* [PATCH net 08/10] bnx2x: Fix BCM54618se invalid link indication
@ 2011-08-03 9:00 Yaniv Rosner
0 siblings, 0 replies; only message in thread
From: Yaniv Rosner @ 2011-08-03 9:00 UTC (permalink / raw)
To: davem; +Cc: eilong, netdev
After resetting BCM54618se, link partner would still see link since the PHY wasn't put into low-power state.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x_link.c | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index cf8b8d1..5e6f351 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -10219,8 +10219,15 @@ static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
u32 cfg_pin;
u8 port;
- /* This works with E3 only, no need to check the chip
- before determining the port. */
+ /*
+ * In case of no EPIO routed to reset the GPHY, put it
+ * in low power mode.
+ */
+ bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800);
+ /*
+ * This works with E3 only, no need to check the chip
+ * before determining the port.
+ */
port = params->port;
cfg_pin = (REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region,
--
1.7.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2011-08-03 9:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-03 9:00 [PATCH net 08/10] bnx2x: Fix BCM54618se invalid link indication Yaniv Rosner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).