linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFC][PATCH 0/4 v2] sycalls: Remove args i and n from syscall_get_arguments()
@ 2019-03-28 23:05 Steven Rostedt
  2019-03-28 23:05 ` [RFC][PATCH 1/4 v2] ptrace: Remove maxargs from task_current_syscall() Steven Rostedt
                   ` (4 more replies)
  0 siblings, 5 replies; 10+ messages in thread
From: Steven Rostedt @ 2019-03-28 23:05 UTC (permalink / raw)
  To: linux-kernel
  Cc: Linus Torvalds, Ingo Molnar, Andrew Morton, Andy Lutomirski,
	Roland McGrath, Oleg Nesterov, linux-arch, Peter Zijlstra,
	Thomas Gleixner, Gustavo A. R. Silva, Borislav Petkov,
	H. Peter Anvin, x86, Dominik Brodowski, Andy Lutomirski,
	Kees Cook, Eric W. Biederman


Two and a half years ago I sent out 3 patches and a title letter that
had this[1]:

  At Linux Plumbers, Andy Lutomirski approached me to tell me that the
  syscall_get_arguments() implementation in x86 was horrible and gcc
  certainly gets it wrong. He said that since the tracepoints only pass
  in 0 and 6 for i and n repectively, it should be optimized for that case.
  Inspecting the kernel, I discovered that all users pass in 0 for i and
  only one file passing in something other than 6 for the number of arguments.
  That code happens to be my own code used for the special syscall tracing.
  That can easily be converted to just using 0 and 6 as well, and only copying
  what is needed. Which is probably the faster path anyway for that case.

  I haven't run the numbers (I can do that when I get some time), but since
  pretty much all use cases use 0 and 6 and that would allow these functions
  not to need strange logic to handle odd cases, I think this is still a win.

It received positive comments but also Linus asked to remove the separate
arg pointers and replace them with a single structure and fill that
instead. But for some reason, this got pushed aside and forgotten (probably,
had to do with the fact that I left Red Hat shortly after this).

Recently, it was brought back up again[2] and I decided to dust off these
patches and resubmit them. I also added one more patch to do the same
for syscall_set_arguments() that I did for syscall_get_arguments() even
though syscall_set_arguments() currently (and never has) had any callers.
But we are told that in the near future it may have one.

The changes do optimize the logic a little, but for most archs I just kept
the same logic (loops and such) as I don't have a way to test it, and
didn't want to break the logic.

I added a new struct syscall_info that holds seccomp_data and also
includes a stack pointer (sp) field. I would change seccomp_data,
but because its in include/uapi/linux/seccomp.h I didn't want to
touch it and break userspace. Perhaps we could add the field at the
end, but I didn't want to chance it (unless others say its OK).

I ran these through zero-day-bot and compiled tested these changes for
all architectures except for csky which I do not have a cross compiler
for.

Note the following archs fail normal builds, but they fail the same
with these patches:

   arc
   h8300
   parisc64

Note, you may notice that I have "(Red Hat)" as the author of the
first three patches (even though they are signed off by "(VMware)").
This is because those patches were originally written while I was
working for Red Hat. But as I forward ported them while working for
VMware, my signed-off-by reflects that.

[1] - https://lore.kernel.org/lkml/20161107212634.529267342@goodmis.org/T/#u
[2] - https://lore.kernel.org/lkml/20190326151244.GC16837@redhat.com/T/#u

Steven Rostedt (Red Hat) (3):
      ptrace: Remove maxargs from task_current_syscall()
      tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments()
      syscalls: Remove start and number from syscall_get_arguments() args

Steven Rostedt (VMware) (1):
      syscalls: Remove start and number from syscall_set_arguments() args

----
 arch/arc/include/asm/syscall.h        |   7 +-
 arch/arm/include/asm/syscall.h        |  47 ++---------
 arch/arm64/include/asm/syscall.h      |  46 ++---------
 arch/c6x/include/asm/syscall.h        |  79 ++++---------------
 arch/csky/include/asm/syscall.h       |  26 ++-----
 arch/h8300/include/asm/syscall.h      |  34 ++------
 arch/hexagon/include/asm/syscall.h    |   4 +-
 arch/ia64/include/asm/syscall.h       |  13 +---
 arch/ia64/kernel/ptrace.c             |   7 +-
 arch/microblaze/include/asm/syscall.h |   8 +-
 arch/mips/include/asm/syscall.h       |   3 +-
 arch/mips/kernel/ptrace.c             |   2 +-
 arch/nds32/include/asm/syscall.h      |  62 +++------------
 arch/nios2/include/asm/syscall.h      |  84 ++++----------------
 arch/openrisc/include/asm/syscall.h   |  12 +--
 arch/parisc/include/asm/syscall.h     |  30 ++-----
 arch/powerpc/include/asm/syscall.h    |  15 ++--
 arch/riscv/include/asm/syscall.h      |  24 ++----
 arch/s390/include/asm/syscall.h       |  28 +++----
 arch/sh/include/asm/syscall_32.h      |  47 +++--------
 arch/sh/include/asm/syscall_64.h      |   8 +-
 arch/sparc/include/asm/syscall.h      |  11 ++-
 arch/um/include/asm/syscall-generic.h |  78 +++----------------
 arch/x86/include/asm/syscall.h        | 142 ++++++++--------------------------
 arch/xtensa/include/asm/syscall.h     |  33 ++------
 fs/proc/base.c                        |  17 ++--
 include/asm-generic/syscall.h         |  21 ++---
 include/linux/ptrace.h                |  11 ++-
 include/trace/events/syscalls.h       |   2 +-
 kernel/seccomp.c                      |   2 +-
 kernel/trace/trace_syscalls.c         |   9 ++-
 lib/syscall.c                         |  57 ++++++--------
 32 files changed, 247 insertions(+), 722 deletions(-)

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2019-03-30  4:05 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-28 23:05 [RFC][PATCH 0/4 v2] sycalls: Remove args i and n from syscall_get_arguments() Steven Rostedt
2019-03-28 23:05 ` [RFC][PATCH 1/4 v2] ptrace: Remove maxargs from task_current_syscall() Steven Rostedt
2019-03-28 23:05 ` [RFC][PATCH 2/4 v2] tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments() Steven Rostedt
2019-03-28 23:05 ` [RFC][PATCH 3/4 v2] syscalls: Remove start and number from syscall_get_arguments() args Steven Rostedt
2019-03-28 23:05 ` [RFC][PATCH 4/4 v2] syscalls: Remove start and number from syscall_set_arguments() args Steven Rostedt
2019-03-29 17:24 ` [RFC][PATCH 0/4 v2] sycalls: Remove args i and n from syscall_get_arguments() Linus Torvalds
2019-03-29 17:40   ` Steven Rostedt
2019-03-29 18:12     ` Linus Torvalds
2019-03-29 19:20       ` Dmitry V. Levin
2019-03-30  4:05     ` Palmer Dabbelt

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).