* ide-scsi, 1394-sbp2 and usb-storage scsi host ids
@ 2002-09-29 21:22 James H. Cloos Jr.
0 siblings, 0 replies; only message in thread
From: James H. Cloos Jr. @ 2002-09-29 21:22 UTC (permalink / raw)
To: linux-kernel
In all 2.4 versions I've tested, (the most recent of which are
2.4.20-pre4-ac1 and 2.4.20-pre8), ide-scsi, sbp2 and usb-storage all
use scsi host id 0. Eg (w/ just ide-scsi and sbp2):
:; cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Maxtor Model: 1394 storage Rev: v1.2
Type: Direct-Access ANSI SCSI revision: 06
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: CD-RW CRX810E Rev: 1.4c
Type: CD-ROM ANSI SCSI revision: 02
This causes problems at lest for sg:
:; cdrecord --scanbus
Cdrecord 1.11a05 (i686-suse-linux) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) 'Maxtor ' '1394 storage ' 'v1.2' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
I can't test 2.5 on this box, as /home, /opt, /tmp, /usr, /var and
swap are all in LVM1.
What does it take to get the host/channel/id/lun tuples to increment
the host value each time a releted module is inserted?
-JimC
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-09-29 21:17 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-09-29 21:22 ide-scsi, 1394-sbp2 and usb-storage scsi host ids James H. Cloos Jr.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).