[PATCH 3.2 00/70] 3.2.76-rc1 review

[PATCH 3.2 00/70] 3.2.76-rc1 review

[Ben Hutchings]

This is the start of the stable review cycle for the 3.2.76 release.
There are 70 patches in this series, which will be posted as responses
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Jan 20 18:00:00 UTC 2016.
Anything received after that time might be too late.

A combined patch relative to 3.2.75 will be posted as an additional
response to this.  A shortlog and diffstat can be found below.

Ben.

-------------

Alan Cox (1):
      i2c: i801: Add PCI ID for Intel Braswell
         [39e8e30ee544a62c148033d64a979028b958ca05]

Alan Stern (1):
      USB: fix invalid memory access in hub_activate()
         [e50293ef9775c5f1cf3fcc093037dd6a8c5684ea]

Alexandra Yates (3):
      ahci: Order SATA device IDs for codename Lewisburg
         [4d92f0099a06ef0e36c7673f7c090f1a448b2d1b]
      ahci: add new Intel device IDs
         [56e74338a535cbcc2f2da08b1ea1a92920194364]
      i2c: i801: add Intel Lewisburg device IDs
         [cdc5a3110e7c3ae793f367285789a6bc39c962dc]

Andrew Banman (1):
      mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone()
         [5f0f2887f4de9508dcf438deab28f1de8070c271]

Andrew Honig (1):
      KVM: x86: Reload pit counters for all channels when restoring state
         [0185604c2d82c560dab2f2933a18f797e74ab5a8]

Andrey Ryabinin (1):
      ipv6/addrlabel: fix ip6addrlbl_get()
         [e459dfeeb64008b2d23bdf600f03b3605dbb8152]

Anssi Hannula (1):
      ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly
         [42e3121d90f42e57f6dbd6083dff2f57b3ec7daa]

Ben Hutchings (2):
      Revert "net: add length argument to skb_copy_and_csum_datagram_iovec"
         [not upstream; reverted patch was never applied there]
      ahci: Add JMicron 362 device IDs
         [1fefb8fdc6562057a0e4e4542f3d4323981c9686]

Charles_Rose@Dell.com (1):
      ahci: Add Device ID for Intel Sunrise Point PCH
         [c5967b79ecabe2baca40658d9073e28b30d7f6cf]

Clemens Ladisch (2):
      ALSA: tlv: add DECLARE_TLV_DB_RANGE()
         [bf1d1c9b6179faa3bc32cee882462bc8eebde25d]
      ALSA: tlv: compute TLV_*_ITEM lengths automatically
         [b5b9eb546762c4015c67c31364a6ec6f83fd2ada]

Colin Ian King (1):
      ftrace/scripts: Fix incorrect use of sprintf in recordmcount
         [713a3e4de707fab49d5aa4bceb77db1058572a7b]

Dan Carpenter (2):
      USB: ipaq.c: fix a timeout loop
         [abdc9a3b4bac97add99e1d77dc6d28623afe682b]
      mISDN: fix a loop count
         [40d24c4d8a7430aa4dfd7a665fa3faf3b05b673f]

Dave Airlie (1):
      drm/radeon: fix hotplug race at startup
         [7f98ca454ad373fc1b76be804fa7138ff68c1d27]

David Howells (1):
      KEYS: Fix race between read and revoke
         [b4a1b4f5047e4f54e194681125c74c0aa64d637d]

David Vrabel (3):
      xen-netback: don't use last request to determine minimum Tx credit
         [0f589967a73f1f30ab4ac4dd9ce0bb399b4d6357]
      xen-netback: use RING_COPY_REQUEST() throughout
         [68a33bfd8403e4e22847165d149823a2e0e67c9c]
      xen: Add RING_COPY_REQUEST()
         [454d5d882c7e412b840e3c99010fe81a9862f6fb]

Devin Ryles (1):
      i2c: i801: Add DeviceIDs for SunrisePoint LP
         [3eee1799aed90e990e02a73a89bfcff1982c74dd]

Ed Swierk (1):
      MIPS: Fix restart of indirect syscalls
         [e967ef022e00bb7c2e5b1a42007abfdd52055050]

Eric Dumazet (2):
      ipv6: sctp: fix lockdep splat in sctp_v6_get_dst()
         [69ce6487dcd364245a3d26322fc8f4ffd1e8d947]
      udp: properly support MSG_PEEK with truncated buffers
         [197c949e7798fbf28cfadc69d9ca0c2abbf93191]

Francesco Ruggeri (1):
      net: possible use after free in dst_release
         [07a5d38453599052aff0877b16bb9c1585f08609]

Georgios Toptsidis (1):
      cdrom: Random writing support for BD-RE media
         [f7e7868b4743f1cc5e59e6e0ddd3ccf9cfe53a1b]

Hannes Frederic Sowa (1):
      net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration
         [7bbadd2d1009575dad675afc16650ebb5aa10612]

Helge Deller (1):
      parisc: Fix syscall restarts
         [71a71fb5374a23be36a91981b5614590b9e722c3]

James Bottomley (2):
      ses: Fix problems with simple enclosures
         [3417c1b5cb1fdc10261dbed42b05cc93166a78fd]
      ses: fix additional element traversal bug
         [5e1033561da1152c57b97ee84371dba2b3d64c25]

James Ralston (4):
      ahci: Add Device IDs for Intel Wellsburg PCH
         [efda332cb66d78d6fdf6f98e7b067480f43624f2]
      ahci: Remove Device ID for Intel Sunrise Point PCH
         [46319e13581a6c442b0a0e5a3bd5d9af4496f252]
      i2c: i801: Add Device IDs for Intel Wellsburg PCH
         [a3fc0ff00a46c4b32e7214961a5be9a1dc39b60e]
      i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH
         [afc659241258b40b683998ec801d25d276529f43]

James.D.Ralston@Intel.Com (1):
      i2c: i801: Add Device IDs for Intel Sunrise Point PCH
         [3e27a8445c21f8056517f188303827450590d868]

Jarkko Nikula (2):
      i2c: i801: Add support for Intel Broxton
         [dd77f423e516293c37c2370b44fd700900409c48]
      i2c: i801: Document Intel DNV and Broxton
         [2b630df721ee4c286d286ab5d5d958d34c86f067]

Jason A. Donenfeld (1):
      crypto: skcipher - Copy iv from desc even for 0-len walks
         [70d906bc17500edfa9bdd8c8b7e59618c7911613]

Jean Delvare (2):
      i2c: i801: Add device ID for Intel Wildcat Point PCH
         [b299de839157852c563b9f133c8b7e630545a9c3]
      i2c: i801: Fix the alignment of the device table
         [ce3161106ab57afbfbe1c33d95bf4a569405983a]

Johan Hovold (1):
      spi: fix parent-device reference leak
         [157f38f993919b648187ba341bfb05d0e91ad2f6]

Johannes Berg (1):
      rfkill: copy the name into the rfkill struct
         [b7bb110008607a915298bf0f47d25886ecb94477]

Johannes Thumshirn (1):
      ahci: Add Marvell 88se91a2 device id
         [a40cf3f38881ce8543ceb9667150b4f2ead4c437]

Joseph Qi (1):
      ocfs2: fix BUG when calculate new backup super
         [5c9ee4cbf2a945271f25b89b137f2c03bbc3be33]

Kean ho Chew (1):
      i2c: i801: enable Intel BayTrail SMBUS
         [1b31e9b76ef8c62291e698dfdb973499986a7f68]

Konrad Rzeszutek Wilk (6):
      xen/pciback: Do not install an IRQ handler for MSI interrupts.
         [a396f3a210c3a61e94d6b87ec05a75d0be2a60d0]
      xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
         [408fb0e5aa7fda0059db282ff58c3b2a4278baa0]
      xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.
         [7cfb905b9638982862f0331b36ccaaca5d383b49]
      xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled
         [56441f3c8e5bd45aab10dd9f8c505dd4bec03b0d]
      xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled
         [5e0ce1455c09dd61d029b8ad45d82e1ac0b6c4c9]
      xen/pciback: Save xen_pci_op commands before processing it
         [8135cf8b092723dbfcc611fe6fdcb3a36c9951c5]

Lucien (1):
      sctp: start t5 timer only when peer rwnd is 0 and local state is SHUTDOWN_PENDING
         [8a0d19c5ed417c78d03f4e0fa7215e58c40896d8]

Maciej Zuk (1):
      HID: dragonrise: fix HID Descriptor for 0x0006 PID
         [18339f59c3a6698ee17d32970c9e1e450b16e7c3]

Michael Holzheu (1):
      s390/dis: Fix handling of format specifiers
         [272fa59ccb4fc802af28b1d699c2463db6a71bf7]

Michal Hocko (1):
      vmstat: allocate vmstat_wq before it is used
         [751e5f5c753e8d447bcf89f9e96b9616ac081628]

Mika Westerberg (1):
      i2c: i801: Add support for Intel DNV
         [84d7f2ebd70d36e9d83e0973d2f4dac56a671f4f]

Nikolay Aleksandrov (1):
      net/core: revert "net: fix __netdev_update_features return.." and add comment
         [17b85d29e82cc3c874a497a8bc5764d6a2b043e2]

Paolo Bonzini (1):
      kvm: x86: only channel 0 of the i8254 is linked to the HPET
         [e5e57e7a03b1cdcb98e4aed135def2a08cbf3257]

Peter Hurley (1):
      tty: Fix GPF in flush_to_ldisc()
         [9ce119f318ba1a07c29149301f1544b6c4bea52a]

Roger Pau Monné (1):
      xen-blkback: only read request operation from shared ring once
         [1f13d75ccb806260079e0679d55d9253e370ec8a]

Russell King (1):
      scripts: recordmcount: break hardlinks
         [dd39a26538e37f6c6131e829a4a510787e43c783]

Sergei Shtylyov (1):
      sh_eth: fix TX buffer byte-swapping
         [3e2309937f1e5d538ff13da5fb8de41196927c61]

Seth Heasley (2):
      i2c: i801: SMBus patch for Intel Avoton DeviceIDs
         [c2db409cbc8751ccc7e6d2cc2e41af0d12ea637f]
      i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs
         [f39901c1befa556bc91902516a3e2e460000b4a8]

Steven Rostedt (1):
      ftrace/scripts: Have recordmcount copy the object file
         [a50bd43935586420fb75f4558369eb08566fac5e]

Thomas Gleixner (1):
      genirq: Prevent chip buslock deadlock
         [abc7e40c81d113ef4bacb556f0a77ca63ac81d85]

Tilman Schmidt (1):
      ser_gigaset: fix deallocation of platform device structure
         [4c5e354a974214dfb44cd23fa0429327693bc3ea]

Wang Dongsheng (1):
      video: fbdev: fsl: Fix kernel crash when diu_ops is not implemented
         [acfc1cc13fe5bc6d7a10afa624f1e560850ddad3]

 Documentation/i2c/busses/i2c-i801       |  11 +++
 Makefile                                |   4 +-
 arch/mips/kernel/scall32-o32.S          |   1 +
 arch/mips/kernel/scall64-o32.S          |   1 +
 arch/parisc/kernel/signal.c             |  64 ++++++++++---
 arch/s390/kernel/dis.c                  |  15 +++-
 arch/x86/kvm/i8254.c                    |   1 +
 arch/x86/kvm/x86.c                      |  10 ++-
 crypto/ablkcipher.c                     |   2 +-
 crypto/blkcipher.c                      |   2 +-
 drivers/ata/ahci.c                      |  20 ++++-
 drivers/block/xen-blkback/common.h      |   8 +-
 drivers/cdrom/cdrom.c                   |   1 +
 drivers/gpu/drm/radeon/radeon_irq_kms.c |   5 ++
 drivers/hid/hid-dr.c                    |  58 ++++++++++++
 drivers/i2c/busses/Kconfig              |  11 +++
 drivers/i2c/busses/i2c-i801.c           | 154 +++++++++++++++++++++-----------
 drivers/isdn/gigaset/ser-gigaset.c      |  10 ++-
 drivers/isdn/hardware/mISDN/mISDNipac.c |   7 +-
 drivers/net/ethernet/renesas/sh_eth.c   |   3 +-
 drivers/net/xen-netback/netback.c       |  34 ++++---
 drivers/scsi/ses.c                      |  30 ++++++-
 drivers/spi/spi.c                       |   2 +-
 drivers/tty/tty_buffer.c                |   8 +-
 drivers/usb/core/hub.c                  |  24 ++++-
 drivers/usb/serial/ipaq.c               |   3 +-
 drivers/video/fsl-diu-fb.c              |  13 ++-
 drivers/xen/xen-pciback/pciback.h       |   1 +
 drivers/xen/xen-pciback/pciback_ops.c   |  75 ++++++++++++----
 fs/ocfs2/resize.c                       |  15 +++-
 include/linux/enclosure.h               |   4 +
 include/linux/skbuff.h                  |   3 +-
 include/net/sctp/structs.h              |   3 +-
 include/net/sock.h                      |   2 +-
 include/sound/tlv.h                     |  24 +++--
 include/xen/interface/io/ring.h         |  14 +++
 kernel/irq/manage.c                     |   6 +-
 mm/memory_hotplug.c                     |  31 ++++---
 mm/vmstat.c                             |   3 +-
 net/core/datagram.c                     |   6 +-
 net/core/dev.c                          |   5 +-
 net/core/dst.c                          |   3 +-
 net/ipv4/tcp_input.c                    |   2 +-
 net/ipv4/udp.c                          |   8 +-
 net/ipv6/addrlabel.c                    |   2 +-
 net/ipv6/raw.c                          |   2 +-
 net/ipv6/udp.c                          |   9 +-
 net/rfkill/core.c                       |   6 +-
 net/rxrpc/ar-recvmsg.c                  |   3 +-
 net/sctp/ipv6.c                         |   3 +-
 net/sctp/outqueue.c                     |   1 +
 net/sctp/sm_statefuns.c                 |   3 +-
 scripts/recordmcount.c                  | 137 +++++++++++++++++++++++-----
 security/keys/keyctl.c                  |  18 ++--
 sound/usb/mixer.c                       |   2 +
 sound/usb/mixer_maps.c                  |  12 ---
 sound/usb/mixer_quirks.c                |  37 ++++++++
 sound/usb/mixer_quirks.h                |   4 +
 58 files changed, 710 insertions(+), 236 deletions(-)

-- 
Ben Hutchings
A free society is one where it is safe to be unpopular. - Adlai Stevenson

[PATCH 3.2 10/70] ALSA: tlv: add DECLARE_TLV_DB_RANGE()

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit bf1d1c9b6179faa3bc32cee882462bc8eebde25d upstream.

Add a DECLARE_TLV_DB_RANGE() macro so that dB range information
can be specified without having to count the items manually for
TLV_DB_RANGE_HEAD().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/sound/tlv.h | 4 ++++
 1 file changed, 4 insertions(+)

--- a/include/sound/tlv.h
+++ b/include/sound/tlv.h
@@ -71,6 +71,10 @@
 
 /* dB range container */
 /* Each item is: <min> <max> <TLV> */
+#define TLV_DB_RANGE_ITEM(...) \
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_RANGE, __VA_ARGS__)
+#define DECLARE_TLV_DB_RANGE(name, ...) \
+	unsigned int name[] = { TLV_DB_RANGE_ITEM(__VA_ARGS__) }
 /* The below assumes that each item TLV is 4 words like DB_SCALE or LINEAR */
 #define TLV_DB_RANGE_HEAD(num)			\
 	SNDRV_CTL_TLVT_DB_RANGE, 6 * (num) * sizeof(unsigned int)

[PATCH 3.2 12/70] sh_eth: fix TX buffer byte-swapping

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

commit 3e2309937f1e5d538ff13da5fb8de41196927c61 upstream.

For the little-endian SH771x kernels the driver has to byte-swap the RX/TX
buffers,  however yet unset physcial address from the TX descriptor is used
to call sh_eth_soft_swap(). Use 'skb->data' instead...

Fixes: 31fcb99d9958 ("net: sh_eth: remove __flush_purge_region")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/ethernet/renesas/sh_eth.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1499,8 +1499,7 @@ static int sh_eth_start_xmit(struct sk_b
 	txdesc = &mdp->tx_ring[entry];
 	/* soft swap. */
 	if (!mdp->cd->hw_swap)
-		sh_eth_soft_swap(phys_to_virt(ALIGN(txdesc->addr, 4)),
-				 skb->len + 2);
+		sh_eth_soft_swap(PTR_ALIGN(skb->data, 4), skb->len + 2);
 	txdesc->addr = dma_map_single(&ndev->dev, skb->data, skb->len,
 				      DMA_TO_DEVICE);
 	if (skb->len < ETHERSMALL)

[PATCH 3.2 22/70] xen-netback: use RING_COPY_REQUEST() throughout

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: David Vrabel <david.vrabel@citrix.com>

commit 68a33bfd8403e4e22847165d149823a2e0e67c9c upstream.

Instead of open-coding memcpy()s and directly accessing Tx and Rx
requests, use the new RING_COPY_REQUEST() that ensures the local copy
is correct.

This is more than is strictly necessary for guest Rx requests since
only the id and gref fields are used and it is harmless if the
frontend modifies these.

This is part of XSA155.

Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[bwh: Backported to 3.2:
 - s/queue/vif/g
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/xen-netback/netback.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -406,17 +406,17 @@ static struct netbk_rx_meta *get_next_rx
 						struct netrx_pending_operations *npo)
 {
 	struct netbk_rx_meta *meta;
-	struct xen_netif_rx_request *req;
+	struct xen_netif_rx_request req;
 
-	req = RING_GET_REQUEST(&vif->rx, vif->rx.req_cons++);
+	RING_COPY_REQUEST(&vif->rx, vif->rx.req_cons++, &req);
 
 	meta = npo->meta + npo->meta_prod++;
 	meta->gso_size = 0;
 	meta->size = 0;
-	meta->id = req->id;
+	meta->id = req.id;
 
 	npo->copy_off = 0;
-	npo->copy_gref = req->gref;
+	npo->copy_gref = req.gref;
 
 	return meta;
 }
@@ -518,7 +518,7 @@ static int netbk_gop_skb(struct sk_buff
 	struct xenvif *vif = netdev_priv(skb->dev);
 	int nr_frags = skb_shinfo(skb)->nr_frags;
 	int i;
-	struct xen_netif_rx_request *req;
+	struct xen_netif_rx_request req;
 	struct netbk_rx_meta *meta;
 	unsigned char *data;
 	int head = 1;
@@ -528,14 +528,14 @@ static int netbk_gop_skb(struct sk_buff
 
 	/* Set up a GSO prefix descriptor, if necessary */
 	if (skb_shinfo(skb)->gso_size && vif->gso_prefix) {
-		req = RING_GET_REQUEST(&vif->rx, vif->rx.req_cons++);
+		RING_COPY_REQUEST(&vif->rx, vif->rx.req_cons++, &req);
 		meta = npo->meta + npo->meta_prod++;
 		meta->gso_size = skb_shinfo(skb)->gso_size;
 		meta->size = 0;
-		meta->id = req->id;
+		meta->id = req.id;
 	}
 
-	req = RING_GET_REQUEST(&vif->rx, vif->rx.req_cons++);
+	RING_COPY_REQUEST(&vif->rx, vif->rx.req_cons++, &req);
 	meta = npo->meta + npo->meta_prod++;
 
 	if (!vif->gso_prefix)
@@ -544,9 +544,9 @@ static int netbk_gop_skb(struct sk_buff
 		meta->gso_size = 0;
 
 	meta->size = 0;
-	meta->id = req->id;
+	meta->id = req.id;
 	npo->copy_off = 0;
-	npo->copy_gref = req->gref;
+	npo->copy_gref = req.gref;
 
 	data = skb->data;
 	while (data < skb_tail_pointer(skb)) {
@@ -890,7 +890,7 @@ static void netbk_tx_err(struct xenvif *
 		make_tx_response(vif, txp, XEN_NETIF_RSP_ERROR);
 		if (cons == end)
 			break;
-		txp = RING_GET_REQUEST(&vif->tx, cons++);
+		RING_COPY_REQUEST(&vif->tx, cons++, txp);
 	} while (1);
 	vif->tx.req_cons = cons;
 	xen_netbk_check_rx_xenvif(vif);
@@ -957,8 +957,7 @@ static int netbk_count_requests(struct x
 		if (drop_err)
 			txp = &dropped_tx;
 
-		memcpy(txp, RING_GET_REQUEST(&vif->tx, cons + slots),
-		       sizeof(*txp));
+		RING_COPY_REQUEST(&vif->tx, cons + slots, txp);
 
 		/* If the guest submitted a frame >= 64 KiB then
 		 * first->size overflowed and following slots will
@@ -1246,8 +1245,7 @@ static int xen_netbk_get_extras(struct x
 			return -EBADR;
 		}
 
-		memcpy(&extra, RING_GET_REQUEST(&vif->tx, cons),
-		       sizeof(extra));
+		RING_COPY_REQUEST(&vif->tx, cons, &extra);
 		if (unlikely(!extra.type ||
 			     extra.type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
 			vif->tx.req_cons = ++cons;
@@ -1442,7 +1440,7 @@ static unsigned xen_netbk_tx_build_gops(
 
 		idx = vif->tx.req_cons;
 		rmb(); /* Ensure that we see the request before we copy it. */
-		memcpy(&txreq, RING_GET_REQUEST(&vif->tx, idx), sizeof(txreq));
+		RING_COPY_REQUEST(&vif->tx, idx, &txreq);
 
 		/* Credit-based scheduling. */
 		if (txreq.size > vif->remaining_credit &&

[PATCH 3.2 20/70] xen: Add RING_COPY_REQUEST()

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: David Vrabel <david.vrabel@citrix.com>

commit 454d5d882c7e412b840e3c99010fe81a9862f6fb upstream.

Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly
(i.e., by not considering that the other end may alter the data in the
shared ring while it is being inspected).  Safe usage of a request
generally requires taking a local copy.

Provide a RING_COPY_REQUEST() macro to use instead of
RING_GET_REQUEST() and an open-coded memcpy().  This takes care of
ensuring that the copy is done correctly regardless of any possible
compiler optimizations.

Use a volatile source to prevent the compiler from reordering or
omitting the copy.

This is part of XSA155.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/xen/interface/io/ring.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/include/xen/interface/io/ring.h
+++ b/include/xen/interface/io/ring.h
@@ -181,6 +181,20 @@ struct __name##_back_ring {						\
 #define RING_GET_REQUEST(_r, _idx)					\
     (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
 
+/*
+ * Get a local copy of a request.
+ *
+ * Use this in preference to RING_GET_REQUEST() so all processing is
+ * done on a local copy that cannot be modified by the other end.
+ *
+ * Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this
+ * to be ineffective where _req is a struct which consists of only bitfields.
+ */
+#define RING_COPY_REQUEST(_r, _idx, _req) do {				\
+	/* Use volatile to force the copy into _req. */			\
+	*(_req) = *(volatile typeof(_req))RING_GET_REQUEST(_r, _idx);	\
+} while (0)
+
 #define RING_GET_RESPONSE(_r, _idx)					\
     (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
 

[PATCH 3.2 35/70] ocfs2: fix BUG when calculate new backup super

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Joseph Qi <joseph.qi@huawei.com>

commit 5c9ee4cbf2a945271f25b89b137f2c03bbc3be33 upstream.

When resizing, it firstly extends the last gd.  Once it should backup
super in the gd, it calculates new backup super and update the
corresponding value.

But it currently doesn't consider the situation that the backup super is
already done.  And in this case, it still sets the bit in gd bitmap and
then decrease from bg_free_bits_count, which leads to a corrupted gd and
trigger the BUG in ocfs2_block_group_set_bits:

    BUG_ON(le16_to_cpu(bg->bg_free_bits_count) < num_bits);

So check whether the backup super is done and then do the updates.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jiufei Xue <xuejiufei@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ocfs2/resize.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/fs/ocfs2/resize.c
+++ b/fs/ocfs2/resize.c
@@ -56,11 +56,12 @@ static u16 ocfs2_calc_new_backup_super(s
 				       int new_clusters,
 				       u32 first_new_cluster,
 				       u16 cl_cpg,
+				       u16 old_bg_clusters,
 				       int set)
 {
 	int i;
 	u16 backups = 0;
-	u32 cluster;
+	u32 cluster, lgd_cluster;
 	u64 blkno, gd_blkno, lgd_blkno = le64_to_cpu(gd->bg_blkno);
 
 	for (i = 0; i < OCFS2_MAX_BACKUP_SUPERBLOCKS; i++) {
@@ -73,6 +74,12 @@ static u16 ocfs2_calc_new_backup_super(s
 		else if (gd_blkno > lgd_blkno)
 			break;
 
+		/* check if already done backup super */
+		lgd_cluster = ocfs2_blocks_to_clusters(inode->i_sb, lgd_blkno);
+		lgd_cluster += old_bg_clusters;
+		if (lgd_cluster >= cluster)
+			continue;
+
 		if (set)
 			ocfs2_set_bit(cluster % cl_cpg,
 				      (unsigned long *)gd->bg_bitmap);
@@ -101,6 +108,7 @@ static int ocfs2_update_last_group_and_i
 	u16 chain, num_bits, backups = 0;
 	u16 cl_bpc = le16_to_cpu(cl->cl_bpc);
 	u16 cl_cpg = le16_to_cpu(cl->cl_cpg);
+	u16 old_bg_clusters;
 
 	trace_ocfs2_update_last_group_and_inode(new_clusters,
 						first_new_cluster);
@@ -114,6 +122,7 @@ static int ocfs2_update_last_group_and_i
 
 	group = (struct ocfs2_group_desc *)group_bh->b_data;
 
+	old_bg_clusters = le16_to_cpu(group->bg_bits) / cl_bpc;
 	/* update the group first. */
 	num_bits = new_clusters * cl_bpc;
 	le16_add_cpu(&group->bg_bits, num_bits);
@@ -129,7 +138,7 @@ static int ocfs2_update_last_group_and_i
 						     group,
 						     new_clusters,
 						     first_new_cluster,
-						     cl_cpg, 1);
+						     cl_cpg, old_bg_clusters, 1);
 		le16_add_cpu(&group->bg_free_bits_count, -1 * backups);
 	}
 
@@ -169,7 +178,7 @@ out_rollback:
 					    group,
 					    new_clusters,
 					    first_new_cluster,
-					    cl_cpg, 0);
+					    cl_cpg, old_bg_clusters, 0);
 		le16_add_cpu(&group->bg_free_bits_count, backups);
 		le16_add_cpu(&group->bg_bits, -1 * num_bits);
 		le16_add_cpu(&group->bg_free_bits_count, -1 * num_bits);

[PATCH 3.2 65/70] i2c: i801: Add support for Intel DNV

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 84d7f2ebd70d36e9d83e0973d2f4dac56a671f4f upstream.

Intel DNV SoC has the same legacy SMBus host controller than Intel
Sunrisepoint PCH. It also has same iTCO watchdog on the bus.

Add DNV PCI ID to the list of supported devices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
[bwh: Backported to 3.2: no FEATURE_IRQ or FEATURE_TCO here]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/i2c/busses/i2c-i801.c | 4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -64,6 +64,7 @@
  * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
  * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
  * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
+ * DNV (SOC)			0x19df	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -172,6 +173,7 @@
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
+#define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -674,6 +676,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 58/70] i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: James Ralston <james.d.ralston@intel.com>

commit afc659241258b40b683998ec801d25d276529f43 upstream.

This patch adds the SMBus Device IDs for the Intel Wildcat Point-LP PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -25,6 +25,7 @@ Supported adapters:
   * Intel Avoton (SOC)
   * Intel Wellsburg (PCH)
   * Intel Coleto Creek (PCH)
+  * Intel Wildcat Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -108,6 +108,7 @@ config I2C_I801
 	    Avoton (SOC)
 	    Wellsburg (PCH)
 	    Coleto Creek (PCH)
+	    Wildcat Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -59,6 +59,7 @@
   Wellsburg (PCH) MS    0x8d7e     32     hard     yes     yes     yes
   Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
   Coleto Creek (PCH)    0x23b0     32     hard     yes     yes     yes
+  Wildcat Point-LP (PCH)   0x9ca2     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -161,6 +162,7 @@
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1	0x8d7e
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2	0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -657,6 +659,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 38/70] drm/radeon: fix hotplug race at startup

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit 7f98ca454ad373fc1b76be804fa7138ff68c1d27 upstream.

We apparantly get a hotplug irq before we've initialised
modesetting,

[drm] Loading R100 Microcode
BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys
CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111
Hardware name: MicroLink                               /D850MV                         , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003
Workqueue: events radeon_hotplug_work_func [radeon]
task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000
EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0
EIP is at __mutex_lock_slowpath+0x23/0x91
EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe
ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0
Stack:
 f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca
 f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0
 c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940
Call Trace:
 [<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7
 [<c125f162>] ? mutex_lock+0x9/0xa
 [<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon]
 [<c1034741>] ? process_one_work+0xfc/0x194
 [<c1034b58>] ? worker_thread+0x18d/0x218
 [<c10349cb>] ? rescuer_thread+0x1d5/0x1d5
 [<c103742a>] ? kthread+0x7b/0x80
 [<c12601c0>] ? ret_from_kernel_thread+0x20/0x30
 [<c10373af>] ? init_completion+0x18/0x18
Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63

Reported-and-Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_irq_kms.c | 5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -51,6 +51,11 @@ static void radeon_hotplug_work_func(str
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
 
+	/* we can race here at startup, some boards seem to trigger
+	 * hotplug irqs when they shouldn't. */
+	if (!rdev->mode_info.mode_config_initialized)
+		return;
+
 	mutex_lock(&mode_config->mutex);
 	if (mode_config->num_connector) {
 		list_for_each_entry(connector, &mode_config->connector_list, head)

[PATCH 3.2 56/70] i2c: i801: Add Device IDs for Intel Wellsburg PCH

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: James Ralston <james.d.ralston@intel.com>

commit a3fc0ff00a46c4b32e7214961a5be9a1dc39b60e upstream.

This patch adds the SMBus Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 |  1 +
 drivers/i2c/busses/Kconfig        |  1 +
 drivers/i2c/busses/i2c-i801.c     | 15 +++++++++++++++
 3 files changed, 17 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -23,6 +23,7 @@ Supported adapters:
   * Intel Lynx Point (PCH)
   * Intel Lynx Point-LP (PCH)
   * Intel Avoton (SOC)
+  * Intel Wellsburg (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -106,6 +106,7 @@ config I2C_I801
 	    Lynx Point (PCH)
 	    Lynx Point-LP (PCH)
 	    Avoton (SOC)
+	    Wellsburg (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -54,6 +54,10 @@
   Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
   Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
   Avoton (SOC)          0x1f3c     32     hard     yes     yes     yes
+  Wellsburg (PCH)       0x8d22     32     hard     yes     yes     yes
+  Wellsburg (PCH) MS    0x8d7d     32     hard     yes     yes     yes
+  Wellsburg (PCH) MS    0x8d7e     32     hard     yes     yes     yes
+  Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -150,6 +154,10 @@
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS	0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0	0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1	0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2	0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
 
 struct i801_priv {
@@ -642,6 +650,10 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
 	{ 0, }
 };
 
@@ -789,6 +801,9 @@ static int __devinit i801_probe(struct p
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
 		priv->features |= FEATURE_IDF;
 		/* fall through */
 	default:

[PATCH 3.2 23/70] xen-blkback: only read request operation from shared ring once

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Pau Monné <roger.pau@citrix.com>

commit 1f13d75ccb806260079e0679d55d9253e370ec8a upstream.

A compiler may load a switch statement value multiple times, which could
be bad when the value is in memory shared with the frontend.

When converting a non-native request to a native one, ensure that
src->operation is only loaded once by using READ_ONCE().

This is part of XSA155.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[bwh: Backported to 3.2:
 - s/READ_ONCE/ACCESS_ONCE/
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/block/xen-blkback/common.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -238,11 +238,11 @@ static inline void blkif_get_x86_32_req(
 					struct blkif_x86_32_request *src)
 {
 	int i, n = BLKIF_MAX_SEGMENTS_PER_REQUEST;
-	dst->operation = src->operation;
+	dst->operation = ACCESS_ONCE(src->operation);
 	dst->nr_segments = src->nr_segments;
 	dst->handle = src->handle;
 	dst->id = src->id;
-	switch (src->operation) {
+	switch (dst->operation) {
 	case BLKIF_OP_READ:
 	case BLKIF_OP_WRITE:
 	case BLKIF_OP_WRITE_BARRIER:
@@ -267,11 +267,11 @@ static inline void blkif_get_x86_64_req(
 					struct blkif_x86_64_request *src)
 {
 	int i, n = BLKIF_MAX_SEGMENTS_PER_REQUEST;
-	dst->operation = src->operation;
+	dst->operation = ACCESS_ONCE(src->operation);
 	dst->nr_segments = src->nr_segments;
 	dst->handle = src->handle;
 	dst->id = src->id;
-	switch (src->operation) {
+	switch (dst->operation) {
 	case BLKIF_OP_READ:
 	case BLKIF_OP_WRITE:
 	case BLKIF_OP_WRITE_BARRIER:

[PATCH 3.2 27/70] xen/pciback: Do not install an IRQ handler for MSI interrupts.

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit a396f3a210c3a61e94d6b87ec05a75d0be2a60d0 upstream.

Otherwise an guest can subvert the generic MSI code to trigger
an BUG_ON condition during MSI interrupt freeing:

 for (i = 0; i < entry->nvec_used; i++)
        BUG_ON(irq_has_action(entry->irq + i));

Xen PCI backed installs an IRQ handler (request_irq) for
the dev->irq whenever the guest writes PCI_COMMAND_MEMORY
(or PCI_COMMAND_IO) to the PCI_COMMAND register. This is
done in case the device has legacy interrupts the GSI line
is shared by the backend devices.

To subvert the backend the guest needs to make the backend
to change the dev->irq from the GSI to the MSI interrupt line,
make the backend allocate an interrupt handler, and then command
the backend to free the MSI interrupt and hit the BUG_ON.

Since the backend only calls 'request_irq' when the guest
writes to the PCI_COMMAND register the guest needs to call
XEN_PCI_OP_enable_msi before any other operation. This will
cause the generic MSI code to setup an MSI entry and
populate dev->irq with the new PIRQ value.

Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY
and cause the backend to setup an IRQ handler for dev->irq
(which instead of the GSI value has the MSI pirq). See
'xen_pcibk_control_isr'.

Then the guest disables the MSI: XEN_PCI_OP_disable_msi
which ends up triggering the BUG_ON condition in 'free_msi_irqs'
as there is an IRQ handler for the entry->irq (dev->irq).

Note that this cannot be done using MSI-X as the generic
code does not over-write dev->irq with the MSI-X PIRQ values.

The patch inhibits setting up the IRQ handler if MSI or
MSI-X (for symmetry reasons) code had been called successfully.

P.S.
Xen PCIBack when it sets up the device for the guest consumption
ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device).
XSA-120 addendum patch removed that - however when upstreaming said
addendum we found that it caused issues with qemu upstream. That
has now been fixed in qemu upstream.

This is part of XSA-157

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/xen/xen-pciback/pciback_ops.c | 7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -68,6 +68,13 @@ static void xen_pcibk_control_isr(struct
 		enable ? "enable" : "disable");
 
 	if (enable) {
+		/*
+		 * The MSI or MSI-X should not have an IRQ handler. Otherwise
+		 * if the guest terminates we BUG_ON in free_msi_irqs.
+		 */
+		if (dev->msi_enabled || dev->msix_enabled)
+			goto out;
+
 		rc = request_irq(dev_data->irq,
 				xen_pcibk_guest_interrupt, IRQF_SHARED,
 				dev_data->irq_name, dev);

[PATCH 3.2 63/70] i2c: i801: Add Device IDs for Intel Sunrise Point PCH

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "james.d.ralston@intel.com" <james.d.ralston@intel.com>

commit 3e27a8445c21f8056517f188303827450590d868 upstream.

This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -28,6 +28,7 @@ Supported adapters:
   * Intel Wildcat Point (PCH)
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
+  * Intel Sunrise Point-H (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -111,6 +111,7 @@ config I2C_I801
 	    Wildcat Point (PCH)
 	    Wildcat Point-LP (PCH)
 	    BayTrail (SOC)
+	    Sunrise Point-H (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -62,6 +62,7 @@
  * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
  * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
  * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
+ * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -168,6 +169,7 @@
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -668,6 +670,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 68/70] i2c: i801: add Intel Lewisburg device IDs

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandra Yates <alexandra.yates@linux.intel.com>

commit cdc5a3110e7c3ae793f367285789a6bc39c962dc upstream.

Adding Intel codename Lewisburg platform device IDs for SMBus.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 6 ++++++
 3 files changed, 8 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -32,6 +32,7 @@ Supported adapters:
   * Intel Sunrise Point-LP (PCH)
   * Intel DNV (SOC)
   * Intel Broxton (SOC)
+  * Intel Lewisburg (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -115,6 +115,7 @@ config I2C_I801
 	    Sunrise Point-LP (PCH)
 	    DNV (SOC)
 	    Broxton (SOC)
+	    Lewisburg (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -66,6 +66,8 @@
  * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
  * DNV (SOC)			0x19df	32	hard	yes	yes	yes
  * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
+ * Lewisburg (PCH)		0xa1a3	32	hard	yes	yes	yes
+ * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -176,6 +178,8 @@
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -680,6 +684,8 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 31/70] USB: fix invalid memory access in hub_activate()

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit e50293ef9775c5f1cf3fcc093037dd6a8c5684ea upstream.

Commit 8520f38099cc ("USB: change hub initialization sleeps to
delayed_work") changed the hub_activate() routine to make part of it
run in a workqueue.  However, the commit failed to take a reference to
the usb_hub structure or to lock the hub interface while doing so.  As
a result, if a hub is plugged in and quickly unplugged before the work
routine can run, the routine will try to access memory that has been
deallocated.  Or, if the hub is unplugged while the routine is
running, the memory may be deallocated while it is in active use.

This patch fixes the problem by taking a reference to the usb_hub at
the start of hub_activate() and releasing it at the end (when the work
is finished), and by locking the hub interface while the work routine
is running.  It also adds a check at the start of the routine to see
if the hub has already been disconnected, in which nothing should be
done.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Alexandru Cornea <alexandru.cornea@intel.com>
Tested-by: Alexandru Cornea <alexandru.cornea@intel.com>
Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: add prototype for hub_release() before first use]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -153,7 +153,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rws
 #define HUB_DEBOUNCE_STEP	  25
 #define HUB_DEBOUNCE_STABLE	 100
 
-
+static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
 
 static inline char *portspeed(struct usb_hub *hub, int portstatus)
@@ -792,10 +792,20 @@ static void hub_activate(struct usb_hub
 	unsigned delay;
 
 	/* Continue a partial initialization */
-	if (type == HUB_INIT2)
-		goto init2;
-	if (type == HUB_INIT3)
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		device_lock(hub->intfdev);
+
+		/* Was the hub disconnected while we were waiting? */
+		if (hub->disconnected) {
+			device_unlock(hub->intfdev);
+			kref_put(&hub->kref, hub_release);
+			return;
+		}
+		if (type == HUB_INIT2)
+			goto init2;
 		goto init3;
+	}
+	kref_get(&hub->kref);
 
 	/* The superspeed hub except for root hub has to use Hub Depth
 	 * value as an offset into the route string to locate the bits
@@ -984,6 +994,7 @@ static void hub_activate(struct usb_hub
 			PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func3);
 			schedule_delayed_work(&hub->init_work,
 					msecs_to_jiffies(delay));
+			device_unlock(hub->intfdev);
 			return;		/* Continues at init3: below */
 		} else {
 			msleep(delay);
@@ -1004,6 +1015,11 @@ static void hub_activate(struct usb_hub
 	/* Allow autosuspend if it was suppressed */
 	if (type <= HUB_INIT3)
 		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+
+	if (type == HUB_INIT2 || type == HUB_INIT3)
+		device_unlock(hub->intfdev);
+
+	kref_put(&hub->kref, hub_release);
 }
 
 /* Implement the continuations for the delays above */

[PATCH 3.2 24/70] xen/pciback: Save xen_pci_op commands before processing it

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 8135cf8b092723dbfcc611fe6fdcb3a36c9951c5 upstream.

Double fetch vulnerabilities that happen when a variable is
fetched twice from shared memory but a security check is only
performed the first time.

The xen_pcibk_do_op function performs a switch statements on the op->cmd
value which is stored in shared memory. Interestingly this can result
in a double fetch vulnerability depending on the performed compiler
optimization.

This patch fixes it by saving the xen_pci_op command before
processing it. We also use 'barrier' to make sure that the
compiler does not perform any optimization.

This is part of XSA155.

Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/xen/xen-pciback/pciback.h     |  1 +
 drivers/xen/xen-pciback/pciback_ops.c | 15 ++++++++++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/xen/xen-pciback/pciback.h
+++ b/drivers/xen/xen-pciback/pciback.h
@@ -37,6 +37,7 @@ struct xen_pcibk_device {
 	struct xen_pci_sharedinfo *sh_info;
 	unsigned long flags;
 	struct work_struct op_work;
+	struct xen_pci_op op;
 };
 
 struct xen_pcibk_dev_data {
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -296,9 +296,11 @@ void xen_pcibk_do_op(struct work_struct
 		container_of(data, struct xen_pcibk_device, op_work);
 	struct pci_dev *dev;
 	struct xen_pcibk_dev_data *dev_data = NULL;
-	struct xen_pci_op *op = &pdev->sh_info->op;
+	struct xen_pci_op *op = &pdev->op;
 	int test_intx = 0;
 
+	*op = pdev->sh_info->op;
+	barrier();
 	dev = xen_pcibk_get_pci_dev(pdev, op->domain, op->bus, op->devfn);
 
 	if (dev == NULL)
@@ -340,6 +342,17 @@ void xen_pcibk_do_op(struct work_struct
 		if ((dev_data->enable_intx != test_intx))
 			xen_pcibk_control_isr(dev, 0 /* no reset */);
 	}
+	pdev->sh_info->op.err = op->err;
+	pdev->sh_info->op.value = op->value;
+#ifdef CONFIG_PCI_MSI
+	if (op->cmd == XEN_PCI_OP_enable_msix && op->err == 0) {
+		unsigned int i;
+
+		for (i = 0; i < op->value; i++)
+			pdev->sh_info->op.msix_entries[i].vector =
+				op->msix_entries[i].vector;
+	}
+#endif
 	/* Tell the driver domain that we're done. */
 	wmb();
 	clear_bit(_XEN_PCIF_active, (unsigned long *)&pdev->sh_info->flags);

[PATCH 3.2 28/70] xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 7cfb905b9638982862f0331b36ccaaca5d383b49 upstream.

Otherwise just continue on, returning the same values as
previously (return of 0, and op->result has the PIRQ value).

This does not change the behavior of XEN_PCI_OP_disable_msi[|x].

The pci_disable_msi or pci_disable_msix have the checks for
msi_enabled or msix_enabled so they will error out immediately.

However the guest can still call these operations and cause
us to disable the 'ack_intr'. That means the backend IRQ handler
for the legacy interrupt will not respond to interrupts anymore.

This will lead to (if the device is causing an interrupt storm)
for the Linux generic code to disable the interrupt line.

Naturally this will only happen if the device in question
is plugged in on the motherboard on shared level interrupt GSI.

This is part of XSA-157

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/xen/xen-pciback/pciback_ops.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -183,20 +183,23 @@ static
 int xen_pcibk_disable_msi(struct xen_pcibk_device *pdev,
 			  struct pci_dev *dev, struct xen_pci_op *op)
 {
-	struct xen_pcibk_dev_data *dev_data;
-
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: disable MSI\n",
 		       pci_name(dev));
-	pci_disable_msi(dev);
 
+	if (dev->msi_enabled) {
+		struct xen_pcibk_dev_data *dev_data;
+
+		pci_disable_msi(dev);
+
+		dev_data = pci_get_drvdata(dev);
+		if (dev_data)
+			dev_data->ack_intr = 1;
+	}
 	op->value = dev->irq ? xen_pirq_from_irq(dev->irq) : 0;
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: MSI: %d\n", pci_name(dev),
 			op->value);
-	dev_data = pci_get_drvdata(dev);
-	if (dev_data)
-		dev_data->ack_intr = 1;
 	return 0;
 }
 
@@ -262,23 +265,27 @@ static
 int xen_pcibk_disable_msix(struct xen_pcibk_device *pdev,
 			   struct pci_dev *dev, struct xen_pci_op *op)
 {
-	struct xen_pcibk_dev_data *dev_data;
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: disable MSI-X\n",
 			pci_name(dev));
-	pci_disable_msix(dev);
 
+	if (dev->msix_enabled) {
+		struct xen_pcibk_dev_data *dev_data;
+
+		pci_disable_msix(dev);
+
+		dev_data = pci_get_drvdata(dev);
+		if (dev_data)
+			dev_data->ack_intr = 1;
+	}
 	/*
 	 * SR-IOV devices (which don't have any legacy IRQ) have
 	 * an undefined IRQ value of zero.
 	 */
 	op->value = dev->irq ? xen_pirq_from_irq(dev->irq) : 0;
 	if (unlikely(verbose_request))
-		printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n", pci_name(dev),
-			op->value);
-	dev_data = pci_get_drvdata(dev);
-	if (dev_data)
-		dev_data->ack_intr = 1;
+		printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n",
+		       pci_name(dev), op->value);
 	return 0;
 }
 #endif

[PATCH 3.2 25/70] xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 56441f3c8e5bd45aab10dd9f8c505dd4bec03b0d upstream.

The guest sequence of:

 a) XEN_PCI_OP_enable_msi
 b) XEN_PCI_OP_enable_msi
 c) XEN_PCI_OP_disable_msi

results in hitting an BUG_ON condition in the msi.c code.

The MSI code uses an dev->msi_list to which it adds MSI entries.
Under the above conditions an BUG_ON() can be hit. The device
passed in the guest MUST have MSI capability.

The a) adds the entry to the dev->msi_list and sets msi_enabled.
The b) adds a second entry but adding in to SysFS fails (duplicate entry)
and deletes all of the entries from msi_list and returns (with msi_enabled
is still set).  c) pci_disable_msi passes the msi_enabled checks and hits:

BUG_ON(list_empty(dev_to_msi_list(&dev->dev)));

and blows up.

The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard
against that. The check for msix_enabled is not stricly neccessary.

This is part of XSA-157.

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/xen/xen-pciback/pciback_ops.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -142,7 +142,12 @@ int xen_pcibk_enable_msi(struct xen_pcib
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: enable MSI\n", pci_name(dev));
 
-	status = pci_enable_msi(dev);
+	if (dev->msi_enabled)
+		status = -EALREADY;
+	else if (dev->msix_enabled)
+		status = -ENXIO;
+	else
+		status = pci_enable_msi(dev);
 
 	if (status) {
 		pr_warn_ratelimited(DRV_NAME ": %s: error enabling MSI for guest %u: err %d\n",

[PATCH 3.2 26/70] xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 5e0ce1455c09dd61d029b8ad45d82e1ac0b6c4c9 upstream.

The guest sequence of:

  a) XEN_PCI_OP_enable_msix
  b) XEN_PCI_OP_enable_msix

results in hitting an NULL pointer due to using freed pointers.

The device passed in the guest MUST have MSI-X capability.

The a) constructs and SysFS representation of MSI and MSI groups.
The b) adds a second set of them but adding in to SysFS fails (duplicate entry).
'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that
in a) pdev->msi_irq_groups is still set) and also free's ALL of the
MSI-X entries of the device (the ones allocated in step a) and b)).

The unwind code: 'free_msi_irqs' deletes all the entries and tries to
delete the pdev->msi_irq_groups (which hasn't been set to NULL).
However the pointers in the SysFS are already freed and we hit an
NULL pointer further on when 'strlen' is attempted on a freed pointer.

The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard
against that. The check for msi_enabled is not stricly neccessary.

This is part of XSA-157

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/xen/xen-pciback/pciback_ops.c | 7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -204,9 +204,16 @@ int xen_pcibk_enable_msix(struct xen_pci
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: enable MSI-X\n",
 		       pci_name(dev));
+
 	if (op->value > SH_INFO_MAX_VEC)
 		return -EINVAL;
 
+	if (dev->msix_enabled)
+		return -EALREADY;
+
+	if (dev->msi_enabled)
+		return -ENXIO;
+
 	entries = kmalloc(op->value * sizeof(*entries), GFP_KERNEL);
 	if (entries == NULL)
 		return -ENOMEM;

[PATCH 3.2 21/70] xen-netback: don't use last request to determine minimum Tx credit

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: David Vrabel <david.vrabel@citrix.com>

commit 0f589967a73f1f30ab4ac4dd9ce0bb399b4d6357 upstream.

The last from guest transmitted request gives no indication about the
minimum amount of credit that the guest might need to send a packet
since the last packet might have been a small one.

Instead allow for the worst case 128 KiB packet.

This is part of XSA155.

CC: stable@vger.kernel.org
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[bwh: Backported to 3.2: s/queue/vif/g]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/xen-netback/netback.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -864,9 +864,7 @@ static void tx_add_credit(struct xenvif
 	 * Allow a burst big enough to transmit a jumbo packet of up to 128kB.
 	 * Otherwise the interface can seize up due to insufficient credit.
 	 */
-	max_burst = RING_GET_REQUEST(&vif->tx, vif->tx.req_cons)->size;
-	max_burst = min(max_burst, 131072UL);
-	max_burst = max(max_burst, vif->credit_bytes);
+	max_burst = max(131072UL, vif->credit_bytes);
 
 	/* Take care that adding a new chunk of credit doesn't wrap to zero. */
 	max_credit = vif->remaining_credit + vif->credit_bytes;

[PATCH 3.2 53/70] ahci: Add Device ID for Intel Sunrise Point PCH

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "Charles_Rose@Dell.com" <Charles_Rose@Dell.com>

commit c5967b79ecabe2baca40658d9073e28b30d7f6cf upstream.

This patch adds missing AHCI RAID SATA Device IDs for the Intel Sunrise
Point PCH.

Signed-off-by: Nanda Kishore Chinna <nanda_kishore_chinna@dell.com>
Signed-off-by: Charles Rose <charles_rose@dell.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c | 2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -360,8 +360,10 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */
 	{ PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0xa102), board_ahci }, /* Sunrise Point-H AHCI */
 	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
 	{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
+	{ PCI_VDEVICE(INTEL, 0xa106), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
 

[PATCH 3.2 34/70] ipv6/addrlabel: fix ip6addrlbl_get()

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Andrey Ryabinin <aryabinin@virtuozzo.com>

commit e459dfeeb64008b2d23bdf600f03b3605dbb8152 upstream.

ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded,
ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed,
ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer.

Fix this by inverting ip6addrlbl_hold() check.

Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Cong Wang <cwang@twopensource.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/ipv6/addrlabel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv6/addrlabel.c
+++ b/net/ipv6/addrlabel.c
@@ -558,7 +558,7 @@ static int ip6addrlbl_get(struct sk_buff
 
 	rcu_read_lock();
 	p = __ipv6_addr_label(net, addr, ipv6_addr_type(addr), ifal->ifal_index);
-	if (p && ip6addrlbl_hold(p))
+	if (p && !ip6addrlbl_hold(p))
 		p = NULL;
 	lseq = ip6addrlbl_table.seq;
 	rcu_read_unlock();

[PATCH 3.2 29/70] xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 408fb0e5aa7fda0059db282ff58c3b2a4278baa0 upstream.

commit f598282f51 ("PCI: Fix the NIU MSI-X problem in a better way")
teaches us that dealing with MSI-X can be troublesome.

Further checks in the MSI-X architecture shows that if the
PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we
may not be able to access the BAR (since they are memory regions).

Since the MSI-X tables are located in there.. that can lead
to us causing PCIe errors. Inhibit us performing any
operation on the MSI-X unless the MEMORY bit is set.

Note that Xen hypervisor with:
"x86/MSI-X: access MSI-X table only after having enabled MSI-X"
will return:
xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3!

When the generic MSI code tries to setup the PIRQ without
MEMORY bit set. Which means with later versions of Xen
(4.6) this patch is not neccessary.

This is part of XSA-157

Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/xen/xen-pciback/pciback_ops.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -210,6 +210,7 @@ int xen_pcibk_enable_msix(struct xen_pci
 	struct xen_pcibk_dev_data *dev_data;
 	int i, result;
 	struct msix_entry *entries;
+	u16 cmd;
 
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: enable MSI-X\n",
@@ -221,7 +222,12 @@ int xen_pcibk_enable_msix(struct xen_pci
 	if (dev->msix_enabled)
 		return -EALREADY;
 
-	if (dev->msi_enabled)
+	/*
+	 * PCI_COMMAND_MEMORY must be enabled, otherwise we may not be able
+	 * to access the BARs where the MSI-X entries reside.
+	 */
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	if (dev->msi_enabled || !(cmd & PCI_COMMAND_MEMORY))
 		return -ENXIO;
 
 	entries = kmalloc(op->value * sizeof(*entries), GFP_KERNEL);

[PATCH 3.2 37/70] MIPS: Fix restart of indirect syscalls

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Ed Swierk <eswierk@skyportsystems.com>

commit e967ef022e00bb7c2e5b1a42007abfdd52055050 upstream.

When 32-bit MIPS userspace invokes a syscall indirectly via syscall(number,
arg1, ..., arg7), the kernel looks up the actual syscall based on the given
number, shifts the other arguments to the left, and jumps to the syscall.

If the syscall is interrupted by a signal and indicates it needs to be
restarted by the kernel (by returning ERESTARTNOINTR for example), the
syscall must be called directly, since the number is no longer the first
argument, and the other arguments are now staged for a direct call.

Before shifting the arguments, store the syscall number in pt_regs->regs[2].
This gets copied temporarily into pt_regs->regs[0] after the syscall returns.
If the syscall needs to be restarted, handle_signal()/do_signal() copies the
number back to pt_regs->reg[2], which ends up in $v0 once control returns to
userspace.

Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8929/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/mips/kernel/scall32-o32.S | 1 +
 arch/mips/kernel/scall64-o32.S | 1 +
 2 files changed, 2 insertions(+)

--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -192,6 +192,7 @@ illegal_syscall:
 	sll	t1, t0, 3
 	beqz	v0, einval
 	lw	t2, sys_call_table(t1)		# syscall routine
+	sw	a0, PT_R2(sp)			# call routine directly on restart
 
 	/* Some syscalls like execve get their arguments from struct pt_regs
 	   and claim zero arguments in the syscall table. Thus we have to
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -180,6 +180,7 @@ LEAF(sys32_syscall)
 	dsll	t1, t0, 3
 	beqz	v0, einval
 	ld	t2, sys_call_table(t1)		# syscall routine
+	sd	a0, PT_R2(sp)		# call routine directly on restart
 
 	move	a0, a1			# shift argument registers
 	move	a1, a2

[PATCH 3.2 60/70] i2c: i801: Fix the alignment of the device table

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jean Delvare <jdelvare@suse.de>

commit ce3161106ab57afbfbe1c33d95bf4a569405983a upstream.

A long name broke the alignment, shift the columns a bit to fix it and
make the table look nice again. While we're here, switch to the
standard comment style to make checkpatch happy, and use tabs instead
of spaces for column alignment.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
[bwh: Backported to 3.2: "Interrupt processing" isn't mentioned]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/i2c/busses/i2c-i801.c | 136 +++++++++++++++++++++---------------------
 1 file changed, 68 insertions(+), 68 deletions(-)

--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -22,56 +22,56 @@
 */
 
 /*
-  Supports the following Intel I/O Controller Hubs (ICH):
-
-                                  I/O                     Block   I2C
-                                  region  SMBus   Block   proc.   block
-  Chip name             PCI ID    size    PEC     buffer  call    read
-  ----------------------------------------------------------------------
-  82801AA  (ICH)        0x2413     16      no      no      no      no
-  82801AB  (ICH0)       0x2423     16      no      no      no      no
-  82801BA  (ICH2)       0x2443     16      no      no      no      no
-  82801CA  (ICH3)       0x2483     32     soft     no      no      no
-  82801DB  (ICH4)       0x24c3     32     hard     yes     no      no
-  82801E   (ICH5)       0x24d3     32     hard     yes     yes     yes
-  6300ESB               0x25a4     32     hard     yes     yes     yes
-  82801F   (ICH6)       0x266a     32     hard     yes     yes     yes
-  6310ESB/6320ESB       0x269b     32     hard     yes     yes     yes
-  82801G   (ICH7)       0x27da     32     hard     yes     yes     yes
-  82801H   (ICH8)       0x283e     32     hard     yes     yes     yes
-  82801I   (ICH9)       0x2930     32     hard     yes     yes     yes
-  EP80579 (Tolapai)     0x5032     32     hard     yes     yes     yes
-  ICH10                 0x3a30     32     hard     yes     yes     yes
-  ICH10                 0x3a60     32     hard     yes     yes     yes
-  5/3400 Series (PCH)   0x3b30     32     hard     yes     yes     yes
-  6 Series (PCH)        0x1c22     32     hard     yes     yes     yes
-  Patsburg (PCH)        0x1d22     32     hard     yes     yes     yes
-  Patsburg (PCH) IDF    0x1d70     32     hard     yes     yes     yes
-  Patsburg (PCH) IDF    0x1d71     32     hard     yes     yes     yes
-  Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
-  DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
-  Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
-  Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
-  Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
-  Avoton (SOC)          0x1f3c     32     hard     yes     yes     yes
-  Wellsburg (PCH)       0x8d22     32     hard     yes     yes     yes
-  Wellsburg (PCH) MS    0x8d7d     32     hard     yes     yes     yes
-  Wellsburg (PCH) MS    0x8d7e     32     hard     yes     yes     yes
-  Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
-  Coleto Creek (PCH)    0x23b0     32     hard     yes     yes     yes
-  Wildcat Point-LP (PCH)   0x9ca2     32     hard     yes     yes     yes
-  BayTrail (SOC)        0x0f12     32     hard     yes     yes     yes
-
-  Features supported by this driver:
-  Software PEC                     no
-  Hardware PEC                     yes
-  Block buffer                     yes
-  Block process call transaction   no
-  I2C block read transaction       yes  (doesn't use the block buffer)
-  Slave mode                       no
-
-  See the file Documentation/i2c/busses/i2c-i801 for details.
-*/
+ * Supports the following Intel I/O Controller Hubs (ICH):
+ *
+ *					I/O			Block	I2C
+ *					region	SMBus	Block	proc.	block
+ * Chip name			PCI ID	size	PEC	buffer	call	read
+ * ---------------------------------------------------------------------------
+ * 82801AA (ICH)		0x2413	16	no	no	no	no
+ * 82801AB (ICH0)		0x2423	16	no	no	no	no
+ * 82801BA (ICH2)		0x2443	16	no	no	no	no
+ * 82801CA (ICH3)		0x2483	32	soft	no	no	no
+ * 82801DB (ICH4)		0x24c3	32	hard	yes	no	no
+ * 82801E (ICH5)		0x24d3	32	hard	yes	yes	yes
+ * 6300ESB			0x25a4	32	hard	yes	yes	yes
+ * 82801F (ICH6)		0x266a	32	hard	yes	yes	yes
+ * 6310ESB/6320ESB		0x269b	32	hard	yes	yes	yes
+ * 82801G (ICH7)		0x27da	32	hard	yes	yes	yes
+ * 82801H (ICH8)		0x283e	32	hard	yes	yes	yes
+ * 82801I (ICH9)		0x2930	32	hard	yes	yes	yes
+ * EP80579 (Tolapai)		0x5032	32	hard	yes	yes	yes
+ * ICH10			0x3a30	32	hard	yes	yes	yes
+ * ICH10			0x3a60	32	hard	yes	yes	yes
+ * 5/3400 Series (PCH)		0x3b30	32	hard	yes	yes	yes
+ * 6 Series (PCH)		0x1c22	32	hard	yes	yes	yes
+ * Patsburg (PCH)		0x1d22	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d70	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d71	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d72	32	hard	yes	yes	yes
+ * DH89xxCC (PCH)		0x2330	32	hard	yes	yes	yes
+ * Panther Point (PCH)		0x1e22	32	hard	yes	yes	yes
+ * Lynx Point (PCH)		0x8c22	32	hard	yes	yes	yes
+ * Lynx Point-LP (PCH)		0x9c22	32	hard	yes	yes	yes
+ * Avoton (SOC)			0x1f3c	32	hard	yes	yes	yes
+ * Wellsburg (PCH)		0x8d22	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7d	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7e	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7f	32	hard	yes	yes	yes
+ * Coleto Creek (PCH)		0x23b0	32	hard	yes	yes	yes
+ * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
+ * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
+ *
+ * Features supported by this driver:
+ * Software PEC				no
+ * Hardware PEC				yes
+ * Block buffer				yes
+ * Block process call transaction	no
+ * I2C block read transaction		yes (doesn't use the block buffer)
+ * Slave mode				no
+ *
+ * See the file Documentation/i2c/busses/i2c-i801 for details.
+ */
 
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -146,24 +146,24 @@
 				 SMBHSTSTS_INTR)
 
 /* Older devices have their ID defined in <linux/pci_ids.h> */
-#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS	0x0f12
-#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS		0x0f12
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS		0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS		0x1d22
 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0	0x1d70
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1	0x1d71
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2	0x1d72
-#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
-#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS	0x1f3c
-#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
-#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS	0x23b0
-#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
-#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
-#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS	0x8d22
-#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0	0x8d7d
-#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1	0x8d7e
-#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2	0x8d7f
-#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0		0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1		0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2		0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS		0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS		0x1f3c
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS		0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS		0x23b0
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS		0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS		0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0		0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1		0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
 
 struct i801_priv {

[PATCH 3.2 33/70] parisc: Fix syscall restarts

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit 71a71fb5374a23be36a91981b5614590b9e722c3 upstream.

On parisc syscalls which are interrupted by signals sometimes failed to
restart and instead returned -ENOSYS which in the worst case lead to
userspace crashes.
A similiar problem existed on MIPS and was fixed by commit e967ef02
("MIPS: Fix restart of indirect syscalls").

On parisc the current syscall restart code assumes that all syscall
callers load the syscall number in the delay slot of the ble
instruction. That's how it is e.g. done in the unistd.h header file:
	ble 0x100(%sr2, %r0)
	ldi #syscall_nr, %r20
Because of that assumption the current code never restored %r20 before
returning to userspace.

This assumption is at least not true for code which uses the glibc
syscall() function, which instead uses this syntax:
	ble 0x100(%sr2, %r0)
	copy regX, %r20
where regX depend on how the compiler optimizes the code and register
usage.

This patch fixes this problem by adding code to analyze how the syscall
number is loaded in the delay branch and - if needed - copy the syscall
number to regX prior returning to userspace for the syscall restart.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/parisc/kernel/signal.c | 64 ++++++++++++++++++++++++++++++++++++---------
 1 file changed, 52 insertions(+), 12 deletions(-)

--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -468,6 +468,55 @@ handle_signal(unsigned long sig, siginfo
 	return 1;
 }
 
+/*
+ * Check how the syscall number gets loaded into %r20 within
+ * the delay branch in userspace and adjust as needed.
+ */
+
+static void check_syscallno_in_delay_branch(struct pt_regs *regs)
+{
+	u32 opcode, source_reg;
+	u32 __user *uaddr;
+	int err;
+
+	/* Usually we don't have to restore %r20 (the system call number)
+	 * because it gets loaded in the delay slot of the branch external
+	 * instruction via the ldi instruction.
+	 * In some cases a register-to-register copy instruction might have
+	 * been used instead, in which case we need to copy the syscall
+	 * number into the source register before returning to userspace.
+	 */
+
+	/* A syscall is just a branch, so all we have to do is fiddle the
+	 * return pointer so that the ble instruction gets executed again.
+	 */
+	regs->gr[31] -= 8; /* delayed branching */
+
+	/* Get assembler opcode of code in delay branch */
+	uaddr = (unsigned int *) ((regs->gr[31] & ~3) + 4);
+	err = get_user(opcode, uaddr);
+	if (err)
+		return;
+
+	/* Check if delay branch uses "ldi int,%r20" */
+	if ((opcode & 0xffff0000) == 0x34140000)
+		return;	/* everything ok, just return */
+
+	/* Check if delay branch uses "nop" */
+	if (opcode == INSN_NOP)
+		return;
+
+	/* Check if delay branch uses "copy %rX,%r20" */
+	if ((opcode & 0xffe0ffff) == 0x08000254) {
+		source_reg = (opcode >> 16) & 31;
+		regs->gr[source_reg] = regs->gr[20];
+		return;
+	}
+
+	pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n",
+		current->comm, task_pid_nr(current), opcode);
+}
+
 static inline void
 syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 {
@@ -489,10 +538,7 @@ syscall_restart(struct pt_regs *regs, st
 		}
 		/* fallthrough */
 	case -ERESTARTNOINTR:
-		/* A syscall is just a branch, so all
-		 * we have to do is fiddle the return pointer.
-		 */
-		regs->gr[31] -= 8; /* delayed branching */
+		check_syscallno_in_delay_branch(regs);
 		/* Preserve original r28. */
 		regs->gr[28] = regs->orig_r28;
 		break;
@@ -543,18 +589,12 @@ insert_restart_trampoline(struct pt_regs
 	}
 	case -ERESTARTNOHAND:
 	case -ERESTARTSYS:
-	case -ERESTARTNOINTR: {
-		/* Hooray for delayed branching.  We don't
-		 * have to restore %r20 (the system call
-		 * number) because it gets loaded in the delay
-		 * slot of the branch external instruction.
-		 */
-		regs->gr[31] -= 8;
+	case -ERESTARTNOINTR:
+		check_syscallno_in_delay_branch(regs);
 		/* Preserve original r28. */
 		regs->gr[28] = regs->orig_r28;
 
 		return;
-	}
 	default:
 		break;
 	}

[PATCH 3.2 14/70] ser_gigaset: fix deallocation of platform device structure

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Tilman Schmidt <tilman@imap.cc>

commit 4c5e354a974214dfb44cd23fa0429327693bc3ea upstream.

When shutting down the device, the struct ser_cardstate must not be
kfree()d immediately after the call to platform_device_unregister()
since the embedded struct platform_device is still in use.
Move the kfree() call to the release method instead.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Fixes: 2869b23e4b95 ("drivers/isdn/gigaset: new M101 driver (v2)")
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/isdn/gigaset/ser-gigaset.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -371,19 +371,23 @@ static void gigaset_freecshw(struct card
 	tasklet_kill(&cs->write_tasklet);
 	if (!cs->hw.ser)
 		return;
-	dev_set_drvdata(&cs->hw.ser->dev.dev, NULL);
 	platform_device_unregister(&cs->hw.ser->dev);
-	kfree(cs->hw.ser);
-	cs->hw.ser = NULL;
 }
 
 static void gigaset_device_release(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct cardstate *cs = dev_get_drvdata(dev);
 
 	/* adapted from platform_device_release() in drivers/base/platform.c */
 	kfree(dev->platform_data);
 	kfree(pdev->resource);
+
+	if (!cs)
+		return;
+	dev_set_drvdata(dev, NULL);
+	kfree(cs->hw.ser);
+	cs->hw.ser = NULL;
 }
 
 /*

[PATCH 3.2 43/70] KVM: x86: Reload pit counters for all channels when restoring state

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Honig <ahonig@google.com>

commit 0185604c2d82c560dab2f2933a18f797e74ab5a8 upstream.

Currently if userspace restores the pit counters with a count of 0
on channels 1 or 2 and the guest attempts to read the count on those
channels, then KVM will perform a mod of 0 and crash.  This will ensure
that 0 values are converted to 65536 as per the spec.

This is CVE-2015-7513.

Signed-off-by: Andy Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/kvm/x86.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3434,10 +3434,11 @@ static int kvm_vm_ioctl_get_pit(struct k
 static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 {
 	int r = 0;
-
+	int i;
 	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state));
-	kvm_pit_load_count(kvm, 0, ps->channels[0].count, 0);
+	for (i = 0; i < 3; i++)
+		kvm_pit_load_count(kvm, i, ps->channels[i].count, 0);
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
@@ -3458,6 +3459,7 @@ static int kvm_vm_ioctl_get_pit2(struct
 static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
 {
 	int r = 0, start = 0;
+	int i;
 	u32 prev_legacy, cur_legacy;
 	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	prev_legacy = kvm->arch.vpit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY;
@@ -3467,7 +3469,8 @@ static int kvm_vm_ioctl_set_pit2(struct
 	memcpy(&kvm->arch.vpit->pit_state.channels, &ps->channels,
 	       sizeof(kvm->arch.vpit->pit_state.channels));
 	kvm->arch.vpit->pit_state.flags = ps->flags;
-	kvm_pit_load_count(kvm, 0, kvm->arch.vpit->pit_state.channels[0].count, start);
+	for (i = 0; i < 3; i++)
+		kvm_pit_load_count(kvm, i, kvm->arch.vpit->pit_state.channels[i].count, start);
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }

[PATCH 3.2 41/70] ftrace/scripts: Fix incorrect use of sprintf in recordmcount

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit 713a3e4de707fab49d5aa4bceb77db1058572a7b upstream.

Fix build warning:

scripts/recordmcount.c:589:4: warning: format not a string
literal and no format arguments [-Wformat-security]
    sprintf("%s: failed\n", file);

Fixes: a50bd43935586 ("ftrace/scripts: Have recordmcount copy the object file")
Link: http://lkml.kernel.org/r/1451516801-16951-1-git-send-email-colin.king@canonical.com

Cc: Li Bin <huawei.libin@huawei.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 scripts/recordmcount.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -546,7 +546,7 @@ main(int argc, char *argv[])
 			do_file(file);
 			break;
 		case SJ_FAIL:    /* error in do_file or below */
-			sprintf("%s: failed\n", file);
+			fprintf(stderr, "%s: failed\n", file);
 			++n_error;
 			break;
 		case SJ_SUCCEED:    /* premature success */

[PATCH 3.2 61/70] i2c: i801: Add device ID for Intel Wildcat Point PCH

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jean Delvare <jdelvare@suse.de>

commit b299de839157852c563b9f133c8b7e630545a9c3 upstream.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -25,6 +25,7 @@ Supported adapters:
   * Intel Avoton (SOC)
   * Intel Wellsburg (PCH)
   * Intel Coleto Creek (PCH)
+  * Intel Wildcat Point (PCH)
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
    Datasheets: Publicly available at the Intel website
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -108,6 +108,7 @@ config I2C_I801
 	    Avoton (SOC)
 	    Wellsburg (PCH)
 	    Coleto Creek (PCH)
+	    Wildcat Point (PCH)
 	    Wildcat Point-LP (PCH)
 	    BayTrail (SOC)
 
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -59,6 +59,7 @@
  * Wellsburg (PCH) MS		0x8d7e	32	hard	yes	yes	yes
  * Wellsburg (PCH) MS		0x8d7f	32	hard	yes	yes	yes
  * Coleto Creek (PCH)		0x23b0	32	hard	yes	yes	yes
+ * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
  * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
  * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
  *
@@ -159,6 +160,7 @@
 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS		0x23b0
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS		0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS		0x8d22
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0		0x8d7d
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1		0x8d7e
@@ -661,6 +663,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ 0, }

[PATCH 3.2 57/70] i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit f39901c1befa556bc91902516a3e2e460000b4a8 upstream.

This patch adds the i801 SMBus Controller DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -24,6 +24,7 @@ Supported adapters:
   * Intel Lynx Point-LP (PCH)
   * Intel Avoton (SOC)
   * Intel Wellsburg (PCH)
+  * Intel Coleto Creek (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -107,6 +107,7 @@ config I2C_I801
 	    Lynx Point-LP (PCH)
 	    Avoton (SOC)
 	    Wellsburg (PCH)
+	    Coleto Creek (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -58,6 +58,7 @@
   Wellsburg (PCH) MS    0x8d7d     32     hard     yes     yes     yes
   Wellsburg (PCH) MS    0x8d7e     32     hard     yes     yes     yes
   Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
+  Coleto Creek (PCH)    0x23b0     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -152,6 +153,7 @@
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS	0x1f3c
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS	0x23b0
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS	0x8d22
@@ -654,6 +656,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 42/70] net: possible use after free in dst_release

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Francesco Ruggeri <fruggeri@aristanetworks.com>

commit 07a5d38453599052aff0877b16bb9c1585f08609 upstream.

dst_release should not access dst->flags after decrementing
__refcnt to 0. The dst_entry may be in dst_busy_list and
dst_gc_task may dst_destroy it before dst_release gets a chance
to access dst->flags.

Fixes: d69bbf88c8d0 ("net: fix a race in dst_release()")
Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/core/dst.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -269,10 +269,11 @@ void dst_release(struct dst_entry *dst)
 {
 	if (dst) {
 		int newrefcnt;
+		unsigned short nocache = dst->flags & DST_NOCACHE;
 
 		newrefcnt = atomic_dec_return(&dst->__refcnt);
 		WARN_ON(newrefcnt < 0);
-		if (!newrefcnt && unlikely(dst->flags & DST_NOCACHE)) {
+		if (!newrefcnt && unlikely(nocache)) {
 			dst = dst_destroy(dst);
 			if (dst)
 				__dst_free(dst);

[PATCH 3.2 51/70] ahci: Add Marvell 88se91a2 device id

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Thumshirn <jthumshirn@suse.de>

commit a40cf3f38881ce8543ceb9667150b4f2ead4c437 upstream.

Add device id for Marvell 88se91a2

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c | 2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -498,6 +498,8 @@ static const struct pci_device_id ahci_p
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 on some Gigabyte */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0),
 	  .driver_data = board_ahci_yes_fbs },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a2), 	/* 88se91a2 */
+	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),

[PATCH 3.2 36/70] mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone()

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Banman <abanman@sgi.com>

commit 5f0f2887f4de9508dcf438deab28f1de8070c271 upstream.

test_pages_in_a_zone() does not account for the possibility of missing
sections in the given pfn range.  pfn_valid_within always returns 1 when
CONFIG_HOLES_IN_ZONE is not set, allowing invalid pfns from missing
sections to pass the test, leading to a kernel oops.

Wrap an additional pfn loop with PAGES_PER_SECTION granularity to check
for missing sections before proceeding into the zone-check code.

This also prevents a crash from offlining memory devices with missing
sections.  Despite this, it may be a good idea to keep the related patch
'[PATCH 3/3] drivers: memory: prohibit offlining of memory blocks with
missing sections' because missing sections in a memory block may lead to
other problems not covered by the scope of this fix.

Signed-off-by: Andrew Banman <abanman@sgi.com>
Acked-by: Alex Thorlton <athorlton@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 mm/memory_hotplug.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -716,23 +716,30 @@ int is_mem_section_removable(unsigned lo
  */
 static int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long pfn;
+	unsigned long pfn, sec_end_pfn;
 	struct zone *zone = NULL;
 	struct page *page;
 	int i;
-	for (pfn = start_pfn;
+	for (pfn = start_pfn, sec_end_pfn = SECTION_ALIGN_UP(start_pfn);
 	     pfn < end_pfn;
-	     pfn += MAX_ORDER_NR_PAGES) {
-		i = 0;
-		/* This is just a CONFIG_HOLES_IN_ZONE check.*/
-		while ((i < MAX_ORDER_NR_PAGES) && !pfn_valid_within(pfn + i))
-			i++;
-		if (i == MAX_ORDER_NR_PAGES)
+	     pfn = sec_end_pfn + 1, sec_end_pfn += PAGES_PER_SECTION) {
+		/* Make sure the memory section is present first */
+		if (!present_section_nr(pfn_to_section_nr(pfn)))
 			continue;
-		page = pfn_to_page(pfn + i);
-		if (zone && page_zone(page) != zone)
-			return 0;
-		zone = page_zone(page);
+		for (; pfn < sec_end_pfn && pfn < end_pfn;
+		     pfn += MAX_ORDER_NR_PAGES) {
+			i = 0;
+			/* This is just a CONFIG_HOLES_IN_ZONE check.*/
+			while ((i < MAX_ORDER_NR_PAGES) &&
+				!pfn_valid_within(pfn + i))
+				i++;
+			if (i == MAX_ORDER_NR_PAGES)
+				continue;
+			page = pfn_to_page(pfn + i);
+			if (zone && page_zone(page) != zone)
+				return 0;
+			zone = page_zone(page);
+		}
 	}
 	return 1;
 }

[PATCH 3.2 55/70] i2c: i801: SMBus patch for Intel Avoton DeviceIDs

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit c2db409cbc8751ccc7e6d2cc2e41af0d12ea637f upstream.

This patch adds the PCU SMBus DeviceID for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -22,6 +22,7 @@ Supported adapters:
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
   * Intel Lynx Point-LP (PCH)
+  * Intel Avoton (SOC)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -105,6 +105,7 @@ config I2C_I801
 	    Panther Point (PCH)
 	    Lynx Point (PCH)
 	    Lynx Point-LP (PCH)
+	    Avoton (SOC)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -53,6 +53,7 @@
   Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
   Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
   Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
+  Avoton (SOC)          0x1f3c     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -145,6 +146,7 @@
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1	0x1d71
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2	0x1d72
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS	0x1f3c
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
@@ -639,6 +641,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 40/70] genirq: Prevent chip buslock deadlock

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit abc7e40c81d113ef4bacb556f0a77ca63ac81d85 upstream.

If a interrupt chip utilizes chip->buslock then free_irq() can
deadlock in the following way:

CPU0				CPU1
				interrupt(X) (Shared or spurious)
free_irq(X)			interrupt_thread(X)
chip_bus_lock(X)
				   irq_finalize_oneshot(X)
				     chip_bus_lock(X)
synchronize_irq(X)

synchronize_irq() waits for the interrupt thread to complete,
i.e. forever.

Solution is simple: Drop chip_bus_lock() before calling
synchronize_irq() as we do with the irq_desc lock. There is nothing to
be protected after the point where irq_desc lock has been released.

This adds chip_bus_lock/unlock() to the remove_irq() code path, but
that's actually correct in the case where remove_irq() is called on
such an interrupt. The current users of remove_irq() are not affected
as none of those interrupts is on a chip which requires buslock.

Reported-by: Fredrik Markström <fredrik.markstrom@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/irq/manage.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1200,6 +1200,7 @@ static struct irqaction *__free_irq(unsi
 	if (!desc)
 		return NULL;
 
+	chip_bus_lock(desc);
 	raw_spin_lock_irqsave(&desc->lock, flags);
 
 	/*
@@ -1213,7 +1214,7 @@ static struct irqaction *__free_irq(unsi
 		if (!action) {
 			WARN(1, "Trying to free already-free IRQ %d\n", irq);
 			raw_spin_unlock_irqrestore(&desc->lock, flags);
-
+			chip_bus_sync_unlock(desc);
 			return NULL;
 		}
 
@@ -1242,6 +1243,7 @@ static struct irqaction *__free_irq(unsi
 #endif
 
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
+	chip_bus_sync_unlock(desc);
 
 	unregister_handler_proc(irq, action);
 
@@ -1316,9 +1318,7 @@ void free_irq(unsigned int irq, void *de
 		desc->affinity_notify = NULL;
 #endif
 
-	chip_bus_lock(desc);
 	kfree(__free_irq(irq, dev_id));
-	chip_bus_sync_unlock(desc);
 }
 EXPORT_SYMBOL(free_irq);
 

[PATCH 3.2 59/70] i2c: i801: enable Intel BayTrail SMBUS

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "Chew, Kean ho" <kean.ho.chew@intel.com>

commit 1b31e9b76ef8c62291e698dfdb973499986a7f68 upstream.

Add Device ID of Intel BayTrail SMBus Controller.

Signed-off-by: Chew, Kean ho <kean.ho.chew@intel.com>
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -26,6 +26,7 @@ Supported adapters:
   * Intel Wellsburg (PCH)
   * Intel Coleto Creek (PCH)
   * Intel Wildcat Point-LP (PCH)
+  * Intel BayTrail (SOC)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -109,6 +109,7 @@ config I2C_I801
 	    Wellsburg (PCH)
 	    Coleto Creek (PCH)
 	    Wildcat Point-LP (PCH)
+	    BayTrail (SOC)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -60,6 +60,7 @@
   Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
   Coleto Creek (PCH)    0x23b0     32     hard     yes     yes     yes
   Wildcat Point-LP (PCH)   0x9ca2     32     hard     yes     yes     yes
+  BayTrail (SOC)        0x0f12     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -145,6 +146,7 @@
 				 SMBHSTSTS_INTR)
 
 /* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS	0x0f12
 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -660,6 +662,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 64/70] i2c: i801: Add DeviceIDs for SunrisePoint LP

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Devin Ryles <devin.ryles@intel.com>

commit 3eee1799aed90e990e02a73a89bfcff1982c74dd upstream.

Signed-off-by: Devin Ryles <devin.ryles@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -29,6 +29,7 @@ Supported adapters:
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
   * Intel Sunrise Point-H (PCH)
+  * Intel Sunrise Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -112,6 +112,7 @@ config I2C_I801
 	    Wildcat Point-LP (PCH)
 	    BayTrail (SOC)
 	    Sunrise Point-H (PCH)
+	    Sunrise Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -63,6 +63,7 @@
  * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
  * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
  * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
+ * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -170,6 +171,7 @@
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -671,6 +673,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 39/70] net/core: revert "net: fix __netdev_update_features return.." and add comment

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

commit 17b85d29e82cc3c874a497a8bc5764d6a2b043e2 upstream.

This reverts commit 00ee59271777 ("net: fix __netdev_update_features return
on ndo_set_features failure")
and adds a comment explaining why it's okay to return a value other than
0 upon error. Some drivers might actually change flags and return an
error so it's better to fire a spurious notification rather than miss
these.

CC: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/core/dev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5446,7 +5446,10 @@ int __netdev_update_features(struct net_
 		netdev_err(dev,
 			"set_features() failed (%d); wanted 0x%08x, left 0x%08x\n",
 			err, features, dev->features);
-		return 0;
+		/* return non-0 since some features might have changed and
+		 * it's better to fire a spurious notification than miss it
+		 */
+		return -1;
 	}
 
 	if (!err)

[PATCH 3.2 03/70] video: fbdev: fsl: Fix kernel crash when diu_ops is not implemented

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Wang Dongsheng <dongsheng.wang@freescale.com>

commit acfc1cc13fe5bc6d7a10afa624f1e560850ddad3 upstream.

If diu_ops is not implemented on platform, kernel will access a NULL
pointer. We need to check this pointer in DIU initialization.

Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/video/fbdev/fsl-diu-fb.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -446,7 +446,10 @@ static enum fsl_diu_monitor_port fsl_diu
 			port = FSL_DIU_PORT_DLVDS;
 	}
 
-	return diu_ops.valid_monitor_port(port);
+	if (diu_ops.valid_monitor_port)
+		port = diu_ops.valid_monitor_port(port);
+
+	return port;
 }
 
 /**
@@ -1759,6 +1762,14 @@ static int __init fsl_diu_init(void)
 #else
 	monitor_port = fsl_diu_name_to_port(monitor_string);
 #endif
+
+	/*
+	 * Must to verify set_pixel_clock. If not implement on platform,
+	 * then that means that there is no platform support for the DIU.
+	 */
+	if (!diu_ops.set_pixel_clock)
+		return -ENODEV;
+
 	pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n");
 
 #ifdef CONFIG_NOT_COHERENT_CACHE

[PATCH 3.2 17/70] net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

commit 7bbadd2d1009575dad675afc16650ebb5aa10612 upstream.

Docbook does not like the definition of macros inside a field declaration
and adds a warning. Move the definition out.

Fixes: 79462ad02e86180 ("net: add validation for the socket syscall protocol argument")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: keep open-coding U8_MAX]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/net/sock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -302,8 +302,8 @@ struct sock {
 				sk_no_check  : 2,
 				sk_userlocks : 4,
 				sk_protocol  : 8,
-#define SK_PROTOCOL_MAX ((u8)~0U)
 				sk_type      : 16;
+#define SK_PROTOCOL_MAX ((u8)~0U)
 	kmemcheck_bitfield_end(flags);
 	int			sk_wmem_queued;
 	gfp_t			sk_allocation;

[PATCH 3.2 62/70] i2c: i801: Add PCI ID for Intel Braswell

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Cox <alan@linux.intel.com>

commit 39e8e30ee544a62c148033d64a979028b958ca05 upstream.

The SMBus host controller is the same as used in Baytrail so add the new
PCI ID to the driver's list of supported IDs.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/i2c/busses/i2c-i801.c | 2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -148,6 +148,7 @@
 
 /* Older devices have their ID defined in <linux/pci_ids.h> */
 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS		0x0f12
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS		0x2292
 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS		0x1c22
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS		0x1d22
 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -666,6 +667,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 32/70] KEYS: Fix race between read and revoke

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit b4a1b4f5047e4f54e194681125c74c0aa64d637d upstream.

This fixes CVE-2015-7550.

There's a race between keyctl_read() and keyctl_revoke().  If the revoke
happens between keyctl_read() checking the validity of a key and the key's
semaphore being taken, then the key type read method will see a revoked key.

This causes a problem for the user-defined key type because it assumes in
its read method that there will always be a payload in a non-revoked key
and doesn't check for a NULL pointer.

Fix this by making keyctl_read() check the validity of a key after taking
semaphore instead of before.

I think the bug was introduced with the original keyrings code.

This was discovered by a multithreaded test program generated by syzkaller
(http://github.com/google/syzkaller).  Here's a cleaned up version:

	#include <sys/types.h>
	#include <keyutils.h>
	#include <pthread.h>
	void *thr0(void *arg)
	{
		key_serial_t key = (unsigned long)arg;
		keyctl_revoke(key);
		return 0;
	}
	void *thr1(void *arg)
	{
		key_serial_t key = (unsigned long)arg;
		char buffer[16];
		keyctl_read(key, buffer, 16);
		return 0;
	}
	int main()
	{
		key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING);
		pthread_t th[5];
		pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key);
		pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key);
		pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key);
		pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key);
		pthread_join(th[0], 0);
		pthread_join(th[1], 0);
		pthread_join(th[2], 0);
		pthread_join(th[3], 0);
		return 0;
	}

Build as:

	cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread

Run as:

	while keyctl-race; do :; done

as it may need several iterations to crash the kernel.  The crash can be
summarised as:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
	IP: [<ffffffff81279b08>] user_read+0x56/0xa3
	...
	Call Trace:
	 [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7
	 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0
	 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 security/keys/keyctl.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -688,16 +688,16 @@ long keyctl_read_key(key_serial_t keyid,
 
 	/* the key is probably readable - now try to read it */
 can_read_key:
-	ret = key_validate(key);
-	if (ret == 0) {
-		ret = -EOPNOTSUPP;
-		if (key->type->read) {
-			/* read the data with the semaphore held (since we
-			 * might sleep) */
-			down_read(&key->sem);
+	ret = -EOPNOTSUPP;
+	if (key->type->read) {
+		/* Read the data with the semaphore held (since we might sleep)
+		 * to protect against the key being updated or revoked.
+		 */
+		down_read(&key->sem);
+		ret = key_validate(key);
+		if (ret == 0)
 			ret = key->type->read(key, buffer, buflen);
-			up_read(&key->sem);
-		}
+		up_read(&key->sem);
 	}
 
 error2:

[PATCH 3.2 50/70] ahci: Remove Device ID for Intel Sunrise Point PCH

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: James Ralston <james.d.ralston@intel.com>

commit 46319e13581a6c442b0a0e5a3bd5d9af4496f252 upstream.

This patch removes a duplicate AHCI-mode SATA Device ID for the Intel Sunrise Point PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c | 1 -
 1 file changed, 1 deletion(-)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -351,7 +351,6 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
-	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */

[PATCH 3.2 67/70] i2c: i801: Document Intel DNV and Broxton

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

commit 2b630df721ee4c286d286ab5d5d958d34c86f067 upstream.

Add missing entries into i2c-i801 documentation and Kconfig about recently
added Intel DNV and Broxton.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 | 2 ++
 drivers/i2c/busses/Kconfig        | 2 ++
 2 files changed, 4 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -30,6 +30,8 @@ Supported adapters:
   * Intel BayTrail (SOC)
   * Intel Sunrise Point-H (PCH)
   * Intel Sunrise Point-LP (PCH)
+  * Intel DNV (SOC)
+  * Intel Broxton (SOC)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -113,6 +113,8 @@ config I2C_I801
 	    BayTrail (SOC)
 	    Sunrise Point-H (PCH)
 	    Sunrise Point-LP (PCH)
+	    DNV (SOC)
+	    Broxton (SOC)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

[PATCH 3.2 30/70] USB: ipaq.c: fix a timeout loop

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit abdc9a3b4bac97add99e1d77dc6d28623afe682b upstream.

The code expects the loop to end with "retries" set to zero but, because
it is a post-op, it will end set to -1.  I have fixed this by moving the
decrement inside the loop.

Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/ipaq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -582,7 +582,8 @@ static int ipaq_open(struct tty_struct *
 	 * through. Since this has a reasonably high failure rate, we retry
 	 * several times.
 	 */
-	while (retries--) {
+	while (retries) {
+		retries--;
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
 				0x1, 0, NULL, 0, 100);

[PATCH 3.2 44/70] kvm: x86: only channel 0 of the i8254 is linked to the HPET

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <pbonzini@redhat.com>

commit e5e57e7a03b1cdcb98e4aed135def2a08cbf3257 upstream.

While setting the KVM PIT counters in 'kvm_pit_load_count', if
'hpet_legacy_start' is set, the function disables the timer on
channel[0], instead of the respective index 'channel'. This is
because channels 1-3 are not linked to the HPET.  Fix the caller
to only activate the special HPET processing for channel 0.

Reported-by: P J P <pjp@fedoraproject.org>
Fixes: 0185604c2d82c560dab2f2933a18f797e74ab5a8
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/kvm/i8254.c | 1 +
 arch/x86/kvm/x86.c   | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -437,6 +437,7 @@ void kvm_pit_load_count(struct kvm *kvm,
 	u8 saved_mode;
 	if (hpet_legacy_start) {
 		/* save existing mode for later reenablement */
+		WARN_ON(channel != 0);
 		saved_mode = kvm->arch.vpit->pit_state.channels[0].mode;
 		kvm->arch.vpit->pit_state.channels[0].mode = 0xff; /* disable timer */
 		pit_load_count(kvm, channel, val);
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3470,7 +3470,8 @@ static int kvm_vm_ioctl_set_pit2(struct
 	       sizeof(kvm->arch.vpit->pit_state.channels));
 	kvm->arch.vpit->pit_state.flags = ps->flags;
 	for (i = 0; i < 3; i++)
-		kvm_pit_load_count(kvm, i, kvm->arch.vpit->pit_state.channels[i].count, start);
+		kvm_pit_load_count(kvm, i, kvm->arch.vpit->pit_state.channels[i].count,
+				   start && i == 0);
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }

[PATCH 3.2 48/70] ahci: Add Device IDs for Intel Wellsburg PCH

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: James Ralston <james.d.ralston@intel.com>

commit efda332cb66d78d6fdf6f98e7b067480f43624f2 upstream.

This patch adds the RAID-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c | 2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -324,6 +324,8 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */
 	{ PCI_VDEVICE(INTEL, 0x8d04), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d06), board_ahci }, /* Wellsburg RAID */

[PATCH 3.2 47/70] vmstat: allocate vmstat_wq before it is used

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Hocko <mhocko@suse.com>

commit 751e5f5c753e8d447bcf89f9e96b9616ac081628 upstream.

kernel test robot has reported the following crash:

  BUG: unable to handle kernel NULL pointer dereference at 00000100
  IP: [<c1074df6>] __queue_work+0x26/0x390
  *pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53
  Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP
  CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe #1
  Workqueue: events vmstat_shepherd
  task: cb684600 ti: cb7ba000 task.ti: cb7ba000
  EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0
  EIP is at __queue_work+0x26/0x390
  EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000
  ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38
   DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
  CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0
  Stack:
  Call Trace:
    __queue_delayed_work+0xa1/0x160
    queue_delayed_work_on+0x36/0x60
    vmstat_shepherd+0xad/0xf0
    process_one_work+0x1aa/0x4c0
    worker_thread+0x41/0x440
    kthread+0xb0/0xd0
    ret_from_kernel_thread+0x21/0x40

The reason is that start_shepherd_timer schedules the shepherd work item
which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates
that workqueue so if the further initialization takes more than HZ we
might end up scheduling on a NULL vmstat_wq.  This is really unlikely
but not impossible.

Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: This precise race condition doesn't exist, but there
 is a similar potential race with CPU hotplug.  So move the alloc_workqueue()
 above register_cpu_notifier().]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 mm/vmstat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1203,9 +1203,10 @@ static int __init setup_vmstat(void)
 #ifdef CONFIG_SMP
 	int cpu;
 
+	vmstat_wq = alloc_workqueue("vmstat", WQ_FREEZABLE|WQ_MEM_RECLAIM, 0);
+
 	register_cpu_notifier(&vmstat_notifier);
 
-	vmstat_wq = alloc_workqueue("vmstat", WQ_FREEZABLE|WQ_MEM_RECLAIM, 0);
 	for_each_online_cpu(cpu)
 		start_cpu_timer(cpu);
 #endif

[PATCH 3.2 18/70] ftrace/scripts: Have recordmcount copy the object file

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit a50bd43935586420fb75f4558369eb08566fac5e upstream.

Russell King found that he had weird side effects when compiling the kernel
with hard linked ccache. The reason was that recordmcount modified the
kernel in place via mmap, and when a file gets modified twice by
recordmcount, it will complain about it. To fix this issue, Russell wrote a
patch that checked if the file was hard linked more than once and would
unlink it if it was.

Linus Torvalds was not happy with the fact that recordmcount does this in
place modification. Instead of doing the unlink only if the file has two or
more hard links, it does the unlink all the time. In otherwords, it always
does a copy if it changed something. That is, it does the write out if a
change was made.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 scripts/recordmcount.c | 145 +++++++++++++++++++++++++++++++++++++------------
 1 file changed, 110 insertions(+), 35 deletions(-)

--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -35,12 +35,17 @@
 
 static int fd_map;	/* File descriptor for file being modified. */
 static int mmap_failed; /* Boolean flag. */
-static void *ehdr_curr; /* current ElfXX_Ehdr *  for resource cleanup */
 static char gpfx;	/* prefix for global symbol name (sometimes '_') */
 static struct stat sb;	/* Remember .st_size, etc. */
 static jmp_buf jmpenv;	/* setjmp/longjmp per-file error escape */
 static const char *altmcount;	/* alternate mcount symbol name */
 static int warn_on_notrace_sect; /* warn when section has mcount not being recorded */
+static void *file_map;	/* pointer of the mapped file */
+static void *file_end;	/* pointer to the end of the mapped file */
+static int file_updated; /* flag to state file was changed */
+static void *file_ptr;	/* current file pointer location */
+static void *file_append; /* added to the end of the file */
+static size_t file_append_size; /* how much is added to end of file */
 
 /* setjmp() return values */
 enum {
@@ -54,10 +59,14 @@ static void
 cleanup(void)
 {
 	if (!mmap_failed)
-		munmap(ehdr_curr, sb.st_size);
+		munmap(file_map, sb.st_size);
 	else
-		free(ehdr_curr);
-	close(fd_map);
+		free(file_map);
+	file_map = NULL;
+	free(file_append);
+	file_append = NULL;
+	file_append_size = 0;
+	file_updated = 0;
 }
 
 static void __attribute__((noreturn))
@@ -79,12 +88,22 @@ succeed_file(void)
 static off_t
 ulseek(int const fd, off_t const offset, int const whence)
 {
-	off_t const w = lseek(fd, offset, whence);
-	if (w == (off_t)-1) {
-		perror("lseek");
+	switch (whence) {
+	case SEEK_SET:
+		file_ptr = file_map + offset;
+		break;
+	case SEEK_CUR:
+		file_ptr += offset;
+		break;
+	case SEEK_END:
+		file_ptr = file_map + (sb.st_size - offset);
+		break;
+	}
+	if (file_ptr < file_map) {
+		fprintf(stderr, "lseek: seek before file\n");
 		fail_file();
 	}
-	return w;
+	return file_ptr - file_map;
 }
 
 static size_t
@@ -101,12 +120,38 @@ uread(int const fd, void *const buf, siz
 static size_t
 uwrite(int const fd, void const *const buf, size_t const count)
 {
-	size_t const n = write(fd, buf, count);
-	if (n != count) {
-		perror("write");
-		fail_file();
+	size_t cnt = count;
+	off_t idx = 0;
+
+	file_updated = 1;
+
+	if (file_ptr + count >= file_end) {
+		off_t aoffset = (file_ptr + count) - file_end;
+
+		if (aoffset > file_append_size) {
+			file_append = realloc(file_append, aoffset);
+			file_append_size = aoffset;
+		}
+		if (!file_append) {
+			perror("write");
+			fail_file();
+		}
+		if (file_ptr < file_end) {
+			cnt = file_end - file_ptr;
+		} else {
+			cnt = 0;
+			idx = aoffset - count;
+		}
 	}
-	return n;
+
+	if (cnt)
+		memcpy(file_ptr, buf, cnt);
+
+	if (cnt < count)
+		memcpy(file_append + idx, buf + cnt, count - cnt);
+
+	file_ptr += count;
+	return count;
 }
 
 static void *
@@ -163,9 +208,7 @@ static int make_nop_x86(void *map, size_
  */
 static void *mmap_file(char const *fname)
 {
-	void *addr;
-
-	fd_map = open(fname, O_RDWR);
+	fd_map = open(fname, O_RDONLY);
 	if (fd_map < 0 || fstat(fd_map, &sb) < 0) {
 		perror(fname);
 		fail_file();
@@ -174,29 +217,58 @@ static void *mmap_file(char const *fname
 		fprintf(stderr, "not a regular file: %s\n", fname);
 		fail_file();
 	}
-	addr = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE,
-		    fd_map, 0);
+	file_map = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE,
+			fd_map, 0);
 	mmap_failed = 0;
-	if (addr == MAP_FAILED) {
+	if (file_map == MAP_FAILED) {
 		mmap_failed = 1;
-		addr = umalloc(sb.st_size);
-		uread(fd_map, addr, sb.st_size);
+		file_map = umalloc(sb.st_size);
+		uread(fd_map, file_map, sb.st_size);
 	}
-	if (sb.st_nlink != 1) {
-		/* file is hard-linked, break the hard link */
-		close(fd_map);
-		if (unlink(fname) < 0) {
-			perror(fname);
-			fail_file();
-		}
-		fd_map = open(fname, O_RDWR | O_CREAT, sb.st_mode);
-		if (fd_map < 0) {
-			perror(fname);
+	close(fd_map);
+
+	file_end = file_map + sb.st_size;
+
+	return file_map;
+}
+
+static void write_file(const char *fname)
+{
+	char tmp_file[strlen(fname) + 4];
+	size_t n;
+
+	if (!file_updated)
+		return;
+
+	sprintf(tmp_file, "%s.rc", fname);
+
+	/*
+	 * After reading the entire file into memory, delete it
+	 * and write it back, to prevent weird side effects of modifying
+	 * an object file in place.
+	 */
+	fd_map = open(tmp_file, O_WRONLY | O_TRUNC | O_CREAT, sb.st_mode);
+	if (fd_map < 0) {
+		perror(fname);
+		fail_file();
+	}
+	n = write(fd_map, file_map, sb.st_size);
+	if (n != sb.st_size) {
+		perror("write");
+		fail_file();
+	}
+	if (file_append_size) {
+		n = write(fd_map, file_append, file_append_size);
+		if (n != file_append_size) {
+			perror("write");
 			fail_file();
 		}
-		uwrite(fd_map, addr, sb.st_size);
 	}
-	return addr;
+	close(fd_map);
+	if (rename(tmp_file, fname) < 0) {
+		perror(fname);
+		fail_file();
+	}
 }
 
 /* w8rev, w8nat, ...: Handle endianness. */
@@ -303,7 +375,6 @@ do_file(char const *const fname)
 	Elf32_Ehdr *const ehdr = mmap_file(fname);
 	unsigned int reltype = 0;
 
-	ehdr_curr = ehdr;
 	w = w4nat;
 	w2 = w2nat;
 	w8 = w8nat;
@@ -415,6 +486,7 @@ do_file(char const *const fname)
 	}
 	}  /* end switch */
 
+	write_file(fname);
 	cleanup();
 }
 
@@ -467,11 +539,14 @@ main(int argc, char *argv[])
 		case SJ_SETJMP:    /* normal sequence */
 			/* Avoid problems if early cleanup() */
 			fd_map = -1;
-			ehdr_curr = NULL;
 			mmap_failed = 1;
+			file_map = NULL;
+			file_ptr = NULL;
+			file_updated = 0;
 			do_file(file);
 			break;
 		case SJ_FAIL:    /* error in do_file or below */
+			sprintf("%s: failed\n", file);
 			++n_error;
 			break;
 		case SJ_SUCCEED:    /* premature success */

[PATCH 3.2 52/70] ahci: add new Intel device IDs

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandra Yates <alexandra.yates@linux.intel.com>

commit 56e74338a535cbcc2f2da08b1ea1a92920194364 upstream.

Adding Intel codename Lewisburg platform device IDs for SATA.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -324,6 +324,16 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0xa182), board_ahci }, /* Lewisburg AHCI*/
+	{ PCI_VDEVICE(INTEL, 0xa202), board_ahci }, /* Lewisburg AHCI*/
+	{ PCI_VDEVICE(INTEL, 0xa184), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa204), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa186), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa18e), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */

[PATCH 3.2 54/70] ahci: Order SATA device IDs for codename Lewisburg

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandra Yates <alexandra.yates@linux.intel.com>

commit 4d92f0099a06ef0e36c7673f7c090f1a448b2d1b upstream.

This change was to preserve the ascending order of device IDs.
There was an exception with the first two Lewisburg device IDs to
keep all device IDs of the same kind grouped by code name.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -324,16 +324,6 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */
-	{ PCI_VDEVICE(INTEL, 0xa182), board_ahci }, /* Lewisburg AHCI*/
-	{ PCI_VDEVICE(INTEL, 0xa202), board_ahci }, /* Lewisburg AHCI*/
-	{ PCI_VDEVICE(INTEL, 0xa184), board_ahci }, /* Lewisburg RAID*/
-	{ PCI_VDEVICE(INTEL, 0xa204), board_ahci }, /* Lewisburg RAID*/
-	{ PCI_VDEVICE(INTEL, 0xa186), board_ahci }, /* Lewisburg RAID*/
-	{ PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/
-	{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/
-	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* Lewisburg RAID*/
-	{ PCI_VDEVICE(INTEL, 0xa18e), board_ahci }, /* Lewisburg RAID*/
-	{ PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */
@@ -366,6 +356,16 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0xa106), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
+	{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa182), board_ahci }, /* Lewisburg AHCI*/
+	{ PCI_VDEVICE(INTEL, 0xa184), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa186), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa18e), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa202), board_ahci }, /* Lewisburg AHCI*/
+	{ PCI_VDEVICE(INTEL, 0xa204), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

[PATCH 3.2 16/70] scripts: recordmcount: break hardlinks

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@arm.linux.org.uk>

commit dd39a26538e37f6c6131e829a4a510787e43c783 upstream.

recordmcount edits the file in-place, which can cause problems when
using ccache in hardlink mode.  Arrange for recordmcount to break a
hardlinked object.

Link: http://lkml.kernel.org/r/E1a7MVT-0000et-62@rmk-PC.arm.linux.org.uk

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 scripts/recordmcount.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -182,6 +182,20 @@ static void *mmap_file(char const *fname
 		addr = umalloc(sb.st_size);
 		uread(fd_map, addr, sb.st_size);
 	}
+	if (sb.st_nlink != 1) {
+		/* file is hard-linked, break the hard link */
+		close(fd_map);
+		if (unlink(fname) < 0) {
+			perror(fname);
+			fail_file();
+		}
+		fd_map = open(fname, O_RDWR | O_CREAT, sb.st_mode);
+		if (fd_map < 0) {
+			perror(fname);
+			fail_file();
+		}
+		uwrite(fd_map, addr, sb.st_size);
+	}
 	return addr;
 }
 

[PATCH 3.2 70/70] HID: dragonrise: fix HID Descriptor for 0x0006 PID

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej Zuk <gzmlke@gmail.com>

commit 18339f59c3a6698ee17d32970c9e1e450b16e7c3 upstream.

Fixed HID descriptor for DragonRise Joystick.  Replaced default descriptor
which doubles Z axis and causes mixing values of X and Z axes.

Signed-off-by: Maciej Zuk <gzmlke@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hid/hid-dr.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

--- a/drivers/hid/hid-dr.c
+++ b/drivers/hid/hid-dr.c
@@ -236,6 +236,58 @@ static __u8 pid0011_rdesc_fixed[] = {
 	0xC0                /*  End Collection                  */
 };
 
+static __u8 pid0006_rdesc_fixed[] = {
+	0x05, 0x01,        /* Usage Page (Generic Desktop)	*/
+	0x09, 0x04,        /* Usage (Joystick)			*/
+	0xA1, 0x01,        /* Collection (Application)		*/
+	0xA1, 0x02,        /*   Collection (Logical)		*/
+	0x75, 0x08,        /*     Report Size (8)		*/
+	0x95, 0x05,        /*     Report Count (5)		*/
+	0x15, 0x00,        /*     Logical Minimum (0)		*/
+	0x26, 0xFF, 0x00,  /*     Logical Maximum (255)		*/
+	0x35, 0x00,        /*     Physical Minimum (0)		*/
+	0x46, 0xFF, 0x00,  /*     Physical Maximum (255)	*/
+	0x09, 0x30,        /*     Usage (X)			*/
+	0x09, 0x33,        /*     Usage (Ry)			*/
+	0x09, 0x32,        /*     Usage (Z)			*/
+	0x09, 0x31,        /*     Usage (Y)			*/
+	0x09, 0x34,        /*     Usage (Ry)			*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0x75, 0x04,        /*     Report Size (4)		*/
+	0x95, 0x01,        /*     Report Count (1)		*/
+	0x25, 0x07,        /*     Logical Maximum (7)		*/
+	0x46, 0x3B, 0x01,  /*     Physical Maximum (315)	*/
+	0x65, 0x14,        /*     Unit (Centimeter)		*/
+	0x09, 0x39,        /*     Usage (Hat switch)		*/
+	0x81, 0x42,        /*     Input (Variable)		*/
+	0x65, 0x00,        /*     Unit (None)			*/
+	0x75, 0x01,        /*     Report Size (1)		*/
+	0x95, 0x0C,        /*     Report Count (12)		*/
+	0x25, 0x01,        /*     Logical Maximum (1)		*/
+	0x45, 0x01,        /*     Physical Maximum (1)		*/
+	0x05, 0x09,        /*     Usage Page (Button)		*/
+	0x19, 0x01,        /*     Usage Minimum (0x01)		*/
+	0x29, 0x0C,        /*     Usage Maximum (0x0C)		*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0x06, 0x00, 0xFF,  /*     Usage Page (Vendor Defined)	*/
+	0x75, 0x01,        /*     Report Size (1)		*/
+	0x95, 0x08,        /*     Report Count (8)		*/
+	0x25, 0x01,        /*     Logical Maximum (1)		*/
+	0x45, 0x01,        /*     Physical Maximum (1)		*/
+	0x09, 0x01,        /*     Usage (0x01)			*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0xC0,              /*   End Collection			*/
+	0xA1, 0x02,        /*   Collection (Logical)		*/
+	0x75, 0x08,        /*     Report Size (8)		*/
+	0x95, 0x07,        /*     Report Count (7)		*/
+	0x46, 0xFF, 0x00,  /*     Physical Maximum (255)	*/
+	0x26, 0xFF, 0x00,  /*     Logical Maximum (255)		*/
+	0x09, 0x02,        /*     Usage (0x02)			*/
+	0x91, 0x02,        /*     Output (Variable)		*/
+	0xC0,              /*   End Collection			*/
+	0xC0               /* End Collection			*/
+};
+
 static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 				unsigned int *rsize)
 {
@@ -246,6 +298,12 @@ static __u8 *dr_report_fixup(struct hid_
 			*rsize = sizeof(pid0011_rdesc_fixed);
 		}
 		break;
+	case 0x0006:
+		if (*rsize == sizeof(pid0006_rdesc_fixed)) {
+			rdesc = pid0006_rdesc_fixed;
+			*rsize = sizeof(pid0006_rdesc_fixed);
+		}
+		break;
 	}
 	return rdesc;
 }

[PATCH 3.2 46/70] udp: properly support MSG_PEEK with truncated buffers

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 197c949e7798fbf28cfadc69d9ca0c2abbf93191 upstream.

Backport of this upstream commit into stable kernels :
89c22d8c3b27 ("net: Fix skb csum races when peeking")
exposed a bug in udp stack vs MSG_PEEK support, when user provides
a buffer smaller than skb payload.

In this case,
skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr),
                                 msg->msg_iov);
returns -EFAULT.

This bug does not happen in upstream kernels since Al Viro did a great
job to replace this into :
skb_copy_and_csum_datagram_msg(skb, sizeof(struct udphdr), msg);
This variant is safe vs short buffers.

For the time being, instead reverting Herbert Xu patch and add back
skb->ip_summed invalid changes, simply store the result of
udp_lib_checksum_complete() so that we avoid computing the checksum a
second time, and avoid the problematic
skb_copy_and_csum_datagram_iovec() call.

This patch can be applied on recent kernels as it avoids a double
checksumming, then backported to stable kernels as a bug fix.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/ipv4/udp.c | 6 ++++--
 net/ipv6/udp.c | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1172,6 +1172,7 @@ int udp_recvmsg(struct kiocb *iocb, stru
 	int peeked;
 	int err;
 	int is_udplite = IS_UDPLITE(sk);
+	bool checksum_valid = false;
 	bool slow;
 
 	if (flags & MSG_ERRQUEUE)
@@ -1197,11 +1198,12 @@ try_again:
 	 */
 
 	if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) {
-		if (udp_lib_checksum_complete(skb))
+		checksum_valid = !udp_lib_checksum_complete(skb);
+		if (!checksum_valid)
 			goto csum_copy_err;
 	}
 
-	if (skb_csum_unnecessary(skb))
+	if (checksum_valid || skb_csum_unnecessary(skb))
 		err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
 					      msg->msg_iov, copied);
 	else {
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -344,6 +344,7 @@ int udpv6_recvmsg(struct kiocb *iocb, st
 	int peeked;
 	int err;
 	int is_udplite = IS_UDPLITE(sk);
+	bool checksum_valid = false;
 	int is_udp4;
 	bool slow;
 
@@ -375,11 +376,12 @@ try_again:
 	 */
 
 	if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) {
-		if (udp_lib_checksum_complete(skb))
+		checksum_valid = !udp_lib_checksum_complete(skb);
+		if (!checksum_valid)
 			goto csum_copy_err;
 	}
 
-	if (skb_csum_unnecessary(skb))
+	if (checksum_valid || skb_csum_unnecessary(skb))
 		err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
 					      msg->msg_iov, copied       );
 	else {

[PATCH 3.2 66/70] i2c: i801: Add support for Intel Broxton

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

commit dd77f423e516293c37c2370b44fd700900409c48 upstream.

This patch adds the SMBUS PCI ID of Intel Broxton.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/i2c/busses/i2c-i801.c | 3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -65,6 +65,7 @@
  * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
  * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
  * DNV (SOC)			0x19df	32	hard	yes	yes	yes
+ * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -174,6 +175,7 @@
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
+#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -677,6 +679,7 @@ static const struct pci_device_id i801_i
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.2 19/70] s390/dis: Fix handling of format specifiers

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Holzheu <holzheu@linux.vnet.ibm.com>

commit 272fa59ccb4fc802af28b1d699c2463db6a71bf7 upstream.

The print_insn() function returns strings like "lghi %r1,0". To escape the
'%' character in sprintf() a second '%' is used. For example "lghi %%r1,0"
is converted into "lghi %r1,0".

After print_insn() the output string is passed to printk(). Because format
specifiers like "%r" or "%f" are ignored by printk() this works by chance
most of the time. But for instructions with control registers like
"lctl %c6,%c6,780" this fails because printk() interprets "%c" as
character format specifier.

Fix this problem and escape the '%' characters twice.

For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf()
into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780".

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[bwh: Backported to 3.2: drop the OPERAND_VR case]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/s390/kernel/dis.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -1503,14 +1503,21 @@ static int print_insn(char *buffer, unsi
 			}
 			if (separator)
 				ptr += sprintf(ptr, "%c", separator);
+			/*
+			 * Use four '%' characters below because of the
+			 * following two conversions:
+			 *
+			 *  1) sprintf: %%%%r -> %%r
+			 *  2) printk : %%r   -> %r
+			 */
 			if (operand->flags & OPERAND_GPR)
-				ptr += sprintf(ptr, "%%r%i", value);
+				ptr += sprintf(ptr, "%%%%r%i", value);
 			else if (operand->flags & OPERAND_FPR)
-				ptr += sprintf(ptr, "%%f%i", value);
+				ptr += sprintf(ptr, "%%%%f%i", value);
 			else if (operand->flags & OPERAND_AR)
-				ptr += sprintf(ptr, "%%a%i", value);
+				ptr += sprintf(ptr, "%%%%a%i", value);
 			else if (operand->flags & OPERAND_CR)
-				ptr += sprintf(ptr, "%%c%i", value);
+				ptr += sprintf(ptr, "%%%%c%i", value);
 			else if (operand->flags & OPERAND_PCREL)
 				ptr += sprintf(ptr, "%lx", (signed int) value
 								      + addr);

[PATCH 3.2 69/70] cdrom: Random writing support for BD-RE media

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Georgios Toptsidis <gtoptsid@gmail.com>

commit f7e7868b4743f1cc5e59e6e0ddd3ccf9cfe53a1b upstream.

Recently, i bought a blu-ray writer and noticed that while cdrecord
worked perfectly, random writing didn't work on rewritable bd-re media.
For example, dd if=/dev/zero of=/dev/sr0 bs=32768 count=2 gave the usual
"read-only file system" message.

After checking if the problem lies with my burner or firmware, i grep-ed
the kernel source for EROFS. One of the results was in the cdrom driver.

I tried to follow the function chain and ended in the cdrom_is_dvd_rw
function where writing is permitted only for DVD-RAM and DVD+RW media.
I added a new case label for 0x43 which is the profile name of BD-RE
and now it works correctly for BD-RE too.

Maybe there is a better way of implementing this, like a new function
checking for blu-ray support and called from cdrom_open_write like
it happens for mrw and dvdram media, but adding the case label worked.

Thank you for your time.

Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/cdrom/cdrom.c | 1 +
 1 file changed, 1 insertion(+)

--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -873,6 +873,7 @@ static int cdrom_is_dvd_rw(struct cdrom_
 	switch (cdi->mmc3_profile) {
 	case 0x12:	/* DVD-RAM	*/
 	case 0x1A:	/* DVD+RW	*/
+	case 0x43:	/* BD-RE	*/
 		return 0;
 	default:
 		return 1;

[PATCH 3.2 07/70] ses: fix additional element traversal bug

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <James.Bottomley@HansenPartnership.com>

commit 5e1033561da1152c57b97ee84371dba2b3d64c25 upstream.

KASAN found that our additional element processing scripts drop off
the end of the VPD page into unallocated space.  The reason is that
not every element has additional information but our traversal
routines think they do, leading to them expecting far more additional
information than is present.  Fix this by adding a gate to the
traversal routine so that it only processes elements that are expected
to have additional information (list is in SES-2 section 6.1.13.1:
Additional Element Status diagnostic page overview)

Reported-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Tested-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/ses.c        | 10 +++++++++-
 include/linux/enclosure.h |  4 ++++
 2 files changed, 13 insertions(+), 1 deletion(-)

--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -454,7 +454,15 @@ static void ses_enclosure_data_process(s
 			if (desc_ptr)
 				desc_ptr += len;
 
-			if (addl_desc_ptr)
+			if (addl_desc_ptr &&
+			    /* only find additional descriptions for specific devices */
+			    (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER ||
+			     /* these elements are optional */
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS))
 				addl_desc_ptr += addl_desc_ptr[1] + 2;
 
 		}
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -29,7 +29,11 @@
 /* A few generic types ... taken from ses-2 */
 enum enclosure_component_type {
 	ENCLOSURE_COMPONENT_DEVICE = 0x01,
+	ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS = 0x07,
+	ENCLOSURE_COMPONENT_SCSI_TARGET_PORT = 0x14,
+	ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT = 0x15,
 	ENCLOSURE_COMPONENT_ARRAY_DEVICE = 0x17,
+	ENCLOSURE_COMPONENT_SAS_EXPANDER = 0x18,
 };
 
 /* ses-2 common element status */

[PATCH 3.2 05/70] rfkill: copy the name into the rfkill struct

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit b7bb110008607a915298bf0f47d25886ecb94477 upstream.

Some users of rfkill, like NFC and cfg80211, use a dynamic name when
allocating rfkill, in those cases dev_name(). Therefore, the pointer
passed to rfkill_alloc() might not be valid forever, I specifically
found the case that the rfkill name was quite obviously an invalid
pointer (or at least garbage) when the wiphy had been renamed.

Fix this by making a copy of the rfkill name in rfkill_alloc().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/rfkill/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -50,7 +50,6 @@
 struct rfkill {
 	spinlock_t		lock;
 
-	const char		*name;
 	enum rfkill_type	type;
 
 	unsigned long		state;
@@ -74,6 +73,7 @@ struct rfkill {
 	struct delayed_work	poll_work;
 	struct work_struct	uevent_work;
 	struct work_struct	sync_work;
+	char			name[];
 };
 #define to_rfkill(d)	container_of(d, struct rfkill, dev)
 
@@ -848,14 +848,14 @@ struct rfkill * __must_check rfkill_allo
 	if (WARN_ON(type == RFKILL_TYPE_ALL || type >= NUM_RFKILL_TYPES))
 		return NULL;
 
-	rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL);
+	rfkill = kzalloc(sizeof(*rfkill) + strlen(name) + 1, GFP_KERNEL);
 	if (!rfkill)
 		return NULL;
 
 	spin_lock_init(&rfkill->lock);
 	INIT_LIST_HEAD(&rfkill->node);
 	rfkill->type = type;
-	rfkill->name = name;
+	strcpy(rfkill->name, name);
 	rfkill->ops = ops;
 	rfkill->data = ops_data;
 

[PATCH 3.2 02/70] ipv6: sctp: fix lockdep splat in sctp_v6_get_dst()

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 69ce6487dcd364245a3d26322fc8f4ffd1e8d947 upstream.

While cooking the sctp np->opt rcu fixes, I forgot to move
one rcu_read_unlock() after the added rcu_dereference() in
sctp_v6_get_dst()

This gave lockdep warnings reported by Dave Jones.

Fixes: c836a8ba9386 ("ipv6: sctp: add rcu protection around np->opt")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/sctp/ipv6.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -314,14 +314,13 @@ static void sctp_v6_get_dst(struct sctp_
 			}
 		}
 	}
-	rcu_read_unlock();
-
 	if (baddr) {
 		ipv6_addr_copy(&fl6->saddr, &baddr->v6.sin6_addr);
 		fl6->fl6_sport = baddr->v6.sin6_port;
 		final_p = fl6_update_dst(fl6, np->opt, &final);
 		dst = ip6_dst_lookup_flow(sk, fl6, final_p, false);
 	}
+	rcu_read_unlock();
 
 out:
 	if (!IS_ERR(dst)) {

[PATCH 3.2 06/70] ses: Fix problems with simple enclosures

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <James.Bottomley@HansenPartnership.com>

commit 3417c1b5cb1fdc10261dbed42b05cc93166a78fd upstream.

Simple enclosure implementations (mostly USB) are allowed to return only
page 8 to every diagnostic query.  That really confuses our
implementation because we assume the return is the page we asked for and
end up doing incorrect offsets based on bogus information leading to
accesses outside of allocated ranges.  Fix that by checking the page
code of the return and giving an error if it isn't the one we asked for.
This should fix reported bugs with USB storage by simply refusing to
attach to enclosures that behave like this.  It's also good defensive
practise now that we're starting to see more USB enclosures.

Reported-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/ses.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -70,6 +70,7 @@ static int ses_probe(struct device *dev)
 static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 			 void *buf, int bufflen)
 {
+	int ret;
 	unsigned char cmd[] = {
 		RECEIVE_DIAGNOSTIC,
 		1,		/* Set PCV bit */
@@ -78,9 +79,26 @@ static int ses_recv_diag(struct scsi_dev
 		bufflen & 0xff,
 		0
 	};
+	unsigned char recv_page_code;
 
-	return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+	ret =  scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
 				NULL, SES_TIMEOUT, SES_RETRIES, NULL);
+	if (unlikely(!ret))
+		return ret;
+
+	recv_page_code = ((unsigned char *)buf)[0];
+
+	if (likely(recv_page_code == page_code))
+		return ret;
+
+	/* successful diagnostic but wrong page code.  This happens to some
+	 * USB devices, just print a message and pretend there was an error */
+
+	sdev_printk(KERN_ERR, sdev,
+		    "Wrong diagnostic page; asked for %d got %u\n",
+		    page_code, recv_page_code);
+
+	return -EINVAL;
 }
 
 static int ses_send_diag(struct scsi_device *sdev, int page_code,

[PATCH 3.2 13/70] mISDN: fix a loop count

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 40d24c4d8a7430aa4dfd7a665fa3faf3b05b673f upstream.

There are two issue here.
1)  cnt starts as maxloop + 1 so all these loops iterate one more time
    than intended.
2)  At the end of the loop we test for "if (maxloop && !cnt)" but for
    the first two loops, we end with cnt equal to -1.  Changing this to
    a pre-op means we end with cnt set to 0.

Fixes: cae86d4a4e56 ('mISDN: Add driver for Infineon ISDN chipset family')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/isdn/hardware/mISDN/mISDNipac.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -1156,7 +1156,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int
 
 	if (ipac->type & IPAC_TYPE_IPACX) {
 		ista = ReadIPAC(ipac, ISACX_ISTA);
-		while (ista && cnt--) {
+		while (ista && --cnt) {
 			pr_debug("%s: ISTA %02x\n", ipac->name, ista);
 			if (ista & IPACX__ICA)
 				ipac_irq(&ipac->hscx[0], ista);
@@ -1168,7 +1168,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int
 		}
 	} else if (ipac->type & IPAC_TYPE_IPAC) {
 		ista = ReadIPAC(ipac, IPAC_ISTA);
-		while (ista && cnt--) {
+		while (ista && --cnt) {
 			pr_debug("%s: ISTA %02x\n", ipac->name, ista);
 			if (ista & (IPAC__ICD | IPAC__EXD)) {
 				istad = ReadISAC(isac, ISAC_ISTA);
@@ -1186,7 +1186,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int
 			ista = ReadIPAC(ipac, IPAC_ISTA);
 		}
 	} else if (ipac->type & IPAC_TYPE_HSCX) {
-		while (cnt) {
+		while (--cnt) {
 			ista = ReadIPAC(ipac, IPAC_ISTAB + ipac->hscx[1].off);
 			pr_debug("%s: B2 ISTA %02x\n", ipac->name, ista);
 			if (ista)
@@ -1197,7 +1197,6 @@ mISDNipac_irq(struct ipac_hw *ipac, int
 				mISDNisac_irq(isac, istad);
 			if (0 == (ista | istad))
 				break;
-			cnt--;
 		}
 	}
 	if (cnt > maxloop) /* only for ISAC/HSCX without PCI IRQ test */

[PATCH 3.2 04/70] crypto: skcipher - Copy iv from desc even for 0-len walks

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

commit 70d906bc17500edfa9bdd8c8b7e59618c7911613 upstream.

Some ciphers actually support encrypting zero length plaintexts. For
example, many AEAD modes support this. The resulting ciphertext for
those winds up being only the authentication tag, which is a result of
the key, the iv, the additional data, and the fact that the plaintext
had zero length. The blkcipher constructors won't copy the IV to the
right place, however, when using a zero length input, resulting in
some significant problems when ciphers call their initialization
routines, only to find that the ->iv parameter is uninitialized. One
such example of this would be using chacha20poly1305 with a zero length
input, which then calls chacha20, which calls the key setup routine,
which eventually OOPSes due to the uninitialized ->iv member.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 crypto/ablkcipher.c | 2 +-
 crypto/blkcipher.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -280,12 +280,12 @@ static int ablkcipher_walk_first(struct
 	if (WARN_ON_ONCE(in_irq()))
 		return -EDEADLK;
 
+	walk->iv = req->info;
 	walk->nbytes = walk->total;
 	if (unlikely(!walk->total))
 		return 0;
 
 	walk->iv_buffer = NULL;
-	walk->iv = req->info;
 	if (unlikely(((unsigned long)walk->iv & alignmask))) {
 		int err = ablkcipher_copy_iv(walk, tfm, alignmask);
 		if (err)
--- a/crypto/blkcipher.c
+++ b/crypto/blkcipher.c
@@ -329,12 +329,12 @@ static int blkcipher_walk_first(struct b
 	if (WARN_ON_ONCE(in_irq()))
 		return -EDEADLK;
 
+	walk->iv = desc->info;
 	walk->nbytes = walk->total;
 	if (unlikely(!walk->total))
 		return 0;
 
 	walk->buffer = NULL;
-	walk->iv = desc->info;
 	if (unlikely(((unsigned long)walk->iv & alignmask))) {
 		int err = blkcipher_copy_iv(walk, tfm, alignmask);
 		if (err)

[PATCH 3.2 49/70] ahci: Add JMicron 362 device IDs

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 1fefb8fdc6562057a0e4e4542f3d4323981c9686 upstream.

The JMicron JMB362 controller supports AHCI only, but some revisions
use the IDE class code.  These need to be matched by device ID.

These additions have apparently been included by QNAP in their NAS
devices using these controllers.

References: http://bugs.debian.org/634180
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ahci.c | 3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -359,6 +359,9 @@ static const struct pci_device_id ahci_p
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+	/* JMicron 362B and 362C have an AHCI function with IDE class code */
+	{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
+	{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
 
 	/* ATI */
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */

[PATCH 3.2 45/70] Revert "net: add length argument to skb_copy_and_csum_datagram_iovec"

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

This reverts commit 127500d724f8c43f452610c9080444eedb5eaa6c.  That fixed
the problem of buffer over-reads introduced by backporting commit
89c22d8c3b27 ("net: Fix skb csum races when peeking"), but resulted in
incorrect checksumming for short reads.  It will be replaced with a
complete fix.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2134,8 +2134,7 @@ extern int	       skb_copy_datagram_iove
 					       int size);
 extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
 							int hlen,
-							struct iovec *iov,
-							int len);
+							struct iovec *iov);
 extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
 						    int offset,
 						    const struct iovec *from,
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -709,7 +709,6 @@ EXPORT_SYMBOL(__skb_checksum_complete);
  *	@skb: skbuff
  *	@hlen: hardware length
  *	@iov: io vector
- *	@len: amount of data to copy from skb to iov
  *
  *	Caller _must_ check that skb will fit to this iovec.
  *
@@ -719,14 +718,11 @@ EXPORT_SYMBOL(__skb_checksum_complete);
  *			   can be modified!
  */
 int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
-				     int hlen, struct iovec *iov, int len)
+				     int hlen, struct iovec *iov)
 {
 	__wsum csum;
 	int chunk = skb->len - hlen;
 
-	if (chunk > len)
-		chunk = len;
-
 	if (!chunk)
 		return 0;
 
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5198,7 +5198,7 @@ static int tcp_copy_to_iovec(struct sock
 		err = skb_copy_datagram_iovec(skb, hlen, tp->ucopy.iov, chunk);
 	else
 		err = skb_copy_and_csum_datagram_iovec(skb, hlen,
-						       tp->ucopy.iov, chunk);
+						       tp->ucopy.iov);
 
 	if (!err) {
 		tp->ucopy.len -= chunk;
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1207,7 +1207,7 @@ try_again:
 	else {
 		err = skb_copy_and_csum_datagram_iovec(skb,
 						       sizeof(struct udphdr),
-						       msg->msg_iov, copied);
+						       msg->msg_iov);
 
 		if (err == -EINVAL)
 			goto csum_copy_err;
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -479,7 +479,7 @@ static int rawv6_recvmsg(struct kiocb *i
 			goto csum_copy_err;
 		err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
 	} else {
-		err = skb_copy_and_csum_datagram_iovec(skb, 0, msg->msg_iov, copied);
+		err = skb_copy_and_csum_datagram_iovec(skb, 0, msg->msg_iov);
 		if (err == -EINVAL)
 			goto csum_copy_err;
 	}
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -383,8 +383,7 @@ try_again:
 		err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
 					      msg->msg_iov, copied       );
 	else {
-		err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr),
-						       msg->msg_iov, copied);
+		err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov);
 		if (err == -EINVAL)
 			goto csum_copy_err;
 	}
--- a/net/rxrpc/ar-recvmsg.c
+++ b/net/rxrpc/ar-recvmsg.c
@@ -185,8 +185,7 @@ int rxrpc_recvmsg(struct kiocb *iocb, st
 						      msg->msg_iov, copy);
 		} else {
 			ret = skb_copy_and_csum_datagram_iovec(skb, offset,
-							       msg->msg_iov,
-							       copy);
+							       msg->msg_iov);
 			if (ret == -EINVAL)
 				goto csum_copy_error;
 		}

[PATCH 3.2 01/70] sctp: start t5 timer only when peer rwnd is 0 and local state is SHUTDOWN_PENDING

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: lucien <lucien.xin@gmail.com>

commit 8a0d19c5ed417c78d03f4e0fa7215e58c40896d8 upstream.

when A sends a data to B, then A close() and enter into SHUTDOWN_PENDING
state, if B neither claim his rwnd is 0 nor send SACK for this data, A
will keep retransmitting this data until t5 timeout, Max.Retrans times
can't work anymore, which is bad.

if B's rwnd is not 0, it should send abort after Max.Retrans times, only
when B's rwnd == 0 and A's retransmitting beyonds Max.Retrans times, A
will start t5 timer, which is also commit f8d960524328 ("sctp: Enforce
retransmission limit during shutdown") means, but it lacks the condition
peer rwnd == 0.

so fix it by adding a bit (zero_window_announced) in peer to record if
the last rwnd is 0. If it was, zero_window_announced will be set. and use
this bit to decide if start t5 timer when local.state is SHUTDOWN_PENDING.

Fixes: commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: change sack_needed to bitfield as done earlier upstream]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/net/sctp/structs.h | 3 ++-
 net/sctp/outqueue.c        | 1 +
 net/sctp/sm_statefuns.c    | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)

--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1586,7 +1586,8 @@ struct sctp_association {
 		 *             : order.  When DATA chunks are out of order,
 		 *             : SACK's are not delayed (see Section 6).
 		 */
-		__u8    sack_needed;     /* Do we need to sack the peer? */
+		__u8    sack_needed:1,     /* Do we need to sack the peer? */
+			zero_window_announced:1;
 		__u32	sack_cnt;
 
 		/* These are capabilities which our peer advertised.  */
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -1265,6 +1265,7 @@ int sctp_outq_sack(struct sctp_outq *q,
 	 */
 
 	sack_a_rwnd = ntohl(sack->a_rwnd);
+	asoc->peer.zero_window_announced = !sack_a_rwnd;
 	outstanding = q->outstanding_bytes;
 
 	if (outstanding < sack_a_rwnd)
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -5302,7 +5302,8 @@ sctp_disposition_t sctp_sf_do_6_3_3_rtx(
 	SCTP_INC_STATS(SCTP_MIB_T3_RTX_EXPIREDS);
 
 	if (asoc->overall_error_count >= asoc->max_retrans) {
-		if (asoc->state == SCTP_STATE_SHUTDOWN_PENDING) {
+		if (asoc->peer.zero_window_announced &&
+		    asoc->state == SCTP_STATE_SHUTDOWN_PENDING) {
 			/*
 			 * We are here likely because the receiver had its rwnd
 			 * closed for a while and we have not been able to

[PATCH 3.2 15/70] spi: fix parent-device reference leak

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 157f38f993919b648187ba341bfb05d0e91ad2f6 upstream.

Fix parent-device reference leak due to SPI-core taking an unnecessary
reference to the parent when allocating the master structure, a
reference that was never released.

Note that driver core takes its own reference to the parent when the
master device is registered.

Fixes: 49dce689ad4e ("spi doesn't need class_device")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/spi/spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -554,7 +554,7 @@ struct spi_master *spi_alloc_master(stru
 
 	device_initialize(&master->dev);
 	master->dev.class = &spi_master_class;
-	master->dev.parent = get_device(dev);
+	master->dev.parent = dev;
 	spi_master_set_devdata(master, &master[1]);
 
 	return master;

[PATCH 3.2 08/70] tty: Fix GPF in flush_to_ldisc()

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Hurley <peter@hurleysoftware.com>

commit 9ce119f318ba1a07c29149301f1544b6c4bea52a upstream.

A line discipline which does not define a receive_buf() method can
can cause a GPF if data is ever received [1]. Oddly, this was known
to the author of n_tracesink in 2011, but never fixed.

[1] GPF report
    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: [<          (null)>]           (null)
    PGD 3752d067 PUD 37a7b067 PMD 0
    Oops: 0010 [#1] SMP KASAN
    Modules linked in:
    CPU: 2 PID: 148 Comm: kworker/u10:2 Not tainted 4.4.0-rc2+ #51
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: events_unbound flush_to_ldisc
    task: ffff88006da94440 ti: ffff88006db60000 task.ti: ffff88006db60000
    RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
    RSP: 0018:ffff88006db67b50  EFLAGS: 00010246
    RAX: 0000000000000102 RBX: ffff88003ab32f88 RCX: 0000000000000102
    RDX: 0000000000000000 RSI: ffff88003ab330a6 RDI: ffff88003aabd388
    RBP: ffff88006db67c48 R08: ffff88003ab32f9c R09: ffff88003ab31fb0
    R10: ffff88003ab32fa8 R11: 0000000000000000 R12: dffffc0000000000
    R13: ffff88006db67c20 R14: ffffffff863df820 R15: ffff88003ab31fb8
    FS:  0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 0000000000000000 CR3: 0000000037938000 CR4: 00000000000006e0
    Stack:
     ffffffff829f46f1 ffff88006da94bf8 ffff88006da94bf8 0000000000000000
     ffff88003ab31fb0 ffff88003aabd438 ffff88003ab31ff8 ffff88006430fd90
     ffff88003ab32f9c ffffed0007557a87 1ffff1000db6cf78 ffff88003ab32078
    Call Trace:
     [<ffffffff8127cf91>] process_one_work+0x8f1/0x17a0 kernel/workqueue.c:2030
     [<ffffffff8127df14>] worker_thread+0xd4/0x1180 kernel/workqueue.c:2162
     [<ffffffff8128faaf>] kthread+0x1cf/0x270 drivers/block/aoe/aoecmd.c:1302
     [<ffffffff852a7c2f>] ret_from_fork+0x3f/0x70 arch/x86/entry/entry_64.S:468
    Code:  Bad RIP value.
    RIP  [<          (null)>]           (null)
     RSP <ffff88006db67b50>
    CR2: 0000000000000000
    ---[ end trace a587f8947e54d6ea ]---

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -442,10 +442,12 @@ static void flush_to_ldisc(struct work_s
 			char_buf = head->char_buf_ptr + head->read;
 			flag_buf = head->flag_buf_ptr + head->read;
 			head->read += count;
-			spin_unlock_irqrestore(&tty->buf.lock, flags);
-			disc->ops->receive_buf(tty, char_buf,
+			if (disc->ops->receive_buf) {
+				spin_unlock_irqrestore(&tty->buf.lock, flags);
+				disc->ops->receive_buf(tty, char_buf,
 							flag_buf, count);
-			spin_lock_irqsave(&tty->buf.lock, flags);
+				spin_lock_irqsave(&tty->buf.lock, flags);
+			}
 		}
 		clear_bit(TTY_FLUSHING, &tty->flags);
 	}

[PATCH 3.2 11/70] ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Anssi Hannula <anssi.hannula@iki.fi>

commit 42e3121d90f42e57f6dbd6083dff2f57b3ec7daa upstream.

AudioQuest DragonFly DAC reports a volume control range of 0..50
(0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which
is obviously incorrect and would cause software using the dB information
in e.g. volume sliders to have a massive volume difference in 100..102%
range.

Commit 2d1cb7f658fb ("ALSA: usb-audio: add dB range mapping for some
devices") added a dB range mapping for it with range 0..50 dB.

However, the actual volume mapping seems to be neither linear volume nor
linear dB scale, but instead quite close to the cubic mapping e.g.
alsamixer uses, with a range of approx. -53...0 dB.

Replace the previous quirk with a custom dB mapping based on some basic
output measurements, using a 10-item range TLV (which will still fit in
alsa-lib MAX_TLV_RANGE_SIZE).

Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the
range is 0..50, so if this gets fixed/changed in later HW revisions it
will no longer be applied.

v2: incorporated Takashi Iwai's suggestion for the quirk application
method

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: open-code usb_audio_info()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/usb/mixer.c        |  2 ++
 sound/usb/mixer_maps.c   | 12 ------------
 sound/usb/mixer_quirks.c | 37 +++++++++++++++++++++++++++++++++++++
 sound/usb/mixer_quirks.h |  4 ++++
 4 files changed, 43 insertions(+), 12 deletions(-)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1213,6 +1213,8 @@ static void build_feature_ctl(struct mix
 		break;
 	}
 
+	snd_usb_mixer_fu_apply_quirk(state->mixer, cval, unitid, kctl);
+
 	range = (cval->max - cval->min) / cval->res;
 	/* Are there devices with volume range more than 255? I use a bit more
 	 * to be sure. 384 is a resolution magic number found on Logitech
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -319,13 +319,6 @@ static struct usbmix_name_map bose_compa
 	{ 0 }	/* terminator */
 };
 
-/* Dragonfly DAC 1.2, the dB conversion factor is 1 instead of 256 */
-static struct usbmix_dB_map dragonfly_1_2_dB = {0, 5000};
-static struct usbmix_name_map dragonfly_1_2_map[] = {
-	{ 7, NULL, .dB = &dragonfly_1_2_dB },
-	{ 0 }	/* terminator */
-};
-
 /*
  * Control map entries
  */
@@ -413,11 +406,6 @@ static struct usbmix_ctl_map usbmix_ctl_
 		.id = USB_ID(0x05a7, 0x1020),
 		.map = bose_companion5_map,
 	},
-	{
-		/* Dragonfly DAC 1.2 */
-		.id = USB_ID(0x21b4, 0x0081),
-		.map = dragonfly_1_2_map,
-	},
 	{ 0 } /* terminator */
 };
 
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -34,6 +34,7 @@
 #include <sound/control.h>
 #include <sound/hwdep.h>
 #include <sound/info.h>
+#include <sound/tlv.h>
 
 #include "usbaudio.h"
 #include "mixer.h"
@@ -681,4 +682,40 @@ void snd_usb_mixer_rc_memory_change(stru
 		break;
 	}
 }
+
+static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
+					 struct snd_kcontrol *kctl)
+{
+	/* Approximation using 10 ranges based on output measurement on hw v1.2.
+	 * This seems close to the cubic mapping e.g. alsamixer uses. */
+	static const DECLARE_TLV_DB_RANGE(scale,
+		 0,  1, TLV_DB_MINMAX_ITEM(-5300, -4970),
+		 2,  5, TLV_DB_MINMAX_ITEM(-4710, -4160),
+		 6,  7, TLV_DB_MINMAX_ITEM(-3884, -3710),
+		 8, 14, TLV_DB_MINMAX_ITEM(-3443, -2560),
+		15, 16, TLV_DB_MINMAX_ITEM(-2475, -2324),
+		17, 19, TLV_DB_MINMAX_ITEM(-2228, -2031),
+		20, 26, TLV_DB_MINMAX_ITEM(-1910, -1393),
+		27, 31, TLV_DB_MINMAX_ITEM(-1322, -1032),
+		32, 40, TLV_DB_MINMAX_ITEM(-968, -490),
+		41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
+	);
+
+	dev_info(&mixer->chip->dev->dev, "applying DragonFly dB scale quirk\n");
+	kctl->tlv.p = scale;
+	kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+	kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+}
+
+void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
+				  struct usb_mixer_elem_info *cval, int unitid,
+				  struct snd_kcontrol *kctl)
+{
+	switch (mixer->chip->usb_id) {
+	case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
+		if (unitid == 7 && cval->min == 0 && cval->max == 50)
+			snd_dragonfly_quirk_db_scale(mixer, kctl);
+		break;
+	}
+}
 
--- a/sound/usb/mixer_quirks.h
+++ b/sound/usb/mixer_quirks.h
@@ -9,5 +9,9 @@ void snd_emuusb_set_samplerate(struct sn
 void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
 				    int unitid);
 
+void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
+				  struct usb_mixer_elem_info *cval, int unitid,
+				  struct snd_kcontrol *kctl);
+
 #endif /* SND_USB_MIXER_QUIRKS_H */
 

[PATCH 3.2 09/70] ALSA: tlv: compute TLV_*_ITEM lengths automatically

[Ben Hutchings]

3.2.76-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit b5b9eb546762c4015c67c31364a6ec6f83fd2ada upstream.

Add helper macros with a little bit of preprocessor magic to
automatically compute the length of a TLV item.  This lets us avoid
having to compute this by hand, and will allow to use items that do
not use a fixed length.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/sound/tlv.h | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/include/sound/tlv.h b/include/sound/tlv.h
index 7067e2d..137d165 100644
--- a/include/sound/tlv.h
+++ b/include/sound/tlv.h
@@ -38,21 +38,26 @@
 #define SNDRV_CTL_TLVT_DB_MINMAX 4	/* dB scale with min/max */
 #define SNDRV_CTL_TLVT_DB_MINMAX_MUTE 5	/* dB scale with min/max with mute */
 
+#define TLV_ITEM(type, ...) \
+	(type), TLV_LENGTH(__VA_ARGS__), __VA_ARGS__
+#define TLV_LENGTH(...) \
+	((unsigned int)sizeof((const unsigned int[]) { __VA_ARGS__ }))
+
 #define TLV_DB_SCALE_MASK	0xffff
 #define TLV_DB_SCALE_MUTE	0x10000
 #define TLV_DB_SCALE_ITEM(min, step, mute)			\
-	SNDRV_CTL_TLVT_DB_SCALE, 2 * sizeof(unsigned int),	\
-	(min), ((step) & TLV_DB_SCALE_MASK) | ((mute) ? TLV_DB_SCALE_MUTE : 0)
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_SCALE,			\
+		 (min),					\
+		 ((step) & TLV_DB_SCALE_MASK) |		\
+			((mute) ? TLV_DB_SCALE_MUTE : 0))
 #define DECLARE_TLV_DB_SCALE(name, min, step, mute) \
 	unsigned int name[] = { TLV_DB_SCALE_ITEM(min, step, mute) }
 
 /* dB scale specified with min/max values instead of step */
 #define TLV_DB_MINMAX_ITEM(min_dB, max_dB)			\
-	SNDRV_CTL_TLVT_DB_MINMAX, 2 * sizeof(unsigned int),	\
-	(min_dB), (max_dB)
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_MINMAX, (min_dB), (max_dB))
 #define TLV_DB_MINMAX_MUTE_ITEM(min_dB, max_dB)			\
-	SNDRV_CTL_TLVT_DB_MINMAX_MUTE, 2 * sizeof(unsigned int),	\
-	(min_dB), (max_dB)
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_MINMAX_MUTE, (min_dB), (max_dB))
 #define DECLARE_TLV_DB_MINMAX(name, min_dB, max_dB) \
 	unsigned int name[] = { TLV_DB_MINMAX_ITEM(min_dB, max_dB) }
 #define DECLARE_TLV_DB_MINMAX_MUTE(name, min_dB, max_dB) \
@@ -60,8 +65,7 @@
 
 /* linear volume between min_dB and max_dB (.01dB unit) */
 #define TLV_DB_LINEAR_ITEM(min_dB, max_dB)		    \
-	SNDRV_CTL_TLVT_DB_LINEAR, 2 * sizeof(unsigned int), \
-	(min_dB), (max_dB)
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_LINEAR, (min_dB), (max_dB))
 #define DECLARE_TLV_DB_LINEAR(name, min_dB, max_dB)	\
 	unsigned int name[] = { TLV_DB_LINEAR_ITEM(min_dB, max_dB) }
 

Re: [PATCH 3.2 00/70] 3.2.76-rc1 review

[Ben Hutchings]

[-- Attachment #1.1: Type: text/plain, Size: 167 bytes --]

This is the combined diff for 3.2.76-rc1 relative to 3.2.75.

Ben.

-- 
Ben Hutchings
A free society is one where it is safe to be unpopular. - Adlai Stevenson

[-- Attachment #1.2: linux-3.2.76-rc1.patch --]
[-- Type: text/x-patch, Size: 74881 bytes --]

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 99d4e44..4341d87 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -22,6 +22,17 @@ Supported adapters:
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
   * Intel Lynx Point-LP (PCH)
+  * Intel Avoton (SOC)
+  * Intel Wellsburg (PCH)
+  * Intel Coleto Creek (PCH)
+  * Intel Wildcat Point (PCH)
+  * Intel Wildcat Point-LP (PCH)
+  * Intel BayTrail (SOC)
+  * Intel Sunrise Point-H (PCH)
+  * Intel Sunrise Point-LP (PCH)
+  * Intel DNV (SOC)
+  * Intel Broxton (SOC)
+  * Intel Lewisburg (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Makefile b/Makefile
index 1fbb6f4..f032854 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
-SUBLEVEL = 75
-EXTRAVERSION =
+SUBLEVEL = 76
+EXTRAVERSION = -rc1
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 1d39bea..532a330 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -192,6 +192,7 @@ illegal_syscall:
 	sll	t1, t0, 3
 	beqz	v0, einval
 	lw	t2, sys_call_table(t1)		# syscall routine
+	sw	a0, PT_R2(sp)			# call routine directly on restart
 
 	/* Some syscalls like execve get their arguments from struct pt_regs
 	   and claim zero arguments in the syscall table. Thus we have to
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index a56175b..6651759 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -180,6 +180,7 @@ LEAF(sys32_syscall)
 	dsll	t1, t0, 3
 	beqz	v0, einval
 	ld	t2, sys_call_table(t1)		# syscall routine
+	sd	a0, PT_R2(sp)		# call routine directly on restart
 
 	move	a0, a1			# shift argument registers
 	move	a1, a2
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 12c1ed3..f7c8352 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -468,6 +468,55 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	return 1;
 }
 
+/*
+ * Check how the syscall number gets loaded into %r20 within
+ * the delay branch in userspace and adjust as needed.
+ */
+
+static void check_syscallno_in_delay_branch(struct pt_regs *regs)
+{
+	u32 opcode, source_reg;
+	u32 __user *uaddr;
+	int err;
+
+	/* Usually we don't have to restore %r20 (the system call number)
+	 * because it gets loaded in the delay slot of the branch external
+	 * instruction via the ldi instruction.
+	 * In some cases a register-to-register copy instruction might have
+	 * been used instead, in which case we need to copy the syscall
+	 * number into the source register before returning to userspace.
+	 */
+
+	/* A syscall is just a branch, so all we have to do is fiddle the
+	 * return pointer so that the ble instruction gets executed again.
+	 */
+	regs->gr[31] -= 8; /* delayed branching */
+
+	/* Get assembler opcode of code in delay branch */
+	uaddr = (unsigned int *) ((regs->gr[31] & ~3) + 4);
+	err = get_user(opcode, uaddr);
+	if (err)
+		return;
+
+	/* Check if delay branch uses "ldi int,%r20" */
+	if ((opcode & 0xffff0000) == 0x34140000)
+		return;	/* everything ok, just return */
+
+	/* Check if delay branch uses "nop" */
+	if (opcode == INSN_NOP)
+		return;
+
+	/* Check if delay branch uses "copy %rX,%r20" */
+	if ((opcode & 0xffe0ffff) == 0x08000254) {
+		source_reg = (opcode >> 16) & 31;
+		regs->gr[source_reg] = regs->gr[20];
+		return;
+	}
+
+	pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n",
+		current->comm, task_pid_nr(current), opcode);
+}
+
 static inline void
 syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 {
@@ -489,10 +538,7 @@ syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 		}
 		/* fallthrough */
 	case -ERESTARTNOINTR:
-		/* A syscall is just a branch, so all
-		 * we have to do is fiddle the return pointer.
-		 */
-		regs->gr[31] -= 8; /* delayed branching */
+		check_syscallno_in_delay_branch(regs);
 		/* Preserve original r28. */
 		regs->gr[28] = regs->orig_r28;
 		break;
@@ -543,18 +589,12 @@ insert_restart_trampoline(struct pt_regs *regs)
 	}
 	case -ERESTARTNOHAND:
 	case -ERESTARTSYS:
-	case -ERESTARTNOINTR: {
-		/* Hooray for delayed branching.  We don't
-		 * have to restore %r20 (the system call
-		 * number) because it gets loaded in the delay
-		 * slot of the branch external instruction.
-		 */
-		regs->gr[31] -= 8;
+	case -ERESTARTNOINTR:
+		check_syscallno_in_delay_branch(regs);
 		/* Preserve original r28. */
 		regs->gr[28] = regs->orig_r28;
 
 		return;
-	}
 	default:
 		break;
 	}
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index 45df6d4..847ea15 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -1503,14 +1503,21 @@ static int print_insn(char *buffer, unsigned char *code, unsigned long addr)
 			}
 			if (separator)
 				ptr += sprintf(ptr, "%c", separator);
+			/*
+			 * Use four '%' characters below because of the
+			 * following two conversions:
+			 *
+			 *  1) sprintf: %%%%r -> %%r
+			 *  2) printk : %%r   -> %r
+			 */
 			if (operand->flags & OPERAND_GPR)
-				ptr += sprintf(ptr, "%%r%i", value);
+				ptr += sprintf(ptr, "%%%%r%i", value);
 			else if (operand->flags & OPERAND_FPR)
-				ptr += sprintf(ptr, "%%f%i", value);
+				ptr += sprintf(ptr, "%%%%f%i", value);
 			else if (operand->flags & OPERAND_AR)
-				ptr += sprintf(ptr, "%%a%i", value);
+				ptr += sprintf(ptr, "%%%%a%i", value);
 			else if (operand->flags & OPERAND_CR)
-				ptr += sprintf(ptr, "%%c%i", value);
+				ptr += sprintf(ptr, "%%%%c%i", value);
 			else if (operand->flags & OPERAND_PCREL)
 				ptr += sprintf(ptr, "%lx", (signed int) value
 								      + addr);
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index ab98fe5..aa21aa1 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -437,6 +437,7 @@ void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_s
 	u8 saved_mode;
 	if (hpet_legacy_start) {
 		/* save existing mode for later reenablement */
+		WARN_ON(channel != 0);
 		saved_mode = kvm->arch.vpit->pit_state.channels[0].mode;
 		kvm->arch.vpit->pit_state.channels[0].mode = 0xff; /* disable timer */
 		pit_load_count(kvm, channel, val);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0e3289b..80c6d68 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3434,10 +3434,11 @@ static int kvm_vm_ioctl_get_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 {
 	int r = 0;
-
+	int i;
 	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state));
-	kvm_pit_load_count(kvm, 0, ps->channels[0].count, 0);
+	for (i = 0; i < 3; i++)
+		kvm_pit_load_count(kvm, i, ps->channels[i].count, 0);
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
@@ -3458,6 +3459,7 @@ static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
 static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
 {
 	int r = 0, start = 0;
+	int i;
 	u32 prev_legacy, cur_legacy;
 	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	prev_legacy = kvm->arch.vpit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY;
@@ -3467,7 +3469,9 @@ static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
 	memcpy(&kvm->arch.vpit->pit_state.channels, &ps->channels,
 	       sizeof(kvm->arch.vpit->pit_state.channels));
 	kvm->arch.vpit->pit_state.flags = ps->flags;
-	kvm_pit_load_count(kvm, 0, kvm->arch.vpit->pit_state.channels[0].count, start);
+	for (i = 0; i < 3; i++)
+		kvm_pit_load_count(kvm, i, kvm->arch.vpit->pit_state.channels[i].count,
+				   start && i == 0);
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index d53a30b..6eb6eb1 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -280,12 +280,12 @@ static int ablkcipher_walk_first(struct ablkcipher_request *req,
 	if (WARN_ON_ONCE(in_irq()))
 		return -EDEADLK;
 
+	walk->iv = req->info;
 	walk->nbytes = walk->total;
 	if (unlikely(!walk->total))
 		return 0;
 
 	walk->iv_buffer = NULL;
-	walk->iv = req->info;
 	if (unlikely(((unsigned long)walk->iv & alignmask))) {
 		int err = ablkcipher_copy_iv(walk, tfm, alignmask);
 		if (err)
diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c
index 04f0f38..3041504 100644
--- a/crypto/blkcipher.c
+++ b/crypto/blkcipher.c
@@ -329,12 +329,12 @@ static int blkcipher_walk_first(struct blkcipher_desc *desc,
 	if (WARN_ON_ONCE(in_irq()))
 		return -EDEADLK;
 
+	walk->iv = desc->info;
 	walk->nbytes = walk->total;
 	if (unlikely(!walk->total))
 		return 0;
 
 	walk->buffer = NULL;
-	walk->iv = desc->info;
 	if (unlikely(((unsigned long)walk->iv & alignmask))) {
 		int err = blkcipher_copy_iv(walk, tfm, alignmask);
 		if (err)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e2958aa..7117457 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -324,6 +324,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */
 	{ PCI_VDEVICE(INTEL, 0x8d04), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d06), board_ahci }, /* Wellsburg RAID */
@@ -348,15 +350,29 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */
 	{ PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0xa102), board_ahci }, /* Sunrise Point-H AHCI */
 	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
-	{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
+	{ PCI_VDEVICE(INTEL, 0xa106), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
 	{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
+	{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa182), board_ahci }, /* Lewisburg AHCI*/
+	{ PCI_VDEVICE(INTEL, 0xa184), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa186), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa18e), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa202), board_ahci }, /* Lewisburg AHCI*/
+	{ PCI_VDEVICE(INTEL, 0xa204), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/
+	{ PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+	/* JMicron 362B and 362C have an AHCI function with IDE class code */
+	{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
+	{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
 
 	/* ATI */
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -494,6 +510,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 on some Gigabyte */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0),
 	  .driver_data = board_ahci_yes_fbs },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a2), 	/* 88se91a2 */
+	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index f67985d..2c6205e 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -238,11 +238,11 @@ static inline void blkif_get_x86_32_req(struct blkif_request *dst,
 					struct blkif_x86_32_request *src)
 {
 	int i, n = BLKIF_MAX_SEGMENTS_PER_REQUEST;
-	dst->operation = src->operation;
+	dst->operation = ACCESS_ONCE(src->operation);
 	dst->nr_segments = src->nr_segments;
 	dst->handle = src->handle;
 	dst->id = src->id;
-	switch (src->operation) {
+	switch (dst->operation) {
 	case BLKIF_OP_READ:
 	case BLKIF_OP_WRITE:
 	case BLKIF_OP_WRITE_BARRIER:
@@ -267,11 +267,11 @@ static inline void blkif_get_x86_64_req(struct blkif_request *dst,
 					struct blkif_x86_64_request *src)
 {
 	int i, n = BLKIF_MAX_SEGMENTS_PER_REQUEST;
-	dst->operation = src->operation;
+	dst->operation = ACCESS_ONCE(src->operation);
 	dst->nr_segments = src->nr_segments;
 	dst->handle = src->handle;
 	dst->id = src->id;
-	switch (src->operation) {
+	switch (dst->operation) {
 	case BLKIF_OP_READ:
 	case BLKIF_OP_WRITE:
 	case BLKIF_OP_WRITE_BARRIER:
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 1331740..a03e849 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -873,6 +873,7 @@ static int cdrom_is_dvd_rw(struct cdrom_device_info *cdi)
 	switch (cdi->mmc3_profile) {
 	case 0x12:	/* DVD-RAM	*/
 	case 0x1A:	/* DVD+RW	*/
+	case 0x43:	/* BD-RE	*/
 		return 0;
 	default:
 		return 1;
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
index 42f5a2b..931a8a9 100644
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -51,6 +51,11 @@ static void radeon_hotplug_work_func(struct work_struct *work)
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
 
+	/* we can race here at startup, some boards seem to trigger
+	 * hotplug irqs when they shouldn't. */
+	if (!rdev->mode_info.mode_config_initialized)
+		return;
+
 	mutex_lock(&mode_config->mutex);
 	if (mode_config->num_connector) {
 		list_for_each_entry(connector, &mode_config->connector_list, head)
diff --git a/drivers/hid/hid-dr.c b/drivers/hid/hid-dr.c
index e832f44..b50dab3 100644
--- a/drivers/hid/hid-dr.c
+++ b/drivers/hid/hid-dr.c
@@ -236,6 +236,58 @@ static __u8 pid0011_rdesc_fixed[] = {
 	0xC0                /*  End Collection                  */
 };
 
+static __u8 pid0006_rdesc_fixed[] = {
+	0x05, 0x01,        /* Usage Page (Generic Desktop)	*/
+	0x09, 0x04,        /* Usage (Joystick)			*/
+	0xA1, 0x01,        /* Collection (Application)		*/
+	0xA1, 0x02,        /*   Collection (Logical)		*/
+	0x75, 0x08,        /*     Report Size (8)		*/
+	0x95, 0x05,        /*     Report Count (5)		*/
+	0x15, 0x00,        /*     Logical Minimum (0)		*/
+	0x26, 0xFF, 0x00,  /*     Logical Maximum (255)		*/
+	0x35, 0x00,        /*     Physical Minimum (0)		*/
+	0x46, 0xFF, 0x00,  /*     Physical Maximum (255)	*/
+	0x09, 0x30,        /*     Usage (X)			*/
+	0x09, 0x33,        /*     Usage (Ry)			*/
+	0x09, 0x32,        /*     Usage (Z)			*/
+	0x09, 0x31,        /*     Usage (Y)			*/
+	0x09, 0x34,        /*     Usage (Ry)			*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0x75, 0x04,        /*     Report Size (4)		*/
+	0x95, 0x01,        /*     Report Count (1)		*/
+	0x25, 0x07,        /*     Logical Maximum (7)		*/
+	0x46, 0x3B, 0x01,  /*     Physical Maximum (315)	*/
+	0x65, 0x14,        /*     Unit (Centimeter)		*/
+	0x09, 0x39,        /*     Usage (Hat switch)		*/
+	0x81, 0x42,        /*     Input (Variable)		*/
+	0x65, 0x00,        /*     Unit (None)			*/
+	0x75, 0x01,        /*     Report Size (1)		*/
+	0x95, 0x0C,        /*     Report Count (12)		*/
+	0x25, 0x01,        /*     Logical Maximum (1)		*/
+	0x45, 0x01,        /*     Physical Maximum (1)		*/
+	0x05, 0x09,        /*     Usage Page (Button)		*/
+	0x19, 0x01,        /*     Usage Minimum (0x01)		*/
+	0x29, 0x0C,        /*     Usage Maximum (0x0C)		*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0x06, 0x00, 0xFF,  /*     Usage Page (Vendor Defined)	*/
+	0x75, 0x01,        /*     Report Size (1)		*/
+	0x95, 0x08,        /*     Report Count (8)		*/
+	0x25, 0x01,        /*     Logical Maximum (1)		*/
+	0x45, 0x01,        /*     Physical Maximum (1)		*/
+	0x09, 0x01,        /*     Usage (0x01)			*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0xC0,              /*   End Collection			*/
+	0xA1, 0x02,        /*   Collection (Logical)		*/
+	0x75, 0x08,        /*     Report Size (8)		*/
+	0x95, 0x07,        /*     Report Count (7)		*/
+	0x46, 0xFF, 0x00,  /*     Physical Maximum (255)	*/
+	0x26, 0xFF, 0x00,  /*     Logical Maximum (255)		*/
+	0x09, 0x02,        /*     Usage (0x02)			*/
+	0x91, 0x02,        /*     Output (Variable)		*/
+	0xC0,              /*   End Collection			*/
+	0xC0               /* End Collection			*/
+};
+
 static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 				unsigned int *rsize)
 {
@@ -246,6 +298,12 @@ static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 			*rsize = sizeof(pid0011_rdesc_fixed);
 		}
 		break;
+	case 0x0006:
+		if (*rsize == sizeof(pid0006_rdesc_fixed)) {
+			rdesc = pid0006_rdesc_fixed;
+			*rsize = sizeof(pid0006_rdesc_fixed);
+		}
+		break;
 	}
 	return rdesc;
 }
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 949ea640..ca1b2a4 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -105,6 +105,17 @@ config I2C_I801
 	    Panther Point (PCH)
 	    Lynx Point (PCH)
 	    Lynx Point-LP (PCH)
+	    Avoton (SOC)
+	    Wellsburg (PCH)
+	    Coleto Creek (PCH)
+	    Wildcat Point (PCH)
+	    Wildcat Point-LP (PCH)
+	    BayTrail (SOC)
+	    Sunrise Point-H (PCH)
+	    Sunrise Point-LP (PCH)
+	    DNV (SOC)
+	    Broxton (SOC)
+	    Lewisburg (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 817d025..9ce14ac 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -22,48 +22,63 @@
 */
 
 /*
-  Supports the following Intel I/O Controller Hubs (ICH):
-
-                                  I/O                     Block   I2C
-                                  region  SMBus   Block   proc.   block
-  Chip name             PCI ID    size    PEC     buffer  call    read
-  ----------------------------------------------------------------------
-  82801AA  (ICH)        0x2413     16      no      no      no      no
-  82801AB  (ICH0)       0x2423     16      no      no      no      no
-  82801BA  (ICH2)       0x2443     16      no      no      no      no
-  82801CA  (ICH3)       0x2483     32     soft     no      no      no
-  82801DB  (ICH4)       0x24c3     32     hard     yes     no      no
-  82801E   (ICH5)       0x24d3     32     hard     yes     yes     yes
-  6300ESB               0x25a4     32     hard     yes     yes     yes
-  82801F   (ICH6)       0x266a     32     hard     yes     yes     yes
-  6310ESB/6320ESB       0x269b     32     hard     yes     yes     yes
-  82801G   (ICH7)       0x27da     32     hard     yes     yes     yes
-  82801H   (ICH8)       0x283e     32     hard     yes     yes     yes
-  82801I   (ICH9)       0x2930     32     hard     yes     yes     yes
-  EP80579 (Tolapai)     0x5032     32     hard     yes     yes     yes
-  ICH10                 0x3a30     32     hard     yes     yes     yes
-  ICH10                 0x3a60     32     hard     yes     yes     yes
-  5/3400 Series (PCH)   0x3b30     32     hard     yes     yes     yes
-  6 Series (PCH)        0x1c22     32     hard     yes     yes     yes
-  Patsburg (PCH)        0x1d22     32     hard     yes     yes     yes
-  Patsburg (PCH) IDF    0x1d70     32     hard     yes     yes     yes
-  Patsburg (PCH) IDF    0x1d71     32     hard     yes     yes     yes
-  Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
-  DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
-  Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
-  Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
-  Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
-
-  Features supported by this driver:
-  Software PEC                     no
-  Hardware PEC                     yes
-  Block buffer                     yes
-  Block process call transaction   no
-  I2C block read transaction       yes  (doesn't use the block buffer)
-  Slave mode                       no
-
-  See the file Documentation/i2c/busses/i2c-i801 for details.
-*/
+ * Supports the following Intel I/O Controller Hubs (ICH):
+ *
+ *					I/O			Block	I2C
+ *					region	SMBus	Block	proc.	block
+ * Chip name			PCI ID	size	PEC	buffer	call	read
+ * ---------------------------------------------------------------------------
+ * 82801AA (ICH)		0x2413	16	no	no	no	no
+ * 82801AB (ICH0)		0x2423	16	no	no	no	no
+ * 82801BA (ICH2)		0x2443	16	no	no	no	no
+ * 82801CA (ICH3)		0x2483	32	soft	no	no	no
+ * 82801DB (ICH4)		0x24c3	32	hard	yes	no	no
+ * 82801E (ICH5)		0x24d3	32	hard	yes	yes	yes
+ * 6300ESB			0x25a4	32	hard	yes	yes	yes
+ * 82801F (ICH6)		0x266a	32	hard	yes	yes	yes
+ * 6310ESB/6320ESB		0x269b	32	hard	yes	yes	yes
+ * 82801G (ICH7)		0x27da	32	hard	yes	yes	yes
+ * 82801H (ICH8)		0x283e	32	hard	yes	yes	yes
+ * 82801I (ICH9)		0x2930	32	hard	yes	yes	yes
+ * EP80579 (Tolapai)		0x5032	32	hard	yes	yes	yes
+ * ICH10			0x3a30	32	hard	yes	yes	yes
+ * ICH10			0x3a60	32	hard	yes	yes	yes
+ * 5/3400 Series (PCH)		0x3b30	32	hard	yes	yes	yes
+ * 6 Series (PCH)		0x1c22	32	hard	yes	yes	yes
+ * Patsburg (PCH)		0x1d22	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d70	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d71	32	hard	yes	yes	yes
+ * Patsburg (PCH) IDF		0x1d72	32	hard	yes	yes	yes
+ * DH89xxCC (PCH)		0x2330	32	hard	yes	yes	yes
+ * Panther Point (PCH)		0x1e22	32	hard	yes	yes	yes
+ * Lynx Point (PCH)		0x8c22	32	hard	yes	yes	yes
+ * Lynx Point-LP (PCH)		0x9c22	32	hard	yes	yes	yes
+ * Avoton (SOC)			0x1f3c	32	hard	yes	yes	yes
+ * Wellsburg (PCH)		0x8d22	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7d	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7e	32	hard	yes	yes	yes
+ * Wellsburg (PCH) MS		0x8d7f	32	hard	yes	yes	yes
+ * Coleto Creek (PCH)		0x23b0	32	hard	yes	yes	yes
+ * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
+ * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
+ * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
+ * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
+ * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
+ * DNV (SOC)			0x19df	32	hard	yes	yes	yes
+ * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
+ * Lewisburg (PCH)		0xa1a3	32	hard	yes	yes	yes
+ * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
+ *
+ * Features supported by this driver:
+ * Software PEC				no
+ * Hardware PEC				yes
+ * Block buffer				yes
+ * Block process call transaction	no
+ * I2C block read transaction		yes (doesn't use the block buffer)
+ * Slave mode				no
+ *
+ * See the file Documentation/i2c/busses/i2c-i801 for details.
+ */
 
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -138,17 +153,33 @@
 				 SMBHSTSTS_INTR)
 
 /* Older devices have their ID defined in <linux/pci_ids.h> */
-#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS		0x0f12
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS		0x2292
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS		0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS		0x1d22
 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0	0x1d70
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1	0x1d71
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2	0x1d72
-#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
-#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
-#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
-#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
-#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0		0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1		0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2		0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS		0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS		0x1f3c
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS		0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS		0x23b0
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS		0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS		0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0		0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1		0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
+#define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
+#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -639,6 +670,22 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
 	{ 0, }
 };
 
@@ -786,6 +833,9 @@ static int __devinit i801_probe(struct pci_dev *dev,
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
 		priv->features |= FEATURE_IDF;
 		/* fall through */
 	default:
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 86a5c4f..cf3c1d4 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -371,19 +371,23 @@ static void gigaset_freecshw(struct cardstate *cs)
 	tasklet_kill(&cs->write_tasklet);
 	if (!cs->hw.ser)
 		return;
-	dev_set_drvdata(&cs->hw.ser->dev.dev, NULL);
 	platform_device_unregister(&cs->hw.ser->dev);
-	kfree(cs->hw.ser);
-	cs->hw.ser = NULL;
 }
 
 static void gigaset_device_release(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct cardstate *cs = dev_get_drvdata(dev);
 
 	/* adapted from platform_device_release() in drivers/base/platform.c */
 	kfree(dev->platform_data);
 	kfree(pdev->resource);
+
+	if (!cs)
+		return;
+	dev_set_drvdata(dev, NULL);
+	kfree(cs->hw.ser);
+	cs->hw.ser = NULL;
 }
 
 /*
diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index d2ffb1d..6614b28 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -1156,7 +1156,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
 
 	if (ipac->type & IPAC_TYPE_IPACX) {
 		ista = ReadIPAC(ipac, ISACX_ISTA);
-		while (ista && cnt--) {
+		while (ista && --cnt) {
 			pr_debug("%s: ISTA %02x\n", ipac->name, ista);
 			if (ista & IPACX__ICA)
 				ipac_irq(&ipac->hscx[0], ista);
@@ -1168,7 +1168,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
 		}
 	} else if (ipac->type & IPAC_TYPE_IPAC) {
 		ista = ReadIPAC(ipac, IPAC_ISTA);
-		while (ista && cnt--) {
+		while (ista && --cnt) {
 			pr_debug("%s: ISTA %02x\n", ipac->name, ista);
 			if (ista & (IPAC__ICD | IPAC__EXD)) {
 				istad = ReadISAC(isac, ISAC_ISTA);
@@ -1186,7 +1186,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
 			ista = ReadIPAC(ipac, IPAC_ISTA);
 		}
 	} else if (ipac->type & IPAC_TYPE_HSCX) {
-		while (cnt) {
+		while (--cnt) {
 			ista = ReadIPAC(ipac, IPAC_ISTAB + ipac->hscx[1].off);
 			pr_debug("%s: B2 ISTA %02x\n", ipac->name, ista);
 			if (ista)
@@ -1197,7 +1197,6 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
 				mISDNisac_irq(isac, istad);
 			if (0 == (ista | istad))
 				break;
-			cnt--;
 		}
 	}
 	if (cnt > maxloop) /* only for ISAC/HSCX without PCI IRQ test */
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index e49208d..9842fd9 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1499,8 +1499,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	txdesc = &mdp->tx_ring[entry];
 	/* soft swap. */
 	if (!mdp->cd->hw_swap)
-		sh_eth_soft_swap(phys_to_virt(ALIGN(txdesc->addr, 4)),
-				 skb->len + 2);
+		sh_eth_soft_swap(PTR_ALIGN(skb->data, 4), skb->len + 2);
 	txdesc->addr = dma_map_single(&ndev->dev, skb->data, skb->len,
 				      DMA_TO_DEVICE);
 	if (skb->len < ETHERSMALL)
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index b2528f6..7b71257 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -406,17 +406,17 @@ static struct netbk_rx_meta *get_next_rx_buffer(struct xenvif *vif,
 						struct netrx_pending_operations *npo)
 {
 	struct netbk_rx_meta *meta;
-	struct xen_netif_rx_request *req;
+	struct xen_netif_rx_request req;
 
-	req = RING_GET_REQUEST(&vif->rx, vif->rx.req_cons++);
+	RING_COPY_REQUEST(&vif->rx, vif->rx.req_cons++, &req);
 
 	meta = npo->meta + npo->meta_prod++;
 	meta->gso_size = 0;
 	meta->size = 0;
-	meta->id = req->id;
+	meta->id = req.id;
 
 	npo->copy_off = 0;
-	npo->copy_gref = req->gref;
+	npo->copy_gref = req.gref;
 
 	return meta;
 }
@@ -518,7 +518,7 @@ static int netbk_gop_skb(struct sk_buff *skb,
 	struct xenvif *vif = netdev_priv(skb->dev);
 	int nr_frags = skb_shinfo(skb)->nr_frags;
 	int i;
-	struct xen_netif_rx_request *req;
+	struct xen_netif_rx_request req;
 	struct netbk_rx_meta *meta;
 	unsigned char *data;
 	int head = 1;
@@ -528,14 +528,14 @@ static int netbk_gop_skb(struct sk_buff *skb,
 
 	/* Set up a GSO prefix descriptor, if necessary */
 	if (skb_shinfo(skb)->gso_size && vif->gso_prefix) {
-		req = RING_GET_REQUEST(&vif->rx, vif->rx.req_cons++);
+		RING_COPY_REQUEST(&vif->rx, vif->rx.req_cons++, &req);
 		meta = npo->meta + npo->meta_prod++;
 		meta->gso_size = skb_shinfo(skb)->gso_size;
 		meta->size = 0;
-		meta->id = req->id;
+		meta->id = req.id;
 	}
 
-	req = RING_GET_REQUEST(&vif->rx, vif->rx.req_cons++);
+	RING_COPY_REQUEST(&vif->rx, vif->rx.req_cons++, &req);
 	meta = npo->meta + npo->meta_prod++;
 
 	if (!vif->gso_prefix)
@@ -544,9 +544,9 @@ static int netbk_gop_skb(struct sk_buff *skb,
 		meta->gso_size = 0;
 
 	meta->size = 0;
-	meta->id = req->id;
+	meta->id = req.id;
 	npo->copy_off = 0;
-	npo->copy_gref = req->gref;
+	npo->copy_gref = req.gref;
 
 	data = skb->data;
 	while (data < skb_tail_pointer(skb)) {
@@ -864,9 +864,7 @@ static void tx_add_credit(struct xenvif *vif)
 	 * Allow a burst big enough to transmit a jumbo packet of up to 128kB.
 	 * Otherwise the interface can seize up due to insufficient credit.
 	 */
-	max_burst = RING_GET_REQUEST(&vif->tx, vif->tx.req_cons)->size;
-	max_burst = min(max_burst, 131072UL);
-	max_burst = max(max_burst, vif->credit_bytes);
+	max_burst = max(131072UL, vif->credit_bytes);
 
 	/* Take care that adding a new chunk of credit doesn't wrap to zero. */
 	max_credit = vif->remaining_credit + vif->credit_bytes;
@@ -892,7 +890,7 @@ static void netbk_tx_err(struct xenvif *vif,
 		make_tx_response(vif, txp, XEN_NETIF_RSP_ERROR);
 		if (cons == end)
 			break;
-		txp = RING_GET_REQUEST(&vif->tx, cons++);
+		RING_COPY_REQUEST(&vif->tx, cons++, txp);
 	} while (1);
 	vif->tx.req_cons = cons;
 	xen_netbk_check_rx_xenvif(vif);
@@ -959,8 +957,7 @@ static int netbk_count_requests(struct xenvif *vif,
 		if (drop_err)
 			txp = &dropped_tx;
 
-		memcpy(txp, RING_GET_REQUEST(&vif->tx, cons + slots),
-		       sizeof(*txp));
+		RING_COPY_REQUEST(&vif->tx, cons + slots, txp);
 
 		/* If the guest submitted a frame >= 64 KiB then
 		 * first->size overflowed and following slots will
@@ -1248,8 +1245,7 @@ static int xen_netbk_get_extras(struct xenvif *vif,
 			return -EBADR;
 		}
 
-		memcpy(&extra, RING_GET_REQUEST(&vif->tx, cons),
-		       sizeof(extra));
+		RING_COPY_REQUEST(&vif->tx, cons, &extra);
 		if (unlikely(!extra.type ||
 			     extra.type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
 			vif->tx.req_cons = ++cons;
@@ -1444,7 +1440,7 @@ static unsigned xen_netbk_tx_build_gops(struct xen_netbk *netbk)
 
 		idx = vif->tx.req_cons;
 		rmb(); /* Ensure that we see the request before we copy it. */
-		memcpy(&txreq, RING_GET_REQUEST(&vif->tx, idx), sizeof(txreq));
+		RING_COPY_REQUEST(&vif->tx, idx, &txreq);
 
 		/* Credit-based scheduling. */
 		if (txreq.size > vif->remaining_credit &&
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index eba183c..3643bbf 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -70,6 +70,7 @@ static int ses_probe(struct device *dev)
 static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 			 void *buf, int bufflen)
 {
+	int ret;
 	unsigned char cmd[] = {
 		RECEIVE_DIAGNOSTIC,
 		1,		/* Set PCV bit */
@@ -78,9 +79,26 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 		bufflen & 0xff,
 		0
 	};
+	unsigned char recv_page_code;
 
-	return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+	ret =  scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
 				NULL, SES_TIMEOUT, SES_RETRIES, NULL);
+	if (unlikely(!ret))
+		return ret;
+
+	recv_page_code = ((unsigned char *)buf)[0];
+
+	if (likely(recv_page_code == page_code))
+		return ret;
+
+	/* successful diagnostic but wrong page code.  This happens to some
+	 * USB devices, just print a message and pretend there was an error */
+
+	sdev_printk(KERN_ERR, sdev,
+		    "Wrong diagnostic page; asked for %d got %u\n",
+		    page_code, recv_page_code);
+
+	return -EINVAL;
 }
 
 static int ses_send_diag(struct scsi_device *sdev, int page_code,
@@ -436,7 +454,15 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
 			if (desc_ptr)
 				desc_ptr += len;
 
-			if (addl_desc_ptr)
+			if (addl_desc_ptr &&
+			    /* only find additional descriptions for specific devices */
+			    (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER ||
+			     /* these elements are optional */
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS))
 				addl_desc_ptr += addl_desc_ptr[1] + 2;
 
 		}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index b2ccdea..f978051 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -554,7 +554,7 @@ struct spi_master *spi_alloc_master(struct device *dev, unsigned size)
 
 	device_initialize(&master->dev);
 	master->dev.class = &spi_master_class;
-	master->dev.parent = get_device(dev);
+	master->dev.parent = dev;
 	spi_master_set_devdata(master, &master[1]);
 
 	return master;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 4f02f9c..a846618 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -442,10 +442,12 @@ static void flush_to_ldisc(struct work_struct *work)
 			char_buf = head->char_buf_ptr + head->read;
 			flag_buf = head->flag_buf_ptr + head->read;
 			head->read += count;
-			spin_unlock_irqrestore(&tty->buf.lock, flags);
-			disc->ops->receive_buf(tty, char_buf,
+			if (disc->ops->receive_buf) {
+				spin_unlock_irqrestore(&tty->buf.lock, flags);
+				disc->ops->receive_buf(tty, char_buf,
 							flag_buf, count);
-			spin_lock_irqsave(&tty->buf.lock, flags);
+				spin_lock_irqsave(&tty->buf.lock, flags);
+			}
 		}
 		clear_bit(TTY_FLUSHING, &tty->flags);
 	}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 7cfe286..dde0330 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -153,7 +153,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 #define HUB_DEBOUNCE_STEP	  25
 #define HUB_DEBOUNCE_STABLE	 100
 
-
+static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
 
 static inline char *portspeed(struct usb_hub *hub, int portstatus)
@@ -792,10 +792,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	unsigned delay;
 
 	/* Continue a partial initialization */
-	if (type == HUB_INIT2)
-		goto init2;
-	if (type == HUB_INIT3)
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		device_lock(hub->intfdev);
+
+		/* Was the hub disconnected while we were waiting? */
+		if (hub->disconnected) {
+			device_unlock(hub->intfdev);
+			kref_put(&hub->kref, hub_release);
+			return;
+		}
+		if (type == HUB_INIT2)
+			goto init2;
 		goto init3;
+	}
+	kref_get(&hub->kref);
 
 	/* The superspeed hub except for root hub has to use Hub Depth
 	 * value as an offset into the route string to locate the bits
@@ -984,6 +994,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func3);
 			schedule_delayed_work(&hub->init_work,
 					msecs_to_jiffies(delay));
+			device_unlock(hub->intfdev);
 			return;		/* Continues at init3: below */
 		} else {
 			msleep(delay);
@@ -1004,6 +1015,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	/* Allow autosuspend if it was suppressed */
 	if (type <= HUB_INIT3)
 		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+
+	if (type == HUB_INIT2 || type == HUB_INIT3)
+		device_unlock(hub->intfdev);
+
+	kref_put(&hub->kref, hub_release);
 }
 
 /* Implement the continuations for the delays above */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 4735931..fa3ddf9 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -582,7 +582,8 @@ static int ipaq_open(struct tty_struct *tty,
 	 * through. Since this has a reasonably high failure rate, we retry
 	 * several times.
 	 */
-	while (retries--) {
+	while (retries) {
+		retries--;
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
 				0x1, 0, NULL, 0, 100);
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index a16beeb..b7f6485 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -446,7 +446,10 @@ static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
 			port = FSL_DIU_PORT_DLVDS;
 	}
 
-	return diu_ops.valid_monitor_port(port);
+	if (diu_ops.valid_monitor_port)
+		port = diu_ops.valid_monitor_port(port);
+
+	return port;
 }
 
 /**
@@ -1759,6 +1762,14 @@ static int __init fsl_diu_init(void)
 #else
 	monitor_port = fsl_diu_name_to_port(monitor_string);
 #endif
+
+	/*
+	 * Must to verify set_pixel_clock. If not implement on platform,
+	 * then that means that there is no platform support for the DIU.
+	 */
+	if (!diu_ops.set_pixel_clock)
+		return -ENODEV;
+
 	pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n");
 
 #ifdef CONFIG_NOT_COHERENT_CACHE
diff --git a/drivers/xen/xen-pciback/pciback.h b/drivers/xen/xen-pciback/pciback.h
index e9b4011..9447fcb 100644
--- a/drivers/xen/xen-pciback/pciback.h
+++ b/drivers/xen/xen-pciback/pciback.h
@@ -37,6 +37,7 @@ struct xen_pcibk_device {
 	struct xen_pci_sharedinfo *sh_info;
 	unsigned long flags;
 	struct work_struct op_work;
+	struct xen_pci_op op;
 };
 
 struct xen_pcibk_dev_data {
diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index e947e78..31c8580 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -68,6 +68,13 @@ static void xen_pcibk_control_isr(struct pci_dev *dev, int reset)
 		enable ? "enable" : "disable");
 
 	if (enable) {
+		/*
+		 * The MSI or MSI-X should not have an IRQ handler. Otherwise
+		 * if the guest terminates we BUG_ON in free_msi_irqs.
+		 */
+		if (dev->msi_enabled || dev->msix_enabled)
+			goto out;
+
 		rc = request_irq(dev_data->irq,
 				xen_pcibk_guest_interrupt, IRQF_SHARED,
 				dev_data->irq_name, dev);
@@ -142,7 +149,12 @@ int xen_pcibk_enable_msi(struct xen_pcibk_device *pdev,
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: enable MSI\n", pci_name(dev));
 
-	status = pci_enable_msi(dev);
+	if (dev->msi_enabled)
+		status = -EALREADY;
+	else if (dev->msix_enabled)
+		status = -ENXIO;
+	else
+		status = pci_enable_msi(dev);
 
 	if (status) {
 		pr_warn_ratelimited(DRV_NAME ": %s: error enabling MSI for guest %u: err %d\n",
@@ -171,20 +183,23 @@ static
 int xen_pcibk_disable_msi(struct xen_pcibk_device *pdev,
 			  struct pci_dev *dev, struct xen_pci_op *op)
 {
-	struct xen_pcibk_dev_data *dev_data;
-
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: disable MSI\n",
 		       pci_name(dev));
-	pci_disable_msi(dev);
 
+	if (dev->msi_enabled) {
+		struct xen_pcibk_dev_data *dev_data;
+
+		pci_disable_msi(dev);
+
+		dev_data = pci_get_drvdata(dev);
+		if (dev_data)
+			dev_data->ack_intr = 1;
+	}
 	op->value = dev->irq ? xen_pirq_from_irq(dev->irq) : 0;
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: MSI: %d\n", pci_name(dev),
 			op->value);
-	dev_data = pci_get_drvdata(dev);
-	if (dev_data)
-		dev_data->ack_intr = 1;
 	return 0;
 }
 
@@ -195,13 +210,26 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 	struct xen_pcibk_dev_data *dev_data;
 	int i, result;
 	struct msix_entry *entries;
+	u16 cmd;
 
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: enable MSI-X\n",
 		       pci_name(dev));
+
 	if (op->value > SH_INFO_MAX_VEC)
 		return -EINVAL;
 
+	if (dev->msix_enabled)
+		return -EALREADY;
+
+	/*
+	 * PCI_COMMAND_MEMORY must be enabled, otherwise we may not be able
+	 * to access the BARs where the MSI-X entries reside.
+	 */
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	if (dev->msi_enabled || !(cmd & PCI_COMMAND_MEMORY))
+		return -ENXIO;
+
 	entries = kmalloc(op->value * sizeof(*entries), GFP_KERNEL);
 	if (entries == NULL)
 		return -ENOMEM;
@@ -243,23 +271,27 @@ static
 int xen_pcibk_disable_msix(struct xen_pcibk_device *pdev,
 			   struct pci_dev *dev, struct xen_pci_op *op)
 {
-	struct xen_pcibk_dev_data *dev_data;
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: disable MSI-X\n",
 			pci_name(dev));
-	pci_disable_msix(dev);
 
+	if (dev->msix_enabled) {
+		struct xen_pcibk_dev_data *dev_data;
+
+		pci_disable_msix(dev);
+
+		dev_data = pci_get_drvdata(dev);
+		if (dev_data)
+			dev_data->ack_intr = 1;
+	}
 	/*
 	 * SR-IOV devices (which don't have any legacy IRQ) have
 	 * an undefined IRQ value of zero.
 	 */
 	op->value = dev->irq ? xen_pirq_from_irq(dev->irq) : 0;
 	if (unlikely(verbose_request))
-		printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n", pci_name(dev),
-			op->value);
-	dev_data = pci_get_drvdata(dev);
-	if (dev_data)
-		dev_data->ack_intr = 1;
+		printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n",
+		       pci_name(dev), op->value);
 	return 0;
 }
 #endif
@@ -296,9 +328,11 @@ void xen_pcibk_do_op(struct work_struct *data)
 		container_of(data, struct xen_pcibk_device, op_work);
 	struct pci_dev *dev;
 	struct xen_pcibk_dev_data *dev_data = NULL;
-	struct xen_pci_op *op = &pdev->sh_info->op;
+	struct xen_pci_op *op = &pdev->op;
 	int test_intx = 0;
 
+	*op = pdev->sh_info->op;
+	barrier();
 	dev = xen_pcibk_get_pci_dev(pdev, op->domain, op->bus, op->devfn);
 
 	if (dev == NULL)
@@ -340,6 +374,17 @@ void xen_pcibk_do_op(struct work_struct *data)
 		if ((dev_data->enable_intx != test_intx))
 			xen_pcibk_control_isr(dev, 0 /* no reset */);
 	}
+	pdev->sh_info->op.err = op->err;
+	pdev->sh_info->op.value = op->value;
+#ifdef CONFIG_PCI_MSI
+	if (op->cmd == XEN_PCI_OP_enable_msix && op->err == 0) {
+		unsigned int i;
+
+		for (i = 0; i < op->value; i++)
+			pdev->sh_info->op.msix_entries[i].vector =
+				op->msix_entries[i].vector;
+	}
+#endif
 	/* Tell the driver domain that we're done. */
 	wmb();
 	clear_bit(_XEN_PCIF_active, (unsigned long *)&pdev->sh_info->flags);
diff --git a/fs/ocfs2/resize.c b/fs/ocfs2/resize.c
index ec55add..2ca64fa 100644
--- a/fs/ocfs2/resize.c
+++ b/fs/ocfs2/resize.c
@@ -56,11 +56,12 @@ static u16 ocfs2_calc_new_backup_super(struct inode *inode,
 				       int new_clusters,
 				       u32 first_new_cluster,
 				       u16 cl_cpg,
+				       u16 old_bg_clusters,
 				       int set)
 {
 	int i;
 	u16 backups = 0;
-	u32 cluster;
+	u32 cluster, lgd_cluster;
 	u64 blkno, gd_blkno, lgd_blkno = le64_to_cpu(gd->bg_blkno);
 
 	for (i = 0; i < OCFS2_MAX_BACKUP_SUPERBLOCKS; i++) {
@@ -73,6 +74,12 @@ static u16 ocfs2_calc_new_backup_super(struct inode *inode,
 		else if (gd_blkno > lgd_blkno)
 			break;
 
+		/* check if already done backup super */
+		lgd_cluster = ocfs2_blocks_to_clusters(inode->i_sb, lgd_blkno);
+		lgd_cluster += old_bg_clusters;
+		if (lgd_cluster >= cluster)
+			continue;
+
 		if (set)
 			ocfs2_set_bit(cluster % cl_cpg,
 				      (unsigned long *)gd->bg_bitmap);
@@ -101,6 +108,7 @@ static int ocfs2_update_last_group_and_inode(handle_t *handle,
 	u16 chain, num_bits, backups = 0;
 	u16 cl_bpc = le16_to_cpu(cl->cl_bpc);
 	u16 cl_cpg = le16_to_cpu(cl->cl_cpg);
+	u16 old_bg_clusters;
 
 	trace_ocfs2_update_last_group_and_inode(new_clusters,
 						first_new_cluster);
@@ -114,6 +122,7 @@ static int ocfs2_update_last_group_and_inode(handle_t *handle,
 
 	group = (struct ocfs2_group_desc *)group_bh->b_data;
 
+	old_bg_clusters = le16_to_cpu(group->bg_bits) / cl_bpc;
 	/* update the group first. */
 	num_bits = new_clusters * cl_bpc;
 	le16_add_cpu(&group->bg_bits, num_bits);
@@ -129,7 +138,7 @@ static int ocfs2_update_last_group_and_inode(handle_t *handle,
 						     group,
 						     new_clusters,
 						     first_new_cluster,
-						     cl_cpg, 1);
+						     cl_cpg, old_bg_clusters, 1);
 		le16_add_cpu(&group->bg_free_bits_count, -1 * backups);
 	}
 
@@ -169,7 +178,7 @@ out_rollback:
 					    group,
 					    new_clusters,
 					    first_new_cluster,
-					    cl_cpg, 0);
+					    cl_cpg, old_bg_clusters, 0);
 		le16_add_cpu(&group->bg_free_bits_count, backups);
 		le16_add_cpu(&group->bg_bits, -1 * num_bits);
 		le16_add_cpu(&group->bg_free_bits_count, -1 * num_bits);
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index 9a33c5f..f6c229e 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -29,7 +29,11 @@
 /* A few generic types ... taken from ses-2 */
 enum enclosure_component_type {
 	ENCLOSURE_COMPONENT_DEVICE = 0x01,
+	ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS = 0x07,
+	ENCLOSURE_COMPONENT_SCSI_TARGET_PORT = 0x14,
+	ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT = 0x15,
 	ENCLOSURE_COMPONENT_ARRAY_DEVICE = 0x17,
+	ENCLOSURE_COMPONENT_SAS_EXPANDER = 0x18,
 };
 
 /* ses-2 common element status */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index d0c9e6d..d9c4a60 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2134,8 +2134,7 @@ extern int	       skb_copy_datagram_iovec(const struct sk_buff *from,
 					       int size);
 extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
 							int hlen,
-							struct iovec *iov,
-							int len);
+							struct iovec *iov);
 extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
 						    int offset,
 						    const struct iovec *from,
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 2cccd82..9069f8d 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1586,7 +1586,8 @@ struct sctp_association {
 		 *             : order.  When DATA chunks are out of order,
 		 *             : SACK's are not delayed (see Section 6).
 		 */
-		__u8    sack_needed;     /* Do we need to sack the peer? */
+		__u8    sack_needed:1,     /* Do we need to sack the peer? */
+			zero_window_announced:1;
 		__u32	sack_cnt;
 
 		/* These are capabilities which our peer advertised.  */
diff --git a/include/net/sock.h b/include/net/sock.h
index ce6f641..38fcee9 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -302,8 +302,8 @@ struct sock {
 				sk_no_check  : 2,
 				sk_userlocks : 4,
 				sk_protocol  : 8,
-#define SK_PROTOCOL_MAX ((u8)~0U)
 				sk_type      : 16;
+#define SK_PROTOCOL_MAX ((u8)~0U)
 	kmemcheck_bitfield_end(flags);
 	int			sk_wmem_queued;
 	gfp_t			sk_allocation;
diff --git a/include/sound/tlv.h b/include/sound/tlv.h
index 7067e2d..49e7bd6 100644
--- a/include/sound/tlv.h
+++ b/include/sound/tlv.h
@@ -38,21 +38,26 @@
 #define SNDRV_CTL_TLVT_DB_MINMAX 4	/* dB scale with min/max */
 #define SNDRV_CTL_TLVT_DB_MINMAX_MUTE 5	/* dB scale with min/max with mute */
 
+#define TLV_ITEM(type, ...) \
+	(type), TLV_LENGTH(__VA_ARGS__), __VA_ARGS__
+#define TLV_LENGTH(...) \
+	((unsigned int)sizeof((const unsigned int[]) { __VA_ARGS__ }))
+
 #define TLV_DB_SCALE_MASK	0xffff
 #define TLV_DB_SCALE_MUTE	0x10000
 #define TLV_DB_SCALE_ITEM(min, step, mute)			\
-	SNDRV_CTL_TLVT_DB_SCALE, 2 * sizeof(unsigned int),	\
-	(min), ((step) & TLV_DB_SCALE_MASK) | ((mute) ? TLV_DB_SCALE_MUTE : 0)
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_SCALE,			\
+		 (min),					\
+		 ((step) & TLV_DB_SCALE_MASK) |		\
+			((mute) ? TLV_DB_SCALE_MUTE : 0))
 #define DECLARE_TLV_DB_SCALE(name, min, step, mute) \
 	unsigned int name[] = { TLV_DB_SCALE_ITEM(min, step, mute) }
 
 /* dB scale specified with min/max values instead of step */
 #define TLV_DB_MINMAX_ITEM(min_dB, max_dB)			\
-	SNDRV_CTL_TLVT_DB_MINMAX, 2 * sizeof(unsigned int),	\
-	(min_dB), (max_dB)
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_MINMAX, (min_dB), (max_dB))
 #define TLV_DB_MINMAX_MUTE_ITEM(min_dB, max_dB)			\
-	SNDRV_CTL_TLVT_DB_MINMAX_MUTE, 2 * sizeof(unsigned int),	\
-	(min_dB), (max_dB)
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_MINMAX_MUTE, (min_dB), (max_dB))
 #define DECLARE_TLV_DB_MINMAX(name, min_dB, max_dB) \
 	unsigned int name[] = { TLV_DB_MINMAX_ITEM(min_dB, max_dB) }
 #define DECLARE_TLV_DB_MINMAX_MUTE(name, min_dB, max_dB) \
@@ -60,13 +65,16 @@
 
 /* linear volume between min_dB and max_dB (.01dB unit) */
 #define TLV_DB_LINEAR_ITEM(min_dB, max_dB)		    \
-	SNDRV_CTL_TLVT_DB_LINEAR, 2 * sizeof(unsigned int), \
-	(min_dB), (max_dB)
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_LINEAR, (min_dB), (max_dB))
 #define DECLARE_TLV_DB_LINEAR(name, min_dB, max_dB)	\
 	unsigned int name[] = { TLV_DB_LINEAR_ITEM(min_dB, max_dB) }
 
 /* dB range container */
 /* Each item is: <min> <max> <TLV> */
+#define TLV_DB_RANGE_ITEM(...) \
+	TLV_ITEM(SNDRV_CTL_TLVT_DB_RANGE, __VA_ARGS__)
+#define DECLARE_TLV_DB_RANGE(name, ...) \
+	unsigned int name[] = { TLV_DB_RANGE_ITEM(__VA_ARGS__) }
 /* The below assumes that each item TLV is 4 words like DB_SCALE or LINEAR */
 #define TLV_DB_RANGE_HEAD(num)			\
 	SNDRV_CTL_TLVT_DB_RANGE, 6 * (num) * sizeof(unsigned int)
diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h
index 7d28aff..7dc685b4 100644
--- a/include/xen/interface/io/ring.h
+++ b/include/xen/interface/io/ring.h
@@ -181,6 +181,20 @@ struct __name##_back_ring {						\
 #define RING_GET_REQUEST(_r, _idx)					\
     (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
 
+/*
+ * Get a local copy of a request.
+ *
+ * Use this in preference to RING_GET_REQUEST() so all processing is
+ * done on a local copy that cannot be modified by the other end.
+ *
+ * Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this
+ * to be ineffective where _req is a struct which consists of only bitfields.
+ */
+#define RING_COPY_REQUEST(_r, _idx, _req) do {				\
+	/* Use volatile to force the copy into _req. */			\
+	*(_req) = *(volatile typeof(_req))RING_GET_REQUEST(_r, _idx);	\
+} while (0)
+
 #define RING_GET_RESPONSE(_r, _idx)					\
     (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 127a32e..8080f98 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1200,6 +1200,7 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 	if (!desc)
 		return NULL;
 
+	chip_bus_lock(desc);
 	raw_spin_lock_irqsave(&desc->lock, flags);
 
 	/*
@@ -1213,7 +1214,7 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 		if (!action) {
 			WARN(1, "Trying to free already-free IRQ %d\n", irq);
 			raw_spin_unlock_irqrestore(&desc->lock, flags);
-
+			chip_bus_sync_unlock(desc);
 			return NULL;
 		}
 
@@ -1242,6 +1243,7 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 #endif
 
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
+	chip_bus_sync_unlock(desc);
 
 	unregister_handler_proc(irq, action);
 
@@ -1316,9 +1318,7 @@ void free_irq(unsigned int irq, void *dev_id)
 		desc->affinity_notify = NULL;
 #endif
 
-	chip_bus_lock(desc);
 	kfree(__free_irq(irq, dev_id));
-	chip_bus_sync_unlock(desc);
 }
 EXPORT_SYMBOL(free_irq);
 
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 09d87b7..223232a 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -716,23 +716,30 @@ int is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
  */
 static int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long pfn;
+	unsigned long pfn, sec_end_pfn;
 	struct zone *zone = NULL;
 	struct page *page;
 	int i;
-	for (pfn = start_pfn;
+	for (pfn = start_pfn, sec_end_pfn = SECTION_ALIGN_UP(start_pfn);
 	     pfn < end_pfn;
-	     pfn += MAX_ORDER_NR_PAGES) {
-		i = 0;
-		/* This is just a CONFIG_HOLES_IN_ZONE check.*/
-		while ((i < MAX_ORDER_NR_PAGES) && !pfn_valid_within(pfn + i))
-			i++;
-		if (i == MAX_ORDER_NR_PAGES)
+	     pfn = sec_end_pfn + 1, sec_end_pfn += PAGES_PER_SECTION) {
+		/* Make sure the memory section is present first */
+		if (!present_section_nr(pfn_to_section_nr(pfn)))
 			continue;
-		page = pfn_to_page(pfn + i);
-		if (zone && page_zone(page) != zone)
-			return 0;
-		zone = page_zone(page);
+		for (; pfn < sec_end_pfn && pfn < end_pfn;
+		     pfn += MAX_ORDER_NR_PAGES) {
+			i = 0;
+			/* This is just a CONFIG_HOLES_IN_ZONE check.*/
+			while ((i < MAX_ORDER_NR_PAGES) &&
+				!pfn_valid_within(pfn + i))
+				i++;
+			if (i == MAX_ORDER_NR_PAGES)
+				continue;
+			page = pfn_to_page(pfn + i);
+			if (zone && page_zone(page) != zone)
+				return 0;
+			zone = page_zone(page);
+		}
 	}
 	return 1;
 }
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 14d8cb4..887e83f 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1203,9 +1203,10 @@ static int __init setup_vmstat(void)
 #ifdef CONFIG_SMP
 	int cpu;
 
+	vmstat_wq = alloc_workqueue("vmstat", WQ_FREEZABLE|WQ_MEM_RECLAIM, 0);
+
 	register_cpu_notifier(&vmstat_notifier);
 
-	vmstat_wq = alloc_workqueue("vmstat", WQ_FREEZABLE|WQ_MEM_RECLAIM, 0);
 	for_each_online_cpu(cpu)
 		start_cpu_timer(cpu);
 #endif
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 6616bfb..a496313 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -709,7 +709,6 @@ EXPORT_SYMBOL(__skb_checksum_complete);
  *	@skb: skbuff
  *	@hlen: hardware length
  *	@iov: io vector
- *	@len: amount of data to copy from skb to iov
  *
  *	Caller _must_ check that skb will fit to this iovec.
  *
@@ -719,14 +718,11 @@ EXPORT_SYMBOL(__skb_checksum_complete);
  *			   can be modified!
  */
 int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
-				     int hlen, struct iovec *iov, int len)
+				     int hlen, struct iovec *iov)
 {
 	__wsum csum;
 	int chunk = skb->len - hlen;
 
-	if (chunk > len)
-		chunk = len;
-
 	if (!chunk)
 		return 0;
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 9a95205..ec29958 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5446,7 +5446,10 @@ int __netdev_update_features(struct net_device *dev)
 		netdev_err(dev,
 			"set_features() failed (%d); wanted 0x%08x, left 0x%08x\n",
 			err, features, dev->features);
-		return 0;
+		/* return non-0 since some features might have changed and
+		 * it's better to fire a spurious notification than miss it
+		 */
+		return -1;
 	}
 
 	if (!err)
diff --git a/net/core/dst.c b/net/core/dst.c
index 946e214..59381de 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -269,10 +269,11 @@ void dst_release(struct dst_entry *dst)
 {
 	if (dst) {
 		int newrefcnt;
+		unsigned short nocache = dst->flags & DST_NOCACHE;
 
 		newrefcnt = atomic_dec_return(&dst->__refcnt);
 		WARN_ON(newrefcnt < 0);
-		if (!newrefcnt && unlikely(dst->flags & DST_NOCACHE)) {
+		if (!newrefcnt && unlikely(nocache)) {
 			dst = dst_destroy(dst);
 			if (dst)
 				__dst_free(dst);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 3877e16..039e40f 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5198,7 +5198,7 @@ static int tcp_copy_to_iovec(struct sock *sk, struct sk_buff *skb, int hlen)
 		err = skb_copy_datagram_iovec(skb, hlen, tp->ucopy.iov, chunk);
 	else
 		err = skb_copy_and_csum_datagram_iovec(skb, hlen,
-						       tp->ucopy.iov, chunk);
+						       tp->ucopy.iov);
 
 	if (!err) {
 		tp->ucopy.len -= chunk;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index b111221..f602611 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1172,6 +1172,7 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	int peeked;
 	int err;
 	int is_udplite = IS_UDPLITE(sk);
+	bool checksum_valid = false;
 	bool slow;
 
 	if (flags & MSG_ERRQUEUE)
@@ -1197,17 +1198,18 @@ try_again:
 	 */
 
 	if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) {
-		if (udp_lib_checksum_complete(skb))
+		checksum_valid = !udp_lib_checksum_complete(skb);
+		if (!checksum_valid)
 			goto csum_copy_err;
 	}
 
-	if (skb_csum_unnecessary(skb))
+	if (checksum_valid || skb_csum_unnecessary(skb))
 		err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
 					      msg->msg_iov, copied);
 	else {
 		err = skb_copy_and_csum_datagram_iovec(skb,
 						       sizeof(struct udphdr),
-						       msg->msg_iov, copied);
+						       msg->msg_iov);
 
 		if (err == -EINVAL)
 			goto csum_copy_err;
diff --git a/net/ipv6/addrlabel.c b/net/ipv6/addrlabel.c
index 2d8ddba..c8c6a12 100644
--- a/net/ipv6/addrlabel.c
+++ b/net/ipv6/addrlabel.c
@@ -558,7 +558,7 @@ static int ip6addrlbl_get(struct sk_buff *in_skb, struct nlmsghdr* nlh,
 
 	rcu_read_lock();
 	p = __ipv6_addr_label(net, addr, ipv6_addr_type(addr), ifal->ifal_index);
-	if (p && ip6addrlbl_hold(p))
+	if (p && !ip6addrlbl_hold(p))
 		p = NULL;
 	lseq = ip6addrlbl_table.seq;
 	rcu_read_unlock();
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index d1e528c..bebc821 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -479,7 +479,7 @@ static int rawv6_recvmsg(struct kiocb *iocb, struct sock *sk,
 			goto csum_copy_err;
 		err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
 	} else {
-		err = skb_copy_and_csum_datagram_iovec(skb, 0, msg->msg_iov, copied);
+		err = skb_copy_and_csum_datagram_iovec(skb, 0, msg->msg_iov);
 		if (err == -EINVAL)
 			goto csum_copy_err;
 	}
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 3308803..03a7ed1 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -344,6 +344,7 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk,
 	int peeked;
 	int err;
 	int is_udplite = IS_UDPLITE(sk);
+	bool checksum_valid = false;
 	int is_udp4;
 	bool slow;
 
@@ -375,16 +376,16 @@ try_again:
 	 */
 
 	if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) {
-		if (udp_lib_checksum_complete(skb))
+		checksum_valid = !udp_lib_checksum_complete(skb);
+		if (!checksum_valid)
 			goto csum_copy_err;
 	}
 
-	if (skb_csum_unnecessary(skb))
+	if (checksum_valid || skb_csum_unnecessary(skb))
 		err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
 					      msg->msg_iov, copied       );
 	else {
-		err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr),
-						       msg->msg_iov, copied);
+		err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov);
 		if (err == -EINVAL)
 			goto csum_copy_err;
 	}
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 5be1957..13d0fb6 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -50,7 +50,6 @@
 struct rfkill {
 	spinlock_t		lock;
 
-	const char		*name;
 	enum rfkill_type	type;
 
 	unsigned long		state;
@@ -74,6 +73,7 @@ struct rfkill {
 	struct delayed_work	poll_work;
 	struct work_struct	uevent_work;
 	struct work_struct	sync_work;
+	char			name[];
 };
 #define to_rfkill(d)	container_of(d, struct rfkill, dev)
 
@@ -848,14 +848,14 @@ struct rfkill * __must_check rfkill_alloc(const char *name,
 	if (WARN_ON(type == RFKILL_TYPE_ALL || type >= NUM_RFKILL_TYPES))
 		return NULL;
 
-	rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL);
+	rfkill = kzalloc(sizeof(*rfkill) + strlen(name) + 1, GFP_KERNEL);
 	if (!rfkill)
 		return NULL;
 
 	spin_lock_init(&rfkill->lock);
 	INIT_LIST_HEAD(&rfkill->node);
 	rfkill->type = type;
-	rfkill->name = name;
+	strcpy(rfkill->name, name);
 	rfkill->ops = ops;
 	rfkill->data = ops_data;
 
diff --git a/net/rxrpc/ar-recvmsg.c b/net/rxrpc/ar-recvmsg.c
index c67f5d3..5cc2da5 100644
--- a/net/rxrpc/ar-recvmsg.c
+++ b/net/rxrpc/ar-recvmsg.c
@@ -185,8 +185,7 @@ int rxrpc_recvmsg(struct kiocb *iocb, struct socket *sock,
 						      msg->msg_iov, copy);
 		} else {
 			ret = skb_copy_and_csum_datagram_iovec(skb, offset,
-							       msg->msg_iov,
-							       copy);
+							       msg->msg_iov);
 			if (ret == -EINVAL)
 				goto csum_copy_error;
 		}
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 1f9a6f7..054c6a2 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -314,14 +314,13 @@ static void sctp_v6_get_dst(struct sctp_transport *t, union sctp_addr *saddr,
 			}
 		}
 	}
-	rcu_read_unlock();
-
 	if (baddr) {
 		ipv6_addr_copy(&fl6->saddr, &baddr->v6.sin6_addr);
 		fl6->fl6_sport = baddr->v6.sin6_port;
 		final_p = fl6_update_dst(fl6, np->opt, &final);
 		dst = ip6_dst_lookup_flow(sk, fl6, final_p, false);
 	}
+	rcu_read_unlock();
 
 out:
 	if (!IS_ERR(dst)) {
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 3dd7207..7b28546 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -1265,6 +1265,7 @@ int sctp_outq_sack(struct sctp_outq *q, struct sctp_sackhdr *sack)
 	 */
 
 	sack_a_rwnd = ntohl(sack->a_rwnd);
+	asoc->peer.zero_window_announced = !sack_a_rwnd;
 	outstanding = q->outstanding_bytes;
 
 	if (outstanding < sack_a_rwnd)
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index d02dd3c..eb638dd 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -5302,7 +5302,8 @@ sctp_disposition_t sctp_sf_do_6_3_3_rtx(const struct sctp_endpoint *ep,
 	SCTP_INC_STATS(SCTP_MIB_T3_RTX_EXPIREDS);
 
 	if (asoc->overall_error_count >= asoc->max_retrans) {
-		if (asoc->state == SCTP_STATE_SHUTDOWN_PENDING) {
+		if (asoc->peer.zero_window_announced &&
+		    asoc->state == SCTP_STATE_SHUTDOWN_PENDING) {
 			/*
 			 * We are here likely because the receiver had its rwnd
 			 * closed for a while and we have not been able to
diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c
index ee52cb8..0d5ae4a 100644
--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -35,12 +35,17 @@
 
 static int fd_map;	/* File descriptor for file being modified. */
 static int mmap_failed; /* Boolean flag. */
-static void *ehdr_curr; /* current ElfXX_Ehdr *  for resource cleanup */
 static char gpfx;	/* prefix for global symbol name (sometimes '_') */
 static struct stat sb;	/* Remember .st_size, etc. */
 static jmp_buf jmpenv;	/* setjmp/longjmp per-file error escape */
 static const char *altmcount;	/* alternate mcount symbol name */
 static int warn_on_notrace_sect; /* warn when section has mcount not being recorded */
+static void *file_map;	/* pointer of the mapped file */
+static void *file_end;	/* pointer to the end of the mapped file */
+static int file_updated; /* flag to state file was changed */
+static void *file_ptr;	/* current file pointer location */
+static void *file_append; /* added to the end of the file */
+static size_t file_append_size; /* how much is added to end of file */
 
 /* setjmp() return values */
 enum {
@@ -54,10 +59,14 @@ static void
 cleanup(void)
 {
 	if (!mmap_failed)
-		munmap(ehdr_curr, sb.st_size);
+		munmap(file_map, sb.st_size);
 	else
-		free(ehdr_curr);
-	close(fd_map);
+		free(file_map);
+	file_map = NULL;
+	free(file_append);
+	file_append = NULL;
+	file_append_size = 0;
+	file_updated = 0;
 }
 
 static void __attribute__((noreturn))
@@ -79,12 +88,22 @@ succeed_file(void)
 static off_t
 ulseek(int const fd, off_t const offset, int const whence)
 {
-	off_t const w = lseek(fd, offset, whence);
-	if (w == (off_t)-1) {
-		perror("lseek");
+	switch (whence) {
+	case SEEK_SET:
+		file_ptr = file_map + offset;
+		break;
+	case SEEK_CUR:
+		file_ptr += offset;
+		break;
+	case SEEK_END:
+		file_ptr = file_map + (sb.st_size - offset);
+		break;
+	}
+	if (file_ptr < file_map) {
+		fprintf(stderr, "lseek: seek before file\n");
 		fail_file();
 	}
-	return w;
+	return file_ptr - file_map;
 }
 
 static size_t
@@ -101,12 +120,38 @@ uread(int const fd, void *const buf, size_t const count)
 static size_t
 uwrite(int const fd, void const *const buf, size_t const count)
 {
-	size_t const n = write(fd, buf, count);
-	if (n != count) {
-		perror("write");
-		fail_file();
+	size_t cnt = count;
+	off_t idx = 0;
+
+	file_updated = 1;
+
+	if (file_ptr + count >= file_end) {
+		off_t aoffset = (file_ptr + count) - file_end;
+
+		if (aoffset > file_append_size) {
+			file_append = realloc(file_append, aoffset);
+			file_append_size = aoffset;
+		}
+		if (!file_append) {
+			perror("write");
+			fail_file();
+		}
+		if (file_ptr < file_end) {
+			cnt = file_end - file_ptr;
+		} else {
+			cnt = 0;
+			idx = aoffset - count;
+		}
 	}
-	return n;
+
+	if (cnt)
+		memcpy(file_ptr, buf, cnt);
+
+	if (cnt < count)
+		memcpy(file_append + idx, buf + cnt, count - cnt);
+
+	file_ptr += count;
+	return count;
 }
 
 static void *
@@ -163,9 +208,7 @@ static int make_nop_x86(void *map, size_t const offset)
  */
 static void *mmap_file(char const *fname)
 {
-	void *addr;
-
-	fd_map = open(fname, O_RDWR);
+	fd_map = open(fname, O_RDONLY);
 	if (fd_map < 0 || fstat(fd_map, &sb) < 0) {
 		perror(fname);
 		fail_file();
@@ -174,15 +217,58 @@ static void *mmap_file(char const *fname)
 		fprintf(stderr, "not a regular file: %s\n", fname);
 		fail_file();
 	}
-	addr = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE,
-		    fd_map, 0);
+	file_map = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE,
+			fd_map, 0);
 	mmap_failed = 0;
-	if (addr == MAP_FAILED) {
+	if (file_map == MAP_FAILED) {
 		mmap_failed = 1;
-		addr = umalloc(sb.st_size);
-		uread(fd_map, addr, sb.st_size);
+		file_map = umalloc(sb.st_size);
+		uread(fd_map, file_map, sb.st_size);
+	}
+	close(fd_map);
+
+	file_end = file_map + sb.st_size;
+
+	return file_map;
+}
+
+static void write_file(const char *fname)
+{
+	char tmp_file[strlen(fname) + 4];
+	size_t n;
+
+	if (!file_updated)
+		return;
+
+	sprintf(tmp_file, "%s.rc", fname);
+
+	/*
+	 * After reading the entire file into memory, delete it
+	 * and write it back, to prevent weird side effects of modifying
+	 * an object file in place.
+	 */
+	fd_map = open(tmp_file, O_WRONLY | O_TRUNC | O_CREAT, sb.st_mode);
+	if (fd_map < 0) {
+		perror(fname);
+		fail_file();
+	}
+	n = write(fd_map, file_map, sb.st_size);
+	if (n != sb.st_size) {
+		perror("write");
+		fail_file();
+	}
+	if (file_append_size) {
+		n = write(fd_map, file_append, file_append_size);
+		if (n != file_append_size) {
+			perror("write");
+			fail_file();
+		}
+	}
+	close(fd_map);
+	if (rename(tmp_file, fname) < 0) {
+		perror(fname);
+		fail_file();
 	}
-	return addr;
 }
 
 /* w8rev, w8nat, ...: Handle endianness. */
@@ -289,7 +375,6 @@ do_file(char const *const fname)
 	Elf32_Ehdr *const ehdr = mmap_file(fname);
 	unsigned int reltype = 0;
 
-	ehdr_curr = ehdr;
 	w = w4nat;
 	w2 = w2nat;
 	w8 = w8nat;
@@ -401,6 +486,7 @@ do_file(char const *const fname)
 	}
 	}  /* end switch */
 
+	write_file(fname);
 	cleanup();
 }
 
@@ -453,11 +539,14 @@ main(int argc, char *argv[])
 		case SJ_SETJMP:    /* normal sequence */
 			/* Avoid problems if early cleanup() */
 			fd_map = -1;
-			ehdr_curr = NULL;
 			mmap_failed = 1;
+			file_map = NULL;
+			file_ptr = NULL;
+			file_updated = 0;
 			do_file(file);
 			break;
 		case SJ_FAIL:    /* error in do_file or below */
+			fprintf(stderr, "%s: failed\n", file);
 			++n_error;
 			break;
 		case SJ_SUCCEED:    /* premature success */
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index b70eaa2..234ce30 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -688,16 +688,16 @@ long keyctl_read_key(key_serial_t keyid, char __user *buffer, size_t buflen)
 
 	/* the key is probably readable - now try to read it */
 can_read_key:
-	ret = key_validate(key);
-	if (ret == 0) {
-		ret = -EOPNOTSUPP;
-		if (key->type->read) {
-			/* read the data with the semaphore held (since we
-			 * might sleep) */
-			down_read(&key->sem);
+	ret = -EOPNOTSUPP;
+	if (key->type->read) {
+		/* Read the data with the semaphore held (since we might sleep)
+		 * to protect against the key being updated or revoked.
+		 */
+		down_read(&key->sem);
+		ret = key_validate(key);
+		if (ret == 0)
 			ret = key->type->read(key, buffer, buflen);
-			up_read(&key->sem);
-		}
+		up_read(&key->sem);
 	}
 
 error2:
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 488e531..2dc90a4 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1213,6 +1213,8 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 		break;
 	}
 
+	snd_usb_mixer_fu_apply_quirk(state->mixer, cval, unitid, kctl);
+
 	range = (cval->max - cval->min) / cval->res;
 	/* Are there devices with volume range more than 255? I use a bit more
 	 * to be sure. 384 is a resolution magic number found on Logitech
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index 893b750..cb98040 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -319,13 +319,6 @@ static struct usbmix_name_map bose_companion5_map[] = {
 	{ 0 }	/* terminator */
 };
 
-/* Dragonfly DAC 1.2, the dB conversion factor is 1 instead of 256 */
-static struct usbmix_dB_map dragonfly_1_2_dB = {0, 5000};
-static struct usbmix_name_map dragonfly_1_2_map[] = {
-	{ 7, NULL, .dB = &dragonfly_1_2_dB },
-	{ 0 }	/* terminator */
-};
-
 /*
  * Control map entries
  */
@@ -413,11 +406,6 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
 		.id = USB_ID(0x05a7, 0x1020),
 		.map = bose_companion5_map,
 	},
-	{
-		/* Dragonfly DAC 1.2 */
-		.id = USB_ID(0x21b4, 0x0081),
-		.map = dragonfly_1_2_map,
-	},
 	{ 0 } /* terminator */
 };
 
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 040d101..21f4d44 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -34,6 +34,7 @@
 #include <sound/control.h>
 #include <sound/hwdep.h>
 #include <sound/info.h>
+#include <sound/tlv.h>
 
 #include "usbaudio.h"
 #include "mixer.h"
@@ -682,3 +683,39 @@ void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
 	}
 }
 
+static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
+					 struct snd_kcontrol *kctl)
+{
+	/* Approximation using 10 ranges based on output measurement on hw v1.2.
+	 * This seems close to the cubic mapping e.g. alsamixer uses. */
+	static const DECLARE_TLV_DB_RANGE(scale,
+		 0,  1, TLV_DB_MINMAX_ITEM(-5300, -4970),
+		 2,  5, TLV_DB_MINMAX_ITEM(-4710, -4160),
+		 6,  7, TLV_DB_MINMAX_ITEM(-3884, -3710),
+		 8, 14, TLV_DB_MINMAX_ITEM(-3443, -2560),
+		15, 16, TLV_DB_MINMAX_ITEM(-2475, -2324),
+		17, 19, TLV_DB_MINMAX_ITEM(-2228, -2031),
+		20, 26, TLV_DB_MINMAX_ITEM(-1910, -1393),
+		27, 31, TLV_DB_MINMAX_ITEM(-1322, -1032),
+		32, 40, TLV_DB_MINMAX_ITEM(-968, -490),
+		41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
+	);
+
+	dev_info(&mixer->chip->dev->dev, "applying DragonFly dB scale quirk\n");
+	kctl->tlv.p = scale;
+	kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+	kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+}
+
+void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
+				  struct usb_mixer_elem_info *cval, int unitid,
+				  struct snd_kcontrol *kctl)
+{
+	switch (mixer->chip->usb_id) {
+	case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
+		if (unitid == 7 && cval->min == 0 && cval->max == 50)
+			snd_dragonfly_quirk_db_scale(mixer, kctl);
+		break;
+	}
+}
+
diff --git a/sound/usb/mixer_quirks.h b/sound/usb/mixer_quirks.h
index bdbfab0..177c329 100644
--- a/sound/usb/mixer_quirks.h
+++ b/sound/usb/mixer_quirks.h
@@ -9,5 +9,9 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
 void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
 				    int unitid);
 
+void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
+				  struct usb_mixer_elem_info *cval, int unitid,
+				  struct snd_kcontrol *kctl);
+
 #endif /* SND_USB_MIXER_QUIRKS_H */
 

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 811 bytes --]

Re: [PATCH 3.2 42/70] net: possible use after free in dst_release

[Francesco Ruggeri]

On Sun, Jan 17, 2016 at 7:18 PM, Ben Hutchings <ben@decadent.org.uk> wrote:
> 3.2.76-rc1 review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: Francesco Ruggeri <fruggeri@aristanetworks.com>
>
> commit 07a5d38453599052aff0877b16bb9c1585f08609 upstream.
>
> dst_release should not access dst->flags after decrementing
> __refcnt to 0. The dst_entry may be in dst_busy_list and
> dst_gc_task may dst_destroy it before dst_release gets a chance
> to access dst->flags.
>
> Fixes: d69bbf88c8d0 ("net: fix a race in dst_release()")
> Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst")
> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
> Acked-by: Eric Dumazet <edumazet@google.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> [bwh: Backported to 3.2: adjust context]
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  net/core/dst.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> --- a/net/core/dst.c
> +++ b/net/core/dst.c
> @@ -269,10 +269,11 @@ void dst_release(struct dst_entry *dst)
>  {
>         if (dst) {
>                 int newrefcnt;
> +               unsigned short nocache = dst->flags & DST_NOCACHE;

Only one minor thing. Before 3.6 dst->flags was an int.

Thanks,
Francesco

>
>                 newrefcnt = atomic_dec_return(&dst->__refcnt);
>                 WARN_ON(newrefcnt < 0);
> -               if (!newrefcnt && unlikely(dst->flags & DST_NOCACHE)) {
> +               if (!newrefcnt && unlikely(nocache)) {
>                         dst = dst_destroy(dst);
>                         if (dst)
>                                 __dst_free(dst);
>

Re: [PATCH 3.2 00/70] 3.2.76-rc1 review

[Guenter Roeck]

On 01/17/2016 07:18 PM, Ben Hutchings wrote:
> This is the start of the stable review cycle for the 3.2.76 release.
> There are 70 patches in this series, which will be posted as responses
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Jan 20 18:00:00 UTC 2016.
> Anything received after that time might be too late.
>

Build results:
	total: 93 pass: 93 fail: 0
Qemu test results:
	total: 58 pass: 58 fail: 0

Details are available at http://kerneltests.org/builders.

Thanks,
Guenter

Re: [PATCH 3.2 42/70] net: possible use after free in dst_release

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2251 bytes --]

On Sun, 2016-01-17 at 19:49 -0800, Francesco Ruggeri wrote:
> On Sun, Jan 17, 2016 at 7:18 PM, Ben Hutchings <ben@decadent.org.uk> wrote:
> > 3.2.76-rc1 review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Francesco Ruggeri <fruggeri@aristanetworks.com>
> > 
> > commit 07a5d38453599052aff0877b16bb9c1585f08609 upstream.
> > 
> > dst_release should not access dst->flags after decrementing
> > __refcnt to 0. The dst_entry may be in dst_busy_list and
> > dst_gc_task may dst_destroy it before dst_release gets a chance
> > to access dst->flags.
> > 
> > Fixes: d69bbf88c8d0 ("net: fix a race in dst_release()")
> > Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst")
> > Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
> > Acked-by: Eric Dumazet <edumazet@google.com>
> > Signed-off-by: David S. Miller <davem@davemloft.net>
> > [bwh: Backported to 3.2: adjust context]
> > Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> > ---
> >  net/core/dst.c | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > --- a/net/core/dst.c
> > +++ b/net/core/dst.c
> > @@ -269,10 +269,11 @@ void dst_release(struct dst_entry *dst)
> >  {
> >         if (dst) {
> >                 int newrefcnt;
> > +               unsigned short nocache = dst->flags & DST_NOCACHE;
> 
> Only one minor thing. Before 3.6 dst->flags was an int.

I noticed that - but no flags outside the 16-bit range are assigned, so
I think this is OK.

Ben.

> Thanks,
> Francesco
> 
> > 
> >                 newrefcnt = atomic_dec_return(&dst->__refcnt);
> >                 WARN_ON(newrefcnt < 0);
> > -               if (!newrefcnt && unlikely(dst->flags & DST_NOCACHE)) {
> > +               if (!newrefcnt && unlikely(nocache)) {
> >                         dst = dst_destroy(dst);
> >                         if (dst)
> >                                 __dst_free(dst);
> > 
-- 
Ben Hutchings
A free society is one where it is safe to be unpopular. - Adlai Stevenson

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 811 bytes --]

Re: [PATCH 3.2 00/70] 3.2.76-rc1 review

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 783 bytes --]

On Mon, 2016-01-18 at 01:12 -0800, Guenter Roeck wrote:
> On 01/17/2016 07:18 PM, Ben Hutchings wrote:
> > This is the start of the stable review cycle for the 3.2.76 release.
> > There are 70 patches in this series, which will be posted as responses
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed Jan 20 18:00:00 UTC 2016.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 93 pass: 93 fail: 0
> Qemu test results:
> 	total: 58 pass: 58 fail: 0
> 
> Details are available at http://kerneltests.org/builders.

Thanks for checking.

Ben.

-- 
Ben Hutchings
A free society is one where it is safe to be unpopular. - Adlai Stevenson

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 811 bytes --]

Re: [PATCH 3.2 47/70] vmstat: allocate vmstat_wq before it is used

[Luis Henriques]

On Mon, Jan 18, 2016 at 03:18:35AM +0000, Ben Hutchings wrote:
> 3.2.76-rc1 review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Michal Hocko <mhocko@suse.com>
> 
> commit 751e5f5c753e8d447bcf89f9e96b9616ac081628 upstream.
> 
> kernel test robot has reported the following crash:
> 
>   BUG: unable to handle kernel NULL pointer dereference at 00000100
>   IP: [<c1074df6>] __queue_work+0x26/0x390
>   *pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53
>   Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP
>   CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe #1
>   Workqueue: events vmstat_shepherd
>   task: cb684600 ti: cb7ba000 task.ti: cb7ba000
>   EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0
>   EIP is at __queue_work+0x26/0x390
>   EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000
>   ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38
>    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
>   CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0
>   Stack:
>   Call Trace:
>     __queue_delayed_work+0xa1/0x160
>     queue_delayed_work_on+0x36/0x60
>     vmstat_shepherd+0xad/0xf0
>     process_one_work+0x1aa/0x4c0
>     worker_thread+0x41/0x440
>     kthread+0xb0/0xd0
>     ret_from_kernel_thread+0x21/0x40
> 
> The reason is that start_shepherd_timer schedules the shepherd work item
> which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates
> that workqueue so if the further initialization takes more than HZ we
> might end up scheduling on a NULL vmstat_wq.  This is really unlikely
> but not impossible.
> 
> Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
> Reported-by: kernel test robot <ying.huang@linux.intel.com>
> Signed-off-by: Michal Hocko <mhocko@suse.com>
> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
> [bwh: Backported to 3.2: This precise race condition doesn't exist, but there
>  is a similar potential race with CPU hotplug.  So move the alloc_workqueue()
>  above register_cpu_notifier().]

FWIW, this looks correct to me and I'm queuing a similar fix for the
3.16 kernel as the race is similar.

Cheers,
--
Luís

> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  mm/vmstat.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> --- a/mm/vmstat.c
> +++ b/mm/vmstat.c
> @@ -1203,9 +1203,10 @@ static int __init setup_vmstat(void)
>  #ifdef CONFIG_SMP
>  	int cpu;
>  
> +	vmstat_wq = alloc_workqueue("vmstat", WQ_FREEZABLE|WQ_MEM_RECLAIM, 0);
> +
>  	register_cpu_notifier(&vmstat_notifier);
>  
> -	vmstat_wq = alloc_workqueue("vmstat", WQ_FREEZABLE|WQ_MEM_RECLAIM, 0);
>  	for_each_online_cpu(cpu)
>  		start_cpu_timer(cpu);
>  #endif
> 
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html