* [PATCH net 0/3] qlcnic: Bug fixes
@ 2013-05-21 19:26 Shahed Shaikh
2013-05-21 19:26 ` [PATCH net 1/3] qlcnic: Return proper error codes from probe failure paths Shahed Shaikh
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Shahed Shaikh @ 2013-05-21 19:26 UTC (permalink / raw)
To: davem; +Cc: netdev, Dept_NX_Linux_NIC_Driver, Shahed Shaikh
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
This patch series includes following bug fixes:
* Fix probe failure path by returning proper error codes.
* Removed access to netdev->trans_start in driver.
* Fix netdev->features manipulation as part of change in EPORT
features
Please apply to net.
Thanks,
Shahed
Shahed Shaikh (1):
qlcnic: Fix updating netdev->features
Sony Chacko (2):
qlcnic: Return proper error codes from probe failure paths
qlcnic: remove netdev->trans_start updates within the driver
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 6 ++
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 -
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 49 ++++++++++++++-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 65 +++++---------------
.../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 1 -
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 3 +
6 files changed, 70 insertions(+), 56 deletions(-)
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH net 1/3] qlcnic: Return proper error codes from probe failure paths
2013-05-21 19:26 [PATCH net 0/3] qlcnic: Bug fixes Shahed Shaikh
@ 2013-05-21 19:26 ` Shahed Shaikh
2013-05-21 19:27 ` [PATCH net 2/3] qlcnic: remove netdev->trans_start updates within the driver Shahed Shaikh
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Shahed Shaikh @ 2013-05-21 19:26 UTC (permalink / raw)
To: davem; +Cc: netdev, Dept_NX_Linux_NIC_Driver, Sony Chacko
From: Sony Chacko <sony.chacko@qlogic.com>
Fix error paths in probe to assign proper error codes to probe return value.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 12 ++++++++----
1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 8fb836d..9a7519f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2016,8 +2016,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_enable_pcie_error_reporting(pdev);
ahw = kzalloc(sizeof(struct qlcnic_hardware_context), GFP_KERNEL);
- if (!ahw)
+ if (!ahw) {
+ err = -ENOMEM;
goto err_out_free_res;
+ }
switch (ent->device) {
case PCI_DEVICE_ID_QLOGIC_QLE824X:
@@ -2053,6 +2055,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
adapter->qlcnic_wq = create_singlethread_workqueue("qlcnic");
if (adapter->qlcnic_wq == NULL) {
+ err = -ENOMEM;
dev_err(&pdev->dev, "Failed to create workqueue\n");
goto err_out_free_netdev;
}
@@ -2133,6 +2136,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_disable_msi;
}
+ err = qlcnic_get_act_pci_func(adapter);
+ if (err)
+ goto err_out_disable_mbx_intr;
+
err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac);
if (err)
goto err_out_disable_mbx_intr;
@@ -2162,9 +2169,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
break;
}
- if (qlcnic_get_act_pci_func(adapter))
- goto err_out_disable_mbx_intr;
-
if (adapter->drv_mac_learn)
qlcnic_alloc_lb_filters_mem(adapter);
--
1.5.6
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH net 2/3] qlcnic: remove netdev->trans_start updates within the driver
2013-05-21 19:26 [PATCH net 0/3] qlcnic: Bug fixes Shahed Shaikh
2013-05-21 19:26 ` [PATCH net 1/3] qlcnic: Return proper error codes from probe failure paths Shahed Shaikh
@ 2013-05-21 19:27 ` Shahed Shaikh
2013-05-21 19:27 ` [PATCH net 3/3] qlcnic: Fix updating netdev->features Shahed Shaikh
2013-05-22 21:52 ` [PATCH net 0/3] qlcnic: Bug fixes David Miller
3 siblings, 0 replies; 5+ messages in thread
From: Shahed Shaikh @ 2013-05-21 19:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Dept_NX_Linux_NIC_Driver, Sony Chacko
From: Sony Chacko <sony.chacko@qlogic.com>
Code is removed because netdev->trans_start updates made by the driver
will be ignored by the kernel.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 --
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 +---
.../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 1 -
3 files changed, 1 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index c67d1eb..5e7fb1d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -382,8 +382,6 @@ static int qlcnic_83xx_idc_tx_soft_reset(struct qlcnic_adapter *adapter)
clear_bit(__QLCNIC_RESETTING, &adapter->state);
dev_err(&adapter->pdev->dev, "%s:\n", __func__);
- adapter->netdev->trans_start = jiffies;
-
return 0;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 9a7519f..0da38df 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -3153,10 +3153,8 @@ qlcnic_check_health(struct qlcnic_adapter *adapter)
if (adapter->need_fw_reset)
goto detach;
- if (adapter->ahw->reset_context && qlcnic_auto_fw_reset) {
+ if (adapter->ahw->reset_context && qlcnic_auto_fw_reset)
qlcnic_reset_hw_context(adapter);
- adapter->netdev->trans_start = jiffies;
- }
return 0;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index 3869c38..196b2d1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -1734,7 +1734,6 @@ static int qlcnic_sriov_vf_handle_context_reset(struct qlcnic_adapter *adapter)
if (!qlcnic_sriov_vf_reinit_driver(adapter)) {
qlcnic_sriov_vf_attach(adapter);
- adapter->netdev->trans_start = jiffies;
adapter->tx_timeo_cnt = 0;
adapter->reset_ctx_cnt = 0;
adapter->fw_fail_cnt = 0;
--
1.5.6
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH net 3/3] qlcnic: Fix updating netdev->features
2013-05-21 19:26 [PATCH net 0/3] qlcnic: Bug fixes Shahed Shaikh
2013-05-21 19:26 ` [PATCH net 1/3] qlcnic: Return proper error codes from probe failure paths Shahed Shaikh
2013-05-21 19:27 ` [PATCH net 2/3] qlcnic: remove netdev->trans_start updates within the driver Shahed Shaikh
@ 2013-05-21 19:27 ` Shahed Shaikh
2013-05-22 21:52 ` [PATCH net 0/3] qlcnic: Bug fixes David Miller
3 siblings, 0 replies; 5+ messages in thread
From: Shahed Shaikh @ 2013-05-21 19:27 UTC (permalink / raw)
To: davem; +Cc: netdev, Dept_NX_Linux_NIC_Driver, Shahed Shaikh
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
o After change in EPORT features of 82xx adapter, netdev->features needs to
be updated to reflect EPORT feature updates but driver was manipulating
netdev->features at wrong place.
o This patch uses netdev_update_features() and .ndo_fix_features() to
update netdev->features properly.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 6 +++
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 49 +++++++++++++++++++--
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 49 +++------------------
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 3 +
4 files changed, 61 insertions(+), 46 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 019c5f7..c1b693c 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -907,8 +907,11 @@ struct qlcnic_ipaddr {
#define QLCNIC_FW_HANG 0x4000
#define QLCNIC_FW_LRO_MSS_CAP 0x8000
#define QLCNIC_TX_INTR_SHARED 0x10000
+#define QLCNIC_APP_CHANGED_FLAGS 0x20000
#define QLCNIC_IS_MSI_FAMILY(adapter) \
((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
+#define QLCNIC_IS_TSO_CAPABLE(adapter) \
+ ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO)
#define QLCNIC_DEF_NUM_STS_DESC_RINGS 4
#define QLCNIC_MSIX_TBL_SPACE 8192
@@ -1034,6 +1037,7 @@ struct qlcnic_adapter {
spinlock_t rx_mac_learn_lock;
u32 file_prd_off; /*File fw product offset*/
u32 fw_version;
+ u32 offload_flags;
const struct firmware *fw;
};
@@ -1542,6 +1546,8 @@ void qlcnic_add_lb_filter(struct qlcnic_adapter *, struct sk_buff *, int, u16);
int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter);
int qlcnic_read_mac_addr(struct qlcnic_adapter *);
int qlcnic_setup_netdev(struct qlcnic_adapter *, struct net_device *, int);
+void qlcnic_set_netdev_features(struct qlcnic_adapter *,
+ struct qlcnic_esw_func_cfg *);
void qlcnic_sriov_vf_schedule_multi(struct net_device *);
void qlcnic_vf_add_mc_list(struct net_device *, u16);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 6a6512b..106a12f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -973,16 +973,57 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
return rc;
}
+static netdev_features_t qlcnic_process_flags(struct qlcnic_adapter *adapter,
+ netdev_features_t features)
+{
+ u32 offload_flags = adapter->offload_flags;
+
+ if (offload_flags & BIT_0) {
+ features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM;
+ adapter->rx_csum = 1;
+ if (QLCNIC_IS_TSO_CAPABLE(adapter)) {
+ if (!(offload_flags & BIT_1))
+ features &= ~NETIF_F_TSO;
+ else
+ features |= NETIF_F_TSO;
+
+ if (!(offload_flags & BIT_2))
+ features &= ~NETIF_F_TSO6;
+ else
+ features |= NETIF_F_TSO6;
+ }
+ } else {
+ features &= ~(NETIF_F_RXCSUM |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM);
+
+ if (QLCNIC_IS_TSO_CAPABLE(adapter))
+ features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+ adapter->rx_csum = 0;
+ }
+
+ return features;
+}
netdev_features_t qlcnic_fix_features(struct net_device *netdev,
netdev_features_t features)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ netdev_features_t changed;
- if ((adapter->flags & QLCNIC_ESWITCH_ENABLED) &&
- qlcnic_82xx_check(adapter)) {
- netdev_features_t changed = features ^ netdev->features;
- features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM);
+ if (qlcnic_82xx_check(adapter) &&
+ (adapter->flags & QLCNIC_ESWITCH_ENABLED)) {
+ if (adapter->flags & QLCNIC_APP_CHANGED_FLAGS) {
+ features = qlcnic_process_flags(adapter, features);
+ } else {
+ changed = features ^ netdev->features;
+ features ^= changed & (NETIF_F_RXCSUM |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO |
+ NETIF_F_TSO6);
+ }
}
if (!(features & NETIF_F_RXCSUM))
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 0da38df..aeb26a8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -84,14 +84,9 @@ static int qlcnic_start_firmware(struct qlcnic_adapter *);
static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter);
static void qlcnic_dev_set_npar_ready(struct qlcnic_adapter *);
static int qlcnicvf_start_firmware(struct qlcnic_adapter *);
-static void qlcnic_set_netdev_features(struct qlcnic_adapter *,
- struct qlcnic_esw_func_cfg *);
static int qlcnic_vlan_rx_add(struct net_device *, __be16, u16);
static int qlcnic_vlan_rx_del(struct net_device *, __be16, u16);
-#define QLCNIC_IS_TSO_CAPABLE(adapter) \
- ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO)
-
static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
@@ -1074,8 +1069,6 @@ void qlcnic_set_eswitch_port_features(struct qlcnic_adapter *adapter,
if (!esw_cfg->promisc_mode)
adapter->flags |= QLCNIC_PROMISC_DISABLED;
-
- qlcnic_set_netdev_features(adapter, esw_cfg);
}
int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter)
@@ -1090,51 +1083,23 @@ int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter)
return -EIO;
qlcnic_set_vlan_config(adapter, &esw_cfg);
qlcnic_set_eswitch_port_features(adapter, &esw_cfg);
+ qlcnic_set_netdev_features(adapter, &esw_cfg);
return 0;
}
-static void
-qlcnic_set_netdev_features(struct qlcnic_adapter *adapter,
- struct qlcnic_esw_func_cfg *esw_cfg)
+void qlcnic_set_netdev_features(struct qlcnic_adapter *adapter,
+ struct qlcnic_esw_func_cfg *esw_cfg)
{
struct net_device *netdev = adapter->netdev;
- unsigned long features, vlan_features;
if (qlcnic_83xx_check(adapter))
return;
- features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
- NETIF_F_IPV6_CSUM | NETIF_F_GRO);
- vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM);
-
- if (QLCNIC_IS_TSO_CAPABLE(adapter)) {
- features |= (NETIF_F_TSO | NETIF_F_TSO6);
- vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6);
- }
-
- if (netdev->features & NETIF_F_LRO)
- features |= NETIF_F_LRO;
-
- if (esw_cfg->offload_flags & BIT_0) {
- netdev->features |= features;
- adapter->rx_csum = 1;
- if (!(esw_cfg->offload_flags & BIT_1)) {
- netdev->features &= ~NETIF_F_TSO;
- features &= ~NETIF_F_TSO;
- }
- if (!(esw_cfg->offload_flags & BIT_2)) {
- netdev->features &= ~NETIF_F_TSO6;
- features &= ~NETIF_F_TSO6;
- }
- } else {
- netdev->features &= ~features;
- features &= ~features;
- adapter->rx_csum = 0;
- }
-
- netdev->vlan_features = (features & vlan_features);
+ adapter->offload_flags = esw_cfg->offload_flags;
+ adapter->flags |= QLCNIC_APP_CHANGED_FLAGS;
+ netdev_update_features(netdev);
+ adapter->flags &= ~QLCNIC_APP_CHANGED_FLAGS;
}
static int
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index 4e22e79..e7a2fe2 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -544,6 +544,9 @@ static ssize_t qlcnic_sysfs_write_esw_config(struct file *file,
switch (esw_cfg[i].op_mode) {
case QLCNIC_PORT_DEFAULTS:
qlcnic_set_eswitch_port_features(adapter, &esw_cfg[i]);
+ rtnl_lock();
+ qlcnic_set_netdev_features(adapter, &esw_cfg[i]);
+ rtnl_unlock();
break;
case QLCNIC_ADD_VLAN:
qlcnic_set_vlan_config(adapter, &esw_cfg[i]);
--
1.5.6
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH net 0/3] qlcnic: Bug fixes
2013-05-21 19:26 [PATCH net 0/3] qlcnic: Bug fixes Shahed Shaikh
` (2 preceding siblings ...)
2013-05-21 19:27 ` [PATCH net 3/3] qlcnic: Fix updating netdev->features Shahed Shaikh
@ 2013-05-22 21:52 ` David Miller
3 siblings, 0 replies; 5+ messages in thread
From: David Miller @ 2013-05-22 21:52 UTC (permalink / raw)
To: shahed.shaikh; +Cc: netdev, Dept_NX_Linux_NIC_Driver
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
Date: Tue, 21 May 2013 15:26:58 -0400
> This patch series includes following bug fixes:
> * Fix probe failure path by returning proper error codes.
> * Removed access to netdev->trans_start in driver.
> * Fix netdev->features manipulation as part of change in EPORT
> features
>
> Please apply to net.
Series applied, thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-05-22 21:52 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-21 19:26 [PATCH net 0/3] qlcnic: Bug fixes Shahed Shaikh
2013-05-21 19:26 ` [PATCH net 1/3] qlcnic: Return proper error codes from probe failure paths Shahed Shaikh
2013-05-21 19:27 ` [PATCH net 2/3] qlcnic: remove netdev->trans_start updates within the driver Shahed Shaikh
2013-05-21 19:27 ` [PATCH net 3/3] qlcnic: Fix updating netdev->features Shahed Shaikh
2013-05-22 21:52 ` [PATCH net 0/3] qlcnic: Bug fixes David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).