2.6.39-rc5-git2 boot crashs

2.6.39-rc5-git2 boot crashs

[werner]

Pid: 5635, comm: mount Tainted: G         C 
 2.6.39-rc5-git2 #1 System manufacturer System Product 
Name/M2N8-VMX
EIP: 0060:[<c12d01fb>] EFLAGS: 00010246 CPU: 0
EIP is at logfs_drop_inode+0x3c/0x68
EAX: 00000000 EBX: f4db8000 ECX: f4db81f4 EDX: f4db81f4
ESI: f521c000 EDI: f5232c00 EBP: f5199e70 ESP: f5199e68
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process mount (pid: 5635, ti=f5198000 task=f523ae50 
task.ti=f5198000)
Stack:
  c1f2344c f4db8000 f5199e84 c10ea544 ffffffea f5232c00 
f68ac1c0 f5199ec0
  c12d77cd 00000000 00000000 c10ced5c 00000000 f521c000 
00000400 f521c000
  f68a4b40 00000040 000000d0 00000000 f5106cb0 f5106cb0 
f5199ef8 c10d9b11
Call Trace:
  [<c10ea544>] iput+0x5c/0x119
  [<c12d77cd>] logfs_mount+0x44f/0x5cc
  [<c10ced5c>] ? __kmalloc_track_caller+0x9b/0x157
  [<c10d9b11>] mount_fs+0x68/0x13e
  [<c10b1ce3>] ? kstrdup+0x30/0x41
  [<c10ee6c3>] vfs_kern_mount+0x53/0x7f
  [<c10ee747>] do_kern_mount+0x3c/0xbb
  [<c10eede8>] do_mount+0x622/0x66f
  [<c10ed9ca>] ? copy_mount_options+0xe/0xe7
  [<c10b1c15>] ? memdup_user+0x34/0x4b
  [<c10b1c5d>] ? strndup_user+0x31/0x42
  [<c10eeea2>] sys_mount+0x6d/0x9b
  [<c1eba70c>] syscall_call+0x7/0xb
Code: 8c 01 00 00 b8 30 4e 79 c2 e8 41 a1 be 00 8d 8b f4 
01 00 00 8b 93 f4 01 00 00 8b 83 f8 01 00 00 89 42 04 89 
10 8b 86 54 02 00 00
  48 04 89 83 f4 01 00 00 8d 86 54 02 00 00 89 83 f8 01 00 
00
EIP: [<c12d01fb>] logfs_drop_inode+0x3c/0x68 SS:ESP 
0068:f5199e68
CR2: 0000000000000004
---[ end trace cd59ca17c20fba5d ]---
---
Professional hosting for everyone - http://www.host.ru

Fwd: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

I dunno if you guys saw this. Any ideas?

Dave Chinner and Al Viro on the recipients because they were working
on iput_final etc locking changes. And logfs people for obvious
reasons.

The Code: line is buggered and seems to be missing one instruction
byte, and I think it's because the user used a web interface, and the
"<>" around the byte messed things up. But the code arount it decodes
to:

   0:	b8 30 4e 79 c2       	mov    $0xc2794e30,%eax   (probably
logfs_inode_lock address)
   5:	e8 41 a1 be 00       	call   xxx (probably _raw_spin_lock)
   a:	8d 8b f4 01 00 00    	lea    0x1f4(%ebx),%ecx
(li->li_freeing_list address)
  10:	8b 93 f4 01 00 00    	mov    0x1f4(%ebx),%edx  (li->li_freeing_list.next)
  16:	8b 83 f8 01 00 00    	mov    0x1f8(%ebx),%eax  (li->li_freeing_list.prev)
  1c:	89 42 04             	mov    %eax,0x4(%edx)   (next->prev = prev)
  1f:	89 10                	mov    %edx,(%eax)         (prev->next = next)
  ... something messed up ..
  29:	89 83 f4 01 00 00    	mov    %eax,0x1f4(%ebx)
  2f:	8d 86 54 02 00 00    	lea    0x254(%esi),%eax
  35:	89 83 f8 01 00 00    	mov    %eax,0x1f8(%ebx)

and that's basically the code that does:

  list_move(&li->li_freeing_list, &super->s_freeing_list);

and the removal from the old list has succeeded, but adding to the
super->s_freeing_list is failing.

It looks like a NULL pointer dereference with offset 4, so at a guess,
super->s_freeing_list.next is NULL, and it's the "next->prev = entry"
instruction that faults when inserting into that list.

How/why would s_freeing_list be NULL? I have no idea. But it looks
like a failed mount, so presumably it was never initialized.

              Linus

---------- Forwarded message ----------
From: werner <w.landgraf@ru.ru>
Date: Fri, Apr 29, 2011 at 3:10 PM
Subject: 2.6.39-rc5-git2 boot crashs
To: linux-kernel@vger.kernel.org




Pid: 5635, comm: mount Tainted: G         C 2.6.39-rc5-git2 #1 System
manufacturer System Product Name/M2N8-VMX
EIP: 0060:[<c12d01fb>] EFLAGS: 00010246 CPU: 0
EIP is at logfs_drop_inode+0x3c/0x68
EAX: 00000000 EBX: f4db8000 ECX: f4db81f4 EDX: f4db81f4
ESI: f521c000 EDI: f5232c00 EBP: f5199e70 ESP: f5199e68
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process mount (pid: 5635, ti=f5198000 task=f523ae50 task.ti=f5198000)
Stack:
 c1f2344c f4db8000 f5199e84 c10ea544 ffffffea f5232c00 f68ac1c0 f5199ec0
 c12d77cd 00000000 00000000 c10ced5c 00000000 f521c000 00000400 f521c000
 f68a4b40 00000040 000000d0 00000000 f5106cb0 f5106cb0 f5199ef8 c10d9b11
Call Trace:
 [<c10ea544>] iput+0x5c/0x119
 [<c12d77cd>] logfs_mount+0x44f/0x5cc
 [<c10ced5c>] ? __kmalloc_track_caller+0x9b/0x157
 [<c10d9b11>] mount_fs+0x68/0x13e
 [<c10b1ce3>] ? kstrdup+0x30/0x41
 [<c10ee6c3>] vfs_kern_mount+0x53/0x7f
 [<c10ee747>] do_kern_mount+0x3c/0xbb
 [<c10eede8>] do_mount+0x622/0x66f
 [<c10ed9ca>] ? copy_mount_options+0xe/0xe7
 [<c10b1c15>] ? memdup_user+0x34/0x4b
 [<c10b1c5d>] ? strndup_user+0x31/0x42
 [<c10eeea2>] sys_mount+0x6d/0x9b
 [<c1eba70c>] syscall_call+0x7/0xb
Code: 8c 01 00 00 b8 30 4e 79 c2 e8 41 a1 be 00 8d 8b f4 01 00 00 8b
93 f4 01 00 00 8b 83 f8 01 00 00 89 42 04 89 10 8b 86 54 02 00 00
 48 04 89 83 f4 01 00 00 8d 86 54 02 00 00 89 83 f8 01 00 00
EIP: [<c12d01fb>] logfs_drop_inode+0x3c/0x68 SS:ESP 0068:f5199e68
CR2: 0000000000000004
---[ end trace cd59ca17c20fba5d ]---
---
Professional hosting for everyone - http://www.host.ru
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

On Fri, Apr 29, 2011 at 7:31 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> It looks like a NULL pointer dereference with offset 4, so at a guess,
> super->s_freeing_list.next is NULL, and it's the "next->prev = entry"
> instruction that faults when inserting into that list.
>
> How/why would s_freeing_list be NULL? I have no idea. But it looks
> like a failed mount, so presumably it was never initialized.

Hmm. super->s_freeing_list is initialized pretty late in
logfs_read_sb(), and any error path _before_ that point will result in
a "goto err1" in logfs_get_sb_device() which will do various iputs
etc. All without that list initialized. That would seem to be the
cause of this, possibly triggered by Al's changes to ->mount from
read_super.

Somebody who knows the code better than me (ie any reasonably
well-educated squirrel) should take another look, though.

Werner, if this is easily repeatable for you, could you test just
moving up the lines that initialize the superblock mutexes and the
s_freeing_list to the top of logfs_read_sb() rather than the end (ie
move the three lines that do

        mutex_init(&super->s_dirop_mutex);
        mutex_init(&super->s_object_alias_mutex);
        INIT_LIST_HEAD(&super->s_freeing_list);

to be before the call to mempool_create(). That way those things will
be initialized much earlier, which is definitely what we want.

Whether that's the only problem and actually fixes it, I won't even
begin to guess, though.

                    Linus

Re: 2.6.39-rc5-git2 boot crashs

[Al Viro]

On Fri, Apr 29, 2011 at 07:47:14PM -0700, Linus Torvalds wrote:
> On Fri, Apr 29, 2011 at 7:31 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
> >
> > It looks like a NULL pointer dereference with offset 4, so at a guess,
> > super->s_freeing_list.next is NULL, and it's the "next->prev = entry"
> > instruction that faults when inserting into that list.
> >
> > How/why would s_freeing_list be NULL? I have no idea. But it looks
> > like a failed mount, so presumably it was never initialized.
> 
> Hmm. super->s_freeing_list is initialized pretty late in
> logfs_read_sb(), and any error path _before_ that point will result in
> a "goto err1" in logfs_get_sb_device() which will do various iputs
> etc. All without that list initialized. That would seem to be the
> cause of this, possibly triggered by Al's changes to ->mount from
> read_super.

Then it ought to be reproducible with much ealier kernels.  Say, 2.6.37 or
so...  That part of ->mount() series went in during last Autumn...

Re: 2.6.39-rc5-git2 boot crashs

[Al Viro]

On Sat, Apr 30, 2011 at 03:55:45AM +0100, Al Viro wrote:

> > Hmm. super->s_freeing_list is initialized pretty late in
> > logfs_read_sb(), and any error path _before_ that point will result in
> > a "goto err1" in logfs_get_sb_device() which will do various iputs
> > etc. All without that list initialized. That would seem to be the
> > cause of this, possibly triggered by Al's changes to ->mount from
> > read_super.

Wait a bit; _can_ we get there with non-NULL ->s_master_inode et.al.?
iput(NULL) is a noop...  I don't think so, since logfs_init_journal()
is not called until after we initialize that list.

Not that I'd object against taking that initialization earlier, of course,
but there seems to be something else going on...  Which iput() it is?

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

On Fri, Apr 29, 2011 at 8:02 PM, Al Viro <viro@zeniv.linux.org.uk> wrote:
>
> Wait a bit; _can_ we get there with non-NULL ->s_master_inode et.al.?
> iput(NULL) is a noop...  I don't think so, since logfs_init_journal()
> is not called until after we initialize that list.
>
> Not that I'd object against taking that initialization earlier, of course,
> but there seems to be something else going on...  Which iput() it is?

Not something I can guess from the oops, sadly. Gcc has inlined
everything into logfs_mount, and the "0x44f/0x5cc" offset isn't very
helpful (with the same compiler version and config options it would be
possible to figure it out).

But looking at it, logfs_init_mapping() is currently called before
"s_freeing_list" is initialized, and it sets up at least
s_mapping_inode. So if anything fails between that point and the point
where we initialize s_freeing_list, I think we're toast.

I didn't check the other inodes, but at least that one does seem to be
potentially non-NULL. No?

                 Linus

Re: 2.6.39-rc5-git2 boot crashs

[Al Viro]

On Fri, Apr 29, 2011 at 08:09:16PM -0700, Linus Torvalds wrote:
> On Fri, Apr 29, 2011 at 8:02 PM, Al Viro <viro@zeniv.linux.org.uk> wrote:
> >
> > Wait a bit; _can_ we get there with non-NULL ->s_master_inode et.al.?
> > iput(NULL) is a noop... ?I don't think so, since logfs_init_journal()
> > is not called until after we initialize that list.
> >
> > Not that I'd object against taking that initialization earlier, of course,
> > but there seems to be something else going on... ?Which iput() it is?
> 
> Not something I can guess from the oops, sadly. Gcc has inlined
> everything into logfs_mount, and the "0x44f/0x5cc" offset isn't very
> helpful (with the same compiler version and config options it would be
> possible to figure it out).
> 
> But looking at it, logfs_init_mapping() is currently called before
> "s_freeing_list" is initialized, and it sets up at least
> s_mapping_inode. So if anything fails between that point and the point
> where we initialize s_freeing_list, I think we're toast.
> 
> I didn't check the other inodes, but at least that one does seem to be
> potentially non-NULL. No?

Ho-hum...  Point.  Let's take that initialization up to the beginning of
logfs_read_sb(), see if oops goes away and then try to figure out WTF
we hadn't been seeing it all along.  I don't see anything recent affecting
that area, but then logfs goes through many odd places during mount (including,
IIRC, mtd).  So there might be many sources of the failure where we used to
have none and failure in that spot would, indeed, fuck the things up that
way...

In any case, taking that initialization to the beginning of logfs_read_sb()
(if not up to its only caller where we set ->s_op et.al. anyway) seems to be
the obviously right thing to do.  Unless logfs folks have some subtle
objections?

Re: 2.6.39-rc5-git2 boot crashs

[werner]

At my reclamation thread about 2.6.39-rc3,4 crashs, I 
informed that there was a reset-resistent change of the 
system after crashs, so that on subsequent boots (after a 
'primary' crash rather at the end of booting) it happened 
an early 'secondary'  crash at the time of initializing 
ata0, with funny effects like that the grafic card (or 
anything else) was identified as an ata device, with 
subsequent 'read erros' on it and crash. This 'secondary' 
effect repeated and repeated and gone away only at booting 
with a normal kernel (2.6.38.4 or 2.6.26.2). But if 
afterwards booting again with 2.6.39-rc3 or -rc4 , then at 
the end of the boot it crashed, and at subsequent boots 
again continued this reset-resistent effect that it crasha 
again and again with ata0 problems, until I reboot with 
2.6.38.4 or 2.6.26.2 , or waiting 5 minutes (perhaps until 
the memory discharged).

All these problems dont happen with 2.6.38.4 or 2.6.26.2

Werner Landgraf


================================================
On Fri, 29 Apr 2011 20:09:16 -0700
  Linus Torvalds <torvalds@linux-foundation.org> wrote:
> On Fri, Apr 29, 2011 at 8:02 PM, Al Viro 
><viro@zeniv.linux.org.uk> wrote:
>>
>> Wait a bit; _can_ we get there with non-NULL 
>>->s_master_inode et.al.?
>> iput(NULL) is a noop...  I don't think so, since 
>>logfs_init_journal()
>> is not called until after we initialize that list.
>>
>> Not that I'd object against taking that initialization 
>>earlier, of course,
>> but there seems to be something else going on...  Which 
>>iput() it is?
> 
> Not something I can guess from the oops, sadly. Gcc has 
>inlined
> everything into logfs_mount, and the "0x44f/0x5cc" 
>offset isn't very
> helpful (with the same compiler version and config 
>options it would be
> possible to figure it out).
> 
> But looking at it, logfs_init_mapping() is currently 
>called before
> "s_freeing_list" is initialized, and it sets up at least
> s_mapping_inode. So if anything fails between that point 
>and the point
> where we initialize s_freeing_list, I think we're toast.
> 
> I didn't check the other inodes, but at least that one 
>does seem to be
> potentially non-NULL. No?
> 
>                 Linus
> 
> 

"werner" <w.landgraf@ru.ru>
---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

On Fri, Apr 29, 2011 at 8:39 PM, werner <w.landgraf@ru.ru> wrote:
>
> At my reclamation thread about 2.6.39-rc3,4 crashs, I informed that there
> was a reset-resistent change of the system after crashs, so that on
> subsequent boots (after a 'primary' crash rather at the end of booting) it
> happened an early 'secondary'  crash at the time of initializing ata0, with
> funny effects like that the grafic card (or anything else) was identified as
> an ata device, with subsequent 'read erros' on it and crash. This
> 'secondary' effect repeated and repeated and gone away only at booting with
> a normal kernel (2.6.38.4 or 2.6.26.2). But if afterwards booting again with
> 2.6.39-rc3 or -rc4 , then at the end of the boot it crashed, and at
> subsequent boots again continued this reset-resistent effect that it crasha
> again and again with ata0 problems, until I reboot with 2.6.38.4 or 2.6.26.2
> , or waiting 5 minutes (perhaps until the memory discharged).
>
> All these problems dont happen with 2.6.38.4 or 2.6.26.2

Do you think you could bisect when that odd after-reset behavior started?

It does sound like you have some PCI-level problem (some device that
has "sticky" state and doesn't get reset properly). Most likely a
hardware "feature" (there is various PCI hardware that allows things
like device identifiers to be written to), coupled with a firmware bug
that doesn't reset things.

But it would be intriguing to hear when it started happening, so that
we can figure out exactly _what_ isn't getting properly reset..

The logfs oops may just be a result of "autodetect any random
filesystem" in that confused state. So when the state isn't confused,
you'd not see the oops, because nothing ever tries to mount the
invalid logfs image.

                 Linus

Re: 2.6.39-rc5-git2 boot crashs

[werner]

[-- Attachment #1: Type: text/plain, Size: 1940 bytes --]

Enclosed the config and compilation log file (with some 
warnings, things which should be corrected also). Perhaps 
it's useful for find the error.

Right now my computer crashed again when I unzipped a big 
file.  As said in the 2.6.39-rc1 until -rc4 reclamations, 
 the computer always crashs if zip, unzip or move big 
files.  This looks like an error of the memory / paging 
driver.

w.r.t. my last message, it should be ata1 rather than ata0 
.  ( See, enclosed a foto of such reboot-resistent 
secondary crashs (happened after a big primary crash) on 
which 'anything' was interpreted as ata )

wl

=====================================================
On Fri, 29 Apr 2011 20:09:16 -0700
  Linus Torvalds <torvalds@linux-foundation.org> wrote:
> On Fri, Apr 29, 2011 at 8:02 PM, Al Viro 
><viro@zeniv.linux.org.uk> wrote:
>>
>> Wait a bit; _can_ we get there with non-NULL 
>>->s_master_inode et.al.?
>> iput(NULL) is a noop...  I don't think so, since 
>>logfs_init_journal()
>> is not called until after we initialize that list.
>>
>> Not that I'd object against taking that initialization 
>>earlier, of course,
>> but there seems to be something else going on...  Which 
>>iput() it is?
> 
> Not something I can guess from the oops, sadly. Gcc has 
>inlined
> everything into logfs_mount, and the "0x44f/0x5cc" 
>offset isn't very
> helpful (with the same compiler version and config 
>options it would be
> possible to figure it out).
> 
> But looking at it, logfs_init_mapping() is currently 
>called before
> "s_freeing_list" is initialized, and it sets up at least
> s_mapping_inode. So if anything fails between that point 
>and the point
> where we initialize s_freeing_list, I think we're toast.
> 
> I didn't check the other inodes, but at least that one 
>does seem to be
> potentially non-NULL. No?
> 
>                 Linus
> 
> 

"werner" <w.landgraf@ru.ru>
---
Professional hosting for everyone - http://www.host.ru

[-- Attachment #2: config-2.6.39-rc5-git2-i486-1sys.bz2 --]
[-- Type: application/octet-stream, Size: 32531 bytes --]

[-- Attachment #3: linux-2.6.39-rc5-git2-i486-1sys.log.bz2 --]
[-- Type: application/octet-stream, Size: 74936 bytes --]

[-- Attachment #4: Foto0049.jpg --]
[-- Type: image/jpeg, Size: 184750 bytes --]

Re: 2.6.39-rc5-git2 boot crashs

[werner]

The problem that the computer crashs if zip, unzip or move 
a big file, started with -rc1

The problem with the secondary reset-resistent crashs 
after a primary and-of-boot or after-boot crash started 
with -rc3 or -rc4, at least I perceived it then, but it's 
possible that it occured also before, at least then I 
didn't note it

Now I see, that nor the syslog don't contain everything 
(this was also better with 2.6.38.4).  For example, 
currently aren't logged these crashs which currently 
occure during rtc0 initializing (in addition to the other 
crashs protocolled in the log files). Also, as you can see 
from my before-last message, with the screen foto of 
/dev/pts/0 w.r.t. boot_vga, this also don't appear in the 
log file which was added at the end of the same message.

For being -rc5 , that kernel is rather bad.  I hope you 
get through to correct it until -rc10

W.Landgraf

  



=========================================================
On Fri, 29 Apr 2011 21:00:24 -0700
  Linus Torvalds <torvalds@linux-foundation.org> wrote:
> On Fri, Apr 29, 2011 at 8:39 PM, werner 
><w.landgraf@ru.ru> wrote:
>>
>> At my reclamation thread about 2.6.39-rc3,4 crashs, I 
>>informed that there
>> was a reset-resistent change of the system after crashs, 
>>so that on
>> subsequent boots (after a 'primary' crash rather at the 
>>end of booting) it
>> happened an early 'secondary'  crash at the time of 
>>initializing ata0, with
>> funny effects like that the grafic card (or anything 
>>else) was identified as
>> an ata device, with subsequent 'read erros' on it and 
>>crash. This
>> 'secondary' effect repeated and repeated and gone away 
>>only at booting with
>> a normal kernel (2.6.38.4 or 2.6.26.2). But if 
>>afterwards booting again with
>> 2.6.39-rc3 or -rc4 , then at the end of the boot it 
>>crashed, and at
>> subsequent boots again continued this reset-resistent 
>>effect that it crasha
>> again and again with ata0 problems, until I reboot with 
>>2.6.38.4 or 2.6.26.2
>> , or waiting 5 minutes (perhaps until the memory 
>>discharged).
>>
>> All these problems dont happen with 2.6.38.4 or 2.6.26.2
> 
> Do you think you could bisect when that odd after-reset 
>behavior started?
> 
> It does sound like you have some PCI-level problem (some 
>device that
> has "sticky" state and doesn't get reset properly). Most 
>likely a
> hardware "feature" (there is various PCI hardware that 
>allows things
> like device identifiers to be written to), coupled with 
>a firmware bug
> that doesn't reset things.
> 
> But it would be intriguing to hear when it started 
>happening, so that
> we can figure out exactly _what_ isn't getting properly 
>reset..
> 
> The logfs oops may just be a result of "autodetect any 
>random
> filesystem" in that confused state. So when the state 
>isn't confused,
> you'd not see the oops, because nothing ever tries to 
>mount the
> invalid logfs image.
> 
>                 Linus
> 
> 

"werner" <w.landgraf@ru.ru>
---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

2011/4/29 werner <w.landgraf@ru.ru>:
> The problem that the computer crashs if zip, unzip or move a big file,
> started with -rc1

Please do try to bisect..

> For being -rc5 , that kernel is rather bad.  I hope you get through to
> correct it until -rc10

Quite frankly, right now I think you're the only one that has reported
these kinds of problems, so we will need to rely on you to figure out
what is so odd about your setup.

If you can pinpoint when the crashes happened, that would help a lot.

Also, the crash that happens not-at-boot is in many ways way more
important. Clearly you have something odd going on after a reboot, and
I'd love to figure that out too, but in many ways the unzip one is way
more important.

Sadly, your previous mail had a nice picture, but the important
information had scrolled off the screen because of the ata1 exception
and command failed printouts. Any chance you could get a picture of
just the oops? If worst comes to worst, you might even have to disable
those ata debug printouts (normally they are really important, but if
they make the earlier oops scroll off the screen, they hurt more than
they help).

Oh, and please do an lspci -vvxx and a working dmesg too for that machine.

                  Linus

Re: 2.6.39-rc5-git2 boot crashs

[werner]

For your information:
/ All these problems dont have with 2.6.38 , .1, .2, .3 , 
.4
/ At 2.6.38-rc1 or was it 37-rc1 there had a problem with 
khugepaged what I also reclaimed.  That was similar like 
now these crashs which are NOT visible in syslog, 
happening a few minutes until hours after booting (these 
crashs should be visible in syslog 10..30 seconds before I 
rebooting).   At that time, the problem was corrected with 
khugepaged.   But it's possible, that the correction at 
that time wasn't good enough, so that now, after some 
other changes, the same problem 'returned'.  Currently, 
since 2.6.39-rc1 it crashs ALWAYS if I zip or unzip files 
of some 100 M  or move big files.     It's possible that 
it is a problem with the memory administration.
/ I use gcc 4.3.3 and glibc 2.9
I hope this informations are useful for correct these 
problems.
wl

===================================================================
On Sat, 30 Apr 2011 03:55:45 +0100
  Al Viro <viro@ZenIV.linux.org.uk> wrote:
> On Fri, Apr 29, 2011 at 07:47:14PM -0700, Linus Torvalds 
>wrote:
>> On Fri, Apr 29, 2011 at 7:31 PM, Linus Torvalds
>> <torvalds@linux-foundation.org> wrote:
>> >
>> > It looks like a NULL pointer dereference with offset 
>>4, so at a guess,
>> > super->s_freeing_list.next is NULL, and it's the 
>>"next->prev = entry"
>> > instruction that faults when inserting into that list.
>> >
>> > How/why would s_freeing_list be NULL? I have no idea. 
>>But it looks
>> > like a failed mount, so presumably it was never 
>>initialized.
>> 
>> Hmm. super->s_freeing_list is initialized pretty late in
>> logfs_read_sb(), and any error path _before_ that point 
>>will result in
>> a "goto err1" in logfs_get_sb_device() which will do 
>>various iputs
>> etc. All without that list initialized. That would seem 
>>to be the
>> cause of this, possibly triggered by Al's changes to 
>>->mount from
>> read_super.
> 
> Then it ought to be reproducible with much ealier 
>kernels.  Say, 2.6.37 or
> so...  That part of ->mount() series went in during last 
>Autumn...
> 
> 

"werner" <w.landgraf@ru.ru>
---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[werner]

[-- Attachment #1: Type: text/plain, Size: 1185 bytes --]

Pls see enclosed:

/ lspci   -vvxx
/ dmesg

with 2.6.39-rc5-git2.


One minute later, it crashed again.   The screen foto, 
I'll send in a next e-mail in a few seconds, because here 
I can add only 3 files.    After, I rebooted with 2.6.38.4 
, what's stable and never crashed.   For comparison,

/ dmesg

with 2.6.38.4 (from just now) is added also.

I dont know if in the syslog is recorded what happened 
before the ata1 crash, I'll search it.


wl

=========================================================================
On Fri, 29 Apr 2011 21:46:18 -0700
  Linus Torvalds <torvalds@linux-foundation.org> wrote:
> 2011/4/29 werner <w.landgraf@ru.ru>:
>> Not only now, long time (since approx. -rc1) I'm 
>>reclaiming that the
>> computer crashs if zipping / unzipping big files
> 
> I understood.
> 
>> The foto on my last mail is complete; after the ata1 
>>error messages isn't
>> nothing else but the computer crashed.
> 
> It's the part that happenen *before* that is 
>interesting. The stuff
> that scrolled off _because_ of the ata1 error messages.
> 
>                    Linus
> 
> 

"werner" <w.landgraf@ru.ru>
---
Professional hosting for everyone - http://www.host.ru

[-- Attachment #2: lspci.bz2 --]
[-- Type: application/octet-stream, Size: 3833 bytes --]

[-- Attachment #3: dmesg.bz2 --]
[-- Type: application/octet-stream, Size: 19684 bytes --]

[-- Attachment #4: dmesg.2.6.38.4.bz2 --]
[-- Type: application/octet-stream, Size: 18314 bytes --]

Re: 2.6.39-rc5-git2 boot crashs

[werner]

[-- Attachment #1: Type: text/plain, Size: 1434 bytes --]

Enclosed a part of the syslog of the time when I made the 
screen
foto with the ata1 problem. Unfortunately, neither the 
watch of my computer, nor
of my handy is exact and also the system time of the foto 
may be when I copied it
to the computer, so that I don't know exactly to which of 
the boots the foto was
refered -- but it's also quite possible that this ata1 
crashs are neither logged
in syslog, like actually some crashs at rtc0 aren't 
logged.  MORE UNFORTUNATELY,
THE LOG FILE NOR SHOWS THE KERNEL VERSION AT BOOT TIME 
(YOU SHOULD IMPROVE THIS !!!),
  SO THAT THE BOOTS ARE REFERED SOMETIMES TO 2.4.38.3 or 
.4, SOMETIMES TO 2.6.39-RC3
or RC4 . However, I hope the log file is useful for 
something.
wl



=======================================================
On Fri, 29 Apr 2011 21:46:18 -0700
  Linus Torvalds <torvalds@linux-foundation.org> wrote:
> 2011/4/29 werner <w.landgraf@ru.ru>:
>> Not only now, long time (since approx. -rc1) I'm 
>>reclaiming that the
>> computer crashs if zipping / unzipping big files
> 
> I understood.
> 
>> The foto on my last mail is complete; after the ata1 
>>error messages isn't
>> nothing else but the computer crashed.
> 
> It's the part that happenen *before* that is 
>interesting. The stuff
> that scrolled off _because_ of the ata1 error messages.
> 
>                    Linus
> 
> 

"werner" <w.landgraf@ru.ru>
---
Professional hosting for everyone - http://www.host.ru

[-- Attachment #2: syslog.txt.bz2 --]
[-- Type: application/octet-stream, Size: 11994 bytes --]

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

2011/4/29 werner <w.landgraf@ru.ru>:
> Pls see enclosed:
>
> / lspci   -vvxx
> / dmesg

Ok.

So what strikes me is that it looks like you're basically booting a
"allyesconfig" kernel, or at least something that has a _ton_ of crazy
drivers and filesystems that are entirely irrelevant for your setup.

And I'm wondering whether your problems are due to some buggy driver
that stomps on something that it shouldn't. It's clearly a regression
(your 2.6.38.4 dmesg shows the same "lots of irrelevant drivers and
filesystems" issue, but works for you), but it may explain why others
aren't seeing the problem. Your 2.6.39-rc5 dmesg does have a few new
drivers in it, and that seems to be because they simply didn't exist
back in 2.6.38 (but I didn't check).

So your lspci shows a AMD system with a nvidia chipset:

  00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
  00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
  00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
  00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
  00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev
a2) (prog-if 10 [OHCI])
  00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev
a2) (prog-if 20 [EHCI])
  00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
(prog-if 01 [Subtractive decode])
  00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
  00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
(prog-if 8a [Master SecP PriP])
  00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev
a2) (prog-if 85 [Master SecO PriO])
  00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev
a2) (prog-if 00 [Normal decode])
  00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev
a2) (prog-if 00 [Normal decode])
  00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev
a2) (prog-if 00 [Normal decode])
  00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100
nForce 405 (rev a2) (prog-if 00 [VGA])
  00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
  00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
  00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
  00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
  01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
  04:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit
Ethernet Adapter (rev b0)

and in particular, your IDE/SATA controllers are clearly nVidia. But
the generic IDE driver seems to be a bit confused:

  Uniform Multi-Platform E-IDE driver
  amd74xx 0000:00:06.0: UDMA133 controller
  amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
  amd74xx 0000:00:06.0: IDE port disabled
  amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
      ide0: BM-DMA at 0xffa0-0xffa7
  Probing IDE interface ide0...
  ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  ide_generic: please use "probe_mask=0x3f" module parameter for
probing all legacy ISA IDE ports

but that shouldn't matter, since it doesn't actually find anything there.

But could you try using a more reasonable config, and see if the
problem goes away? Don't configure logfs (you don't use it), don't
configure all the crazy random SCSI drivers, don't configure all the
laptop drivers etc (that cause various management drivers to be loaded
even though you don't even have the hardware afaik):

 ...
  XGIfb: Options (null)
  asus_wmi: Asus Management GUID not found
  asus_wmi: Management GUID not found
  asus_wmi: Management GUID not found
  msi_laptop: driver 0.5 successfully loaded.
  compal-laptop: Motherboard not recognized (You could try the
module's force-parameter)
  dell-wmi: No known WMI GUID found
  dell_wmi_aio: No known WMI GUID found
  acer_wmi: Acer Laptop ACPI-WMI Extras
  acer_wmi: No or unsupported WMI interface, unable to load
  acerhdf: Acer Aspire One Fan driver, v.0.5.24
  acerhdf: unknown (unsupported) BIOS version System
manufacturer/System Product Name/0413   , please report, aborting!
  hp_accel: driver loaded
  hdaps: supported laptop not found!
  hdaps: driver init failed (ret=-19)!
  fujitsu-laptop: driver 0.6.0 successfully loaded.
  This machine doesn't have MSI-hotkeys through WMI
  Topstar Laptop ACPI extras driver loaded
 ...

because if any of them corrupt memory or something like that, we
obviously want to find that bug, but we don't want to think it's some
bug in the drivers you actually _use_.

So if you could try a minimal config that supports only the hardware
(and filesystems) you actually _have_ and use (ie just disable IDE
entirely - you don't want it, you want the SATA_nv driver), that would
be great. Does that work better for you?

And if it does work better, then it would be really interesting to
start enabling things again, and see what causes the problem.

Ok?

                                    Linus

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

2011/4/30 werner <w.landgraf@ru.ru>:
>
> The reason that I enable everything is, that the kernel packages
> are build for a distro.   There have to be everything enabled,
> because you never know what computer the users have.

I DO NOT CARE WHY YOU ENABLE EVERYTHING.

I want to know what makes it start to fail. We simply don't know why
you see this problem (and apparently your friend too), but one issue
may be a totally unrelated buggy driver.

In order to figure it out, you need to help us. And one thing that is
very odd and wrong about your setup is how you have compiled in
absolutely everything.

And yes, it's wrong, because the way to do distro kernels is to
compile in the sane and common stuff, and load the rest as modules as
required.

And that's exactly because

 (a) some drivers cannot sanely auto-detect if they are needed
(sometimes they are just buggy, but often it's because the hardware
they drive is not sane and doesn't necessarily have any nice
enumeration model)

 (b) bugs happen. They happen especially commonly with rare hardware,
since that by definition gets less testing (that rare hardware can
often be "high-end" hardware - you'd think they are higher quality,
but the reverse is usually true).

Probing absolutely everything at boot-time tends to just be more
dangerous. There's a reason why most distros ask something like "are
you using just standard devices, or specialized storage subsystems",
so that they don't need to worry about the rare and possibly buggy
cases quite as much.

Some drivers you enable tend to be more about embedded systems (ie the
whole MTD layer etc), and there's likely little reason to do that in a
standard distribution kernel at all.

> I'm doing essentially the same since almost 4 years. Sometimes
> it gives problems during -rc1 to -rc4 or so, but at the end always
> everything works.

It's clearly a regression. Nobody disputes that. But you need to help
us find it. So just do a minimal kernel. Please. So that we can say
either "yes, it still shows up even when you only have the normal
drivers", or we can say "ok, it's one of the uncommon drivers that
screws things up".

And it's not just drivers. Please disable things like virtualization
etc kernel features if you don't need it.

We cannot fix it if we cannot pinpoint what the problem is. We won't
ignore it if the problem goes away when you have disabled drivers - at
that point I'm going to ask you to try to enable the drivers and
features until it starts happening again, so that we know _what_
random thing is causing it.

And please stop arguing against people who are trying to help figure
out what is wrong, ok?

> AND: the crashs with the same kernel don't happen only at my computer,
> but also on a laptop of at least one friend, on the same laptop also
> 2.6.38.4 runs normally.

With your "everything enabled" kernel, right?

If you don't want to minimize the configuration, you'll need to at
least bisect _exactly_ where the problem starts. There's about ten
thousand commits, spanning the whole kernel, in between 38 and 39-rc1.
We don't know what's wrong right now. And you are currently the only
one seeing, along with your friend who presumably uses your kernel. So
there's something wrong that is triggered by something specific to
YOUR setup.

See what I'm trying to say here?

                      Linus

Re: 2.6.39-rc5-git2 boot crashs

[werner]

Since years it's all the time that I compile the kernel 
with everything enabled, because these kernel builds are 
for a distro, and should work on any computer.  Normally, 
things going stable at -rc3 or -rc4 , often already at 
-rc2.

Beside of with my computer, essentially the same problems 
also happens with a laptop of a friend.

Also, a big problem are the (after-boot-) crashs if 
zipping / unzipping big files.  Packages I can build only 
with 2.6.38.4, not with 2.6.39-rcX

Below is the diff between the config of 2.6.38.4 and 2.6 
39-rc5-git3 .  You could inspect them what potentially 
could explain the reported problems.  But I think at least 
the problems which happens on my computer, and on that of 
the friend, are regressions, because none of the new 
staging drivers we use.

wl

===============
3,4c3,4
< # Linux/i386 2.6.38.4 Kernel Configuration
< # Thu Apr 21 22:06:47 2011
---
> # Linux/i386 2.6.39-rc5-git2 Kernel Configuration
> # Fri Apr 29 15:48:26 2011
22c22
< # CONFIG_NEED_DMA_MAP_STATE is not set
---
> CONFIG_NEED_DMA_MAP_STATE=y
48a49
> CONFIG_HAVE_INTEL_TXT=y
51d51
< CONFIG_X86_TRAMPOLINE=y
64d63
< CONFIG_LOCK_KERNEL=y
85a85
> # CONFIG_FHANDLE is not set
97d96
< # CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
99a99
> CONFIG_GENERIC_IRQ_SHOW=y
101,103c101
< # CONFIG_AUTO_IRQ_AFFINITY is not set
< # CONFIG_IRQ_PER_CPU is not set
< # CONFIG_HARDIRQS_SW_RESEND is not set
---
> CONFIG_IRQ_FORCED_THREADING=y
119c117,129
< # CONFIG_CGROUPS is not set
---
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> # CONFIG_CGROUP_NS is not set
> # CONFIG_CGROUP_FREEZER is not set
> # CONFIG_CGROUP_DEVICE is not set
> # CONFIG_CPUSETS is not set
> # CONFIG_CGROUP_CPUACCT is not set
> # CONFIG_RESOURCE_COUNTERS is not set
> # CONFIG_CGROUP_PERF is not set
> CONFIG_CGROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> # CONFIG_RT_GROUP_SCHED is not set
> # CONFIG_BLK_CGROUP is not set
126c136
< # CONFIG_SCHED_AUTOGROUP is not set
---
> CONFIG_SCHED_AUTOGROUP=y
140d149
< CONFIG_EMBEDDED=y
157a167
> CONFIG_EMBEDDED=y
275c285
< CONFIG_X86_32_IRIS=m
---
> CONFIG_X86_32_IRIS=y
287d296
< CONFIG_X86_CPU=y
311c320
< # CONFIG_IOMMU_API is not set
---
> CONFIG_IOMMU_API=y
411,414d419
< CONFIG_PM=y
< # CONFIG_PM_DEBUG is not set
< CONFIG_PM_SLEEP_SMP=y
< CONFIG_PM_SLEEP=y
416a422
> CONFIG_HIBERNATE_CALLBACKS=y
418a425,426
> CONFIG_PM_SLEEP=y
> CONFIG_PM_SLEEP_SMP=y
420c428,429
< CONFIG_PM_OPS=y
---
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
448a458
> # CONFIG_ACPI_APEI_PCIEAER is not set
508c518
< # CONFIG_INTEL_IDLE is not set
---
> CONFIG_INTEL_IDLE=y
524a535,537
> CONFIG_DMAR=y
> CONFIG_DMAR_DEFAULT_ON=y
> CONFIG_DMAR_FLOPPY_WA=y
534c547
< # CONFIG_PCI_MSI is not set
---
> CONFIG_PCI_MSI=y
538a552
> CONFIG_PCI_LABEL=y
553,554d566
< CONFIG_OLPC_OPENFIRMWARE=y
< CONFIG_OLPC_OPENFIRMWARE_DT=y
586a599,607
> CONFIG_RAPIDIO=y
> CONFIG_RAPIDIO_DISC_TIMEOUT=30
> CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
> CONFIG_RAPIDIO_TSI57X=y
> CONFIG_RAPIDIO_CPS_XX=y
> CONFIG_RAPIDIO_TSI568=y
> CONFIG_RAPIDIO_CPS_GEN2=y
> CONFIG_RAPIDIO_TSI500=y
> CONFIG_RAPIDIO_DEBUG=y
616,618c637
< CONFIG_ASK_IP_FIB_HASH=y
< # CONFIG_IP_FIB_TRIE is not set
< CONFIG_IP_FIB_HASH=y
---
> CONFIG_IP_FIB_TRIE_STATS=y
621a641
> CONFIG_IP_ROUTE_CLASSID=y
626c646
< CONFIG_NET_IPIP=m
---
> CONFIG_NET_IPIP=y
640c660
< CONFIG_INET_TUNNEL=m
---
> CONFIG_INET_TUNNEL=y
645,646c665,666
< CONFIG_INET_DIAG=m
< CONFIG_INET_TCP_DIAG=m
---
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
664c684
< CONFIG_IPV6=m
---
> CONFIG_IPV6=y
705a726
> # CONFIG_NF_CONNTRACK_TIMESTAMP is not set
713a735
> CONFIG_NF_CONNTRACK_BROADCAST=m
714a737
> CONFIG_NF_CONNTRACK_SNMP=m
727a751
> # CONFIG_NETFILTER_XT_SET is not set
731a756
> CONFIG_NETFILTER_XT_TARGET_AUDIT=m
753a779
> CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
761a788
> CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
790a818,829
> CONFIG_IP_SET=m
> CONFIG_IP_SET_MAX=256
> CONFIG_IP_SET_BITMAP_IP=m
> CONFIG_IP_SET_BITMAP_IPMAC=m
> CONFIG_IP_SET_BITMAP_PORT=m
> CONFIG_IP_SET_HASH_IP=m
> CONFIG_IP_SET_HASH_IPPORT=m
> CONFIG_IP_SET_HASH_IPPORTIP=m
> CONFIG_IP_SET_HASH_IPPORTNET=m
> CONFIG_IP_SET_HASH_NET=m
> CONFIG_IP_SET_HASH_NETPORT=m
> CONFIG_IP_SET_LIST_SET=m
835d873
< # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
929c967
< CONFIG_IP_SCTP=m
---
> CONFIG_IP_SCTP=y
941d978
< CONFIG_TIPC_NODES=255
945,946c982,983
< CONFIG_ATM=m
< CONFIG_ATM_CLIP=m
---
> CONFIG_ATM=y
> CONFIG_ATM_CLIP=y
948,949c985,986
< CONFIG_ATM_LANE=m
< CONFIG_ATM_MPOA=m
---
> CONFIG_ATM_LANE=y
> CONFIG_ATM_MPOA=y
992c1029
< CONFIG_WAN_ROUTER=m
---
> CONFIG_WAN_ROUTER=y
994d1030
< # CONFIG_PHONET_PIPECTRLR is not set
1007a1044
> # CONFIG_NET_SCH_SFB is not set
1014a1052,1053
> # CONFIG_NET_SCH_MQPRIO is not set
> # CONFIG_NET_SCH_CHOKE is not set
1024d1062
< CONFIG_NET_CLS_ROUTE=y
1031a1070
> # CONFIG_NET_CLS_CGROUP is not set
1050a1090
> CONFIG_RFS_ACCEL=y
1102a1143,1144
> CONFIG_CAN_C_CAN=m
> CONFIG_CAN_C_CAN_PLATFORM=m
1170,1171c1212,1213
< CONFIG_BT_L2CAP=m
< CONFIG_BT_SCO=m
---
> CONFIG_BT_L2CAP=y
> CONFIG_BT_SCO=y
1200a1243
> CONFIG_BT_WILINK=m
1239c1282
< CONFIG_RFKILL=m
---
> CONFIG_RFKILL=y
1267a1311
> CONFIG_ARCH_NO_SYSDEV_OPS=y
1273d1316
< # CONFIG_MTD_CONCAT is not set
1296c1339
< CONFIG_SM_FTL=m
---
> CONFIG_SM_FTL=y
1297a1341
> CONFIG_MTD_SWAP=y
1338a1383
> CONFIG_MTD_SC520CDP=y
1355a1401
> CONFIG_MTD_LATCH_ADDR=y
1392a1439,1440
> CONFIG_MTD_NAND_BCH=y
> CONFIG_MTD_NAND_ECC_BCH=y
1425,1428d1472
< 
< #
< # UBI debugging options
< #
1444a1489
> CONFIG_OF_PCI=y
1521c1566
< # CONFIG_BLK_DEV_HD is not set
---
> CONFIG_BLK_DEV_HD=y
1522a1568
> CONFIG_SENSORS_LIS3LV02D=y
1540c1586
< CONFIG_ISL29020=m
---
> CONFIG_ISL29020=y
1572a1619
> CONFIG_SENSORS_LIS3_I2C=m
1698d1744
< CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
1705c1751
< CONFIG_SCSI_CXGB4_ISCSI=m
---
> CONFIG_SCSI_CXGB4_ISCSI=y
1706a1753
> CONFIG_SCSI_BNX2X_FCOE=y
1709c1756
< CONFIG_SCSI_HPSA=m
---
> CONFIG_SCSI_HPSA=y
1711c1758
< CONFIG_SCSI_3W_SAS=m
---
> CONFIG_SCSI_3W_SAS=y
1751c1798
< CONFIG_VMWARE_PVSCSI=m
---
> CONFIG_VMWARE_PVSCSI=y
1813c1860
< CONFIG_SCSI_PM8001=m
---
> CONFIG_SCSI_PM8001=y
1873a1921
> CONFIG_PATA_ARASAN_CF=y
1956c2004,2010
< # CONFIG_TARGET_CORE is not set
---
> CONFIG_DM_FLAKEY=y
> CONFIG_TARGET_CORE=m
> CONFIG_TCM_IBLOCK=m
> CONFIG_TCM_FILEIO=m
> CONFIG_TCM_PSCSI=m
> CONFIG_LOOPBACK_TARGET=m
> # CONFIG_LOOPBACK_TARGET_CDB_DEBUG is not set
2155d2208
< # CONFIG_R8169_VLAN is not set
2178d2230
< CONFIG_CHELSIO_T3_DEPENDS=y
2180,2182c2232
< CONFIG_CHELSIO_T4_DEPENDS=y
< CONFIG_CHELSIO_T4=m
< CONFIG_CHELSIO_T4VF_DEPENDS=y
---
> CONFIG_CHELSIO_T4=y
2187a2238
> CONFIG_IXGBEVF=m
2243a2295
> # CONFIG_ATH5K_TRACER is not set
2294c2346,2362
< # CONFIG_IWLWIFI is not set
---
> CONFIG_IWLAGN=m
> 
> #
> # Debugging Options
> #
> # CONFIG_IWLWIFI_DEBUG is not set
> CONFIG_IWLWIFI_DEVICE_TRACING=y
> CONFIG_IWL_P2P=y
> CONFIG_IWLWIFI_LEGACY=m
> 
> #
> # Debugging Options
> #
> # CONFIG_IWLWIFI_LEGACY_DEBUG is not set
> # CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
> CONFIG_IWL4965=m
> CONFIG_IWL3945=m
2327a2396
> CONFIG_RT2800PCI_RT53XX=y
2343a2413
> CONFIG_RTL8192CU=m
2344a2415
> CONFIG_RTL8192C_COMMON=m
2400a2472
> CONFIG_USB_VL600=m
2444c2516
< CONFIG_ATM_DUMMY=m
---
> # CONFIG_ATM_DUMMY is not set
2481a2554,2556
> CONFIG_RIONET=m
> CONFIG_RIONET_TX_SIZE=128
> CONFIG_RIONET_RX_SIZE=128
2489c2564
< CONFIG_PLIP=m
---
> CONFIG_PLIP=y
2500c2575
< CONFIG_PPPOATM=m
---
> CONFIG_PPPOATM=y
2511c2586
< # CONFIG_NETPOLL_TRAP is not set
---
> CONFIG_NETPOLL_TRAP=y
2693a2769
> CONFIG_KEYBOARD_QT1070=y
2776a2853
> CONFIG_TOUCHSCREEN_ATMEL_MXT=y
2793d2869
< # CONFIG_TOUCHSCREEN_QT602240 is not set
2796a2873
> CONFIG_TOUCHSCREEN_WM831X=y
2819a2897
> CONFIG_TOUCHSCREEN_TSC2005=y
2883c2961,2964
< CONFIG_DEVKMEM=y
---
> CONFIG_UNIX98_PTYS=y
> CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
2885d2965
< CONFIG_COMPUTONE=m
2889d2968
< CONFIG_DIGIEPCA=m
2892d2970
< CONFIG_ISI=m
2895a2974,2975
> CONFIG_NOZOMI=m
> CONFIG_ISI=m
2898,2899c2978
< CONFIG_RISCOM8=m
< CONFIG_SPECIALIX=m
---
> CONFIG_DEVKMEM=y
2901,2903d2979
< CONFIG_STALLION=m
< CONFIG_ISTALLION=m
< CONFIG_NOZOMI=m
2939c3015
< # CONFIG_SERIAL_OF_PLATFORM is not set
---
> CONFIG_SERIAL_OF_PLATFORM=m
2941d3016
< # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
2948,2951d3022
< CONFIG_UNIX98_PTYS=y
< CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
< CONFIG_LEGACY_PTYS=y
< CONFIG_LEGACY_PTY_COUNT=256
2953c3024
< CONFIG_PRINTER=m
---
> CONFIG_PRINTER=y
3053a3125,3126
> CONFIG_I2C_PXA=m
> CONFIG_I2C_PXA_PCI=y
3060a3134
> CONFIG_I2C_DIOLAN_U2C=m
3083a3158
> CONFIG_SPI_ALTERA=m
3087a3163
> CONFIG_SPI_OC_TINY=m
3210a3287,3288
> CONFIG_BATTERY_BQ27X00_I2C=y
> CONFIG_BATTERY_BQ27X00_PLATFORM=y
3261a3340
> CONFIG_SENSORS_LINEAGE=m
3274a3354
> CONFIG_SENSORS_LTC4151=m
3280a3361
> CONFIG_SENSORS_MAX6639=m
3284a3366,3370
> CONFIG_PMBUS=m
> CONFIG_SENSORS_PMBUS=m
> CONFIG_SENSORS_MAX16064=m
> CONFIG_SENSORS_MAX34440=m
> CONFIG_SENSORS_MAX8688=m
3294a3381,3382
> CONFIG_SENSORS_SCH5627=m
> CONFIG_SENSORS_ADS1015=m
3301a3390
> # CONFIG_SENSORS_TWL4030_MADC is not set
3318d3406
< CONFIG_SENSORS_LIS3_I2C=m
3326d3413
< CONFIG_SENSORS_LIS3LV02D=m
3421a3509
> CONFIG_TPS6105X=m
3424a3513
> CONFIG_TWL4030_MADC=m
3432a3522
> CONFIG_MFD_MAX8997=y
3451a3542
> CONFIG_AB8500_GPADC=y
3463c3554
< # CONFIG_REGULATOR_DUMMY is not set
---
> CONFIG_REGULATOR_DUMMY=y
3472a3564
> CONFIG_REGULATOR_MAX8997=m
3487a3580
> CONFIG_REGULATOR_TPS6105X=m
3500a3594
> CONFIG_MEDIA_CONTROLLER=y
3502a3597
> CONFIG_VIDEO_V4L2_SUBDEV_API=y
3523a3619
> CONFIG_IR_ITE_CIR=m
3562a3659,3661
> CONFIG_VIDEOBUF2_CORE=m
> CONFIG_VIDEOBUF2_MEMOPS=m
> CONFIG_VIDEOBUF2_VMALLOC=m
3660a3760
> CONFIG_MEDIA_ALTERA_CI=m
3669a3770
> CONFIG_VIDEO_NOON010PC30=m
3683a3785
> CONFIG_SOC_CAMERA_OV9740=m
3699a3802
> CONFIG_USB_GSPCA_NW80X=m
3725a3829
> CONFIG_USB_GSPCA_VICAM=m
3778a3883,3887
> 
> #
> # Texas Instruments WL128x FM driver (ST based)
> #
> CONFIG_RADIO_WL128X=m
3829a3939
> CONFIG_DVB_USB_TECHNISAT_USB2=m
3861a3972,3975
> 
> #
> # Supported FireWire (IEEE 1394) Adapters
> #
3863,3864d3976
< CONFIG_DVB_FIREDTV_FIREWIRE=y
< # CONFIG_DVB_FIREDTV_IEEE1394 is not set
3945a4058
> CONFIG_DVB_DIB9000=m
3948a4062
> CONFIG_DVB_STV0367=m
4028d4141
< # CONFIG_DRM_I830 is not set
4069a4183
> CONFIG_FB_CYBER2000_DDC=y
4157a4272
> CONFIG_LCD_LD9040=m
4164c4279
< # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
---
> CONFIG_BACKLIGHT_APPLE=m
4391a4507,4510
> CONFIG_SND_USB_6FIRE=m
> CONFIG_SND_FIREWIRE=y
> CONFIG_SND_FIREWIRE_LIB=m
> CONFIG_SND_FIREWIRE_SPEAKERS=m
4411a4531
> CONFIG_SND_SOC_CS4271=m
4414a4535
> CONFIG_SND_SOC_DFBMCS320=m
4415a4537
> CONFIG_SND_SOC_MAX9850=m
4416a4539
> CONFIG_SND_SOC_SGTL5000=m
4420a4544
> CONFIG_SND_SOC_TVL320AIC32X4=m
4457a4582
> CONFIG_SND_SOC_WM8991=m
4461a4587
> CONFIG_SND_SOC_LM4857=m
4503c4629
< CONFIG_HID_3M_PCT=m
---
> CONFIG_HID_3M_PCT=y
4509c4635
< CONFIG_HID_CANDO=m
---
> CONFIG_HID_CANDO=y
4517d4642
< # CONFIG_HID_EGALAX is not set
4519a4645
> CONFIG_HID_KEYTOUCH=y
4521,4522c4647,4648
< CONFIG_HID_UCLOGIC=m
< CONFIG_HID_WALTOP=m
---
> CONFIG_HID_UCLOGIC=y
> CONFIG_HID_WALTOP=y
4525a4652
> CONFIG_HID_LCPOWER=y
4533c4660
< CONFIG_HID_MOSART=m
---
> CONFIG_HID_MOSART=y
4535c4662
< CONFIG_HID_MULTITOUCH=m
---
> CONFIG_HID_MULTITOUCH=y
4537c4664
< CONFIG_HID_ORTEK=m
---
> CONFIG_HID_ORTEK=y
4546,4550c4673,4680
< CONFIG_HID_QUANTA=m
< CONFIG_HID_ROCCAT=m
< CONFIG_HID_ROCCAT_KONE=m
< CONFIG_HID_ROCCAT_KONEPLUS=m
< CONFIG_HID_ROCCAT_PYRA=m
---
> CONFIG_HID_QUANTA=y
> CONFIG_HID_ROCCAT=y
> CONFIG_HID_ROCCAT_COMMON=y
> CONFIG_HID_ROCCAT_ARVO=y
> CONFIG_HID_ROCCAT_KONE=y
> CONFIG_HID_ROCCAT_KONEPLUS=y
> CONFIG_HID_ROCCAT_KOVAPLUS=y
> CONFIG_HID_ROCCAT_PYRA=y
4553c4683
< CONFIG_HID_STANTUM=m
---
> CONFIG_HID_STANTUM=y
4620c4750
< CONFIG_USB_TMC=m
---
> CONFIG_USB_TMC=y
4630a4761
> CONFIG_USB_STORAGE_REALTEK=y
4641a4773
> CONFIG_USB_STORAGE_ENE_UB6250=y
4744a4877
> # CONFIG_USB_GADGET_FUSB300 is not set
4749c4882,4883
< # CONFIG_USB_GADGET_CI13XXX_PCI is not set
---
> CONFIG_USB_GADGET_CI13XXX_PCI=y
> CONFIG_USB_CI13XXX_PCI=m
4752,4753c4886
< CONFIG_USB_GADGET_LANGWELL=y
< CONFIG_USB_LANGWELL=m
---
> # CONFIG_USB_GADGET_LANGWELL is not set
4818c4951
< CONFIG_MMC_SDHCI_OF=m
---
> CONFIG_MMC_SDHCI_OF=y
4822c4955
< CONFIG_MMC_SDRICOH_CS=m
---
> CONFIG_MMC_SDRICOH_CS=y
4825c4958
< CONFIG_MMC_USHC=m
---
> CONFIG_MMC_USHC=y
4839a4973
> CONFIG_MEMSTICK_R592=y
4846a4981
> CONFIG_LEDS_LM3530=m
5017,5020c5152,5155
< CONFIG_INTEL_MID_DMAC=m
< CONFIG_INTEL_IOATDMA=m
< CONFIG_TIMB_DMA=m
< CONFIG_PCH_DMA=m
---
> CONFIG_INTEL_MID_DMAC=y
> CONFIG_INTEL_IOATDMA=y
> CONFIG_TIMB_DMA=y
> CONFIG_PCH_DMA=y
5028,5029c5163,5164
< CONFIG_DMATEST=m
< CONFIG_DCA=m
---
> # CONFIG_DMATEST is not set
> CONFIG_DCA=y
5045a5181,5186
> CONFIG_STALLION=m
> CONFIG_ISTALLION=m
> CONFIG_DIGIEPCA=m
> CONFIG_RISCOM8=m
> CONFIG_SPECIALIX=m
> CONFIG_COMPUTONE=m
5064,5066c5205
< # CONFIG_USB_DABUSB is not set
< # CONFIG_USB_SE401 is not set
< # CONFIG_USB_VICAM is not set
---
> CONFIG_DVB_CXD2099=m
5075c5214
< # CONFIG_BRCM80211_PCI is not set
---
> CONFIG_BRCMSMAC=y
5076a5216
> CONFIG_BRCMDBG=y
5205a5346,5348
> CONFIG_FB_OLPC_DCON=m
> CONFIG_FB_OLPC_DCON_1=y
> CONFIG_FB_OLPC_DCON_1_5=y
5215a5359,5360
> CONFIG_RTS_PSTOR=m
> # CONFIG_RTS_PSTOR_DEBUG is not set
5220d5364
< # CONFIG_AUTOFS_FS is not set
5264a5409
> CONFIG_IIO_KFIFO_BUF=m
5277a5423,5424
> CONFIG_LIS3L02DQ_BUF_KFIFO=y
> # CONFIG_LIS3L02DQ_BUF_RING_SW is not set
5289a5437,5439
> CONFIG_AD7606=m
> CONFIG_AD7606_IFACE_PARALLEL=m
> CONFIG_AD7606_IFACE_SPI=m
5311a5462
> CONFIG_MAX517=m
5331d5481
< # CONFIG_ADIS16251 is not set
5377a5528
> CONFIG_IIO_SYSFS_TRIGGER=m
5378a5530
> CONFIG_XVMALLOC=y
5379a5532
> # CONFIG_ZRAM_DEBUG is not set
5382d5534
< CONFIG_SAMSUNG_LAPTOP=m
5389,5393d5540
< 
< #
< # Texas Instruments shared transport line discipline
< #
< # CONFIG_ST_BT is not set
5399,5400d5545
< # CONFIG_LIRC_IT87 is not set
< # CONFIG_LIRC_ITE8709 is not set
5408d5552
< # CONFIG_SMB_FS is not set
5409a5554,5556
> CONFIG_EASYCAP_SND=y
> # CONFIG_EASYCAP_OSS is not set
> # CONFIG_EASYCAP_DEBUG is not set
5436a5584
> CONFIG_FT1000_PCMCIA=m
5458a5607,5612
> CONFIG_DRM_PSB=m
> 
> #
> # Altera FPGA firmware download module
> #
> # CONFIG_ALTERA_STAPL is not set
5460,5461c5614,5615
< CONFIG_ACER_WMI=m
< CONFIG_ACERHDF=m
---
> CONFIG_ACER_WMI=y
> CONFIG_ACERHDF=y
5464c5618,5619
< CONFIG_FUJITSU_LAPTOP=m
---
> CONFIG_DELL_WMI_AIO=y
> CONFIG_FUJITSU_LAPTOP=y
5467,5468c5622,5624
< CONFIG_HP_WMI=m
< CONFIG_MSI_LAPTOP=m
---
> CONFIG_HP_ACCEL=y
> CONFIG_HP_WMI=y
> CONFIG_MSI_LAPTOP=y
5470,5471c5626,5627
< CONFIG_COMPAL_LAPTOP=m
< CONFIG_SONY_LAPTOP=m
---
> CONFIG_COMPAL_LAPTOP=y
> CONFIG_SONY_LAPTOP=y
5473,5475c5629,5630
< CONFIG_IDEAPAD_LAPTOP=m
< CONFIG_THINKPAD_ACPI=m
< CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
---
> CONFIG_IDEAPAD_LAPTOP=y
> CONFIG_THINKPAD_ACPI=y
5481c5636
< CONFIG_SENSORS_HDAPS=m
---
> CONFIG_SENSORS_HDAPS=y
5483,5484c5638,5641
< CONFIG_EEEPC_LAPTOP=m
< CONFIG_EEEPC_WMI=m
---
> CONFIG_EEEPC_LAPTOP=y
> CONFIG_ASUS_WMI=y
> CONFIG_ASUS_NB_WMI=y
> CONFIG_EEEPC_WMI=y
5489c5646
< CONFIG_ACPI_TOSHIBA=m
---
> CONFIG_ACPI_TOSHIBA=y
5491,5494c5648,5653
< CONFIG_ACPI_CMPC=m
< CONFIG_INTEL_IPS=m
< CONFIG_IBM_RTL=m
< CONFIG_XO1_RFKILL=m
---
> CONFIG_ACPI_CMPC=y
> CONFIG_INTEL_IPS=y
> CONFIG_IBM_RTL=y
> CONFIG_XO1_RFKILL=y
> CONFIG_XO15_EBOOK=y
> CONFIG_SAMSUNG_LAPTOP=y
5505a5665
> CONFIG_DMI_SYSFS=y
5507a5668
> # CONFIG_SIGMA is not set
5661c5822
< CONFIG_LOGFS=m
---
> CONFIG_LOGFS=y
5679a5841
> CONFIG_PSTORE=y
5710c5872
< CONFIG_RPCSEC_GSS_KRB5=y
---
> CONFIG_RPCSEC_GSS_KRB5=m
5816a5979
> CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
5824a5988
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
5829d5992
< CONFIG_BKL=y
5912a6076
> # CONFIG_INTEL_TXT is not set
6101a6266
> CONFIG_BCH=y
6110a6276
> CONFIG_CPU_RMAP=y
---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[Justin P. Mattock]

On 04/30/2011 11:31 AM, werner wrote:
> Since years it's all the time that I compile the kernel with everything
> enabled, because these kernel builds are for a distro, and should work
> on any computer. Normally, things going stable at -rc3 or -rc4 , often
> already at -rc2.
>
> Beside of with my computer, essentially the same problems also happens
> with a laptop of a friend.
>
> Also, a big problem are the (after-boot-) crashs if zipping / unzipping
> big files. Packages I can build only with 2.6.38.4, not with 2.6.39-rcX
>
> Below is the diff between the config of 2.6.38.4 and 2.6 39-rc5-git3 .
> You could inspect them what potentially could explain the reported
> problems. But I think at least the problems which happens on my
> computer, and on that of the friend, are regressions, because none of
> the new staging drivers we use.
>
> wl
>

make localmodconfig for a small .config and also use some kind of early 
debugger(under kernel hacking) to grab the crash info so linus can see 
the problem.

Justin P. Mattock

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

2011/4/30 werner <w.landgraf@ru.ru>:
>
> On the other hand, there occurs also ocasional crashs during booting in an
> earlier stage. See the 2nd foto anexed.

Oh, you have KMEMLEAK enabled too.

Disable it. It is very useful when looking for leaks and when it
works, but it often doesn't work, and just leads to problems.

                  Linus

Re: 2.6.39-rc5-git2 boot crashs

[werner]

   Just now I compiled 2.6.39-rc6-git1 (including still 
the patchs by hand because not yet included), its also OK, 
good running, without all these problems.  :)

Yes, I continue with my everythingyesconfig, which all the 
time and also now
after this patchs gives good generic kernels for the 
distro, working good on my
server and on the laptops of the neighbours except that 
sometimes
(instead of ELAN) I'll make 486 binaries. And now put the 
package on the mirrors because everything is OK, and I 
dont need to switch on and off the server so that they can 
sync, and the users can use the now working packages of 
2.6.39-rcX ,
which have many new drivers and other good improvements.

Like since years, I continue to compile new versions since 
-rc1 and report problems.
But it was very important that Linus take care of these 
problems now, because
nobody else searched for the reasons. These bugs in logfs 
and in slub.c and percpu.h
probably were processor-type / arch independent, and would 
have given problems
for the most users, so that they could not have been 
ignored.
wl




=======================================================
On Thu, 5 May 2011 08:02:04 +0200
  Ingo Molnar <mingo@elte.hu> wrote:
> 
> * werner <w.landgraf@ru.ru> wrote:
> 
>> I'll test the patchs with a 486 config, switching off 
>>ELAN.
> 
> I think you can skip all those other test suggestions in 
>this thread - as you 
> confirmed in this email the root cause of your crashes 
>has been found.
> 
> So the best testing you could do would be for you to 
>resume testing whatever 
> original config you were using on your system, and make 
>sure there's really no 
> crashes left - and report any other regressions you 
>might see.
> 
> Thanks,
> 
> 	Ingo
> 
> 

"werner" <w.landgraf@ru.ru>
---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[Borislav Petkov]

On Wed, May 04, 2011 at 09:38:54AM +0200, Ingo Molnar wrote:
> 
> * Borislav Petkov <bp@alien8.de> wrote:
> 
> > On Tue, May 03, 2011 at 02:45:10PM -0700, Linus Torvalds wrote:
> > > Now, Werner is actually _running_ on an AMD Opteron (or whatever
> > > family 15 is), I think.
> > 
> > http://marc.info/?l=linux-kernel&m=130438580705332 says it's a AMD
> > Athlon(tm) 64 X2 Dual Core Processor 4800+, i.e. a good old K8 desktop.
> > The X86_ELAN Kconfig option, however, says:
> > 
> > config X86_ELAN
> > 	bool "AMD Elan"
> > 	depends on X86_32
> > 	depends on X86_EXTENDED_PLATFORM
> > 	---help---
> > 	  Select this for an AMD Elan processor.
> > 
> > 	  Do not use this option for K6/Athlon/Opteron processors!
> > 
> > 	  If unsure, choose "PC-compatible" instead.
> > 
> > so if the sentence before last used to mean anything, this could be a
> > problem. Quick search about it gives http://lkml.org/lkml/2004/1/12/239
> > which introduces that different compiler arch for ELAN: -march=i486,
> > which could conflict with the generic selection?
> 
> Well, but CONFIG_X86_ELAN=y always worked/booted fine on generic hardware - 
> including later AMD CPUs. I have booted it on an AMD Athlon64 CPU today:
> 
>  config-Wed_May__4_09_26_50_CEST_2011.good:CONFIG_X86_32_SMP=y
>  config-Wed_May__4_09_26_50_CEST_2011.good:CONFIG_MELAN=y
>  config-Wed_May__4_09_26_50_CEST_2011.good:CONFIG_SMP=y
> 
> When it comes to regressions it's past behavior that counts, not the Kconfig 
> help text.

Right, I was referring to the odd problem Linus was talking about:

"He had CONFIG_X86_EXTENDED_PLATTFORM and CONFIG_X86_ELAN on, and that
has apparently worked for him (and a lot of other people - he does a
distribution) up until 2.6.38. But as of 2.6.39-rc1 it causes some
really odd problems under IO (his test-case is "unzip", but that's
probably fairly random). The problem seems to show up as a bogus IO list
for SATA, causing a big WARN_ON() or oops and then a dead machine due to
IO problems."

So booting might've not triggered it. But reportedly .38 was fine so
yeah, the Kconfig help text might not even mean anything anymore.

Maybe I should run the same .config and test case on a K8 box here to
see what happens.

@Werner: can you send me the exact .config and the testcase that
triggers the issue?

Thanks.

-- 
Regards/Gruss,
    Boris.

Re: 2.6.39-rc5-git2 boot crashs

[Ingo Molnar]

* Borislav Petkov <bp@alien8.de> wrote:

> On Tue, May 03, 2011 at 02:45:10PM -0700, Linus Torvalds wrote:
> > Now, Werner is actually _running_ on an AMD Opteron (or whatever
> > family 15 is), I think.
> 
> http://marc.info/?l=linux-kernel&m=130438580705332 says it's a AMD
> Athlon(tm) 64 X2 Dual Core Processor 4800+, i.e. a good old K8 desktop.
> The X86_ELAN Kconfig option, however, says:
> 
> config X86_ELAN
> 	bool "AMD Elan"
> 	depends on X86_32
> 	depends on X86_EXTENDED_PLATFORM
> 	---help---
> 	  Select this for an AMD Elan processor.
> 
> 	  Do not use this option for K6/Athlon/Opteron processors!
> 
> 	  If unsure, choose "PC-compatible" instead.
> 
> so if the sentence before last used to mean anything, this could be a
> problem. Quick search about it gives http://lkml.org/lkml/2004/1/12/239
> which introduces that different compiler arch for ELAN: -march=i486,
> which could conflict with the generic selection?

Well, but CONFIG_X86_ELAN=y always worked/booted fine on generic hardware - 
including later AMD CPUs. I have booted it on an AMD Athlon64 CPU today:

 config-Wed_May__4_09_26_50_CEST_2011.good:CONFIG_X86_32_SMP=y
 config-Wed_May__4_09_26_50_CEST_2011.good:CONFIG_MELAN=y
 config-Wed_May__4_09_26_50_CEST_2011.good:CONFIG_SMP=y

When it comes to regressions it's past behavior that counts, not the Kconfig 
help text.

Thanks,

	Ingo

Re: 2.6.39-rc5-git2 boot crashs

[Borislav Petkov]

On Tue, May 03, 2011 at 02:45:10PM -0700, Linus Torvalds wrote:
> Now, Werner is actually _running_ on an AMD Opteron (or whatever
> family 15 is), I think.

http://marc.info/?l=linux-kernel&m=130438580705332 says it's a AMD
Athlon(tm) 64 X2 Dual Core Processor 4800+, i.e. a good old K8 desktop.
The X86_ELAN Kconfig option, however, says:

config X86_ELAN
	bool "AMD Elan"
	depends on X86_32
	depends on X86_EXTENDED_PLATFORM
	---help---
	  Select this for an AMD Elan processor.

	  Do not use this option for K6/Athlon/Opteron processors!

	  If unsure, choose "PC-compatible" instead.

so if the sentence before last used to mean anything, this could be a
problem. Quick search about it gives http://lkml.org/lkml/2004/1/12/239
which introduces that different compiler arch for ELAN: -march=i486,
which could conflict with the generic selection?

Hmm.

-- 
Regards/Gruss,
    Boris.

Re: 2.6.39-rc5-git2 boot crashs

[Ingo Molnar]

* werner <w.landgraf@ru.ru> wrote:

> Enclosed also the screen fotos of the zip crash from now, and of the
> secondary reboot-resistent ata error which came back too.

All the oopses have scrolled off and the pictures are blurry, so it's not 
possible to see the backtraces clearly.

To prevent the scroll-off please add these boot options:

   pause_on_oops=600 initcall_debug debug ignore_loglevel

This should rate-limit the crash to one oops per 600 seconds. The first one is 
probably the most interesting one.

Also, does the vga=ask boot option added to the ones above work for you?

If yes then on bootup select a VGA mode that has as many lines as possible (to 
capture a big oops screen) - but in this case it's doubly important that the 
picture you take is *sharp*.

Thanks,

	Ingo

Re: 2.6.39-rc5-git2 boot crashs

[werner]

[-- Attachment #1: Type: text/plain, Size: 2276 bytes --]

The result of the test below is:


The big-file-zip / unzip / very-big-file-moving crashs 
returned

The sync error didn't return

after switching on CONFIG-X86_EXTENDED_PLATFORMS inclusive 
CONFIG_ELAN, and also let ON the RDC321X_WDT,
ELAN-CPUFREQ, CONFIG-SC500-CPUFREQ (BTREE switched off 
anyway).



Thus, the first problem (zip..) cames from switching on 
EXTENDED PLATFORMS etc , but the second (sync) comes from 
MISC-FILESYSTEMS of which a part incl logfs continued 
unchanged switched OFF, like also the (not-crashing) error 
message came from this.



As said, before was used a config (with EXTENDED_PLATFORMS 
etc OFF) which yesterday runned stable almost the whole 
day and didnt show any of the reported problems.  But 
after this mail, for better security, I'll return to it 
and try to provoke a crash (unzipping bigger files etc) to 
reaffirm that its really stable.


Annexed are:

/ config used
/ The difference of that config to the previous stable 
one.  The zip error should be caused by these differences
/ The difference of the previous stable config, to the 
initial everythingyes config. If this stable config was 
really stable, then all problems reported by me since 
2.6.35-rc3 should be caused by these differences.  (this 
file I sent already, it's for comparison, and as a 
summary)


W.Landgraf




=====================
I started already the compilation suggested before, ie let
CONFIG_MISC_FILESYSTEMS unchanged like it was at the last 
stable config, with logfs OFF,
but switching on CONFIG-X86_EXTENDED_PLATFORMS, and also 
let ON the RDC321X_WDT,
ELAN-CPUFREQ, CONFIG-SC500-CPUFREQ (BTREE switched off 
anyway).
Thus, with exception of the items switched off in 
MISC-FILESYSTEMS (incl. logfs),
it's the same like on my first everyyesconfig.

If the problems don't return, then the reason is anywhere 
in MISC-FILESYSTEMS, one
of the few features which I switched off now, inclusive 
logfs.

If the problems return, then they are because of the 
EXTENDED-PLATFORMS (incl. ELAN) or in one of the 3 items 
quoted above. However, then still the reported boot error
message can be because logfs.

After this is ready, I report about the results, and I do 
what you write below.

wl
---
Professional hosting for everyone - http://www.host.ru

[-- Attachment #2: diff.zipproblem --]
[-- Type: application/octet-stream, Size: 1530 bytes --]

4c4
< # Mon May  2 22:27:06 2011
---
> # Tue May  3 18:58:52 2011
279c279,283
< # CONFIG_X86_EXTENDED_PLATFORM is not set
---
> CONFIG_X86_EXTENDED_PLATFORM=y
> CONFIG_X86_ELAN=y
> # CONFIG_X86_MRST is not set
> CONFIG_X86_RDC321X=y
> # CONFIG_X86_32_NON_STANDARD is not set
293,318c297
< # CONFIG_M386 is not set
< # CONFIG_M486 is not set
< # CONFIG_M586 is not set
< # CONFIG_M586TSC is not set
< # CONFIG_M586MMX is not set
< CONFIG_M686=y
< # CONFIG_MPENTIUMII is not set
< # CONFIG_MPENTIUMIII is not set
< # CONFIG_MPENTIUMM is not set
< # CONFIG_MPENTIUM4 is not set
< # CONFIG_MK6 is not set
< # CONFIG_MK7 is not set
< # CONFIG_MK8 is not set
< # CONFIG_MCRUSOE is not set
< # CONFIG_MEFFICEON is not set
< # CONFIG_MWINCHIPC6 is not set
< # CONFIG_MWINCHIP3D is not set
< # CONFIG_MGEODEGX1 is not set
< # CONFIG_MGEODE_LX is not set
< # CONFIG_MCYRIXIII is not set
< # CONFIG_MVIAC3_2 is not set
< # CONFIG_MVIAC7 is not set
< # CONFIG_MCORE2 is not set
< # CONFIG_MATOM is not set
< # CONFIG_X86_GENERIC is not set
< CONFIG_X86_INTERNODE_CACHE_SHIFT=5
---
> CONFIG_X86_INTERNODE_CACHE_SHIFT=4
321c300
< CONFIG_X86_L1_CACHE_SHIFT=5
---
> CONFIG_X86_L1_CACHE_SHIFT=4
323d301
< # CONFIG_X86_PPRO_FENCE is not set
328,332c306,307
< CONFIG_X86_USE_PPRO_CHECKSUM=y
< CONFIG_X86_TSC=y
< CONFIG_X86_CMPXCHG64=y
< CONFIG_X86_CMOV=y
< CONFIG_X86_MINIMUM_CPU_FAMILY=5
---
> CONFIG_X86_ALIGNMENT_16=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=4
518a494,495
> CONFIG_ELAN_CPUFREQ=y
> CONFIG_SC520_CPUFREQ=y
3472a3450
> CONFIG_RDC321X_WDT=m

[-- Attachment #3: config.zipproblem --]
[-- Type: application/octet-stream, Size: 137480 bytes --]

#
# Automatically generated make config: don't edit
# Linux/i386 2.6.39-rc5-git4 Kernel Configuration
# Tue May  3 18:58:52 2011
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-i486-1sys"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=21
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_ELAN=y
# CONFIG_X86_MRST is not set
CONFIG_X86_RDC321X=y
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_X86_32_IRIS=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=4
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_IOMMU_API=y
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="\"\""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_POWER_METER=m
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=m
# CONFIG_ACPI_APEI_PCIEAER is not set
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_ELAN_CPUFREQ=y
CONFIG_SC520_CPUFREQ=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=y
CONFIG_X86_E_POWERSAVER=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
CONFIG_OLPC_XO1=m
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_I82365=y
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_COMPAQ=y
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_TSI500=y
CONFIG_RAPIDIO_DEBUG=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
# CONFIG_NETFILTER_XT_SET is not set

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_MCP251X=m
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_PCH_CAN=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_TSCAN1=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m

#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_ARCH_NO_SYSDEV_OPS=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_TESTS=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_AR7_PARTS=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_SWAP=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
CONFIG_MTD_TS5500=y
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_SCx200_DOCFLASH=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
CONFIG_MTD_L440GX=y
CONFIG_MTD_PCI=y
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_GPIO_ADDR=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=y
CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_CS553X=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_ALAUDA=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=y

#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_SPI=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=y
CONFIG_PARIDE=y

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
CONFIG_PARIDE_PCD=y
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
CONFIG_PARIDE_PG=y

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
CONFIG_PARIDE_BPCK=y
CONFIG_PARIDE_BPCK6=y
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
CONFIG_PARIDE_EPAT=y
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=y
CONFIG_PARIDE_FRIQ=y
CONFIG_PARIDE_FRPW=y
CONFIG_PARIDE_KBIC=y
CONFIG_PARIDE_KTTI=y
CONFIG_PARIDE_ON20=y
CONFIG_PARIDE_ON26=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_DRBD=y
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_OSD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_BLK_DEV_RBD=y
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=m
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=m
CONFIG_PCH_PHUB=m
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=m
# CONFIG_IWMC3200TOP_DEBUG is not set
# CONFIG_IWMC3200TOP_DEBUGFS is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_LEGACY=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_DELKIN=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_CS5535=y
CONFIG_BLK_DEV_CS5536=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_SC1200=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT8172=y
CONFIG_BLK_DEV_IT8213=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_TC86C001=y

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=y
CONFIG_BLK_DEV_ALI14XX=y
CONFIG_BLK_DEV_DTC2278=y
CONFIG_BLK_DEV_HT6560B=y
CONFIG_BLK_DEV_QD65XX=y
CONFIG_BLK_DEV_UMC8672=y
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_7000FASST=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_IN2000=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_DTC3280=y
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_FD_MCS=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IBMMCA=y
CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
CONFIG_IBMMCA_SCSI_DEV_RESET=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=y
CONFIG_SCSI_NCR_D700=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_NCR_Q720=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_LPFC_DEBUG_FS=y
CONFIG_SCSI_SIM710=y
CONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_T128=y
CONFIG_SCSI_U14_34F=y
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_RAID=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
# CONFIG_LOOPBACK_TARGET_CDB_DEBUG is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM63XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_ELMC=m
CONFIG_ELMC_II=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRAMCA=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_DNET=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
CONFIG_NE2_MCA=m
CONFIG_IBMLANA=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_AC3200=m
CONFIG_KSZ884X_PCI=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_CS89x0=m
CONFIG_E100=y
CONFIG_LNE390=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_NE3210=m
CONFIG_ES3210=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=y
CONFIG_DE620=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_JME=m
CONFIG_STMMAC_ETH=m
CONFIG_STMMAC_DA=y
CONFIG_STMMAC_DUAL_MAC=y
CONFIG_PCH_GBE=m
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4VF=m
CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_BNA=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_BE2NET=m
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_MADGEMC=m
CONFIG_SMCTR=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_AR9170_USB=m
CONFIG_AR9170_LEDS=y
# CONFIG_CARL9170 is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLAGN=m

#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEVICE_TRACING=y
CONFIG_IWL_P2P=y
CONFIG_IWLWIFI_LEGACY=m

#
# Debugging Options
#
# CONFIG_IWLWIFI_LEGACY_DEBUG is not set
# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
CONFIG_IWL4965=m
CONFIG_IWL3945=m
CONFIG_IWM=m
# CONFIG_IWM_DEBUG is not set
CONFIG_IWM_TRACING=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_HT=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RTL8192CE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTL8192C_COMMON=m
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX_MENU=m
CONFIG_WL12XX=m
CONFIG_WL12XX_HT=y
CONFIG_WL12XX_SPI=m
CONFIG_WL12XX_SDIO=m
CONFIG_WL12XX_SDIO_TEST=m
CONFIG_WL12XX_PLATFORM_DATA=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
CONFIG_CAIF_SPI_SLAVE=m
CONFIG_CAIF_SPI_SYNC=y
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_PPTP=m
CONFIG_PPPOATM=y
CONFIG_PPPOL2TP=m
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m

#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_HTCPEN=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_AB8500_PONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATLAS_BTNS=y
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_ADXL34X_SPI=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_DEVKMEM=y
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=m

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_MAX3107=m
CONFIG_SERIAL_MRST_MAX3110=m
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_OF_PLATFORM=m
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_IFX6X60=m
CONFIG_SERIAL_PCH_UART=m
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PXA=m
CONFIG_I2C_PXA_PCI=y
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
CONFIG_I2C_EG20T=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_STUB=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_TOPCLIFF_PCH=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=m
# CONFIG_SPI_DW_MID_DMA is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m

#
# PPS generators support
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_BASIC_MMIO=m
CONFIG_GPIO_IT8761E=m
CONFIG_GPIO_SCH=m
CONFIG_GPIO_VX855=m

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_WM8350=m
CONFIG_GPIO_WM8994=m
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ADP5588=m

#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=m
CONFIG_GPIO_LANGWELL=y
CONFIG_GPIO_PCH=m
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_RDC321X=m

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_74X164=m

#
# AC97 GPIO expanders:
#
CONFIG_GPIO_UCB1400=y

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=m
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=m
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_OLPC=m
CONFIG_BATTERY_BQ20Z75=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_PCF50633=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_GPIO=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_PKGTEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TWL4030_MADC is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_MC13783_ADC=m

#
# ACPI drivers
#
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_WM8350_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_GEODE_WDT=m
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_RDC321X_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=m
CONFIG_HTC_I2CPLD=y
CONFIG_UCB1400_CORE=m
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_MADC=m
CONFIG_TWL4030_CODEC=y
CONFIG_TWL6030_PWM=m
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_PCF50633=m
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=m
CONFIG_EZX_PCAP=y
CONFIG_AB8500_CORE=y
CONFIG_AB8500_DEBUG=y
CONFIG_AB8500_GPADC=y
CONFIG_AB3550_CORE=y
CONFIG_MFD_CS5535=m
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_VX855=m
CONFIG_MFD_WL1273_CORE=m
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_BQ24022=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8925=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=m
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_WM8994=m
CONFIG_REGULATOR_DA903X=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_PCAP=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_AB3100=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_TPS6586X=m
CONFIG_REGULATOR_TPS6524X=m
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_RC_CORE=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_LIRC_CODEC=y
CONFIG_IR_ENE=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMISE=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y

#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_TIMBERDALE=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_SAA7164=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_VIA_CAMERA=m
CONFIG_VIDEO_NOON010PC30=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_IMX074=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_SOC_CAMERA_MT9T112=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_SOC_CAMERA_RJ54N1=m
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_SOC_CAMERA_OV2640=m
CONFIG_SOC_CAMERA_OV6650=m
CONFIG_SOC_CAMERA_OV772X=m
CONFIG_SOC_CAMERA_OV9640=m
CONFIG_SOC_CAMERA_OV9740=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_USB_ET61X251=m
CONFIG_USB_SN9C102=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_ZOLTRIX=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_MR800=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_TIMBERDALE=m
CONFIG_RADIO_WL1273=m

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_SIANO_MDTV=m

#
# Siano module components
#
CONFIG_SMS_USB_DRV=m
CONFIG_SMS_SDIO_DRV=m

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=m

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y

#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=m

#
# Supported Mantis Adapters
#
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m

#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=m

#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRX397XD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_I810=y
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_STUB_POULSBO=m
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
CONFIG_FB_UVESA=y
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=m
CONFIG_FB_UDL=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_BROADSHEET=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_LD9040=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_DA903X=m
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_MDA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_OPL4_LIB_SEQ=m
CONFIG_SND_SBAWE_SEQ=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_WSS_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT1605=m
CONFIG_SND_AZT2316=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4236=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_SC6000=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_JAZZ16=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_MSND_PINNACLE=m
CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
# CONFIG_SND_SOC_CACHE_LZO is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_88PM860X=m
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_AD1836=m
CONFIG_SND_SOC_AD193X=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_ADS117X=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK4671=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CX20442=m
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_DA7210=m
CONFIG_SND_SOC_DFBMCS320=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX9850=m
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC26=m
CONFIG_SND_SOC_TVL320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320DAC33=m
CONFIG_SND_SOC_TWL4030=m
CONFIG_SND_SOC_TWL6040=m
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WL1273=m
CONFIG_SND_SOC_WM8350=m
CONFIG_SND_SOC_WM8400=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8727=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8955=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WM8988=m
CONFIG_SND_SOC_WM8990=m
CONFIG_SND_SOC_WM8991=m
CONFIG_SND_SOC_WM8993=m
CONFIG_SND_SOC_WM8994=m
CONFIG_SND_SOC_WM8995=m
CONFIG_SND_SOC_WM9081=m
CONFIG_SND_SOC_LM4857=m
CONFIG_SND_SOC_MAX9877=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_WM2000=m
CONFIG_SND_SOC_WM9090=m
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_3M_PCT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=m
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CANDO=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWII_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MOSART=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_QUANTA=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_ROCCAT_COMMON=y
CONFIG_HID_ROCCAT_ARVO=y
CONFIG_HID_ROCCAT_KONE=y
CONFIG_HID_ROCCAT_KONEPLUS=y
CONFIG_HID_ROCCAT_KOVAPLUS=y
CONFIG_HID_ROCCAT_PYRA=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_STANTUM=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WACOM_POWER_SUPPLY=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SAMBA=m
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_FUSB300 is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA_U2O is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
CONFIG_USB_GADGET_CI13XXX_PCI=y
CONFIG_USB_CI13XXX_PCI=m
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_EG20T is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
CONFIG_USB_G_DBGP_PRINTK=y
# CONFIG_USB_G_DBGP_SERIAL is not set
CONFIG_USB_G_WEBCAM=m

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=m
CONFIG_TWL4030_USB=m
CONFIG_TWL6030_USB=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_AB8500_USB=m
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_I1480U=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_OF=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_USHC=y
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_NET5501=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_ALIX2=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
CONFIG_LEDS_GPIO_OF=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_DELL_NETBOOKS=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_NFC_DEVICES=y
CONFIG_PN544_NFC=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MCE_INJ=m
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MCE=y
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_TWL4030=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_AB3100=m
CONFIG_RTC_DRV_AB8500=m

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PCAP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=y
CONFIG_INTEL_IOATDMA=y
CONFIG_TIMB_DMA=y
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=y
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_DIGIEPCA=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_COMPUTONE=m
CONFIG_ET131X=m
# CONFIG_ET131X_DEBUG is not set
CONFIG_SLICOSS=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_GO7007_OV7640=m
CONFIG_VIDEO_GO7007_SAA7113=m
CONFIG_VIDEO_GO7007_SAA7115=m
CONFIG_VIDEO_GO7007_TW9903=m
CONFIG_VIDEO_GO7007_UDA1342=m
CONFIG_VIDEO_GO7007_SONY_TUNER=m
CONFIG_VIDEO_GO7007_TW2804=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
CONFIG_DVB_CXD2099=m
CONFIG_USB_IP_COMMON=m
CONFIG_USB_IP_VHCI_HCD=m
CONFIG_USB_IP_HOST=m
# CONFIG_USB_IP_DEBUG_ENABLE is not set
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
CONFIG_ECHO=m
CONFIG_BRCM80211=m
CONFIG_BRCMSMAC=y
CONFIG_BRCMFMAC=y
CONFIG_BRCMDBG=y
CONFIG_RT2860=m
CONFIG_RT2870=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_MISC_DRIVERS=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_SKEL=m
CONFIG_COMEDI_ISA_DRIVERS=m
CONFIG_COMEDI_ACL7225B=m
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL725=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_PCM3730=m
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=m
CONFIG_COMEDI_DAS16M1=m
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=m
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_C6XDIGIO=m
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_PCMAD=m
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=m
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_POC=m
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_ADDI_APCI_035=m
CONFIG_COMEDI_ADDI_APCI_1032=m
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2016=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3001=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
CONFIG_COMEDI_ADL_PCI7230=m
CONFIG_COMEDI_ADL_PCI7296=m
CONFIG_COMEDI_ADL_PCI7432=m
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_AMPLC_PC263=m
CONFIG_COMEDI_AMPLC_PCI224=m
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_UNIOXX5=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
CONFIG_COMEDI_CB_PCIDIO=m
CONFIG_COMEDI_CB_PCIMDAS=m
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_SSV_DNP=m
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_NI_COMMON=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_FC=m
CONFIG_FB_OLPC_DCON=m
CONFIG_FB_OLPC_DCON_1=y
CONFIG_FB_OLPC_DCON_1_5=y
CONFIG_ASUS_OLED=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_R8187SE=m
CONFIG_RTL8192U=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
CONFIG_R8712_AP=y
CONFIG_RTS_PSTOR=m
# CONFIG_RTS_PSTOR_DEBUG is not set
CONFIG_TRANZPORT=m
CONFIG_POHMELFS=m
# CONFIG_POHMELFS_DEBUG is not set
CONFIG_POHMELFS_CRYPTO=y
CONFIG_IDE_PHISON=m
CONFIG_LINE6_USB=m
CONFIG_LINE6_USB_DEBUG=y
CONFIG_LINE6_USB_DUMP_CTRL=y
CONFIG_LINE6_USB_DUMP_MIDI=y
CONFIG_LINE6_USB_DUMP_PCM=y
CONFIG_LINE6_USB_RAW=y
CONFIG_LINE6_USB_IMPULSE_RESPONSE=y
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_USB_SERIAL_QUATECH2=m
CONFIG_USB_SERIAL_QUATECH_USB2=m
CONFIG_VT6655=m
CONFIG_VT6656=m
# CONFIG_HYPERV is not set
CONFIG_VME_BUS=m

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=m

#
# VME Device Drivers
#
CONFIG_VME_USER=m

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=m
CONFIG_DX_SEP=m
CONFIG_IIO=m
CONFIG_IIO_RING_BUFFER=y
CONFIG_IIO_SW_RING=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGER=y

#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16203=m
CONFIG_ADIS16204=m
CONFIG_ADIS16209=m
CONFIG_ADIS16220=m
CONFIG_ADIS16240=m
CONFIG_KXSD9=m
CONFIG_LIS3L02DQ=m
CONFIG_LIS3L02DQ_BUF_KFIFO=y
# CONFIG_LIS3L02DQ_BUF_RING_SW is not set
CONFIG_SCA3000=m

#
# Analog to digital convertors
#
CONFIG_MAX1363=m
CONFIG_MAX1363_RING_BUFFER=y
CONFIG_AD7150=m
CONFIG_AD7152=m
CONFIG_AD7291=m
CONFIG_AD7298=m
CONFIG_AD7314=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD799X=m
CONFIG_AD799X_RING_BUFFER=y
CONFIG_AD7476=m
CONFIG_AD7887=m
CONFIG_AD7745=m
CONFIG_AD7816=m
CONFIG_ADT75=m
CONFIG_ADT7310=m
CONFIG_ADT7410=m

#
# Analog digital bi-direction convertors
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m

#
# Digital to analog convertors
#
CONFIG_AD5624R_SPI=m
CONFIG_AD5446=m
CONFIG_MAX517=m

#
# Direct Digital Synthesis
#
CONFIG_AD5930=m
CONFIG_AD9832=m
CONFIG_AD9834=m
CONFIG_AD9850=m
CONFIG_AD9852=m
CONFIG_AD9910=m
CONFIG_AD9951=m

#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=m
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16260=m

#
# Inertial measurement units
#
CONFIG_ADIS16300=m
CONFIG_ADIS16350=m
CONFIG_ADIS16400=m

#
# Light sensors
#
CONFIG_SENSORS_TSL2563=m
CONFIG_SENSORS_ISL29018=m

#
# Magnetometer sensors
#
CONFIG_SENSORS_AK8975=m
CONFIG_SENSORS_HMC5843=m

#
# Active energy metering IC
#
CONFIG_ADE7753=m
CONFIG_ADE7754=m
CONFIG_ADE7758=m
CONFIG_ADE7759=m
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
CONFIG_ADE7854_SPI=m

#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S120X=m
CONFIG_AD2S1210=m
# CONFIG_AD2S1210_GPIO_INPUT is not set
# CONFIG_AD2S1210_GPIO_OUTPUT is not set
CONFIG_AD2S1210_GPIO_NONE=y

#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=m
CONFIG_IIO_GPIO_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
CONFIG_CS5535_GPIO=m
CONFIG_XVMALLOC=y
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
CONFIG_WLAGS49_H2=m
CONFIG_WLAGS49_H25=m
CONFIG_FB_SM7XX=y
CONFIG_VIDEO_DT3155=m
CONFIG_DT3155_CCIR=y
CONFIG_CRYSTALHD=m
CONFIG_CXT1E1=m
CONFIG_SBE_PMCC4_NCOMM=y
CONFIG_FB_XGI=y
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_TTUSBIR=m
CONFIG_LIRC_ZILOG=m
CONFIG_EASYCAP=m
CONFIG_EASYCAP_SND=y
# CONFIG_EASYCAP_OSS is not set
# CONFIG_EASYCAP_DEBUG is not set
CONFIG_SOLO6X10=m
CONFIG_ACPI_QUICKSTART=y
CONFIG_MACH_NO_WESTBRIDGE=y
CONFIG_SBE_2T3E3=m
CONFIG_ATH6K_LEGACY=m
CONFIG_AR600x_SD31_XXX=y
# CONFIG_AR600x_WB31_XXX is not set
# CONFIG_AR600x_SD32_XXX is not set
# CONFIG_AR600x_CUSTOM_XXX is not set
CONFIG_ATH6KL_ENABLE_COEXISTENCE=y
CONFIG_AR600x_DUAL_ANTENNA=y
# CONFIG_AR600x_SINGLE_ANTENNA is not set
# CONFIG_AR600x_BT_QCOM is not set
# CONFIG_AR600x_BT_CSR is not set
CONFIG_AR600x_BT_AR3001=y
CONFIG_ATH6KL_HCI_BRIDGE=y
CONFIG_ATH6KL_CONFIG_GPIO_BT_RESET=y
CONFIG_AR600x_BT_RESET_PIN=22
CONFIG_ATH6KL_CFG80211=y
CONFIG_ATH6KL_HTC_RAW_INTERFACE=y
CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK=y
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_USB_ENESTORAGE=m
CONFIG_BCM_WIMAX=m
CONFIG_FT1000=m
CONFIG_FT1000_USB=m
CONFIG_FT1000_PCMCIA=m

#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
CONFIG_DRM_PSB=m

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
CONFIG_ACERHDF=y
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=y
CONFIG_DELL_WMI_AIO=y
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=y
CONFIG_HP_ACCEL=y
CONFIG_HP_WMI=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
CONFIG_SONY_LAPTOP=y
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_MENLOW=y
CONFIG_EEEPC_LAPTOP=y
CONFIG_ASUS_WMI=y
CONFIG_ASUS_NB_WMI=y
CONFIG_EEEPC_WMI=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=y
CONFIG_ACPI_ASUS=y
CONFIG_TOPSTAR_LAPTOP=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_ACPI_CMPC=y
CONFIG_INTEL_IPS=y
CONFIG_IBM_RTL=y
CONFIG_XO1_RFKILL=y
CONFIG_XO15_EBOOK=y
CONFIG_SAMSUNG_LAPTOP=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_EFI_VARS is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
# CONFIG_SIGMA is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
# CONFIG_OCFS2_FS_STATS is not set
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XATTR=y
# CONFIG_SQUASHFS_LZO is not set
# CONFIG_SQUASHFS_XZ is not set
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_ROMFS_FS=y
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=y
# CONFIG_EXOFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_USE_NEW_IDMAPPER=y
CONFIG_NFSD=y
CONFIG_NFSD_DEPRECATED=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_CEPH_FS=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=0
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LKDTM is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_FPU=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=m
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=y
CONFIG_AVERAGE=y

[-- Attachment #4: diff.config.txt --]
[-- Type: text/plain, Size: 2669 bytes --]

3,4c3,4
< # Linux/i386 2.6.39-rc5-git2 Kernel Configuration
< # Fri Apr 29 15:48:26 2011
---
> # Linux/i386 2.6.39-rc5-git4 Kernel Configuration
> # Mon May  2 22:27:06 2011


279,283c279
< CONFIG_X86_EXTENDED_PLATFORM=y
< CONFIG_X86_ELAN=y
< # CONFIG_X86_MRST is not set
< CONFIG_X86_RDC321X=y
< # CONFIG_X86_32_NON_STANDARD is not set
---
> # CONFIG_X86_EXTENDED_PLATFORM is not set
297c293,318
< CONFIG_X86_INTERNODE_CACHE_SHIFT=4
---
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> CONFIG_M686=y
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MATOM is not set
> # CONFIG_X86_GENERIC is not set
> CONFIG_X86_INTERNODE_CACHE_SHIFT=5
300c321
< CONFIG_X86_L1_CACHE_SHIFT=4
---
> CONFIG_X86_L1_CACHE_SHIFT=5
301a323
> # CONFIG_X86_PPRO_FENCE is not set
306,307c328,332
< CONFIG_X86_ALIGNMENT_16=y
< CONFIG_X86_MINIMUM_CPU_FAMILY=4
---
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=5

494,495d518
< CONFIG_ELAN_CPUFREQ=y
< CONFIG_SC520_CPUFREQ=y


3450d3472
< CONFIG_RDC321X_WDT=m


5801,5807c5823,5826
< CONFIG_JFFS2_FS_WRITEBUFFER=y
< CONFIG_JFFS2_FS_WBUF_VERIFY=y
< CONFIG_JFFS2_SUMMARY=y
< CONFIG_JFFS2_FS_XATTR=y
< CONFIG_JFFS2_FS_POSIX_ACL=y
< CONFIG_JFFS2_FS_SECURITY=y
< CONFIG_JFFS2_COMPRESSION_OPTIONS=y
---
> # CONFIG_JFFS2_FS_WRITEBUFFER is not set
> # CONFIG_JFFS2_SUMMARY is not set
> # CONFIG_JFFS2_FS_XATTR is not set
> # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
5809c5828
< CONFIG_JFFS2_LZO=y
---
> # CONFIG_JFFS2_LZO is not set
5811,5815c5830
< CONFIG_JFFS2_RUBIN=y
< # CONFIG_JFFS2_CMODE_NONE is not set
< CONFIG_JFFS2_CMODE_PRIORITY=y
< # CONFIG_JFFS2_CMODE_SIZE is not set
< # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
---
> # CONFIG_JFFS2_RUBIN is not set
5818c5833
< CONFIG_UBIFS_FS_ADVANCED_COMPR=y
---
> # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
5822c5837
< CONFIG_LOGFS=y
---
> # CONFIG_LOGFS is not set
5826c5841
< CONFIG_SQUASHFS_LZO=y
---
> # CONFIG_SQUASHFS_LZO is not set
5844c5859
< CONFIG_UFS_FS_WRITE=y
---
> # CONFIG_UFS_FS_WRITE is not set

6271d6285
< CONFIG_BTREE=y

Re: 2.6.39-rc5-git2 boot crashs

[H. Peter Anvin]

On 05/03/2011 02:45 PM, Linus Torvalds wrote:
> On Tue, May 3, 2011 at 1:50 PM, Ingo Molnar <mingo@elte.hu> wrote:
>>
>> the ELAN .config option influences the following details:
>>
>>  - sets X86_L1_CACHE_SHIFT to 4 (16 bytes) instead of the typical 6 (64 bytes)
>>  - sets X86_ALIGNMENT_16
>>  - sets the -march=i486 compiler flag
> 
> It also does this to the config diff:
> 
>   306,307c328,332
>   < CONFIG_X86_ALIGNMENT_16=y
>   < CONFIG_X86_MINIMUM_CPU_FAMILY=4
>   ---
>   > CONFIG_X86_USE_PPRO_CHECKSUM=y
>   > CONFIG_X86_TSC=y
>   > CONFIG_X86_CMPXCHG64=y
>   > CONFIG_X86_CMOV=y
>   > CONFIG_X86_MINIMUM_CPU_FAMILY=5
> 
> because of all the indirect changes it causes.
> 
> Now, Werner is actually _running_ on an AMD Opteron (or whatever
> family 15 is), I think. And his kernel is SMP-enabled. And that whole
> thin looks really really iffy.
> 
> How/why do we even allow that combination of SMP and (for example)
> arch/x86/lib/atomic64_386_32.S to be picked?
> 
> I don't think he actually runs SMP, but the fact that we even allow
> that combination looks really odd/iffy. Am I missing something?
> 

We would end up in those paths before alternatives are run, but
alternatives should be run before we start the second processor.

	-hpa

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

On Tue, May 3, 2011 at 1:50 PM, Ingo Molnar <mingo@elte.hu> wrote:
>
> the ELAN .config option influences the following details:
>
>  - sets X86_L1_CACHE_SHIFT to 4 (16 bytes) instead of the typical 6 (64 bytes)
>  - sets X86_ALIGNMENT_16
>  - sets the -march=i486 compiler flag

It also does this to the config diff:

  306,307c328,332
  < CONFIG_X86_ALIGNMENT_16=y
  < CONFIG_X86_MINIMUM_CPU_FAMILY=4
  ---
  > CONFIG_X86_USE_PPRO_CHECKSUM=y
  > CONFIG_X86_TSC=y
  > CONFIG_X86_CMPXCHG64=y
  > CONFIG_X86_CMOV=y
  > CONFIG_X86_MINIMUM_CPU_FAMILY=5

because of all the indirect changes it causes.

Now, Werner is actually _running_ on an AMD Opteron (or whatever
family 15 is), I think. And his kernel is SMP-enabled. And that whole
thin looks really really iffy.

How/why do we even allow that combination of SMP and (for example)
arch/x86/lib/atomic64_386_32.S to be picked?

I don't think he actually runs SMP, but the fact that we even allow
that combination looks really odd/iffy. Am I missing something?

                        Linus

Re: 2.6.39-rc5-git2 boot crashs

[Ingo Molnar]

* H. Peter Anvin <hpa@zytor.com> wrote:

> On 05/03/2011 01:17 PM, Linus Torvalds wrote:
> > 
> > That said, I don't really see why ELAN would be so special.
> > 
> 
> ELAN used to have a nonstandard A20 enabling sequence, until someone
> found out that changes to the mainline sequence had made ELAN work as a
> side effect.
> 
> At this point, it's just a CPU selection thing, so it makes very little
> sense.

the ELAN .config option influences the following details:

 - sets X86_L1_CACHE_SHIFT to 4 (16 bytes) instead of the typical 6 (64 bytes)
 - sets X86_ALIGNMENT_16
 - sets the -march=i486 compiler flag

So in terms of the kernel image it seems to be mostly equivalent to selecting 
i486 from the CPU menu - except the X86_ALIGNMENT_16 detail (which does not 
seem to do anything substantive, AFAICS).

Thanks,

	Ingo

Re: 2.6.39-rc5-git2 boot crashs

[H. Peter Anvin]

On 05/03/2011 01:17 PM, Linus Torvalds wrote:
> 
> That said, I don't really see why ELAN would be so special.
> 

ELAN used to have a nonstandard A20 enabling sequence, until someone
found out that changes to the mainline sequence had made ELAN work as a
side effect.

At this point, it's just a CPU selection thing, so it makes very little
sense.

	-hpa

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

On Tue, May 3, 2011 at 12:08 PM, Ingo Molnar <mingo@elte.hu> wrote:
>
> I have no smart ideas straight away - just an observation: i keep testing
> CONFIG_X86_ELAN=y on real hardware, and it's enabled in about 4% of my configs:

So how often do you do more than just boot?

Because this problem doesn't happen at boot-time, the "bad IO" issue
seems to happen only after some real filesystem work (ie the "unzip a
140MB file" etc). In one of the logs, the SATA driver issue ended up
happening four hours after boot (but I think Werner could trigger it
in minutes by doing heavy FS work).

That's why I'd suspect some subtle race or other and/or memory
allocation re-use.

The subject line "boot crashs" is misleading, because that's the
unrelated logfs thing that I have a tentative patch for.

That said, I don't really see why ELAN would be so special.

Werner: can you test without X86_EXTENDED_PLATFORM, but then picking
the i486 config instead? That should approximate the ELAN
configuration pretty closely, at least in things like compiler flags..

                   Linus

Re: 2.6.39-rc5-git2 boot crashs

[Ingo Molnar]

* Linus Torvalds <torvalds@linux-foundation.org> wrote:

> > No problem with unzip / zip / moving big files etc, , so that this problem 
> > cames from X86_EXTENDED_PLATTFORM.
> 
> Ok, that is very interesting.

I have no smart ideas straight away - just an observation: i keep testing 
CONFIG_X86_ELAN=y on real hardware, and it's enabled in about 4% of my configs:

 sirius:~/linux/linux2/configs> grep -h MELAN * | sort | uniq -c
     358 # CONFIG_MELAN is not set
      15 CONFIG_MELAN=y

and i booted a few recently:

 sirius:~/linux/linux2/configs> grep -l MELAN=y *
 config-Mon_May__2_13_30_09_CEST_2011.good
 config-Mon_May__2_15_02_43_CEST_2011.good
 config-Mon_May__2_15_59_10_CEST_2011.good
 config-Mon_May__2_16_19_49_CEST_2011.good
 config-Mon_May__2_16_41_15_CEST_2011.good
 config-Mon_May__2_18_10_56_CEST_2011.good
 config-Mon_May__2_19_07_32_CEST_2011.good
 config-Mon_May__2_19_28_56_CEST_2011.good
 config-Mon_May__2_19_52_30_CEST_2011.good
 config-Mon_May__2_21_40_44_CEST_2011.good
 config-Mon_May__2_21_52_04_CEST_2011.good
 config-Mon_May__2_23_43_29_CEST_2011.good
 config-Sun_May__1_21_21_06_CEST_2011.good
 config-Sun_May__1_22_15_02_CEST_2011.good
 config-Tue_May__3_14_45_15_CEST_2011.good

(Note: CONFIG_X86_ELAN got renamed to CONFIG_MELAN recently.)

So whatever the breakage is, it's not just some 'nobody tests CONFIG_MELAN=y' 
easy breakage, but possibly something more configuration (or test) specific.

Thanks,

	Ingo

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

[-- Attachment #1: Type: text/plain, Size: 2722 bytes --]

2011/5/3 werner <w.landgraf@ru.ru>:
> Pls watch the config enclosed.
>
> IDE on , X86_EXTENDED_PLATFORM off (also X_86 elan)
>
> From the previous two suggestions, MTD on (appearently don't makes
> problems), but of MISC-FILESYSTEMS what appearently causes the error message
> during boot and perhaps also that sync don't work, I switched on the half
> and off the other half, to circle the problem.

Ok, can you try the attached patch, to see if the logfs oops goes
away. Perhaps  more importantly, does the sync problem also go away?

> No problem with unzip / zip / moving big files etc, , so that this problem
> cames from X86_EXTENDED_PLATTFORM.

Ok, that is very interesting.

> Tell me what to try out now

So at this point you have two problems, and I really would like to
just doubly verify both of them. First off, the attached patch for the
logfs oops and (hopefully) the sync hanging issue.

But secondly, I want you to double--check that whole CONFIG_X86_ELAN
thing - I'd like you to test two kernels that are otherwise totally
identical in their configurations, except one has
CONFIG_X86_EXTENDED_PLATTFORM on and CONFIG_X86_ELAN, and the other
does not.  Just to make sure that with all the changes to the config
file, that is really the _only_ difference, and that yes, that's the
one that brings up the "crash at unzip" problem.

I'm adding Ingo Molnar, Thomas Gleixner Peter Anvin to the cc, because
if this whole problem really is because of the x86 CPU configuration,
they may have better ideas than I do.

Ingo/Thomas/Peter: see the whole long and confused thread on lkml. But
it all boils down to Werner using a very full kernel config where not
only is almost everything compiled in (which showed the logfs problem
even though Werner didn't even have a logfs filesystem), but he also
had a very generic x86 kernel. Too generic.

He had CONFIG_X86_EXTENDED_PLATTFORM and CONFIG_X86_ELAN on, and that
has apparently worked for him (and a lot of other people - he does a
distribution) up until 2.6.38. But as of 2.6.39-rc1 it causes some
really odd problems under IO (his test-case is "unzip", but that's
probably fairly random). The problem seems to show up as a bogus IO
list for SATA, causing a big WARN_ON() or oops and then a dead machine
due to IO problems.

I wonder what CONFIG_X86_ELAN has to do with anything, but from all
the config testing werner has done, it really looks like that's the
smoking gun here.

Why does M686 work, but X86_ELAN causes odd problems in 2.6.39-rc?
Allocator issues? Maybe related to the lockless slub paths?

So I obviously agree that X86_ELAN is a crazy choice for a generic
kernel, but it _used_ to work, and this is a regression.

                       Linus

[-- Attachment #2: patch.diff --]
[-- Type: text/x-patch, Size: 888 bytes --]

 fs/logfs/super.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index 33435e4b14d2..ce03a182c771 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -480,10 +480,6 @@ static int logfs_read_sb(struct super_block *sb, int read_only)
 			!read_only)
 		return -EIO;
 
-	mutex_init(&super->s_dirop_mutex);
-	mutex_init(&super->s_object_alias_mutex);
-	INIT_LIST_HEAD(&super->s_freeing_list);
-
 	ret = logfs_init_rw(sb);
 	if (ret)
 		return ret;
@@ -601,6 +597,10 @@ static struct dentry *logfs_mount(struct file_system_type *type, int flags,
 	if (!super)
 		return ERR_PTR(-ENOMEM);
 
+	mutex_init(&super->s_dirop_mutex);
+	mutex_init(&super->s_object_alias_mutex);
+	INIT_LIST_HEAD(&super->s_freeing_list);
+
 	if (!devname)
 		err = logfs_get_sb_bdev(super, type, devname);
 	else if (strncmp(devname, "mtd", 3))

Re: 2.6.39-rc5-git2 boot crashs

[werner]

[-- Attachment #1: Type: text/plain, Size: 1231 bytes --]

Now I tested the config with:
Of your suggestions of today:  IDE off , X86ELAN = OFF , 
X86_EXTended_PLATFORM = OFF
Of your suggestions of yesterday: MTD off , 
MISC-FILESYSTEMS = on

in order to find out what of the last two may cause the 
error message during boot.



The (not killing) boot error message still occurs.  See 
the enclosed syslog and dmesg. Thus, probably its caused 
by MISC-FILESYSTEMS.

sync hangs. See also the enclosed syslog.  This also seems 
being caused by MISC-FILESYSTEMS (but I'm not sure if it 
didnt occur when I switched off this, soon I'll check 
this, run again the previous compilation both MTD and 
MISC-FILESYSTEMS switched off).

unzip 140 MB and 460 MB  works, thus this error seems to 
be caused by IDE, X86_ELAN or X86_EXTENDED_PLATFORM.



At this oportunity, I still add a boot error message by a 
Toshiba Osmio Laptop, booting 2.6.38.3, some ten days ago, 
for inspection.  On my own computer, nor on my neighbours 
Packard-Bell laptop, the same kernel package gave an error 
message.


Now I continue to test some time the previous compilation, 
and then I switch on IDE and compile the kernel again.


wl



3 enclosed files
---
Professional hosting for everyone - http://www.host.ru

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 61793 bytes --]

6>xor: using function: pIII_sse (7160.000 MB/sec)
print_constraints: dummy: 
NET: Registered protocol family 16
EISA bus registered
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, fe0bffff]
TOM2: 0000000240000000 aka 9216M
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0xc0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
raid6: int32x1    621 MB/s
raid6: int32x2   1089 MB/s
raid6: int32x4    710 MB/s
raid6: int32x8    601 MB/s
raid6: mmxx1     1941 MB/s
raid6: mmxx2     3351 MB/s
raid6: sse1x1    1894 MB/s
raid6: sse1x2    2902 MB/s
raid6: sse2x1    3332 MB/s
raid6: sse2x2    4250 MB/s
raid6: using algorithm sse2x2 (4250 MB/s)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xff77ffff] (ignored)
pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20: [io  0x0600-0x063f]
pci 0000:00:01.1: reg 24: [io  0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xdfdff000-0xdfdfffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xdfdfec00-0xdfdfecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
pci 0000:00:05.0: reg 10: [mem 0xdfdf8000-0xdfdfbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
pci 0000:00:08.0: reg 10: [io  0xd480-0xd487]
pci 0000:00:08.0: reg 14: [io  0xd400-0xd403]
pci 0000:00:08.0: reg 18: [io  0xd080-0xd087]
pci 0000:00:08.0: reg 1c: [io  0xd000-0xd003]
pci 0000:00:08.0: reg 20: [io  0xcc00-0xcc0f]
pci 0000:00:08.0: reg 24: [mem 0xdfdfd000-0xdfdfdfff]
pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: [10de:03d1] type 0 class 0x000300
pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff]
pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:0d.0: reg 30: [mem 0xdfdc0000-0xdfddffff pref]
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:07.0: [10ec:8139] type 0 class 0x000200
pci 0000:01:07.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:01:07.0: reg 14: [mem 0xdfeffc00-0xdfeffcff]
pci 0000:01:07.0: supports D1 D2
pci 0000:01:07.0: PME# supported from D1 D2 D3hot
pci 0000:01:07.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:04.0:   bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:04.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: [1969:1048] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [mem 0xdffc0000-0xdfffffff 64bit]
pci 0000:04:00.0: reg 30: [mem 0xdffa0000-0xdffbffff pref]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:0c.0:   bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 00000000affc0000 - 00000000afffffff 
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
NET: Registered protocol family 8
NET: Registered protocol family 20
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xb0000000-0xff77ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io  0x0000-0x000f]
pnp 00:01: [io  0x0081-0x0083]
pnp 00:01: [io  0x0087]
pnp 00:01: [io  0x0089-0x008b]
pnp 00:01: [io  0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x03f0-0x03f5]
pnp 00:05: [io  0x03f7]
pnp 00:05: [irq 6]
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:06: [io  0x0378-0x037f]
pnp 00:06: [io  0x0778-0x077f]
pnp 00:06: [irq 7]
pnp 00:06: [dma 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: [mem 0x000d0000-0x000d3fff window]
pnp 00:07: [mem 0x000d4000-0x000d7fff window]
pnp 00:07: [mem 0x000de000-0x000dffff window]
pnp 00:07: [io  0x0010-0x001f]
pnp 00:07: [io  0x0022-0x003f]
pnp 00:07: [io  0x0044-0x004d]
pnp 00:07: [io  0x0050-0x005f]
pnp 00:07: [io  0x0062-0x0063]
pnp 00:07: [io  0x0065-0x006f]
pnp 00:07: [io  0x0072-0x007f]
pnp 00:07: [io  0x0080]
pnp 00:07: [io  0x0084-0x0086]
pnp 00:07: [io  0x0088]
pnp 00:07: [io  0x008c-0x008e]
pnp 00:07: [io  0x0090-0x009f]
pnp 00:07: [io  0x00a2-0x00bf]
pnp 00:07: [io  0x00e0-0x00ef]
pnp 00:07: [io  0x04d0-0x04d1]
pnp 00:07: [io  0x0800-0x080f]
pnp 00:07: [io  0x0500-0x057f]
pnp 00:07: [io  0x0580-0x05ff]
pnp 00:07: [io  0x0800-0x087f]
pnp 00:07: [io  0x0880-0x08ff]
pnp 00:07: [io  0x0d00-0x0d7f]
pnp 00:07: [io  0x0d80-0x0dff]
pnp 00:07: [io  0x2000-0x207f]
pnp 00:07: [io  0x2080-0x20ff]
pnp 00:07: [mem 0xfefe0000-0xfefe01ff]
pnp 00:07: [mem 0xfefe1000-0xfefe1fff]
pnp 00:07: [mem 0xfee01000-0xfeefffff]
pnp 00:07: [mem 0xffb80000-0xffffffff]
pnp 00:07: [mem 0xff300000-0xff3fffff]
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x0800-0x080f] has been reserved
system 00:07: [io  0x0500-0x057f] has been reserved
system 00:07: [io  0x0580-0x05ff] has been reserved
system 00:07: [io  0x0800-0x087f] could not be reserved
system 00:07: [io  0x0880-0x08ff] has been reserved
system 00:07: [io  0x0d00-0x0d7f] has been reserved
system 00:07: [io  0x0d80-0x0dff] has been reserved
system 00:07: [io  0x2000-0x207f] has been reserved
system 00:07: [io  0x2080-0x20ff] has been reserved
system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:07: [mem 0xffb80000-0xffffffff] has been reserved
system 00:07: [mem 0xff300000-0xff3fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed00fff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: [mem 0xb0000000-0xbfffffff]
system 00:09: [mem 0xfec00000-0xfec00fff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xb0000000-0xbfffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0c: [io  0x0000-0xffffffff disabled]
pnp 00:0c: [io  0x0230-0x023f]
pnp 00:0c: [io  0x0290-0x029f]
pnp 00:0c: [io  0x0a00-0x0a0f]
pnp 00:0c: [io  0x0a10-0x0a1f]
system 00:0c: [io  0x0230-0x023f] has been reserved
system 00:0c: [io  0x0290-0x029f] has been reserved
system 00:0c: [io  0x0a00-0x0a0f] has been reserved
system 00:0c: [io  0x0a10-0x0a1f] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [io  0x03f8-0x03ff]
pnp 00:0d: [irq 4]
pnp 00:0d: [dma 0 disabled]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0e: [mem 0xe0000000-0xefffffff]
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x000c0000-0x000cffff]
pnp 00:0f: [mem 0x000e0000-0x000fffff]
pnp 00:0f: [mem 0x00100000-0xafffffff]
pnp 00:0f: [mem 0xff780000-0xffffffff]
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0xafffffff] could not be reserved
system 00:0f: [mem 0xff780000-0xffffffff] could not be reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
mdacon: MDA with 8K of memory detected.
Console: switching consoles 13-16 to MDA-2
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:04.0:   bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0:   bridge window [io  disabled]
pci 0000:00:09.0:   bridge window [mem disabled]
pci 0000:00:09.0:   bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0:   bridge window [io  disabled]
pci 0000:00:0b.0:   bridge window [mem disabled]
pci 0000:00:0b.0:   bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0:   bridge window [io  disabled]
pci 0000:00:0c.0:   bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:0c.0:   bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0xc0000000-0xffffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 1 [mem 0xdff00000-0xdfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
PCI: CLS 64 bytes, default 64
Machine check injector initialized
cpufreq-nforce2: No nForce2 chipset.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
microcode: CPU0: family 15 not supported
The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.
scx200: NatSemi SCx200 Driver
audit: initializing netlink socket (disabled)
type=2000 audit(1304369307.828:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built May  2 2011 19:12:11) installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
NTFS driver 2.1.30 [Flags: R/W].
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
ROMFS MTD (C) 2007 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
fuse init (API version 7.16)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
NILFS version 2 loaded
BeFS version: 0.9.3
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
Btrfs loaded
GFS2 (built May  2 2011 19:13:29) installed
ceph: loaded (mds proto 32)
msgmni has been set to 1683
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
Console: switching consoles 13-16 to MDA-2
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
nvidiafb 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 11 (level, low) -> IRQ 11
nvidiafb: Device ID: 10de03d1 
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog not found
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
fbcon: NV3d (fb0) is primary device
Console: switching to colour frame buffer device 210x65
nvidiafb: PCI nVidia NV3d framebuffer (64MB @ 0xC0000000)
VIA Graphics Integration Chipset framebuffer 2.4 initializing
vmlfb: initializing
Could not find Carillo Ranch MCH device.
no IO addresses supplied
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
vesafb: cannot reserve video memory at 0xc0000000
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:d2a0
vesafb: pmi: set display start = c00cd2d6, set palette = c00cd340
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xc0000000, mapped to 0xfd680000, using 3072k, total 262144k
fb1: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (c0000000 10000000) vs hw (a0000 10000)
fb2: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
toshiba: not a supported Toshiba laptop
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
IT8712 SuperIO detected.
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
lp0: console ready
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
MM: desc_per_page = 128
nbd: registered device at major 43
usbcore: registered new interface driver ub
drbd: initialized. Version: 8.3.10 (api:88/proto:86-96)
drbd: built-in
drbd: registered as block device major 147
drbd: minor_table @ 0xf55a5180
rbd: loaded rbd (rados block device)
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
Phantom Linux Driver, version n0.9.8, init OK
i2c-core: driver [isl29003] using legacy suspend method
i2c-core: driver [isl29003] using legacy resume method
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
c2port c2port0: C2 port uc added
c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
Driver for timberdale has been successfully registered.
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fnic: Cisco FCoE HBA Driver, ver 1.5.0.1
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.1 (Mar 17, 2011)
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-7[28000]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.07.00
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.22
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.3
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.05.34-rc1 Thu. Feb. 24 17:00:00 PDT 2011
mpt2sas version 08.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ppa: Version 2.07 (for Linux 2.4.x)
imm: Version 2.05 (for Linux 2.4.0)
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
VMware PVSCSI driver - version 1.0.1.0-k
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
SCSI Media Changer driver v0.25 
osd: LOADED open-osd 0.2.0
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata1: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 15
ata2: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 15
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Fixed MDIO Bus: probed
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
NET3 PLIP version 2.4-parport gniibe@mri.co.jp
plip0: Parallel port at 0x378, using IRQ 7.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011)
D-Link DE-620 pocket adapter io 0x378, which is busy.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
DE600: port 0x378 busy
atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@scyld.com>
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.18
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.18
Fusion MPT FC Host driver 3.04.18
Fusion MPT SAS Host driver 3.04.18
Fusion MPT misc device (ioctl) driver 3.04.18
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.18
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
aoe: AoE v47 initialised.
paride: aten registered as protocol 0
paride: bpck registered as protocol 1
paride: comm registered as protocol 2
paride: dstr registered as protocol 3
paride: k951 registered as protocol 4
paride: k971 registered as protocol 5
paride: epat registered as protocol 6
paride: epia registered as protocol 7
paride: frpw registered as protocol 8
paride: friq registered as protocol 9
paride: fit2 registered as protocol 10
paride: fit3 registered as protocol 11
paride: on20 registered as protocol 12
paride: on26 registered as protocol 13
paride: ktti registered as protocol 14
bpck6: BACKPACK Protocol Driver V2.0.2
bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA
paride: bpck6 registered as protocol 15
pd: pd version 1.05, major 45, cluster 64, nice 0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SAMSUNG HD203WI, 1AN10002, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD203WI  1AN1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
 sda: sda1 sda2 sda3 sda4
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max UDMA/100
sd 2:0:0:0: [sda] Attached SCSI disk
ata2.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H66N  CB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pt: pt version 1.04, major 96
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ata4: port disabled. ignoring.
pt0: Autoprobe failed
pt: No ATAPI tape drive detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
usbcore: registered new interface driver hwa-rc
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 10, io mem 0xdfdfec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.39-rc5-git4-i486-1sys ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 11, io mem 0xdfdff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.39-rc5-git4-i486-1sys ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
usbcore: registered new interface driver hwa-hc
usbcore: registered new interface driver wusb-cbaf
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usbtmc
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
parport0: cannot grant exclusive access for device parkbd
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
inport.c: Didn't find InPort mouse at 0x23c
logibm.c: Didn't find Logitech busmouse at 0x23c
usbcore: registered new interface driver usb_acecad
acecad: v3.2:USB Acecad Flair tablet driver
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006
usbcore: registered new interface driver hanwang
usbcore: registered new interface driver kbtab
kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
mk712: device not present
usbcore: registered new interface driver usbtouchscreen
apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
usbcore: registered new interface driver ati_remote
ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
usbcore: registered new interface driver ati_remote2
ati_remote2: ATI/Philips USB RF remote driver 0.3
cm109: Keymap for Komunikate KIP1000 phone loaded
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usbcore: registered new interface driver keyspan_remote
input: PC Speaker as /devices/platform/pcspkr/input/input3
usbcore: registered new interface driver powermate
wistron_btns: System unknown
usbcore: registered new interface driver yealink
yealink: yld-20051230:Yealink phone driver
i2c /dev entries driver
Linux media interface: v0.10
lirc_dev: IR Remote Control driver registered, major 241 
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EDAC MC: Ver: 2.1.0 May  2 2011
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
ioatdma: Intel(R) QuickData Technology Driver 4.00
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.
usbcore: registered new interface driver ushc
No iBFT detected.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
XGIfb: Options (null)
asus_wmi: Asus Management GUID not found
asus_wmi: Management GUID not found
asus_wmi: Management GUID not found
msi_laptop: driver 0.5 successfully loaded.
compal-laptop: Motherboard not recognized (You could try the module's force-parameter)
dell-wmi: No known WMI GUID found
dell_wmi_aio: No known WMI GUID found
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: No or unsupported WMI interface, unable to load
acerhdf: Acer Aspire One Fan driver, v.0.5.24
acerhdf: unknown (unsupported) BIOS version System manufacturer/System Product Name/0413   , please report, aborting!
hp_accel: driver loaded
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
fujitsu-laptop: driver 0.6.0 successfully loaded.
This machine doesn't have MSI-hotkeys through WMI
Topstar Laptop ACPI extras driver loaded
oprofile: using NMI timer interrupt.
IPv4 over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 33
lec:lane_module_init: lec.c: May  2 2011 20:18:19 initialized
mpoa:atm_mpoa_init: mpc.c: May  2 2011 20:18:17 initialized
sctp: Hash tables configured (established 65536 bind 65536)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (1 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
Using IPI No-Shortcut mode
psmouse serio1: ID: 10 00 64
usb 2-3: new low speed USB device number 2 using ohci_hcd
usb 2-3: device descriptor read/64, error -62
usb 2-3: device descriptor read/64, error -62
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
kAFS: Red Hat AFS client v0.1 registering.
FS-Cache: Netfs 'afs' registered for caching
raid6test: testing the 4-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(P)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(Q)  OK
usb 2-3: new low speed USB device number 3 using ohci_hcd
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(P)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(Q)  OK
raid6test: test_disks(2, 3): faila=  2(P)  failb=  3(Q)  OK
raid6test: testing the 5-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(D)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(P)  OK
raid6test: test_disks(0, 4): faila=  0(D)  failb=  4(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(D)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(P)  OK
raid6test: test_disks(1, 4): faila=  1(D)  failb=  4(Q)  OK
raid6test: test_disks(2, 3): faila=  2(D)  failb=  3(P)  OK
raid6test: test_disks(2, 4): faila=  2(D)  failb=  4(Q)  OK
raid6test: test_disks(3, 4): faila=  3(P)  failb=  4(Q)  OK
raid6test: testing the 11-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(D)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(D)  OK
raid6test: test_disks(0, 4): faila=  0(D)  failb=  4(D)  OK
raid6test: test_disks(0, 5): faila=  0(D)  failb=  5(D)  OK
raid6test: test_disks(0, 6): faila=  0(D)  failb=  6(D)  OK
raid6test: test_disks(0, 7): faila=  0(D)  failb=  7(D)  OK
raid6test: test_disks(0, 8): faila=  0(D)  failb=  8(D)  OK
raid6test: test_disks(0, 9): faila=  0(D)  failb=  9(P)  OK
raid6test: test_disks(0, 10): faila=  0(D)  failb= 10(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(D)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(D)  OK
raid6test: test_disks(1, 4): faila=  1(D)  failb=  4(D)  OK
raid6test: test_disks(1, 5): faila=  1(D)  failb=  5(D)  OK
raid6test: test_disks(1, 6): faila=  1(D)  failb=  6(D)  OK
raid6test: test_disks(1, 7): faila=  1(D)  failb=  7(D)  OK
raid6test: test_disks(1, 8): faila=  1(D)  failb=  8(D)  OK
raid6test: test_disks(1, 9): faila=  1(D)  failb=  9(P)  OK
raid6test: test_disks(1, 10): faila=  1(D)  failb= 10(Q)  OK
raid6test: test_disks(2, 3): faila=  2(D)  failb=  3(D)  OK
raid6test: test_disks(2, 4): faila=  2(D)  failb=  4(D)  OK
raid6test: test_disks(2, 5): faila=  2(D)  failb=  5(D)  OK
raid6test: test_disks(2, 6): faila=  2(D)  failb=  6(D)  OK
raid6test: test_disks(2, 7): faila=  2(D)  failb=  7(D)  OK
raid6test: test_disks(2, 8): faila=  2(D)  failb=  8(D)  OK
raid6test: test_disks(2, 9): faila=  2(D)  failb=  9(P)  OK
raid6test: test_disks(2, 10): faila=  2(D)  failb= 10(Q)  OK
raid6test: test_disks(3, 4): faila=  3(D)  failb=  4(D)  OK
raid6test: test_disks(3, 5): faila=  3(D)  failb=  5(D)  OK
raid6test: test_disks(3, 6): faila=  3(D)  failb=  6(D)  OK
raid6test: test_disks(3, 7): faila=  3(D)  failb=  7(D)  OK
raid6test: test_disks(3, 8): faila=  3(D)  failb=  8(D)  OK
raid6test: test_disks(3, 9): faila=  3(D)  failb=  9(P)  OK
raid6test: test_disks(3, 10): faila=  3(D)  failb= 10(Q)  OK
raid6test: test_disks(4, 5): faila=  4(D)  failb=  5(D)  OK
raid6test: test_disks(4, 6): faila=  4(D)  failb=  6(D)  OK
raid6test: test_disks(4, 7): faila=  4(D)  failb=  7(D)  OK
raid6test: test_disks(4, 8): faila=  4(D)  failb=  8(D)  OK
raid6test: test_disks(4, 9): faila=  4(D)  failb=  9(P)  OK
raid6test: test_disks(4, 10): faila=  4(D)  failb= 10(Q)  OK
raid6test: test_disks(5, 6): faila=  5(D)  failb=  6(D)  OK
raid6test: test_disks(5, 7): faila=  5(D)  failb=  7(D)  OK
raid6test: test_disks(5, 8): faila=  5(D)  failb=  8(D)  OK
raid6test: test_disks(5, 9): faila=  5(D)  failb=  9(P)  OK
raid6test: test_disks(5, 10): faila=  5(D)  failb= 10(Q)  OK
raid6test: test_disks(6, 7): faila=  6(D)  failb=  7(D)  OK
raid6test: test_disks(6, 8): faila=  6(D)  failb=  8(D)  OK
raid6test: test_disks(6, 9): faila=  6(D)  failb=  9(P)  OK
raid6test: test_disks(6, 10): faila=  6(D)  failb= 10(Q)  OK
raid6test: test_disks(7, 8): faila=  7(D)  failb=  8(D)  OK
raid6test: test_disks(7, 9): faila=  7(D)  failb=  9(P)  OK
raid6test: test_disks(7, 10): faila=  7(D)  failb= 10(Q)  OK
raid6test: test_disks(8, 9): faila=  8(D)  failb=  9(P)  OK
raid6test: test_disks(8, 10): faila=  8(D)  failb= 10(Q)  OK
raid6test: test_disks(9, 10): faila=  9(P)  failb= 10(Q)  OK
raid6test: testing the 12-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(D)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(D)  OK
raid6test: test_disks(0, 4): faila=  0(D)  failb=  4(D)  OK
raid6test: test_disks(0, 5): faila=  0(D)  failb=  5(D)  OK
raid6test: test_disks(0, 6): faila=  0(D)  failb=  6(D)  OK
raid6test: test_disks(0, 7): faila=  0(D)  failb=  7(D)  OK
raid6test: test_disks(0, 8): faila=  0(D)  failb=  8(D)  OK
raid6test: test_disks(0, 9): faila=  0(D)  failb=  9(D)  OK
raid6test: test_disks(0, 10): faila=  0(D)  failb= 10(P)  OK
raid6test: test_disks(0, 11): faila=  0(D)  failb= 11(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(D)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(D)  OK
raid6test: test_disks(1, 4): faila=  1(D)  failb=  4(D)  OK
raid6test: test_disks(1, 5): faila=  1(D)  failb=  5(D)  OK
raid6test: test_disks(1, 6): faila=  1(D)  failb=  6(D)  OK
raid6test: test_disks(1, 7): faila=  1(D)  failb=  7(D)  OK
raid6test: test_disks(1, 8): faila=  1(D)  failb=  8(D)  OK
raid6test: test_disks(1, 9): faila=  1(D)  failb=  9(D)  OK
raid6test: test_disks(1, 10): faila=  1(D)  failb= 10(P)  OK
raid6test: test_disks(1, 11): faila=  1(D)  failb= 11(Q)  OK
raid6test: test_disks(2, 3): faila=  2(D)  failb=  3(D)  OK
raid6test: test_disks(2, 4): faila=  2(D)  failb=  4(D)  OK
raid6test: test_disks(2, 5): faila=  2(D)  failb=  5(D)  OK
raid6test: test_disks(2, 6): faila=  2(D)  failb=  6(D)  OK
raid6test: test_disks(2, 7): faila=  2(D)  failb=  7(D)  OK
raid6test: test_disks(2, 8): faila=  2(D)  failb=  8(D)  OK
raid6test: test_disks(2, 9): faila=  2(D)  failb=  9(D)  OK
raid6test: test_disks(2, 10): faila=  2(D)  failb= 10(P)  OK
raid6test: test_disks(2, 11): faila=  2(D)  failb= 11(Q)  OK
raid6test: test_disks(3, 4): faila=  3(D)  failb=  4(D)  OK
raid6test: test_disks(3, 5): faila=  3(D)  failb=  5(D)  OK
raid6test: test_disks(3, 6): faila=  3(D)  failb=  6(D)  OK
raid6test: test_disks(3, 7): faila=  3(D)  failb=  7(D)  OK
raid6test: test_disks(3, 8): faila=  3(D)  failb=  8(D)  OK
raid6test: test_disks(3, 9): faila=  3(D)  failb=  9(D)  OK
raid6test: test_disks(3, 10): faila=  3(D)  failb= 10(P)  OK
raid6test: test_disks(3, 11): faila=  3(D)  failb= 11(Q)  OK
raid6test: test_disks(4, 5): faila=  4(D)  failb=  5(D)  OK
raid6test: test_disks(4, 6): faila=  4(D)  failb=  6(D)  OK
raid6test: test_disks(4, 7): faila=  4(D)  failb=  7(D)  OK
raid6test: test_disks(4, 8): faila=  4(D)  failb=  8(D)  OK
raid6test: test_disks(4, 9): faila=  4(D)  failb=  9(D)  OK
raid6test: test_disks(4, 10): faila=  4(D)  failb= 10(P)  OK
raid6test: test_disks(4, 11): faila=  4(D)  failb= 11(Q)  OK
raid6test: test_disks(5, 6): faila=  5(D)  failb=  6(D)  OK
raid6test: test_disks(5, 7): faila=  5(D)  failb=  7(D)  OK
raid6test: test_disks(5, 8): faila=  5(D)  failb=  8(D)  OK
raid6test: test_disks(5, 9): faila=  5(D)  failb=  9(D)  OK
raid6test: test_disks(5, 10): faila=  5(D)  failb= 10(P)  OK
raid6test: test_disks(5, 11): faila=  5(D)  failb= 11(Q)  OK
raid6test: test_disks(6, 7): faila=  6(D)  failb=  7(D)  OK
raid6test: test_disks(6, 8): faila=  6(D)  failb=  8(D)  OK
raid6test: test_disks(6, 9): faila=  6(D)  failb=  9(D)  OK
raid6test: test_disks(6, 10): faila=  6(D)  failb= 10(P)  OK
raid6test: test_disks(6, 11): faila=  6(D)  failb= 11(Q)  OK
raid6test: test_disks(7, 8): faila=  7(D)  failb=  8(D)  OK
raid6test: test_disks(7, 9): faila=  7(D)  failb=  9(D)  OK
raid6test: test_disks(7, 10): faila=  7(D)  failb= 10(P)  OK
raid6test: test_disks(7, 11): faila=  7(D)  failb= 11(Q)  OK
raid6test: test_disks(8, 9): faila=  8(D)  failb=  9(D)  OK
raid6test: test_disks(8, 10): faila=  8(D)  failb= 10(P)  OK
raid6test: test_disks(8, 11): faila=  8(D)  failb= 11(Q)  OK
raid6test: test_disks(9, 10): faila=  9(D)  failb= 10(P)  OK
raid6test: test_disks(9, 11): faila=  9(D)  failb= 11(Q)  OK
raid6test: test_disks(10, 11): faila= 10(P)  failb= 11(Q)  OK
raid6test: testing the 16-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(D)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(D)  OK
raid6test: test_disks(0, 4): faila=  0(D)  failb=  4(D)  OK
raid6test: test_disks(0, 5): faila=  0(D)  failb=  5(D)  OK
raid6test: test_disks(0, 6): faila=  0(D)  failb=  6(D)  OK
raid6test: test_disks(0, 7): faila=  0(D)  failb=  7(D)  OK
raid6test: test_disks(0, 8): faila=  0(D)  failb=  8(D)  OK
raid6test: test_disks(0, 9): faila=  0(D)  failb=  9(D)  OK
raid6test: test_disks(0, 10): faila=  0(D)  failb= 10(D)  OK
raid6test: test_disks(0, 11): faila=  0(D)  failb= 11(D)  OK
raid6test: test_disks(0, 12): faila=  0(D)  failb= 12(D)  OK
raid6test: test_disks(0, 13): faila=  0(D)  failb= 13(D)  OK
raid6test: test_disks(0, 14): faila=  0(D)  failb= 14(P)  OK
raid6test: test_disks(0, 15): faila=  0(D)  failb= 15(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(D)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(D)  OK
raid6test: test_disks(1, 4): faila=  1(D)  failb=  4(D)  OK
raid6test: test_disks(1, 5): faila=  1(D)  failb=  5(D)  OK
raid6test: test_disks(1, 6): faila=  1(D)  failb=  6(D)  OK
raid6test: test_disks(1, 7): faila=  1(D)  failb=  7(D)  OK
raid6test: test_disks(1, 8): faila=  1(D)  failb=  8(D)  OK
raid6test: test_disks(1, 9): faila=  1(D)  failb=  9(D)  OK
raid6test: test_disks(1, 10): faila=  1(D)  failb= 10(D)  OK
raid6test: test_disks(1, 11): faila=  1(D)  failb= 11(D)  OK
raid6test: test_disks(1, 12): faila=  1(D)  failb= 12(D)  OK
raid6test: test_disks(1, 13): faila=  1(D)  failb= 13(D)  OK
raid6test: test_disks(1, 14): faila=  1(D)  failb= 14(P)  OK
raid6test: test_disks(1, 15): faila=  1(D)  failb= 15(Q)  OK
raid6test: test_disks(2, 3): faila=  2(D)  failb=  3(D)  OK
raid6test: test_disks(2, 4): faila=  2(D)  failb=  4(D)  OK
raid6test: test_disks(2, 5): faila=  2(D)  failb=  5(D)  OK
raid6test: test_disks(2, 6): faila=  2(D)  failb=  6(D)  OK
raid6test: test_disks(2, 7): faila=  2(D)  failb=  7(D)  OK
raid6test: test_disks(2, 8): faila=  2(D)  failb=  8(D)  OK
raid6test: test_disks(2, 9): faila=  2(D)  failb=  9(D)  OK
raid6test: test_disks(2, 10): faila=  2(D)  failb= 10(D)  OK
raid6test: test_disks(2, 11): faila=  2(D)  failb= 11(D)  OK
raid6test: test_disks(2, 12): faila=  2(D)  failb= 12(D)  OK
raid6test: test_disks(2, 13): faila=  2(D)  failb= 13(D)  OK
raid6test: test_disks(2, 14): faila=  2(D)  failb= 14(P)  OK
raid6test: test_disks(2, 15): faila=  2(D)  failb= 15(Q)  OK
raid6test: test_disks(3, 4): faila=  3(D)  failb=  4(D)  OK
raid6test: test_disks(3, 5): faila=  3(D)  failb=  5(D)  OK
raid6test: test_disks(3, 6): faila=  3(D)  failb=  6(D)  OK
raid6test: test_disks(3, 7): faila=  3(D)  failb=  7(D)  OK
usb 2-3: device descriptor read/64, error -62
raid6test: test_disks(3, 8): faila=  3(D)  failb=  8(D)  OK
raid6test: test_disks(3, 9): faila=  3(D)  failb=  9(D)  OK
raid6test: test_disks(3, 10): faila=  3(D)  failb= 10(D)  OK
raid6test: test_disks(3, 11): faila=  3(D)  failb= 11(D)  OK
raid6test: test_disks(3, 12): faila=  3(D)  failb= 12(D)  OK
raid6test: test_disks(3, 13): faila=  3(D)  failb= 13(D)  OK
raid6test: test_disks(3, 14): faila=  3(D)  failb= 14(P)  OK
raid6test: test_disks(3, 15): faila=  3(D)  failb= 15(Q)  OK
raid6test: test_disks(4, 5): faila=  4(D)  failb=  5(D)  OK
raid6test: test_disks(4, 6): faila=  4(D)  failb=  6(D)  OK
raid6test: test_disks(4, 7): faila=  4(D)  failb=  7(D)  OK
raid6test: test_disks(4, 8): faila=  4(D)  failb=  8(D)  OK
raid6test: test_disks(4, 9): faila=  4(D)  failb=  9(D)  OK
raid6test: test_disks(4, 10): faila=  4(D)  failb= 10(D)  OK
raid6test: test_disks(4, 11): faila=  4(D)  failb= 11(D)  OK
raid6test: test_disks(4, 12): faila=  4(D)  failb= 12(D)  OK
raid6test: test_disks(4, 13): faila=  4(D)  failb= 13(D)  OK
raid6test: test_disks(4, 14): faila=  4(D)  failb= 14(P)  OK
raid6test: test_disks(4, 15): faila=  4(D)  failb= 15(Q)  OK
raid6test: test_disks(5, 6): faila=  5(D)  failb=  6(D)  OK
raid6test: test_disks(5, 7): faila=  5(D)  failb=  7(D)  OK
raid6test: test_disks(5, 8): faila=  5(D)  failb=  8(D)  OK
raid6test: test_disks(5, 9): faila=  5(D)  failb=  9(D)  OK
raid6test: test_disks(5, 10): faila=  5(D)  failb= 10(D)  OK
raid6test: test_disks(5, 11): faila=  5(D)  failb= 11(D)  OK
raid6test: test_disks(5, 12): faila=  5(D)  failb= 12(D)  OK
raid6test: test_disks(5, 13): faila=  5(D)  failb= 13(D)  OK
raid6test: test_disks(5, 14): faila=  5(D)  failb= 14(P)  OK
raid6test: test_disks(5, 15): faila=  5(D)  failb= 15(Q)  OK
raid6test: test_disks(6, 7): faila=  6(D)  failb=  7(D)  OK
raid6test: test_disks(6, 8): faila=  6(D)  failb=  8(D)  OK
raid6test: test_disks(6, 9): faila=  6(D)  failb=  9(D)  OK
raid6test: test_disks(6, 10): faila=  6(D)  failb= 10(D)  OK
raid6test: test_disks(6, 11): faila=  6(D)  failb= 11(D)  OK
raid6test: test_disks(6, 12): faila=  6(D)  failb= 12(D)  OK
raid6test: test_disks(6, 13): faila=  6(D)  failb= 13(D)  OK
raid6test: test_disks(6, 14): faila=  6(D)  failb= 14(P)  OK
raid6test: test_disks(6, 15): faila=  6(D)  failb= 15(Q)  OK
raid6test: test_disks(7, 8): faila=  7(D)  failb=  8(D)  OK
raid6test: test_disks(7, 9): faila=  7(D)  failb=  9(D)  OK
raid6test: test_disks(7, 10): faila=  7(D)  failb= 10(D)  OK
raid6test: test_disks(7, 11): faila=  7(D)  failb= 11(D)  OK
raid6test: test_disks(7, 12): faila=  7(D)  failb= 12(D)  OK
raid6test: test_disks(7, 13): faila=  7(D)  failb= 13(D)  OK
raid6test: test_disks(7, 14): faila=  7(D)  failb= 14(P)  OK
raid6test: test_disks(7, 15): faila=  7(D)  failb= 15(Q)  OK
raid6test: test_disks(8, 9): faila=  8(D)  failb=  9(D)  OK
raid6test: test_disks(8, 10): faila=  8(D)  failb= 10(D)  OK
raid6test: test_disks(8, 11): faila=  8(D)  failb= 11(D)  OK
raid6test: test_disks(8, 12): faila=  8(D)  failb= 12(D)  OK
raid6test: test_disks(8, 13): faila=  8(D)  failb= 13(D)  OK
raid6test: test_disks(8, 14): faila=  8(D)  failb= 14(P)  OK
raid6test: test_disks(8, 15): faila=  8(D)  failb= 15(Q)  OK
raid6test: test_disks(9, 10): faila=  9(D)  failb= 10(D)  OK
raid6test: test_disks(9, 11): faila=  9(D)  failb= 11(D)  OK
raid6test: test_disks(9, 12): faila=  9(D)  failb= 12(D)  OK
raid6test: test_disks(9, 13): faila=  9(D)  failb= 13(D)  OK
raid6test: test_disks(9, 14): faila=  9(D)  failb= 14(P)  OK
raid6test: test_disks(9, 15): faila=  9(D)  failb= 15(Q)  OK
raid6test: test_disks(10, 11): faila= 10(D)  failb= 11(D)  OK
raid6test: test_disks(10, 12): faila= 10(D)  failb= 12(D)  OK
raid6test: test_disks(10, 13): faila= 10(D)  failb= 13(D)  OK
raid6test: test_disks(10, 14): faila= 10(D)  failb= 14(P)  OK
raid6test: test_disks(10, 15): faila= 10(D)  failb= 15(Q)  OK
raid6test: test_disks(11, 12): faila= 11(D)  failb= 12(D)  OK
raid6test: test_disks(11, 13): faila= 11(D)  failb= 13(D)  OK
raid6test: test_disks(11, 14): faila= 11(D)  failb= 14(P)  OK
raid6test: test_disks(11, 15): faila= 11(D)  failb= 15(Q)  OK
raid6test: test_disks(12, 13): faila= 12(D)  failb= 13(D)  OK
raid6test: test_disks(12, 14): faila= 12(D)  failb= 14(P)  OK
raid6test: test_disks(12, 15): faila= 12(D)  failb= 15(Q)  OK
raid6test: test_disks(13, 14): faila= 13(D)  failb= 14(P)  OK
raid6test: test_disks(13, 15): faila= 13(D)  failb= 15(Q)  OK
raid6test: test_disks(14, 15): faila= 14(P)  failb= 15(Q)  OK
raid6test: 
raid6test: complete (257 tests, 0 failures)
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 976k freed
usb 2-3: device descriptor read/64, error -62
usb 2-3: new low speed USB device number 4 using ohci_hcd
usb 2-3: device not accepting address 4, error -62
usb 2-3: new low speed USB device number 5 using ohci_hcd
usb 2-3: device not accepting address 5, error -62
hub 2-0:1.0: unable to enumerate USB device on port 3
udevd (2797): /proc/2797/oom_adj is deprecated, please use /proc/2797/oom_score_adj instead.
i2c i2c-3: nForce2 SMBus adapter at 0x600
i2c i2c-4: nForce2 SMBus adapter at 0x700
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
atl1 0000:04:00.0: PCI INT A -> Link[LNEA] -> GSI 11 (level, low) -> IRQ 11
atl1 0000:04:00.0: setting latency timer to 64
atl1 0000:04:00.0: version 2.1.3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
8139too: 8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
8139too 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
8139too 0000:01:07.0: eth1: RealTek RTL8139 at 0xe800, 00:08:a1:6d:38:47, IRQ 11
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:05.0: setting latency timer to 64
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
udev: renamed network interface eth1 to eth0
udev: renamed network interface eth0_rename to eth1
EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
usbcore: registered new interface driver snd-usb-audio
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with ordered data mode
REISERFS warning (device sda3): sh-2021 reiserfs_fill_super: can not find reiserfs on sda3
EXT3-fs (sda3): error: can't find ext3 filesystem on dev sda3.
EXT2-fs (sda3): error: can't find an ext2 filesystem on dev sda3.
EXT4-fs (sda3): VFS: Can't find ext4 filesystem
cramfs: wrong magic
SQUASHFS error: Can't find a SQUASHFS superblock on sda3
VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda3.
FAT: invalid media value (0x75)
VFS: Can't find a valid FAT filesystem on dev sda3.
FAT: invalid media value (0x75)
VFS: Can't find a valid FAT filesystem on dev sda3.
BFS-fs: bfs_fill_super(): No BFS filesystem on sda3 (magic=458bc330)
ISOFS: Unable to identify CD-ROM format.
hfs: unable to find HFS+ superblock
hfs: can't find a HFS filesystem on dev sda3.
vxfs: WRONG superblock magic
VFS: unable to find oldfs superblock on device sda3
VFS: could not find a valid V7 on sda3.
HPFS: Bad magic ... probably not HPFS
NTFS-fs warning (device sda3): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device sda3): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device sda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device sda3): ntfs_fill_super(): Not an NTFS volume.
You didn't specify the type of your ufs filesystem

mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...

>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
ufstype=old is supported read-only
ufs_read_super: bad magic number
LogFS: Start mount 0
BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<c12bdaeb>] logfs_drop_inode+0x3c/0x68
*pde = 00000000 
Oops: 0002 [#1] SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:08.0/host2/target2:0:0/2:0:0:0/block/sda/dev
Modules linked in: snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device rt2860sta(C) uvcvideo snd_hda_codec_realtek rtc_cmos asus_atk0110 rtc_core rtc_lib snd_hda_intel tpm_tis tpm tpm_bios 8139too snd_hda_codec snd_hwdep snd_pcm snd_timer snd k8temp soundcore snd_page_alloc atl1 i2c_nforce2

Pid: 5403, comm: mount Tainted: G         C  2.6.39-rc5-git4-i486-1sys #1 System manufacturer System Product Name/M2N8-VMX
EIP: 0060:[<c12bdaeb>] EFLAGS: 00010246 CPU: 0
EIP is at logfs_drop_inode+0x3c/0x68
EAX: 00000000 EBX: f1930000 ECX: f19301f4 EDX: f19301f4
ESI: f5249000 EDI: f50e9400 EBP: f1f5de68 ESP: f1f5de60
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process mount (pid: 5403, ti=f1f5c000 task=f5d0e730 task.ti=f1f5c000)
Stack:
 c1e7ef2c f1930000 f1f5de7c c10e9f9d ffffffea f50e9400 f683b8e0 f1f5deb8
 c12c5086 00000000 00000000 c153ee38 00000000 f5249000 00000400 f5249000
 f683b8c0 00000040 0000000a 00000000 f5160480 f5160480 f1f5def0 c10d9545
Call Trace:
 [<c10e9f9d>] iput+0x5c/0x119
 [<c12c5086>] logfs_mount+0x446/0x5c1
 [<c153ee38>] ? ida_get_new_above+0x16c/0x186
 [<c10d9545>] mount_fs+0x68/0x13e
 [<c10b1727>] ? kstrdup+0x30/0x41
 [<c10ee12b>] vfs_kern_mount+0x53/0x7f
 [<c10ee1af>] do_kern_mount+0x3c/0xbb
 [<c10ee84b>] do_mount+0x61d/0x669
 [<c10ed433>] ? copy_mount_options+0xe/0xe6
 [<c10b1659>] ? memdup_user+0x34/0x4b
 [<c10b16a1>] ? strndup_user+0x31/0x42
 [<c10ee904>] sys_mount+0x6d/0x99
 [<c1e16cc4>] syscall_call+0x7/0xb
Code: 8c 01 00 00 b8 ac 98 6a c2 e8 19 8e b5 00 8b 83 f8 01 00 00 8d 8b f4 01 00 00 8b 93 f4 01 00 00 89 42 04 89 10 8b 86 54 02 00 00 
 48 04 89 83 f4 01 00 00 8d 86 54 02 00 00 89 83 f8 01 00 00 
EIP: [<c12bdaeb>] logfs_drop_inode+0x3c/0x68 SS:ESP 0068:f1f5de60
CR2: 0000000000000004
---[ end trace b1ee68fcb3898d06 ]---

[-- Attachment #3: syslog.txt --]
[-- Type: text/plain, Size: 21709 bytes --]

May  2 20:49:19 werner kernel: Malformed early option 'acpi'
May  2 20:49:19 werner kernel: ACPI: RSDP 000fb9f0 00024 (v02 ACPIAM)
May  2 20:49:19 werner kernel: ACPI: XSDT affc0100 0004C (v01 A_M_I_ OEMXSDT  01000715 MSFT 00000097)
May  2 20:49:19 werner kernel: ACPI: FACP affc0290 000F4 (v03 A_M_I_ OEMFACP  01000715 MSFT 00000097)
May  2 20:49:19 werner kernel: ACPI: DSDT affc0440 04DAE (v01  A0647 A0647000 00000000 INTL 02002026)
May  2 20:49:19 werner kernel: ACPI: FACS affce000 00040
May  2 20:49:19 werner kernel: ACPI: APIC affc0390 00070 (v01 A_M_I_ OEMAPIC  01000715 MSFT 00000097)
May  2 20:49:19 werner kernel: ACPI: MCFG affc0400 0003C (v01 A_M_I_ OEMMCFG  01000715 MSFT 00000097)
May  2 20:49:19 werner kernel: ACPI: OEMB affce040 00060 (v01 A_M_I_ AMI_OEM  01000715 MSFT 00000097)
May  2 20:49:19 werner kernel: ACPI: HPET affc51f0 00038 (v01 A_M_I_ OEMHPET0 01000715 MSFT 00000097)
May  2 20:49:19 werner kernel: Zone PFN ranges:
May  2 20:49:19 werner kernel:   DMA      0x00000010 -> 0x00001000
May  2 20:49:19 werner kernel:   Normal   0x00001000 -> 0x000377fe
May  2 20:49:19 werner kernel:   HighMem  0x000377fe -> 0x000affc0
May  2 20:49:19 werner kernel: Movable zone start PFN for each node
May  2 20:49:19 werner kernel: early_node_map[2] active PFN ranges
May  2 20:49:19 werner kernel:     0: 0x00000010 -> 0x0000009f
May  2 20:49:19 werner kernel:     0: 0x00000100 -> 0x000affc0
May  2 20:49:19 werner kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 715087
May  2 20:49:19 werner kernel: Fast TSC calibration using PIT
May  2 20:49:19 werner kernel: Detected 2410.759 MHz processor.
May  2 20:49:19 werner kernel: ACPI: setting ELCR to 0200 (from 8c00)
May  2 20:49:19 werner kernel: AMD PMU driver.
May  2 20:49:19 werner kernel: raid6: int32x1    621 MB/s
May  2 20:49:19 werner kernel: raid6: int32x2   1089 MB/s
May  2 20:49:19 werner kernel: raid6: int32x4    710 MB/s
May  2 20:49:19 werner kernel: raid6: int32x8    601 MB/s
May  2 20:49:19 werner kernel: raid6: mmxx1     1941 MB/s
May  2 20:49:19 werner kernel: raid6: mmxx2     3351 MB/s
May  2 20:49:19 werner kernel: raid6: sse1x1    1894 MB/s
May  2 20:49:19 werner kernel: raid6: sse1x2    2902 MB/s
May  2 20:49:19 werner kernel: raid6: sse2x1    3332 MB/s
May  2 20:49:19 werner kernel: raid6: sse2x2    4250 MB/s
May  2 20:49:19 werner kernel: raid6: using algorithm sse2x2 (4250 MB/s)
May  2 20:49:19 werner kernel: ACPI: Executed 1 blocks of module-level executable AML code
May  2 20:49:19 werner kernel: mdacon: MDA with 8K of memory detected.
May  2 20:49:19 werner kernel: microcode: CPU0: family 15 not supported
May  2 20:49:19 werner kernel: The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.
May  2 20:49:19 werner kernel: highmem bounce pool size: 64 pages
May  2 20:49:19 werner kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May  2 20:49:19 werner kernel: DLM (built May  2 2011 19:12:11) installed
May  2 20:49:19 werner kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/
May  2 20:49:19 werner kernel: OCFS2 User DLM kernel interface loaded
May  2 20:49:19 werner kernel: GFS2 (built May  2 2011 19:13:29) installed
May  2 20:49:19 werner kernel: acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
May  2 20:49:19 werner kernel: ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
May  2 20:49:19 werner kernel: nvidiafb: CRTC0 analog found
May  2 20:49:19 werner kernel: nvidiafb: CRTC1 analog not found
May  2 20:49:19 werner kernel: i2c i2c-0: unable to read EDID block.
May  2 20:49:19 werner last message repeated 2 times
May  2 20:49:19 werner kernel: nvidiafb: EDID found from BUS2
May  2 20:49:19 werner kernel: nvidiafb: CRTC 0 appears to have a CRT attached
May  2 20:49:19 werner kernel: nvidiafb: Using CRT on CRTC 0
May  2 20:49:19 werner kernel: Could not find Carillo Ranch MCH device.
May  2 20:49:19 werner kernel: no IO addresses supplied
May  2 20:49:19 werner kernel: hgafb: probe of hgafb.0 failed with error -22
May  2 20:49:19 werner kernel: uvesafb: failed to execute /sbin/v86d
May  2 20:49:19 werner kernel: uvesafb: make sure that the v86d helper is installed and executable
May  2 20:49:19 werner kernel: uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
May  2 20:49:19 werner kernel: uvesafb: vbe_init() failed with -22
May  2 20:49:19 werner kernel: uvesafb: probe of uvesafb.0 failed with error -22
May  2 20:49:19 werner kernel: vesafb: cannot reserve video memory at 0xc0000000
May  2 20:49:19 werner kernel: toshiba: not a supported Toshiba laptop
May  2 20:49:19 werner kernel: Compaq SMART2 Driver (v 2.6.0)
May  2 20:49:19 werner kernel: i2c-core: driver [isl29003] using legacy suspend method
May  2 20:49:19 werner kernel: i2c-core: driver [isl29003] using legacy resume method
May  2 20:49:19 werner kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
May  2 20:49:19 werner kernel: scsi: <fdomain> Detection failed (no card)
May  2 20:49:19 werner kernel: NCR53c406a: no available ports found
May  2 20:49:19 werner kernel: Emulex LightPulse Fibre Channel SCSI driver 8.3.22
May  2 20:49:19 werner kernel: Copyright(c) 2004-2009 Emulex.  All rights reserved.
May  2 20:49:19 werner kernel: Failed initialization of WD-7000 SCSI card!
May  2 20:49:19 werner kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
May  2 20:49:19 werner kernel: 3ware Storage Controller device driver for Linux v1.26.02.003.
May  2 20:49:19 werner kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
May  2 20:49:19 werner kernel: imm: Version 2.05 (for Linux 2.4.0)
May  2 20:49:19 werner kernel: ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
May  2 20:49:19 werner kernel: DE600: port 0x378 busy
May  2 20:49:19 werner kernel: paride: aten registered as protocol 0
May  2 20:49:19 werner kernel: paride: bpck registered as protocol 1
May  2 20:49:19 werner kernel: paride: comm registered as protocol 2
May  2 20:49:19 werner kernel: paride: dstr registered as protocol 3
May  2 20:49:19 werner kernel: paride: k951 registered as protocol 4
May  2 20:49:19 werner kernel: paride: k971 registered as protocol 5
May  2 20:49:19 werner kernel: paride: epat registered as protocol 6
May  2 20:49:19 werner kernel: paride: epia registered as protocol 7
May  2 20:49:19 werner kernel: paride: frpw registered as protocol 8
May  2 20:49:19 werner kernel: paride: friq registered as protocol 9
May  2 20:49:19 werner kernel: paride: fit2 registered as protocol 10
May  2 20:49:19 werner kernel: paride: fit3 registered as protocol 11
May  2 20:49:19 werner kernel: paride: on20 registered as protocol 12
May  2 20:49:19 werner kernel: paride: on26 registered as protocol 13
May  2 20:49:19 werner kernel: paride: ktti registered as protocol 14
May  2 20:49:19 werner kernel: paride: bpck6 registered as protocol 15
May  2 20:49:19 werner kernel: pd: pd version 1.05, major 45, cluster 64, nice 0
May  2 20:49:19 werner kernel: pda: Autoprobe failed
May  2 20:49:19 werner kernel: pd: no valid drive found
May  2 20:49:19 werner kernel: pcd: pcd version 1.07, major 46, nice 0
May  2 20:49:19 werner kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
May  2 20:49:19 werner kernel: pcd0: Autoprobe failed
May  2 20:49:19 werner kernel: pcd: No CD-ROM drive found
May  2 20:49:19 werner kernel: pf: pf version 1.04, major 47, cluster 64, nice 0
May  2 20:49:19 werner kernel: pf: No ATAPI disk detected
May  2 20:49:19 werner kernel: pt: pt version 1.04, major 96
May  2 20:49:19 werner kernel: pt0: Autoprobe failed
May  2 20:49:19 werner kernel: pt: No ATAPI tape drive detected
May  2 20:49:19 werner kernel: pg: pg version 1.02, major 97
May  2 20:49:19 werner kernel: pga: Autoprobe failed
May  2 20:49:19 werner kernel: pg: No ATAPI device detected
May  2 20:49:19 werner kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
May  2 20:49:19 werner kernel: ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
May  2 20:49:19 werner kernel: GTCO usb driver version: 2.00.0006
May  2 20:49:19 werner kernel: mk712: device not present
May  2 20:49:19 werner kernel: wistron_btns: System unknown
May  2 20:49:19 werner kernel: EISA: Cannot allocate resource for mainboard
May  2 20:49:19 werner kernel: Cannot allocate resource for EISA slot 1
May  2 20:49:19 werner kernel: Cannot allocate resource for EISA slot 2
May  2 20:49:19 werner kernel: Cannot allocate resource for EISA slot 3
May  2 20:49:19 werner kernel: Cannot allocate resource for EISA slot 4
May  2 20:49:19 werner kernel: Cannot allocate resource for EISA slot 5
May  2 20:49:19 werner kernel: Cannot allocate resource for EISA slot 6
May  2 20:49:19 werner kernel: Cannot allocate resource for EISA slot 7
May  2 20:49:19 werner kernel: Cannot allocate resource for EISA slot 8
May  2 20:49:19 werner kernel: asus_wmi: Management GUID not found
May  2 20:49:19 werner kernel: asus_wmi: Management GUID not found
May  2 20:49:19 werner kernel: compal-laptop: Motherboard not recognized (You could try the module's force-parameter)
May  2 20:49:19 werner kernel: dell-wmi: No known WMI GUID found
May  2 20:49:19 werner kernel: dell_wmi_aio: No known WMI GUID found
May  2 20:49:19 werner kernel: acer_wmi: No or unsupported WMI interface, unable to load
May  2 20:49:19 werner kernel: acerhdf: unknown (unsupported) BIOS version System manufacturer/System Product Name/0413   , please report, aborting!
May  2 20:49:19 werner kernel: hdaps: supported laptop not found!
May  2 20:49:19 werner kernel: hdaps: driver init failed (ret=-19)!
May  2 20:49:19 werner kernel: This machine doesn't have MSI-hotkeys through WMI
May  2 20:49:19 werner kernel: [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
May  2 20:49:19 werner kernel: powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
May  2 20:49:19 werner kernel: usb 2-3: device descriptor read/64, error -62
May  2 20:49:19 werner last message repeated 2 times
May  2 20:49:19 werner kernel: hd: no drives specified - use hd=cyl,head,sectors on kernel command line
May  2 20:49:19 werner kernel: usb 2-3: device descriptor read/64, error -62
May  2 20:49:19 werner kernel: usb 2-3: device not accepting address 4, error -62
May  2 20:49:19 werner kernel: usb 2-3: device not accepting address 5, error -62
May  2 20:49:19 werner kernel: hub 2-0:1.0: unable to enumerate USB device on port 3
May  2 20:49:19 werner kernel: udevd (2797): /proc/2797/oom_adj is deprecated, please use /proc/2797/oom_score_adj instead.
May  2 20:49:19 werner kernel: ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
May  2 20:49:19 werner kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
May  2 20:49:19 werner kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
May  2 20:49:19 werner kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
May  2 20:49:19 werner kernel: EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
May  2 20:49:19 werner kernel: rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
May  2 20:49:19 werner kernel: EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
May  2 20:49:19 werner kernel: REISERFS warning (device sda3): sh-2021 reiserfs_fill_super: can not find reiserfs on sda3
May  2 20:49:19 werner kernel: EXT2-fs (sda3): error: can't find an ext2 filesystem on dev sda3.
May  2 20:49:19 werner kernel: EXT4-fs (sda3): VFS: Can't find ext4 filesystem
May  2 20:49:19 werner kernel: cramfs: wrong magic
May  2 20:49:19 werner kernel: SQUASHFS error: Can't find a SQUASHFS superblock on sda3
May  2 20:49:19 werner kernel: VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda3.
May  2 20:49:19 werner kernel: FAT: invalid media value (0x75)
May  2 20:49:19 werner kernel: FAT: invalid media value (0x75)
May  2 20:49:19 werner kernel: BFS-fs: bfs_fill_super(): No BFS filesystem on sda3 (magic=458bc330)
May  2 20:49:19 werner kernel: ISOFS: Unable to identify CD-ROM format.
May  2 20:49:19 werner kernel: hfs: unable to find HFS+ superblock
May  2 20:49:19 werner kernel: hfs: can't find a HFS filesystem on dev sda3.
May  2 20:49:19 werner kernel: VFS: unable to find oldfs superblock on device sda3
May  2 20:49:19 werner kernel: VFS: could not find a valid V7 on sda3.
May  2 20:49:19 werner kernel: HPFS: Bad magic ... probably not HPFS
May  2 20:49:19 werner kernel: NTFS-fs warning (device sda3): is_boot_sector_ntfs(): Invalid boot sector checksum.
May  2 20:49:19 werner kernel: NTFS-fs error (device sda3): read_ntfs_boot_sector(): Primary boot sector is invalid.
May  2 20:49:19 werner kernel: NTFS-fs error (device sda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
May  2 20:49:19 werner kernel: NTFS-fs error (device sda3): ntfs_fill_super(): Not an NTFS volume.
May  2 20:49:19 werner kernel: You didn't specify the type of your ufs filesystem
May  2 20:49:19 werner kernel: 
May  2 20:49:19 werner kernel: mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
May  2 20:49:19 werner kernel: 
May  2 20:49:19 werner kernel: >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
May  2 20:49:19 werner kernel: ufs_read_super: bad magic number
May  2 20:49:19 werner kernel: BUG: unable to handle kernel NULL pointer dereference at 00000004
May  2 20:49:19 werner kernel: IP: [<c12bdaeb>] logfs_drop_inode+0x3c/0x68
May  2 20:49:19 werner kernel: *pde = 00000000 
May  2 20:49:19 werner kernel: Oops: 0002 [#1] SMP 
May  2 20:49:19 werner kernel: last sysfs file: /sys/devices/pci0000:00/0000:00:08.0/host2/target2:0:0/2:0:0:0/block/sda/dev
May  2 20:49:19 werner kernel: Modules linked in: snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device rt2860sta(C) uvcvideo snd_hda_codec_realtek rtc_cmos asus_atk0110 rtc_core rtc_lib snd_hda_intel tpm_tis tpm tpm_bios 8139too snd_hda_codec snd_hwdep snd_pcm snd_timer snd k8temp soundcore snd_page_alloc atl1 i2c_nforce2
May  2 20:49:19 werner kernel: 
May  2 20:49:19 werner kernel: Pid: 5403, comm: mount Tainted: G         C  2.6.39-rc5-git4-i486-1sys #1 System manufacturer System Product Name/M2N8-VMX
May  2 20:49:19 werner kernel: EIP: 0060:[<c12bdaeb>] EFLAGS: 00010246 CPU: 0
May  2 20:49:19 werner kernel: EIP is at logfs_drop_inode+0x3c/0x68
May  2 20:49:19 werner kernel: EAX: 00000000 EBX: f1930000 ECX: f19301f4 EDX: f19301f4
May  2 20:49:19 werner kernel: ESI: f5249000 EDI: f50e9400 EBP: f1f5de68 ESP: f1f5de60
May  2 20:49:19 werner kernel:  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
May  2 20:49:19 werner kernel: Process mount (pid: 5403, ti=f1f5c000 task=f5d0e730 task.ti=f1f5c000)
May  2 20:49:19 werner kernel: Stack:
May  2 20:49:19 werner kernel:  c1e7ef2c f1930000 f1f5de7c c10e9f9d ffffffea f50e9400 f683b8e0 f1f5deb8
May  2 20:49:19 werner kernel:  c12c5086 00000000 00000000 c153ee38 00000000 f5249000 00000400 f5249000
May  2 20:49:19 werner kernel:  f683b8c0 00000040 0000000a 00000000 f5160480 f5160480 f1f5def0 c10d9545
May  2 20:49:19 werner kernel: Call Trace:
May  2 20:49:19 werner kernel:  [<c10e9f9d>] iput+0x5c/0x119
May  2 20:49:19 werner kernel:  [<c12c5086>] logfs_mount+0x446/0x5c1
May  2 20:49:19 werner kernel:  [<c153ee38>] ? ida_get_new_above+0x16c/0x186
May  2 20:49:19 werner kernel:  [<c10d9545>] mount_fs+0x68/0x13e
May  2 20:49:19 werner kernel:  [<c10b1727>] ? kstrdup+0x30/0x41
May  2 20:49:19 werner kernel:  [<c10ee12b>] vfs_kern_mount+0x53/0x7f
May  2 20:49:19 werner kernel:  [<c10ee1af>] do_kern_mount+0x3c/0xbb
May  2 20:49:19 werner kernel:  [<c10ee84b>] do_mount+0x61d/0x669
May  2 20:49:19 werner kernel:  [<c10ed433>] ? copy_mount_options+0xe/0xe6
May  2 20:49:19 werner kernel:  [<c10b1659>] ? memdup_user+0x34/0x4b
May  2 20:49:19 werner kernel:  [<c10b16a1>] ? strndup_user+0x31/0x42
May  2 20:49:19 werner kernel:  [<c10ee904>] sys_mount+0x6d/0x99
May  2 20:49:19 werner kernel:  [<c1e16cc4>] syscall_call+0x7/0xb
May  2 20:49:19 werner kernel: Code: 8c 01 00 00 b8 ac 98 6a c2 e8 19 8e b5 00 8b 83 f8 01 00 00 8d 8b f4 01 00 00 8b 93 f4 01 00 00 89 42 04 89 10 8b 86 54 02 00 00 
May  2 20:49:19 werner kernel: EIP: [<c12bdaeb>] logfs_drop_inode+0x3c/0x68 SS:ESP 0068:f1f5de60
May  2 20:49:19 werner kernel: CR2: 0000000000000004
May  2 20:49:19 werner kernel: ---[ end trace b1ee68fcb3898d06 ]---
May  2 20:49:21 werner udevd-event[5470]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
May  2 20:49:21 werner udevd-event[5475]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
May  2 20:49:31 werner apcupsd[5448]: apcupsd FATAL ERROR in smartsetup.c at line 171 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct. 
May  2 20:49:31 werner apcupsd[5448]: apcupsd error shutdown completed
May  2 20:49:42 werner udevd[2797]: add_to_rules: unknown key 'MODALIAS' in /etc/udev/rules.d/80-eagle-usb.rules:1
May  2 20:50:02 werner kdm_greet[5845]: Can't open default user face
May  2 20:51:40 werner kernel:  f0b5df34 00000082 00000000 f575ee50 f0b5dec8 c152f655 f8004640 00000001
May  2 20:51:40 werner kernel:  f0af9880 c243c640 c243c640 f0b5dea0 f575ee50 f575efd4 f8004640 00000000
May  2 20:51:40 werner kernel:  f5822548 00000000 f0b5dec8 c152f7cf f0b5ded8 f0b5defc c10a61eb f5822548
May  2 20:51:40 werner kernel: Call Trace:
May  2 20:51:40 werner kernel:  [<c152f655>] ? blk_flush_plug_list+0xe/0x176
May  2 20:51:40 werner kernel:  [<c152f7cf>] ? blk_finish_plug+0x12/0x2d
May  2 20:51:40 werner kernel:  [<c10a61eb>] ? generic_writepages+0x42/0x4c
May  2 20:51:40 werner kernel:  [<c10a61a9>] ? write_cache_pages+0x29a/0x29a
May  2 20:51:40 werner kernel:  [<c10a6216>] ? do_writepages+0x21/0x2d
May  2 20:51:40 werner kernel:  [<c10a07c6>] ? __filemap_fdatawrite_range+0x59/0x65
May  2 20:51:40 werner kernel:  [<c1e1680d>] rwsem_down_failed_common+0x9e/0xc2
May  2 20:51:40 werner kernel:  [<c1e16855>] rwsem_down_read_failed+0x10/0x13
May  2 20:51:40 werner kernel:  [<c1e16893>] call_rwsem_down_read_failed+0x7/0xc
May  2 20:51:40 werner kernel:  [<c1e161b5>] ? down_read+0x1c/0x1f
May  2 20:51:40 werner kernel:  [<c10d8fcc>] iterate_supers+0x49/0x9d
May  2 20:51:40 werner kernel:  [<c10f67ad>] ? __sync_filesystem+0x6a/0x6a
May  2 20:51:40 werner kernel:  [<c10f67ed>] sys_sync+0x29/0x50
May  2 20:51:40 werner kernel:  [<c1e16cc4>] syscall_call+0x7/0xb
May  2 20:52:40 werner kernel:  f0b5df34 00000082 00000000 f575ee50 f0b5dec8 c152f655 f8004640 00000001
May  2 20:52:40 werner kernel:  f0af9880 c243c640 c243c640 f0b5dea0 f575ee50 f575efd4 f8004640 00000000
May  2 20:52:40 werner kernel:  f5822548 00000000 f0b5dec8 c152f7cf f0b5ded8 f0b5defc c10a61eb f5822548
May  2 20:52:40 werner kernel: Call Trace:
May  2 20:52:40 werner kernel:  [<c152f655>] ? blk_flush_plug_list+0xe/0x176
May  2 20:52:40 werner kernel:  [<c152f7cf>] ? blk_finish_plug+0x12/0x2d
May  2 20:52:40 werner kernel:  [<c10a61eb>] ? generic_writepages+0x42/0x4c
May  2 20:52:40 werner kernel:  [<c10a61a9>] ? write_cache_pages+0x29a/0x29a
May  2 20:52:40 werner kernel:  [<c10a6216>] ? do_writepages+0x21/0x2d
May  2 20:52:40 werner kernel:  [<c10a07c6>] ? __filemap_fdatawrite_range+0x59/0x65
May  2 20:52:40 werner kernel:  [<c1e1680d>] rwsem_down_failed_common+0x9e/0xc2
May  2 20:52:40 werner kernel:  [<c1e16855>] rwsem_down_read_failed+0x10/0x13
May  2 20:52:40 werner kernel:  [<c1e16893>] call_rwsem_down_read_failed+0x7/0xc
May  2 20:52:40 werner kernel:  [<c1e161b5>] ? down_read+0x1c/0x1f
May  2 20:52:40 werner kernel:  [<c10d8fcc>] iterate_supers+0x49/0x9d
May  2 20:52:40 werner kernel:  [<c10f67ad>] ? __sync_filesystem+0x6a/0x6a
May  2 20:52:40 werner kernel:  [<c10f67ed>] sys_sync+0x29/0x50
May  2 20:52:40 werner kernel:  [<c1e16cc4>] syscall_call+0x7/0xb
May  2 20:53:37 werner kernel:  f0b5df34 00000082 00000000 f575ee50 f0b5dec8 c152f655 f8004640 00000001
May  2 20:53:37 werner kernel:  f0af9880 c243c640 c243c640 f0b5dea0 f575ee50 f575efd4 f8004640 00000000
May  2 20:53:37 werner kernel:  f5822548 00000000 f0b5dec8 c152f7cf f0b5ded8 f0b5defc c10a61eb f5822548
May  2 20:53:37 werner kernel: Call Trace:
May  2 20:53:37 werner kernel:  [<c152f655>] ? blk_flush_plug_list+0xe/0x176
May  2 20:53:37 werner kernel:  [<c152f7cf>] ? blk_finish_plug+0x12/0x2d
May  2 20:53:37 werner kernel:  [<c10a61eb>] ? generic_writepages+0x42/0x4c
May  2 20:53:37 werner kernel:  [<c10a61a9>] ? write_cache_pages+0x29a/0x29a
May  2 20:53:37 werner kernel:  [<c10a6216>] ? do_writepages+0x21/0x2d
May  2 20:53:37 werner kernel:  [<c10a07c6>] ? __filemap_fdatawrite_range+0x59/0x65
May  2 20:53:37 werner kernel:  [<c1e1680d>] rwsem_down_failed_common+0x9e/0xc2
May  2 20:53:37 werner kernel:  [<c1e16855>] rwsem_down_read_failed+0x10/0x13
May  2 20:53:37 werner kernel:  [<c1e16893>] call_rwsem_down_read_failed+0x7/0xc
May  2 20:53:37 werner kernel:  [<c1e161b5>] ? down_read+0x1c/0x1f
May  2 20:53:37 werner kernel:  [<c10d8fcc>] iterate_supers+0x49/0x9d
May  2 20:53:37 werner kernel:  [<c10f67ad>] ? __sync_filesystem+0x6a/0x6a
May  2 20:53:37 werner kernel:  [<c10f67ed>] sys_sync+0x29/0x50
May  2 20:53:37 werner kernel:  [<c1e16cc4>] syscall_call+0x7/0xb

[-- Attachment #4: dmesg-osmio-26383 --]
[-- Type: application/octet-stream, Size: 61956 bytes --]

-0x007f]
pnp 00:08: disabling [io  0x0038-0x0039 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io  0x0000-0x007f]
pnp 00:08: disabling [io  0x003c-0x003d disabled] because it overlaps 0000:00:1f.6 BAR 1 [io  0x0000-0x007f]
pnp 00:08: disabling [io  0x0050-0x0053 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io  0x0000-0x007f]
pnp 00:08: disabling [io  0x0063 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io  0x0000-0x007f]
pnp 00:08: disabling [io  0x0065 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io  0x0000-0x007f]
pnp 00:08: disabling [io  0x0072-0x0077 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io  0x0000-0x007f]
system 00:08: [io  0x01e0-0x01ef] has been reserved
system 00:08: [io  0x0480-0x048f] has been reserved
system 00:08: [io  0x0680-0x06ff] has been reserved
system 00:08: [io  0xd800-0xd87f] has been reserved
system 00:08: [io  0xd880-0xd89f] has been reserved
system 00:08: [io  0xe000-0xe07f] has been reserved
system 00:08: [io  0xe080-0xe0ff] has been reserved
system 00:08: [io  0xe400-0xe47f] has been reserved
system 00:08: [io  0xe480-0xe4ff] has been reserved
system 00:08: [io  0xe800-0xe87f] has been reserved
system 00:08: [io  0xe880-0xe8ff] has been reserved
system 00:08: [io  0xec00-0xec7f] has been reserved
system 00:08: [io  0xec80-0xecff] has been reserved
system 00:08: [io  0xeeb0-0xeebf] has been reserved
system 00:08: [io  0xeec0-0xeeff] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
mdacon: MDA with 8K of memory detected.
Console: switching consoles 13-16 to MDA-2
Switching to clocksource acpi_pm
pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1d.7: BAR 0: assigned [mem 0x28000000-0x280003ff]
pci 0000:00:1d.7: BAR 0: set to [mem 0x28000000-0x280003ff] (PCI address [0x28000000-0x280003ff])
pci 0000:00:1f.5: BAR 2: assigned [mem 0x28000800-0x280009ff]
pci 0000:00:1f.5: BAR 2: set to [mem 0x28000800-0x280009ff] (PCI address [0x28000800-0x280009ff])
pci 0000:00:1f.5: BAR 0: assigned [io  0x1000-0x10ff]
pci 0000:00:1f.5: BAR 0: set to [io  0x1000-0x10ff] (PCI address [0x1000-0x10ff])
pci 0000:00:1f.5: BAR 3: assigned [mem 0x28000a00-0x28000aff]
pci 0000:00:1f.5: BAR 3: set to [mem 0x28000a00-0x28000aff] (PCI address [0x28000a00-0x28000aff])
pci 0000:00:1f.6: BAR 0: assigned [io  0x1400-0x14ff]
pci 0000:00:1f.6: BAR 0: set to [io  0x1400-0x14ff] (PCI address [0x1400-0x14ff])
pci 0000:00:1f.6: BAR 1: assigned [io  0x1800-0x187f]
pci 0000:00:1f.6: BAR 1: set to [io  0x1800-0x187f] (PCI address [0x1800-0x187f])
pci 0000:00:1f.5: BAR 1: assigned [io  0x1880-0x18bf]
pci 0000:00:1f.5: BAR 1: set to [io  0x1880-0x18bf] (PCI address [0x1880-0x18bf])
pci 0000:00:1d.0: BAR 4: assigned [io  0x18c0-0x18df]
pci 0000:00:1d.0: BAR 4: set to [io  0x18c0-0x18df] (PCI address [0x18c0-0x18df])
pci 0000:00:1d.1: BAR 4: assigned [io  0x18e0-0x18ff]
pci 0000:00:1d.1: BAR 4: set to [io  0x18e0-0x18ff] (PCI address [0x18e0-0x18ff])
pci 0000:00:1d.2: BAR 4: assigned [io  0x1c00-0x1c1f]
pci 0000:00:1d.2: BAR 4: set to [io  0x1c00-0x1c1f] (PCI address [0x1c00-0x1c1f])
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xcf000000-0xcfffffff]
pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff pref]
pci 0000:02:09.0: BAR 0: assigned [mem 0x20000000-0x23ffffff pref]
pci 0000:02:09.0: BAR 0: set to [mem 0x20000000-0x23ffffff pref] (PCI address [0x20000000-0x23ffffff])
pci 0000:02:0b.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
pci 0000:02:0b.0: BAR 16: assigned [mem 0x2c000000-0x2fffffff]
pci 0000:02:0b.2: BAR 1: assigned [mem 0xcee00000-0xcee03fff]
pci 0000:02:0b.2: BAR 1: set to [mem 0xcee00000-0xcee03fff] (PCI address [0xcee00000-0xcee03fff])
pci 0000:02:0b.3: BAR 0: assigned [mem 0xcee04000-0xcee05fff]
pci 0000:02:0b.3: BAR 0: set to [mem 0xcee04000-0xcee05fff] (PCI address [0xcee04000-0xcee05fff])
pci 0000:02:0b.0: BAR 0: assigned [mem 0xcee06000-0xcee06fff]
pci 0000:02:0b.0: BAR 0: set to [mem 0xcee06000-0xcee06fff] (PCI address [0xcee06000-0xcee06fff])
pci 0000:02:0b.2: BAR 0: assigned [mem 0xcee07000-0xcee077ff]
pci 0000:02:0b.2: BAR 0: set to [mem 0xcee07000-0xcee077ff] (PCI address [0xcee07000-0xcee077ff])
pci 0000:02:0b.0: BAR 13: assigned [io  0xc000-0xc0ff]
pci 0000:02:0b.0: BAR 14: assigned [io  0xc400-0xc4ff]
pci 0000:02:0b.4: BAR 0: assigned [mem 0xcee07800-0xcee078ff]
pci 0000:02:0b.4: BAR 0: set to [mem 0xcee07800-0xcee078ff] (PCI address [0xcee07800-0xcee078ff])
pci 0000:02:0b.4: BAR 1: assigned [mem 0xcee07900-0xcee079ff]
pci 0000:02:0b.4: BAR 1: set to [mem 0xcee07900-0xcee079ff] (PCI address [0xcee07900-0xcee079ff])
pci 0000:02:0b.4: BAR 2: assigned [mem 0xcee07a00-0xcee07aff]
pci 0000:02:0b.4: BAR 2: set to [mem 0xcee07a00-0xcee07aff] (PCI address [0xcee07a00-0xcee07aff])
pci 0000:02:0b.0: CardBus bridge to [bus 03-03]
pci 0000:02:0b.0:   bridge window [io  0xc000-0xc0ff]
pci 0000:02:0b.0:   bridge window [io  0xc400-0xc4ff]
pci 0000:02:0b.0:   bridge window [mem 0x24000000-0x27ffffff pref]
pci 0000:02:0b.0:   bridge window [mem 0x2c000000-0x2fffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-04]
pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xcee00000-0xceefffff]
pci 0000:00:1e.0:   bridge window [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:0b.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:0b.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xcf000000-0xcfffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xcee00000-0xceefffff]
pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0xc000-0xc0ff]
pci_bus 0000:03: resource 1 [io  0xc400-0xc4ff]
pci_bus 0000:03: resource 2 [mem 0x24000000-0x27ffffff pref]
pci_bus 0000:03: resource 3 [mem 0x2c000000-0x2fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
PCI: CLS 32 bytes, default 64
Simple Boot Flag at 0x7c set to 0x1
Machine check injector initialized
elanfreq: error: no Elan processor found!
cpufreq-nforce2: No nForce2 chipset.
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x17
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
scx200: NatSemi SCx200 Driver
audit: initializing netlink socket (disabled)
type=2000 audit(1302979948.433:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built Apr 15 2011 02:33:33) installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
NTFS driver 2.1.30 [Flags: R/W].
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
fuse init (API version 7.16)
JFS: nTxBlock = 3874, nTxLock = 30994
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
NILFS version 2 loaded
BeFS version: 0.9.3
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
Btrfs loaded
GFS2 (built Apr 15 2011 02:35:04) installed
ceph: loaded (mds proto 32)
msgmni has been set to 968
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
Console: switching consoles 13-16 to MDA-2
nvidiafb 0000:01:00.0: power state changed by ACPI to D0
nvidiafb 0000:01:00.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
nvidiafb 0000:01:00.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
nvidiafb: Device ID: 10de0324 
nvidiafb: CRTC0 analog not found
nvidiafb: CRTC1 analog not found
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
nvidiafb: CRTC 0 is currently programmed for DFP
nvidiafb: Using DFP on CRTC 0
nvidiafb: Panel size is 1024 x 768
nvidiafb: Panel is LVDS
nvidiafb: MTRR set to ON
fbcvt: 1024x768@60: CVT Name - .786M3-R
fbcon: NV32 (fb0) is primary device
nvidiafb: Flat panel dithering disabled
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA0000000)
VIA Graphics Intergration Chipset framebuffer 2.4 initializing
vmlfb: initializing
Could not find Carillo Ranch MCH device.
no IO addresses supplied
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
vesafb: cannot reserve video memory at 0xa0000000
vesafb: framebuffer at 0xa0000000, mapped to 0xe5c00000, using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:c240
vesafb: pmi: set display start = c00cc276, set palette = c00cc2e0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb1: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (a0000000 4000000) vs hw (a0000 10000)
fb2: VGA16 VGA frame buffer device
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:1a: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input3
ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (80 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: enabling device (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
Non-volatile memory driver v1.3
Toshiba System Management Mode driver v1.11 26/9/2001
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855PM Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
MM: desc_per_page = 128
nbd: registered device at major 43
usbcore: registered new interface driver ub
drbd: initialized. Version: 8.3.9 (api:88/proto:86-95)
drbd: built-in
drbd: registered as block device major 147
drbd: minor_table @ 0xdf601f80
rbd: loaded rbd (rados block device)
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
tifm_7xx1 0000:02:0b.3: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
tifm_7xx1 0000:02:0b.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
Phantom Linux Driver, version n0.9.8, init OK
i2c-core: driver [isl29003] using legacy suspend method
i2c-core: driver [isl29003] using legacy resume method
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
c2port c2port0: C2 port uc added
c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
Driver for timberdale has been successfully registered.
i2c-core: driver [adp5520] using legacy suspend method
i2c-core: driver [adp5520] using legacy resume method
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7
    ide1: BM-DMA at 0xbfa8-0xbfaf
Probing IDE interface ide0...
hda: TOSHIBA MK8032GAX, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-830S, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB), CHS=16383/255/63
hda: cache flushes supported
 hda: hda1
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[26400]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.05-k0
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.20
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.3
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.05.29-rc1 Tue. Dec. 7 17:00:00 PDT 2010
mpt2sas version 07.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
ppa: Version 2.07 (for Linux 2.4.x)
imm: Version 2.05 (for Linux 2.4.0)
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.2 (Nov 23, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
SCSI Media Changer driver v0.25 
osd: LOADED open-osd 0.2.0
Error: Driver 'pata_platform' is already registered, aborting...
SSFDC read-only Flash Translation layer
mtdoops: mtd device (mtddev=name/number) must be supplied
L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
device id = 2440
device id = 2480
device id = 24c0
device id = 24d0
device id = 25a1
device id = 2670
physmap-flash.0: failed to claim resource 0
SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
NetSc520 flash device: 0x100000 at 0x200000
Failed to ioremap_nocache
Failed to ioremap_nocache
scx200_docflash: NatSemi SCx200 DOCCS Flash Driver
SNAPGEAR: failed to ioremap() ROMCS1
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Possible DiskOnChip with unknown ChipID 50 found at 0xfffe0000
No recognised DiskOnChip devices found
slram: not enough parameters.
Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
pmc551: not detected
ftl_cs: FTL header not found.
Spectra MTD driver built on Apr 15 2011 @ 03:05:21
No valid DiskOnChip devices found
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 8MiB 1,8V 8-bit)
flash size: 8 MiB
page size: 512 bytes
OOB area size: 16 bytes
sector size: 8 KiB
pages number: 16384
pages per sector: 16
bus width: 8
bits in sector size: 13
bits in page size: 9
bits in OOB size: 4
flash size with OOB: 8448 KiB
page address bytes: 3
sector address bytes: 2
options: 0x62
Scanning device for bad blocks
Creating 1 MTD partitions on "NAND 8MiB 1,8V 8-bit":
0x000000000000-0x000000800000 : "NAND simulator partition 0"
ftl_cs: FTL header not found.
usbcore: registered new interface driver alauda
onenand_wait: timeout! ctrl=0x0000 intr=0x0000
OneNAND Manufacturer: Samsung (0xec)
OneNAND 16MB 1.8V 16-bit (0x04)
OneNAND version = 0x001e
Lock scheme is Continuous Lock
Scanning device for bad blocks
Creating 1 MTD partitions on "OneNAND simulator":
0x000000000000-0x000001000000 : "OneNAND simulator partition"
ftl_cs: FTL header not found.
Fixed MDIO Bus: probed
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:02:08.0: PME# disabled
e100 0000:02:08.0: eth0: addr 0xceefe000, irq 11, MAC addr 00:0e:7b:6b:67:0c
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.12 (Jan 03, 2011)
D-Link DE-620 pocket adapter not identified in the printer port
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
eth%d: D-Link DE-600 pocket adapter: not at I/O 0x378.
atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@scyld.com>
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.18
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.18
Fusion MPT FC Host driver 3.04.18
Fusion MPT SAS Host driver 3.04.18
Fusion MPT misc device (ioctl) driver 3.04.18
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.18
firewire_ohci 0000:02:0b.2: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
firewire_ohci 0000:02:0b.2: PCI INT C -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
firewire_ohci: Added fw-ohci device 0000:02:0b.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
yenta_cardbus 0000:02:0b.0: CardBus bridge found [1179:0001]
yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:0b.0: TI: mfunc 0x01aa1b02, devctl 0x64
yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x00f8, PCI irq 11
yenta_cardbus 0000:02:0b.0: Socket status: 30000086
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [io  0xc000-0xcfff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: excluding 0xc000-0xc0ff 0xc400-0xc4ff 0xcf00-0xcf3f
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [mem 0xcee00000-0xceefffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xcee00000-0xceefffff: excluding 0xcee00000-0xcee0ffff 0xceef0000-0xceefffff
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
aoe: AoE v47 initialised.
paride: aten registered as protocol 0
paride: bpck registered as protocol 1
paride: comm registered as protocol 2
paride: dstr registered as protocol 3
paride: k951 registered as protocol 4
paride: k971 registered as protocol 5
paride: epat registered as protocol 6
paride: epia registered as protocol 7
paride: frpw registered as protocol 8
paride: friq registered as protocol 9
paride: fit2 registered as protocol 10
paride: fit3 registered as protocol 11
paride: on20 registered as protocol 12
paride: on26 registered as protocol 13
paride: ktti registered as protocol 14
bpck6: BACKPACK Protocol Driver V2.0.2
bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA
paride: bpck6 registered as protocol 15
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pt: pt version 1.04, major 96
pt0: Autoprobe failed
pt: No ATAPI tape drive detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
usbcore: registered new interface driver hwa-rc
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0x28000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.3 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x000018c0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.3 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.3 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001c00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.3 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
usbcore: registered new interface driver hwa-hc
usbcore: registered new interface driver wusb-cbaf
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
parkbd: no such parport
mousedev: PS/2 mouse device common for all mice
i2c-core: driver [lm8323] using legacy suspend method
i2c-core: driver [lm8323] using legacy resume method
i2c-core: driver [max7359] using legacy suspend method
i2c-core: driver [max7359] using legacy resume method
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
inport.c: Didn't find InPort mouse at 0x23c
logibm.c: Didn't find Logitech busmouse at 0x23c
i2c-core: driver [synaptics_i2c] using legacy suspend method
i2c-core: driver [synaptics_i2c] using legacy resume method
usbcore: registered new interface driver usb_acecad
acecad: v3.2:USB Acecad Flair tablet driver
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006
usbcore: registered new interface driver hanwang
usbcore: registered new interface driver kbtab
kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
mk712: device not present
usbcore: registered new interface driver usbtouchscreen
i2c-core: driver [ad714x_captouch] using legacy suspend method
i2c-core: driver [ad714x_captouch] using legacy resume method
i2c-core: driver [adxl34x] using legacy suspend method
i2c-core: driver [adxl34x] using legacy resume method
apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
usbcore: registered new interface driver ati_remote
ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
usbcore: registered new interface driver ati_remote2
ati_remote2: ATI/Philips USB RF remote driver 0.3
cm109: Keymap for Komunikate KIP1000 phone loaded
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
usbcore: registered new interface driver keyspan_remote
input: PC Speaker as /devices/platform/pcspkr/input/input5
usbcore: registered new interface driver powermate
wistron_btns: System unknown
usbcore: registered new interface driver yealink
yealink: yld-20051230:Yealink phone driver
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 242 
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.2.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EDAC MC: Ver: 2.1.0 Apr 15 2011
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:0b.4: SDHCI controller found [104c:8034] (rev 0)
sdhci-pci 0000:02:0b.4: enabling device (0000 -> 0002)
sdhci-pci 0000:02:0b.4: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
_regulator_get: 0000:02:0b.4 supply vmmc not found, using dummy regulator
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:0b.4] using DMA
_regulator_get: 0000:02:0b.4 supply vmmc not found, using dummy regulator
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x83/0x95()
Hardware name: Qosmio E10
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1e.0/0000:02:0b.4/microamps_requested_vmmc'
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.38.3 #1
Call Trace:
 [<c111ff03>] ? sysfs_add_one+0x83/0x95
 [<c103cfc7>] ? warn_slowpath_common+0x7a/0x8f
 [<c111ff03>] ? sysfs_add_one+0x83/0x95
 [<c103d067>] ? warn_slowpath_fmt+0x33/0x35
 [<c111ff03>] ? sysfs_add_one+0x83/0x95
 [<c111f903>] ? sysfs_add_file_mode+0x4a/0x72
 [<c111f943>] ? sysfs_add_file+0x18/0x1c
 [<c111f9de>] ? sysfs_create_file+0x25/0x27
 [<c1753adb>] ? device_create_file+0x18/0x1a
 [<c165b957>] ? _regulator_get+0x224/0x3b7
 [<c107a02f>] ? request_threaded_irq+0xb9/0xe5
 [<c165bb0d>] ? regulator_get+0xf/0x11
 [<c1c39b53>] ? sdhci_add_host+0x580/0x6cb
 [<c156d3ec>] ? pci_ioremap_bar+0x5b/0x5f
 [<c1da4754>] ? sdhci_pci_probe+0x339/0x3e2
 [<c156d609>] ? local_pci_probe+0x41/0x85
 [<c156e17e>] ? pci_device_probe+0x48/0x6b
 [<c1755c6c>] ? driver_probe_device+0x9c/0x145
 [<c156d5a3>] ? pci_match_device+0x96/0x9c
 [<c1dbab2a>] ? _cond_resched+0x8/0x47
 [<c1755d5d>] ? __driver_attach+0x48/0x64
 [<c17555ad>] ? bus_for_each_dev+0x42/0x6c
 [<c1755af5>] ? driver_attach+0x1e/0x20
 [<c1755d15>] ? __driver_attach+0x0/0x64
 [<c1754fc2>] ? bus_add_driver+0xc6/0x20a
 [<c1755fef>] ? driver_register+0x98/0xf8
 [<c1755fef>] ? driver_register+0x98/0xf8
 [<c165d19a>] ? tty_register_driver+0x15e/0x1e2
 [<c156e36b>] ? __pci_register_driver+0x3d/0x96
 [<c1dba0d5>] ? printk+0x1d/0x1f
 [<c23255b7>] ? sdhci_drv_init+0x14/0x16
 [<c100117e>] ? do_one_initcall+0x8c/0x142
 [<c1079038>] ? irq_to_desc+0x8/0x1e
 [<c23255a3>] ? sdhci_drv_init+0x0/0x16
 [<c22c4380>] ? kernel_init+0x101/0x19a
 [<c22c427f>] ? kernel_init+0x0/0x19a
 [<c1003b46>] ? kernel_thread_helper+0x6/0x10
---[ end trace 120ecbe82d809816 ]---
create_regulator: dummy: could not add regulator_dev requested microamps sysfs entry
mmc1: no vmmc regulator found
firewire_core: created device fw0: GUID 000039000061e892, S400
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:02:0b.4] using DMA
_regulator_get: 0000:02:0b.4 supply vmmc not found, using dummy regulator
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x83/0x95()
Hardware name: Qosmio E10
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1e.0/0000:02:0b.4/microamps_requested_vmmc'
Modules linked in:
Pid: 1, comm: swapper Tainted: G        W   2.6.38.3 #1
Call Trace:
 [<c111ff03>] ? sysfs_add_one+0x83/0x95
 [<c103cfc7>] ? warn_slowpath_common+0x7a/0x8f
 [<c111ff03>] ? sysfs_add_one+0x83/0x95
 [<c103d067>] ? warn_slowpath_fmt+0x33/0x35
 [<c111ff03>] ? sysfs_add_one+0x83/0x95
 [<c111f903>] ? sysfs_add_file_mode+0x4a/0x72
 [<c111f943>] ? sysfs_add_file+0x18/0x1c
 [<c111f9de>] ? sysfs_create_file+0x25/0x27
 [<c1753adb>] ? device_create_file+0x18/0x1a
 [<c165b957>] ? _regulator_get+0x224/0x3b7
 [<c107a02f>] ? request_threaded_irq+0xb9/0xe5
 [<c165bb0d>] ? regulator_get+0xf/0x11
 [<c1c39b53>] ? sdhci_add_host+0x580/0x6cb
 [<c156d3ec>] ? pci_ioremap_bar+0x5b/0x5f
 [<c1da4754>] ? sdhci_pci_probe+0x339/0x3e2
 [<c156d609>] ? local_pci_probe+0x41/0x85
 [<c156e17e>] ? pci_device_probe+0x48/0x6b
 [<c1755c6c>] ? driver_probe_device+0x9c/0x145
 [<c156d5a3>] ? pci_match_device+0x96/0x9c
 [<c1dbab2a>] ? _cond_resched+0x8/0x47
 [<c1755d5d>] ? __driver_attach+0x48/0x64
 [<c17555ad>] ? bus_for_each_dev+0x42/0x6c
 [<c1755af5>] ? driver_attach+0x1e/0x20
 [<c1755d15>] ? __driver_attach+0x0/0x64
 [<c1754fc2>] ? bus_add_driver+0xc6/0x20a
 [<c1755fef>] ? driver_register+0x98/0xf8
 [<c1755fef>] ? driver_register+0x98/0xf8
 [<c165d19a>] ? tty_register_driver+0x15e/0x1e2
 [<c156e36b>] ? __pci_register_driver+0x3d/0x96
 [<c1dba0d5>] ? printk+0x1d/0x1f
 [<c23255b7>] ? sdhci_drv_init+0x14/0x16
 [<c100117e>] ? do_one_initcall+0x8c/0x142
 [<c1079038>] ? irq_to_desc+0x8/0x1e
 [<c23255a3>] ? sdhci_drv_init+0x0/0x16
 [<c22c4380>] ? kernel_init+0x101/0x19a
 [<c22c427f>] ? kernel_init+0x0/0x19a
 [<c1003b46>] ? kernel_thread_helper+0x6/0x10
---[ end trace 120ecbe82d809817 ]---
create_regulator: dummy: could not add regulator_dev requested microamps sysfs entry
mmc2: no vmmc regulator found
Registered led device: mmc2::
mmc2: SDHCI controller on PCI [0000:02:0b.4] using DMA
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.
No iBFT detected.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
XGIfb: Options (null)
dell-wmi: No known WMI GUID found
This machine doesn't have MSI-hotkeys through WMI
Topstar Laptop ACPI extras driver loaded
Detected Toshiba ACPI Bluetooth device - installing RFKill handler
toshiba_bluetooth: Re-enabling Toshiba Bluetooth
oprofile: using NMI timer interrupt.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 33
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
Using IPI No-Shortcut mode
psmouse serio1: ID: 73 02 14
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=04d9, idProduct=1603
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer:  
input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6
generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-1/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input7
generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-1/input1
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: New USB device found, idVendor=05e3, idProduct=1205
usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: Product: USB Mouse              
input: USB Mouse               as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input8
generic-usb 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:1d.1-2/input0
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
kAFS: Red Hat AFS client v0.1 registering.
FS-Cache: Netfs 'afs' registered for caching
raid6test: testing the 4-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(P)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(P)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(Q)  OK
raid6test: test_disks(2, 3): faila=  2(P)  failb=  3(Q)  OK
raid6test: testing the 5-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(D)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(P)  OK
raid6test: test_disks(0, 4): faila=  0(D)  failb=  4(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(D)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(P)  OK
raid6test: test_disks(1, 4): faila=  1(D)  failb=  4(Q)  OK
raid6test: test_disks(2, 3): faila=  2(D)  failb=  3(P)  OK
raid6test: test_disks(2, 4): faila=  2(D)  failb=  4(Q)  OK
raid6test: test_disks(3, 4): faila=  3(P)  failb=  4(Q)  OK
raid6test: testing the 11-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(D)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(D)  OK
raid6test: test_disks(0, 4): faila=  0(D)  failb=  4(D)  OK
raid6test: test_disks(0, 5): faila=  0(D)  failb=  5(D)  OK
raid6test: test_disks(0, 6): faila=  0(D)  failb=  6(D)  OK
raid6test: test_disks(0, 7): faila=  0(D)  failb=  7(D)  OK
raid6test: test_disks(0, 8): faila=  0(D)  failb=  8(D)  OK
raid6test: test_disks(0, 9): faila=  0(D)  failb=  9(P)  OK
raid6test: test_disks(0, 10): faila=  0(D)  failb= 10(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(D)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(D)  OK
raid6test: test_disks(1, 4): faila=  1(D)  failb=  4(D)  OK
raid6test: test_disks(1, 5): faila=  1(D)  failb=  5(D)  OK
raid6test: test_disks(1, 6): faila=  1(D)  failb=  6(D)  OK
raid6test: test_disks(1, 7): faila=  1(D)  failb=  7(D)  OK
raid6test: test_disks(1, 8): faila=  1(D)  failb=  8(D)  OK
raid6test: test_disks(1, 9): faila=  1(D)  failb=  9(P)  OK
raid6test: test_disks(1, 10): faila=  1(D)  failb= 10(Q)  OK
raid6test: test_disks(2, 3): faila=  2(D)  failb=  3(D)  OK
raid6test: test_disks(2, 4): faila=  2(D)  failb=  4(D)  OK
raid6test: test_disks(2, 5): faila=  2(D)  failb=  5(D)  OK
raid6test: test_disks(2, 6): faila=  2(D)  failb=  6(D)  OK
raid6test: test_disks(2, 7): faila=  2(D)  failb=  7(D)  OK
raid6test: test_disks(2, 8): faila=  2(D)  failb=  8(D)  OK
raid6test: test_disks(2, 9): faila=  2(D)  failb=  9(P)  OK
raid6test: test_disks(2, 10): faila=  2(D)  failb= 10(Q)  OK
raid6test: test_disks(3, 4): faila=  3(D)  failb=  4(D)  OK
raid6test: test_disks(3, 5): faila=  3(D)  failb=  5(D)  OK
raid6test: test_disks(3, 6): faila=  3(D)  failb=  6(D)  OK
raid6test: test_disks(3, 7): faila=  3(D)  failb=  7(D)  OK
raid6test: test_disks(3, 8): faila=  3(D)  failb=  8(D)  OK
raid6test: test_disks(3, 9): faila=  3(D)  failb=  9(P)  OK
raid6test: test_disks(3, 10): faila=  3(D)  failb= 10(Q)  OK
raid6test: test_disks(4, 5): faila=  4(D)  failb=  5(D)  OK
raid6test: test_disks(4, 6): faila=  4(D)  failb=  6(D)  OK
raid6test: test_disks(4, 7): faila=  4(D)  failb=  7(D)  OK
raid6test: test_disks(4, 8): faila=  4(D)  failb=  8(D)  OK
raid6test: test_disks(4, 9): faila=  4(D)  failb=  9(P)  OK
raid6test: test_disks(4, 10): faila=  4(D)  failb= 10(Q)  OK
raid6test: test_disks(5, 6): faila=  5(D)  failb=  6(D)  OK
raid6test: test_disks(5, 7): faila=  5(D)  failb=  7(D)  OK
raid6test: test_disks(5, 8): faila=  5(D)  failb=  8(D)  OK
raid6test: test_disks(5, 9): faila=  5(D)  failb=  9(P)  OK
raid6test: test_disks(5, 10): faila=  5(D)  failb= 10(Q)  OK
raid6test: test_disks(6, 7): faila=  6(D)  failb=  7(D)  OK
raid6test: test_disks(6, 8): faila=  6(D)  failb=  8(D)  OK
raid6test: test_disks(6, 9): faila=  6(D)  failb=  9(P)  OK
raid6test: test_disks(6, 10): faila=  6(D)  failb= 10(Q)  OK
raid6test: test_disks(7, 8): faila=  7(D)  failb=  8(D)  OK
raid6test: test_disks(7, 9): faila=  7(D)  failb=  9(P)  OK
raid6test: test_disks(7, 10): faila=  7(D)  failb= 10(Q)  OK
raid6test: test_disks(8, 9): faila=  8(D)  failb=  9(P)  OK
raid6test: test_disks(8, 10): faila=  8(D)  failb= 10(Q)  OK
raid6test: test_disks(9, 10): faila=  9(P)  failb= 10(Q)  OK
raid6test: testing the 12-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(D)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(D)  OK
raid6test: test_disks(0, 4): faila=  0(D)  failb=  4(D)  OK
raid6test: test_disks(0, 5): faila=  0(D)  failb=  5(D)  OK
raid6test: test_disks(0, 6): faila=  0(D)  failb=  6(D)  OK
raid6test: test_disks(0, 7): faila=  0(D)  failb=  7(D)  OK
raid6test: test_disks(0, 8): faila=  0(D)  failb=  8(D)  OK
raid6test: test_disks(0, 9): faila=  0(D)  failb=  9(D)  OK
raid6test: test_disks(0, 10): faila=  0(D)  failb= 10(P)  OK
raid6test: test_disks(0, 11): faila=  0(D)  failb= 11(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(D)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(D)  OK
raid6test: test_disks(1, 4): faila=  1(D)  failb=  4(D)  OK
raid6test: test_disks(1, 5): faila=  1(D)  failb=  5(D)  OK
raid6test: test_disks(1, 6): faila=  1(D)  failb=  6(D)  OK
raid6test: test_disks(1, 7): faila=  1(D)  failb=  7(D)  OK
raid6test: test_disks(1, 8): faila=  1(D)  failb=  8(D)  OK
raid6test: test_disks(1, 9): faila=  1(D)  failb=  9(D)  OK
raid6test: test_disks(1, 10): faila=  1(D)  failb= 10(P)  OK
raid6test: test_disks(1, 11): faila=  1(D)  failb= 11(Q)  OK
raid6test: test_disks(2, 3): faila=  2(D)  failb=  3(D)  OK
raid6test: test_disks(2, 4): faila=  2(D)  failb=  4(D)  OK
raid6test: test_disks(2, 5): faila=  2(D)  failb=  5(D)  OK
raid6test: test_disks(2, 6): faila=  2(D)  failb=  6(D)  OK
raid6test: test_disks(2, 7): faila=  2(D)  failb=  7(D)  OK
raid6test: test_disks(2, 8): faila=  2(D)  failb=  8(D)  OK
raid6test: test_disks(2, 9): faila=  2(D)  failb=  9(D)  OK
raid6test: test_disks(2, 10): faila=  2(D)  failb= 10(P)  OK
raid6test: test_disks(2, 11): faila=  2(D)  failb= 11(Q)  OK
raid6test: test_disks(3, 4): faila=  3(D)  failb=  4(D)  OK
raid6test: test_disks(3, 5): faila=  3(D)  failb=  5(D)  OK
raid6test: test_disks(3, 6): faila=  3(D)  failb=  6(D)  OK
raid6test: test_disks(3, 7): faila=  3(D)  failb=  7(D)  OK
raid6test: test_disks(3, 8): faila=  3(D)  failb=  8(D)  OK
raid6test: test_disks(3, 9): faila=  3(D)  failb=  9(D)  OK
raid6test: test_disks(3, 10): faila=  3(D)  failb= 10(P)  OK
raid6test: test_disks(3, 11): faila=  3(D)  failb= 11(Q)  OK
raid6test: test_disks(4, 5): faila=  4(D)  failb=  5(D)  OK
raid6test: test_disks(4, 6): faila=  4(D)  failb=  6(D)  OK
raid6test: test_disks(4, 7): faila=  4(D)  failb=  7(D)  OK
raid6test: test_disks(4, 8): faila=  4(D)  failb=  8(D)  OK
raid6test: test_disks(4, 9): faila=  4(D)  failb=  9(D)  OK
raid6test: test_disks(4, 10): faila=  4(D)  failb= 10(P)  OK
raid6test: test_disks(4, 11): faila=  4(D)  failb= 11(Q)  OK
raid6test: test_disks(5, 6): faila=  5(D)  failb=  6(D)  OK
raid6test: test_disks(5, 7): faila=  5(D)  failb=  7(D)  OK
raid6test: test_disks(5, 8): faila=  5(D)  failb=  8(D)  OK
raid6test: test_disks(5, 9): faila=  5(D)  failb=  9(D)  OK
raid6test: test_disks(5, 10): faila=  5(D)  failb= 10(P)  OK
raid6test: test_disks(5, 11): faila=  5(D)  failb= 11(Q)  OK
raid6test: test_disks(6, 7): faila=  6(D)  failb=  7(D)  OK
raid6test: test_disks(6, 8): faila=  6(D)  failb=  8(D)  OK
raid6test: test_disks(6, 9): faila=  6(D)  failb=  9(D)  OK
raid6test: test_disks(6, 10): faila=  6(D)  failb= 10(P)  OK
raid6test: test_disks(6, 11): faila=  6(D)  failb= 11(Q)  OK
raid6test: test_disks(7, 8): faila=  7(D)  failb=  8(D)  OK
raid6test: test_disks(7, 9): faila=  7(D)  failb=  9(D)  OK
raid6test: test_disks(7, 10): faila=  7(D)  failb= 10(P)  OK
raid6test: test_disks(7, 11): faila=  7(D)  failb= 11(Q)  OK
raid6test: test_disks(8, 9): faila=  8(D)  failb=  9(D)  OK
raid6test: test_disks(8, 10): faila=  8(D)  failb= 10(P)  OK
raid6test: test_disks(8, 11): faila=  8(D)  failb= 11(Q)  OK
raid6test: test_disks(9, 10): faila=  9(D)  failb= 10(P)  OK
raid6test: test_disks(9, 11): faila=  9(D)  failb= 11(Q)  OK
raid6test: test_disks(10, 11): faila= 10(P)  failb= 11(Q)  OK
raid6test: testing the 16-disk case...
raid6test: test_disks(0, 1): faila=  0(D)  failb=  1(D)  OK
raid6test: test_disks(0, 2): faila=  0(D)  failb=  2(D)  OK
raid6test: test_disks(0, 3): faila=  0(D)  failb=  3(D)  OK
raid6test: test_disks(0, 4): faila=  0(D)  failb=  4(D)  OK
raid6test: test_disks(0, 5): faila=  0(D)  failb=  5(D)  OK
raid6test: test_disks(0, 6): faila=  0(D)  failb=  6(D)  OK
raid6test: test_disks(0, 7): faila=  0(D)  failb=  7(D)  OK
raid6test: test_disks(0, 8): faila=  0(D)  failb=  8(D)  OK
raid6test: test_disks(0, 9): faila=  0(D)  failb=  9(D)  OK
raid6test: test_disks(0, 10): faila=  0(D)  failb= 10(D)  OK
raid6test: test_disks(0, 11): faila=  0(D)  failb= 11(D)  OK
raid6test: test_disks(0, 12): faila=  0(D)  failb= 12(D)  OK
raid6test: test_disks(0, 13): faila=  0(D)  failb= 13(D)  OK
raid6test: test_disks(0, 14): faila=  0(D)  failb= 14(P)  OK
raid6test: test_disks(0, 15): faila=  0(D)  failb= 15(Q)  OK
raid6test: test_disks(1, 2): faila=  1(D)  failb=  2(D)  OK
raid6test: test_disks(1, 3): faila=  1(D)  failb=  3(D)  OK
raid6test: test_disks(1, 4): faila=  1(D)  failb=  4(D)  OK
raid6test: test_disks(1, 5): faila=  1(D)  failb=  5(D)  OK
raid6test: test_disks(1, 6): faila=  1(D)  failb=  6(D)  OK
raid6test: test_disks(1, 7): faila=  1(D)  failb=  7(D)  OK
raid6test: test_disks(1, 8): faila=  1(D)  failb=  8(D)  OK
raid6test: test_disks(1, 9): faila=  1(D)  failb=  9(D)  OK
raid6test: test_disks(1, 10): faila=  1(D)  failb= 10(D)  OK
raid6test: test_disks(1, 11): faila=  1(D)  failb= 11(D)  OK
raid6test: test_disks(1, 12): faila=  1(D)  failb= 12(D)  OK
raid6test: test_disks(1, 13): faila=  1(D)  failb= 13(D)  OK
raid6test: test_disks(1, 14): faila=  1(D)  failb= 14(P)  OK
raid6test: test_disks(1, 15): faila=  1(D)  failb= 15(Q)  OK
raid6test: test_disks(2, 3): faila=  2(D)  failb=  3(D)  OK
raid6test: test_disks(2, 4): faila=  2(D)  failb=  4(D)  OK
raid6test: test_disks(2, 5): faila=  2(D)  failb=  5(D)  OK
raid6test: test_disks(2, 6): faila=  2(D)  failb=  6(D)  OK
raid6test: test_disks(2, 7): faila=  2(D)  failb=  7(D)  OK
raid6test: test_disks(2, 8): faila=  2(D)  failb=  8(D)  OK
raid6test: test_disks(2, 9): faila=  2(D)  failb=  9(D)  OK
raid6test: test_disks(2, 10): faila=  2(D)  failb= 10(D)  OK
raid6test: test_disks(2, 11): faila=  2(D)  failb= 11(D)  OK
raid6test: test_disks(2, 12): faila=  2(D)  failb= 12(D)  OK
raid6test: test_disks(2, 13): faila=  2(D)  failb= 13(D)  OK
raid6test: test_disks(2, 14): faila=  2(D)  failb= 14(P)  OK
raid6test: test_disks(2, 15): faila=  2(D)  failb= 15(Q)  OK
raid6test: test_disks(3, 4): faila=  3(D)  failb=  4(D)  OK
raid6test: test_disks(3, 5): faila=  3(D)  failb=  5(D)  OK
raid6test: test_disks(3, 6): faila=  3(D)  failb=  6(D)  OK
raid6test: test_disks(3, 7): faila=  3(D)  failb=  7(D)  OK
raid6test: test_disks(3, 8): faila=  3(D)  failb=  8(D)  OK
raid6test: test_disks(3, 9): faila=  3(D)  failb=  9(D)  OK
raid6test: test_disks(3, 10): faila=  3(D)  failb= 10(D)  OK
raid6test: test_disks(3, 11): faila=  3(D)  failb= 11(D)  OK
raid6test: test_disks(3, 12): faila=  3(D)  failb= 12(D)  OK
raid6test: test_disks(3, 13): faila=  3(D)  failb= 13(D)  OK
raid6test: test_disks(3, 14): faila=  3(D)  failb= 14(P)  OK
raid6test: test_disks(3, 15): faila=  3(D)  failb= 15(Q)  OK
raid6test: test_disks(4, 5): faila=  4(D)  failb=  5(D)  OK
raid6test: test_disks(4, 6): faila=  4(D)  failb=  6(D)  OK
raid6test: test_disks(4, 7): faila=  4(D)  failb=  7(D)  OK
raid6test: test_disks(4, 8): faila=  4(D)  failb=  8(D)  OK
raid6test: test_disks(4, 9): faila=  4(D)  failb=  9(D)  OK
raid6test: test_disks(4, 10): faila=  4(D)  failb= 10(D)  OK
raid6test: test_disks(4, 11): faila=  4(D)  failb= 11(D)  OK
raid6test: test_disks(4, 12): faila=  4(D)  failb= 12(D)  OK
raid6test: test_disks(4, 13): faila=  4(D)  failb= 13(D)  OK
raid6test: test_disks(4, 14): faila=  4(D)  failb= 14(P)  OK
raid6test: test_disks(4, 15): faila=  4(D)  failb= 15(Q)  OK
raid6test: test_disks(5, 6): faila=  5(D)  failb=  6(D)  OK
raid6test: test_disks(5, 7): faila=  5(D)  failb=  7(D)  OK
raid6test: test_disks(5, 8): faila=  5(D)  failb=  8(D)  OK
raid6test: test_disks(5, 9): faila=  5(D)  failb=  9(D)  OK
raid6test: test_disks(5, 10): faila=  5(D)  failb= 10(D)  OK
raid6test: test_disks(5, 11): faila=  5(D)  failb= 11(D)  OK
raid6test: test_disks(5, 12): faila=  5(D)  failb= 12(D)  OK
raid6test: test_disks(5, 13): faila=  5(D)  failb= 13(D)  OK
raid6test: test_disks(5, 14): faila=  5(D)  failb= 14(P)  OK
raid6test: test_disks(5, 15): faila=  5(D)  failb= 15(Q)  OK
raid6test: test_disks(6, 7): faila=  6(D)  failb=  7(D)  OK
raid6test: test_disks(6, 8): faila=  6(D)  failb=  8(D)  OK
raid6test: test_disks(6, 9): faila=  6(D)  failb=  9(D)  OK
raid6test: test_disks(6, 10): faila=  6(D)  failb= 10(D)  OK
raid6test: test_disks(6, 11): faila=  6(D)  failb= 11(D)  OK
raid6test: test_disks(6, 12): faila=  6(D)  failb= 12(D)  OK
raid6test: test_disks(6, 13): faila=  6(D)  failb= 13(D)  OK
raid6test: test_disks(6, 14): faila=  6(D)  failb= 14(P)  OK
raid6test: test_disks(6, 15): faila=  6(D)  failb= 15(Q)  OK
raid6test: test_disks(7, 8): faila=  7(D)  failb=  8(D)  OK
raid6test: test_disks(7, 9): faila=  7(D)  failb=  9(D)  OK
raid6test: test_disks(7, 10): faila=  7(D)  failb= 10(D)  OK
raid6test: test_disks(7, 11): faila=  7(D)  failb= 11(D)  OK
raid6test: test_disks(7, 12): faila=  7(D)  failb= 12(D)  OK
raid6test: test_disks(7, 13): faila=  7(D)  failb= 13(D)  OK
raid6test: test_disks(7, 14): faila=  7(D)  failb= 14(P)  OK
raid6test: test_disks(7, 15): faila=  7(D)  failb= 15(Q)  OK
raid6test: test_disks(8, 9): faila=  8(D)  failb=  9(D)  OK
raid6test: test_disks(8, 10): faila=  8(D)  failb= 10(D)  OK
raid6test: test_disks(8, 11): faila=  8(D)  failb= 11(D)  OK
raid6test: test_disks(8, 12): faila=  8(D)  failb= 12(D)  OK
raid6test: test_disks(8, 13): faila=  8(D)  failb= 13(D)  OK
raid6test: test_disks(8, 14): faila=  8(D)  failb= 14(P)  OK
raid6test: test_disks(8, 15): faila=  8(D)  failb= 15(Q)  OK
raid6test: test_disks(9, 10): faila=  9(D)  failb= 10(D)  OK
raid6test: test_disks(9, 11): faila=  9(D)  failb= 11(D)  OK
raid6test: test_disks(9, 12): faila=  9(D)  failb= 12(D)  OK
raid6test: test_disks(9, 13): faila=  9(D)  failb= 13(D)  OK
raid6test: test_disks(9, 14): faila=  9(D)  failb= 14(P)  OK
raid6test: test_disks(9, 15): faila=  9(D)  failb= 15(Q)  OK
raid6test: test_disks(10, 11): faila= 10(D)  failb= 11(D)  OK
raid6test: test_disks(10, 12): faila= 10(D)  failb= 12(D)  OK
raid6test: test_disks(10, 13): faila= 10(D)  failb= 13(D)  OK
raid6test: test_disks(10, 14): faila= 10(D)  failb= 14(P)  OK
raid6test: test_disks(10, 15): faila= 10(D)  failb= 15(Q)  OK
raid6test: test_disks(11, 12): faila= 11(D)  failb= 12(D)  OK
raid6test: test_disks(11, 13): faila= 11(D)  failb= 13(D)  OK
raid6test: test_disks(11, 14): faila= 11(D)  failb= 14(P)  OK
raid6test: test_disks(11, 15): faila= 11(D)  failb= 15(Q)  OK
raid6test: test_disks(12, 13): faila= 12(D)  failb= 13(D)  OK
raid6test: test_disks(12, 14): faila= 12(D)  failb= 14(P)  OK
raid6test: test_disks(12, 15): faila= 12(D)  failb= 15(Q)  OK
raid6test: test_disks(13, 14): faila= 13(D)  failb= 14(P)  OK
raid6test: test_disks(13, 15): faila= 13(D)  failb= 15(Q)  OK
raid6test: test_disks(14, 15): faila= 14(P)  failb= 15(Q)  OK
raid6test: 
raid6test: complete (257 tests, 0 failures)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (hda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 3:1.
devtmpfs: mounted
Freeing unused kernel memory: 916k freed
firewire_net: firewire0: IPv4 over FireWire on device 000039000061e892
firewire_core: refreshed device fw0
udevd (3479): /proc/3479/oom_adj is deprecated, please use /proc/3479/oom_score_adj instead.
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: Toshiba input device as /devices/virtual/input/input10
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
Registered led device: toshiba::illumination
usb 4-2: new full speed USB device using uhci_hcd and address 2
Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003)
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
rtc0: alarms up to one year, 114 bytes nvram
usb 4-2: New USB device found, idVendor=0930, idProduct=0505
usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ivtv: Start initialization, version 1.4.2
ivtv0: Initializing card 0
ivtv0: Unknown card: vendor/device: [4444:0016]
ivtv0:               subsystem vendor/device: [1179:0001]
ivtv0:               cx23416 based
ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD].
cfg80211: Calling CRDA to update world regulatory domain
ivtv 0000:02:09.0: enabling device (0000 -> 0002)
ivtv 0000:02:09.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
intel8x0_measure_ac97_clock: measured 50539 usecs (2436 samples)
intel8x0: clocking to 48000
tveeprom 3-0050: Huh, no eeprom present (err=-6)?
tveeprom 3-0050: Encountered bad packet header [c8]. Corrupt or not a Hauppauge eeprom.
ivtv0: Invalid EEPROM
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x80f: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x480-0x48f 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1e0-0x1f7 0x320-0x327 0x350-0x357 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
cx25840 3-0044: Unable to detect h/w, assuming cx23887
cx25840 3-0044: cx23887 A/V decoder found @ 0x88 (ivtv i2c driver #0)
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Chip ID is not zero. It is not a TEA5767
tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #0)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
wm8775 3-001b: I2C: cannot write 000 to register R23
wm8775 3-001b: I2C: cannot write 000 to register R7
wm8775 3-001b: I2C: cannot write 021 to register R11
wm8775 3-001b: I2C: cannot write 102 to register R12
wm8775 3-001b: I2C: cannot write 000 to register R13
wm8775 3-001b: I2C: cannot write 1d4 to register R14
wm8775 3-001b: I2C: cannot write 1d4 to register R15
wm8775 3-001b: I2C: cannot write 1bf to register R16
wm8775 3-001b: I2C: cannot write 185 to register R17
wm8775 3-001b: I2C: cannot write 0a2 to register R18
wm8775 3-001b: I2C: cannot write 005 to register R19
wm8775 3-001b: I2C: cannot write 07a to register R20
wm8775 3-001b: I2C: cannot write 102 to register R21
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card: Hauppauge WinTV PVR-150
ipw2200 0000:02:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ivtv: End initialization
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
EXT3-fs (hda1): using internal journal
lp: driver loaded but no devices found
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
usbcore: registered new interface driver snd-usb-audio
Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

On Mon, May 2, 2011 at 3:28 PM, werner <w.landgraf@ru.ru> wrote:
> Also, with this configuration, sync dont work, the terminal waits endless.
>  And if I type in 'reboot', then after the message it would go to reboot,
> nothing happens (it's possible that for reboot, sync is called).

Yes, sync is called for reboot.

However, that should be fairly easy to figure out. Well, perhaps not
"figure out", but at least get more details of where it is hanging. A
simple

   echo w > /proc/sysrq-trigger

should give you a nice trace in the dmesg showing where 'sync' is
hanging, and that would hopefully give us a lot more clues.

                                Linus

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

2011/5/2 werner <w.landgraf@ru.ru>:
>
> The unzip problem now didn't occure, I could unzip a 140 MB and a 460 MB
> file without it crashed.
>
> Actually it works stable? I have to continue to observe what happens.

Ok, please do continue to test to make sure.

Onc eyou are sure - and _if_ that kernel is stable - please then
enable CONFIG_IDE again, just to see whether it's CONFIG_IDE or the
CONFIG_X86_ELAN that causes the problems.

I suspect IDE (that would make more sense from the standpoint of where
the problem occurs), but we'd better make sure.

                          Linus

2.6.39-rc5-git2 boot crashs

[werner]

Also, with this configuration, sync dont work, the 
terminal waits endless.  And if I type in 'reboot', then 
after the message it would go to reboot, nothing happens 
(it's possible that for reboot, sync is called).
wl
---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[werner]

[-- Attachment #1: Type: text/plain, Size: 2063 bytes --]

I disabled now CONFIG_IDE , CONFIG-X86_ELAN , 
CONFIG_X86_EXTENDED-PATFORM .  Alias, moorestown I enabled 
since 2.6.37 because it gave big problems on my computer 
too.

On the other hand, I re-enabled CONFIG_MTD and 
CONFIG-MISC_FILESYSTEMS , what I disabled yesterday.


On booting, it came back the non-crash error reported 
earlier, see the enclosed syslog.  Thus, this may be 
caused by MTS oMISC_FILESYSTEMS.

The unzip problem now didn't occure, I could unzip a 140 
MB and a 460 MB file without it crashed.

Actually it works stable? I have to continue to observe 
what happens.

wl

   1 enclosed file, syslog
=======================================================================
On Mon, 2 May 2011 08:17:58 -0700
  Linus Torvalds <torvalds@linux-foundation.org> wrote:
> On Sun, May 1, 2011 at 11:54 PM, werner 
><w.landgraf@ru.ru> wrote:
>>
>> Then I gone back almost to my normal / everythingyes 
>>config, but I disabled
>> CONFIG_MSC_FILESYSTEMS and CONFIG-MTD , also ACPI-APEI 
>>because it needs
>> PSTORE of the 1st one.
> 
> Ok, good.
> 
>> With them disabled:  The 1st booting in grafic mode was 
>>normally. I also
>> could unzip a 120 MB file (what before with the 
>>everythingyes config
>> crashed).   However, if I tried to unzip an appr. 500 MB 
>>file, it crashed.
> 
> So that didn't help. Let's disable some other things 
>too.
> 
> Start off by disabling CONFIG_IDE, because you don't 
>need it and maybe
> it does stomp on the SATA stuff somehow (on your 
>computer, you
> _should_ be using just SATA_NV, I think).
> 
> But I also notice that you have enabled the X86 
>"extended platform"
> support, and in particular CONFIG_X86_ELAN, and that 
>will disable all
> the normal CPU logic. So please turn off 
>CONFIG_X86_EXTENDED_PLATFORM
> too, and use the "normal" x86 support.
> 
> Turn off CONFIG_EISA and CONFIG_MCA too, in order to 
>limit things a bit.
> 
> Let's see if that makes any difference.
> 
>                      Linus
> 
> 

"werner" <w.landgraf@ru.ru>
---
Professional hosting for everyone - http://www.host.ru

[-- Attachment #2: error.txt --]
[-- Type: text/plain, Size: 18856 bytes --]

May  2 17:57:33 werner kernel: Malformed early option 'acpi'
May  2 17:57:33 werner kernel: ACPI: RSDP 000fb9f0 00024 (v02 ACPIAM)
May  2 17:57:33 werner kernel: ACPI: XSDT affc0100 0004C (v01 A_M_I_ OEMXSDT  01000715 MSFT 00000097)
May  2 17:57:33 werner kernel: ACPI: FACP affc0290 000F4 (v03 A_M_I_ OEMFACP  01000715 MSFT 00000097)
May  2 17:57:33 werner kernel: ACPI: DSDT affc0440 04DAE (v01  A0647 A0647000 00000000 INTL 02002026)
May  2 17:57:33 werner kernel: ACPI: FACS affce000 00040
May  2 17:57:33 werner kernel: ACPI: APIC affc0390 00070 (v01 A_M_I_ OEMAPIC  01000715 MSFT 00000097)
May  2 17:57:33 werner kernel: ACPI: MCFG affc0400 0003C (v01 A_M_I_ OEMMCFG  01000715 MSFT 00000097)
May  2 17:57:33 werner kernel: ACPI: OEMB affce040 00060 (v01 A_M_I_ AMI_OEM  01000715 MSFT 00000097)
May  2 17:57:33 werner kernel: ACPI: HPET affc51f0 00038 (v01 A_M_I_ OEMHPET0 01000715 MSFT 00000097)
May  2 17:57:33 werner kernel: Zone PFN ranges:
May  2 17:57:33 werner kernel:   DMA      0x00000010 -> 0x00001000
May  2 17:57:33 werner kernel:   Normal   0x00001000 -> 0x000377fe
May  2 17:57:33 werner kernel:   HighMem  0x000377fe -> 0x000affc0
May  2 17:57:33 werner kernel: Movable zone start PFN for each node
May  2 17:57:33 werner kernel: early_node_map[2] active PFN ranges
May  2 17:57:33 werner kernel:     0: 0x00000010 -> 0x0000009f
May  2 17:57:33 werner kernel:     0: 0x00000100 -> 0x000affc0
May  2 17:57:33 werner kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 715087
May  2 17:57:33 werner kernel: Fast TSC calibration using PIT
May  2 17:57:33 werner kernel: Detected 2410.823 MHz processor.
May  2 17:57:33 werner kernel: ACPI: setting ELCR to 0200 (from 8c00)
May  2 17:57:33 werner kernel: AMD PMU driver.
May  2 17:57:33 werner kernel: raid6: int32x1    621 MB/s
May  2 17:57:33 werner kernel: raid6: int32x2   1003 MB/s
May  2 17:57:33 werner kernel: raid6: int32x4    746 MB/s
May  2 17:57:33 werner kernel: raid6: int32x8    589 MB/s
May  2 17:57:33 werner kernel: raid6: mmxx1     1914 MB/s
May  2 17:57:33 werner kernel: raid6: mmxx2     3226 MB/s
May  2 17:57:33 werner kernel: raid6: sse1x1    1871 MB/s
May  2 17:57:33 werner kernel: raid6: sse1x2    3136 MB/s
May  2 17:57:33 werner kernel: raid6: sse2x1    3187 MB/s
May  2 17:57:33 werner kernel: raid6: sse2x2    4265 MB/s
May  2 17:57:33 werner kernel: raid6: using algorithm sse2x2 (4265 MB/s)
May  2 17:57:33 werner kernel: ACPI: Executed 1 blocks of module-level executable AML code
May  2 17:57:33 werner kernel: mdacon: MDA with 8K of memory detected.
May  2 17:57:33 werner kernel: microcode: CPU0: family 15 not supported
May  2 17:57:33 werner kernel: The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.
May  2 17:57:33 werner kernel: highmem bounce pool size: 64 pages
May  2 17:57:33 werner kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May  2 17:57:33 werner kernel: DLM (built May  2 2011 14:36:48) installed
May  2 17:57:33 werner kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/
May  2 17:57:33 werner kernel: OCFS2 User DLM kernel interface loaded
May  2 17:57:33 werner kernel: GFS2 (built May  2 2011 14:38:12) installed
May  2 17:57:33 werner kernel: acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
May  2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
May  2 17:57:33 werner kernel: nvidiafb: CRTC0 analog found
May  2 17:57:33 werner kernel: nvidiafb: CRTC1 analog not found
May  2 17:57:33 werner kernel: i2c i2c-0: unable to read EDID block.
May  2 17:57:33 werner last message repeated 2 times
May  2 17:57:33 werner kernel: nvidiafb: EDID found from BUS2
May  2 17:57:33 werner kernel: nvidiafb: CRTC 0 appears to have a CRT attached
May  2 17:57:33 werner kernel: nvidiafb: Using CRT on CRTC 0
May  2 17:57:33 werner kernel: Could not find Carillo Ranch MCH device.
May  2 17:57:33 werner kernel: no IO addresses supplied
May  2 17:57:33 werner kernel: hgafb: probe of hgafb.0 failed with error -22
May  2 17:57:33 werner kernel: uvesafb: failed to execute /sbin/v86d
May  2 17:57:33 werner kernel: uvesafb: make sure that the v86d helper is installed and executable
May  2 17:57:33 werner kernel: uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
May  2 17:57:33 werner kernel: uvesafb: vbe_init() failed with -22
May  2 17:57:33 werner kernel: uvesafb: probe of uvesafb.0 failed with error -22
May  2 17:57:33 werner kernel: vesafb: cannot reserve video memory at 0xc0000000
May  2 17:57:33 werner kernel: toshiba: not a supported Toshiba laptop
May  2 17:57:33 werner kernel: Compaq SMART2 Driver (v 2.6.0)
May  2 17:57:33 werner kernel: i2c-core: driver [isl29003] using legacy suspend method
May  2 17:57:33 werner kernel: i2c-core: driver [isl29003] using legacy resume method
May  2 17:57:33 werner kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
May  2 17:57:33 werner kernel: scsi: <fdomain> Detection failed (no card)
May  2 17:57:33 werner kernel: NCR53c406a: no available ports found
May  2 17:57:33 werner kernel: Emulex LightPulse Fibre Channel SCSI driver 8.3.22
May  2 17:57:33 werner kernel: Copyright(c) 2004-2009 Emulex.  All rights reserved.
May  2 17:57:33 werner kernel: Failed initialization of WD-7000 SCSI card!
May  2 17:57:33 werner kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
May  2 17:57:33 werner kernel: 3ware Storage Controller device driver for Linux v1.26.02.003.
May  2 17:57:33 werner kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
May  2 17:57:33 werner kernel: imm: Version 2.05 (for Linux 2.4.0)
May  2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
May  2 17:57:33 werner kernel: mtdoops: mtd device (mtddev=name/number) must be supplied
May  2 17:57:33 werner kernel: physmap-flash.0: failed to claim resource 0
May  2 17:57:33 werner kernel: Failed to ioremap_nocache
May  2 17:57:33 werner last message repeated 2 times
May  2 17:57:33 werner kernel: SNAPGEAR: failed to ioremap() BOOTCS
May  2 17:57:33 werner kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
May  2 17:57:33 werner kernel: [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
May  2 17:57:33 werner last message repeated 5 times
May  2 17:57:33 werner kernel: flash size: 8 MiB
May  2 17:57:33 werner kernel: page size: 512 bytes
May  2 17:57:33 werner kernel: OOB area size: 16 bytes
May  2 17:57:33 werner kernel: sector size: 8 KiB
May  2 17:57:33 werner kernel: pages number: 16384
May  2 17:57:33 werner kernel: pages per sector: 16
May  2 17:57:33 werner kernel: bus width: 8
May  2 17:57:33 werner kernel: bits in sector size: 13
May  2 17:57:33 werner kernel: bits in page size: 9
May  2 17:57:33 werner kernel: bits in OOB size: 4
May  2 17:57:33 werner kernel: flash size with OOB: 8448 KiB
May  2 17:57:33 werner kernel: page address bytes: 3
May  2 17:57:33 werner kernel: sector address bytes: 2
May  2 17:57:33 werner kernel: options: 0x62
May  2 17:57:33 werner kernel: onenand_wait: timeout! ctrl=0x0000 intr=0x0000
May  2 17:57:33 werner kernel: DE600: port 0x378 busy
May  2 17:57:33 werner kernel: paride: aten registered as protocol 0
May  2 17:57:33 werner kernel: paride: bpck registered as protocol 1
May  2 17:57:33 werner kernel: paride: comm registered as protocol 2
May  2 17:57:33 werner kernel: paride: dstr registered as protocol 3
May  2 17:57:33 werner kernel: paride: k951 registered as protocol 4
May  2 17:57:33 werner kernel: paride: k971 registered as protocol 5
May  2 17:57:33 werner kernel: paride: epat registered as protocol 6
May  2 17:57:33 werner kernel: paride: epia registered as protocol 7
May  2 17:57:33 werner kernel: paride: frpw registered as protocol 8
May  2 17:57:33 werner kernel: paride: friq registered as protocol 9
May  2 17:57:33 werner kernel: paride: fit2 registered as protocol 10
May  2 17:57:33 werner kernel: paride: fit3 registered as protocol 11
May  2 17:57:33 werner kernel: paride: on20 registered as protocol 12
May  2 17:57:33 werner kernel: paride: on26 registered as protocol 13
May  2 17:57:33 werner kernel: paride: ktti registered as protocol 14
May  2 17:57:33 werner kernel: paride: bpck6 registered as protocol 15
May  2 17:57:33 werner kernel: pd: pd version 1.05, major 45, cluster 64, nice 0
May  2 17:57:33 werner kernel: pda: Autoprobe failed
May  2 17:57:33 werner kernel: pd: no valid drive found
May  2 17:57:33 werner kernel: pcd: pcd version 1.07, major 46, nice 0
May  2 17:57:33 werner kernel: pcd0: Autoprobe failed
May  2 17:57:33 werner kernel: pcd: No CD-ROM drive found
May  2 17:57:33 werner kernel: pf: pf version 1.04, major 47, cluster 64, nice 0
May  2 17:57:33 werner kernel: pf: No ATAPI disk detected
May  2 17:57:33 werner kernel: pt: pt version 1.04, major 96
May  2 17:57:33 werner kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
May  2 17:57:33 werner kernel: pt0: Autoprobe failed
May  2 17:57:33 werner kernel: pt: No ATAPI tape drive detected
May  2 17:57:33 werner kernel: pg: pg version 1.02, major 97
May  2 17:57:33 werner kernel: pga: Autoprobe failed
May  2 17:57:33 werner kernel: pg: No ATAPI device detected
May  2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
May  2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
May  2 17:57:33 werner kernel: GTCO usb driver version: 2.00.0006
May  2 17:57:33 werner kernel: mk712: device not present
May  2 17:57:33 werner kernel: wistron_btns: System unknown
May  2 17:57:33 werner kernel: EISA: Cannot allocate resource for mainboard
May  2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 1
May  2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 2
May  2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 3
May  2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 4
May  2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 5
May  2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 6
May  2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 7
May  2 17:57:33 werner kernel: Cannot allocate resource for EISA slot 8
May  2 17:57:33 werner kernel: asus_wmi: Management GUID not found
May  2 17:57:33 werner kernel: asus_wmi: Management GUID not found
May  2 17:57:33 werner kernel: compal-laptop: Motherboard not recognized (You could try the module's force-parameter)
May  2 17:57:33 werner kernel: dell-wmi: No known WMI GUID found
May  2 17:57:33 werner kernel: dell_wmi_aio: No known WMI GUID found
May  2 17:57:33 werner kernel: acer_wmi: No or unsupported WMI interface, unable to load
May  2 17:57:33 werner kernel: acerhdf: unknown (unsupported) BIOS version System manufacturer/System Product Name/0413   , please report, aborting!
May  2 17:57:33 werner kernel: hdaps: supported laptop not found!
May  2 17:57:33 werner kernel: hdaps: driver init failed (ret=-19)!
May  2 17:57:33 werner kernel: This machine doesn't have MSI-hotkeys through WMI
May  2 17:57:33 werner kernel: [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
May  2 17:57:33 werner kernel: powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
May  2 17:57:33 werner kernel: hd: no drives specified - use hd=cyl,head,sectors on kernel command line
May  2 17:57:33 werner kernel: usb 2-3: device descriptor read/64, error -62
May  2 17:57:33 werner last message repeated 3 times
May  2 17:57:33 werner kernel: usb 2-3: device not accepting address 4, error -62
May  2 17:57:33 werner kernel: usb 2-3: device not accepting address 5, error -62
May  2 17:57:33 werner kernel: hub 2-0:1.0: unable to enumerate USB device on port 3
May  2 17:57:33 werner kernel: udevd (2885): /proc/2885/oom_adj is deprecated, please use /proc/2885/oom_score_adj instead.
May  2 17:57:33 werner kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
May  2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
May  2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
May  2 17:57:33 werner kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
May  2 17:57:33 werner kernel: EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
May  2 17:57:33 werner kernel: rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
May  2 17:57:33 werner kernel: EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
May  2 17:57:33 werner kernel: REISERFS warning (device sda3): sh-2021 reiserfs_fill_super: can not find reiserfs on sda3
May  2 17:57:33 werner kernel: EXT2-fs (sda3): error: can't find an ext2 filesystem on dev sda3.
May  2 17:57:33 werner kernel: EXT4-fs (sda3): VFS: Can't find ext4 filesystem
May  2 17:57:33 werner kernel: cramfs: wrong magic
May  2 17:57:33 werner kernel: SQUASHFS error: Can't find a SQUASHFS superblock on sda3
May  2 17:57:33 werner kernel: VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda3.
May  2 17:57:33 werner kernel: FAT: invalid media value (0x75)
May  2 17:57:33 werner kernel: FAT: invalid media value (0x75)
May  2 17:57:33 werner kernel: BFS-fs: bfs_fill_super(): No BFS filesystem on sda3 (magic=458bc330)
May  2 17:57:33 werner kernel: ISOFS: Unable to identify CD-ROM format.
May  2 17:57:33 werner kernel: hfs: unable to find HFS+ superblock
May  2 17:57:33 werner kernel: hfs: can't find a HFS filesystem on dev sda3.
May  2 17:57:33 werner kernel: VFS: unable to find oldfs superblock on device sda3
May  2 17:57:33 werner kernel: VFS: could not find a valid V7 on sda3.
May  2 17:57:33 werner kernel: HPFS: Bad magic ... probably not HPFS
May  2 17:57:33 werner kernel: NTFS-fs warning (device sda3): is_boot_sector_ntfs(): Invalid boot sector checksum.
May  2 17:57:33 werner kernel: NTFS-fs error (device sda3): read_ntfs_boot_sector(): Primary boot sector is invalid.
May  2 17:57:33 werner kernel: NTFS-fs error (device sda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
May  2 17:57:33 werner kernel: NTFS-fs error (device sda3): ntfs_fill_super(): Not an NTFS volume.
May  2 17:57:33 werner kernel: You didn't specify the type of your ufs filesystem
May  2 17:57:33 werner kernel: 
May  2 17:57:33 werner kernel: mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
May  2 17:57:33 werner kernel: 
May  2 17:57:33 werner kernel: >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
May  2 17:57:33 werner kernel: ufs_read_super: bad magic number
May  2 17:57:33 werner kernel: BUG: unable to handle kernel NULL pointer dereference at 00000004
May  2 17:57:33 werner kernel: IP: [<c12d00a3>] logfs_drop_inode+0x3c/0x68
May  2 17:57:33 werner kernel: *pde = 00000000 
May  2 17:57:33 werner kernel: Oops: 0002 [#1] SMP 
May  2 17:57:33 werner kernel: last sysfs file: /sys/devices/pci0000:00/0000:00:08.0/host2/target2:0:0/2:0:0:0/block/sda/dev
May  2 17:57:33 werner kernel: Modules linked in: snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device rt2860sta(C) uvcvideo asus_atk0110 snd_hda_codec_realtek 8139too rtc_cmos snd_hda_intel rtc_core rtc_lib snd_hda_codec tpm_tis snd_hwdep tpm tpm_bios snd_pcm snd_timer snd soundcore atl1 k8temp snd_page_alloc i2c_nforce2
May  2 17:57:33 werner kernel: 
May  2 17:57:33 werner kernel: Pid: 5592, comm: mount Tainted: G         C  2.6.39-rc5-git4-i486-1sys #1 System manufacturer System Product Name/M2N8-VMX
May  2 17:57:33 werner kernel: EIP: 0060:[<c12d00a3>] EFLAGS: 00010246 CPU: 0
May  2 17:57:33 werner kernel: EIP is at logfs_drop_inode+0x3c/0x68
May  2 17:57:33 werner kernel: EAX: 00000000 EBX: f0716000 ECX: f07161f4 EDX: f07161f4
May  2 17:57:33 werner kernel: ESI: f5224000 EDI: f527ca00 EBP: ee017e68 ESP: ee017e60
May  2 17:57:33 werner kernel:  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
May  2 17:57:33 werner kernel: Process mount (pid: 5592, ti=ee016000 task=f56c6730 task.ti=ee016000)
May  2 17:57:33 werner kernel: Stack:
May  2 17:57:33 werner kernel:  c1f07a8c f0716000 ee017e7c c10e9f9d ffffffea f527ca00 f67bd6c0 ee017eb8
May  2 17:57:33 werner kernel:  c12d765a 00000000 00000000 c156de18 00000000 f5224000 00000400 f5224000
May  2 17:57:33 werner kernel:  f67bd6a0 00000040 0000000a 00000000 f5286a20 f5286a20 ee017ef0 c10d9545
May  2 17:57:33 werner kernel: Call Trace:
May  2 17:57:33 werner kernel:  [<c10e9f9d>] iput+0x5c/0x119
May  2 17:57:33 werner kernel:  [<c12d765a>] logfs_mount+0x44f/0x5ca
May  2 17:57:33 werner kernel:  [<c156de18>] ? ida_get_new_above+0x16c/0x186
May  2 17:57:33 werner kernel:  [<c10d9545>] mount_fs+0x68/0x13e
May  2 17:57:33 werner kernel:  [<c10b1727>] ? kstrdup+0x30/0x41
May  2 17:57:33 werner kernel:  [<c10ee12b>] vfs_kern_mount+0x53/0x7f
May  2 17:57:33 werner kernel:  [<c10ee1af>] do_kern_mount+0x3c/0xbb
May  2 17:57:33 werner kernel:  [<c10ee84b>] do_mount+0x61d/0x669
May  2 17:57:33 werner kernel:  [<c10ed433>] ? copy_mount_options+0xe/0xe6
May  2 17:57:33 werner kernel:  [<c10b1659>] ? memdup_user+0x34/0x4b
May  2 17:57:33 werner kernel:  [<c10b16a1>] ? strndup_user+0x31/0x42
May  2 17:57:33 werner kernel:  [<c10ee904>] sys_mount+0x6d/0x99
May  2 17:57:33 werner kernel:  [<c1e9e42c>] syscall_call+0x7/0xb
May  2 17:57:33 werner kernel: Code: 8c 01 00 00 b8 60 59 76 c2 e8 c9 df bc 00 8b 83 f8 01 00 00 8d 8b f4 01 00 00 8b 93 f4 01 00 00 89 42 04 89 10 8b 86 54 02 00 00 
May  2 17:57:33 werner kernel: EIP: [<c12d00a3>] logfs_drop_inode+0x3c/0x68 SS:ESP 0068:ee017e60
May  2 17:57:33 werner kernel: CR2: 0000000000000004
May  2 17:57:33 werner kernel: ---[ end trace 2e5a561f55162e52 ]---
May  2 17:57:35 werner udevd-event[5659]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
May  2 17:57:35 werner udevd-event[5663]: udev_rules_apply_format: unknown format variable '$modalias | grep -q eagle-usb || exit; while ! /sbin/eaglectrl -p 2>/dev/null | /bin/grep -q Post-firmware; do sleep 2; done; /sbin/eaglectrl -d''
May  2 17:57:45 werner apcupsd[5637]: apcupsd FATAL ERROR in smartsetup.c at line 171 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct. 
May  2 17:57:45 werner apcupsd[5637]: apcupsd error shutdown completed
May  2 17:57:57 werner udevd[2885]: add_to_rules: unknown key 'MODALIAS' in /etc/udev/rules.d/80-eagle-usb.rules:1
May  2 17:58:18 werner kdm_greet[6068]: Can't open default user face

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

On Sun, May 1, 2011 at 11:54 PM, werner <w.landgraf@ru.ru> wrote:
>
> Then I gone back almost to my normal / everythingyes config, but I disabled
> CONFIG_MSC_FILESYSTEMS and CONFIG-MTD , also ACPI-APEI because it needs
> PSTORE of the 1st one.

Ok, good.

> With them disabled:  The 1st booting in grafic mode was normally. I also
> could unzip a 120 MB file (what before with the everythingyes config
> crashed).   However, if I tried to unzip an appr. 500 MB file, it crashed.

So that didn't help. Let's disable some other things too.

Start off by disabling CONFIG_IDE, because you don't need it and maybe
it does stomp on the SATA stuff somehow (on your computer, you
_should_ be using just SATA_NV, I think).

But I also notice that you have enabled the X86 "extended platform"
support, and in particular CONFIG_X86_ELAN, and that will disable all
the normal CPU logic. So please turn off CONFIG_X86_EXTENDED_PLATFORM
too, and use the "normal" x86 support.

Turn off CONFIG_EISA and CONFIG_MCA too, in order to limit things a bit.

Let's see if that makes any difference.

                      Linus

Re: 2.6.39-rc5-git2 boot crashs

[Steven Rostedt]

On Mon, 2011-05-02 at 09:56 -0400, werner wrote:
> A middle-big config (starting from Slackware huge-smp, or 
> from a L.T. werner-config) works.  A more simple one, or a 
> more bigger one, both don't work, but probably by 
> different reasons.

Could you email me privately the three configs.

Thanks!

-- Steve

2.6.39-rc5-git2 boot crashs

[werner]

A middle-big config (starting from Slackware huge-smp, or 
from a L.T. werner-config) works.  A more simple one, or a 
more bigger one, both don't work, but probably by 
different reasons.

A very basical config (starting from Slackware normal-smp) 
stops booting after 2 seconds; it don't find the root 
device (even if I told to it at the command line by the 
bios or dev name), and although the bootwait option, it 
crashs rather than simply wait.

An everythingyes config get several problems, reported 
here (and in my 2.6.39-rc3 reclamations).  Some of them 
are: crashs on zipping big files; secondary 
reset-resistent crashs wrongly understanding anything as 
ata device.

wl
---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[Steven Rostedt]

On Sun, 2011-05-01 at 11:20 -0700, Linus Torvalds wrote:
> 2011/5/1 werner <w.landgraf@ru.ru>:

> So what I'd suggest you try to do is a "config bisect" to see exactly
> _what_ config option it is that makes things break. Steve Rostedt
> wrote a tool ("ktest") for this exact thing, but I'm not entirely sure
> that it will work for your situation. I've added Steve to the email
> participants, and I'd suggest you read up on it:
> 
>   http://lwn.net/Articles/414064/
> 
> would seem to be a good starting point.

Note, from his email he has:


> That successful slackware huge config is in the middle between the
> slackware smp config explained above which didnt boot, and between my
> normal everythingyes configuration which gave plenty problems.

Which, if I understand this correctly, is three different configs: A, B
and C and they have a relationship of A < B < C. Where A doesn't boot, B
does, and C boots with problems.

config-bisect can definitely find the issues between B and C, which I
think is a second issue. As for the problems of A and B it may not work
so well. This would require a "reverse bisect" as "config bisect" is
much like git bisect where it expects things to work then suddenly
break. The difference between git bisect and config bisect is that a
reverse wont work with config bisect (it might if you're lucky). That's
because git may have branches, but configs have nasty dependencies.

The way config bisect works to find a bad config (one if set will break
the kernel) is the following algorithm:

o You feed it a good config (does not have config that breaks the
kernel), and a config that breaks the kernel (contains a bad config).

again:

o It will select all the configs that are in both of the configs and
half of those configs that are in the difference of the two configs and
run make oldnoconfig on it. Because these configs can select other
configs or may depend on other configs not selected, it is possible that
we end up with the bad or good config again. So ktest does a diff on
this config to make sure it is different. If it is not then it will
select the other half instead. If it is also the same, then it will
select only one config at a time until it finds a config that is
different.

o runs the test
(you can add CONFIG_BISECT_TYPE = build, BISECT_MANUAL = 1, which will
just build the kernel and then wait for you to say if it was good or
bad. This is handy if you don't want to set up all the automation of
ktest and only want it to do the config bisect for you. Then you can
install and reboot the kernel and then tell ktest if it worked or not).
This still requires that the build machine to be on a separate box than
the test machine.

o If the test fails, it takes this config as the new bad config, and the
difference will be against this config and the good config.

o If the test passes, it believes all these configs that were selected
are good, and will permanently select them for the remainder of the
tests. We need to permanently select this configs because later configs
(and perhaps the bad config) may have dependencies on these configs.

o If there's no more configs to compare, then the last config to be
selected is the bad config, otherwise goto "again".


This works great when you have a bad config you are looking for. I've
used this 4 or 5 times already which had great results. But I do not
think it will help if there's a good config that makes the kernel work
again. If we select that config on the first pass, then all new configs
will contain this working config.


> 
> Of course, you could just try to do it manually too - just turn one
> subsystem at a time from a module in the working slackware config into
> a compiled-in thing, so that eventually you end up with the
> non-working "almost everything compiled in" case. And see which
> subsystem it is that causes problems.
> 
> And then when you find the subsystem that makes the problem re-appear,
> you'd need to go back and try each driver at a time.

I'm confused, as I thought the working config was between the two broken
configs he has. Maybe I just misunderstood.

-- Steve

Re: 2.6.39-rc5-git2 boot crashs

[Steven Rostedt]

On Mon, May 02, 2011 at 03:09:14AM -0400, werner wrote:
> For make it more easy to see what potentially could be the reason
> for these problems, below is the difference in the config: between
> my everythingyes config (used since -git2), and the good working
> config based on Slw. huge-smp with more things disabled. If someone
> tell me what potentially could cause such problems, I can re-compile
> the kernel, disabling it.
> 

FYI,

There's a cool utility in the scripts directory called diffconfig. It
gives a much nicer output than doing a normal diff.

Thanks,

-- Steve

2.6.39-rc5-git2 boot crashs

[werner]

For make it more easy to see what potentially could be the 
reason for these problems, below is the difference in the 
config: between my everythingyes config (used since 
-git2), and the good working config based on Slw. huge-smp 
with more things disabled. If someone tell me what 
potentially could cause such problems, I can re-compile 
the kernel, disabling it.

wl

===================
3,4c3,4
< # Linux/i386 2.6.39-rc5-git2 Kernel Configuration
< # Fri Apr 29 15:48:26 2011
---
> # Linux/i386 2.6.39-rc5-git4 Kernel Configuration
> # Sun May  1 11:42:21 2011
22c22
< CONFIG_NEED_DMA_MAP_STATE=y
---
> # CONFIG_NEED_DMA_MAP_STATE is not set
49d48
< CONFIG_HAVE_INTEL_TXT=y
73c72
< CONFIG_KERNEL_GZIP=y
---
> # CONFIG_KERNEL_GZIP is not set
75c74
< # CONFIG_KERNEL_LZMA is not set
---
> CONFIG_KERNEL_LZMA=y
86c85,88
< # CONFIG_TASKSTATS is not set
---
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
111a114
> # CONFIG_RCU_FAST_NO_HZ is not set
115c118
< CONFIG_LOG_BUF_SHIFT=21
---
> CONFIG_LOG_BUF_SHIFT=15
119,124c122,131
< # CONFIG_CGROUP_NS is not set
< # CONFIG_CGROUP_FREEZER is not set
< # CONFIG_CGROUP_DEVICE is not set
< # CONFIG_CPUSETS is not set
< # CONFIG_CGROUP_CPUACCT is not set
< # CONFIG_RESOURCE_COUNTERS is not set
---
> CONFIG_CGROUP_NS=y
> CONFIG_CGROUP_FREEZER=y
> CONFIG_CGROUP_DEVICE=y
> CONFIG_CPUSETS=y
> CONFIG_PROC_PID_CPUSET=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_RESOURCE_COUNTERS=y
> CONFIG_CGROUP_MEM_RES_CTLR=y
> CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
> # CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
128,129c135,137
< # CONFIG_RT_GROUP_SCHED is not set
< # CONFIG_BLK_CGROUP is not set
---
> CONFIG_RT_GROUP_SCHED=y
> CONFIG_BLK_CGROUP=y
> # CONFIG_DEBUG_BLK_CGROUP is not set
136a145
> CONFIG_MM_OWNER=y
146c155
< CONFIG_CC_OPTIMIZE_FOR_SIZE=y
---
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
149c158
< CONFIG_EXPERT=y
---
> # CONFIG_EXPERT is not set
152a162
> # CONFIG_KALLSYMS_ALL is not set
167c177
< CONFIG_EMBEDDED=y
---
> # CONFIG_EMBEDDED is not set
174a185
> # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
181d191
< # CONFIG_SLOB is not set
184,185c194,195
< CONFIG_OPROFILE=y
< CONFIG_OPROFILE_EVENT_MULTIPLEX=y
---
> CONFIG_OPROFILE=m
> # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
188c198
< CONFIG_JUMP_LABEL=y
---
> # CONFIG_JUMP_LABEL is not set
224c234,235
< CONFIG_BLK_DEV_INTEGRITY=y
---
> # CONFIG_BLK_DEV_INTEGRITY is not set
> CONFIG_BLK_DEV_THROTTLING=y
231a243
> CONFIG_CFQ_GROUP_IOSCHED=y
273c285
< # CONFIG_NO_HZ is not set
---
> CONFIG_NO_HZ=y
279,283c291
< CONFIG_X86_EXTENDED_PLATFORM=y
< CONFIG_X86_ELAN=y
< # CONFIG_X86_MRST is not set
< CONFIG_X86_RDC321X=y
< # CONFIG_X86_32_NON_STANDARD is not set
---
> # CONFIG_X86_EXTENDED_PLATFORM is not set
285c293
< CONFIG_X86_32_IRIS=y
---
> CONFIG_X86_32_IRIS=m
287,294c295
< CONFIG_PARAVIRT_GUEST=y
< # CONFIG_XEN_PRIVILEGED_GUEST is not set
< CONFIG_KVM_CLOCK=y
< CONFIG_KVM_GUEST=y
< CONFIG_LGUEST_GUEST=y
< CONFIG_PARAVIRT=y
< # CONFIG_PARAVIRT_SPINLOCKS is not set
< CONFIG_PARAVIRT_CLOCK=y
---
> # CONFIG_PARAVIRT_GUEST is not set
297c298,323
< CONFIG_X86_INTERNODE_CACHE_SHIFT=4
---
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> CONFIG_M686=y
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MATOM is not set
> CONFIG_X86_GENERIC=y
> CONFIG_X86_INTERNODE_CACHE_SHIFT=7
300c326
< CONFIG_X86_L1_CACHE_SHIFT=4
---
> CONFIG_X86_L1_CACHE_SHIFT=6
301a328
> # CONFIG_X86_PPRO_FENCE is not set
306,307c333,338
< CONFIG_X86_ALIGNMENT_16=y
< CONFIG_X86_MINIMUM_CPU_FAMILY=4
---
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=5
309d339
< CONFIG_PROCESSOR_SELECT=y
320c350
< CONFIG_IOMMU_API=y
---
> # CONFIG_IOMMU_API is not set
325,326c355,356
< # CONFIG_PREEMPT_NONE is not set
< CONFIG_PREEMPT_VOLUNTARY=y
---
> CONFIG_PREEMPT_NONE=y
> # CONFIG_PREEMPT_VOLUNTARY is not set
336c366
< CONFIG_X86_MCE_INJECT=y
---
> CONFIG_X86_MCE_INJECT=m
339,340c369,370
< CONFIG_TOSHIBA=y
< CONFIG_I8K=y
---
> CONFIG_TOSHIBA=m
> CONFIG_I8K=m
342c372
< CONFIG_MICROCODE=y
---
> CONFIG_MICROCODE=m
346,347c376,377
< CONFIG_X86_MSR=y
< CONFIG_X86_CPUID=y
---
> CONFIG_X86_MSR=m
> CONFIG_X86_CPUID=m
349,355c379,380
< CONFIG_HIGHMEM4G=y
< # CONFIG_HIGHMEM64G is not set
< CONFIG_VMSPLIT_3G=y
< # CONFIG_VMSPLIT_3G_OPT is not set
< # CONFIG_VMSPLIT_2G is not set
< # CONFIG_VMSPLIT_2G_OPT is not set
< # CONFIG_VMSPLIT_1G is not set
---
> # CONFIG_HIGHMEM4G is not set
> CONFIG_HIGHMEM64G=y
358,360c383,393
< # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
< # CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
< CONFIG_ARCH_FLATMEM_ENABLE=y
---
> CONFIG_X86_PAE=y
> CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> CONFIG_NUMA=y
> CONFIG_NODES_SHIFT=3
> CONFIG_HAVE_ARCH_BOOTMEM=y
> CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
> CONFIG_NEED_NODE_MEMMAP_SIZE=y
> CONFIG_HAVE_ARCH_ALLOC_REMAP=y
> CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
> CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
365c398
< CONFIG_FLATMEM_MANUAL=y
---
> CONFIG_DISCONTIGMEM_MANUAL=y
367c400
< CONFIG_FLATMEM=y
---
> CONFIG_DISCONTIGMEM=y
368a402,403
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
375c410
< # CONFIG_PHYS_ADDR_T_64BIT is not set
---
> CONFIG_PHYS_ADDR_T_64BIT=y
380,381c415,416
< CONFIG_KSM=y
< CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
---
> # CONFIG_KSM is not set
> CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
383c418
< CONFIG_MEMORY_FAILURE=y
---
> # CONFIG_MEMORY_FAILURE is not set
388,389c423
< CONFIG_X86_CHECK_BIOS_CORRUPTION=y
< CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
---
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
415a450,451
> # CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
> CONFIG_USE_PERCPU_NUMA_NODE_ID=y
435c471
< # CONFIG_ACPI_EC_DEBUGFS is not set
---
> CONFIG_ACPI_EC_DEBUGFS=m
437,441c473,477
< CONFIG_ACPI_AC=y
< CONFIG_ACPI_BATTERY=y
< CONFIG_ACPI_BUTTON=y
< CONFIG_ACPI_VIDEO=y
< CONFIG_ACPI_FAN=y
---
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_BATTERY=m
> CONFIG_ACPI_BUTTON=m
> CONFIG_ACPI_VIDEO=m
> CONFIG_ACPI_FAN=m
443c479
< CONFIG_ACPI_PROCESSOR=y
---
> CONFIG_ACPI_PROCESSOR=m
446,447c482,484
< CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
< CONFIG_ACPI_THERMAL=y
---
> CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
> CONFIG_ACPI_THERMAL=m
> # CONFIG_ACPI_NUMA is not set
451c488
< CONFIG_ACPI_PCI_SLOT=y
---
> CONFIG_ACPI_PCI_SLOT=m
453,455c490,492
< CONFIG_ACPI_CONTAINER=y
< CONFIG_ACPI_SBS=y
< CONFIG_ACPI_HED=y
---
> CONFIG_ACPI_CONTAINER=m
> CONFIG_ACPI_SBS=m
> CONFIG_ACPI_HED=m
459,460c496,497
< # CONFIG_ACPI_APEI_EINJ is not set
< # CONFIG_ACPI_APEI_ERST_DEBUG is not set
---
> CONFIG_ACPI_APEI_EINJ=m
> CONFIG_ACPI_APEI_ERST_DEBUG=m
463c500
< CONFIG_APM=y
---
> CONFIG_APM=m
474c511
< CONFIG_CPU_FREQ_TABLE=y
---
> CONFIG_CPU_FREQ_TABLE=m
476c513
< CONFIG_CPU_FREQ_STAT=y
---
> CONFIG_CPU_FREQ_STAT=m
478,480c515,516
< CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
< # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
< # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
---
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
483,484c519,520
< CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
< CONFIG_CPU_FREQ_GOV_POWERSAVE=y
---
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
486,487c522,523
< CONFIG_CPU_FREQ_GOV_ONDEMAND=y
< CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
---
> CONFIG_CPU_FREQ_GOV_ONDEMAND=m
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
492,497c528,531
< CONFIG_X86_PCC_CPUFREQ=y
< CONFIG_X86_ACPI_CPUFREQ=y
< CONFIG_ELAN_CPUFREQ=y
< CONFIG_SC520_CPUFREQ=y
< CONFIG_X86_POWERNOW_K6=y
< CONFIG_X86_POWERNOW_K7=y
---
> CONFIG_X86_PCC_CPUFREQ=m
> CONFIG_X86_ACPI_CPUFREQ=m
> CONFIG_X86_POWERNOW_K6=m
> CONFIG_X86_POWERNOW_K7=m
499,501c533,535
< CONFIG_X86_POWERNOW_K8=y
< CONFIG_X86_GX_SUSPMOD=y
< CONFIG_X86_SPEEDSTEP_CENTRINO=y
---
> CONFIG_X86_POWERNOW_K8=m
> CONFIG_X86_GX_SUSPMOD=m
> CONFIG_X86_SPEEDSTEP_CENTRINO=m
503,509c537,543
< CONFIG_X86_SPEEDSTEP_ICH=y
< CONFIG_X86_SPEEDSTEP_SMI=y
< CONFIG_X86_P4_CLOCKMOD=y
< CONFIG_X86_CPUFREQ_NFORCE2=y
< CONFIG_X86_LONGRUN=y
< CONFIG_X86_LONGHAUL=y
< CONFIG_X86_E_POWERSAVER=y
---
> CONFIG_X86_SPEEDSTEP_ICH=m
> CONFIG_X86_SPEEDSTEP_SMI=m
> CONFIG_X86_P4_CLOCKMOD=m
> CONFIG_X86_CPUFREQ_NFORCE2=m
> CONFIG_X86_LONGRUN=m
> CONFIG_X86_LONGHAUL=m
> CONFIG_X86_E_POWERSAVER=m
514c548
< CONFIG_X86_SPEEDSTEP_LIB=y
---
> CONFIG_X86_SPEEDSTEP_LIB=m
517a552
> CONFIG_CPU_IDLE_GOV_MENU=y
527d561
< # CONFIG_PCI_GOOLPC is not set
532d565
< CONFIG_PCI_OLPC=y
534,537c567,568
< CONFIG_PCI_CNB20LE_QUIRK=y
< CONFIG_DMAR=y
< CONFIG_DMAR_DEFAULT_ON=y
< CONFIG_DMAR_FLOPPY_WA=y
---
> # CONFIG_PCI_CNB20LE_QUIRK is not set
> # CONFIG_DMAR is not set
539c570
< CONFIG_HOTPLUG_PCI_PCIE=y
---
> CONFIG_HOTPLUG_PCI_PCIE=m
541,542c572,573
< CONFIG_PCIE_ECRC=y
< CONFIG_PCIEAER_INJECT=y
---
> # CONFIG_PCIE_ECRC is not set
> CONFIG_PCIEAER_INJECT=m
544c575
< CONFIG_PCIEASPM_DEBUG=y
---
> # CONFIG_PCIEASPM_DEBUG is not set
548c579,580
< # CONFIG_PCI_STUB is not set
---
> # CONFIG_PCI_DEBUG is not set
> CONFIG_PCI_STUB=m
550c582
< CONFIG_PCI_IOV=y
---
> # CONFIG_PCI_IOV is not set
555,566c587,590
< CONFIG_EISA=y
< CONFIG_EISA_VLB_PRIMING=y
< CONFIG_EISA_PCI_EISA=y
< CONFIG_EISA_VIRTUAL_ROOT=y
< CONFIG_EISA_NAMES=y
< CONFIG_MCA=y
< CONFIG_MCA_LEGACY=y
< CONFIG_MCA_PROC_FS=y
< CONFIG_SCx200=y
< CONFIG_SCx200HR_TIMER=y
< CONFIG_OLPC=y
< CONFIG_OLPC_XO1=m
---
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> CONFIG_SCx200=m
> CONFIG_SCx200HR_TIMER=m
568,569c592,593
< CONFIG_PCCARD=y
< CONFIG_PCMCIA=y
---
> CONFIG_PCCARD=m
> CONFIG_PCMCIA=m
576c600
< CONFIG_YENTA=y
---
> CONFIG_YENTA=m
582,585c606,609
< CONFIG_PD6729=y
< CONFIG_I82092=y
< CONFIG_I82365=y
< CONFIG_TCIC=y
---
> CONFIG_PD6729=m
> CONFIG_I82092=m
> CONFIG_I82365=m
> CONFIG_TCIC=m
589,590c613,614
< # CONFIG_HOTPLUG_PCI_FAKE is not set
< CONFIG_HOTPLUG_PCI_COMPAQ=y
---
> CONFIG_HOTPLUG_PCI_FAKE=m
> CONFIG_HOTPLUG_PCI_COMPAQ=m
592,607c616,621
< CONFIG_HOTPLUG_PCI_IBM=y
< CONFIG_HOTPLUG_PCI_ACPI=y
< CONFIG_HOTPLUG_PCI_ACPI_IBM=y
< CONFIG_HOTPLUG_PCI_CPCI=y
< CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
< CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
< CONFIG_HOTPLUG_PCI_SHPC=y
< CONFIG_RAPIDIO=y
< CONFIG_RAPIDIO_DISC_TIMEOUT=30
< CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
< CONFIG_RAPIDIO_TSI57X=y
< CONFIG_RAPIDIO_CPS_XX=y
< CONFIG_RAPIDIO_TSI568=y
< CONFIG_RAPIDIO_CPS_GEN2=y
< CONFIG_RAPIDIO_TSI500=y
< CONFIG_RAPIDIO_DEBUG=y
---
> CONFIG_HOTPLUG_PCI_IBM=m
> CONFIG_HOTPLUG_PCI_ACPI=m
> CONFIG_HOTPLUG_PCI_ACPI_IBM=m
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> CONFIG_HOTPLUG_PCI_SHPC=m
> # CONFIG_RAPIDIO is not set
615,616c629,630
< CONFIG_BINFMT_AOUT=y
< CONFIG_BINFMT_MISC=y
---
> CONFIG_BINFMT_AOUT=m
> CONFIG_BINFMT_MISC=m
628,630c642,644
< CONFIG_XFRM_SUB_POLICY=y
< CONFIG_XFRM_MIGRATE=y
< CONFIG_XFRM_STATISTICS=y
---
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_XFRM_MIGRATE is not set
> # CONFIG_XFRM_STATISTICS is not set
633c647
< CONFIG_NET_KEY_MIGRATE=y
---
> # CONFIG_NET_KEY_MIGRATE is not set
637c651
< CONFIG_IP_FIB_TRIE_STATS=y
---
> # CONFIG_IP_FIB_TRIE_STATS is not set
642,646c656,657
< CONFIG_IP_PNP=y
< CONFIG_IP_PNP_DHCP=y
< CONFIG_IP_PNP_BOOTP=y
< CONFIG_IP_PNP_RARP=y
< CONFIG_NET_IPIP=y
---
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
654c665
< CONFIG_ARPD=y
---
> # CONFIG_ARPD is not set
660c671
< CONFIG_INET_TUNNEL=y
---
> CONFIG_INET_TUNNEL=m
665,668c676,678
< CONFIG_INET_DIAG=y
< CONFIG_INET_TCP_DIAG=y
< CONFIG_TCP_CONG_ADVANCED=y
< CONFIG_TCP_CONG_BIC=m
---
> CONFIG_INET_DIAG=m
> CONFIG_INET_TCP_DIAG=m
> # CONFIG_TCP_CONG_ADVANCED is not set
670,681d679
< CONFIG_TCP_CONG_WESTWOOD=m
< CONFIG_TCP_CONG_HTCP=m
< CONFIG_TCP_CONG_HSTCP=m
< CONFIG_TCP_CONG_HYBLA=m
< CONFIG_TCP_CONG_VEGAS=m
< CONFIG_TCP_CONG_SCALABLE=m
< CONFIG_TCP_CONG_LP=m
< CONFIG_TCP_CONG_VENO=m
< CONFIG_TCP_CONG_YEAH=m
< CONFIG_TCP_CONG_ILLINOIS=m
< CONFIG_DEFAULT_CUBIC=y
< # CONFIG_DEFAULT_RENO is not set
683,684c681,682
< CONFIG_TCP_MD5SIG=y
< CONFIG_IPV6=y
---
> # CONFIG_TCP_MD5SIG is not set
> CONFIG_IPV6=m
686,688c684,685
< CONFIG_IPV6_ROUTER_PREF=y
< CONFIG_IPV6_ROUTE_INFO=y
< CONFIG_IPV6_OPTIMISTIC_DAD=y
---
> # CONFIG_IPV6_ROUTER_PREF is not set
> # CONFIG_IPV6_OPTIMISTIC_DAD is not set
700c697
< CONFIG_IPV6_SIT_6RD=y
---
> # CONFIG_IPV6_SIT_6RD is not set
703,708c700,702
< CONFIG_IPV6_MULTIPLE_TABLES=y
< CONFIG_IPV6_SUBTREES=y
< CONFIG_IPV6_MROUTE=y
< CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
< CONFIG_IPV6_PIMSM_V2=y
< CONFIG_NETLABEL=y
---
> # CONFIG_IPV6_MULTIPLE_TABLES is not set
> # CONFIG_IPV6_MROUTE is not set
> # CONFIG_NETLABEL is not set
724c718
< # CONFIG_NF_CONNTRACK_ZONES is not set
---
> CONFIG_NF_CONNTRACK_ZONES=y
737c731
< CONFIG_NF_CONNTRACK_SNMP=m
---
> # CONFIG_NF_CONNTRACK_SNMP is not set
751d744
< # CONFIG_NETFILTER_XT_SET is not set
756c749
< CONFIG_NETFILTER_XT_TARGET_AUDIT=m
---
> # CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
779c772
< CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
---
> # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
788c781
< CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
---
> # CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
818,829c811
< CONFIG_IP_SET=m
< CONFIG_IP_SET_MAX=256
< CONFIG_IP_SET_BITMAP_IP=m
< CONFIG_IP_SET_BITMAP_IPMAC=m
< CONFIG_IP_SET_BITMAP_PORT=m
< CONFIG_IP_SET_HASH_IP=m
< CONFIG_IP_SET_HASH_IPPORT=m
< CONFIG_IP_SET_HASH_IPPORTIP=m
< CONFIG_IP_SET_HASH_IPPORTNET=m
< CONFIG_IP_SET_HASH_NET=m
< CONFIG_IP_SET_HASH_NETPORT=m
< CONFIG_IP_SET_LIST_SET=m
---
> # CONFIG_IP_SET is not set
831c813
< CONFIG_IP_VS_IPV6=y
---
> # CONFIG_IP_VS_IPV6 is not set
886d867
< CONFIG_NF_NAT_SNMP_BASIC=m
934c915
< CONFIG_DECNET_NF_GRABULATOR=m
---
> # CONFIG_DECNET_NF_GRABULATOR is not set
964,967c945,951
< CONFIG_IP_DCCP_CCID3=y
< # CONFIG_IP_DCCP_CCID3_DEBUG is not set
< CONFIG_IP_DCCP_TFRC_LIB=y
< CONFIG_IP_SCTP=y
---
> # CONFIG_IP_DCCP_CCID3 is not set
> 
> #
> # DCCP Kernel Hacking
> #
> # CONFIG_IP_DCCP_DEBUG is not set
> CONFIG_IP_SCTP=m
978,980c962
< CONFIG_TIPC_ADVANCED=y
< CONFIG_TIPC_PORTS=8191
< CONFIG_TIPC_LOG=0
---
> # CONFIG_TIPC_ADVANCED is not set
982,983c964,965
< CONFIG_ATM=y
< CONFIG_ATM_CLIP=y
---
> CONFIG_ATM=m
> CONFIG_ATM_CLIP=m
985,986c967,968
< CONFIG_ATM_LANE=y
< CONFIG_ATM_MPOA=y
---
> CONFIG_ATM_LANE=m
> CONFIG_ATM_MPOA=m
990c972
< # CONFIG_L2TP_DEBUGFS is not set
---
> CONFIG_L2TP_DEBUGFS=m
998,1006c980
< CONFIG_NET_DSA=y
< CONFIG_NET_DSA_TAG_DSA=y
< CONFIG_NET_DSA_TAG_EDSA=y
< CONFIG_NET_DSA_TAG_TRAILER=y
< CONFIG_NET_DSA_MV88E6XXX=y
< CONFIG_NET_DSA_MV88E6060=y
< CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
< CONFIG_NET_DSA_MV88E6131=y
< CONFIG_NET_DSA_MV88E6123_61_65=y
---
> # CONFIG_NET_DSA is not set
1010,1011c984,985
< CONFIG_DECNET_ROUTER=y
< CONFIG_LLC=y
---
> # CONFIG_DECNET_ROUTER is not set
> CONFIG_LLC=m
1014c988
< CONFIG_IPX_INTERN=y
---
> # CONFIG_IPX_INTERN is not set
1024,1030c998,1002
< CONFIG_X25=m
< CONFIG_LAPB=m
< CONFIG_ECONET=m
< CONFIG_ECONET_AUNUDP=y
< CONFIG_ECONET_NATIVE=y
< CONFIG_WAN_ROUTER=y
< CONFIG_PHONET=m
---
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> CONFIG_WAN_ROUTER=m
> # CONFIG_PHONET is not set
1065c1037
< CONFIG_CLS_U32_PERF=y
---
> # CONFIG_CLS_U32_PERF is not set
1070,1071c1042,1049
< # CONFIG_NET_CLS_CGROUP is not set
< # CONFIG_NET_EMATCH is not set
---
> CONFIG_NET_CLS_CGROUP=y
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=m
> CONFIG_NET_EMATCH_NBYTE=m
> CONFIG_NET_EMATCH_U32=m
> CONFIG_NET_EMATCH_META=m
> CONFIG_NET_EMATCH_TEXT=m
1083c1061
< CONFIG_NET_CLS_IND=y
---
> # CONFIG_NET_CLS_IND is not set
1085c1063
< CONFIG_DCB=y
---
> # CONFIG_DCB is not set
1104c1082
< CONFIG_AX25_DAMA_SLAVE=y
---
> # CONFIG_AX25_DAMA_SLAVE is not set
1132,1133c1110
< CONFIG_CAN_CALC_BITTIMING=y
< CONFIG_CAN_MCP251X=m
---
> # CONFIG_CAN_CALC_BITTIMING is not set
1143,1144c1120
< CONFIG_CAN_C_CAN=m
< CONFIG_CAN_C_CAN_PLATFORM=m
---
> # CONFIG_CAN_C_CAN is not set
1162c1138
< CONFIG_IRDA_ULTRA=y
---
> # CONFIG_IRDA_ULTRA is not set
1212,1220c1188,1189
< CONFIG_BT_L2CAP=y
< CONFIG_BT_SCO=y
< CONFIG_BT_RFCOMM=m
< CONFIG_BT_RFCOMM_TTY=y
< CONFIG_BT_BNEP=m
< CONFIG_BT_BNEP_MC_FILTER=y
< CONFIG_BT_BNEP_PROTO_FILTER=y
< CONFIG_BT_CMTP=m
< CONFIG_BT_HIDP=m
---
> # CONFIG_BT_L2CAP is not set
> # CONFIG_BT_SCO is not set
1243,1244c1212,1213
< CONFIG_BT_WILINK=m
< CONFIG_AF_RXRPC=y
---
> # CONFIG_BT_WILINK is not set
> CONFIG_AF_RXRPC=m
1263,1266c1232,1235
< CONFIG_LIB80211=y
< CONFIG_LIB80211_CRYPT_WEP=y
< CONFIG_LIB80211_CRYPT_CCMP=y
< CONFIG_LIB80211_CRYPT_TKIP=y
---
> CONFIG_LIB80211=m
> CONFIG_LIB80211_CRYPT_WEP=m
> CONFIG_LIB80211_CRYPT_CCMP=m
> CONFIG_LIB80211_CRYPT_TKIP=m
1270d1238
< CONFIG_MAC80211_RC_PID=y
1273d1240
< # CONFIG_MAC80211_RC_DEFAULT_PID is not set
1282c1249
< CONFIG_RFKILL=y
---
> CONFIG_RFKILL=m
1289,1292c1256,1257
< CONFIG_CAIF=m
< # CONFIG_CAIF_DEBUG is not set
< CONFIG_CAIF_NETDEV=m
< CONFIG_CEPH_LIB=y
---
> # CONFIG_CAIF is not set
> CONFIG_CEPH_LIB=m
1309a1275,1276
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
1312,1314c1279,1280
< CONFIG_CONNECTOR=y
< CONFIG_PROC_EVENTS=y
< CONFIG_MTD=y
---
> CONFIG_CONNECTOR=m
> CONFIG_MTD=m
1318c1284
< CONFIG_MTD_REDBOOT_PARTS=y
---
> CONFIG_MTD_REDBOOT_PARTS=m
1320c1286
< CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
---
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
1322,1324c1288
< CONFIG_MTD_CMDLINE_PARTS=y
< CONFIG_MTD_OF_PARTS=y
< CONFIG_MTD_AR7_PARTS=y
---
> CONFIG_MTD_AR7_PARTS=m
1329c1293
< CONFIG_MTD_CHAR=y
---
> CONFIG_MTD_CHAR=m
1331,1334c1295,1299
< CONFIG_MTD_BLKDEVS=y
< CONFIG_MTD_BLOCK=y
< CONFIG_FTL=y
< CONFIG_NFTL=y
---
> CONFIG_MTD_BLKDEVS=m
> CONFIG_MTD_BLOCK=m
> CONFIG_MTD_BLOCK_RO=m
> CONFIG_FTL=m
> CONFIG_NFTL=m
1336,1341c1301,1306
< CONFIG_INFTL=y
< CONFIG_RFD_FTL=y
< CONFIG_SSFDC=y
< CONFIG_SM_FTL=y
< CONFIG_MTD_OOPS=y
< CONFIG_MTD_SWAP=y
---
> CONFIG_INFTL=m
> CONFIG_RFD_FTL=m
> CONFIG_SSFDC=m
> CONFIG_SM_FTL=m
> CONFIG_MTD_OOPS=m
> # CONFIG_MTD_SWAP is not set
1346,1348c1311,1313
< CONFIG_MTD_CFI=y
< CONFIG_MTD_JEDECPROBE=y
< CONFIG_MTD_GEN_PROBE=y
---
> CONFIG_MTD_CFI=m
> CONFIG_MTD_JEDECPROBE=m
> CONFIG_MTD_GEN_PROBE=m
1365,1371c1330,1336
< CONFIG_MTD_CFI_INTELEXT=y
< CONFIG_MTD_CFI_AMDSTD=y
< CONFIG_MTD_CFI_STAA=y
< CONFIG_MTD_CFI_UTIL=y
< CONFIG_MTD_RAM=y
< CONFIG_MTD_ROM=y
< CONFIG_MTD_ABSENT=y
---
> CONFIG_MTD_CFI_INTELEXT=m
> CONFIG_MTD_CFI_AMDSTD=m
> CONFIG_MTD_CFI_STAA=m
> CONFIG_MTD_CFI_UTIL=m
> CONFIG_MTD_RAM=m
> CONFIG_MTD_ROM=m
> CONFIG_MTD_ABSENT=m
1377,1401c1342,1362
< CONFIG_MTD_PHYSMAP=y
< CONFIG_MTD_PHYSMAP_COMPAT=y
< CONFIG_MTD_PHYSMAP_START=0x8000000
< CONFIG_MTD_PHYSMAP_LEN=0
< CONFIG_MTD_PHYSMAP_BANKWIDTH=2
< CONFIG_MTD_PHYSMAP_OF=y
< CONFIG_MTD_SC520CDP=y
< CONFIG_MTD_NETSC520=y
< CONFIG_MTD_TS5500=y
< CONFIG_MTD_SBC_GXX=y
< CONFIG_MTD_SCx200_DOCFLASH=y
< CONFIG_MTD_AMD76XROM=y
< CONFIG_MTD_ICHXROM=y
< CONFIG_MTD_ESB2ROM=y
< CONFIG_MTD_CK804XROM=y
< CONFIG_MTD_SCB2_FLASH=y
< CONFIG_MTD_NETtel=y
< CONFIG_MTD_L440GX=y
< CONFIG_MTD_PCI=y
< CONFIG_MTD_PCMCIA=y
< CONFIG_MTD_PCMCIA_ANONYMOUS=y
< CONFIG_MTD_GPIO_ADDR=y
< CONFIG_MTD_INTEL_VR_NOR=y
< CONFIG_MTD_PLATRAM=y
< CONFIG_MTD_LATCH_ADDR=y
---
> CONFIG_MTD_PHYSMAP=m
> # CONFIG_MTD_PHYSMAP_COMPAT is not set
> CONFIG_MTD_SC520CDP=m
> CONFIG_MTD_NETSC520=m
> CONFIG_MTD_TS5500=m
> CONFIG_MTD_SBC_GXX=m
> CONFIG_MTD_SCx200_DOCFLASH=m
> CONFIG_MTD_AMD76XROM=m
> CONFIG_MTD_ICHXROM=m
> CONFIG_MTD_ESB2ROM=m
> CONFIG_MTD_CK804XROM=m
> CONFIG_MTD_SCB2_FLASH=m
> CONFIG_MTD_NETtel=m
> CONFIG_MTD_L440GX=m
> CONFIG_MTD_PCI=m
> CONFIG_MTD_PCMCIA=m
> # CONFIG_MTD_PCMCIA_ANONYMOUS is not set
> CONFIG_MTD_GPIO_ADDR=m
> CONFIG_MTD_INTEL_VR_NOR=m
> CONFIG_MTD_PLATRAM=m
> # CONFIG_MTD_LATCH_ADDR is not set
1406c1367
< CONFIG_MTD_PMC551=y
---
> CONFIG_MTD_PMC551=m
1409,1417c1370,1372
< CONFIG_MTD_DATAFLASH=y
< CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
< CONFIG_MTD_DATAFLASH_OTP=y
< CONFIG_MTD_M25P80=y
< CONFIG_M25PXX_USE_FAST_READ=y
< CONFIG_MTD_SST25L=y
< CONFIG_MTD_SLRAM=y
< CONFIG_MTD_PHRAM=y
< CONFIG_MTD_MTDRAM=y
---
> CONFIG_MTD_SLRAM=m
> CONFIG_MTD_PHRAM=m
> CONFIG_MTD_MTDRAM=m
1420,1421c1375
< CONFIG_MTDRAM_ABS_POS=0
< CONFIG_MTD_BLOCK2MTD=y
---
> CONFIG_MTD_BLOCK2MTD=m
1426,1430c1380,1384
< CONFIG_MTD_DOC2000=y
< CONFIG_MTD_DOC2001=y
< CONFIG_MTD_DOC2001PLUS=y
< CONFIG_MTD_DOCPROBE=y
< CONFIG_MTD_DOCECC=y
---
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> CONFIG_MTD_DOC2001PLUS=m
> CONFIG_MTD_DOCPROBE=m
> CONFIG_MTD_DOCECC=m
1435c1389
< CONFIG_MTD_NAND_ECC=y
---
> CONFIG_MTD_NAND_ECC=m
1437c1391
< CONFIG_MTD_NAND=y
---
> CONFIG_MTD_NAND=m
1439,1440c1393
< CONFIG_MTD_NAND_BCH=y
< CONFIG_MTD_NAND_ECC_BCH=y
---
> # CONFIG_MTD_NAND_ECC_BCH is not set
1443c1396
< CONFIG_MTD_NAND_DENALI=y
---
> CONFIG_MTD_NAND_DENALI=m
1445c1398
< CONFIG_MTD_NAND_IDS=y
---
> CONFIG_MTD_NAND_IDS=m
1447c1400
< CONFIG_MTD_NAND_DISKONCHIP=y
---
> CONFIG_MTD_NAND_DISKONCHIP=m
1452,1457c1405,1410
< CONFIG_MTD_NAND_CAFE=y
< CONFIG_MTD_NAND_CS553X=y
< CONFIG_MTD_NAND_NANDSIM=y
< CONFIG_MTD_NAND_PLATFORM=y
< CONFIG_MTD_ALAUDA=y
< CONFIG_MTD_ONENAND=y
---
> CONFIG_MTD_NAND_CAFE=m
> CONFIG_MTD_NAND_CS553X=m
> CONFIG_MTD_NAND_NANDSIM=m
> CONFIG_MTD_NAND_PLATFORM=m
> CONFIG_MTD_ALAUDA=m
> CONFIG_MTD_ONENAND=m
1459c1412
< CONFIG_MTD_ONENAND_GENERIC=y
---
> CONFIG_MTD_ONENAND_GENERIC=m
1462c1415
< CONFIG_MTD_ONENAND_SIM=y
---
> CONFIG_MTD_ONENAND_SIM=m
1467,1469c1420,1422
< CONFIG_MTD_LPDDR=y
< CONFIG_MTD_QINFO_PROBE=y
< CONFIG_MTD_UBI=y
---
> CONFIG_MTD_LPDDR=m
> CONFIG_MTD_QINFO_PROBE=m
> CONFIG_MTD_UBI=m
1472c1425
< CONFIG_MTD_UBI_GLUEBI=y
---
> CONFIG_MTD_UBI_GLUEBI=m
1474,1495c1427,1432
< CONFIG_OF=y
< 
< #
< # Device Tree and Open Firmware support
< #
< CONFIG_PROC_DEVICETREE=y
< CONFIG_OF_PROMTREE=y
< CONFIG_OF_ADDRESS=y
< CONFIG_OF_IRQ=y
< CONFIG_OF_DEVICE=y
< CONFIG_OF_GPIO=y
< CONFIG_OF_I2C=y
< CONFIG_OF_NET=y
< CONFIG_OF_SPI=y
< CONFIG_OF_MDIO=y
< CONFIG_OF_PCI=y
< CONFIG_PARPORT=y
< CONFIG_PARPORT_PC=y
< CONFIG_PARPORT_SERIAL=y
< CONFIG_PARPORT_PC_FIFO=y
< CONFIG_PARPORT_PC_SUPERIO=y
< CONFIG_PARPORT_PC_PCMCIA=y
---
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_SERIAL=m
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> CONFIG_PARPORT_PC_PCMCIA=m
1497c1434
< CONFIG_PARPORT_AX88796=y
---
> CONFIG_PARPORT_AX88796=m
1507,1508c1444
< CONFIG_PNPBIOS=y
< CONFIG_PNPBIOS_PROC_FS=y
---
> # CONFIG_PNPBIOS is not set
1512,1513c1448,1449
< CONFIG_BLK_DEV_XD=y
< CONFIG_PARIDE=y
---
> CONFIG_BLK_DEV_XD=m
> CONFIG_PARIDE=m
1518,1522c1454,1458
< CONFIG_PARIDE_PD=y
< CONFIG_PARIDE_PCD=y
< CONFIG_PARIDE_PF=y
< CONFIG_PARIDE_PT=y
< CONFIG_PARIDE_PG=y
---
> CONFIG_PARIDE_PD=m
> CONFIG_PARIDE_PCD=m
> CONFIG_PARIDE_PF=m
> CONFIG_PARIDE_PT=m
> CONFIG_PARIDE_PG=m
1527,1534c1463,1470
< CONFIG_PARIDE_ATEN=y
< CONFIG_PARIDE_BPCK=y
< CONFIG_PARIDE_BPCK6=y
< CONFIG_PARIDE_COMM=y
< CONFIG_PARIDE_DSTR=y
< CONFIG_PARIDE_FIT2=y
< CONFIG_PARIDE_FIT3=y
< CONFIG_PARIDE_EPAT=y
---
> CONFIG_PARIDE_ATEN=m
> CONFIG_PARIDE_BPCK=m
> CONFIG_PARIDE_BPCK6=m
> CONFIG_PARIDE_COMM=m
> CONFIG_PARIDE_DSTR=m
> CONFIG_PARIDE_FIT2=m
> CONFIG_PARIDE_FIT3=m
> CONFIG_PARIDE_EPAT=m
1536,1542c1472,1478
< CONFIG_PARIDE_EPIA=y
< CONFIG_PARIDE_FRIQ=y
< CONFIG_PARIDE_FRPW=y
< CONFIG_PARIDE_KBIC=y
< CONFIG_PARIDE_KTTI=y
< CONFIG_PARIDE_ON20=y
< CONFIG_PARIDE_ON26=y
---
> CONFIG_PARIDE_EPIA=m
> CONFIG_PARIDE_FRIQ=m
> CONFIG_PARIDE_FRPW=m
> CONFIG_PARIDE_KBIC=m
> CONFIG_PARIDE_KTTI=m
> CONFIG_PARIDE_ON20=m
> CONFIG_PARIDE_ON26=m
1547c1483
< CONFIG_BLK_DEV_UMEM=y
---
> CONFIG_BLK_DEV_UMEM=m
1549,1551c1485,1487
< CONFIG_BLK_DEV_LOOP=y
< CONFIG_BLK_DEV_CRYPTOLOOP=y
< CONFIG_BLK_DEV_DRBD=y
---
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_CRYPTOLOOP=m
> CONFIG_BLK_DEV_DRBD=m
1553,1554c1489,1490
< CONFIG_BLK_DEV_NBD=y
< CONFIG_BLK_DEV_OSD=y
---
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_OSD=m
1556c1492
< CONFIG_BLK_DEV_UB=y
---
> # CONFIG_BLK_DEV_UB is not set
1560,1561c1496,1497
< CONFIG_BLK_DEV_XIP=y
< CONFIG_CDROM_PKTCDVD=y
---
> # CONFIG_BLK_DEV_XIP is not set
> CONFIG_CDROM_PKTCDVD=m
1563,1568c1499,1504
< CONFIG_CDROM_PKTCDVD_WCACHE=y
< CONFIG_ATA_OVER_ETH=y
< CONFIG_VIRTIO_BLK=y
< CONFIG_BLK_DEV_HD=y
< CONFIG_BLK_DEV_RBD=y
< CONFIG_SENSORS_LIS3LV02D=y
---
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> CONFIG_ATA_OVER_ETH=m
> CONFIG_VIRTIO_BLK=m
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_RBD=m
> CONFIG_SENSORS_LIS3LV02D=m
1572,1579c1508,1514
< CONFIG_AD525X_DPOT_SPI=m
< CONFIG_IBM_ASM=y
< CONFIG_PHANTOM=y
< CONFIG_SGI_IOC4=y
< CONFIG_TIFM_CORE=y
< CONFIG_TIFM_7XX1=y
< CONFIG_ICS932S401=y
< CONFIG_ENCLOSURE_SERVICES=y
---
> CONFIG_IBM_ASM=m
> CONFIG_PHANTOM=m
> CONFIG_SGI_IOC4=m
> CONFIG_TIFM_CORE=m
> CONFIG_TIFM_7XX1=m
> CONFIG_ICS932S401=m
> CONFIG_ENCLOSURE_SERVICES=m
1583c1518
< CONFIG_HP_ILO=y
---
> CONFIG_HP_ILO=m
1585,1586c1520,1521
< CONFIG_ISL29003=y
< CONFIG_ISL29020=y
---
> CONFIG_ISL29003=m
> CONFIG_ISL29020=m
1593d1527
< CONFIG_TI_DAC7512=m
1597,1598c1531
< CONFIG_C2PORT=y
< CONFIG_C2PORT_DURAMAR_2150=y
---
> # CONFIG_C2PORT is not set
1603,1608c1536,1540
< CONFIG_EEPROM_AT24=y
< CONFIG_EEPROM_AT25=y
< CONFIG_EEPROM_LEGACY=y
< CONFIG_EEPROM_MAX6875=y
< CONFIG_EEPROM_93CX6=y
< CONFIG_CB710_CORE=y
---
> CONFIG_EEPROM_AT24=m
> CONFIG_EEPROM_LEGACY=m
> CONFIG_EEPROM_MAX6875=m
> CONFIG_EEPROM_93CX6=m
> CONFIG_CB710_CORE=m
1621,1704c1553
< CONFIG_IDE=y
< 
< #
< # Please see Documentation/ide/ide.txt for help/info on 
IDE drives
< #
< CONFIG_IDE_XFER_MODE=y
< CONFIG_IDE_TIMINGS=y
< CONFIG_IDE_ATAPI=y
< CONFIG_IDE_LEGACY=y
< # CONFIG_BLK_DEV_IDE_SATA is not set
< CONFIG_IDE_GD=y
< CONFIG_IDE_GD_ATA=y
< CONFIG_IDE_GD_ATAPI=y
< CONFIG_BLK_DEV_IDECS=y
< CONFIG_BLK_DEV_DELKIN=y
< CONFIG_BLK_DEV_IDECD=y
< CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
< CONFIG_BLK_DEV_IDETAPE=y
< CONFIG_BLK_DEV_IDEACPI=y
< CONFIG_IDE_TASK_IOCTL=y
< CONFIG_IDE_PROC_FS=y
< 
< #
< # IDE chipset support/bugfixes
< #
< CONFIG_IDE_GENERIC=y
< CONFIG_BLK_DEV_PLATFORM=y
< CONFIG_BLK_DEV_CMD640=y
< CONFIG_BLK_DEV_CMD640_ENHANCED=y
< CONFIG_BLK_DEV_IDEPNP=y
< CONFIG_BLK_DEV_IDEDMA_SFF=y
< 
< #
< # PCI IDE chipsets support
< #
< CONFIG_BLK_DEV_IDEPCI=y
< # CONFIG_IDEPCI_PCIBUS_ORDER is not set
< # CONFIG_BLK_DEV_OFFBOARD is not set
< CONFIG_BLK_DEV_GENERIC=y
< CONFIG_BLK_DEV_OPTI621=y
< CONFIG_BLK_DEV_RZ1000=y
< CONFIG_BLK_DEV_IDEDMA_PCI=y
< CONFIG_BLK_DEV_AEC62XX=y
< CONFIG_BLK_DEV_ALI15X3=y
< CONFIG_BLK_DEV_AMD74XX=y
< CONFIG_BLK_DEV_ATIIXP=y
< CONFIG_BLK_DEV_CMD64X=y
< CONFIG_BLK_DEV_TRIFLEX=y
< CONFIG_BLK_DEV_CS5520=y
< CONFIG_BLK_DEV_CS5530=y
< CONFIG_BLK_DEV_CS5535=y
< CONFIG_BLK_DEV_CS5536=y
< CONFIG_BLK_DEV_HPT366=y
< CONFIG_BLK_DEV_JMICRON=y
< CONFIG_BLK_DEV_SC1200=y
< CONFIG_BLK_DEV_PIIX=y
< CONFIG_BLK_DEV_IT8172=y
< CONFIG_BLK_DEV_IT8213=y
< CONFIG_BLK_DEV_IT821X=y
< CONFIG_BLK_DEV_NS87415=y
< CONFIG_BLK_DEV_PDC202XX_OLD=y
< CONFIG_BLK_DEV_PDC202XX_NEW=y
< CONFIG_BLK_DEV_SVWKS=y
< CONFIG_BLK_DEV_SIIMAGE=y
< CONFIG_BLK_DEV_SIS5513=y
< CONFIG_BLK_DEV_SLC90E66=y
< CONFIG_BLK_DEV_TRM290=y
< CONFIG_BLK_DEV_VIA82CXXX=y
< CONFIG_BLK_DEV_TC86C001=y
< 
< #
< # Other IDE chipsets support
< #
< 
< #
< # Note: most of these also require special kernel boot 
parameters
< #
< CONFIG_BLK_DEV_4DRIVES=y
< CONFIG_BLK_DEV_ALI14XX=y
< CONFIG_BLK_DEV_DTC2278=y
< CONFIG_BLK_DEV_HT6560B=y
< CONFIG_BLK_DEV_QD65XX=y
< CONFIG_BLK_DEV_UMC8672=y
< CONFIG_BLK_DEV_IDEDMA=y
---
> # CONFIG_IDE is not set
1722c1571
< CONFIG_CHR_DEV_OSST=y
---
> CONFIG_CHR_DEV_OSST=m
1725,1727c1574,1576
< CONFIG_CHR_DEV_SG=y
< CONFIG_CHR_DEV_SCH=y
< CONFIG_SCSI_ENCLOSURE=y
---
> CONFIG_CHR_DEV_SG=m
> CONFIG_CHR_DEV_SCH=m
> CONFIG_SCSI_ENCLOSURE=m
1729,1731c1578,1580
< CONFIG_SCSI_CONSTANTS=y
< CONFIG_SCSI_LOGGING=y
< CONFIG_SCSI_SCAN_ASYNC=y
---
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> # CONFIG_SCSI_SCAN_ASYNC is not set
1745c1594
< CONFIG_SCSI_SRP_ATTRS=y
---
> CONFIG_SCSI_SRP_ATTRS=m
1748,1754c1597,1603
< CONFIG_ISCSI_TCP=y
< CONFIG_ISCSI_BOOT_SYSFS=y
< CONFIG_SCSI_CXGB3_ISCSI=y
< CONFIG_SCSI_CXGB4_ISCSI=y
< CONFIG_SCSI_BNX2_ISCSI=y
< CONFIG_SCSI_BNX2X_FCOE=y
< CONFIG_BE2ISCSI=y
---
> CONFIG_ISCSI_TCP=m
> CONFIG_ISCSI_BOOT_SYSFS=m
> CONFIG_SCSI_CXGB3_ISCSI=m
> CONFIG_SCSI_CXGB4_ISCSI=m
> CONFIG_SCSI_BNX2_ISCSI=m
> # CONFIG_SCSI_BNX2X_FCOE is not set
> CONFIG_BE2ISCSI=m
1763d1611
< CONFIG_SCSI_AHA1740=y
1781,1782c1629,1630
< CONFIG_SCSI_MVSAS_DEBUG=y
< CONFIG_SCSI_DPT_I2O=y
---
> # CONFIG_SCSI_MVSAS_DEBUG is not set
> CONFIG_SCSI_DPT_I2O=m
1786c1634
< CONFIG_SCSI_ARCMSR_AER=y
---
> # CONFIG_SCSI_ARCMSR_AER is not set
1794c1642
< CONFIG_SCSI_MPT2SAS_LOGGING=y
---
> # CONFIG_SCSI_MPT2SAS_LOGGING is not set
1798c1646
< CONFIG_VMWARE_PVSCSI=y
---
> CONFIG_VMWARE_PVSCSI=m
1806,1807c1654,1655
< CONFIG_SCSI_EATA_TAGGED_QUEUE=y
< CONFIG_SCSI_EATA_LINKED_COMMANDS=y
---
> # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
> # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
1810d1657
< CONFIG_SCSI_FD_MCS=y
1812,1813c1659,1660
< CONFIG_SCSI_GENERIC_NCR5380=y
< CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
---
> CONFIG_SCSI_GENERIC_NCR5380=m
> CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
1815,1817d1661
< CONFIG_SCSI_IBMMCA=y
< CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
< CONFIG_IBMMCA_SCSI_DEV_RESET=y
1821,1823c1665,1667
< CONFIG_SCSI_PPA=y
< CONFIG_SCSI_IMM=y
< CONFIG_SCSI_IZIP_EPP16=y
---
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> # CONFIG_SCSI_IZIP_EPP16 is not set
1825,1826c1669
< CONFIG_SCSI_NCR53C406A=y
< CONFIG_SCSI_NCR_D700=y
---
> CONFIG_SCSI_NCR53C406A=m
1834,1840c1677,1679
< CONFIG_SCSI_IPR_TRACE=y
< CONFIG_SCSI_IPR_DUMP=y
< CONFIG_SCSI_NCR_Q720=y
< CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
< CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
< CONFIG_SCSI_NCR53C8XX_SYNC=20
< CONFIG_SCSI_PAS16=y
---
> # CONFIG_SCSI_IPR_TRACE is not set
> # CONFIG_SCSI_IPR_DUMP is not set
> CONFIG_SCSI_PAS16=m
1846,1847c1685
< CONFIG_SCSI_LPFC_DEBUG_FS=y
< CONFIG_SCSI_SIM710=y
---
> # CONFIG_SCSI_LPFC_DEBUG_FS is not set
1852,1854c1690,1692
< CONFIG_SCSI_U14_34F=y
< CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
< CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
---
> CONFIG_SCSI_U14_34F=m
> # CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
> # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
1857,1858c1695,1696
< CONFIG_SCSI_NSP32=y
< # CONFIG_SCSI_DEBUG is not set
---
> CONFIG_SCSI_NSP32=m
> CONFIG_SCSI_DEBUG=m
1869,1875c1707,1713
< CONFIG_SCSI_DH=y
< CONFIG_SCSI_DH_RDAC=y
< CONFIG_SCSI_DH_HP_SW=y
< CONFIG_SCSI_DH_EMC=y
< CONFIG_SCSI_DH_ALUA=y
< CONFIG_SCSI_OSD_INITIATOR=y
< CONFIG_SCSI_OSD_ULD=y
---
> CONFIG_SCSI_DH=m
> CONFIG_SCSI_DH_RDAC=m
> CONFIG_SCSI_DH_HP_SW=m
> CONFIG_SCSI_DH_EMC=m
> CONFIG_SCSI_DH_ALUA=m
> CONFIG_SCSI_OSD_INITIATOR=m
> CONFIG_SCSI_OSD_ULD=m
1921c1759
< CONFIG_PATA_ARASAN_CF=y
---
> # CONFIG_PATA_ARASAN_CF is not set
1955c1793
< CONFIG_PATA_TOSHIBA=y
---
> CONFIG_PATA_TOSHIBA=m
1968,1969c1806
< CONFIG_PATA_PCMCIA=y
< CONFIG_PATA_PLATFORM=y
---
> CONFIG_PATA_PCMCIA=m
1988c1825
< CONFIG_MULTICORE_RAID456=y
---
> # CONFIG_MULTICORE_RAID456 is not set
1990c1827
< CONFIG_MD_FAULTY=y
---
> CONFIG_MD_FAULTY=m
1997,2001c1834,1838
< # CONFIG_DM_LOG_USERSPACE is not set
< CONFIG_DM_ZERO=y
< CONFIG_DM_MULTIPATH=y
< # CONFIG_DM_MULTIPATH_QL is not set
< # CONFIG_DM_MULTIPATH_ST is not set
---
> CONFIG_DM_LOG_USERSPACE=m
> CONFIG_DM_ZERO=m
> CONFIG_DM_MULTIPATH=m
> CONFIG_DM_MULTIPATH_QL=m
> CONFIG_DM_MULTIPATH_ST=m
2004c1841
< CONFIG_DM_FLAKEY=y
---
> # CONFIG_DM_FLAKEY is not set
2009,2010c1846
< CONFIG_LOOPBACK_TARGET=m
< # CONFIG_LOOPBACK_TARGET_CDB_DEBUG is not set
---
> # CONFIG_LOOPBACK_TARGET is not set
2018c1854
< CONFIG_FUSION_LOGGING=y
---
> # CONFIG_FUSION_LOGGING is not set
2023,2024c1859,1860
< CONFIG_FIREWIRE=y
< CONFIG_FIREWIRE_OHCI=y
---
> CONFIG_FIREWIRE=m
> CONFIG_FIREWIRE_OHCI=m
2026,2028c1862,1864
< CONFIG_FIREWIRE_SBP2=y
< CONFIG_FIREWIRE_NET=y
< CONFIG_FIREWIRE_NOSY=y
---
> CONFIG_FIREWIRE_SBP2=m
> CONFIG_FIREWIRE_NET=m
> CONFIG_FIREWIRE_NOSY=m
2031a1868
> CONFIG_I2O_EXT_ADAPTEC_DMA64=y
2033c1870
< CONFIG_I2O_CONFIG_OLD_IOCTL=y
---
> # CONFIG_I2O_CONFIG_OLD_IOCTL is not set
2061,2062c1898,1899
< CONFIG_MII=y
< CONFIG_PHYLIB=y
---
> CONFIG_MII=m
> CONFIG_PHYLIB=m
2082d1918
< CONFIG_FIXED_PHY=y
2096,2097d1931
< CONFIG_ELMC=m
< CONFIG_ELMC_II=m
2103d1936
< CONFIG_ULTRAMCA=m
2105d1937
< CONFIG_ULTRA32=m
2107,2108d1938
< CONFIG_ENC28J60=m
< # CONFIG_ENC28J60_WRITEVERIFY is not set
2118c1948
< CONFIG_TULIP_MWI=y
---
> # CONFIG_TULIP_MWI is not set
2120,2121c1950
< CONFIG_TULIP_NAPI=y
< CONFIG_TULIP_NAPI_HW_MITIGATION=y
---
> # CONFIG_TULIP_NAPI is not set
2142,2143d1970
< CONFIG_NE2_MCA=m
< CONFIG_IBMLANA=m
2164,2165c1991
< CONFIG_E100=y
< CONFIG_LNE390=m
---
> CONFIG_E100=m
2169,2170d1994
< CONFIG_NE3210=m
< CONFIG_ES3210=m
2174c1998
< CONFIG_8139TOO_TUNE_TWISTER=y
---
> # CONFIG_8139TOO_TUNE_TWISTER is not set
2185d2008
< CONFIG_KS8851=m
2187c2010
< CONFIG_VIA_RHINE=y
---
> CONFIG_VIA_RHINE=m
2191,2194c2014,2017
< CONFIG_ATP=y
< CONFIG_DE600=y
< CONFIG_DE620=y
< CONFIG_ATL2=y
---
> CONFIG_ATP=m
> CONFIG_DE600=m
> CONFIG_DE620=m
> CONFIG_ATL2=m
2208c2031
< CONFIG_R8169=y
---
> CONFIG_R8169=m
2216,2217c2039,2040
< CONFIG_BNX2=y
< CONFIG_CNIC=y
---
> CONFIG_BNX2=m
> CONFIG_CNIC=m
2224c2047
< CONFIG_STMMAC_DA=y
---
> # CONFIG_STMMAC_DA is not set
2228c2051
< CONFIG_MDIO=y
---
> CONFIG_MDIO=m
2231,2232c2054,2055
< CONFIG_CHELSIO_T3=y
< CONFIG_CHELSIO_T4=y
---
> CONFIG_CHELSIO_T3=m
> CONFIG_CHELSIO_T4=m
2237d2059
< CONFIG_IXGBE_DCB=y
2258c2080
< CONFIG_TR=y
---
> CONFIG_TR=m
2268d2089
< CONFIG_MADGEMC=m
2289c2110
< CONFIG_MAC80211_HWSIM=m
---
> # CONFIG_MAC80211_HWSIM is not set
2306c2127,2129
< # CONFIG_CARL9170 is not set
---
> CONFIG_CARL9170=m
> CONFIG_CARL9170_LEDS=y
> CONFIG_CARL9170_WPC=y
2329c2152
< CONFIG_HOSTAP=y
---
> CONFIG_HOSTAP=m
2352,2353c2175,2176
< CONFIG_IWLWIFI_DEVICE_TRACING=y
< CONFIG_IWL_P2P=y
---
> # CONFIG_IWLWIFI_DEVICE_TRACING is not set
> # CONFIG_IWL_P2P is not set
2365c2188
< CONFIG_IWM_TRACING=y
---
> # CONFIG_IWM_TRACING is not set
2370d2192
< CONFIG_LIBERTAS_SPI=m
2374c2196
< CONFIG_HERMES_PRISM=y
---
> # CONFIG_HERMES_PRISM is not set
2379d2200
< CONFIG_PCI_HERMES=m
2386,2387d2206
< CONFIG_P54_SPI=m
< CONFIG_P54_SPI_DEFAULT_EEPROM=y
2396c2215
< CONFIG_RT2800PCI_RT53XX=y
---
> # CONFIG_RT2800PCI_RT53XX is not set
2413c2232
< CONFIG_RTL8192CU=m
---
> # CONFIG_RTL8192CU is not set
2417d2235
< CONFIG_WL1251_SPI=m
2421,2422c2239
< CONFIG_WL12XX_HT=y
< CONFIG_WL12XX_SPI=m
---
> # CONFIG_WL12XX_HT is not set
2435c2252
< CONFIG_WIMAX_IWMC3200_SDIO=y
---
> # CONFIG_WIMAX_IWMC3200_SDIO is not set
2463,2464c2280,2281
< CONFIG_USB_EPSON2888=y
< CONFIG_USB_KC2190=y
---
> # CONFIG_USB_EPSON2888 is not set
> # CONFIG_USB_KC2190 is not set
2469d2285
< CONFIG_USB_CDC_PHONET=m
2472c2288
< CONFIG_USB_VL600=m
---
> # CONFIG_USB_VL600 is not set
2495c2311,2314
< CONFIG_HDLC_X25=m
---
> 
> #
> # X.25/LAPB support is disabled
> #
2498c2317
< CONFIG_PC300TOO=m
---
> # CONFIG_PC300TOO is not set
2503,2504c2322,2323
< CONFIG_DSCC4_PCISYNC=y
< CONFIG_DSCC4_PCI_RST=y
---
> # CONFIG_DSCC4_PCISYNC is not set
> # CONFIG_DSCC4_PCI_RST is not set
2511,2512d2329
< CONFIG_LAPBETHER=m
< CONFIG_X25_ASY=m
2514c2331
< CONFIG_SBNI_MULTILINE=y
---
> # CONFIG_SBNI_MULTILINE is not set
2516c2333
< # CONFIG_ATM_DUMMY is not set
---
> CONFIG_ATM_DUMMY=m
2527c2344
< CONFIG_ATM_NICSTAR_USE_IDT77105=y
---
> # CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
2539c2356
< CONFIG_ATM_FORE200E_USE_TASKLET=y
---
> # CONFIG_ATM_FORE200E_USE_TASKLET is not set
2551,2556d2367
< CONFIG_CAIF_TTY=m
< CONFIG_CAIF_SPI_SLAVE=m
< CONFIG_CAIF_SPI_SYNC=y
< CONFIG_RIONET=m
< CONFIG_RIONET_TX_SIZE=128
< CONFIG_RIONET_RX_SIZE=128
2564,2565c2375,2376
< CONFIG_PLIP=y
< CONFIG_PPP=y
---
> CONFIG_PLIP=m
> CONFIG_PPP=m
2568,2573c2379,2384
< CONFIG_PPP_ASYNC=y
< CONFIG_PPP_SYNC_TTY=y
< CONFIG_PPP_DEFLATE=y
< CONFIG_PPP_BSDCOMP=y
< CONFIG_PPP_MPPE=y
< CONFIG_PPPOE=y
---
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> CONFIG_PPP_BSDCOMP=m
> CONFIG_PPP_MPPE=m
> CONFIG_PPPOE=m
2575c2386
< CONFIG_PPPOATM=y
---
> CONFIG_PPPOATM=m
2577c2388
< CONFIG_SLIP=y
---
> CONFIG_SLIP=m
2579c2390
< CONFIG_SLHC=y
---
> CONFIG_SLHC=m
2581c2392
< CONFIG_SLIP_MODE_SLIP6=y
---
> # CONFIG_SLIP_MODE_SLIP6 is not set
2586c2397
< CONFIG_NETPOLL_TRAP=y
---
> # CONFIG_NETPOLL_TRAP is not set
2599d2409
< CONFIG_ISDN_X25=y
2712,2713c2522,2523
< CONFIG_GIGASET_CAPI=y
< # CONFIG_GIGASET_I4L is not set
---
> # CONFIG_GIGASET_CAPI is not set
> CONFIG_GIGASET_I4L=y
2717c2527
< CONFIG_GIGASET_M101=m
---
> # CONFIG_GIGASET_M101 is not set
2748,2749c2558,2559
< CONFIG_INPUT_POLLDEV=y
< CONFIG_INPUT_SPARSEKMAP=y
---
> CONFIG_INPUT_POLLDEV=m
> CONFIG_INPUT_SPARSEKMAP=m
2758,2759c2568,2569
< CONFIG_INPUT_JOYDEV=y
< CONFIG_INPUT_EVDEV=y
---
> CONFIG_INPUT_JOYDEV=m
> CONFIG_INPUT_EVDEV=m
2766,2767c2576
< CONFIG_KEYBOARD_ADP5520=y
< CONFIG_KEYBOARD_ADP5588=y
---
> CONFIG_KEYBOARD_ADP5588=m
2769,2786c2578,2592
< CONFIG_KEYBOARD_QT1070=y
< CONFIG_KEYBOARD_QT2160=y
< CONFIG_KEYBOARD_LKKBD=y
< CONFIG_KEYBOARD_GPIO=y
< CONFIG_KEYBOARD_GPIO_POLLED=y
< CONFIG_KEYBOARD_TCA6416=y
< CONFIG_KEYBOARD_MATRIX=y
< CONFIG_KEYBOARD_LM8323=y
< CONFIG_KEYBOARD_MAX7359=y
< CONFIG_KEYBOARD_MCS=y
< CONFIG_KEYBOARD_NEWTON=y
< CONFIG_KEYBOARD_OPENCORES=y
< CONFIG_KEYBOARD_STOWAWAY=y
< CONFIG_KEYBOARD_SUNKBD=y
< CONFIG_KEYBOARD_STMPE=y
< CONFIG_KEYBOARD_TC3589X=y
< CONFIG_KEYBOARD_TWL4030=y
< CONFIG_KEYBOARD_XTKBD=y
---
> # CONFIG_KEYBOARD_QT1070 is not set
> CONFIG_KEYBOARD_QT2160=m
> # CONFIG_KEYBOARD_LKKBD is not set
> CONFIG_KEYBOARD_GPIO=m
> CONFIG_KEYBOARD_GPIO_POLLED=m
> CONFIG_KEYBOARD_TCA6416=m
> CONFIG_KEYBOARD_MATRIX=m
> CONFIG_KEYBOARD_LM8323=m
> CONFIG_KEYBOARD_MAX7359=m
> CONFIG_KEYBOARD_MCS=m
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_KEYBOARD_OPENCORES=m
> CONFIG_KEYBOARD_STOWAWAY=m
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
2788c2594
< CONFIG_MOUSE_PS2=y
---
> CONFIG_MOUSE_PS2=m
2797,2801c2603,2606
< CONFIG_MOUSE_PS2_OLPC=y
< CONFIG_MOUSE_SERIAL=y
< CONFIG_MOUSE_APPLETOUCH=y
< CONFIG_MOUSE_BCM5974=y
< CONFIG_MOUSE_INPORT=y
---
> CONFIG_MOUSE_SERIAL=m
> CONFIG_MOUSE_APPLETOUCH=m
> CONFIG_MOUSE_BCM5974=m
> CONFIG_MOUSE_INPORT=m
2803,2807c2608,2612
< CONFIG_MOUSE_LOGIBM=y
< CONFIG_MOUSE_PC110PAD=y
< CONFIG_MOUSE_VSXXXAA=y
< CONFIG_MOUSE_GPIO=y
< CONFIG_MOUSE_SYNAPTICS_I2C=y
---
> CONFIG_MOUSE_LOGIBM=m
> CONFIG_MOUSE_PC110PAD=m
> CONFIG_MOUSE_VSXXXAA=m
> CONFIG_MOUSE_GPIO=m
> CONFIG_MOUSE_SYNAPTICS_I2C=m
2809c2614
< CONFIG_JOYSTICK_ANALOG=y
---
> CONFIG_JOYSTICK_ANALOG=m
2838c2643
< CONFIG_JOYSTICK_WALKERA0701=m
---
> # CONFIG_JOYSTICK_WALKERA0701 is not set
2840,2845c2645,2650
< CONFIG_TABLET_USB_ACECAD=y
< CONFIG_TABLET_USB_AIPTEK=y
< CONFIG_TABLET_USB_GTCO=y
< CONFIG_TABLET_USB_HANWANG=y
< CONFIG_TABLET_USB_KBTAB=y
< CONFIG_TABLET_USB_WACOM=y
---
> CONFIG_TABLET_USB_ACECAD=m
> CONFIG_TABLET_USB_AIPTEK=m
> CONFIG_TABLET_USB_GTCO=m
> CONFIG_TABLET_USB_HANWANG=m
> CONFIG_TABLET_USB_KBTAB=m
> CONFIG_TABLET_USB_WACOM=m
2847,2871c2652,2671
< CONFIG_TOUCHSCREEN_88PM860X=y
< CONFIG_TOUCHSCREEN_ADS7846=y
< CONFIG_TOUCHSCREEN_AD7877=y
< CONFIG_TOUCHSCREEN_AD7879=y
< CONFIG_TOUCHSCREEN_AD7879_I2C=y
< CONFIG_TOUCHSCREEN_AD7879_SPI=y
< CONFIG_TOUCHSCREEN_ATMEL_MXT=y
< CONFIG_TOUCHSCREEN_BU21013=y
< CONFIG_TOUCHSCREEN_CY8CTMG110=y
< CONFIG_TOUCHSCREEN_DA9034=y
< CONFIG_TOUCHSCREEN_DYNAPRO=y
< CONFIG_TOUCHSCREEN_HAMPSHIRE=y
< CONFIG_TOUCHSCREEN_EETI=y
< CONFIG_TOUCHSCREEN_FUJITSU=y
< CONFIG_TOUCHSCREEN_GUNZE=y
< CONFIG_TOUCHSCREEN_ELO=y
< CONFIG_TOUCHSCREEN_WACOM_W8001=y
< CONFIG_TOUCHSCREEN_MCS5000=y
< CONFIG_TOUCHSCREEN_MTOUCH=y
< CONFIG_TOUCHSCREEN_INEXIO=y
< CONFIG_TOUCHSCREEN_MK712=y
< CONFIG_TOUCHSCREEN_HTCPEN=y
< CONFIG_TOUCHSCREEN_PENMOUNT=y
< CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
< CONFIG_TOUCHSCREEN_TOUCHWIN=y
---
> CONFIG_TOUCHSCREEN_AD7879=m
> CONFIG_TOUCHSCREEN_AD7879_I2C=m
> # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
> CONFIG_TOUCHSCREEN_BU21013=m
> CONFIG_TOUCHSCREEN_CY8CTMG110=m
> CONFIG_TOUCHSCREEN_DYNAPRO=m
> CONFIG_TOUCHSCREEN_HAMPSHIRE=m
> CONFIG_TOUCHSCREEN_EETI=m
> CONFIG_TOUCHSCREEN_FUJITSU=m
> CONFIG_TOUCHSCREEN_GUNZE=m
> CONFIG_TOUCHSCREEN_ELO=m
> CONFIG_TOUCHSCREEN_WACOM_W8001=m
> CONFIG_TOUCHSCREEN_MCS5000=m
> CONFIG_TOUCHSCREEN_MTOUCH=m
> CONFIG_TOUCHSCREEN_INEXIO=m
> CONFIG_TOUCHSCREEN_MK712=m
> CONFIG_TOUCHSCREEN_HTCPEN=m
> CONFIG_TOUCHSCREEN_PENMOUNT=m
> CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
> CONFIG_TOUCHSCREEN_TOUCHWIN=m
2873d2672
< CONFIG_TOUCHSCREEN_WM831X=y
2878,2879c2677
< CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
< CONFIG_TOUCHSCREEN_MC13783=m
---
> CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
2896,2902c2694,2697
< CONFIG_TOUCHSCREEN_TOUCHIT213=y
< CONFIG_TOUCHSCREEN_TSC2005=y
< CONFIG_TOUCHSCREEN_TSC2007=y
< CONFIG_TOUCHSCREEN_PCAP=y
< CONFIG_TOUCHSCREEN_ST1232=y
< CONFIG_TOUCHSCREEN_STMPE=y
< CONFIG_TOUCHSCREEN_TPS6507X=y
---
> CONFIG_TOUCHSCREEN_TOUCHIT213=m
> CONFIG_TOUCHSCREEN_TSC2007=m
> CONFIG_TOUCHSCREEN_ST1232=m
> CONFIG_TOUCHSCREEN_TPS6507X=m
2904,2922c2699,2711
< CONFIG_INPUT_88PM860X_ONKEY=y
< CONFIG_INPUT_AB8500_PONKEY=y
< CONFIG_INPUT_AD714X=y
< CONFIG_INPUT_AD714X_I2C=y
< CONFIG_INPUT_AD714X_SPI=y
< CONFIG_INPUT_PCSPKR=y
< CONFIG_INPUT_MAX8925_ONKEY=y
< CONFIG_INPUT_APANEL=y
< CONFIG_INPUT_WISTRON_BTNS=y
< CONFIG_INPUT_ATLAS_BTNS=y
< CONFIG_INPUT_ATI_REMOTE=y
< CONFIG_INPUT_ATI_REMOTE2=y
< CONFIG_INPUT_KEYSPAN_REMOTE=y
< CONFIG_INPUT_POWERMATE=y
< CONFIG_INPUT_YEALINK=y
< CONFIG_INPUT_CM109=y
< CONFIG_INPUT_TWL4030_PWRBUTTON=y
< CONFIG_INPUT_TWL4030_VIBRA=y
< CONFIG_INPUT_UINPUT=y
---
> CONFIG_INPUT_AD714X=m
> CONFIG_INPUT_AD714X_I2C=m
> CONFIG_INPUT_PCSPKR=m
> CONFIG_INPUT_APANEL=m
> CONFIG_INPUT_WISTRON_BTNS=m
> CONFIG_INPUT_ATLAS_BTNS=m
> CONFIG_INPUT_ATI_REMOTE=m
> CONFIG_INPUT_ATI_REMOTE2=m
> CONFIG_INPUT_KEYSPAN_REMOTE=m
> CONFIG_INPUT_POWERMATE=m
> CONFIG_INPUT_YEALINK=m
> CONFIG_INPUT_CM109=m
> CONFIG_INPUT_UINPUT=m
2924,2932c2713,2718
< CONFIG_INPUT_PCF8574=y
< CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
< CONFIG_INPUT_WM831X_ON=y
< CONFIG_INPUT_PCAP=y
< CONFIG_INPUT_ADXL34X=y
< CONFIG_INPUT_ADXL34X_I2C=y
< CONFIG_INPUT_ADXL34X_SPI=y
< CONFIG_INPUT_CMA3000=y
< CONFIG_INPUT_CMA3000_I2C=y
---
> CONFIG_INPUT_PCF8574=m
> CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
> CONFIG_INPUT_ADXL34X=m
> CONFIG_INPUT_ADXL34X_I2C=m
> CONFIG_INPUT_CMA3000=m
> CONFIG_INPUT_CMA3000_I2C=m
2939,2942c2725,2728
< CONFIG_SERIO_SERPORT=y
< CONFIG_SERIO_CT82C710=y
< CONFIG_SERIO_PARKBD=y
< CONFIG_SERIO_PCIPS2=y
---
> CONFIG_SERIO_SERPORT=m
> CONFIG_SERIO_CT82C710=m
> CONFIG_SERIO_PARKBD=m
> CONFIG_SERIO_PCIPS2=m
2944,2951c2730,2737
< CONFIG_SERIO_RAW=y
< CONFIG_SERIO_ALTERA_PS2=y
< CONFIG_SERIO_PS2MULT=y
< CONFIG_GAMEPORT=y
< CONFIG_GAMEPORT_NS558=y
< CONFIG_GAMEPORT_L4=y
< CONFIG_GAMEPORT_EMU10K1=y
< CONFIG_GAMEPORT_FM801=y
---
> CONFIG_SERIO_RAW=m
> CONFIG_SERIO_ALTERA_PS2=m
> CONFIG_SERIO_PS2MULT=m
> CONFIG_GAMEPORT=m
> CONFIG_GAMEPORT_NS558=m
> CONFIG_GAMEPORT_L4=m
> CONFIG_GAMEPORT_EMU10K1=m
> CONFIG_GAMEPORT_FM801=m
2964c2750
< CONFIG_LEGACY_PTY_COUNT=256
---
> CONFIG_LEGACY_PTY_COUNT=32
2968c2754
< CONFIG_CYZ_INTR=y
---
> # CONFIG_CYZ_INTR is not set
3002d2787
< CONFIG_SERIAL_8250_MCA=m
3007,3009d2791
< CONFIG_SERIAL_MAX3100=m
< CONFIG_SERIAL_MAX3107=m
< CONFIG_SERIAL_MRST_MAX3110=m
3015d2796
< CONFIG_SERIAL_OF_PLATFORM=m
3021d2801
< CONFIG_SERIAL_IFX6X60=m
3023,3024c2803
< CONFIG_TTY_PRINTK=y
< CONFIG_PRINTER=y
---
> CONFIG_PRINTER=m
3028c2807
< CONFIG_VIRTIO_CONSOLE=y
---
> CONFIG_VIRTIO_CONSOLE=m
3042c2821
< CONFIG_NVRAM=y
---
> CONFIG_NVRAM=m
3065,3066c2844,2845
< CONFIG_TCG_TIS=m
< CONFIG_TCG_NSC=m
---
> # CONFIG_TCG_TIS is not set
> # CONFIG_TCG_NSC is not set
3068c2847
< CONFIG_TCG_INFINEON=m
---
> # CONFIG_TCG_INFINEON is not set
3072c2851
< CONFIG_I2C=y
---
> CONFIG_I2C=m
3075c2854
< CONFIG_I2C_CHARDEV=y
---
> CONFIG_I2C_CHARDEV=m
3086c2865
< CONFIG_I2C_ALGOBIT=y
---
> CONFIG_I2C_ALGOBIT=m
3122c2901
< # CONFIG_I2C_INTEL_MID is not set
---
> CONFIG_I2C_INTEL_MID=m
3125,3126c2904
< CONFIG_I2C_PXA=m
< CONFIG_I2C_PXA_PCI=y
---
> # CONFIG_I2C_PXA_PCI is not set
3134c2912
< CONFIG_I2C_DIOLAN_U2C=m
---
> # CONFIG_I2C_DIOLAN_U2C is not set
3152,3176c2930
< CONFIG_SPI=y
< CONFIG_SPI_MASTER=y
< 
< #
< # SPI Master Controller Drivers
< #
< CONFIG_SPI_ALTERA=m
< CONFIG_SPI_BITBANG=m
< CONFIG_SPI_BUTTERFLY=m
< CONFIG_SPI_GPIO=m
< CONFIG_SPI_LM70_LLP=m
< CONFIG_SPI_OC_TINY=m
< CONFIG_SPI_PXA2XX=m
< CONFIG_SPI_PXA2XX_PCI=y
< CONFIG_SPI_TOPCLIFF_PCH=m
< CONFIG_SPI_XILINX=m
< CONFIG_SPI_DESIGNWARE=y
< CONFIG_SPI_DW_PCI=m
< # CONFIG_SPI_DW_MID_DMA is not set
< 
< #
< # SPI Protocol Masters
< #
< CONFIG_SPI_SPIDEV=m
< CONFIG_SPI_TLE62X0=m
---
> # CONFIG_SPI is not set
3183d2936
< # CONFIG_NTP_PPS is not set
3188c2941
< CONFIG_PPS_CLIENT_KTIMER=m
---
> # CONFIG_PPS_CLIENT_KTIMER is not set
3196a2950
> # CONFIG_DEBUG_GPIO is not set
3215,3222d2968
< CONFIG_GPIO_SX150X=y
< CONFIG_GPIO_STMPE=y
< CONFIG_GPIO_TC3589X=y
< CONFIG_GPIO_TWL4030=m
< CONFIG_GPIO_WM831X=m
< CONFIG_GPIO_WM8350=m
< CONFIG_GPIO_WM8994=m
< CONFIG_GPIO_ADP5520=m
3229c2975
< CONFIG_GPIO_LANGWELL=y
---
> # CONFIG_GPIO_LANGWELL is not set
3232c2978
< CONFIG_GPIO_TIMBERDALE=y
---
> # CONFIG_GPIO_TIMBERDALE is not set
3238,3241d2983
< CONFIG_GPIO_MAX7301=m
< CONFIG_GPIO_MCP23S08=m
< CONFIG_GPIO_MC33880=m
< CONFIG_GPIO_74X164=m
3246c2988
< CONFIG_GPIO_UCB1400=y
---
> # CONFIG_GPIO_UCB1400 is not set
3277,3281c3019
< CONFIG_MAX8925_POWER=m
< CONFIG_WM831X_BACKUP=m
< CONFIG_WM831X_POWER=m
< CONFIG_WM8350_POWER=m
< # CONFIG_TEST_POWER is not set
---
> CONFIG_TEST_POWER=m
3284d3021
< CONFIG_BATTERY_OLPC=m
3289d3025
< CONFIG_BATTERY_DA9030=m
3294d3029
< CONFIG_CHARGER_TWL4030=m
3296c3031
< CONFIG_HWMON=y
---
> CONFIG_HWMON=m
3307d3041
< CONFIG_SENSORS_ADCXX=m
3340c3074
< CONFIG_SENSORS_LINEAGE=m
---
> # CONFIG_SENSORS_LINEAGE is not set
3342d3075
< CONFIG_SENSORS_LM70=m
3354c3087
< CONFIG_SENSORS_LTC4151=m
---
> # CONFIG_SENSORS_LTC4151 is not set
3359d3091
< CONFIG_SENSORS_MAX1111=m
3361c3093
< CONFIG_SENSORS_MAX6639=m
---
> # CONFIG_SENSORS_MAX6639 is not set
3366,3370c3098
< CONFIG_PMBUS=m
< CONFIG_SENSORS_PMBUS=m
< CONFIG_SENSORS_MAX16064=m
< CONFIG_SENSORS_MAX34440=m
< CONFIG_SENSORS_MAX8688=m
---
> # CONFIG_PMBUS is not set
3381,3382c3109,3110
< CONFIG_SENSORS_SCH5627=m
< CONFIG_SENSORS_ADS1015=m
---
> # CONFIG_SENSORS_SCH5627 is not set
> # CONFIG_SENSORS_ADS1015 is not set
3384d3111
< CONFIG_SENSORS_ADS7871=m
3390d3116
< # CONFIG_SENSORS_TWL4030_MADC is not set
3405,3406d3130
< CONFIG_SENSORS_WM831X=m
< CONFIG_SENSORS_WM8350=m
3408d3131
< CONFIG_SENSORS_MC13783_ADC=m
3414c3137
< CONFIG_THERMAL=y
---
> CONFIG_THERMAL=m
3423,3425d3145
< CONFIG_WM831X_WATCHDOG=m
< CONFIG_WM8350_WATCHDOG=m
< CONFIG_TWL4030_WATCHDOG=m
3450d3169
< CONFIG_RDC321X_WDT=m
3497d3215
< # CONFIG_SSB_SILENT is not set
3502,3505c3220,3221
< CONFIG_MFD_CORE=y
< CONFIG_MFD_88PM860X=y
< CONFIG_MFD_SM501=m
< CONFIG_MFD_SM501_GPIO=y
---
> CONFIG_MFD_CORE=m
> # CONFIG_MFD_SM501 is not set
3507d3222
< CONFIG_HTC_I2CPLD=y
3509c3224
< CONFIG_TPS6105X=m
---
> # CONFIG_TPS6105X is not set
3512,3517d3226
< CONFIG_TWL4030_CORE=y
< CONFIG_TWL4030_MADC=m
< CONFIG_TWL4030_CODEC=y
< CONFIG_TWL6030_PWM=m
< CONFIG_MFD_STMPE=y
< CONFIG_MFD_TC3589X=y
3519,3523d3227
< CONFIG_PMIC_DA903X=y
< CONFIG_PMIC_ADP5520=y
< CONFIG_MFD_MAX8925=y
< CONFIG_MFD_MAX8997=y
< CONFIG_MFD_MAX8998=y
3525,3530d3228
< CONFIG_MFD_WM831X=y
< CONFIG_MFD_WM831X_I2C=y
< CONFIG_MFD_WM831X_SPI=y
< CONFIG_MFD_WM8350=y
< CONFIG_MFD_WM8350_I2C=y
< CONFIG_MFD_WM8994=y
3532,3533d3229
< CONFIG_MFD_MC13783=m
< CONFIG_MFD_MC13XXX=m
3536,3543c3232
< CONFIG_ABX500_CORE=y
< CONFIG_AB3100_CORE=y
< CONFIG_AB3100_OTP=m
< CONFIG_EZX_PCAP=y
< CONFIG_AB8500_CORE=y
< CONFIG_AB8500_DEBUG=y
< CONFIG_AB8500_GPADC=y
< CONFIG_AB3550_CORE=y
---
> # CONFIG_ABX500_CORE is not set
3545c3234
< CONFIG_MFD_TIMBERDALE=y
---
> CONFIG_MFD_TIMBERDALE=m
3549d3237
< CONFIG_MFD_TPS6586X=y
3552,3589c3240,3241
< CONFIG_REGULATOR=y
< # CONFIG_REGULATOR_DEBUG is not set
< CONFIG_REGULATOR_DUMMY=y
< CONFIG_REGULATOR_FIXED_VOLTAGE=m
< CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
< CONFIG_REGULATOR_USERSPACE_CONSUMER=m
< CONFIG_REGULATOR_BQ24022=m
< CONFIG_REGULATOR_MAX1586=m
< CONFIG_REGULATOR_MAX8649=m
< CONFIG_REGULATOR_MAX8660=m
< CONFIG_REGULATOR_MAX8925=m
< CONFIG_REGULATOR_MAX8952=m
< CONFIG_REGULATOR_MAX8997=m
< CONFIG_REGULATOR_MAX8998=m
< CONFIG_REGULATOR_TWL4030=y
< CONFIG_REGULATOR_WM831X=m
< CONFIG_REGULATOR_WM8350=m
< CONFIG_REGULATOR_WM8400=m
< CONFIG_REGULATOR_WM8994=m
< CONFIG_REGULATOR_DA903X=m
< CONFIG_REGULATOR_PCF50633=m
< CONFIG_REGULATOR_LP3971=m
< CONFIG_REGULATOR_LP3972=m
< CONFIG_REGULATOR_PCAP=m
< CONFIG_REGULATOR_MC13XXX_CORE=m
< CONFIG_REGULATOR_MC13783=m
< CONFIG_REGULATOR_MC13892=m
< CONFIG_REGULATOR_AB3100=m
< CONFIG_REGULATOR_TPS6105X=m
< CONFIG_REGULATOR_TPS65023=m
< CONFIG_REGULATOR_TPS6507X=m
< CONFIG_REGULATOR_88PM8607=y
< CONFIG_REGULATOR_ISL6271A=m
< CONFIG_REGULATOR_AD5398=m
< CONFIG_REGULATOR_AB8500=y
< CONFIG_REGULATOR_TPS6586X=m
< CONFIG_REGULATOR_TPS6524X=m
< CONFIG_MEDIA_SUPPORT=y
---
> # CONFIG_REGULATOR is not set
> CONFIG_MEDIA_SUPPORT=m
3594,3599c3246,3250
< CONFIG_MEDIA_CONTROLLER=y
< CONFIG_VIDEO_DEV=y
< CONFIG_VIDEO_V4L2_COMMON=y
< CONFIG_VIDEO_V4L2_SUBDEV_API=y
< CONFIG_DVB_CORE=y
< CONFIG_VIDEO_MEDIA=y
---
> # CONFIG_MEDIA_CONTROLLER is not set
> CONFIG_VIDEO_DEV=m
> CONFIG_VIDEO_V4L2_COMMON=m
> CONFIG_DVB_CORE=m
> CONFIG_VIDEO_MEDIA=m
3606,3615c3257,3266
< CONFIG_RC_CORE=y
< CONFIG_LIRC=y
< CONFIG_RC_MAP=y
< CONFIG_IR_NEC_DECODER=y
< CONFIG_IR_RC5_DECODER=y
< CONFIG_IR_RC6_DECODER=y
< CONFIG_IR_JVC_DECODER=y
< CONFIG_IR_SONY_DECODER=y
< CONFIG_IR_RC5_SZ_DECODER=y
< CONFIG_IR_LIRC_CODEC=y
---
> CONFIG_RC_CORE=m
> CONFIG_LIRC=m
> CONFIG_RC_MAP=m
> CONFIG_IR_NEC_DECODER=m
> CONFIG_IR_RC5_DECODER=m
> CONFIG_IR_RC6_DECODER=m
> CONFIG_IR_JVC_DECODER=m
> CONFIG_IR_SONY_DECODER=m
> CONFIG_IR_RC5_SZ_DECODER=m
> CONFIG_IR_LIRC_CODEC=m
3619c3270
< CONFIG_IR_ITE_CIR=m
---
> # CONFIG_IR_ITE_CIR is not set
3623c3274
< # CONFIG_RC_LOOPBACK is not set
---
> CONFIG_RC_LOOPBACK=m
3625,3630c3276,3277
< CONFIG_MEDIA_TUNER=y
< CONFIG_MEDIA_TUNER_CUSTOMISE=y
< 
< #
< # Customize TV tuners
< #
---
> CONFIG_MEDIA_TUNER=m
> # CONFIG_MEDIA_TUNER_CUSTOMISE is not set
3650c3297
< CONFIG_VIDEO_V4L2=y
---
> CONFIG_VIDEO_V4L2=m
3658a3306
> CONFIG_V4L2_MEM2MEM_DEV=m
3665,3666c3313,3318
< CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
< CONFIG_VIDEO_IR_I2C=y
---
> # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
> CONFIG_VIDEO_IR_I2C=m
> 
> #
> # Encoders/decoders and other helper chips
> #
3679a3332
> CONFIG_VIDEO_TLV320AIC23B=m
3698a3352
> CONFIG_VIDEO_TCM825X=m
3701a3356,3357
> CONFIG_VIDEO_SAA7191=m
> CONFIG_VIDEO_TVP514X=m
3702a3359
> CONFIG_VIDEO_TVP7002=m
3721a3379,3381
> CONFIG_VIDEO_THS7303=m
> CONFIG_VIDEO_ADV7343=m
> CONFIG_VIDEO_AK881X=m
3760c3420
< CONFIG_MEDIA_ALTERA_CI=m
---
> # CONFIG_MEDIA_ALTERA_CI is not set
3770c3430
< CONFIG_VIDEO_NOON010PC30=m
---
> # CONFIG_VIDEO_NOON010PC30 is not set
3785c3445
< CONFIG_SOC_CAMERA_OV9740=m
---
> # CONFIG_SOC_CAMERA_OV9740 is not set
3802c3462
< CONFIG_USB_GSPCA_NW80X=m
---
> # CONFIG_USB_GSPCA_NW80X is not set
3829c3489
< CONFIG_USB_GSPCA_VICAM=m
---
> # CONFIG_USB_GSPCA_VICAM is not set
3855c3515
< # CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
---
> CONFIG_VIDEO_MEM2MEM_TESTDEV=m
3874,3876c3534
< CONFIG_RADIO_SI470X=y
< CONFIG_USB_SI470X=m
< CONFIG_I2C_SI470X=m
---
> # CONFIG_RADIO_SI470X is not set
3887c3545
< CONFIG_RADIO_WL128X=m
---
> # CONFIG_RADIO_WL128X is not set
3889c3547
< CONFIG_DVB_DYNAMIC_MINORS=y
---
> # CONFIG_DVB_DYNAMIC_MINORS is not set
3911c3569
< CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
---
> # CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
3939c3597
< CONFIG_DVB_USB_TECHNISAT_USB2=m
---
> # CONFIG_DVB_USB_TECHNISAT_USB2 is not set
4115c3773
< # CONFIG_DVB_DUMMY_FE is not set
---
> CONFIG_DVB_DUMMY_FE=m
4120,4130c3778,3788
< CONFIG_AGP=y
< CONFIG_AGP_ALI=y
< CONFIG_AGP_ATI=y
< CONFIG_AGP_AMD=y
< CONFIG_AGP_AMD64=y
< CONFIG_AGP_INTEL=y
< CONFIG_AGP_NVIDIA=y
< CONFIG_AGP_SIS=y
< CONFIG_AGP_SWORKS=y
< CONFIG_AGP_VIA=y
< CONFIG_AGP_EFFICEON=y
---
> CONFIG_AGP=m
> CONFIG_AGP_ALI=m
> CONFIG_AGP_ATI=m
> CONFIG_AGP_AMD=m
> CONFIG_AGP_AMD64=m
> CONFIG_AGP_INTEL=m
> CONFIG_AGP_NVIDIA=m
> CONFIG_AGP_SIS=m
> CONFIG_AGP_SWORKS=m
> CONFIG_AGP_VIA=m
> CONFIG_AGP_EFFICEON=m
4134,4141c3792,3799
< CONFIG_DRM=y
< CONFIG_DRM_KMS_HELPER=y
< CONFIG_DRM_TTM=y
< CONFIG_DRM_TDFX=y
< CONFIG_DRM_R128=y
< CONFIG_DRM_RADEON=y
< # CONFIG_DRM_RADEON_KMS is not set
< CONFIG_DRM_I810=y
---
> CONFIG_DRM=m
> CONFIG_DRM_KMS_HELPER=m
> CONFIG_DRM_TTM=m
> CONFIG_DRM_TDFX=m
> CONFIG_DRM_R128=m
> CONFIG_DRM_RADEON=m
> CONFIG_DRM_RADEON_KMS=y
> CONFIG_DRM_I810=m
4144c3802
< CONFIG_DRM_MGA=y
---
> CONFIG_DRM_MGA=m
4146,4147c3804,3805
< CONFIG_DRM_VIA=y
< CONFIG_DRM_SAVAGE=y
---
> CONFIG_DRM_VIA=m
> CONFIG_DRM_SAVAGE=m
4149,4150c3807,3808
< CONFIG_VGASTATE=y
< CONFIG_VIDEO_OUTPUT_CONTROL=y
---
> CONFIG_VGASTATE=m
> CONFIG_VIDEO_OUTPUT_CONTROL=m
4153c3811
< CONFIG_FB_DDC=y
---
> CONFIG_FB_DDC=m
4159,4166c3817,3821
< CONFIG_FB_SYS_FILLRECT=y
< CONFIG_FB_SYS_COPYAREA=y
< CONFIG_FB_SYS_IMAGEBLIT=y
< CONFIG_FB_FOREIGN_ENDIAN=y
< CONFIG_FB_BOTH_ENDIAN=y
< # CONFIG_FB_BIG_ENDIAN is not set
< # CONFIG_FB_LITTLE_ENDIAN is not set
< CONFIG_FB_SYS_FOPS=y
---
> CONFIG_FB_SYS_FILLRECT=m
> CONFIG_FB_SYS_COPYAREA=m
> CONFIG_FB_SYS_IMAGEBLIT=m
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> CONFIG_FB_SYS_FOPS=m
4169,4170c3824,3825
< CONFIG_FB_HECUBA=y
< CONFIG_FB_SVGALIB=y
---
> CONFIG_FB_HECUBA=m
> CONFIG_FB_SVGALIB=m
4179,4182c3834,3837
< CONFIG_FB_CIRRUS=y
< CONFIG_FB_PM2=y
< CONFIG_FB_PM2_FIFO_DISCONNECT=y
< CONFIG_FB_CYBER2000=y
---
> CONFIG_FB_CIRRUS=m
> CONFIG_FB_PM2=m
> # CONFIG_FB_PM2_FIFO_DISCONNECT is not set
> CONFIG_FB_CYBER2000=m
4184,4188c3839,3843
< CONFIG_FB_ARC=y
< CONFIG_FB_ASILIANT=y
< CONFIG_FB_IMSTT=y
< CONFIG_FB_VGA16=y
< CONFIG_FB_UVESA=y
---
> CONFIG_FB_ARC=m
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> CONFIG_FB_VGA16=m
> # CONFIG_FB_UVESA is not set
4190,4194c3845,3849
< CONFIG_FB_EFI=y
< CONFIG_FB_N411=y
< CONFIG_FB_HGA=y
< CONFIG_FB_S1D13XXX=y
< CONFIG_FB_NVIDIA=y
---
> # CONFIG_FB_EFI is not set
> CONFIG_FB_N411=m
> CONFIG_FB_HGA=m
> CONFIG_FB_S1D13XXX=m
> CONFIG_FB_NVIDIA=m
4198c3853
< CONFIG_FB_RIVA=y
---
> CONFIG_FB_RIVA=m
4202c3857
< CONFIG_FB_I810=y
---
> CONFIG_FB_I810=m
4205,4210c3860,3862
< CONFIG_FB_LE80578=y
< CONFIG_FB_CARILLO_RANCH=y
< CONFIG_FB_INTEL=m
< # CONFIG_FB_INTEL_DEBUG is not set
< CONFIG_FB_INTEL_I2C=y
< CONFIG_FB_MATROX=y
---
> CONFIG_FB_LE80578=m
> CONFIG_FB_CARILLO_RANCH=m
> CONFIG_FB_MATROX=m
4214,4216c3866,3868
< CONFIG_FB_MATROX_I2C=y
< CONFIG_FB_MATROX_MAVEN=y
< CONFIG_FB_RADEON=y
---
> CONFIG_FB_MATROX_I2C=m
> CONFIG_FB_MATROX_MAVEN=m
> CONFIG_FB_RADEON=m
4220c3872
< CONFIG_FB_ATY128=y
---
> CONFIG_FB_ATY128=m
4222c3874
< CONFIG_FB_ATY=y
---
> CONFIG_FB_ATY=m
4227,4228c3879,3880
< CONFIG_FB_S3=y
< CONFIG_FB_SAVAGE=y
---
> CONFIG_FB_S3=m
> CONFIG_FB_SAVAGE=m
4231c3883
< CONFIG_FB_SIS=y
---
> CONFIG_FB_SIS=m
4234c3886
< CONFIG_FB_VIA=y
---
> CONFIG_FB_VIA=m
4236,4239c3888,3891
< CONFIG_FB_NEOMAGIC=y
< CONFIG_FB_KYRO=y
< CONFIG_FB_3DFX=y
< CONFIG_FB_3DFX_ACCEL=y
---
> CONFIG_FB_NEOMAGIC=m
> CONFIG_FB_KYRO=m
> CONFIG_FB_3DFX=m
> # CONFIG_FB_3DFX_ACCEL is not set
4241,4248c3893,3900
< CONFIG_FB_VOODOO1=y
< CONFIG_FB_VT8623=y
< CONFIG_FB_TRIDENT=y
< CONFIG_FB_ARK=y
< CONFIG_FB_PM3=y
< CONFIG_FB_CARMINE=y
< # CONFIG_FB_CARMINE_DRAM_EVAL is not set
< CONFIG_CARMINE_DRAM_CUSTOM=y
---
> CONFIG_FB_VOODOO1=m
> CONFIG_FB_VT8623=m
> CONFIG_FB_TRIDENT=m
> CONFIG_FB_ARK=m
> CONFIG_FB_PM3=m
> CONFIG_FB_CARMINE=m
> CONFIG_FB_CARMINE_DRAM_EVAL=y
> # CONFIG_CARMINE_DRAM_CUSTOM is not set
4250,4252c3902,3904
< CONFIG_FB_GEODE_LX=y
< CONFIG_FB_GEODE_GX=y
< CONFIG_FB_GEODE_GX1=y
---
> CONFIG_FB_GEODE_LX=m
> CONFIG_FB_GEODE_GX=m
> CONFIG_FB_GEODE_GX1=m
4255d3906
< CONFIG_FB_SM501=m
4258,4259c3909,3910
< CONFIG_FB_METRONOME=y
< CONFIG_FB_MB862XX=y
---
> CONFIG_FB_METRONOME=m
> CONFIG_FB_MB862XX=m
4261c3912
< CONFIG_FB_BROADSHEET=y
---
> CONFIG_FB_BROADSHEET=m
4264,4269d3914
< CONFIG_LCD_L4F00242T03=m
< CONFIG_LCD_LMS283GF05=m
< CONFIG_LCD_LTV350QV=m
< CONFIG_LCD_ILI9320=m
< CONFIG_LCD_TDO24M=m
< CONFIG_LCD_VGG2432A4=m
4271,4272d3915
< CONFIG_LCD_S6E63M0=m
< CONFIG_LCD_LD9040=m
4274c3917
< CONFIG_BACKLIGHT_GENERIC=y
---
> CONFIG_BACKLIGHT_GENERIC=m
4277,4279c3920
< CONFIG_BACKLIGHT_DA903X=m
< CONFIG_BACKLIGHT_MAX8925=m
< CONFIG_BACKLIGHT_APPLE=m
---
> # CONFIG_BACKLIGHT_APPLE is not set
4281,4282d3921
< CONFIG_BACKLIGHT_WM831X=m
< CONFIG_BACKLIGHT_ADP5520=m
4284d3922
< CONFIG_BACKLIGHT_88PM860X=m
4290c3928
< CONFIG_DISPLAY_SUPPORT=y
---
> CONFIG_DISPLAY_SUPPORT=m
4301,4302c3939,3940
< CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
< CONFIG_MDA_CONSOLE=y
---
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_MDA_CONSOLE=m
4306c3944
< CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
---
> # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
4310,4317c3948,3955
< CONFIG_FONT_6x11=y
< CONFIG_FONT_7x14=y
< CONFIG_FONT_PEARL_8x8=y
< CONFIG_FONT_ACORN_8x8=y
< CONFIG_FONT_MINI_4x6=y
< CONFIG_FONT_SUN8x16=y
< CONFIG_FONT_SUN12x22=y
< CONFIG_FONT_10x18=y
---
> # CONFIG_FONT_6x11 is not set
> # CONFIG_FONT_7x14 is not set
> # CONFIG_FONT_PEARL_8x8 is not set
> # CONFIG_FONT_ACORN_8x8 is not set
> # CONFIG_FONT_MINI_4x6 is not set
> # CONFIG_FONT_SUN8x16 is not set
> # CONFIG_FONT_SUN12x22 is not set
> # CONFIG_FONT_10x18 is not set
4320c3958
< CONFIG_LOGO_LINUX_VGA16=y
---
> # CONFIG_LOGO_LINUX_VGA16 is not set
4341c3979
< CONFIG_SND_SUPPORT_OLD_API=y
---
> # CONFIG_SND_SUPPORT_OLD_API is not set
4358c3996
< CONFIG_SND_PCSP=m
---
> # CONFIG_SND_PCSP is not set
4458,4459c4096
< CONFIG_SND_HDA_INPUT_BEEP=y
< CONFIG_SND_HDA_INPUT_BEEP_MODE=1
---
> # CONFIG_SND_HDA_INPUT_BEEP is not set
4461c4098
< # CONFIG_SND_HDA_PATCH_LOADER is not set
---
> CONFIG_SND_HDA_PATCH_LOADER=y
4499d4135
< CONFIG_SND_SPI=y
4507c4143
< CONFIG_SND_USB_6FIRE=m
---
> # CONFIG_SND_USB_6FIRE is not set
4509,4510c4145
< CONFIG_SND_FIREWIRE_LIB=m
< CONFIG_SND_FIREWIRE_SPEAKERS=m
---
> # CONFIG_SND_FIREWIRE_SPEAKERS is not set
4514,4613c4149,4150
< CONFIG_SND_SOC=m
< # CONFIG_SND_SOC_CACHE_LZO is not set
< CONFIG_SND_SOC_I2C_AND_SPI=m
< CONFIG_SND_SOC_ALL_CODECS=m
< CONFIG_SND_SOC_88PM860X=m
< CONFIG_SND_SOC_WM_HUBS=m
< CONFIG_SND_SOC_AD1836=m
< CONFIG_SND_SOC_AD193X=m
< CONFIG_SND_SOC_AD73311=m
< CONFIG_SND_SOC_ADS117X=m
< CONFIG_SND_SOC_AK4104=m
< CONFIG_SND_SOC_AK4535=m
< CONFIG_SND_SOC_AK4642=m
< CONFIG_SND_SOC_AK4671=m
< CONFIG_SND_SOC_ALC5623=m
< CONFIG_SND_SOC_CS42L51=m
< CONFIG_SND_SOC_CS4270=m
< CONFIG_SND_SOC_CS4271=m
< CONFIG_SND_SOC_CX20442=m
< CONFIG_SND_SOC_L3=m
< CONFIG_SND_SOC_DA7210=m
< CONFIG_SND_SOC_DFBMCS320=m
< CONFIG_SND_SOC_MAX98088=m
< CONFIG_SND_SOC_MAX9850=m
< CONFIG_SND_SOC_PCM3008=m
< CONFIG_SND_SOC_SGTL5000=m
< CONFIG_SND_SOC_SPDIF=m
< CONFIG_SND_SOC_SSM2602=m
< CONFIG_SND_SOC_TLV320AIC23=m
< CONFIG_SND_SOC_TLV320AIC26=m
< CONFIG_SND_SOC_TVL320AIC32X4=m
< CONFIG_SND_SOC_TLV320AIC3X=m
< CONFIG_SND_SOC_TLV320DAC33=m
< CONFIG_SND_SOC_TWL4030=m
< CONFIG_SND_SOC_TWL6040=m
< CONFIG_SND_SOC_UDA134X=m
< CONFIG_SND_SOC_UDA1380=m
< CONFIG_SND_SOC_WL1273=m
< CONFIG_SND_SOC_WM8350=m
< CONFIG_SND_SOC_WM8400=m
< CONFIG_SND_SOC_WM8510=m
< CONFIG_SND_SOC_WM8523=m
< CONFIG_SND_SOC_WM8580=m
< CONFIG_SND_SOC_WM8711=m
< CONFIG_SND_SOC_WM8727=m
< CONFIG_SND_SOC_WM8728=m
< CONFIG_SND_SOC_WM8731=m
< CONFIG_SND_SOC_WM8737=m
< CONFIG_SND_SOC_WM8741=m
< CONFIG_SND_SOC_WM8750=m
< CONFIG_SND_SOC_WM8753=m
< CONFIG_SND_SOC_WM8770=m
< CONFIG_SND_SOC_WM8776=m
< CONFIG_SND_SOC_WM8804=m
< CONFIG_SND_SOC_WM8900=m
< CONFIG_SND_SOC_WM8903=m
< CONFIG_SND_SOC_WM8904=m
< CONFIG_SND_SOC_WM8940=m
< CONFIG_SND_SOC_WM8955=m
< CONFIG_SND_SOC_WM8960=m
< CONFIG_SND_SOC_WM8961=m
< CONFIG_SND_SOC_WM8962=m
< CONFIG_SND_SOC_WM8971=m
< CONFIG_SND_SOC_WM8974=m
< CONFIG_SND_SOC_WM8978=m
< CONFIG_SND_SOC_WM8985=m
< CONFIG_SND_SOC_WM8988=m
< CONFIG_SND_SOC_WM8990=m
< CONFIG_SND_SOC_WM8991=m
< CONFIG_SND_SOC_WM8993=m
< CONFIG_SND_SOC_WM8994=m
< CONFIG_SND_SOC_WM8995=m
< CONFIG_SND_SOC_WM9081=m
< CONFIG_SND_SOC_LM4857=m
< CONFIG_SND_SOC_MAX9877=m
< CONFIG_SND_SOC_TPA6130A2=m
< CONFIG_SND_SOC_WM2000=m
< CONFIG_SND_SOC_WM9090=m
< CONFIG_SOUND_PRIME=m
< # CONFIG_SOUND_MSNDCLAS is not set
< # CONFIG_SOUND_MSNDPIN is not set
< CONFIG_SOUND_OSS=m
< CONFIG_SOUND_TRACEINIT=y
< CONFIG_SOUND_DMAP=y
< CONFIG_SOUND_VMIDI=m
< CONFIG_SOUND_TRIX=m
< CONFIG_SOUND_MSS=m
< CONFIG_SOUND_MPU401=m
< CONFIG_SOUND_PAS=m
< CONFIG_SOUND_PSS=m
< CONFIG_PSS_MIXER=y
< CONFIG_SOUND_SB=m
< CONFIG_SOUND_YM3812=m
< CONFIG_SOUND_UART6850=m
< CONFIG_SOUND_AEDSP16=m
< CONFIG_SC6600=y
< CONFIG_SC6600_JOY=y
< CONFIG_SC6600_CDROM=4
< CONFIG_SC6600_CDROMBASE=0
< CONFIG_SOUND_KAHLUA=m
---
> # CONFIG_SND_SOC is not set
> # CONFIG_SOUND_PRIME is not set
4616c4153
< CONFIG_HID=y
---
> CONFIG_HID=m
4622c4159
< CONFIG_USB_HID=y
---
> CONFIG_USB_HID=m
4629,4630c4166,4167
< CONFIG_HID_3M_PCT=y
< CONFIG_HID_A4TECH=y
---
> CONFIG_HID_3M_PCT=m
> CONFIG_HID_A4TECH=m
4633,4637c4170,4174
< CONFIG_HID_APPLE=y
< CONFIG_HID_BELKIN=y
< CONFIG_HID_CANDO=y
< CONFIG_HID_CHERRY=y
< CONFIG_HID_CHICONY=y
---
> CONFIG_HID_APPLE=m
> CONFIG_HID_BELKIN=m
> CONFIG_HID_CANDO=m
> CONFIG_HID_CHERRY=m
> CONFIG_HID_CHICONY=m
4639,4640c4176,4177
< CONFIG_HID_CYPRESS=y
< CONFIG_HID_DRAGONRISE=y
---
> CONFIG_HID_CYPRESS=m
> CONFIG_HID_DRAGONRISE=m
4643,4653c4180,4189
< CONFIG_HID_ELECOM=m
< CONFIG_HID_EZKEY=y
< CONFIG_HID_KEYTOUCH=y
< CONFIG_HID_KYE=y
< CONFIG_HID_UCLOGIC=y
< CONFIG_HID_WALTOP=y
< CONFIG_HID_GYRATION=y
< CONFIG_HID_TWINHAN=y
< CONFIG_HID_KENSINGTON=y
< CONFIG_HID_LCPOWER=y
< CONFIG_HID_LOGITECH=y
---
> CONFIG_HID_EZKEY=m
> # CONFIG_HID_KEYTOUCH is not set
> CONFIG_HID_KYE=m
> CONFIG_HID_UCLOGIC=m
> CONFIG_HID_WALTOP=m
> CONFIG_HID_GYRATION=m
> CONFIG_HID_TWINHAN=m
> CONFIG_HID_KENSINGTON=m
> # CONFIG_HID_LCPOWER is not set
> CONFIG_HID_LOGITECH=m
4658,4665c4194,4200
< CONFIG_HID_MAGICMOUSE=m
< CONFIG_HID_MICROSOFT=y
< CONFIG_HID_MOSART=y
< CONFIG_HID_MONTEREY=y
< CONFIG_HID_MULTITOUCH=y
< CONFIG_HID_NTRIG=y
< CONFIG_HID_ORTEK=y
< CONFIG_HID_PANTHERLORD=y
---
> CONFIG_HID_MICROSOFT=m
> CONFIG_HID_MOSART=m
> CONFIG_HID_MONTEREY=m
> CONFIG_HID_MULTITOUCH=m
> CONFIG_HID_NTRIG=m
> CONFIG_HID_ORTEK=m
> CONFIG_HID_PANTHERLORD=m
4667c4202
< CONFIG_HID_PETALYNX=y
---
> CONFIG_HID_PETALYNX=m
4673,4685c4208,4220
< CONFIG_HID_QUANTA=y
< CONFIG_HID_ROCCAT=y
< CONFIG_HID_ROCCAT_COMMON=y
< CONFIG_HID_ROCCAT_ARVO=y
< CONFIG_HID_ROCCAT_KONE=y
< CONFIG_HID_ROCCAT_KONEPLUS=y
< CONFIG_HID_ROCCAT_KOVAPLUS=y
< CONFIG_HID_ROCCAT_PYRA=y
< CONFIG_HID_SAMSUNG=y
< CONFIG_HID_SONY=y
< CONFIG_HID_STANTUM=y
< CONFIG_HID_SUNPLUS=y
< CONFIG_HID_GREENASIA=y
---
> CONFIG_HID_QUANTA=m
> CONFIG_HID_ROCCAT=m
> CONFIG_HID_ROCCAT_COMMON=m
> # CONFIG_HID_ROCCAT_ARVO is not set
> CONFIG_HID_ROCCAT_KONE=m
> CONFIG_HID_ROCCAT_KONEPLUS=m
> # CONFIG_HID_ROCCAT_KOVAPLUS is not set
> CONFIG_HID_ROCCAT_PYRA=m
> CONFIG_HID_SAMSUNG=m
> CONFIG_HID_SONY=m
> CONFIG_HID_STANTUM=m
> CONFIG_HID_SUNPLUS=m
> CONFIG_HID_GREENASIA=m
4687c4222
< CONFIG_HID_SMARTJOYPLUS=y
---
> CONFIG_HID_SMARTJOYPLUS=m
4689,4690c4224,4225
< CONFIG_HID_TOPSEED=y
< CONFIG_HID_THRUSTMASTER=y
---
> CONFIG_HID_TOPSEED=m
> CONFIG_HID_THRUSTMASTER=m
4692,4694c4227
< CONFIG_HID_WACOM=m
< CONFIG_HID_WACOM_POWER_SUPPLY=y
< CONFIG_HID_ZEROPLUS=y
---
> CONFIG_HID_ZEROPLUS=m
4708c4241
< # CONFIG_USB_DEVICEFS is not set
---
> CONFIG_USB_DEVICEFS=y
4710,4713c4243,4245
< CONFIG_USB_DYNAMIC_MINORS=y
< # CONFIG_USB_SUSPEND is not set
< # CONFIG_USB_OTG_WHITELIST is not set
< # CONFIG_USB_OTG_BLACKLIST_HUB is not set
---
> # CONFIG_USB_DYNAMIC_MINORS is not set
> CONFIG_USB_SUSPEND=y
> # CONFIG_USB_OTG is not set
4715,4716c4247,4248
< CONFIG_USB_WUSB=y
< CONFIG_USB_WUSB_CBAF=y
---
> CONFIG_USB_WUSB=m
> CONFIG_USB_WUSB_CBAF=m
4739c4271
< CONFIG_USB_SL811_CS=y
---
> CONFIG_USB_SL811_CS=m
4741,4742c4273,4274
< CONFIG_USB_WHCI_HCD=y
< CONFIG_USB_HWA_HCD=y
---
> CONFIG_USB_WHCI_HCD=m
> CONFIG_USB_HWA_HCD=m
4747,4750c4279,4282
< CONFIG_USB_ACM=y
< CONFIG_USB_PRINTER=y
< CONFIG_USB_WDM=y
< CONFIG_USB_TMC=y
---
> CONFIG_USB_ACM=m
> CONFIG_USB_PRINTER=m
> CONFIG_USB_WDM=m
> CONFIG_USB_TMC=m
4761c4293
< CONFIG_USB_STORAGE_REALTEK=y
---
> # CONFIG_USB_STORAGE_REALTEK is not set
4773,4775c4305,4307
< CONFIG_USB_STORAGE_ENE_UB6250=y
< CONFIG_USB_UAS=y
< CONFIG_USB_LIBUSUAL=y
---
> # CONFIG_USB_STORAGE_ENE_UB6250 is not set
> CONFIG_USB_UAS=m
> # CONFIG_USB_LIBUSUAL is not set
4864c4396
< # CONFIG_USB_TEST is not set
---
> CONFIG_USB_TEST=m
4872,4916c4404
< CONFIG_USB_GADGET=m
< # CONFIG_USB_GADGET_DEBUG_FILES is not set
< # CONFIG_USB_GADGET_DEBUG_FS is not set
< CONFIG_USB_GADGET_VBUS_DRAW=2
< CONFIG_USB_GADGET_SELECTED=y
< # CONFIG_USB_GADGET_FUSB300 is not set
< # CONFIG_USB_GADGET_R8A66597 is not set
< # CONFIG_USB_GADGET_PXA_U2O is not set
< # CONFIG_USB_GADGET_M66592 is not set
< # CONFIG_USB_GADGET_AMD5536UDC is not set
< CONFIG_USB_GADGET_CI13XXX_PCI=y
< CONFIG_USB_CI13XXX_PCI=m
< # CONFIG_USB_GADGET_NET2280 is not set
< # CONFIG_USB_GADGET_GOKU is not set
< # CONFIG_USB_GADGET_LANGWELL is not set
< # CONFIG_USB_GADGET_EG20T is not set
< # CONFIG_USB_GADGET_DUMMY_HCD is not set
< CONFIG_USB_GADGET_DUALSPEED=y
< CONFIG_USB_ZERO=m
< CONFIG_USB_AUDIO=m
< CONFIG_USB_ETH=m
< CONFIG_USB_ETH_RNDIS=y
< CONFIG_USB_ETH_EEM=y
< CONFIG_USB_G_NCM=m
< CONFIG_USB_GADGETFS=m
< CONFIG_USB_FUNCTIONFS=m
< CONFIG_USB_FUNCTIONFS_ETH=y
< CONFIG_USB_FUNCTIONFS_RNDIS=y
< CONFIG_USB_FUNCTIONFS_GENERIC=y
< CONFIG_USB_FILE_STORAGE=m
< CONFIG_USB_FILE_STORAGE_TEST=y
< CONFIG_USB_MASS_STORAGE=m
< CONFIG_USB_G_SERIAL=m
< CONFIG_USB_MIDI_GADGET=m
< CONFIG_USB_G_PRINTER=m
< CONFIG_USB_CDC_COMPOSITE=m
< CONFIG_USB_G_NOKIA=m
< CONFIG_USB_G_MULTI=m
< CONFIG_USB_G_MULTI_RNDIS=y
< CONFIG_USB_G_MULTI_CDC=y
< CONFIG_USB_G_HID=m
< CONFIG_USB_G_DBGP=m
< CONFIG_USB_G_DBGP_PRINTK=y
< # CONFIG_USB_G_DBGP_SERIAL is not set
< CONFIG_USB_G_WEBCAM=m
---
> # CONFIG_USB_GADGET is not set
4923,4924d4410
< CONFIG_TWL4030_USB=m
< CONFIG_TWL6030_USB=m
4926,4929c4412,4414
< CONFIG_AB8500_USB=m
< CONFIG_UWB=y
< CONFIG_UWB_HWA=y
< CONFIG_UWB_WHCI=y
---
> CONFIG_UWB=m
> CONFIG_UWB_HWA=m
> CONFIG_UWB_WHCI=m
4931c4416
< CONFIG_MMC=y
---
> CONFIG_MMC=m
4939c4424
< CONFIG_MMC_BLOCK=y
---
> CONFIG_MMC_BLOCK=m
4942,4943c4427,4428
< CONFIG_SDIO_UART=y
< CONFIG_MMC_TEST=y
---
> CONFIG_SDIO_UART=m
> # CONFIG_MMC_TEST is not set
4948,4949c4433,4434
< CONFIG_MMC_SDHCI=y
< CONFIG_MMC_SDHCI_PCI=y
---
> CONFIG_MMC_SDHCI=m
> CONFIG_MMC_SDHCI_PCI=m
4951,4959c4436,4443
< CONFIG_MMC_SDHCI_OF=y
< CONFIG_MMC_SDHCI_PLTFM=y
< CONFIG_MMC_WBSD=y
< CONFIG_MMC_TIFM_SD=y
< CONFIG_MMC_SDRICOH_CS=y
< CONFIG_MMC_CB710=y
< CONFIG_MMC_VIA_SDMMC=y
< CONFIG_MMC_USHC=y
< CONFIG_MEMSTICK=y
---
> CONFIG_MMC_SDHCI_PLTFM=m
> CONFIG_MMC_WBSD=m
> CONFIG_MMC_TIFM_SD=m
> CONFIG_MMC_SDRICOH_CS=m
> CONFIG_MMC_CB710=m
> CONFIG_MMC_VIA_SDMMC=m
> CONFIG_MMC_USHC=m
> CONFIG_MEMSTICK=m
4966c4450
< CONFIG_MSPRO_BLOCK=y
---
> CONFIG_MSPRO_BLOCK=m
4971,4973c4455,4457
< CONFIG_MEMSTICK_TIFM_MS=y
< CONFIG_MEMSTICK_JMICRON_38X=y
< CONFIG_MEMSTICK_R592=y
---
> CONFIG_MEMSTICK_TIFM_MS=m
> CONFIG_MEMSTICK_JMICRON_38X=m
> # CONFIG_MEMSTICK_R592 is not set
4980,4981c4464
< CONFIG_LEDS_88PM860X=m
< CONFIG_LEDS_LM3530=m
---
> # CONFIG_LEDS_LM3530 is not set
4989d4471
< CONFIG_LEDS_GPIO_OF=y
4995,4999d4476
< CONFIG_LEDS_WM831X_STATUS=m
< CONFIG_LEDS_WM8350=m
< CONFIG_LEDS_DA903X=m
< CONFIG_LEDS_DAC124S085=m
< CONFIG_LEDS_REGULATOR=m
5003d4479
< CONFIG_LEDS_ADP5520=m
5005d4480
< CONFIG_LEDS_MC13783=m
5012d4486
< CONFIG_LEDS_TRIGGER_IDE_DISK=y
5021,5022c4495
< CONFIG_NFC_DEVICES=y
< CONFIG_PN544_NFC=m
---
> # CONFIG_NFC_DEVICES is not set
5034,5035c4507
< CONFIG_INFINIBAND_CXGB3=m
< # CONFIG_INFINIBAND_CXGB3_DEBUG is not set
---
> # CONFIG_INFINIBAND_CXGB3 is not set
5041,5042c4513,4515
< CONFIG_INFINIBAND_IPOIB_CM=y
< # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
---
> # CONFIG_INFINIBAND_IPOIB_CM is not set
> CONFIG_INFINIBAND_IPOIB_DEBUG=y
> # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
5053,5069c4526
< CONFIG_EDAC_MM_EDAC=y
< CONFIG_EDAC_MCE=y
< CONFIG_EDAC_AMD76X=m
< CONFIG_EDAC_E7XXX=m
< CONFIG_EDAC_E752X=m
< CONFIG_EDAC_I82875P=m
< CONFIG_EDAC_I82975X=m
< CONFIG_EDAC_I3000=m
< CONFIG_EDAC_I3200=m
< CONFIG_EDAC_X38=m
< CONFIG_EDAC_I5400=m
< CONFIG_EDAC_I7CORE=m
< CONFIG_EDAC_I82860=m
< CONFIG_EDAC_R82600=m
< CONFIG_EDAC_I5000=m
< CONFIG_EDAC_I5100=m
< CONFIG_EDAC_I7300=m
---
> # CONFIG_EDAC_MM_EDAC is not set
5079c4536
< # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
---
> CONFIG_RTC_INTF_DEV_UIE_EMUL=y
5090,5091d4546
< CONFIG_RTC_DRV_MAX8925=m
< CONFIG_RTC_DRV_MAX8998=m
5101d4555
< CONFIG_RTC_DRV_TWL4030=m
5110,5117d4563
< CONFIG_RTC_DRV_M41T94=m
< CONFIG_RTC_DRV_DS1305=m
< CONFIG_RTC_DRV_DS1390=m
< CONFIG_RTC_DRV_MAX6902=m
< CONFIG_RTC_DRV_R9701=m
< CONFIG_RTC_DRV_RS5C348=m
< CONFIG_RTC_DRV_DS3234=m
< CONFIG_RTC_DRV_PCF2123=m
5135,5136d4580
< CONFIG_RTC_DRV_WM831X=m
< CONFIG_RTC_DRV_WM8350=m
5138,5139d4581
< CONFIG_RTC_DRV_AB3100=m
< CONFIG_RTC_DRV_AB8500=m
5144,5145d4585
< CONFIG_RTC_DRV_PCAP=m
< CONFIG_RTC_DRV_MC13XXX=m
5152,5155c4592,4595
< CONFIG_INTEL_MID_DMAC=y
< CONFIG_INTEL_IOATDMA=y
< CONFIG_TIMB_DMA=y
< CONFIG_PCH_DMA=y
---
> CONFIG_INTEL_MID_DMAC=m
> CONFIG_INTEL_IOATDMA=m
> CONFIG_TIMB_DMA=m
> CONFIG_PCH_DMA=m
5162,5164c4602,4604
< CONFIG_ASYNC_TX_DMA=y
< # CONFIG_DMATEST is not set
< CONFIG_DCA=y
---
> # CONFIG_ASYNC_TX_DMA is not set
> CONFIG_DMATEST=m
> CONFIG_DCA=m
5166,5171c4606,4607
< CONFIG_KS0108=m
< CONFIG_KS0108_PORT=0x378
< CONFIG_KS0108_DELAY=2
< CONFIG_CFAG12864B=m
< CONFIG_CFAG12864B_RATE=20
< CONFIG_UIO=y
---
> # CONFIG_KS0108 is not set
> CONFIG_UIO=m
5187,5199c4623,4625
< CONFIG_ET131X=m
< # CONFIG_ET131X_DEBUG is not set
< CONFIG_SLICOSS=m
< CONFIG_VIDEO_GO7007=m
< CONFIG_VIDEO_GO7007_USB=m
< CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
< CONFIG_VIDEO_GO7007_OV7640=m
< CONFIG_VIDEO_GO7007_SAA7113=m
< CONFIG_VIDEO_GO7007_SAA7115=m
< CONFIG_VIDEO_GO7007_TW9903=m
< CONFIG_VIDEO_GO7007_UDA1342=m
< CONFIG_VIDEO_GO7007_SONY_TUNER=m
< CONFIG_VIDEO_GO7007_TW2804=m
---
> # CONFIG_ET131X is not set
> # CONFIG_SLICOSS is not set
> # CONFIG_VIDEO_GO7007 is not set
5205,5212c4631,4635
< CONFIG_DVB_CXD2099=m
< CONFIG_USB_IP_COMMON=m
< CONFIG_USB_IP_VHCI_HCD=m
< CONFIG_USB_IP_HOST=m
< # CONFIG_USB_IP_DEBUG_ENABLE is not set
< CONFIG_W35UND=m
< CONFIG_PRISM2_USB=m
< CONFIG_ECHO=m
---
> # CONFIG_DVB_CXD2099 is not set
> # CONFIG_USB_IP_COMMON is not set
> # CONFIG_W35UND is not set
> # CONFIG_PRISM2_USB is not set
> # CONFIG_ECHO is not set
5214,5216c4637,4639
< CONFIG_BRCMSMAC=y
< CONFIG_BRCMFMAC=y
< CONFIG_BRCMDBG=y
---
> # CONFIG_BRCMSMAC is not set
> # CONFIG_BRCMFMAC is not set
> # CONFIG_BRCMDBG is not set
5219,5353c4642,4644
< CONFIG_COMEDI=m
< # CONFIG_COMEDI_DEBUG is not set
< CONFIG_COMEDI_MISC_DRIVERS=m
< CONFIG_COMEDI_KCOMEDILIB=m
< CONFIG_COMEDI_BOND=m
< CONFIG_COMEDI_TEST=m
< CONFIG_COMEDI_PARPORT=m
< CONFIG_COMEDI_SERIAL2002=m
< CONFIG_COMEDI_SKEL=m
< CONFIG_COMEDI_ISA_DRIVERS=m
< CONFIG_COMEDI_ACL7225B=m
< CONFIG_COMEDI_PCL711=m
< CONFIG_COMEDI_PCL724=m
< CONFIG_COMEDI_PCL725=m
< CONFIG_COMEDI_PCL726=m
< CONFIG_COMEDI_PCL730=m
< CONFIG_COMEDI_PCL812=m
< CONFIG_COMEDI_PCL816=m
< CONFIG_COMEDI_PCL818=m
< CONFIG_COMEDI_PCM3724=m
< CONFIG_COMEDI_PCM3730=m
< CONFIG_COMEDI_RTI800=m
< CONFIG_COMEDI_RTI802=m
< CONFIG_COMEDI_DAS16M1=m
< CONFIG_COMEDI_DAS16=m
< CONFIG_COMEDI_DAS800=m
< CONFIG_COMEDI_DAS1800=m
< CONFIG_COMEDI_DAS6402=m
< CONFIG_COMEDI_DT2801=m
< CONFIG_COMEDI_DT2811=m
< CONFIG_COMEDI_DT2814=m
< CONFIG_COMEDI_DT2815=m
< CONFIG_COMEDI_DT2817=m
< CONFIG_COMEDI_DT282X=m
< CONFIG_COMEDI_DMM32AT=m
< CONFIG_COMEDI_FL512=m
< CONFIG_COMEDI_AIO_AIO12_8=m
< CONFIG_COMEDI_AIO_IIRO_16=m
< CONFIG_COMEDI_C6XDIGIO=m
< CONFIG_COMEDI_MPC624=m
< CONFIG_COMEDI_ADQ12B=m
< CONFIG_COMEDI_NI_AT_A2150=m
< CONFIG_COMEDI_NI_AT_AO=m
< CONFIG_COMEDI_NI_ATMIO=m
< CONFIG_COMEDI_NI_ATMIO16D=m
< CONFIG_COMEDI_PCMAD=m
< CONFIG_COMEDI_PCMDA12=m
< CONFIG_COMEDI_PCMMIO=m
< CONFIG_COMEDI_PCMUIO=m
< CONFIG_COMEDI_MULTIQ3=m
< CONFIG_COMEDI_POC=m
< CONFIG_COMEDI_PCI_DRIVERS=m
< CONFIG_COMEDI_ADDI_APCI_035=m
< CONFIG_COMEDI_ADDI_APCI_1032=m
< CONFIG_COMEDI_ADDI_APCI_1500=m
< CONFIG_COMEDI_ADDI_APCI_1516=m
< CONFIG_COMEDI_ADDI_APCI_1564=m
< CONFIG_COMEDI_ADDI_APCI_16XX=m
< CONFIG_COMEDI_ADDI_APCI_2016=m
< CONFIG_COMEDI_ADDI_APCI_2032=m
< CONFIG_COMEDI_ADDI_APCI_2200=m
< CONFIG_COMEDI_ADDI_APCI_3001=m
< CONFIG_COMEDI_ADDI_APCI_3120=m
< CONFIG_COMEDI_ADDI_APCI_3501=m
< CONFIG_COMEDI_ADDI_APCI_3XXX=m
< CONFIG_COMEDI_ADL_PCI6208=m
< CONFIG_COMEDI_ADL_PCI7230=m
< CONFIG_COMEDI_ADL_PCI7296=m
< CONFIG_COMEDI_ADL_PCI7432=m
< CONFIG_COMEDI_ADL_PCI8164=m
< CONFIG_COMEDI_ADL_PCI9111=m
< CONFIG_COMEDI_ADL_PCI9118=m
< CONFIG_COMEDI_ADV_PCI1710=m
< CONFIG_COMEDI_ADV_PCI1723=m
< CONFIG_COMEDI_ADV_PCI_DIO=m
< CONFIG_COMEDI_AMPLC_DIO200=m
< CONFIG_COMEDI_AMPLC_PC236=m
< CONFIG_COMEDI_AMPLC_PC263=m
< CONFIG_COMEDI_AMPLC_PCI224=m
< CONFIG_COMEDI_AMPLC_PCI230=m
< CONFIG_COMEDI_CONTEC_PCI_DIO=m
< CONFIG_COMEDI_DT3000=m
< CONFIG_COMEDI_UNIOXX5=m
< CONFIG_COMEDI_GSC_HPDI=m
< CONFIG_COMEDI_ICP_MULTI=m
< CONFIG_COMEDI_II_PCI20KC=m
< CONFIG_COMEDI_DAQBOARD2000=m
< CONFIG_COMEDI_JR3_PCI=m
< CONFIG_COMEDI_KE_COUNTER=m
< CONFIG_COMEDI_CB_PCIDAS64=m
< CONFIG_COMEDI_CB_PCIDAS=m
< CONFIG_COMEDI_CB_PCIDDA=m
< CONFIG_COMEDI_CB_PCIDIO=m
< CONFIG_COMEDI_CB_PCIMDAS=m
< CONFIG_COMEDI_CB_PCIMDDA=m
< CONFIG_COMEDI_ME4000=m
< CONFIG_COMEDI_ME_DAQ=m
< CONFIG_COMEDI_NI_6527=m
< CONFIG_COMEDI_NI_65XX=m
< CONFIG_COMEDI_NI_660X=m
< CONFIG_COMEDI_NI_670X=m
< CONFIG_COMEDI_NI_PCIDIO=m
< CONFIG_COMEDI_NI_PCIMIO=m
< CONFIG_COMEDI_RTD520=m
< CONFIG_COMEDI_S526=m
< CONFIG_COMEDI_S626=m
< CONFIG_COMEDI_SSV_DNP=m
< CONFIG_COMEDI_PCMCIA_DRIVERS=m
< CONFIG_COMEDI_CB_DAS16_CS=m
< CONFIG_COMEDI_DAS08_CS=m
< CONFIG_COMEDI_NI_DAQ_700_CS=m
< CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
< CONFIG_COMEDI_NI_LABPC_CS=m
< CONFIG_COMEDI_NI_MIO_CS=m
< CONFIG_COMEDI_QUATECH_DAQP_CS=m
< CONFIG_COMEDI_USB_DRIVERS=m
< CONFIG_COMEDI_DT9812=m
< CONFIG_COMEDI_USBDUX=m
< CONFIG_COMEDI_USBDUXFAST=m
< CONFIG_COMEDI_VMK80XX=m
< CONFIG_COMEDI_NI_COMMON=m
< CONFIG_COMEDI_MITE=m
< CONFIG_COMEDI_NI_TIO=m
< CONFIG_COMEDI_NI_LABPC=m
< CONFIG_COMEDI_8255=m
< CONFIG_COMEDI_DAS08=m
< CONFIG_COMEDI_FC=m
< CONFIG_FB_OLPC_DCON=m
< CONFIG_FB_OLPC_DCON_1=y
< CONFIG_FB_OLPC_DCON_1_5=y
< CONFIG_ASUS_OLED=m
< CONFIG_PANEL=m
< CONFIG_PANEL_PARPORT=0
< CONFIG_PANEL_PROFILE=5
< # CONFIG_PANEL_CHANGE_MESSAGE is not set
---
> # CONFIG_COMEDI is not set
> # CONFIG_ASUS_OLED is not set
> # CONFIG_PANEL is not set
5358,5361c4649,4651
< CONFIG_R8712_AP=y
< CONFIG_RTS_PSTOR=m
< # CONFIG_RTS_PSTOR_DEBUG is not set
< CONFIG_TRANZPORT=m
---
> # CONFIG_R8712_AP is not set
> # CONFIG_RTS_PSTOR is not set
> # CONFIG_TRANZPORT is not set
5367,5372c4657,4662
< CONFIG_LINE6_USB_DEBUG=y
< CONFIG_LINE6_USB_DUMP_CTRL=y
< CONFIG_LINE6_USB_DUMP_MIDI=y
< CONFIG_LINE6_USB_DUMP_PCM=y
< CONFIG_LINE6_USB_RAW=y
< CONFIG_LINE6_USB_IMPULSE_RESPONSE=y
---
> # CONFIG_LINE6_USB_DEBUG is not set
> # CONFIG_LINE6_USB_DUMP_CTRL is not set
> # CONFIG_LINE6_USB_DUMP_MIDI is not set
> # CONFIG_LINE6_USB_DUMP_PCM is not set
> # CONFIG_LINE6_USB_RAW is not set
> # CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
5388,5404c4678
< CONFIG_VME_BUS=m
< 
< #
< # VME Bridge Drivers
< #
< CONFIG_VME_CA91CX42=m
< CONFIG_VME_TSI148=m
< 
< #
< # VME Device Drivers
< #
< CONFIG_VME_USER=m
< 
< #
< # VME Board Drivers
< #
< CONFIG_VMIVME_7805=m
---
> # CONFIG_VME_BUS is not set
5406,5528c4680
< CONFIG_IIO=m
< CONFIG_IIO_RING_BUFFER=y
< CONFIG_IIO_SW_RING=m
< CONFIG_IIO_KFIFO_BUF=m
< CONFIG_IIO_TRIGGER=y
< 
< #
< # Accelerometers
< #
< CONFIG_ADIS16201=m
< CONFIG_ADIS16203=m
< CONFIG_ADIS16204=m
< CONFIG_ADIS16209=m
< CONFIG_ADIS16220=m
< CONFIG_ADIS16240=m
< CONFIG_KXSD9=m
< CONFIG_LIS3L02DQ=m
< CONFIG_LIS3L02DQ_BUF_KFIFO=y
< # CONFIG_LIS3L02DQ_BUF_RING_SW is not set
< CONFIG_SCA3000=m
< 
< #
< # Analog to digital convertors
< #
< CONFIG_MAX1363=m
< CONFIG_MAX1363_RING_BUFFER=y
< CONFIG_AD7150=m
< CONFIG_AD7152=m
< CONFIG_AD7291=m
< CONFIG_AD7298=m
< CONFIG_AD7314=m
< CONFIG_AD7606=m
< CONFIG_AD7606_IFACE_PARALLEL=m
< CONFIG_AD7606_IFACE_SPI=m
< CONFIG_AD799X=m
< CONFIG_AD799X_RING_BUFFER=y
< CONFIG_AD7476=m
< CONFIG_AD7887=m
< CONFIG_AD7745=m
< CONFIG_AD7816=m
< CONFIG_ADT75=m
< CONFIG_ADT7310=m
< CONFIG_ADT7410=m
< 
< #
< # Analog digital bi-direction convertors
< #
< CONFIG_ADT7316=m
< CONFIG_ADT7316_SPI=m
< CONFIG_ADT7316_I2C=m
< 
< #
< # Digital to analog convertors
< #
< CONFIG_AD5624R_SPI=m
< CONFIG_AD5446=m
< CONFIG_MAX517=m
< 
< #
< # Direct Digital Synthesis
< #
< CONFIG_AD5930=m
< CONFIG_AD9832=m
< CONFIG_AD9834=m
< CONFIG_AD9850=m
< CONFIG_AD9852=m
< CONFIG_AD9910=m
< CONFIG_AD9951=m
< 
< #
< # Digital gyroscope sensors
< #
< CONFIG_ADIS16060=m
< CONFIG_ADIS16080=m
< CONFIG_ADIS16130=m
< CONFIG_ADIS16260=m
< 
< #
< # Inertial measurement units
< #
< CONFIG_ADIS16300=m
< CONFIG_ADIS16350=m
< CONFIG_ADIS16400=m
< 
< #
< # Light sensors
< #
< CONFIG_SENSORS_TSL2563=m
< CONFIG_SENSORS_ISL29018=m
< 
< #
< # Magnetometer sensors
< #
< CONFIG_SENSORS_AK8975=m
< CONFIG_SENSORS_HMC5843=m
< 
< #
< # Active energy metering IC
< #
< CONFIG_ADE7753=m
< CONFIG_ADE7754=m
< CONFIG_ADE7758=m
< CONFIG_ADE7759=m
< CONFIG_ADE7854=m
< CONFIG_ADE7854_I2C=m
< CONFIG_ADE7854_SPI=m
< 
< #
< # Resolver to digital converters
< #
< CONFIG_AD2S90=m
< CONFIG_AD2S120X=m
< CONFIG_AD2S1210=m
< # CONFIG_AD2S1210_GPIO_INPUT is not set
< # CONFIG_AD2S1210_GPIO_OUTPUT is not set
< CONFIG_AD2S1210_GPIO_NONE=y
< 
< #
< # Triggers - standalone
< #
< CONFIG_IIO_PERIODIC_RTC_TRIGGER=m
< CONFIG_IIO_GPIO_TRIGGER=m
< CONFIG_IIO_SYSFS_TRIGGER=m
---
> # CONFIG_IIO is not set
5535c4687
< CONFIG_FB_SM7XX=y
---
> CONFIG_FB_SM7XX=m
5539,5541c4691,4692
< CONFIG_CXT1E1=m
< CONFIG_SBE_PMCC4_NCOMM=y
< CONFIG_FB_XGI=y
---
> # CONFIG_CXT1E1 is not set
> CONFIG_FB_XGI=m
5558c4709
< CONFIG_ACPI_QUICKSTART=y
---
> CONFIG_ACPI_QUICKSTART=m
5566,5578c4717,4722
< CONFIG_ATH6KL_ENABLE_COEXISTENCE=y
< CONFIG_AR600x_DUAL_ANTENNA=y
< # CONFIG_AR600x_SINGLE_ANTENNA is not set
< # CONFIG_AR600x_BT_QCOM is not set
< # CONFIG_AR600x_BT_CSR is not set
< CONFIG_AR600x_BT_AR3001=y
< CONFIG_ATH6KL_HCI_BRIDGE=y
< CONFIG_ATH6KL_CONFIG_GPIO_BT_RESET=y
< CONFIG_AR600x_BT_RESET_PIN=22
< CONFIG_ATH6KL_CFG80211=y
< CONFIG_ATH6KL_HTC_RAW_INTERFACE=y
< CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
< CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK=y
---
> # CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
> # CONFIG_ATH6KL_HCI_BRIDGE is not set
> # CONFIG_ATH6KL_CFG80211 is not set
> # CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
> # CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set
> # CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
5580,5584c4724,4726
< CONFIG_USB_ENESTORAGE=m
< CONFIG_BCM_WIMAX=m
< CONFIG_FT1000=m
< CONFIG_FT1000_USB=m
< CONFIG_FT1000_PCMCIA=m
---
> # CONFIG_USB_ENESTORAGE is not set
> # CONFIG_BCM_WIMAX is not set
> # CONFIG_FT1000 is not set
5589,5596c4731,4738
< CONFIG_SPEAKUP=m
< CONFIG_SPEAKUP_SYNTH_ACNTSA=m
< CONFIG_SPEAKUP_SYNTH_ACNTPC=m
< CONFIG_SPEAKUP_SYNTH_APOLLO=m
< CONFIG_SPEAKUP_SYNTH_AUDPTR=m
< CONFIG_SPEAKUP_SYNTH_BNS=m
< CONFIG_SPEAKUP_SYNTH_DECTLK=m
< CONFIG_SPEAKUP_SYNTH_DECEXT=m
---
> CONFIG_SPEAKUP=y
> CONFIG_SPEAKUP_SYNTH_ACNTSA=y
> CONFIG_SPEAKUP_SYNTH_ACNTPC=y
> CONFIG_SPEAKUP_SYNTH_APOLLO=y
> CONFIG_SPEAKUP_SYNTH_AUDPTR=y
> CONFIG_SPEAKUP_SYNTH_BNS=y
> CONFIG_SPEAKUP_SYNTH_DECTLK=y
> CONFIG_SPEAKUP_SYNTH_DECEXT=y
5598,5604c4740,4746
< CONFIG_SPEAKUP_SYNTH_DTLK=m
< CONFIG_SPEAKUP_SYNTH_KEYPC=m
< CONFIG_SPEAKUP_SYNTH_LTLK=m
< CONFIG_SPEAKUP_SYNTH_SOFT=m
< CONFIG_SPEAKUP_SYNTH_SPKOUT=m
< CONFIG_SPEAKUP_SYNTH_TXPRT=m
< CONFIG_SPEAKUP_SYNTH_DUMMY=m
---
> CONFIG_SPEAKUP_SYNTH_DTLK=y
> CONFIG_SPEAKUP_SYNTH_KEYPC=y
> CONFIG_SPEAKUP_SYNTH_LTLK=y
> CONFIG_SPEAKUP_SYNTH_SOFT=y
> CONFIG_SPEAKUP_SYNTH_SPKOUT=y
> CONFIG_SPEAKUP_SYNTH_TXPRT=y
> CONFIG_SPEAKUP_SYNTH_DUMMY=y
5607c4749
< CONFIG_DRM_PSB=m
---
> # CONFIG_DRM_PSB is not set
5614,5615c4756,4758
< CONFIG_ACER_WMI=y
< CONFIG_ACERHDF=y
---
> CONFIG_ACER_WMI=m
> CONFIG_ACERHDF=m
> CONFIG_ASUS_LAPTOP=m
5617,5619c4760,4762
< CONFIG_DELL_WMI=y
< CONFIG_DELL_WMI_AIO=y
< CONFIG_FUJITSU_LAPTOP=y
---
> CONFIG_DELL_WMI=m
> # CONFIG_DELL_WMI_AIO is not set
> CONFIG_FUJITSU_LAPTOP=m
5621,5627c4764,4770
< CONFIG_TC1100_WMI=y
< CONFIG_HP_ACCEL=y
< CONFIG_HP_WMI=y
< CONFIG_MSI_LAPTOP=y
< CONFIG_PANASONIC_LAPTOP=y
< CONFIG_COMPAL_LAPTOP=y
< CONFIG_SONY_LAPTOP=y
---
> CONFIG_TC1100_WMI=m
> # CONFIG_HP_ACCEL is not set
> CONFIG_HP_WMI=m
> CONFIG_MSI_LAPTOP=m
> CONFIG_PANASONIC_LAPTOP=m
> CONFIG_COMPAL_LAPTOP=m
> CONFIG_SONY_LAPTOP=m
5629,5630c4772,4774
< CONFIG_IDEAPAD_LAPTOP=y
< CONFIG_THINKPAD_ACPI=y
---
> CONFIG_IDEAPAD_LAPTOP=m
> CONFIG_THINKPAD_ACPI=m
> CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
5633c4777
< CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
---
> # CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
5636,5653c4780,4794
< CONFIG_SENSORS_HDAPS=y
< CONFIG_INTEL_MENLOW=y
< CONFIG_EEEPC_LAPTOP=y
< CONFIG_ASUS_WMI=y
< CONFIG_ASUS_NB_WMI=y
< CONFIG_EEEPC_WMI=y
< CONFIG_ACPI_WMI=y
< CONFIG_MSI_WMI=y
< CONFIG_ACPI_ASUS=y
< CONFIG_TOPSTAR_LAPTOP=y
< CONFIG_ACPI_TOSHIBA=y
< CONFIG_TOSHIBA_BT_RFKILL=y
< CONFIG_ACPI_CMPC=y
< CONFIG_INTEL_IPS=y
< CONFIG_IBM_RTL=y
< CONFIG_XO1_RFKILL=y
< CONFIG_XO15_EBOOK=y
< CONFIG_SAMSUNG_LAPTOP=y
---
> CONFIG_SENSORS_HDAPS=m
> CONFIG_INTEL_MENLOW=m
> CONFIG_EEEPC_LAPTOP=m
> # CONFIG_ASUS_WMI is not set
> CONFIG_ACPI_WMI=m
> CONFIG_MSI_WMI=m
> CONFIG_ACPI_ASUS=m
> CONFIG_TOPSTAR_LAPTOP=m
> CONFIG_ACPI_TOSHIBA=m
> CONFIG_TOSHIBA_BT_RFKILL=m
> CONFIG_ACPI_CMPC=m
> CONFIG_INTEL_IPS=m
> # CONFIG_IBM_RTL is not set
> # CONFIG_XO15_EBOOK is not set
> CONFIG_SAMSUNG_LAPTOP=m
5658,5659c4799,4800
< CONFIG_EDD=y
< # CONFIG_EDD_OFF is not set
---
> CONFIG_EDD=m
> CONFIG_EDD_OFF=y
5661c4802
< # CONFIG_EFI_VARS is not set
---
> CONFIG_EFI_VARS=m
5665c4806
< CONFIG_DMI_SYSFS=y
---
> # CONFIG_DMI_SYSFS is not set
5667c4808
< CONFIG_ISCSI_IBFT=y
---
> CONFIG_ISCSI_IBFT=m
5677c4818
< CONFIG_EXT2_FS_XIP=y
---
> # CONFIG_EXT2_FS_XIP is not set
5688d4828
< CONFIG_FS_XIP=y
5708c4848
< CONFIG_XFS_RT=y
---
> # CONFIG_XFS_RT is not set
5720c4860
< CONFIG_NILFS2_FS=y
---
> CONFIG_NILFS2_FS=m
5734c4874
< CONFIG_QFMT_V1=y
---
> CONFIG_QFMT_V1=m
5737,5739c4877,4879
< CONFIG_AUTOFS4_FS=y
< CONFIG_FUSE_FS=y
< CONFIG_CUSE=y
---
> CONFIG_AUTOFS4_FS=m
> CONFIG_FUSE_FS=m
> CONFIG_CUSE=m
5745,5747c4885,4887
< CONFIG_FSCACHE=y
< CONFIG_FSCACHE_STATS=y
< CONFIG_FSCACHE_HISTOGRAM=y
---
> CONFIG_FSCACHE=m
> # CONFIG_FSCACHE_STATS is not set
> # CONFIG_FSCACHE_HISTOGRAM is not set
5750c4890
< CONFIG_CACHEFILES=y
---
> CONFIG_CACHEFILES=m
5752c4892
< CONFIG_CACHEFILES_HISTOGRAM=y
---
> # CONFIG_CACHEFILES_HISTOGRAM is not set
5785,5786c4925,4926
< CONFIG_HUGETLBFS=y
< CONFIG_HUGETLB_PAGE=y
---
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
5789,5795c4929,4935
< CONFIG_ADFS_FS=y
< CONFIG_ADFS_FS_RW=y
< CONFIG_AFFS_FS=y
< CONFIG_ECRYPT_FS=y
< CONFIG_HFS_FS=y
< CONFIG_HFSPLUS_FS=y
< CONFIG_BEFS_FS=y
---
> CONFIG_ADFS_FS=m
> # CONFIG_ADFS_FS_RW is not set
> CONFIG_AFFS_FS=m
> # CONFIG_ECRYPT_FS is not set
> CONFIG_HFS_FS=m
> CONFIG_HFSPLUS_FS=m
> CONFIG_BEFS_FS=m
5797,5799c4937,4939
< CONFIG_BFS_FS=y
< CONFIG_EFS_FS=y
< CONFIG_JFFS2_FS=y
---
> CONFIG_BFS_FS=m
> CONFIG_EFS_FS=m
> CONFIG_JFFS2_FS=m
5802,5807c4942,4945
< CONFIG_JFFS2_FS_WBUF_VERIFY=y
< CONFIG_JFFS2_SUMMARY=y
< CONFIG_JFFS2_FS_XATTR=y
< CONFIG_JFFS2_FS_POSIX_ACL=y
< CONFIG_JFFS2_FS_SECURITY=y
< CONFIG_JFFS2_COMPRESSION_OPTIONS=y
---
> # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> # CONFIG_JFFS2_SUMMARY is not set
> # CONFIG_JFFS2_FS_XATTR is not set
> # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
5809c4947
< CONFIG_JFFS2_LZO=y
---
> # CONFIG_JFFS2_LZO is not set
5811,5816c4949,4950
< CONFIG_JFFS2_RUBIN=y
< # CONFIG_JFFS2_CMODE_NONE is not set
< CONFIG_JFFS2_CMODE_PRIORITY=y
< # CONFIG_JFFS2_CMODE_SIZE is not set
< # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
< CONFIG_UBIFS_FS=y
---
> # CONFIG_JFFS2_RUBIN is not set
> CONFIG_UBIFS_FS=m
5822,5824c4956,4958
< CONFIG_LOGFS=y
< CONFIG_CRAMFS=y
< CONFIG_SQUASHFS=y
---
> CONFIG_LOGFS=m
> CONFIG_CRAMFS=m
> CONFIG_SQUASHFS=m
5827c4961
< # CONFIG_SQUASHFS_XZ is not set
---
> CONFIG_SQUASHFS_XZ=y
5830,5834c4964,4968
< CONFIG_VXFS_FS=y
< CONFIG_MINIX_FS=y
< CONFIG_OMFS_FS=y
< CONFIG_HPFS_FS=y
< CONFIG_QNX4FS_FS=y
---
> CONFIG_VXFS_FS=m
> CONFIG_MINIX_FS=m
> CONFIG_OMFS_FS=m
> CONFIG_HPFS_FS=m
> CONFIG_QNX4FS_FS=m
5836,5838c4970
< # CONFIG_ROMFS_BACKED_BY_BLOCK is not set
< # CONFIG_ROMFS_BACKED_BY_MTD is not set
< CONFIG_ROMFS_BACKED_BY_BOTH=y
---
> CONFIG_ROMFS_BACKED_BY_BLOCK=y
5840d4971
< CONFIG_ROMFS_ON_MTD=y
5842,5844c4973,4975
< CONFIG_SYSV_FS=y
< CONFIG_UFS_FS=y
< CONFIG_UFS_FS_WRITE=y
---
> CONFIG_SYSV_FS=m
> CONFIG_UFS_FS=m
> # CONFIG_UFS_FS_WRITE is not set
5846c4977
< CONFIG_EXOFS_FS=y
---
> CONFIG_EXOFS_FS=m
5851c4982
< CONFIG_NFS_V3_ACL=y
---
> # CONFIG_NFS_V3_ACL is not set
5853,5858c4984,4987
< CONFIG_NFS_V4_1=y
< CONFIG_PNFS_FILE_LAYOUT=y
< CONFIG_ROOT_NFS=y
< CONFIG_NFS_FSCACHE=y
< CONFIG_NFS_USE_LEGACY_DNS=y
< CONFIG_NFS_USE_NEW_IDMAPPER=y
---
> # CONFIG_NFS_V4_1 is not set
> # CONFIG_NFS_USE_LEGACY_DNS is not set
> CONFIG_NFS_USE_KERNEL_DNS=y
> # CONFIG_NFS_USE_NEW_IDMAPPER is not set
5861d4989
< CONFIG_NFSD_V2_ACL=y
5863c4991
< CONFIG_NFSD_V3_ACL=y
---
> # CONFIG_NFSD_V3_ACL is not set
5867d4994
< CONFIG_NFS_ACL_SUPPORT=y
5873,5876c5000,5002
< CONFIG_CEPH_FS=y
< CONFIG_CIFS=y
< CONFIG_CIFS_STATS=y
< CONFIG_CIFS_STATS2=y
---
> CONFIG_CEPH_FS=m
> CONFIG_CIFS=m
> # CONFIG_CIFS_STATS is not set
5878,5880c5004,5005
< CONFIG_CIFS_UPCALL=y
< CONFIG_CIFS_XATTR=y
< CONFIG_CIFS_POSIX=y
---
> # CONFIG_CIFS_UPCALL is not set
> # CONFIG_CIFS_XATTR is not set
5882c5007
< CONFIG_CIFS_DFS_UPCALL=y
---
> # CONFIG_CIFS_DFS_UPCALL is not set
5884,5886c5009,5010
< CONFIG_CIFS_ACL=y
< CONFIG_CIFS_EXPERIMENTAL=y
< CONFIG_NCP_FS=y
---
> # CONFIG_CIFS_EXPERIMENTAL is not set
> CONFIG_NCP_FS=m
5895,5896c5019,5020
< CONFIG_CODA_FS=y
< CONFIG_AFS_FS=y
---
> CONFIG_CODA_FS=m
> CONFIG_AFS_FS=m
5898c5022
< CONFIG_AFS_FSCACHE=y
---
> # CONFIG_AFS_FSCACHE is not set
5900,5901c5024,5025
< CONFIG_9P_FSCACHE=y
< CONFIG_9P_FS_POSIX_ACL=y
---
> # CONFIG_9P_FSCACHE is not set
> # CONFIG_9P_FS_POSIX_ACL is not set
5907,5913c5031
< CONFIG_ACORN_PARTITION=y
< CONFIG_ACORN_PARTITION_CUMANA=y
< CONFIG_ACORN_PARTITION_EESOX=y
< CONFIG_ACORN_PARTITION_ICS=y
< CONFIG_ACORN_PARTITION_ADFS=y
< CONFIG_ACORN_PARTITION_POWERTEC=y
< CONFIG_ACORN_PARTITION_RISCIX=y
---
> # CONFIG_ACORN_PARTITION is not set
5916c5034
< CONFIG_ATARI_PARTITION=y
---
> # CONFIG_ATARI_PARTITION is not set
5923,5924c5041
< CONFIG_LDM_PARTITION=y
< CONFIG_LDM_DEBUG=y
---
> # CONFIG_LDM_PARTITION is not set
5926c5043
< CONFIG_ULTRIX_PARTITION=y
---
> # CONFIG_ULTRIX_PARTITION is not set
5930c5047
< CONFIG_SYSV68_PARTITION=y
---
> # CONFIG_SYSV68_PARTITION is not set
5936,5937c5053,5054
< CONFIG_NLS_CODEPAGE_850=y
< CONFIG_NLS_CODEPAGE_852=y
---
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
5940c5057
< CONFIG_NLS_CODEPAGE_860=y
---
> CONFIG_NLS_CODEPAGE_860=m
5942c5059
< # CONFIG_NLS_CODEPAGE_862 is not set
---
> CONFIG_NLS_CODEPAGE_862=m
5944c5061
< CONFIG_NLS_CODEPAGE_864=y
---
> CONFIG_NLS_CODEPAGE_864=m
5946c5063
< CONFIG_NLS_CODEPAGE_866=y
---
> CONFIG_NLS_CODEPAGE_866=m
5948c5065
< CONFIG_NLS_CODEPAGE_936=y
---
> CONFIG_NLS_CODEPAGE_936=m
5950c5067
< CONFIG_NLS_CODEPAGE_932=y
---
> CONFIG_NLS_CODEPAGE_932=m
5953c5070
< # CONFIG_NLS_ISO8859_8 is not set
---
> CONFIG_NLS_ISO8859_8=m
5961,5962c5078,5079
< CONFIG_NLS_ISO8859_5=y
< CONFIG_NLS_ISO8859_6=y
---
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
5967,5968c5084,5085
< CONFIG_NLS_ISO8859_15=y
< CONFIG_NLS_KOI8_R=y
---
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
5978c5095
< # CONFIG_PRINTK_TIME is not set
---
> CONFIG_PRINTK_TIME=y
5984c5101
< # CONFIG_STRIP_ASM_SYMS is not set
---
> CONFIG_STRIP_ASM_SYMS=y
5989c5106,5108
< # CONFIG_DEBUG_KERNEL is not set
---
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> # CONFIG_LOCKUP_DETECTOR is not set
5990a5110,5116
> CONFIG_DETECT_HUNG_TASK=y
> # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
> CONFIG_SCHED_DEBUG=y
> # CONFIG_SCHEDSTATS is not set
> CONFIG_TIMER_STATS=y
> # CONFIG_DEBUG_OBJECTS is not set
5992a5119,5125
> # CONFIG_DEBUG_KMEMLEAK is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
5993a5127,5129
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
5994a5131,5132
> # CONFIG_DEBUG_KOBJECT is not set
> # CONFIG_DEBUG_HIGHMEM is not set
5995a5134,5137
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_VIRTUAL is not set
> # CONFIG_DEBUG_WRITECOUNT is not set
5996a5139,5143
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_TEST_LIST_SORT is not set
> # CONFIG_DEBUG_SG is not set
> # CONFIG_DEBUG_NOTIFIERS is not set
> # CONFIG_DEBUG_CREDENTIALS is not set
5998a5146,5147
> # CONFIG_BOOT_PRINTK_DELAY is not set
> # CONFIG_RCU_TORTURE_TEST is not set
5999a5149,5151
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
6001c5153,5157
< CONFIG_SYSCTL_SYSCALL_CHECK=y
---
> CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
> # CONFIG_FAULT_INJECTION is not set
> # CONFIG_LATENCYTOP is not set
> # CONFIG_SYSCTL_SYSCALL_CHECK is not set
> # CONFIG_DEBUG_PAGEALLOC is not set
6003a5160
> CONFIG_HAVE_FTRACE_NMI_ENTER=y
6012a5170
> CONFIG_FTRACE_NMI_ENTER=y
6021a5180
> CONFIG_FUNCTION_GRAPH_TRACER=y
6029,6030c5188,5189
< # CONFIG_BLK_DEV_IO_TRACE is not set
< # CONFIG_DYNAMIC_FTRACE is not set
---
> CONFIG_BLK_DEV_IO_TRACE=y
> CONFIG_DYNAMIC_FTRACE=y
6031a5191
> CONFIG_FTRACE_MCOUNT_RECORD=y
6034c5194
< # CONFIG_RING_BUFFER_BENCHMARK is not set
---
> CONFIG_RING_BUFFER_BENCHMARK=m
6039,6040c5199,5200
< # CONFIG_ATOMIC64_SELFTEST is not set
< CONFIG_ASYNC_RAID6_TEST=y
---
> CONFIG_ATOMIC64_SELFTEST=y
> CONFIG_ASYNC_RAID6_TEST=m
6042a5203
> # CONFIG_KGDB is not set
6048a5210,5215
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_DEBUG_PER_CPU_MAPS is not set
> # CONFIG_X86_PTDUMP is not set
> CONFIG_DEBUG_RODATA=y
> CONFIG_DEBUG_RODATA_TEST=y
6049a5217
> # CONFIG_DEBUG_NX_TEST is not set
6062c5230,5233
< # CONFIG_OPTIMIZE_INLINING is not set
---
> # CONFIG_DEBUG_BOOT_PARAMS is not set
> # CONFIG_CPA_DEBUG is not set
> CONFIG_OPTIMIZE_INLINING=y
> # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
6068c5239,5240
< # CONFIG_TRUSTED_KEYS is not set
---
> CONFIG_TRUSTED_KEYS=m
> CONFIG_ENCRYPTED_KEYS=m
6070c5242
< # CONFIG_SECURITY_DMESG_RESTRICT is not set
---
> CONFIG_SECURITY_DMESG_RESTRICT=y
6076d5247
< # CONFIG_INTEL_TXT is not set
6078d5248
< # CONFIG_SECURITY_SMACK is not set
6194c5364
< CONFIG_CRYPTO_LZO=y
---
> CONFIG_CRYPTO_LZO=m
6220c5390
< # CONFIG_KVM_MMU_AUDIT is not set
---
> CONFIG_KVM_MMU_AUDIT=y
6222,6224c5392,5394
< # CONFIG_LGUEST is not set
< CONFIG_VIRTIO=y
< CONFIG_VIRTIO_RING=y
---
> CONFIG_LGUEST=m
> CONFIG_VIRTIO=m
> CONFIG_VIRTIO_RING=m
6237c5407
< CONFIG_CRC_CCITT=y
---
> CONFIG_CRC_CCITT=m
6239c5409
< CONFIG_CRC_T10DIF=y
---
> CONFIG_CRC_T10DIF=m
6242c5412
< CONFIG_CRC7=y
---
> CONFIG_CRC7=m
6264c5434
< CONFIG_REED_SOLOMON=y
---
> CONFIG_REED_SOLOMON=m
6266d5435
< CONFIG_BCH=y
6278c5447
< CONFIG_LRU_CACHE=y
---
> CONFIG_LRU_CACHE=m
---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

2011/5/1 werner <w.landgraf@ru.ru>:
>
> But, now, the 2nd compilation, I made with the slackware huge configuration.
> And this works !! It boots normally, and it also don't crash  if unzipping
> big files.  So you were right, to use a more little config, for find out
> better the reason.

Ok, good. Now we have confirmation that it's not the SATA driver
itself that causes problems, it's some other driver.

So what I'd suggest you try to do is a "config bisect" to see exactly
_what_ config option it is that makes things break. Steve Rostedt
wrote a tool ("ktest") for this exact thing, but I'm not entirely sure
that it will work for your situation. I've added Steve to the email
participants, and I'd suggest you read up on it:

  http://lwn.net/Articles/414064/

would seem to be a good starting point.

Of course, you could just try to do it manually too - just turn one
subsystem at a time from a module in the working slackware config into
a compiled-in thing, so that eventually you end up with the
non-working "almost everything compiled in" case. And see which
subsystem it is that causes problems.

And then when you find the subsystem that makes the problem re-appear,
you'd need to go back and try each driver at a time.

                         Linus

Re: 2.6.39-rc5-git2 boot crashs

[werner]

Yes, my kernel compiling / packaging / lilo.conf-writing 
script   always do this: it makes 3 manners for boot: 
 normal/grafics, text, initrd;  for this it makes an 
initrd too.  See below.  Normally this also works without 
any problem. This is necessary if someone want to make an 
installer. And just because of this, I compile plenty 
things inside vmlinuz , not as modules, because nowadays 
people have any kind of devices with touchpad, touchscreen 
etc.  And, last night, I tested all these boot methods, 
but in all attempts happened that error, that it didnt 
find the boot device, and then crashs, more strange 
because there also is a bootwait option in the command 
line (see below) (because nowadays people often have 
installed my distro on an usb key, or on an eee pc just 
the starter is on the internel flash chip, and the system 
with root fs is on an usb harddisk what takes time to be 
discovered).


But, now, the 2nd compilation, I made with the slackware 
huge configuration. And this works !! It boots normally, 
and it also don't crash  if unzipping big files.  So you 
were right, to use a more little config, for find out 
better the reason.   However, remember, at the end (until 
-rc20) also the everythingyes config should work, because 
this always was the case, and have to work because 
nowadays people have all kinds of computers, laptops, 
phones, coffe machines, washmachines etc etc running Linux 
and the distro kernel have to run ANYWAY on ANY DEVICE.


That successful slackware huge config is in the middle 
between the slackware smp config explained above which 
didnt boot, and between my normal everythingyes 
configuration which gave plenty problems.  So,  the 
differences to both sides can make it more easy to find 
out, a) why the slackware smp config didnt boot at all, 
not finding the root fs,    and to the other side, why b) 
my everythingyes config, which all the time worked (also 
on 2.6.34.8), give so many problems with 2.6.39-rcX.

Pls find, enclosed, as the 2nd file, the successful config 
which is still running on my computer and didnt crash yet 
(entering with slackware huge smp into menuconfig end 
going out without changes).  Also, as the 3rd file, is the 
difference of this to my everythingyes config used for 
-git2 to -git4; from tese differences it should be 
possible to find better what cause the many problems in 
the sense of comparison b) above.

However, I should mention, that this successful config has 
a problem with the grafics. On the laptop of my neighbour, 
it switched to a wrong text mode where the characters are 
little and 3 times on the top of the screen. And on my 
computer, I cannot change to the text screen with 
CTRL-ALT-F1 etc.


wl



---
Professional hosting for everyone - http://www.host.ru

Re: 2.6.39-rc5-git2 boot crashs

[Linus Torvalds]

On Sat, Apr 30, 2011 at 6:52 PM, werner <w.landgraf@ru.ru> wrote:
>
> Enclosed is still the /var/log/debug file.

Can you please just do what I asked to, namely do the minimal config.

That will also make it _much_ faster for you to compile the kernel
(you can probably do it in 10 minutes or less if you just get a really
nice config that only has the stuff you actually require - on my
machine I compile my kernel in about 3 minutes from scratch).

And not only would it tell us something (namely whether the problem
persists or not), but if it _does_ persist even with a minimal kernel
that only has the drivers you need, it would make it much more
feasible to do a bisect because now the compile/test cycle would be
much shorter.

So please, just do it.  Because quite frankly, by now you're mainly
just wasting everybody's time.

>  UNFORTUNATELY, IT DONT SHOWS THE
> KERNEL VERSION (THIS IS SOMETHING WHAT YOU COULD CORRECT !!!)

The kernel version shows up in dmesg as the very first thing. Something like

[    0.000000] Linux version 2.6.39-rc5-00127-g1be6a1f89f13
(torvalds@i5.linux-foundation.org) (gcc version 4.5.1 20100924 (Red
Hat 4.5.1-4) (GCC) ) #9 SMP PREEMPT Fri Apr 29 16:28:05 PDT 2011

You've just lost it, possibly because your dmesg file ended up growing
too large, or possibly because some tool just didn't bother to save
it.

                        Linus

2.6.39-rc5-git2 boot crashs

[werner]

[-- Attachment #1: Type: text/plain, Size: 549 bytes --]

Enclosed is still the /var/log/debug file.  UNFORTUNATELY, 
IT DONT SHOWS THE KERNEL VERSION (THIS IS SOMETHING WHAT 
YOU COULD CORRECT !!!)  The boots of today 14:17:43 and 
21:00:01 are using 2.6.38.4 (during the 1st run, I 
compiled/packaged 2.6.39-rc5-git4 without problems, the 
2nd is running actually), between them were runs with 
2.6.39-rc5-git4 ON WHICH IS DEBUG (in the kernel hacker 
config) SWITCHED ON  (on 2.6.38.4 it's NOT switched on). 
   Perhaps thats helpful anyhow.
wl
---
Professional hosting for everyone - http://www.host.ru

[-- Attachment #2: debug.bz2 --]
[-- Type: application/octet-stream, Size: 247629 bytes --]