* [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check
@ 2021-01-19 12:07 Nitin Rawat
2021-01-19 12:08 ` Can Guo
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Nitin Rawat @ 2021-01-19 12:07 UTC (permalink / raw)
To: cang, asutoshd, stummala, vbadigan, alim.akhtar, avri.altman,
jejb, martin.petersen, stanley.chu, beanhuo
Cc: linux-scsi, linux-kernel, Nitin Rawat
As per JESD223D UFS HCI v3.0 spec, HCI version 3.0
is also supported. Hence Adding UFS3.0 in UFS HCI
version check to avoid logging of the error message.
Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 5 +++--
drivers/scsi/ufs/ufshci.h | 1 +
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 82ad317..54ca765 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -9255,8 +9255,9 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
if ((hba->ufs_version != UFSHCI_VERSION_10) &&
(hba->ufs_version != UFSHCI_VERSION_11) &&
(hba->ufs_version != UFSHCI_VERSION_20) &&
- (hba->ufs_version != UFSHCI_VERSION_21))
- dev_err(hba->dev, "invalid UFS version 0x%x\n",
+ (hba->ufs_version != UFSHCI_VERSION_21) &&
+ (hba->ufs_version != UFSHCI_VERSION_30))
+ dev_err(hba->dev, "invalid UFS HCI version 0x%x\n",
hba->ufs_version);
/* Get Interrupt bit mask per version */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 6795e1f..48f6c19 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -80,6 +80,7 @@ enum {
UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
+ UFSHCI_VERSION_30 = 0x00000300, /* 3.0 */
};
/*
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check
2021-01-19 12:07 [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check Nitin Rawat
@ 2021-01-19 12:08 ` Can Guo
2021-01-29 18:27 ` Martin K. Petersen
2021-01-29 19:25 ` Bean Huo
2 siblings, 0 replies; 5+ messages in thread
From: Can Guo @ 2021-01-19 12:08 UTC (permalink / raw)
To: Nitin Rawat
Cc: asutoshd, stummala, vbadigan, alim.akhtar, avri.altman, jejb,
martin.petersen, stanley.chu, beanhuo, linux-scsi, linux-kernel
On 2021-01-19 20:07, Nitin Rawat wrote:
> As per JESD223D UFS HCI v3.0 spec, HCI version 3.0
> is also supported. Hence Adding UFS3.0 in UFS HCI
> version check to avoid logging of the error message.
>
Reviewed-by: Can Guo <cang@codeaurora.org>
> Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
> ---
> drivers/scsi/ufs/ufshcd.c | 5 +++--
> drivers/scsi/ufs/ufshci.h | 1 +
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 82ad317..54ca765 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -9255,8 +9255,9 @@ int ufshcd_init(struct ufs_hba *hba, void
> __iomem *mmio_base, unsigned int irq)
> if ((hba->ufs_version != UFSHCI_VERSION_10) &&
> (hba->ufs_version != UFSHCI_VERSION_11) &&
> (hba->ufs_version != UFSHCI_VERSION_20) &&
> - (hba->ufs_version != UFSHCI_VERSION_21))
> - dev_err(hba->dev, "invalid UFS version 0x%x\n",
> + (hba->ufs_version != UFSHCI_VERSION_21) &&
> + (hba->ufs_version != UFSHCI_VERSION_30))
> + dev_err(hba->dev, "invalid UFS HCI version 0x%x\n",
> hba->ufs_version);
>
> /* Get Interrupt bit mask per version */
> diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
> index 6795e1f..48f6c19 100644
> --- a/drivers/scsi/ufs/ufshci.h
> +++ b/drivers/scsi/ufs/ufshci.h
> @@ -80,6 +80,7 @@ enum {
> UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
> UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
> UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
> + UFSHCI_VERSION_30 = 0x00000300, /* 3.0 */
> };
>
> /*
> --
> 2.7.4
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check
2021-01-19 12:07 [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check Nitin Rawat
2021-01-19 12:08 ` Can Guo
@ 2021-01-29 18:27 ` Martin K. Petersen
2021-01-29 19:25 ` Bean Huo
2 siblings, 0 replies; 5+ messages in thread
From: Martin K. Petersen @ 2021-01-29 18:27 UTC (permalink / raw)
To: Nitin Rawat
Cc: cang, asutoshd, stummala, vbadigan, alim.akhtar, avri.altman,
jejb, martin.petersen, stanley.chu, beanhuo, linux-scsi,
linux-kernel
Hello Nitin!
> As per JESD223D UFS HCI v3.0 spec, HCI version 3.0
> is also supported. Hence Adding UFS3.0 in UFS HCI
> version check to avoid logging of the error message.
https://lkml.org/lkml/2020/4/27/192
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check
2021-01-19 12:07 [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check Nitin Rawat
2021-01-19 12:08 ` Can Guo
2021-01-29 18:27 ` Martin K. Petersen
@ 2021-01-29 19:25 ` Bean Huo
2021-02-01 9:02 ` nitirawa
2 siblings, 1 reply; 5+ messages in thread
From: Bean Huo @ 2021-01-29 19:25 UTC (permalink / raw)
To: Nitin Rawat, cang, asutoshd, stummala, vbadigan, alim.akhtar,
avri.altman, jejb, martin.petersen, stanley.chu, beanhuo
Cc: linux-scsi, linux-kernel
On Tue, 2021-01-19 at 17:37 +0530, Nitin Rawat wrote:
> As per JESD223D UFS HCI v3.0 spec, HCI version 3.0
> is also supported. Hence Adding UFS3.0 in UFS HCI
> version check to avoid logging of the error message.
>
> Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
> ---
> drivers/scsi/ufs/ufshcd.c | 5 +++--
> drivers/scsi/ufs/ufshci.h | 1 +
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 82ad317..54ca765 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -9255,8 +9255,9 @@ int ufshcd_init(struct ufs_hba *hba, void
> __iomem *mmio_base, unsigned int irq)
> if ((hba->ufs_version != UFSHCI_VERSION_10) &&
> (hba->ufs_version != UFSHCI_VERSION_11) &&
> (hba->ufs_version != UFSHCI_VERSION_20) &&
> - (hba->ufs_version != UFSHCI_VERSION_21))
> - dev_err(hba->dev, "invalid UFS version 0x%x\n",
> + (hba->ufs_version != UFSHCI_VERSION_21) &&
> + (hba->ufs_version != UFSHCI_VERSION_30))
> + dev_err(hba->dev, "invalid UFS HCI version 0x%x\n",
> hba->ufs_version);
Hi Nitin
Except HCI 1.0 / 1.1 / 2.0 / 2.1 / 3.0, do you have the other UFS HCI
version? if no, current driver supports all of them, instead of
scaling these check, and avoid logging of the error message, I suggest
you can directly delete these redundant checkup.
If there is a weird HCI version that not supported by the current
driver, you can only add an unsupported checkup list. thus, you don't
need to scale this useless checkup.
Bean
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check
2021-01-29 19:25 ` Bean Huo
@ 2021-02-01 9:02 ` nitirawa
0 siblings, 0 replies; 5+ messages in thread
From: nitirawa @ 2021-02-01 9:02 UTC (permalink / raw)
To: Bean Huo
Cc: cang, asutoshd, stummala, vbadigan, alim.akhtar, avri.altman,
jejb, martin.petersen, stanley.chu, beanhuo, linux-scsi,
linux-kernel, nitirawa
On 2021-01-30 00:55, Bean Huo wrote:
> On Tue, 2021-01-19 at 17:37 +0530, Nitin Rawat wrote:
>> As per JESD223D UFS HCI v3.0 spec, HCI version 3.0
>> is also supported. Hence Adding UFS3.0 in UFS HCI
>> version check to avoid logging of the error message.
>>
>> Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
>> ---
>> drivers/scsi/ufs/ufshcd.c | 5 +++--
>> drivers/scsi/ufs/ufshci.h | 1 +
>> 2 files changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index 82ad317..54ca765 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -9255,8 +9255,9 @@ int ufshcd_init(struct ufs_hba *hba, void
>> __iomem *mmio_base, unsigned int irq)
>> if ((hba->ufs_version != UFSHCI_VERSION_10) &&
>> (hba->ufs_version != UFSHCI_VERSION_11) &&
>> (hba->ufs_version != UFSHCI_VERSION_20) &&
>> - (hba->ufs_version != UFSHCI_VERSION_21))
>> - dev_err(hba->dev, "invalid UFS version 0x%x\n",
>> + (hba->ufs_version != UFSHCI_VERSION_21) &&
>> + (hba->ufs_version != UFSHCI_VERSION_30))
>> + dev_err(hba->dev, "invalid UFS HCI version 0x%x\n",
>> hba->ufs_version);
>
> Hi Nitin
> Except HCI 1.0 / 1.1 / 2.0 / 2.1 / 3.0, do you have the other UFS HCI
> version? if no, current driver supports all of them, instead of
> scaling these check, and avoid logging of the error message, I suggest
> you can directly delete these redundant checkup.
>
> If there is a weird HCI version that not supported by the current
> driver, you can only add an unsupported checkup list. thus, you don't
> need to scale this useless checkup.
>
> Bean
Hi Bean,
That's a good suggestion. If nobody has any concern, i will
post new patchset by removing these redundant check.
Regards,
Nitin
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-02-01 9:04 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-19 12:07 [PATCH V2] scsi: ufs: Add UFS3.0 in ufs HCI version check Nitin Rawat
2021-01-19 12:08 ` Can Guo
2021-01-29 18:27 ` Martin K. Petersen
2021-01-29 19:25 ` Bean Huo
2021-02-01 9:02 ` nitirawa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).