S3C24XX is not set
CONFIG_LEDS_COBALT_QUBE=y
CONFIG_LEDS_COBALT_RAQ=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_NS2 is not set
CONFIG_LEDS_NETXBIG=y
# CONFIG_LEDS_ASIC3 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
CONFIG_LEDS_MAX77650=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
# CONFIG_LEDS_MENF21BMC is not set
CONFIG_LEDS_IS31FL319X=y
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_PM8058=y
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
CONFIG_LEDS_LM36274=y
CONFIG_LEDS_IP30=y
CONFIG_LEDS_ACER_A500=y
CONFIG_LEDS_BCM63138=y
CONFIG_LEDS_LGM=y

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
# end of Speakup console speech

CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_AL_MC=y
CONFIG_EDAC_XGENE=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_LIB_KUNIT_TEST=y
# CONFIG_RTC_NVMEM is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8925 is not set
CONFIG_RTC_DRV_MAX8997=y
CONFIG_RTC_DRV_MAX77686=y
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RK808 is not set
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_S5M is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_PCF2127=y
# CONFIG_RTC_DRV_RV3029C2 is not set
CONFIG_RTC_DRV_RX6110=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
CONFIG_RTC_DRV_DS17885=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9055=y
# CONFIG_RTC_DRV_DA9063 is not set
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_GAMECUBE is not set
CONFIG_RTC_DRV_SC27XX=y
# CONFIG_RTC_DRV_SPEAR is not set
# CONFIG_RTC_DRV_PCF50633 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
CONFIG_RTC_DRV_NTXEC=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=y
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=y
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_S3C=y
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_AT91RM9200 is not set
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_RTC_DRV_RZN1=y
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_VT8500 is not set
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_STMP=y
CONFIG_RTC_DRV_JZ4740=y
CONFIG_RTC_DRV_LPC24XX=y
# CONFIG_RTC_DRV_LPC32XX is not set
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_RTC_DRV_TEGRA=y
# CONFIG_RTC_DRV_MXC is not set
CONFIG_RTC_DRV_MXC_V2=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_RTC_DRV_MOXART=y
CONFIG_RTC_DRV_MT2712=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_MT7622=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_R7301=y
CONFIG_RTC_DRV_STM32=y
CONFIG_RTC_DRV_RTD119X=y
# CONFIG_RTC_DRV_ASPEED is not set
# CONFIG_RTC_DRV_TI_K3 is not set

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
CONFIG_RTC_DRV_MSC313=y
CONFIG_RTC_DRV_POLARFIRE_SOC=y
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
# CONFIG_APPLE_ADMAC is not set
CONFIG_AXI_DMAC=y
# CONFIG_DMA_JZ4780 is not set
CONFIG_DMA_SA11X0=y
CONFIG_DMA_SUN6I=y
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_EP93XX_DMA is not set
# CONFIG_FSL_EDMA is not set
CONFIG_IMG_MDC_DMA=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOP_ADMA is not set
# CONFIG_K3_DMA is not set
# CONFIG_MCF_EDMA is not set
CONFIG_MILBEAUT_HDMAC=y
# CONFIG_MILBEAUT_XDMAC is not set
# CONFIG_MMP_PDMA is not set
CONFIG_MMP_TDMA=y
CONFIG_MV_XOR=y
CONFIG_MXS_DMA=y
CONFIG_NBPFAXI_DMA=y
CONFIG_STM32_DMA=y
# CONFIG_STM32_DMAMUX is not set
CONFIG_STM32_MDMA=y
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
CONFIG_TEGRA20_APB_DMA=y
CONFIG_TEGRA210_ADMA=y
# CONFIG_TIMB_DMA is not set
# CONFIG_UNIPHIER_MDMAC is not set
CONFIG_UNIPHIER_XDMAC=y
CONFIG_XGENE_DMA=y
# CONFIG_XILINX_ZYNQMP_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
CONFIG_MTK_HSDMA=y
CONFIG_MTK_CQDMA=y
CONFIG_QCOM_ADM=y
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_RZN1_DMAMUX is not set
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
# CONFIG_SH_DMAE_BASE is not set
# CONFIG_RCAR_DMAC is not set
CONFIG_RENESAS_USB_DMAC=y
# CONFIG_RZ_DMAC is not set
# CONFIG_TI_EDMA is not set
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
CONFIG_INTEL_LDMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# CONFIG_DMABUF_HEAPS_CMA is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VFIO=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PLATFORM=y
CONFIG_VFIO_AMBA=y
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=y
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=y
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=y
# CONFIG_VFIO_MDEV is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
# CONFIG_COMEDI_BOND is not set
CONFIG_COMEDI_TEST=y
CONFIG_COMEDI_PARPORT=y
# CONFIG_COMEDI_SSV_DNP is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=y
# CONFIG_COMEDI_NI_USB6501 is not set
CONFIG_COMEDI_USBDUX=y
CONFIG_COMEDI_USBDUXFAST=y
CONFIG_COMEDI_USBDUXSIGMA=y
# CONFIG_COMEDI_VMK80XX is not set
# CONFIG_COMEDI_8255_SA is not set
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
CONFIG_COMEDI_TESTS_NI_ROUTES=y
CONFIG_STAGING=y
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_IMX_MEDIA=y

#
# i.MX5/6/7/8 Media Sub devices
#
CONFIG_VIDEO_IMX7_CSI=y
# end of i.MX5/6/7/8 Media Sub devices

CONFIG_VIDEO_MAX96712=y
CONFIG_VIDEO_MESON_VDEC=y
# CONFIG_VIDEO_OMAP4 is not set
CONFIG_VIDEO_ROCKCHIP_VDEC=y
CONFIG_VIDEO_SUNXI=y
# CONFIG_VIDEO_SUNXI_CEDRUS is not set
CONFIG_STAGING_MEDIA_DEPRECATED=y
CONFIG_VIDEO_CPIA2=y
CONFIG_VIDEO_VIU=y
# CONFIG_VIDEO_STKWEBCAM is not set
CONFIG_VIDEO_TM6000=y
# CONFIG_VIDEO_TM6000_ALSA is not set
CONFIG_VIDEO_TM6000_DVB=y
# CONFIG_VIDEO_DM6446_CCDC is not set
# CONFIG_VIDEO_DM355_CCDC is not set
CONFIG_VIDEO_DM365_ISIF=y
CONFIG_USB_ZR364XX=y
# CONFIG_STAGING_BOARD is not set
CONFIG_MOST_COMPONENTS=y
CONFIG_MOST_VIDEO=y
CONFIG_MOST_DIM2=y
CONFIG_MOST_I2C=y
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=y
CONFIG_VCHIQ_CDEV=y
# CONFIG_SND_BCM2835 is not set
CONFIG_VIDEO_BCM2835=y
CONFIG_BCM2835_VCHIQ_MMAL=y
# CONFIG_XIL_AXIS_FIFO is not set
CONFIG_FIELDBUS_DEV=y
CONFIG_HMS_ANYBUSS_BUS=y
CONFIG_ARCX_ANYBUS_CONTROLLER=y
CONFIG_HMS_PROFINET=y
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
# CONFIG_OLPC_XO175 is not set
# CONFIG_SURFACE_PLATFORMS is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs

CONFIG_CLK_HSDK=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_BM1880=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
CONFIG_COMMON_CLK_FSL_SAI=y
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMMON_CLK_LAN966X=y
# CONFIG_COMMON_CLK_ASPEED is not set
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
CONFIG_CLK_QORIQ=y
# CONFIG_CLK_LS1028A_PLLDIG is not set
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_OXNAS is not set
CONFIG_COMMON_CLK_RS9_PCIE=y
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_VC7=y
CONFIG_COMMON_CLK_MMP2_AUDIO=y
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_ACTIONS=y
# CONFIG_CLK_OWL_S500 is not set
# CONFIG_CLK_OWL_S700 is not set
CONFIG_CLK_OWL_S900=y
# CONFIG_CLK_BAIKAL_T1 is not set
CONFIG_CLK_BCM2711_DVP=y
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
CONFIG_COMMON_CLK_HI3516CV300=y
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3559A=y
CONFIG_COMMON_CLK_HI3660=y
# CONFIG_COMMON_CLK_HI3670 is not set
CONFIG_COMMON_CLK_HI3798CV200=y
CONFIG_COMMON_CLK_HI6220=y
CONFIG_RESET_HISI=y
CONFIG_STUB_CLK_HI6220=y
# CONFIG_STUB_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_BOSTON is not set
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MN=y
# CONFIG_CLK_IMX8MP is not set
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8ULP=y
CONFIG_CLK_IMX93=y

#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
# CONFIG_INGENIC_CGU_JZ4740 is not set
CONFIG_INGENIC_CGU_JZ4725B=y
CONFIG_INGENIC_CGU_JZ4760=y
# CONFIG_INGENIC_CGU_JZ4770 is not set
CONFIG_INGENIC_CGU_JZ4780=y
# CONFIG_INGENIC_CGU_X1000 is not set
CONFIG_INGENIC_CGU_X1830=y
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers

# CONFIG_COMMON_CLK_KEYSTONE is not set
CONFIG_TI_SYSCON_CLK=y

#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
CONFIG_COMMON_CLK_MT2701_MMSYS=y
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
# CONFIG_COMMON_CLK_MT2701_ETHSYS is not set
# CONFIG_COMMON_CLK_MT2701_BDPSYS is not set
CONFIG_COMMON_CLK_MT2701_AUDSYS=y
CONFIG_COMMON_CLK_MT2701_G3DSYS=y
CONFIG_COMMON_CLK_MT2712=y
# CONFIG_COMMON_CLK_MT2712_BDPSYS is not set
CONFIG_COMMON_CLK_MT2712_IMGSYS=y
# CONFIG_COMMON_CLK_MT2712_JPGDECSYS is not set
CONFIG_COMMON_CLK_MT2712_MFGCFG=y
CONFIG_COMMON_CLK_MT2712_MMSYS=y
# CONFIG_COMMON_CLK_MT2712_VDECSYS is not set
# CONFIG_COMMON_CLK_MT2712_VENCSYS is not set
# CONFIG_COMMON_CLK_MT6765 is not set
CONFIG_COMMON_CLK_MT6779=y
# CONFIG_COMMON_CLK_MT6779_MMSYS is not set
# CONFIG_COMMON_CLK_MT6779_IMGSYS is not set
# CONFIG_COMMON_CLK_MT6779_IPESYS is not set
# CONFIG_COMMON_CLK_MT6779_CAMSYS is not set
CONFIG_COMMON_CLK_MT6779_VDECSYS=y
CONFIG_COMMON_CLK_MT6779_VENCSYS=y
# CONFIG_COMMON_CLK_MT6779_MFGCFG is not set
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
CONFIG_COMMON_CLK_MT6795=y
# CONFIG_COMMON_CLK_MT6795_MFGCFG is not set
CONFIG_COMMON_CLK_MT6795_MMSYS=y
CONFIG_COMMON_CLK_MT6795_VDECSYS=y
CONFIG_COMMON_CLK_MT6795_VENCSYS=y
CONFIG_COMMON_CLK_MT6797=y
# CONFIG_COMMON_CLK_MT6797_MMSYS is not set
# CONFIG_COMMON_CLK_MT6797_IMGSYS is not set
CONFIG_COMMON_CLK_MT6797_VDECSYS=y
CONFIG_COMMON_CLK_MT6797_VENCSYS=y
# CONFIG_COMMON_CLK_MT7622 is not set
CONFIG_COMMON_CLK_MT7629=y
# CONFIG_COMMON_CLK_MT7629_ETHSYS is not set
CONFIG_COMMON_CLK_MT7629_HIFSYS=y
CONFIG_COMMON_CLK_MT7986=y
# CONFIG_COMMON_CLK_MT7986_ETHSYS is not set
CONFIG_COMMON_CLK_MT8135=y
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
CONFIG_COMMON_CLK_MT8195=y
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

CONFIG_MSTAR_MSC313_MPLL=y
CONFIG_MCHP_CLK_MPFS=y
# CONFIG_COMMON_CLK_PISTACHIO is not set
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_RPMCC=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_A53PLL=y
# CONFIG_QCOM_A7PLL is not set
CONFIG_QCOM_CLK_APCS_MSM8916=y
# CONFIG_QCOM_CLK_APCS_SDX55 is not set
CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_QCOM_CLK_RPMH=y
CONFIG_APQ_GCC_8084=y
CONFIG_APQ_MMCC_8084=y
CONFIG_IPQ_APSS_PLL=y
CONFIG_IPQ_APSS_6018=y
CONFIG_IPQ_GCC_4019=y
CONFIG_IPQ_GCC_6018=y
CONFIG_IPQ_GCC_806X=y
CONFIG_IPQ_LCC_806X=y
CONFIG_IPQ_GCC_8074=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_GCC_8909=y
# CONFIG_MSM_GCC_8916 is not set
# CONFIG_MSM_GCC_8939 is not set
CONFIG_MSM_GCC_8960=y
CONFIG_MSM_LCC_8960=y
CONFIG_MDM_GCC_9607=y
CONFIG_MDM_GCC_9615=y
CONFIG_MDM_LCC_9615=y
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_GCC_8953 is not set
CONFIG_MSM_GCC_8974=y
CONFIG_MSM_MMCC_8974=y
CONFIG_MSM_GCC_8976=y
# CONFIG_MSM_MMCC_8994 is not set
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_GCC_8996=y
CONFIG_MSM_MMCC_8996=y
CONFIG_MSM_GCC_8998=y
CONFIG_MSM_GPUCC_8998=y
CONFIG_MSM_MMCC_8998=y
CONFIG_QCM_GCC_2290=y
CONFIG_QCM_DISPCC_2290=y
# CONFIG_QCS_GCC_404 is not set
CONFIG_SC_CAMCC_7180=y
CONFIG_SC_CAMCC_7280=y
# CONFIG_SC_DISPCC_7180 is not set
CONFIG_SC_DISPCC_7280=y
CONFIG_SC_GCC_7180=y
CONFIG_SC_GCC_7280=y
CONFIG_SC_GCC_8180X=y
CONFIG_SC_GCC_8280XP=y
# CONFIG_SC_GPUCC_7180 is not set
CONFIG_SC_GPUCC_7280=y
CONFIG_SC_GPUCC_8280XP=y
# CONFIG_SC_LPASSCC_7280 is not set
# CONFIG_SC_LPASS_CORECC_7180 is not set
# CONFIG_SC_LPASS_CORECC_7280 is not set
# CONFIG_SC_MSS_7180 is not set
CONFIG_SC_VIDEOCC_7180=y
CONFIG_SC_VIDEOCC_7280=y
# CONFIG_SDM_CAMCC_845 is not set
CONFIG_SDM_GCC_660=y
# CONFIG_SDM_MMCC_660 is not set
# CONFIG_SDM_GPUCC_660 is not set
CONFIG_QCS_TURING_404=y
# CONFIG_QCS_Q6SSTOP_404 is not set
CONFIG_SDM_GCC_845=y
CONFIG_SDM_GPUCC_845=y
CONFIG_SDM_VIDEOCC_845=y
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_LPASSCC_845 is not set
CONFIG_SDX_GCC_55=y
CONFIG_SDX_GCC_65=y
# CONFIG_SM_CAMCC_8250 is not set
CONFIG_SM_CAMCC_8450=y
# CONFIG_SM_DISPCC_6125 is not set
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_DISPCC_8450=y
# CONFIG_SM_GCC_6115 is not set
CONFIG_SM_GCC_6125=y
# CONFIG_SM_GCC_6350 is not set
CONFIG_SM_GCC_6375=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_SM_GCC_8350=y
CONFIG_SM_GCC_8450=y
# CONFIG_SM_GPUCC_6350 is not set
CONFIG_SM_GPUCC_8150=y
# CONFIG_SM_GPUCC_8250 is not set
CONFIG_SM_GPUCC_8350=y
CONFIG_SM_VIDEOCC_8150=y
CONFIG_SM_VIDEOCC_8250=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_QCOM_HFPLL=y
CONFIG_KPSS_XCC=y
CONFIG_CLK_GFM_LPASS_SM8250=y
CONFIG_CLK_MT7621=y
CONFIG_CLK_RENESAS=y
CONFIG_CLK_EMEV2=y
# CONFIG_CLK_RZA1 is not set
CONFIG_CLK_R7S9210=y
CONFIG_CLK_R8A73A4=y
# CONFIG_CLK_R8A7740 is not set
# CONFIG_CLK_R8A7742 is not set
# CONFIG_CLK_R8A7743 is not set
CONFIG_CLK_R8A7745=y
CONFIG_CLK_R8A77470=y
# CONFIG_CLK_R8A774A1 is not set
CONFIG_CLK_R8A774B1=y
CONFIG_CLK_R8A774C0=y
# CONFIG_CLK_R8A774E1 is not set
# CONFIG_CLK_R8A7778 is not set
CONFIG_CLK_R8A7779=y
# CONFIG_CLK_R8A7790 is not set
# CONFIG_CLK_R8A7791 is not set
# CONFIG_CLK_R8A7792 is not set
# CONFIG_CLK_R8A7794 is not set
# CONFIG_CLK_R8A7795 is not set
# CONFIG_CLK_R8A77960 is not set
# CONFIG_CLK_R8A77961 is not set
# CONFIG_CLK_R8A77965 is not set
# CONFIG_CLK_R8A77970 is not set
# CONFIG_CLK_R8A77980 is not set
# CONFIG_CLK_R8A77990 is not set
# CONFIG_CLK_R8A77995 is not set
CONFIG_CLK_R8A779A0=y
# CONFIG_CLK_R8A779F0 is not set
# CONFIG_CLK_R8A779G0 is not set
CONFIG_CLK_R9A06G032=y
CONFIG_CLK_R9A07G043=y
# CONFIG_CLK_R9A07G044 is not set
# CONFIG_CLK_R9A07G054 is not set
CONFIG_CLK_R9A09G011=y
CONFIG_CLK_SH73A0=y
CONFIG_CLK_RCAR_CPG_LIB=y
CONFIG_CLK_RCAR_GEN2_CPG=y
CONFIG_CLK_RCAR_GEN3_CPG=y
CONFIG_CLK_RCAR_GEN4_CPG=y
# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
CONFIG_CLK_RZG2L=y
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_CPG_MSTP=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_SAMSUNG=y
# CONFIG_S3C64XX_COMMON_CLK is not set
CONFIG_S5PV210_COMMON_CLK=y
# CONFIG_EXYNOS_3250_COMMON_CLK is not set
# CONFIG_EXYNOS_4_COMMON_CLK is not set
# CONFIG_EXYNOS_5250_COMMON_CLK is not set
# CONFIG_EXYNOS_5260_COMMON_CLK is not set
CONFIG_EXYNOS_5410_COMMON_CLK=y
# CONFIG_EXYNOS_5420_COMMON_CLK is not set
# CONFIG_EXYNOS_ARM64_COMMON_CLK is not set
CONFIG_EXYNOS_AUDSS_CLK_CON=y
CONFIG_EXYNOS_CLKOUT=y
CONFIG_S3C2410_COMMON_CLK=y
CONFIG_S3C2412_COMMON_CLK=y
CONFIG_S3C2443_COMMON_CLK=y
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
CONFIG_CLK_STARFIVE_JH7100=y
CONFIG_CLK_STARFIVE_JH7100_AUDIO=y
CONFIG_CLK_SUNXI=y
# CONFIG_CLK_SUNXI_CLOCKS is not set
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
# CONFIG_CLK_SUNXI_PRCM_SUN8I is not set
# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_OMAP=y
# CONFIG_HWSPINLOCK_QCOM is not set
CONFIG_HWSPINLOCK_SPRD=y
CONFIG_HWSPINLOCK_STM32=y
CONFIG_HWSPINLOCK_SUN6I=y
CONFIG_HSEM_U8500=y

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
CONFIG_BCM_KONA_TIMER=y
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
CONFIG_OMAP_DM_TIMER=y
CONFIG_DW_APB_TIMER=y
# CONFIG_FTTMR010_TIMER is not set
CONFIG_IXP4XX_TIMER=y
CONFIG_MESON6_TIMER=y
CONFIG_OWL_TIMER=y
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
CONFIG_VT8500_TIMER=y
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
CONFIG_CLPS711X_TIMER=y
CONFIG_MXS_TIMER=y
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_CLKSRC_TI_32K=y
CONFIG_CLKSRC_STM32_LP=y
# CONFIG_CLKSRC_MPS2 is not set
CONFIG_ARC_TIMERS=y
# CONFIG_ARC_TIMERS_64BIT is not set
CONFIG_ARM_TIMER_SP804=y
# CONFIG_ARMV7M_SYSTICK is not set
CONFIG_ATMEL_PIT=y
# CONFIG_ATMEL_ST is not set
CONFIG_CLKSRC_SAMSUNG_PWM=y
# CONFIG_FSL_FTM_TIMER is not set
CONFIG_OXNAS_RPS_TIMER=y
CONFIG_MTK_TIMER=y
# CONFIG_SPRD_TIMER is not set
CONFIG_CLKSRC_JCORE_PIT=y
# CONFIG_SH_TIMER_CMT is not set
CONFIG_SH_TIMER_MTU2=y
# CONFIG_RENESAS_OSTM is not set
CONFIG_SH_TIMER_TMU=y
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
CONFIG_TIMER_IMX_SYS_CTR=y
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
CONFIG_RISCV_TIMER=y
CONFIG_CLINT_TIMER=y
CONFIG_MSC313E_TIMER=y
CONFIG_INGENIC_TIMER=y
# CONFIG_INGENIC_SYSOST is not set
CONFIG_INGENIC_OST=y
CONFIG_MICROCHIP_PIT64B=y
# CONFIG_GOLDFISH_TIMER is not set
# end of Clock Source drivers

CONFIG_MAILBOX=y
# CONFIG_IMX_MBOX is not set
CONFIG_PLATFORM_MHU=y
CONFIG_ARMADA_37XX_RWTM_MBOX=y
# CONFIG_ROCKCHIP_MBOX is not set
CONFIG_ALTERA_MBOX=y
CONFIG_HI3660_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_MAILBOX_TEST=y
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
CONFIG_QCOM_APCS_IPC=y
CONFIG_BCM_PDC_MBOX=y
CONFIG_STM32_IPCC=y
# CONFIG_MTK_ADSP_MBOX is not set
CONFIG_MTK_CMDQ_MBOX=y
# CONFIG_SUN6I_MSGBOX is not set
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST=y
# end of Generic IOMMU Pagetable Support

CONFIG_IOMMU_DEBUGFS=y
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
CONFIG_OMAP_IOMMU_DEBUG=y
# CONFIG_ROCKCHIP_IOMMU is not set
# CONFIG_SUN50I_IOMMU is not set
# CONFIG_EXYNOS_IOMMU is not set
# CONFIG_S390_CCW_IOMMU is not set
# CONFIG_S390_AP_IOMMU is not set
CONFIG_MTK_IOMMU=y
CONFIG_SPRD_IOMMU=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# CONFIG_INGENIC_VPU_RPROC is not set
CONFIG_MTK_SCP=y
CONFIG_MESON_MX_AO_ARC_REMOTEPROC=y
CONFIG_RCAR_REMOTEPROC=y
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_MTK_SCP=y
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
CONFIG_APPLE_RTKIT=y
CONFIG_APPLE_SART=y
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_ASPEED_UART_ROUTING=y
CONFIG_ASPEED_P2A_CTRL=y
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers

CONFIG_AT91_SOC_ID=y
# CONFIG_AT91_SOC_SFR is not set

#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BCM63XX=y
# CONFIG_SOC_BRCMSTB is not set
CONFIG_BCM63XX_POWER=y
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_FSL_GUTS=y
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
CONFIG_SOC_IMX9=y
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=y
CONFIG_MTK_DEVAPC=y
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=y
# CONFIG_MTK_SCPSYS is not set
CONFIG_MTK_MMSYS=y
CONFIG_MTK_SVS=y
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=y
# CONFIG_QCOM_GENI_SE is not set
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_LLCC=y
CONFIG_QCOM_RPMH=y
# CONFIG_QCOM_RPMHPD is not set
# CONFIG_QCOM_SMEM is not set
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SPM=y
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

CONFIG_SOC_RENESAS=y
# CONFIG_ARCH_R9A07G043 is not set
# CONFIG_RST_RCAR is not set
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RCAR_GEN4=y
# CONFIG_SYSC_R8A77995 is not set
# CONFIG_SYSC_R8A7794 is not set
CONFIG_SYSC_R8A77990=y
# CONFIG_SYSC_R8A7779 is not set
# CONFIG_SYSC_R8A7790 is not set
CONFIG_SYSC_R8A7795=y
# CONFIG_SYSC_R8A7791 is not set
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
# CONFIG_SYSC_R8A779F0 is not set
# CONFIG_SYSC_R8A7792 is not set
# CONFIG_SYSC_R8A77980 is not set
CONFIG_SYSC_R8A77970=y
# CONFIG_SYSC_R8A779A0 is not set
CONFIG_SYSC_R8A779G0=y
CONFIG_SYSC_RMOBILE=y
# CONFIG_SYSC_R8A77470 is not set
CONFIG_SYSC_R8A7745=y
CONFIG_SYSC_R8A7742=y
CONFIG_SYSC_R8A7743=y
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A774E1=y
CONFIG_SYSC_R8A774A1=y
# CONFIG_SYSC_R8A774B1 is not set
CONFIG_ROCKCHIP_GRF=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_SOC_SAMSUNG=y
# CONFIG_EXYNOS_ASV_ARM is not set
CONFIG_EXYNOS_CHIPID=y
CONFIG_EXYNOS_USI=y
# CONFIG_EXYNOS_PM_DOMAINS is not set
CONFIG_EXYNOS_REGULATOR_COUPLER=y
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
CONFIG_SOC_TI=y
CONFIG_UX500_SOC_ID=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
CONFIG_ARM_IMX_BUS_DEVFREQ=y
CONFIG_ARM_TEGRA_DEVFREQ=y
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ=y
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX14577=y
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_PTN5150 is not set
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
CONFIG_BRCMSTB_DPFE=y
CONFIG_BRCMSTB_MEMC=y
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_AEMIF is not set
CONFIG_TI_EMIF=y
# CONFIG_OMAP_GPMC is not set
# CONFIG_MVEBU_DEVBUS is not set
CONFIG_FSL_CORENET_CF=y
CONFIG_FSL_IFC=y
# CONFIG_JZ4780_NEMC is not set
CONFIG_MTK_SMI=y
CONFIG_DA8XX_DDRCTL=y
CONFIG_RENESAS_RPCIF=y
CONFIG_STM32_FMC2_EBI=y
# CONFIG_SAMSUNG_MC is not set
# CONFIG_TEGRA_MC is not set
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL is not set
# CONFIG_PWM_ATMEL_HLCDC_PWM is not set
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
CONFIG_PWM_BERLIN=y
CONFIG_PWM_BRCMSTB=y
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_EP93XX is not set
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_HIBVT=y
CONFIG_PWM_IMG=y
CONFIG_PWM_IMX1=y
CONFIG_PWM_IMX27=y
CONFIG_PWM_IMX_TPM=y
CONFIG_PWM_INTEL_LGM=y
CONFIG_PWM_IQS620A=y
# CONFIG_PWM_JZ4740 is not set
CONFIG_PWM_KEEMBAY=y
# CONFIG_PWM_LPC18XX_SCT is not set
CONFIG_PWM_LPC32XX=y
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
CONFIG_PWM_MTK_DISP=y
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
# CONFIG_PWM_NTXEC is not set
CONFIG_PWM_OMAP_DMTIMER=y
CONFIG_PWM_PCA9685=y
CONFIG_PWM_PXA=y
CONFIG_PWM_RASPBERRYPI_POE=y
CONFIG_PWM_RCAR=y
# CONFIG_PWM_RENESAS_TPU is not set
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_SIFIVE=y
CONFIG_PWM_SL28CPLD=y
# CONFIG_PWM_SPEAR is not set
CONFIG_PWM_SPRD=y
# CONFIG_PWM_STI is not set
CONFIG_PWM_STM32=y
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_STMPE is not set
CONFIG_PWM_SUN4I=y
CONFIG_PWM_SUNPLUS=y
# CONFIG_PWM_TEGRA is not set
CONFIG_PWM_TIECAP=y
CONFIG_PWM_TIEHRPWM=y
CONFIG_PWM_VISCONTI=y
# CONFIG_PWM_VT8500 is not set
CONFIG_PWM_XILINX=y

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=y
CONFIG_JCORE_AIC=y
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
CONFIG_RENESAS_RZA1_IRQC=y
CONFIG_RENESAS_RZG2L_IRQC=y
# CONFIG_SL28CPLD_INTC is not set
CONFIG_TS4800_IRQ=y
CONFIG_XILINX_INTC=y
CONFIG_INGENIC_TCU_IRQ=y
CONFIG_IRQ_UNIPHIER_AIDET=y
CONFIG_MESON_IRQ_GPIO=y
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_IMX_MU_MSI=y
CONFIG_RISCV_INTC=y
CONFIG_SIFIVE_PLIC=y
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
CONFIG_RESET_ATH79=y
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_HSDK=y
# CONFIG_RESET_IMX7 is not set
CONFIG_RESET_INTEL_GW=y
CONFIG_RESET_K210=y
CONFIG_RESET_LANTIQ=y
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
CONFIG_RESET_MESON=y
CONFIG_RESET_MESON_AUDIO_ARB=y
# CONFIG_RESET_NPCM is not set
CONFIG_RESET_PISTACHIO=y
CONFIG_RESET_POLARFIRE_SOC=y
# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RESET_QCOM_PDC=y
CONFIG_RESET_RASPBERRYPI=y
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
CONFIG_RESET_STARFIVE_JH7100=y
CONFIG_RESET_SUNPLUS=y
# CONFIG_RESET_SUNXI is not set
CONFIG_RESET_TI_SCI=y
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
CONFIG_RESET_TN48M_CPLD=y
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_PHY_PISTACHIO_USB=y
# CONFIG_PHY_XGENE is not set
CONFIG_USB_LGM_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN6I_MIPI_DPHY=y
CONFIG_PHY_SUN9I_USB=y
CONFIG_PHY_SUN50I_USB3=y
# CONFIG_PHY_MESON8_HDMI_TX is not set
CONFIG_PHY_MESON8B_USB2=y
CONFIG_PHY_MESON_GXL_USB2=y
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
CONFIG_PHY_MESON_G12A_USB2=y
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
CONFIG_PHY_MESON_AXG_PCIE=y
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y

#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
# CONFIG_PHY_CYGNUS_PCIE is not set
CONFIG_PHY_BCM_SR_USB=y
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
CONFIG_PHY_NS2_USB_DRD=y
CONFIG_PHY_BRCM_SATA=y
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
# CONFIG_PHY_CADENCE_SIERRA is not set
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
CONFIG_PHY_MIXEL_LVDS_PHY=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_FSL_IMX8M_PCIE=y
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
CONFIG_PHY_HI3660_USB=y
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
# CONFIG_PHY_INGENIC_USB is not set
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
# CONFIG_PHY_BERLIN_SATA is not set
CONFIG_PHY_BERLIN_USB=y
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_MVEBU_CP110_UTMI=y
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PHY_PXA_USB=y
CONFIG_PHY_MMP3_USB=y
CONFIG_PHY_MMP3_HSIC=y
CONFIG_PHY_MTK_PCIE=y
CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_MTK_UFS=y
CONFIG_PHY_MTK_XSPHY=y
CONFIG_PHY_MTK_HDMI=y
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
CONFIG_PHY_SPARX5_SERDES=y
CONFIG_PHY_LAN966X_SERDES=y
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=y
CONFIG_PHY_QCOM_EDP=y
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
CONFIG_PHY_RALINK_USB=y
CONFIG_PHY_RCAR_GEN3_USB3=y
CONFIG_PHY_ROCKCHIP_DPHY_RX0=y
CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=y
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
CONFIG_PHY_EXYNOS_DP_VIDEO=y
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_PHY_EXYNOS_PCIE=y
CONFIG_PHY_SAMSUNG_UFS=y
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_EXYNOS5_USBDRD is not set
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
# CONFIG_PHY_UNIPHIER_PCIE is not set
CONFIG_PHY_UNIPHIER_AHCI=y
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PHY_SUNPLUS_USB=y
# CONFIG_PHY_TEGRA194_P2U is not set
CONFIG_PHY_DA8XX_USB=y
# CONFIG_PHY_DM816X_USB is not set
CONFIG_PHY_AM654_SERDES=y
CONFIG_PHY_J721E_WIZ=y
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_TI_PIPE3=y
CONFIG_PHY_INTEL_KEEMBAY_EMMC=y
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
CONFIG_PHY_INTEL_LGM_COMBO=y
# CONFIG_PHY_INTEL_LGM_EMMC is not set
CONFIG_PHY_INTEL_THUNDERBAY_EMMC=y
CONFIG_PHY_XILINX_ZYNQMP=y
# end of PHY Subsystem

CONFIG_POWERCAP=y
# CONFIG_DTPM is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_ARM_CCN=y
CONFIG_ARM_CMN=y
CONFIG_RISCV_PMU=y
# CONFIG_RISCV_PMU_LEGACY is not set
CONFIG_RISCV_PMU_SBI=y
CONFIG_FSL_IMX8_DDR_PMU=y
# CONFIG_ARM_DMC620_PMU is not set
CONFIG_ALIBABA_UNCORE_DRW_PMU=y
# end of Performance monitor support

CONFIG_RAS=y

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_APPLE_EFUSES=y
CONFIG_NVMEM_BCM_OCOTP=y
# CONFIG_NVMEM_BRCM_NVRAM is not set
CONFIG_NVMEM_IMX_IIM=y
# CONFIG_NVMEM_IMX_OCOTP is not set
CONFIG_NVMEM_JZ4780_EFUSE=y
# CONFIG_NVMEM_LAN9662_OTPC is not set
CONFIG_NVMEM_LAYERSCAPE_SFP=y
CONFIG_NVMEM_LPC18XX_EEPROM=y
# CONFIG_NVMEM_LPC18XX_OTP is not set
CONFIG_NVMEM_MESON_MX_EFUSE=y
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
CONFIG_NVMEM_MTK_EFUSE=y
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_NVMEM_NINTENDO_OTP=y
CONFIG_NVMEM_QCOM_QFPROM=y
# CONFIG_NVMEM_RMEM is not set
CONFIG_NVMEM_ROCKCHIP_EFUSE=y
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
CONFIG_NVMEM_SNVS_LPGPR=y
CONFIG_NVMEM_SPMI_SDAM=y
CONFIG_NVMEM_SPRD_EFUSE=y
CONFIG_NVMEM_STM32_ROMEM=y
CONFIG_NVMEM_SUNPLUS_OCOTP=y
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
CONFIG_NVMEM_VF610_OCOTP=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_AST_CF=y
# CONFIG_FSI_MASTER_ASPEED is not set
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
# CONFIG_MUX_GPIO is not set
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
# CONFIG_INTERCONNECT is not set
CONFIG_COUNTER=y
CONFIG_104_QUAD_8=y
CONFIG_INTERRUPT_CNT=y
CONFIG_STM32_TIMER_CNT=y
CONFIG_STM32_LPTIMER_CNT=y
# CONFIG_TI_EQEP is not set
# CONFIG_FTM_QUADDEC is not set
CONFIG_MICROCHIP_TCB_CAPTURE=y
CONFIG_TI_ECAP_CAPTURE=y
CONFIG_MOST=y
# CONFIG_MOST_USB_HDM is not set
# CONFIG_MOST_CDEV is not set
CONFIG_MOST_SND=y
CONFIG_PECI=y
CONFIG_PECI_CPU=y
CONFIG_PECI_ASPEED=y
CONFIG_HTE=y
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
CONFIG_FS_ENCRYPTION=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_EFIVAR_FS is not set
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_PSTORE is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y

#
# No trust source selected!
#
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization

CONFIG_CC_HAS_RANDSTRUCT=y
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_ECDSA=y
# CONFIG_CRYPTO_ECRDSA is not set
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_CHACHA20POLY1305=y
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=y
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_VMAC=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation

#
# Userspace interface
#
# end of Userspace interface

# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_SPLIT=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_REF_TRACKER=y
CONFIG_PARMAN=y
CONFIG_OBJAGG=y
# end of Library routines

CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_ASHLDI3=y
CONFIG_GENERIC_LIB_ASHRDI3=y
CONFIG_GENERIC_LIB_LSHRDI3=y
CONFIG_GENERIC_LIB_UCMPDI2=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_SYMBOLIC_ERRNAME is not set
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
CONFIG_HEADERS_INSTALL=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KGDB_QXFER_PKT=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_CC_HAS_UBSAN_ARRAY_BOUNDS=y
# CONFIG_UBSAN_BOUNDS is not set
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_UNREACHABLE=y
# CONFIG_UBSAN_BOOL is not set
CONFIG_UBSAN_ENUM=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SHRINKER_DEBUG=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VM_PGFLAGS=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# riscv Debugging
#
# end of riscv Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
CONFIG_RBTREE_TEST=y
CONFIG_REED_SOLOMON_TEST=y
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_HEXDUMP=y
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
CONFIG_TEST_BITMAP=y
# CONFIG_TEST_UUID is not set
CONFIG_TEST_XARRAY=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_SIPHASH=y
CONFIG_TEST_IDA=y
CONFIG_TEST_PARMAN=y
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
# CONFIG_LINEAR_RANGES_TEST is not set
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_SLUB_KUNIT_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_FORTIFY_KUNIT_TEST=y
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_OBJAGG is not set
CONFIG_TEST_MEMINIT=y
# CONFIG_TEST_FREE_PAGES is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

CONFIG_WARN_MISSING_DOCUMENTS=y
CONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 9085 bytes --]

Hi Christian,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on pavel-leds/for-next]
[also build test ERROR on robh/for-next net-next/master net/master linus/master v6.1 next-20221215]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Christian-Marangi/Adds-support-for-PHY-LEDs-with-offload-triggers/20221215-080414
base:   git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git for-next
patch link:    https://lore.kernel.org/r/20221214235438.30271-7-ansuelsmth%40gmail.com
patch subject: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support
config: arc-randconfig-r005-20221214
compiler: arceb-elf-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/eb6fea2dd465c5aa879ed5c47d7109bd441797c2
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Christian-Marangi/Adds-support-for-PHY-LEDs-with-offload-triggers/20221215-080414
        git checkout eb6fea2dd465c5aa879ed5c47d7109bd441797c2
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arc SHELL=/bin/bash drivers/leds/trigger/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/leds/trigger/ledtrig-netdev.c: In function 'validate_baseline_state':
>> drivers/leds/trigger/ledtrig-netdev.c:102:29: error: implicit declaration of function 'led_trigger_blink_mode_is_supported'; did you mean 'led_trigger_blink_oneshot'? [-Werror=implicit-function-declaration]
     102 |                         if (led_trigger_blink_mode_is_supported(led_cdev, detail->bit))
         |                             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         |                             led_trigger_blink_oneshot
   drivers/leds/trigger/ledtrig-netdev.c: In function 'set_baseline_state':
>> drivers/leds/trigger/ledtrig-netdev.c:137:25: error: 'struct led_classdev' has no member named 'hw_control_configure'
     137 |                 led_cdev->hw_control_configure(led_cdev, BIT(TRIGGER_NETDEV_LINK),
         |                         ^~
>> drivers/leds/trigger/ledtrig-netdev.c:138:48: error: 'BLINK_MODE_ZERO' undeclared (first use in this function)
     138 |                                                BLINK_MODE_ZERO);
         |                                                ^~~~~~~~~~~~~~~
   drivers/leds/trigger/ledtrig-netdev.c:138:48: note: each undeclared identifier is reported only once for each function it appears in
   drivers/leds/trigger/ledtrig-netdev.c:146:33: error: 'struct led_classdev' has no member named 'hw_control_configure'
     146 |                         led_cdev->hw_control_configure(led_cdev, BIT(detail->bit),
         |                                 ^~
>> drivers/leds/trigger/ledtrig-netdev.c:147:56: error: 'BLINK_MODE_ENABLE' undeclared (first use in this function); did you mean 'IF_LINK_MODE_DEFAULT'?
     147 |                                                        BLINK_MODE_ENABLE);
         |                                                        ^~~~~~~~~~~~~~~~~
         |                                                        IF_LINK_MODE_DEFAULT
>> drivers/leds/trigger/ledtrig-netdev.c:150:25: error: 'struct led_classdev' has no member named 'hw_control_start'
     150 |                 led_cdev->hw_control_start(led_cdev);
         |                         ^~
   drivers/leds/trigger/ledtrig-netdev.c: In function 'netdev_trig_activate':
>> drivers/leds/trigger/ledtrig-netdev.c:503:29: error: 'struct led_classdev' has no member named 'hw_control_status'
     503 |                 if (led_cdev->hw_control_status(led_cdev)) {
         |                             ^~
   drivers/leds/trigger/ledtrig-netdev.c:504:38: error: 'struct led_classdev' has no member named 'hw_control_configure'
     504 |                         rc = led_cdev->hw_control_configure(led_cdev, BIT(TRIGGER_NETDEV_LINK),
         |                                      ^~
   drivers/leds/trigger/ledtrig-netdev.c:505:61: error: 'BLINK_MODE_ZERO' undeclared (first use in this function)
     505 |                                                             BLINK_MODE_ZERO);
         |                                                             ^~~~~~~~~~~~~~~
   cc1: some warnings being treated as errors


vim +102 drivers/leds/trigger/ledtrig-netdev.c

    68	
    69	static bool validate_baseline_state(struct led_netdev_data *trigger_data)
    70	{
    71		struct led_classdev *led_cdev = trigger_data->led_cdev;
    72		struct netdev_led_attr_detail *detail;
    73		u32 hw_blink_mode_supported = 0;
    74		bool force_sw = false;
    75		int i;
    76	
    77		for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
    78			detail = &attr_details[i];
    79	
    80			/* Mode not active, skip */
    81			if (!test_bit(detail->bit, &trigger_data->mode))
    82				continue;
    83	
    84			/* Hardware only mode enabled on software controlled led */
    85			if (led_cdev->blink_mode == SOFTWARE_CONTROLLED &&
    86			    detail->hardware_only)
    87				return false;
    88	
    89			/* Check if the mode supports hardware mode */
    90			if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
    91				/* With a net dev set, force software mode.
    92				 * With modes are handled by hardware, led will blink
    93				 * based on his own events and will ignore any event
    94				 * from the provided dev.
    95				 */
    96				if (trigger_data->net_dev) {
    97					force_sw = true;
    98					continue;
    99				}
   100	
   101				/* With empty dev, check if the mode is supported */
 > 102				if (led_trigger_blink_mode_is_supported(led_cdev, detail->bit))
   103					hw_blink_mode_supported |= BIT(detail->bit);
   104			}
   105		}
   106	
   107		/* We can't run modes handled by both software and hardware.
   108		 * Check if we run hardware modes and check if all the modes
   109		 * can be handled by hardware.
   110		 */
   111		if (hw_blink_mode_supported && hw_blink_mode_supported != trigger_data->mode)
   112			return false;
   113	
   114		/* Modes are valid. Decide now the running mode to later
   115		 * set the baseline.
   116		 * Software mode is enforced with net_dev set. With an empty
   117		 * one hardware mode is selected by default (if supported).
   118		 */
   119		if (force_sw || led_cdev->blink_mode == SOFTWARE_CONTROLLED)
   120			trigger_data->blink_mode = SOFTWARE_CONTROLLED;
   121		else
   122			trigger_data->blink_mode = HARDWARE_CONTROLLED;
   123	
   124		return true;
   125	}
   126	
   127	static void set_baseline_state(struct led_netdev_data *trigger_data)
   128	{
   129		int i;
   130		int current_brightness;
   131		struct netdev_led_attr_detail *detail;
   132		struct led_classdev *led_cdev = trigger_data->led_cdev;
   133	
   134		/* Modes already validated. Directly apply hw trigger modes */
   135		if (trigger_data->blink_mode == HARDWARE_CONTROLLED) {
   136			/* We are refreshing the blink modes. Reset them */
 > 137			led_cdev->hw_control_configure(led_cdev, BIT(TRIGGER_NETDEV_LINK),
 > 138						       BLINK_MODE_ZERO);
   139	
   140			for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
   141				detail = &attr_details[i];
   142	
   143				if (!test_bit(detail->bit, &trigger_data->mode))
   144					continue;
   145	
   146				led_cdev->hw_control_configure(led_cdev, BIT(detail->bit),
 > 147							       BLINK_MODE_ENABLE);
   148			}
   149	
 > 150			led_cdev->hw_control_start(led_cdev);
   151	
   152			return;
   153		}
   154	
   155		/* Handle trigger modes by software */
   156		current_brightness = led_cdev->brightness;
   157		if (current_brightness)
   158			led_cdev->blink_brightness = current_brightness;
   159		if (!led_cdev->blink_brightness)
   160			led_cdev->blink_brightness = led_cdev->max_brightness;
   161	
   162		if (!trigger_data->carrier_link_up) {
   163			led_set_brightness(led_cdev, LED_OFF);
   164		} else {
   165			if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
   166				led_set_brightness(led_cdev,
   167						   led_cdev->blink_brightness);
   168			else
   169				led_set_brightness(led_cdev, LED_OFF);
   170	
   171			/* If we are looking for RX/TX start periodically
   172			 * checking stats
   173			 */
   174			if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ||
   175			    test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
   176				schedule_delayed_work(&trigger_data->work, 0);
   177		}
   178	}
   179	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 112889 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arc 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="arceb-elf-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_TIME_KUNIT_TEST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_BPF=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_MISC is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters

CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_ARC=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_CSUM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_MMU=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_STACKTRACE_SUPPORT=y

#
# ARC Architecture Configuration
#

#
# ARC Platform/SoC/Board
#
# CONFIG_ARC_PLAT_TB10X is not set
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ARC_SOC_HSDK=y
# end of ARC Platform/SoC/Board

# CONFIG_ISA_ARCOMPACT is not set
CONFIG_ISA_ARCV2=y

#
# ARC CPU Configuration
#
CONFIG_ARC_CPU_HS=y
CONFIG_ARC_TUNE_MCPU=""
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
# CONFIG_ARC_SMP_HALT_ON_RESET is not set
CONFIG_ARC_MCIP=y
CONFIG_ARC_CACHE=y
CONFIG_ARC_CACHE_LINE_SHIFT=6
CONFIG_ARC_HAS_ICACHE=y
CONFIG_ARC_HAS_DCACHE=y
CONFIG_ARC_CACHE_PAGES=y
# CONFIG_ARC_HAS_ICCM is not set
# CONFIG_ARC_HAS_DCCM is not set
CONFIG_ARC_MMU_V4=y
# CONFIG_ARC_PAGE_SIZE_8K is not set
# CONFIG_ARC_PAGE_SIZE_16K is not set
CONFIG_ARC_PAGE_SIZE_4K=y
CONFIG_ARC_HUGEPAGE_2M=y
# CONFIG_ARC_HUGEPAGE_16M is not set
CONFIG_PGTABLE_LEVELS=2
CONFIG_ARC_FPU_SAVE_RESTORE=y
# CONFIG_ARC_HAS_LLSC is not set
# CONFIG_ARC_HAS_SWAPE is not set
# CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS is not set
# CONFIG_ARC_HAS_LL64 is not set
# CONFIG_ARC_HAS_DIV_REM is not set
CONFIG_ARC_HAS_ACCL_REGS=y
CONFIG_ARC_DSP_HANDLED=y
# CONFIG_ARC_DSP_NONE is not set
CONFIG_ARC_DSP_KERNEL=y
# CONFIG_ARC_DSP_USERSPACE is not set
# CONFIG_ARC_DSP_AGU_USERSPACE is not set
CONFIG_ARC_IRQ_NO_AUTOSAVE=y
# CONFIG_ARC_LPB_DISABLE is not set
# end of ARC CPU Configuration

CONFIG_LINUX_LINK_BASE=0x80000000
CONFIG_LINUX_RAM_BASE=0x80000000
CONFIG_HIGHMEM=y
# CONFIG_ARC_HAS_PAE40 is not set
CONFIG_ARC_KVADDR_SIZE=256
CONFIG_ARC_CURR_IN_REG=y
CONFIG_HZ=100
# CONFIG_ARC_METAWARE_HLINK is not set
# CONFIG_ARC_DBG is not set
CONFIG_ARC_BUILTIN_DTB_NAME=""
# end of ARC Architecture Configuration

CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_OF=y

#
# General architecture-dependent options
#
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_HAVE_ARCH_PFN_VALID=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_CGROUP_FC_APPID=y
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_ELFCORE=y
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#
# CONFIG_SWAP is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_BOUNCE=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_CMA is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
# CONFIG_NET_CLS_FLOWER is not set
CONFIG_NET_CLS_MATCHALL=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_SAMPLE=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_MPLS=y
# CONFIG_NET_ACT_VLAN is not set
CONFIG_NET_ACT_BPF=y
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_GATE=y
# CONFIG_NET_IFE_SKBMARK is not set
CONFIG_NET_IFE_SKBPRIO=y
# CONFIG_NET_IFE_SKBTCINDEX is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_QRTR=y
# CONFIG_QRTR_SMD is not set
CONFIG_QRTR_TUN=y
CONFIG_QRTR_MHI=y
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
# CONFIG_CAN_GW is not set
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HS is not set
# CONFIG_BT_LE is not set
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set

#
# Bluetooth device drivers
#
CONFIG_BT_MTK=y
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=y
CONFIG_BT_MTKUART=y
# CONFIG_BT_QCOMSMD is not set
CONFIG_BT_VIRTIO=y
# end of Bluetooth device drivers

# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
# CONFIG_CFG80211_REQUIRE_SIGNED_REGDB is not set
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""

#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_GPIO=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_VIRTUAL_NCI is not set
# CONFIG_NFC_FDP is not set
CONFIG_NFC_PN533=y
# CONFIG_NFC_PN533_I2C is not set
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
# CONFIG_NFC_NXP_NCI is not set
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
# CONFIG_NFC_S3FWRN82_UART is not set
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_I3C=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=y
# CONFIG_MHI_BUS_DEBUG is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol

CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_COREBOOT_TABLE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
CONFIG_MTD=y

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_OF_PARTS_BCM4908 is not set
# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
# CONFIG_FTL is not set
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_SPEAR_SMI=y
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_SAMSUNG is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
# CONFIG_MTD_RAW_NAND is not set

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_UBI is not set
CONFIG_MTD_HYPERBUS=y
# CONFIG_HBMC_AM654 is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=y
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8

#
# DRBD disabled because PROC_FS or INET not selected
#
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_PASSTHRU is not set
# CONFIG_NVME_TARGET_LOOP is not set
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_QCOM_COINCELL is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BCACHE_ASYNC_REGISTRATION=y
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support

# CONFIG_NETDEVICES is not set

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
# CONFIG_IPMI_IPMB is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=y
# CONFIG_HW_RANDOM is not set
CONFIG_DEVMEM=y
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_VTPM_PROXY=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DIGICOLOR is not set
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
CONFIG_I2C_KEMPLD=y
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support

CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
# CONFIG_SVC_I3C_MASTER is not set
CONFIG_MIPI_I3C_HCI=y
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
# CONFIG_PPS is not set

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AT91PIO4 is not set
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LPC18XX is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
# CONFIG_PINCTRL_PISTACHIO is not set
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
# CONFIG_PINCTRL_LOCHNAGAR is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set

#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers

# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
CONFIG_GPIO_SAMA5D2_PIOBU=y
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_XGENE_SB is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_KEMPLD is not set
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_STMPE=y
# CONFIG_GPIO_TPS65086 is not set
# CONFIG_GPIO_TPS65218 is not set
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# end of MFD GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_MXC is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=y
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_GSC=y
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31730=y
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_TPS23861 is not set
CONFIG_SENSORS_MENF21BMC_HWMON=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=y
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_MIPS is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_MADERA=y
# CONFIG_MFD_MADERA_I2C is not set
# CONFIG_MFD_CS47L15 is not set
CONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not set
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_IQS62X is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
# CONFIG_MFD_MT6370 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SY7636A is not set
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RT5120 is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SL28CPLD is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# end of STMicroelectronics STMPE Interface Drivers

# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
CONFIG_MFD_TQMX86=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
# CONFIG_MFD_WM8998 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
CONFIG_MFD_ROHM_BD957XMUF=y
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
CONFIG_REGULATOR_88PM800=y
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
# CONFIG_REGULATOR_AS3711 is not set
# CONFIG_REGULATOR_AS3722 is not set
CONFIG_REGULATOR_ATC260X=y
# CONFIG_REGULATOR_BD957XMUF is not set
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9055=y
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9063 is not set
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_FAN53880 is not set
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77686 is not set
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6331 is not set
# CONFIG_REGULATOR_MT6332 is not set
CONFIG_REGULATOR_MT6358=y
# CONFIG_REGULATOR_MT6359 is not set
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PF8X00 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
# CONFIG_REGULATOR_RT5033 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=y
# CONFIG_REGULATOR_RT6245 is not set
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
CONFIG_REGULATOR_STPMIC1=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS6286X is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
# CONFIG_REGULATOR_QCOM_LABIBB is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
CONFIG_FB_OMAP_LCD_H3=y
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
CONFIG_BACKLIGHT_LM3533=y
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_RT4831 is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_LP8788 is not set
# CONFIG_BACKLIGHT_AS3711 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_RAVE_SP=y
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support
# end of Graphics support

# CONFIG_SOUND is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
# CONFIG_LEDS_HARDWARE_CONTROL is not set

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8788 is not set
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=y
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_MENF21BMC is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXREG=y
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_LM3697 is not set
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_LM3601X=y
# CONFIG_LEDS_MT6360 is not set
CONFIG_LEDS_RT4505=y
# CONFIG_LEDS_RT8515 is not set
CONFIG_LEDS_SGM3140=y

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
# CONFIG_APPLE_ADMAC is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
# CONFIG_DMA_SUN6I is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_EP93XX_DMA is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_IMG_MDC_DMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_INTEL_IOP_ADMA is not set
# CONFIG_K3_DMA is not set
# CONFIG_MCF_EDMA is not set
# CONFIG_MILBEAUT_HDMAC is not set
# CONFIG_MILBEAUT_XDMAC is not set
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not set
# CONFIG_MV_XOR is not set
# CONFIG_MXS_DMA is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
# CONFIG_STM32_MDMA is not set
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
# CONFIG_TEGRA20_APB_DMA is not set
# CONFIG_TEGRA210_ADMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_UNIPHIER_MDMAC is not set
# CONFIG_UNIPHIER_XDMAC is not set
# CONFIG_XGENE_DMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
CONFIG_XILINX_ZYNQMP_DPDMA=y
# CONFIG_MTK_HSDMA is not set
# CONFIG_MTK_CQDMA is not set
# CONFIG_QCOM_ADM is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_RZN1_DMAMUX is not set
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
# CONFIG_SH_DMAE is not set
# CONFIG_RCAR_DMAC is not set
# CONFIG_RENESAS_USB_DMAC is not set
# CONFIG_RZ_DMAC is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
# CONFIG_LINEDISP is not set
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_CHARLCD_BL_OFF=y
# CONFIG_CHARLCD_BL_ON is not set
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_DFL=y
CONFIG_VFIO=y
# CONFIG_VFIO_NOIOMMU is not set
# CONFIG_VFIO_PLATFORM is not set
# CONFIG_VFIO_MDEV is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
CONFIG_VDPA=y
CONFIG_VDPA_SIM=y
CONFIG_VDPA_SIM_NET=y
# CONFIG_VDPA_SIM_BLOCK is not set
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=y
CONFIG_COMEDI_TEST=y
CONFIG_COMEDI_PARPORT=y
# CONFIG_COMEDI_SSV_DNP is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
# CONFIG_COMEDI_PCL724 is not set
# CONFIG_COMEDI_PCL726 is not set
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=y
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
# CONFIG_COMEDI_PCM3724 is not set
# CONFIG_COMEDI_AMPLC_DIO200_ISA is not set
# CONFIG_COMEDI_AMPLC_PC236_ISA is not set
CONFIG_COMEDI_AMPLC_PC263_ISA=y
# CONFIG_COMEDI_RTI800 is not set
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
# CONFIG_COMEDI_DAS16M1 is not set
# CONFIG_COMEDI_DAS08_ISA is not set
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
# CONFIG_COMEDI_DT2811 is not set
# CONFIG_COMEDI_DT2814 is not set
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=y
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=y
# CONFIG_COMEDI_FL512 is not set
# CONFIG_COMEDI_AIO_AIO12_8 is not set
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=y
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=y
# CONFIG_COMEDI_NI_AT_A2150 is not set
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
# CONFIG_COMEDI_NI_LABPC_ISA is not set
CONFIG_COMEDI_PCMAD=y
CONFIG_COMEDI_PCMDA12=y
# CONFIG_COMEDI_PCMMIO is not set
# CONFIG_COMEDI_PCMUIO is not set
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=y
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
# CONFIG_COMEDI_8255_SA is not set
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
# CONFIG_COMEDI_TESTS_NI_ROUTES is not set
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
CONFIG_CLK_SP810=y
# end of Clock driver for ARM Reference designs

CONFIG_CLK_HSDK=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PALMAS=y
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set

#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers

# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set

#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=y
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
# CONFIG_HWSPINLOCK_SPRD is not set
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
CONFIG_ARC_TIMERS=y
CONFIG_ARC_TIMERS_64BIT=y
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SPRD_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
# CONFIG_MESON_EE_PM_DOMAINS is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers

# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set

#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_SCPSYS_PM_DOMAINS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_PALMAS is not set
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=y
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y

#
# Accelerometers
#
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL367_I2C is not set
# CONFIG_ADXL372_I2C is not set
CONFIG_BMA180=y
# CONFIG_BMA400 is not set
# CONFIG_BMC150_ACCEL is not set
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
# CONFIG_FXLS8962AF_I2C is not set
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_KXSD9=y
CONFIG_KXSD9_I2C=y
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MSA311 is not set
CONFIG_MXC4005=y
# CONFIG_MXC6255 is not set
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7091R5=y
CONFIG_AD7291=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD799X=y
CONFIG_ADI_AXI_ADC=y
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not set
CONFIG_CC10001_ADC=y
CONFIG_DA9150_GPADC=y
CONFIG_ENVELOPE_DETECTOR=y
# CONFIG_EXYNOS_ADC is not set
# CONFIG_HX711 is not set
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
CONFIG_LP8788_ADC=y
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=y
CONFIG_LTC2497=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP3422=y
# CONFIG_MEDIATEK_MT6360_ADC is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
CONFIG_MEN_Z188_ADC=y
# CONFIG_MESON_SARADC is not set
CONFIG_MP2629_ADC=y
# CONFIG_NAU7802 is not set
# CONFIG_NPCM_ADC is not set
# CONFIG_PALMAS_GPADC is not set
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_RN5T618_ADC is not set
# CONFIG_ROCKCHIP_SARADC is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_ADC_CORE is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
CONFIG_STMPE_ADC=y
CONFIG_TI_ADC081C=y
# CONFIG_TI_ADS1015 is not set
CONFIG_TI_AM335X_ADC=y
CONFIG_VF610_ADC=y
# CONFIG_XILINX_XADC is not set
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_HMC425=y
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
# CONFIG_SCD30_CORE is not set
# CONFIG_SCD4X is not set
# CONFIG_SENSIRION_SGP30 is not set
# CONFIG_SENSIRION_SGP40 is not set
CONFIG_SPS30=y
# CONFIG_SPS30_I2C is not set
CONFIG_SPS30_SERIAL=y
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
CONFIG_AD5064=y
# CONFIG_AD5380 is not set
# CONFIG_AD5446 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
CONFIG_DPOT_DAC=y
# CONFIG_DS4424 is not set
# CONFIG_LPC18XX_DAC is not set
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=y
CONFIG_MCP4725=y
# CONFIG_STM32_DAC is not set
CONFIG_TI_DAC5571=y
CONFIG_VF610_DAC=y
# end of Digital to analog converters

#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
# CONFIG_FXAS21002C is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
CONFIG_HDC100X=y
# CONFIG_HDC2010 is not set
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
# CONFIG_BOSCH_BNO055_SERIAL is not set
# CONFIG_BOSCH_BNO055_I2C is not set
# CONFIG_FXOS8700_I2C is not set
CONFIG_KMX61=y
# CONFIG_INV_ICM42600_I2C is not set
# CONFIG_INV_MPU6050_I2C is not set
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
CONFIG_IIO_ST_LSM9DS0=y
CONFIG_IIO_ST_LSM9DS0_I2C=y
# end of Inertial measurement units

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=y
# CONFIG_AL3010 is not set
CONFIG_AL3320A=y
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=y
# CONFIG_CM36651 is not set
# CONFIG_GP2AP002 is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_IQS621_ALS is not set
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
CONFIG_LTR501=y
# CONFIG_LTRF216A is not set
# CONFIG_LV0104CS is not set
CONFIG_MAX44000=y
# CONFIG_MAX44009 is not set
CONFIG_NOA1305=y
# CONFIG_OPT3001 is not set
# CONFIG_PA12203001 is not set
# CONFIG_SI1133 is not set
CONFIG_SI1145=y
CONFIG_STK3310=y
# CONFIG_ST_UVIS25 is not set
# CONFIG_TCS3414 is not set
CONFIG_TCS3472=y
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
# CONFIG_VCNL4000 is not set
# CONFIG_VCNL4035 is not set
# CONFIG_VEML6030 is not set
CONFIG_VEML6070=y
# CONFIG_VL6180 is not set
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
CONFIG_AK09911=y
# CONFIG_BMC150_MAGN_I2C is not set
CONFIG_MAG3110=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
# CONFIG_SENSORS_RM3100_I2C is not set
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

CONFIG_IIO_FORMAT_KUNIT_TEST=y

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
# CONFIG_IIO_TIGHTLOOP_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=y
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
# CONFIG_MAX5432 is not set
CONFIG_MCP4018=y
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_DLHL60D=y
# CONFIG_DPS310 is not set
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
# CONFIG_MS5637 is not set
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=y
# CONFIG_MB1232 is not set
# CONFIG_PING is not set
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
# CONFIG_MLX90614 is not set
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TMP117=y
CONFIG_TSYS01=y
# CONFIG_TSYS02D is not set
# end of Temperature sensors

CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
# CONFIG_PWM_ATMEL is not set
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_EP93XX is not set
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
CONFIG_PWM_LP3943=y
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
# CONFIG_PWM_NTXEC is not set
# CONFIG_PWM_OMAP_DMTIMER is not set
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
CONFIG_PWM_STMPE=y
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set
# CONFIG_PWM_XILINX is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_DW_APB_ICTL=y
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
CONFIG_RESET_AXS10X=y
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
CONFIG_RESET_HSDK=y
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_TORRENT=y
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
CONFIG_PHY_CADENCE_SIERRA=y
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
CONFIG_PHY_MIXEL_MIPI_DPHY=y
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_LAN966X_SERDES is not set
CONFIG_PHY_OCELOT_SERDES=y
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
# CONFIG_DTPM is not set
CONFIG_MCB=y
CONFIG_MCB_LPC=y
# CONFIG_RAS is not set

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_BINDERFS is not set
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android

CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_RAVE_SP_EEPROM is not set
CONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_U_BOOT_ENV is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set

#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

CONFIG_FPGA=y
# CONFIG_FPGA_MGR_SOCFPGA is not set
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not set
# CONFIG_ALTERA_PR_IP_CORE is not set
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not set
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
# CONFIG_XILINX_PR_DECOUPLER is not set
CONFIG_FPGA_REGION=y
# CONFIG_OF_FPGA_REGION is not set
CONFIG_FPGA_DFL=y
# CONFIG_FPGA_DFL_AFU is not set
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=y
# CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set
# CONFIG_FPGA_MGR_VERSAL_FPGA is not set
CONFIG_FSI=y
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
# CONFIG_FSI_OCC is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
CONFIG_MOST=y
CONFIG_MOST_CDEV=y
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT2 is not set
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not set
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not set
CONFIG_F2FS_FS_LZ4=y
# CONFIG_F2FS_FS_LZ4HC is not set
# CONFIG_F2FS_FS_ZSTD is not set
CONFIG_F2FS_IOSTAT=y
# CONFIG_F2FS_UNFAIR_RWSEM is not set
CONFIG_ZONEFS_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not set
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_ENCRYPTION_INLINE_CRYPT is not set
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_FAT_KUNIT_TEST=y
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
CONFIG_NTFS3_FS=y
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
# CONFIG_PKCS7_MESSAGE_PARSER is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPUMASK_OFFSTACK=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines

CONFIG_ASN1_ENCODER=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
# CONFIG_SYMBOLIC_ERRNAME is not set
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
CONFIG_DEBUG_INFO_DWARF5=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_VMLINUX_MAP=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
CONFIG_DEBUG_FS_ALLOW_NONE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
# CONFIG_KGDB_KDB is not set
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
CONFIG_UBSAN_UNREACHABLE=y
CONFIG_UBSAN_BOOL=y
# CONFIG_UBSAN_ENUM is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_DEBUG_KMAP_LOCAL is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_SCALE_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_USER_EVENTS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_GCOV_PROFILE_FTRACE=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_STARTUP_TEST=y
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# arc Debugging
#
# CONFIG_16KSTACKS is not set
# end of arc Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAULT_INJECTION_USERCOPY is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
# CONFIG_TEST_MIN_HEAP is not set
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_TEST_REF_TRACKER is not set
CONFIG_RBTREE_TEST=y
# CONFIG_REED_SOLOMON_TEST is not set
CONFIG_INTERVAL_TREE_TEST=y
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_HEXDUMP=y
# CONFIG_STRING_SELFTEST is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_RHASHTABLE=y
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
CONFIG_FIND_BIT_BENCHMARK=y
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_SYSCTL=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
# CONFIG_LINEAR_RANGES_TEST is not set
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_SLUB_KUNIT_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_TEST_UDELAY=y
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_FREE_PAGES=y
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Alexander Stein]

Hi,

thanks for the v7 series.

Am Donnerstag, 15. Dezember 2022, 00:54:33 CET schrieb Christian Marangi:
> Add hardware control support for the Netdev trigger.
> The trigger on config change will check if the requested trigger can set
> to blink mode using LED hardware mode and if every blink mode is supported,
> the trigger will enable hardware mode with the requested configuration.
> If there is at least one trigger that is not supported and can't run in
> hardware mode, then software mode will be used instead.
> A validation is done on every value change and on fail the old value is
> restored and -EINVAL is returned.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  drivers/leds/trigger/ledtrig-netdev.c | 155 +++++++++++++++++++++++++-
>  1 file changed, 149 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/leds/trigger/ledtrig-netdev.c
> b/drivers/leds/trigger/ledtrig-netdev.c index dd63cadb896e..ed019cb5867c
> 100644
> --- a/drivers/leds/trigger/ledtrig-netdev.c
> +++ b/drivers/leds/trigger/ledtrig-netdev.c
> @@ -37,6 +37,7 @@
>   */
> 
>  struct led_netdev_data {
> +	enum led_blink_modes blink_mode;
>  	spinlock_t lock;
> 
>  	struct delayed_work work;
> @@ -53,11 +54,105 @@ struct led_netdev_data {
>  	bool carrier_link_up;
>  };
> 
> +struct netdev_led_attr_detail {
> +	char *name;
> +	bool hardware_only;
> +	enum led_trigger_netdev_modes bit;
> +};
> +
> +static struct netdev_led_attr_detail attr_details[] = {
> +	{ .name = "link", .bit = TRIGGER_NETDEV_LINK},
> +	{ .name = "tx", .bit = TRIGGER_NETDEV_TX},
> +	{ .name = "rx", .bit = TRIGGER_NETDEV_RX},
> +};
> +
> +static bool validate_baseline_state(struct led_netdev_data *trigger_data)
> +{
> +	struct led_classdev *led_cdev = trigger_data->led_cdev;
> +	struct netdev_led_attr_detail *detail;
> +	u32 hw_blink_mode_supported = 0;
> +	bool force_sw = false;
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> +		detail = &attr_details[i];
> +
> +		/* Mode not active, skip */
> +		if (!test_bit(detail->bit, &trigger_data->mode))
> +			continue;
> +
> +		/* Hardware only mode enabled on software controlled led 
*/
> +		if (led_cdev->blink_mode == SOFTWARE_CONTROLLED &&
> +		    detail->hardware_only)
> +			return false;
> +
> +		/* Check if the mode supports hardware mode */
> +		if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
> +			/* With a net dev set, force software mode.
> +			 * With modes are handled by hardware, led will 
blink
> +			 * based on his own events and will ignore any 
event
> +			 * from the provided dev.
> +			 */
> +			if (trigger_data->net_dev) {
> +				force_sw = true;
> +				continue;
> +			}
> +
> +			/* With empty dev, check if the mode is 
supported */
> +			if 
(led_trigger_blink_mode_is_supported(led_cdev, detail->bit))
> +				hw_blink_mode_supported |= BIT(detail-
>bit);

Shouldn't this be BIT(detail->bit)?

> +		}
> +	}
> +
> +	/* We can't run modes handled by both software and hardware.
> +	 * Check if we run hardware modes and check if all the modes
> +	 * can be handled by hardware.
> +	 */
> +	if (hw_blink_mode_supported && hw_blink_mode_supported !=
> trigger_data->mode) +		return false;
> +
> +	/* Modes are valid. Decide now the running mode to later
> +	 * set the baseline.
> +	 * Software mode is enforced with net_dev set. With an empty
> +	 * one hardware mode is selected by default (if supported).
> +	 */
> +	if (force_sw || led_cdev->blink_mode == SOFTWARE_CONTROLLED)

IMHO '|| !hw_blink_mode_supported' should be added here for blink_modes. This 
might happen if a PHY LED is SOFTWARE_HARDWARE_CONTROLLED, but some blink mode 
is not supported by hardware, thus hw_blink_mode_supported=0.

Best regards,
Alexander

> +		trigger_data->blink_mode = SOFTWARE_CONTROLLED;
> +	else
> +		trigger_data->blink_mode = HARDWARE_CONTROLLED;
> +
> +	return true;
> +}
> +
>  static void set_baseline_state(struct led_netdev_data *trigger_data)
>  {
> +	int i;
>  	int current_brightness;
> +	struct netdev_led_attr_detail *detail;
>  	struct led_classdev *led_cdev = trigger_data->led_cdev;
> 
> +	/* Modes already validated. Directly apply hw trigger modes */
> +	if (trigger_data->blink_mode == HARDWARE_CONTROLLED) {
> +		/* We are refreshing the blink modes. Reset them */
> +		led_cdev->hw_control_configure(led_cdev, 
BIT(TRIGGER_NETDEV_LINK),
> +					       BLINK_MODE_ZERO);
> +
> +		for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> +			detail = &attr_details[i];
> +
> +			if (!test_bit(detail->bit, &trigger_data->mode))
> +				continue;
> +
> +			led_cdev->hw_control_configure(led_cdev, 
BIT(detail->bit),
> +						       
BLINK_MODE_ENABLE);

Shouldn't this be BIT(detail->bit)?

> +		}
> +
> +		led_cdev->hw_control_start(led_cdev);
> +
> +		return;
> +	}
> +
> +	/* Handle trigger modes by software */
>  	current_brightness = led_cdev->brightness;
>  	if (current_brightness)
>  		led_cdev->blink_brightness = current_brightness;
> @@ -100,10 +195,15 @@ static ssize_t device_name_store(struct device *dev,
>  				 size_t size)
>  {
>  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> +	struct net_device *old_net = trigger_data->net_dev;
> +	char old_device_name[IFNAMSIZ];
> 
>  	if (size >= IFNAMSIZ)
>  		return -EINVAL;
> 
> +	/* Backup old device name */
> +	memcpy(old_device_name, trigger_data->device_name, IFNAMSIZ);
> +
>  	cancel_delayed_work_sync(&trigger_data->work);
> 
>  	spin_lock_bh(&trigger_data->lock);
> @@ -122,6 +222,19 @@ static ssize_t device_name_store(struct device *dev,
>  		trigger_data->net_dev =
>  		    dev_get_by_name(&init_net, trigger_data->device_name);
> 
> +	if (!validate_baseline_state(trigger_data)) {
> +		/* Restore old net_dev and device_name */
> +		if (trigger_data->net_dev)
> +			dev_put(trigger_data->net_dev);
> +
> +		dev_hold(old_net);
> +		trigger_data->net_dev = old_net;
> +		memcpy(trigger_data->device_name, old_device_name, 
IFNAMSIZ);
> +
> +		spin_unlock_bh(&trigger_data->lock);
> +		return -EINVAL;
> +	}
> +
>  	trigger_data->carrier_link_up = false;
>  	if (trigger_data->net_dev != NULL)
>  		trigger_data->carrier_link_up = 
netif_carrier_ok(trigger_data->net_dev);
> @@ -159,7 +272,7 @@ static ssize_t netdev_led_attr_store(struct device *dev,
> const char *buf, size_t size, enum led_trigger_netdev_modes attr)
>  {
>  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> -	unsigned long state;
> +	unsigned long state, old_mode = trigger_data->mode;
>  	int ret;
>  	int bit;
> 
> @@ -184,6 +297,12 @@ static ssize_t netdev_led_attr_store(struct device
> *dev, const char *buf, else
>  		clear_bit(bit, &trigger_data->mode);
> 
> +	if (!validate_baseline_state(trigger_data)) {
> +		/* Restore old mode on validation fail */
> +		trigger_data->mode = old_mode;
> +		return -EINVAL;
> +	}
> +
>  	set_baseline_state(trigger_data);
> 
>  	return size;
> @@ -220,6 +339,8 @@ static ssize_t interval_store(struct device *dev,
>  			      size_t size)
>  {
>  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> +	int old_interval = atomic_read(&trigger_data->interval);
> +	u32 old_mode = trigger_data->mode;
>  	unsigned long value;
>  	int ret;
> 
> @@ -228,13 +349,22 @@ static ssize_t interval_store(struct device *dev,
>  		return ret;
> 
>  	/* impose some basic bounds on the timer interval */
> -	if (value >= 5 && value <= 10000) {
> -		cancel_delayed_work_sync(&trigger_data->work);
> +	if (value < 5 || value > 10000)
> +		return -EINVAL;
> +
> +	cancel_delayed_work_sync(&trigger_data->work);
> +
> +	atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
> 
> -		atomic_set(&trigger_data->interval, 
msecs_to_jiffies(value));
> -		set_baseline_state(trigger_data);	/* resets timer 
*/
> +	if (!validate_baseline_state(trigger_data)) {
> +		/* Restore old interval on validation error */
> +		atomic_set(&trigger_data->interval, old_interval);
> +		trigger_data->mode = old_mode;
> +		return -EINVAL;
>  	}
> 
> +	set_baseline_state(trigger_data);	/* resets timer */
> +
>  	return size;
>  }
> 
> @@ -368,13 +498,25 @@ static int netdev_trig_activate(struct led_classdev
> *led_cdev) trigger_data->mode = 0;
>  	atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
>  	trigger_data->last_activity = 0;
> +	if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
> +		/* With hw mode enabled reset any rule set by default */
> +		if (led_cdev->hw_control_status(led_cdev)) {
> +			rc = led_cdev->hw_control_configure(led_cdev, 
BIT(TRIGGER_NETDEV_LINK),
> +							    
BLINK_MODE_ZERO);
> +			if (rc)
> +				goto err;
> +		}
> +	}
> 
>  	led_set_trigger_data(led_cdev, trigger_data);
> 
>  	rc = register_netdevice_notifier(&trigger_data->notifier);
>  	if (rc)
> -		kfree(trigger_data);
> +		goto err;
> 
> +	return 0;
> +err:
> +	kfree(trigger_data);
>  	return rc;
>  }
> 
> @@ -394,6 +536,7 @@ static void netdev_trig_deactivate(struct led_classdev
> *led_cdev)
> 
>  static struct led_trigger netdev_led_trigger = {
>  	.name = "netdev",
> +	.supported_blink_modes = SOFTWARE_HARDWARE,
>  	.activate = netdev_trig_activate,
>  	.deactivate = netdev_trig_deactivate,
>  	.groups = netdev_trig_groups,

Re: [PATCH v7 00/11] Adds support for PHY LEDs with offload triggers

[Alexander Stein]

Hi,

thanks for the new series.

Am Donnerstag, 15. Dezember 2022, 00:54:27 CET schrieb Christian Marangi:
> This is another attempt on adding this feature on LEDs, hoping this is
> the right time and someone finally notice this.

Unfortunately I'm out of office from next week on, so there is only limited 
feedback from my side.

> Most of the times Switch/PHY have connected multiple LEDs that are
> controlled by HW based on some rules/event. Currently we lack any
> support for a generic way to control the HW part and normally we
> either never implement the feature or only add control for brightness
> or hw blink.
> 
> This is based on Marek idea of providing some API to cled but use a
> different implementation that in theory should be more generilized.
> 
> The current idea is:
> - LED driver implement 3 API (hw_control_status/start/stop).
>   They are used to put the LED in hardware mode and to configure the
>   various trigger.
> - We have hardware triggers that are used to expose to userspace the
>   supported hardware mode and set the hardware mode on trigger
>   activation.
> - We can also have triggers that both support hardware and software mode.
> - The LED driver will declare each supported hardware blink mode and
>   communicate with the trigger all the supported blink modes that will
>   be available by sysfs.
> - A trigger will use blink_set to configure the blink mode to active
>   in hardware mode.
> - On hardware trigger activation, only the hardware mode is enabled but
>   the blink modes are not configured. The LED driver should reset any
>   link mode active by default.

I'm a bit confused about that blink mode is supposed to mean. I don't know 
what to implement for blink_set. Reading qca8k_cled_blink_set it seems to just 
configure the blink interval for the corresponding LED.
Unfortunately that's not possible for all PHYs. In my case, DP83867, I can 
configure the blink interval only globally. I'm not sure how this will fit 
into this LED trigger.

> Each LED driver will have to declare explicit support for the offload
> trigger (or return not supported error code) as we the trigger_data that
> the LED driver will elaborate and understand what is referring to (based
> on the current active trigger).
> 
> I posted a user for this new implementation that will benefit from this
> and will add a big feature to it. Currently qca8k can have up to 3 LEDs
> connected to each PHY port and we have some device that have only one of
> them connected and the default configuration won't work for that.

My DP83867 proof of concept implementation also supports several LEDs, but my 
actual hardware also only has 2 of them attached (LED0 and LED2).

Best regards,
Alexander

> The netdev trigger is expanded and it does now support hardware only
> triggers.
> The idea is to use hardware mode when a device_name is not defined.
> An additional sysfs entry is added to give some info about the available
> trigger modes supported in the current configuration.
> 
> 
> It was reported that at least 3 other switch family would benefits by
> this as they all lack support for a generic way to setup their leds and
> netdev team NACK each try to add special code to support LEDs present
> on switch in favor of a generic solution.
> 
> v7:
> - Rebase on top of net-next (for qca8k changes)
> - Fix some typo in commit description
> - Fix qca8k leds documentation warning
> - Remove RFC tag
> v6:
> - Back to RFC.
> - Drop additional trigger
> - Rework netdev trigger to support common modes used by switch and
>   hardware only triggers
> - Refresh qca8k leds logic and driver
> v5:
> - Move out of RFC. (no comments from Andrew this is the right path?)
> - Fix more spelling mistake (thx Randy)
> - Fix error reported by kernel test bot
> - Drop the additional HW_CONTROL flag. It does simplify CONFIG
>   handling and hw control should be available anyway to support
>   triggers as module.
> v4:
> - Rework implementation and drop hw_configure logic.
>   We now expand blink_set.
> - Address even more spelling mistake. (thx a lot Randy)
> - Drop blink option and use blink_set delay.
> - Rework phy-activity trigger to actually make the groups dynamic.
> v3:
> - Rework start/stop as Andrew asked.
> - Introduce more logic to permit a trigger to run in hardware mode.
> - Add additional patch with netdev hardware support.
> - Use test_bit API to check flag passed to hw_control_configure.
> - Added a new cmd to hw_control_configure to reset any active blink_mode.
> - Refactor all the patches to follow this new implementation.
> v2:
> - Fix spelling mistake (sorry)
> - Drop patch 02 "permit to declare supported offload triggers".
>   Change the logic, now the LED driver declare support for them
>   using the configure_offload with the cmd TRIGGER_SUPPORTED.
> - Rework code to follow this new implementation.
> - Update Documentation to better describe how this offload
>   implementation work.
> 
> Christian Marangi (11):
>   leds: add support for hardware driven LEDs
>   leds: add function to configure hardware controlled LED
>   leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode
>   leds: trigger: netdev: rename and expose NETDEV trigger enum modes
>   leds: trigger: netdev: convert device attr to macro
>   leds: trigger: netdev: add hardware control support
>   leds: trigger: netdev: use mutex instead of spinlocks
>   leds: trigger: netdev: add available mode sysfs attr
>   leds: trigger: netdev: add additional hardware only triggers
>   net: dsa: qca8k: add LEDs support
>   dt-bindings: net: dsa: qca8k: add LEDs definition example
> 
>  .../devicetree/bindings/net/dsa/qca8k.yaml    |  24 ++
>  Documentation/leds/leds-class.rst             |  53 +++
>  drivers/leds/Kconfig                          |  11 +
>  drivers/leds/led-class.c                      |  27 ++
>  drivers/leds/led-triggers.c                   |  29 ++
>  drivers/leds/trigger/ledtrig-netdev.c         | 385 ++++++++++++-----
>  drivers/net/dsa/qca/Kconfig                   |   9 +
>  drivers/net/dsa/qca/Makefile                  |   1 +
>  drivers/net/dsa/qca/qca8k-8xxx.c              |   4 +
>  drivers/net/dsa/qca/qca8k-leds.c              | 406 ++++++++++++++++++
>  drivers/net/dsa/qca/qca8k.h                   |  62 +++
>  include/linux/leds.h                          | 103 ++++-
>  12 files changed, 1015 insertions(+), 99 deletions(-)
>  create mode 100644 drivers/net/dsa/qca/qca8k-leds.c

Re: [PATCH v7 01/11] leds: add support for hardware driven LEDs

[Russell King (Oracle)]

Hi Christian,

Thanks for the patch.

I think Andrew's email is offline at the moment.

On Thu, Dec 15, 2022 at 12:54:28AM +0100, Christian Marangi wrote:
> +static bool led_trigger_is_supported(struct led_classdev *led_cdev,
> +				     struct led_trigger *trigger)
> +{
> +	switch (led_cdev->blink_mode) {
> +	case SOFTWARE_CONTROLLED:
> +		if (trigger->supported_blink_modes == HARDWARE_ONLY)
> +			return 0;
> +		break;
> +	case HARDWARE_CONTROLLED:
> +		if (trigger->supported_blink_modes == SOFTWARE_ONLY)
> +			return 0;
> +		break;
> +	case SOFTWARE_HARDWARE_CONTROLLED:
> +		break;
> +	default:
> +		return 0;
> +	}
> +
> +	return 1;

Should be returning true/false. I'm not sure I'm a fan of the style of
this though - wouldn't the following be easier to read?

	switch (led_cdev->blink_mode) {
	case SOFTWARE_CONTROLLED:
		return trigger->supported_blink_modes != HARDWARE_ONLY;

	case HARDWARE_CONTROLLED:
		return trigger->supported_blink_modes != SOFTWARE_ONLY;

	case SOFTWARE_HARDWARE_CONTROLLED:
		return true;
	}
?

Also, does it really need a default case - without it, when the
led_blink_modes enum is expanded and the switch statement isn't
updated, we'll get a compiler warning which will prompt this to be
updated - whereas, with a default case, it won't.

> @@ -188,6 +213,10 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
>  		led_set_brightness(led_cdev, LED_OFF);
>  	}
>  	if (trig) {
> +		/* Make sure the trigger support the LED blink mode */
> +		if (!led_trigger_is_supported(led_cdev, trig))
> +			return -EINVAL;

Shouldn't validation happen before we start taking any actions? In other
words, before we remove the previous trigger?

> @@ -350,12 +381,26 @@ static inline bool led_sysfs_is_disabled(struct led_classdev *led_cdev)
>  
>  #define TRIG_NAME_MAX 50
>  
> +enum led_trigger_blink_supported_modes {
> +	SOFTWARE_ONLY = SOFTWARE_CONTROLLED,
> +	HARDWARE_ONLY = HARDWARE_CONTROLLED,
> +	SOFTWARE_HARDWARE = SOFTWARE_HARDWARE_CONTROLLED,

I suspect all these generic names are asking for eventual namespace
clashes. Maybe prefix them with LED_ ?

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v7 02/11] leds: add function to configure hardware controlled LED

[Russell King (Oracle)]

Hi Christian,

On Thu, Dec 15, 2022 at 12:54:29AM +0100, Christian Marangi wrote:
> +A trigger once he declared support for hardware controlled blinks, will use the function
> +hw_control_configure() provided by the driver to check support for a particular blink mode.

Please improve the above. I think what is actually meant is "Where a
trigger has support for hardware controlled blink modes,
hw_control_configure() will be used to check whether a particular blink
mode is supported and configure the blink mode."

> +This function passes as the first argument (flag) a u32 flag.

I don't think "(flag)" is necessary, as I think "a u32 flag"
sufficiently suggests that it's called "flag". In any case, it doesn't
appear to be a "u32" but an "unsigned long".

> +The second argument (cmd) of hw_control_configure() method can be used to do various
> +operations for the specific blink mode. We currently support ENABLE, DISABLE, READ, ZERO
> +and SUPPORTED to enable, disable, read the state of the blink mode, ask the LED
> +driver if it does supports the specific blink mode and to reset any blink mode active.
> +
> +In ENABLE/DISABLE hw_control_configure() should configure the LED to enable/disable the
> +requested blink mode (flag).
> +In READ hw_control_configure() should return 0 or 1 based on the status of the requested
> +blink mode (flag).
> +In SUPPORTED hw_control_configure() should return 0 or 1 if the LED driver supports the
> +requested blink mode (flags) or not.
> +In ZERO hw_control_configure() should return 0 with success operation or error.

I think some kind of tabular description of this would be better.
Something like this but on docbook format:

hw_control_configure()'s second argument, cmd, is used to specify
various operations for the LED blink mode, and will be one of:

ENABLE - to enable the blink mode requested in flag. Returns ?
DISABLE - to disable the blink mode requested in flag. Returbns ?
READ - to indicate whether the blink mode requested in flag is enabled.
       Returns 0 if disabled or 1 if enabled.
SUPPORTED - to indicate whether the blink mode requested in flag is
            supported. Returns 0 if unsupported or 1 if supported.
ZERO - to disable all blink modes. Returns 0 or negative errno.

The problem with the way you've listed it is you've listed the
operations in a different order to the description in the same sentence,
so effectiely ZERO means to report whether supported and SUPPORTED means
to reset all blink modes!

> +
> +The unsigned long flag is specific to the trigger and change across them. It's in the LED
> +driver interest know how to elaborate this flag and to declare support for a
> +particular trigger.

Hmm, as a casual observer, this doesn't really give much information.
Does this mean that it's up to the hardware LED driver to decide what
each bit in the "flag" argument means? If not, I think this needs to
be worded better!

> For this exact reason explicit support for the specific
> +trigger is mandatory or the driver returns -EOPNOTSUPP if asked to enter offload mode
> +with a not supported trigger.

Seems to be a change in terminology - weren't we using "HARDWARE" and
"SOFTWARE" to describe the mode, rather than "offload" ?

> +If the driver returns -EOPNOTSUPP on hw_control_configure(), the trigger activation will
> +fail as the driver doesn't support that specific offload trigger or doesn't know
> +how to handle the provided flags.

This gets rather ambiguous. When can -EOPNOTSUPP be returned - for which
cmds? Surely, if we have already tested for support using the SUPPORTED
cmd which returns a 0/1 value, we should not be going on to trigger a
request to enable something that isn't supported?

> +
>  Known Issues
>  ============
>  
> diff --git a/include/linux/leds.h b/include/linux/leds.h
> index 09ff1dc6f48d..b5aad67fecfb 100644
> --- a/include/linux/leds.h
> +++ b/include/linux/leds.h
> @@ -73,6 +73,16 @@ enum led_blink_modes {
>  	SOFTWARE_HARDWARE_CONTROLLED,
>  };
>  
> +#ifdef CONFIG_LEDS_HARDWARE_CONTROL
> +enum blink_mode_cmd {
> +	BLINK_MODE_ENABLE, /* Enable the hardware blink mode */
> +	BLINK_MODE_DISABLE, /* Disable the hardware blink mode */
> +	BLINK_MODE_READ, /* Read the status of the hardware blink mode */
> +	BLINK_MODE_SUPPORTED, /* Ask the driver if the hardware blink mode is supported */
> +	BLINK_MODE_ZERO, /* Disable any hardware blink active */
> +};
> +#endif

Generally not a good idea to make definitions in header files
conditional on configuration symbols - it makes build-testing more
problematical.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Russell King (Oracle)]

On Thu, Dec 15, 2022 at 12:54:33AM +0100, Christian Marangi wrote:
> Add hardware control support for the Netdev trigger.
> The trigger on config change will check if the requested trigger can set
> to blink mode using LED hardware mode and if every blink mode is supported,
> the trigger will enable hardware mode with the requested configuration.
> If there is at least one trigger that is not supported and can't run in
> hardware mode, then software mode will be used instead.
> A validation is done on every value change and on fail the old value is
> restored and -EINVAL is returned.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  drivers/leds/trigger/ledtrig-netdev.c | 155 +++++++++++++++++++++++++-
>  1 file changed, 149 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
> index dd63cadb896e..ed019cb5867c 100644
> --- a/drivers/leds/trigger/ledtrig-netdev.c
> +++ b/drivers/leds/trigger/ledtrig-netdev.c
> @@ -37,6 +37,7 @@
>   */
>  
>  struct led_netdev_data {
> +	enum led_blink_modes blink_mode;
>  	spinlock_t lock;
>  
>  	struct delayed_work work;
> @@ -53,11 +54,105 @@ struct led_netdev_data {
>  	bool carrier_link_up;
>  };
>  
> +struct netdev_led_attr_detail {
> +	char *name;
> +	bool hardware_only;
> +	enum led_trigger_netdev_modes bit;
> +};
> +
> +static struct netdev_led_attr_detail attr_details[] = {
> +	{ .name = "link", .bit = TRIGGER_NETDEV_LINK},
> +	{ .name = "tx", .bit = TRIGGER_NETDEV_TX},
> +	{ .name = "rx", .bit = TRIGGER_NETDEV_RX},
> +};
> +
> +static bool validate_baseline_state(struct led_netdev_data *trigger_data)
> +{
> +	struct led_classdev *led_cdev = trigger_data->led_cdev;
> +	struct netdev_led_attr_detail *detail;
> +	u32 hw_blink_mode_supported = 0;
> +	bool force_sw = false;
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> +		detail = &attr_details[i];
> +
> +		/* Mode not active, skip */
> +		if (!test_bit(detail->bit, &trigger_data->mode))
> +			continue;
> +
> +		/* Hardware only mode enabled on software controlled led */
> +		if (led_cdev->blink_mode == SOFTWARE_CONTROLLED &&
> +		    detail->hardware_only)
> +			return false;
> +
> +		/* Check if the mode supports hardware mode */
> +		if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
> +			/* With a net dev set, force software mode.
> +			 * With modes are handled by hardware, led will blink
> +			 * based on his own events and will ignore any event
> +			 * from the provided dev.
> +			 */
> +			if (trigger_data->net_dev) {
> +				force_sw = true;
> +				continue;
> +			}
> +
> +			/* With empty dev, check if the mode is supported */
> +			if (led_trigger_blink_mode_is_supported(led_cdev, detail->bit))
> +				hw_blink_mode_supported |= BIT(detail->bit);
> +		}
> +	}
> +
> +	/* We can't run modes handled by both software and hardware.
> +	 * Check if we run hardware modes and check if all the modes
> +	 * can be handled by hardware.
> +	 */
> +	if (hw_blink_mode_supported && hw_blink_mode_supported != trigger_data->mode)
> +		return false;
> +
> +	/* Modes are valid. Decide now the running mode to later
> +	 * set the baseline.
> +	 * Software mode is enforced with net_dev set. With an empty
> +	 * one hardware mode is selected by default (if supported).
> +	 */
> +	if (force_sw || led_cdev->blink_mode == SOFTWARE_CONTROLLED)
> +		trigger_data->blink_mode = SOFTWARE_CONTROLLED;
> +	else
> +		trigger_data->blink_mode = HARDWARE_CONTROLLED;
> +
> +	return true;
> +}
> +
>  static void set_baseline_state(struct led_netdev_data *trigger_data)
>  {
> +	int i;
>  	int current_brightness;
> +	struct netdev_led_attr_detail *detail;
>  	struct led_classdev *led_cdev = trigger_data->led_cdev;
>  
> +	/* Modes already validated. Directly apply hw trigger modes */
> +	if (trigger_data->blink_mode == HARDWARE_CONTROLLED) {
> +		/* We are refreshing the blink modes. Reset them */
> +		led_cdev->hw_control_configure(led_cdev, BIT(TRIGGER_NETDEV_LINK),
> +					       BLINK_MODE_ZERO);
> +
> +		for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> +			detail = &attr_details[i];
> +
> +			if (!test_bit(detail->bit, &trigger_data->mode))
> +				continue;
> +
> +			led_cdev->hw_control_configure(led_cdev, BIT(detail->bit),
> +						       BLINK_MODE_ENABLE);
> +		}
> +
> +		led_cdev->hw_control_start(led_cdev);
> +
> +		return;
> +	}
> +
> +	/* Handle trigger modes by software */
>  	current_brightness = led_cdev->brightness;
>  	if (current_brightness)
>  		led_cdev->blink_brightness = current_brightness;
> @@ -100,10 +195,15 @@ static ssize_t device_name_store(struct device *dev,
>  				 size_t size)
>  {
>  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> +	struct net_device *old_net = trigger_data->net_dev;
> +	char old_device_name[IFNAMSIZ];
>  
>  	if (size >= IFNAMSIZ)
>  		return -EINVAL;
>  
> +	/* Backup old device name */
> +	memcpy(old_device_name, trigger_data->device_name, IFNAMSIZ);
> +
>  	cancel_delayed_work_sync(&trigger_data->work);
>  
>  	spin_lock_bh(&trigger_data->lock);
> @@ -122,6 +222,19 @@ static ssize_t device_name_store(struct device *dev,
>  		trigger_data->net_dev =
>  		    dev_get_by_name(&init_net, trigger_data->device_name);
>  
> +	if (!validate_baseline_state(trigger_data)) {
> +		/* Restore old net_dev and device_name */
> +		if (trigger_data->net_dev)
> +			dev_put(trigger_data->net_dev);
> +
> +		dev_hold(old_net);
> +		trigger_data->net_dev = old_net;
> +		memcpy(trigger_data->device_name, old_device_name, IFNAMSIZ);
> +
> +		spin_unlock_bh(&trigger_data->lock);
> +		return -EINVAL;

I'm not sure this is the best way... putting the net_dev but holding a
reference, to leter regain the reference via dev_hold() just feels
wrong. Also, I wonder what happens if two threads try to change the
netdev together - will the read of the old device name be potentially
corrupted (since we're not holding the trigger's lock?)

Maybe instead:

+	struct net_device *old_net;
...
-	if (trigger_data->net_dev) {
-		dev_put(trigger_data->net_dev);
-		trigger_data->net_dev = NULL;
-	}
+	old_net = trigger_data->net_dev;
+	trigger_data->net_dev = NULL;
+	memcpy(old_device_name, trigger_data->device_name, IFNAMSIZ);
...
	... extract out the setup of trigger_data->device_name
...
+	if (!validate_baseline_state(trigger_data)) {
+		if (trigger_data->net_dev)
+			dev_put(trigger_data->net_dev);
+
+		/* Restore device settings */
+		trigger_data->net_dev = old_dev;
+		memcpy(trigger_data->device_name, old_device_name, IFNAMSIZ);
+		spin_unlock_bh(&trigger_data->lock);
+		return -EINVAL;
+	} else {
+		dev_put(old_net);
+	}

would be safer all round?

One thought on this approach though - if one has a PHY that supports
"activity" but not independent "rx" and "tx" activity indications
and it doesn't support software control, how would one enable activity
mode? There isn't a way to simultaneously enable both at the same
time... However, I need to check whether there are any PHYs that fall
into this category.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v7 09/11] leds: trigger: netdev: add additional hardware only triggers

[Russell King (Oracle)]

On Thu, Dec 15, 2022 at 12:54:36AM +0100, Christian Marangi wrote:
> Add additional hardware only triggers commonly supported by switch LEDs.
> 
> Additional modes:
> link_10: LED on with link up AND speed 10mbps
> link_100: LED on with link up AND speed 100mbps
> link_1000: LED on with link up AND speed 1000mbps
> half_duplex: LED on with link up AND half_duplex mode
> full_duplex: LED on with link up AND full duplex mode

Looking at Marvell 88e151x, I don't think this is usable there.
We have the option of supporting link_1000 on one of the LEDs,
link_100 on another, and link_10 on the other. It's rather rare
for all three leds to be wired though.

This is also a PHY where "activity" mode is supported (illuminated
or blinking if any traffic is transmitted or received) but may not
support individual directional traffic in hardware. However, it
does support forcing the LED on or off, so software mode can handle
those until the user selects a combination of modes that are
supported in the hardware.

> Additional blink interval modes:
> blink_2hz: LED blink on any even at 2Hz (250ms)
> blink_4hz: LED blink on any even at 4Hz (125ms)
> blink_8hz: LED blink on any even at 8Hz (62ms)

This seems too restrictive. For example, Marvell 88e151x supports
none of these, but does support 42, 84, 170, 340, 670ms.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v7 10/11] net: dsa: qca8k: add LEDs support

[Russell King (Oracle)]

Hi,

On Thu, Dec 15, 2022 at 12:54:37AM +0100, Christian Marangi wrote:
> +static int
> +qca8k_cled_hw_control_configure(struct led_classdev *ldev, unsigned long rules,
> +				enum blink_mode_cmd cmd)
> +{
> +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> +	struct led_trigger *trigger = ldev->trigger;
> +	struct qca8k_led_pattern_en reg_info;
> +	struct qca8k_priv *priv = led->priv;
> +	u32 offload_trigger = 0, mask, val;
> +	int ret;
> +
> +	/* Check trigger compatibility */
> +	if (strcmp(trigger->name, "netdev"))
> +		return -EOPNOTSUPP;
> +
> +	if (!strcmp(trigger->name, "netdev"))
> +		ret = qca8k_parse_netdev(rules, &offload_trigger, &mask);

I'm not sure how well the compiler will spot that, but as far as
readability goes, that second if() statement appears to be redundant.

> +
> +	if (ret)
> +		return ret;
> +
> +	qca8k_get_control_led_reg(led->port_num, led->led_num, &reg_info);
> +
> +	switch (cmd) {
> +	case BLINK_MODE_SUPPORTED:
> +		/* We reach this point, we are sure the trigger is supported */
> +		return 1;
> +	case BLINK_MODE_ZERO:
> +		/* We set 4hz by default */
> +		u32 default_reg = QCA8K_LED_BLINK_4HZ;
> +
> +		ret = regmap_update_bits(priv->regmap, reg_info.reg,
> +					 QCA8K_LED_RULE_MASK << reg_info.shift,
> +					 default_reg << reg_info.shift);
> +		break;
> +	case BLINK_MODE_ENABLE:
> +		ret = regmap_update_bits(priv->regmap, reg_info.reg,
> +					 mask << reg_info.shift,
> +					 offload_trigger << reg_info.shift);
> +		break;
> +	case BLINK_MODE_DISABLE:
> +		ret = regmap_update_bits(priv->regmap, reg_info.reg,
> +					 mask << reg_info.shift,
> +					 0);
> +		break;

I think it needs to be made more clear in the documentation that if
this is called with ENABLE, then _only_ those modes in flags... (or
is it now called "rules"?) are to be enabled and all other modes
should be disabled. Conversely, DISABLE is used to disable all
modes. However, if that's the case, then ZERO was misdescribed, and
should probably be called DEFAULT. At least that's the impression
that I get from the above code.

> +	case BLINK_MODE_READ:
> +		ret = regmap_read(priv->regmap, reg_info.reg, &val);
> +		if (ret)
> +			return ret;
> +
> +		val >>= reg_info.shift;
> +		val &= offload_trigger;
> +
> +		/* Special handling for LED_BLINK_2HZ */
> +		if (!val && offload_trigger == QCA8K_LED_BLINK_2HZ)
> +			val = 1;

Hmm, so if a number of different modes is in flags or rules, then
as long as one matches, this returns 1? So it's an "any of these
modes is enabled" test.

> +
> +		return val;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return ret;
> +}
> +
> +static void
> +qca8k_led_brightness_set(struct qca8k_led *led,
> +			 enum led_brightness b)
> +{
> +	struct qca8k_led_pattern_en reg_info;
> +	struct qca8k_priv *priv = led->priv;
> +	u32 val = QCA8K_LED_ALWAYS_OFF;
> +
> +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> +
> +	if (b)
> +		val = QCA8K_LED_ALWAYS_ON;
> +
> +	regmap_update_bits(priv->regmap, reg_info.reg,
> +			   GENMASK(1, 0) << reg_info.shift,
> +			   val << reg_info.shift);
> +}
> +
> +static void
> +qca8k_cled_brightness_set(struct led_classdev *ldev,
> +			  enum led_brightness b)
> +{
> +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> +
> +	return qca8k_led_brightness_set(led, b);
> +}
> +
> +static enum led_brightness
> +qca8k_led_brightness_get(struct qca8k_led *led)
> +{
> +	struct qca8k_led_pattern_en reg_info;
> +	struct qca8k_priv *priv = led->priv;
> +	u32 val;
> +	int ret;
> +
> +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> +
> +	ret = regmap_read(priv->regmap, reg_info.reg, &val);
> +	if (ret)
> +		return 0;
> +
> +	val >>= reg_info.shift;
> +	val &= GENMASK(1, 0);
> +
> +	return val > 0 ? 1 : 0;
> +}
> +
> +static enum led_brightness
> +qca8k_cled_brightness_get(struct led_classdev *ldev)
> +{
> +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> +
> +	return qca8k_led_brightness_get(led);
> +}
> +
> +static int
> +qca8k_cled_blink_set(struct led_classdev *ldev,
> +		     unsigned long *delay_on,
> +		     unsigned long *delay_off)
> +{
> +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> +	struct qca8k_led_pattern_en reg_info;
> +	struct qca8k_priv *priv = led->priv;
> +
> +	if (*delay_on == 0 && *delay_off == 0) {
> +		*delay_on = 125;
> +		*delay_off = 125;
> +	}
> +
> +	if (*delay_on != 125 || *delay_off != 125) {
> +		/* The hardware only supports blinking at 4Hz. Fall back
> +		 * to software implementation in other cases.
> +		 */
> +		return -EINVAL;
> +	}
> +
> +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> +
> +	regmap_update_bits(priv->regmap, reg_info.reg,
> +			   GENMASK(1, 0) << reg_info.shift,
> +			   QCA8K_LED_ALWAYS_BLINK_4HZ << reg_info.shift);
> +
> +	return 0;
> +}
> +
> +static int
> +qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable)
> +{
> +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> +
> +	struct qca8k_led_pattern_en reg_info;
> +	struct qca8k_priv *priv = led->priv;
> +	u32 val = QCA8K_LED_ALWAYS_OFF;
> +
> +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> +
> +	if (enable)
> +		val = QCA8K_LED_RULE_CONTROLLED;
> +
> +	return regmap_update_bits(priv->regmap, reg_info.reg,
> +				  GENMASK(1, 0) << reg_info.shift,
> +				  val << reg_info.shift);

88e151x doesn't have the ability to change in this way - we have
a register with a 4-bit field which selects the LED mode from one
of many, or forces the LED on/off/hi-z/blink.

Not specifically for this patch, but talking generally about this
approach, the other issue I forsee with this is that yes, 88e151x has
three LEDs, but the LED modes are also used to implement control
signals (e.g., on a SFP, LOS can be implemented by programming mode
0 on LED2 (which makes it indicate link or not.) If we expose all the
LEDs we run the risk of the LED subsystem trampling over that
configuration and essentially messing up such modules. So the Marvell
PHY driver would need to know when it is appropriate to expose these
things to the LED subsystem.

I guess doing it dependent on firmware description as you do in
this driver would work - if there's no firmware description, they're
not exposed.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v7 01/11] leds: add support for hardware driven LEDs

[Christian Marangi]

On Thu, Dec 15, 2022 at 04:13:03PM +0000, Russell King (Oracle) wrote:
> Hi Christian,
> 
> Thanks for the patch.
> 
> I think Andrew's email is offline at the moment.
>

Notice by gmail spamming me "I CAN'T SEND IT AHHHHH"
Holidy times I guess?

> On Thu, Dec 15, 2022 at 12:54:28AM +0100, Christian Marangi wrote:
> > +static bool led_trigger_is_supported(struct led_classdev *led_cdev,
> > +				     struct led_trigger *trigger)
> > +{
> > +	switch (led_cdev->blink_mode) {
> > +	case SOFTWARE_CONTROLLED:
> > +		if (trigger->supported_blink_modes == HARDWARE_ONLY)
> > +			return 0;
> > +		break;
> > +	case HARDWARE_CONTROLLED:
> > +		if (trigger->supported_blink_modes == SOFTWARE_ONLY)
> > +			return 0;
> > +		break;
> > +	case SOFTWARE_HARDWARE_CONTROLLED:
> > +		break;
> > +	default:
> > +		return 0;
> > +	}
> > +
> > +	return 1;
> 
> Should be returning true/false. I'm not sure I'm a fan of the style of
> this though - wouldn't the following be easier to read?
> 
> 	switch (led_cdev->blink_mode) {
> 	case SOFTWARE_CONTROLLED:
> 		return trigger->supported_blink_modes != HARDWARE_ONLY;
> 
> 	case HARDWARE_CONTROLLED:
> 		return trigger->supported_blink_modes != SOFTWARE_ONLY;
> 
> 	case SOFTWARE_HARDWARE_CONTROLLED:
> 		return true;
> 	}
> ?

Much better!

> 
> Also, does it really need a default case - without it, when the
> led_blink_modes enum is expanded and the switch statement isn't
> updated, we'll get a compiler warning which will prompt this to be
> updated - whereas, with a default case, it won't.
> 

I added the default just to mute some compiler warning. But guess if
every enum is handled the warning should not be reported.

> > @@ -188,6 +213,10 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
> >  		led_set_brightness(led_cdev, LED_OFF);
> >  	}
> >  	if (trig) {
> > +		/* Make sure the trigger support the LED blink mode */
> > +		if (!led_trigger_is_supported(led_cdev, trig))
> > +			return -EINVAL;
> 
> Shouldn't validation happen before we start taking any actions? In other
> words, before we remove the previous trigger?
> 

trigger_set first remove any trigger and set the led off. Then apply the
new trigger. So the validation is done only when a trigger is actually
applied. Think we should understand the best case here.

> > @@ -350,12 +381,26 @@ static inline bool led_sysfs_is_disabled(struct led_classdev *led_cdev)
> >  
> >  #define TRIG_NAME_MAX 50
> >  
> > +enum led_trigger_blink_supported_modes {
> > +	SOFTWARE_ONLY = SOFTWARE_CONTROLLED,
> > +	HARDWARE_ONLY = HARDWARE_CONTROLLED,
> > +	SOFTWARE_HARDWARE = SOFTWARE_HARDWARE_CONTROLLED,
> 
> I suspect all these generic names are asking for eventual namespace
> clashes. Maybe prefix them with LED_ ?

Agree they are pretty generic so I can see why... My only concern was
making them too long... Maybe reduce them to SW or HW? LEDS_SW_ONLY...
LEDS_SW_CONTROLLED?

> 
> Thanks.
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

-- 
	Ansuel

Re: [PATCH v7 01/11] leds: add support for hardware driven LEDs

[Russell King (Oracle)]

On Fri, Dec 16, 2022 at 05:45:25PM +0100, Christian Marangi wrote:
> On Thu, Dec 15, 2022 at 04:13:03PM +0000, Russell King (Oracle) wrote:
> > Hi Christian,
> > 
> > Thanks for the patch.
> > 
> > I think Andrew's email is offline at the moment.
> >
> 
> Notice by gmail spamming me "I CAN'T SEND IT AHHHHH"
> Holidy times I guess?

Sadly, Andrew's email has done this a number of times - and Andrew
used to be on IRC so I could prod him about it, but it seems he
doesn't hang out on IRC anymore. It's been like it a few days now.

> > On Thu, Dec 15, 2022 at 12:54:28AM +0100, Christian Marangi wrote:
> > > @@ -188,6 +213,10 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
> > >  		led_set_brightness(led_cdev, LED_OFF);
> > >  	}
> > >  	if (trig) {
> > > +		/* Make sure the trigger support the LED blink mode */
> > > +		if (!led_trigger_is_supported(led_cdev, trig))
> > > +			return -EINVAL;
> > 
> > Shouldn't validation happen before we start taking any actions? In other
> > words, before we remove the previous trigger?
> > 
> 
> trigger_set first remove any trigger and set the led off. Then apply the
> new trigger. So the validation is done only when a trigger is actually
> applied. Think we should understand the best case here.

I think this is a question that needs to be answered by the LEDs folk,
as it's an interface behaviour / quality of implementation issue.

> > > @@ -350,12 +381,26 @@ static inline bool led_sysfs_is_disabled(struct led_classdev *led_cdev)
> > >  
> > >  #define TRIG_NAME_MAX 50
> > >  
> > > +enum led_trigger_blink_supported_modes {
> > > +	SOFTWARE_ONLY = SOFTWARE_CONTROLLED,
> > > +	HARDWARE_ONLY = HARDWARE_CONTROLLED,
> > > +	SOFTWARE_HARDWARE = SOFTWARE_HARDWARE_CONTROLLED,
> > 
> > I suspect all these generic names are asking for eventual namespace
> > clashes. Maybe prefix them with LED_ ?
> 
> Agree they are pretty generic so I can see why... My only concern was
> making them too long... Maybe reduce them to SW or HW? LEDS_SW_ONLY...
> LEDS_SW_CONTROLLED?

Seems sensible to me - and as a bonus they get shorter than the above!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v7 02/11] leds: add function to configure hardware controlled LED

[Christian Marangi]

On Thu, Dec 15, 2022 at 04:30:49PM +0000, Russell King (Oracle) wrote:
> Hi Christian,
> 
> On Thu, Dec 15, 2022 at 12:54:29AM +0100, Christian Marangi wrote:
> > +A trigger once he declared support for hardware controlled blinks, will use the function
> > +hw_control_configure() provided by the driver to check support for a particular blink mode.
> 
> Please improve the above. I think what is actually meant is "Where a
> trigger has support for hardware controlled blink modes,
> hw_control_configure() will be used to check whether a particular blink
> mode is supported and configure the blink mode."
>

Ok I will improve!

> > +This function passes as the first argument (flag) a u32 flag.
> 
> I don't think "(flag)" is necessary, as I think "a u32 flag"
> sufficiently suggests that it's called "flag". In any case, it doesn't
> appear to be a "u32" but an "unsigned long".
> 

Will drop flag and fix the type.

> > +The second argument (cmd) of hw_control_configure() method can be used to do various
> > +operations for the specific blink mode. We currently support ENABLE, DISABLE, READ, ZERO
> > +and SUPPORTED to enable, disable, read the state of the blink mode, ask the LED
> > +driver if it does supports the specific blink mode and to reset any blink mode active.
> > +
> > +In ENABLE/DISABLE hw_control_configure() should configure the LED to enable/disable the
> > +requested blink mode (flag).
> > +In READ hw_control_configure() should return 0 or 1 based on the status of the requested
> > +blink mode (flag).
> > +In SUPPORTED hw_control_configure() should return 0 or 1 if the LED driver supports the
> > +requested blink mode (flags) or not.
> > +In ZERO hw_control_configure() should return 0 with success operation or error.
> 
> I think some kind of tabular description of this would be better.
> Something like this but on docbook format:
> 
> hw_control_configure()'s second argument, cmd, is used to specify
> various operations for the LED blink mode, and will be one of:
> 
> ENABLE - to enable the blink mode requested in flag. Returns ?
> DISABLE - to disable the blink mode requested in flag. Returbns ?
> READ - to indicate whether the blink mode requested in flag is enabled.
>        Returns 0 if disabled or 1 if enabled.
> SUPPORTED - to indicate whether the blink mode requested in flag is
>             supported. Returns 0 if unsupported or 1 if supported.
> ZERO - to disable all blink modes. Returns 0 or negative errno.
> 
> The problem with the way you've listed it is you've listed the
> operations in a different order to the description in the same sentence,
> so effectiely ZERO means to report whether supported and SUPPORTED means
> to reset all blink modes!
> 
> > +
> > +The unsigned long flag is specific to the trigger and change across them. It's in the LED
> > +driver interest know how to elaborate this flag and to declare support for a
> > +particular trigger.
> 
> Hmm, as a casual observer, this doesn't really give much information.
> Does this mean that it's up to the hardware LED driver to decide what
> each bit in the "flag" argument means? If not, I think this needs to
> be worded better!
> 

The idea behind this is that the leds driver needs to have some code to
parse the flag provided by the supported trigger...

Example:
- netdev trigger provide flag with BLINK_TX BLINK_RX
- driver needs to have explicit support for netdev trigger and will
  parse the passed flag to enable the function internally.

So no the driver needs to just reflect what it was requested by the
trigger. It's the trigger the one that define flags structure.

Ideally the driver will just include the trigger header and refer to the
same bits the trigger declare in the flag.

> > For this exact reason explicit support for the specific
> > +trigger is mandatory or the driver returns -EOPNOTSUPP if asked to enter offload mode
> > +with a not supported trigger.
> 
> Seems to be a change in terminology - weren't we using "HARDWARE" and
> "SOFTWARE" to describe the mode, rather than "offload" ?
> 

Will fix!

> > +If the driver returns -EOPNOTSUPP on hw_control_configure(), the trigger activation will
> > +fail as the driver doesn't support that specific offload trigger or doesn't know
> > +how to handle the provided flags.
> 
> This gets rather ambiguous. When can -EOPNOTSUPP be returned - for which
> cmds? Surely, if we have already tested for support using the SUPPORTED
> cmd which returns a 0/1 value, we should not be going on to trigger a
> request to enable something that isn't supported?
> 

Currently we report -EOPNOTSUPP when a trigger is not
supported. hw_control_start/stop/status is just related to activate the
hw_control but not configuring it. In old implementation it was
suggested to have this kind of split and separation to not overload the
configure function and have them split.

(configure enable/disable are about specific trigger rules not the hw
control mode)

I will try to refactor this to be more explicit.

> > +
> >  Known Issues
> >  ============
> >  
> > diff --git a/include/linux/leds.h b/include/linux/leds.h
> > index 09ff1dc6f48d..b5aad67fecfb 100644
> > --- a/include/linux/leds.h
> > +++ b/include/linux/leds.h
> > @@ -73,6 +73,16 @@ enum led_blink_modes {
> >  	SOFTWARE_HARDWARE_CONTROLLED,
> >  };
> >  
> > +#ifdef CONFIG_LEDS_HARDWARE_CONTROL
> > +enum blink_mode_cmd {
> > +	BLINK_MODE_ENABLE, /* Enable the hardware blink mode */
> > +	BLINK_MODE_DISABLE, /* Disable the hardware blink mode */
> > +	BLINK_MODE_READ, /* Read the status of the hardware blink mode */
> > +	BLINK_MODE_SUPPORTED, /* Ask the driver if the hardware blink mode is supported */
> > +	BLINK_MODE_ZERO, /* Disable any hardware blink active */
> > +};
> > +#endif
> 
> Generally not a good idea to make definitions in header files
> conditional on configuration symbols - it makes build-testing more
> problematical.

Guess I will have to add namespace tag and drop the ifdef.

> 
> Thanks.
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

-- 
	Ansuel

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Christian Marangi]

On Thu, Dec 15, 2022 at 04:27:17PM +0100, Alexander Stein wrote:
> Hi,
> 
> thanks for the v7 series.
> 
> Am Donnerstag, 15. Dezember 2022, 00:54:33 CET schrieb Christian Marangi:
> > Add hardware control support for the Netdev trigger.
> > The trigger on config change will check if the requested trigger can set
> > to blink mode using LED hardware mode and if every blink mode is supported,
> > the trigger will enable hardware mode with the requested configuration.
> > If there is at least one trigger that is not supported and can't run in
> > hardware mode, then software mode will be used instead.
> > A validation is done on every value change and on fail the old value is
> > restored and -EINVAL is returned.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> >  drivers/leds/trigger/ledtrig-netdev.c | 155 +++++++++++++++++++++++++-
> >  1 file changed, 149 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/leds/trigger/ledtrig-netdev.c
> > b/drivers/leds/trigger/ledtrig-netdev.c index dd63cadb896e..ed019cb5867c
> > 100644
> > --- a/drivers/leds/trigger/ledtrig-netdev.c
> > +++ b/drivers/leds/trigger/ledtrig-netdev.c
> > @@ -37,6 +37,7 @@
> >   */
> > 
> >  struct led_netdev_data {
> > +	enum led_blink_modes blink_mode;
> >  	spinlock_t lock;
> > 
> >  	struct delayed_work work;
> > @@ -53,11 +54,105 @@ struct led_netdev_data {
> >  	bool carrier_link_up;
> >  };
> > 
> > +struct netdev_led_attr_detail {
> > +	char *name;
> > +	bool hardware_only;
> > +	enum led_trigger_netdev_modes bit;
> > +};
> > +
> > +static struct netdev_led_attr_detail attr_details[] = {
> > +	{ .name = "link", .bit = TRIGGER_NETDEV_LINK},
> > +	{ .name = "tx", .bit = TRIGGER_NETDEV_TX},
> > +	{ .name = "rx", .bit = TRIGGER_NETDEV_RX},
> > +};
> > +
> > +static bool validate_baseline_state(struct led_netdev_data *trigger_data)
> > +{
> > +	struct led_classdev *led_cdev = trigger_data->led_cdev;
> > +	struct netdev_led_attr_detail *detail;
> > +	u32 hw_blink_mode_supported = 0;
> > +	bool force_sw = false;
> > +	int i;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> > +		detail = &attr_details[i];
> > +
> > +		/* Mode not active, skip */
> > +		if (!test_bit(detail->bit, &trigger_data->mode))
> > +			continue;
> > +
> > +		/* Hardware only mode enabled on software controlled led 
> */
> > +		if (led_cdev->blink_mode == SOFTWARE_CONTROLLED &&
> > +		    detail->hardware_only)
> > +			return false;
> > +
> > +		/* Check if the mode supports hardware mode */
> > +		if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
> > +			/* With a net dev set, force software mode.
> > +			 * With modes are handled by hardware, led will 
> blink
> > +			 * based on his own events and will ignore any 
> event
> > +			 * from the provided dev.
> > +			 */
> > +			if (trigger_data->net_dev) {
> > +				force_sw = true;
> > +				continue;
> > +			}
> > +
> > +			/* With empty dev, check if the mode is 
> supported */
> > +			if 
> (led_trigger_blink_mode_is_supported(led_cdev, detail->bit))
> > +				hw_blink_mode_supported |= BIT(detail-
> >bit);
> 
> Shouldn't this be BIT(detail->bit)?
>

I think I didn't understand?

> > +		}
> > +	}
> > +
> > +	/* We can't run modes handled by both software and hardware.
> > +	 * Check if we run hardware modes and check if all the modes
> > +	 * can be handled by hardware.
> > +	 */
> > +	if (hw_blink_mode_supported && hw_blink_mode_supported !=
> > trigger_data->mode) +		return false;
> > +
> > +	/* Modes are valid. Decide now the running mode to later
> > +	 * set the baseline.
> > +	 * Software mode is enforced with net_dev set. With an empty
> > +	 * one hardware mode is selected by default (if supported).
> > +	 */
> > +	if (force_sw || led_cdev->blink_mode == SOFTWARE_CONTROLLED)
> 
> IMHO '|| !hw_blink_mode_supported' should be added here for blink_modes. This 
> might happen if a PHY LED is SOFTWARE_HARDWARE_CONTROLLED, but some blink mode 
> is not supported by hardware, thus hw_blink_mode_supported=0.
> 

Will check this and report back.

> Best regards,
> Alexander
> 
> > +		trigger_data->blink_mode = SOFTWARE_CONTROLLED;
> > +	else
> > +		trigger_data->blink_mode = HARDWARE_CONTROLLED;
> > +
> > +	return true;
> > +}
> > +
> >  static void set_baseline_state(struct led_netdev_data *trigger_data)
> >  {
> > +	int i;
> >  	int current_brightness;
> > +	struct netdev_led_attr_detail *detail;
> >  	struct led_classdev *led_cdev = trigger_data->led_cdev;
> > 
> > +	/* Modes already validated. Directly apply hw trigger modes */
> > +	if (trigger_data->blink_mode == HARDWARE_CONTROLLED) {
> > +		/* We are refreshing the blink modes. Reset them */
> > +		led_cdev->hw_control_configure(led_cdev, 
> BIT(TRIGGER_NETDEV_LINK),
> > +					       BLINK_MODE_ZERO);
> > +
> > +		for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> > +			detail = &attr_details[i];
> > +
> > +			if (!test_bit(detail->bit, &trigger_data->mode))
> > +				continue;
> > +
> > +			led_cdev->hw_control_configure(led_cdev, 
> BIT(detail->bit),
> > +						       
> BLINK_MODE_ENABLE);
> 
> Shouldn't this be BIT(detail->bit)?
> 
> > +		}
> > +
> > +		led_cdev->hw_control_start(led_cdev);
> > +
> > +		return;
> > +	}
> > +
> > +	/* Handle trigger modes by software */
> >  	current_brightness = led_cdev->brightness;
> >  	if (current_brightness)
> >  		led_cdev->blink_brightness = current_brightness;
> > @@ -100,10 +195,15 @@ static ssize_t device_name_store(struct device *dev,
> >  				 size_t size)
> >  {
> >  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> > +	struct net_device *old_net = trigger_data->net_dev;
> > +	char old_device_name[IFNAMSIZ];
> > 
> >  	if (size >= IFNAMSIZ)
> >  		return -EINVAL;
> > 
> > +	/* Backup old device name */
> > +	memcpy(old_device_name, trigger_data->device_name, IFNAMSIZ);
> > +
> >  	cancel_delayed_work_sync(&trigger_data->work);
> > 
> >  	spin_lock_bh(&trigger_data->lock);
> > @@ -122,6 +222,19 @@ static ssize_t device_name_store(struct device *dev,
> >  		trigger_data->net_dev =
> >  		    dev_get_by_name(&init_net, trigger_data->device_name);
> > 
> > +	if (!validate_baseline_state(trigger_data)) {
> > +		/* Restore old net_dev and device_name */
> > +		if (trigger_data->net_dev)
> > +			dev_put(trigger_data->net_dev);
> > +
> > +		dev_hold(old_net);
> > +		trigger_data->net_dev = old_net;
> > +		memcpy(trigger_data->device_name, old_device_name, 
> IFNAMSIZ);
> > +
> > +		spin_unlock_bh(&trigger_data->lock);
> > +		return -EINVAL;
> > +	}
> > +
> >  	trigger_data->carrier_link_up = false;
> >  	if (trigger_data->net_dev != NULL)
> >  		trigger_data->carrier_link_up = 
> netif_carrier_ok(trigger_data->net_dev);
> > @@ -159,7 +272,7 @@ static ssize_t netdev_led_attr_store(struct device *dev,
> > const char *buf, size_t size, enum led_trigger_netdev_modes attr)
> >  {
> >  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> > -	unsigned long state;
> > +	unsigned long state, old_mode = trigger_data->mode;
> >  	int ret;
> >  	int bit;
> > 
> > @@ -184,6 +297,12 @@ static ssize_t netdev_led_attr_store(struct device
> > *dev, const char *buf, else
> >  		clear_bit(bit, &trigger_data->mode);
> > 
> > +	if (!validate_baseline_state(trigger_data)) {
> > +		/* Restore old mode on validation fail */
> > +		trigger_data->mode = old_mode;
> > +		return -EINVAL;
> > +	}
> > +
> >  	set_baseline_state(trigger_data);
> > 
> >  	return size;
> > @@ -220,6 +339,8 @@ static ssize_t interval_store(struct device *dev,
> >  			      size_t size)
> >  {
> >  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> > +	int old_interval = atomic_read(&trigger_data->interval);
> > +	u32 old_mode = trigger_data->mode;
> >  	unsigned long value;
> >  	int ret;
> > 
> > @@ -228,13 +349,22 @@ static ssize_t interval_store(struct device *dev,
> >  		return ret;
> > 
> >  	/* impose some basic bounds on the timer interval */
> > -	if (value >= 5 && value <= 10000) {
> > -		cancel_delayed_work_sync(&trigger_data->work);
> > +	if (value < 5 || value > 10000)
> > +		return -EINVAL;
> > +
> > +	cancel_delayed_work_sync(&trigger_data->work);
> > +
> > +	atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
> > 
> > -		atomic_set(&trigger_data->interval, 
> msecs_to_jiffies(value));
> > -		set_baseline_state(trigger_data);	/* resets timer 
> */
> > +	if (!validate_baseline_state(trigger_data)) {
> > +		/* Restore old interval on validation error */
> > +		atomic_set(&trigger_data->interval, old_interval);
> > +		trigger_data->mode = old_mode;
> > +		return -EINVAL;
> >  	}
> > 
> > +	set_baseline_state(trigger_data);	/* resets timer */
> > +
> >  	return size;
> >  }
> > 
> > @@ -368,13 +498,25 @@ static int netdev_trig_activate(struct led_classdev
> > *led_cdev) trigger_data->mode = 0;
> >  	atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
> >  	trigger_data->last_activity = 0;
> > +	if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
> > +		/* With hw mode enabled reset any rule set by default */
> > +		if (led_cdev->hw_control_status(led_cdev)) {
> > +			rc = led_cdev->hw_control_configure(led_cdev, 
> BIT(TRIGGER_NETDEV_LINK),
> > +							    
> BLINK_MODE_ZERO);
> > +			if (rc)
> > +				goto err;
> > +		}
> > +	}
> > 
> >  	led_set_trigger_data(led_cdev, trigger_data);
> > 
> >  	rc = register_netdevice_notifier(&trigger_data->notifier);
> >  	if (rc)
> > -		kfree(trigger_data);
> > +		goto err;
> > 
> > +	return 0;
> > +err:
> > +	kfree(trigger_data);
> >  	return rc;
> >  }
> > 
> > @@ -394,6 +536,7 @@ static void netdev_trig_deactivate(struct led_classdev
> > *led_cdev)
> > 
> >  static struct led_trigger netdev_led_trigger = {
> >  	.name = "netdev",
> > +	.supported_blink_modes = SOFTWARE_HARDWARE,
> >  	.activate = netdev_trig_activate,
> >  	.deactivate = netdev_trig_deactivate,
> >  	.groups = netdev_trig_groups,
> 
> 
> 
> 

-- 
	Ansuel

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Christian Marangi]

On Thu, Dec 15, 2022 at 05:07:31PM +0000, Russell King (Oracle) wrote:
> On Thu, Dec 15, 2022 at 12:54:33AM +0100, Christian Marangi wrote:
> > Add hardware control support for the Netdev trigger.
> > The trigger on config change will check if the requested trigger can set
> > to blink mode using LED hardware mode and if every blink mode is supported,
> > the trigger will enable hardware mode with the requested configuration.
> > If there is at least one trigger that is not supported and can't run in
> > hardware mode, then software mode will be used instead.
> > A validation is done on every value change and on fail the old value is
> > restored and -EINVAL is returned.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> >  drivers/leds/trigger/ledtrig-netdev.c | 155 +++++++++++++++++++++++++-
> >  1 file changed, 149 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
> > index dd63cadb896e..ed019cb5867c 100644
> > --- a/drivers/leds/trigger/ledtrig-netdev.c
> > +++ b/drivers/leds/trigger/ledtrig-netdev.c
> > @@ -37,6 +37,7 @@
> >   */
> >  
> >  struct led_netdev_data {
> > +	enum led_blink_modes blink_mode;
> >  	spinlock_t lock;
> >  
> >  	struct delayed_work work;
> > @@ -53,11 +54,105 @@ struct led_netdev_data {
> >  	bool carrier_link_up;
> >  };
> >  
> > +struct netdev_led_attr_detail {
> > +	char *name;
> > +	bool hardware_only;
> > +	enum led_trigger_netdev_modes bit;
> > +};
> > +
> > +static struct netdev_led_attr_detail attr_details[] = {
> > +	{ .name = "link", .bit = TRIGGER_NETDEV_LINK},
> > +	{ .name = "tx", .bit = TRIGGER_NETDEV_TX},
> > +	{ .name = "rx", .bit = TRIGGER_NETDEV_RX},
> > +};
> > +
> > +static bool validate_baseline_state(struct led_netdev_data *trigger_data)
> > +{
> > +	struct led_classdev *led_cdev = trigger_data->led_cdev;
> > +	struct netdev_led_attr_detail *detail;
> > +	u32 hw_blink_mode_supported = 0;
> > +	bool force_sw = false;
> > +	int i;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> > +		detail = &attr_details[i];
> > +
> > +		/* Mode not active, skip */
> > +		if (!test_bit(detail->bit, &trigger_data->mode))
> > +			continue;
> > +
> > +		/* Hardware only mode enabled on software controlled led */
> > +		if (led_cdev->blink_mode == SOFTWARE_CONTROLLED &&
> > +		    detail->hardware_only)
> > +			return false;
> > +
> > +		/* Check if the mode supports hardware mode */
> > +		if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
> > +			/* With a net dev set, force software mode.
> > +			 * With modes are handled by hardware, led will blink
> > +			 * based on his own events and will ignore any event
> > +			 * from the provided dev.
> > +			 */
> > +			if (trigger_data->net_dev) {
> > +				force_sw = true;
> > +				continue;
> > +			}
> > +
> > +			/* With empty dev, check if the mode is supported */
> > +			if (led_trigger_blink_mode_is_supported(led_cdev, detail->bit))
> > +				hw_blink_mode_supported |= BIT(detail->bit);
> > +		}
> > +	}
> > +
> > +	/* We can't run modes handled by both software and hardware.
> > +	 * Check if we run hardware modes and check if all the modes
> > +	 * can be handled by hardware.
> > +	 */
> > +	if (hw_blink_mode_supported && hw_blink_mode_supported != trigger_data->mode)
> > +		return false;
> > +
> > +	/* Modes are valid. Decide now the running mode to later
> > +	 * set the baseline.
> > +	 * Software mode is enforced with net_dev set. With an empty
> > +	 * one hardware mode is selected by default (if supported).
> > +	 */
> > +	if (force_sw || led_cdev->blink_mode == SOFTWARE_CONTROLLED)
> > +		trigger_data->blink_mode = SOFTWARE_CONTROLLED;
> > +	else
> > +		trigger_data->blink_mode = HARDWARE_CONTROLLED;
> > +
> > +	return true;
> > +}
> > +
> >  static void set_baseline_state(struct led_netdev_data *trigger_data)
> >  {
> > +	int i;
> >  	int current_brightness;
> > +	struct netdev_led_attr_detail *detail;
> >  	struct led_classdev *led_cdev = trigger_data->led_cdev;
> >  
> > +	/* Modes already validated. Directly apply hw trigger modes */
> > +	if (trigger_data->blink_mode == HARDWARE_CONTROLLED) {
> > +		/* We are refreshing the blink modes. Reset them */
> > +		led_cdev->hw_control_configure(led_cdev, BIT(TRIGGER_NETDEV_LINK),
> > +					       BLINK_MODE_ZERO);
> > +
> > +		for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> > +			detail = &attr_details[i];
> > +
> > +			if (!test_bit(detail->bit, &trigger_data->mode))
> > +				continue;
> > +
> > +			led_cdev->hw_control_configure(led_cdev, BIT(detail->bit),
> > +						       BLINK_MODE_ENABLE);
> > +		}
> > +
> > +		led_cdev->hw_control_start(led_cdev);
> > +
> > +		return;
> > +	}
> > +
> > +	/* Handle trigger modes by software */
> >  	current_brightness = led_cdev->brightness;
> >  	if (current_brightness)
> >  		led_cdev->blink_brightness = current_brightness;
> > @@ -100,10 +195,15 @@ static ssize_t device_name_store(struct device *dev,
> >  				 size_t size)
> >  {
> >  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> > +	struct net_device *old_net = trigger_data->net_dev;
> > +	char old_device_name[IFNAMSIZ];
> >  
> >  	if (size >= IFNAMSIZ)
> >  		return -EINVAL;
> >  
> > +	/* Backup old device name */
> > +	memcpy(old_device_name, trigger_data->device_name, IFNAMSIZ);
> > +
> >  	cancel_delayed_work_sync(&trigger_data->work);
> >  
> >  	spin_lock_bh(&trigger_data->lock);
> > @@ -122,6 +222,19 @@ static ssize_t device_name_store(struct device *dev,
> >  		trigger_data->net_dev =
> >  		    dev_get_by_name(&init_net, trigger_data->device_name);
> >  
> > +	if (!validate_baseline_state(trigger_data)) {
> > +		/* Restore old net_dev and device_name */
> > +		if (trigger_data->net_dev)
> > +			dev_put(trigger_data->net_dev);
> > +
> > +		dev_hold(old_net);
> > +		trigger_data->net_dev = old_net;
> > +		memcpy(trigger_data->device_name, old_device_name, IFNAMSIZ);
> > +
> > +		spin_unlock_bh(&trigger_data->lock);
> > +		return -EINVAL;
> 
> I'm not sure this is the best way... putting the net_dev but holding a
> reference, to leter regain the reference via dev_hold() just feels
> wrong. Also, I wonder what happens if two threads try to change the
> netdev together - will the read of the old device name be potentially
> corrupted (since we're not holding the trigger's lock?)
> 
> Maybe instead:
> 
> +	struct net_device *old_net;
> ...
> -	if (trigger_data->net_dev) {
> -		dev_put(trigger_data->net_dev);
> -		trigger_data->net_dev = NULL;
> -	}
> +	old_net = trigger_data->net_dev;
> +	trigger_data->net_dev = NULL;
> +	memcpy(old_device_name, trigger_data->device_name, IFNAMSIZ);
> ...
> 	... extract out the setup of trigger_data->device_name
> ...
> +	if (!validate_baseline_state(trigger_data)) {
> +		if (trigger_data->net_dev)
> +			dev_put(trigger_data->net_dev);
> +
> +		/* Restore device settings */
> +		trigger_data->net_dev = old_dev;
> +		memcpy(trigger_data->device_name, old_device_name, IFNAMSIZ);
> +		spin_unlock_bh(&trigger_data->lock);
> +		return -EINVAL;
> +	} else {
> +		dev_put(old_net);
> +	}
> 
> would be safer all round?

Need to check but if I'm not wrong all this thing was to handle the very
corner case where net can be removed while we are changing trigger and
something goes wrong down the line... Holding that means it won't get
actually removed till everything is ok.

> 
> One thought on this approach though - if one has a PHY that supports
> "activity" but not independent "rx" and "tx" activity indications
> and it doesn't support software control, how would one enable activity
> mode? There isn't a way to simultaneously enable both at the same
> time... However, I need to check whether there are any PHYs that fall
> into this category.
>

Problem is that for such feature and to have at least something working
we need to face compromise. We really can't support each switch feature
and have a generic API for everything. My original idea was to have
something VERY dynamic with a totally dedicated and dumb trigger... But
that was NACK as netdev was the correct way to handle these stuff...

But adapting everything to netdev trigger is hard since you have just
another generic abstraction layer. My idea at times was that in such
case the trigger rule will be rejected and only enabled if both tx and
rx were enabled. An alternative is to add another flag for activity
rule. (for switch supporting independent tx and rx with activity rule
enable both tx and rx event are enabled. for switch not supporting
independent tx and rx just fallback to sw and say that the mode is not
suported.)

I already had the idea of Documenting all this case but if we decide to
follow this approach then creating a schema file is a must at this
point. (but wanted to introduce that later if and ever this feature will
be accepted to permit to set trigger rules directly in DT following
something like linux,default-trigger.

-- 
	Ansuel

Re: [PATCH v7 09/11] leds: trigger: netdev: add additional hardware only triggers

[Christian Marangi]

On Thu, Dec 15, 2022 at 05:35:47PM +0000, Russell King (Oracle) wrote:
> On Thu, Dec 15, 2022 at 12:54:36AM +0100, Christian Marangi wrote:
> > Add additional hardware only triggers commonly supported by switch LEDs.
> > 
> > Additional modes:
> > link_10: LED on with link up AND speed 10mbps
> > link_100: LED on with link up AND speed 100mbps
> > link_1000: LED on with link up AND speed 1000mbps
> > half_duplex: LED on with link up AND half_duplex mode
> > full_duplex: LED on with link up AND full duplex mode
> 
> Looking at Marvell 88e151x, I don't think this is usable there.
> We have the option of supporting link_1000 on one of the LEDs,
> link_100 on another, and link_10 on the other. It's rather rare
> for all three leds to be wired though.

On qca8k it's just anarchy. You can apply the same rule table to
whatever led you want. They are all the same... OEM decide what to do
(add white led, amber, green...)

Most common configuration is 2 leds, one react with port 1000 and the
other with port 100. But each led can be set to be powered on to any
speed by enabling 10 100 and 1000 rule.

Rejecting a configuration falls in the driver returning error on
configure.

> 
> This is also a PHY where "activity" mode is supported (illuminated
> or blinking if any traffic is transmitted or received) but may not
> support individual directional traffic in hardware. However, it
> does support forcing the LED on or off, so software mode can handle
> those until the user selects a combination of modes that are
> supported in the hardware.
> 
> > Additional blink interval modes:
> > blink_2hz: LED blink on any even at 2Hz (250ms)
> > blink_4hz: LED blink on any even at 4Hz (125ms)
> > blink_8hz: LED blink on any even at 8Hz (62ms)
> 
> This seems too restrictive. For example, Marvell 88e151x supports
> none of these, but does support 42, 84, 170, 340, 670ms.
> 

Eh this is really bad, it was an idea to support blink internal for each
event but I expected other switch had something different... But the
generic function is still there...

Wonder if we should consider adding generic naming like SLOW, NORMAL(?),
FAST. And just assign them from the driver side?

Permit to have some kind of configuration while also keeping it generic
enough? 

Just as reference... The blink mode already had a compromise since qca8k
can support a way to blink differently based on the link speed.

-- 
	Ansuel

Re: [PATCH v7 10/11] net: dsa: qca8k: add LEDs support

[Christian Marangi]

On Thu, Dec 15, 2022 at 05:49:57PM +0000, Russell King (Oracle) wrote:
> Hi,
> 
> On Thu, Dec 15, 2022 at 12:54:37AM +0100, Christian Marangi wrote:
> > +static int
> > +qca8k_cled_hw_control_configure(struct led_classdev *ldev, unsigned long rules,
> > +				enum blink_mode_cmd cmd)
> > +{
> > +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> > +	struct led_trigger *trigger = ldev->trigger;
> > +	struct qca8k_led_pattern_en reg_info;
> > +	struct qca8k_priv *priv = led->priv;
> > +	u32 offload_trigger = 0, mask, val;
> > +	int ret;
> > +
> > +	/* Check trigger compatibility */
> > +	if (strcmp(trigger->name, "netdev"))
> > +		return -EOPNOTSUPP;
> > +
> > +	if (!strcmp(trigger->name, "netdev"))
> > +		ret = qca8k_parse_netdev(rules, &offload_trigger, &mask);
> 
> I'm not sure how well the compiler will spot that, but as far as
> readability goes, that second if() statement appears to be redundant.
>

Leftover when the driver supported 2 trigger. The idea was to provide a
"template" to show the flow of the function.

> > +
> > +	if (ret)
> > +		return ret;
> > +
> > +	qca8k_get_control_led_reg(led->port_num, led->led_num, &reg_info);
> > +
> > +	switch (cmd) {
> > +	case BLINK_MODE_SUPPORTED:
> > +		/* We reach this point, we are sure the trigger is supported */
> > +		return 1;
> > +	case BLINK_MODE_ZERO:
> > +		/* We set 4hz by default */
> > +		u32 default_reg = QCA8K_LED_BLINK_4HZ;
> > +
> > +		ret = regmap_update_bits(priv->regmap, reg_info.reg,
> > +					 QCA8K_LED_RULE_MASK << reg_info.shift,
> > +					 default_reg << reg_info.shift);
> > +		break;
> > +	case BLINK_MODE_ENABLE:
> > +		ret = regmap_update_bits(priv->regmap, reg_info.reg,
> > +					 mask << reg_info.shift,
> > +					 offload_trigger << reg_info.shift);
> > +		break;
> > +	case BLINK_MODE_DISABLE:
> > +		ret = regmap_update_bits(priv->regmap, reg_info.reg,
> > +					 mask << reg_info.shift,
> > +					 0);
> > +		break;
> 
> I think it needs to be made more clear in the documentation that if
> this is called with ENABLE, then _only_ those modes in flags... (or
> is it now called "rules"?) are to be enabled and all other modes
> should be disabled. Conversely, DISABLE is used to disable all
> modes. However, if that's the case, then ZERO was misdescribed, and
> should probably be called DEFAULT. At least that's the impression
> that I get from the above code.
> 

ZERO disable all the rules. Driver can keep some rule enabled (this is
the case for qca8k blink mode at 4hz by default)

ENABLE/DISABLE only act on the provided thing in rules. In the current
imlementation parse rules, generate a mask and update the values
accordingly. Other rules are not touched. This is based on the fact that
the first and the last thing done is calling ZERO to reset all the rules
to a known state.

I will try to improve the Documentation on this aspect.
Hope you know understand better the calling flow.

> > +	case BLINK_MODE_READ:
> > +		ret = regmap_read(priv->regmap, reg_info.reg, &val);
> > +		if (ret)
> > +			return ret;
> > +
> > +		val >>= reg_info.shift;
> > +		val &= offload_trigger;
> > +
> > +		/* Special handling for LED_BLINK_2HZ */
> > +		if (!val && offload_trigger == QCA8K_LED_BLINK_2HZ)
> > +			val = 1;
> 
> Hmm, so if a number of different modes is in flags or rules, then
> as long as one matches, this returns 1? So it's an "any of these
> modes is enabled" test.
> 

Ok this should be changed and you are right. READ should return true or
false if the rule (or rules) are enabled. This work for a single rule
but doesn't if multiple rules are provided.

Will fix that since this is wrong.

> > +
> > +		return val;
> > +	default:
> > +		return -EOPNOTSUPP;
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static void
> > +qca8k_led_brightness_set(struct qca8k_led *led,
> > +			 enum led_brightness b)
> > +{
> > +	struct qca8k_led_pattern_en reg_info;
> > +	struct qca8k_priv *priv = led->priv;
> > +	u32 val = QCA8K_LED_ALWAYS_OFF;
> > +
> > +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> > +
> > +	if (b)
> > +		val = QCA8K_LED_ALWAYS_ON;
> > +
> > +	regmap_update_bits(priv->regmap, reg_info.reg,
> > +			   GENMASK(1, 0) << reg_info.shift,
> > +			   val << reg_info.shift);
> > +}
> > +
> > +static void
> > +qca8k_cled_brightness_set(struct led_classdev *ldev,
> > +			  enum led_brightness b)
> > +{
> > +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> > +
> > +	return qca8k_led_brightness_set(led, b);
> > +}
> > +
> > +static enum led_brightness
> > +qca8k_led_brightness_get(struct qca8k_led *led)
> > +{
> > +	struct qca8k_led_pattern_en reg_info;
> > +	struct qca8k_priv *priv = led->priv;
> > +	u32 val;
> > +	int ret;
> > +
> > +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> > +
> > +	ret = regmap_read(priv->regmap, reg_info.reg, &val);
> > +	if (ret)
> > +		return 0;
> > +
> > +	val >>= reg_info.shift;
> > +	val &= GENMASK(1, 0);
> > +
> > +	return val > 0 ? 1 : 0;
> > +}
> > +
> > +static enum led_brightness
> > +qca8k_cled_brightness_get(struct led_classdev *ldev)
> > +{
> > +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> > +
> > +	return qca8k_led_brightness_get(led);
> > +}
> > +
> > +static int
> > +qca8k_cled_blink_set(struct led_classdev *ldev,
> > +		     unsigned long *delay_on,
> > +		     unsigned long *delay_off)
> > +{
> > +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> > +	struct qca8k_led_pattern_en reg_info;
> > +	struct qca8k_priv *priv = led->priv;
> > +
> > +	if (*delay_on == 0 && *delay_off == 0) {
> > +		*delay_on = 125;
> > +		*delay_off = 125;
> > +	}
> > +
> > +	if (*delay_on != 125 || *delay_off != 125) {
> > +		/* The hardware only supports blinking at 4Hz. Fall back
> > +		 * to software implementation in other cases.
> > +		 */
> > +		return -EINVAL;
> > +	}
> > +
> > +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> > +
> > +	regmap_update_bits(priv->regmap, reg_info.reg,
> > +			   GENMASK(1, 0) << reg_info.shift,
> > +			   QCA8K_LED_ALWAYS_BLINK_4HZ << reg_info.shift);
> > +
> > +	return 0;
> > +}
> > +
> > +static int
> > +qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable)
> > +{
> > +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> > +
> > +	struct qca8k_led_pattern_en reg_info;
> > +	struct qca8k_priv *priv = led->priv;
> > +	u32 val = QCA8K_LED_ALWAYS_OFF;
> > +
> > +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> > +
> > +	if (enable)
> > +		val = QCA8K_LED_RULE_CONTROLLED;
> > +
> > +	return regmap_update_bits(priv->regmap, reg_info.reg,
> > +				  GENMASK(1, 0) << reg_info.shift,
> > +				  val << reg_info.shift);
> 
> 88e151x doesn't have the ability to change in this way - we have
> a register with a 4-bit field which selects the LED mode from one
> of many, or forces the LED on/off/hi-z/blink.
> 
> Not specifically for this patch, but talking generally about this
> approach, the other issue I forsee with this is that yes, 88e151x has
> three LEDs, but the LED modes are also used to implement control
> signals (e.g., on a SFP, LOS can be implemented by programming mode
> 0 on LED2 (which makes it indicate link or not.) If we expose all the
> LEDs we run the risk of the LED subsystem trampling over that
> configuration and essentially messing up such modules. So the Marvell
> PHY driver would need to know when it is appropriate to expose these
> things to the LED subsystem.
> 
> I guess doing it dependent on firmware description as you do in
> this driver would work - if there's no firmware description, they're
> not exposed.
> 

The idea is to provide a way to tell the driver what should be done and
tell the trigger that something is not doable and to revert to sw mode.

keeping the thing as simple and direct as possible and leave the rest to
the driver by doing minimal validation on the trigger side.

Do you have suggestion on how this can be improved even more and be more
flexible? 

-- 
	Ansuel

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Rob Herring]

On Thu, Dec 15, 2022 at 12:54:38AM +0100, Christian Marangi wrote:
> Add LEDs definition example for qca8k using the offload trigger as the
> default trigger and add all the supported offload triggers by the
> switch.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> index 978162df51f7..4090cf65c41c 100644
> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> @@ -65,6 +65,8 @@ properties:
>                   internal mdio access is used.
>                   With the legacy mapping the reg corresponding to the internal
>                   mdio is the switch reg with an offset of -1.
> +                 Each phy have at least 3 LEDs connected and can be declared
> +                 using the standard LEDs structure.
>  
>  patternProperties:
>    "^(ethernet-)?ports$":
> @@ -202,6 +204,7 @@ examples:
>      };
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
>  
>      mdio {
>          #address-cells = <1>;
> @@ -284,6 +287,27 @@ examples:
>  
>                  internal_phy_port1: ethernet-phy@0 {
>                      reg = <0>;
> +
> +                    leds {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        led@0 {
> +                            reg = <0>;
> +                            color = <LED_COLOR_ID_WHITE>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            linux,default-trigger = "netdev";

'function' should replace this. Don't encourage more users. 

Also, 'netdev' is not documented which leaves me wondering why there's 
no warning? Either this patch didn't apply or there's a problem in the 
schema that's not checking this node.

> +                        };
> +
> +                        led@1 {
> +                            reg = <1>;
> +                            color = <LED_COLOR_ID_AMBER>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;

Typo? These are supposed to be unique. Can't you use 'reg' in your case?


> +                            linux,default-trigger = "netdev";
> +                        };
> +                    };
>                  };
>  
>                  internal_phy_port2: ethernet-phy@1 {
> -- 
> 2.37.2
> 
> 

Re: [PATCH v7 10/11] net: dsa: qca8k: add LEDs support

[Andrew Lunn]

> > +qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable)
> > +{
> > +	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
> > +
> > +	struct qca8k_led_pattern_en reg_info;
> > +	struct qca8k_priv *priv = led->priv;
> > +	u32 val = QCA8K_LED_ALWAYS_OFF;
> > +
> > +	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
> > +
> > +	if (enable)
> > +		val = QCA8K_LED_RULE_CONTROLLED;
> > +
> > +	return regmap_update_bits(priv->regmap, reg_info.reg,
> > +				  GENMASK(1, 0) << reg_info.shift,
> > +				  val << reg_info.shift);
> 
> 88e151x doesn't have the ability to change in this way - we have
> a register with a 4-bit field which selects the LED mode from one
> of many, or forces the LED on/off/hi-z/blink.
> 
> Not specifically for this patch, but talking generally about this
> approach, the other issue I forsee with this is that yes, 88e151x has
> three LEDs, but the LED modes are also used to implement control
> signals (e.g., on a SFP, LOS can be implemented by programming mode
> 0 on LED2 (which makes it indicate link or not.) If we expose all the
> LEDs we run the risk of the LED subsystem trampling over that
> configuration and essentially messing up such modules. So the Marvell
> PHY driver would need to know when it is appropriate to expose these
> things to the LED subsystem.
> 
> I guess doing it dependent on firmware description as you do in
> this driver would work - if there's no firmware description, they're
> not exposed.
> 

I expect there will always be some sort of firmware involved,
describing the hardware. Without that, we have no idea how many LEDs
are actually connected to pins of the PHY, for example.

I've not yet looked at this patchset in detail, but i hope the DT
binding code is reusable, so all PHYs will have the same basic
binding.

    Andrew

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Andrew Lunn]

On Tue, Dec 20, 2022 at 11:39:58AM -0600, Rob Herring wrote:
> On Thu, Dec 15, 2022 at 12:54:38AM +0100, Christian Marangi wrote:
> > Add LEDs definition example for qca8k using the offload trigger as the
> > default trigger and add all the supported offload triggers by the
> > switch.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> >  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > index 978162df51f7..4090cf65c41c 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > @@ -65,6 +65,8 @@ properties:
> >                   internal mdio access is used.
> >                   With the legacy mapping the reg corresponding to the internal
> >                   mdio is the switch reg with an offset of -1.
> > +                 Each phy have at least 3 LEDs connected and can be declared
> > +                 using the standard LEDs structure.
> >  
> >  patternProperties:
> >    "^(ethernet-)?ports$":
> > @@ -202,6 +204,7 @@ examples:
> >      };
> >    - |
> >      #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/leds/common.h>
> >  
> >      mdio {
> >          #address-cells = <1>;
> > @@ -284,6 +287,27 @@ examples:
> >  
> >                  internal_phy_port1: ethernet-phy@0 {
> >                      reg = <0>;
> > +
> > +                    leds {
> > +                        #address-cells = <1>;
> > +                        #size-cells = <0>;
> > +
> > +                        led@0 {
> > +                            reg = <0>;
> > +                            color = <LED_COLOR_ID_WHITE>;
> > +                            function = LED_FUNCTION_LAN;
> > +                            function-enumerator = <1>;
> > +                            linux,default-trigger = "netdev";
> 
> 'function' should replace this. Don't encourage more users. 
> 
> Also, 'netdev' is not documented which leaves me wondering why there's 
> no warning? Either this patch didn't apply or there's a problem in the 
> schema that's not checking this node.

It is probably the usual limitation that the tools require a
compatible, where as the kernel does not.

> > +                        };
> > +
> > +                        led@1 {
> > +                            reg = <1>;
> > +                            color = <LED_COLOR_ID_AMBER>;
> > +                            function = LED_FUNCTION_LAN;
> > +                            function-enumerator = <1>;
> 
> Typo? These are supposed to be unique. Can't you use 'reg' in your case?

reg in this context is the address of the PHY on the MDIO bus. This is
an Ethernet switch, so has many PHYs, each with its own address.

   Andrew

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Andrew Lunn]

On Thu, Dec 15, 2022 at 12:54:38AM +0100, Christian Marangi wrote:
> Add LEDs definition example for qca8k using the offload trigger as the
> default trigger and add all the supported offload triggers by the
> switch.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> index 978162df51f7..4090cf65c41c 100644
> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> @@ -65,6 +65,8 @@ properties:
>                   internal mdio access is used.
>                   With the legacy mapping the reg corresponding to the internal
>                   mdio is the switch reg with an offset of -1.
> +                 Each phy have at least 3 LEDs connected and can be declared
> +                 using the standard LEDs structure.
>  
>  patternProperties:
>    "^(ethernet-)?ports$":
> @@ -202,6 +204,7 @@ examples:
>      };
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
>  
>      mdio {
>          #address-cells = <1>;
> @@ -284,6 +287,27 @@ examples:
>  
>                  internal_phy_port1: ethernet-phy@0 {
>                      reg = <0>;
> +
> +                    leds {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        led@0 {
> +                            reg = <0>;
> +                            color = <LED_COLOR_ID_WHITE>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            linux,default-trigger = "netdev";
> +                        };
> +
> +                        led@1 {
> +                            reg = <1>;
> +                            color = <LED_COLOR_ID_AMBER>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            linux,default-trigger = "netdev";
> +                        };
> +                    };
>                  };

I don't see anything here which is specific to the QCA8K. I really
hope the same binding should work for any PHY which has LEDs. So
please move this into ethernet-phy.yaml.

       Andrew

Re: [PATCH v7 01/11] leds: add support for hardware driven LEDs

[Andrew Lunn]

On Fri, Dec 16, 2022 at 05:45:25PM +0100, Christian Marangi wrote:
> On Thu, Dec 15, 2022 at 04:13:03PM +0000, Russell King (Oracle) wrote:
> > Hi Christian,
> > 
> > Thanks for the patch.
> > 
> > I think Andrew's email is offline at the moment.
> >
> 
> Notice by gmail spamming me "I CAN'T SEND IT AHHHHH"
> Holidy times I guess?

That was part of the problem. Away travelling when foot gun hit foot,
and i didn't have access to the tools to fix it while away.

    Andrew

Re: [PATCH v7 04/11] leds: trigger: netdev: rename and expose NETDEV trigger enum modes

[Andrew Lunn]

On Thu, Dec 15, 2022 at 12:54:31AM +0100, Christian Marangi wrote:
> Rename NETDEV trigger enum modes to a more simbolic name and move them

simbolic -> symbolic. 

	 Andrew

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Andrew Lunn]

> > One thought on this approach though - if one has a PHY that supports
> > "activity" but not independent "rx" and "tx" activity indications
> > and it doesn't support software control, how would one enable activity
> > mode? There isn't a way to simultaneously enable both at the same
> > time... However, I need to check whether there are any PHYs that fall
> > into this category.
> >
> 
> Problem is that for such feature and to have at least something working
> we need to face compromise. We really can't support each switch feature
> and have a generic API for everything.

I agree we need to make compromises. We cannot support every LED
feature of every PHY, they are simply too diverse. Hopefully we can
support some features of every PHY. In the worst case, a PHY simply
cannot be controlled via this method, which is the current state
today. So it is not worse off.

       Andrew

Re: [PATCH v7 09/11] leds: trigger: netdev: add additional hardware only triggers

[Andrew Lunn]

On Thu, Dec 15, 2022 at 05:35:47PM +0000, Russell King (Oracle) wrote:
> On Thu, Dec 15, 2022 at 12:54:36AM +0100, Christian Marangi wrote:
> > Add additional hardware only triggers commonly supported by switch LEDs.
> > 
> > Additional modes:
> > link_10: LED on with link up AND speed 10mbps
> > link_100: LED on with link up AND speed 100mbps
> > link_1000: LED on with link up AND speed 1000mbps
> > half_duplex: LED on with link up AND half_duplex mode
> > full_duplex: LED on with link up AND full duplex mode
> 
> Looking at Marvell 88e151x, I don't think this is usable there.
> We have the option of supporting link_1000 on one of the LEDs,
> link_100 on another, and link_10 on the other. It's rather rare
> for all three leds to be wired though.

The 88e151x will need to enumerate what it actually supports from the
above list, per LED. I also think we can carefully expand the list
above, adding a few more modes. We just need to ensure what is added
is reasonably generic, modes we expect multiple PHY to support. What
we need to avoid is adding every single mode a PHY supports, but no
other PHY has.

> This is also a PHY where "activity" mode is supported (illuminated
> or blinking if any traffic is transmitted or received) but may not
> support individual directional traffic in hardware. However, it
> does support forcing the LED on or off, so software mode can handle
> those until the user selects a combination of modes that are
> supported in the hardware.
> 
> > Additional blink interval modes:
> > blink_2hz: LED blink on any even at 2Hz (250ms)
> > blink_4hz: LED blink on any even at 4Hz (125ms)
> > blink_8hz: LED blink on any even at 8Hz (62ms)
> 
> This seems too restrictive. For example, Marvell 88e151x supports
> none of these, but does support 42, 84, 170, 340, 670ms.

I would actually drop this whole idea of being able to configure the
blink period. It seems like it is going to cause problems. I expect
most PHYs actual share the period across multiple LEDs, which you
cannot easily model here.

So i would have the driver hard coded to pick a frequency at thats' it.

   Andrew

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Andrew Lunn]

> > > +                        };
> > > +
> > > +                        led@1 {
> > > +                            reg = <1>;
> > > +                            color = <LED_COLOR_ID_AMBER>;
> > > +                            function = LED_FUNCTION_LAN;
> > > +                            function-enumerator = <1>;
> > 
> > Typo? These are supposed to be unique. Can't you use 'reg' in your case?
> 
> reg in this context is the address of the PHY on the MDIO bus. This is
> an Ethernet switch, so has many PHYs, each with its own address.

Actually, i'm wrong about that. reg in this context is the LED number
of the PHY. Typically there are 2 or 3 LEDs per PHY.

There is no reason the properties need to be unique. Often the LEDs
have 8 or 16 functions, identical for each LED, but with different
reset defaults so they show different things.

   Andrew

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Russell King (Oracle)]

On Wed, Dec 21, 2022 at 12:59:55AM +0100, Andrew Lunn wrote:
> > > One thought on this approach though - if one has a PHY that supports
> > > "activity" but not independent "rx" and "tx" activity indications
> > > and it doesn't support software control, how would one enable activity
> > > mode? There isn't a way to simultaneously enable both at the same
> > > time... However, I need to check whether there are any PHYs that fall
> > > into this category.
> > >
> > 
> > Problem is that for such feature and to have at least something working
> > we need to face compromise. We really can't support each switch feature
> > and have a generic API for everything.
> 
> I agree we need to make compromises. We cannot support every LED
> feature of every PHY, they are simply too diverse. Hopefully we can
> support some features of every PHY. In the worst case, a PHY simply
> cannot be controlled via this method, which is the current state
> today. So it is not worse off.

... and that compromise is that it's not going to be possible to enable
activity mode on 88e151x with how the code stands and with the
independent nature of "rx" and "tx" activity control currently in the
netdev trigger... making this whole approach somewhat useless for
Marvell PHYs.

We really need to see a working implementation for this code for more
than just one PHY to prove that it is actually possible for it to
support other PHYs. If not, it isn't actually solving the problem,
and we're going to continue getting custom implementations to configure
the LED settings.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Christian Marangi]

On Wed, Dec 21, 2022 at 02:41:50AM +0100, Andrew Lunn wrote:
> > > > +                        };
> > > > +
> > > > +                        led@1 {
> > > > +                            reg = <1>;
> > > > +                            color = <LED_COLOR_ID_AMBER>;
> > > > +                            function = LED_FUNCTION_LAN;
> > > > +                            function-enumerator = <1>;
> > > 
> > > Typo? These are supposed to be unique. Can't you use 'reg' in your case?
> > 
> > reg in this context is the address of the PHY on the MDIO bus. This is
> > an Ethernet switch, so has many PHYs, each with its own address.
> 
> Actually, i'm wrong about that. reg in this context is the LED number
> of the PHY. Typically there are 2 or 3 LEDs per PHY.
> 
> There is no reason the properties need to be unique. Often the LEDs
> have 8 or 16 functions, identical for each LED, but with different
> reset defaults so they show different things.
> 

Are we taking about reg or function-enumerator?

For reg it's really specific to the driver... My idea was that since a
single phy can have multiple leds attached, reg will represent the led
number.

This is an example of the dt implemented on a real device.

		mdio {
			#address-cells = <1>;
			#size-cells = <0>;

			phy_port1: phy@0 {
				reg = <0>;

				leds {
					#address-cells = <1>;
					#size-cells = <0>;

					lan1_led@0 {
						reg = <0>;
						color = <LED_COLOR_ID_WHITE>;
						function = LED_FUNCTION_LAN;
						function-enumerator = <1>;
						linux,default-trigger = "netdev";
					};

					lan1_led@1 {
						reg = <1>;
						color = <LED_COLOR_ID_AMBER>;
						function = LED_FUNCTION_LAN;
						function-enumerator = <1>;
						linux,default-trigger = "netdev";
					};
				};
			};

			phy_port2: phy@1 {
				reg = <1>;

				leds {
					#address-cells = <1>;
					#size-cells = <0>;


					lan2_led@0 {
						reg = <0>;
						color = <LED_COLOR_ID_WHITE>;
						function = LED_FUNCTION_LAN;
						function-enumerator = <2>;
						linux,default-trigger = "netdev";
					};

					lan2_led@1 {
						reg = <1>;
						color = <LED_COLOR_ID_AMBER>;
						function = LED_FUNCTION_LAN;
						function-enumerator = <2>;
						linux,default-trigger = "netdev";
					};
				};
			};

			phy_port3: phy@2 {
				reg = <2>;

				leds {
					#address-cells = <1>;
					#size-cells = <0>;

					lan3_led@0 {
						reg = <0>;
						color = <LED_COLOR_ID_WHITE>;
						function = LED_FUNCTION_LAN;
						function-enumerator = <3>;
						linux,default-trigger = "netdev";
					};

					lan3_led@1 {
						reg = <1>;
						color = <LED_COLOR_ID_AMBER>;
						function = LED_FUNCTION_LAN;
						function-enumerator = <3>;
						linux,default-trigger = "netdev";
					};
				};
			};

In the following implementation. Each port have 2 leds attached (out of
3) one white and one amber. The driver parse the reg and calculate the
offset to set the correct option with the regs by also checking the phy
number.

An alternative way would be set the reg to be the global led number in
the switch and deatch the phy from the calculation.

Something like
port 0 led 0 = reg 0
port 0 led 1 = reg 1
port 1 led 0 = reg 2
port 1 led 1 = reg 3
...

Using the function-enumerator can be problematic since ideally someone
would declare a dedicated function for wan led.

I'm very open to discuss and improve/fix this!

-- 
	Ansuel

Re: [PATCH v7 09/11] leds: trigger: netdev: add additional hardware only triggers

[Christian Marangi]

On Wed, Dec 21, 2022 at 01:12:16AM +0100, Andrew Lunn wrote:
> On Thu, Dec 15, 2022 at 05:35:47PM +0000, Russell King (Oracle) wrote:
> > On Thu, Dec 15, 2022 at 12:54:36AM +0100, Christian Marangi wrote:
> > > Add additional hardware only triggers commonly supported by switch LEDs.
> > > 
> > > Additional modes:
> > > link_10: LED on with link up AND speed 10mbps
> > > link_100: LED on with link up AND speed 100mbps
> > > link_1000: LED on with link up AND speed 1000mbps
> > > half_duplex: LED on with link up AND half_duplex mode
> > > full_duplex: LED on with link up AND full duplex mode
> > 
> > Looking at Marvell 88e151x, I don't think this is usable there.
> > We have the option of supporting link_1000 on one of the LEDs,
> > link_100 on another, and link_10 on the other. It's rather rare
> > for all three leds to be wired though.
> 
> The 88e151x will need to enumerate what it actually supports from the
> above list, per LED. I also think we can carefully expand the list
> above, adding a few more modes. We just need to ensure what is added
> is reasonably generic, modes we expect multiple PHY to support. What
> we need to avoid is adding every single mode a PHY supports, but no
> other PHY has.
> 
> > This is also a PHY where "activity" mode is supported (illuminated
> > or blinking if any traffic is transmitted or received) but may not
> > support individual directional traffic in hardware. However, it
> > does support forcing the LED on or off, so software mode can handle
> > those until the user selects a combination of modes that are
> > supported in the hardware.
> > 
> > > Additional blink interval modes:
> > > blink_2hz: LED blink on any even at 2Hz (250ms)
> > > blink_4hz: LED blink on any even at 4Hz (125ms)
> > > blink_8hz: LED blink on any even at 8Hz (62ms)
> > 
> > This seems too restrictive. For example, Marvell 88e151x supports
> > none of these, but does support 42, 84, 170, 340, 670ms.
> 
> I would actually drop this whole idea of being able to configure the
> blink period. It seems like it is going to cause problems. I expect
> most PHYs actual share the period across multiple LEDs, which you
> cannot easily model here.
> 
> So i would have the driver hard coded to pick a frequency at thats' it.
> 

Yes I think "for now" it's the only way and just drop blink
configuration support.

-- 
	Ansuel

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Andrew Lunn]

> An alternative way would be set the reg to be the global led number in
> the switch and deatch the phy from the calculation.
> 
> Something like
> port 0 led 0 = reg 0
> port 0 led 1 = reg 1
> port 1 led 0 = reg 2
> port 1 led 1 = reg 3

I would not do this. It will make LED controllers embedded in switches
different to LEDs controllers embedded in PHYs. Ideally we want them
identical. One binding to rule them all.

	   Andrew

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Christian Marangi]

On Wed, Dec 21, 2022 at 09:54:43AM +0000, Russell King (Oracle) wrote:
> On Wed, Dec 21, 2022 at 12:59:55AM +0100, Andrew Lunn wrote:
> > > > One thought on this approach though - if one has a PHY that supports
> > > > "activity" but not independent "rx" and "tx" activity indications
> > > > and it doesn't support software control, how would one enable activity
> > > > mode? There isn't a way to simultaneously enable both at the same
> > > > time... However, I need to check whether there are any PHYs that fall
> > > > into this category.
> > > >
> > > 
> > > Problem is that for such feature and to have at least something working
> > > we need to face compromise. We really can't support each switch feature
> > > and have a generic API for everything.
> > 
> > I agree we need to make compromises. We cannot support every LED
> > feature of every PHY, they are simply too diverse. Hopefully we can
> > support some features of every PHY. In the worst case, a PHY simply
> > cannot be controlled via this method, which is the current state
> > today. So it is not worse off.
> 
> ... and that compromise is that it's not going to be possible to enable
> activity mode on 88e151x with how the code stands and with the
> independent nature of "rx" and "tx" activity control currently in the
> netdev trigger... making this whole approach somewhat useless for
> Marvell PHYs.

Again we can consider adding an activity mode. It seems logical that
some switch may only support global traffic instead of independend tx or
rx... The feature are not mutually exclusive. One include the other 2.

We already a simple workaround for the link mode where on the current
driver, if the link mode is enabled just all rule for 10 100 and 1000
mbps are enabled simulating a global link event.

> 
> We really need to see a working implementation for this code for more
> than just one PHY to prove that it is actually possible for it to
> support other PHYs. If not, it isn't actually solving the problem,
> and we're going to continue getting custom implementations to configure
> the LED settings.
> 

Agree that we need other user for this to catch some problem in the
implementation of this generic API.

-- 
	Ansuel

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Andrew Lunn]

> > > I agree we need to make compromises. We cannot support every LED
> > > feature of every PHY, they are simply too diverse. Hopefully we can
> > > support some features of every PHY. In the worst case, a PHY simply
> > > cannot be controlled via this method, which is the current state
> > > today. So it is not worse off.
> > 
> > ... and that compromise is that it's not going to be possible to enable
> > activity mode on 88e151x with how the code stands and with the
> > independent nature of "rx" and "tx" activity control currently in the
> > netdev trigger... making this whole approach somewhat useless for
> > Marvell PHYs.
> 
> Again we can consider adding an activity mode. It seems logical that
> some switch may only support global traffic instead of independend tx or
> rx... The feature are not mutually exclusive. One include the other 2.

Looking at the software trigger, adding NETDEV_LED_RXTX looks simple
to do. I also suspect it will be used by more than Marvell.

> > We really need to see a working implementation for this code for more
> > than just one PHY to prove that it is actually possible for it to
> > support other PHYs. If not, it isn't actually solving the problem,
> > and we're going to continue getting custom implementations to configure
> > the LED settings.
> > 
> 
> Agree that we need other user for this to catch some problem in the
> implementation of this generic API.

We need a PHY driver implementation. The phylib core needs to be
involved, the cled code needs to call generic phylib functions which
take the phydev->lock before calling into the PHY driver. Probably the
phylib core can do all the memory allocation, and registration of the
LED to the LED core. If it is not too ugly, i would also do the DT
binding parsing in the core, so we don't end up with subtle
differences.

	Andrew

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Rob Herring]

On Wed, Dec 21, 2022 at 6:55 AM Christian Marangi <ansuelsmth@gmail.com> wrote:
>
> On Wed, Dec 21, 2022 at 02:41:50AM +0100, Andrew Lunn wrote:
> > > > > +                        };
> > > > > +
> > > > > +                        led@1 {
> > > > > +                            reg = <1>;
> > > > > +                            color = <LED_COLOR_ID_AMBER>;
> > > > > +                            function = LED_FUNCTION_LAN;
> > > > > +                            function-enumerator = <1>;
> > > >
> > > > Typo? These are supposed to be unique. Can't you use 'reg' in your case?
> > >
> > > reg in this context is the address of the PHY on the MDIO bus. This is
> > > an Ethernet switch, so has many PHYs, each with its own address.
> >
> > Actually, i'm wrong about that. reg in this context is the LED number
> > of the PHY. Typically there are 2 or 3 LEDs per PHY.
> >
> > There is no reason the properties need to be unique. Often the LEDs
> > have 8 or 16 functions, identical for each LED, but with different
> > reset defaults so they show different things.
> >
>
> Are we taking about reg or function-enumerator?
>
> For reg it's really specific to the driver... My idea was that since a
> single phy can have multiple leds attached, reg will represent the led
> number.
>
> This is an example of the dt implemented on a real device.
>
>                 mdio {
>                         #address-cells = <1>;
>                         #size-cells = <0>;
>
>                         phy_port1: phy@0 {
>                                 reg = <0>;
>
>                                 leds {
>                                         #address-cells = <1>;
>                                         #size-cells = <0>;
>
>                                         lan1_led@0 {
>                                                 reg = <0>;
>                                                 color = <LED_COLOR_ID_WHITE>;
>                                                 function = LED_FUNCTION_LAN;
>                                                 function-enumerator = <1>;
>                                                 linux,default-trigger = "netdev";
>                                         };
>
>                                         lan1_led@1 {
>                                                 reg = <1>;
>                                                 color = <LED_COLOR_ID_AMBER>;
>                                                 function = LED_FUNCTION_LAN;
>                                                 function-enumerator = <1>;
>                                                 linux,default-trigger = "netdev";
>                                         };
>                                 };
>                         };
>
>                         phy_port2: phy@1 {
>                                 reg = <1>;
>
>                                 leds {
>                                         #address-cells = <1>;
>                                         #size-cells = <0>;
>
>
>                                         lan2_led@0 {
>                                                 reg = <0>;
>                                                 color = <LED_COLOR_ID_WHITE>;
>                                                 function = LED_FUNCTION_LAN;
>                                                 function-enumerator = <2>;
>                                                 linux,default-trigger = "netdev";
>                                         };
>
>                                         lan2_led@1 {
>                                                 reg = <1>;
>                                                 color = <LED_COLOR_ID_AMBER>;
>                                                 function = LED_FUNCTION_LAN;
>                                                 function-enumerator = <2>;
>                                                 linux,default-trigger = "netdev";
>                                         };
>                                 };
>                         };
>
>                         phy_port3: phy@2 {
>                                 reg = <2>;
>
>                                 leds {
>                                         #address-cells = <1>;
>                                         #size-cells = <0>;
>
>                                         lan3_led@0 {
>                                                 reg = <0>;
>                                                 color = <LED_COLOR_ID_WHITE>;
>                                                 function = LED_FUNCTION_LAN;
>                                                 function-enumerator = <3>;
>                                                 linux,default-trigger = "netdev";
>                                         };
>
>                                         lan3_led@1 {
>                                                 reg = <1>;
>                                                 color = <LED_COLOR_ID_AMBER>;
>                                                 function = LED_FUNCTION_LAN;
>                                                 function-enumerator = <3>;
>                                                 linux,default-trigger = "netdev";
>                                         };
>                                 };
>                         };
>
> In the following implementation. Each port have 2 leds attached (out of
> 3) one white and one amber. The driver parse the reg and calculate the
> offset to set the correct option with the regs by also checking the phy
> number.

Okay, the full example makes more sense. But I still thought
'function-enumerator' values should be globally unique within a value
of 'function'. Maybe Jacek has an opinion on this?

You are using it to distinguish phys/ports, but there's already enough
information in the DT to do that. You have the parent nodes and I
assume you have port numbers under 'ethernet-ports'. For each port,
get the phy node and then get the LEDs.

> An alternative way would be set the reg to be the global led number in
> the switch and deatch the phy from the calculation.
>
> Something like
> port 0 led 0 = reg 0
> port 0 led 1 = reg 1
> port 1 led 0 = reg 2
> port 1 led 1 = reg 3
> ...

No.

Rob

Re: [PATCH v7 06/11] leds: trigger: netdev: add hardware control support

[Alexander Stein]

Am Freitag, 16. Dezember 2022, 18:00:45 CET schrieb Christian Marangi:
> On Thu, Dec 15, 2022 at 04:27:17PM +0100, Alexander Stein wrote:
> > Hi,
> > 
> > thanks for the v7 series.
> > 
> > Am Donnerstag, 15. Dezember 2022, 00:54:33 CET schrieb Christian Marangi:
> > > Add hardware control support for the Netdev trigger.
> > > The trigger on config change will check if the requested trigger can set
> > > to blink mode using LED hardware mode and if every blink mode is
> > > supported,
> > > the trigger will enable hardware mode with the requested configuration.
> > > If there is at least one trigger that is not supported and can't run in
> > > hardware mode, then software mode will be used instead.
> > > A validation is done on every value change and on fail the old value is
> > > restored and -EINVAL is returned.
> > > 
> > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > > ---
> > > 
> > >  drivers/leds/trigger/ledtrig-netdev.c | 155 +++++++++++++++++++++++++-
> > >  1 file changed, 149 insertions(+), 6 deletions(-)
> > > 
> > > diff --git a/drivers/leds/trigger/ledtrig-netdev.c
> > > b/drivers/leds/trigger/ledtrig-netdev.c index dd63cadb896e..ed019cb5867c
> > > 100644
> > > --- a/drivers/leds/trigger/ledtrig-netdev.c
> > > +++ b/drivers/leds/trigger/ledtrig-netdev.c
> > > @@ -37,6 +37,7 @@
> > > 
> > >   */
> > >  
> > >  struct led_netdev_data {
> > > 
> > > +	enum led_blink_modes blink_mode;
> > > 
> > >  	spinlock_t lock;
> > >  	
> > >  	struct delayed_work work;
> > > 
> > > @@ -53,11 +54,105 @@ struct led_netdev_data {
> > > 
> > >  	bool carrier_link_up;
> > >  
> > >  };
> > > 
> > > +struct netdev_led_attr_detail {
> > > +	char *name;
> > > +	bool hardware_only;
> > > +	enum led_trigger_netdev_modes bit;
> > > +};
> > > +
> > > +static struct netdev_led_attr_detail attr_details[] = {
> > > +	{ .name = "link", .bit = TRIGGER_NETDEV_LINK},
> > > +	{ .name = "tx", .bit = TRIGGER_NETDEV_TX},
> > > +	{ .name = "rx", .bit = TRIGGER_NETDEV_RX},
> > > +};
> > > +
> > > +static bool validate_baseline_state(struct led_netdev_data
> > > *trigger_data)
> > > +{
> > > +	struct led_classdev *led_cdev = trigger_data->led_cdev;
> > > +	struct netdev_led_attr_detail *detail;
> > > +	u32 hw_blink_mode_supported = 0;
> > > +	bool force_sw = false;
> > > +	int i;
> > > +
> > > +	for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> > > +		detail = &attr_details[i];
> > > +
> > > +		/* Mode not active, skip */
> > > +		if (!test_bit(detail->bit, &trigger_data->mode))
> > > +			continue;
> > > +
> > > +		/* Hardware only mode enabled on software controlled led
> > 
> > */
> > 
> > > +		if (led_cdev->blink_mode == SOFTWARE_CONTROLLED &&
> > > +		    detail->hardware_only)
> > > +			return false;
> > > +
> > > +		/* Check if the mode supports hardware mode */
> > > +		if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
> > > +			/* With a net dev set, force software mode.
> > > +			 * With modes are handled by hardware, led will
> > 
> > blink
> > 
> > > +			 * based on his own events and will ignore any
> > 
> > event
> > 
> > > +			 * from the provided dev.
> > > +			 */
> > > +			if (trigger_data->net_dev) {
> > > +				force_sw = true;
> > > +				continue;
> > > +			}
> > > +
> > > +			/* With empty dev, check if the mode is
> > 
> > supported */
> > 
> > > +			if
> > 
> > (led_trigger_blink_mode_is_supported(led_cdev, detail->bit))
> > 
> > > +				hw_blink_mode_supported |= BIT(detail-
> > >
> > >bit);
> > 
> > Shouldn't this be BIT(detail->bit)?
> 
> I think I didn't understand?

The name 'bit' indicates this is a single bit number rather than a bitmask. 
AFAICS the value (detail->bit) passed to led_trigger_blink_mode_is_supported 
is eventually used within test_bit inside dp83867_parse_netdev. I assume you 
have to actually pass the bitmask with this single bit set, not the bit number 
itself.

Best regards,
Alexander

> > > +		}
> > > +	}
> > > +
> > > +	/* We can't run modes handled by both software and hardware.
> > > +	 * Check if we run hardware modes and check if all the modes
> > > +	 * can be handled by hardware.
> > > +	 */
> > > +	if (hw_blink_mode_supported && hw_blink_mode_supported !=
> > > trigger_data->mode) +		return false;
> > > +
> > > +	/* Modes are valid. Decide now the running mode to later
> > > +	 * set the baseline.
> > > +	 * Software mode is enforced with net_dev set. With an empty
> > > +	 * one hardware mode is selected by default (if supported).
> > > +	 */
> > > +	if (force_sw || led_cdev->blink_mode == SOFTWARE_CONTROLLED)
> > 
> > IMHO '|| !hw_blink_mode_supported' should be added here for blink_modes.
> > This might happen if a PHY LED is SOFTWARE_HARDWARE_CONTROLLED, but some
> > blink mode is not supported by hardware, thus hw_blink_mode_supported=0.
> 
> Will check this and report back.
> 
> > Best regards,
> > Alexander
> > 
> > > +		trigger_data->blink_mode = SOFTWARE_CONTROLLED;
> > > +	else
> > > +		trigger_data->blink_mode = HARDWARE_CONTROLLED;
> > > +
> > > +	return true;
> > > +}
> > > +
> > > 
> > >  static void set_baseline_state(struct led_netdev_data *trigger_data)
> > >  {
> > > 
> > > +	int i;
> > > 
> > >  	int current_brightness;
> > > 
> > > +	struct netdev_led_attr_detail *detail;
> > > 
> > >  	struct led_classdev *led_cdev = trigger_data->led_cdev;
> > > 
> > > +	/* Modes already validated. Directly apply hw trigger modes */
> > > +	if (trigger_data->blink_mode == HARDWARE_CONTROLLED) {
> > > +		/* We are refreshing the blink modes. Reset them */
> > > +		led_cdev->hw_control_configure(led_cdev,
> > 
> > BIT(TRIGGER_NETDEV_LINK),
> > 
> > > +					       BLINK_MODE_ZERO);
> > > +
> > > +		for (i = 0; i < ARRAY_SIZE(attr_details); i++) {
> > > +			detail = &attr_details[i];
> > > +
> > > +			if (!test_bit(detail->bit, &trigger_data->mode))
> > > +				continue;
> > > +
> > > +			led_cdev->hw_control_configure(led_cdev,
> > 
> > BIT(detail->bit),
> > 
> > > +
> > 
> > BLINK_MODE_ENABLE);
> > 
> > Shouldn't this be BIT(detail->bit)?
> > 
> > > +		}
> > > +
> > > +		led_cdev->hw_control_start(led_cdev);
> > > +
> > > +		return;
> > > +	}
> > > +
> > > +	/* Handle trigger modes by software */
> > > 
> > >  	current_brightness = led_cdev->brightness;
> > >  	if (current_brightness)
> > >  	
> > >  		led_cdev->blink_brightness = current_brightness;
> > > 
> > > @@ -100,10 +195,15 @@ static ssize_t device_name_store(struct device
> > > *dev,
> > > 
> > >  				 size_t size)
> > >  
> > >  {
> > >  
> > >  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> > > 
> > > +	struct net_device *old_net = trigger_data->net_dev;
> > > +	char old_device_name[IFNAMSIZ];
> > > 
> > >  	if (size >= IFNAMSIZ)
> > >  	
> > >  		return -EINVAL;
> > > 
> > > +	/* Backup old device name */
> > > +	memcpy(old_device_name, trigger_data->device_name, IFNAMSIZ);
> > > +
> > > 
> > >  	cancel_delayed_work_sync(&trigger_data->work);
> > >  	
> > >  	spin_lock_bh(&trigger_data->lock);
> > > 
> > > @@ -122,6 +222,19 @@ static ssize_t device_name_store(struct device
> > > *dev,
> > > 
> > >  		trigger_data->net_dev =
> > >  		
> > >  		    dev_get_by_name(&init_net, trigger_data->device_name);
> > > 
> > > +	if (!validate_baseline_state(trigger_data)) {
> > > +		/* Restore old net_dev and device_name */
> > > +		if (trigger_data->net_dev)
> > > +			dev_put(trigger_data->net_dev);
> > > +
> > > +		dev_hold(old_net);
> > > +		trigger_data->net_dev = old_net;
> > > +		memcpy(trigger_data->device_name, old_device_name,
> > 
> > IFNAMSIZ);
> > 
> > > +
> > > +		spin_unlock_bh(&trigger_data->lock);
> > > +		return -EINVAL;
> > > +	}
> > > +
> > > 
> > >  	trigger_data->carrier_link_up = false;
> > >  	if (trigger_data->net_dev != NULL)
> > >  	
> > >  		trigger_data->carrier_link_up =
> > 
> > netif_carrier_ok(trigger_data->net_dev);
> > 
> > > @@ -159,7 +272,7 @@ static ssize_t netdev_led_attr_store(struct device
> > > *dev, const char *buf, size_t size, enum led_trigger_netdev_modes attr)
> > > 
> > >  {
> > >  
> > >  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> > > 
> > > -	unsigned long state;
> > > +	unsigned long state, old_mode = trigger_data->mode;
> > > 
> > >  	int ret;
> > >  	int bit;
> > > 
> > > @@ -184,6 +297,12 @@ static ssize_t netdev_led_attr_store(struct device
> > > *dev, const char *buf, else
> > > 
> > >  		clear_bit(bit, &trigger_data->mode);
> > > 
> > > +	if (!validate_baseline_state(trigger_data)) {
> > > +		/* Restore old mode on validation fail */
> > > +		trigger_data->mode = old_mode;
> > > +		return -EINVAL;
> > > +	}
> > > +
> > > 
> > >  	set_baseline_state(trigger_data);
> > >  	
> > >  	return size;
> > > 
> > > @@ -220,6 +339,8 @@ static ssize_t interval_store(struct device *dev,
> > > 
> > >  			      size_t size)
> > >  
> > >  {
> > >  
> > >  	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
> > > 
> > > +	int old_interval = atomic_read(&trigger_data->interval);
> > > +	u32 old_mode = trigger_data->mode;
> > > 
> > >  	unsigned long value;
> > >  	int ret;
> > > 
> > > @@ -228,13 +349,22 @@ static ssize_t interval_store(struct device *dev,
> > > 
> > >  		return ret;
> > >  	
> > >  	/* impose some basic bounds on the timer interval */
> > > 
> > > -	if (value >= 5 && value <= 10000) {
> > > -		cancel_delayed_work_sync(&trigger_data->work);
> > > +	if (value < 5 || value > 10000)
> > > +		return -EINVAL;
> > > +
> > > +	cancel_delayed_work_sync(&trigger_data->work);
> > > +
> > > +	atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
> > > 
> > > -		atomic_set(&trigger_data->interval,
> > 
> > msecs_to_jiffies(value));
> > 
> > > -		set_baseline_state(trigger_data);	/* resets timer
> > 
> > */
> > 
> > > +	if (!validate_baseline_state(trigger_data)) {
> > > +		/* Restore old interval on validation error */
> > > +		atomic_set(&trigger_data->interval, old_interval);
> > > +		trigger_data->mode = old_mode;
> > > +		return -EINVAL;
> > > 
> > >  	}
> > > 
> > > +	set_baseline_state(trigger_data);	/* resets timer */
> > > +
> > > 
> > >  	return size;
> > >  
> > >  }
> > > 
> > > @@ -368,13 +498,25 @@ static int netdev_trig_activate(struct
> > > led_classdev
> > > *led_cdev) trigger_data->mode = 0;
> > > 
> > >  	atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
> > >  	trigger_data->last_activity = 0;
> > > 
> > > +	if (led_cdev->blink_mode != SOFTWARE_CONTROLLED) {
> > > +		/* With hw mode enabled reset any rule set by default */
> > > +		if (led_cdev->hw_control_status(led_cdev)) {
> > > +			rc = led_cdev->hw_control_configure(led_cdev,
> > 
> > BIT(TRIGGER_NETDEV_LINK),
> > 
> > > +
> > 
> > BLINK_MODE_ZERO);
> > 
> > > +			if (rc)
> > > +				goto err;
> > > +		}
> > > +	}
> > > 
> > >  	led_set_trigger_data(led_cdev, trigger_data);
> > >  	
> > >  	rc = register_netdevice_notifier(&trigger_data->notifier);
> > >  	if (rc)
> > > 
> > > -		kfree(trigger_data);
> > > +		goto err;
> > > 
> > > +	return 0;
> > > +err:
> > > +	kfree(trigger_data);
> > > 
> > >  	return rc;
> > >  
> > >  }
> > > 
> > > @@ -394,6 +536,7 @@ static void netdev_trig_deactivate(struct
> > > led_classdev
> > > *led_cdev)
> > > 
> > >  static struct led_trigger netdev_led_trigger = {
> > >  
> > >  	.name = "netdev",
> > > 
> > > +	.supported_blink_modes = SOFTWARE_HARDWARE,
> > > 
> > >  	.activate = netdev_trig_activate,
> > >  	.deactivate = netdev_trig_deactivate,
> > >  	.groups = netdev_trig_groups,

Re: [PATCH v7 01/11] leds: add support for hardware driven LEDs

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 2693 bytes --]

On Thu, Dec 15, 2022 at 12:54:28AM +0100, Christian Marangi wrote:
> The LED must implement 3 main API:
> - hw_control_status(): This asks the LED driver if hardware mode is
>     enabled or not.
>     Triggers will check if the offload mode is supported and will be
>     activated accordingly. If the trigger can't run in software mode,
>     return -EOPNOTSUPP as the blinking can't be simulated by software.
> - hw_control_start(): This will simply enable the hardware mode for
>     the LED.
>     With this not declared and hw_control_status() returning true,
>     it's assumed that the LED is always in hardware mode.
> - hw_control_stop(): This will simply disable the hardware mode for
>     the LED.
>     With this not declared and hw_control_status() returning true,
>     it's assumed that the LED is always in hardware mode.
>     It's advised to the driver to put the LED in the old state but this
>     is not enforcerd and putting the LED off is also accepted.
> 

Building htmldocs with Sphinx, I got:

Documentation/leds/leds-class.rst:190: WARNING: Unexpected indentation.
Documentation/leds/leds-class.rst:192: WARNING: Block quote ends without a blank line; unexpected unindent.

I have applied the fixup on the API bullet list above:

---- >8 ----

diff --git a/Documentation/leds/leds-class.rst b/Documentation/leds/leds-class.rst
index efd2f68c46a7f9..fc16b503747800 100644
--- a/Documentation/leds/leds-class.rst
+++ b/Documentation/leds/leds-class.rst
@@ -186,13 +186,15 @@ supported. By default if a LED driver doesn't declare blink_mode, SOFTWARE_CONTR
 is assumed.
 
 The LED must implement 3 main API:
+
 - hw_control_status(): This asks the LED driver if hardware mode is enabled
-    or not. Triggers will check if the hardware mode is active and will try
-    to offload their triggers if supported by the driver.
+  or not. Triggers will check if the hardware mode is active and will try
+  to offload their triggers if supported by the driver.
 - hw_control_start(): This will simply enable the hardware mode for the LED.
+
 - hw_control_stop(): This will simply disable the hardware mode for the LED.
-    It's advised to the driver to put the LED in the old state but this is not
-    enforcerd and putting the LED off is also accepted.
+  It's advised to the driver to put the LED in the old state but this is not
+  enforcerd and putting the LED off is also accepted.
 
 With HARDWARE_CONTROLLED blink_mode hw_control_status/start/stop is optional
 and any software only trigger will reject activation as the LED supports only

Thanks.

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Sander Vanheule]

Hi Christian,

On Wed, 2022-12-21 at 13:54 +0100, Christian Marangi wrote:
> For reg it's really specific to the driver... My idea was that since a
> single phy can have multiple leds attached, reg will represent the led
> number.
> 
> This is an example of the dt implemented on a real device.
> 
>                 mdio {
>                         #address-cells = <1>;
>                         #size-cells = <0>;
> 
>                         phy_port1: phy@0 {
>                                 reg = <0>;
> 
>                                 leds {
>                                         #address-cells = <1>;
>                                         #size-cells = <0>;
[...]
>                                 };
>                         };
[...]
>                 };
> 
> In the following implementation. Each port have 2 leds attached (out of
> 3) one white and one amber. The driver parse the reg and calculate the
> offset to set the correct option with the regs by also checking the phy
> number.

With switch silicon allowing user control of the LEDs, vendors can (and will)
use the switch's LED peripheral to drive other LEDs (or worse). E.g. on a Cisco
SG220-26 switch, using a Realtek RTL8382 SoC, the LEDs associated with some
unused switch ports are used to display a global device status. My concern here
is that one would have to specify switch ports, that aren't connected to
anything, just to describe those non-ethernet LEDs.

Would an alternative with a 'trigger-sources' property pointing to the right phy
be an option? The trade-off I see would be that extra port info has to be
provided on a separate LED controller, which your example can avoid thanks to
the phy's reg property.

Building on your example this may become:

       switch {
           mdio {
                #address-cells = <1>;
                #size-cells = <0>;
                
                switch_phy0: phy@0 {
                    reg = <0>;
                    #trigger-source-cells = <1>;
                };
            };

            leds {
                #address-cells = <2>;
                #size-cells = <0>;

                /* First port, first LED */
                /* Port status, can be offloaded */
                led@0.0 {
                    reg = <0 0>;
                    trigger-sources = <&switch_phy0 (NET_LINK | NET_SPEED_1000)>;
                    function = color = <LED_COLOR_ID_WHITE>;
                    function = LED_FUNCTION_LAN;
                    function-enumerator = <1>;
                    linux,default-trigger = "netdev";
                };

                /* First port, first LED */
                /* Port status, can be offloaded */
                led@0.1 {
                    reg = <0 1>;
                    trigger-sources = <&switch_phy0 (NET_LINK | NET_SPEED_100 | NET_SPEED_10)>;
                    function = color = <LED_COLOR_ID_AMBER>;
                    function = LED_FUNCTION_LAN;
                    function-enumerator = <1>;
                    linux,default-trigger = "netdev";
                };

                /* Last port (not used in hardware), first LED */
                /* Device status, software controlled */
                led@7.0 {
                    reg = <7 0>;
                    function = color = <LED_COLOR_ID_AMBER>;
                    function = LED_FUNCTION_STATUS;
                    linux,default-trigger = "default-on";
                };
            };
        };


To be a bit less verbose, the &switch_mdio node might serve as trigger provider
with a single cell, but the above would allow only defined phy-s to be
referenced.

The trigger-source cells could be used for a more fine grained control of what
should be offloaded (link up/down, Rx/Tx activity, link speed, ...). Although
this selectivity is most likely runtime configurable, this could serve as a
description of static device labeling (e.g. "LINK/ACT 1000").

Switching to the implementation and driver side, the 'trigger-sources' property
could be used by the netdev trigger to determine if a status LED can be
offloaded. The netdev trigger could just hide the whole hardware/software
control aspect then. Much like how the timer trigger always offloads if an
implementation is provided, even when offloading is less flexible than the
software implementation of the timer trigger.


Best,
Sander

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Andrew Lunn]

> > This is an example of the dt implemented on a real device.
> > 
> >                 mdio {
> >                         #address-cells = <1>;
> >                         #size-cells = <0>;
> > 
> >                         phy_port1: phy@0 {
> >                                 reg = <0>;
> > 
> >                                 leds {
> >                                         #address-cells = <1>;
> >                                         #size-cells = <0>;
> [...]
> >                                 };
> >                         };
> [...]
> >                 };
> > 
> > In the following implementation. Each port have 2 leds attached (out of
> > 3) one white and one amber. The driver parse the reg and calculate the
> > offset to set the correct option with the regs by also checking the phy
> > number.
> 
> With switch silicon allowing user control of the LEDs, vendors can (and will)
> use the switch's LED peripheral to drive other LEDs (or worse). E.g. on a Cisco
> SG220-26 switch, using a Realtek RTL8382 SoC, the LEDs associated with some
> unused switch ports are used to display a global device status. My concern here
> is that one would have to specify switch ports, that aren't connected to
> anything, just to describe those non-ethernet LEDs.

Note that the binding is adding properties to the PHY nodes, not the
switch port nodes. Is this how the RTL8382 works? Marvell Switches
have LED registers which are not in the PHY register space.

But the point is, the PHYs will probe if listed. They don't have to
have a MAC pointing to them with a phandle. So the phydev will exist,
and that should be enough to get the LED class device registered. If
there is basic on/off support, that should be enough for you to attach
the Morse code panic trigger, the heartbeat handler, or any other LED
trigger.

	Andrew

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Sander Vanheule]

Hi Andrew,

On Sun, 2023-01-29 at 23:02 +0100, Andrew Lunn wrote:
> > > This is an example of the dt implemented on a real device.
> > > 
> > >                 mdio {
> > >                         #address-cells = <1>;
> > >                         #size-cells = <0>;
> > > 
> > >                         phy_port1: phy@0 {
> > >                                 reg = <0>;
> > > 
> > >                                 leds {
> > >                                         #address-cells = <1>;
> > >                                         #size-cells = <0>;
> > [...]
> > >                                 };
> > >                         };
> > [...]
> > >                 };
> > > 
> > > In the following implementation. Each port have 2 leds attached (out of
> > > 3) one white and one amber. The driver parse the reg and calculate the
> > > offset to set the correct option with the regs by also checking the phy
> > > number.
> > 
> > With switch silicon allowing user control of the LEDs, vendors can (and
> > will)
> > use the switch's LED peripheral to drive other LEDs (or worse). E.g. on a
> > Cisco
> > SG220-26 switch, using a Realtek RTL8382 SoC, the LEDs associated with some
> > unused switch ports are used to display a global device status. My concern
> > here
> > is that one would have to specify switch ports, that aren't connected to
> > anything, just to describe those non-ethernet LEDs.
> 
> Note that the binding is adding properties to the PHY nodes, not the
> switch port nodes. Is this how the RTL8382 works? Marvell Switches
> have LED registers which are not in the PHY register space.

Thanks for the quick clarification. Because you mention this, I realised that
the RTL8382's LED controller is actually not in the PHYs. These SoCs use
external PHYs, which may have their own, independent, LED controllers. For
example the RTL8212D [1].

[1]
https://datasheet.lcsc.com/lcsc/2203252253_Realtek-Semicon-RTL8218D-CG_C2901898.pdf

> 
> But the point is, the PHYs will probe if listed. They don't have to
> have a MAC pointing to them with a phandle. So the phydev will exist,
> and that should be enough to get the LED class device registered. If
> there is basic on/off support, that should be enough for you to attach
> the Morse code panic trigger, the heartbeat handler, or any other LED
> trigger.

OK, this makes sense for (external) PHYs which need to be probed anyway to have
access to the LEDs.

Looking at the RTL8212D's datasheet (Table 11, p. 24), it appears to be possible
to assign an LED to any of the eight PHYs. Perhaps to allow more freedom in the
board layout. Maybe I'm just not seeing it, but I don't think the example with
an 'leds' node under a PHY contains enough information to perform such a non-
trivial mapping. On the other hand, I'm not sure where else that info might go.
Maybe a 'trigger-sources' property cross-referencing another PHY in the same
package?

Best,
Sander

Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Andrew Lunn]

> Thanks for the quick clarification. Because you mention this, I realised that
> the RTL8382's LED controller is actually not in the PHYs. These SoCs use
> external PHYs, which may have their own, independent, LED controllers. For
> example the RTL8212D [1].
> 
> [1]
> https://datasheet.lcsc.com/lcsc/2203252253_Realtek-Semicon-RTL8218D-CG_C2901898.pdf
> 
> > 
> > But the point is, the PHYs will probe if listed. They don't have to
> > have a MAC pointing to them with a phandle. So the phydev will exist,
> > and that should be enough to get the LED class device registered. If
> > there is basic on/off support, that should be enough for you to attach
> > the Morse code panic trigger, the heartbeat handler, or any other LED
> > trigger.
> 
> OK, this makes sense for (external) PHYs which need to be probed anyway to have
> access to the LEDs.
> 
> Looking at the RTL8212D's datasheet (Table 11, p. 24), it appears to be possible
> to assign an LED to any of the eight PHYs. Perhaps to allow more freedom in the
> board layout. Maybe I'm just not seeing it, but I don't think the example with
> an 'leds' node under a PHY contains enough information to perform such a non-
> trivial mapping. On the other hand, I'm not sure where else that info might go.

The binding is defining all the generic properties need for generic
PHY LED. For most PHYs, it is probably sufficient. However, there is
nothing stopping you from adding PHY specific properties. So for
example, for each PHY LED you could have a property which maps it to
a LED00-LED35.

So propose a binding for the RTL8218D with whatever extra properties
you think are needed, and it will be reviewed in the normal way.

    Andrew