* [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers
@ 2022-05-03 11:32 Taniya Das
2022-05-03 18:58 ` Matthias Kaehlcke
2022-05-03 19:10 ` Stephen Boyd
0 siblings, 2 replies; 6+ messages in thread
From: Taniya Das @ 2022-05-03 11:32 UTC (permalink / raw)
To: Rob Herring, Bjorn Andersson
Cc: Douglas Anderson, Stephen Boyd, devicetree, linux-arm-msm,
linux-kernel, Taniya Das
Add the low pass audio clock controller device nodes. Keep the lpasscc
clock node disabled and enabled for lpass pil based devices.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
---
[v4]
* Mark lpasscc[lpasscc@3000000] device node as "disabled".
[v3]
* Fix unwanted extra spaces in reg property.
* Fix lpass_aon node clock phandle <&lpasscc> to <&lpasscore>
arch/arm64/boot/dts/qcom/sc7280.dtsi | 44 ++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index f0b64be63c21..477a754741a1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sc7280.h>
#include <dt-bindings/gpio/gpio.h>
@@ -1978,6 +1980,48 @@
clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
clock-names = "iface";
#clock-cells = <1>;
+ status = "disabled";
+ };
+
+ lpass_audiocc: clock-controller@3300000 {
+ compatible = "qcom,sc7280-lpassaudiocc";
+ reg = <0 0x03300000 0 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+ clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+ power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ lpass_aon: clock-controller@3380000 {
+ compatible = "qcom,sc7280-lpassaoncc";
+ reg = <0 0x03380000 0 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ lpasscore: clock-controller@3900000 {
+ compatible = "qcom,sc7280-lpasscorecc";
+ reg = <0 0x03900000 0 0x50000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ lpass_hm: clock-controller@3c00000 {
+ compatible = "qcom,sc7280-lpasshm";
+ reg = <0 0x3c00000 0 0x28>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
};
lpass_ag_noc: interconnect@3c40000 {
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers
2022-05-03 11:32 [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers Taniya Das
@ 2022-05-03 18:58 ` Matthias Kaehlcke
2022-05-04 5:40 ` Taniya Das
2022-05-03 19:10 ` Stephen Boyd
1 sibling, 1 reply; 6+ messages in thread
From: Matthias Kaehlcke @ 2022-05-03 18:58 UTC (permalink / raw)
To: Taniya Das
Cc: Rob Herring, Bjorn Andersson, Douglas Anderson, Stephen Boyd,
devicetree, linux-arm-msm, linux-kernel
On Tue, May 03, 2022 at 05:02:46PM +0530, Taniya Das wrote:
> Add the low pass audio clock controller device nodes. Keep the lpasscc
> clock node disabled and enabled for lpass pil based devices.
>
> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
> ---
> [v4]
> * Mark lpasscc[lpasscc@3000000] device node as "disabled".
>
> [v3]
> * Fix unwanted extra spaces in reg property.
> * Fix lpass_aon node clock phandle <&lpasscc> to <&lpasscore>
>
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 44 ++++++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index f0b64be63c21..477a754741a1 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -8,6 +8,8 @@
> #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
> #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
> +#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
> +#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/clock/qcom,videocc-sc7280.h>
> #include <dt-bindings/gpio/gpio.h>
> @@ -1978,6 +1980,48 @@
> clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
> clock-names = "iface";
> #clock-cells = <1>;
> + status = "disabled";
> + };
> +
> + lpass_audiocc: clock-controller@3300000 {
> + compatible = "qcom,sc7280-lpassaudiocc";
> + reg = <0 0x03300000 0 0x30000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
> + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
> + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
> + #clock-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + lpass_aon: clock-controller@3380000 {
> + compatible = "qcom,sc7280-lpassaoncc";
> + reg = <0 0x03380000 0 0x30000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&rpmhcc RPMH_CXO_CLK_A>,
> + <&lpasscore LPASS_CORE_CC_CORE_CLK>;
> + clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
> + #clock-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + lpasscore: clock-controller@3900000 {
nit: lpass_core?
The other labels have an underscore, it wouldn't hurt to be consistent.
> + compatible = "qcom,sc7280-lpasscorecc";
> + reg = <0 0x03900000 0 0x50000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "bi_tcxo";
> + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
> + #clock-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + lpass_hm: clock-controller@3c00000 {
> + compatible = "qcom,sc7280-lpasshm";
> + reg = <0 0x3c00000 0 0x28>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "bi_tcxo";
> + #clock-cells = <1>;
> + #power-domain-cells = <1>;
> };
>
> lpass_ag_noc: interconnect@3c40000 {
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers
2022-05-03 18:58 ` Matthias Kaehlcke
@ 2022-05-04 5:40 ` Taniya Das
0 siblings, 0 replies; 6+ messages in thread
From: Taniya Das @ 2022-05-04 5:40 UTC (permalink / raw)
To: Matthias Kaehlcke
Cc: Rob Herring, Bjorn Andersson, Douglas Anderson, Stephen Boyd,
devicetree, linux-arm-msm, linux-kernel
Hello Matthias,
On 5/4/2022 12:28 AM, Matthias Kaehlcke wrote:
> On Tue, May 03, 2022 at 05:02:46PM +0530, Taniya Das wrote:
>> Add the low pass audio clock controller device nodes. Keep the lpasscc
>> clock node disabled and enabled for lpass pil based devices.
>>
>> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
>> ---
>> [v4]
>> * Mark lpasscc[lpasscc@3000000] device node as "disabled".
>>
>> [v3]
>> * Fix unwanted extra spaces in reg property.
>> * Fix lpass_aon node clock phandle <&lpasscc> to <&lpasscore>
>>
>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 44 ++++++++++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index f0b64be63c21..477a754741a1 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -8,6 +8,8 @@
>> #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
>> #include <dt-bindings/clock/qcom,gcc-sc7280.h>
>> #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
>> +#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
>> +#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
>> #include <dt-bindings/clock/qcom,rpmh.h>
>> #include <dt-bindings/clock/qcom,videocc-sc7280.h>
>> #include <dt-bindings/gpio/gpio.h>
>> @@ -1978,6 +1980,48 @@
>> clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
>> clock-names = "iface";
>> #clock-cells = <1>;
>> + status = "disabled";
>> + };
>> +
>> + lpass_audiocc: clock-controller@3300000 {
>> + compatible = "qcom,sc7280-lpassaudiocc";
>> + reg = <0 0x03300000 0 0x30000>;
>> + clocks = <&rpmhcc RPMH_CXO_CLK>,
>> + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
>> + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
>> + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
>> + #clock-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + lpass_aon: clock-controller@3380000 {
>> + compatible = "qcom,sc7280-lpassaoncc";
>> + reg = <0 0x03380000 0 0x30000>;
>> + clocks = <&rpmhcc RPMH_CXO_CLK>,
>> + <&rpmhcc RPMH_CXO_CLK_A>,
>> + <&lpasscore LPASS_CORE_CC_CORE_CLK>;
>> + clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
>> + #clock-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + lpasscore: clock-controller@3900000 {
>
> nit: lpass_core?
>
> The other labels have an underscore, it wouldn't hurt to be consistent.
Sure, will take care in the next patch.
>
>> + compatible = "qcom,sc7280-lpasscorecc";
>> + reg = <0 0x03900000 0 0x50000>;
>> + clocks = <&rpmhcc RPMH_CXO_CLK>;
>> + clock-names = "bi_tcxo";
>> + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
>> + #clock-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + lpass_hm: clock-controller@3c00000 {
>> + compatible = "qcom,sc7280-lpasshm";
>> + reg = <0 0x3c00000 0 0x28>;
>> + clocks = <&rpmhcc RPMH_CXO_CLK>;
>> + clock-names = "bi_tcxo";
>> + #clock-cells = <1>;
>> + #power-domain-cells = <1>;
>> };
>>
>> lpass_ag_noc: interconnect@3c40000 {
>> --
--
Thanks & Regards,
Taniya Das.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers
2022-05-03 11:32 [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers Taniya Das
2022-05-03 18:58 ` Matthias Kaehlcke
@ 2022-05-03 19:10 ` Stephen Boyd
2022-05-04 5:35 ` Taniya Das
1 sibling, 1 reply; 6+ messages in thread
From: Stephen Boyd @ 2022-05-03 19:10 UTC (permalink / raw)
To: Bjorn Andersson, Rob Herring, Taniya Das
Cc: Douglas Anderson, devicetree, linux-arm-msm, linux-kernel
Quoting Taniya Das (2022-05-03 04:32:46)
> Add the low pass audio clock controller device nodes. Keep the lpasscc
> clock node disabled and enabled for lpass pil based devices.
Does it mean that we're going to have overlapping reg ranges between
nodes in DT for clk controllers? That is not proper DT style, indicating
that we should combine the overlapping nodes and then have some
compatible or DT property telling us how to treat the clks in the audio
subsystem.
>
> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
> ---
> [v4]
> * Mark lpasscc[lpasscc@3000000] device node as "disabled".
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers
2022-05-03 19:10 ` Stephen Boyd
@ 2022-05-04 5:35 ` Taniya Das
2022-05-17 8:31 ` Stephen Boyd
0 siblings, 1 reply; 6+ messages in thread
From: Taniya Das @ 2022-05-04 5:35 UTC (permalink / raw)
To: Stephen Boyd, Bjorn Andersson, Rob Herring
Cc: Douglas Anderson, devicetree, linux-arm-msm, linux-kernel
Hello Stephen,
On 5/4/2022 12:40 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2022-05-03 04:32:46)
>> Add the low pass audio clock controller device nodes. Keep the lpasscc
>> clock node disabled and enabled for lpass pil based devices.
>
> Does it mean that we're going to have overlapping reg ranges between
> nodes in DT for clk controllers? That is not proper DT style, indicating
> that we should combine the overlapping nodes and then have some
> compatible or DT property telling us how to treat the clks in the audio
> subsystem.
>
In the case where PIL based LPASS node would be used, we would disable
the other lpass clock controller nodes. Does that seem fine or I would
need to map the complete range in the current PIL driver if that works.
>>
>> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
>> ---
>> [v4]
>> * Mark lpasscc[lpasscc@3000000] device node as "disabled".
--
Thanks & Regards,
Taniya Das.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers
2022-05-04 5:35 ` Taniya Das
@ 2022-05-17 8:31 ` Stephen Boyd
0 siblings, 0 replies; 6+ messages in thread
From: Stephen Boyd @ 2022-05-17 8:31 UTC (permalink / raw)
To: Bjorn Andersson, Rob Herring, Taniya Das
Cc: Douglas Anderson, devicetree, linux-arm-msm, linux-kernel,
Srinivasa Rao Mandadapu
Quoting Taniya Das (2022-05-03 22:35:29)
> Hello Stephen,
>
> On 5/4/2022 12:40 AM, Stephen Boyd wrote:
> > Quoting Taniya Das (2022-05-03 04:32:46)
> >> Add the low pass audio clock controller device nodes. Keep the lpasscc
> >> clock node disabled and enabled for lpass pil based devices.
> >
> > Does it mean that we're going to have overlapping reg ranges between
> > nodes in DT for clk controllers? That is not proper DT style, indicating
> > that we should combine the overlapping nodes and then have some
> > compatible or DT property telling us how to treat the clks in the audio
> > subsystem.
> >
>
> In the case where PIL based LPASS node would be used, we would disable
> the other lpass clock controller nodes. Does that seem fine or I would
> need to map the complete range in the current PIL driver if that works.
>
Is the idea that we would have a set of nodes that have overlapping reg
ranges but only one or the other would be enabled? That seems confusing.
Why don't we simply have one node that has a different compatible string
or some DT property that reflects the programming model of choice? Or
use the protected-clocks property to list out the clks that we don't
want to have registered on the system.
We shouldn't need to have two entirely different nodes for the same
physical device in the SoC, so talking about PIL based LPASS is
confusing. Can you explain further?
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-05-17 8:31 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-03 11:32 [PATCH v4] arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers Taniya Das
2022-05-03 18:58 ` Matthias Kaehlcke
2022-05-04 5:40 ` Taniya Das
2022-05-03 19:10 ` Stephen Boyd
2022-05-04 5:35 ` Taniya Das
2022-05-17 8:31 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).