[PATCH] usb: dwc2: Make sure we disconnect the gadget state

[PATCH] usb: dwc2: Make sure we disconnect the gadget state

[John Stultz]

I had seen some odd behavior with HiKey's usb-gadget interface
that I finally seemed to have chased down. Basically every other
time I pluged in the OTG port, the gadget interface would
properly initialize. The other times, I'd get a big WARN_ON
in dwc2_hsotg_init_fifo() about the fifo_map not being clear.

Ends up if we don't disconnect the gadget state, the fifo-map
doesn't get cleared properly, which causes WARN_ON messages and
also results in the device not properly being setup as a gadget
every other time the OTG port is connected.

So this patch adds a call to dwc2_hsotg_disconnect() in the
reset path so the state is properly cleared.

With it, the gadget interface initializes properly on every
plug in.

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 drivers/usb/dwc2/hcd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index a73722e..91ed5b6 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3264,6 +3264,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
 		dwc2_core_init(hsotg, false);
 		dwc2_enable_global_interrupts(hsotg);
 		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		dwc2_hsotg_core_connect(hsotg);
-- 
2.7.4

Re: [PATCH] usb: dwc2: Make sure we disconnect the gadget state

[Sergei Shtylyov]

Hello!

On 3/3/2017 2:36 AM, John Stultz wrote:

> I had seen some odd behavior with HiKey's usb-gadget interface
> that I finally seemed to have chased down. Basically every other
> time I pluged in the OTG port, the gadget interface would

    Plugged. Perhaps could be fixed while applying...

> properly initialize. The other times, I'd get a big WARN_ON
> in dwc2_hsotg_init_fifo() about the fifo_map not being clear.
>
> Ends up if we don't disconnect the gadget state, the fifo-map
> doesn't get cleared properly, which causes WARN_ON messages and
> also results in the device not properly being setup as a gadget
> every other time the OTG port is connected.
>
> So this patch adds a call to dwc2_hsotg_disconnect() in the
> reset path so the state is properly cleared.
>
> With it, the gadget interface initializes properly on every
> plug in.
>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Guodong Xu <guodong.xu@linaro.org>
> Cc: Amit Pundir <amit.pundir@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: John Youn <johnyoun@synopsys.com>
> Cc: Douglas Anderson <dianders@chromium.org>
> Cc: Chen Yu <chenyu56@huawei.com>
> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Acked-by: John Youn <johnyoun@synopsys.com>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
[...]

MBR, Sergei