* [PATCH 05/29] pcmcia: re-work pcmcia_request_irq()
[not found] <20100519064149.GA5755@comet.dominikbrodowski.net>
@ 2010-05-19 6:42 ` Dominik Brodowski
2010-05-19 6:42 ` [PATCH 07/29] pcmcia: dev_node removal (write-only drivers) Dominik Brodowski
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: Dominik Brodowski @ 2010-05-19 6:42 UTC (permalink / raw)
To: linux-pcmcia
Cc: alsa-devel, linux-ide, netdev, linux-usb, linux-wireless,
Dominik Brodowski, linux-bluetooth, linux-serial
Instead of the old pcmcia_request_irq() interface, drivers may now
choose between:
- calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.
- use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
clean up automatically on calls to pcmcia_disable_device() or
device ejection.
- drivers still not capable of IRQF_SHARED (or not telling us so) may
use the deprecated pcmcia_request_exclusive_irq() for the time
being; they might receive a shared IRQ nonetheless.
CC: linux-bluetooth@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-usb@vger.kernel.org
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
Documentation/pcmcia/driver-changes.txt | 10 ++
drivers/ata/pata_pcmcia.c | 6 +-
drivers/bluetooth/bluecard_cs.c | 7 +-
drivers/bluetooth/bt3c_cs.c | 7 +-
drivers/bluetooth/btuart_cs.c | 7 +-
drivers/bluetooth/dtl1_cs.c | 7 +-
drivers/char/pcmcia/ipwireless/main.c | 11 +--
drivers/char/pcmcia/synclink_cs.c | 12 +--
drivers/ide/ide-cs.c | 8 +-
drivers/isdn/hardware/avm/avm_cs.c | 17 +--
drivers/isdn/hisax/avma1_cs.c | 12 +--
drivers/isdn/hisax/elsa_cs.c | 13 +--
drivers/isdn/hisax/sedlbauer_cs.c | 23 +---
drivers/isdn/hisax/teles_cs.c | 13 +--
drivers/net/pcmcia/3c574_cs.c | 6 +-
drivers/net/pcmcia/3c589_cs.c | 7 +-
drivers/net/pcmcia/axnet_cs.c | 13 +--
drivers/net/pcmcia/com20020_cs.c | 8 +-
drivers/net/pcmcia/fmvj18x_cs.c | 10 +--
drivers/net/pcmcia/ibmtr_cs.c | 8 +-
drivers/net/pcmcia/nmclan_cs.c | 6 +-
drivers/net/pcmcia/pcnet_cs.c | 8 +-
drivers/net/pcmcia/smc91c92_cs.c | 8 +-
drivers/net/pcmcia/xirc2ps_cs.c | 7 +-
drivers/net/wireless/airo_cs.c | 25 +---
drivers/net/wireless/atmel_cs.c | 28 +----
drivers/net/wireless/b43/pcmcia.c | 5 +-
drivers/net/wireless/hostap/hostap_cs.c | 29 +----
drivers/net/wireless/libertas/if_cs.c | 21 +---
drivers/net/wireless/orinoco/orinoco_cs.c | 13 +--
drivers/net/wireless/orinoco/spectrum_cs.c | 13 +--
drivers/net/wireless/ray_cs.c | 8 +-
drivers/net/wireless/wl3501_cs.c | 8 +-
drivers/parport/parport_cs.c | 8 +-
drivers/pcmcia/ds.c | 3 +-
drivers/pcmcia/pcmcia_resource.c | 137 +++++++++-------------
drivers/scsi/pcmcia/aha152x_stub.c | 6 +-
drivers/scsi/pcmcia/fdomain_stub.c | 6 +-
drivers/scsi/pcmcia/nsp_cs.c | 20 +---
drivers/scsi/pcmcia/qlogic_stub.c | 10 +-
drivers/scsi/pcmcia/sym53c500_cs.c | 6 +-
drivers/serial/serial_cs.c | 27 ++---
drivers/ssb/main.c | 2 +-
drivers/staging/comedi/drivers/cb_das16_cs.c | 26 +---
drivers/staging/comedi/drivers/das08_cs.c | 16 +--
drivers/staging/comedi/drivers/ni_daq_700.c | 23 +---
drivers/staging/comedi/drivers/ni_daq_dio24.c | 23 +---
drivers/staging/comedi/drivers/ni_labpc_cs.c | 24 +---
drivers/staging/comedi/drivers/ni_mio_cs.c | 9 +-
drivers/staging/comedi/drivers/quatech_daqp_cs.c | 22 +---
drivers/staging/netwave/netwave_cs.c | 8 +-
drivers/staging/wavelan/wavelan_cs.c | 15 +--
drivers/staging/wlags49_h2/wl_cs.c | 9 +-
drivers/usb/host/sl811_cs.c | 18 +--
include/pcmcia/cs.h | 7 -
include/pcmcia/ds.h | 11 ++-
sound/pcmcia/pdaudiocf/pdaudiocf.c | 9 +-
sound/pcmcia/vx/vxpocket.c | 8 +-
58 files changed, 244 insertions(+), 593 deletions(-)
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 446f43b..3268a9a 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,4 +1,14 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
+* New IRQ request rules (as of 2.6.35)
+ Instead of the old pcmcia_request_irq() interface, drivers may now
+ choose between:
+ - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.
+ - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
+ clean up automatically on calls to pcmcia_disable_device() or
+ device ejection.
+ - drivers still not capable of IRQF_SHARED (or not telling us so) may
+ use the deprecated pcmcia_request_exclusive_irq() for the time
+ being; they might receive a shared IRQ nonetheless.
* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
Instead of the cs_error() callback or the CS_CHECK() macro, please use
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index d94b8f0..2aab1e0 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -268,7 +268,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
pdev->io.IOAddrLines = 3;
- pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
@@ -293,8 +292,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
}
io_base = pdev->io.BasePort1;
ctl_base = stk->ctl_base;
- ret = pcmcia_request_irq(pdev, &pdev->irq);
- if (ret)
+ if (!pdev->irq)
goto failed;
ret = pcmcia_request_configuration(pdev, &pdev->conf);
@@ -344,7 +342,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
}
/* activate */
- ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
+ ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &pcmcia_sht);
if (ret)
goto failed;
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index d9bf87c..a34653d 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -869,9 +869,6 @@ static int bluecard_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-
- link->irq.Handler = bluecard_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -908,9 +905,9 @@ static int bluecard_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
- i = pcmcia_request_irq(link, &link->irq);
+ i = pcmcia_request_irq(link, bluecard_interrupt);
if (i != 0)
- link->irq.AssignedIRQ = 0;
+ goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 027cb8b..1ad9694 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -661,9 +661,6 @@ static int bt3c_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-
- link->irq.Handler = bt3c_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -743,9 +740,9 @@ static int bt3c_config(struct pcmcia_device *link)
goto failed;
found_port:
- i = pcmcia_request_irq(link, &link->irq);
+ i = pcmcia_request_irq(link, &bt3c_interrupt);
if (i != 0)
- link->irq.AssignedIRQ = 0;
+ goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 60c0953..1073d66 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -590,9 +590,6 @@ static int btuart_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-
- link->irq.Handler = btuart_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -672,9 +669,9 @@ static int btuart_config(struct pcmcia_device *link)
goto failed;
found_port:
- i = pcmcia_request_irq(link, &link->irq);
+ i = pcmcia_request_irq(link, btuart_interrupt);
if (i != 0)
- link->irq.AssignedIRQ = 0;
+ goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 1778831..3d72afd 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -575,9 +575,6 @@ static int dtl1_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-
- link->irq.Handler = dtl1_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -621,9 +618,9 @@ static int dtl1_config(struct pcmcia_device *link)
if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
goto failed;
- i = pcmcia_request_irq(link, &link->irq);
+ i = pcmcia_request_irq(link, dtl1_interrupt);
if (i != 0)
- link->irq.AssignedIRQ = 0;
+ goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index dff24da..2237890 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -195,9 +195,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = ipwireless_interrupt;
-
INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1,
@@ -205,8 +202,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
ipw->is_v2_card, signalled_reboot_callback,
ipw);
- ret = pcmcia_request_irq(link, &link->irq);
-
+ ret = pcmcia_request_irq(link, ipwireless_interrupt);
if (ret != 0)
goto exit;
@@ -217,7 +213,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
(unsigned int) link->io.BasePort1,
(unsigned int) (link->io.BasePort1 +
link->io.NumPorts1 - 1),
- (unsigned int) link->irq.AssignedIRQ);
+ (unsigned int) link->irq);
if (ipw->attr_memory && ipw->common_memory)
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
": attr memory 0x%08lx-0x%08lx, common memory 0x%08lx-0x%08lx\n",
@@ -271,8 +267,6 @@ exit:
static void release_ipwireless(struct ipw_dev *ipw)
{
- pcmcia_disable_device(ipw->link);
-
if (ipw->common_memory) {
release_mem_region(ipw->request_common_memory.Base,
ipw->request_common_memory.Size);
@@ -288,7 +282,6 @@ static void release_ipwireless(struct ipw_dev *ipw)
if (ipw->attr_memory)
pcmcia_release_window(ipw->link, ipw->handle_attr_memory);
- /* Break the link with Card Services */
pcmcia_disable_device(ipw->link);
}
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index c31a0d9..027690b 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -552,10 +552,6 @@ static int mgslpc_probe(struct pcmcia_device *link)
/* Initialize the struct pcmcia_device structure */
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -608,9 +604,7 @@ static int mgslpc_config(struct pcmcia_device *link)
link->conf.ConfigIndex = 8;
link->conf.Present = PRESENT_OPTION;
- link->irq.Handler = mgslpc_isr;
-
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, mgslpc_isr);
if (ret)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@@ -618,7 +612,7 @@ static int mgslpc_config(struct pcmcia_device *link)
goto failed;
info->io_base = link->io.BasePort1;
- info->irq_level = link->irq.AssignedIRQ;
+ info->irq_level = link->irq;
/* add to linked list of devices */
sprintf(info->node.dev_name, "mgslpc0");
@@ -628,7 +622,7 @@ static int mgslpc_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x:",
info->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index b854508..17ad91e 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -102,7 +102,6 @@ static int ide_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = 3;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -285,8 +284,7 @@ static int ide_config(struct pcmcia_device *link)
io_base = link->io.BasePort1;
ctl_base = stk->ctl_base;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
+ if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
@@ -299,11 +297,11 @@ static int ide_config(struct pcmcia_device *link)
if (is_kme)
outb(0x81, ctl_base+1);
- host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+ host = idecs_register(io_base, ctl_base, link->irq, link);
if (host == NULL && link->io.NumPorts1 == 0x20) {
outb(0x02, ctl_base + 0x10);
host = idecs_register(io_base + 0x10, ctl_base + 0x10,
- link->irq.AssignedIRQ, link);
+ link->irq, link);
}
if (host == NULL)
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index 94b796d..0d485f6 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -107,9 +107,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.NumPorts2 = 0;
- /* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -172,7 +169,7 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev,
static int avmcs_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int i;
+ int i = -1;
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
@@ -190,11 +187,7 @@ static int avmcs_config(struct pcmcia_device *link)
return -ENODEV;
do {
- /*
- * allocate an interrupt line
- */
- i = pcmcia_request_irq(link, &link->irq);
- if (i != 0) {
+ if (!link->irq) {
/* undo */
pcmcia_disable_device(link);
break;
@@ -249,9 +242,9 @@ static int avmcs_config(struct pcmcia_device *link)
default:
case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
}
- if ((i = (*addcard)(link->io.BasePort1, link->irq.AssignedIRQ)) < 0) {
+ if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) {
printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n",
- dev->node.dev_name, link->io.BasePort1, link->irq.AssignedIRQ);
+ dev->node.dev_name, link->io.BasePort1, link->irq);
avmcs_release(link);
return -ENODEV;
}
@@ -270,7 +263,7 @@ static int avmcs_config(struct pcmcia_device *link)
static void avmcs_release(struct pcmcia_device *link)
{
- b1pcmcia_delcard(link->io.BasePort1, link->irq.AssignedIRQ);
+ b1pcmcia_delcard(link->io.BasePort1, link->irq);
pcmcia_disable_device(link);
} /* avmcs_release */
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 8d1d63a..3ae2176 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -119,9 +119,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
p_dev->io.IOAddrLines = 5;
- /* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -177,7 +174,7 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev,
static int __devinit avma1cs_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int i;
+ int i = -1;
char devname[128];
IsdnCard_t icard;
int busy = 0;
@@ -197,8 +194,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
/*
* allocate an interrupt line
*/
- i = pcmcia_request_irq(link, &link->irq);
- if (i != 0) {
+ if (!link->irq) {
/* undo */
pcmcia_disable_device(link);
break;
@@ -230,9 +226,9 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
}
printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
- link->io.BasePort1, link->irq.AssignedIRQ);
+ link->io.BasePort1, link->irq);
- icard.para[0] = link->irq.AssignedIRQ;
+ icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = isdnprot;
icard.typ = ISDN_CTYPE_A1_PCMCIA;
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index c9f2279..8e170e4 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -136,10 +136,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
local->cardnr = -1;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -223,11 +219,8 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
- i = pcmcia_request_irq(link, &link->irq);
- if (i != 0) {
- link->irq.AssignedIRQ = 0;
+ if (!link->irq)
goto failed;
- }
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
@@ -244,7 +237,7 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x: ",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
@@ -253,7 +246,7 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
- icard.para[0] = link->irq.AssignedIRQ;
+ icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_ELSA_PCMCIA;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 71b3dde..7778385 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -143,10 +143,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -227,9 +223,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -313,17 +307,6 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
goto failed;
/*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
-
- /*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
@@ -346,7 +329,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
@@ -358,7 +341,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
req->Base+req->Size-1);
printk("\n");
- icard.para[0] = link->irq.AssignedIRQ;
+ icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index d010a0d..02dec13 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -126,10 +126,6 @@ static int __devinit teles_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -213,11 +209,8 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
if (i != 0)
goto cs_failed;
- i = pcmcia_request_irq(link, &link->irq);
- if (i != 0) {
- link->irq.AssignedIRQ = 0;
+ if (!link->irq)
goto cs_failed;
- }
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
@@ -234,7 +227,7 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x:",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
@@ -243,7 +236,7 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
- icard.para[0] = link->irq.AssignedIRQ;
+ icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_TELESPCMCIA;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 757f87b..1442831 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -283,8 +283,6 @@ static int tc574_probe(struct pcmcia_device *link)
spin_lock_init(&lp->window_lock);
link->io.NumPorts1 = 32;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = &el3_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -353,7 +351,7 @@ static int tc574_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, el3_interrupt);
if (ret)
goto failed;
@@ -361,7 +359,7 @@ static int tc574_config(struct pcmcia_device *link)
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
ioaddr = dev->base_addr;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 091e0b0..405d772 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -194,8 +194,7 @@ static int tc589_probe(struct pcmcia_device *link)
spin_lock_init(&lp->lock);
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = &el3_interrupt;
+
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -271,7 +270,7 @@ static int tc589_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, el3_interrupt);
if (ret)
goto failed;
@@ -279,7 +278,7 @@ static int tc589_config(struct pcmcia_device *link)
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
ioaddr = dev->base_addr;
EL3WINDOW(0);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 9f3d593..967547a 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -168,7 +168,6 @@ static int axnet_probe(struct pcmcia_device *link)
info = PRIV(dev);
info->p_dev = link;
link->priv = dev;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -265,12 +264,9 @@ static int try_io_port(struct pcmcia_device *link)
int j, ret;
if (link->io.NumPorts1 == 32) {
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (link->io.NumPorts2 > 0) {
- /* for master/slave multifunction cards */
+ /* for master/slave multifunction cards */
+ if (link->io.NumPorts2 > 0)
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->irq.Attributes =
- IRQ_TYPE_DYNAMIC_SHARING;
- }
} else {
/* This should be two 16-port windows */
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
@@ -336,8 +332,7 @@ static int axnet_config(struct pcmcia_device *link)
if (ret != 0)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
+ if (!link->irq)
goto failed;
if (link->io.NumPorts2 == 8) {
@@ -349,7 +344,7 @@ static int axnet_config(struct pcmcia_device *link)
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
if (!get_prom(link)) {
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 21d9c9d..278438b 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -163,7 +163,6 @@ static int com20020_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.NumPorts1 = 16;
p_dev->io.IOAddrLines = 16;
- p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -275,15 +274,14 @@ static int com20020_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
dev_dbg(&link->dev, "request IRQ %d\n",
- link->irq.AssignedIRQ);
- i = pcmcia_request_irq(link, &link->irq);
- if (i != 0)
+ link->irq);
+ if (!link->irq)
{
dev_dbg(&link->dev, "requestIRQ failed totally!\n");
goto failed;
}
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index b9dc80b..31f1a03 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -254,10 +254,6 @@ static int fmvj18x_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 5;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = fjn_interrupt;
-
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -425,8 +421,6 @@ static int fmvj18x_config(struct pcmcia_device *link)
}
if (link->io.NumPorts2 != 0) {
- link->irq.Attributes =
- IRQ_TYPE_DYNAMIC_SHARING;
ret = mfc_try_io_port(link);
if (ret != 0) goto failed;
} else if (cardtype == UNGERMANN) {
@@ -437,14 +431,14 @@ static int fmvj18x_config(struct pcmcia_device *link)
if (ret)
goto failed;
}
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, fjn_interrupt);
if (ret)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
if (link->io.BasePort2 != 0) {
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 37f4a6f..0225cdf 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -156,8 +156,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 4;
link->io.IOAddrLines = 16;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
- link->irq.Handler = ibmtr_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -238,11 +236,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
}
dev->base_addr = link->io.BasePort1;
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
- ti->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
+ ti->irq = link->irq;
ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
/* Allocate the MMIO memory window */
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index c717b14..b779e3a 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -463,8 +463,6 @@ static int nmclan_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 32;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 5;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
- link->irq.Handler = mace_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -652,14 +650,14 @@ static int nmclan_config(struct pcmcia_device *link)
ret = pcmcia_request_io(link, &link->io);
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
if (ret)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
ioaddr = dev->base_addr;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 4c0368d..af09be4 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -264,7 +264,6 @@ static int pcnet_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = dev;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -488,8 +487,6 @@ static int try_io_port(struct pcmcia_device *link)
if (link->io.NumPorts2 > 0) {
/* for master/slave multifunction cards */
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->irq.Attributes =
- IRQ_TYPE_DYNAMIC_SHARING;
}
} else {
/* This should be two 16-port windows */
@@ -559,8 +556,7 @@ static int pcnet_config(struct pcmcia_device *link)
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
+ if (!link->irq)
goto failed;
if (link->io.NumPorts2 == 8) {
@@ -574,7 +570,7 @@ static int pcnet_config(struct pcmcia_device *link)
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
if (info->flags & HAS_MISC_REG) {
if ((if_port == 1) || (if_port == 2))
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index ccc5537..ad061c7 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -329,8 +329,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 4;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = &smc_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -453,7 +451,6 @@ static int mhz_mfc_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->io.IOAddrLines = 16;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
@@ -652,7 +649,6 @@ static int osi_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->io.NumPorts1 = 64;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
@@ -877,7 +873,7 @@ static int smc91c92_config(struct pcmcia_device *link)
if (i)
goto config_failed;
- i = pcmcia_request_irq(link, &link->irq);
+ i = pcmcia_request_irq(link, smc_interrupt);
if (i)
goto config_failed;
i = pcmcia_request_configuration(link, &link->conf);
@@ -887,7 +883,7 @@ static int smc91c92_config(struct pcmcia_device *link)
if (smc->manfid == MANFID_MOTOROLA)
mot_config(link);
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
if ((if_port >= 0) && (if_port <= 2))
dev->if_port = if_port;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 4d1802e..c9e7d7d 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -555,7 +555,6 @@ xirc2ps_probe(struct pcmcia_device *link)
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->irq.Handler = xirc2ps_interrupt;
/* Fill in card specific entries */
dev->netdev_ops = &netdev_ops;
@@ -841,7 +840,6 @@ xirc2ps_config(struct pcmcia_device * link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status |= CCSR_AUDIO_ENA;
}
- link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
link->io.NumPorts2 = 8;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
@@ -866,7 +864,6 @@ xirc2ps_config(struct pcmcia_device * link)
}
printk(KNOT_XIRC "no ports available\n");
} else {
- link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
link->io.NumPorts1 = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
link->io.BasePort1 = ioaddr;
@@ -885,7 +882,7 @@ xirc2ps_config(struct pcmcia_device * link)
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
- if ((err=pcmcia_request_irq(link, &link->irq)))
+ if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
goto config_error;
/****************
@@ -982,7 +979,7 @@ xirc2ps_config(struct pcmcia_device * link)
printk(KNOT_XIRC "invalid if_port requested\n");
/* we can now register the device with the net subsystem */
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
if (local->dingo)
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index f6036fb..7867c51 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -132,10 +132,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
dev_dbg(&p_dev->dev, "airo_attach()\n");
- /* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -212,9 +208,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -300,16 +294,8 @@ static int airo_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ if (!link->irq)
+ goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@@ -320,7 +306,7 @@ static int airo_config(struct pcmcia_device *link)
if (ret)
goto failed;
((local_info_t *)link->priv)->eth_dev =
- init_airo_card(link->irq.AssignedIRQ,
+ init_airo_card(link->irq,
link->io.BasePort1, 1, &link->dev);
if (!((local_info_t *)link->priv)->eth_dev)
goto failed;
@@ -338,8 +324,7 @@ static int airo_config(struct pcmcia_device *link)
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 3240791..759cdc4 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -141,10 +141,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
dev_dbg(&p_dev->dev, "atmel_attach()\n");
- /* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -226,9 +222,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -278,15 +272,9 @@ static int atmel_config(struct pcmcia_device *link)
if (pcmcia_loop_config(link, atmel_config_check, NULL))
goto failed;
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
+ if (!link->irq) {
+ dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
+ goto failed;
}
/*
@@ -298,14 +286,8 @@ static int atmel_config(struct pcmcia_device *link)
if (ret)
goto failed;
- if (link->irq.AssignedIRQ == 0) {
- printk(KERN_ALERT
- "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
- goto failed;
- }
-
((local_info_t*)link->priv)->eth_dev =
- init_atmel_card(link->irq.AssignedIRQ,
+ init_atmel_card(link->irq,
link->io.BasePort1,
did ? did->driver_info : ATMEL_FW_TYPE_NONE,
&link->dev,
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 609e705..0e99b63 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -98,10 +98,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
if (res != 0)
goto err_disable;
- dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- dev->irq.Handler = NULL; /* The handler is registered later. */
- res = pcmcia_request_irq(dev, &dev->irq);
- if (res != 0)
+ if (!dev->irq)
goto err_disable;
res = pcmcia_request_configuration(dev, &dev->conf);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index a36501d..5e2efbb 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -556,15 +556,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
- else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
- /* At least Compaq WL200 does not have IRQInfo1 set,
- * but it does not work without interrupts.. */
- printk(KERN_WARNING "Config has no IRQ info, but trying to "
- "enable IRQ anyway..\n");
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
- }
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
@@ -636,18 +628,9 @@ static int prism2_config(struct pcmcia_device *link)
strcpy(hw_priv->node.dev_name, dev->name);
link->dev_node = &hw_priv->node;
- /*
- * Allocate an interrupt line. Note that this does not assign a
- * handler to the interrupt, unless the 'Handler' member of the
- * irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = prism2_interrupt;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ ret = pcmcia_request_irq(link, prism2_interrupt);
+ if (ret)
+ goto failed;
/*
* This actually configures the PCMCIA socket -- setting up
@@ -658,7 +641,7 @@ static int prism2_config(struct pcmcia_device *link)
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
/* Finally, report what we've done */
@@ -668,7 +651,7 @@ static int prism2_config(struct pcmcia_device *link)
printk(", Vpp %d.%d", link->conf.Vpp / 10,
link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 6d55439..08e4e39 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -777,7 +777,7 @@ static void if_cs_release(struct pcmcia_device *p_dev)
lbs_deb_enter(LBS_DEB_CS);
- free_irq(p_dev->irq.AssignedIRQ, card);
+ free_irq(p_dev->irq, card);
pcmcia_disable_device(p_dev);
if (card->iobase)
ioport_unmap(card->iobase);
@@ -807,8 +807,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
p_dev->io.NumPorts1 = cfg->io.win[0].len;
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
if (cfg->io.nwin != 1) {
@@ -837,9 +836,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
card->p_dev = p_dev;
p_dev->priv = card;
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.Handler = NULL;
-
p_dev->conf.Attributes = 0;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -854,13 +850,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(p_dev, &p_dev->irq);
- if (ret) {
- lbs_pr_err("error in pcmcia_request_irq\n");
- goto out1;
- }
- }
+ if (!p_dev->irq)
+ goto out1;
/* Initialize io access */
card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
@@ -883,7 +874,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
/* Finally, report what we've done */
lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
- p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
+ p_dev->irq, p_dev->io.BasePort1,
p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
/*
@@ -940,7 +931,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
priv->fw_ready = 1;
/* Now actually get the IRQ */
- ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
+ ret = request_irq(p_dev->irq, if_cs_interrupt,
IRQF_SHARED, DRV_NAME, card);
if (ret) {
lbs_pr_err("error in request_irq\n");
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 1d4ada1..5d29b11 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -119,10 +119,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
card->p_dev = link;
link->priv = priv;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = orinoco_interrupt;
-
/* General socket configuration defaults can go here. In this
* client, we assume very little, and rely on the CIS for
* almost everything. In most clients, many details (i.e.,
@@ -258,12 +254,7 @@ orinoco_cs_config(struct pcmcia_device *link)
goto failed;
}
- /*
- * Allocate an interrupt line. Note that this does not assign
- * a handler to the interrupt, unless the 'Handler' member of
- * the irq structure is initialized.
- */
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
if (ret)
goto failed;
@@ -296,7 +287,7 @@ orinoco_cs_config(struct pcmcia_device *link)
/* Register an interface with the stack */
if (orinoco_if_add(priv, link->io.BasePort1,
- link->irq.AssignedIRQ) != 0) {
+ link->irq) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 59bda24..7a8e056 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -193,10 +193,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
card->p_dev = link;
link->priv = priv;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = orinoco_interrupt;
-
/* General socket configuration defaults can go here. In this
* client, we assume very little, and rely on the CIS for
* almost everything. In most clients, many details (i.e.,
@@ -332,12 +328,7 @@ spectrum_cs_config(struct pcmcia_device *link)
goto failed;
}
- /*
- * Allocate an interrupt line. Note that this does not assign
- * a handler to the interrupt, unless the 'Handler' member of
- * the irq structure is initialized.
- */
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
if (ret)
goto failed;
@@ -374,7 +365,7 @@ spectrum_cs_config(struct pcmcia_device *link)
/* Register an interface with the stack */
if (orinoco_if_add(priv, link->io.BasePort1,
- link->irq.AssignedIRQ) != 0) {
+ link->irq) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 11865ea..fe4642a 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -321,10 +321,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = 5;
- /* Interrupt setup. For PCMCIA, driver takes what's given */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.Handler = &ray_interrupt;
-
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -417,10 +413,10 @@ static int ray_config(struct pcmcia_device *link)
/* Now allocate an interrupt line. Note that this does not
actually assign a handler to the interrupt.
*/
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, ray_interrupt);
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
/* This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping.
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 7b9621d..c43f05b 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1897,10 +1897,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = 5;
- /* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.Handler = wl3501_interrupt;
-
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -1961,7 +1957,7 @@ static int wl3501_config(struct pcmcia_device *link)
/* Now allocate an interrupt line. Note that this does not actually
* assign a handler to the interrupt. */
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, wl3501_interrupt);
if (ret)
goto failed;
@@ -1972,7 +1968,7 @@ static int wl3501_config(struct pcmcia_device *link)
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev)) {
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 7dd370f..80c9052 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -105,7 +105,6 @@ static int parport_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -174,20 +173,19 @@ static int parport_config(struct pcmcia_device *link)
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
+ if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
- link->irq.AssignedIRQ, PARPORT_DMA_NONE,
+ link->irq, PARPORT_DMA_NONE,
&link->dev, IRQF_SHARED);
if (p == NULL) {
printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
"0x%3x, irq %u failed\n", link->io.BasePort1,
- link->irq.AssignedIRQ);
+ link->irq);
goto failed;
}
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 5fd2948..a2649c7 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -546,7 +546,6 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu
p_dev->function_config = tmp_dev->function_config;
p_dev->io = tmp_dev->io;
p_dev->irq = tmp_dev->irq;
- p_dev->irq_v = tmp_dev->irq_v;
kref_get(&p_dev->function_config->ref);
}
@@ -571,7 +570,7 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu
dev_printk(KERN_NOTICE, &p_dev->dev,
"pcmcia: registering new device %s (IRQ: %d)\n",
- p_dev->devname, p_dev->irq_v);
+ p_dev->devname, p_dev->irq);
pcmcia_device_query(p_dev);
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 8dce223..f355c5a 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -408,41 +408,6 @@ out:
} /* pcmcia_release_io */
-static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req)
-{
- struct pcmcia_socket *s = p_dev->socket;
- config_t *c;
- int ret = -EINVAL;
-
- mutex_lock(&s->ops_mutex);
-
- c = p_dev->function_config;
-
- if (!p_dev->_irq)
- goto out;
-
- p_dev->_irq = 0;
-
- if (c->state & CONFIG_LOCKED)
- goto out;
-
- if (s->pcmcia_irq != req->AssignedIRQ) {
- dev_dbg(&s->dev, "IRQ must match assigned one\n");
- goto out;
- }
-
- if (req->Handler)
- free_irq(req->AssignedIRQ, p_dev->priv);
-
- ret = 0;
-
-out:
- mutex_unlock(&s->ops_mutex);
-
- return ret;
-} /* pcmcia_release_irq */
-
-
int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh)
{
struct pcmcia_socket *s = p_dev->socket;
@@ -681,61 +646,66 @@ out:
EXPORT_SYMBOL(pcmcia_request_io);
-/** pcmcia_request_irq
+/**
+ * pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device
*
- * Request_irq() reserves an irq for this client.
+ * pcmcia_request_irq() is a wrapper around request_irq which will allow
+ * the PCMCIA core to clean up the registration in pcmcia_disable_device().
+ * Drivers are free to use request_irq() directly, but then they need to
+ * call free_irq themselfves, too. Also, only IRQF_SHARED capable IRQ
+ * handlers are allowed.
*/
-
-int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
+int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev,
+ irq_handler_t handler)
{
- struct pcmcia_socket *s = p_dev->socket;
- config_t *c;
- int ret = -EINVAL, irq = p_dev->irq_v;
- int type = IRQF_SHARED;
+ int ret;
- mutex_lock(&s->ops_mutex);
+ if (!p_dev->irq)
+ return -EINVAL;
- if (!(s->state & SOCKET_PRESENT)) {
- dev_dbg(&s->dev, "No card present\n");
- goto out;
- }
- c = p_dev->function_config;
- if (c->state & CONFIG_LOCKED) {
- dev_dbg(&s->dev, "Configuration is locked\n");
- goto out;
- }
+ ret = request_irq(p_dev->irq, handler, IRQF_SHARED,
+ p_dev->devname, p_dev->priv);
+ if (!ret)
+ p_dev->_irq = 1;
- if (!irq) {
- dev_dbg(&s->dev, "no IRQ available\n");
- goto out;
- }
+ return ret;
+}
+EXPORT_SYMBOL(pcmcia_request_irq);
- if (!(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
- req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
- dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
- "needs updating to supported shared IRQ lines.\n");
- }
- if (req->Handler) {
- ret = request_irq(irq, req->Handler, type,
- p_dev->devname, p_dev->priv);
- if (ret) {
- dev_printk(KERN_INFO, &s->dev,
- "request_irq() failed\n");
- goto out;
- }
- }
+/**
+ * pcmcia_request_exclusive_irq() - attempt to request an exclusive IRQ first
+ *
+ * pcmcia_request_exclusive_irq() is a wrapper around request_irq which
+ * attempts first to request an exclusive IRQ. If it fails, it also accepts
+ * a shared IRQ, but prints out a warning. PCMCIA drivers should allow for
+ * IRQ sharing and either use request_irq directly (then they need to call
+ * free_irq themselves, too), or the pcmcia_request_irq() function.
+ */
+int __must_check
+pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, irq_handler_t handler)
+{
+ int ret;
- req->AssignedIRQ = irq;
+ if (!p_dev->irq)
+ return -EINVAL;
- p_dev->_irq = 1;
+ ret = request_irq(p_dev->irq, handler, 0, p_dev->devname, p_dev->priv);
+ if (ret) {
+ ret = pcmcia_request_irq(p_dev, handler);
+ dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
+ "request for exclusive IRQ could not be fulfilled.\n");
+ dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
+ "needs updating to supported shared IRQ lines.\n");
+ }
+ if (ret)
+ dev_printk(KERN_INFO, &p_dev->dev, "request_irq() failed\n");
+ else
+ p_dev->_irq = 1;
- ret = 0;
-out:
- mutex_unlock(&s->ops_mutex);
return ret;
-} /* pcmcia_request_irq */
-EXPORT_SYMBOL(pcmcia_request_irq);
+} /* pcmcia_request_exclusive_irq */
+EXPORT_SYMBOL(pcmcia_request_exclusive_irq);
#ifdef CONFIG_PCMCIA_PROBE
@@ -779,7 +749,7 @@ static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type)
p_dev);
if (!ret) {
free_irq(irq, p_dev);
- p_dev->irq_v = s->pcmcia_irq = irq;
+ p_dev->irq = s->pcmcia_irq = irq;
pcmcia_used_irq[irq]++;
break;
}
@@ -820,12 +790,12 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev)
{
struct pcmcia_socket *s = p_dev->socket;
- if (p_dev->irq_v)
+ if (p_dev->irq)
return 0;
/* already assigned? */
if (s->pcmcia_irq) {
- p_dev->irq_v = s->pcmcia_irq;
+ p_dev->irq = s->pcmcia_irq;
return 0;
}
@@ -839,7 +809,7 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev)
/* but use the PCI irq otherwise */
if (s->pci_irq) {
- p_dev->irq_v = s->pcmcia_irq = s->pci_irq;
+ p_dev->irq = s->pcmcia_irq = s->pci_irq;
return 0;
}
@@ -947,7 +917,8 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev)
{
pcmcia_release_configuration(p_dev);
pcmcia_release_io(p_dev, &p_dev->io);
- pcmcia_release_irq(p_dev, &p_dev->irq);
+ if (p_dev->_irq)
+ free_irq(p_dev->irq, p_dev->priv);
if (p_dev->win)
pcmcia_release_window(p_dev, p_dev->win);
}
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 528733b..c1de4ba 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -105,7 +105,6 @@ static int aha152x_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 0x20;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -160,8 +159,7 @@ static int aha152x_config_cs(struct pcmcia_device *link)
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
+ if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@@ -172,7 +170,7 @@ static int aha152x_config_cs(struct pcmcia_device *link)
memset(&s, 0, sizeof(s));
s.conf = "PCMCIA setup";
s.io_port = link->io.BasePort1;
- s.irq = link->irq.AssignedIRQ;
+ s.irq = link->irq;
s.scsiid = host_id;
s.reconnect = reconnect;
s.parity = parity;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 9140406..8cb6d71 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -88,7 +88,6 @@ static int fdomain_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 0x10;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -133,8 +132,7 @@ static int fdomain_config(struct pcmcia_device *link)
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
+ if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
@@ -144,7 +142,7 @@ static int fdomain_config(struct pcmcia_device *link)
release_region(link->io.BasePort1, link->io.NumPorts1);
/* Set configuration options for the fdomain driver */
- sprintf(str, "%d,%d", link->io.BasePort1, link->irq.AssignedIRQ);
+ sprintf(str, "%d,%d", link->io.BasePort1, link->irq);
fdomain_setup(str);
host = __fdomain_16x0_detect(&fdomain_driver_template);
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 0212464..24c78ed 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1563,13 +1563,6 @@ static int nsp_cs_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10; /* not used */
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-
- /* Interrupt handler */
- link->irq.Handler = &nspintr;
- link->irq.Attributes |= IRQF_SHARED;
-
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -1646,8 +1639,7 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
}
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -1720,10 +1712,8 @@ static int nsp_cs_config(struct pcmcia_device *link)
if (ret)
goto cs_failed;
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- if (pcmcia_request_irq(link, &link->irq))
- goto cs_failed;
- }
+ if (pcmcia_request_irq(link, nspintr))
+ goto cs_failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
@@ -1741,7 +1731,7 @@ static int nsp_cs_config(struct pcmcia_device *link)
/* Set port and IRQ */
data->BaseAddress = link->io.BasePort1;
data->NumAddress = link->io.NumPorts1;
- data->IrqNumber = link->irq.AssignedIRQ;
+ data->IrqNumber = link->irq;
nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d",
data->BaseAddress, data->NumAddress, data->IrqNumber);
@@ -1775,7 +1765,7 @@ static int nsp_cs_config(struct pcmcia_device *link)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
}
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
}
if (link->io.NumPorts1) {
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index f85f094..c3a4428 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -161,7 +161,6 @@ static int qlogic_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -209,8 +208,7 @@ static int qlogic_config(struct pcmcia_device * link)
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
+ if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@@ -227,10 +225,10 @@ static int qlogic_config(struct pcmcia_device * link)
/* The KXL-810AN has a bigger IO port window */
if (link->io.NumPorts1 == 32)
host = qlogic_detect(&qlogicfas_driver_template, link,
- link->io.BasePort1 + 16, link->irq.AssignedIRQ);
+ link->io.BasePort1 + 16, link->irq);
else
host = qlogic_detect(&qlogicfas_driver_template, link,
- link->io.BasePort1, link->irq.AssignedIRQ);
+ link->io.BasePort1, link->irq);
if (!host) {
printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
@@ -258,7 +256,7 @@ static void qlogic_release(struct pcmcia_device *link)
scsi_remove_host(info->host);
- free_irq(link->irq.AssignedIRQ, info->host);
+ free_irq(link->irq, info->host);
pcmcia_disable_device(link);
scsi_host_put(info->host);
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index e7564d8..6eacf4c 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -719,8 +719,7 @@ SYM53C500_config(struct pcmcia_device *link)
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
+ if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@@ -752,7 +751,7 @@ SYM53C500_config(struct pcmcia_device *link)
* 0x320, 0x330, 0x340, 0x350
*/
port_base = link->io.BasePort1;
- irq_level = link->irq.AssignedIRQ;
+ irq_level = link->irq;
DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n",
port_base, irq_level, USE_FAST_PIO);)
@@ -866,7 +865,6 @@ SYM53C500_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 8cfa5b1..6459252 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -343,7 +343,6 @@ static int serial_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -486,7 +485,7 @@ static int simple_config(struct pcmcia_device *link)
}
if (info->slave) {
return setup_serial(link, info, port,
- link->irq.AssignedIRQ);
+ link->irq);
}
}
@@ -507,10 +506,6 @@ static int simple_config(struct pcmcia_device *link)
return -1;
found_port:
- i = pcmcia_request_irq(link, &link->irq);
- if (i != 0)
- link->irq.AssignedIRQ = 0;
-
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
@@ -523,7 +518,7 @@ found_port:
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
return -1;
- return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
+ return setup_serial(link, info, link->io.BasePort1, link->irq);
}
static int multi_config_check(struct pcmcia_device *p_dev,
@@ -586,13 +581,9 @@ static int multi_config(struct pcmcia_device *link)
}
}
- i = pcmcia_request_irq(link, &link->irq);
- if (i != 0) {
- /* FIXME: comment does not fit, error handling does not fit */
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
- link->irq.AssignedIRQ = 0;
- }
+ if (!link->irq)
+ dev_warn(&link->dev,
+ "serial_cs: no usable IRQ found, continuing...\n");
/*
* Apply any configuration quirks.
@@ -615,11 +606,11 @@ static int multi_config(struct pcmcia_device *link)
if (link->conf.ConfigIndex == 1 ||
link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
- link->irq.AssignedIRQ);
+ link->irq);
base2 = link->io.BasePort1;
} else {
err = setup_serial(link, info, link->io.BasePort1,
- link->irq.AssignedIRQ);
+ link->irq);
}
info->c950ctrl = base2;
@@ -633,10 +624,10 @@ static int multi_config(struct pcmcia_device *link)
return 0;
}
- setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
+ setup_serial(link, info, link->io.BasePort1, link->irq);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
- link->irq.AssignedIRQ);
+ link->irq);
return 0;
}
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 80ff7d9..bc9bdb2 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -490,7 +490,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
break;
case SSB_BUSTYPE_PCMCIA:
#ifdef CONFIG_SSB_PCMCIAHOST
- sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
+ sdev->irq = bus->host_pcmcia->irq;
dev->parent = &bus->host_pcmcia->dev;
#endif
break;
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 5632991..e0352c6 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -180,12 +180,12 @@ static int das16cs_attach(struct comedi_device *dev,
}
printk("\n");
- ret = request_irq(link->irq.AssignedIRQ, das16cs_interrupt,
+ ret = request_irq(link->irq, das16cs_interrupt,
IRQF_SHARED, "cb_das16_cs", dev);
if (ret < 0) {
return ret;
}
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
printk("irq=%u ", dev->irq);
dev->board_ptr = das16cs_probe(dev, link);
@@ -702,10 +702,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
link->priv = local;
/* Initialize the pcmcia_device structure */
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -740,8 +736,7 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -EINVAL;
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -780,16 +775,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
goto failed;
}
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ if (!link->irq)
+ goto failed;
+
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
@@ -811,7 +799,7 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %u", link->irq.AssignedIRQ);
+ printk(", irq %u", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index 9164ce1..bd69c4f 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -172,10 +172,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -229,8 +225,7 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -277,11 +272,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
goto failed;
}
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ if (!link->irq)
+ goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@@ -304,7 +296,7 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %u", link->irq.AssignedIRQ);
+ printk(", irq %u", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 7ea6453..072bc4b 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -380,7 +380,7 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return -EIO;
iobase = link->io.BasePort1;
#ifdef incomplete
- irq = link->irq.AssignedIRQ;
+ irq = link->irq;
#endif
break;
default:
@@ -502,10 +502,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -577,8 +573,7 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
}
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -639,16 +634,8 @@ static void dio700_config(struct pcmcia_device *link)
goto failed;
}
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ if (!link->irq)
+ goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@@ -671,7 +658,7 @@ static void dio700_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index ddc312b..2259fb4 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -131,7 +131,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return -EIO;
iobase = link->io.BasePort1;
#ifdef incomplete
- irq = link->irq.AssignedIRQ;
+ irq = link->irq;
#endif
break;
default:
@@ -253,10 +253,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -328,8 +324,7 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
}
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -390,16 +385,8 @@ static void dio24_config(struct pcmcia_device *link)
goto failed;
}
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ if (!link->irq)
+ goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@@ -422,7 +409,7 @@ static void dio24_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 6e4ed0d..907b2ae 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -144,7 +144,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (!link)
return -EIO;
iobase = link->io.BasePort1;
- irq = link->irq.AssignedIRQ;
+ irq = link->irq;
break;
default:
printk("bug! couldn't determine board type\n");
@@ -229,10 +229,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -306,9 +302,7 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
}
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |=
- (CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ);
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -368,16 +362,8 @@ static void labpc_config(struct pcmcia_device *link)
goto failed;
}
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ if (!link->irq)
+ goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@@ -400,7 +386,7 @@ static void labpc_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index dc4849a..a6007ab 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -272,7 +272,6 @@ static int cs_attach(struct pcmcia_device *link)
{
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
link->io.NumPorts1 = 16;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -344,10 +343,8 @@ static void mio_cs_config(struct pcmcia_device *link)
return;
}
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret) {
- printk("pcmcia_request_irq() returned error: %i\n", ret);
- }
+ if (!link->irq)
+ dev_info(&link->dev, "no IRQ available\n");
ret = pcmcia_request_configuration(link, &link->conf);
@@ -369,7 +366,7 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->driver = &driver_ni_mio_cs;
dev->iobase = link->io.BasePort1;
- irq = link->irq.AssignedIRQ;
+ irq = link->irq;
printk("comedi%d: %s: DAQCard: io 0x%04lx, irq %u, ",
dev->minor, dev->driver->driver_name, dev->iobase, irq);
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 3325f24..7aa17f9 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -1040,10 +1040,6 @@ static int daqp_cs_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = daqp_interrupt;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -1105,8 +1101,7 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -1144,16 +1139,9 @@ static void daqp_cs_config(struct pcmcia_device *link)
goto failed;
}
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ ret = pcmcia_request_irq(link, daqp_interrupt);
+ if (ret)
+ goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@@ -1180,7 +1168,7 @@ static void daqp_cs_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %u", link->irq.AssignedIRQ);
+ printk(", irq %u", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
diff --git a/drivers/staging/netwave/netwave_cs.c b/drivers/staging/netwave/netwave_cs.c
index 3875a72..449e6a5 100644
--- a/drivers/staging/netwave/netwave_cs.c
+++ b/drivers/staging/netwave/netwave_cs.c
@@ -382,10 +382,6 @@ static int netwave_probe(struct pcmcia_device *link)
link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */
link->io.IOAddrLines = 5;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = &netwave_interrupt;
-
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -732,7 +728,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_irq(link, netwave_interrupt);
if (ret)
goto failed;
@@ -767,7 +763,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
ramBase = ioremap(req.Base, 0x8000);
priv->ramBase = ramBase;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
SET_NETDEV_DEV(dev, &link->dev);
diff --git a/drivers/staging/wavelan/wavelan_cs.c b/drivers/staging/wavelan/wavelan_cs.c
index 04f691d..37fa855 100644
--- a/drivers/staging/wavelan/wavelan_cs.c
+++ b/drivers/staging/wavelan/wavelan_cs.c
@@ -3850,12 +3850,8 @@ wv_pcmcia_config(struct pcmcia_device * link)
if (i != 0)
break;
- /*
- * Now allocate an interrupt line. Note that this does not
- * actually assign a handler to the interrupt.
- */
- i = pcmcia_request_irq(link, &link->irq);
- if (i != 0)
+ i = pcmcia_request_interrupt(link, wavelan_interrupt);
+ if (!i)
break;
/*
@@ -3890,7 +3886,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
break;
/* Feed device with this info... */
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
netif_start_queue(dev);
@@ -4437,10 +4433,6 @@ wavelan_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = 3;
- /* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.Handler = wavelan_interrupt;
-
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -4487,7 +4479,6 @@ wavelan_probe(struct pcmcia_device *p_dev)
ret = wv_hw_config(dev);
if (ret) {
- dev->irq = 0;
pcmcia_disable_device(p_dev);
return ret;
}
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index 9da42e6..c9d99d8 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -156,15 +156,12 @@ static int wl_adapter_attach(struct pcmcia_device *link)
link->io.NumPorts1 = HCF_NUM_IO_PORTS;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
link->io.IOAddrLines = 6;
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
- link->irq.Handler = &wl_isr;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 5;
link->conf.Present = PRESENT_OPTION;
- link->priv = link->irq.Instance = dev;
+ link->priv = dev;
lp = wl_priv(dev);
lp->link = link;
@@ -318,11 +315,11 @@ void wl_adapter_insert( struct pcmcia_device *link )
link->conf.Attributes |= CONF_ENABLE_IRQ;
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, wl_isr));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
SET_NETDEV_DEV(dev, &handle_to_dev(link));
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 39d253e..a712788 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -163,8 +163,7 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
/* we need an interrupt */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -197,11 +196,8 @@ static int sl811_cs_config(struct pcmcia_device *link)
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
goto failed;
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- } else
+
+ if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@@ -216,12 +212,12 @@ static int sl811_cs_config(struct pcmcia_device *link)
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
printk("\n");
- if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
+ if (sl811_hc_init(parent, link->io.BasePort1, link->irq)
< 0) {
failed:
printk(KERN_WARNING "sl811_cs_config failed\n");
@@ -241,10 +237,6 @@ static int sl811_cs_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /* Initialize */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
- link->irq.Handler = NULL;
-
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index af61571..a04e6ca 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -114,13 +114,6 @@ typedef struct io_req_t {
#define IO_DATA_PATH_WIDTH_16 0x08
#define IO_DATA_PATH_WIDTH_AUTO 0x10
-/* For RequestIRQ and ReleaseIRQ */
-typedef struct irq_req_t {
- u_int Attributes;
- u_int AssignedIRQ;
- irq_handler_t Handler;
-} irq_req_t;
-
/* Attributes for RequestIRQ and ReleaseIRQ */
#define IRQ_TYPE 0x03
#define IRQ_TYPE_EXCLUSIVE 0x00
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 52ebe75..d18330b 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -91,12 +91,11 @@ struct pcmcia_device {
dev_node_t *dev_node;
u_int open;
io_req_t io;
- irq_req_t irq;
config_req_t conf;
window_handle_t win;
/* device setup */
- unsigned int irq_v; /* do not use directly yet */
+ unsigned int irq;
/* Is the device suspended? */
u16 suspended:1;
@@ -194,7 +193,13 @@ int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
/* device configuration */
int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req);
-int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req);
+
+int __must_check __deprecated
+pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
+ irq_handler_t handler);
+int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev,
+ irq_handler_t handler);
+
int pcmcia_request_configuration(struct pcmcia_device *p_dev,
config_req_t *req);
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index dcf8539..60fddf3 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -142,11 +142,6 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.NumPorts1 = 16;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
- /* FIXME: This driver should be updated to allow for dynamic IRQ sharing */
- /* link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; */
-
- link->irq.Handler = pdacf_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -228,7 +223,7 @@ static int pdacf_config(struct pcmcia_device *link)
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_exclusive_irq(link, pdacf_interrupt);
if (ret)
goto failed;
@@ -236,7 +231,7 @@ static int pdacf_config(struct pcmcia_device *link)
if (ret)
goto failed;
- if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
+ if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq) < 0)
goto failed;
link->dev_node = &pdacf->node;
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index cfd1438..5eced7a 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -162,10 +162,6 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl,
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.NumPorts1 = 16;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-
- link->irq.Handler = &snd_vx_irq_handler;
-
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -235,7 +231,7 @@ static int vxpocket_config(struct pcmcia_device *link)
if (ret)
goto failed;
- ret = pcmcia_request_irq(link, &link->irq);
+ ret = pcmcia_request_exclusive_irq(link, snd_vx_irq_handler);
if (ret)
goto failed;
@@ -246,7 +242,7 @@ static int vxpocket_config(struct pcmcia_device *link)
chip->dev = &link->dev;
snd_card_set_dev(chip->card, chip->dev);
- if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
+ if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq) < 0)
goto failed;
link->dev_node = &vxp->node;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 08/29] pcmcia: dev_node removal (drivers with updated printk call)
[not found] <20100519064149.GA5755@comet.dominikbrodowski.net>
2010-05-19 6:42 ` [PATCH 05/29] pcmcia: re-work pcmcia_request_irq() Dominik Brodowski
2010-05-19 6:42 ` [PATCH 07/29] pcmcia: dev_node removal (write-only drivers) Dominik Brodowski
@ 2010-05-19 6:42 ` Dominik Brodowski
2010-05-19 6:42 ` [PATCH 09/29] pcmcia: dev_node removal (drivers with unregister_netdev check) Dominik Brodowski
3 siblings, 0 replies; 4+ messages in thread
From: Dominik Brodowski @ 2010-05-19 6:42 UTC (permalink / raw)
To: linux-pcmcia
Cc: netdev, linux-usb, linux-wireless, Harald Welte, linux-ide,
Dominik Brodowski
As a second step, remove any usage of dev_node_t from drivers which
only wrote to this typedef/struct, except one printk() which can
easily be replaced by a dev_info()/dev_warn() call.
CC: Harald Welte <laforge@gnumonks.org>
CC: linux-ide@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-usb@vger.kernel.org
Acked-by: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/char/pcmcia/cm4000_cs.c | 9 +-----
drivers/char/pcmcia/synclink_cs.c | 10 +-----
drivers/ide/ide-cs.c | 12 ++-----
drivers/isdn/hardware/avm/avm_cs.c | 60 +++---------------------------------
drivers/isdn/hisax/elsa_cs.c | 27 +---------------
drivers/isdn/hisax/sedlbauer_cs.c | 37 +---------------------
drivers/isdn/hisax/teles_cs.c | 37 +---------------------
drivers/net/wireless/airo_cs.c | 47 +---------------------------
drivers/usb/host/sl811_cs.c | 10 +-----
9 files changed, 22 insertions(+), 227 deletions(-)
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 90b199f..e7956ac 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -106,7 +106,6 @@ static int major; /* major number we get from the kernel */
struct cm4000_dev {
struct pcmcia_device *p_dev;
- dev_node_t node; /* OS node (major,minor) */
unsigned char atr[MAX_ATR];
unsigned char rbuf[512];
@@ -884,8 +883,7 @@ static void monitor_card(unsigned long p)
/* slow down warning, but prompt immediately after insertion */
if (dev->cwarn == 0 || dev->cwarn == 10) {
set_bit(IS_BAD_CARD, &dev->flags);
- printk(KERN_WARNING MODULE_NAME ": device %s: ",
- dev->node.dev_name);
+ dev_warn(&dev->p_dev->dev, MODULE_NAME ": ");
if (test_bit(IS_BAD_CSUM, &dev->flags)) {
DEBUGP(4, dev, "ATR checksum (0x%.2x, should "
"be zero) failed\n", dev->atr_csum);
@@ -1781,11 +1779,6 @@ static int cm4000_config(struct pcmcia_device * link, int devno)
goto cs_release;
dev = link->priv;
- sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);
- dev->node.major = major;
- dev->node.minor = devno;
- dev->node.next = NULL;
- link->dev_node = &dev->node;
return 0;
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 027690b..308903e 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -220,7 +220,6 @@ typedef struct _mgslpc_info {
/* PCMCIA support */
struct pcmcia_device *p_dev;
- dev_node_t node;
int stop;
/* SPPP/Cisco HDLC device parts */
@@ -614,13 +613,8 @@ static int mgslpc_config(struct pcmcia_device *link)
info->io_base = link->io.BasePort1;
info->irq_level = link->irq;
- /* add to linked list of devices */
- sprintf(info->node.dev_name, "mgslpc0");
- info->node.major = info->node.minor = 0;
- link->dev_node = &info->node;
-
- printk(KERN_INFO "%s: index 0x%02x:",
- info->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x:",
+ link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 17ad91e..0b7815d 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -65,8 +65,7 @@ MODULE_LICENSE("Dual MPL/GPL");
typedef struct ide_info_t {
struct pcmcia_device *p_dev;
struct ide_host *host;
- int ndev;
- dev_node_t node;
+ int ndev;
} ide_info_t;
static void ide_release(struct pcmcia_device *);
@@ -308,13 +307,10 @@ static int ide_config(struct pcmcia_device *link)
goto failed;
info->ndev = 1;
- sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2);
- info->node.major = host->ports[0]->major;
- info->node.minor = 0;
info->host = host;
- link->dev_node = &info->node;
- printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
- info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
+ dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n",
+ 'a' + host->ports[0]->index * 2,
+ link->conf.Vpp / 10, link->conf.Vpp % 10);
kfree(stk);
return 0;
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index 0d485f6..8bbc452 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -61,31 +61,6 @@ static void avmcs_release(struct pcmcia_device *link);
static void avmcs_detach(struct pcmcia_device *p_dev);
-/*
- A linked list of "instances" of the skeleton device. Each actual
- PCMCIA card corresponds to one device instance, and is described
- by one struct pcmcia_device structure (defined in ds.h).
-
- You may not want to use a linked list for this -- for example, the
- memory card driver uses an array of struct pcmcia_device pointers, where minor
- device numbers are used to derive the corresponding array index.
-*/
-
-/*
- A driver needs to provide a dev_node_t structure for each device
- on a card. In some cases, there is only one device per card (for
- example, ethernet cards, modems). In other cases, there may be
- many actual or logical devices (SCSI adapters, memory cards with
- multiple partitions). The dev_node_t structures need to be kept
- in a linked list starting at the 'dev' field of a struct pcmcia_device
- structure. We allocate them in the card's private data structure,
- because they generally can't be allocated dynamically.
-*/
-
-typedef struct local_info_t {
- dev_node_t node;
-} local_info_t;
-
/*======================================================================
avmcs_attach() creates an "instance" of the driver, allocating
@@ -100,7 +75,6 @@ typedef struct local_info_t {
static int avmcs_probe(struct pcmcia_device *p_dev)
{
- local_info_t *local;
/* The io structure describes IO port mapping */
p_dev->io.NumPorts1 = 16;
@@ -113,16 +87,7 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
p_dev->conf.ConfigIndex = 1;
p_dev->conf.Present = PRESENT_OPTION;
- /* Allocate space for private device-specific data */
- local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
- if (!local)
- goto err;
- p_dev->priv = local;
-
return avmcs_config(p_dev);
-
- err:
- return -ENOMEM;
} /* avmcs_attach */
/*======================================================================
@@ -137,7 +102,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
static void avmcs_detach(struct pcmcia_device *link)
{
avmcs_release(link);
- kfree(link->priv);
} /* avmcs_detach */
/*======================================================================
@@ -168,14 +132,11 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev,
static int avmcs_config(struct pcmcia_device *link)
{
- local_info_t *dev;
int i = -1;
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
- dev = link->priv;
-
devname[0] = 0;
if (link->prod_id[1])
strlcpy(devname, link->prod_id[1], sizeof(devname));
@@ -204,15 +165,11 @@ static int avmcs_config(struct pcmcia_device *link)
} while (0);
- /* At this point, the dev_node_t structure(s) should be
- initialized and arranged in a linked list at link->dev. */
-
if (devname[0]) {
char *s = strrchr(devname, ' ');
if (!s)
s = devname;
else s++;
- strcpy(dev->node.dev_name, s);
if (strcmp("M1", s) == 0) {
cardtype = AVM_CARDTYPE_M1;
} else if (strcmp("M2", s) == 0) {
@@ -220,14 +177,8 @@ static int avmcs_config(struct pcmcia_device *link)
} else {
cardtype = AVM_CARDTYPE_B1;
}
- } else {
- strcpy(dev->node.dev_name, "b1");
+ } else
cardtype = AVM_CARDTYPE_B1;
- }
-
- dev->node.major = 64;
- dev->node.minor = 0;
- link->dev_node = &dev->node;
/* If any step failed, release any partially configured state */
if (i != 0) {
@@ -243,12 +194,11 @@ static int avmcs_config(struct pcmcia_device *link)
case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
}
if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) {
- printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n",
- dev->node.dev_name, link->io.BasePort1, link->irq);
- avmcs_release(link);
- return -ENODEV;
+ dev_err(&link->dev, "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n",
+ link->io.BasePort1, link->irq);
+ avmcs_release(link);
+ return -ENODEV;
}
- dev->node.minor = i;
return 0;
} /* avmcs_config */
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 8e170e4..218927e 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -87,24 +87,8 @@ static void elsa_cs_release(struct pcmcia_device *link);
static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit;
-/*
- A driver needs to provide a dev_node_t structure for each device
- on a card. In some cases, there is only one device per card (for
- example, ethernet cards, modems). In other cases, there may be
- many actual or logical devices (SCSI adapters, memory cards with
- multiple partitions). The dev_node_t structures need to be kept
- in a linked list starting at the 'dev' field of a struct pcmcia_device
- structure. We allocate them in the card's private data structure,
- because they generally shouldn't be allocated dynamically.
- In this case, we also provide a flag to indicate if a device is
- "stopped" due to a power management event, or card ejection. The
- device IO routines can use a flag like this to throttle IO to a
- card that is not ready to accept it.
-*/
-
typedef struct local_info_t {
struct pcmcia_device *p_dev;
- dev_node_t node;
int busy;
int cardnr;
} local_info_t;
@@ -226,16 +210,9 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
- /* At this point, the dev_node_t structure(s) should be
- initialized and arranged in a linked list at link->dev. *//* */
- sprintf(dev->node.dev_name, "elsa");
- dev->node.major = dev->node.minor = 0x0;
-
- link->dev_node = &dev->node;
-
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x: ",
- dev->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x: ",
+ link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 7778385..1f4feaa 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -87,32 +87,8 @@ static void sedlbauer_release(struct pcmcia_device *link);
static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
-/*
- A driver needs to provide a dev_node_t structure for each device
- on a card. In some cases, there is only one device per card (for
- example, ethernet cards, modems). In other cases, there may be
- many actual or logical devices (SCSI adapters, memory cards with
- multiple partitions). The dev_node_t structures need to be kept
- in a linked list starting at the 'dev' field of a struct pcmcia_device
- structure. We allocate them in the card's private data structure,
- because they generally shouldn't be allocated dynamically.
-
- In this case, we also provide a flag to indicate if a device is
- "stopped" due to a power management event, or card ejection. The
- device IO routines can use a flag like this to throttle IO to a
- card that is not ready to accept it.
-*/
-
typedef struct local_info_t {
struct pcmcia_device *p_dev;
- dev_node_t node;
int stop;
int cardnr;
} local_info_t;
@@ -279,7 +255,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
- local_info_t *dev = link->priv;
win_req_t *req;
int ret;
IsdnCard_t icard;
@@ -315,17 +290,9 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /*
- At this point, the dev_node_t structure(s) need to be
- initialized and arranged in a linked list at link->dev.
- */
- sprintf(dev->node.dev_name, "sedlbauer");
- dev->node.major = dev->node.minor = 0;
- link->dev_node = &dev->node;
-
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x:",
- dev->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x:",
+ link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 02dec13..5771955 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -68,34 +68,8 @@ static void teles_cs_release(struct pcmcia_device *link);
static void teles_detach(struct pcmcia_device *p_dev) __devexit ;
-/*
- A linked list of "instances" of the teles_cs device. Each actual
- PCMCIA card corresponds to one device instance, and is described
- by one struct pcmcia_device structure (defined in ds.h).
-
- You may not want to use a linked list for this -- for example, the
- memory card driver uses an array of struct pcmcia_device pointers, where minor
- device numbers are used to derive the corresponding array index.
-*/
-
-/*
- A driver needs to provide a dev_node_t structure for each device
- on a card. In some cases, there is only one device per card (for
- example, ethernet cards, modems). In other cases, there may be
- many actual or logical devices (SCSI adapters, memory cards with
- multiple partitions). The dev_node_t structures need to be kept
- in a linked list starting at the 'dev' field of a struct pcmcia_device
- structure. We allocate them in the card's private data structure,
- because they generally shouldn't be allocated dynamically.
- In this case, we also provide a flag to indicate if a device is
- "stopped" due to a power management event, or card ejection. The
- device IO routines can use a flag like this to throttle IO to a
- card that is not ready to accept it.
-*/
-
typedef struct local_info_t {
struct pcmcia_device *p_dev;
- dev_node_t node;
int busy;
int cardnr;
} local_info_t;
@@ -216,16 +190,9 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
if (i != 0)
goto cs_failed;
- /* At this point, the dev_node_t structure(s) should be
- initialized and arranged in a linked list at link->dev. *//* */
- sprintf(dev->node.dev_name, "teles");
- dev->node.major = dev->node.minor = 0x0;
-
- link->dev_node = &dev->node;
-
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x:",
- dev->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x:",
+ link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 7867c51..33bdc6a 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -75,42 +75,7 @@ static void airo_release(struct pcmcia_device *link);
static void airo_detach(struct pcmcia_device *p_dev);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'pcmem_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
-/*
- A linked list of "instances" of the aironet device. Each actual
- PCMCIA card corresponds to one device instance, and is described
- by one struct pcmcia_device structure (defined in ds.h).
-
- You may not want to use a linked list for this -- for example, the
- memory card driver uses an array of struct pcmcia_device pointers,
- where minor device numbers are used to derive the corresponding
- array index.
-*/
-
-/*
- A driver needs to provide a dev_node_t structure for each device
- on a card. In some cases, there is only one device per card (for
- example, ethernet cards, modems). In other cases, there may be
- many actual or logical devices (SCSI adapters, memory cards with
- multiple partitions). The dev_node_t structures need to be kept
- in a linked list starting at the 'dev' field of a struct pcmcia_device
- structure. We allocate them in the card's private data structure,
- because they generally shouldn't be allocated dynamically.
-
- In this case, we also provide a flag to indicate if a device is
- "stopped" due to a power management event, or card ejection. The
- device IO routines can use a flag like this to throttle IO to a
- card that is not ready to accept it.
-*/
-
typedef struct local_info_t {
- dev_node_t node;
struct net_device *eth_dev;
} local_info_t;
@@ -311,17 +276,9 @@ static int airo_config(struct pcmcia_device *link)
if (!((local_info_t *)link->priv)->eth_dev)
goto failed;
- /*
- At this point, the dev_node_t structure(s) need to be
- initialized and arranged in a linked list at link->dev_node.
- */
- strcpy(dev->node.dev_name, ((local_info_t *)link->priv)->eth_dev->name);
- dev->node.major = dev->node.minor = 0;
- link->dev_node = &dev->node;
-
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x: ",
- dev->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x: ",
+ link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq);
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index a712788..58cb73c 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -47,7 +47,6 @@ static const char driver_name[DEV_NAME_LEN] = "sl811_cs";
typedef struct local_info_t {
struct pcmcia_device *p_dev;
- dev_node_t node;
} local_info_t;
static void sl811_cs_release(struct pcmcia_device * link);
@@ -185,7 +184,6 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
static int sl811_cs_config(struct pcmcia_device *link)
{
struct device *parent = &link->dev;
- local_info_t *dev = link->priv;
int ret;
dev_dbg(&link->dev, "sl811_cs_config\n");
@@ -204,12 +202,8 @@ static int sl811_cs_config(struct pcmcia_device *link)
if (ret)
goto failed;
- sprintf(dev->node.dev_name, driver_name);
- dev->node.major = dev->node.minor = 0;
- link->dev_node = &dev->node;
-
- printk(KERN_INFO "%s: index 0x%02x: ",
- dev->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x: ",
+ link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq);
--
1.6.3.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 09/29] pcmcia: dev_node removal (drivers with unregister_netdev check)
[not found] <20100519064149.GA5755@comet.dominikbrodowski.net>
` (2 preceding siblings ...)
2010-05-19 6:42 ` [PATCH 08/29] pcmcia: dev_node removal (drivers with updated printk call) Dominik Brodowski
@ 2010-05-19 6:42 ` Dominik Brodowski
3 siblings, 0 replies; 4+ messages in thread
From: Dominik Brodowski @ 2010-05-19 6:42 UTC (permalink / raw)
To: linux-pcmcia; +Cc: netdev, linux-wireless, Dominik Brodowski
As a third step, remove any usage of dev_node_t from drivers which
only wrote to this typedef/struct, except to determine whether
register_netdev() succeeded previously. However, the function calling
unregister_netdev() was only ever called by the PCMCIA core if
register_netdev() succeeded previously. The lonely exception was
easily fixed.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/net/pcmcia/3c574_cs.c | 8 +------
drivers/net/pcmcia/3c589_cs.c | 9 +-------
drivers/net/pcmcia/axnet_cs.c | 8 +------
drivers/net/pcmcia/com20020_cs.c | 21 ++++++-------------
drivers/net/pcmcia/fmvj18x_cs.c | 8 +------
drivers/net/pcmcia/ibmtr_cs.c | 8 +------
drivers/net/pcmcia/nmclan_cs.c | 8 +------
drivers/net/pcmcia/pcnet_cs.c | 8 +------
drivers/net/pcmcia/smc91c92_cs.c | 9 +-------
drivers/net/pcmcia/xirc2ps_cs.c | 29 +---------------------------
drivers/net/wireless/orinoco/orinoco_cs.c | 14 +------------
drivers/net/wireless/orinoco/spectrum_cs.c | 14 +------------
drivers/net/wireless/ray_cs.c | 6 +----
drivers/net/wireless/ray_cs.h | 1 -
drivers/net/wireless/wl3501.h | 1 -
drivers/net/wireless/wl3501_cs.c | 15 ++-----------
16 files changed, 22 insertions(+), 145 deletions(-)
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 1442831..774e41c 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -200,7 +200,6 @@ enum Window4 { /* Window 4: Xcvr/media bits. */
struct el3_private {
struct pcmcia_device *p_dev;
- dev_node_t node;
u16 advertising, partner; /* NWay media advertisement */
unsigned char phys; /* MII device address */
unsigned int autoselect:1, default_media:3; /* Read from the EEPROM/Wn3_Config. */
@@ -309,8 +308,7 @@ static void tc574_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "3c574_detach()\n");
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
tc574_release(link);
@@ -444,17 +442,13 @@ static int tc574_config(struct pcmcia_device *link)
}
}
- link->dev_node = &lp->node;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
- link->dev_node = NULL;
goto failed;
}
- strcpy(lp->node.dev_name, dev->name);
-
printk(KERN_INFO "%s: %s at io %#3lx, irq %d, "
"hw_addr %pM.\n",
dev->name, cardname, dev->base_addr, dev->irq,
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 405d772..5ab589d 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -106,7 +106,6 @@ enum RxFilter {
struct el3_private {
struct pcmcia_device *p_dev;
- dev_node_t node;
/* For transceiver monitoring */
struct timer_list media;
u16 media_status;
@@ -222,8 +221,7 @@ static void tc589_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "3c589_detach\n");
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
tc589_release(link);
@@ -241,7 +239,6 @@ static void tc589_detach(struct pcmcia_device *link)
static int tc589_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- struct el3_private *lp = netdev_priv(dev);
__be16 *phys_addr;
int ret, i, j, multi = 0, fifo;
unsigned int ioaddr;
@@ -312,17 +309,13 @@ static int tc589_config(struct pcmcia_device *link)
else
printk(KERN_ERR "3c589_cs: invalid if_port requested\n");
- link->dev_node = &lp->node;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk(KERN_ERR "3c589_cs: register_netdev() failed\n");
- link->dev_node = NULL;
goto failed;
}
- strcpy(lp->node.dev_name, dev->name);
-
printk(KERN_INFO "%s: 3Com 3c%s, io %#3lx, irq %d, "
"hw_addr %pM\n",
dev->name, (multi ? "562" : "589"), dev->base_addr, dev->irq,
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 967547a..59f6fa3 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -113,7 +113,6 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id);
typedef struct axnet_dev_t {
struct pcmcia_device *p_dev;
- dev_node_t node;
caddr_t base;
struct timer_list watchdog;
int stale, fast_poll;
@@ -194,8 +193,7 @@ static void axnet_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "axnet_detach(0x%p)\n", link);
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
axnet_release(link);
@@ -392,17 +390,13 @@ static int axnet_config(struct pcmcia_device *link)
}
info->phy_id = (i < 32) ? i : -1;
- link->dev_node = &info->node;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n");
- link->dev_node = NULL;
goto failed;
}
- strcpy(info->node.dev_name, dev->name);
-
printk(KERN_INFO "%s: Asix AX88%d90: io %#3lx, irq %d, "
"hw_addr %pM\n",
dev->name, ((info->flags & IS_AX88790) ? 7 : 1),
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 278438b..5643f94 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -122,7 +122,6 @@ static void com20020_detach(struct pcmcia_device *p_dev);
typedef struct com20020_dev_t {
struct net_device *dev;
- dev_node_t node;
} com20020_dev_t;
/*======================================================================
@@ -195,18 +194,16 @@ static void com20020_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "com20020_detach\n");
- if (link->dev_node) {
- dev_dbg(&link->dev, "unregister...\n");
+ dev_dbg(&link->dev, "unregister...\n");
- unregister_netdev(dev);
+ unregister_netdev(dev);
- /*
- * this is necessary because we register our IRQ separately
- * from card services.
- */
- if (dev->irq)
+ /*
+ * this is necessary because we register our IRQ separately
+ * from card services.
+ */
+ if (dev->irq)
free_irq(dev->irq, dev);
- }
com20020_release(link);
@@ -297,7 +294,6 @@ static int com20020_config(struct pcmcia_device *link)
lp->card_name = "PCMCIA COM20020";
lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
- link->dev_node = &info->node;
SET_NETDEV_DEV(dev, &link->dev);
i = com20020_found(dev, 0); /* calls register_netdev */
@@ -305,12 +301,9 @@ static int com20020_config(struct pcmcia_device *link)
if (i != 0) {
dev_printk(KERN_NOTICE, &link->dev,
"com20020_cs: com20020_found() failed\n");
- link->dev_node = NULL;
goto failed;
}
- strcpy(info->node.dev_name, dev->name);
-
dev_dbg(&link->dev,KERN_INFO "%s: port %#3lx, irq %d\n",
dev->name, dev->base_addr, dev->irq);
return 0;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 31f1a03..6580d78 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -110,7 +110,6 @@ typedef enum { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
*/
typedef struct local_info_t {
struct pcmcia_device *p_dev;
- dev_node_t node;
long open_time;
uint tx_started:1;
uint tx_queue;
@@ -274,8 +273,7 @@ static void fmvj18x_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "fmvj18x_detach\n");
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
fmvj18x_release(link);
@@ -523,17 +521,13 @@ static int fmvj18x_config(struct pcmcia_device *link)
}
lp->cardtype = cardtype;
- link->dev_node = &lp->node;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
- link->dev_node = NULL;
goto failed;
}
- strcpy(lp->node.dev_name, dev->name);
-
/* print current configuration */
printk(KERN_INFO "%s: %s, sram %s, port %#3lx, irq %d, "
"hw_addr %pM\n",
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 0225cdf..2e42d80 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -104,7 +104,6 @@ static void ibmtr_detach(struct pcmcia_device *p_dev);
typedef struct ibmtr_dev_t {
struct pcmcia_device *p_dev;
struct net_device *dev;
- dev_node_t node;
window_handle_t sram_win_handle;
struct tok_info *ti;
} ibmtr_dev_t;
@@ -190,8 +189,7 @@ static void ibmtr_detach(struct pcmcia_device *link)
*/
ti->sram_phys |= 1;
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
del_timer_sync(&(ti->tr_timer));
@@ -289,18 +287,14 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
Adapters Technical Reference" SC30-3585 for this info. */
ibmtr_hw_setup(dev, mmiobase);
- link->dev_node = &info->node;
SET_NETDEV_DEV(dev, &link->dev);
i = ibmtr_probe_card(dev);
if (i != 0) {
printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n");
- link->dev_node = NULL;
goto failed;
}
- strcpy(info->node.dev_name, dev->name);
-
printk(KERN_INFO
"%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
dev->name, dev->base_addr, dev->irq,
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index b779e3a..d8a3b3c 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -363,7 +363,6 @@ typedef struct _mace_statistics {
typedef struct _mace_private {
struct pcmcia_device *p_dev;
- dev_node_t node;
struct net_device_stats linux_stats; /* Linux statistics counters */
mace_statistics mace_stats; /* MACE chip statistics counters */
@@ -491,8 +490,7 @@ static void nmclan_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "nmclan_detach\n");
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
nmclan_release(link);
@@ -696,18 +694,14 @@ static int nmclan_config(struct pcmcia_device *link)
else
printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n");
- link->dev_node = &lp->node;
SET_NETDEV_DEV(dev, &link->dev);
i = register_netdev(dev);
if (i != 0) {
printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n");
- link->dev_node = NULL;
goto failed;
}
- strcpy(lp->node.dev_name, dev->name);
-
printk(KERN_INFO "%s: nmclan: port %#3lx, irq %d, %s port,"
" hw_addr %pM\n",
dev->name, dev->base_addr, dev->irq, if_names[dev->if_port],
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index af09be4..6f77a76 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -208,7 +208,6 @@ static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII };
typedef struct pcnet_dev_t {
struct pcmcia_device *p_dev;
- dev_node_t node;
u_int flags;
void __iomem *base;
struct timer_list watchdog;
@@ -287,8 +286,7 @@ static void pcnet_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "pcnet_detach\n");
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
pcnet_release(link);
@@ -639,17 +637,13 @@ static int pcnet_config(struct pcmcia_device *link)
if (info->flags & (IS_DL10019|IS_DL10022))
mii_phy_probe(dev);
- link->dev_node = &info->node;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n");
- link->dev_node = NULL;
goto failed;
}
- strcpy(info->node.dev_name, dev->name);
-
if (info->flags & (IS_DL10019|IS_DL10022)) {
u_char id = inb(dev->base_addr + 0x1a);
printk(KERN_INFO "%s: NE2000 (DL100%d rev %02x): ",
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index ad061c7..59796e7 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -103,7 +103,6 @@ struct smc_private {
u_short manfid;
u_short cardid;
- dev_node_t node;
struct sk_buff *saved_skb;
int packets_waiting;
void __iomem *base;
@@ -323,7 +322,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
return -ENOMEM;
smc = netdev_priv(dev);
smc->p_dev = link;
- link->priv = dev;
spin_lock_init(&smc->lock);
link->io.NumPorts1 = 16;
@@ -361,8 +359,7 @@ static void smc91c92_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "smc91c92_detach\n");
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
smc91c92_release(link);
@@ -956,17 +953,13 @@ static int smc91c92_config(struct pcmcia_device *link)
SMC_SELECT_BANK(0);
}
- link->dev_node = &smc->node;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
- link->dev_node = NULL;
goto config_undo;
}
- strcpy(smc->node.dev_name, dev->name);
-
printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
"hw_addr %pM\n",
dev->name, name, (rev & 0x0f), dev->base_addr, dev->irq,
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index c9e7d7d..5e6b62b 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -297,31 +297,9 @@ static void xirc2ps_detach(struct pcmcia_device *p_dev);
static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
-/****************
- * A linked list of "instances" of the device. Each actual
- * PCMCIA card corresponds to one device instance, and is described
- * by one struct pcmcia_device structure (defined in ds.h).
- *
- * You may not want to use a linked list for this -- for example, the
- * memory card driver uses an array of struct pcmcia_device pointers, where minor
- * device numbers are used to derive the corresponding array index.
- */
-
-/****************
- * A driver needs to provide a dev_node_t structure for each device
- * on a card. In some cases, there is only one device per card (for
- * example, ethernet cards, modems). In other cases, there may be
- * many actual or logical devices (SCSI adapters, memory cards with
- * multiple partitions). The dev_node_t structures need to be kept
- * in a linked list starting at the 'dev' field of a struct pcmcia_device
- * structure. We allocate them in the card's private data structure,
- * because they generally can't be allocated dynamically.
- */
-
typedef struct local_info_t {
struct net_device *dev;
struct pcmcia_device *p_dev;
- dev_node_t node;
int card_type;
int probe_port;
@@ -579,8 +557,7 @@ xirc2ps_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "detach\n");
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
xirc2ps_release(link);
@@ -985,17 +962,13 @@ xirc2ps_config(struct pcmcia_device * link)
if (local->dingo)
do_reset(dev, 1); /* a kludge to make the cem56 work */
- link->dev_node = &local->node;
SET_NETDEV_DEV(dev, &link->dev);
if ((err=register_netdev(dev))) {
printk(KNOT_XIRC "register_netdev() failed\n");
- link->dev_node = NULL;
goto config_error;
}
- strcpy(local->node.dev_name, dev->name);
-
/* give some infos about the hardware */
printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 5d29b11..03056ab 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -50,7 +50,6 @@ MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket
* struct orinoco_private */
struct orinoco_pccard {
struct pcmcia_device *p_dev;
- dev_node_t node;
/* Used to handle hard reset */
/* yuck, we need this hack to work around the insanity of the
@@ -140,8 +139,7 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
- if (link->dev_node)
- orinoco_if_del(priv);
+ orinoco_if_del(priv);
orinoco_cs_release(link);
@@ -226,7 +224,6 @@ static int
orinoco_cs_config(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
- struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int ret;
void __iomem *mem;
@@ -276,9 +273,6 @@ orinoco_cs_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /* Ok, we have the configuration, prepare to register the netdev */
- card->node.major = card->node.minor = 0;
-
/* Initialise the main driver */
if (orinoco_init(priv) != 0) {
printk(KERN_ERR PFX "orinoco_init() failed\n");
@@ -292,12 +286,6 @@ orinoco_cs_config(struct pcmcia_device *link)
goto failed;
}
- /* At this point, the dev_node_t structure(s) needs to be
- * initialized and arranged in a linked list at link->dev_node. */
- strcpy(card->node.dev_name, priv->ndev->name);
- link->dev_node = &card->node; /* link->dev_node being non-NULL is also
- * used to indicate that the
- * net_device has been registered */
return 0;
failed:
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 7a8e056..41b9ce4 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -57,7 +57,6 @@ MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket
* struct orinoco_private */
struct orinoco_pccard {
struct pcmcia_device *p_dev;
- dev_node_t node;
};
/********************************************************************/
@@ -214,8 +213,7 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
- if (link->dev_node)
- orinoco_if_del(priv);
+ orinoco_if_del(priv);
spectrum_cs_release(link);
@@ -300,7 +298,6 @@ static int
spectrum_cs_config(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
- struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int ret;
void __iomem *mem;
@@ -350,9 +347,6 @@ spectrum_cs_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /* Ok, we have the configuration, prepare to register the netdev */
- card->node.major = card->node.minor = 0;
-
/* Reset card */
if (spectrum_cs_hard_reset(priv) != 0)
goto failed;
@@ -370,12 +364,6 @@ spectrum_cs_config(struct pcmcia_device *link)
goto failed;
}
- /* At this point, the dev_node_t structure(s) needs to be
- * initialized and arranged in a linked list at link->dev_node. */
- strcpy(card->node.dev_name, priv->ndev->name);
- link->dev_node = &card->node; /* link->dev_node being non-NULL is also
- * used to indicate that the
- * net_device has been registered */
return 0;
failed:
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index fe4642a..18a93f1 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -379,8 +379,7 @@ static void ray_detach(struct pcmcia_device *link)
del_timer(&local->timer);
if (link->priv) {
- if (link->dev_node)
- unregister_netdev(dev);
+ unregister_netdev(dev);
free_netdev(dev);
}
dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
@@ -489,9 +488,6 @@ static int ray_config(struct pcmcia_device *link)
return i;
}
- strcpy(local->node.dev_name, dev->name);
- link->dev_node = &local->node;
-
printk(KERN_INFO "%s: RayLink, irq %d, hw_addr %pM\n",
dev->name, dev->irq, dev->dev_addr);
diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h
index 1e23b7f..9f01ddb 100644
--- a/drivers/net/wireless/ray_cs.h
+++ b/drivers/net/wireless/ray_cs.h
@@ -25,7 +25,6 @@ struct beacon_rx {
typedef struct ray_dev_t {
int card_status;
int authentication_state;
- dev_node_t node;
window_handle_t amem_handle; /* handle to window for attribute memory */
window_handle_t rmem_handle; /* handle to window for rx buffer on card */
void __iomem *sram; /* pointer to beginning of shared RAM */
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index 8bce1a5..8816e37 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -610,7 +610,6 @@ struct wl3501_card {
struct iw_statistics wstats;
struct iw_spy_data spy_data;
struct iw_public_data wireless_data;
- struct dev_node_t node;
struct pcmcia_device *p_dev;
};
#endif
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index c43f05b..5e5d24c 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1451,6 +1451,8 @@ static void wl3501_detach(struct pcmcia_device *link)
netif_device_detach(dev);
wl3501_release(link);
+ unregister_netdev(dev);
+
if (link->priv)
free_netdev(link->priv);
@@ -1977,20 +1979,15 @@ static int wl3501_config(struct pcmcia_device *link)
}
this = netdev_priv(dev);
- /*
- * At this point, the dev_node_t structure(s) should be initialized and
- * arranged in a linked list at link->dev_node.
- */
- link->dev_node = &this->node;
this->base_addr = dev->base_addr;
if (!wl3501_get_flash_mac_addr(this)) {
printk(KERN_WARNING "%s: Cant read MAC addr in flash ROM?\n",
dev->name);
+ unregister_netdev(dev);
goto failed;
}
- strcpy(this->node.dev_name, dev->name);
for (i = 0; i < 6; i++)
dev->dev_addr[i] = ((char *)&this->mac_addr)[i];
@@ -2034,12 +2031,6 @@ failed:
*/
static void wl3501_release(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
-
- /* Unlink the device chain */
- if (link->dev_node)
- unregister_netdev(dev);
-
pcmcia_disable_device(link);
}
--
1.6.3.3
^ permalink raw reply related [flat|nested] 4+ messages in thread