[PATCH net-next 0/6] smsc: replace printk with netdev_ calls

[PATCH net-next 0/6] smsc: replace printk with netdev_ calls

[Ben Boeckel]

Clean up printk calls in smsc network drivers by using netdev_<level>
instead.

Ben Boeckel (6):
  epic100: replace printk with netdev_ calls
  smc91x: replace printk with netdev_ calls
  smc911x: replace printk with netdev_ calls
  smc9194: replace printk with netdev_ calls
  smc91c92_cs: replace printk with netdev_ calls
  smsc9420: replace printk with netdev_ calls

 drivers/net/ethernet/smsc/epic100.c     | 57 ++++++++++++++++-----------------
 drivers/net/ethernet/smsc/smc911x.c     | 34 +++++++++++---------
 drivers/net/ethernet/smsc/smc911x.h     |  2 +-
 drivers/net/ethernet/smsc/smc9194.c     | 24 +++++++-------
 drivers/net/ethernet/smsc/smc91c92_cs.c |  5 ++-
 drivers/net/ethernet/smsc/smc91x.c      | 53 +++++++++++++++---------------
 drivers/net/ethernet/smsc/smc91x.h      |  2 +-
 drivers/net/ethernet/smsc/smsc9420.c    |  8 ++---
 8 files changed, 92 insertions(+), 93 deletions(-)

-- 
1.8.3.1

[PATCH net-next 1/6] epic100: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/epic100.c | 57 ++++++++++++++++++-------------------
 1 file changed, 27 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
index 8c5c24a..578a773 100644
--- a/drivers/net/ethernet/smsc/epic100.c
+++ b/drivers/net/ethernet/smsc/epic100.c
@@ -91,9 +91,9 @@ static int rx_copybreak;
 
 /* These identify the driver base version and may not be removed. */
 static char version[] =
-DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n";
+DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>";
 static char version2[] =
-"  (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+"  (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
@@ -332,9 +332,7 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 /* when built into the kernel, we only print version if device is found */
 #ifndef MODULE
-	static int printed_version;
-	if (!printed_version++)
-		printk(KERN_INFO "%s%s", version, version2);
+	pr_info_once("%s%s\n", version, version2);
 #endif
 
 	card_idx++;
@@ -490,7 +488,7 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret < 0)
 		goto err_out_unmap_rx;
 
-	printk(KERN_INFO "%s: %s at %lx, IRQ %d, %pM\n",
+	netdev_info(dev, "%s: %s at %lx, IRQ %d, %pM\n",
 	       dev->name, pci_id_tbl[chip_idx].name,
 	       (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
 	       dev->dev_addr);
@@ -703,7 +701,7 @@ static int epic_open(struct net_device *dev)
 			mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
 		if (dev->if_port == 1) {
 			if (debug > 1)
-				printk(KERN_INFO "%s: Using the 10base2 transceiver, MII "
+				netdev_info(dev, "%s: Using the 10base2 transceiver, MII "
 					   "status %4.4x.\n",
 					   dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));
 		}
@@ -715,7 +713,7 @@ static int epic_open(struct net_device *dev)
 			else if (! (mii_lpa & LPA_LPACK))
 				mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
 			if (debug > 1)
-				printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d"
+				netdev_info(dev, "%s: Setting %s-duplex based on MII xcvr %d"
 					   " register read of %4.4x.\n", dev->name,
 					   ep->mii.full_duplex ? "full" : "half",
 					   ep->phys[0], mii_lpa);
@@ -738,7 +736,7 @@ static int epic_open(struct net_device *dev)
 	     TxUnderrun);
 
 	if (debug > 1) {
-		printk(KERN_DEBUG "%s: epic_open() ioaddr %p IRQ %d "
+		netdev_dbg(dev, "%s: epic_open() ioaddr %p IRQ %d "
 		       "status %4.4x %s-duplex.\n",
 		       dev->name, ioaddr, irq, er32(GENCTL),
 		       ep->mii.full_duplex ? "full" : "half");
@@ -790,7 +788,7 @@ static void epic_restart(struct net_device *dev)
 	/* Soft reset the chip. */
 	ew32(GENCTL, 0x4001);
 
-	printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
+	netdev_dbg(dev, "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
 		   dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
 	udelay(1);
 
@@ -827,7 +825,7 @@ static void epic_restart(struct net_device *dev)
 	     ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
 	     TxUnderrun);
 
-	printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
+	netdev_dbg(dev, "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
 		   " interrupt %4.4x.\n",
 		   dev->name, er32(COMMAND), er32(GENCTL), er32(INTSTAT));
 }
@@ -846,7 +844,7 @@ static void check_media(struct net_device *dev)
 		return;
 	if (ep->mii.full_duplex != duplex) {
 		ep->mii.full_duplex = duplex;
-		printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link"
+		netdev_info(dev, "%s: Setting %s-duplex based on MII #%d link"
 			   " partner capability of %4.4x.\n", dev->name,
 			   ep->mii.full_duplex ? "full" : "half", ep->phys[0], mii_lpa);
 		ew32(TxCtrl, ep->mii.full_duplex ? 0x7F : 0x79);
@@ -861,9 +859,9 @@ static void epic_timer(unsigned long data)
 	int next_tick = 5*HZ;
 
 	if (debug > 3) {
-		printk(KERN_DEBUG "%s: Media monitor tick, Tx status %8.8x.\n",
+		netdev_dbg(dev, "%s: Media monitor tick, Tx status %8.8x.\n",
 		       dev->name, er32(TxSTAT));
-		printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x "
+		netdev_dbg(dev, "%s: Other registers are IntMask %4.4x "
 		       "IntStatus %4.4x RxStatus %4.4x.\n", dev->name,
 		       er32(INTMASK), er32(INTSTAT), er32(RxSTAT));
 	}
@@ -880,10 +878,10 @@ static void epic_tx_timeout(struct net_device *dev)
 	void __iomem *ioaddr = ep->ioaddr;
 
 	if (debug > 0) {
-		printk(KERN_WARNING "%s: Transmit timeout using MII device, "
+		netdev_warn(dev, "%s: Transmit timeout using MII device, "
 		       "Tx status %4.4x.\n", dev->name, er16(TxSTAT));
 		if (debug > 1) {
-			printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
+			netdev_dbg(dev, "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
 				   dev->name, ep->dirty_tx, ep->cur_tx);
 		}
 	}
@@ -994,7 +992,7 @@ static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	ew32(COMMAND, TxQueued);
 
 	if (debug > 4)
-		printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, "
+		netdev_dbg(dev, "%s: Queued Tx packet size %d to slot %d, "
 		       "flag %2.2x Tx status %8.8x.\n", dev->name, skb->len,
 		       entry, ctrl_word, er32(TxSTAT));
 
@@ -1009,7 +1007,7 @@ static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
 #ifndef final_version
 	/* There was an major error, log it. */
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+		netdev_dbg(dev, "%s: Transmit error, Tx status %8.8x.\n",
 		       dev->name, status);
 #endif
 	stats->tx_errors++;
@@ -1057,7 +1055,7 @@ static void epic_tx(struct net_device *dev, struct epic_private *ep)
 
 #ifndef final_version
 	if (cur_tx - dirty_tx > TX_RING_SIZE) {
-		printk(KERN_WARNING
+		netdev_warn(dev,
 		       "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
 		       dev->name, dirty_tx, cur_tx, ep->tx_full);
 		dirty_tx += TX_RING_SIZE;
@@ -1086,7 +1084,7 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 	ew32(INTSTAT, status & EpicNormalEvent);
 
 	if (debug > 4) {
-		printk(KERN_DEBUG "%s: Interrupt, status=%#8.8x new "
+		netdev_dbg(dev, "%s: Interrupt, status=%#8.8x new "
 		       "intstat=%#8.8x.\n", dev->name, status, er32(INTSTAT));
 	}
 
@@ -1125,7 +1123,7 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 			ew32(COMMAND, RestartTx);
 		}
 		if (status & PCIBusErr170) {
-			printk(KERN_ERR "%s: PCI Bus Error! status %4.4x.\n",
+			netdev_err(dev, "%s: PCI Bus Error! status %4.4x.\n",
 					 dev->name, status);
 			epic_pause(dev);
 			epic_restart(dev);
@@ -1136,7 +1134,7 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 
 out:
 	if (debug > 3) {
-		printk(KERN_DEBUG "%s: exit interrupt, intr_status=%#4.4x.\n",
+		netdev_dbg(dev, "%s: exit interrupt, intr_status=%#4.4x.\n",
 				   dev->name, status);
 	}
 
@@ -1151,7 +1149,7 @@ static int epic_rx(struct net_device *dev, int budget)
 	int work_done = 0;
 
 	if (debug > 4)
-		printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry,
+		netdev_dbg(dev, " In epic_rx(), entry %d %8.8x.\n", entry,
 			   ep->rx_ring[entry].rxstatus);
 
 	if (rx_work_limit > budget)
@@ -1162,15 +1160,15 @@ static int epic_rx(struct net_device *dev, int budget)
 		int status = ep->rx_ring[entry].rxstatus;
 
 		if (debug > 4)
-			printk(KERN_DEBUG "  epic_rx() status was %8.8x.\n", status);
+			netdev_dbg(dev, "  epic_rx() status was %8.8x.\n", status);
 		if (--rx_work_limit < 0)
 			break;
 		if (status & 0x2006) {
 			if (debug > 2)
-				printk(KERN_DEBUG "%s: epic_rx() error status was %8.8x.\n",
+				netdev_dbg(dev, "%s: epic_rx() error status was %8.8x.\n",
 					   dev->name, status);
 			if (status & 0x2000) {
-				printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
+				netdev_warn(dev, "%s: Oversized Ethernet frame spanned "
 					   "multiple buffers, status %4.4x!\n", dev->name, status);
 				dev->stats.rx_length_errors++;
 			} else if (status & 0x0006)
@@ -1183,7 +1181,7 @@ static int epic_rx(struct net_device *dev, int budget)
 			struct sk_buff *skb;
 
 			if (pkt_len > PKT_BUF_SZ - 4) {
-				printk(KERN_ERR "%s: Oversized Ethernet frame, status %x "
+				netdev_err(dev, "%s: Oversized Ethernet frame, status %x "
 					   "%d bytes.\n",
 					   dev->name, status, pkt_len);
 				pkt_len = 1514;
@@ -1305,7 +1303,7 @@ static int epic_close(struct net_device *dev)
 	napi_disable(&ep->napi);
 
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
+		netdev_dbg(dev, "%s: Shutting down ethercard, status was %2.2x.\n",
 		       dev->name, er32(INTSTAT));
 
 	del_timer_sync(&ep->timer);
@@ -1587,8 +1585,7 @@ static int __init epic_init (void)
 {
 /* when a module, this is printed whether or not devices are found in probe */
 #ifdef MODULE
-	printk (KERN_INFO "%s%s",
-		version, version2);
+	pr_info ("%s%s\n", version, version2);
 #endif
 
 	return pci_register_driver(&epic_driver);
-- 
1.8.3.1

Re: [PATCH net-next 1/6] epic100: replace printk with netdev_ calls

[Joe Perches]

On Fri, 2013-10-25 at 02:26 -0400, Ben Boeckel wrote:
> Signed-off-by: Ben Boeckel <mathstuf@gmail.com>

Hi Ben.

Please run your patches through checkpatch.pl

> diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
[]
> @@ -490,7 +488,7 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	if (ret < 0)
>  		goto err_out_unmap_rx;
>  
> -	printk(KERN_INFO "%s: %s at %lx, IRQ %d, %pM\n",
> +	netdev_info(dev, "%s: %s at %lx, IRQ %d, %pM\n",
>  	       dev->name, pci_id_tbl[chip_idx].name,
>  	       (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
>  	       dev->dev_addr);

Please align the subsequent lines to the open parenthesis
and this conversion would now emit dev->name twice.

Try:
	netdev_info(dev, "%s at %lx, IRQ %d, %pM\n",
		    pci_id_tbl[chip_idx].name,
		    (long)pci_resource_start(pdev, EPIC_BAR),
		    pdev->irq, dev->dev_addr);

> @@ -703,7 +701,7 @@ static int epic_open(struct net_device *dev)
>  			mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
>  		if (dev->if_port == 1) {
>  			if (debug > 1)
> -				printk(KERN_INFO "%s: Using the 10base2 transceiver, MII "
> +				netdev_info(dev, "%s: Using the 10base2 transceiver, MII "
>  					   "status %4.4x.\n",

Please coalesce the format fragments into a single line.

>  					   dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));

same problem with duplicate dev->name

etc.

Re: [PATCH net-next 1/6] epic100: replace printk with netdev_ calls

[Ben Boeckel]

On Thu, Oct 24, 2013 at 23:41:06 -0700, Joe Perches wrote:
> On Fri, 2013-10-25 at 02:26 -0400, Ben Boeckel wrote:
> Please run your patches through checkpatch.pl

Done. There are some 80 character limit issues yet, but they're literal
strings for the most part. I also left rampant space-for-indent as-is
(though I did nab a few space-between-tab instances I spotted).

> > diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
> []
> > @@ -490,7 +488,7 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> >  	if (ret < 0)
> >  		goto err_out_unmap_rx;
> >  
> > -	printk(KERN_INFO "%s: %s at %lx, IRQ %d, %pM\n",
> > +	netdev_info(dev, "%s: %s at %lx, IRQ %d, %pM\n",
> >  	       dev->name, pci_id_tbl[chip_idx].name,
> >  	       (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
> >  	       dev->dev_addr);
> 
> Please align the subsequent lines to the open parenthesis
> and this conversion would now emit dev->name twice.

Done.

> Please coalesce the format fragments into a single line.
> 
> >  					   dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));
> 
> same problem with duplicate dev->name

Done.

--Ben

[PATCH net-next 2/6] smc91x: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc91x.c | 53 +++++++++++++++++++-------------------
 drivers/net/ethernet/smsc/smc91x.h |  2 +-
 2 files changed, 28 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 73be7f3..d425d33 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -58,7 +58,7 @@
  *   22/09/04  Nicolas Pitre      big update (see commit log for details)
  */
 static const char version[] =
-	"smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>\n";
+	"smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>";
 
 /* Debugging level */
 #ifndef SMC_DEBUG
@@ -152,10 +152,10 @@ MODULE_ALIAS("platform:smc91x");
 #define DBG(n, args...)					\
 	do {						\
 		if (SMC_DEBUG >= (n))			\
-			printk(args);	\
+			printk(KERN_DEBUG args);	\
 	} while (0)
 
-#define PRINTK(args...)   printk(args)
+#define PRINTK(args...)   printk(KERN_DEBUG args)
 #else
 #define DBG(n, args...)   do { } while(0)
 #define PRINTK(args...)   printk(KERN_DEBUG args)
@@ -173,6 +173,7 @@ static void PRINT_PKT(u_char *buf, int length)
 
 	for (i = 0; i < lines ; i ++) {
 		int cur;
+		printk(KERN_DEBUG);
 		for (cur = 0; cur < 8; cur++) {
 			u_char a, b;
 			a = *buf++;
@@ -181,6 +182,7 @@ static void PRINT_PKT(u_char *buf, int length)
 		}
 		printk("\n");
 	}
+	printk(KERN_DEBUG);
 	for (i = 0; i < remainder/2 ; i++) {
 		u_char a, b;
 		a = *buf++;
@@ -226,7 +228,7 @@ static void PRINT_PKT(u_char *buf, int length)
 		unsigned long timeout = jiffies + 2;			\
 		while (SMC_GET_MMU_CMD(lp) & MC_BUSY) {		\
 			if (time_after(jiffies, timeout)) {		\
-				printk("%s: timeout %s line %d\n",	\
+				netdev_dbg(dev, "%s: timeout %s line %d\n",	\
 					dev->name, __FILE__, __LINE__);	\
 				break;					\
 			}						\
@@ -433,7 +435,7 @@ static inline void  smc_rcv(struct net_device *dev)
 		}
 		if (packet_len < 6) {
 			/* bloody hardware */
-			printk(KERN_ERR "%s: fubar (rxlen %u status %x\n",
+			netdev_err(dev, "%s: fubar (rxlen %u status %x\n",
 					dev->name, packet_len, status);
 			status |= RS_TOOSHORT;
 		}
@@ -568,7 +570,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 
 	packet_no = SMC_GET_AR(lp);
 	if (unlikely(packet_no & AR_FAILED)) {
-		printk("%s: Memory allocation failed.\n", dev->name);
+		netdev_err(dev, "%s: Memory allocation failed.\n", dev->name);
 		dev->stats.tx_errors++;
 		dev->stats.tx_fifo_errors++;
 		smc_special_unlock(&lp->lock, flags);
@@ -654,7 +656,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	numPages = ((skb->len & ~1) + (6 - 1)) >> 8;
 	if (unlikely(numPages > 7)) {
-		printk("%s: Far too big packet error.\n", dev->name);
+		netdev_warn(dev, "%s: Far too big packet error.\n", dev->name);
 		dev->stats.tx_errors++;
 		dev->stats.tx_dropped++;
 		dev_kfree_skb(skb);
@@ -740,7 +742,7 @@ static void smc_tx(struct net_device *dev)
 			"late collision" : "too many collisions");
 		dev->stats.tx_window_errors++;
 		if (!(dev->stats.tx_window_errors & 63) && net_ratelimit()) {
-			printk(KERN_INFO "%s: unexpectedly large number of "
+			netdev_info(dev, "%s: unexpectedly large number of "
 			       "bad collisions. Please check duplex "
 			       "setting.\n", dev->name);
 		}
@@ -1055,7 +1057,7 @@ static void smc_phy_configure(struct work_struct *work)
 		goto smc_phy_configure_exit;
 
 	if (smc_phy_reset(dev, phyaddr)) {
-		printk("%s: PHY reset timed out\n", dev->name);
+		netdev_info(dev, "%s: PHY reset timed out\n", dev->name);
 		goto smc_phy_configure_exit;
 	}
 
@@ -1082,7 +1084,7 @@ static void smc_phy_configure(struct work_struct *work)
 	my_phy_caps = smc_phy_read(dev, phyaddr, MII_BMSR);
 
 	if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
-		printk(KERN_INFO "Auto negotiation NOT supported\n");
+		netdev_info(dev, "Auto negotiation NOT supported\n");
 		smc_phy_fixed(dev);
 		goto smc_phy_configure_exit;
 	}
@@ -1179,7 +1181,7 @@ static void smc_10bt_check_media(struct net_device *dev, int init)
 			netif_carrier_on(dev);
 		}
 		if (netif_msg_link(lp))
-			printk(KERN_INFO "%s: link %s\n", dev->name,
+			netdev_info(dev, "%s: link %s\n", dev->name,
 			       new_carrier ? "up" : "down");
 	}
 }
@@ -1856,7 +1858,6 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 		     unsigned long irq_flags)
 {
 	struct smc_local *lp = netdev_priv(dev);
-	static int version_printed = 0;
 	int retval;
 	unsigned int val, revision_register;
 	const char *version_string;
@@ -1868,7 +1869,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val);
 	if ((val & 0xFF00) != 0x3300) {
 		if ((val & 0xFF) == 0x33) {
-			printk(KERN_WARNING
+			netdev_warn(dev,
 				"%s: Detected possible byte-swapped interface"
 				" at IOADDR %p\n", CARDNAME, ioaddr);
 		}
@@ -1897,7 +1898,8 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	val = SMC_GET_BASE(lp);
 	val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
 	if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
-		printk("%s: IOADDR %p doesn't match configuration (%x).\n",
+		netdev_warn(dev, "%s: IOADDR %p doesn't match "
+			"configuration (%x).\n",
 			CARDNAME, ioaddr, val);
 	}
 
@@ -1912,8 +1914,8 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	version_string = chip_ids[ (revision_register >> 4) & 0xF];
 	if (!version_string || (revision_register & 0xff00) != 0x3300) {
 		/* I don't recognize this chip, so... */
-		printk("%s: IO %p: Unrecognized revision register 0x%04x"
-			", Contact author.\n", CARDNAME,
+		netdev_warn(dev, "%s: IO %p: Unrecognized revision "
+			"register 0x%04x, Contact author.\n", CARDNAME,
 			ioaddr, revision_register);
 
 		retval = -ENODEV;
@@ -1921,8 +1923,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	}
 
 	/* At this point I'll assume that the chip is an SMC91x. */
-	if (version_printed++ == 0)
-		printk("%s", version);
+	pr_info_once("%s\n", version);
 
 	/* fill in some of the fields */
 	dev->base_addr = (unsigned long)ioaddr;
@@ -1940,7 +1941,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	/*
 	 * If dev->irq is 0, then the device has to be banged on to see
 	 * what the IRQ is.
- 	 *
+	 *
 	 * This banging doesn't always detect the IRQ, for unknown reasons.
 	 * a workaround is to reset the chip and try again.
 	 *
@@ -1965,7 +1966,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 		}
 	}
 	if (dev->irq == 0) {
-		printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
+		netdev_warn(dev, "%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
 			dev->name);
 		retval = -ENODEV;
 		goto err_out;
@@ -2030,7 +2031,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	retval = register_netdev(dev);
 	if (retval == 0) {
 		/* now, print out the card info, in a short format.. */
-		printk("%s: %s (rev %d) at %p IRQ %d",
+		netdev_info(dev, "%s: %s (rev %d) at %p IRQ %d",
 			dev->name, version_string, revision_register & 0x0f,
 			lp->base, dev->irq);
 
@@ -2042,11 +2043,11 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 			THROTTLE_TX_PKTS ? " [throttle_tx]" : "");
 
 		if (!is_valid_ether_addr(dev->dev_addr)) {
-			printk("%s: Invalid ethernet MAC address.  Please "
-			       "set using ifconfig\n", dev->name);
+			netdev_warn(dev, "%s: Invalid ethernet MAC address. "
+					"Please set using ifconfig\n", dev->name);
 		} else {
 			/* Print the Ethernet address */
-			printk("%s: Ethernet addr: %pM\n",
+			netdev_info(dev, "%s: Ethernet addr: %pM\n",
 			       dev->name, dev->dev_addr);
 		}
 
@@ -2165,7 +2166,7 @@ static inline void smc_request_datacs(struct platform_device *pdev, struct net_d
 			return;
 
 		if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) {
-			printk(KERN_INFO "%s: failed to request datacs memory region.\n", CARDNAME);
+			netdev_info(ndev, "%s: failed to request datacs memory region.\n", CARDNAME);
 			return;
 		}
 
@@ -2307,7 +2308,7 @@ static int smc_drv_probe(struct platform_device *pdev)
  out_free_netdev:
 	free_netdev(ndev);
  out:
-	printk("%s: not found (%d).\n", CARDNAME, ret);
+	netdev_info(dev, "%s: not found (%d).\n", CARDNAME, ret);
 
 	return ret;
 }
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index 98eedb9..22794c5 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -907,7 +907,7 @@ static const char * chip_ids[ 16 ] =  {
 	({								\
 		int __b = SMC_CURRENT_BANK(lp);			\
 		if (unlikely((__b & ~0xf0) != (0x3300 | bank))) {	\
-			printk( "%s: bank reg screwed (0x%04x)\n",	\
+			printk( KERN_ERR "%s: bank reg screwed (0x%04x)\n",	\
 				CARDNAME, __b );			\
 			BUG();						\
 		}							\
-- 
1.8.3.1

[PATCH net-next 3/6] smc911x: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc911x.c | 34 ++++++++++++++++++----------------
 drivers/net/ethernet/smsc/smc911x.h |  2 +-
 2 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index afe01c4..22efe1c 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -109,10 +109,10 @@ MODULE_ALIAS("platform:smc911x");
 #define DBG(n, args...)				 \
 	do {					 \
 		if (SMC_DEBUG & (n))		 \
-			printk(args);		 \
+			printk(KERN_DEBUG args); \
 	} while (0)
 
-#define PRINTK(args...)   printk(args)
+#define PRINTK(args...)   printk(KERN_DEBUG args)
 #else
 #define DBG(n, args...)   do { } while (0)
 #define PRINTK(args...)   printk(KERN_DEBUG args)
@@ -130,6 +130,7 @@ static void PRINT_PKT(u_char *buf, int length)
 
 	for (i = 0; i < lines ; i ++) {
 		int cur;
+		printk(KERN_DEBUG);
 		for (cur = 0; cur < 8; cur++) {
 			u_char a, b;
 			a = *buf++;
@@ -138,6 +139,7 @@ static void PRINT_PKT(u_char *buf, int length)
 		}
 		printk("\n");
 	}
+	printk(KERN_DEBUG);
 	for (i = 0; i < remainder/2 ; i++) {
 		u_char a, b;
 		a = *buf++;
@@ -545,7 +547,7 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 *	  End padding				 15 bytes
 	 */
 	if (unlikely(free < (skb->len + 8 + 15 + 15))) {
-		printk("%s: No Tx free space %d < %d\n",
+		netdev_warn(dev, "%s: No Tx free space %d < %d\n",
 			dev->name, free, skb->len);
 		lp->pending_tx_skb = NULL;
 		dev->stats.tx_errors++;
@@ -900,7 +902,7 @@ static void smc911x_phy_configure(struct work_struct *work)
 		return;
 
 	if (smc911x_phy_reset(dev, phyaddr)) {
-		printk("%s: PHY reset timed out\n", dev->name);
+		netdev_info(dev, "%s: PHY reset timed out\n", dev->name);
 		return;
 	}
 	spin_lock_irqsave(&lp->lock, flags);
@@ -922,7 +924,7 @@ static void smc911x_phy_configure(struct work_struct *work)
 	/* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
 	SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps);
 	if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
-		printk(KERN_INFO "Auto negotiation NOT supported\n");
+		netdev_info(dev, "Auto negotiation NOT supported\n");
 		smc911x_phy_fixed(dev);
 		goto smc911x_phy_configure_exit;
 	}
@@ -1805,7 +1807,7 @@ static int smc911x_probe(struct net_device *dev)
 	val = SMC_GET_BYTE_TEST(lp);
 	DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val);
 	if (val != 0x87654321) {
-		printk(KERN_ERR "Invalid chip endian 0x%08x\n",val);
+		netdev_err(dev, "Invalid chip endian 0x%08x\n",val);
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -1821,7 +1823,7 @@ static int smc911x_probe(struct net_device *dev)
 		if (chip_ids[i].id == chip_id) break;
 	}
 	if (!chip_ids[i].id) {
-		printk(KERN_ERR "Unknown chip ID %04x\n", chip_id);
+		netdev_err(dev, "Unknown chip ID %04x\n", chip_id);
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -1835,7 +1837,7 @@ static int smc911x_probe(struct net_device *dev)
 
 	/* Validate the TX FIFO size requested */
 	if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) {
-		printk(KERN_ERR "Invalid TX FIFO size requested %d\n", tx_fifo_kb);
+		netdev_err(dev, "Invalid TX FIFO size requested %d\n", tx_fifo_kb);
 		retval = -EINVAL;
 		goto err_out;
 	}
@@ -1924,7 +1926,7 @@ static int smc911x_probe(struct net_device *dev)
 		}
 	}
 	if (dev->irq == 0) {
-		printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
+		netdev_warn(dev, "%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
 			dev->name);
 		retval = -ENODEV;
 		goto err_out;
@@ -1980,24 +1982,24 @@ static int smc911x_probe(struct net_device *dev)
 	retval = register_netdev(dev);
 	if (retval == 0) {
 		/* now, print out the card info, in a short format.. */
-		printk("%s: %s (rev %d) at %#lx IRQ %d",
+		netdev_info(dev, "%s: %s (rev %d) at %#lx IRQ %d",
 			dev->name, version_string, lp->revision,
 			dev->base_addr, dev->irq);
 
 #ifdef SMC_USE_DMA
 		if (lp->rxdma != -1)
-			printk(" RXDMA %d ", lp->rxdma);
+			printk(" RXDMA %d", lp->rxdma);
 
 		if (lp->txdma != -1)
-			printk("TXDMA %d", lp->txdma);
+			printk(" TXDMA %d", lp->txdma);
 #endif
 		printk("\n");
 		if (!is_valid_ether_addr(dev->dev_addr)) {
-			printk("%s: Invalid ethernet MAC address. Please "
-					"set using ifconfig\n", dev->name);
+			netdev_warn(dev, "%s: Invalid ethernet MAC address. "
+					"Please set using ifconfig\n", dev->name);
 		} else {
 			/* Print the Ethernet address */
-			printk("%s: Ethernet addr: %pM\n",
+			netdev_info(dev, "%s: Ethernet addr: %pM\n",
 				dev->name, dev->dev_addr);
 		}
 
@@ -2093,7 +2095,7 @@ release_both:
 release_1:
 		release_mem_region(res->start, SMC911X_IO_EXTENT);
 out:
-		printk("%s: not found (%d).\n", CARDNAME, ret);
+		netdev_info(ndev, "%s: not found (%d).\n", CARDNAME, ret);
 	}
 #ifdef SMC_USE_DMA
 	else {
diff --git a/drivers/net/ethernet/smsc/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
index d51261b..b1b76e0 100644
--- a/drivers/net/ethernet/smsc/smc911x.h
+++ b/drivers/net/ethernet/smsc/smc911x.h
@@ -227,7 +227,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
 #define SMC_DMA_ACK_IRQ(dev, dma)					\
 {									\
 	if (DCSR(dma) & DCSR_BUSERR) {					\
-		printk("%s: DMA %d bus error!\n", dev->name, dma);	\
+		netdev_err(dev, "%s: DMA %d bus error!\n", dev->name, dma);	\
 	}								\
 	DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;		\
 }
-- 
1.8.3.1

[PATCH net-next 4/6] smc9194: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc9194.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index e85c2e7..c0a45a9 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -55,7 +55,7 @@
  ----------------------------------------------------------------------------*/
 
 static const char version[] =
-	"smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)\n";
+	"smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)";
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -612,7 +612,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 	packet_no = inb( ioaddr + PNR_ARR + 1 );
 	if ( packet_no & 0x80 ) {
 		/* or isn't there?  BAD CHIP! */
-		printk(KERN_DEBUG CARDNAME": Memory allocation failed.\n");
+		netdev_dbg(dev, CARDNAME": Memory allocation failed.\n");
 		dev_kfree_skb_any(skb);
 		lp->saved_skb = NULL;
 		netif_wake_queue(dev);
@@ -865,7 +865,6 @@ static const struct net_device_ops smc_netdev_ops = {
 static int __init smc_probe(struct net_device *dev, int ioaddr)
 {
 	int i, memory, retval;
-	static unsigned version_printed;
 	unsigned int bank;
 
 	const char *version_string;
@@ -937,8 +936,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 	   It might be prudent to check a listing of MAC addresses
 	   against the hardware address, or do some other tests. */
 
-	if (version_printed++ == 0)
-		printk("%s", version);
+	pr_info_once("%s\n", version);
 
 	/* fill in some of the fields */
 	dev->base_addr = ioaddr;
@@ -1027,18 +1025,18 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 
 	/* now, print out the card info, in a short format.. */
 
-	printk("%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
+	netdev_info(dev, "%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
 		version_string, revision_register & 0xF, ioaddr, dev->irq,
 		if_string, memory );
 	/*
 	 . Print the Ethernet address
 	*/
-	printk("ADDR: %pM\n", dev->dev_addr);
+	netdev_info(dev, "ADDR: %pM\n", dev->dev_addr);
 
 	/* Grab the IRQ */
       	retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
       	if (retval) {
-		printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
+		netdev_warn(dev, "%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
 			dev->irq, retval);
   	  	goto err_out;
       	}
@@ -1061,13 +1059,14 @@ static void print_packet( byte * buf, int length )
 	int remainder;
 	int lines;
 
-	printk("Packet of length %d\n", length);
+	printk(KERN_DEBUG "Packet of length %d\n", length);
 	lines = length / 16;
 	remainder = length % 16;
 
 	for ( i = 0; i < lines ; i ++ ) {
 		int cur;
 
+		printk(KERN_DEBUG);
 		for ( cur = 0; cur < 8; cur ++ ) {
 			byte a, b;
 
@@ -1077,6 +1076,7 @@ static void print_packet( byte * buf, int length )
 		}
 		printk("\n");
 	}
+	printk(KERN_DEBUG);
 	for ( i = 0; i < remainder/2 ; i++ ) {
 		byte a, b;
 
@@ -1151,7 +1151,7 @@ static void smc_timeout(struct net_device *dev)
 {
 	/* If we get here, some higher level has decided we are broken.
 	   There should really be a "kick me" function call instead. */
-	printk(KERN_WARNING CARDNAME": transmit timed out, %s?\n",
+	netdev_warn(dev, CARDNAME": transmit timed out, %s?\n",
 		tx_done(dev) ? "IRQ conflict" :
 		"network cable problem");
 	/* "kick" the adaptor */
@@ -1323,7 +1323,7 @@ static void smc_tx( struct net_device * dev )
 	dev->stats.tx_errors++;
 	if ( tx_status & TS_LOSTCAR ) dev->stats.tx_carrier_errors++;
 	if ( tx_status & TS_LATCOL  ) {
-		printk(KERN_DEBUG CARDNAME
+		netdev_dbg(dev, CARDNAME
 			": Late collision occurred on last xmit.\n");
 		dev->stats.tx_window_errors++;
 	}
@@ -1332,7 +1332,7 @@ static void smc_tx( struct net_device * dev )
 #endif
 
 	if ( tx_status & TS_SUCCESS ) {
-		printk(CARDNAME": Successful packet caused interrupt\n");
+		netdev_info(dev, CARDNAME": Successful packet caused interrupt\n");
 	}
 	/* re-enable transmit */
 	SMC_SELECT_BANK( 0 );
-- 
1.8.3.1

[PATCH net-next 5/6] smc91c92_cs: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc91c92_cs.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c
index 656d2e2..eb48b1b 100644
--- a/drivers/net/ethernet/smsc/smc91c92_cs.c
+++ b/drivers/net/ethernet/smsc/smc91c92_cs.c
@@ -1036,7 +1036,7 @@ static void smc_dump(struct net_device *dev)
     save = inw(ioaddr + BANK_SELECT);
     for (w = 0; w < 4; w++) {
 	SMC_SELECT_BANK(w);
-	netdev_printk(KERN_DEBUG, dev, "bank %d: ", w);
+	netdev_dbg(dev, "bank %d: ", w);
 	for (i = 0; i < 14; i += 2)
 	    pr_cont(" %04x", inw(ioaddr + i));
 	pr_cont("\n");
@@ -1213,8 +1213,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
     if (smc->saved_skb) {
 	/* THIS SHOULD NEVER HAPPEN. */
 	dev->stats.tx_aborted_errors++;
-	netdev_printk(KERN_DEBUG, dev,
-		      "Internal error -- sent packet while busy\n");
+	netdev_dbg(dev, "Internal error -- sent packet while busy\n");
 	return NETDEV_TX_BUSY;
     }
     smc->saved_skb = skb;
-- 
1.8.3.1

[PATCH net-next 6/6] smsc9420: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smsc9420.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
index e55e336..6840304 100644
--- a/drivers/net/ethernet/smsc/smsc9420.c
+++ b/drivers/net/ethernet/smsc/smsc9420.c
@@ -1600,24 +1600,24 @@ smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (!(pci_resource_flags(pdev, SMSC_BAR) & IORESOURCE_MEM)) {
-		printk(KERN_ERR "Cannot find PCI device base address\n");
+		netdev_err(dev, "Cannot find PCI device base address\n");
 		goto out_free_netdev_2;
 	}
 
 	if ((pci_request_regions(pdev, DRV_NAME))) {
-		printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
+		netdev_err(dev, "Cannot obtain PCI resources, aborting.\n");
 		goto out_free_netdev_2;
 	}
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		printk(KERN_ERR "No usable DMA configuration, aborting.\n");
+		netdev_err(dev, "No usable DMA configuration, aborting.\n");
 		goto out_free_regions_3;
 	}
 
 	virt_addr = ioremap(pci_resource_start(pdev, SMSC_BAR),
 		pci_resource_len(pdev, SMSC_BAR));
 	if (!virt_addr) {
-		printk(KERN_ERR "Cannot map device registers, aborting.\n");
+		netdev_err(dev, "Cannot map device registers, aborting.\n");
 		goto out_free_regions_3;
 	}
 
-- 
1.8.3.1

[PATCHv2 net-next 0/7] smsc: replace printk with netdev_ calls

[Ben Boeckel]

Clean up printk calls in smsc network drivers by using netdev_<level>
instead.

I've compile tested them all on x86 by forcing them to at least compile to
catch obvious errors.

Ben Boeckel (7):
  epic100: replace printk with netdev_ calls
  smc91x: replace printk with netdev_ calls
  smc911x: replace printk with netdev_ calls
  smsc911x: replace printk with netdev_ calls
  smc9194: replace printk with netdev_ calls
  smc91c92_cs: replace printk with netdev_ calls
  smsc9420: replace printk with netdev_ calls

 drivers/net/ethernet/smsc/epic100.c     | 121 ++++++------
 drivers/net/ethernet/smsc/smc911x.c     | 331 ++++++++++++++++----------------
 drivers/net/ethernet/smsc/smc911x.h     |   2 +-
 drivers/net/ethernet/smsc/smc9194.c     |  52 +++--
 drivers/net/ethernet/smsc/smc91c92_cs.c |  43 ++---
 drivers/net/ethernet/smsc/smc91x.c      | 237 +++++++++++------------
 drivers/net/ethernet/smsc/smc91x.h      |   4 +-
 drivers/net/ethernet/smsc/smsc911x.c    |   2 +-
 drivers/net/ethernet/smsc/smsc9420.c    |  26 +--
 9 files changed, 400 insertions(+), 418 deletions(-)

-- 
1.8.4.2

[PATCHv2 net-next 1/7] epic100: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/epic100.c | 121 +++++++++++++++++-------------------
 1 file changed, 56 insertions(+), 65 deletions(-)

diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
index 8c5c24a..39b5258 100644
--- a/drivers/net/ethernet/smsc/epic100.c
+++ b/drivers/net/ethernet/smsc/epic100.c
@@ -91,9 +91,9 @@ static int rx_copybreak;
 
 /* These identify the driver base version and may not be removed. */
 static char version[] =
-DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n";
+DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>";
 static char version2[] =
-"  (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+"  (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
@@ -332,9 +332,7 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 /* when built into the kernel, we only print version if device is found */
 #ifndef MODULE
-	static int printed_version;
-	if (!printed_version++)
-		printk(KERN_INFO "%s%s", version, version2);
+	pr_info_once("%s%s\n", version, version2);
 #endif
 
 	card_idx++;
@@ -423,9 +421,9 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		((__le16 *)dev->dev_addr)[i] = cpu_to_le16(er16(LAN0 + i*4));
 
 	if (debug > 2) {
-		dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n");
+		dev_dbg(&pdev->dev, "EEPROM contents:\n");
 		for (i = 0; i < 64; i++)
-			printk(" %4.4x%s", read_eeprom(ep, i),
+			pr_cont(" %4.4x%s", read_eeprom(ep, i),
 				   i % 16 == 15 ? "\n" : "");
 	}
 
@@ -490,8 +488,8 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret < 0)
 		goto err_out_unmap_rx;
 
-	printk(KERN_INFO "%s: %s at %lx, IRQ %d, %pM\n",
-	       dev->name, pci_id_tbl[chip_idx].name,
+	netdev_info(dev, "%s at %lx, IRQ %d, %pM\n",
+	       pci_id_tbl[chip_idx].name,
 	       (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
 	       dev->dev_addr);
 
@@ -703,9 +701,8 @@ static int epic_open(struct net_device *dev)
 			mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
 		if (dev->if_port == 1) {
 			if (debug > 1)
-				printk(KERN_INFO "%s: Using the 10base2 transceiver, MII "
-					   "status %4.4x.\n",
-					   dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));
+				netdev_info(dev, "Using the 10base2 transceiver, MII status %4.4x.\n",
+					    mdio_read(dev, ep->phys[0], MII_BMSR));
 		}
 	} else {
 		int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA);
@@ -715,10 +712,10 @@ static int epic_open(struct net_device *dev)
 			else if (! (mii_lpa & LPA_LPACK))
 				mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
 			if (debug > 1)
-				printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d"
-					   " register read of %4.4x.\n", dev->name,
-					   ep->mii.full_duplex ? "full" : "half",
-					   ep->phys[0], mii_lpa);
+				netdev_info(dev, "Setting %s-duplex based on MII xcvr %d register read of %4.4x.\n",
+					    ep->mii.full_duplex ? "full"
+								: "half",
+					    ep->phys[0], mii_lpa);
 		}
 	}
 
@@ -738,10 +735,9 @@ static int epic_open(struct net_device *dev)
 	     TxUnderrun);
 
 	if (debug > 1) {
-		printk(KERN_DEBUG "%s: epic_open() ioaddr %p IRQ %d "
-		       "status %4.4x %s-duplex.\n",
-		       dev->name, ioaddr, irq, er32(GENCTL),
-		       ep->mii.full_duplex ? "full" : "half");
+		netdev_dbg(dev, "epic_open() ioaddr %p IRQ %d status %4.4x %s-duplex.\n",
+			   ioaddr, irq, er32(GENCTL),
+			   ep->mii.full_duplex ? "full" : "half");
 	}
 
 	/* Set the timer to switch to check for link beat and perhaps switch
@@ -790,8 +786,8 @@ static void epic_restart(struct net_device *dev)
 	/* Soft reset the chip. */
 	ew32(GENCTL, 0x4001);
 
-	printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
-		   dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
+	netdev_dbg(dev, "Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
+		   ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
 	udelay(1);
 
 	/* This magic is documented in SMSC app note 7.15 */
@@ -827,9 +823,8 @@ static void epic_restart(struct net_device *dev)
 	     ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
 	     TxUnderrun);
 
-	printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
-		   " interrupt %4.4x.\n",
-		   dev->name, er32(COMMAND), er32(GENCTL), er32(INTSTAT));
+	netdev_dbg(dev, "epic_restart() done, cmd status %4.4x, ctl %4.4x interrupt %4.4x.\n",
+		   er32(COMMAND), er32(GENCTL), er32(INTSTAT));
 }
 
 static void check_media(struct net_device *dev)
@@ -846,9 +841,9 @@ static void check_media(struct net_device *dev)
 		return;
 	if (ep->mii.full_duplex != duplex) {
 		ep->mii.full_duplex = duplex;
-		printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link"
-			   " partner capability of %4.4x.\n", dev->name,
-			   ep->mii.full_duplex ? "full" : "half", ep->phys[0], mii_lpa);
+		netdev_info(dev, "Setting %s-duplex based on MII #%d link partner capability of %4.4x.\n",
+			    ep->mii.full_duplex ? "full" : "half",
+			    ep->phys[0], mii_lpa);
 		ew32(TxCtrl, ep->mii.full_duplex ? 0x7F : 0x79);
 	}
 }
@@ -861,11 +856,10 @@ static void epic_timer(unsigned long data)
 	int next_tick = 5*HZ;
 
 	if (debug > 3) {
-		printk(KERN_DEBUG "%s: Media monitor tick, Tx status %8.8x.\n",
-		       dev->name, er32(TxSTAT));
-		printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x "
-		       "IntStatus %4.4x RxStatus %4.4x.\n", dev->name,
-		       er32(INTMASK), er32(INTSTAT), er32(RxSTAT));
+		netdev_dbg(dev, "Media monitor tick, Tx status %8.8x.\n",
+			   er32(TxSTAT));
+		netdev_dbg(dev, "Other registers are IntMask %4.4x IntStatus %4.4x RxStatus %4.4x.\n",
+			   er32(INTMASK), er32(INTSTAT), er32(RxSTAT));
 	}
 
 	check_media(dev);
@@ -880,11 +874,11 @@ static void epic_tx_timeout(struct net_device *dev)
 	void __iomem *ioaddr = ep->ioaddr;
 
 	if (debug > 0) {
-		printk(KERN_WARNING "%s: Transmit timeout using MII device, "
-		       "Tx status %4.4x.\n", dev->name, er16(TxSTAT));
+		netdev_warn(dev, "Transmit timeout using MII device, Tx status %4.4x.\n",
+			    er16(TxSTAT));
 		if (debug > 1) {
-			printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
-				   dev->name, ep->dirty_tx, ep->cur_tx);
+			netdev_dbg(dev, "Tx indices: dirty_tx %d, cur_tx %d.\n",
+				   ep->dirty_tx, ep->cur_tx);
 		}
 	}
 	if (er16(TxSTAT) & 0x10) {		/* Tx FIFO underflow. */
@@ -994,9 +988,8 @@ static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	ew32(COMMAND, TxQueued);
 
 	if (debug > 4)
-		printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, "
-		       "flag %2.2x Tx status %8.8x.\n", dev->name, skb->len,
-		       entry, ctrl_word, er32(TxSTAT));
+		netdev_dbg(dev, "Queued Tx packet size %d to slot %d, flag %2.2x Tx status %8.8x.\n",
+			   skb->len, entry, ctrl_word, er32(TxSTAT));
 
 	return NETDEV_TX_OK;
 }
@@ -1009,8 +1002,8 @@ static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
 #ifndef final_version
 	/* There was an major error, log it. */
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
-		       dev->name, status);
+		netdev_dbg(dev, "Transmit error, Tx status %8.8x.\n",
+			   status);
 #endif
 	stats->tx_errors++;
 	if (status & 0x1050)
@@ -1057,9 +1050,8 @@ static void epic_tx(struct net_device *dev, struct epic_private *ep)
 
 #ifndef final_version
 	if (cur_tx - dirty_tx > TX_RING_SIZE) {
-		printk(KERN_WARNING
-		       "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
-		       dev->name, dirty_tx, cur_tx, ep->tx_full);
+		netdev_warn(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
+			    dirty_tx, cur_tx, ep->tx_full);
 		dirty_tx += TX_RING_SIZE;
 	}
 #endif
@@ -1086,8 +1078,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 	ew32(INTSTAT, status & EpicNormalEvent);
 
 	if (debug > 4) {
-		printk(KERN_DEBUG "%s: Interrupt, status=%#8.8x new "
-		       "intstat=%#8.8x.\n", dev->name, status, er32(INTSTAT));
+		netdev_dbg(dev, "Interrupt, status=%#8.8x new intstat=%#8.8x.\n",
+			   status, er32(INTSTAT));
 	}
 
 	if ((status & IntrSummary) == 0)
@@ -1125,8 +1117,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 			ew32(COMMAND, RestartTx);
 		}
 		if (status & PCIBusErr170) {
-			printk(KERN_ERR "%s: PCI Bus Error! status %4.4x.\n",
-					 dev->name, status);
+			netdev_err(dev, "PCI Bus Error! status %4.4x.\n",
+				   status);
 			epic_pause(dev);
 			epic_restart(dev);
 		}
@@ -1136,8 +1128,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 
 out:
 	if (debug > 3) {
-		printk(KERN_DEBUG "%s: exit interrupt, intr_status=%#4.4x.\n",
-				   dev->name, status);
+		netdev_dbg(dev, "exit interrupt, intr_status=%#4.4x.\n",
+			   status);
 	}
 
 	return IRQ_RETVAL(handled);
@@ -1151,7 +1143,7 @@ static int epic_rx(struct net_device *dev, int budget)
 	int work_done = 0;
 
 	if (debug > 4)
-		printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry,
+		netdev_dbg(dev, " In epic_rx(), entry %d %8.8x.\n", entry,
 			   ep->rx_ring[entry].rxstatus);
 
 	if (rx_work_limit > budget)
@@ -1162,16 +1154,17 @@ static int epic_rx(struct net_device *dev, int budget)
 		int status = ep->rx_ring[entry].rxstatus;
 
 		if (debug > 4)
-			printk(KERN_DEBUG "  epic_rx() status was %8.8x.\n", status);
+			netdev_dbg(dev, "  epic_rx() status was %8.8x.\n",
+				   status);
 		if (--rx_work_limit < 0)
 			break;
 		if (status & 0x2006) {
 			if (debug > 2)
-				printk(KERN_DEBUG "%s: epic_rx() error status was %8.8x.\n",
-					   dev->name, status);
+				netdev_dbg(dev, "epic_rx() error status was %8.8x.\n",
+					   status);
 			if (status & 0x2000) {
-				printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
-					   "multiple buffers, status %4.4x!\n", dev->name, status);
+				netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %4.4x!\n",
+					    status);
 				dev->stats.rx_length_errors++;
 			} else if (status & 0x0006)
 				/* Rx Frame errors are counted in hardware. */
@@ -1183,9 +1176,8 @@ static int epic_rx(struct net_device *dev, int budget)
 			struct sk_buff *skb;
 
 			if (pkt_len > PKT_BUF_SZ - 4) {
-				printk(KERN_ERR "%s: Oversized Ethernet frame, status %x "
-					   "%d bytes.\n",
-					   dev->name, status, pkt_len);
+				netdev_err(dev, "Oversized Ethernet frame, status %x %d bytes.\n",
+					   status, pkt_len);
 				pkt_len = 1514;
 			}
 			/* Check if the packet is long enough to accept without copying
@@ -1305,8 +1297,8 @@ static int epic_close(struct net_device *dev)
 	napi_disable(&ep->napi);
 
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
-		       dev->name, er32(INTSTAT));
+		netdev_dbg(dev, "Shutting down ethercard, status was %2.2x.\n",
+			   er32(INTSTAT));
 
 	del_timer_sync(&ep->timer);
 
@@ -1324,7 +1316,7 @@ static int epic_close(struct net_device *dev)
 		ep->rx_ring[i].buflength = 0;
 		if (skb) {
 			pci_unmap_single(pdev, ep->rx_ring[i].bufaddr,
-				 	 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
+					 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			dev_kfree_skb(skb);
 		}
 		ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
@@ -1587,8 +1579,7 @@ static int __init epic_init (void)
 {
 /* when a module, this is printed whether or not devices are found in probe */
 #ifdef MODULE
-	printk (KERN_INFO "%s%s",
-		version, version2);
+	pr_info("%s%s\n", version, version2);
 #endif
 
 	return pci_register_driver(&epic_driver);
-- 
1.8.4.2

Re: [PATCHv2 net-next 1/7] epic100: replace printk with netdev_ calls

[Joe Perches]

On Fri, 2013-11-01 at 00:27 -0400, Ben Boeckel wrote:
> Signed-off-by: Ben Boeckel <mathstuf@gmail.com>

Nice (really, nicely done!) but:

> diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
[]
> @@ -1324,7 +1316,7 @@ static int epic_close(struct net_device *dev)
>  		ep->rx_ring[i].buflength = 0;
>  		if (skb) {
>  			pci_unmap_single(pdev, ep->rx_ring[i].bufaddr,
> -				 	 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
> +					 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);

Please either mention the whitespace changes in the
changelog or don't do them in the same patch.

[PATCHv2 net-next 2/7] smc91x: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc91x.c | 237 ++++++++++++++++++-------------------
 drivers/net/ethernet/smsc/smc91x.h |   4 +-
 2 files changed, 118 insertions(+), 123 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 73be7f3..0c9b5d9 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -58,7 +58,7 @@
  *   22/09/04  Nicolas Pitre      big update (see commit log for details)
  */
 static const char version[] =
-	"smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>\n";
+	"smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>";
 
 /* Debugging level */
 #ifndef SMC_DEBUG
@@ -149,16 +149,16 @@ MODULE_ALIAS("platform:smc91x");
 #define MII_DELAY		1
 
 #if SMC_DEBUG > 0
-#define DBG(n, args...)					\
+#define DBG(n, dev, args...)				\
 	do {						\
 		if (SMC_DEBUG >= (n))			\
-			printk(args);	\
+			netdev_dbg(dev, args);		\
 	} while (0)
 
-#define PRINTK(args...)   printk(args)
+#define PRINTK(dev, args...)   netdev_info(dev, args)
 #else
-#define DBG(n, args...)   do { } while(0)
-#define PRINTK(args...)   printk(KERN_DEBUG args)
+#define DBG(n, dev, args...)   do { } while (0)
+#define PRINTK(dev, args...)   netdev_dbg(dev, args)
 #endif
 
 #if SMC_DEBUG > 3
@@ -173,24 +173,26 @@ static void PRINT_PKT(u_char *buf, int length)
 
 	for (i = 0; i < lines ; i ++) {
 		int cur;
+		printk(KERN_DEBUG);
 		for (cur = 0; cur < 8; cur++) {
 			u_char a, b;
 			a = *buf++;
 			b = *buf++;
-			printk("%02x%02x ", a, b);
+			pr_cont("%02x%02x ", a, b);
 		}
-		printk("\n");
+		pr_cont("\n");
 	}
+	printk(KERN_DEBUG);
 	for (i = 0; i < remainder/2 ; i++) {
 		u_char a, b;
 		a = *buf++;
 		b = *buf++;
-		printk("%02x%02x ", a, b);
+		pr_cont("%02x%02x ", a, b);
 	}
-	printk("\n");
+	pr_cont("\n");
 }
 #else
-#define PRINT_PKT(x...)  do { } while(0)
+#define PRINT_PKT(x...)  do { } while (0)
 #endif
 
 
@@ -226,8 +228,8 @@ static void PRINT_PKT(u_char *buf, int length)
 		unsigned long timeout = jiffies + 2;			\
 		while (SMC_GET_MMU_CMD(lp) & MC_BUSY) {		\
 			if (time_after(jiffies, timeout)) {		\
-				printk("%s: timeout %s line %d\n",	\
-					dev->name, __FILE__, __LINE__);	\
+				netdev_dbg(dev, "timeout %s line %d\n",	\
+					   __FILE__, __LINE__);		\
 				break;					\
 			}						\
 			cpu_relax();					\
@@ -246,7 +248,7 @@ static void smc_reset(struct net_device *dev)
 	unsigned int ctl, cfg;
 	struct sk_buff *pending_skb;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	/* Disable all interrupts, block TX tasklet */
 	spin_lock_irq(&lp->lock);
@@ -339,7 +341,7 @@ static void smc_enable(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	int mask;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	/* see the header file for options in TCR/RCR DEFAULT */
 	SMC_SELECT_BANK(lp, 0);
@@ -373,7 +375,7 @@ static void smc_shutdown(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	struct sk_buff *pending_skb;
 
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
+	DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
 
 	/* no more interrupts for me */
 	spin_lock_irq(&lp->lock);
@@ -406,11 +408,11 @@ static inline void  smc_rcv(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	unsigned int packet_number, status, packet_len;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	packet_number = SMC_GET_RXFIFO(lp);
 	if (unlikely(packet_number & RXFIFO_REMPTY)) {
-		PRINTK("%s: smc_rcv with nothing on FIFO.\n", dev->name);
+		PRINTK(dev, "smc_rcv with nothing on FIFO.\n");
 		return;
 	}
 
@@ -420,9 +422,8 @@ static inline void  smc_rcv(struct net_device *dev)
 	/* First two words are status and packet length */
 	SMC_GET_PKT_HDR(lp, status, packet_len);
 	packet_len &= 0x07ff;  /* mask off top bits */
-	DBG(2, "%s: RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
-		dev->name, packet_number, status,
-		packet_len, packet_len);
+	DBG(2, dev, "RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
+	    packet_number, status, packet_len, packet_len);
 
 	back:
 	if (unlikely(packet_len < 6 || status & RS_ERRORS)) {
@@ -433,8 +434,8 @@ static inline void  smc_rcv(struct net_device *dev)
 		}
 		if (packet_len < 6) {
 			/* bloody hardware */
-			printk(KERN_ERR "%s: fubar (rxlen %u status %x\n",
-					dev->name, packet_len, status);
+			netdev_err(dev, "fubar (rxlen %u status %x\n",
+				   packet_len, status);
 			status |= RS_TOOSHORT;
 		}
 		SMC_WAIT_MMU_BUSY(lp);
@@ -551,7 +552,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 	unsigned char *buf;
 	unsigned long flags;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	if (!smc_special_trylock(&lp->lock, flags)) {
 		netif_stop_queue(dev);
@@ -568,7 +569,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 
 	packet_no = SMC_GET_AR(lp);
 	if (unlikely(packet_no & AR_FAILED)) {
-		printk("%s: Memory allocation failed.\n", dev->name);
+		netdev_err(dev, "Memory allocation failed.\n");
 		dev->stats.tx_errors++;
 		dev->stats.tx_fifo_errors++;
 		smc_special_unlock(&lp->lock, flags);
@@ -581,8 +582,8 @@ static void smc_hardware_send_pkt(unsigned long data)
 
 	buf = skb->data;
 	len = skb->len;
-	DBG(2, "%s: TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n",
-		dev->name, packet_no, len, len, buf);
+	DBG(2, dev, "TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n",
+	    packet_no, len, len, buf);
 	PRINT_PKT(buf, len);
 
 	/*
@@ -637,7 +638,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int numPages, poll_count, status;
 	unsigned long flags;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	BUG_ON(lp->pending_tx_skb != NULL);
 
@@ -654,7 +655,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	numPages = ((skb->len & ~1) + (6 - 1)) >> 8;
 	if (unlikely(numPages > 7)) {
-		printk("%s: Far too big packet error.\n", dev->name);
+		netdev_warn(dev, "Far too big packet error.\n");
 		dev->stats.tx_errors++;
 		dev->stats.tx_dropped++;
 		dev_kfree_skb(skb);
@@ -685,7 +686,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
    	if (!poll_count) {
 		/* oh well, wait until the chip finds memory later */
 		netif_stop_queue(dev);
-		DBG(2, "%s: TX memory allocation deferred.\n", dev->name);
+		DBG(2, dev, "TX memory allocation deferred.\n");
 		SMC_ENABLE_INT(lp, IM_ALLOC_INT);
    	} else {
 		/*
@@ -709,12 +710,12 @@ static void smc_tx(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	unsigned int saved_packet, packet_no, tx_status, pkt_len;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	/* If the TX FIFO is empty then nothing to do */
 	packet_no = SMC_GET_TXFIFO(lp);
 	if (unlikely(packet_no & TXFIFO_TEMPTY)) {
-		PRINTK("%s: smc_tx with nothing on FIFO.\n", dev->name);
+		PRINTK(dev, "smc_tx with nothing on FIFO.\n");
 		return;
 	}
 
@@ -725,8 +726,8 @@ static void smc_tx(struct net_device *dev)
 	/* read the first word (status word) from this packet */
 	SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ);
 	SMC_GET_PKT_HDR(lp, tx_status, pkt_len);
-	DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n",
-		dev->name, tx_status, packet_no);
+	DBG(2, dev, "TX STATUS 0x%04x PNR 0x%02x\n",
+	    tx_status, packet_no);
 
 	if (!(tx_status & ES_TX_SUC))
 		dev->stats.tx_errors++;
@@ -735,14 +736,12 @@ static void smc_tx(struct net_device *dev)
 		dev->stats.tx_carrier_errors++;
 
 	if (tx_status & (ES_LATCOL | ES_16COL)) {
-		PRINTK("%s: %s occurred on last xmit\n", dev->name,
+		PRINTK(dev, "%s occurred on last xmit\n",
 		       (tx_status & ES_LATCOL) ?
 			"late collision" : "too many collisions");
 		dev->stats.tx_window_errors++;
 		if (!(dev->stats.tx_window_errors & 63) && net_ratelimit()) {
-			printk(KERN_INFO "%s: unexpectedly large number of "
-			       "bad collisions. Please check duplex "
-			       "setting.\n", dev->name);
+			netdev_info(dev, "unexpectedly large number of bad collisions. Please check duplex setting.\n");
 		}
 	}
 
@@ -830,8 +829,8 @@ static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg)
 	/* Return to idle state */
 	SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
 
-	DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-		__func__, phyaddr, phyreg, phydata);
+	DBG(3, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+	    __func__, phyaddr, phyreg, phydata);
 
 	SMC_SELECT_BANK(lp, 2);
 	return phydata;
@@ -857,8 +856,8 @@ static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg,
 	/* Return to idle state */
 	SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
 
-	DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-		__func__, phyaddr, phyreg, phydata);
+	DBG(3, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+	    __func__, phyaddr, phyreg, phydata);
 
 	SMC_SELECT_BANK(lp, 2);
 }
@@ -871,7 +870,7 @@ static void smc_phy_detect(struct net_device *dev)
 	struct smc_local *lp = netdev_priv(dev);
 	int phyaddr;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	lp->phy_type = 0;
 
@@ -886,8 +885,8 @@ static void smc_phy_detect(struct net_device *dev)
 		id1 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID1);
 		id2 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID2);
 
-		DBG(3, "%s: phy_id1=0x%x, phy_id2=0x%x\n",
-			dev->name, id1, id2);
+		DBG(3, dev, "phy_id1=0x%x, phy_id2=0x%x\n",
+		    id1, id2);
 
 		/* Make sure it is a valid identifier */
 		if (id1 != 0x0000 && id1 != 0xffff && id1 != 0x8000 &&
@@ -910,7 +909,7 @@ static int smc_phy_fixed(struct net_device *dev)
 	int phyaddr = lp->mii.phy_id;
 	int bmcr, cfg1;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	/* Enter Link Disable state */
 	cfg1 = smc_phy_read(dev, phyaddr, PHY_CFG1_REG);
@@ -1044,7 +1043,7 @@ static void smc_phy_configure(struct work_struct *work)
 	int my_ad_caps; /* My Advertised capabilities */
 	int status;
 
-	DBG(3, "%s:smc_program_phy()\n", dev->name);
+	DBG(3, dev, "smc_program_phy()\n");
 
 	spin_lock_irq(&lp->lock);
 
@@ -1055,7 +1054,7 @@ static void smc_phy_configure(struct work_struct *work)
 		goto smc_phy_configure_exit;
 
 	if (smc_phy_reset(dev, phyaddr)) {
-		printk("%s: PHY reset timed out\n", dev->name);
+		netdev_info(dev, "PHY reset timed out\n");
 		goto smc_phy_configure_exit;
 	}
 
@@ -1082,7 +1081,7 @@ static void smc_phy_configure(struct work_struct *work)
 	my_phy_caps = smc_phy_read(dev, phyaddr, MII_BMSR);
 
 	if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
-		printk(KERN_INFO "Auto negotiation NOT supported\n");
+		netdev_info(dev, "Auto negotiation NOT supported\n");
 		smc_phy_fixed(dev);
 		goto smc_phy_configure_exit;
 	}
@@ -1118,8 +1117,8 @@ static void smc_phy_configure(struct work_struct *work)
 	 */
 	status = smc_phy_read(dev, phyaddr, MII_ADVERTISE);
 
-	DBG(2, "%s: phy caps=%x\n", dev->name, my_phy_caps);
-	DBG(2, "%s: phy advertised caps=%x\n", dev->name, my_ad_caps);
+	DBG(2, dev, "phy caps=%x\n", my_phy_caps);
+	DBG(2, dev, "phy advertised caps=%x\n", my_ad_caps);
 
 	/* Restart auto-negotiation process in order to advertise my caps */
 	smc_phy_write(dev, phyaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
@@ -1143,7 +1142,7 @@ static void smc_phy_interrupt(struct net_device *dev)
 	int phyaddr = lp->mii.phy_id;
 	int phy18;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	if (lp->phy_type == 0)
 		return;
@@ -1179,8 +1178,8 @@ static void smc_10bt_check_media(struct net_device *dev, int init)
 			netif_carrier_on(dev);
 		}
 		if (netif_msg_link(lp))
-			printk(KERN_INFO "%s: link %s\n", dev->name,
-			       new_carrier ? "up" : "down");
+			netdev_info(dev, "link %s\n",
+				    new_carrier ? "up" : "down");
 	}
 }
 
@@ -1211,7 +1210,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 	int status, mask, timeout, card_stats;
 	int saved_pointer;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	spin_lock(&lp->lock);
 
@@ -1230,12 +1229,12 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 	do {
 		status = SMC_GET_INT(lp);
 
-		DBG(2, "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
-			dev->name, status, mask,
-			({ int meminfo; SMC_SELECT_BANK(lp, 0);
-			   meminfo = SMC_GET_MIR(lp);
-			   SMC_SELECT_BANK(lp, 2); meminfo; }),
-			SMC_GET_FIFO(lp));
+		DBG(2, dev, "INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
+		    status, mask,
+		    ({ int meminfo; SMC_SELECT_BANK(lp, 0);
+		       meminfo = SMC_GET_MIR(lp);
+		       SMC_SELECT_BANK(lp, 2); meminfo; }),
+		    SMC_GET_FIFO(lp));
 
 		status &= mask;
 		if (!status)
@@ -1243,20 +1242,20 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 
 		if (status & IM_TX_INT) {
 			/* do this before RX as it will free memory quickly */
-			DBG(3, "%s: TX int\n", dev->name);
+			DBG(3, dev, "TX int\n");
 			smc_tx(dev);
 			SMC_ACK_INT(lp, IM_TX_INT);
 			if (THROTTLE_TX_PKTS)
 				netif_wake_queue(dev);
 		} else if (status & IM_RCV_INT) {
-			DBG(3, "%s: RX irq\n", dev->name);
+			DBG(3, dev, "RX irq\n");
 			smc_rcv(dev);
 		} else if (status & IM_ALLOC_INT) {
-			DBG(3, "%s: Allocation irq\n", dev->name);
+			DBG(3, dev, "Allocation irq\n");
 			tasklet_hi_schedule(&lp->tx_task);
 			mask &= ~IM_ALLOC_INT;
 		} else if (status & IM_TX_EMPTY_INT) {
-			DBG(3, "%s: TX empty\n", dev->name);
+			DBG(3, dev, "TX empty\n");
 			mask &= ~IM_TX_EMPTY_INT;
 
 			/* update stats */
@@ -1271,10 +1270,10 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 			/* multiple collisions */
 			dev->stats.collisions += card_stats & 0xF;
 		} else if (status & IM_RX_OVRN_INT) {
-			DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name,
-			       ({ int eph_st; SMC_SELECT_BANK(lp, 0);
-				  eph_st = SMC_GET_EPH_STATUS(lp);
-				  SMC_SELECT_BANK(lp, 2); eph_st; }));
+			DBG(1, dev, "RX overrun (EPH_ST 0x%04x)\n",
+			    ({ int eph_st; SMC_SELECT_BANK(lp, 0);
+			       eph_st = SMC_GET_EPH_STATUS(lp);
+			       SMC_SELECT_BANK(lp, 2); eph_st; }));
 			SMC_ACK_INT(lp, IM_RX_OVRN_INT);
 			dev->stats.rx_errors++;
 			dev->stats.rx_fifo_errors++;
@@ -1285,7 +1284,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 			smc_phy_interrupt(dev);
 		} else if (status & IM_ERCV_INT) {
 			SMC_ACK_INT(lp, IM_ERCV_INT);
-			PRINTK("%s: UNSUPPORTED: ERCV INTERRUPT\n", dev->name);
+			PRINTK(dev, "UNSUPPORTED: ERCV INTERRUPT\n");
 		}
 	} while (--timeout);
 
@@ -1296,11 +1295,11 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 
 #ifndef CONFIG_NET_POLL_CONTROLLER
 	if (timeout == MAX_IRQ_LOOPS)
-		PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
-		       dev->name, mask);
+		PRINTK(dev, "spurious interrupt (mask = 0x%02x)\n",
+		       mask);
 #endif
-	DBG(3, "%s: Interrupt done (%d loops)\n",
-	       dev->name, MAX_IRQ_LOOPS - timeout);
+	DBG(3, dev, "Interrupt done (%d loops)\n",
+	    MAX_IRQ_LOOPS - timeout);
 
 	/*
 	 * We return IRQ_HANDLED unconditionally here even if there was
@@ -1333,7 +1332,7 @@ static void smc_timeout(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	int status, mask, eph_st, meminfo, fifo;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	spin_lock_irq(&lp->lock);
 	status = SMC_GET_INT(lp);
@@ -1344,9 +1343,8 @@ static void smc_timeout(struct net_device *dev)
 	meminfo = SMC_GET_MIR(lp);
 	SMC_SELECT_BANK(lp, 2);
 	spin_unlock_irq(&lp->lock);
-	PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x "
-		"MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
-		dev->name, status, mask, meminfo, fifo, eph_st );
+	PRINTK(dev, "TX timeout (INT 0x%02x INTMASK 0x%02x MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
+	       status, mask, meminfo, fifo, eph_st);
 
 	smc_reset(dev);
 	smc_enable(dev);
@@ -1377,10 +1375,10 @@ static void smc_set_multicast_list(struct net_device *dev)
 	unsigned char multicast_table[8];
 	int update_multicast = 0;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	if (dev->flags & IFF_PROMISC) {
-		DBG(2, "%s: RCR_PRMS\n", dev->name);
+		DBG(2, dev, "RCR_PRMS\n");
 		lp->rcr_cur_mode |= RCR_PRMS;
 	}
 
@@ -1395,7 +1393,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 	 * checked before the table is
 	 */
 	else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
-		DBG(2, "%s: RCR_ALMUL\n", dev->name);
+		DBG(2, dev, "RCR_ALMUL\n");
 		lp->rcr_cur_mode |= RCR_ALMUL;
 	}
 
@@ -1437,7 +1435,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 		/* now, the table can be loaded into the chipset */
 		update_multicast = 1;
 	} else  {
-		DBG(2, "%s: ~(RCR_PRMS|RCR_ALMUL)\n", dev->name);
+		DBG(2, dev, "~(RCR_PRMS|RCR_ALMUL)\n");
 		lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
 
 		/*
@@ -1470,7 +1468,7 @@ smc_open(struct net_device *dev)
 {
 	struct smc_local *lp = netdev_priv(dev);
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	/* Setup the default Register Modes */
 	lp->tcr_cur_mode = TCR_DEFAULT;
@@ -1514,7 +1512,7 @@ static int smc_close(struct net_device *dev)
 {
 	struct smc_local *lp = netdev_priv(dev);
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);
@@ -1694,7 +1692,7 @@ static int smc_ethtool_geteeprom(struct net_device *dev,
 	int i;
 	int imax;
 
-	DBG(1, "Reading %d bytes at %d(0x%x)\n",
+	DBG(1, dev, "Reading %d bytes at %d(0x%x)\n",
 		eeprom->len, eeprom->offset, eeprom->offset);
 	imax = smc_ethtool_geteeprom_len(dev);
 	for (i = 0; i < eeprom->len; i += 2) {
@@ -1706,7 +1704,7 @@ static int smc_ethtool_geteeprom(struct net_device *dev,
 		ret = smc_read_eeprom_word(dev, offset >> 1, &wbuf);
 		if (ret != 0)
 			return ret;
-		DBG(2, "Read 0x%x from 0x%x\n", wbuf, offset >> 1);
+		DBG(2, dev, "Read 0x%x from 0x%x\n", wbuf, offset >> 1);
 		data[i] = (wbuf >> 8) & 0xff;
 		data[i+1] = wbuf & 0xff;
 	}
@@ -1719,8 +1717,8 @@ static int smc_ethtool_seteeprom(struct net_device *dev,
 	int i;
 	int imax;
 
-	DBG(1, "Writing %d bytes to %d(0x%x)\n",
-			eeprom->len, eeprom->offset, eeprom->offset);
+	DBG(1, dev, "Writing %d bytes to %d(0x%x)\n",
+	    eeprom->len, eeprom->offset, eeprom->offset);
 	imax = smc_ethtool_geteeprom_len(dev);
 	for (i = 0; i < eeprom->len; i += 2) {
 		int ret;
@@ -1729,7 +1727,7 @@ static int smc_ethtool_seteeprom(struct net_device *dev,
 		if (offset > imax)
 			break;
 		wbuf = (data[i] << 8) | data[i + 1];
-		DBG(2, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1);
+		DBG(2, dev, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1);
 		ret = smc_write_eeprom_word(dev, offset >> 1, wbuf);
 		if (ret != 0)
 			return ret;
@@ -1784,7 +1782,7 @@ static int smc_findirq(struct smc_local *lp)
 	int timeout = 20;
 	unsigned long cookie;
 
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
+	DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
 
 	cookie = probe_irq_on();
 
@@ -1856,21 +1854,21 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 		     unsigned long irq_flags)
 {
 	struct smc_local *lp = netdev_priv(dev);
-	static int version_printed = 0;
 	int retval;
 	unsigned int val, revision_register;
 	const char *version_string;
 
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
+	DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
 
 	/* First, see if the high byte is 0x33 */
 	val = SMC_CURRENT_BANK(lp);
-	DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val);
+	DBG(2, dev, "%s: bank signature probe returned 0x%04x\n",
+	    CARDNAME, val);
 	if ((val & 0xFF00) != 0x3300) {
 		if ((val & 0xFF) == 0x33) {
-			printk(KERN_WARNING
-				"%s: Detected possible byte-swapped interface"
-				" at IOADDR %p\n", CARDNAME, ioaddr);
+			netdev_warn(dev,
+				    "%s: Detected possible byte-swapped interface at IOADDR %p\n",
+				    CARDNAME, ioaddr);
 		}
 		retval = -ENODEV;
 		goto err_out;
@@ -1897,8 +1895,8 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	val = SMC_GET_BASE(lp);
 	val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
 	if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
-		printk("%s: IOADDR %p doesn't match configuration (%x).\n",
-			CARDNAME, ioaddr, val);
+		netdev_warn(dev, "%s: IOADDR %p doesn't match configuration (%x).\n",
+			    CARDNAME, ioaddr, val);
 	}
 
 	/*
@@ -1908,21 +1906,19 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	 */
 	SMC_SELECT_BANK(lp, 3);
 	revision_register = SMC_GET_REV(lp);
-	DBG(2, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
+	DBG(2, dev, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
 	version_string = chip_ids[ (revision_register >> 4) & 0xF];
 	if (!version_string || (revision_register & 0xff00) != 0x3300) {
 		/* I don't recognize this chip, so... */
-		printk("%s: IO %p: Unrecognized revision register 0x%04x"
-			", Contact author.\n", CARDNAME,
-			ioaddr, revision_register);
+		netdev_warn(dev, "%s: IO %p: Unrecognized revision register 0x%04x, Contact author.\n",
+			    CARDNAME, ioaddr, revision_register);
 
 		retval = -ENODEV;
 		goto err_out;
 	}
 
 	/* At this point I'll assume that the chip is an SMC91x. */
-	if (version_printed++ == 0)
-		printk("%s", version);
+	pr_info_once("%s\n", version);
 
 	/* fill in some of the fields */
 	dev->base_addr = (unsigned long)ioaddr;
@@ -1940,7 +1936,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	/*
 	 * If dev->irq is 0, then the device has to be banged on to see
 	 * what the IRQ is.
- 	 *
+	 *
 	 * This banging doesn't always detect the IRQ, for unknown reasons.
 	 * a workaround is to reset the chip and try again.
 	 *
@@ -1965,8 +1961,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 		}
 	}
 	if (dev->irq == 0) {
-		printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
-			dev->name);
+		netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n");
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -2030,32 +2025,31 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	retval = register_netdev(dev);
 	if (retval == 0) {
 		/* now, print out the card info, in a short format.. */
-		printk("%s: %s (rev %d) at %p IRQ %d",
-			dev->name, version_string, revision_register & 0x0f,
-			lp->base, dev->irq);
+		netdev_info(dev, "%s (rev %d) at %p IRQ %d",
+			    version_string, revision_register & 0x0f,
+			    lp->base, dev->irq);
 
 		if (dev->dma != (unsigned char)-1)
-			printk(" DMA %d", dev->dma);
+			pr_cont(" DMA %d", dev->dma);
 
-		printk("%s%s\n",
+		pr_cont("%s%s\n",
 			lp->cfg.flags & SMC91X_NOWAIT ? " [nowait]" : "",
 			THROTTLE_TX_PKTS ? " [throttle_tx]" : "");
 
 		if (!is_valid_ether_addr(dev->dev_addr)) {
-			printk("%s: Invalid ethernet MAC address.  Please "
-			       "set using ifconfig\n", dev->name);
+			netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n");
 		} else {
 			/* Print the Ethernet address */
-			printk("%s: Ethernet addr: %pM\n",
-			       dev->name, dev->dev_addr);
+			netdev_info(dev, "Ethernet addr: %pM\n",
+				    dev->dev_addr);
 		}
 
 		if (lp->phy_type == 0) {
-			PRINTK("%s: No PHY found\n", dev->name);
+			PRINTK(dev, "No PHY found\n");
 		} else if ((lp->phy_type & 0xfffffff0) == 0x0016f840) {
-			PRINTK("%s: PHY LAN83C183 (LAN91C111 Internal)\n", dev->name);
+			PRINTK(dev, "PHY LAN83C183 (LAN91C111 Internal)\n");
 		} else if ((lp->phy_type & 0xfffffff0) == 0x02821c50) {
-			PRINTK("%s: PHY LAN83C180\n", dev->name);
+			PRINTK(dev, "PHY LAN83C180\n");
 		}
 	}
 
@@ -2165,7 +2159,8 @@ static inline void smc_request_datacs(struct platform_device *pdev, struct net_d
 			return;
 
 		if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) {
-			printk(KERN_INFO "%s: failed to request datacs memory region.\n", CARDNAME);
+			netdev_info(ndev, "%s: failed to request datacs memory region.\n",
+				    CARDNAME);
 			return;
 		}
 
@@ -2307,7 +2302,7 @@ static int smc_drv_probe(struct platform_device *pdev)
  out_free_netdev:
 	free_netdev(ndev);
  out:
-	printk("%s: not found (%d).\n", CARDNAME, ret);
+	pr_info("%s: not found (%d).\n", CARDNAME, ret);
 
 	return ret;
 }
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index 98eedb9..c9d4c87 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -907,8 +907,8 @@ static const char * chip_ids[ 16 ] =  {
 	({								\
 		int __b = SMC_CURRENT_BANK(lp);			\
 		if (unlikely((__b & ~0xf0) != (0x3300 | bank))) {	\
-			printk( "%s: bank reg screwed (0x%04x)\n",	\
-				CARDNAME, __b );			\
+			pr_err("%s: bank reg screwed (0x%04x)\n",	\
+			       CARDNAME, __b);				\
 			BUG();						\
 		}							\
 		reg<<SMC_IO_SHIFT;					\
-- 
1.8.4.2

[PATCHv2 net-next 3/7] smc911x: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc911x.c | 331 ++++++++++++++++++------------------
 drivers/net/ethernet/smsc/smc911x.h |   2 +-
 2 files changed, 166 insertions(+), 167 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index afe01c4..0f096a8 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -106,16 +106,16 @@ MODULE_ALIAS("platform:smc911x");
 #define POWER_DOWN		 1
 
 #if SMC_DEBUG > 0
-#define DBG(n, args...)				 \
+#define DBG(n, dev, args...)			 \
 	do {					 \
 		if (SMC_DEBUG & (n))		 \
-			printk(args);		 \
+			netdev_dbg(dev, args);	 \
 	} while (0)
 
-#define PRINTK(args...)   printk(args)
+#define PRINTK(dev, args...)   netdev_info(dev, args)
 #else
-#define DBG(n, args...)   do { } while (0)
-#define PRINTK(args...)   printk(KERN_DEBUG args)
+#define DBG(n, dev, args...)   do { } while (0)
+#define PRINTK(dev, args...)   netdev_dbg(dev, args)
 #endif
 
 #if SMC_DEBUG_PKTS > 0
@@ -130,21 +130,23 @@ static void PRINT_PKT(u_char *buf, int length)
 
 	for (i = 0; i < lines ; i ++) {
 		int cur;
+		printk(KERN_DEBUG);
 		for (cur = 0; cur < 8; cur++) {
 			u_char a, b;
 			a = *buf++;
 			b = *buf++;
-			printk("%02x%02x ", a, b);
+			pr_cont("%02x%02x ", a, b);
 		}
-		printk("\n");
+		pr_cont("\n");
 	}
+	printk(KERN_DEBUG);
 	for (i = 0; i < remainder/2 ; i++) {
 		u_char a, b;
 		a = *buf++;
 		b = *buf++;
-		printk("%02x%02x ", a, b);
+		pr_cont("%02x%02x ", a, b);
 	}
-	printk("\n");
+	pr_cont("\n");
 }
 #else
 #define PRINT_PKT(x...)  do { } while (0)
@@ -176,7 +178,7 @@ static void smc911x_reset(struct net_device *dev)
 	unsigned int reg, timeout=0, resets=1, irq_cfg;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	/*	 Take out of PM setting first */
 	if ((SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_) == 0) {
@@ -188,7 +190,7 @@ static void smc911x_reset(struct net_device *dev)
 			reg = SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_;
 		} while (--timeout && !reg);
 		if (timeout == 0) {
-			PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name);
+			PRINTK(dev, "smc911x_reset timeout waiting for PM restore\n");
 			return;
 		}
 	}
@@ -206,14 +208,14 @@ static void smc911x_reset(struct net_device *dev)
 			reg = SMC_GET_HW_CFG(lp);
 			/* If chip indicates reset timeout then try again */
 			if (reg & HW_CFG_SRST_TO_) {
-				PRINTK("%s: chip reset timeout, retrying...\n", dev->name);
+				PRINTK(dev, "chip reset timeout, retrying...\n");
 				resets++;
 				break;
 			}
 		} while (--timeout && (reg & HW_CFG_SRST_));
 	}
 	if (timeout == 0) {
-		PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name);
+		PRINTK(dev, "smc911x_reset timeout waiting for reset\n");
 		return;
 	}
 
@@ -223,7 +225,7 @@ static void smc911x_reset(struct net_device *dev)
 		udelay(10);
 
 	if (timeout == 0){
-		PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name);
+		PRINTK(dev, "smc911x_reset timeout waiting for EEPROM busy\n");
 		return;
 	}
 
@@ -270,7 +272,7 @@ static void smc911x_enable(struct net_device *dev)
 	unsigned mask, cfg, cr;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 
@@ -296,7 +298,7 @@ static void smc911x_enable(struct net_device *dev)
 
 	/* Turn on receiver and enable RX */
 	if (cr & MAC_CR_RXEN_)
-		DBG(SMC_DEBUG_RX, "%s: Receiver already enabled\n", dev->name);
+		DBG(SMC_DEBUG_RX, dev, "Receiver already enabled\n");
 
 	SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_);
 
@@ -327,7 +329,7 @@ static void smc911x_shutdown(struct net_device *dev)
 	unsigned cr;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", CARDNAME, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "%s: --> %s\n", CARDNAME, __func__);
 
 	/* Disable IRQ's */
 	SMC_SET_INT_EN(lp, 0);
@@ -346,7 +348,8 @@ static inline void smc911x_drop_pkt(struct net_device *dev)
 	struct smc911x_local *lp = netdev_priv(dev);
 	unsigned int fifo_count, timeout, reg;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "%s: --> %s\n",
+	    CARDNAME, __func__);
 	fifo_count = SMC_GET_RX_FIFO_INF(lp) & 0xFFFF;
 	if (fifo_count <= 4) {
 		/* Manually dump the packet data */
@@ -361,7 +364,7 @@ static inline void smc911x_drop_pkt(struct net_device *dev)
 			reg = SMC_GET_RX_DP_CTRL(lp) & RX_DP_CTRL_FFWD_BUSY_;
 		} while (--timeout && reg);
 		if (timeout == 0) {
-			PRINTK("%s: timeout waiting for RX fast forward\n", dev->name);
+			PRINTK(dev, "timeout waiting for RX fast forward\n");
 		}
 	}
 }
@@ -379,11 +382,11 @@ static inline void	 smc911x_rcv(struct net_device *dev)
 	struct sk_buff *skb;
 	unsigned char *data;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n",
-		dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "--> %s\n",
+	    __func__);
 	status = SMC_GET_RX_STS_FIFO(lp);
-	DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x\n",
-		dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff);
+	DBG(SMC_DEBUG_RX, dev, "Rx pkt len %d status 0x%08x\n",
+	    (status & 0x3fff0000) >> 16, status & 0xc000ffff);
 	pkt_len = (status & RX_STS_PKT_LEN_) >> 16;
 	if (status & RX_STS_ES_) {
 		/* Deal with a bad packet */
@@ -403,8 +406,7 @@ static inline void	 smc911x_rcv(struct net_device *dev)
 		/* Alloc a buffer with extra room for DMA alignment */
 		skb = netdev_alloc_skb(dev, pkt_len+32);
 		if (unlikely(skb == NULL)) {
-			PRINTK( "%s: Low memory, rcvd packet dropped.\n",
-				dev->name);
+			PRINTK(dev, "Low memory, rcvd packet dropped.\n");
 			dev->stats.rx_dropped++;
 			smc911x_drop_pkt(dev);
 			return;
@@ -422,8 +424,8 @@ static inline void	 smc911x_rcv(struct net_device *dev)
 		/* Lower the FIFO threshold if possible */
 		fifo = SMC_GET_FIFO_INT(lp);
 		if (fifo & 0xFF) fifo--;
-		DBG(SMC_DEBUG_RX, "%s: Setting RX stat FIFO threshold to %d\n",
-			dev->name, fifo & 0xff);
+		DBG(SMC_DEBUG_RX, dev, "Setting RX stat FIFO threshold to %d\n",
+		    fifo & 0xff);
 		SMC_SET_FIFO_INT(lp, fifo);
 		/* Setup RX DMA */
 		SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_));
@@ -436,7 +438,7 @@ static inline void	 smc911x_rcv(struct net_device *dev)
 		SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_));
 		SMC_PULL_DATA(lp, data, pkt_len+2+3);
 
-		DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name);
+		DBG(SMC_DEBUG_PKTS, dev, "Received packet\n");
 		PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64);
 		skb->protocol = eth_type_trans(skb, dev);
 		netif_rx(skb);
@@ -456,7 +458,7 @@ static void smc911x_hardware_send_pkt(struct net_device *dev)
 	unsigned int cmdA, cmdB, len;
 	unsigned char *buf;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", __func__);
 	BUG_ON(lp->pending_tx_skb == NULL);
 
 	skb = lp->pending_tx_skb;
@@ -481,12 +483,12 @@ static void smc911x_hardware_send_pkt(struct net_device *dev)
 	/* tag is packet length so we can use this in stats update later */
 	cmdB = (skb->len  << 16) | (skb->len & 0x7FF);
 
-	DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
-		 dev->name, len, len, buf, cmdA, cmdB);
+	DBG(SMC_DEBUG_TX, dev, "TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
+	    len, len, buf, cmdA, cmdB);
 	SMC_SET_TX_FIFO(lp, cmdA);
 	SMC_SET_TX_FIFO(lp, cmdB);
 
-	DBG(SMC_DEBUG_PKTS, "%s: Transmitted packet\n", dev->name);
+	DBG(SMC_DEBUG_PKTS, dev, "Transmitted packet\n");
 	PRINT_PKT(buf, len <= 64 ? len : 64);
 
 	/* Send pkt via PIO or DMA */
@@ -517,20 +519,20 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int free;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
-		dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n",
+	    __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 
 	BUG_ON(lp->pending_tx_skb != NULL);
 
 	free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_;
-	DBG(SMC_DEBUG_TX, "%s: TX free space %d\n", dev->name, free);
+	DBG(SMC_DEBUG_TX, dev, "TX free space %d\n", free);
 
 	/* Turn off the flow when running out of space in FIFO */
 	if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) {
-		DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n",
-			dev->name, free);
+		DBG(SMC_DEBUG_TX, dev, "Disabling data flow due to low FIFO space (%d)\n",
+		    free);
 		/* Reenable when at least 1 packet of size MTU present */
 		SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64);
 		lp->tx_throttle = 1;
@@ -545,8 +547,8 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 *	  End padding				 15 bytes
 	 */
 	if (unlikely(free < (skb->len + 8 + 15 + 15))) {
-		printk("%s: No Tx free space %d < %d\n",
-			dev->name, free, skb->len);
+		netdev_warn(dev, "No Tx free space %d < %d\n",
+			    free, skb->len);
 		lp->pending_tx_skb = NULL;
 		dev->stats.tx_errors++;
 		dev->stats.tx_dropped++;
@@ -561,13 +563,13 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		 * the DMA IRQ starts it
 		 */
 		if (lp->txdma_active) {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Tx DMA running, deferring packet\n", dev->name);
+			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Tx DMA running, deferring packet\n");
 			lp->pending_tx_skb = skb;
 			netif_stop_queue(dev);
 			spin_unlock_irqrestore(&lp->lock, flags);
 			return NETDEV_TX_OK;
 		} else {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name);
+			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Activating Tx DMA\n");
 			lp->txdma_active = 1;
 		}
 	}
@@ -589,20 +591,19 @@ static void smc911x_tx(struct net_device *dev)
 	struct smc911x_local *lp = netdev_priv(dev);
 	unsigned int tx_status;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
-		dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n",
+	    __func__);
 
 	/* Collect the TX status */
 	while (((SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16) != 0) {
-		DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n",
-			dev->name,
-			(SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16);
+		DBG(SMC_DEBUG_TX, dev, "Tx stat FIFO used 0x%04x\n",
+		    (SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16);
 		tx_status = SMC_GET_TX_STS_FIFO(lp);
 		dev->stats.tx_packets++;
 		dev->stats.tx_bytes+=tx_status>>16;
-		DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n",
-			dev->name, (tx_status & 0xffff0000) >> 16,
-			tx_status & 0x0000ffff);
+		DBG(SMC_DEBUG_TX, dev, "Tx FIFO tag 0x%04x status 0x%04x\n",
+		    (tx_status & 0xffff0000) >> 16,
+		    tx_status & 0x0000ffff);
 		/* count Tx errors, but ignore lost carrier errors when in
 		 * full-duplex mode */
 		if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx &&
@@ -640,8 +641,8 @@ static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg)
 
 	SMC_GET_MII(lp, phyreg, phyaddr, phydata);
 
-	DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n",
-		__func__, phyaddr, phyreg, phydata);
+	DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n",
+	    __func__, phyaddr, phyreg, phydata);
 	return phydata;
 }
 
@@ -654,8 +655,8 @@ static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg,
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 
-	DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-		__func__, phyaddr, phyreg, phydata);
+	DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+	    __func__, phyaddr, phyreg, phydata);
 
 	SMC_SET_MII(lp, phyreg, phyaddr, phydata);
 }
@@ -670,7 +671,7 @@ static void smc911x_phy_detect(struct net_device *dev)
 	int phyaddr;
 	unsigned int cfg, id1, id2;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	lp->phy_type = 0;
 
@@ -731,8 +732,8 @@ static void smc911x_phy_detect(struct net_device *dev)
 			lp->phy_type = id1 << 16 | id2;
 	}
 
-	DBG(SMC_DEBUG_MISC, "%s: phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
-		dev->name, id1, id2, lp->mii.phy_id);
+	DBG(SMC_DEBUG_MISC, dev, "phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
+	    id1, id2, lp->mii.phy_id);
 }
 
 /*
@@ -745,7 +746,7 @@ static int smc911x_phy_fixed(struct net_device *dev)
 	int phyaddr = lp->mii.phy_id;
 	int bmcr;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	/* Enter Link Disable state */
 	SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
@@ -792,7 +793,7 @@ static int smc911x_phy_reset(struct net_device *dev, int phy)
 	unsigned long flags;
 	unsigned int reg;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 	reg = SMC_GET_PMT_CTRL(lp);
@@ -851,18 +852,18 @@ static void smc911x_phy_check_media(struct net_device *dev, int init)
 	int phyaddr = lp->mii.phy_id;
 	unsigned int bmcr, cr;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
 		/* duplex state has changed */
 		SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
 		SMC_GET_MAC_CR(lp, cr);
 		if (lp->mii.full_duplex) {
-			DBG(SMC_DEBUG_MISC, "%s: Configuring for full-duplex mode\n", dev->name);
+			DBG(SMC_DEBUG_MISC, dev, "Configuring for full-duplex mode\n");
 			bmcr |= BMCR_FULLDPLX;
 			cr |= MAC_CR_RCVOWN_;
 		} else {
-			DBG(SMC_DEBUG_MISC, "%s: Configuring for half-duplex mode\n", dev->name);
+			DBG(SMC_DEBUG_MISC, dev, "Configuring for half-duplex mode\n");
 			bmcr &= ~BMCR_FULLDPLX;
 			cr &= ~MAC_CR_RCVOWN_;
 		}
@@ -891,7 +892,7 @@ static void smc911x_phy_configure(struct work_struct *work)
 	int status;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__);
 
 	/*
 	 * We should not be called if phy_type is zero.
@@ -900,7 +901,7 @@ static void smc911x_phy_configure(struct work_struct *work)
 		return;
 
 	if (smc911x_phy_reset(dev, phyaddr)) {
-		printk("%s: PHY reset timed out\n", dev->name);
+		netdev_info(dev, "PHY reset timed out\n");
 		return;
 	}
 	spin_lock_irqsave(&lp->lock, flags);
@@ -922,7 +923,7 @@ static void smc911x_phy_configure(struct work_struct *work)
 	/* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
 	SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps);
 	if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
-		printk(KERN_INFO "Auto negotiation NOT supported\n");
+		netdev_info(dev, "Auto negotiation NOT supported\n");
 		smc911x_phy_fixed(dev);
 		goto smc911x_phy_configure_exit;
 	}
@@ -960,8 +961,8 @@ static void smc911x_phy_configure(struct work_struct *work)
 	udelay(10);
 	SMC_GET_PHY_MII_ADV(lp, phyaddr, status);
 
-	DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps);
-	DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps);
+	DBG(SMC_DEBUG_MISC, dev, "phy caps=0x%04x\n", my_phy_caps);
+	DBG(SMC_DEBUG_MISC, dev, "phy advertised caps=0x%04x\n", my_ad_caps);
 
 	/* Restart auto-negotiation process in order to advertise my caps */
 	SMC_SET_PHY_BMCR(lp, phyaddr, BMCR_ANENABLE | BMCR_ANRESTART);
@@ -984,7 +985,7 @@ static void smc911x_phy_interrupt(struct net_device *dev)
 	int phyaddr = lp->mii.phy_id;
 	int status;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	if (lp->phy_type == 0)
 		return;
@@ -992,10 +993,10 @@ static void smc911x_phy_interrupt(struct net_device *dev)
 	smc911x_phy_check_media(dev, 0);
 	/* read to clear status bits */
 	SMC_GET_PHY_INT_SRC(lp, phyaddr,status);
-	DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n",
-		dev->name, status & 0xffff);
-	DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n",
-		dev->name, SMC_GET_AFC_CFG(lp));
+	DBG(SMC_DEBUG_MISC, dev, "PHY interrupt status 0x%04x\n",
+	    status & 0xffff);
+	DBG(SMC_DEBUG_MISC, dev, "AFC_CFG 0x%08x\n",
+	    SMC_GET_AFC_CFG(lp));
 }
 
 /*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
@@ -1012,7 +1013,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 	unsigned int rx_overrun=0, cr, pkts;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 
@@ -1033,8 +1034,8 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 	do {
 		status = SMC_GET_INT(lp);
 
-		DBG(SMC_DEBUG_MISC, "%s: INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n",
-			dev->name, status, mask, status & ~mask);
+		DBG(SMC_DEBUG_MISC, dev, "INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n",
+		    status, mask, status & ~mask);
 
 		status &= mask;
 		if (!status)
@@ -1066,7 +1067,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 				SMC_GET_MAC_CR(lp, cr);
 				cr &= ~MAC_CR_RXEN_;
 				SMC_SET_MAC_CR(lp, cr);
-				DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
+				DBG(SMC_DEBUG_RX, dev, "RX overrun\n");
 				dev->stats.rx_errors++;
 				dev->stats.rx_fifo_errors++;
 			}
@@ -1078,7 +1079,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 				cr &= ~MAC_CR_RXEN_;
 				SMC_SET_MAC_CR(lp, cr);
 				rx_overrun=1;
-				DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
+				DBG(SMC_DEBUG_RX, dev, "RX overrun\n");
 				dev->stats.rx_errors++;
 				dev->stats.rx_fifo_errors++;
 			}
@@ -1087,23 +1088,23 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 		/* Handle receive condition */
 		if ((status & INT_STS_RSFL_) || rx_overrun) {
 			unsigned int fifo;
-			DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name);
+			DBG(SMC_DEBUG_RX, dev, "RX irq\n");
 			fifo = SMC_GET_RX_FIFO_INF(lp);
 			pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16;
-			DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n",
-				dev->name, pkts, fifo & 0xFFFF );
+			DBG(SMC_DEBUG_RX, dev, "Rx FIFO pkts %d, bytes %d\n",
+			    pkts, fifo & 0xFFFF);
 			if (pkts != 0) {
 #ifdef SMC_USE_DMA
 				unsigned int fifo;
 				if (lp->rxdma_active){
-					DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
-						"%s: RX DMA active\n", dev->name);
+					DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev,
+					    "RX DMA active\n");
 					/* The DMA is already running so up the IRQ threshold */
 					fifo = SMC_GET_FIFO_INT(lp) & ~0xFF;
 					fifo |= pkts & 0xFF;
-					DBG(SMC_DEBUG_RX,
-						"%s: Setting RX stat FIFO threshold to %d\n",
-						dev->name, fifo & 0xff);
+					DBG(SMC_DEBUG_RX, dev,
+					    "Setting RX stat FIFO threshold to %d\n",
+					    fifo & 0xff);
 					SMC_SET_FIFO_INT(lp, fifo);
 				} else
 #endif
@@ -1113,7 +1114,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 		}
 		/* Handle transmit FIFO available */
 		if (status & INT_STS_TDFA_) {
-			DBG(SMC_DEBUG_TX, "%s: TX data FIFO space available irq\n", dev->name);
+			DBG(SMC_DEBUG_TX, dev, "TX data FIFO space available irq\n");
 			SMC_SET_FIFO_TDA(lp, 0xFF);
 			lp->tx_throttle = 0;
 #ifdef SMC_USE_DMA
@@ -1125,9 +1126,9 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 		/* Handle transmit done condition */
 #if 1
 		if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC,
-				"%s: Tx stat FIFO limit (%d) /GPT irq\n",
-				dev->name, (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16);
+			DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, dev,
+			    "Tx stat FIFO limit (%d) /GPT irq\n",
+			    (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16);
 			smc911x_tx(dev);
 			SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
 			SMC_ACK_INT(lp, INT_STS_TSFL_);
@@ -1135,23 +1136,20 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 		}
 #else
 		if (status & INT_STS_TSFL_) {
-			DBG(SMC_DEBUG_TX, "%s: TX status FIFO limit (%d) irq\n", dev->name, );
+			DBG(SMC_DEBUG_TX, dev, "TX status FIFO limit (%d) irq\n", ?);
 			smc911x_tx(dev);
 			SMC_ACK_INT(lp, INT_STS_TSFL_);
 		}
 
 		if (status & INT_STS_GPT_INT_) {
-			DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
-				dev->name,
-				SMC_GET_IRQ_CFG(lp),
-				SMC_GET_FIFO_INT(lp),
-				SMC_GET_RX_CFG(lp));
-			DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x "
-				"Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
-				dev->name,
-				(SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16,
-				SMC_GET_RX_FIFO_INF(lp) & 0xffff,
-				SMC_GET_RX_STS_FIFO_PEEK(lp));
+			DBG(SMC_DEBUG_RX, dev, "IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
+			    SMC_GET_IRQ_CFG(lp),
+			    SMC_GET_FIFO_INT(lp),
+			    SMC_GET_RX_CFG(lp));
+			DBG(SMC_DEBUG_RX, dev, "Rx Stat FIFO Used 0x%02x Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
+			    (SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16,
+			    SMC_GET_RX_FIFO_INF(lp) & 0xffff,
+			    SMC_GET_RX_STS_FIFO_PEEK(lp));
 			SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
 			SMC_ACK_INT(lp, INT_STS_GPT_INT_);
 		}
@@ -1159,7 +1157,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 
 		/* Handle PHY interrupt condition */
 		if (status & INT_STS_PHY_INT_) {
-			DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name);
+			DBG(SMC_DEBUG_MISC, dev, "PHY irq\n");
 			smc911x_phy_interrupt(dev);
 			SMC_ACK_INT(lp, INT_STS_PHY_INT_);
 		}
@@ -1168,8 +1166,8 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 	/* restore mask state */
 	SMC_SET_INT_EN(lp, mask);
 
-	DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n",
-		dev->name, 8-timeout);
+	DBG(SMC_DEBUG_MISC, dev, "Interrupt done (%d loops)\n",
+	    8-timeout);
 
 	spin_unlock_irqrestore(&lp->lock, flags);
 
@@ -1185,9 +1183,9 @@ smc911x_tx_dma_irq(int dma, void *data)
 	struct sk_buff *skb = lp->current_tx_skb;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
-	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: TX DMA irq handler\n", dev->name);
+	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "TX DMA irq handler\n");
 	/* Clear the DMA interrupt sources */
 	SMC_DMA_ACK_IRQ(dev, dma);
 	BUG_ON(skb == NULL);
@@ -1198,8 +1196,8 @@ smc911x_tx_dma_irq(int dma, void *data)
 	if (lp->pending_tx_skb != NULL)
 		smc911x_hardware_send_pkt(dev);
 	else {
-		DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
-			"%s: No pending Tx packets. DMA disabled\n", dev->name);
+		DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev,
+		    "No pending Tx packets. DMA disabled\n");
 		spin_lock_irqsave(&lp->lock, flags);
 		lp->txdma_active = 0;
 		if (!lp->tx_throttle) {
@@ -1208,8 +1206,8 @@ smc911x_tx_dma_irq(int dma, void *data)
 		spin_unlock_irqrestore(&lp->lock, flags);
 	}
 
-	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
-		"%s: TX DMA irq completed\n", dev->name);
+	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev,
+	    "TX DMA irq completed\n");
 }
 static void
 smc911x_rx_dma_irq(int dma, void *data)
@@ -1221,8 +1219,8 @@ smc911x_rx_dma_irq(int dma, void *data)
 	unsigned long flags;
 	unsigned int pkts;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
-	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, "%s: RX DMA irq handler\n", dev->name);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, "RX DMA irq handler\n");
 	/* Clear the DMA interrupt sources */
 	SMC_DMA_ACK_IRQ(dev, dma);
 	dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE);
@@ -1242,9 +1240,9 @@ smc911x_rx_dma_irq(int dma, void *data)
 		lp->rxdma_active = 0;
 	}
 	spin_unlock_irqrestore(&lp->lock, flags);
-	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
-		"%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n",
-		dev->name, pkts);
+	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev,
+	    "RX DMA irq completed. DMA RX FIFO PKTS %d\n",
+	    pkts);
 }
 #endif	 /* SMC_USE_DMA */
 
@@ -1268,14 +1266,14 @@ static void smc911x_timeout(struct net_device *dev)
 	int status, mask;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 	status = SMC_GET_INT(lp);
 	mask = SMC_GET_INT_EN(lp);
 	spin_unlock_irqrestore(&lp->lock, flags);
-	DBG(SMC_DEBUG_MISC, "%s: INT 0x%02x MASK 0x%02x\n",
-		dev->name, status, mask);
+	DBG(SMC_DEBUG_MISC, dev, "INT 0x%02x MASK 0x%02x\n",
+	    status, mask);
 
 	/* Dump the current TX FIFO contents and restart */
 	mask = SMC_GET_TX_CFG(lp);
@@ -1306,7 +1304,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	unsigned int mcr, update_multicast = 0;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 	SMC_GET_MAC_CR(lp, mcr);
@@ -1314,7 +1312,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {
 
-		DBG(SMC_DEBUG_MISC, "%s: RCR_PRMS\n", dev->name);
+		DBG(SMC_DEBUG_MISC, dev, "RCR_PRMS\n");
 		mcr |= MAC_CR_PRMS_;
 	}
 	/*
@@ -1323,7 +1321,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	 * checked before the table is
 	 */
 	else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
-		DBG(SMC_DEBUG_MISC, "%s: RCR_ALMUL\n", dev->name);
+		DBG(SMC_DEBUG_MISC, dev, "RCR_ALMUL\n");
 		mcr |= MAC_CR_MCPAS_;
 	}
 
@@ -1363,8 +1361,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 		/* now, the table can be loaded into the chipset */
 		update_multicast = 1;
 	} else	 {
-		DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n",
-			dev->name);
+		DBG(SMC_DEBUG_MISC, dev, "~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n");
 		mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
 
 		/*
@@ -1378,9 +1375,9 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	spin_lock_irqsave(&lp->lock, flags);
 	SMC_SET_MAC_CR(lp, mcr);
 	if (update_multicast) {
-		DBG(SMC_DEBUG_MISC,
-			"%s: update mcast hash table 0x%08x 0x%08x\n",
-			dev->name, multicast_table[0], multicast_table[1]);
+		DBG(SMC_DEBUG_MISC, dev,
+		    "update mcast hash table 0x%08x 0x%08x\n",
+		    multicast_table[0], multicast_table[1]);
 		SMC_SET_HASHL(lp, multicast_table[0]);
 		SMC_SET_HASHH(lp, multicast_table[1]);
 	}
@@ -1398,7 +1395,7 @@ smc911x_open(struct net_device *dev)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	/* reset the hardware */
 	smc911x_reset(dev);
@@ -1425,7 +1422,7 @@ static int smc911x_close(struct net_device *dev)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);
@@ -1459,7 +1456,7 @@ smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
 	int ret, status;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 	cmd->maxtxpkt = 1;
 	cmd->maxrxpkt = 1;
 
@@ -1597,16 +1594,16 @@ static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev)
 	e2p_cmd = SMC_GET_E2P_CMD(lp);
 	for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) {
 		if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) {
-			PRINTK("%s: %s timeout waiting for EEPROM to respond\n",
-				dev->name, __func__);
+			PRINTK(dev, "%s timeout waiting for EEPROM to respond\n",
+			       __func__);
 			return -EFAULT;
 		}
 		mdelay(1);
 		e2p_cmd = SMC_GET_E2P_CMD(lp);
 	}
 	if (timeout == 0) {
-		PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n",
-			dev->name, __func__);
+		PRINTK(dev, "%s timeout waiting for EEPROM CMD not busy\n",
+		       __func__);
 		return -ETIMEDOUT;
 	}
 	return 0;
@@ -1719,7 +1716,7 @@ static int smc911x_findirq(struct net_device *dev)
 	int timeout = 20;
 	unsigned long cookie;
 
-	DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	cookie = probe_irq_on();
 
@@ -1799,13 +1796,14 @@ static int smc911x_probe(struct net_device *dev)
 	const char *version_string;
 	unsigned long irq_flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	/* First, see if the endian word is recognized */
 	val = SMC_GET_BYTE_TEST(lp);
-	DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val);
+	DBG(SMC_DEBUG_MISC, dev, "%s: endian probe returned 0x%04x\n",
+	    CARDNAME, val);
 	if (val != 0x87654321) {
-		printk(KERN_ERR "Invalid chip endian 0x%08x\n",val);
+		netdev_err(dev, "Invalid chip endian 0x%08x\n", val);
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -1816,26 +1814,29 @@ static int smc911x_probe(struct net_device *dev)
 	 * as future revisions could be added.
 	 */
 	chip_id = SMC_GET_PN(lp);
-	DBG(SMC_DEBUG_MISC, "%s: id probe returned 0x%04x\n", CARDNAME, chip_id);
+	DBG(SMC_DEBUG_MISC, dev, "%s: id probe returned 0x%04x\n",
+	    CARDNAME, chip_id);
 	for(i=0;chip_ids[i].id != 0; i++) {
 		if (chip_ids[i].id == chip_id) break;
 	}
 	if (!chip_ids[i].id) {
-		printk(KERN_ERR "Unknown chip ID %04x\n", chip_id);
+		netdev_err(dev, "Unknown chip ID %04x\n", chip_id);
 		retval = -ENODEV;
 		goto err_out;
 	}
 	version_string = chip_ids[i].name;
 
 	revision = SMC_GET_REV(lp);
-	DBG(SMC_DEBUG_MISC, "%s: revision = 0x%04x\n", CARDNAME, revision);
+	DBG(SMC_DEBUG_MISC, dev, "%s: revision = 0x%04x\n", CARDNAME, revision);
 
 	/* At this point I'll assume that the chip is an SMC911x. */
-	DBG(SMC_DEBUG_MISC, "%s: Found a %s\n", CARDNAME, chip_ids[i].name);
+	DBG(SMC_DEBUG_MISC, dev, "%s: Found a %s\n",
+	    CARDNAME, chip_ids[i].name);
 
 	/* Validate the TX FIFO size requested */
 	if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) {
-		printk(KERN_ERR "Invalid TX FIFO size requested %d\n", tx_fifo_kb);
+		netdev_err(dev, "Invalid TX FIFO size requested %d\n",
+			   tx_fifo_kb);
 		retval = -EINVAL;
 		goto err_out;
 	}
@@ -1887,14 +1888,13 @@ static int smc911x_probe(struct net_device *dev)
 		case 14:/* 1920 Rx Data Fifo Size */
 			lp->afc_cfg=0x0006032F;break;
 		 default:
-			 PRINTK("%s: ERROR -- no AFC_CFG setting found",
-				dev->name);
+			 PRINTK(dev, "ERROR -- no AFC_CFG setting found");
 			 break;
 	}
 
-	DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX,
-		"%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
-		lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
+	DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, dev,
+	    "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
+	    lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
 
 	spin_lock_init(&lp->lock);
 
@@ -1924,8 +1924,7 @@ static int smc911x_probe(struct net_device *dev)
 		}
 	}
 	if (dev->irq == 0) {
-		printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
-			dev->name);
+		netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n");
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -1980,33 +1979,32 @@ static int smc911x_probe(struct net_device *dev)
 	retval = register_netdev(dev);
 	if (retval == 0) {
 		/* now, print out the card info, in a short format.. */
-		printk("%s: %s (rev %d) at %#lx IRQ %d",
-			dev->name, version_string, lp->revision,
-			dev->base_addr, dev->irq);
+		netdev_info(dev, "%s (rev %d) at %#lx IRQ %d",
+			    version_string, lp->revision,
+			    dev->base_addr, dev->irq);
 
 #ifdef SMC_USE_DMA
 		if (lp->rxdma != -1)
-			printk(" RXDMA %d ", lp->rxdma);
+			pr_cont(" RXDMA %d", lp->rxdma);
 
 		if (lp->txdma != -1)
-			printk("TXDMA %d", lp->txdma);
+			pr_cont(" TXDMA %d", lp->txdma);
 #endif
-		printk("\n");
+		pr_cont("\n");
 		if (!is_valid_ether_addr(dev->dev_addr)) {
-			printk("%s: Invalid ethernet MAC address. Please "
-					"set using ifconfig\n", dev->name);
+			netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n");
 		} else {
 			/* Print the Ethernet address */
-			printk("%s: Ethernet addr: %pM\n",
-				dev->name, dev->dev_addr);
+			netdev_info(dev, "Ethernet addr: %pM\n",
+				    dev->dev_addr);
 		}
 
 		if (lp->phy_type == 0) {
-			PRINTK("%s: No PHY found\n", dev->name);
+			PRINTK(dev, "No PHY found\n");
 		} else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) {
-			PRINTK("%s: LAN911x Internal PHY\n", dev->name);
+			PRINTK(dev, "LAN911x Internal PHY\n");
 		} else {
-			PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type);
+			PRINTK(dev, "External PHY 0x%08x\n", lp->phy_type);
 		}
 	}
 
@@ -2025,7 +2023,7 @@ err_out:
 }
 
 /*
- * smc911x_init(void)
+ * smc911x_drv_probe(void)
  *
  *	  Output:
  *	 0 --> there is a device
@@ -2039,6 +2037,7 @@ static int smc911x_drv_probe(struct platform_device *pdev)
 	void __iomem *addr;
 	int ret;
 
+	/* ndev is not valid yet, so avoid passing it in. */
 	DBG(SMC_DEBUG_FUNC, "--> %s\n",  __func__);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -2093,7 +2092,7 @@ release_both:
 release_1:
 		release_mem_region(res->start, SMC911X_IO_EXTENT);
 out:
-		printk("%s: not found (%d).\n", CARDNAME, ret);
+		pr_info("%s: not found (%d).\n", CARDNAME, ret);
 	}
 #ifdef SMC_USE_DMA
 	else {
@@ -2111,7 +2110,7 @@ static int smc911x_drv_remove(struct platform_device *pdev)
 	struct smc911x_local *lp = netdev_priv(ndev);
 	struct resource *res;
 
-	DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
 
 	unregister_netdev(ndev);
 
@@ -2140,7 +2139,7 @@ static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state)
 	struct net_device *ndev = platform_get_drvdata(dev);
 	struct smc911x_local *lp = netdev_priv(ndev);
 
-	DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
 	if (ndev) {
 		if (netif_running(ndev)) {
 			netif_device_detach(ndev);
@@ -2158,7 +2157,7 @@ static int smc911x_drv_resume(struct platform_device *dev)
 {
 	struct net_device *ndev = platform_get_drvdata(dev);
 
-	DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
 	if (ndev) {
 		struct smc911x_local *lp = netdev_priv(ndev);
 
diff --git a/drivers/net/ethernet/smsc/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
index d51261b..9965da3 100644
--- a/drivers/net/ethernet/smsc/smc911x.h
+++ b/drivers/net/ethernet/smsc/smc911x.h
@@ -227,7 +227,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
 #define SMC_DMA_ACK_IRQ(dev, dma)					\
 {									\
 	if (DCSR(dma) & DCSR_BUSERR) {					\
-		printk("%s: DMA %d bus error!\n", dev->name, dma);	\
+		netdev_err(dev, "DMA %d bus error!\n", dma);		\
 	}								\
 	DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;		\
 }
-- 
1.8.4.2

[PATCHv2 net-next 4/7] smsc911x: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smsc911x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 01f8459..8564f23 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2167,7 +2167,7 @@ static int smsc911x_init(struct net_device *dev)
 		udelay(1000);
 
 	if (to == 0) {
-		pr_err("Device not READY in 100ms aborting\n");
+		netdev_err(dev, "Device not READY in 100ms aborting\n");
 		return -ENODEV;
 	}
 
-- 
1.8.4.2

[PATCHv2 net-next 5/7] smc9194: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc9194.c | 52 ++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index e85c2e7..51aa9cf 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -55,7 +55,7 @@
  ----------------------------------------------------------------------------*/
 
 static const char version[] =
-	"smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)\n";
+	"smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)";
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -612,7 +612,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 	packet_no = inb( ioaddr + PNR_ARR + 1 );
 	if ( packet_no & 0x80 ) {
 		/* or isn't there?  BAD CHIP! */
-		printk(KERN_DEBUG CARDNAME": Memory allocation failed.\n");
+		netdev_dbg(dev, CARDNAME": Memory allocation failed.\n");
 		dev_kfree_skb_any(skb);
 		lp->saved_skb = NULL;
 		netif_wake_queue(dev);
@@ -625,7 +625,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 	/* point to the beginning of the packet */
 	outw( PTR_AUTOINC , ioaddr + POINTER );
 
-   	PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length ));
+	PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length));
 #if SMC_DEBUG > 2
 	print_packet( buf, length );
 #endif
@@ -865,7 +865,6 @@ static const struct net_device_ops smc_netdev_ops = {
 static int __init smc_probe(struct net_device *dev, int ioaddr)
 {
 	int i, memory, retval;
-	static unsigned version_printed;
 	unsigned int bank;
 
 	const char *version_string;
@@ -937,8 +936,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 	   It might be prudent to check a listing of MAC addresses
 	   against the hardware address, or do some other tests. */
 
-	if (version_printed++ == 0)
-		printk("%s", version);
+	pr_info_once("%s\n", version);
 
 	/* fill in some of the fields */
 	dev->base_addr = ioaddr;
@@ -1027,21 +1025,21 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 
 	/* now, print out the card info, in a short format.. */
 
-	printk("%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
-		version_string, revision_register & 0xF, ioaddr, dev->irq,
-		if_string, memory );
+	netdev_info(dev, "%s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ",
+		    version_string, revision_register & 0xF, ioaddr, dev->irq,
+		    if_string, memory);
 	/*
 	 . Print the Ethernet address
 	*/
-	printk("ADDR: %pM\n", dev->dev_addr);
+	netdev_info(dev, "ADDR: %pM\n", dev->dev_addr);
 
 	/* Grab the IRQ */
-      	retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
-      	if (retval) {
-		printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
-			dev->irq, retval);
-  	  	goto err_out;
-      	}
+	retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
+	if (retval) {
+		netdev_warn(dev, "%s: unable to get IRQ %d (irqval=%d).\n",
+			    DRV_NAME, dev->irq, retval);
+		goto err_out;
+	}
 
 	dev->netdev_ops			= &smc_netdev_ops;
 	dev->watchdog_timeo		= HZ/20;
@@ -1061,30 +1059,32 @@ static void print_packet( byte * buf, int length )
 	int remainder;
 	int lines;
 
-	printk("Packet of length %d\n", length);
+	pr_dbg("Packet of length %d\n", length);
 	lines = length / 16;
 	remainder = length % 16;
 
 	for ( i = 0; i < lines ; i ++ ) {
 		int cur;
 
+		printk(KERN_DEBUG);
 		for ( cur = 0; cur < 8; cur ++ ) {
 			byte a, b;
 
 			a = *(buf ++ );
 			b = *(buf ++ );
-			printk("%02x%02x ", a, b );
+			pr_cont("%02x%02x ", a, b);
 		}
-		printk("\n");
+		pr_cont("\n");
 	}
+	printk(KERN_DEBUG);
 	for ( i = 0; i < remainder/2 ; i++ ) {
 		byte a, b;
 
 		a = *(buf ++ );
 		b = *(buf ++ );
-		printk("%02x%02x ", a, b );
+		pr_cont("%02x%02x ", a, b);
 	}
-	printk("\n");
+	pr_cont("\n");
 #endif
 }
 #endif
@@ -1151,9 +1151,8 @@ static void smc_timeout(struct net_device *dev)
 {
 	/* If we get here, some higher level has decided we are broken.
 	   There should really be a "kick me" function call instead. */
-	printk(KERN_WARNING CARDNAME": transmit timed out, %s?\n",
-		tx_done(dev) ? "IRQ conflict" :
-		"network cable problem");
+	netdev_warn(dev, CARDNAME": transmit timed out, %s?\n",
+		    tx_done(dev) ? "IRQ conflict" : "network cable problem");
 	/* "kick" the adaptor */
 	smc_reset( dev->base_addr );
 	smc_enable( dev->base_addr );
@@ -1323,8 +1322,7 @@ static void smc_tx( struct net_device * dev )
 	dev->stats.tx_errors++;
 	if ( tx_status & TS_LOSTCAR ) dev->stats.tx_carrier_errors++;
 	if ( tx_status & TS_LATCOL  ) {
-		printk(KERN_DEBUG CARDNAME
-			": Late collision occurred on last xmit.\n");
+		netdev_dbg(dev, CARDNAME": Late collision occurred on last xmit.\n");
 		dev->stats.tx_window_errors++;
 	}
 #if 0
@@ -1332,7 +1330,7 @@ static void smc_tx( struct net_device * dev )
 #endif
 
 	if ( tx_status & TS_SUCCESS ) {
-		printk(CARDNAME": Successful packet caused interrupt\n");
+		netdev_info(dev, CARDNAME": Successful packet caused interrupt\n");
 	}
 	/* re-enable transmit */
 	SMC_SELECT_BANK( 0 );
-- 
1.8.4.2

[PATCHv2 net-next 6/7] smc91c92_cs: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc91c92_cs.c | 43 ++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c
index 656d2e2..8ef70d9 100644
--- a/drivers/net/ethernet/smsc/smc91c92_cs.c
+++ b/drivers/net/ethernet/smsc/smc91c92_cs.c
@@ -740,7 +740,7 @@ static int smc91c92_resume(struct pcmcia_device *link)
 	     (smc->cardid == PRODID_PSION_NET100))) {
 		i = osi_load_firmware(link);
 		if (i) {
-			pr_err("smc91c92_cs: Failed to load firmware\n");
+			netdev_err(dev, "Failed to load firmware\n");
 			return i;
 		}
 	}
@@ -793,7 +793,7 @@ static int check_sig(struct pcmcia_device *link)
     }
 
     if (width) {
-	    pr_info("using 8-bit IO window\n");
+	    netdev_info(dev, "using 8-bit IO window\n");
 
 	    smc91c92_suspend(link);
 	    pcmcia_fixup_iowidth(link);
@@ -1036,7 +1036,7 @@ static void smc_dump(struct net_device *dev)
     save = inw(ioaddr + BANK_SELECT);
     for (w = 0; w < 4; w++) {
 	SMC_SELECT_BANK(w);
-	netdev_printk(KERN_DEBUG, dev, "bank %d: ", w);
+	netdev_dbg(dev, "bank %d: ", w);
 	for (i = 0; i < 14; i += 2)
 	    pr_cont(" %04x", inw(ioaddr + i));
 	pr_cont("\n");
@@ -1213,8 +1213,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
     if (smc->saved_skb) {
 	/* THIS SHOULD NEVER HAPPEN. */
 	dev->stats.tx_aborted_errors++;
-	netdev_printk(KERN_DEBUG, dev,
-		      "Internal error -- sent packet while busy\n");
+	netdev_dbg(dev, "Internal error -- sent packet while busy\n");
 	return NETDEV_TX_BUSY;
     }
     smc->saved_skb = skb;
@@ -1254,7 +1253,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
     }
 
     /* Otherwise defer until the Tx-space-allocated interrupt. */
-    pr_debug("%s: memory allocation deferred.\n", dev->name);
+    netdev_dbg(dev, "memory allocation deferred.\n");
     outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
     spin_unlock_irqrestore(&smc->lock, flags);
 
@@ -1317,8 +1316,8 @@ static void smc_eph_irq(struct net_device *dev)
 
     SMC_SELECT_BANK(0);
     ephs = inw(ioaddr + EPH);
-    pr_debug("%s: Ethernet protocol handler interrupt, status"
-	  " %4.4x.\n", dev->name, ephs);
+    netdev_dbg(dev, "Ethernet protocol handler interrupt, status %4.4x.\n",
+	       ephs);
     /* Could be a counter roll-over warning: update stats. */
     card_stats = inw(ioaddr + COUNTER);
     /* single collisions */
@@ -1357,8 +1356,8 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 
     ioaddr = dev->base_addr;
 
-    pr_debug("%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
-	  irq, ioaddr);
+    netdev_dbg(dev, "SMC91c92 interrupt %d at %#x.\n",
+	       irq, ioaddr);
 
     spin_lock(&smc->lock);
     smc->watchdog = 0;
@@ -1366,8 +1365,8 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
     if ((saved_bank & 0xff00) != 0x3300) {
 	/* The device does not exist -- the card could be off-line, or
 	   maybe it has been ejected. */
-	pr_debug("%s: SMC91c92 interrupt %d for non-existent"
-	      "/ejected device.\n", dev->name, irq);
+	netdev_dbg(dev, "SMC91c92 interrupt %d for non-existent/ejected device.\n",
+		   irq);
 	handled = 0;
 	goto irq_done;
     }
@@ -1380,8 +1379,8 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 
     do { /* read the status flag, and mask it */
 	status = inw(ioaddr + INTERRUPT) & 0xff;
-	pr_debug("%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
-	      status, mask);
+	netdev_dbg(dev, "Status is %#2.2x (mask %#2.2x).\n",
+		   status, mask);
 	if ((status & mask) == 0) {
 	    if (bogus_cnt == INTR_WORK)
 		handled = 0;
@@ -1425,15 +1424,15 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 	    smc_eph_irq(dev);
     } while (--bogus_cnt);
 
-    pr_debug("  Restoring saved registers mask %2.2x bank %4.4x"
-	  " pointer %4.4x.\n", mask, saved_bank, saved_pointer);
+    netdev_dbg(dev, "  Restoring saved registers mask %2.2x bank %4.4x pointer %4.4x.\n",
+	       mask, saved_bank, saved_pointer);
 
     /* restore state register */
     outw((mask<<8), ioaddr + INTERRUPT);
     outw(saved_pointer, ioaddr + POINTER);
     SMC_SELECT_BANK(saved_bank);
 
-    pr_debug("%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
+    netdev_dbg(dev, "Exiting interrupt IRQ%d.\n", irq);
 
 irq_done:
 
@@ -1491,10 +1490,10 @@ static void smc_rx(struct net_device *dev)
     rx_status = inw(ioaddr + DATA_1);
     packet_length = inw(ioaddr + DATA_1) & 0x07ff;
 
-    pr_debug("%s: Receive status %4.4x length %d.\n",
-	  dev->name, rx_status, packet_length);
+    netdev_dbg(dev, "Receive status %4.4x length %d.\n",
+	       rx_status, packet_length);
 
-    if (!(rx_status & RS_ERRORS)) {		
+    if (!(rx_status & RS_ERRORS)) {
 	/* do stuff to make a new packet */
 	struct sk_buff *skb;
 	
@@ -1502,7 +1501,7 @@ static void smc_rx(struct net_device *dev)
 	skb = netdev_alloc_skb(dev, packet_length+2);
 	
 	if (skb == NULL) {
-	    pr_debug("%s: Low memory, packet dropped.\n", dev->name);
+	    netdev_dbg(dev, "Low memory, packet dropped.\n");
 	    dev->stats.rx_dropped++;
 	    outw(MC_RELEASE, ioaddr + MMU_CMD);
 	    return;
@@ -1643,7 +1642,7 @@ static void smc_reset(struct net_device *dev)
     struct smc_private *smc = netdev_priv(dev);
     int i;
 
-    pr_debug("%s: smc91c92 reset called.\n", dev->name);
+    netdev_dbg(dev, "smc91c92 reset called.\n");
 
     /* The first interaction must be a write to bring the chip out
        of sleep mode. */
-- 
1.8.4.2

[PATCHv2 net-next 7/7] smsc9420: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smsc9420.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
index e55e336..059bcaf 100644
--- a/drivers/net/ethernet/smsc/smsc9420.c
+++ b/drivers/net/ethernet/smsc/smsc9420.c
@@ -99,17 +99,17 @@ MODULE_PARM_DESC(debug, "debug level");
 
 #define smsc_dbg(TYPE, f, a...) \
 do {	if ((pd)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_DEBUG PFX f "\n", ## a); \
+		netdev_dbg((pd)->dev, PFX f "\n", ## a); \
 } while (0)
 
 #define smsc_info(TYPE, f, a...) \
 do {	if ((pd)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_INFO PFX f "\n", ## a); \
+		netdev_info((pd)->dev, PFX f "\n", ## a); \
 } while (0)
 
 #define smsc_warn(TYPE, f, a...) \
 do {	if ((pd)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_WARNING PFX f "\n", ## a); \
+		netdev_warn((pd)->dev, PFX f "\n", ## a); \
 } while (0)
 
 static inline u32 smsc9420_reg_read(struct smsc9420_pdata *pd, u32 offset)
@@ -1168,7 +1168,7 @@ static int smsc9420_mii_probe(struct net_device *dev)
 
 	/* Device only supports internal PHY at address 1 */
 	if (!pd->mii_bus->phy_map[1]) {
-		pr_err("%s: no PHY found at address 1\n", dev->name);
+		netdev_err(dev, "no PHY found at address 1\n");
 		return -ENODEV;
 	}
 
@@ -1180,12 +1180,12 @@ static int smsc9420_mii_probe(struct net_device *dev)
 			     smsc9420_phy_adjust_link, PHY_INTERFACE_MODE_MII);
 
 	if (IS_ERR(phydev)) {
-		pr_err("%s: Could not attach to PHY\n", dev->name);
+		netdev_err(dev, "Could not attach to PHY\n");
 		return PTR_ERR(phydev);
 	}
 
-	pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
-		dev->name, phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+	netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+		    phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	/* mask with MAC supported features */
 	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
@@ -1582,12 +1582,12 @@ smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	int result = 0;
 	u32 id_rev;
 
-	printk(KERN_INFO DRV_DESCRIPTION " version " DRV_VERSION "\n");
+	pr_info(DRV_DESCRIPTION " version " DRV_VERSION "\n");
 
 	/* First do the PCI initialisation */
 	result = pci_enable_device(pdev);
 	if (unlikely(result)) {
-		printk(KERN_ERR "Cannot enable smsc9420\n");
+		pr_err("Cannot enable smsc9420\n");
 		goto out_0;
 	}
 
@@ -1600,24 +1600,24 @@ smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (!(pci_resource_flags(pdev, SMSC_BAR) & IORESOURCE_MEM)) {
-		printk(KERN_ERR "Cannot find PCI device base address\n");
+		netdev_err(dev, "Cannot find PCI device base address\n");
 		goto out_free_netdev_2;
 	}
 
 	if ((pci_request_regions(pdev, DRV_NAME))) {
-		printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
+		netdev_err(dev, "Cannot obtain PCI resources, aborting.\n");
 		goto out_free_netdev_2;
 	}
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		printk(KERN_ERR "No usable DMA configuration, aborting.\n");
+		netdev_err(dev, "No usable DMA configuration, aborting.\n");
 		goto out_free_regions_3;
 	}
 
 	virt_addr = ioremap(pci_resource_start(pdev, SMSC_BAR),
 		pci_resource_len(pdev, SMSC_BAR));
 	if (!virt_addr) {
-		printk(KERN_ERR "Cannot map device registers, aborting.\n");
+		netdev_err(dev, "Cannot map device registers, aborting.\n");
 		goto out_free_regions_3;
 	}
 
-- 
1.8.4.2

[PATCHv2 net-next 0/7] smsc: replace printk with netdev_ calls

[Ben Boeckel]

Clean up printk calls in smsc network drivers by using netdev_<level>
instead. Also fixes some whitespace errors (trailing whitespace,
spaces-between-tabs) noticed while fixing the printk calls. Reindenting files
was not done.

I've compile tested them all on x86 by forcing them to at least compile to
catch obvious errors.

Ben Boeckel (7):
  epic100: replace printk with netdev_ calls
  smc91x: replace printk with netdev_ calls
  smc911x: replace printk with netdev_ calls
  smsc911x: replace printk with netdev_ calls
  smc9194: replace printk with netdev_ calls
  smc91c92_cs: replace printk with netdev_ calls
  smsc9420: replace printk with netdev_ calls

 drivers/net/ethernet/smsc/epic100.c     | 125 ++++++------
 drivers/net/ethernet/smsc/smc911x.c     | 331 ++++++++++++++++----------------
 drivers/net/ethernet/smsc/smc911x.h     |   2 +-
 drivers/net/ethernet/smsc/smc9194.c     |  52 +++--
 drivers/net/ethernet/smsc/smc91c92_cs.c |  43 ++---
 drivers/net/ethernet/smsc/smc91x.c      | 237 +++++++++++------------
 drivers/net/ethernet/smsc/smc91x.h      |   4 +-
 drivers/net/ethernet/smsc/smsc911x.c    |   2 +-
 drivers/net/ethernet/smsc/smsc9420.c    |  26 +--
 9 files changed, 402 insertions(+), 420 deletions(-)

-- 
1.8.4.2

[PATCHv3 net-next 1/7] epic100: replace printk with netdev_ calls

[Ben Boeckel]

Also snipes some whitespace errors.

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/epic100.c | 125 +++++++++++++++++-------------------
 1 file changed, 58 insertions(+), 67 deletions(-)

diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
index 8c5c24a..8ae1f8a7 100644
--- a/drivers/net/ethernet/smsc/epic100.c
+++ b/drivers/net/ethernet/smsc/epic100.c
@@ -91,9 +91,9 @@ static int rx_copybreak;
 
 /* These identify the driver base version and may not be removed. */
 static char version[] =
-DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n";
+DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>";
 static char version2[] =
-"  (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+"  (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
@@ -332,9 +332,7 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 /* when built into the kernel, we only print version if device is found */
 #ifndef MODULE
-	static int printed_version;
-	if (!printed_version++)
-		printk(KERN_INFO "%s%s", version, version2);
+	pr_info_once("%s%s\n", version, version2);
 #endif
 
 	card_idx++;
@@ -423,9 +421,9 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		((__le16 *)dev->dev_addr)[i] = cpu_to_le16(er16(LAN0 + i*4));
 
 	if (debug > 2) {
-		dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n");
+		dev_dbg(&pdev->dev, "EEPROM contents:\n");
 		for (i = 0; i < 64; i++)
-			printk(" %4.4x%s", read_eeprom(ep, i),
+			pr_cont(" %4.4x%s", read_eeprom(ep, i),
 				   i % 16 == 15 ? "\n" : "");
 	}
 
@@ -490,10 +488,10 @@ static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret < 0)
 		goto err_out_unmap_rx;
 
-	printk(KERN_INFO "%s: %s at %lx, IRQ %d, %pM\n",
-	       dev->name, pci_id_tbl[chip_idx].name,
-	       (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
-	       dev->dev_addr);
+	netdev_info(dev, "%s at %lx, IRQ %d, %pM\n",
+		    pci_id_tbl[chip_idx].name,
+		    (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
+		    dev->dev_addr);
 
 out:
 	return ret;
@@ -703,9 +701,8 @@ static int epic_open(struct net_device *dev)
 			mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
 		if (dev->if_port == 1) {
 			if (debug > 1)
-				printk(KERN_INFO "%s: Using the 10base2 transceiver, MII "
-					   "status %4.4x.\n",
-					   dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));
+				netdev_info(dev, "Using the 10base2 transceiver, MII status %4.4x.\n",
+					    mdio_read(dev, ep->phys[0], MII_BMSR));
 		}
 	} else {
 		int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA);
@@ -715,10 +712,10 @@ static int epic_open(struct net_device *dev)
 			else if (! (mii_lpa & LPA_LPACK))
 				mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
 			if (debug > 1)
-				printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d"
-					   " register read of %4.4x.\n", dev->name,
-					   ep->mii.full_duplex ? "full" : "half",
-					   ep->phys[0], mii_lpa);
+				netdev_info(dev, "Setting %s-duplex based on MII xcvr %d register read of %4.4x.\n",
+					    ep->mii.full_duplex ? "full"
+								: "half",
+					    ep->phys[0], mii_lpa);
 		}
 	}
 
@@ -738,10 +735,9 @@ static int epic_open(struct net_device *dev)
 	     TxUnderrun);
 
 	if (debug > 1) {
-		printk(KERN_DEBUG "%s: epic_open() ioaddr %p IRQ %d "
-		       "status %4.4x %s-duplex.\n",
-		       dev->name, ioaddr, irq, er32(GENCTL),
-		       ep->mii.full_duplex ? "full" : "half");
+		netdev_dbg(dev, "epic_open() ioaddr %p IRQ %d status %4.4x %s-duplex.\n",
+			   ioaddr, irq, er32(GENCTL),
+			   ep->mii.full_duplex ? "full" : "half");
 	}
 
 	/* Set the timer to switch to check for link beat and perhaps switch
@@ -790,8 +786,8 @@ static void epic_restart(struct net_device *dev)
 	/* Soft reset the chip. */
 	ew32(GENCTL, 0x4001);
 
-	printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
-		   dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
+	netdev_dbg(dev, "Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
+		   ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
 	udelay(1);
 
 	/* This magic is documented in SMSC app note 7.15 */
@@ -827,9 +823,8 @@ static void epic_restart(struct net_device *dev)
 	     ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
 	     TxUnderrun);
 
-	printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
-		   " interrupt %4.4x.\n",
-		   dev->name, er32(COMMAND), er32(GENCTL), er32(INTSTAT));
+	netdev_dbg(dev, "epic_restart() done, cmd status %4.4x, ctl %4.4x interrupt %4.4x.\n",
+		   er32(COMMAND), er32(GENCTL), er32(INTSTAT));
 }
 
 static void check_media(struct net_device *dev)
@@ -846,9 +841,9 @@ static void check_media(struct net_device *dev)
 		return;
 	if (ep->mii.full_duplex != duplex) {
 		ep->mii.full_duplex = duplex;
-		printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link"
-			   " partner capability of %4.4x.\n", dev->name,
-			   ep->mii.full_duplex ? "full" : "half", ep->phys[0], mii_lpa);
+		netdev_info(dev, "Setting %s-duplex based on MII #%d link partner capability of %4.4x.\n",
+			    ep->mii.full_duplex ? "full" : "half",
+			    ep->phys[0], mii_lpa);
 		ew32(TxCtrl, ep->mii.full_duplex ? 0x7F : 0x79);
 	}
 }
@@ -861,11 +856,10 @@ static void epic_timer(unsigned long data)
 	int next_tick = 5*HZ;
 
 	if (debug > 3) {
-		printk(KERN_DEBUG "%s: Media monitor tick, Tx status %8.8x.\n",
-		       dev->name, er32(TxSTAT));
-		printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x "
-		       "IntStatus %4.4x RxStatus %4.4x.\n", dev->name,
-		       er32(INTMASK), er32(INTSTAT), er32(RxSTAT));
+		netdev_dbg(dev, "Media monitor tick, Tx status %8.8x.\n",
+			   er32(TxSTAT));
+		netdev_dbg(dev, "Other registers are IntMask %4.4x IntStatus %4.4x RxStatus %4.4x.\n",
+			   er32(INTMASK), er32(INTSTAT), er32(RxSTAT));
 	}
 
 	check_media(dev);
@@ -880,11 +874,11 @@ static void epic_tx_timeout(struct net_device *dev)
 	void __iomem *ioaddr = ep->ioaddr;
 
 	if (debug > 0) {
-		printk(KERN_WARNING "%s: Transmit timeout using MII device, "
-		       "Tx status %4.4x.\n", dev->name, er16(TxSTAT));
+		netdev_warn(dev, "Transmit timeout using MII device, Tx status %4.4x.\n",
+			    er16(TxSTAT));
 		if (debug > 1) {
-			printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
-				   dev->name, ep->dirty_tx, ep->cur_tx);
+			netdev_dbg(dev, "Tx indices: dirty_tx %d, cur_tx %d.\n",
+				   ep->dirty_tx, ep->cur_tx);
 		}
 	}
 	if (er16(TxSTAT) & 0x10) {		/* Tx FIFO underflow. */
@@ -994,9 +988,8 @@ static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	ew32(COMMAND, TxQueued);
 
 	if (debug > 4)
-		printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, "
-		       "flag %2.2x Tx status %8.8x.\n", dev->name, skb->len,
-		       entry, ctrl_word, er32(TxSTAT));
+		netdev_dbg(dev, "Queued Tx packet size %d to slot %d, flag %2.2x Tx status %8.8x.\n",
+			   skb->len, entry, ctrl_word, er32(TxSTAT));
 
 	return NETDEV_TX_OK;
 }
@@ -1009,8 +1002,8 @@ static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
 #ifndef final_version
 	/* There was an major error, log it. */
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
-		       dev->name, status);
+		netdev_dbg(dev, "Transmit error, Tx status %8.8x.\n",
+			   status);
 #endif
 	stats->tx_errors++;
 	if (status & 0x1050)
@@ -1057,9 +1050,8 @@ static void epic_tx(struct net_device *dev, struct epic_private *ep)
 
 #ifndef final_version
 	if (cur_tx - dirty_tx > TX_RING_SIZE) {
-		printk(KERN_WARNING
-		       "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
-		       dev->name, dirty_tx, cur_tx, ep->tx_full);
+		netdev_warn(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
+			    dirty_tx, cur_tx, ep->tx_full);
 		dirty_tx += TX_RING_SIZE;
 	}
 #endif
@@ -1086,8 +1078,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 	ew32(INTSTAT, status & EpicNormalEvent);
 
 	if (debug > 4) {
-		printk(KERN_DEBUG "%s: Interrupt, status=%#8.8x new "
-		       "intstat=%#8.8x.\n", dev->name, status, er32(INTSTAT));
+		netdev_dbg(dev, "Interrupt, status=%#8.8x new intstat=%#8.8x.\n",
+			   status, er32(INTSTAT));
 	}
 
 	if ((status & IntrSummary) == 0)
@@ -1125,8 +1117,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 			ew32(COMMAND, RestartTx);
 		}
 		if (status & PCIBusErr170) {
-			printk(KERN_ERR "%s: PCI Bus Error! status %4.4x.\n",
-					 dev->name, status);
+			netdev_err(dev, "PCI Bus Error! status %4.4x.\n",
+				   status);
 			epic_pause(dev);
 			epic_restart(dev);
 		}
@@ -1136,8 +1128,8 @@ static irqreturn_t epic_interrupt(int irq, void *dev_instance)
 
 out:
 	if (debug > 3) {
-		printk(KERN_DEBUG "%s: exit interrupt, intr_status=%#4.4x.\n",
-				   dev->name, status);
+		netdev_dbg(dev, "exit interrupt, intr_status=%#4.4x.\n",
+			   status);
 	}
 
 	return IRQ_RETVAL(handled);
@@ -1151,7 +1143,7 @@ static int epic_rx(struct net_device *dev, int budget)
 	int work_done = 0;
 
 	if (debug > 4)
-		printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry,
+		netdev_dbg(dev, " In epic_rx(), entry %d %8.8x.\n", entry,
 			   ep->rx_ring[entry].rxstatus);
 
 	if (rx_work_limit > budget)
@@ -1162,16 +1154,17 @@ static int epic_rx(struct net_device *dev, int budget)
 		int status = ep->rx_ring[entry].rxstatus;
 
 		if (debug > 4)
-			printk(KERN_DEBUG "  epic_rx() status was %8.8x.\n", status);
+			netdev_dbg(dev, "  epic_rx() status was %8.8x.\n",
+				   status);
 		if (--rx_work_limit < 0)
 			break;
 		if (status & 0x2006) {
 			if (debug > 2)
-				printk(KERN_DEBUG "%s: epic_rx() error status was %8.8x.\n",
-					   dev->name, status);
+				netdev_dbg(dev, "epic_rx() error status was %8.8x.\n",
+					   status);
 			if (status & 0x2000) {
-				printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
-					   "multiple buffers, status %4.4x!\n", dev->name, status);
+				netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %4.4x!\n",
+					    status);
 				dev->stats.rx_length_errors++;
 			} else if (status & 0x0006)
 				/* Rx Frame errors are counted in hardware. */
@@ -1183,9 +1176,8 @@ static int epic_rx(struct net_device *dev, int budget)
 			struct sk_buff *skb;
 
 			if (pkt_len > PKT_BUF_SZ - 4) {
-				printk(KERN_ERR "%s: Oversized Ethernet frame, status %x "
-					   "%d bytes.\n",
-					   dev->name, status, pkt_len);
+				netdev_err(dev, "Oversized Ethernet frame, status %x %d bytes.\n",
+					   status, pkt_len);
 				pkt_len = 1514;
 			}
 			/* Check if the packet is long enough to accept without copying
@@ -1305,8 +1297,8 @@ static int epic_close(struct net_device *dev)
 	napi_disable(&ep->napi);
 
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
-		       dev->name, er32(INTSTAT));
+		netdev_dbg(dev, "Shutting down ethercard, status was %2.2x.\n",
+			   er32(INTSTAT));
 
 	del_timer_sync(&ep->timer);
 
@@ -1324,7 +1316,7 @@ static int epic_close(struct net_device *dev)
 		ep->rx_ring[i].buflength = 0;
 		if (skb) {
 			pci_unmap_single(pdev, ep->rx_ring[i].bufaddr,
-				 	 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
+					 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			dev_kfree_skb(skb);
 		}
 		ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
@@ -1587,8 +1579,7 @@ static int __init epic_init (void)
 {
 /* when a module, this is printed whether or not devices are found in probe */
 #ifdef MODULE
-	printk (KERN_INFO "%s%s",
-		version, version2);
+	pr_info("%s%s\n", version, version2);
 #endif
 
 	return pci_register_driver(&epic_driver);
-- 
1.8.4.2

[PATCHv3 net-next 2/7] smc91x: replace printk with netdev_ calls

[Ben Boeckel]

Also snipes some whitespace errors.

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc91x.c | 237 ++++++++++++++++++-------------------
 drivers/net/ethernet/smsc/smc91x.h |   4 +-
 2 files changed, 118 insertions(+), 123 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 73be7f3..0c9b5d9 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -58,7 +58,7 @@
  *   22/09/04  Nicolas Pitre      big update (see commit log for details)
  */
 static const char version[] =
-	"smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>\n";
+	"smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>";
 
 /* Debugging level */
 #ifndef SMC_DEBUG
@@ -149,16 +149,16 @@ MODULE_ALIAS("platform:smc91x");
 #define MII_DELAY		1
 
 #if SMC_DEBUG > 0
-#define DBG(n, args...)					\
+#define DBG(n, dev, args...)				\
 	do {						\
 		if (SMC_DEBUG >= (n))			\
-			printk(args);	\
+			netdev_dbg(dev, args);		\
 	} while (0)
 
-#define PRINTK(args...)   printk(args)
+#define PRINTK(dev, args...)   netdev_info(dev, args)
 #else
-#define DBG(n, args...)   do { } while(0)
-#define PRINTK(args...)   printk(KERN_DEBUG args)
+#define DBG(n, dev, args...)   do { } while (0)
+#define PRINTK(dev, args...)   netdev_dbg(dev, args)
 #endif
 
 #if SMC_DEBUG > 3
@@ -173,24 +173,26 @@ static void PRINT_PKT(u_char *buf, int length)
 
 	for (i = 0; i < lines ; i ++) {
 		int cur;
+		printk(KERN_DEBUG);
 		for (cur = 0; cur < 8; cur++) {
 			u_char a, b;
 			a = *buf++;
 			b = *buf++;
-			printk("%02x%02x ", a, b);
+			pr_cont("%02x%02x ", a, b);
 		}
-		printk("\n");
+		pr_cont("\n");
 	}
+	printk(KERN_DEBUG);
 	for (i = 0; i < remainder/2 ; i++) {
 		u_char a, b;
 		a = *buf++;
 		b = *buf++;
-		printk("%02x%02x ", a, b);
+		pr_cont("%02x%02x ", a, b);
 	}
-	printk("\n");
+	pr_cont("\n");
 }
 #else
-#define PRINT_PKT(x...)  do { } while(0)
+#define PRINT_PKT(x...)  do { } while (0)
 #endif
 
 
@@ -226,8 +228,8 @@ static void PRINT_PKT(u_char *buf, int length)
 		unsigned long timeout = jiffies + 2;			\
 		while (SMC_GET_MMU_CMD(lp) & MC_BUSY) {		\
 			if (time_after(jiffies, timeout)) {		\
-				printk("%s: timeout %s line %d\n",	\
-					dev->name, __FILE__, __LINE__);	\
+				netdev_dbg(dev, "timeout %s line %d\n",	\
+					   __FILE__, __LINE__);		\
 				break;					\
 			}						\
 			cpu_relax();					\
@@ -246,7 +248,7 @@ static void smc_reset(struct net_device *dev)
 	unsigned int ctl, cfg;
 	struct sk_buff *pending_skb;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	/* Disable all interrupts, block TX tasklet */
 	spin_lock_irq(&lp->lock);
@@ -339,7 +341,7 @@ static void smc_enable(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	int mask;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	/* see the header file for options in TCR/RCR DEFAULT */
 	SMC_SELECT_BANK(lp, 0);
@@ -373,7 +375,7 @@ static void smc_shutdown(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	struct sk_buff *pending_skb;
 
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
+	DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
 
 	/* no more interrupts for me */
 	spin_lock_irq(&lp->lock);
@@ -406,11 +408,11 @@ static inline void  smc_rcv(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	unsigned int packet_number, status, packet_len;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	packet_number = SMC_GET_RXFIFO(lp);
 	if (unlikely(packet_number & RXFIFO_REMPTY)) {
-		PRINTK("%s: smc_rcv with nothing on FIFO.\n", dev->name);
+		PRINTK(dev, "smc_rcv with nothing on FIFO.\n");
 		return;
 	}
 
@@ -420,9 +422,8 @@ static inline void  smc_rcv(struct net_device *dev)
 	/* First two words are status and packet length */
 	SMC_GET_PKT_HDR(lp, status, packet_len);
 	packet_len &= 0x07ff;  /* mask off top bits */
-	DBG(2, "%s: RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
-		dev->name, packet_number, status,
-		packet_len, packet_len);
+	DBG(2, dev, "RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
+	    packet_number, status, packet_len, packet_len);
 
 	back:
 	if (unlikely(packet_len < 6 || status & RS_ERRORS)) {
@@ -433,8 +434,8 @@ static inline void  smc_rcv(struct net_device *dev)
 		}
 		if (packet_len < 6) {
 			/* bloody hardware */
-			printk(KERN_ERR "%s: fubar (rxlen %u status %x\n",
-					dev->name, packet_len, status);
+			netdev_err(dev, "fubar (rxlen %u status %x\n",
+				   packet_len, status);
 			status |= RS_TOOSHORT;
 		}
 		SMC_WAIT_MMU_BUSY(lp);
@@ -551,7 +552,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 	unsigned char *buf;
 	unsigned long flags;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	if (!smc_special_trylock(&lp->lock, flags)) {
 		netif_stop_queue(dev);
@@ -568,7 +569,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 
 	packet_no = SMC_GET_AR(lp);
 	if (unlikely(packet_no & AR_FAILED)) {
-		printk("%s: Memory allocation failed.\n", dev->name);
+		netdev_err(dev, "Memory allocation failed.\n");
 		dev->stats.tx_errors++;
 		dev->stats.tx_fifo_errors++;
 		smc_special_unlock(&lp->lock, flags);
@@ -581,8 +582,8 @@ static void smc_hardware_send_pkt(unsigned long data)
 
 	buf = skb->data;
 	len = skb->len;
-	DBG(2, "%s: TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n",
-		dev->name, packet_no, len, len, buf);
+	DBG(2, dev, "TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n",
+	    packet_no, len, len, buf);
 	PRINT_PKT(buf, len);
 
 	/*
@@ -637,7 +638,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int numPages, poll_count, status;
 	unsigned long flags;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	BUG_ON(lp->pending_tx_skb != NULL);
 
@@ -654,7 +655,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	numPages = ((skb->len & ~1) + (6 - 1)) >> 8;
 	if (unlikely(numPages > 7)) {
-		printk("%s: Far too big packet error.\n", dev->name);
+		netdev_warn(dev, "Far too big packet error.\n");
 		dev->stats.tx_errors++;
 		dev->stats.tx_dropped++;
 		dev_kfree_skb(skb);
@@ -685,7 +686,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
    	if (!poll_count) {
 		/* oh well, wait until the chip finds memory later */
 		netif_stop_queue(dev);
-		DBG(2, "%s: TX memory allocation deferred.\n", dev->name);
+		DBG(2, dev, "TX memory allocation deferred.\n");
 		SMC_ENABLE_INT(lp, IM_ALLOC_INT);
    	} else {
 		/*
@@ -709,12 +710,12 @@ static void smc_tx(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	unsigned int saved_packet, packet_no, tx_status, pkt_len;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	/* If the TX FIFO is empty then nothing to do */
 	packet_no = SMC_GET_TXFIFO(lp);
 	if (unlikely(packet_no & TXFIFO_TEMPTY)) {
-		PRINTK("%s: smc_tx with nothing on FIFO.\n", dev->name);
+		PRINTK(dev, "smc_tx with nothing on FIFO.\n");
 		return;
 	}
 
@@ -725,8 +726,8 @@ static void smc_tx(struct net_device *dev)
 	/* read the first word (status word) from this packet */
 	SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ);
 	SMC_GET_PKT_HDR(lp, tx_status, pkt_len);
-	DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n",
-		dev->name, tx_status, packet_no);
+	DBG(2, dev, "TX STATUS 0x%04x PNR 0x%02x\n",
+	    tx_status, packet_no);
 
 	if (!(tx_status & ES_TX_SUC))
 		dev->stats.tx_errors++;
@@ -735,14 +736,12 @@ static void smc_tx(struct net_device *dev)
 		dev->stats.tx_carrier_errors++;
 
 	if (tx_status & (ES_LATCOL | ES_16COL)) {
-		PRINTK("%s: %s occurred on last xmit\n", dev->name,
+		PRINTK(dev, "%s occurred on last xmit\n",
 		       (tx_status & ES_LATCOL) ?
 			"late collision" : "too many collisions");
 		dev->stats.tx_window_errors++;
 		if (!(dev->stats.tx_window_errors & 63) && net_ratelimit()) {
-			printk(KERN_INFO "%s: unexpectedly large number of "
-			       "bad collisions. Please check duplex "
-			       "setting.\n", dev->name);
+			netdev_info(dev, "unexpectedly large number of bad collisions. Please check duplex setting.\n");
 		}
 	}
 
@@ -830,8 +829,8 @@ static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg)
 	/* Return to idle state */
 	SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
 
-	DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-		__func__, phyaddr, phyreg, phydata);
+	DBG(3, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+	    __func__, phyaddr, phyreg, phydata);
 
 	SMC_SELECT_BANK(lp, 2);
 	return phydata;
@@ -857,8 +856,8 @@ static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg,
 	/* Return to idle state */
 	SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
 
-	DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-		__func__, phyaddr, phyreg, phydata);
+	DBG(3, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+	    __func__, phyaddr, phyreg, phydata);
 
 	SMC_SELECT_BANK(lp, 2);
 }
@@ -871,7 +870,7 @@ static void smc_phy_detect(struct net_device *dev)
 	struct smc_local *lp = netdev_priv(dev);
 	int phyaddr;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	lp->phy_type = 0;
 
@@ -886,8 +885,8 @@ static void smc_phy_detect(struct net_device *dev)
 		id1 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID1);
 		id2 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID2);
 
-		DBG(3, "%s: phy_id1=0x%x, phy_id2=0x%x\n",
-			dev->name, id1, id2);
+		DBG(3, dev, "phy_id1=0x%x, phy_id2=0x%x\n",
+		    id1, id2);
 
 		/* Make sure it is a valid identifier */
 		if (id1 != 0x0000 && id1 != 0xffff && id1 != 0x8000 &&
@@ -910,7 +909,7 @@ static int smc_phy_fixed(struct net_device *dev)
 	int phyaddr = lp->mii.phy_id;
 	int bmcr, cfg1;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	/* Enter Link Disable state */
 	cfg1 = smc_phy_read(dev, phyaddr, PHY_CFG1_REG);
@@ -1044,7 +1043,7 @@ static void smc_phy_configure(struct work_struct *work)
 	int my_ad_caps; /* My Advertised capabilities */
 	int status;
 
-	DBG(3, "%s:smc_program_phy()\n", dev->name);
+	DBG(3, dev, "smc_program_phy()\n");
 
 	spin_lock_irq(&lp->lock);
 
@@ -1055,7 +1054,7 @@ static void smc_phy_configure(struct work_struct *work)
 		goto smc_phy_configure_exit;
 
 	if (smc_phy_reset(dev, phyaddr)) {
-		printk("%s: PHY reset timed out\n", dev->name);
+		netdev_info(dev, "PHY reset timed out\n");
 		goto smc_phy_configure_exit;
 	}
 
@@ -1082,7 +1081,7 @@ static void smc_phy_configure(struct work_struct *work)
 	my_phy_caps = smc_phy_read(dev, phyaddr, MII_BMSR);
 
 	if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
-		printk(KERN_INFO "Auto negotiation NOT supported\n");
+		netdev_info(dev, "Auto negotiation NOT supported\n");
 		smc_phy_fixed(dev);
 		goto smc_phy_configure_exit;
 	}
@@ -1118,8 +1117,8 @@ static void smc_phy_configure(struct work_struct *work)
 	 */
 	status = smc_phy_read(dev, phyaddr, MII_ADVERTISE);
 
-	DBG(2, "%s: phy caps=%x\n", dev->name, my_phy_caps);
-	DBG(2, "%s: phy advertised caps=%x\n", dev->name, my_ad_caps);
+	DBG(2, dev, "phy caps=%x\n", my_phy_caps);
+	DBG(2, dev, "phy advertised caps=%x\n", my_ad_caps);
 
 	/* Restart auto-negotiation process in order to advertise my caps */
 	smc_phy_write(dev, phyaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
@@ -1143,7 +1142,7 @@ static void smc_phy_interrupt(struct net_device *dev)
 	int phyaddr = lp->mii.phy_id;
 	int phy18;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	if (lp->phy_type == 0)
 		return;
@@ -1179,8 +1178,8 @@ static void smc_10bt_check_media(struct net_device *dev, int init)
 			netif_carrier_on(dev);
 		}
 		if (netif_msg_link(lp))
-			printk(KERN_INFO "%s: link %s\n", dev->name,
-			       new_carrier ? "up" : "down");
+			netdev_info(dev, "link %s\n",
+				    new_carrier ? "up" : "down");
 	}
 }
 
@@ -1211,7 +1210,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 	int status, mask, timeout, card_stats;
 	int saved_pointer;
 
-	DBG(3, "%s: %s\n", dev->name, __func__);
+	DBG(3, dev, "%s\n", __func__);
 
 	spin_lock(&lp->lock);
 
@@ -1230,12 +1229,12 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 	do {
 		status = SMC_GET_INT(lp);
 
-		DBG(2, "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
-			dev->name, status, mask,
-			({ int meminfo; SMC_SELECT_BANK(lp, 0);
-			   meminfo = SMC_GET_MIR(lp);
-			   SMC_SELECT_BANK(lp, 2); meminfo; }),
-			SMC_GET_FIFO(lp));
+		DBG(2, dev, "INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
+		    status, mask,
+		    ({ int meminfo; SMC_SELECT_BANK(lp, 0);
+		       meminfo = SMC_GET_MIR(lp);
+		       SMC_SELECT_BANK(lp, 2); meminfo; }),
+		    SMC_GET_FIFO(lp));
 
 		status &= mask;
 		if (!status)
@@ -1243,20 +1242,20 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 
 		if (status & IM_TX_INT) {
 			/* do this before RX as it will free memory quickly */
-			DBG(3, "%s: TX int\n", dev->name);
+			DBG(3, dev, "TX int\n");
 			smc_tx(dev);
 			SMC_ACK_INT(lp, IM_TX_INT);
 			if (THROTTLE_TX_PKTS)
 				netif_wake_queue(dev);
 		} else if (status & IM_RCV_INT) {
-			DBG(3, "%s: RX irq\n", dev->name);
+			DBG(3, dev, "RX irq\n");
 			smc_rcv(dev);
 		} else if (status & IM_ALLOC_INT) {
-			DBG(3, "%s: Allocation irq\n", dev->name);
+			DBG(3, dev, "Allocation irq\n");
 			tasklet_hi_schedule(&lp->tx_task);
 			mask &= ~IM_ALLOC_INT;
 		} else if (status & IM_TX_EMPTY_INT) {
-			DBG(3, "%s: TX empty\n", dev->name);
+			DBG(3, dev, "TX empty\n");
 			mask &= ~IM_TX_EMPTY_INT;
 
 			/* update stats */
@@ -1271,10 +1270,10 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 			/* multiple collisions */
 			dev->stats.collisions += card_stats & 0xF;
 		} else if (status & IM_RX_OVRN_INT) {
-			DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name,
-			       ({ int eph_st; SMC_SELECT_BANK(lp, 0);
-				  eph_st = SMC_GET_EPH_STATUS(lp);
-				  SMC_SELECT_BANK(lp, 2); eph_st; }));
+			DBG(1, dev, "RX overrun (EPH_ST 0x%04x)\n",
+			    ({ int eph_st; SMC_SELECT_BANK(lp, 0);
+			       eph_st = SMC_GET_EPH_STATUS(lp);
+			       SMC_SELECT_BANK(lp, 2); eph_st; }));
 			SMC_ACK_INT(lp, IM_RX_OVRN_INT);
 			dev->stats.rx_errors++;
 			dev->stats.rx_fifo_errors++;
@@ -1285,7 +1284,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 			smc_phy_interrupt(dev);
 		} else if (status & IM_ERCV_INT) {
 			SMC_ACK_INT(lp, IM_ERCV_INT);
-			PRINTK("%s: UNSUPPORTED: ERCV INTERRUPT\n", dev->name);
+			PRINTK(dev, "UNSUPPORTED: ERCV INTERRUPT\n");
 		}
 	} while (--timeout);
 
@@ -1296,11 +1295,11 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 
 #ifndef CONFIG_NET_POLL_CONTROLLER
 	if (timeout == MAX_IRQ_LOOPS)
-		PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
-		       dev->name, mask);
+		PRINTK(dev, "spurious interrupt (mask = 0x%02x)\n",
+		       mask);
 #endif
-	DBG(3, "%s: Interrupt done (%d loops)\n",
-	       dev->name, MAX_IRQ_LOOPS - timeout);
+	DBG(3, dev, "Interrupt done (%d loops)\n",
+	    MAX_IRQ_LOOPS - timeout);
 
 	/*
 	 * We return IRQ_HANDLED unconditionally here even if there was
@@ -1333,7 +1332,7 @@ static void smc_timeout(struct net_device *dev)
 	void __iomem *ioaddr = lp->base;
 	int status, mask, eph_st, meminfo, fifo;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	spin_lock_irq(&lp->lock);
 	status = SMC_GET_INT(lp);
@@ -1344,9 +1343,8 @@ static void smc_timeout(struct net_device *dev)
 	meminfo = SMC_GET_MIR(lp);
 	SMC_SELECT_BANK(lp, 2);
 	spin_unlock_irq(&lp->lock);
-	PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x "
-		"MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
-		dev->name, status, mask, meminfo, fifo, eph_st );
+	PRINTK(dev, "TX timeout (INT 0x%02x INTMASK 0x%02x MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
+	       status, mask, meminfo, fifo, eph_st);
 
 	smc_reset(dev);
 	smc_enable(dev);
@@ -1377,10 +1375,10 @@ static void smc_set_multicast_list(struct net_device *dev)
 	unsigned char multicast_table[8];
 	int update_multicast = 0;
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	if (dev->flags & IFF_PROMISC) {
-		DBG(2, "%s: RCR_PRMS\n", dev->name);
+		DBG(2, dev, "RCR_PRMS\n");
 		lp->rcr_cur_mode |= RCR_PRMS;
 	}
 
@@ -1395,7 +1393,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 	 * checked before the table is
 	 */
 	else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
-		DBG(2, "%s: RCR_ALMUL\n", dev->name);
+		DBG(2, dev, "RCR_ALMUL\n");
 		lp->rcr_cur_mode |= RCR_ALMUL;
 	}
 
@@ -1437,7 +1435,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 		/* now, the table can be loaded into the chipset */
 		update_multicast = 1;
 	} else  {
-		DBG(2, "%s: ~(RCR_PRMS|RCR_ALMUL)\n", dev->name);
+		DBG(2, dev, "~(RCR_PRMS|RCR_ALMUL)\n");
 		lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
 
 		/*
@@ -1470,7 +1468,7 @@ smc_open(struct net_device *dev)
 {
 	struct smc_local *lp = netdev_priv(dev);
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	/* Setup the default Register Modes */
 	lp->tcr_cur_mode = TCR_DEFAULT;
@@ -1514,7 +1512,7 @@ static int smc_close(struct net_device *dev)
 {
 	struct smc_local *lp = netdev_priv(dev);
 
-	DBG(2, "%s: %s\n", dev->name, __func__);
+	DBG(2, dev, "%s\n", __func__);
 
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);
@@ -1694,7 +1692,7 @@ static int smc_ethtool_geteeprom(struct net_device *dev,
 	int i;
 	int imax;
 
-	DBG(1, "Reading %d bytes at %d(0x%x)\n",
+	DBG(1, dev, "Reading %d bytes at %d(0x%x)\n",
 		eeprom->len, eeprom->offset, eeprom->offset);
 	imax = smc_ethtool_geteeprom_len(dev);
 	for (i = 0; i < eeprom->len; i += 2) {
@@ -1706,7 +1704,7 @@ static int smc_ethtool_geteeprom(struct net_device *dev,
 		ret = smc_read_eeprom_word(dev, offset >> 1, &wbuf);
 		if (ret != 0)
 			return ret;
-		DBG(2, "Read 0x%x from 0x%x\n", wbuf, offset >> 1);
+		DBG(2, dev, "Read 0x%x from 0x%x\n", wbuf, offset >> 1);
 		data[i] = (wbuf >> 8) & 0xff;
 		data[i+1] = wbuf & 0xff;
 	}
@@ -1719,8 +1717,8 @@ static int smc_ethtool_seteeprom(struct net_device *dev,
 	int i;
 	int imax;
 
-	DBG(1, "Writing %d bytes to %d(0x%x)\n",
-			eeprom->len, eeprom->offset, eeprom->offset);
+	DBG(1, dev, "Writing %d bytes to %d(0x%x)\n",
+	    eeprom->len, eeprom->offset, eeprom->offset);
 	imax = smc_ethtool_geteeprom_len(dev);
 	for (i = 0; i < eeprom->len; i += 2) {
 		int ret;
@@ -1729,7 +1727,7 @@ static int smc_ethtool_seteeprom(struct net_device *dev,
 		if (offset > imax)
 			break;
 		wbuf = (data[i] << 8) | data[i + 1];
-		DBG(2, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1);
+		DBG(2, dev, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1);
 		ret = smc_write_eeprom_word(dev, offset >> 1, wbuf);
 		if (ret != 0)
 			return ret;
@@ -1784,7 +1782,7 @@ static int smc_findirq(struct smc_local *lp)
 	int timeout = 20;
 	unsigned long cookie;
 
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
+	DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
 
 	cookie = probe_irq_on();
 
@@ -1856,21 +1854,21 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 		     unsigned long irq_flags)
 {
 	struct smc_local *lp = netdev_priv(dev);
-	static int version_printed = 0;
 	int retval;
 	unsigned int val, revision_register;
 	const char *version_string;
 
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
+	DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
 
 	/* First, see if the high byte is 0x33 */
 	val = SMC_CURRENT_BANK(lp);
-	DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val);
+	DBG(2, dev, "%s: bank signature probe returned 0x%04x\n",
+	    CARDNAME, val);
 	if ((val & 0xFF00) != 0x3300) {
 		if ((val & 0xFF) == 0x33) {
-			printk(KERN_WARNING
-				"%s: Detected possible byte-swapped interface"
-				" at IOADDR %p\n", CARDNAME, ioaddr);
+			netdev_warn(dev,
+				    "%s: Detected possible byte-swapped interface at IOADDR %p\n",
+				    CARDNAME, ioaddr);
 		}
 		retval = -ENODEV;
 		goto err_out;
@@ -1897,8 +1895,8 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	val = SMC_GET_BASE(lp);
 	val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
 	if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
-		printk("%s: IOADDR %p doesn't match configuration (%x).\n",
-			CARDNAME, ioaddr, val);
+		netdev_warn(dev, "%s: IOADDR %p doesn't match configuration (%x).\n",
+			    CARDNAME, ioaddr, val);
 	}
 
 	/*
@@ -1908,21 +1906,19 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	 */
 	SMC_SELECT_BANK(lp, 3);
 	revision_register = SMC_GET_REV(lp);
-	DBG(2, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
+	DBG(2, dev, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
 	version_string = chip_ids[ (revision_register >> 4) & 0xF];
 	if (!version_string || (revision_register & 0xff00) != 0x3300) {
 		/* I don't recognize this chip, so... */
-		printk("%s: IO %p: Unrecognized revision register 0x%04x"
-			", Contact author.\n", CARDNAME,
-			ioaddr, revision_register);
+		netdev_warn(dev, "%s: IO %p: Unrecognized revision register 0x%04x, Contact author.\n",
+			    CARDNAME, ioaddr, revision_register);
 
 		retval = -ENODEV;
 		goto err_out;
 	}
 
 	/* At this point I'll assume that the chip is an SMC91x. */
-	if (version_printed++ == 0)
-		printk("%s", version);
+	pr_info_once("%s\n", version);
 
 	/* fill in some of the fields */
 	dev->base_addr = (unsigned long)ioaddr;
@@ -1940,7 +1936,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	/*
 	 * If dev->irq is 0, then the device has to be banged on to see
 	 * what the IRQ is.
- 	 *
+	 *
 	 * This banging doesn't always detect the IRQ, for unknown reasons.
 	 * a workaround is to reset the chip and try again.
 	 *
@@ -1965,8 +1961,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 		}
 	}
 	if (dev->irq == 0) {
-		printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
-			dev->name);
+		netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n");
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -2030,32 +2025,31 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	retval = register_netdev(dev);
 	if (retval == 0) {
 		/* now, print out the card info, in a short format.. */
-		printk("%s: %s (rev %d) at %p IRQ %d",
-			dev->name, version_string, revision_register & 0x0f,
-			lp->base, dev->irq);
+		netdev_info(dev, "%s (rev %d) at %p IRQ %d",
+			    version_string, revision_register & 0x0f,
+			    lp->base, dev->irq);
 
 		if (dev->dma != (unsigned char)-1)
-			printk(" DMA %d", dev->dma);
+			pr_cont(" DMA %d", dev->dma);
 
-		printk("%s%s\n",
+		pr_cont("%s%s\n",
 			lp->cfg.flags & SMC91X_NOWAIT ? " [nowait]" : "",
 			THROTTLE_TX_PKTS ? " [throttle_tx]" : "");
 
 		if (!is_valid_ether_addr(dev->dev_addr)) {
-			printk("%s: Invalid ethernet MAC address.  Please "
-			       "set using ifconfig\n", dev->name);
+			netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n");
 		} else {
 			/* Print the Ethernet address */
-			printk("%s: Ethernet addr: %pM\n",
-			       dev->name, dev->dev_addr);
+			netdev_info(dev, "Ethernet addr: %pM\n",
+				    dev->dev_addr);
 		}
 
 		if (lp->phy_type == 0) {
-			PRINTK("%s: No PHY found\n", dev->name);
+			PRINTK(dev, "No PHY found\n");
 		} else if ((lp->phy_type & 0xfffffff0) == 0x0016f840) {
-			PRINTK("%s: PHY LAN83C183 (LAN91C111 Internal)\n", dev->name);
+			PRINTK(dev, "PHY LAN83C183 (LAN91C111 Internal)\n");
 		} else if ((lp->phy_type & 0xfffffff0) == 0x02821c50) {
-			PRINTK("%s: PHY LAN83C180\n", dev->name);
+			PRINTK(dev, "PHY LAN83C180\n");
 		}
 	}
 
@@ -2165,7 +2159,8 @@ static inline void smc_request_datacs(struct platform_device *pdev, struct net_d
 			return;
 
 		if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) {
-			printk(KERN_INFO "%s: failed to request datacs memory region.\n", CARDNAME);
+			netdev_info(ndev, "%s: failed to request datacs memory region.\n",
+				    CARDNAME);
 			return;
 		}
 
@@ -2307,7 +2302,7 @@ static int smc_drv_probe(struct platform_device *pdev)
  out_free_netdev:
 	free_netdev(ndev);
  out:
-	printk("%s: not found (%d).\n", CARDNAME, ret);
+	pr_info("%s: not found (%d).\n", CARDNAME, ret);
 
 	return ret;
 }
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index 98eedb9..c9d4c87 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -907,8 +907,8 @@ static const char * chip_ids[ 16 ] =  {
 	({								\
 		int __b = SMC_CURRENT_BANK(lp);			\
 		if (unlikely((__b & ~0xf0) != (0x3300 | bank))) {	\
-			printk( "%s: bank reg screwed (0x%04x)\n",	\
-				CARDNAME, __b );			\
+			pr_err("%s: bank reg screwed (0x%04x)\n",	\
+			       CARDNAME, __b);				\
 			BUG();						\
 		}							\
 		reg<<SMC_IO_SHIFT;					\
-- 
1.8.4.2

[PATCHv3 net-next 3/7] smc911x: replace printk with netdev_ calls

[Ben Boeckel]

Also fixes an incorrect function comment (probably copy/paste).

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc911x.c | 331 ++++++++++++++++++------------------
 drivers/net/ethernet/smsc/smc911x.h |   2 +-
 2 files changed, 166 insertions(+), 167 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index afe01c4..0f096a8 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -106,16 +106,16 @@ MODULE_ALIAS("platform:smc911x");
 #define POWER_DOWN		 1
 
 #if SMC_DEBUG > 0
-#define DBG(n, args...)				 \
+#define DBG(n, dev, args...)			 \
 	do {					 \
 		if (SMC_DEBUG & (n))		 \
-			printk(args);		 \
+			netdev_dbg(dev, args);	 \
 	} while (0)
 
-#define PRINTK(args...)   printk(args)
+#define PRINTK(dev, args...)   netdev_info(dev, args)
 #else
-#define DBG(n, args...)   do { } while (0)
-#define PRINTK(args...)   printk(KERN_DEBUG args)
+#define DBG(n, dev, args...)   do { } while (0)
+#define PRINTK(dev, args...)   netdev_dbg(dev, args)
 #endif
 
 #if SMC_DEBUG_PKTS > 0
@@ -130,21 +130,23 @@ static void PRINT_PKT(u_char *buf, int length)
 
 	for (i = 0; i < lines ; i ++) {
 		int cur;
+		printk(KERN_DEBUG);
 		for (cur = 0; cur < 8; cur++) {
 			u_char a, b;
 			a = *buf++;
 			b = *buf++;
-			printk("%02x%02x ", a, b);
+			pr_cont("%02x%02x ", a, b);
 		}
-		printk("\n");
+		pr_cont("\n");
 	}
+	printk(KERN_DEBUG);
 	for (i = 0; i < remainder/2 ; i++) {
 		u_char a, b;
 		a = *buf++;
 		b = *buf++;
-		printk("%02x%02x ", a, b);
+		pr_cont("%02x%02x ", a, b);
 	}
-	printk("\n");
+	pr_cont("\n");
 }
 #else
 #define PRINT_PKT(x...)  do { } while (0)
@@ -176,7 +178,7 @@ static void smc911x_reset(struct net_device *dev)
 	unsigned int reg, timeout=0, resets=1, irq_cfg;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	/*	 Take out of PM setting first */
 	if ((SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_) == 0) {
@@ -188,7 +190,7 @@ static void smc911x_reset(struct net_device *dev)
 			reg = SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_;
 		} while (--timeout && !reg);
 		if (timeout == 0) {
-			PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name);
+			PRINTK(dev, "smc911x_reset timeout waiting for PM restore\n");
 			return;
 		}
 	}
@@ -206,14 +208,14 @@ static void smc911x_reset(struct net_device *dev)
 			reg = SMC_GET_HW_CFG(lp);
 			/* If chip indicates reset timeout then try again */
 			if (reg & HW_CFG_SRST_TO_) {
-				PRINTK("%s: chip reset timeout, retrying...\n", dev->name);
+				PRINTK(dev, "chip reset timeout, retrying...\n");
 				resets++;
 				break;
 			}
 		} while (--timeout && (reg & HW_CFG_SRST_));
 	}
 	if (timeout == 0) {
-		PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name);
+		PRINTK(dev, "smc911x_reset timeout waiting for reset\n");
 		return;
 	}
 
@@ -223,7 +225,7 @@ static void smc911x_reset(struct net_device *dev)
 		udelay(10);
 
 	if (timeout == 0){
-		PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name);
+		PRINTK(dev, "smc911x_reset timeout waiting for EEPROM busy\n");
 		return;
 	}
 
@@ -270,7 +272,7 @@ static void smc911x_enable(struct net_device *dev)
 	unsigned mask, cfg, cr;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 
@@ -296,7 +298,7 @@ static void smc911x_enable(struct net_device *dev)
 
 	/* Turn on receiver and enable RX */
 	if (cr & MAC_CR_RXEN_)
-		DBG(SMC_DEBUG_RX, "%s: Receiver already enabled\n", dev->name);
+		DBG(SMC_DEBUG_RX, dev, "Receiver already enabled\n");
 
 	SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_);
 
@@ -327,7 +329,7 @@ static void smc911x_shutdown(struct net_device *dev)
 	unsigned cr;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", CARDNAME, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "%s: --> %s\n", CARDNAME, __func__);
 
 	/* Disable IRQ's */
 	SMC_SET_INT_EN(lp, 0);
@@ -346,7 +348,8 @@ static inline void smc911x_drop_pkt(struct net_device *dev)
 	struct smc911x_local *lp = netdev_priv(dev);
 	unsigned int fifo_count, timeout, reg;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "%s: --> %s\n",
+	    CARDNAME, __func__);
 	fifo_count = SMC_GET_RX_FIFO_INF(lp) & 0xFFFF;
 	if (fifo_count <= 4) {
 		/* Manually dump the packet data */
@@ -361,7 +364,7 @@ static inline void smc911x_drop_pkt(struct net_device *dev)
 			reg = SMC_GET_RX_DP_CTRL(lp) & RX_DP_CTRL_FFWD_BUSY_;
 		} while (--timeout && reg);
 		if (timeout == 0) {
-			PRINTK("%s: timeout waiting for RX fast forward\n", dev->name);
+			PRINTK(dev, "timeout waiting for RX fast forward\n");
 		}
 	}
 }
@@ -379,11 +382,11 @@ static inline void	 smc911x_rcv(struct net_device *dev)
 	struct sk_buff *skb;
 	unsigned char *data;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n",
-		dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "--> %s\n",
+	    __func__);
 	status = SMC_GET_RX_STS_FIFO(lp);
-	DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x\n",
-		dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff);
+	DBG(SMC_DEBUG_RX, dev, "Rx pkt len %d status 0x%08x\n",
+	    (status & 0x3fff0000) >> 16, status & 0xc000ffff);
 	pkt_len = (status & RX_STS_PKT_LEN_) >> 16;
 	if (status & RX_STS_ES_) {
 		/* Deal with a bad packet */
@@ -403,8 +406,7 @@ static inline void	 smc911x_rcv(struct net_device *dev)
 		/* Alloc a buffer with extra room for DMA alignment */
 		skb = netdev_alloc_skb(dev, pkt_len+32);
 		if (unlikely(skb == NULL)) {
-			PRINTK( "%s: Low memory, rcvd packet dropped.\n",
-				dev->name);
+			PRINTK(dev, "Low memory, rcvd packet dropped.\n");
 			dev->stats.rx_dropped++;
 			smc911x_drop_pkt(dev);
 			return;
@@ -422,8 +424,8 @@ static inline void	 smc911x_rcv(struct net_device *dev)
 		/* Lower the FIFO threshold if possible */
 		fifo = SMC_GET_FIFO_INT(lp);
 		if (fifo & 0xFF) fifo--;
-		DBG(SMC_DEBUG_RX, "%s: Setting RX stat FIFO threshold to %d\n",
-			dev->name, fifo & 0xff);
+		DBG(SMC_DEBUG_RX, dev, "Setting RX stat FIFO threshold to %d\n",
+		    fifo & 0xff);
 		SMC_SET_FIFO_INT(lp, fifo);
 		/* Setup RX DMA */
 		SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_));
@@ -436,7 +438,7 @@ static inline void	 smc911x_rcv(struct net_device *dev)
 		SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_));
 		SMC_PULL_DATA(lp, data, pkt_len+2+3);
 
-		DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name);
+		DBG(SMC_DEBUG_PKTS, dev, "Received packet\n");
 		PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64);
 		skb->protocol = eth_type_trans(skb, dev);
 		netif_rx(skb);
@@ -456,7 +458,7 @@ static void smc911x_hardware_send_pkt(struct net_device *dev)
 	unsigned int cmdA, cmdB, len;
 	unsigned char *buf;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", __func__);
 	BUG_ON(lp->pending_tx_skb == NULL);
 
 	skb = lp->pending_tx_skb;
@@ -481,12 +483,12 @@ static void smc911x_hardware_send_pkt(struct net_device *dev)
 	/* tag is packet length so we can use this in stats update later */
 	cmdB = (skb->len  << 16) | (skb->len & 0x7FF);
 
-	DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
-		 dev->name, len, len, buf, cmdA, cmdB);
+	DBG(SMC_DEBUG_TX, dev, "TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
+	    len, len, buf, cmdA, cmdB);
 	SMC_SET_TX_FIFO(lp, cmdA);
 	SMC_SET_TX_FIFO(lp, cmdB);
 
-	DBG(SMC_DEBUG_PKTS, "%s: Transmitted packet\n", dev->name);
+	DBG(SMC_DEBUG_PKTS, dev, "Transmitted packet\n");
 	PRINT_PKT(buf, len <= 64 ? len : 64);
 
 	/* Send pkt via PIO or DMA */
@@ -517,20 +519,20 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int free;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
-		dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n",
+	    __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 
 	BUG_ON(lp->pending_tx_skb != NULL);
 
 	free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_;
-	DBG(SMC_DEBUG_TX, "%s: TX free space %d\n", dev->name, free);
+	DBG(SMC_DEBUG_TX, dev, "TX free space %d\n", free);
 
 	/* Turn off the flow when running out of space in FIFO */
 	if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) {
-		DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n",
-			dev->name, free);
+		DBG(SMC_DEBUG_TX, dev, "Disabling data flow due to low FIFO space (%d)\n",
+		    free);
 		/* Reenable when at least 1 packet of size MTU present */
 		SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64);
 		lp->tx_throttle = 1;
@@ -545,8 +547,8 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 *	  End padding				 15 bytes
 	 */
 	if (unlikely(free < (skb->len + 8 + 15 + 15))) {
-		printk("%s: No Tx free space %d < %d\n",
-			dev->name, free, skb->len);
+		netdev_warn(dev, "No Tx free space %d < %d\n",
+			    free, skb->len);
 		lp->pending_tx_skb = NULL;
 		dev->stats.tx_errors++;
 		dev->stats.tx_dropped++;
@@ -561,13 +563,13 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		 * the DMA IRQ starts it
 		 */
 		if (lp->txdma_active) {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Tx DMA running, deferring packet\n", dev->name);
+			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Tx DMA running, deferring packet\n");
 			lp->pending_tx_skb = skb;
 			netif_stop_queue(dev);
 			spin_unlock_irqrestore(&lp->lock, flags);
 			return NETDEV_TX_OK;
 		} else {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name);
+			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Activating Tx DMA\n");
 			lp->txdma_active = 1;
 		}
 	}
@@ -589,20 +591,19 @@ static void smc911x_tx(struct net_device *dev)
 	struct smc911x_local *lp = netdev_priv(dev);
 	unsigned int tx_status;
 
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
-		dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n",
+	    __func__);
 
 	/* Collect the TX status */
 	while (((SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16) != 0) {
-		DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n",
-			dev->name,
-			(SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16);
+		DBG(SMC_DEBUG_TX, dev, "Tx stat FIFO used 0x%04x\n",
+		    (SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16);
 		tx_status = SMC_GET_TX_STS_FIFO(lp);
 		dev->stats.tx_packets++;
 		dev->stats.tx_bytes+=tx_status>>16;
-		DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n",
-			dev->name, (tx_status & 0xffff0000) >> 16,
-			tx_status & 0x0000ffff);
+		DBG(SMC_DEBUG_TX, dev, "Tx FIFO tag 0x%04x status 0x%04x\n",
+		    (tx_status & 0xffff0000) >> 16,
+		    tx_status & 0x0000ffff);
 		/* count Tx errors, but ignore lost carrier errors when in
 		 * full-duplex mode */
 		if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx &&
@@ -640,8 +641,8 @@ static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg)
 
 	SMC_GET_MII(lp, phyreg, phyaddr, phydata);
 
-	DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n",
-		__func__, phyaddr, phyreg, phydata);
+	DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n",
+	    __func__, phyaddr, phyreg, phydata);
 	return phydata;
 }
 
@@ -654,8 +655,8 @@ static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg,
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 
-	DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-		__func__, phyaddr, phyreg, phydata);
+	DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+	    __func__, phyaddr, phyreg, phydata);
 
 	SMC_SET_MII(lp, phyreg, phyaddr, phydata);
 }
@@ -670,7 +671,7 @@ static void smc911x_phy_detect(struct net_device *dev)
 	int phyaddr;
 	unsigned int cfg, id1, id2;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	lp->phy_type = 0;
 
@@ -731,8 +732,8 @@ static void smc911x_phy_detect(struct net_device *dev)
 			lp->phy_type = id1 << 16 | id2;
 	}
 
-	DBG(SMC_DEBUG_MISC, "%s: phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
-		dev->name, id1, id2, lp->mii.phy_id);
+	DBG(SMC_DEBUG_MISC, dev, "phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
+	    id1, id2, lp->mii.phy_id);
 }
 
 /*
@@ -745,7 +746,7 @@ static int smc911x_phy_fixed(struct net_device *dev)
 	int phyaddr = lp->mii.phy_id;
 	int bmcr;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	/* Enter Link Disable state */
 	SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
@@ -792,7 +793,7 @@ static int smc911x_phy_reset(struct net_device *dev, int phy)
 	unsigned long flags;
 	unsigned int reg;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 	reg = SMC_GET_PMT_CTRL(lp);
@@ -851,18 +852,18 @@ static void smc911x_phy_check_media(struct net_device *dev, int init)
 	int phyaddr = lp->mii.phy_id;
 	unsigned int bmcr, cr;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
 		/* duplex state has changed */
 		SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
 		SMC_GET_MAC_CR(lp, cr);
 		if (lp->mii.full_duplex) {
-			DBG(SMC_DEBUG_MISC, "%s: Configuring for full-duplex mode\n", dev->name);
+			DBG(SMC_DEBUG_MISC, dev, "Configuring for full-duplex mode\n");
 			bmcr |= BMCR_FULLDPLX;
 			cr |= MAC_CR_RCVOWN_;
 		} else {
-			DBG(SMC_DEBUG_MISC, "%s: Configuring for half-duplex mode\n", dev->name);
+			DBG(SMC_DEBUG_MISC, dev, "Configuring for half-duplex mode\n");
 			bmcr &= ~BMCR_FULLDPLX;
 			cr &= ~MAC_CR_RCVOWN_;
 		}
@@ -891,7 +892,7 @@ static void smc911x_phy_configure(struct work_struct *work)
 	int status;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__);
 
 	/*
 	 * We should not be called if phy_type is zero.
@@ -900,7 +901,7 @@ static void smc911x_phy_configure(struct work_struct *work)
 		return;
 
 	if (smc911x_phy_reset(dev, phyaddr)) {
-		printk("%s: PHY reset timed out\n", dev->name);
+		netdev_info(dev, "PHY reset timed out\n");
 		return;
 	}
 	spin_lock_irqsave(&lp->lock, flags);
@@ -922,7 +923,7 @@ static void smc911x_phy_configure(struct work_struct *work)
 	/* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
 	SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps);
 	if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
-		printk(KERN_INFO "Auto negotiation NOT supported\n");
+		netdev_info(dev, "Auto negotiation NOT supported\n");
 		smc911x_phy_fixed(dev);
 		goto smc911x_phy_configure_exit;
 	}
@@ -960,8 +961,8 @@ static void smc911x_phy_configure(struct work_struct *work)
 	udelay(10);
 	SMC_GET_PHY_MII_ADV(lp, phyaddr, status);
 
-	DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps);
-	DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps);
+	DBG(SMC_DEBUG_MISC, dev, "phy caps=0x%04x\n", my_phy_caps);
+	DBG(SMC_DEBUG_MISC, dev, "phy advertised caps=0x%04x\n", my_ad_caps);
 
 	/* Restart auto-negotiation process in order to advertise my caps */
 	SMC_SET_PHY_BMCR(lp, phyaddr, BMCR_ANENABLE | BMCR_ANRESTART);
@@ -984,7 +985,7 @@ static void smc911x_phy_interrupt(struct net_device *dev)
 	int phyaddr = lp->mii.phy_id;
 	int status;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	if (lp->phy_type == 0)
 		return;
@@ -992,10 +993,10 @@ static void smc911x_phy_interrupt(struct net_device *dev)
 	smc911x_phy_check_media(dev, 0);
 	/* read to clear status bits */
 	SMC_GET_PHY_INT_SRC(lp, phyaddr,status);
-	DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n",
-		dev->name, status & 0xffff);
-	DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n",
-		dev->name, SMC_GET_AFC_CFG(lp));
+	DBG(SMC_DEBUG_MISC, dev, "PHY interrupt status 0x%04x\n",
+	    status & 0xffff);
+	DBG(SMC_DEBUG_MISC, dev, "AFC_CFG 0x%08x\n",
+	    SMC_GET_AFC_CFG(lp));
 }
 
 /*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
@@ -1012,7 +1013,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 	unsigned int rx_overrun=0, cr, pkts;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 
@@ -1033,8 +1034,8 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 	do {
 		status = SMC_GET_INT(lp);
 
-		DBG(SMC_DEBUG_MISC, "%s: INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n",
-			dev->name, status, mask, status & ~mask);
+		DBG(SMC_DEBUG_MISC, dev, "INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n",
+		    status, mask, status & ~mask);
 
 		status &= mask;
 		if (!status)
@@ -1066,7 +1067,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 				SMC_GET_MAC_CR(lp, cr);
 				cr &= ~MAC_CR_RXEN_;
 				SMC_SET_MAC_CR(lp, cr);
-				DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
+				DBG(SMC_DEBUG_RX, dev, "RX overrun\n");
 				dev->stats.rx_errors++;
 				dev->stats.rx_fifo_errors++;
 			}
@@ -1078,7 +1079,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 				cr &= ~MAC_CR_RXEN_;
 				SMC_SET_MAC_CR(lp, cr);
 				rx_overrun=1;
-				DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
+				DBG(SMC_DEBUG_RX, dev, "RX overrun\n");
 				dev->stats.rx_errors++;
 				dev->stats.rx_fifo_errors++;
 			}
@@ -1087,23 +1088,23 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 		/* Handle receive condition */
 		if ((status & INT_STS_RSFL_) || rx_overrun) {
 			unsigned int fifo;
-			DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name);
+			DBG(SMC_DEBUG_RX, dev, "RX irq\n");
 			fifo = SMC_GET_RX_FIFO_INF(lp);
 			pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16;
-			DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n",
-				dev->name, pkts, fifo & 0xFFFF );
+			DBG(SMC_DEBUG_RX, dev, "Rx FIFO pkts %d, bytes %d\n",
+			    pkts, fifo & 0xFFFF);
 			if (pkts != 0) {
 #ifdef SMC_USE_DMA
 				unsigned int fifo;
 				if (lp->rxdma_active){
-					DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
-						"%s: RX DMA active\n", dev->name);
+					DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev,
+					    "RX DMA active\n");
 					/* The DMA is already running so up the IRQ threshold */
 					fifo = SMC_GET_FIFO_INT(lp) & ~0xFF;
 					fifo |= pkts & 0xFF;
-					DBG(SMC_DEBUG_RX,
-						"%s: Setting RX stat FIFO threshold to %d\n",
-						dev->name, fifo & 0xff);
+					DBG(SMC_DEBUG_RX, dev,
+					    "Setting RX stat FIFO threshold to %d\n",
+					    fifo & 0xff);
 					SMC_SET_FIFO_INT(lp, fifo);
 				} else
 #endif
@@ -1113,7 +1114,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 		}
 		/* Handle transmit FIFO available */
 		if (status & INT_STS_TDFA_) {
-			DBG(SMC_DEBUG_TX, "%s: TX data FIFO space available irq\n", dev->name);
+			DBG(SMC_DEBUG_TX, dev, "TX data FIFO space available irq\n");
 			SMC_SET_FIFO_TDA(lp, 0xFF);
 			lp->tx_throttle = 0;
 #ifdef SMC_USE_DMA
@@ -1125,9 +1126,9 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 		/* Handle transmit done condition */
 #if 1
 		if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC,
-				"%s: Tx stat FIFO limit (%d) /GPT irq\n",
-				dev->name, (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16);
+			DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, dev,
+			    "Tx stat FIFO limit (%d) /GPT irq\n",
+			    (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16);
 			smc911x_tx(dev);
 			SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
 			SMC_ACK_INT(lp, INT_STS_TSFL_);
@@ -1135,23 +1136,20 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 		}
 #else
 		if (status & INT_STS_TSFL_) {
-			DBG(SMC_DEBUG_TX, "%s: TX status FIFO limit (%d) irq\n", dev->name, );
+			DBG(SMC_DEBUG_TX, dev, "TX status FIFO limit (%d) irq\n", ?);
 			smc911x_tx(dev);
 			SMC_ACK_INT(lp, INT_STS_TSFL_);
 		}
 
 		if (status & INT_STS_GPT_INT_) {
-			DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
-				dev->name,
-				SMC_GET_IRQ_CFG(lp),
-				SMC_GET_FIFO_INT(lp),
-				SMC_GET_RX_CFG(lp));
-			DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x "
-				"Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
-				dev->name,
-				(SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16,
-				SMC_GET_RX_FIFO_INF(lp) & 0xffff,
-				SMC_GET_RX_STS_FIFO_PEEK(lp));
+			DBG(SMC_DEBUG_RX, dev, "IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
+			    SMC_GET_IRQ_CFG(lp),
+			    SMC_GET_FIFO_INT(lp),
+			    SMC_GET_RX_CFG(lp));
+			DBG(SMC_DEBUG_RX, dev, "Rx Stat FIFO Used 0x%02x Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
+			    (SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16,
+			    SMC_GET_RX_FIFO_INF(lp) & 0xffff,
+			    SMC_GET_RX_STS_FIFO_PEEK(lp));
 			SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
 			SMC_ACK_INT(lp, INT_STS_GPT_INT_);
 		}
@@ -1159,7 +1157,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 
 		/* Handle PHY interrupt condition */
 		if (status & INT_STS_PHY_INT_) {
-			DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name);
+			DBG(SMC_DEBUG_MISC, dev, "PHY irq\n");
 			smc911x_phy_interrupt(dev);
 			SMC_ACK_INT(lp, INT_STS_PHY_INT_);
 		}
@@ -1168,8 +1166,8 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
 	/* restore mask state */
 	SMC_SET_INT_EN(lp, mask);
 
-	DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n",
-		dev->name, 8-timeout);
+	DBG(SMC_DEBUG_MISC, dev, "Interrupt done (%d loops)\n",
+	    8-timeout);
 
 	spin_unlock_irqrestore(&lp->lock, flags);
 
@@ -1185,9 +1183,9 @@ smc911x_tx_dma_irq(int dma, void *data)
 	struct sk_buff *skb = lp->current_tx_skb;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
-	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: TX DMA irq handler\n", dev->name);
+	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "TX DMA irq handler\n");
 	/* Clear the DMA interrupt sources */
 	SMC_DMA_ACK_IRQ(dev, dma);
 	BUG_ON(skb == NULL);
@@ -1198,8 +1196,8 @@ smc911x_tx_dma_irq(int dma, void *data)
 	if (lp->pending_tx_skb != NULL)
 		smc911x_hardware_send_pkt(dev);
 	else {
-		DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
-			"%s: No pending Tx packets. DMA disabled\n", dev->name);
+		DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev,
+		    "No pending Tx packets. DMA disabled\n");
 		spin_lock_irqsave(&lp->lock, flags);
 		lp->txdma_active = 0;
 		if (!lp->tx_throttle) {
@@ -1208,8 +1206,8 @@ smc911x_tx_dma_irq(int dma, void *data)
 		spin_unlock_irqrestore(&lp->lock, flags);
 	}
 
-	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
-		"%s: TX DMA irq completed\n", dev->name);
+	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev,
+	    "TX DMA irq completed\n");
 }
 static void
 smc911x_rx_dma_irq(int dma, void *data)
@@ -1221,8 +1219,8 @@ smc911x_rx_dma_irq(int dma, void *data)
 	unsigned long flags;
 	unsigned int pkts;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
-	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, "%s: RX DMA irq handler\n", dev->name);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, "RX DMA irq handler\n");
 	/* Clear the DMA interrupt sources */
 	SMC_DMA_ACK_IRQ(dev, dma);
 	dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE);
@@ -1242,9 +1240,9 @@ smc911x_rx_dma_irq(int dma, void *data)
 		lp->rxdma_active = 0;
 	}
 	spin_unlock_irqrestore(&lp->lock, flags);
-	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
-		"%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n",
-		dev->name, pkts);
+	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev,
+	    "RX DMA irq completed. DMA RX FIFO PKTS %d\n",
+	    pkts);
 }
 #endif	 /* SMC_USE_DMA */
 
@@ -1268,14 +1266,14 @@ static void smc911x_timeout(struct net_device *dev)
 	int status, mask;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 	status = SMC_GET_INT(lp);
 	mask = SMC_GET_INT_EN(lp);
 	spin_unlock_irqrestore(&lp->lock, flags);
-	DBG(SMC_DEBUG_MISC, "%s: INT 0x%02x MASK 0x%02x\n",
-		dev->name, status, mask);
+	DBG(SMC_DEBUG_MISC, dev, "INT 0x%02x MASK 0x%02x\n",
+	    status, mask);
 
 	/* Dump the current TX FIFO contents and restart */
 	mask = SMC_GET_TX_CFG(lp);
@@ -1306,7 +1304,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	unsigned int mcr, update_multicast = 0;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	spin_lock_irqsave(&lp->lock, flags);
 	SMC_GET_MAC_CR(lp, mcr);
@@ -1314,7 +1312,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {
 
-		DBG(SMC_DEBUG_MISC, "%s: RCR_PRMS\n", dev->name);
+		DBG(SMC_DEBUG_MISC, dev, "RCR_PRMS\n");
 		mcr |= MAC_CR_PRMS_;
 	}
 	/*
@@ -1323,7 +1321,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	 * checked before the table is
 	 */
 	else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
-		DBG(SMC_DEBUG_MISC, "%s: RCR_ALMUL\n", dev->name);
+		DBG(SMC_DEBUG_MISC, dev, "RCR_ALMUL\n");
 		mcr |= MAC_CR_MCPAS_;
 	}
 
@@ -1363,8 +1361,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 		/* now, the table can be loaded into the chipset */
 		update_multicast = 1;
 	} else	 {
-		DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n",
-			dev->name);
+		DBG(SMC_DEBUG_MISC, dev, "~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n");
 		mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
 
 		/*
@@ -1378,9 +1375,9 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	spin_lock_irqsave(&lp->lock, flags);
 	SMC_SET_MAC_CR(lp, mcr);
 	if (update_multicast) {
-		DBG(SMC_DEBUG_MISC,
-			"%s: update mcast hash table 0x%08x 0x%08x\n",
-			dev->name, multicast_table[0], multicast_table[1]);
+		DBG(SMC_DEBUG_MISC, dev,
+		    "update mcast hash table 0x%08x 0x%08x\n",
+		    multicast_table[0], multicast_table[1]);
 		SMC_SET_HASHL(lp, multicast_table[0]);
 		SMC_SET_HASHH(lp, multicast_table[1]);
 	}
@@ -1398,7 +1395,7 @@ smc911x_open(struct net_device *dev)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	/* reset the hardware */
 	smc911x_reset(dev);
@@ -1425,7 +1422,7 @@ static int smc911x_close(struct net_device *dev)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);
@@ -1459,7 +1456,7 @@ smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
 	int ret, status;
 	unsigned long flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 	cmd->maxtxpkt = 1;
 	cmd->maxrxpkt = 1;
 
@@ -1597,16 +1594,16 @@ static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev)
 	e2p_cmd = SMC_GET_E2P_CMD(lp);
 	for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) {
 		if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) {
-			PRINTK("%s: %s timeout waiting for EEPROM to respond\n",
-				dev->name, __func__);
+			PRINTK(dev, "%s timeout waiting for EEPROM to respond\n",
+			       __func__);
 			return -EFAULT;
 		}
 		mdelay(1);
 		e2p_cmd = SMC_GET_E2P_CMD(lp);
 	}
 	if (timeout == 0) {
-		PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n",
-			dev->name, __func__);
+		PRINTK(dev, "%s timeout waiting for EEPROM CMD not busy\n",
+		       __func__);
 		return -ETIMEDOUT;
 	}
 	return 0;
@@ -1719,7 +1716,7 @@ static int smc911x_findirq(struct net_device *dev)
 	int timeout = 20;
 	unsigned long cookie;
 
-	DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	cookie = probe_irq_on();
 
@@ -1799,13 +1796,14 @@ static int smc911x_probe(struct net_device *dev)
 	const char *version_string;
 	unsigned long irq_flags;
 
-	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
+	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
 
 	/* First, see if the endian word is recognized */
 	val = SMC_GET_BYTE_TEST(lp);
-	DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val);
+	DBG(SMC_DEBUG_MISC, dev, "%s: endian probe returned 0x%04x\n",
+	    CARDNAME, val);
 	if (val != 0x87654321) {
-		printk(KERN_ERR "Invalid chip endian 0x%08x\n",val);
+		netdev_err(dev, "Invalid chip endian 0x%08x\n", val);
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -1816,26 +1814,29 @@ static int smc911x_probe(struct net_device *dev)
 	 * as future revisions could be added.
 	 */
 	chip_id = SMC_GET_PN(lp);
-	DBG(SMC_DEBUG_MISC, "%s: id probe returned 0x%04x\n", CARDNAME, chip_id);
+	DBG(SMC_DEBUG_MISC, dev, "%s: id probe returned 0x%04x\n",
+	    CARDNAME, chip_id);
 	for(i=0;chip_ids[i].id != 0; i++) {
 		if (chip_ids[i].id == chip_id) break;
 	}
 	if (!chip_ids[i].id) {
-		printk(KERN_ERR "Unknown chip ID %04x\n", chip_id);
+		netdev_err(dev, "Unknown chip ID %04x\n", chip_id);
 		retval = -ENODEV;
 		goto err_out;
 	}
 	version_string = chip_ids[i].name;
 
 	revision = SMC_GET_REV(lp);
-	DBG(SMC_DEBUG_MISC, "%s: revision = 0x%04x\n", CARDNAME, revision);
+	DBG(SMC_DEBUG_MISC, dev, "%s: revision = 0x%04x\n", CARDNAME, revision);
 
 	/* At this point I'll assume that the chip is an SMC911x. */
-	DBG(SMC_DEBUG_MISC, "%s: Found a %s\n", CARDNAME, chip_ids[i].name);
+	DBG(SMC_DEBUG_MISC, dev, "%s: Found a %s\n",
+	    CARDNAME, chip_ids[i].name);
 
 	/* Validate the TX FIFO size requested */
 	if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) {
-		printk(KERN_ERR "Invalid TX FIFO size requested %d\n", tx_fifo_kb);
+		netdev_err(dev, "Invalid TX FIFO size requested %d\n",
+			   tx_fifo_kb);
 		retval = -EINVAL;
 		goto err_out;
 	}
@@ -1887,14 +1888,13 @@ static int smc911x_probe(struct net_device *dev)
 		case 14:/* 1920 Rx Data Fifo Size */
 			lp->afc_cfg=0x0006032F;break;
 		 default:
-			 PRINTK("%s: ERROR -- no AFC_CFG setting found",
-				dev->name);
+			 PRINTK(dev, "ERROR -- no AFC_CFG setting found");
 			 break;
 	}
 
-	DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX,
-		"%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
-		lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
+	DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, dev,
+	    "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
+	    lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
 
 	spin_lock_init(&lp->lock);
 
@@ -1924,8 +1924,7 @@ static int smc911x_probe(struct net_device *dev)
 		}
 	}
 	if (dev->irq == 0) {
-		printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
-			dev->name);
+		netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n");
 		retval = -ENODEV;
 		goto err_out;
 	}
@@ -1980,33 +1979,32 @@ static int smc911x_probe(struct net_device *dev)
 	retval = register_netdev(dev);
 	if (retval == 0) {
 		/* now, print out the card info, in a short format.. */
-		printk("%s: %s (rev %d) at %#lx IRQ %d",
-			dev->name, version_string, lp->revision,
-			dev->base_addr, dev->irq);
+		netdev_info(dev, "%s (rev %d) at %#lx IRQ %d",
+			    version_string, lp->revision,
+			    dev->base_addr, dev->irq);
 
 #ifdef SMC_USE_DMA
 		if (lp->rxdma != -1)
-			printk(" RXDMA %d ", lp->rxdma);
+			pr_cont(" RXDMA %d", lp->rxdma);
 
 		if (lp->txdma != -1)
-			printk("TXDMA %d", lp->txdma);
+			pr_cont(" TXDMA %d", lp->txdma);
 #endif
-		printk("\n");
+		pr_cont("\n");
 		if (!is_valid_ether_addr(dev->dev_addr)) {
-			printk("%s: Invalid ethernet MAC address. Please "
-					"set using ifconfig\n", dev->name);
+			netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n");
 		} else {
 			/* Print the Ethernet address */
-			printk("%s: Ethernet addr: %pM\n",
-				dev->name, dev->dev_addr);
+			netdev_info(dev, "Ethernet addr: %pM\n",
+				    dev->dev_addr);
 		}
 
 		if (lp->phy_type == 0) {
-			PRINTK("%s: No PHY found\n", dev->name);
+			PRINTK(dev, "No PHY found\n");
 		} else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) {
-			PRINTK("%s: LAN911x Internal PHY\n", dev->name);
+			PRINTK(dev, "LAN911x Internal PHY\n");
 		} else {
-			PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type);
+			PRINTK(dev, "External PHY 0x%08x\n", lp->phy_type);
 		}
 	}
 
@@ -2025,7 +2023,7 @@ err_out:
 }
 
 /*
- * smc911x_init(void)
+ * smc911x_drv_probe(void)
  *
  *	  Output:
  *	 0 --> there is a device
@@ -2039,6 +2037,7 @@ static int smc911x_drv_probe(struct platform_device *pdev)
 	void __iomem *addr;
 	int ret;
 
+	/* ndev is not valid yet, so avoid passing it in. */
 	DBG(SMC_DEBUG_FUNC, "--> %s\n",  __func__);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -2093,7 +2092,7 @@ release_both:
 release_1:
 		release_mem_region(res->start, SMC911X_IO_EXTENT);
 out:
-		printk("%s: not found (%d).\n", CARDNAME, ret);
+		pr_info("%s: not found (%d).\n", CARDNAME, ret);
 	}
 #ifdef SMC_USE_DMA
 	else {
@@ -2111,7 +2110,7 @@ static int smc911x_drv_remove(struct platform_device *pdev)
 	struct smc911x_local *lp = netdev_priv(ndev);
 	struct resource *res;
 
-	DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
 
 	unregister_netdev(ndev);
 
@@ -2140,7 +2139,7 @@ static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state)
 	struct net_device *ndev = platform_get_drvdata(dev);
 	struct smc911x_local *lp = netdev_priv(ndev);
 
-	DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
 	if (ndev) {
 		if (netif_running(ndev)) {
 			netif_device_detach(ndev);
@@ -2158,7 +2157,7 @@ static int smc911x_drv_resume(struct platform_device *dev)
 {
 	struct net_device *ndev = platform_get_drvdata(dev);
 
-	DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
+	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
 	if (ndev) {
 		struct smc911x_local *lp = netdev_priv(ndev);
 
diff --git a/drivers/net/ethernet/smsc/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
index d51261b..9965da3 100644
--- a/drivers/net/ethernet/smsc/smc911x.h
+++ b/drivers/net/ethernet/smsc/smc911x.h
@@ -227,7 +227,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
 #define SMC_DMA_ACK_IRQ(dev, dma)					\
 {									\
 	if (DCSR(dma) & DCSR_BUSERR) {					\
-		printk("%s: DMA %d bus error!\n", dev->name, dma);	\
+		netdev_err(dev, "DMA %d bus error!\n", dma);		\
 	}								\
 	DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;		\
 }
-- 
1.8.4.2

[PATCHv3 net-next 4/7] smsc911x: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smsc911x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 01f8459..8564f23 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2167,7 +2167,7 @@ static int smsc911x_init(struct net_device *dev)
 		udelay(1000);
 
 	if (to == 0) {
-		pr_err("Device not READY in 100ms aborting\n");
+		netdev_err(dev, "Device not READY in 100ms aborting\n");
 		return -ENODEV;
 	}
 
-- 
1.8.4.2

[PATCHv3 net-next 5/7] smc9194: replace printk with netdev_ calls

[Ben Boeckel]

Also snipes some whitespace errors.

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc9194.c | 52 ++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index e85c2e7..51aa9cf 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -55,7 +55,7 @@
  ----------------------------------------------------------------------------*/
 
 static const char version[] =
-	"smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)\n";
+	"smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)";
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -612,7 +612,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 	packet_no = inb( ioaddr + PNR_ARR + 1 );
 	if ( packet_no & 0x80 ) {
 		/* or isn't there?  BAD CHIP! */
-		printk(KERN_DEBUG CARDNAME": Memory allocation failed.\n");
+		netdev_dbg(dev, CARDNAME": Memory allocation failed.\n");
 		dev_kfree_skb_any(skb);
 		lp->saved_skb = NULL;
 		netif_wake_queue(dev);
@@ -625,7 +625,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 	/* point to the beginning of the packet */
 	outw( PTR_AUTOINC , ioaddr + POINTER );
 
-   	PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length ));
+	PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length));
 #if SMC_DEBUG > 2
 	print_packet( buf, length );
 #endif
@@ -865,7 +865,6 @@ static const struct net_device_ops smc_netdev_ops = {
 static int __init smc_probe(struct net_device *dev, int ioaddr)
 {
 	int i, memory, retval;
-	static unsigned version_printed;
 	unsigned int bank;
 
 	const char *version_string;
@@ -937,8 +936,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 	   It might be prudent to check a listing of MAC addresses
 	   against the hardware address, or do some other tests. */
 
-	if (version_printed++ == 0)
-		printk("%s", version);
+	pr_info_once("%s\n", version);
 
 	/* fill in some of the fields */
 	dev->base_addr = ioaddr;
@@ -1027,21 +1025,21 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 
 	/* now, print out the card info, in a short format.. */
 
-	printk("%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
-		version_string, revision_register & 0xF, ioaddr, dev->irq,
-		if_string, memory );
+	netdev_info(dev, "%s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ",
+		    version_string, revision_register & 0xF, ioaddr, dev->irq,
+		    if_string, memory);
 	/*
 	 . Print the Ethernet address
 	*/
-	printk("ADDR: %pM\n", dev->dev_addr);
+	netdev_info(dev, "ADDR: %pM\n", dev->dev_addr);
 
 	/* Grab the IRQ */
-      	retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
-      	if (retval) {
-		printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
-			dev->irq, retval);
-  	  	goto err_out;
-      	}
+	retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
+	if (retval) {
+		netdev_warn(dev, "%s: unable to get IRQ %d (irqval=%d).\n",
+			    DRV_NAME, dev->irq, retval);
+		goto err_out;
+	}
 
 	dev->netdev_ops			= &smc_netdev_ops;
 	dev->watchdog_timeo		= HZ/20;
@@ -1061,30 +1059,32 @@ static void print_packet( byte * buf, int length )
 	int remainder;
 	int lines;
 
-	printk("Packet of length %d\n", length);
+	pr_dbg("Packet of length %d\n", length);
 	lines = length / 16;
 	remainder = length % 16;
 
 	for ( i = 0; i < lines ; i ++ ) {
 		int cur;
 
+		printk(KERN_DEBUG);
 		for ( cur = 0; cur < 8; cur ++ ) {
 			byte a, b;
 
 			a = *(buf ++ );
 			b = *(buf ++ );
-			printk("%02x%02x ", a, b );
+			pr_cont("%02x%02x ", a, b);
 		}
-		printk("\n");
+		pr_cont("\n");
 	}
+	printk(KERN_DEBUG);
 	for ( i = 0; i < remainder/2 ; i++ ) {
 		byte a, b;
 
 		a = *(buf ++ );
 		b = *(buf ++ );
-		printk("%02x%02x ", a, b );
+		pr_cont("%02x%02x ", a, b);
 	}
-	printk("\n");
+	pr_cont("\n");
 #endif
 }
 #endif
@@ -1151,9 +1151,8 @@ static void smc_timeout(struct net_device *dev)
 {
 	/* If we get here, some higher level has decided we are broken.
 	   There should really be a "kick me" function call instead. */
-	printk(KERN_WARNING CARDNAME": transmit timed out, %s?\n",
-		tx_done(dev) ? "IRQ conflict" :
-		"network cable problem");
+	netdev_warn(dev, CARDNAME": transmit timed out, %s?\n",
+		    tx_done(dev) ? "IRQ conflict" : "network cable problem");
 	/* "kick" the adaptor */
 	smc_reset( dev->base_addr );
 	smc_enable( dev->base_addr );
@@ -1323,8 +1322,7 @@ static void smc_tx( struct net_device * dev )
 	dev->stats.tx_errors++;
 	if ( tx_status & TS_LOSTCAR ) dev->stats.tx_carrier_errors++;
 	if ( tx_status & TS_LATCOL  ) {
-		printk(KERN_DEBUG CARDNAME
-			": Late collision occurred on last xmit.\n");
+		netdev_dbg(dev, CARDNAME": Late collision occurred on last xmit.\n");
 		dev->stats.tx_window_errors++;
 	}
 #if 0
@@ -1332,7 +1330,7 @@ static void smc_tx( struct net_device * dev )
 #endif
 
 	if ( tx_status & TS_SUCCESS ) {
-		printk(CARDNAME": Successful packet caused interrupt\n");
+		netdev_info(dev, CARDNAME": Successful packet caused interrupt\n");
 	}
 	/* re-enable transmit */
 	SMC_SELECT_BANK( 0 );
-- 
1.8.4.2

[PATCHv3 net-next 6/7] smc91c92_cs: replace printk with netdev_ calls

[Ben Boeckel]

Also snipes some trailing whitespace.

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smc91c92_cs.c | 43 ++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c
index 656d2e2..8ef70d9 100644
--- a/drivers/net/ethernet/smsc/smc91c92_cs.c
+++ b/drivers/net/ethernet/smsc/smc91c92_cs.c
@@ -740,7 +740,7 @@ static int smc91c92_resume(struct pcmcia_device *link)
 	     (smc->cardid == PRODID_PSION_NET100))) {
 		i = osi_load_firmware(link);
 		if (i) {
-			pr_err("smc91c92_cs: Failed to load firmware\n");
+			netdev_err(dev, "Failed to load firmware\n");
 			return i;
 		}
 	}
@@ -793,7 +793,7 @@ static int check_sig(struct pcmcia_device *link)
     }
 
     if (width) {
-	    pr_info("using 8-bit IO window\n");
+	    netdev_info(dev, "using 8-bit IO window\n");
 
 	    smc91c92_suspend(link);
 	    pcmcia_fixup_iowidth(link);
@@ -1036,7 +1036,7 @@ static void smc_dump(struct net_device *dev)
     save = inw(ioaddr + BANK_SELECT);
     for (w = 0; w < 4; w++) {
 	SMC_SELECT_BANK(w);
-	netdev_printk(KERN_DEBUG, dev, "bank %d: ", w);
+	netdev_dbg(dev, "bank %d: ", w);
 	for (i = 0; i < 14; i += 2)
 	    pr_cont(" %04x", inw(ioaddr + i));
 	pr_cont("\n");
@@ -1213,8 +1213,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
     if (smc->saved_skb) {
 	/* THIS SHOULD NEVER HAPPEN. */
 	dev->stats.tx_aborted_errors++;
-	netdev_printk(KERN_DEBUG, dev,
-		      "Internal error -- sent packet while busy\n");
+	netdev_dbg(dev, "Internal error -- sent packet while busy\n");
 	return NETDEV_TX_BUSY;
     }
     smc->saved_skb = skb;
@@ -1254,7 +1253,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
     }
 
     /* Otherwise defer until the Tx-space-allocated interrupt. */
-    pr_debug("%s: memory allocation deferred.\n", dev->name);
+    netdev_dbg(dev, "memory allocation deferred.\n");
     outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
     spin_unlock_irqrestore(&smc->lock, flags);
 
@@ -1317,8 +1316,8 @@ static void smc_eph_irq(struct net_device *dev)
 
     SMC_SELECT_BANK(0);
     ephs = inw(ioaddr + EPH);
-    pr_debug("%s: Ethernet protocol handler interrupt, status"
-	  " %4.4x.\n", dev->name, ephs);
+    netdev_dbg(dev, "Ethernet protocol handler interrupt, status %4.4x.\n",
+	       ephs);
     /* Could be a counter roll-over warning: update stats. */
     card_stats = inw(ioaddr + COUNTER);
     /* single collisions */
@@ -1357,8 +1356,8 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 
     ioaddr = dev->base_addr;
 
-    pr_debug("%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
-	  irq, ioaddr);
+    netdev_dbg(dev, "SMC91c92 interrupt %d at %#x.\n",
+	       irq, ioaddr);
 
     spin_lock(&smc->lock);
     smc->watchdog = 0;
@@ -1366,8 +1365,8 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
     if ((saved_bank & 0xff00) != 0x3300) {
 	/* The device does not exist -- the card could be off-line, or
 	   maybe it has been ejected. */
-	pr_debug("%s: SMC91c92 interrupt %d for non-existent"
-	      "/ejected device.\n", dev->name, irq);
+	netdev_dbg(dev, "SMC91c92 interrupt %d for non-existent/ejected device.\n",
+		   irq);
 	handled = 0;
 	goto irq_done;
     }
@@ -1380,8 +1379,8 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 
     do { /* read the status flag, and mask it */
 	status = inw(ioaddr + INTERRUPT) & 0xff;
-	pr_debug("%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
-	      status, mask);
+	netdev_dbg(dev, "Status is %#2.2x (mask %#2.2x).\n",
+		   status, mask);
 	if ((status & mask) == 0) {
 	    if (bogus_cnt == INTR_WORK)
 		handled = 0;
@@ -1425,15 +1424,15 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 	    smc_eph_irq(dev);
     } while (--bogus_cnt);
 
-    pr_debug("  Restoring saved registers mask %2.2x bank %4.4x"
-	  " pointer %4.4x.\n", mask, saved_bank, saved_pointer);
+    netdev_dbg(dev, "  Restoring saved registers mask %2.2x bank %4.4x pointer %4.4x.\n",
+	       mask, saved_bank, saved_pointer);
 
     /* restore state register */
     outw((mask<<8), ioaddr + INTERRUPT);
     outw(saved_pointer, ioaddr + POINTER);
     SMC_SELECT_BANK(saved_bank);
 
-    pr_debug("%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
+    netdev_dbg(dev, "Exiting interrupt IRQ%d.\n", irq);
 
 irq_done:
 
@@ -1491,10 +1490,10 @@ static void smc_rx(struct net_device *dev)
     rx_status = inw(ioaddr + DATA_1);
     packet_length = inw(ioaddr + DATA_1) & 0x07ff;
 
-    pr_debug("%s: Receive status %4.4x length %d.\n",
-	  dev->name, rx_status, packet_length);
+    netdev_dbg(dev, "Receive status %4.4x length %d.\n",
+	       rx_status, packet_length);
 
-    if (!(rx_status & RS_ERRORS)) {		
+    if (!(rx_status & RS_ERRORS)) {
 	/* do stuff to make a new packet */
 	struct sk_buff *skb;
 	
@@ -1502,7 +1501,7 @@ static void smc_rx(struct net_device *dev)
 	skb = netdev_alloc_skb(dev, packet_length+2);
 	
 	if (skb == NULL) {
-	    pr_debug("%s: Low memory, packet dropped.\n", dev->name);
+	    netdev_dbg(dev, "Low memory, packet dropped.\n");
 	    dev->stats.rx_dropped++;
 	    outw(MC_RELEASE, ioaddr + MMU_CMD);
 	    return;
@@ -1643,7 +1642,7 @@ static void smc_reset(struct net_device *dev)
     struct smc_private *smc = netdev_priv(dev);
     int i;
 
-    pr_debug("%s: smc91c92 reset called.\n", dev->name);
+    netdev_dbg(dev, "smc91c92 reset called.\n");
 
     /* The first interaction must be a write to bring the chip out
        of sleep mode. */
-- 
1.8.4.2

[PATCHv3 net-next 7/7] smsc9420: replace printk with netdev_ calls

[Ben Boeckel]

Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
---
 drivers/net/ethernet/smsc/smsc9420.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
index e55e336..059bcaf 100644
--- a/drivers/net/ethernet/smsc/smsc9420.c
+++ b/drivers/net/ethernet/smsc/smsc9420.c
@@ -99,17 +99,17 @@ MODULE_PARM_DESC(debug, "debug level");
 
 #define smsc_dbg(TYPE, f, a...) \
 do {	if ((pd)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_DEBUG PFX f "\n", ## a); \
+		netdev_dbg((pd)->dev, PFX f "\n", ## a); \
 } while (0)
 
 #define smsc_info(TYPE, f, a...) \
 do {	if ((pd)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_INFO PFX f "\n", ## a); \
+		netdev_info((pd)->dev, PFX f "\n", ## a); \
 } while (0)
 
 #define smsc_warn(TYPE, f, a...) \
 do {	if ((pd)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_WARNING PFX f "\n", ## a); \
+		netdev_warn((pd)->dev, PFX f "\n", ## a); \
 } while (0)
 
 static inline u32 smsc9420_reg_read(struct smsc9420_pdata *pd, u32 offset)
@@ -1168,7 +1168,7 @@ static int smsc9420_mii_probe(struct net_device *dev)
 
 	/* Device only supports internal PHY at address 1 */
 	if (!pd->mii_bus->phy_map[1]) {
-		pr_err("%s: no PHY found at address 1\n", dev->name);
+		netdev_err(dev, "no PHY found at address 1\n");
 		return -ENODEV;
 	}
 
@@ -1180,12 +1180,12 @@ static int smsc9420_mii_probe(struct net_device *dev)
 			     smsc9420_phy_adjust_link, PHY_INTERFACE_MODE_MII);
 
 	if (IS_ERR(phydev)) {
-		pr_err("%s: Could not attach to PHY\n", dev->name);
+		netdev_err(dev, "Could not attach to PHY\n");
 		return PTR_ERR(phydev);
 	}
 
-	pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
-		dev->name, phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+	netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+		    phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	/* mask with MAC supported features */
 	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
@@ -1582,12 +1582,12 @@ smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	int result = 0;
 	u32 id_rev;
 
-	printk(KERN_INFO DRV_DESCRIPTION " version " DRV_VERSION "\n");
+	pr_info(DRV_DESCRIPTION " version " DRV_VERSION "\n");
 
 	/* First do the PCI initialisation */
 	result = pci_enable_device(pdev);
 	if (unlikely(result)) {
-		printk(KERN_ERR "Cannot enable smsc9420\n");
+		pr_err("Cannot enable smsc9420\n");
 		goto out_0;
 	}
 
@@ -1600,24 +1600,24 @@ smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (!(pci_resource_flags(pdev, SMSC_BAR) & IORESOURCE_MEM)) {
-		printk(KERN_ERR "Cannot find PCI device base address\n");
+		netdev_err(dev, "Cannot find PCI device base address\n");
 		goto out_free_netdev_2;
 	}
 
 	if ((pci_request_regions(pdev, DRV_NAME))) {
-		printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
+		netdev_err(dev, "Cannot obtain PCI resources, aborting.\n");
 		goto out_free_netdev_2;
 	}
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		printk(KERN_ERR "No usable DMA configuration, aborting.\n");
+		netdev_err(dev, "No usable DMA configuration, aborting.\n");
 		goto out_free_regions_3;
 	}
 
 	virt_addr = ioremap(pci_resource_start(pdev, SMSC_BAR),
 		pci_resource_len(pdev, SMSC_BAR));
 	if (!virt_addr) {
-		printk(KERN_ERR "Cannot map device registers, aborting.\n");
+		netdev_err(dev, "Cannot map device registers, aborting.\n");
 		goto out_free_regions_3;
 	}
 
-- 
1.8.4.2

Re: [PATCHv2 net-next 0/7] smsc: replace printk with netdev_ calls

[David Miller]

From: Ben Boeckel <mathstuf@gmail.com>
Date: Fri,  1 Nov 2013 08:53:29 -0400

> Clean up printk calls in smsc network drivers by using netdev_<level>
> instead. Also fixes some whitespace errors (trailing whitespace,
> spaces-between-tabs) noticed while fixing the printk calls. Reindenting files
> was not done.
> 
> I've compile tested them all on x86 by forcing them to at least compile to
> catch obvious errors.

Applied, thanks Ben.