[patch V2 0/6] x86/irq: Cure various interrupt issues

[patch V2 0/6] x86/irq: Cure various interrupt issues

[Thomas Gleixner]

This series addresses a few long standing issues:

  1) The spurious interrupt warning which is emitted occasionally for
     no obvious reason. Partially harmless but annoying

  2) The spurious system vector detection which got wreckaged quite some
     time ago and can completely wedge a machine. Posted yesterday already
     in a preliminary version. Now actually verified that it does what it
     claims to do.

Details in the various patches.

For your conveniance the series is available from git:

    git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git WIP.irq

Changes vs. V1: Use the existing irq_get_irqchip_state() callback
	    	Fixup misleading comments
		Use the sync scheme in synchronize_irq() as well.

Thanks,

        tglx

8<--------------
 arch/x86/entry/entry_32.S      |   24 ++++++++++
 arch/x86/entry/entry_64.S      |   30 +++++++++++--
 arch/x86/include/asm/hw_irq.h  |    5 +-
 arch/x86/kernel/apic/apic.c    |   33 ++++++++++-----
 arch/x86/kernel/apic/io_apic.c |   46 ++++++++++++++++++++
 arch/x86/kernel/apic/vector.c  |    4 -
 arch/x86/kernel/idt.c          |    3 -
 arch/x86/kernel/irq.c          |    2 
 kernel/irq/autoprobe.c         |    6 +-
 kernel/irq/chip.c              |    6 ++
 kernel/irq/cpuhotplug.c        |    2 
 kernel/irq/internals.h         |    5 ++
 kernel/irq/manage.c            |   90 +++++++++++++++++++++++++++++++----------
 13 files changed, 211 insertions(+), 45 deletions(-)




    

[patch V2 1/6] genirq: Delay deactivation in free_irq()

[Thomas Gleixner]

When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:

There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.

Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.

This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.

Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
---

V2: Fix comment and add Reviewed tag

---
 kernel/irq/autoprobe.c  |    6 +++---
 kernel/irq/chip.c       |    6 ++++++
 kernel/irq/cpuhotplug.c |    2 +-
 kernel/irq/internals.h  |    1 +
 kernel/irq/manage.c     |   12 +++++++++++-
 5 files changed, 22 insertions(+), 5 deletions(-)

--- a/kernel/irq/autoprobe.c
+++ b/kernel/irq/autoprobe.c
@@ -90,7 +90,7 @@ unsigned long probe_irq_on(void)
 			/* It triggered already - consider it spurious. */
 			if (!(desc->istate & IRQS_WAITING)) {
 				desc->istate &= ~IRQS_AUTODETECT;
-				irq_shutdown(desc);
+				irq_shutdown_and_deactivate(desc);
 			} else
 				if (i < 32)
 					mask |= 1 << i;
@@ -127,7 +127,7 @@ unsigned int probe_irq_mask(unsigned lon
 				mask |= 1 << i;
 
 			desc->istate &= ~IRQS_AUTODETECT;
-			irq_shutdown(desc);
+			irq_shutdown_and_deactivate(desc);
 		}
 		raw_spin_unlock_irq(&desc->lock);
 	}
@@ -169,7 +169,7 @@ int probe_irq_off(unsigned long val)
 				nr_of_irqs++;
 			}
 			desc->istate &= ~IRQS_AUTODETECT;
-			irq_shutdown(desc);
+			irq_shutdown_and_deactivate(desc);
 		}
 		raw_spin_unlock_irq(&desc->lock);
 	}
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -314,6 +314,12 @@ void irq_shutdown(struct irq_desc *desc)
 		}
 		irq_state_clr_started(desc);
 	}
+}
+
+
+void irq_shutdown_and_deactivate(struct irq_desc *desc)
+{
+	irq_shutdown(desc);
 	/*
 	 * This must be called even if the interrupt was never started up,
 	 * because the activation can happen before the interrupt is
--- a/kernel/irq/cpuhotplug.c
+++ b/kernel/irq/cpuhotplug.c
@@ -116,7 +116,7 @@ static bool migrate_one_irq(struct irq_d
 		 */
 		if (irqd_affinity_is_managed(d)) {
 			irqd_set_managed_shutdown(d);
-			irq_shutdown(desc);
+			irq_shutdown_and_deactivate(desc);
 			return false;
 		}
 		affinity = cpu_online_mask;
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -82,6 +82,7 @@ extern int irq_activate_and_startup(stru
 extern int irq_startup(struct irq_desc *desc, bool resend, bool force);
 
 extern void irq_shutdown(struct irq_desc *desc);
+extern void irq_shutdown_and_deactivate(struct irq_desc *desc);
 extern void irq_enable(struct irq_desc *desc);
 extern void irq_disable(struct irq_desc *desc);
 extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/random.h>
 #include <linux/interrupt.h>
+#include <linux/irqdomain.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/sched/rt.h>
@@ -1699,6 +1700,7 @@ static struct irqaction *__free_irq(stru
 	/* If this was the last handler, shut down the IRQ line: */
 	if (!desc->action) {
 		irq_settings_clr_disable_unlazy(desc);
+		/* Only shutdown. Deactivate after synchronize_hardirq() */
 		irq_shutdown(desc);
 	}
 
@@ -1768,6 +1770,14 @@ static struct irqaction *__free_irq(stru
 		 * require it to deallocate resources over the slow bus.
 		 */
 		chip_bus_lock(desc);
+		/*
+		 * There is no interrupt on the fly anymore. Deactivate it
+		 * completely.
+		 */
+		raw_spin_lock_irqsave(&desc->lock, flags);
+		irq_domain_deactivate_irq(&desc->irq_data);
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+
 		irq_release_resources(desc);
 		chip_bus_sync_unlock(desc);
 		irq_remove_timings(desc);
@@ -1855,7 +1865,7 @@ static const void *__cleanup_nmi(unsigne
 	}
 
 	irq_settings_clr_disable_unlazy(desc);
-	irq_shutdown(desc);
+	irq_shutdown_and_deactivate(desc);
 
 	irq_release_resources(desc);
 

[tip:x86/apic] genirq: Delay deactivation in free_irq()

[tip-bot for Thomas Gleixner]

Commit-ID:  4001d8e8762f57d418b66e4e668601791900a1dd
Gitweb:     https://git.kernel.org/tip/4001d8e8762f57d418b66e4e668601791900a1dd
Author:     Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Fri, 28 Jun 2019 13:11:49 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 3 Jul 2019 10:12:28 +0200

genirq: Delay deactivation in free_irq()

When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:

There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.

Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.

This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.

Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de

---
 kernel/irq/autoprobe.c  |  6 +++---
 kernel/irq/chip.c       |  6 ++++++
 kernel/irq/cpuhotplug.c |  2 +-
 kernel/irq/internals.h  |  1 +
 kernel/irq/manage.c     | 12 +++++++++++-
 5 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/kernel/irq/autoprobe.c b/kernel/irq/autoprobe.c
index 16cbf6beb276..ae60cae24e9a 100644
--- a/kernel/irq/autoprobe.c
+++ b/kernel/irq/autoprobe.c
@@ -90,7 +90,7 @@ unsigned long probe_irq_on(void)
 			/* It triggered already - consider it spurious. */
 			if (!(desc->istate & IRQS_WAITING)) {
 				desc->istate &= ~IRQS_AUTODETECT;
-				irq_shutdown(desc);
+				irq_shutdown_and_deactivate(desc);
 			} else
 				if (i < 32)
 					mask |= 1 << i;
@@ -127,7 +127,7 @@ unsigned int probe_irq_mask(unsigned long val)
 				mask |= 1 << i;
 
 			desc->istate &= ~IRQS_AUTODETECT;
-			irq_shutdown(desc);
+			irq_shutdown_and_deactivate(desc);
 		}
 		raw_spin_unlock_irq(&desc->lock);
 	}
@@ -169,7 +169,7 @@ int probe_irq_off(unsigned long val)
 				nr_of_irqs++;
 			}
 			desc->istate &= ~IRQS_AUTODETECT;
-			irq_shutdown(desc);
+			irq_shutdown_and_deactivate(desc);
 		}
 		raw_spin_unlock_irq(&desc->lock);
 	}
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 51128bea3846..04fe4f989bd8 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -314,6 +314,12 @@ void irq_shutdown(struct irq_desc *desc)
 		}
 		irq_state_clr_started(desc);
 	}
+}
+
+
+void irq_shutdown_and_deactivate(struct irq_desc *desc)
+{
+	irq_shutdown(desc);
 	/*
 	 * This must be called even if the interrupt was never started up,
 	 * because the activation can happen before the interrupt is
diff --git a/kernel/irq/cpuhotplug.c b/kernel/irq/cpuhotplug.c
index 5b1072e394b2..6c7ca2e983a5 100644
--- a/kernel/irq/cpuhotplug.c
+++ b/kernel/irq/cpuhotplug.c
@@ -116,7 +116,7 @@ static bool migrate_one_irq(struct irq_desc *desc)
 		 */
 		if (irqd_affinity_is_managed(d)) {
 			irqd_set_managed_shutdown(d);
-			irq_shutdown(desc);
+			irq_shutdown_and_deactivate(desc);
 			return false;
 		}
 		affinity = cpu_online_mask;
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 70c3053bc1f6..9c957f8b1198 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -82,6 +82,7 @@ extern int irq_activate_and_startup(struct irq_desc *desc, bool resend);
 extern int irq_startup(struct irq_desc *desc, bool resend, bool force);
 
 extern void irq_shutdown(struct irq_desc *desc);
+extern void irq_shutdown_and_deactivate(struct irq_desc *desc);
 extern void irq_enable(struct irq_desc *desc);
 extern void irq_disable(struct irq_desc *desc);
 extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 53a081392115..dc8b35f2d545 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/random.h>
 #include <linux/interrupt.h>
+#include <linux/irqdomain.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/sched/rt.h>
@@ -1699,6 +1700,7 @@ static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
 	/* If this was the last handler, shut down the IRQ line: */
 	if (!desc->action) {
 		irq_settings_clr_disable_unlazy(desc);
+		/* Only shutdown. Deactivate after synchronize_hardirq() */
 		irq_shutdown(desc);
 	}
 
@@ -1768,6 +1770,14 @@ static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
 		 * require it to deallocate resources over the slow bus.
 		 */
 		chip_bus_lock(desc);
+		/*
+		 * There is no interrupt on the fly anymore. Deactivate it
+		 * completely.
+		 */
+		raw_spin_lock_irqsave(&desc->lock, flags);
+		irq_domain_deactivate_irq(&desc->irq_data);
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+
 		irq_release_resources(desc);
 		chip_bus_sync_unlock(desc);
 		irq_remove_timings(desc);
@@ -1855,7 +1865,7 @@ static const void *__cleanup_nmi(unsigned int irq, struct irq_desc *desc)
 	}
 
 	irq_settings_clr_disable_unlazy(desc);
-	irq_shutdown(desc);
+	irq_shutdown_and_deactivate(desc);
 
 	irq_release_resources(desc);
 

[patch V2 2/6] genirq: Fix misleading synchronize_irq() documentation

[Thomas Gleixner]

The function might sleep, so it cannot be called from interrupt
context. Not even with care.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/irq/manage.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -96,7 +96,8 @@ EXPORT_SYMBOL(synchronize_hardirq);
  *	to complete before returning. If you use this function while
  *	holding a resource the IRQ handler may need you will deadlock.
  *
- *	This function may be called - with care - from IRQ context.
+ *	Can only be called from preemptible code as it might sleep when
+ *	an interrupt thread is associated to @irq.
  */
 void synchronize_irq(unsigned int irq)
 {

Re: [patch V2 2/6] genirq: Fix misleading synchronize_irq() documentation

[Peter Zijlstra]

On Fri, Jun 28, 2019 at 01:11:50PM +0200, Thomas Gleixner wrote:
> The function might sleep, so it cannot be called from interrupt
> context. Not even with care.
> 
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> ---
>  kernel/irq/manage.c |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> --- a/kernel/irq/manage.c
> +++ b/kernel/irq/manage.c
> @@ -96,7 +96,8 @@ EXPORT_SYMBOL(synchronize_hardirq);
>   *	to complete before returning. If you use this function while
>   *	holding a resource the IRQ handler may need you will deadlock.
>   *
> - *	This function may be called - with care - from IRQ context.
> + *	Can only be called from preemptible code as it might sleep when
> + *	an interrupt thread is associated to @irq.
>   */
>  void synchronize_irq(unsigned int irq)
>  {

+	might_sleep();

?

Re: [patch V2 2/6] genirq: Fix misleading synchronize_irq() documentation

[Thomas Gleixner]

On Mon, 1 Jul 2019, Peter Zijlstra wrote:

> On Fri, Jun 28, 2019 at 01:11:50PM +0200, Thomas Gleixner wrote:
> > The function might sleep, so it cannot be called from interrupt
> > context. Not even with care.
> > 
> > Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> > ---
> >  kernel/irq/manage.c |    3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > --- a/kernel/irq/manage.c
> > +++ b/kernel/irq/manage.c
> > @@ -96,7 +96,8 @@ EXPORT_SYMBOL(synchronize_hardirq);
> >   *	to complete before returning. If you use this function while
> >   *	holding a resource the IRQ handler may need you will deadlock.
> >   *
> > - *	This function may be called - with care - from IRQ context.
> > + *	Can only be called from preemptible code as it might sleep when
> > + *	an interrupt thread is associated to @irq.
> >   */
> >  void synchronize_irq(unsigned int irq)
> >  {
> 
> +	might_sleep();
> 
> ?

  ....

	wait_event()
	  might_sleep() ...

?

Re: [patch V2 2/6] genirq: Fix misleading synchronize_irq() documentation

[Peter Zijlstra]

On Mon, Jul 01, 2019 at 08:01:24PM +0200, Thomas Gleixner wrote:
> On Mon, 1 Jul 2019, Peter Zijlstra wrote:
> 
> > On Fri, Jun 28, 2019 at 01:11:50PM +0200, Thomas Gleixner wrote:
> > > The function might sleep, so it cannot be called from interrupt
> > > context. Not even with care.
> > > 
> > > Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> > > ---
> > >  kernel/irq/manage.c |    3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > > 
> > > --- a/kernel/irq/manage.c
> > > +++ b/kernel/irq/manage.c
> > > @@ -96,7 +96,8 @@ EXPORT_SYMBOL(synchronize_hardirq);
> > >   *	to complete before returning. If you use this function while
> > >   *	holding a resource the IRQ handler may need you will deadlock.
> > >   *
> > > - *	This function may be called - with care - from IRQ context.
> > > + *	Can only be called from preemptible code as it might sleep when
> > > + *	an interrupt thread is associated to @irq.
> > >   */
> > >  void synchronize_irq(unsigned int irq)
> > >  {
> > 
> > +	might_sleep();
> > 
> > ?
> 
>   ....
> 
> 	wait_event()
> 	  might_sleep() ...
> 

That's conditional on desc, but sure, that should work in most sane
cases.

[tip:x86/apic] genirq: Fix misleading synchronize_irq() documentation

[tip-bot for Thomas Gleixner]

Commit-ID:  1d21f2af8571c6a6a44e7c1911780614847b0253
Gitweb:     https://git.kernel.org/tip/1d21f2af8571c6a6a44e7c1911780614847b0253
Author:     Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Fri, 28 Jun 2019 13:11:50 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 3 Jul 2019 10:12:29 +0200

genirq: Fix misleading synchronize_irq() documentation

The function might sleep, so it cannot be called from interrupt
context. Not even with care.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.189241552@linutronix.de

---
 kernel/irq/manage.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index dc8b35f2d545..44fc505815d6 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -96,7 +96,8 @@ EXPORT_SYMBOL(synchronize_hardirq);
  *	to complete before returning. If you use this function while
  *	holding a resource the IRQ handler may need you will deadlock.
  *
- *	This function may be called - with care - from IRQ context.
+ *	Can only be called from preemptible code as it might sleep when
+ *	an interrupt thread is associated to @irq.
  */
 void synchronize_irq(unsigned int irq)
 {

[patch V2 3/6] genirq: Add optional hardware synchronization for shutdown

[Thomas Gleixner]

free_irq() ensures that no hardware interrupt handler is executing on a
different CPU before actually releasing resources and deactivating the
interrupt completely in a domain hierarchy.

But that does not catch the case where the interrupt is on flight at the
hardware level but not yet serviced by the target CPU. That creates an
interesing race condition:

   CPU 0                  CPU 1               IRQ CHIP

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     release_resources()
                          do_IRQ()
                            -> resources are not available

That might be harmless and just trigger a spurious interrupt warning, but
some interrupt chips might get into a wedged state.

Utilize the existing irq_get_irqchip_state() callback for the
synchronization in free_irq().

synchronize_hardirq() is not using this mechanism as it might actually
deadlock unter certain conditions, e.g. when called with interrupts
disabled and the target CPU is the one on which the synchronization is
invoked. synchronize_irq() uses it because that function cannot be called
from non preemtible contexts as it might sleep.

No functional change intended and according to Marc the existing GIC
implementations where the driver supports the callback should be able
to cope with that core change. Famous last words.

Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---

V2: Use irq_get_irqchip_state() instead of adding another one...

---
 kernel/irq/internals.h |    4 ++
 kernel/irq/manage.c    |   75 ++++++++++++++++++++++++++++++++++++-------------
 2 files changed, 60 insertions(+), 19 deletions(-)

--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -97,6 +97,10 @@ static inline void irq_mark_irq(unsigned
 extern void irq_mark_irq(unsigned int irq);
 #endif
 
+extern int __irq_get_irqchip_state(struct irq_data *data,
+				   enum irqchip_irq_state which,
+				   bool *state);
+
 extern void init_kstat_irqs(struct irq_desc *desc, int node, int nr);
 
 irqreturn_t __handle_irq_event_percpu(struct irq_desc *desc, unsigned int *flags);
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -35,8 +35,9 @@ static int __init setup_forced_irqthread
 early_param("threadirqs", setup_forced_irqthreads);
 #endif
 
-static void __synchronize_hardirq(struct irq_desc *desc)
+static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
 {
+	struct irq_data *irqd = irq_desc_get_irq_data(desc);
 	bool inprogress;
 
 	do {
@@ -52,6 +53,20 @@ static void __synchronize_hardirq(struct
 		/* Ok, that indicated we're done: double-check carefully. */
 		raw_spin_lock_irqsave(&desc->lock, flags);
 		inprogress = irqd_irq_inprogress(&desc->irq_data);
+
+		/*
+		 * If requested and supported, check at the chip whether it
+		 * is in flight at the hardware level, i.e. already pending
+		 * in a CPU and waiting for service and acknowledge.
+		 */
+		if (!inprogress && sync_chip) {
+			/*
+			 * Ignore the return code. inprogress is only updated
+			 * when the chip supports it.
+			 */
+			__irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
+						&inprogress);
+		}
 		raw_spin_unlock_irqrestore(&desc->lock, flags);
 
 		/* Oops, that failed? */
@@ -74,13 +89,18 @@ static void __synchronize_hardirq(struct
  *	Returns: false if a threaded handler is active.
  *
  *	This function may be called - with care - from IRQ context.
+ *
+ *	It does not check whether there is an interrupt on flight at the
+ *	hardware level, but not serviced yet, as this might deadlock when
+ *	called with interrupts disabled and the target CPU of the interrupt
+ *	is the current CPU.
  */
 bool synchronize_hardirq(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 
 	if (desc) {
-		__synchronize_hardirq(desc);
+		__synchronize_hardirq(desc, false);
 		return !atomic_read(&desc->threads_active);
 	}
 
@@ -98,13 +118,17 @@ EXPORT_SYMBOL(synchronize_hardirq);
  *
  *	Can only be called from preemptible code as it might sleep when
  *	an interrupt thread is associated to @irq.
+ *
+ *	It optionally makes sure (when the irq chip supports that method)
+ *	that the interrupt is not pending in any CPU and waiting for
+ *	service.
  */
 void synchronize_irq(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 
 	if (desc) {
-		__synchronize_hardirq(desc);
+		__synchronize_hardirq(desc, true);
 		/*
 		 * We made sure that no hardirq handler is
 		 * running. Now verify that no threaded handlers are
@@ -1730,8 +1754,12 @@ static struct irqaction *__free_irq(stru
 
 	unregister_handler_proc(irq, action);
 
-	/* Make sure it's not being used on another CPU: */
-	synchronize_hardirq(irq);
+	/*
+	 * Make sure it's not being used on another CPU and if the chip
+	 * supports it also make sure that there is no (not yet serviced)
+	 * interrupt on flight at the hardware level.
+	 */
+	__synchronize_hardirq(desc, true);
 
 #ifdef CONFIG_DEBUG_SHIRQ
 	/*
@@ -2589,6 +2617,28 @@ void teardown_percpu_nmi(unsigned int ir
 	irq_put_desc_unlock(desc, flags);
 }
 
+int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which,
+			    bool *state)
+{
+	struct irq_chip *chip;
+	int err = -EINVAL;
+
+	do {
+		chip = irq_data_get_irq_chip(data);
+		if (chip->irq_get_irqchip_state)
+			break;
+#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
+		data = data->parent_data;
+#else
+		data = NULL;
+#endif
+	} while (data);
+
+	if (data)
+		err = chip->irq_get_irqchip_state(data, which, state);
+	return err;
+}
+
 /**
  *	irq_get_irqchip_state - returns the irqchip state of a interrupt.
  *	@irq: Interrupt line that is forwarded to a VM
@@ -2607,7 +2657,6 @@ int irq_get_irqchip_state(unsigned int i
 {
 	struct irq_desc *desc;
 	struct irq_data *data;
-	struct irq_chip *chip;
 	unsigned long flags;
 	int err = -EINVAL;
 
@@ -2617,19 +2666,7 @@ int irq_get_irqchip_state(unsigned int i
 
 	data = irq_desc_get_irq_data(desc);
 
-	do {
-		chip = irq_data_get_irq_chip(data);
-		if (chip->irq_get_irqchip_state)
-			break;
-#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
-		data = data->parent_data;
-#else
-		data = NULL;
-#endif
-	} while (data);
-
-	if (data)
-		err = chip->irq_get_irqchip_state(data, which, state);
+	err = __irq_get_irqchip_state(data, which, state);
 
 	irq_put_desc_busunlock(desc, flags);
 	return err;

Re: [patch V2 3/6] genirq: Add optional hardware synchronization for shutdown

[Marc Zyngier]

On 28/06/2019 12:11, Thomas Gleixner wrote:
> free_irq() ensures that no hardware interrupt handler is executing on a
> different CPU before actually releasing resources and deactivating the
> interrupt completely in a domain hierarchy.
> 
> But that does not catch the case where the interrupt is on flight at the
> hardware level but not yet serviced by the target CPU. That creates an
> interesing race condition:
> 
>    CPU 0                  CPU 1               IRQ CHIP
> 
>                                               interrupt is raised
>                                               sent to CPU1
> 			  Unable to handle
> 			  immediately
> 			  (interrupts off,
> 			   deep idle delay)
>    mask()
>    ...
>    free()
>      shutdown()
>      synchronize_irq()
>      release_resources()
>                           do_IRQ()
>                             -> resources are not available
> 
> That might be harmless and just trigger a spurious interrupt warning, but
> some interrupt chips might get into a wedged state.
> 
> Utilize the existing irq_get_irqchip_state() callback for the
> synchronization in free_irq().
> 
> synchronize_hardirq() is not using this mechanism as it might actually
> deadlock unter certain conditions, e.g. when called with interrupts
> disabled and the target CPU is the one on which the synchronization is
> invoked. synchronize_irq() uses it because that function cannot be called
> from non preemtible contexts as it might sleep.
> 
> No functional change intended and according to Marc the existing GIC
> implementations where the driver supports the callback should be able
> to cope with that core change. Famous last words.

I still stand by what I've said! I gave it a go on a small sample of my
 home zoo, and nothing caught fire (although it is not exactly easy to
trigger a situation where the additional synchronization would be useful).

> 
> Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
> Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

FWIW:

Reviewed-and-tested-by: Marc Zyngier <marc.zyngier@arm.com>

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [patch V2 3/6] genirq: Add optional hardware synchronization for shutdown

[Peter Zijlstra]

On Fri, Jun 28, 2019 at 01:11:51PM +0200, Thomas Gleixner wrote:
> But that does not catch the case where the interrupt is on flight at the
> hardware level but not yet serviced by the target CPU. That creates an
> interesing race condition:

> + *	It does not check whether there is an interrupt on flight at the
> + *	hardware level, but not serviced yet, as this might deadlock when
> + *	called with interrupts disabled and the target CPU of the interrupt
> + *	is the current CPU.

> +	/*
> +	 * Make sure it's not being used on another CPU and if the chip
> +	 * supports it also make sure that there is no (not yet serviced)
> +	 * interrupt on flight at the hardware level.
> +	 */
> +	__synchronize_hardirq(desc, true);

s/on flight/in flight/ ?

Re: [patch V2 3/6] genirq: Add optional hardware synchronization for shutdown

[Thomas Gleixner]

On Mon, 1 Jul 2019, Peter Zijlstra wrote:

> On Fri, Jun 28, 2019 at 01:11:51PM +0200, Thomas Gleixner wrote:
> > But that does not catch the case where the interrupt is on flight at the
> > hardware level but not yet serviced by the target CPU. That creates an
> > interesing race condition:
> 
> > + *	It does not check whether there is an interrupt on flight at the
> > + *	hardware level, but not serviced yet, as this might deadlock when
> > + *	called with interrupts disabled and the target CPU of the interrupt
> > + *	is the current CPU.
> 
> > +	/*
> > +	 * Make sure it's not being used on another CPU and if the chip
> > +	 * supports it also make sure that there is no (not yet serviced)
> > +	 * interrupt on flight at the hardware level.
> > +	 */
> > +	__synchronize_hardirq(desc, true);
> 
> s/on flight/in flight/ ?

yes

[tip:x86/apic] genirq: Add optional hardware synchronization for shutdown

[tip-bot for Thomas Gleixner]

Commit-ID:  62e0468650c30f0298822c580f382b16328119f6
Gitweb:     https://git.kernel.org/tip/62e0468650c30f0298822c580f382b16328119f6
Author:     Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Fri, 28 Jun 2019 13:11:51 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 3 Jul 2019 10:12:29 +0200

genirq: Add optional hardware synchronization for shutdown

free_irq() ensures that no hardware interrupt handler is executing on a
different CPU before actually releasing resources and deactivating the
interrupt completely in a domain hierarchy.

But that does not catch the case where the interrupt is on flight at the
hardware level but not yet serviced by the target CPU. That creates an
interesing race condition:

   CPU 0                  CPU 1               IRQ CHIP

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     release_resources()
                          do_IRQ()
                            -> resources are not available

That might be harmless and just trigger a spurious interrupt warning, but
some interrupt chips might get into a wedged state.

Utilize the existing irq_get_irqchip_state() callback for the
synchronization in free_irq().

synchronize_hardirq() is not using this mechanism as it might actually
deadlock unter certain conditions, e.g. when called with interrupts
disabled and the target CPU is the one on which the synchronization is
invoked. synchronize_irq() uses it because that function cannot be called
from non preemtible contexts as it might sleep.

No functional change intended and according to Marc the existing GIC
implementations where the driver supports the callback should be able
to cope with that core change. Famous last words.

Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.279463375@linutronix.de

---
 kernel/irq/internals.h |  4 +++
 kernel/irq/manage.c    | 75 +++++++++++++++++++++++++++++++++++++-------------
 2 files changed, 60 insertions(+), 19 deletions(-)

diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 9c957f8b1198..3a948f41ab00 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -97,6 +97,10 @@ static inline void irq_mark_irq(unsigned int irq) { }
 extern void irq_mark_irq(unsigned int irq);
 #endif
 
+extern int __irq_get_irqchip_state(struct irq_data *data,
+				   enum irqchip_irq_state which,
+				   bool *state);
+
 extern void init_kstat_irqs(struct irq_desc *desc, int node, int nr);
 
 irqreturn_t __handle_irq_event_percpu(struct irq_desc *desc, unsigned int *flags);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 44fc505815d6..fad61986f35c 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -35,8 +35,9 @@ static int __init setup_forced_irqthreads(char *arg)
 early_param("threadirqs", setup_forced_irqthreads);
 #endif
 
-static void __synchronize_hardirq(struct irq_desc *desc)
+static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
 {
+	struct irq_data *irqd = irq_desc_get_irq_data(desc);
 	bool inprogress;
 
 	do {
@@ -52,6 +53,20 @@ static void __synchronize_hardirq(struct irq_desc *desc)
 		/* Ok, that indicated we're done: double-check carefully. */
 		raw_spin_lock_irqsave(&desc->lock, flags);
 		inprogress = irqd_irq_inprogress(&desc->irq_data);
+
+		/*
+		 * If requested and supported, check at the chip whether it
+		 * is in flight at the hardware level, i.e. already pending
+		 * in a CPU and waiting for service and acknowledge.
+		 */
+		if (!inprogress && sync_chip) {
+			/*
+			 * Ignore the return code. inprogress is only updated
+			 * when the chip supports it.
+			 */
+			__irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
+						&inprogress);
+		}
 		raw_spin_unlock_irqrestore(&desc->lock, flags);
 
 		/* Oops, that failed? */
@@ -74,13 +89,18 @@ static void __synchronize_hardirq(struct irq_desc *desc)
  *	Returns: false if a threaded handler is active.
  *
  *	This function may be called - with care - from IRQ context.
+ *
+ *	It does not check whether there is an interrupt in flight at the
+ *	hardware level, but not serviced yet, as this might deadlock when
+ *	called with interrupts disabled and the target CPU of the interrupt
+ *	is the current CPU.
  */
 bool synchronize_hardirq(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 
 	if (desc) {
-		__synchronize_hardirq(desc);
+		__synchronize_hardirq(desc, false);
 		return !atomic_read(&desc->threads_active);
 	}
 
@@ -98,13 +118,17 @@ EXPORT_SYMBOL(synchronize_hardirq);
  *
  *	Can only be called from preemptible code as it might sleep when
  *	an interrupt thread is associated to @irq.
+ *
+ *	It optionally makes sure (when the irq chip supports that method)
+ *	that the interrupt is not pending in any CPU and waiting for
+ *	service.
  */
 void synchronize_irq(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 
 	if (desc) {
-		__synchronize_hardirq(desc);
+		__synchronize_hardirq(desc, true);
 		/*
 		 * We made sure that no hardirq handler is
 		 * running. Now verify that no threaded handlers are
@@ -1730,8 +1754,12 @@ static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
 
 	unregister_handler_proc(irq, action);
 
-	/* Make sure it's not being used on another CPU: */
-	synchronize_hardirq(irq);
+	/*
+	 * Make sure it's not being used on another CPU and if the chip
+	 * supports it also make sure that there is no (not yet serviced)
+	 * interrupt in flight at the hardware level.
+	 */
+	__synchronize_hardirq(desc, true);
 
 #ifdef CONFIG_DEBUG_SHIRQ
 	/*
@@ -2589,6 +2617,28 @@ out:
 	irq_put_desc_unlock(desc, flags);
 }
 
+int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which,
+			    bool *state)
+{
+	struct irq_chip *chip;
+	int err = -EINVAL;
+
+	do {
+		chip = irq_data_get_irq_chip(data);
+		if (chip->irq_get_irqchip_state)
+			break;
+#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
+		data = data->parent_data;
+#else
+		data = NULL;
+#endif
+	} while (data);
+
+	if (data)
+		err = chip->irq_get_irqchip_state(data, which, state);
+	return err;
+}
+
 /**
  *	irq_get_irqchip_state - returns the irqchip state of a interrupt.
  *	@irq: Interrupt line that is forwarded to a VM
@@ -2607,7 +2657,6 @@ int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
 {
 	struct irq_desc *desc;
 	struct irq_data *data;
-	struct irq_chip *chip;
 	unsigned long flags;
 	int err = -EINVAL;
 
@@ -2617,19 +2666,7 @@ int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
 
 	data = irq_desc_get_irq_data(desc);
 
-	do {
-		chip = irq_data_get_irq_chip(data);
-		if (chip->irq_get_irqchip_state)
-			break;
-#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
-		data = data->parent_data;
-#else
-		data = NULL;
-#endif
-	} while (data);
-
-	if (data)
-		err = chip->irq_get_irqchip_state(data, which, state);
+	err = __irq_get_irqchip_state(data, which, state);
 
 	irq_put_desc_busunlock(desc, flags);
 	return err;

[patch V2 4/6] x86/ioapic: Implement irq_get_irqchip_state() callback

[Thomas Gleixner]

When an interrupt is shut down in free_irq() there might be an inflight
interrupt pending in the IO-APIC remote IRR which is not yet serviced. That
means the interrupt has been sent to the target CPUs local APIC, but the
target CPU is in a state which delays the servicing.

So free_irq() would proceed to free resources and to clear the vector
because synchronize_hardirq() does not see an interrupt handler in
progress.

That can trigger a spurious interrupt warning, which is harmless and just
confuses users, but it also can leave the remote IRR in a stale state
because once the handler is invoked the interrupt resources might be freed
already and therefore acknowledgement is not possible anymore.

Implement the irq_get_irqchip_state() callback for the IO-APIC irq chip. The
callback is invoked from free_irq() via __synchronize_hardirq(). Check the
remote IRR bit of the interrupt and return 'in flight' if it is set and the
interrupt is configured in level mode. For edge mode the remote IRR has no
meaning.

As this is only meaningful for level triggered interrupts this won't cure
the potential spurious interrupt warning for edge triggered interrupts, but
the edge trigger case does not result in stale hardware state. This has to
be addressed at the vector/interrupt entry level seperately.

Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---

V2: Use irq_get_irqchip_state()

---
 arch/x86/kernel/apic/io_apic.c |   46 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1893,6 +1893,50 @@ static int ioapic_set_affinity(struct ir
 	return ret;
 }
 
+/*
+ * Interrupt shutdown masks the ioapic pin, but the interrupt might already
+ * be on flight, but not yet serviced by the target CPU. That means
+ * __synchronize_hardirq() would return and claim that everything is calmed
+ * down. So free_irq() would proceed and deactivate the interrupt and free
+ * resources.
+ *
+ * Once the target CPU comes around to service it it will find a cleared
+ * vector and complain. While the spurious interrupt is harmless, the full
+ * release of resources might prevent the interrupt from being acknowledged
+ * which keeps the hardware in a weird state.
+ *
+ * Verify that the corresponding Remote-IRR bits are clear.
+ */
+static int ioapic_irq_get_chip_state(struct irq_data *irqd,
+				   enum irqchip_irq_state which,
+				   bool *state)
+{
+	struct mp_chip_data *mcd = irqd->chip_data;
+	struct IO_APIC_route_entry rentry;
+	struct irq_pin_list *p;
+
+	if (which != IRQCHIP_STATE_ACTIVE)
+		return -EINVAL;
+
+	*state = false;
+	raw_spin_lock(&ioapic_lock);
+	for_each_irq_pin(p, mcd->irq_2_pin) {
+		rentry = __ioapic_read_entry(p->apic, p->pin);
+		/*
+		 * The remote IRR is only valid in level trigger mode. It's
+		 * meaning is undefined for edge triggered interrupts and
+		 * irrelevant because the IO-APIC treats them as fire and
+		 * forget.
+		 */
+		if (rentry.irr && rentry.trigger) {
+			*state = true;
+			break;
+		}
+	}
+	raw_spin_unlock(&ioapic_lock);
+	return 0;
+}
+
 static struct irq_chip ioapic_chip __read_mostly = {
 	.name			= "IO-APIC",
 	.irq_startup		= startup_ioapic_irq,
@@ -1902,6 +1946,7 @@ static struct irq_chip ioapic_chip __rea
 	.irq_eoi		= ioapic_ack_level,
 	.irq_set_affinity	= ioapic_set_affinity,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_get_irqchip_state	= ioapic_irq_get_chip_state,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
@@ -1914,6 +1959,7 @@ static struct irq_chip ioapic_ir_chip __
 	.irq_eoi		= ioapic_ir_ack_level,
 	.irq_set_affinity	= ioapic_set_affinity,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_get_irqchip_state	= ioapic_irq_get_chip_state,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 

[tip:x86/apic] x86/ioapic: Implement irq_get_irqchip_state() callback

[tip-bot for Thomas Gleixner]

Commit-ID:  dfe0cf8b51b07e56ded571e3de0a4a9382517231
Gitweb:     https://git.kernel.org/tip/dfe0cf8b51b07e56ded571e3de0a4a9382517231
Author:     Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Fri, 28 Jun 2019 13:11:52 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 3 Jul 2019 10:12:30 +0200

x86/ioapic: Implement irq_get_irqchip_state() callback

When an interrupt is shut down in free_irq() there might be an inflight
interrupt pending in the IO-APIC remote IRR which is not yet serviced. That
means the interrupt has been sent to the target CPUs local APIC, but the
target CPU is in a state which delays the servicing.

So free_irq() would proceed to free resources and to clear the vector
because synchronize_hardirq() does not see an interrupt handler in
progress.

That can trigger a spurious interrupt warning, which is harmless and just
confuses users, but it also can leave the remote IRR in a stale state
because once the handler is invoked the interrupt resources might be freed
already and therefore acknowledgement is not possible anymore.

Implement the irq_get_irqchip_state() callback for the IO-APIC irq chip. The
callback is invoked from free_irq() via __synchronize_hardirq(). Check the
remote IRR bit of the interrupt and return 'in flight' if it is set and the
interrupt is configured in level mode. For edge mode the remote IRR has no
meaning.

As this is only meaningful for level triggered interrupts this won't cure
the potential spurious interrupt warning for edge triggered interrupts, but
the edge trigger case does not result in stale hardware state. This has to
be addressed at the vector/interrupt entry level seperately.

Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.370295517@linutronix.de

---
 arch/x86/kernel/apic/io_apic.c | 46 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 1bb864798800..c7bb6c69f21c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1894,6 +1894,50 @@ static int ioapic_set_affinity(struct irq_data *irq_data,
 	return ret;
 }
 
+/*
+ * Interrupt shutdown masks the ioapic pin, but the interrupt might already
+ * be in flight, but not yet serviced by the target CPU. That means
+ * __synchronize_hardirq() would return and claim that everything is calmed
+ * down. So free_irq() would proceed and deactivate the interrupt and free
+ * resources.
+ *
+ * Once the target CPU comes around to service it it will find a cleared
+ * vector and complain. While the spurious interrupt is harmless, the full
+ * release of resources might prevent the interrupt from being acknowledged
+ * which keeps the hardware in a weird state.
+ *
+ * Verify that the corresponding Remote-IRR bits are clear.
+ */
+static int ioapic_irq_get_chip_state(struct irq_data *irqd,
+				   enum irqchip_irq_state which,
+				   bool *state)
+{
+	struct mp_chip_data *mcd = irqd->chip_data;
+	struct IO_APIC_route_entry rentry;
+	struct irq_pin_list *p;
+
+	if (which != IRQCHIP_STATE_ACTIVE)
+		return -EINVAL;
+
+	*state = false;
+	raw_spin_lock(&ioapic_lock);
+	for_each_irq_pin(p, mcd->irq_2_pin) {
+		rentry = __ioapic_read_entry(p->apic, p->pin);
+		/*
+		 * The remote IRR is only valid in level trigger mode. It's
+		 * meaning is undefined for edge triggered interrupts and
+		 * irrelevant because the IO-APIC treats them as fire and
+		 * forget.
+		 */
+		if (rentry.irr && rentry.trigger) {
+			*state = true;
+			break;
+		}
+	}
+	raw_spin_unlock(&ioapic_lock);
+	return 0;
+}
+
 static struct irq_chip ioapic_chip __read_mostly = {
 	.name			= "IO-APIC",
 	.irq_startup		= startup_ioapic_irq,
@@ -1903,6 +1947,7 @@ static struct irq_chip ioapic_chip __read_mostly = {
 	.irq_eoi		= ioapic_ack_level,
 	.irq_set_affinity	= ioapic_set_affinity,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_get_irqchip_state	= ioapic_irq_get_chip_state,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
@@ -1915,6 +1960,7 @@ static struct irq_chip ioapic_ir_chip __read_mostly = {
 	.irq_eoi		= ioapic_ir_ack_level,
 	.irq_set_affinity	= ioapic_set_affinity,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_get_irqchip_state	= ioapic_irq_get_chip_state,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 

[patch V2 5/6] x86/irq: Handle spurious interrupt after shutdown gracefully

[Thomas Gleixner]

Since the rework of the vector management, warnings about spurious
interrupts have been reported. Robert provided some more information and
did an initial analysis. The following situation leads to these warnings:

   CPU 0                  CPU 1               IO_APIC

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     clear_vector()
                          do_IRQ()
                            -> vector is clear

Before the rework the vector entries of legacy interrupts were statically
assigned and occupied precious vector space while most of them were
unused. Due to that the above situation was handled silently because the
vector was handled and the core handler of the assigned interrupt
descriptor noticed that it is shut down and returned.

While this has been usually observed with legacy interrupts, this situation
is not limited to them. Any other interrupt source, e.g. MSI, can cause the
same issue.

After adding proper synchronization for level triggered interrupts, this
can only happen for edge triggered interrupts where the IO-APIC obviously
cannot provide information about interrupts in flight.

While the spurious warning is actually harmless in this case it worries
users and driver developers.

Handle it gracefully by marking the vector entry as VECTOR_SHUTDOWN instead
of VECTOR_UNUSED when the vector is freed up.

If that above late handling happens the spurious detector will not complain
and switch the entry to VECTOR_UNUSED. Any subsequent spurious interrupt on
that line will trigger the spurious warning as before.

Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>-
Tested-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
---

V2: Picked up Tested-by from Robert.

---
 arch/x86/include/asm/hw_irq.h |    3 ++-
 arch/x86/kernel/apic/vector.c |    4 ++--
 arch/x86/kernel/irq.c         |    2 +-
 3 files changed, 5 insertions(+), 4 deletions(-)

--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -151,7 +151,8 @@ extern char irq_entries_start[];
 #endif
 
 #define VECTOR_UNUSED		NULL
-#define VECTOR_RETRIGGERED	((void *)~0UL)
+#define VECTOR_SHUTDOWN		((void *)~0UL)
+#define VECTOR_RETRIGGERED	((void *)~1UL)
 
 typedef struct irq_desc* vector_irq_t[NR_VECTORS];
 DECLARE_PER_CPU(vector_irq_t, vector_irq);
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -340,7 +340,7 @@ static void clear_irq_vector(struct irq_
 	trace_vector_clear(irqd->irq, vector, apicd->cpu, apicd->prev_vector,
 			   apicd->prev_cpu);
 
-	per_cpu(vector_irq, apicd->cpu)[vector] = VECTOR_UNUSED;
+	per_cpu(vector_irq, apicd->cpu)[vector] = VECTOR_SHUTDOWN;
 	irq_matrix_free(vector_matrix, apicd->cpu, vector, managed);
 	apicd->vector = 0;
 
@@ -349,7 +349,7 @@ static void clear_irq_vector(struct irq_
 	if (!vector)
 		return;
 
-	per_cpu(vector_irq, apicd->prev_cpu)[vector] = VECTOR_UNUSED;
+	per_cpu(vector_irq, apicd->prev_cpu)[vector] = VECTOR_SHUTDOWN;
 	irq_matrix_free(vector_matrix, apicd->prev_cpu, vector, managed);
 	apicd->prev_vector = 0;
 	apicd->move_in_progress = 0;
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -247,7 +247,7 @@ u64 arch_irq_stat(void)
 	if (!handle_irq(desc, regs)) {
 		ack_APIC_irq();
 
-		if (desc != VECTOR_RETRIGGERED) {
+		if (desc != VECTOR_RETRIGGERED && desc != VECTOR_SHUTDOWN) {
 			pr_emerg_ratelimited("%s: %d.%d No irq handler for vector\n",
 					     __func__, smp_processor_id(),
 					     vector);

[tip:x86/apic] x86/irq: Handle spurious interrupt after shutdown gracefully

[tip-bot for Thomas Gleixner]

Commit-ID:  b7107a67f0d125459fe41f86e8079afd1a5e0b15
Gitweb:     https://git.kernel.org/tip/b7107a67f0d125459fe41f86e8079afd1a5e0b15
Author:     Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Fri, 28 Jun 2019 13:11:53 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 3 Jul 2019 10:12:30 +0200

x86/irq: Handle spurious interrupt after shutdown gracefully

Since the rework of the vector management, warnings about spurious
interrupts have been reported. Robert provided some more information and
did an initial analysis. The following situation leads to these warnings:

   CPU 0                  CPU 1               IO_APIC

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     clear_vector()
                          do_IRQ()
                            -> vector is clear

Before the rework the vector entries of legacy interrupts were statically
assigned and occupied precious vector space while most of them were
unused. Due to that the above situation was handled silently because the
vector was handled and the core handler of the assigned interrupt
descriptor noticed that it is shut down and returned.

While this has been usually observed with legacy interrupts, this situation
is not limited to them. Any other interrupt source, e.g. MSI, can cause the
same issue.

After adding proper synchronization for level triggered interrupts, this
can only happen for edge triggered interrupts where the IO-APIC obviously
cannot provide information about interrupts in flight.

While the spurious warning is actually harmless in this case it worries
users and driver developers.

Handle it gracefully by marking the vector entry as VECTOR_SHUTDOWN instead
of VECTOR_UNUSED when the vector is freed up.

If that above late handling happens the spurious detector will not complain
and switch the entry to VECTOR_UNUSED. Any subsequent spurious interrupt on
that line will trigger the spurious warning as before.

Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>-
Tested-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.459647741@linutronix.de

---
 arch/x86/include/asm/hw_irq.h | 3 ++-
 arch/x86/kernel/apic/vector.c | 4 ++--
 arch/x86/kernel/irq.c         | 2 +-
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 32e666e1231e..626e1ac6516e 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -151,7 +151,8 @@ extern char irq_entries_start[];
 #endif
 
 #define VECTOR_UNUSED		NULL
-#define VECTOR_RETRIGGERED	((void *)~0UL)
+#define VECTOR_SHUTDOWN		((void *)~0UL)
+#define VECTOR_RETRIGGERED	((void *)~1UL)
 
 typedef struct irq_desc* vector_irq_t[NR_VECTORS];
 DECLARE_PER_CPU(vector_irq_t, vector_irq);
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 3173e07d3791..1c6d1d5f28d3 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -343,7 +343,7 @@ static void clear_irq_vector(struct irq_data *irqd)
 	trace_vector_clear(irqd->irq, vector, apicd->cpu, apicd->prev_vector,
 			   apicd->prev_cpu);
 
-	per_cpu(vector_irq, apicd->cpu)[vector] = VECTOR_UNUSED;
+	per_cpu(vector_irq, apicd->cpu)[vector] = VECTOR_SHUTDOWN;
 	irq_matrix_free(vector_matrix, apicd->cpu, vector, managed);
 	apicd->vector = 0;
 
@@ -352,7 +352,7 @@ static void clear_irq_vector(struct irq_data *irqd)
 	if (!vector)
 		return;
 
-	per_cpu(vector_irq, apicd->prev_cpu)[vector] = VECTOR_UNUSED;
+	per_cpu(vector_irq, apicd->prev_cpu)[vector] = VECTOR_SHUTDOWN;
 	irq_matrix_free(vector_matrix, apicd->prev_cpu, vector, managed);
 	apicd->prev_vector = 0;
 	apicd->move_in_progress = 0;
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 59b5f2ea7c2f..a975246074b5 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -246,7 +246,7 @@ __visible unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 	if (!handle_irq(desc, regs)) {
 		ack_APIC_irq();
 
-		if (desc != VECTOR_RETRIGGERED) {
+		if (desc != VECTOR_RETRIGGERED && desc != VECTOR_SHUTDOWN) {
 			pr_emerg_ratelimited("%s: %d.%d No irq handler for vector\n",
 					     __func__, smp_processor_id(),
 					     vector);

[patch V2 6/6] x86/irq: Seperate unused system vectors from spurious entry again

[Thomas Gleixner]

Quite some time ago the interrupt entry stubs for unused vectors in the
system vector range got removed and directly mapped to the spurious
interrupt vector entry point.

Sounds reasonable, but it's subtly broken. The spurious interrupt vector
entry point pushes vector number 0xFF on the stack which makes the whole
logic in __smp_spurious_interrupt() pointless.

As a consequence any spurious interrupt which comes from a vector != 0xFF
is treated as a real spurious interrupt (vector 0xFF) and not
acknowledged. That subsequently stalls all interrupt vectors of equal and
lower priority, which brings the system to a grinding halt.

This can happen because even on 64-bit the system vector space is not
guaranteed to be fully populated. A full compile time handling of the
unused vectors is not possible because quite some of them are conditonally
populated at runtime.

Bring the entry stubs back, which wastes 160 bytes if all stubs are unused,
but gains the proper handling back. There is no point to selectively spare
some of the stubs which are known at compile time as the required code in
the IDT management would be way larger and convoluted.

Do not route the spurious entries through common_interrupt and do_IRQ() as
the original code did. Route it to smp_spurious_interrupt() which evaluates
the vector number and acts accordingly now that the real vector numbers are
handed in.

Fixup the pr_warn so the actual spurious vector (0xff) is clearly
distiguished from the other vectors and also note for the vectored case
whether it was pending in the ISR or not.

 "Spurious APIC interrupt (vector 0xFF) on CPU#0, should never happen."
 "Spurious interrupt vector 0xed on CPU#1. Acked."
 "Spurious interrupt vector 0xee on CPU#1. Not pending!."

Fixes: 2414e021ac8d ("x86: Avoid building unused IRQ entry stubs")
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jan Beulich <jbeulich@suse.com>
---
 arch/x86/entry/entry_32.S     |   24 ++++++++++++++++++++++++
 arch/x86/entry/entry_64.S     |   30 ++++++++++++++++++++++++++----
 arch/x86/include/asm/hw_irq.h |    2 ++
 arch/x86/kernel/apic/apic.c   |   33 ++++++++++++++++++++++-----------
 arch/x86/kernel/idt.c         |    3 ++-
 5 files changed, 76 insertions(+), 16 deletions(-)

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1104,6 +1104,30 @@ ENTRY(irq_entries_start)
     .endr
 END(irq_entries_start)
 
+#ifdef CONFIG_X86_LOCAL_APIC
+	.align 8
+ENTRY(spurious_entries_start)
+    vector=FIRST_SYSTEM_VECTOR
+    .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
+	pushl	$(~vector+0x80)			/* Note: always in signed byte range */
+    vector=vector+1
+	jmp	common_spurious
+	.align	8
+    .endr
+END(spurious_entries_start)
+
+common_spurious:
+	ASM_CLAC
+	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
+	SAVE_ALL switch_stacks=1
+	ENCODE_FRAME_POINTER
+	TRACE_IRQS_OFF
+	movl	%esp, %eax
+	call	smp_spurious_interrupt
+	jmp	ret_from_intr
+ENDPROC(common_interrupt)
+#endif
+
 /*
  * the CPU automatically disables interrupts when executing an IRQ vector,
  * so IRQ-flags tracing has to follow that:
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -375,6 +375,18 @@ ENTRY(irq_entries_start)
     .endr
 END(irq_entries_start)
 
+	.align 8
+ENTRY(spurious_entries_start)
+    vector=FIRST_SYSTEM_VECTOR
+    .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
+	UNWIND_HINT_IRET_REGS
+	pushq	$(~vector+0x80)			/* Note: always in signed byte range */
+	jmp	common_spurious
+	.align	8
+	vector=vector+1
+    .endr
+END(spurious_entries_start)
+
 .macro DEBUG_ENTRY_ASSERT_IRQS_OFF
 #ifdef CONFIG_DEBUG_ENTRY
 	pushq %rax
@@ -571,10 +583,20 @@ END(interrupt_entry)
 
 /* Interrupt entry/exit. */
 
-	/*
-	 * The interrupt stubs push (~vector+0x80) onto the stack and
-	 * then jump to common_interrupt.
-	 */
+/*
+ * The interrupt stubs push (~vector+0x80) onto the stack and
+ * then jump to common_spurious/interrupt.
+ */
+common_spurious:
+	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
+	call	interrupt_entry
+	UNWIND_HINT_REGS indirect=1
+	call	smp_spurious_interrupt		/* rdi points to pt_regs */
+	jmp	ret_from_intr
+END(common_spurious)
+_ASM_NOKPROBE(common_spurious)
+
+/* common_interrupt is a hotpath. Align it */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -150,6 +150,8 @@ extern char irq_entries_start[];
 #define trace_irq_entries_start irq_entries_start
 #endif
 
+extern char spurious_entries_start[];
+
 #define VECTOR_UNUSED		NULL
 #define VECTOR_SHUTDOWN		((void *)~0UL)
 #define VECTOR_RETRIGGERED	((void *)~1UL)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2040,21 +2040,32 @@ void __init register_lapic_address(unsig
 	entering_irq();
 	trace_spurious_apic_entry(vector);
 
+	inc_irq_stat(irq_spurious_count);
+
+	/*
+	 * If this is a spurious interrupt then do not acknowledge
+	 */
+	if (vector == SPURIOUS_APIC_VECTOR) {
+		/* See SDM vol 3 */
+		pr_info("Spurious APIC interrupt (vector 0xFF) on CPU#%d, should never happen.\n",
+			smp_processor_id());
+		goto out;
+	}
+
 	/*
-	 * Check if this really is a spurious interrupt and ACK it
-	 * if it is a vectored one.  Just in case...
-	 * Spurious interrupts should not be ACKed.
+	 * If it is a vectored one, verify it's set in the ISR. If set,
+	 * acknowledge it.
 	 */
 	v = apic_read(APIC_ISR + ((vector & ~0x1f) >> 1));
-	if (v & (1 << (vector & 0x1f)))
+	if (v & (1 << (vector & 0x1f))) {
+		pr_info("Spurious interrupt (vector 0x%02x) on CPU#%d. Acked\n",
+			vector, smp_processor_id());
 		ack_APIC_irq();
-
-	inc_irq_stat(irq_spurious_count);
-
-	/* see sw-dev-man vol 3, chapter 7.4.13.5 */
-	pr_info("spurious APIC interrupt through vector %02x on CPU#%d, "
-		"should never happen.\n", vector, smp_processor_id());
-
+	} else {
+		pr_info("Spurious interrupt (vector 0x%02x) on CPU#%d. Not pending!\n",
+			vector, smp_processor_id());
+	}
+out:
 	trace_spurious_apic_exit(vector);
 	exiting_irq();
 }
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -319,7 +319,8 @@ void __init idt_setup_apic_and_irq_gates
 #ifdef CONFIG_X86_LOCAL_APIC
 	for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
 		set_bit(i, system_vectors);
-		set_intr_gate(i, spurious_interrupt);
+		entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR);
+		set_intr_gate(i, entry);
 	}
 #endif
 }

[tip:x86/apic] x86/irq: Seperate unused system vectors from spurious entry again

[tip-bot for Thomas Gleixner]

Commit-ID:  f8a8fe61fec8006575699559ead88b0b833d5cad
Gitweb:     https://git.kernel.org/tip/f8a8fe61fec8006575699559ead88b0b833d5cad
Author:     Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Fri, 28 Jun 2019 13:11:54 +0200
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Wed, 3 Jul 2019 10:12:31 +0200

x86/irq: Seperate unused system vectors from spurious entry again

Quite some time ago the interrupt entry stubs for unused vectors in the
system vector range got removed and directly mapped to the spurious
interrupt vector entry point.

Sounds reasonable, but it's subtly broken. The spurious interrupt vector
entry point pushes vector number 0xFF on the stack which makes the whole
logic in __smp_spurious_interrupt() pointless.

As a consequence any spurious interrupt which comes from a vector != 0xFF
is treated as a real spurious interrupt (vector 0xFF) and not
acknowledged. That subsequently stalls all interrupt vectors of equal and
lower priority, which brings the system to a grinding halt.

This can happen because even on 64-bit the system vector space is not
guaranteed to be fully populated. A full compile time handling of the
unused vectors is not possible because quite some of them are conditonally
populated at runtime.

Bring the entry stubs back, which wastes 160 bytes if all stubs are unused,
but gains the proper handling back. There is no point to selectively spare
some of the stubs which are known at compile time as the required code in
the IDT management would be way larger and convoluted.

Do not route the spurious entries through common_interrupt and do_IRQ() as
the original code did. Route it to smp_spurious_interrupt() which evaluates
the vector number and acts accordingly now that the real vector numbers are
handed in.

Fixup the pr_warn so the actual spurious vector (0xff) is clearly
distiguished from the other vectors and also note for the vectored case
whether it was pending in the ISR or not.

 "Spurious APIC interrupt (vector 0xFF) on CPU#0, should never happen."
 "Spurious interrupt vector 0xed on CPU#1. Acked."
 "Spurious interrupt vector 0xee on CPU#1. Not pending!."

Fixes: 2414e021ac8d ("x86: Avoid building unused IRQ entry stubs")
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jan Beulich <jbeulich@suse.com>
Link: https://lkml.kernel.org/r/20190628111440.550568228@linutronix.de

---
 arch/x86/entry/entry_32.S     | 24 ++++++++++++++++++++++++
 arch/x86/entry/entry_64.S     | 30 ++++++++++++++++++++++++++----
 arch/x86/include/asm/hw_irq.h |  2 ++
 arch/x86/kernel/apic/apic.c   | 33 ++++++++++++++++++++++-----------
 arch/x86/kernel/idt.c         |  3 ++-
 5 files changed, 76 insertions(+), 16 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 7b23431be5cb..44c6e6f54bf7 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1104,6 +1104,30 @@ ENTRY(irq_entries_start)
     .endr
 END(irq_entries_start)
 
+#ifdef CONFIG_X86_LOCAL_APIC
+	.align 8
+ENTRY(spurious_entries_start)
+    vector=FIRST_SYSTEM_VECTOR
+    .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
+	pushl	$(~vector+0x80)			/* Note: always in signed byte range */
+    vector=vector+1
+	jmp	common_spurious
+	.align	8
+    .endr
+END(spurious_entries_start)
+
+common_spurious:
+	ASM_CLAC
+	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
+	SAVE_ALL switch_stacks=1
+	ENCODE_FRAME_POINTER
+	TRACE_IRQS_OFF
+	movl	%esp, %eax
+	call	smp_spurious_interrupt
+	jmp	ret_from_intr
+ENDPROC(common_interrupt)
+#endif
+
 /*
  * the CPU automatically disables interrupts when executing an IRQ vector,
  * so IRQ-flags tracing has to follow that:
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 20e45d9b4e15..6d835991bb23 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -375,6 +375,18 @@ ENTRY(irq_entries_start)
     .endr
 END(irq_entries_start)
 
+	.align 8
+ENTRY(spurious_entries_start)
+    vector=FIRST_SYSTEM_VECTOR
+    .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
+	UNWIND_HINT_IRET_REGS
+	pushq	$(~vector+0x80)			/* Note: always in signed byte range */
+	jmp	common_spurious
+	.align	8
+	vector=vector+1
+    .endr
+END(spurious_entries_start)
+
 .macro DEBUG_ENTRY_ASSERT_IRQS_OFF
 #ifdef CONFIG_DEBUG_ENTRY
 	pushq %rax
@@ -571,10 +583,20 @@ _ASM_NOKPROBE(interrupt_entry)
 
 /* Interrupt entry/exit. */
 
-	/*
-	 * The interrupt stubs push (~vector+0x80) onto the stack and
-	 * then jump to common_interrupt.
-	 */
+/*
+ * The interrupt stubs push (~vector+0x80) onto the stack and
+ * then jump to common_spurious/interrupt.
+ */
+common_spurious:
+	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
+	call	interrupt_entry
+	UNWIND_HINT_REGS indirect=1
+	call	smp_spurious_interrupt		/* rdi points to pt_regs */
+	jmp	ret_from_intr
+END(common_spurious)
+_ASM_NOKPROBE(common_spurious)
+
+/* common_interrupt is a hotpath. Align it */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 626e1ac6516e..cbd97e22d2f3 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -150,6 +150,8 @@ extern char irq_entries_start[];
 #define trace_irq_entries_start irq_entries_start
 #endif
 
+extern char spurious_entries_start[];
+
 #define VECTOR_UNUSED		NULL
 #define VECTOR_SHUTDOWN		((void *)~0UL)
 #define VECTOR_RETRIGGERED	((void *)~1UL)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 29fd50840b55..a5241b209ea5 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2068,21 +2068,32 @@ __visible void __irq_entry smp_spurious_interrupt(struct pt_regs *regs)
 	entering_irq();
 	trace_spurious_apic_entry(vector);
 
+	inc_irq_stat(irq_spurious_count);
+
+	/*
+	 * If this is a spurious interrupt then do not acknowledge
+	 */
+	if (vector == SPURIOUS_APIC_VECTOR) {
+		/* See SDM vol 3 */
+		pr_info("Spurious APIC interrupt (vector 0xFF) on CPU#%d, should never happen.\n",
+			smp_processor_id());
+		goto out;
+	}
+
 	/*
-	 * Check if this really is a spurious interrupt and ACK it
-	 * if it is a vectored one.  Just in case...
-	 * Spurious interrupts should not be ACKed.
+	 * If it is a vectored one, verify it's set in the ISR. If set,
+	 * acknowledge it.
 	 */
 	v = apic_read(APIC_ISR + ((vector & ~0x1f) >> 1));
-	if (v & (1 << (vector & 0x1f)))
+	if (v & (1 << (vector & 0x1f))) {
+		pr_info("Spurious interrupt (vector 0x%02x) on CPU#%d. Acked\n",
+			vector, smp_processor_id());
 		ack_APIC_irq();
-
-	inc_irq_stat(irq_spurious_count);
-
-	/* see sw-dev-man vol 3, chapter 7.4.13.5 */
-	pr_info("spurious APIC interrupt through vector %02x on CPU#%d, "
-		"should never happen.\n", vector, smp_processor_id());
-
+	} else {
+		pr_info("Spurious interrupt (vector 0x%02x) on CPU#%d. Not pending!\n",
+			vector, smp_processor_id());
+	}
+out:
 	trace_spurious_apic_exit(vector);
 	exiting_irq();
 }
diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c
index 6d8917875f44..cc4444cb3898 100644
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -320,7 +320,8 @@ void __init idt_setup_apic_and_irq_gates(void)
 #ifdef CONFIG_X86_LOCAL_APIC
 	for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
 		set_bit(i, system_vectors);
-		set_intr_gate(i, spurious_interrupt);
+		entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR);
+		set_intr_gate(i, entry);
 	}
 #endif
 }