* [PATCH net 09/10] bnx2x: Fix BCM578xx MAC test
@ 2011-08-03 9:00 Yaniv Rosner
0 siblings, 0 replies; only message in thread
From: Yaniv Rosner @ 2011-08-03 9:00 UTC (permalink / raw)
To: davem; +Cc: eilong, netdev
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x_link.c | 9 ++++-----
1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 5e6f351..01fb92c 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -11541,13 +11541,12 @@ void bnx2x_init_xmac_loopback(struct link_params *params,
* Set WC to loopback mode since link is required to provide clock
* to the XMAC in 20G mode
*/
- if (vars->line_speed == SPEED_20000) {
- bnx2x_set_aer_mmd(params, ¶ms->phy[0]);
- bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0);
- params->phy[INT_PHY].config_loopback(
+ bnx2x_set_aer_mmd(params, ¶ms->phy[0]);
+ bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0);
+ params->phy[INT_PHY].config_loopback(
¶ms->phy[INT_PHY],
params);
- }
+
bnx2x_xmac_enable(params, vars, 1);
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
}
--
1.7.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2011-08-03 9:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-03 9:00 [PATCH net 09/10] bnx2x: Fix BCM578xx MAC test Yaniv Rosner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).