mptcp.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: menglong8.dong@gmail.com
To: pabeni@redhat.com
Cc: mptcp@lists.linux.dev, Menglong Dong <imagedong@tencent.com>,
	Jiang Biao <benbjiang@tencent.com>,
	Mengen Sun <mengensun@tencent.com>
Subject: [PATCH net v5 2/2] net: mptcp: fix unreleased socket in accept queue
Date: Sun, 11 Sep 2022 12:14:18 +0800	[thread overview]
Message-ID: <20220911041418.818201-3-imagedong@tencent.com> (raw)
In-Reply-To: <20220911041418.818201-1-imagedong@tencent.com>

From: Menglong Dong <imagedong@tencent.com>

The mptcp socket and its subflow sockets in accept queue can't be
released after the process exit.

While the release of a mptcp socket in listening state, the
corresponding tcp socket will be released too. Meanwhile, the tcp
socket in the unaccept queue will be released too. However, only init
subflow is in the unaccept queue, and the joined subflow is not in the
unaccept queue, which makes the joined subflow won't be released, and
therefore the corresponding unaccepted mptcp socket will not be released
to.

This can be reproduced easily with following steps:

1. create 2 namespace and veth:
   $ ip netns add mptcp-client
   $ ip netns add mptcp-server
   $ sysctl -w net.ipv4.conf.all.rp_filter=0
   $ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
   $ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
   $ ip link add red-client netns mptcp-client type veth peer red-server \
     netns mptcp-server
   $ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
   $ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
   $ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
   $ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
   $ ip -n mptcp-server link set red-server up
   $ ip -n mptcp-client link set red-client up

2. configure the endpoint and limit for client and server:
   $ ip -n mptcp-server mptcp endpoint flush
   $ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
   $ ip -n mptcp-client mptcp endpoint flush
   $ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
   $ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
     1 subflow

3. listen and accept on a port, such as 9999. The nc command we used
   here is modified, which makes it use mptcp protocol by default.
   $ ip netns exec mptcp-server nc -l -k -p 9999

4. open another *two* terminal and use each of them to connect to the
   server with the following command:
   $ ip netns exec mptcp-client nc 10.0.0.1 9999
   Input something after connect to triger the connection of the second
   subflow. So that there are two established mptcp connections, with the
   second one still unaccepted.

5. exit all the nc command, and check the tcp socket in server namespace.
   And you will find that there is one tcp socket in CLOSE_WAIT state
   and can't release forever.

Fix this by closing all of the unaccepted mptcp socket in
mptcp_subflow_queue_clean() with __mptcp_close().

Now, we can ensure that all unaccepted mptcp sockets will be cleaned by
__mptcp_close() before they are released, so mptcp_sock_destruct(), which
is used to clean the unaccepted mptcp socket, is not needed anymore.

The selftests for mptcp is ran for this commit, and no new failures.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
---
v5:
- don't make mptcp_cancel_work() inline

v4:
- factor-out __mptcp_close() and use it in this commit.

v3:
- remove mptcp_close_nolock() and call mptcp_close() directly in
  mptcp_subflow_queue_clean(), as mptcp_close_nolock() will cause
  dead lock.

v2:
- remove mptcp_sock_destruct()
- introduce mptcp_close_nolock() and replace mptcp_close() with it in
  mptcp_subflow_queue_clean()
---
 net/mptcp/protocol.c |  2 +-
 net/mptcp/protocol.h |  1 +
 net/mptcp/subflow.c  | 33 +++++++--------------------------
 3 files changed, 9 insertions(+), 27 deletions(-)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 06bb43455c62..45ed50e9aec9 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -2656,7 +2656,7 @@ static void __mptcp_clear_xmit(struct sock *sk)
 		dfrag_clear(sk, dfrag);
 }
 
-static void mptcp_cancel_work(struct sock *sk)
+void mptcp_cancel_work(struct sock *sk)
 {
 	struct mptcp_sock *msk = mptcp_sk(sk);
 
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 8f123d450c76..8f372b8f059c 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -613,6 +613,7 @@ void mptcp_subflow_queue_clean(struct sock *ssk);
 void mptcp_sock_graft(struct sock *sk, struct socket *parent);
 struct socket *__mptcp_nmpc_socket(const struct mptcp_sock *msk);
 bool __mptcp_close(struct sock *sk, long timeout);
+void mptcp_cancel_work(struct sock *sk);
 
 bool mptcp_addresses_equal(const struct mptcp_addr_info *a,
 			   const struct mptcp_addr_info *b, bool use_port);
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index c7d49fb6e7bd..07dd23d0fe04 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -602,30 +602,6 @@ static bool subflow_hmac_valid(const struct request_sock *req,
 	return !crypto_memneq(hmac, mp_opt->hmac, MPTCPOPT_HMAC_LEN);
 }
 
-static void mptcp_sock_destruct(struct sock *sk)
-{
-	/* if new mptcp socket isn't accepted, it is free'd
-	 * from the tcp listener sockets request queue, linked
-	 * from req->sk.  The tcp socket is released.
-	 * This calls the ULP release function which will
-	 * also remove the mptcp socket, via
-	 * sock_put(ctx->conn).
-	 *
-	 * Problem is that the mptcp socket will be in
-	 * ESTABLISHED state and will not have the SOCK_DEAD flag.
-	 * Both result in warnings from inet_sock_destruct.
-	 */
-	if ((1 << sk->sk_state) & (TCPF_ESTABLISHED | TCPF_CLOSE_WAIT)) {
-		sk->sk_state = TCP_CLOSE;
-		WARN_ON_ONCE(sk->sk_socket);
-		sock_orphan(sk);
-	}
-
-	/* We don't need to clear msk->subflow, as it's still NULL at this point */
-	mptcp_destroy_common(mptcp_sk(sk), 0);
-	inet_sock_destruct(sk);
-}
-
 static void mptcp_force_close(struct sock *sk)
 {
 	/* the msk is not yet exposed to user-space */
@@ -768,7 +744,6 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 			/* new mpc subflow takes ownership of the newly
 			 * created mptcp socket
 			 */
-			new_msk->sk_destruct = mptcp_sock_destruct;
 			mptcp_sk(new_msk)->setsockopt_seq = ctx->setsockopt_seq;
 			mptcp_pm_new_connection(mptcp_sk(new_msk), child, 1);
 			mptcp_token_accept(subflow_req, mptcp_sk(new_msk));
@@ -1763,13 +1738,19 @@ void mptcp_subflow_queue_clean(struct sock *listener_ssk)
 
 	for (msk = head; msk; msk = next) {
 		struct sock *sk = (struct sock *)msk;
-		bool slow;
+		bool slow, do_cancel_work;
 
+		sock_hold(sk);
 		slow = lock_sock_fast_nested(sk);
 		next = msk->dl_next;
 		msk->first = NULL;
 		msk->dl_next = NULL;
+
+		do_cancel_work = __mptcp_close(sk, 0);
 		unlock_sock_fast(sk, slow);
+		if (do_cancel_work)
+			mptcp_cancel_work(sk);
+		sock_put(sk);
 	}
 
 	/* we are still under the listener msk socket lock */
-- 
2.37.2


  parent reply	other threads:[~2022-09-11  4:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-11  4:14 [PATCH net v5 0/2] net: mptcp: fix unreleased socket in accept queue menglong8.dong
2022-09-11  4:14 ` [PATCH net v5 1/2] net: mptcp: factor out __mptcp_close() without socket lock menglong8.dong
2022-09-11  4:14 ` menglong8.dong [this message]
2022-09-19 14:17 ` [PATCH net v5 0/2] net: mptcp: fix unreleased socket in accept queue Paolo Abeni
2022-09-19 15:14 ` Matthieu Baerts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220911041418.818201-3-imagedong@tencent.com \
    --to=menglong8.dong@gmail.com \
    --cc=benbjiang@tencent.com \
    --cc=imagedong@tencent.com \
    --cc=mengensun@tencent.com \
    --cc=mptcp@lists.linux.dev \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).