[PATCH V1 0/6] net/mlx4_en: DCB QoS support

[PATCH V1 0/6] net/mlx4_en: DCB QoS support

[Amir Vadai]

DCBX version 802.1qaz is supported.
User Priority (UP) is set in QP context instead of in WQE (QP Work Queue
Element), which means that all traffic from a queue will have the same UP.
UP is also set for untagged traffic to be able to classify such traffic too.

Mapping from sk_prio to User Priority is done by sch_mqprio mapping. Although
confusingly sch_mqprio maps sk_prio to something called TC, it is not related
to DCBX's TC, and is interpreted by mlx4_en driver as UP.

The Current HW based QoS mechanism which was introduced in commit 4f57c087de9
"net: implement mechanism for HW based QOS" is in orientation to ETS traffic
class. Patch 7/8 introduces an approach which allow to use this mechanism also
with hardware who has queues per user priority (UP). After the change,
__skb_tx_hash() will direct a flow to a tx ring from a range of tx rings. This
range is defined by the caller function by the specific HW. If TC based queues,
the range is by TC number and for UP based queues, the range is by UP. 

---
Changes from V0:
- Removed patches 6 and 7 who deal with the interaction between the kernel HW
  QoS constructs to the queue selection logic are still under discussion with
  John and some changes might be needed there.

Amir Vadai (6):
  net/mlx4_en: Force user priority by QP attribute
  net/mlx4_core: set port QoS attributes
  net/mlx4_en: DCB QoS support
  net/mlx4_en: Set max rate-limit for a TC
  net/mlx4_en: sk_prio <=> UP for untagged traffic
  IB/rdma_cm: TOS <=> UP mapping for IBoE

 drivers/infiniband/core/cma.c                     |   35 ++++-
 drivers/net/ethernet/mellanox/mlx4/Kconfig        |   12 ++
 drivers/net/ethernet/mellanox/mlx4/Makefile       |    1 +
 drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c    |  215 +++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/en_main.c      |    2 +-
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c    |   47 +++++-
 drivers/net/ethernet/mellanox/mlx4/en_port.h      |    2 +
 drivers/net/ethernet/mellanox/mlx4/en_resources.c |    6 +-
 drivers/net/ethernet/mellanox/mlx4/en_rx.c        |    4 +-
 drivers/net/ethernet/mellanox/mlx4/en_sysfs.c     |  120 ++++++++++++
 drivers/net/ethernet/mellanox/mlx4/en_tx.c        |   23 +--
 drivers/net/ethernet/mellanox/mlx4/mlx4.h         |   20 ++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h      |   32 +++-
 drivers/net/ethernet/mellanox/mlx4/port.c         |   62 ++++++
 include/linux/mlx4/cmd.h                          |    4 +
 include/linux/mlx4/device.h                       |    3 +
 include/linux/mlx4/qp.h                           |    3 +-
 17 files changed, 569 insertions(+), 22 deletions(-)
 create mode 100644 drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
 create mode 100644 drivers/net/ethernet/mellanox/mlx4/en_sysfs.c

-- 
1.7.8.2

[PATCH V1 1/6] net/mlx4_en: Force user priority by QP attribute

[Amir Vadai]

From: Amir Vadai <amirv@mellanox.co.il>

Instead of relying on HW to change schedule queue by UP, schedule
queue is fixed for a tx_ring, and UP in WQE is ignored in this aspect.  This
resolves two issues with untagged traffic:
1. untagged traffic has no UP in packet which is needed for QoS. The change
   above allows setting the schedule queue (and by that the UP) of such a stream.
2. BlueFlame uses the same field used by vlan tag. So forcing UP from QPC
   allows using BF for untagged but prioritized traffic.

In old firmware that force UP is not supported, untagged traffic will not subject to
QoS.

Because UP is set by QP, need to always have a tx ring per UP, even if pfcrx
module paramter is false.

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_main.c      |    2 +-
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c    |    3 ++-
 drivers/net/ethernet/mellanox/mlx4/en_resources.c |    6 +++++-
 drivers/net/ethernet/mellanox/mlx4/en_rx.c        |    4 ++--
 drivers/net/ethernet/mellanox/mlx4/en_tx.c        |    9 ++++-----
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h      |    6 +++---
 include/linux/mlx4/qp.h                           |    3 ++-
 7 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index 2097a7d..346fdb2 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -114,7 +114,7 @@ static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
 		params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
 		params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
 		params->prof[i].tx_ring_num = MLX4_EN_NUM_TX_RINGS +
-			(!!pfcrx) * MLX4_EN_NUM_PPP_RINGS;
+			MLX4_EN_NUM_PPP_RINGS;
 		params->prof[i].rss_rings = 0;
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 31b455a..2322622 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -650,7 +650,8 @@ int mlx4_en_start_port(struct net_device *dev)
 
 		/* Configure ring */
 		tx_ring = &priv->tx_ring[i];
-		err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn);
+		err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn,
+				max(0, i - MLX4_EN_NUM_TX_RINGS));
 		if (err) {
 			en_err(priv, "Failed allocating Tx ring\n");
 			mlx4_en_deactivate_cq(priv, cq);
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_resources.c b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
index bcbc54c..10c24c7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_resources.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_resources.c
@@ -39,7 +39,7 @@
 
 void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
 			     int is_tx, int rss, int qpn, int cqn,
-			     struct mlx4_qp_context *context)
+			     int user_prio, struct mlx4_qp_context *context)
 {
 	struct mlx4_en_dev *mdev = priv->mdev;
 
@@ -57,6 +57,10 @@ void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
 	context->local_qpn = cpu_to_be32(qpn);
 	context->pri_path.ackto = 1 & 0x07;
 	context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6;
+	if (user_prio >= 0) {
+		context->pri_path.sched_queue |= user_prio << 3;
+		context->pri_path.feup = 1 << 6;
+	}
 	context->pri_path.counter_index = 0xff;
 	context->cqn_send = cpu_to_be32(cqn);
 	context->cqn_recv = cpu_to_be32(cqn);
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index 9adbd53..d49a7ac 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -823,7 +823,7 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, int qpn,
 
 	memset(context, 0, sizeof *context);
 	mlx4_en_fill_qp_context(priv, ring->actual_size, ring->stride, 0, 0,
-				qpn, ring->cqn, context);
+				qpn, ring->cqn, -1, context);
 	context->db_rec_addr = cpu_to_be64(ring->wqres.db.dma);
 
 	/* Cancel FCS removal if FW allows */
@@ -890,7 +890,7 @@ int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv)
 	}
 	rss_map->indir_qp.event = mlx4_en_sqp_event;
 	mlx4_en_fill_qp_context(priv, 0, 0, 0, 1, priv->base_qpn,
-				priv->rx_ring[0].cqn, &context);
+				priv->rx_ring[0].cqn, -1, &context);
 
 	if (!priv->prof->rss_rings || priv->prof->rss_rings > priv->rx_ring_num)
 		rss_rings = priv->rx_ring_num;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 1796824..445a771 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -156,7 +156,7 @@ void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv,
 
 int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
 			     struct mlx4_en_tx_ring *ring,
-			     int cq)
+			     int cq, int user_prio)
 {
 	struct mlx4_en_dev *mdev = priv->mdev;
 	int err;
@@ -174,7 +174,7 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
 	ring->doorbell_qpn = ring->qp.qpn << 8;
 
 	mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn,
-				ring->cqn, &ring->context);
+				ring->cqn, user_prio, &ring->context);
 	if (ring->bf_enabled)
 		ring->context.usr_page = cpu_to_be32(ring->bf.uar->index);
 
@@ -570,18 +570,17 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk
 
 u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
-	struct mlx4_en_priv *priv = netdev_priv(dev);
 	u16 vlan_tag = 0;
 
 	/* If we support per priority flow control and the packet contains
 	 * a vlan tag, send the packet to the TX ring assigned to that priority
 	 */
-	if (priv->prof->rx_ppp && vlan_tx_tag_present(skb)) {
+	if (vlan_tx_tag_present(skb)) {
 		vlan_tag = vlan_tx_tag_get(skb);
 		return MLX4_EN_NUM_TX_RINGS + (vlan_tag >> 13);
 	}
 
-	return skb_tx_hash(dev, skb);
+	return __skb_tx_hash(dev, skb, MLX4_EN_NUM_TX_RINGS);
 }
 
 static void mlx4_bf_copy(void __iomem *dst, unsigned long *src, unsigned bytecnt)
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 9e2b911..5bd7c2a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -521,7 +521,7 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ri
 void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring);
 int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
 			     struct mlx4_en_tx_ring *ring,
-			     int cq);
+			     int cq, int user_prio);
 void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv,
 				struct mlx4_en_tx_ring *ring);
 
@@ -539,8 +539,8 @@ int mlx4_en_process_rx_cq(struct net_device *dev,
 			  int budget);
 int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget);
 void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
-			     int is_tx, int rss, int qpn, int cqn,
-			     struct mlx4_qp_context *context);
+		int is_tx, int rss, int qpn, int cqn, int user_prio,
+		struct mlx4_qp_context *context);
 void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event);
 int mlx4_en_map_buffer(struct mlx4_buf *buf);
 void mlx4_en_unmap_buffer(struct mlx4_buf *buf);
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 091f9e7..96005d7 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -139,7 +139,8 @@ struct mlx4_qp_path {
 	u8			rgid[16];
 	u8			sched_queue;
 	u8			vlan_index;
-	u8			reserved3[2];
+	u8			feup;
+	u8			reserved3;
 	u8			reserved4[2];
 	u8			dmac[6];
 };
-- 
1.7.8.2

[PATCH V1 2/6] net/mlx4_core: set port QoS attributes

[Amir Vadai]

From: Amir Vadai <amirv@mellanox.co.il>

Adding QoS firmware commands:
- mlx4_en_SET_PORT_PRIO2TC - set UP <=> TC
- mlx4_en_SET_PORT_SCHEDULER - set promised BW, max BW and PG number

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
---
 drivers/net/ethernet/mellanox/mlx4/en_port.h |    2 +
 drivers/net/ethernet/mellanox/mlx4/mlx4.h    |   20 ++++++++
 drivers/net/ethernet/mellanox/mlx4/port.c    |   62 ++++++++++++++++++++++++++
 include/linux/mlx4/cmd.h                     |    4 ++
 include/linux/mlx4/device.h                  |    3 +
 5 files changed, 91 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.h b/drivers/net/ethernet/mellanox/mlx4/en_port.h
index 6934fd7..745090b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_port.h
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.h
@@ -39,6 +39,8 @@
 #define SET_PORT_PROMISC_SHIFT	31
 #define SET_PORT_MC_PROMISC_SHIFT	30
 
+#define MLX4_EN_NUM_TC		8
+
 #define VLAN_FLTR_SIZE	128
 struct mlx4_set_vlan_fltr_mbox {
 	__be32 entry[VLAN_FLTR_SIZE];
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index 5da51b9..33bf39d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -53,6 +53,26 @@
 #define DRV_VERSION	"1.1"
 #define DRV_RELDATE	"Dec, 2011"
 
+#define MLX4_NUM_UP		8
+#define MLX4_NUM_TC		8
+#define MLX4_RATELIMIT_UNITS 3 /* 100 Mbps */
+#define MLX4_RATELIMIT_DEFAULT 0xffff
+
+struct mlx4_set_port_prio2tc_context {
+	u8 prio2tc[4];
+};
+
+struct mlx4_port_scheduler_tc_cfg_be {
+	__be16 pg;
+	__be16 bw_precentage;
+	__be16 max_bw_units; /* 3-100Mbps, 4-1Gbps, other values - reserved */
+	__be16 max_bw_value;
+};
+
+struct mlx4_set_port_scheduler_context {
+	struct mlx4_port_scheduler_tc_cfg_be tc[MLX4_NUM_TC];
+};
+
 enum {
 	MLX4_HCR_BASE		= 0x80680,
 	MLX4_HCR_SIZE		= 0x0001c,
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index 98e7762..762bbda 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -858,6 +858,68 @@ int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
 }
 EXPORT_SYMBOL(mlx4_SET_PORT_qpn_calc);
 
+int mlx4_SET_PORT_PRIO2TC(struct mlx4_dev *dev, u8 port, u8 *prio2tc)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	struct mlx4_set_port_prio2tc_context *context;
+	int err;
+	u32 in_mod;
+	int i;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+	context = mailbox->buf;
+	memset(context, 0, sizeof *context);
+
+	for (i = 0; i < MLX4_NUM_UP; i += 2)
+		context->prio2tc[i >> 1] = prio2tc[i] << 4 | prio2tc[i + 1];
+
+	in_mod = MLX4_SET_PORT_PRIO2TC << 8 | port;
+	err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT,
+		       MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+EXPORT_SYMBOL(mlx4_SET_PORT_PRIO2TC);
+
+int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, u8 port, u8 *tc_tx_bw,
+		u8 *pg, u16 *ratelimit)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	struct mlx4_set_port_scheduler_context *context;
+	int err;
+	u32 in_mod;
+	int i;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+	context = mailbox->buf;
+	memset(context, 0, sizeof *context);
+
+	for (i = 0; i < MLX4_NUM_TC; i++) {
+		struct mlx4_port_scheduler_tc_cfg_be *tc = &context->tc[i];
+		u16 r = ratelimit && ratelimit[i] ? ratelimit[i] :
+			MLX4_RATELIMIT_DEFAULT;
+
+		tc->pg = htons(pg[i]);
+		tc->bw_precentage = htons(tc_tx_bw[i]);
+
+		tc->max_bw_units = htons(MLX4_RATELIMIT_UNITS);
+		tc->max_bw_value = htons(r);
+	}
+
+	in_mod = MLX4_SET_PORT_SCHEDULER << 8 | port;
+	err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT,
+		       MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+EXPORT_SYMBOL(mlx4_SET_PORT_SCHEDULER);
+
 int mlx4_SET_MCAST_FLTR_wrapper(struct mlx4_dev *dev, int slave,
 				struct mlx4_vhcr *vhcr,
 				struct mlx4_cmd_mailbox *inbox,
diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h
index 9958ff2..1f3860a 100644
--- a/include/linux/mlx4/cmd.h
+++ b/include/linux/mlx4/cmd.h
@@ -150,6 +150,10 @@ enum {
 	/* statistics commands */
 	MLX4_CMD_QUERY_IF_STAT	 = 0X54,
 	MLX4_CMD_SET_IF_STAT	 = 0X55,
+
+	/* set port opcode modifiers */
+	MLX4_SET_PORT_PRIO2TC = 0x8,
+	MLX4_SET_PORT_SCHEDULER  = 0x9,
 };
 
 enum {
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 44d8144..20c706f 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -626,6 +626,9 @@ int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu,
 			  u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx);
 int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
 			   u8 promisc);
+int mlx4_SET_PORT_PRIO2TC(struct mlx4_dev *dev, u8 port, u8 *prio2tc);
+int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, u8 port, u8 *tc_tx_bw,
+		u8 *pg, u16 *ratelimit);
 int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx);
 int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index);
 void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index);
-- 
1.7.8.2

[PATCH V1 3/6] net/mlx4_en: DCB QoS support

[Amir Vadai]

From: Amir Vadai <amirv@mellanox.co.il>

Set TSA, promised BW and PFC using IEEE 802.1qaz netlink commands.

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
---
 drivers/net/ethernet/mellanox/mlx4/Kconfig     |   12 ++
 drivers/net/ethernet/mellanox/mlx4/Makefile    |    1 +
 drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c |  203 ++++++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c |   16 ++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   |   21 +++
 5 files changed, 253 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c

diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index 1bb9353..5f027f9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -11,6 +11,18 @@ config MLX4_EN
 	  This driver supports Mellanox Technologies ConnectX Ethernet
 	  devices.
 
+config MLX4_EN_DCB
+	bool "Data Center Bridging (DCB) Support"
+	default y
+	depends on MLX4_EN && DCB
+	---help---
+	  Say Y here if you want to use Data Center Bridging (DCB) in the
+	  driver.
+	  If set to N, will not be able to configure QoS and ratelimit attributes.
+	  This flag is depended on the kernel's DCB support.
+
+	  If unsure, set to Y
+
 config MLX4_CORE
 	tristate
 	depends on PCI
diff --git a/drivers/net/ethernet/mellanox/mlx4/Makefile b/drivers/net/ethernet/mellanox/mlx4/Makefile
index 4a40ab9..293127d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx4/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_MLX4_EN)               += mlx4_en.o
 
 mlx4_en-y := 	en_main.o en_tx.o en_rx.o en_ethtool.o en_port.o en_cq.o \
 		en_resources.o en_netdev.o en_selftest.o
+mlx4_en-$(CONFIG_MLX4_EN_DCB) += en_dcb_nl.o
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
new file mode 100644
index 0000000..24ca87c
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (c) 2011 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/dcbnl.h>
+
+#include "mlx4_en.h"
+
+static int mlx4_en_dcbnl_ieee_getets(struct net_device *dev,
+				   struct ieee_ets *ets)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct ieee_ets *my_ets = priv->mlx4_en_ieee_ets;
+
+	/* No IEEE PFC settings available */
+	if (!my_ets)
+		return -EINVAL;
+
+	ets->ets_cap = IEEE_8021QAZ_MAX_TCS;
+	ets->cbs = my_ets->cbs;
+	memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw));
+	memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa));
+	memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc));
+
+	return 0;
+}
+
+static int mlx4_en_ets_validate(struct mlx4_en_priv *priv, struct ieee_ets *ets)
+{
+	int i;
+	int total_ets_bw = 0;
+	int has_ets_tc = 0;
+
+	for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
+		if (ets->prio_tc[i] > MLX4_EN_NUM_UP) {
+			en_err(priv, "Bad priority in UP <=> TC mapping. "
+					"TC: %d, UP: %d\n", i, ets->prio_tc[i]);
+			return -EINVAL;
+		}
+
+		switch (ets->tc_tsa[i]) {
+		case IEEE_8021QAZ_TSA_STRICT:
+			break;
+		case IEEE_8021QAZ_TSA_ETS:
+			has_ets_tc = 1;
+			total_ets_bw += ets->tc_tx_bw[i];
+			break;
+		default:
+			en_err(priv, "TC[%d]: Not supported TSA: %d\n",
+					i, ets->tc_tsa[i]);
+			return -ENOTSUPP;
+		}
+	}
+
+	if (has_ets_tc && total_ets_bw != MLX4_EN_BW_MAX) {
+		en_err(priv, "Bad ETS BW sum: %d. Should be exactly 100%%\n",
+				total_ets_bw);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int
+mlx4_en_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int num_strict = 0;
+	int i, err;
+	__u8 tc_tx_bw[IEEE_8021QAZ_MAX_TCS] = { 0 };
+	__u8 pg[IEEE_8021QAZ_MAX_TCS] = { 0 };
+
+	if (ets) {
+		err = mlx4_en_ets_validate(priv, ets);
+		if (err)
+			return err;
+	} else
+		ets = priv->mlx4_en_ieee_ets;
+
+	/* higher TC means higher priority => lower pg */
+	for (i = IEEE_8021QAZ_MAX_TCS - 1; i >= 0; i--) {
+		switch (ets->tc_tsa[i]) {
+		case IEEE_8021QAZ_TSA_STRICT:
+			pg[i] = num_strict++;
+			tc_tx_bw[i] = MLX4_EN_BW_MAX;
+			break;
+		case IEEE_8021QAZ_TSA_ETS:
+			pg[i] = MLX4_EN_TC_ETS;
+			tc_tx_bw[i] = ets->tc_tx_bw[i] ?: MLX4_EN_BW_MIN;
+			break;
+		}
+	}
+
+	err = mlx4_SET_PORT_PRIO2TC(mdev->dev, priv->port, ets->prio_tc);
+	if (err)
+		return err;
+
+	err = mlx4_SET_PORT_SCHEDULER(mdev->dev, priv->port, tc_tx_bw, pg,
+			NULL);
+	if (err)
+		return err;
+
+	if (ets != priv->mlx4_en_ieee_ets)
+		memcpy(priv->mlx4_en_ieee_ets, ets,
+				sizeof(*priv->mlx4_en_ieee_ets));
+
+	return 0;
+}
+
+static int mlx4_en_dcbnl_ieee_getpfc(struct net_device *dev,
+		struct ieee_pfc *pfc)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+
+	pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS;
+	pfc->pfc_en = priv->prof->tx_ppp;
+
+	return 0;
+}
+
+static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev,
+		struct ieee_pfc *pfc)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	en_dbg(DRV, priv, "cap: 0x%x en: 0x%x mbc: 0x%x delay: %d\n",
+			pfc->pfc_cap,
+			pfc->pfc_en,
+			pfc->mbc,
+			pfc->delay);
+
+	priv->prof->rx_pause = priv->prof->tx_pause = !!pfc->pfc_en;
+	priv->prof->rx_ppp = priv->prof->tx_ppp = pfc->pfc_en;
+
+	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
+				    priv->rx_skb_size + ETH_FCS_LEN,
+				    priv->prof->tx_pause,
+				    priv->prof->tx_ppp,
+				    priv->prof->rx_pause,
+				    priv->prof->rx_ppp);
+	if (err)
+		en_err(priv, "Failed setting pause params\n");
+
+	return err;
+}
+
+static u8 mlx4_en_dcbnl_getdcbx(struct net_device *dev)
+{
+	return DCB_CAP_DCBX_VER_IEEE;
+}
+
+static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode)
+{
+	if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
+	    (mode & DCB_CAP_DCBX_VER_CEE) ||
+	    !(mode & DCB_CAP_DCBX_VER_IEEE) ||
+	    !(mode & DCB_CAP_DCBX_HOST))
+		return 1;
+
+	return 0;
+}
+
+const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops = {
+	.ieee_getets	= mlx4_en_dcbnl_ieee_getets,
+	.ieee_setets	= mlx4_en_dcbnl_ieee_setets,
+	.ieee_getpfc	= mlx4_en_dcbnl_ieee_getpfc,
+	.ieee_setpfc	= mlx4_en_dcbnl_ieee_setpfc,
+
+	.getdcbx	= mlx4_en_dcbnl_getdcbx,
+	.setdcbx	= mlx4_en_dcbnl_setdcbx,
+};
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 2322622..9b456ae 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -967,6 +967,11 @@ void mlx4_en_destroy_netdev(struct net_device *dev)
 	mutex_unlock(&mdev->state_lock);
 
 	mlx4_en_free_resources(priv);
+
+#ifdef CONFIG_MLX4_EN_DCB
+	vfree(priv->mlx4_en_ieee_ets);
+#endif
+
 	free_netdev(dev);
 }
 
@@ -1080,6 +1085,17 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
 	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
 	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
+#ifdef CONFIG_MLX4_EN_DCB
+	if (!mlx4_is_slave(priv->mdev->dev)) {
+		dev->dcbnl_ops = &mlx4_en_dcbnl_ops;
+
+		priv->mlx4_en_ieee_ets = vzalloc(sizeof(struct ieee_ets));
+		if (!priv->mlx4_en_ieee_ets) {
+			err = -ENOMEM;
+			goto out;
+		}
+	}
+#endif
 
 	/* Query for default mac and max mtu */
 	priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port];
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 5bd7c2a..fa09792 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -40,6 +40,9 @@
 #include <linux/mutex.h>
 #include <linux/netdevice.h>
 #include <linux/if_vlan.h>
+#ifdef CONFIG_MLX4_EN_DCB
+#include <linux/dcbnl.h>
+#endif
 
 #include <linux/mlx4/device.h>
 #include <linux/mlx4/qp.h>
@@ -110,6 +113,7 @@ enum {
 #define MLX4_EN_NUM_TX_RINGS		8
 #define MLX4_EN_NUM_PPP_RINGS		8
 #define MAX_TX_RINGS			(MLX4_EN_NUM_TX_RINGS + MLX4_EN_NUM_PPP_RINGS)
+#define MLX4_EN_NUM_UP			8
 #define MLX4_EN_DEF_TX_RING_SIZE	512
 #define MLX4_EN_DEF_RX_RING_SIZE  	1024
 
@@ -410,6 +414,15 @@ struct mlx4_en_frag_info {
 
 };
 
+#ifdef CONFIG_MLX4_EN_DCB
+/* Minimal TC BW - setting to 0 will block traffic */
+#define MLX4_EN_BW_MIN 1
+#define MLX4_EN_BW_MAX 100 /* Utilize 100% of the line */
+
+#define MLX4_EN_TC_ETS 7
+
+#endif
+
 struct mlx4_en_priv {
 	struct mlx4_en_dev *mdev;
 	struct mlx4_en_port_profile *prof;
@@ -483,6 +496,10 @@ struct mlx4_en_priv {
 	int vids[128];
 	bool wol;
 	struct device *ddev;
+
+#ifdef CONFIG_MLX4_EN_DCB
+	struct ieee_ets *mlx4_en_ieee_ets;
+#endif
 };
 
 enum mlx4_en_wol {
@@ -557,6 +574,10 @@ int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, struct mlx4_en_priv *priv);
 int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset);
 int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port);
 
+#ifdef CONFIG_MLX4_EN_DCB
+extern const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops;
+#endif
+
 #define MLX4_EN_NUM_SELF_TEST	5
 void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf);
 u64 mlx4_en_mac_to_u64(u8 *addr);
-- 
1.7.8.2

[PATCH V1 4/6] net/mlx4_en: Set max rate-limit for a TC

[Amir Vadai]

From: Amir Vadai <amirv@mellanox.co.il>

Set max rate-limit using sysfs file /sys/class/net/<interface>/qos/ratelimit

To set, enter a space separated list of values in units of 100Mbps.  For
example to set ratelimit of 5G to TC0 and 10G for the reset on eth2 issue:
echo 50 100 100 100 100 100 100 100 100 > /sys/class/net/eth2/qos/ratelimit

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
---

We used sysfs since max bw isn't part of the ETS / DCBX NL support, and we're
open to other suggestions to add generic support for max bw, e.g add call to
the DCBX NL API.

 drivers/net/ethernet/mellanox/mlx4/Makefile    |    2 +-
 drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c |   14 +++-
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c |   13 +++
 drivers/net/ethernet/mellanox/mlx4/en_sysfs.c  |  120 ++++++++++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   |    5 +
 5 files changed, 152 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/ethernet/mellanox/mlx4/en_sysfs.c

diff --git a/drivers/net/ethernet/mellanox/mlx4/Makefile b/drivers/net/ethernet/mellanox/mlx4/Makefile
index 293127d..8e5bd88 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx4/Makefile
@@ -7,4 +7,4 @@ obj-$(CONFIG_MLX4_EN)               += mlx4_en.o
 
 mlx4_en-y := 	en_main.o en_tx.o en_rx.o en_ethtool.o en_port.o en_cq.o \
 		en_resources.o en_netdev.o en_selftest.o
-mlx4_en-$(CONFIG_MLX4_EN_DCB) += en_dcb_nl.o
+mlx4_en-$(CONFIG_MLX4_EN_DCB) += en_dcb_nl.o en_sysfs.o
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
index 24ca87c..eb0964f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
@@ -126,7 +126,7 @@ mlx4_en_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets)
 		return err;
 
 	err = mlx4_SET_PORT_SCHEDULER(mdev->dev, priv->port, tc_tx_bw, pg,
-			NULL);
+			priv->ratelimit);
 	if (err)
 		return err;
 
@@ -192,6 +192,18 @@ static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode)
 	return 0;
 }
 
+int mlx4_en_dcbnl_set_ratelimit(struct mlx4_en_priv *priv, u16 *ratelimit)
+{
+	memcpy(priv->ratelimit, ratelimit, sizeof(priv->ratelimit));
+
+	if (mlx4_en_dcbnl_ieee_setets(priv->dev, NULL)) {
+		en_err(priv, "Error setting ets in HW\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops = {
 	.ieee_getets	= mlx4_en_dcbnl_ieee_getets,
 	.ieee_setets	= mlx4_en_dcbnl_ieee_setets,
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 9b456ae..f45d544 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -810,6 +810,18 @@ static void mlx4_en_restart(struct work_struct *work)
 	mutex_unlock(&mdev->state_lock);
 }
 
+static int mlx4_en_init(struct net_device *dev)
+{
+#ifdef CONFIG_MLX4_EN_DCB
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+
+	if (!mlx4_is_slave(priv->mdev->dev))
+		mlx4_en_prepare_sysfs_group(priv);
+#endif
+
+	return 0;
+}
+
 static void mlx4_en_clear_stats(struct net_device *dev)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
@@ -1026,6 +1038,7 @@ static int mlx4_en_set_features(struct net_device *netdev,
 }
 
 static const struct net_device_ops mlx4_netdev_ops = {
+	.ndo_init		= mlx4_en_init,
 	.ndo_open		= mlx4_en_open,
 	.ndo_stop		= mlx4_en_close,
 	.ndo_start_xmit		= mlx4_en_xmit,
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_sysfs.c b/drivers/net/ethernet/mellanox/mlx4/en_sysfs.c
new file mode 100644
index 0000000..fdada20
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx4/en_sysfs.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2011 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/netdevice.h>
+
+#include "mlx4_en.h"
+
+#define to_en_priv(cd)	((struct mlx4_en_priv *)(netdev_priv(to_net_dev(cd))))
+
+static ssize_t mlx4_en_show_ratelimit(struct device *d,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct mlx4_en_priv *priv = to_en_priv(d);
+	int i;
+	int len = 0;
+
+	for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
+		len += sprintf(buf + len,  "%d ", priv->ratelimit[i]);
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static ssize_t mlx4_en_store_ratelimit(struct device *d,
+					  struct device_attribute *attr,
+					  const char *buf, size_t count)
+{
+	int ret = count;
+	struct mlx4_en_priv *priv = to_en_priv(d);
+	char save;
+	int i = 0;
+	u16 ratelimit[IEEE_8021QAZ_MAX_TCS] = { 0 };
+
+	do {
+		int len;
+		int new_value;
+
+		if (i >= IEEE_8021QAZ_MAX_TCS)
+			goto bad_elem_count;
+
+		len = strcspn(buf, " ");
+
+		/* nul-terminate and parse */
+		save = buf[len];
+		((char *)buf)[len] = '\0';
+
+		if (sscanf(buf, "%d", &new_value) != 1 ||
+				new_value > 100 || new_value < 0) {
+			en_err(priv, "bad ratelimit value: '%s'\n", buf);
+			ret = -EINVAL;
+			goto out;
+		}
+		ratelimit[i] = new_value;
+
+		buf += len+1;
+		i++;
+	} while (save == ' ');
+
+	if (i != IEEE_8021QAZ_MAX_TCS)
+		goto bad_elem_count;
+
+	mlx4_en_dcbnl_set_ratelimit(priv, &ratelimit[0]);
+
+out:
+	return ret;
+
+bad_elem_count:
+	en_err(priv, "bad number of elemets in ratelimit array\n");
+	return -EINVAL;
+}
+
+static DEVICE_ATTR(ratelimit, S_IRUGO | S_IWUSR,
+		   mlx4_en_show_ratelimit, mlx4_en_store_ratelimit);
+
+static struct attribute *mlx4_en_qos_attrs[] = {
+	&dev_attr_ratelimit.attr,
+	NULL,
+};
+
+static struct attribute_group qos_group = {
+	.name = "qos",
+	.attrs = mlx4_en_qos_attrs,
+};
+
+void mlx4_en_prepare_sysfs_group(struct mlx4_en_priv *priv)
+{
+	priv->dev->sysfs_groups[0] = &qos_group;
+}
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index fa09792..32b447d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -499,6 +499,7 @@ struct mlx4_en_priv {
 
 #ifdef CONFIG_MLX4_EN_DCB
 	struct ieee_ets *mlx4_en_ieee_ets;
+	u16 ratelimit[IEEE_8021QAZ_MAX_TCS];
 #endif
 };
 
@@ -576,6 +577,10 @@ int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port);
 
 #ifdef CONFIG_MLX4_EN_DCB
 extern const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops;
+
+void mlx4_en_prepare_sysfs_group(struct mlx4_en_priv *priv);
+
+int mlx4_en_dcbnl_set_ratelimit(struct mlx4_en_priv *priv, u16 *ratelimit);
 #endif
 
 #define MLX4_EN_NUM_SELF_TEST	5
-- 
1.7.8.2

[PATCH V1 5/6] net/mlx4_en: sk_prio <=> UP for untagged traffic

[Amir Vadai]

From: Amir Vadai <amirv@mellanox.co.il>

Since vlan egress map is only good for tagged traffic, need to have other
mapping to be used by untagged traffic.
For that, the driver uses sch_mqprio mapping. This mapping could be set by
using tc tool from iproute2 package.
Mapped UP will be used by the HW for QoS purposes, but won't go out on the
wire.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c |   15 +++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/en_tx.c     |   16 ++++++++--------
 2 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index f45d544..22c4da6 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -45,6 +45,14 @@
 #include "mlx4_en.h"
 #include "en_port.h"
 
+static int mlx4_en_setup_tc(struct net_device *dev, u8 up)
+{
+	if (up != MLX4_EN_NUM_UP)
+		return -EINVAL;
+
+	return 0;
+}
+
 static int mlx4_en_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
@@ -1055,6 +1063,7 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_poll_controller	= mlx4_en_netpoll,
 #endif
 	.ndo_set_features	= mlx4_en_set_features,
+	.ndo_setup_tc		= mlx4_en_setup_tc,
 };
 
 int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
@@ -1143,6 +1152,12 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	netif_set_real_num_tx_queues(dev, priv->tx_ring_num);
 	netif_set_real_num_rx_queues(dev, priv->rx_ring_num);
 
+	netdev_set_num_tc(dev, MLX4_EN_NUM_UP);
+
+	/* Partition Tx queues evenly amongst UP's */
+	for (i = 0; i < MLX4_EN_NUM_UP; i++)
+		netdev_set_tc_queue(dev, i, 1, MLX4_EN_NUM_TX_RINGS + i);
+
 	SET_ETHTOOL_OPS(dev, &mlx4_en_ethtool_ops);
 
 	/* Set defualt MAC */
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 445a771..f228728 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -570,15 +570,15 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk
 
 u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
-	u16 vlan_tag = 0;
+	int up = -1;
 
-	/* If we support per priority flow control and the packet contains
-	 * a vlan tag, send the packet to the TX ring assigned to that priority
-	 */
-	if (vlan_tx_tag_present(skb)) {
-		vlan_tag = vlan_tx_tag_get(skb);
-		return MLX4_EN_NUM_TX_RINGS + (vlan_tag >> 13);
-	}
+	if (vlan_tx_tag_present(skb))
+		up = (vlan_tx_tag_get(skb) >> 13);
+	else if (dev->num_tc)
+		up = netdev_get_prio_tc_map(dev, skb->priority);
+
+	if (up >= 0)
+		return MLX4_EN_NUM_TX_RINGS + up;
 
 	return __skb_tx_hash(dev, skb, MLX4_EN_NUM_TX_RINGS);
 }
-- 
1.7.8.2

[PATCH V1 6/6] IB/rdma_cm: TOS <=> UP mapping for IBoE

[Amir Vadai]

From: Amir Vadai <amirv@mellanox.co.il>

Both tagged traffic and untagged traffic use tc tool mapping.
Treat RDMA TOS same as IP TOS when mapping to SL

Since IP TOS to priority mapping is not exported, had to borrow the code from
net/ipv4/route.c

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
CC: Sean Hefty <sean.hefty@intel.com>

---

We can export IP TOS to priority mapping if the networking maintainers will say
where they want it.
---
 drivers/infiniband/core/cma.c |   35 ++++++++++++++++++++++++++++++++++-
 1 files changed, 34 insertions(+), 1 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index e3e470f..c0eeb2c 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -42,6 +42,7 @@
 #include <linux/inetdevice.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/pkt_sched.h>
 
 #include <net/tcp.h>
 #include <net/ipv6.h>
@@ -1781,6 +1782,32 @@ static int cma_resolve_iw_route(struct rdma_id_private *id_priv, int timeout_ms)
 	return 0;
 }
 
+#define ECN_OR_COST(class)	TC_PRIO_##class
+
+static const __u8 tos2prio[16] = {
+	TC_PRIO_BESTEFFORT,
+	ECN_OR_COST(BESTEFFORT),
+	TC_PRIO_BESTEFFORT,
+	ECN_OR_COST(BESTEFFORT),
+	TC_PRIO_BULK,
+	ECN_OR_COST(BULK),
+	TC_PRIO_BULK,
+	ECN_OR_COST(BULK),
+	TC_PRIO_INTERACTIVE,
+	ECN_OR_COST(INTERACTIVE),
+	TC_PRIO_INTERACTIVE,
+	ECN_OR_COST(INTERACTIVE),
+	TC_PRIO_INTERACTIVE_BULK,
+	ECN_OR_COST(INTERACTIVE_BULK),
+	TC_PRIO_INTERACTIVE_BULK,
+	ECN_OR_COST(INTERACTIVE_BULK)
+};
+
+static inline char cma_tos2priority(u8 tos)
+{
+	return tos2prio[IPTOS_TOS(tos)>>1];
+}
+
 static int cma_resolve_iboe_route(struct rdma_id_private *id_priv)
 {
 	struct rdma_route *route = &id_priv->id.route;
@@ -1826,7 +1853,13 @@ static int cma_resolve_iboe_route(struct rdma_id_private *id_priv)
 	route->path_rec->reversible = 1;
 	route->path_rec->pkey = cpu_to_be16(0xffff);
 	route->path_rec->mtu_selector = IB_SA_EQ;
-	route->path_rec->sl = id_priv->tos >> 5;
+	if (ndev->priv_flags & IFF_802_1Q_VLAN)
+		route->path_rec->sl =
+			netdev_get_prio_tc_map(vlan_dev_real_dev(ndev),
+					cma_tos2priority(id_priv->tos));
+	else
+		route->path_rec->sl = netdev_get_prio_tc_map(ndev,
+				cma_tos2priority(id_priv->tos));
 
 	route->path_rec->mtu = iboe_get_mtu(ndev->mtu);
 	route->path_rec->rate_selector = IB_SA_EQ;
-- 
1.7.8.2

Re: [PATCH V1 6/6] IB/rdma_cm: TOS <=> UP mapping for IBoE

[Eric Dumazet]

Le mercredi 21 mars 2012 à 11:25 +0200, Amir Vadai a écrit :
> From: Amir Vadai <amirv@mellanox.co.il>
> 
> Both tagged traffic and untagged traffic use tc tool mapping.
> Treat RDMA TOS same as IP TOS when mapping to SL
> 
> Since IP TOS to priority mapping is not exported, had to borrow the code from
> net/ipv4/route.c
> 
> Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
> CC: Sean Hefty <sean.hefty@intel.com>
> 
> ---
> 
> We can export IP TOS to priority mapping if the networking maintainers will say
> where they want it.

Yes please do so. This makes no sense to duplicate ip_tos2prio[]

Re: [PATCH V1 4/6] net/mlx4_en: Set max rate-limit for a TC

[Eric Dumazet]

Le mercredi 21 mars 2012 à 11:25 +0200, Amir Vadai a écrit :
> From: Amir Vadai <amirv@mellanox.co.il>
> 
> Set max rate-limit using sysfs file /sys/class/net/<interface>/qos/ratelimit
> 
> To set, enter a space separated list of values in units of 100Mbps.  For
> example to set ratelimit of 5G to TC0 and 10G for the reset on eth2 issue:
> echo 50 100 100 100 100 100 100 100 100 > /sys/class/net/eth2/qos/ratelimit
> 

Oh thats not very user friendly.

I suggest one value per file (Its probably a generic /sys rule anyway)
and not using 100Mps for the unit, even if it is the base granularity of
this hardware.


/sys/class/net/eth2/qos/0/ratelimit
...
/sys/class/net/eth2/qos/7/ratelimit

Re: [PATCH V1 6/6] IB/rdma_cm: TOS <=> UP mapping for IBoE

[Amir Vadai]

On 03/21/2012 12:03 PM, Eric Dumazet wrote:
> Le mercredi 21 mars 2012 à 11:25 +0200, Amir Vadai a écrit :
>> From: Amir Vadai<amirv@mellanox.co.il>
>>
>> Both tagged traffic and untagged traffic use tc tool mapping.
>> Treat RDMA TOS same as IP TOS when mapping to SL
>>
>> Since IP TOS to priority mapping is not exported, had to borrow the code from
>> net/ipv4/route.c
>>
>> Signed-off-by: Amir Vadai<amirv@mellanox.co.il>
>> CC: Sean Hefty<sean.hefty@intel.com>
>>
>> ---
>>
>> We can export IP TOS to priority mapping if the networking maintainers will say
>> where they want it.
>
> Yes please do so. This makes no sense to duplicate ip_tos2prio[]
>

Ok, I will add a patch to export ip_tos2prio, and will use in the code
rt_tos2priority().

- Amir

Re: [PATCH V1 4/6] net/mlx4_en: Set max rate-limit for a TC

[Amir Vadai]

On 03/21/2012 12:12 PM, Eric Dumazet wrote:
> Le mercredi 21 mars 2012 à 11:25 +0200, Amir Vadai a écrit :
>> From: Amir Vadai<amirv@mellanox.co.il>
>>
>> Set max rate-limit using sysfs file /sys/class/net/<interface>/qos/ratelimit
>>
>> To set, enter a space separated list of values in units of 100Mbps.  For
>> example to set ratelimit of 5G to TC0 and 10G for the reset on eth2 issue:
>> echo 50 100 100 100 100 100 100 100 100>  /sys/class/net/eth2/qos/ratelimit
>>
>
> Oh thats not very user friendly.
>
> I suggest one value per file (Its probably a generic /sys rule anyway)
> and not using 100Mps for the unit, even if it is the base granularity of
> this hardware.
>
>
> /sys/class/net/eth2/qos/0/ratelimit
> ...
> /sys/class/net/eth2/qos/7/ratelimit
>
>

Ok, will change the structure to be:

/sys/class/net/eth2/qos/tc0/ratelimit
...
/sys/class/net/eth2/qos/tc7/ratelimit

And use units of 1Mbps

- Amir

Re: [PATCH V1 5/6] net/mlx4_en: sk_prio <=> UP for untagged traffic

[John Fastabend]

On 3/21/2012 2:25 AM, Amir Vadai wrote:
> From: Amir Vadai <amirv@mellanox.co.il>
> 
> Since vlan egress map is only good for tagged traffic, need to have other
> mapping to be used by untagged traffic.
> For that, the driver uses sch_mqprio mapping. This mapping could be set by
> using tc tool from iproute2 package.
> Mapped UP will be used by the HW for QoS purposes, but won't go out on the
> wire.
> 
> Signed-off-by: Amir Vadai <amirv@mellanox.com>
> ---

[...]

> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
> index 445a771..f228728 100644
> --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
> +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
> @@ -570,15 +570,15 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk
>  
>  u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb)
>  {
> -	u16 vlan_tag = 0;
> +	int up = -1;
>  
> -	/* If we support per priority flow control and the packet contains
> -	 * a vlan tag, send the packet to the TX ring assigned to that priority
> -	 */
> -	if (vlan_tx_tag_present(skb)) {
> -		vlan_tag = vlan_tx_tag_get(skb);
> -		return MLX4_EN_NUM_TX_RINGS + (vlan_tag >> 13);
> -	}
> +	if (vlan_tx_tag_present(skb))
> +		up = (vlan_tx_tag_get(skb) >> 13);
> +	else if (dev->num_tc)
> +		up = netdev_get_prio_tc_map(dev, skb->priority);
> +
> +	if (up >= 0)
> +		return MLX4_EN_NUM_TX_RINGS + up;

I expected the else case covered by the netdev_set_tc_queue() setup above? Did
I miss something.

>  
>  	return __skb_tx_hash(dev, skb, MLX4_EN_NUM_TX_RINGS);
>  }

Re: [PATCH V1 5/6] net/mlx4_en: sk_prio <=> UP for untagged traffic

[Amir Vadai]

On 03/21/2012 04:20 PM, John Fastabend wrote:
> On 3/21/2012 2:25 AM, Amir Vadai wrote:
>> From: Amir Vadai<amirv@mellanox.co.il>
>>
>> Since vlan egress map is only good for tagged traffic, need to have other
>> mapping to be used by untagged traffic.
>> For that, the driver uses sch_mqprio mapping. This mapping could be set by
>> using tc tool from iproute2 package.
>> Mapped UP will be used by the HW for QoS purposes, but won't go out on the
>> wire.
>>
>> Signed-off-by: Amir Vadai<amirv@mellanox.com>
>> ---
>
> [...]
>
>> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
>> index 445a771..f228728 100644
>> --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
>> +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
>> @@ -570,15 +570,15 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk
>>
>>   u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb)
>>   {
>> -	u16 vlan_tag = 0;
>> +	int up = -1;
>>
>> -	/* If we support per priority flow control and the packet contains
>> -	 * a vlan tag, send the packet to the TX ring assigned to that priority
>> -	 */
>> -	if (vlan_tx_tag_present(skb)) {
>> -		vlan_tag = vlan_tx_tag_get(skb);
>> -		return MLX4_EN_NUM_TX_RINGS + (vlan_tag>>  13);
>> -	}
>> +	if (vlan_tx_tag_present(skb))
>> +		up = (vlan_tx_tag_get(skb)>>  13);
>> +	else if (dev->num_tc)
>> +		up = netdev_get_prio_tc_map(dev, skb->priority);
>> +
>> +	if (up>= 0)
>> +		return MLX4_EN_NUM_TX_RINGS + up;
>
> I expected the else case covered by the netdev_set_tc_queue() setup above? Did
> I miss something.
>
It is me who missed something, will fix it in V2

>>
>>   	return __skb_tx_hash(dev, skb, MLX4_EN_NUM_TX_RINGS);
>>   }
>

- Amir