* difference of timestamp between babeltrace and python binding
@ 2020-07-22 6:30 Kim, Seongab via lttng-dev
2020-07-22 6:30 ` [lttng-dev] " Kim, Seongab via lttng-dev
2020-07-22 14:56 ` Philippe Proulx via lttng-dev
0 siblings, 2 replies; 6+ messages in thread
From: Kim, Seongab via lttng-dev @ 2020-07-22 6:30 UTC (permalink / raw)
To: lttng-dev
Hi,
I found that the timestamps from babeltrace and python binding are different in nanoseconds level.
skim@d54030999178:~/ssd_work/traces$ python3 test.py ./trace/ | head -n 10
2019-12-12 13:45:40.098212096 (+0.000000 s): syscall_exit_ppoll
2019-12-12 13:45:40.098213608 (+0.000001 s): rcu_utilization
2019-12-12 13:45:40.098214632 (+0.000001 s): syscall_entry_ioctl
2019-12-12 13:45:40.098214888 (+0.000000 s): kmem_kfree
2019-12-12 13:45:40.098214144 (+0.000000 s): rcu_utilization
2019-12-12 13:45:40.098215168 (+0.000001 s): sched_stat_runtime
2019-12-12 13:45:40.098220776 (+0.000004 s): sched_switch
2019-12-12 13:45:40.098221312 (+0.000002 s): timer_hrtimer_cancel
2019-12-12 13:45:40.098221312 (+0.000000 s): kmem_kmalloc
2019-12-12 13:45:40.098223360 (+0.000002 s): kmem_kfree
Traceback (most recent call last):
File "test.py", line 33, in <module>
print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
BrokenPipeError: [Errno 32] Broken pipe
skim@d54030999178:~/ssd_work/traces$ babeltrace2 ./trace/ | head -n 10
[13:45:40.098211969] (+?.?????????) test-sys syscall_exit_ppoll: { cpu_id = 3 }, { ret = 0, nfds = 1, fds_length = 0, overflow = 0, fds =[ ] }
[13:45:40.098212481] (+0.000000512) test-sys rcu_utilization: { cpu_id = 5 }, { s = "Start context switch" }
[13:45:40.098213729] (+0.000001248) test-sys syscall_entry_ioctl: { cpu_id = 2 }, { fd = 24, cmd = 1075331408, arg = 547894601712 }
[13:45:40.098213953] (+0.000000224) test-sys kmem_kfree: { cpu_id = 3 }, { call_site = 0xFFFFFF800153B274, ptr = 0x0 }
[13:45:40.098214017] (+0.000000064) test-sys rcu_utilization: { cpu_id = 5 }, { s = "End context switch" }
[13:45:40.098215201] (+0.000001184) test-sys sched_stat_runtime: { cpu_id = 5 }, { comm = "Positioning", tid = 1056, runtime = 38048, vruntime = 2125241692 }
[13:45:40.098219681] (+0.000004480) test-sys sched_switch: { cpu_id = 5 }, { prev_comm = "Positioning", prev_tid = 1056, prev_prio = 15, prev_state = 1, next_comm = "Sensor", next_tid = 1061, next_prio = 15 }
[13:45:40.098221313] (+0.000001632) test-sys timer_hrtimer_cancel: { cpu_id = 5 }, { hrtimer = 0xFFFFFFC257807CD8 }
[13:45:40.098221409] (+0.000000096) test-sys kmem_kmalloc: { cpu_id = 0 }, { call_site = 0xFFFFFF80014A27EC, ptr = 0xFFFFFFC04EDFA400, bytes_req = 739, bytes_alloc = 1024, gfp_flags = 37748928 }
[13:45:40.098223361] (+0.000001952) test-sys kmem_kfree: { cpu_id = 5 }, { call_site = 0xFFFFFF8008164C58, ptr = 0x0 }
The difference is not consistent and Trace Compass shows the same timestamp with the babeltrace output, so I think something is wrong in my python code.
I just modified the example script from https://babeltrace.org/docs/v2.0/python/bt2/examples.html#get-an-event-s-time to show nanoseconds as below.
diff:
32,33c32,33
< fmt = '{} (+{:.6f} s): {}'
< print(fmt.format(dt, diff_s, msg.event.name))
---
> fmt = '{}{:03.0f} (+{:.6f} s): {}'
> print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
Full code:
import bt2
import sys
import datetime
# Create a trace collection message iterator from the first command-line
# argument.
msg_it = bt2.TraceCollectionMessageIterator(sys.argv[1])
# Last event's time (ns from origin).
last_event_ns_from_origin = None
# Iterate the trace messages.
for msg in msg_it:
# `bt2._EventMessageConst` is the Python type of an event message.
if type(msg) is bt2._EventMessageConst:
# Get event message's default clock snapshot's ns from origin
# value.
ns_from_origin = msg.default_clock_snapshot.ns_from_origin
# Compute the time difference since the last event message.
diff_s = 0
if last_event_ns_from_origin is not None:
diff_s = (ns_from_origin - last_event_ns_from_origin) / 1e9
# Create a `datetime.datetime` object from `ns_from_origin` for
# presentation. Note that such an object is less accurate than
# `ns_from_origin` as it holds microseconds, not nanoseconds.
dt = datetime.datetime.fromtimestamp(ns_from_origin / 1e9)
# Print line.
fmt = '{}{:03.0f} (+{:.6f} s): {}'
print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
# Update last event's time.
last_event_ns_from_origin = ns_from_origin
Could someone help what was wrong in the python code? Or is this a bug in ns_from_origin implementation?
I'm using below version.
skim@d54030999178:~/work/tmp$ babeltrace2 -V
Babeltrace 2.0.4 "Amqui"
Amqui (/_mkwi_/) is a town in eastern Qu_bec, Canada, at the base of the Gasp_ peninsula in Bas-Saint-Laurent. Located at the confluence
of the Humqui and Matap_dia Rivers, its proximity to woodlands makes it a great destination for outdoor activities such as camping, hiking,
and mountain biking.
skim@d54030999178:~/work/tmp$ apt list python3-bt2
Listing... Done
python3-bt2/bionic,now 2.0.x+stable+git4134+202007172102~ubuntu18.04.1 amd64 [installed]
Best regards,
Seongab Kim
^ permalink raw reply [flat|nested] 6+ messages in thread
* [lttng-dev] difference of timestamp between babeltrace and python binding
2020-07-22 6:30 difference of timestamp between babeltrace and python binding Kim, Seongab via lttng-dev
@ 2020-07-22 6:30 ` Kim, Seongab via lttng-dev
2020-07-22 14:56 ` Philippe Proulx via lttng-dev
1 sibling, 0 replies; 6+ messages in thread
From: Kim, Seongab via lttng-dev @ 2020-07-22 6:30 UTC (permalink / raw)
To: lttng-dev
Hi,
I found that the timestamps from babeltrace and python binding are different in nanoseconds level.
skim@d54030999178:~/ssd_work/traces$ python3 test.py ./trace/ | head -n 10
2019-12-12 13:45:40.098212096 (+0.000000 s): syscall_exit_ppoll
2019-12-12 13:45:40.098213608 (+0.000001 s): rcu_utilization
2019-12-12 13:45:40.098214632 (+0.000001 s): syscall_entry_ioctl
2019-12-12 13:45:40.098214888 (+0.000000 s): kmem_kfree
2019-12-12 13:45:40.098214144 (+0.000000 s): rcu_utilization
2019-12-12 13:45:40.098215168 (+0.000001 s): sched_stat_runtime
2019-12-12 13:45:40.098220776 (+0.000004 s): sched_switch
2019-12-12 13:45:40.098221312 (+0.000002 s): timer_hrtimer_cancel
2019-12-12 13:45:40.098221312 (+0.000000 s): kmem_kmalloc
2019-12-12 13:45:40.098223360 (+0.000002 s): kmem_kfree
Traceback (most recent call last):
File "test.py", line 33, in <module>
print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
BrokenPipeError: [Errno 32] Broken pipe
skim@d54030999178:~/ssd_work/traces$ babeltrace2 ./trace/ | head -n 10
[13:45:40.098211969] (+?.?????????) test-sys syscall_exit_ppoll: { cpu_id = 3 }, { ret = 0, nfds = 1, fds_length = 0, overflow = 0, fds =[ ] }
[13:45:40.098212481] (+0.000000512) test-sys rcu_utilization: { cpu_id = 5 }, { s = "Start context switch" }
[13:45:40.098213729] (+0.000001248) test-sys syscall_entry_ioctl: { cpu_id = 2 }, { fd = 24, cmd = 1075331408, arg = 547894601712 }
[13:45:40.098213953] (+0.000000224) test-sys kmem_kfree: { cpu_id = 3 }, { call_site = 0xFFFFFF800153B274, ptr = 0x0 }
[13:45:40.098214017] (+0.000000064) test-sys rcu_utilization: { cpu_id = 5 }, { s = "End context switch" }
[13:45:40.098215201] (+0.000001184) test-sys sched_stat_runtime: { cpu_id = 5 }, { comm = "Positioning", tid = 1056, runtime = 38048, vruntime = 2125241692 }
[13:45:40.098219681] (+0.000004480) test-sys sched_switch: { cpu_id = 5 }, { prev_comm = "Positioning", prev_tid = 1056, prev_prio = 15, prev_state = 1, next_comm = "Sensor", next_tid = 1061, next_prio = 15 }
[13:45:40.098221313] (+0.000001632) test-sys timer_hrtimer_cancel: { cpu_id = 5 }, { hrtimer = 0xFFFFFFC257807CD8 }
[13:45:40.098221409] (+0.000000096) test-sys kmem_kmalloc: { cpu_id = 0 }, { call_site = 0xFFFFFF80014A27EC, ptr = 0xFFFFFFC04EDFA400, bytes_req = 739, bytes_alloc = 1024, gfp_flags = 37748928 }
[13:45:40.098223361] (+0.000001952) test-sys kmem_kfree: { cpu_id = 5 }, { call_site = 0xFFFFFF8008164C58, ptr = 0x0 }
The difference is not consistent and Trace Compass shows the same timestamp with the babeltrace output, so I think something is wrong in my python code.
I just modified the example script from https://babeltrace.org/docs/v2.0/python/bt2/examples.html#get-an-event-s-time to show nanoseconds as below.
diff:
32,33c32,33
< fmt = '{} (+{:.6f} s): {}'
< print(fmt.format(dt, diff_s, msg.event.name))
---
> fmt = '{}{:03.0f} (+{:.6f} s): {}'
> print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
Full code:
import bt2
import sys
import datetime
# Create a trace collection message iterator from the first command-line
# argument.
msg_it = bt2.TraceCollectionMessageIterator(sys.argv[1])
# Last event's time (ns from origin).
last_event_ns_from_origin = None
# Iterate the trace messages.
for msg in msg_it:
# `bt2._EventMessageConst` is the Python type of an event message.
if type(msg) is bt2._EventMessageConst:
# Get event message's default clock snapshot's ns from origin
# value.
ns_from_origin = msg.default_clock_snapshot.ns_from_origin
# Compute the time difference since the last event message.
diff_s = 0
if last_event_ns_from_origin is not None:
diff_s = (ns_from_origin - last_event_ns_from_origin) / 1e9
# Create a `datetime.datetime` object from `ns_from_origin` for
# presentation. Note that such an object is less accurate than
# `ns_from_origin` as it holds microseconds, not nanoseconds.
dt = datetime.datetime.fromtimestamp(ns_from_origin / 1e9)
# Print line.
fmt = '{}{:03.0f} (+{:.6f} s): {}'
print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
# Update last event's time.
last_event_ns_from_origin = ns_from_origin
Could someone help what was wrong in the python code? Or is this a bug in ns_from_origin implementation?
I'm using below version.
skim@d54030999178:~/work/tmp$ babeltrace2 -V
Babeltrace 2.0.4 "Amqui"
Amqui (/_mkwi_/) is a town in eastern Qu_bec, Canada, at the base of the Gasp_ peninsula in Bas-Saint-Laurent. Located at the confluence
of the Humqui and Matap_dia Rivers, its proximity to woodlands makes it a great destination for outdoor activities such as camping, hiking,
and mountain biking.
skim@d54030999178:~/work/tmp$ apt list python3-bt2
Listing... Done
python3-bt2/bionic,now 2.0.x+stable+git4134+202007172102~ubuntu18.04.1 amd64 [installed]
Best regards,
Seongab Kim
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: difference of timestamp between babeltrace and python binding
2020-07-22 6:30 difference of timestamp between babeltrace and python binding Kim, Seongab via lttng-dev
2020-07-22 6:30 ` [lttng-dev] " Kim, Seongab via lttng-dev
@ 2020-07-22 14:56 ` Philippe Proulx via lttng-dev
2020-07-22 14:56 ` [lttng-dev] " Philippe Proulx via lttng-dev
2020-07-23 5:43 ` [EXTERNAL] " Kim, Seongab via lttng-dev
1 sibling, 2 replies; 6+ messages in thread
From: Philippe Proulx via lttng-dev @ 2020-07-22 14:56 UTC (permalink / raw)
To: Kim, Seongab; +Cc: lttng-dev
On Wed, Jul 22, 2020 at 9:17 AM Kim, Seongab via lttng-dev
<lttng-dev@lists.lttng.org> wrote:
>
> Hi,
Hello.
See my comments below.
>
> I found that the timestamps from babeltrace and python binding are different in nanoseconds level.
>
> skim@d54030999178:~/ssd_work/traces$ python3 test.py ./trace/ | head -n 10
> 2019-12-12 13:45:40.098212096 (+0.000000 s): syscall_exit_ppoll
> 2019-12-12 13:45:40.098213608 (+0.000001 s): rcu_utilization
> 2019-12-12 13:45:40.098214632 (+0.000001 s): syscall_entry_ioctl
> 2019-12-12 13:45:40.098214888 (+0.000000 s): kmem_kfree
> 2019-12-12 13:45:40.098214144 (+0.000000 s): rcu_utilization
> 2019-12-12 13:45:40.098215168 (+0.000001 s): sched_stat_runtime
> 2019-12-12 13:45:40.098220776 (+0.000004 s): sched_switch
> 2019-12-12 13:45:40.098221312 (+0.000002 s): timer_hrtimer_cancel
> 2019-12-12 13:45:40.098221312 (+0.000000 s): kmem_kmalloc
> 2019-12-12 13:45:40.098223360 (+0.000002 s): kmem_kfree
> Traceback (most recent call last):
> File "test.py", line 33, in <module>
> print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
> BrokenPipeError: [Errno 32] Broken pipe
> skim@d54030999178:~/ssd_work/traces$ babeltrace2 ./trace/ | head -n 10
> [13:45:40.098211969] (+?.?????????) test-sys syscall_exit_ppoll: { cpu_id = 3 }, { ret = 0, nfds = 1, fds_length = 0, overflow = 0, fds =[ ] }
> [13:45:40.098212481] (+0.000000512) test-sys rcu_utilization: { cpu_id = 5 }, { s = "Start context switch" }
> [13:45:40.098213729] (+0.000001248) test-sys syscall_entry_ioctl: { cpu_id = 2 }, { fd = 24, cmd = 1075331408, arg = 547894601712 }
> [13:45:40.098213953] (+0.000000224) test-sys kmem_kfree: { cpu_id = 3 }, { call_site = 0xFFFFFF800153B274, ptr = 0x0 }
> [13:45:40.098214017] (+0.000000064) test-sys rcu_utilization: { cpu_id = 5 }, { s = "End context switch" }
> [13:45:40.098215201] (+0.000001184) test-sys sched_stat_runtime: { cpu_id = 5 }, { comm = "Positioning", tid = 1056, runtime = 38048, vruntime = 2125241692 }
> [13:45:40.098219681] (+0.000004480) test-sys sched_switch: { cpu_id = 5 }, { prev_comm = "Positioning", prev_tid = 1056, prev_prio = 15, prev_state = 1, next_comm = "Sensor", next_tid = 1061, next_prio = 15 }
> [13:45:40.098221313] (+0.000001632) test-sys timer_hrtimer_cancel: { cpu_id = 5 }, { hrtimer = 0xFFFFFFC257807CD8 }
> [13:45:40.098221409] (+0.000000096) test-sys kmem_kmalloc: { cpu_id = 0 }, { call_site = 0xFFFFFF80014A27EC, ptr = 0xFFFFFFC04EDFA400, bytes_req = 739, bytes_alloc = 1024, gfp_flags = 37748928 }
> [13:45:40.098223361] (+0.000001952) test-sys kmem_kfree: { cpu_id = 5 }, { call_site = 0xFFFFFF8008164C58, ptr = 0x0 }
>
> The difference is not consistent and Trace Compass shows the same timestamp with the babeltrace output, so I think something is wrong in my python code.
> I just modified the example script from https://babeltrace.org/docs/v2.0/python/bt2/examples.html#get-an-event-s-time to show nanoseconds as below.
>
> diff:
>
> 32,33c32,33
> < fmt = '{} (+{:.6f} s): {}'
> < print(fmt.format(dt, diff_s, msg.event.name))
> ---
> > fmt = '{}{:03.0f} (+{:.6f} s): {}'
> > print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
>
> Full code:
>
> import bt2
> import sys
> import datetime
>
> # Create a trace collection message iterator from the first command-line
> # argument.
> msg_it = bt2.TraceCollectionMessageIterator(sys.argv[1])
>
> # Last event's time (ns from origin).
> last_event_ns_from_origin = None
>
> # Iterate the trace messages.
> for msg in msg_it:
> # `bt2._EventMessageConst` is the Python type of an event message.
> if type(msg) is bt2._EventMessageConst:
> # Get event message's default clock snapshot's ns from origin
> # value.
> ns_from_origin = msg.default_clock_snapshot.ns_from_origin
>
> # Compute the time difference since the last event message.
> diff_s = 0
>
> if last_event_ns_from_origin is not None:
> diff_s = (ns_from_origin - last_event_ns_from_origin) / 1e9
>
> # Create a `datetime.datetime` object from `ns_from_origin` for
> # presentation. Note that such an object is less accurate than
> # `ns_from_origin` as it holds microseconds, not nanoseconds.
> dt = datetime.datetime.fromtimestamp(ns_from_origin / 1e9)
This rounds the µs part.
With 1509556783964792907, the µs part becomes 964793.
That's one issue.
>
> # Print line.
> fmt = '{}{:03.0f} (+{:.6f} s): {}'
> print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
`type(1e3)` is `float`.
You get an inaccurate floating point division operation here instead of
an integral one.
Do:
ns_from_origin % 1000
or
ns_from_origin % int(1e3)
instead.
Hope this helps,
Phil
>
> # Update last event's time.
> last_event_ns_from_origin = ns_from_origin
>
> Could someone help what was wrong in the python code? Or is this a bug in ns_from_origin implementation?
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lttng-dev] difference of timestamp between babeltrace and python binding
2020-07-22 14:56 ` Philippe Proulx via lttng-dev
@ 2020-07-22 14:56 ` Philippe Proulx via lttng-dev
2020-07-23 5:43 ` [EXTERNAL] " Kim, Seongab via lttng-dev
1 sibling, 0 replies; 6+ messages in thread
From: Philippe Proulx via lttng-dev @ 2020-07-22 14:56 UTC (permalink / raw)
To: Kim, Seongab; +Cc: lttng-dev
On Wed, Jul 22, 2020 at 9:17 AM Kim, Seongab via lttng-dev
<lttng-dev@lists.lttng.org> wrote:
>
> Hi,
Hello.
See my comments below.
>
> I found that the timestamps from babeltrace and python binding are different in nanoseconds level.
>
> skim@d54030999178:~/ssd_work/traces$ python3 test.py ./trace/ | head -n 10
> 2019-12-12 13:45:40.098212096 (+0.000000 s): syscall_exit_ppoll
> 2019-12-12 13:45:40.098213608 (+0.000001 s): rcu_utilization
> 2019-12-12 13:45:40.098214632 (+0.000001 s): syscall_entry_ioctl
> 2019-12-12 13:45:40.098214888 (+0.000000 s): kmem_kfree
> 2019-12-12 13:45:40.098214144 (+0.000000 s): rcu_utilization
> 2019-12-12 13:45:40.098215168 (+0.000001 s): sched_stat_runtime
> 2019-12-12 13:45:40.098220776 (+0.000004 s): sched_switch
> 2019-12-12 13:45:40.098221312 (+0.000002 s): timer_hrtimer_cancel
> 2019-12-12 13:45:40.098221312 (+0.000000 s): kmem_kmalloc
> 2019-12-12 13:45:40.098223360 (+0.000002 s): kmem_kfree
> Traceback (most recent call last):
> File "test.py", line 33, in <module>
> print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
> BrokenPipeError: [Errno 32] Broken pipe
> skim@d54030999178:~/ssd_work/traces$ babeltrace2 ./trace/ | head -n 10
> [13:45:40.098211969] (+?.?????????) test-sys syscall_exit_ppoll: { cpu_id = 3 }, { ret = 0, nfds = 1, fds_length = 0, overflow = 0, fds =[ ] }
> [13:45:40.098212481] (+0.000000512) test-sys rcu_utilization: { cpu_id = 5 }, { s = "Start context switch" }
> [13:45:40.098213729] (+0.000001248) test-sys syscall_entry_ioctl: { cpu_id = 2 }, { fd = 24, cmd = 1075331408, arg = 547894601712 }
> [13:45:40.098213953] (+0.000000224) test-sys kmem_kfree: { cpu_id = 3 }, { call_site = 0xFFFFFF800153B274, ptr = 0x0 }
> [13:45:40.098214017] (+0.000000064) test-sys rcu_utilization: { cpu_id = 5 }, { s = "End context switch" }
> [13:45:40.098215201] (+0.000001184) test-sys sched_stat_runtime: { cpu_id = 5 }, { comm = "Positioning", tid = 1056, runtime = 38048, vruntime = 2125241692 }
> [13:45:40.098219681] (+0.000004480) test-sys sched_switch: { cpu_id = 5 }, { prev_comm = "Positioning", prev_tid = 1056, prev_prio = 15, prev_state = 1, next_comm = "Sensor", next_tid = 1061, next_prio = 15 }
> [13:45:40.098221313] (+0.000001632) test-sys timer_hrtimer_cancel: { cpu_id = 5 }, { hrtimer = 0xFFFFFFC257807CD8 }
> [13:45:40.098221409] (+0.000000096) test-sys kmem_kmalloc: { cpu_id = 0 }, { call_site = 0xFFFFFF80014A27EC, ptr = 0xFFFFFFC04EDFA400, bytes_req = 739, bytes_alloc = 1024, gfp_flags = 37748928 }
> [13:45:40.098223361] (+0.000001952) test-sys kmem_kfree: { cpu_id = 5 }, { call_site = 0xFFFFFF8008164C58, ptr = 0x0 }
>
> The difference is not consistent and Trace Compass shows the same timestamp with the babeltrace output, so I think something is wrong in my python code.
> I just modified the example script from https://babeltrace.org/docs/v2.0/python/bt2/examples.html#get-an-event-s-time to show nanoseconds as below.
>
> diff:
>
> 32,33c32,33
> < fmt = '{} (+{:.6f} s): {}'
> < print(fmt.format(dt, diff_s, msg.event.name))
> ---
> > fmt = '{}{:03.0f} (+{:.6f} s): {}'
> > print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
>
> Full code:
>
> import bt2
> import sys
> import datetime
>
> # Create a trace collection message iterator from the first command-line
> # argument.
> msg_it = bt2.TraceCollectionMessageIterator(sys.argv[1])
>
> # Last event's time (ns from origin).
> last_event_ns_from_origin = None
>
> # Iterate the trace messages.
> for msg in msg_it:
> # `bt2._EventMessageConst` is the Python type of an event message.
> if type(msg) is bt2._EventMessageConst:
> # Get event message's default clock snapshot's ns from origin
> # value.
> ns_from_origin = msg.default_clock_snapshot.ns_from_origin
>
> # Compute the time difference since the last event message.
> diff_s = 0
>
> if last_event_ns_from_origin is not None:
> diff_s = (ns_from_origin - last_event_ns_from_origin) / 1e9
>
> # Create a `datetime.datetime` object from `ns_from_origin` for
> # presentation. Note that such an object is less accurate than
> # `ns_from_origin` as it holds microseconds, not nanoseconds.
> dt = datetime.datetime.fromtimestamp(ns_from_origin / 1e9)
This rounds the µs part.
With 1509556783964792907, the µs part becomes 964793.
That's one issue.
>
> # Print line.
> fmt = '{}{:03.0f} (+{:.6f} s): {}'
> print(fmt.format(dt, ns_from_origin % 1e3, diff_s, msg.event.name))
`type(1e3)` is `float`.
You get an inaccurate floating point division operation here instead of
an integral one.
Do:
ns_from_origin % 1000
or
ns_from_origin % int(1e3)
instead.
Hope this helps,
Phil
>
> # Update last event's time.
> last_event_ns_from_origin = ns_from_origin
>
> Could someone help what was wrong in the python code? Or is this a bug in ns_from_origin implementation?
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [EXTERNAL] Re: difference of timestamp between babeltrace and python binding
2020-07-22 14:56 ` Philippe Proulx via lttng-dev
2020-07-22 14:56 ` [lttng-dev] " Philippe Proulx via lttng-dev
@ 2020-07-23 5:43 ` Kim, Seongab via lttng-dev
2020-07-23 5:43 ` [lttng-dev] " Kim, Seongab via lttng-dev
1 sibling, 1 reply; 6+ messages in thread
From: Kim, Seongab via lttng-dev @ 2020-07-23 5:43 UTC (permalink / raw)
To: Philippe Proulx; +Cc: lttng-dev
> -----Original Message-----
> From: Philippe Proulx <eeppeliteloop@gmail.com>
> Sent: Wednesday, July 22, 2020 4:57 PM
> To: Kim, Seongab <Seongab.Kim@harman.com>
> Cc: lttng-dev@lists.lttng.org
> Subject: [EXTERNAL] Re: [lttng-dev] difference of timestamp between
> babeltrace and python binding
>
> `type(1e3)` is `float`.
>
> You get an inaccurate floating point division operation here instead of an
> integral one.
>
> Do:
>
> ns_from_origin % 1000
>
> or
>
> ns_from_origin % int(1e3)
>
> instead.
>
> Hope this helps,
>
> Phil
>
Hi Phil,
Thanks. With the change, it works as expected.
Best regards,
Seongab
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lttng-dev] [EXTERNAL] Re: difference of timestamp between babeltrace and python binding
2020-07-23 5:43 ` [EXTERNAL] " Kim, Seongab via lttng-dev
@ 2020-07-23 5:43 ` Kim, Seongab via lttng-dev
0 siblings, 0 replies; 6+ messages in thread
From: Kim, Seongab via lttng-dev @ 2020-07-23 5:43 UTC (permalink / raw)
To: Philippe Proulx; +Cc: lttng-dev
> -----Original Message-----
> From: Philippe Proulx <eeppeliteloop@gmail.com>
> Sent: Wednesday, July 22, 2020 4:57 PM
> To: Kim, Seongab <Seongab.Kim@harman.com>
> Cc: lttng-dev@lists.lttng.org
> Subject: [EXTERNAL] Re: [lttng-dev] difference of timestamp between
> babeltrace and python binding
>
> `type(1e3)` is `float`.
>
> You get an inaccurate floating point division operation here instead of an
> integral one.
>
> Do:
>
> ns_from_origin % 1000
>
> or
>
> ns_from_origin % int(1e3)
>
> instead.
>
> Hope this helps,
>
> Phil
>
Hi Phil,
Thanks. With the change, it works as expected.
Best regards,
Seongab
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-23 5:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-22 6:30 difference of timestamp between babeltrace and python binding Kim, Seongab via lttng-dev
2020-07-22 6:30 ` [lttng-dev] " Kim, Seongab via lttng-dev
2020-07-22 14:56 ` Philippe Proulx via lttng-dev
2020-07-22 14:56 ` [lttng-dev] " Philippe Proulx via lttng-dev
2020-07-23 5:43 ` [EXTERNAL] " Kim, Seongab via lttng-dev
2020-07-23 5:43 ` [lttng-dev] " Kim, Seongab via lttng-dev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).