[PATCH v3 0/6] Add ACPI NUMA support for RISC-V

[PATCH v3 0/6] Add ACPI NUMA support for RISC-V

[Haibo Xu]

This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].

Patch 1/6 is generated from the acpica PR[2] and should be merged through
the acpica project. Due to this dependency, other 5 patches can only be
merged after the corresponding ACPICA patch was pulled into linux.

Patch 2/6 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 3/6 add the common SRAT RINTC affinity structure handler.
Patch 4/6 remove the '#if defined(CONFIG_ARCH)' condition to make some NUMA
related parse functions common for all current architectures that support
ACPI_NUMA.
Patch 5/6 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform. 
Patch 6/6 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.  

Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next

[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
[2] https://github.com/acpica/acpica/pull/926

Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
   https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0

2) Build latest EDK-II
   https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md

3) Build Linux with the following configs enabled
   CONFIG_RISCV_SBI_V01=y
   CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
   CONFIG_NONPORTABLE=y
   CONFIG_HVC_RISCV_SBI=y
   CONFIG_NUMA=y
   CONFIG_ACPI_NUMA=y

4) Build buildroot rootfs.cpio

5) Launch the Qemu machine
   qemu-system-riscv64 -nographic \
   -machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \
   -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
   -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
   -object memory-backend-ram,size=4G,id=m0 \
   -object memory-backend-ram,size=4G,id=m1 \
   -numa node,memdev=m0,cpus=0-1,nodeid=0 \
   -numa node,memdev=m1,cpus=2-3,nodeid=1 \
   -numa dist,src=0,dst=1,val=30 \
   -kernel linux/arch/riscv/boot/Image \
   -initrd buildroot/output/images/rootfs.cpio \
   -append "root=/dev/ram ro console=hvc0 earlycon=sbi"

[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff]
[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff]
[    0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff]
...
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1

---
Changes since v2
  - Rebase to Linux 6.9-rc1
  - changed ACPI_NUMA to a hidden option in patch 5/6 per Arnd's suggestion
  - Removed original 6/6 which was not needed with changes in patch 5/6
  - Added a new patch 6/6 to replace pr_info to pr_debug in arch_acpi_numa_init

Haibo Xu (6):
  ACPICA: SRAT: Add RISC-V RINTC affinity structure
  ACPI: RISCV: Add NUMA support based on SRAT and SLIT
  ACPI: NUMA: Add handler for SRAT RINTC affinity structure
  ACPI: NUMA: Make some NUMA related parse functions common
  ACPI: NUMA: change the ACPI_NUMA to a hidden option
  ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init

 arch/arm64/Kconfig            |   1 -
 arch/loongarch/Kconfig        |   1 -
 arch/riscv/include/asm/acpi.h |  15 +++-
 arch/riscv/kernel/Makefile    |   1 +
 arch/riscv/kernel/acpi.c      |   5 --
 arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++
 arch/riscv/kernel/setup.c     |   4 +-
 arch/riscv/kernel/smpboot.c   |   2 -
 drivers/acpi/numa/Kconfig     |   5 +-
 drivers/acpi/numa/srat.c      |  40 ++++++++---
 drivers/base/arch_numa.c      |   2 +-
 include/acpi/actbl3.h         |  18 ++++-
 include/linux/acpi.h          |   6 ++
 13 files changed, 204 insertions(+), 27 deletions(-)
 create mode 100644 arch/riscv/kernel/acpi_numa.c

-- 
2.34.1

[PATCH v3 1/6] ACPICA: SRAT: Add RISC-V RINTC affinity structure

[Haibo Xu]

ACPICA commit 93caddbf2f620769052c59ec471f018281dc3a24

Add definition of RISC-V Interrupt Controller(RINTC)
affinity structure which was approved by UEFI forum
and will be part of next ACPI spec version(6.6).

Link: https://github.com/acpica/acpica/commit/93caddbf
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
---
 include/acpi/actbl3.h | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index c080d579a546..5202e3fc9b41 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -192,7 +192,8 @@ enum acpi_srat_type {
 	ACPI_SRAT_TYPE_GIC_ITS_AFFINITY = 4,	/* ACPI 6.2 */
 	ACPI_SRAT_TYPE_GENERIC_AFFINITY = 5,	/* ACPI 6.3 */
 	ACPI_SRAT_TYPE_GENERIC_PORT_AFFINITY = 6,	/* ACPI 6.4 */
-	ACPI_SRAT_TYPE_RESERVED = 7	/* 7 and greater are reserved */
+	ACPI_SRAT_TYPE_RINTC_AFFINITY = 7,	/* ACPI 6.6 */
+	ACPI_SRAT_TYPE_RESERVED = 8	/* 8 and greater are reserved */
 };
 
 /*
@@ -296,6 +297,21 @@ struct acpi_srat_generic_affinity {
 #define ACPI_SRAT_GENERIC_AFFINITY_ENABLED     (1)	/* 00: Use affinity structure */
 #define ACPI_SRAT_ARCHITECTURAL_TRANSACTIONS   (1<<1)	/* ACPI 6.4 */
 
+/* 7: RINTC Affinity (ACPI 6.6) */
+
+struct acpi_srat_rintc_affinity {
+	struct acpi_subtable_header header;
+	u16 reserved;           /* Reserved, must be zero */
+	u32 proximity_domain;
+	u32 acpi_processor_uid;
+	u32 flags;
+	u32 clock_domain;
+};
+
+/* Flags for struct acpi_srat_rintc_affinity */
+
+#define ACPI_SRAT_RINTC_ENABLED     (1)	/* 00: Use affinity structure */
+
 /*******************************************************************************
  *
  * STAO - Status Override Table (_STA override) - ACPI 6.0
-- 
2.34.1

[PATCH v3 2/6] ACPI: RISCV: Add NUMA support based on SRAT and SLIT

[Haibo Xu]

Add acpi_numa.c file to enable parse NUMA information from
ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and
memory nodes to proximity domain mapping, while SLIT table
provide the distance metrics between proximity domains.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
---
 arch/riscv/include/asm/acpi.h |  15 +++-
 arch/riscv/kernel/Makefile    |   1 +
 arch/riscv/kernel/acpi.c      |   5 --
 arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++
 arch/riscv/kernel/setup.c     |   4 +-
 arch/riscv/kernel/smpboot.c   |   2 -
 include/linux/acpi.h          |   6 ++
 7 files changed, 154 insertions(+), 10 deletions(-)
 create mode 100644 arch/riscv/kernel/acpi_numa.c

diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
index 7dad0cf9d701..e0a1f84404f3 100644
--- a/arch/riscv/include/asm/acpi.h
+++ b/arch/riscv/include/asm/acpi.h
@@ -61,11 +61,14 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) { }
 
 void acpi_init_rintc_map(void);
 struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu);
-u32 get_acpi_id_for_cpu(int cpu);
+static inline u32 get_acpi_id_for_cpu(int cpu)
+{
+	return acpi_cpu_get_madt_rintc(cpu)->uid;
+}
+
 int acpi_get_riscv_isa(struct acpi_table_header *table,
 		       unsigned int cpu, const char **isa);
 
-static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
 void acpi_get_cbo_block_size(struct acpi_table_header *table, u32 *cbom_size,
 			     u32 *cboz_size, u32 *cbop_size);
 #else
@@ -87,4 +90,12 @@ static inline void acpi_get_cbo_block_size(struct acpi_table_header *table,
 
 #endif /* CONFIG_ACPI */
 
+#ifdef CONFIG_ACPI_NUMA
+int acpi_numa_get_nid(unsigned int cpu);
+void acpi_map_cpus_to_nodes(void);
+#else
+static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
+static inline void acpi_map_cpus_to_nodes(void) { }
+#endif /* CONFIG_ACPI_NUMA */
+
 #endif /*_ASM_ACPI_H*/
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 81d94a8ee10f..960e627d2ad1 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -109,3 +109,4 @@ obj-$(CONFIG_COMPAT)		+= compat_vdso/
 
 obj-$(CONFIG_64BIT)		+= pi/
 obj-$(CONFIG_ACPI)		+= acpi.o
+obj-$(CONFIG_ACPI_NUMA)	+= acpi_numa.o
diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
index e619edc8b0cc..040bdbfea2b4 100644
--- a/arch/riscv/kernel/acpi.c
+++ b/arch/riscv/kernel/acpi.c
@@ -191,11 +191,6 @@ struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu)
 	return &cpu_madt_rintc[cpu];
 }
 
-u32 get_acpi_id_for_cpu(int cpu)
-{
-	return acpi_cpu_get_madt_rintc(cpu)->uid;
-}
-
 /*
  * __acpi_map_table() will be called before paging_init(), so early_ioremap()
  * or early_memremap() should be called here to for ACPI table mapping.
diff --git a/arch/riscv/kernel/acpi_numa.c b/arch/riscv/kernel/acpi_numa.c
new file mode 100644
index 000000000000..0231482d6946
--- /dev/null
+++ b/arch/riscv/kernel/acpi_numa.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ACPI 6.6 based NUMA setup for RISCV
+ * Lots of code was borrowed from arch/arm64/kernel/acpi_numa.c
+ *
+ * Copyright 2004 Andi Kleen, SuSE Labs.
+ * Copyright (C) 2013-2016, Linaro Ltd.
+ *		Author: Hanjun Guo <hanjun.guo@linaro.org>
+ * Copyright (C) 2024 Intel Corporation.
+ *
+ * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
+ *
+ * Called from acpi_numa_init while reading the SRAT and SLIT tables.
+ * Assumes all memory regions belonging to a single proximity domain
+ * are in one chunk. Holes between them will be included in the node.
+ */
+
+#define pr_fmt(fmt) "ACPI: NUMA: " fmt
+
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/memblock.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+
+#include <asm/numa.h>
+
+static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE };
+
+int __init acpi_numa_get_nid(unsigned int cpu)
+{
+	return acpi_early_node_map[cpu];
+}
+
+static inline int get_cpu_for_acpi_id(u32 uid)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
+		if (uid == get_acpi_id_for_cpu(cpu))
+			return cpu;
+
+	return -EINVAL;
+}
+
+static int __init acpi_parse_rintc_pxm(union acpi_subtable_headers *header,
+				       const unsigned long end)
+{
+	struct acpi_srat_rintc_affinity *pa;
+	int cpu, pxm, node;
+
+	if (srat_disabled())
+		return -EINVAL;
+
+	pa = (struct acpi_srat_rintc_affinity *)header;
+	if (!pa)
+		return -EINVAL;
+
+	if (!(pa->flags & ACPI_SRAT_RINTC_ENABLED))
+		return 0;
+
+	pxm = pa->proximity_domain;
+	node = pxm_to_node(pxm);
+
+	/*
+	 * If we can't map the UID to a logical cpu this
+	 * means that the UID is not part of possible cpus
+	 * so we do not need a NUMA mapping for it, skip
+	 * the SRAT entry and keep parsing.
+	 */
+	cpu = get_cpu_for_acpi_id(pa->acpi_processor_uid);
+	if (cpu < 0)
+		return 0;
+
+	acpi_early_node_map[cpu] = node;
+	pr_info("SRAT: PXM %d -> HARTID 0x%lx -> Node %d\n", pxm,
+		cpuid_to_hartid_map(cpu), node);
+
+	return 0;
+}
+
+void __init acpi_map_cpus_to_nodes(void)
+{
+	int i;
+
+	/*
+	 * In ACPI, SMP and CPU NUMA information is provided in separate
+	 * static tables, namely the MADT and the SRAT.
+	 *
+	 * Thus, it is simpler to first create the cpu logical map through
+	 * an MADT walk and then map the logical cpus to their node ids
+	 * as separate steps.
+	 */
+	acpi_table_parse_entries(ACPI_SIG_SRAT, sizeof(struct acpi_table_srat),
+				 ACPI_SRAT_TYPE_RINTC_AFFINITY, acpi_parse_rintc_pxm, 0);
+
+	for (i = 0; i < nr_cpu_ids; i++)
+		early_map_cpu_to_node(i, acpi_numa_get_nid(i));
+}
+
+/* Callback for Proximity Domain -> logical node ID mapping */
+void __init acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa)
+{
+	int pxm, node;
+
+	if (srat_disabled())
+		return;
+
+	if (pa->header.length < sizeof(struct acpi_srat_rintc_affinity)) {
+		pr_err("SRAT: Invalid SRAT header length: %d\n", pa->header.length);
+		bad_srat();
+		return;
+	}
+
+	if (!(pa->flags & ACPI_SRAT_RINTC_ENABLED))
+		return;
+
+	pxm = pa->proximity_domain;
+	node = acpi_map_pxm_to_node(pxm);
+
+	if (node == NUMA_NO_NODE) {
+		pr_err("SRAT: Too many proximity domains %d\n", pxm);
+		bad_srat();
+		return;
+	}
+
+	node_set(node, numa_nodes_parsed);
+}
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 4f73c0ae44b2..a2cde65b69e9 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -281,8 +281,10 @@ void __init setup_arch(char **cmdline_p)
 	setup_smp();
 #endif
 
-	if (!acpi_disabled)
+	if (!acpi_disabled) {
 		acpi_init_rintc_map();
+		acpi_map_cpus_to_nodes();
+	}
 
 	riscv_init_cbo_blocksizes();
 	riscv_fill_hwcap();
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index d41090fc3203..7b63149128e7 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -96,7 +96,6 @@ static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const un
 	if (hart == cpuid_to_hartid_map(0)) {
 		BUG_ON(found_boot_cpu);
 		found_boot_cpu = true;
-		early_map_cpu_to_node(0, acpi_numa_get_nid(cpu_count));
 		return 0;
 	}
 
@@ -106,7 +105,6 @@ static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const un
 	}
 
 	cpuid_to_hartid_map(cpu_count) = hart;
-	early_map_cpu_to_node(cpu_count, acpi_numa_get_nid(cpu_count));
 	cpu_count++;
 
 	return 0;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 34829f2c517a..bba6d6b35f68 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -269,6 +269,12 @@ acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
 
 int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
 
+#ifdef CONFIG_RISCV
+void acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa);
+#else
+static inline void acpi_numa_rintc_affinity_init(struct acpi_srat_rintc_affinity *pa) { }
+#endif
+
 #ifndef PHYS_CPUID_INVALID
 typedef u32 phys_cpuid_t;
 #define PHYS_CPUID_INVALID (phys_cpuid_t)(-1)
-- 
2.34.1

[PATCH v3 3/6] ACPI: NUMA: Add handler for SRAT RINTC affinity structure

[Haibo Xu]

Add RINTC affinity structure handler during parsing SRAT table.

Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
---
 drivers/acpi/numa/srat.c | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
index e45e64993c50..bc8f34b2ad51 100644
--- a/drivers/acpi/numa/srat.c
+++ b/drivers/acpi/numa/srat.c
@@ -167,6 +167,19 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header)
 		}
 	}
 	break;
+
+	case ACPI_SRAT_TYPE_RINTC_AFFINITY:
+		{
+			struct acpi_srat_rintc_affinity *p =
+			    (struct acpi_srat_rintc_affinity *)header;
+			pr_debug("SRAT Processor (acpi id[0x%04x]) in proximity domain %d %s\n",
+				 p->acpi_processor_uid,
+				 p->proximity_domain,
+				 (p->flags & ACPI_SRAT_RINTC_ENABLED) ?
+				 "enabled" : "disabled");
+		}
+		break;
+
 	default:
 		pr_warn("Found unsupported SRAT entry (type = 0x%x)\n",
 			header->type);
@@ -450,6 +463,21 @@ acpi_parse_gi_affinity(union acpi_subtable_headers *header,
 }
 #endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */
 
+static int __init
+acpi_parse_rintc_affinity(union acpi_subtable_headers *header,
+			  const unsigned long end)
+{
+	struct acpi_srat_rintc_affinity *rintc_affinity;
+
+	rintc_affinity = (struct acpi_srat_rintc_affinity *)header;
+	acpi_table_print_srat_entry(&header->common);
+
+	/* let architecture-dependent part to do it */
+	acpi_numa_rintc_affinity_init(rintc_affinity);
+
+	return 0;
+}
+
 static int __initdata parsed_numa_memblks;
 
 static int __init
@@ -503,7 +531,7 @@ int __init acpi_numa_init(void)
 
 	/* SRAT: System Resource Affinity Table */
 	if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
-		struct acpi_subtable_proc srat_proc[4];
+		struct acpi_subtable_proc srat_proc[5];
 
 		memset(srat_proc, 0, sizeof(srat_proc));
 		srat_proc[0].id = ACPI_SRAT_TYPE_CPU_AFFINITY;
@@ -514,6 +542,8 @@ int __init acpi_numa_init(void)
 		srat_proc[2].handler = acpi_parse_gicc_affinity;
 		srat_proc[3].id = ACPI_SRAT_TYPE_GENERIC_AFFINITY;
 		srat_proc[3].handler = acpi_parse_gi_affinity;
+		srat_proc[4].id = ACPI_SRAT_TYPE_RINTC_AFFINITY;
+		srat_proc[4].handler = acpi_parse_rintc_affinity;
 
 		acpi_table_parse_entries_array(ACPI_SIG_SRAT,
 					sizeof(struct acpi_table_srat),
-- 
2.34.1

[PATCH v3 4/6] ACPI: NUMA: Make some NUMA related parse functions common

[Haibo Xu]

The acpi_numa_slit_init(), acpi_numa_memory_affinity_init()
and acpi_parse_cfmws() functions are common enough to be used
on platforms that support ACPI_NUMA(x86/arm64/loongarch).
Remove the condition to avoid long defined(CONFIG_ARCH) check
when new platform(riscv) support was enabled.

Suggested-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
---
 drivers/acpi/numa/srat.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
index bc8f34b2ad51..860900faa843 100644
--- a/drivers/acpi/numa/srat.c
+++ b/drivers/acpi/numa/srat.c
@@ -221,7 +221,6 @@ int __init srat_disabled(void)
 	return acpi_numa < 0;
 }
 
-#if defined(CONFIG_X86) || defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH)
 /*
  * Callback for SLIT parsing.  pxm_to_node() returns NUMA_NO_NODE for
  * I/O localities since SRAT does not list them.  I/O localities are
@@ -353,13 +352,6 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
 	(*fake_pxm)++;
 	return 0;
 }
-#else
-static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
-				   void *arg, const unsigned long table_end)
-{
-	return 0;
-}
-#endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */
 
 static int __init acpi_parse_slit(struct acpi_table_header *table)
 {
-- 
2.34.1

[PATCH v3 5/6] ACPI: NUMA: change the ACPI_NUMA to a hidden option

[Haibo Xu]

x86/arm64/loongarch would select ACPI_NUMA by default and riscv
would do the same thing, so change it to a hidden option and the
select statements except for the X86_64_ACPI_NUMA can also go away.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
---
 arch/arm64/Kconfig        | 1 -
 arch/loongarch/Kconfig    | 1 -
 drivers/acpi/numa/Kconfig | 5 +----
 3 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 7b11c98b3e84..c6c667898da6 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1439,7 +1439,6 @@ config HOTPLUG_CPU
 config NUMA
 	bool "NUMA Memory Allocation and Scheduler Support"
 	select GENERIC_ARCH_NUMA
-	select ACPI_NUMA if ACPI
 	select OF_NUMA
 	select HAVE_SETUP_PER_CPU_AREA
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index a5f300ec6f28..29d574a5c34c 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -465,7 +465,6 @@ config NR_CPUS
 config NUMA
 	bool "NUMA Support"
 	select SMP
-	select ACPI_NUMA if ACPI
 	help
 	  Say Y to compile the kernel with NUMA (Non-Uniform Memory Access)
 	  support.  This option improves performance on systems with more
diff --git a/drivers/acpi/numa/Kconfig b/drivers/acpi/numa/Kconfig
index 849c2bd820b9..f33194d1e43f 100644
--- a/drivers/acpi/numa/Kconfig
+++ b/drivers/acpi/numa/Kconfig
@@ -1,9 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 config ACPI_NUMA
-	bool "NUMA support"
-	depends on NUMA
-	depends on (X86 || ARM64 || LOONGARCH)
-	default y if ARM64
+	def_bool NUMA && !X86
 
 config ACPI_HMAT
 	bool "ACPI Heterogeneous Memory Attribute Table Support"
-- 
2.34.1

[PATCH v3 6/6] ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init

[Haibo Xu]

There are lots of ACPI enabled systems that aren't NUMA and If the
firmware didn't provide the SRAT/SLIT, then there will be a message
"Failed to initialise from firmware" from arch_acpi_numa_init() which
adding noise to the boot on all of those kind of systems. Replace the
pr_info with pr_debug in arch_acpi_numa_init() to avoid it.

Suggested-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
---
 drivers/base/arch_numa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/arch_numa.c b/drivers/base/arch_numa.c
index 5b59d133b6af..555aee3ee8e7 100644
--- a/drivers/base/arch_numa.c
+++ b/drivers/base/arch_numa.c
@@ -445,7 +445,7 @@ static int __init arch_acpi_numa_init(void)
 
 	ret = acpi_numa_init();
 	if (ret) {
-		pr_info("Failed to initialise from firmware\n");
+		pr_debug("Failed to initialise from firmware\n");
 		return ret;
 	}
 
-- 
2.34.1