* [PATCH bpf-next V9 0/3] BPF: New helper to obtain namespace data from current task
@ 2019-08-13 18:47 Carlos Neira
2019-08-13 18:47 ` [PATCH bpf-next V9 1/3] bpf: new " Carlos Neira
` (2 more replies)
0 siblings, 3 replies; 17+ messages in thread
From: Carlos Neira @ 2019-08-13 18:47 UTC (permalink / raw)
To: netdev; +Cc: yhs, ebiederm, brouer, cneirabustos, bpf
This helper obtains the active namespace from current and returns pid, tgid,
device and namespace id as seen from that namespace, allowing to instrument
a process inside a container.
Device is read from /proc/self/ns/pid, as in the future it's possible that
different pid_ns files may belong to different devices, according
to the discussion between Eric Biederman and Yonghong in 2017 linux plumbers
conference.
Currently bpf_get_current_pid_tgid(), is used to do pid filtering in bcc's
scripts but this helper returns the pid as seen by the root namespace which is
fine when a bcc script is not executed inside a container.
When the process of interest is inside a container, pid filtering will not work
if bpf_get_current_pid_tgid() is used. This helper addresses this limitation
returning the pid as it's seen by the current namespace where the script is
executing.
This helper has the same use cases as bpf_get_current_pid_tgid() as it can be
used to do pid filtering even inside a container.
For example a bcc script using bpf_get_current_pid_tgid() (tools/funccount.py):
u32 pid = bpf_get_current_pid_tgid() >> 32;
if (pid != <pid_arg_passed_in>)
return 0;
Could be modified to use bpf_get_current_pidns_info() as follows:
struct bpf_pidns pidns;
bpf_get_current_pidns_info(&pidns, sizeof(struct bpf_pidns));
u32 pid = pidns.tgid;
u32 nsid = pidns.nsid;
if ((pid != <pid_arg_passed_in>) && (nsid != <nsid_arg_passed_in>))
return 0;
To find out the name PID namespace id of a process, you could use this command:
$ ps -h -o pidns -p <pid_of_interest>
Or this other command:
$ ls -Li /proc/<pid_of_interest>/ns/pid
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Carlos Neira (3):
bpf: new helper to obtain namespace data from current task
samples/bpf: added sample code for bpf_get_current_pidns_info.
tools/testing/selftests/bpf: Add self-tests for new helper.
fs/internal.h | 2 -
fs/namei.c | 1 -
include/linux/bpf.h | 1 +
include/linux/namei.h | 4 +
include/uapi/linux/bpf.h | 31 ++++-
kernel/bpf/core.c | 1 +
kernel/bpf/helpers.c | 64 ++++++++++
kernel/trace/bpf_trace.c | 2 +
samples/bpf/Makefile | 3 +
samples/bpf/trace_ns_info_user.c | 35 ++++++
samples/bpf/trace_ns_info_user_kern.c | 44 +++++++
tools/include/uapi/linux/bpf.h | 31 ++++-
tools/testing/selftests/bpf/Makefile | 2 +-
tools/testing/selftests/bpf/bpf_helpers.h | 3 +
.../testing/selftests/bpf/progs/test_pidns_kern.c | 51 ++++++++
tools/testing/selftests/bpf/test_pidns.c | 138 +++++++++++++++++++++
16 files changed, 407 insertions(+), 6 deletions(-)
create mode 100644 samples/bpf/trace_ns_info_user.c
create mode 100644 samples/bpf/trace_ns_info_user_kern.c
create mode 100644 tools/testing/selftests/bpf/progs/test_pidns_kern.c
create mode 100644 tools/testing/selftests/bpf/test_pidns.c
--
2.11.0
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-13 18:47 [PATCH bpf-next V9 0/3] BPF: New helper to obtain namespace data from current task Carlos Neira
@ 2019-08-13 18:47 ` Carlos Neira
2019-08-13 22:35 ` Yonghong Song
2019-08-13 23:11 ` Yonghong Song
2019-08-13 18:47 ` [PATCH bpf-next V9 2/3] samples/bpf: added sample code for bpf_get_current_pidns_info Carlos Neira
2019-08-13 18:47 ` [PATCH bpf-next V9 3/3] tools/testing/selftests/bpf: Add self-tests for new helper Carlos Neira
2 siblings, 2 replies; 17+ messages in thread
From: Carlos Neira @ 2019-08-13 18:47 UTC (permalink / raw)
To: netdev; +Cc: yhs, ebiederm, brouer, cneirabustos, bpf
From: Carlos <cneirabustos@gmail.com>
New bpf helper bpf_get_current_pidns_info.
This helper obtains the active namespace from current and returns
pid, tgid, device and namespace id as seen from that namespace,
allowing to instrument a process inside a container.
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
---
fs/internal.h | 2 --
fs/namei.c | 1 -
include/linux/bpf.h | 1 +
include/linux/namei.h | 4 +++
include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
kernel/bpf/core.c | 1 +
kernel/bpf/helpers.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
kernel/trace/bpf_trace.c | 2 ++
8 files changed, 102 insertions(+), 4 deletions(-)
diff --git a/fs/internal.h b/fs/internal.h
index 315fcd8d237c..6647e15dd419 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -59,8 +59,6 @@ extern int finish_clean_context(struct fs_context *fc);
/*
* namei.c
*/
-extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
- struct path *path, struct path *root);
extern int user_path_mountpoint_at(int, const char __user *, unsigned int, struct path *);
extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
const char *, unsigned int, struct path *);
diff --git a/fs/namei.c b/fs/namei.c
index 209c51a5226c..a89fc72a4a10 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -19,7 +19,6 @@
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/fs.h>
#include <linux/namei.h>
#include <linux/pagemap.h>
#include <linux/fsnotify.h>
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index f9a506147c8a..e4adf5e05afd 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1050,6 +1050,7 @@ extern const struct bpf_func_proto bpf_get_local_storage_proto;
extern const struct bpf_func_proto bpf_strtol_proto;
extern const struct bpf_func_proto bpf_strtoul_proto;
extern const struct bpf_func_proto bpf_tcp_sock_proto;
+extern const struct bpf_func_proto bpf_get_current_pidns_info_proto;
/* Shared helpers among cBPF and eBPF. */
void bpf_user_rnd_init_once(void);
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 9138b4471dbf..b45c8b6f7cb4 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -6,6 +6,7 @@
#include <linux/path.h>
#include <linux/fcntl.h>
#include <linux/errno.h>
+#include <linux/fs.h>
enum { MAX_NESTED_LINKS = 8 };
@@ -97,6 +98,9 @@ extern void unlock_rename(struct dentry *, struct dentry *);
extern void nd_jump_link(struct path *path);
+extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
+ struct path *path, struct path *root);
+
static inline void nd_terminate_link(void *name, size_t len, size_t maxlen)
{
((char *) name)[min(len, maxlen)] = '\0';
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 4393bd4b2419..db241857ec15 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -2741,6 +2741,28 @@ union bpf_attr {
* **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
*
* **-EPROTONOSUPPORT** IP packet version is not 4 or 6
+ *
+ * int bpf_get_current_pidns_info(struct bpf_pidns_info *pidns, u32 size_of_pidns)
+ * Description
+ * Copies into *pidns* pid, namespace id and tgid as seen by the
+ * current namespace and also device from /proc/self/ns/pid.
+ * *size_of_pidns* must be the size of *pidns*
+ *
+ * This helper is used when pid filtering is needed inside a
+ * container as bpf_get_current_tgid() helper returns always the
+ * pid id as seen by the root namespace.
+ * Return
+ * 0 on success
+ *
+ * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
+ * or tgid of the current task.
+ *
+ * **-ECHILD** if /proc/self/ns/pid does not exists.
+ *
+ * **-ENOTDIR** if /proc/self/ns does not exists.
+ *
+ * **-ENOMEM** if allocation fails.
+ *
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
@@ -2853,7 +2875,8 @@ union bpf_attr {
FN(sk_storage_get), \
FN(sk_storage_delete), \
FN(send_signal), \
- FN(tcp_gen_syncookie),
+ FN(tcp_gen_syncookie), \
+ FN(get_current_pidns_info),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
@@ -3604,4 +3627,10 @@ struct bpf_sockopt {
__s32 retval;
};
+struct bpf_pidns_info {
+ __u32 dev;
+ __u32 nsid;
+ __u32 tgid;
+ __u32 pid;
+};
#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 8191a7db2777..3159f2a0188c 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -2038,6 +2038,7 @@ const struct bpf_func_proto bpf_get_current_uid_gid_proto __weak;
const struct bpf_func_proto bpf_get_current_comm_proto __weak;
const struct bpf_func_proto bpf_get_current_cgroup_id_proto __weak;
const struct bpf_func_proto bpf_get_local_storage_proto __weak;
+const struct bpf_func_proto bpf_get_current_pidns_info __weak;
const struct bpf_func_proto * __weak bpf_get_trace_printk_proto(void)
{
diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index 5e28718928ca..41fbf1f28a48 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -11,6 +11,12 @@
#include <linux/uidgid.h>
#include <linux/filter.h>
#include <linux/ctype.h>
+#include <linux/pid_namespace.h>
+#include <linux/major.h>
+#include <linux/stat.h>
+#include <linux/namei.h>
+#include <linux/version.h>
+
#include "../../lib/kstrtox.h"
@@ -312,6 +318,64 @@ void copy_map_value_locked(struct bpf_map *map, void *dst, void *src,
preempt_enable();
}
+BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *, pidns_info, u32,
+ size)
+{
+ const char *pidns_path = "/proc/self/ns/pid";
+ struct pid_namespace *pidns = NULL;
+ struct filename *tmp = NULL;
+ struct inode *inode;
+ struct path kp;
+ pid_t tgid = 0;
+ pid_t pid = 0;
+ int ret;
+ int len;
+
+ if (unlikely(size != sizeof(struct bpf_pidns_info)))
+ return -EINVAL;
+ pidns = task_active_pid_ns(current);
+ if (unlikely(!pidns))
+ goto clear;
+ pidns_info->nsid = pidns->ns.inum;
+ pid = task_pid_nr_ns(current, pidns);
+ if (unlikely(!pid))
+ goto clear;
+ tgid = task_tgid_nr_ns(current, pidns);
+ if (unlikely(!tgid))
+ goto clear;
+ pidns_info->tgid = (u32) tgid;
+ pidns_info->pid = (u32) pid;
+ tmp = kmem_cache_alloc(names_cachep, GFP_ATOMIC);
+ if (unlikely(!tmp)) {
+ memset((void *)pidns_info, 0, (size_t) size);
+ return -ENOMEM;
+ }
+ len = strlen(pidns_path) + 1;
+ memcpy((char *)tmp->name, pidns_path, len);
+ tmp->uptr = NULL;
+ tmp->aname = NULL;
+ tmp->refcnt = 1;
+ ret = filename_lookup(AT_FDCWD, tmp, 0, &kp, NULL);
+ if (ret) {
+ memset((void *)pidns_info, 0, (size_t) size);
+ return ret;
+ }
+ inode = d_backing_inode(kp.dentry);
+ pidns_info->dev = inode->i_sb->s_dev;
+ return 0;
+clear:
+ memset((void *)pidns_info, 0, (size_t) size);
+ return -EINVAL;
+}
+
+const struct bpf_func_proto bpf_get_current_pidns_info_proto = {
+ .func = bpf_get_current_pidns_info,
+ .gpl_only = false,
+ .ret_type = RET_INTEGER,
+ .arg1_type = ARG_PTR_TO_UNINIT_MEM,
+ .arg2_type = ARG_CONST_SIZE,
+};
+
#ifdef CONFIG_CGROUPS
BPF_CALL_0(bpf_get_current_cgroup_id)
{
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index ca1255d14576..5e1dc22765a5 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -709,6 +709,8 @@ tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
#endif
case BPF_FUNC_send_signal:
return &bpf_send_signal_proto;
+ case BPF_FUNC_get_current_pidns_info:
+ return &bpf_get_current_pidns_info_proto;
default:
return NULL;
}
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH bpf-next V9 2/3] samples/bpf: added sample code for bpf_get_current_pidns_info.
2019-08-13 18:47 [PATCH bpf-next V9 0/3] BPF: New helper to obtain namespace data from current task Carlos Neira
2019-08-13 18:47 ` [PATCH bpf-next V9 1/3] bpf: new " Carlos Neira
@ 2019-08-13 18:47 ` Carlos Neira
2019-08-13 18:47 ` [PATCH bpf-next V9 3/3] tools/testing/selftests/bpf: Add self-tests for new helper Carlos Neira
2 siblings, 0 replies; 17+ messages in thread
From: Carlos Neira @ 2019-08-13 18:47 UTC (permalink / raw)
To: netdev; +Cc: yhs, ebiederm, brouer, cneirabustos, bpf
From: Carlos <cneirabustos@gmail.com>
sample program to call new bpf helper bpf_get_current_pidns_info.
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
---
samples/bpf/Makefile | 3 +++
samples/bpf/trace_ns_info_user.c | 35 ++++++++++++++++++++++++++++
samples/bpf/trace_ns_info_user_kern.c | 44 +++++++++++++++++++++++++++++++++++
3 files changed, 82 insertions(+)
create mode 100644 samples/bpf/trace_ns_info_user.c
create mode 100644 samples/bpf/trace_ns_info_user_kern.c
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 1d9be26b4edd..238453ff27d2 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -53,6 +53,7 @@ hostprogs-y += task_fd_query
hostprogs-y += xdp_sample_pkts
hostprogs-y += ibumad
hostprogs-y += hbm
+hostprogs-y += trace_ns_info
# Libbpf dependencies
LIBBPF = $(TOOLS_PATH)/lib/bpf/libbpf.a
@@ -109,6 +110,7 @@ task_fd_query-objs := bpf_load.o task_fd_query_user.o $(TRACE_HELPERS)
xdp_sample_pkts-objs := xdp_sample_pkts_user.o $(TRACE_HELPERS)
ibumad-objs := bpf_load.o ibumad_user.o $(TRACE_HELPERS)
hbm-objs := bpf_load.o hbm.o $(CGROUP_HELPERS)
+trace_ns_info-objs := bpf_load.o trace_ns_info_user.o
# Tell kbuild to always build the programs
always := $(hostprogs-y)
@@ -170,6 +172,7 @@ always += xdp_sample_pkts_kern.o
always += ibumad_kern.o
always += hbm_out_kern.o
always += hbm_edt_kern.o
+always += trace_ns_info_user_kern.o
KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include
KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/bpf/
diff --git a/samples/bpf/trace_ns_info_user.c b/samples/bpf/trace_ns_info_user.c
new file mode 100644
index 000000000000..e06d08db6f30
--- /dev/null
+++ b/samples/bpf/trace_ns_info_user.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018 Carlos Neira cneirabustos@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#include <stdio.h>
+#include <linux/bpf.h>
+#include <unistd.h>
+#include "bpf/libbpf.h"
+#include "bpf_load.h"
+
+/* This code was taken verbatim from tracex1_user.c, it's used
+ * to exercize bpf_get_current_pidns_info() helper call.
+ */
+int main(int ac, char **argv)
+{
+ FILE *f;
+ char filename[256];
+
+ snprintf(filename, sizeof(filename), "%s_user_kern.o", argv[0]);
+ printf("loading %s\n", filename);
+
+ if (load_bpf_file(filename)) {
+ printf("%s", bpf_log_buf);
+ return 1;
+ }
+
+ f = popen("taskset 1 ping localhost", "r");
+ (void) f;
+ read_trace_pipe();
+ return 0;
+}
diff --git a/samples/bpf/trace_ns_info_user_kern.c b/samples/bpf/trace_ns_info_user_kern.c
new file mode 100644
index 000000000000..96675e02b707
--- /dev/null
+++ b/samples/bpf/trace_ns_info_user_kern.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018 Carlos Neira cneirabustos@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/version.h>
+#include <uapi/linux/bpf.h>
+#include "bpf_helpers.h"
+
+typedef __u64 u64;
+typedef __u32 u32;
+
+
+/* kprobe is NOT a stable ABI
+ * kernel functions can be removed, renamed or completely change semantics.
+ * Number of arguments and their positions can change, etc.
+ * In such case this bpf+kprobe example will no longer be meaningful
+ */
+
+/* This will call bpf_get_current_pidns_info() to display pid and ns values
+ * as seen by the current namespace, on the far left you will see the pid as
+ * seen as by the root namespace.
+ */
+
+SEC("kprobe/__netif_receive_skb_core")
+int bpf_prog1(struct pt_regs *ctx)
+{
+ char fmt[] = "nsid:%u, dev: %u, pid:%u\n";
+ struct bpf_pidns_info nsinfo;
+ int ok = 0;
+
+ ok = bpf_get_current_pidns_info(&nsinfo, sizeof(nsinfo));
+ if (ok == 0)
+ bpf_trace_printk(fmt, sizeof(fmt), (u32)nsinfo.nsid,
+ (u32) nsinfo.dev, (u32)nsinfo.pid);
+
+ return 0;
+}
+char _license[] SEC("license") = "GPL";
+u32 _version SEC("version") = LINUX_VERSION_CODE;
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH bpf-next V9 3/3] tools/testing/selftests/bpf: Add self-tests for new helper.
2019-08-13 18:47 [PATCH bpf-next V9 0/3] BPF: New helper to obtain namespace data from current task Carlos Neira
2019-08-13 18:47 ` [PATCH bpf-next V9 1/3] bpf: new " Carlos Neira
2019-08-13 18:47 ` [PATCH bpf-next V9 2/3] samples/bpf: added sample code for bpf_get_current_pidns_info Carlos Neira
@ 2019-08-13 18:47 ` Carlos Neira
2019-08-13 23:19 ` Yonghong Song
2 siblings, 1 reply; 17+ messages in thread
From: Carlos Neira @ 2019-08-13 18:47 UTC (permalink / raw)
To: netdev; +Cc: yhs, ebiederm, brouer, cneirabustos, bpf
From: Carlos <cneirabustos@gmail.com>
Added self-tests for new helper bpf_get_current_pidns_info.
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
---
tools/include/uapi/linux/bpf.h | 31 ++++-
tools/testing/selftests/bpf/Makefile | 2 +-
tools/testing/selftests/bpf/bpf_helpers.h | 3 +
.../testing/selftests/bpf/progs/test_pidns_kern.c | 51 ++++++++
tools/testing/selftests/bpf/test_pidns.c | 138 +++++++++++++++++++++
5 files changed, 223 insertions(+), 2 deletions(-)
create mode 100644 tools/testing/selftests/bpf/progs/test_pidns_kern.c
create mode 100644 tools/testing/selftests/bpf/test_pidns.c
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 4393bd4b2419..db241857ec15 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -2741,6 +2741,28 @@ union bpf_attr {
* **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
*
* **-EPROTONOSUPPORT** IP packet version is not 4 or 6
+ *
+ * int bpf_get_current_pidns_info(struct bpf_pidns_info *pidns, u32 size_of_pidns)
+ * Description
+ * Copies into *pidns* pid, namespace id and tgid as seen by the
+ * current namespace and also device from /proc/self/ns/pid.
+ * *size_of_pidns* must be the size of *pidns*
+ *
+ * This helper is used when pid filtering is needed inside a
+ * container as bpf_get_current_tgid() helper returns always the
+ * pid id as seen by the root namespace.
+ * Return
+ * 0 on success
+ *
+ * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
+ * or tgid of the current task.
+ *
+ * **-ECHILD** if /proc/self/ns/pid does not exists.
+ *
+ * **-ENOTDIR** if /proc/self/ns does not exists.
+ *
+ * **-ENOMEM** if allocation fails.
+ *
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
@@ -2853,7 +2875,8 @@ union bpf_attr {
FN(sk_storage_get), \
FN(sk_storage_delete), \
FN(send_signal), \
- FN(tcp_gen_syncookie),
+ FN(tcp_gen_syncookie), \
+ FN(get_current_pidns_info),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
@@ -3604,4 +3627,10 @@ struct bpf_sockopt {
__s32 retval;
};
+struct bpf_pidns_info {
+ __u32 dev;
+ __u32 nsid;
+ __u32 tgid;
+ __u32 pid;
+};
#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 3bd0f4a0336a..1f97b571b581 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -29,7 +29,7 @@ TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test
test_cgroup_storage test_select_reuseport test_section_names \
test_netcnt test_tcpnotify_user test_sock_fields test_sysctl test_hashmap \
test_btf_dump test_cgroup_attach xdping test_sockopt test_sockopt_sk \
- test_sockopt_multi test_tcp_rtt
+ test_sockopt_multi test_tcp_rtt test_pidns
BPF_OBJ_FILES = $(patsubst %.c,%.o, $(notdir $(wildcard progs/*.c)))
TEST_GEN_FILES = $(BPF_OBJ_FILES)
diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
index 8b503ea142f0..3fae3b9fcd2c 100644
--- a/tools/testing/selftests/bpf/bpf_helpers.h
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -231,6 +231,9 @@ static int (*bpf_send_signal)(unsigned sig) = (void *)BPF_FUNC_send_signal;
static long long (*bpf_tcp_gen_syncookie)(struct bpf_sock *sk, void *ip,
int ip_len, void *tcp, int tcp_len) =
(void *) BPF_FUNC_tcp_gen_syncookie;
+static int (*bpf_get_current_pidns_info)(struct bpf_pidns_info *buf,
+ unsigned int buf_size) =
+ (void *) BPF_FUNC_get_current_pidns_info;
/* llvm builtin functions that eBPF C program may use to
* emit BPF_LD_ABS and BPF_LD_IND instructions
diff --git a/tools/testing/selftests/bpf/progs/test_pidns_kern.c b/tools/testing/selftests/bpf/progs/test_pidns_kern.c
new file mode 100644
index 000000000000..e1d2facfa762
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_pidns_kern.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018 Carlos Neira cneirabustos@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#include <linux/bpf.h>
+#include <errno.h>
+#include "bpf_helpers.h"
+
+struct bpf_map_def SEC("maps") nsidmap = {
+ .type = BPF_MAP_TYPE_ARRAY,
+ .key_size = sizeof(__u32),
+ .value_size = sizeof(__u32),
+ .max_entries = 1,
+};
+
+struct bpf_map_def SEC("maps") pidmap = {
+ .type = BPF_MAP_TYPE_ARRAY,
+ .key_size = sizeof(__u32),
+ .value_size = sizeof(__u32),
+ .max_entries = 1,
+};
+
+SEC("tracepoint/syscalls/sys_enter_nanosleep")
+int trace(void *ctx)
+{
+ struct bpf_pidns_info nsinfo;
+ __u32 key = 0, *expected_pid, *val;
+ char fmt[] = "ERROR nspid:%d\n";
+
+ if (bpf_get_current_pidns_info(&nsinfo, sizeof(nsinfo)))
+ return -EINVAL;
+
+ expected_pid = bpf_map_lookup_elem(&pidmap, &key);
+
+
+ if (!expected_pid || *expected_pid != nsinfo.pid)
+ return 0;
+
+ val = bpf_map_lookup_elem(&nsidmap, &key);
+ if (val)
+ *val = nsinfo.nsid;
+
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
+__u32 _version SEC("version") = 1;
diff --git a/tools/testing/selftests/bpf/test_pidns.c b/tools/testing/selftests/bpf/test_pidns.c
new file mode 100644
index 000000000000..a7254055f294
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_pidns.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018 Carlos Neira cneirabustos@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <syscall.h>
+#include <unistd.h>
+#include <linux/perf_event.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <linux/bpf.h>
+#include <bpf/bpf.h>
+#include <bpf/libbpf.h>
+
+#include "cgroup_helpers.h"
+#include "bpf_rlimit.h"
+
+#define CHECK(condition, tag, format...) ({ \
+ int __ret = !!(condition); \
+ if (__ret) { \
+ printf("%s:FAIL:%s ", __func__, tag); \
+ printf(format); \
+ } else { \
+ printf("%s:PASS:%s\n", __func__, tag); \
+ } \
+ __ret; \
+})
+
+static int bpf_find_map(const char *test, struct bpf_object *obj,
+ const char *name)
+{
+ struct bpf_map *map;
+
+ map = bpf_object__find_map_by_name(obj, name);
+ if (!map)
+ return -1;
+ return bpf_map__fd(map);
+}
+
+
+int main(int argc, char **argv)
+{
+ const char *probe_name = "syscalls/sys_enter_nanosleep";
+ const char *file = "test_pidns_kern.o";
+ int err, bytes, efd, prog_fd, pmu_fd;
+ int pidmap_fd, nsidmap_fd;
+ struct perf_event_attr attr = {};
+ struct bpf_object *obj;
+ __u32 knsid = 0;
+ __u32 key = 0, pid;
+ int exit_code = 1;
+ struct stat st;
+ char buf[256];
+
+ err = bpf_prog_load(file, BPF_PROG_TYPE_TRACEPOINT, &obj, &prog_fd);
+ if (CHECK(err, "bpf_prog_load", "err %d errno %d\n", err, errno))
+ goto cleanup_cgroup_env;
+
+ nsidmap_fd = bpf_find_map(__func__, obj, "nsidmap");
+ if (CHECK(nsidmap_fd < 0, "bpf_find_map", "err %d errno %d\n",
+ nsidmap_fd, errno))
+ goto close_prog;
+
+ pidmap_fd = bpf_find_map(__func__, obj, "pidmap");
+ if (CHECK(pidmap_fd < 0, "bpf_find_map", "err %d errno %d\n",
+ pidmap_fd, errno))
+ goto close_prog;
+
+ pid = getpid();
+ bpf_map_update_elem(pidmap_fd, &key, &pid, 0);
+
+ snprintf(buf, sizeof(buf),
+ "/sys/kernel/debug/tracing/events/%s/id", probe_name);
+ efd = open(buf, O_RDONLY, 0);
+ if (CHECK(efd < 0, "open", "err %d errno %d\n", efd, errno))
+ goto close_prog;
+ bytes = read(efd, buf, sizeof(buf));
+ close(efd);
+ if (CHECK(bytes <= 0 || bytes >= sizeof(buf), "read",
+ "bytes %d errno %d\n", bytes, errno))
+ goto close_prog;
+
+ attr.config = strtol(buf, NULL, 0);
+ attr.type = PERF_TYPE_TRACEPOINT;
+ attr.sample_type = PERF_SAMPLE_RAW;
+ attr.sample_period = 1;
+ attr.wakeup_events = 1;
+
+ pmu_fd = syscall(__NR_perf_event_open, &attr, getpid(), -1, -1, 0);
+ if (CHECK(pmu_fd < 0, "perf_event_open", "err %d errno %d\n", pmu_fd,
+ errno))
+ goto close_prog;
+
+ err = ioctl(pmu_fd, PERF_EVENT_IOC_ENABLE, 0);
+ if (CHECK(err, "perf_event_ioc_enable", "err %d errno %d\n", err,
+ errno))
+ goto close_pmu;
+
+ err = ioctl(pmu_fd, PERF_EVENT_IOC_SET_BPF, prog_fd);
+ if (CHECK(err, "perf_event_ioc_set_bpf", "err %d errno %d\n", err,
+ errno))
+ goto close_pmu;
+
+ /* trigger some syscalls */
+ sleep(1);
+
+ err = bpf_map_lookup_elem(nsidmap_fd, &key, &knsid);
+ if (CHECK(err, "bpf_map_lookup_elem", "err %d errno %d\n", err, errno))
+ goto close_pmu;
+
+ if (stat("/proc/self/ns/pid", &st))
+ goto close_pmu;
+
+ if (CHECK(knsid != (__u32) st.st_ino, "compare_namespace_id",
+ "kern knsid %u user unsid %u\n", knsid, (__u32) st.st_ino))
+ goto close_pmu;
+
+ exit_code = 0;
+ printf("%s:PASS\n", argv[0]);
+
+close_pmu:
+ close(pmu_fd);
+close_prog:
+ bpf_object__close(obj);
+cleanup_cgroup_env:
+ return exit_code;
+}
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-13 18:47 ` [PATCH bpf-next V9 1/3] bpf: new " Carlos Neira
@ 2019-08-13 22:35 ` Yonghong Song
2019-08-20 15:10 ` Carlos Antonio Neira Bustos
2019-08-13 23:11 ` Yonghong Song
1 sibling, 1 reply; 17+ messages in thread
From: Yonghong Song @ 2019-08-13 22:35 UTC (permalink / raw)
To: Carlos Neira, netdev; +Cc: ebiederm, brouer, bpf
On 8/13/19 11:47 AM, Carlos Neira wrote:
> From: Carlos <cneirabustos@gmail.com>
>
> New bpf helper bpf_get_current_pidns_info.
> This helper obtains the active namespace from current and returns
> pid, tgid, device and namespace id as seen from that namespace,
> allowing to instrument a process inside a container.
>
> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
> ---
> fs/internal.h | 2 --
> fs/namei.c | 1 -
> include/linux/bpf.h | 1 +
> include/linux/namei.h | 4 +++
> include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
> kernel/bpf/core.c | 1 +
> kernel/bpf/helpers.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
> kernel/trace/bpf_trace.c | 2 ++
> 8 files changed, 102 insertions(+), 4 deletions(-)
I prefer to break this into two patches to reduce
the potential merging conflicts:
patch 1: fs/internal.h, fs/namei.c, include/linux/namei.h
patch 2: rest of changes
patch 1 is simply a preparing patches to make filename_lookup
available later.
>
> diff --git a/fs/internal.h b/fs/internal.h
> index 315fcd8d237c..6647e15dd419 100644
> --- a/fs/internal.h
> +++ b/fs/internal.h
> @@ -59,8 +59,6 @@ extern int finish_clean_context(struct fs_context *fc);
> /*
> * namei.c
> */
> -extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
> - struct path *path, struct path *root);
> extern int user_path_mountpoint_at(int, const char __user *, unsigned int, struct path *);
> extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
> const char *, unsigned int, struct path *);
> diff --git a/fs/namei.c b/fs/namei.c
> index 209c51a5226c..a89fc72a4a10 100644
> --- a/fs/namei.c
> +++ b/fs/namei.c
> @@ -19,7 +19,6 @@
> #include <linux/export.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> -#include <linux/fs.h>
> #include <linux/namei.h>
> #include <linux/pagemap.h>
> #include <linux/fsnotify.h>
> diff --git a/include/linux/bpf.h b/include/linux/bpf.h
> index f9a506147c8a..e4adf5e05afd 100644
> --- a/include/linux/bpf.h
> +++ b/include/linux/bpf.h
> @@ -1050,6 +1050,7 @@ extern const struct bpf_func_proto bpf_get_local_storage_proto;
> extern const struct bpf_func_proto bpf_strtol_proto;
> extern const struct bpf_func_proto bpf_strtoul_proto;
> extern const struct bpf_func_proto bpf_tcp_sock_proto;
> +extern const struct bpf_func_proto bpf_get_current_pidns_info_proto;
>
> /* Shared helpers among cBPF and eBPF. */
> void bpf_user_rnd_init_once(void);
> diff --git a/include/linux/namei.h b/include/linux/namei.h
> index 9138b4471dbf..b45c8b6f7cb4 100644
> --- a/include/linux/namei.h
> +++ b/include/linux/namei.h
> @@ -6,6 +6,7 @@
> #include <linux/path.h>
> #include <linux/fcntl.h>
> #include <linux/errno.h>
> +#include <linux/fs.h>
>
> enum { MAX_NESTED_LINKS = 8 };
>
> @@ -97,6 +98,9 @@ extern void unlock_rename(struct dentry *, struct dentry *);
>
> extern void nd_jump_link(struct path *path);
>
> +extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
> + struct path *path, struct path *root);
> +
> static inline void nd_terminate_link(void *name, size_t len, size_t maxlen)
> {
> ((char *) name)[min(len, maxlen)] = '\0';
> diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
> index 4393bd4b2419..db241857ec15 100644
> --- a/include/uapi/linux/bpf.h
> +++ b/include/uapi/linux/bpf.h
> @@ -2741,6 +2741,28 @@ union bpf_attr {
> * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
> *
> * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
> + *
> + * int bpf_get_current_pidns_info(struct bpf_pidns_info *pidns, u32 size_of_pidns)
size_of_pidns => size.
> + * Description
> + * Copies into *pidns* pid, namespace id and tgid as seen by the
Copies => Copy.
Maybe something like below:
Get tgid, pid and namespace id as seen by the current namespace, and
device major/minor numbers from device /proc/self/ns/pid. Such
information is stored in *pidns* of size *size*.
> + * current namespace and also device from /proc/self/ns/pid.
> + * *size_of_pidns* must be the size of *pidns*
> + *
> + * This helper is used when pid filtering is needed inside a
> + * container as bpf_get_current_tgid() helper returns always the
returns always => always returns.
> + * pid id as seen by the root namespace.
> + * Return
> + * 0 on success
> + *
> + * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
> + * or tgid of the current task.
> + *
> + * **-ECHILD** if /proc/self/ns/pid does not exists.
> + *
> + * **-ENOTDIR** if /proc/self/ns does not exists.
Let us remove ECHILD and ENOTDIR and replace it with ENOENT as I
described below.
Please *do verify* what happens when namespaces or pid_ns are not
configured.
> + *
> + * **-ENOMEM** if allocation fails.
helper internal allocation fails.
> + *
> */
> #define __BPF_FUNC_MAPPER(FN) \
> FN(unspec), \
> @@ -2853,7 +2875,8 @@ union bpf_attr {
> FN(sk_storage_get), \
> FN(sk_storage_delete), \
> FN(send_signal), \
> - FN(tcp_gen_syncookie),
> + FN(tcp_gen_syncookie), \
> + FN(get_current_pidns_info),
>
> /* integer value in 'imm' field of BPF_CALL instruction selects which helper
> * function eBPF program intends to call
> @@ -3604,4 +3627,10 @@ struct bpf_sockopt {
> __s32 retval;
> };
>
> +struct bpf_pidns_info {
> + __u32 dev;
Please add a comment for dev for how device major and minor number are
derived. User space gets device major and minor number, they need to
compare to the corresponding major/minor numbers returned by this helper.
> + __u32 nsid;
> + __u32 tgid;
> + __u32 pid;
> +};
> #endif /* _UAPI__LINUX_BPF_H__ */
> diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
> index 8191a7db2777..3159f2a0188c 100644
> --- a/kernel/bpf/core.c
> +++ b/kernel/bpf/core.c
> @@ -2038,6 +2038,7 @@ const struct bpf_func_proto bpf_get_current_uid_gid_proto __weak;
> const struct bpf_func_proto bpf_get_current_comm_proto __weak;
> const struct bpf_func_proto bpf_get_current_cgroup_id_proto __weak;
> const struct bpf_func_proto bpf_get_local_storage_proto __weak;
> +const struct bpf_func_proto bpf_get_current_pidns_info __weak;
>
> const struct bpf_func_proto * __weak bpf_get_trace_printk_proto(void)
> {
> diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
> index 5e28718928ca..41fbf1f28a48 100644
> --- a/kernel/bpf/helpers.c
> +++ b/kernel/bpf/helpers.c
> @@ -11,6 +11,12 @@
> #include <linux/uidgid.h>
> #include <linux/filter.h>
> #include <linux/ctype.h>
> +#include <linux/pid_namespace.h>
> +#include <linux/major.h>
> +#include <linux/stat.h>
> +#include <linux/namei.h>
> +#include <linux/version.h>
> +
>
> #include "../../lib/kstrtox.h"
>
> @@ -312,6 +318,64 @@ void copy_map_value_locked(struct bpf_map *map, void *dst, void *src,
> preempt_enable();
> }
>
> +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *, pidns_info, u32,
> + size)
> +{
> + const char *pidns_path = "/proc/self/ns/pid";
> + struct pid_namespace *pidns = NULL;
> + struct filename *tmp = NULL;
tmp => fname
> + struct inode *inode;
> + struct path kp;
> + pid_t tgid = 0;
> + pid_t pid = 0;
> + int ret;
> + int len;
> +
> + if (unlikely(size != sizeof(struct bpf_pidns_info)))
> + return -EINVAL;
Please put an empty line. As a general rule for readability,
put an empty line if control flow is interrupted, e.g., by
"return", "break" or "continue". At least this is what
I saw most in bpf mailing list.
> + pidns = task_active_pid_ns(current);
> + if (unlikely(!pidns))
> + goto clear;
An empty line. Also, there is nothing to clear.
I prefer an error code -ENOENT.
You can set
ret = -EINVAL;
here
> + pidns_info->nsid = pidns->ns.inum;
> + pid = task_pid_nr_ns(current, pidns);
> + if (unlikely(!pid))
> + goto clear;
An empty line.
> + tgid = task_tgid_nr_ns(current, pidns);
> + if (unlikely(!tgid))
> + goto clear;
An empty line.
> + pidns_info->tgid = (u32) tgid;
> + pidns_info->pid = (u32) pid;
Different functionality, an empty line.
> + tmp = kmem_cache_alloc(names_cachep, GFP_ATOMIC);
> + if (unlikely(!tmp)) {
> + memset((void *)pidns_info, 0, (size_t) size);
> + return -ENOMEM;
ret = -ENOMEM;
goto clear;
> + }
An empty line.
> + len = strlen(pidns_path) + 1;
> + memcpy((char *)tmp->name, pidns_path, len);
> + tmp->uptr = NULL;
> + tmp->aname = NULL;
> + tmp->refcnt = 1;
> + ret = filename_lookup(AT_FDCWD, tmp, 0, &kp, NULL);
Adding below to free kmem cache memory
kmem_cache_free(names_cachep, fname);
In the above, we checked task_active_pid_ns().
If not returning NULL, we have a valid pid ns. So the above
filename_lookup should not go wrong. We can still keep
the error checking though.
> + if (ret) {
> + memset((void *)pidns_info, 0, (size_t) size);
> + return ret;
goto clear;
> + }
An empty line.
> + inode = d_backing_inode(kp.dentry);
> + pidns_info->dev = inode->i_sb->s_dev;
> + return 0;
An empty line.
> +clear > + memset((void *)pidns_info, 0, (size_t) size);
> + return -EINVAL;
> +}
> +
> +const struct bpf_func_proto bpf_get_current_pidns_info_proto = {
> + .func = bpf_get_current_pidns_info,
> + .gpl_only = false,
> + .ret_type = RET_INTEGER,
> + .arg1_type = ARG_PTR_TO_UNINIT_MEM,
> + .arg2_type = ARG_CONST_SIZE,
> +};
> +
> #ifdef CONFIG_CGROUPS
> BPF_CALL_0(bpf_get_current_cgroup_id)
> {
> diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
> index ca1255d14576..5e1dc22765a5 100644
> --- a/kernel/trace/bpf_trace.c
> +++ b/kernel/trace/bpf_trace.c
> @@ -709,6 +709,8 @@ tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
> #endif
> case BPF_FUNC_send_signal:
> return &bpf_send_signal_proto;
> + case BPF_FUNC_get_current_pidns_info:
> + return &bpf_get_current_pidns_info_proto;
> default:
> return NULL;
> }
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-13 18:47 ` [PATCH bpf-next V9 1/3] bpf: new " Carlos Neira
2019-08-13 22:35 ` Yonghong Song
@ 2019-08-13 23:11 ` Yonghong Song
2019-08-13 23:51 ` [Potential Spoof] " Yonghong Song
2019-08-14 0:56 ` Carlos Antonio Neira Bustos
1 sibling, 2 replies; 17+ messages in thread
From: Yonghong Song @ 2019-08-13 23:11 UTC (permalink / raw)
To: Carlos Neira, netdev; +Cc: ebiederm, brouer, bpf
On 8/13/19 11:47 AM, Carlos Neira wrote:
> From: Carlos <cneirabustos@gmail.com>
>
> New bpf helper bpf_get_current_pidns_info.
> This helper obtains the active namespace from current and returns
> pid, tgid, device and namespace id as seen from that namespace,
> allowing to instrument a process inside a container.
>
> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
> ---
> fs/internal.h | 2 --
> fs/namei.c | 1 -
> include/linux/bpf.h | 1 +
> include/linux/namei.h | 4 +++
> include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
> kernel/bpf/core.c | 1 +
> kernel/bpf/helpers.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
> kernel/trace/bpf_trace.c | 2 ++
> 8 files changed, 102 insertions(+), 4 deletions(-)
>
> diff --git a/fs/internal.h b/fs/internal.h
> index 315fcd8d237c..6647e15dd419 100644
> --- a/fs/internal.h
> +++ b/fs/internal.h
> @@ -59,8 +59,6 @@ extern int finish_clean_context(struct fs_context *fc);
> /*
> * namei.c
> */
> -extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
> - struct path *path, struct path *root);
> extern int user_path_mountpoint_at(int, const char __user *, unsigned int, struct path *);
> extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
> const char *, unsigned int, struct path *);
> diff --git a/fs/namei.c b/fs/namei.c
> index 209c51a5226c..a89fc72a4a10 100644
> --- a/fs/namei.c
> +++ b/fs/namei.c
> @@ -19,7 +19,6 @@
> #include <linux/export.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> -#include <linux/fs.h>
> #include <linux/namei.h>
> #include <linux/pagemap.h>
> #include <linux/fsnotify.h>
> diff --git a/include/linux/bpf.h b/include/linux/bpf.h
> index f9a506147c8a..e4adf5e05afd 100644
> --- a/include/linux/bpf.h
> +++ b/include/linux/bpf.h
> @@ -1050,6 +1050,7 @@ extern const struct bpf_func_proto bpf_get_local_storage_proto;
> extern const struct bpf_func_proto bpf_strtol_proto;
> extern const struct bpf_func_proto bpf_strtoul_proto;
> extern const struct bpf_func_proto bpf_tcp_sock_proto;
> +extern const struct bpf_func_proto bpf_get_current_pidns_info_proto;
>
> /* Shared helpers among cBPF and eBPF. */
> void bpf_user_rnd_init_once(void);
> diff --git a/include/linux/namei.h b/include/linux/namei.h
> index 9138b4471dbf..b45c8b6f7cb4 100644
> --- a/include/linux/namei.h
> +++ b/include/linux/namei.h
> @@ -6,6 +6,7 @@
> #include <linux/path.h>
> #include <linux/fcntl.h>
> #include <linux/errno.h>
> +#include <linux/fs.h>
>
> enum { MAX_NESTED_LINKS = 8 };
>
> @@ -97,6 +98,9 @@ extern void unlock_rename(struct dentry *, struct dentry *);
>
> extern void nd_jump_link(struct path *path);
>
> +extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
> + struct path *path, struct path *root);
> +
> static inline void nd_terminate_link(void *name, size_t len, size_t maxlen)
> {
> ((char *) name)[min(len, maxlen)] = '\0';
> diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
> index 4393bd4b2419..db241857ec15 100644
> --- a/include/uapi/linux/bpf.h
> +++ b/include/uapi/linux/bpf.h
> @@ -2741,6 +2741,28 @@ union bpf_attr {
> * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
> *
> * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
> + *
> + * int bpf_get_current_pidns_info(struct bpf_pidns_info *pidns, u32 size_of_pidns)
> + * Description
> + * Copies into *pidns* pid, namespace id and tgid as seen by the
> + * current namespace and also device from /proc/self/ns/pid.
> + * *size_of_pidns* must be the size of *pidns*
> + *
> + * This helper is used when pid filtering is needed inside a
> + * container as bpf_get_current_tgid() helper returns always the
> + * pid id as seen by the root namespace.
> + * Return
> + * 0 on success
> + *
> + * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
> + * or tgid of the current task.
> + *
> + * **-ECHILD** if /proc/self/ns/pid does not exists.
> + *
> + * **-ENOTDIR** if /proc/self/ns does not exists.
> + *
> + * **-ENOMEM** if allocation fails.
> + *
> */
> #define __BPF_FUNC_MAPPER(FN) \
> FN(unspec), \
> @@ -2853,7 +2875,8 @@ union bpf_attr {
> FN(sk_storage_get), \
> FN(sk_storage_delete), \
> FN(send_signal), \
> - FN(tcp_gen_syncookie),
> + FN(tcp_gen_syncookie), \
> + FN(get_current_pidns_info),
>
> /* integer value in 'imm' field of BPF_CALL instruction selects which helper
> * function eBPF program intends to call
> @@ -3604,4 +3627,10 @@ struct bpf_sockopt {
> __s32 retval;
> };
>
> +struct bpf_pidns_info {
> + __u32 dev;
> + __u32 nsid;
> + __u32 tgid;
> + __u32 pid;
> +};
> #endif /* _UAPI__LINUX_BPF_H__ */
> diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
> index 8191a7db2777..3159f2a0188c 100644
> --- a/kernel/bpf/core.c
> +++ b/kernel/bpf/core.c
> @@ -2038,6 +2038,7 @@ const struct bpf_func_proto bpf_get_current_uid_gid_proto __weak;
> const struct bpf_func_proto bpf_get_current_comm_proto __weak;
> const struct bpf_func_proto bpf_get_current_cgroup_id_proto __weak;
> const struct bpf_func_proto bpf_get_local_storage_proto __weak;
> +const struct bpf_func_proto bpf_get_current_pidns_info __weak;
>
> const struct bpf_func_proto * __weak bpf_get_trace_printk_proto(void)
> {
> diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
> index 5e28718928ca..41fbf1f28a48 100644
> --- a/kernel/bpf/helpers.c
> +++ b/kernel/bpf/helpers.c
> @@ -11,6 +11,12 @@
> #include <linux/uidgid.h>
> #include <linux/filter.h>
> #include <linux/ctype.h>
> +#include <linux/pid_namespace.h>
> +#include <linux/major.h>
> +#include <linux/stat.h>
> +#include <linux/namei.h>
> +#include <linux/version.h>
> +
>
> #include "../../lib/kstrtox.h"
>
> @@ -312,6 +318,64 @@ void copy_map_value_locked(struct bpf_map *map, void *dst, void *src,
> preempt_enable();
> }
>
> +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *, pidns_info, u32,
> + size)
> +{
> + const char *pidns_path = "/proc/self/ns/pid";
> + struct pid_namespace *pidns = NULL;
> + struct filename *tmp = NULL;
> + struct inode *inode;
> + struct path kp;
> + pid_t tgid = 0;
> + pid_t pid = 0;
> + int ret;
> + int len;
I am running your sample program and get the following kernel bug:
...
[ 26.414825] BUG: sleeping function called from invalid context at
/data/users/yhs/work/net-next/fs
/dcache.c:843
[ 26.416314] in_atomic(): 1, irqs_disabled(): 0, pid: 1911, name: ping
[ 26.417189] CPU: 0 PID: 1911 Comm: ping Tainted: G W
5.3.0-rc1+ #280
[ 26.418182] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.9.3-1.el7.centos 04/01/2
014
[ 26.419393] Call Trace:
[ 26.419697] <IRQ>
[ 26.419960] dump_stack+0x46/0x5b
[ 26.420434] ___might_sleep+0xe4/0x110
[ 26.420894] dput+0x2a/0x200
[ 26.421265] walk_component+0x10c/0x280
[ 26.421773] link_path_walk+0x327/0x560
[ 26.422280] ? proc_ns_dir_readdir+0x1a0/0x1a0
[ 26.422848] ? path_init+0x232/0x330
[ 26.423364] path_lookupat+0x88/0x200
[ 26.423808] ? selinux_parse_skb.constprop.69+0x124/0x430
[ 26.424521] filename_lookup+0xaf/0x190
[ 26.425031] ? simple_attr_release+0x20/0x20
[ 26.425560] bpf_get_current_pidns_info+0xfa/0x190
[ 26.426168] bpf_prog_83627154cefed596+0xe66/0x1000
[ 26.426779] trace_call_bpf+0xb5/0x160
[ 26.427317] ? __netif_receive_skb_core+0x1/0xbb0
[ 26.427929] ? __netif_receive_skb_core+0x1/0xbb0
[ 26.428496] kprobe_perf_func+0x4d/0x280
[ 26.428986] ? tracing_record_taskinfo_skip+0x1a/0x30
[ 26.429584] ? tracing_record_taskinfo+0xe/0x80
[ 26.430152] ? ttwu_do_wakeup.isra.114+0xcf/0xf0
[ 26.430737] ? __netif_receive_skb_core+0x1/0xbb0
[ 26.431334] ? __netif_receive_skb_core+0x5/0xbb0
[ 26.431930] kprobe_ftrace_handler+0x90/0xf0
[ 26.432495] ftrace_ops_assist_func+0x63/0x100
[ 26.433060] 0xffffffffc03180bf
[ 26.433471] ? __netif_receive_skb_core+0x1/0xbb0
...
To prevent we are running in arbitrary task (e.g., idle task)
context which may introduce sleeping issues, the following
probably appropriate:
if (in_nmi() || in_softirq())
return -EPERM;
Anyway, if in nmi or softirq, the namespace and pid/tgid
we get may be just accidentally associated with the bpf running
context, but it could be in a different context. So such info
is not reliable any way.
> +
> + if (unlikely(size != sizeof(struct bpf_pidns_info)))
> + return -EINVAL;
> + pidns = task_active_pid_ns(current);
> + if (unlikely(!pidns))
> + goto clear;
> + pidns_info->nsid = pidns->ns.inum;
> + pid = task_pid_nr_ns(current, pidns);
> + if (unlikely(!pid))
> + goto clear;
> + tgid = task_tgid_nr_ns(current, pidns);
> + if (unlikely(!tgid))
> + goto clear;
> + pidns_info->tgid = (u32) tgid;
> + pidns_info->pid = (u32) pid;
> + tmp = kmem_cache_alloc(names_cachep, GFP_ATOMIC);
> + if (unlikely(!tmp)) {
> + memset((void *)pidns_info, 0, (size_t) size);
> + return -ENOMEM;
> + }
> + len = strlen(pidns_path) + 1;
> + memcpy((char *)tmp->name, pidns_path, len);
> + tmp->uptr = NULL;
> + tmp->aname = NULL;
> + tmp->refcnt = 1;
> + ret = filename_lookup(AT_FDCWD, tmp, 0, &kp, NULL);
> + if (ret) {
> + memset((void *)pidns_info, 0, (size_t) size);
> + return ret;
> + }
> + inode = d_backing_inode(kp.dentry);
> + pidns_info->dev = inode->i_sb->s_dev;
> + return 0;
> +clear:
> + memset((void *)pidns_info, 0, (size_t) size);
> + return -EINVAL;
> +}
> +
> +const struct bpf_func_proto bpf_get_current_pidns_info_proto = {
> + .func = bpf_get_current_pidns_info,
> + .gpl_only = false,
> + .ret_type = RET_INTEGER,
> + .arg1_type = ARG_PTR_TO_UNINIT_MEM,
> + .arg2_type = ARG_CONST_SIZE,
> +};
> +
> #ifdef CONFIG_CGROUPS
> BPF_CALL_0(bpf_get_current_cgroup_id)
> {
> diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
> index ca1255d14576..5e1dc22765a5 100644
> --- a/kernel/trace/bpf_trace.c
> +++ b/kernel/trace/bpf_trace.c
> @@ -709,6 +709,8 @@ tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
> #endif
> case BPF_FUNC_send_signal:
> return &bpf_send_signal_proto;
> + case BPF_FUNC_get_current_pidns_info:
> + return &bpf_get_current_pidns_info_proto;
> default:
> return NULL;
> }
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 3/3] tools/testing/selftests/bpf: Add self-tests for new helper.
2019-08-13 18:47 ` [PATCH bpf-next V9 3/3] tools/testing/selftests/bpf: Add self-tests for new helper Carlos Neira
@ 2019-08-13 23:19 ` Yonghong Song
0 siblings, 0 replies; 17+ messages in thread
From: Yonghong Song @ 2019-08-13 23:19 UTC (permalink / raw)
To: Carlos Neira, netdev; +Cc: ebiederm, brouer, bpf
On 8/13/19 11:47 AM, Carlos Neira wrote:
> From: Carlos <cneirabustos@gmail.com>
>
> Added self-tests for new helper bpf_get_current_pidns_info.
>
> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
> ---
> tools/include/uapi/linux/bpf.h | 31 ++++-
> tools/testing/selftests/bpf/Makefile | 2 +-
> tools/testing/selftests/bpf/bpf_helpers.h | 3 +
> .../testing/selftests/bpf/progs/test_pidns_kern.c | 51 ++++++++
> tools/testing/selftests/bpf/test_pidns.c | 138 +++++++++++++++++++++
Could you break this patch into two?
patch 1: tools/include/uapi/linux/bpf.h
patch 2: rest of changes
> 5 files changed, 223 insertions(+), 2 deletions(-)
> create mode 100644 tools/testing/selftests/bpf/progs/test_pidns_kern.c
> create mode 100644 tools/testing/selftests/bpf/test_pidns.c
>
> diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
> index 4393bd4b2419..db241857ec15 100644
> --- a/tools/include/uapi/linux/bpf.h
> +++ b/tools/include/uapi/linux/bpf.h
> @@ -2741,6 +2741,28 @@ union bpf_attr {
> * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
> *
> * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
> + *
> + * int bpf_get_current_pidns_info(struct bpf_pidns_info *pidns, u32 size_of_pidns)
> + * Description
> + * Copies into *pidns* pid, namespace id and tgid as seen by the
> + * current namespace and also device from /proc/self/ns/pid.
> + * *size_of_pidns* must be the size of *pidns*
> + *
> + * This helper is used when pid filtering is needed inside a
> + * container as bpf_get_current_tgid() helper returns always the
> + * pid id as seen by the root namespace.
> + * Return
> + * 0 on success
> + *
> + * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
> + * or tgid of the current task.
> + *
> + * **-ECHILD** if /proc/self/ns/pid does not exists.
> + *
> + * **-ENOTDIR** if /proc/self/ns does not exists.
> + *
> + * **-ENOMEM** if allocation fails.
> + *
> */
> #define __BPF_FUNC_MAPPER(FN) \
> FN(unspec), \
> @@ -2853,7 +2875,8 @@ union bpf_attr {
> FN(sk_storage_get), \
> FN(sk_storage_delete), \
> FN(send_signal), \
> - FN(tcp_gen_syncookie),
> + FN(tcp_gen_syncookie), \
> + FN(get_current_pidns_info),
>
> /* integer value in 'imm' field of BPF_CALL instruction selects which helper
> * function eBPF program intends to call
> @@ -3604,4 +3627,10 @@ struct bpf_sockopt {
> __s32 retval;
> };
>
> +struct bpf_pidns_info {
> + __u32 dev;
> + __u32 nsid;
> + __u32 tgid;
> + __u32 pid;
> +};
> #endif /* _UAPI__LINUX_BPF_H__ */
> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> index 3bd0f4a0336a..1f97b571b581 100644
> --- a/tools/testing/selftests/bpf/Makefile
> +++ b/tools/testing/selftests/bpf/Makefile
> @@ -29,7 +29,7 @@ TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test
> test_cgroup_storage test_select_reuseport test_section_names \
> test_netcnt test_tcpnotify_user test_sock_fields test_sysctl test_hashmap \
> test_btf_dump test_cgroup_attach xdping test_sockopt test_sockopt_sk \
> - test_sockopt_multi test_tcp_rtt
> + test_sockopt_multi test_tcp_rtt test_pidns
>
> BPF_OBJ_FILES = $(patsubst %.c,%.o, $(notdir $(wildcard progs/*.c)))
> TEST_GEN_FILES = $(BPF_OBJ_FILES)
> diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
> index 8b503ea142f0..3fae3b9fcd2c 100644
> --- a/tools/testing/selftests/bpf/bpf_helpers.h
> +++ b/tools/testing/selftests/bpf/bpf_helpers.h
> @@ -231,6 +231,9 @@ static int (*bpf_send_signal)(unsigned sig) = (void *)BPF_FUNC_send_signal;
> static long long (*bpf_tcp_gen_syncookie)(struct bpf_sock *sk, void *ip,
> int ip_len, void *tcp, int tcp_len) =
> (void *) BPF_FUNC_tcp_gen_syncookie;
> +static int (*bpf_get_current_pidns_info)(struct bpf_pidns_info *buf,
> + unsigned int buf_size) =
> + (void *) BPF_FUNC_get_current_pidns_info;
>
> /* llvm builtin functions that eBPF C program may use to
> * emit BPF_LD_ABS and BPF_LD_IND instructions
> diff --git a/tools/testing/selftests/bpf/progs/test_pidns_kern.c b/tools/testing/selftests/bpf/progs/test_pidns_kern.c
> new file mode 100644
> index 000000000000..e1d2facfa762
> --- /dev/null
> +++ b/tools/testing/selftests/bpf/progs/test_pidns_kern.c
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2018 Carlos Neira cneirabustos@gmail.com
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of version 2 of the GNU General Public
> + * License as published by the Free Software Foundation.
> + */
> +
> +#include <linux/bpf.h>
> +#include <errno.h>
> +#include "bpf_helpers.h"
> +
> +struct bpf_map_def SEC("maps") nsidmap = {
> + .type = BPF_MAP_TYPE_ARRAY,
> + .key_size = sizeof(__u32),
> + .value_size = sizeof(__u32),
> + .max_entries = 1,
> +};
> +
> +struct bpf_map_def SEC("maps") pidmap = {
> + .type = BPF_MAP_TYPE_ARRAY,
> + .key_size = sizeof(__u32),
> + .value_size = sizeof(__u32),
> + .max_entries = 1,
> +};
Could you use new map definitions. Search
"SEC(".maps")" for examples.
> +
> +SEC("tracepoint/syscalls/sys_enter_nanosleep")
> +int trace(void *ctx)
> +{
> + struct bpf_pidns_info nsinfo;
> + __u32 key = 0, *expected_pid, *val;
> + char fmt[] = "ERROR nspid:%d\n";
> +
> + if (bpf_get_current_pidns_info(&nsinfo, sizeof(nsinfo)))
> + return -EINVAL;
> +
> + expected_pid = bpf_map_lookup_elem(&pidmap, &key);
> +
> +
> + if (!expected_pid || *expected_pid != nsinfo.pid)
> + return 0;
>
I would like you to compare device major/minor, namespace id,
pid and tid. We should test everything here.
+
> + val = bpf_map_lookup_elem(&nsidmap, &key);
> + if (val)
> + *val = nsinfo.nsid;
> +
> + return 0;
> +}
> +
> +char _license[] SEC("license") = "GPL";
> +__u32 _version SEC("version") = 1;
> diff --git a/tools/testing/selftests/bpf/test_pidns.c b/tools/testing/selftests/bpf/test_pidns.c
> new file mode 100644
> index 000000000000..a7254055f294
> --- /dev/null
> +++ b/tools/testing/selftests/bpf/test_pidns.c
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2018 Carlos Neira cneirabustos@gmail.com
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of version 2 of the GNU General Public
> + * License as published by the Free Software Foundation.
> + */
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <syscall.h>
> +#include <unistd.h>
> +#include <linux/perf_event.h>
> +#include <sys/ioctl.h>
> +#include <sys/time.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +
> +#include <linux/bpf.h>
> +#include <bpf/bpf.h>
> +#include <bpf/libbpf.h>
> +
> +#include "cgroup_helpers.h"
> +#include "bpf_rlimit.h"
> +
> +#define CHECK(condition, tag, format...) ({ \
> + int __ret = !!(condition); \
> + if (__ret) { \
> + printf("%s:FAIL:%s ", __func__, tag); \
> + printf(format); \
> + } else { \
> + printf("%s:PASS:%s\n", __func__, tag); \
> + } \
> + __ret; \
> +})
> +
> +static int bpf_find_map(const char *test, struct bpf_object *obj,
> + const char *name)
> +{
> + struct bpf_map *map;
> +
> + map = bpf_object__find_map_by_name(obj, name);
> + if (!map)
> + return -1;
> + return bpf_map__fd(map);
> +}
> +
> +
> +int main(int argc, char **argv)
> +{
> + const char *probe_name = "syscalls/sys_enter_nanosleep";
> + const char *file = "test_pidns_kern.o";
> + int err, bytes, efd, prog_fd, pmu_fd;
> + int pidmap_fd, nsidmap_fd;
> + struct perf_event_attr attr = {};
> + struct bpf_object *obj;
> + __u32 knsid = 0;
> + __u32 key = 0, pid;
> + int exit_code = 1;
> + struct stat st;
> + char buf[256];
> +
> + err = bpf_prog_load(file, BPF_PROG_TYPE_TRACEPOINT, &obj, &prog_fd);
> + if (CHECK(err, "bpf_prog_load", "err %d errno %d\n", err, errno))
> + goto cleanup_cgroup_env;
> +
> + nsidmap_fd = bpf_find_map(__func__, obj, "nsidmap");
> + if (CHECK(nsidmap_fd < 0, "bpf_find_map", "err %d errno %d\n",
> + nsidmap_fd, errno))
> + goto close_prog;
> +
> + pidmap_fd = bpf_find_map(__func__, obj, "pidmap");
> + if (CHECK(pidmap_fd < 0, "bpf_find_map", "err %d errno %d\n",
> + pidmap_fd, errno))
> + goto close_prog;
> +
> + pid = getpid();
> + bpf_map_update_elem(pidmap_fd, &key, &pid, 0);
> +
> + snprintf(buf, sizeof(buf),
> + "/sys/kernel/debug/tracing/events/%s/id", probe_name);
> + efd = open(buf, O_RDONLY, 0);
> + if (CHECK(efd < 0, "open", "err %d errno %d\n", efd, errno))
> + goto close_prog;
> + bytes = read(efd, buf, sizeof(buf));
> + close(efd);
> + if (CHECK(bytes <= 0 || bytes >= sizeof(buf), "read",
> + "bytes %d errno %d\n", bytes, errno))
> + goto close_prog;
Please use libbpf perf APIs.
It would be good if the test actually create a namespace and do the test.
Do you think it is possible to use the existing test_progs
infrastructure. The current one without creating pid namespace
surely fit in. Not sure if we add creating/deleting namespace,
I would think it should fit in as well.
> +
> + attr.config = strtol(buf, NULL, 0);
> + attr.type = PERF_TYPE_TRACEPOINT;
> + attr.sample_type = PERF_SAMPLE_RAW;
> + attr.sample_period = 1;
> + attr.wakeup_events = 1;
> +
> + pmu_fd = syscall(__NR_perf_event_open, &attr, getpid(), -1, -1, 0);
> + if (CHECK(pmu_fd < 0, "perf_event_open", "err %d errno %d\n", pmu_fd,
> + errno))
> + goto close_prog;
> +
> + err = ioctl(pmu_fd, PERF_EVENT_IOC_ENABLE, 0);
> + if (CHECK(err, "perf_event_ioc_enable", "err %d errno %d\n", err,
> + errno))
> + goto close_pmu;
> +
> + err = ioctl(pmu_fd, PERF_EVENT_IOC_SET_BPF, prog_fd);
> + if (CHECK(err, "perf_event_ioc_set_bpf", "err %d errno %d\n", err,
> + errno))
> + goto close_pmu;
> +
> + /* trigger some syscalls */
> + sleep(1);
> +
> + err = bpf_map_lookup_elem(nsidmap_fd, &key, &knsid);
> + if (CHECK(err, "bpf_map_lookup_elem", "err %d errno %d\n", err, errno))
> + goto close_pmu;
> +
> + if (stat("/proc/self/ns/pid", &st))
> + goto close_pmu;
> +
> + if (CHECK(knsid != (__u32) st.st_ino, "compare_namespace_id",
> + "kern knsid %u user unsid %u\n", knsid, (__u32) st.st_ino))
> + goto close_pmu;
> +
> + exit_code = 0;
> + printf("%s:PASS\n", argv[0]);
> +
> +close_pmu:
> + close(pmu_fd);
> +close_prog:
> + bpf_object__close(obj);
> +cleanup_cgroup_env:
> + return exit_code;
> +}
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Potential Spoof] Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-13 23:11 ` Yonghong Song
@ 2019-08-13 23:51 ` Yonghong Song
2019-08-14 0:56 ` Carlos Antonio Neira Bustos
1 sibling, 0 replies; 17+ messages in thread
From: Yonghong Song @ 2019-08-13 23:51 UTC (permalink / raw)
To: Carlos Neira, netdev; +Cc: ebiederm, brouer, bpf
On 8/13/19 4:11 PM, Yonghong Song wrote:
>
>
> On 8/13/19 11:47 AM, Carlos Neira wrote:
>> From: Carlos <cneirabustos@gmail.com>
>>
>> New bpf helper bpf_get_current_pidns_info.
>> This helper obtains the active namespace from current and returns
>> pid, tgid, device and namespace id as seen from that namespace,
>> allowing to instrument a process inside a container.
>>
>> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
>> ---
>> fs/internal.h | 2 --
>> fs/namei.c | 1 -
>> include/linux/bpf.h | 1 +
>> include/linux/namei.h | 4 +++
>> include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
>> kernel/bpf/core.c | 1 +
>> kernel/bpf/helpers.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
>> kernel/trace/bpf_trace.c | 2 ++
>> 8 files changed, 102 insertions(+), 4 deletions(-)
>>
>> diff --git a/fs/internal.h b/fs/internal.h
>> index 315fcd8d237c..6647e15dd419 100644
>> --- a/fs/internal.h
>> +++ b/fs/internal.h
>> @@ -59,8 +59,6 @@ extern int finish_clean_context(struct fs_context *fc);
>> /*
>> * namei.c
>> */
>> -extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
>> - struct path *path, struct path *root);
>> extern int user_path_mountpoint_at(int, const char __user *, unsigned int, struct path *);
>> extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
>> const char *, unsigned int, struct path *);
>> diff --git a/fs/namei.c b/fs/namei.c
>> index 209c51a5226c..a89fc72a4a10 100644
>> --- a/fs/namei.c
>> +++ b/fs/namei.c
>> @@ -19,7 +19,6 @@
>> #include <linux/export.h>
>> #include <linux/kernel.h>
>> #include <linux/slab.h>
>> -#include <linux/fs.h>
>> #include <linux/namei.h>
>> #include <linux/pagemap.h>
>> #include <linux/fsnotify.h>
>> diff --git a/include/linux/bpf.h b/include/linux/bpf.h
>> index f9a506147c8a..e4adf5e05afd 100644
>> --- a/include/linux/bpf.h
>> +++ b/include/linux/bpf.h
>> @@ -1050,6 +1050,7 @@ extern const struct bpf_func_proto bpf_get_local_storage_proto;
>> extern const struct bpf_func_proto bpf_strtol_proto;
>> extern const struct bpf_func_proto bpf_strtoul_proto;
>> extern const struct bpf_func_proto bpf_tcp_sock_proto;
>> +extern const struct bpf_func_proto bpf_get_current_pidns_info_proto;
>>
>> /* Shared helpers among cBPF and eBPF. */
>> void bpf_user_rnd_init_once(void);
>> diff --git a/include/linux/namei.h b/include/linux/namei.h
>> index 9138b4471dbf..b45c8b6f7cb4 100644
>> --- a/include/linux/namei.h
>> +++ b/include/linux/namei.h
>> @@ -6,6 +6,7 @@
>> #include <linux/path.h>
>> #include <linux/fcntl.h>
>> #include <linux/errno.h>
>> +#include <linux/fs.h>
>>
>> enum { MAX_NESTED_LINKS = 8 };
>>
>> @@ -97,6 +98,9 @@ extern void unlock_rename(struct dentry *, struct dentry *);
>>
>> extern void nd_jump_link(struct path *path);
>>
>> +extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
>> + struct path *path, struct path *root);
>> +
>> static inline void nd_terminate_link(void *name, size_t len, size_t maxlen)
>> {
>> ((char *) name)[min(len, maxlen)] = '\0';
>> diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
>> index 4393bd4b2419..db241857ec15 100644
>> --- a/include/uapi/linux/bpf.h
>> +++ b/include/uapi/linux/bpf.h
>> @@ -2741,6 +2741,28 @@ union bpf_attr {
>> * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
>> *
>> * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
>> + *
>> + * int bpf_get_current_pidns_info(struct bpf_pidns_info *pidns, u32 size_of_pidns)
>> + * Description
>> + * Copies into *pidns* pid, namespace id and tgid as seen by the
>> + * current namespace and also device from /proc/self/ns/pid.
>> + * *size_of_pidns* must be the size of *pidns*
>> + *
>> + * This helper is used when pid filtering is needed inside a
>> + * container as bpf_get_current_tgid() helper returns always the
>> + * pid id as seen by the root namespace.
>> + * Return
>> + * 0 on success
>> + *
>> + * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
>> + * or tgid of the current task.
>> + *
>> + * **-ECHILD** if /proc/self/ns/pid does not exists.
>> + *
>> + * **-ENOTDIR** if /proc/self/ns does not exists.
>> + *
>> + * **-ENOMEM** if allocation fails.
>> + *
>> */
>> #define __BPF_FUNC_MAPPER(FN) \
>> FN(unspec), \
>> @@ -2853,7 +2875,8 @@ union bpf_attr {
>> FN(sk_storage_get), \
>> FN(sk_storage_delete), \
>> FN(send_signal), \
>> - FN(tcp_gen_syncookie),
>> + FN(tcp_gen_syncookie), \
>> + FN(get_current_pidns_info),
>>
>> /* integer value in 'imm' field of BPF_CALL instruction selects which helper
>> * function eBPF program intends to call
>> @@ -3604,4 +3627,10 @@ struct bpf_sockopt {
>> __s32 retval;
>> };
>>
>> +struct bpf_pidns_info {
>> + __u32 dev;
>> + __u32 nsid;
>> + __u32 tgid;
>> + __u32 pid;
>> +};
>> #endif /* _UAPI__LINUX_BPF_H__ */
>> diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
>> index 8191a7db2777..3159f2a0188c 100644
>> --- a/kernel/bpf/core.c
>> +++ b/kernel/bpf/core.c
>> @@ -2038,6 +2038,7 @@ const struct bpf_func_proto bpf_get_current_uid_gid_proto __weak;
>> const struct bpf_func_proto bpf_get_current_comm_proto __weak;
>> const struct bpf_func_proto bpf_get_current_cgroup_id_proto __weak;
>> const struct bpf_func_proto bpf_get_local_storage_proto __weak;
>> +const struct bpf_func_proto bpf_get_current_pidns_info __weak;
>>
>> const struct bpf_func_proto * __weak bpf_get_trace_printk_proto(void)
>> {
>> diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
>> index 5e28718928ca..41fbf1f28a48 100644
>> --- a/kernel/bpf/helpers.c
>> +++ b/kernel/bpf/helpers.c
>> @@ -11,6 +11,12 @@
>> #include <linux/uidgid.h>
>> #include <linux/filter.h>
>> #include <linux/ctype.h>
>> +#include <linux/pid_namespace.h>
>> +#include <linux/major.h>
>> +#include <linux/stat.h>
>> +#include <linux/namei.h>
>> +#include <linux/version.h>
>> +
>>
>> #include "../../lib/kstrtox.h"
>>
>> @@ -312,6 +318,64 @@ void copy_map_value_locked(struct bpf_map *map, void *dst, void *src,
>> preempt_enable();
>> }
>>
>> +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *, pidns_info, u32,
>> + size)
>> +{
>> + const char *pidns_path = "/proc/self/ns/pid";
>> + struct pid_namespace *pidns = NULL;
>> + struct filename *tmp = NULL;
>> + struct inode *inode;
>> + struct path kp;
>> + pid_t tgid = 0;
>> + pid_t pid = 0;
>> + int ret;
>> + int len;
>
> I am running your sample program and get the following kernel bug:
>
> ...
> [ 26.414825] BUG: sleeping function called from invalid context at
> /data/users/yhs/work/net-next/fs
> /dcache.c:843
> [ 26.416314] in_atomic(): 1, irqs_disabled(): 0, pid: 1911, name: ping
> [ 26.417189] CPU: 0 PID: 1911 Comm: ping Tainted: G W
> 5.3.0-rc1+ #280
> [ 26.418182] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
> BIOS 1.9.3-1.el7.centos 04/01/2
> 014
> [ 26.419393] Call Trace:
> [ 26.419697] <IRQ>
> [ 26.419960] dump_stack+0x46/0x5b
> [ 26.420434] ___might_sleep+0xe4/0x110
> [ 26.420894] dput+0x2a/0x200
> [ 26.421265] walk_component+0x10c/0x280
> [ 26.421773] link_path_walk+0x327/0x560
> [ 26.422280] ? proc_ns_dir_readdir+0x1a0/0x1a0
> [ 26.422848] ? path_init+0x232/0x330
> [ 26.423364] path_lookupat+0x88/0x200
> [ 26.423808] ? selinux_parse_skb.constprop.69+0x124/0x430
> [ 26.424521] filename_lookup+0xaf/0x190
> [ 26.425031] ? simple_attr_release+0x20/0x20
> [ 26.425560] bpf_get_current_pidns_info+0xfa/0x190
> [ 26.426168] bpf_prog_83627154cefed596+0xe66/0x1000
> [ 26.426779] trace_call_bpf+0xb5/0x160
> [ 26.427317] ? __netif_receive_skb_core+0x1/0xbb0
> [ 26.427929] ? __netif_receive_skb_core+0x1/0xbb0
> [ 26.428496] kprobe_perf_func+0x4d/0x280
> [ 26.428986] ? tracing_record_taskinfo_skip+0x1a/0x30
> [ 26.429584] ? tracing_record_taskinfo+0xe/0x80
> [ 26.430152] ? ttwu_do_wakeup.isra.114+0xcf/0xf0
> [ 26.430737] ? __netif_receive_skb_core+0x1/0xbb0
> [ 26.431334] ? __netif_receive_skb_core+0x5/0xbb0
> [ 26.431930] kprobe_ftrace_handler+0x90/0xf0
> [ 26.432495] ftrace_ops_assist_func+0x63/0x100
> [ 26.433060] 0xffffffffc03180bf
> [ 26.433471] ? __netif_receive_skb_core+0x1/0xbb0
> ...
>
> To prevent we are running in arbitrary task (e.g., idle task)
> context which may introduce sleeping issues, the following
> probably appropriate:
>
> if (in_nmi() || in_softirq())
> return -EPERM;
A better condition is (from helper bpf_probe_write_user()):
if (unlikely(in_interrupt() ||
current->flags & (PF_KTHREAD | PF_EXITING)))
return -EPERM;
>
> Anyway, if in nmi or softirq, the namespace and pid/tgid
> we get may be just accidentally associated with the bpf running
> context, but it could be in a different context. So such info
> is not reliable any way.
>
>> +
>> + if (unlikely(size != sizeof(struct bpf_pidns_info)))
>> + return -EINVAL;
>> + pidns = task_active_pid_ns(current);
>> + if (unlikely(!pidns))
>> + goto clear;
>> + pidns_info->nsid = pidns->ns.inum;
>> + pid = task_pid_nr_ns(current, pidns);
>> + if (unlikely(!pid))
>> + goto clear;
>> + tgid = task_tgid_nr_ns(current, pidns);
>> + if (unlikely(!tgid))
>> + goto clear;
>> + pidns_info->tgid = (u32) tgid;
>> + pidns_info->pid = (u32) pid;
>> + tmp = kmem_cache_alloc(names_cachep, GFP_ATOMIC);
>> + if (unlikely(!tmp)) {
>> + memset((void *)pidns_info, 0, (size_t) size);
>> + return -ENOMEM;
>> + }
>> + len = strlen(pidns_path) + 1;
>> + memcpy((char *)tmp->name, pidns_path, len);
>> + tmp->uptr = NULL;
>> + tmp->aname = NULL;
>> + tmp->refcnt = 1;
>> + ret = filename_lookup(AT_FDCWD, tmp, 0, &kp, NULL);
>> + if (ret) {
>> + memset((void *)pidns_info, 0, (size_t) size);
>> + return ret;
>> + }
>> + inode = d_backing_inode(kp.dentry);
>> + pidns_info->dev = inode->i_sb->s_dev;
>> + return 0;
>> +clear:
>> + memset((void *)pidns_info, 0, (size_t) size);
>> + return -EINVAL;
>> +}
>> +
>> +const struct bpf_func_proto bpf_get_current_pidns_info_proto = {
>> + .func = bpf_get_current_pidns_info,
>> + .gpl_only = false,
>> + .ret_type = RET_INTEGER,
>> + .arg1_type = ARG_PTR_TO_UNINIT_MEM,
>> + .arg2_type = ARG_CONST_SIZE,
>> +};
>> +
>> #ifdef CONFIG_CGROUPS
>> BPF_CALL_0(bpf_get_current_cgroup_id)
>> {
>> diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
>> index ca1255d14576..5e1dc22765a5 100644
>> --- a/kernel/trace/bpf_trace.c
>> +++ b/kernel/trace/bpf_trace.c
>> @@ -709,6 +709,8 @@ tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
>> #endif
>> case BPF_FUNC_send_signal:
>> return &bpf_send_signal_proto;
>> + case BPF_FUNC_get_current_pidns_info:
>> + return &bpf_get_current_pidns_info_proto;
>> default:
>> return NULL;
>> }
>>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-13 23:11 ` Yonghong Song
2019-08-13 23:51 ` [Potential Spoof] " Yonghong Song
@ 2019-08-14 0:56 ` Carlos Antonio Neira Bustos
2019-08-14 4:50 ` Yonghong Song
1 sibling, 1 reply; 17+ messages in thread
From: Carlos Antonio Neira Bustos @ 2019-08-14 0:56 UTC (permalink / raw)
To: Yonghong Song; +Cc: netdev, ebiederm, brouer, bpf
On Tue, Aug 13, 2019 at 11:11:14PM +0000, Yonghong Song wrote:
>
>
> On 8/13/19 11:47 AM, Carlos Neira wrote:
> > From: Carlos <cneirabustos@gmail.com>
> >
> > New bpf helper bpf_get_current_pidns_info.
> > This helper obtains the active namespace from current and returns
> > pid, tgid, device and namespace id as seen from that namespace,
> > allowing to instrument a process inside a container.
> >
> > Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
> > ---
> > fs/internal.h | 2 --
> > fs/namei.c | 1 -
> > include/linux/bpf.h | 1 +
> > include/linux/namei.h | 4 +++
> > include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
> > kernel/bpf/core.c | 1 +
> > kernel/bpf/helpers.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
> > kernel/trace/bpf_trace.c | 2 ++
> > 8 files changed, 102 insertions(+), 4 deletions(-)
> >
> > diff --git a/fs/internal.h b/fs/internal.h
> > index 315fcd8d237c..6647e15dd419 100644
> > --- a/fs/internal.h
> > +++ b/fs/internal.h
> > @@ -59,8 +59,6 @@ extern int finish_clean_context(struct fs_context *fc);
> > /*
> > * namei.c
> > */
> > -extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
> > - struct path *path, struct path *root);
> > extern int user_path_mountpoint_at(int, const char __user *, unsigned int, struct path *);
> > extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
> > const char *, unsigned int, struct path *);
> > diff --git a/fs/namei.c b/fs/namei.c
> > index 209c51a5226c..a89fc72a4a10 100644
> > --- a/fs/namei.c
> > +++ b/fs/namei.c
> > @@ -19,7 +19,6 @@
> > #include <linux/export.h>
> > #include <linux/kernel.h>
> > #include <linux/slab.h>
> > -#include <linux/fs.h>
> > #include <linux/namei.h>
> > #include <linux/pagemap.h>
> > #include <linux/fsnotify.h>
> > diff --git a/include/linux/bpf.h b/include/linux/bpf.h
> > index f9a506147c8a..e4adf5e05afd 100644
> > --- a/include/linux/bpf.h
> > +++ b/include/linux/bpf.h
> > @@ -1050,6 +1050,7 @@ extern const struct bpf_func_proto bpf_get_local_storage_proto;
> > extern const struct bpf_func_proto bpf_strtol_proto;
> > extern const struct bpf_func_proto bpf_strtoul_proto;
> > extern const struct bpf_func_proto bpf_tcp_sock_proto;
> > +extern const struct bpf_func_proto bpf_get_current_pidns_info_proto;
> >
> > /* Shared helpers among cBPF and eBPF. */
> > void bpf_user_rnd_init_once(void);
> > diff --git a/include/linux/namei.h b/include/linux/namei.h
> > index 9138b4471dbf..b45c8b6f7cb4 100644
> > --- a/include/linux/namei.h
> > +++ b/include/linux/namei.h
> > @@ -6,6 +6,7 @@
> > #include <linux/path.h>
> > #include <linux/fcntl.h>
> > #include <linux/errno.h>
> > +#include <linux/fs.h>
> >
> > enum { MAX_NESTED_LINKS = 8 };
> >
> > @@ -97,6 +98,9 @@ extern void unlock_rename(struct dentry *, struct dentry *);
> >
> > extern void nd_jump_link(struct path *path);
> >
> > +extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
> > + struct path *path, struct path *root);
> > +
> > static inline void nd_terminate_link(void *name, size_t len, size_t maxlen)
> > {
> > ((char *) name)[min(len, maxlen)] = '\0';
> > diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
> > index 4393bd4b2419..db241857ec15 100644
> > --- a/include/uapi/linux/bpf.h
> > +++ b/include/uapi/linux/bpf.h
> > @@ -2741,6 +2741,28 @@ union bpf_attr {
> > * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
> > *
> > * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
> > + *
> > + * int bpf_get_current_pidns_info(struct bpf_pidns_info *pidns, u32 size_of_pidns)
> > + * Description
> > + * Copies into *pidns* pid, namespace id and tgid as seen by the
> > + * current namespace and also device from /proc/self/ns/pid.
> > + * *size_of_pidns* must be the size of *pidns*
> > + *
> > + * This helper is used when pid filtering is needed inside a
> > + * container as bpf_get_current_tgid() helper returns always the
> > + * pid id as seen by the root namespace.
> > + * Return
> > + * 0 on success
> > + *
> > + * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
> > + * or tgid of the current task.
> > + *
> > + * **-ECHILD** if /proc/self/ns/pid does not exists.
> > + *
> > + * **-ENOTDIR** if /proc/self/ns does not exists.
> > + *
> > + * **-ENOMEM** if allocation fails.
> > + *
> > */
> > #define __BPF_FUNC_MAPPER(FN) \
> > FN(unspec), \
> > @@ -2853,7 +2875,8 @@ union bpf_attr {
> > FN(sk_storage_get), \
> > FN(sk_storage_delete), \
> > FN(send_signal), \
> > - FN(tcp_gen_syncookie),
> > + FN(tcp_gen_syncookie), \
> > + FN(get_current_pidns_info),
> >
> > /* integer value in 'imm' field of BPF_CALL instruction selects which helper
> > * function eBPF program intends to call
> > @@ -3604,4 +3627,10 @@ struct bpf_sockopt {
> > __s32 retval;
> > };
> >
> > +struct bpf_pidns_info {
> > + __u32 dev;
> > + __u32 nsid;
> > + __u32 tgid;
> > + __u32 pid;
> > +};
> > #endif /* _UAPI__LINUX_BPF_H__ */
> > diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
> > index 8191a7db2777..3159f2a0188c 100644
> > --- a/kernel/bpf/core.c
> > +++ b/kernel/bpf/core.c
> > @@ -2038,6 +2038,7 @@ const struct bpf_func_proto bpf_get_current_uid_gid_proto __weak;
> > const struct bpf_func_proto bpf_get_current_comm_proto __weak;
> > const struct bpf_func_proto bpf_get_current_cgroup_id_proto __weak;
> > const struct bpf_func_proto bpf_get_local_storage_proto __weak;
> > +const struct bpf_func_proto bpf_get_current_pidns_info __weak;
> >
> > const struct bpf_func_proto * __weak bpf_get_trace_printk_proto(void)
> > {
> > diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
> > index 5e28718928ca..41fbf1f28a48 100644
> > --- a/kernel/bpf/helpers.c
> > +++ b/kernel/bpf/helpers.c
> > @@ -11,6 +11,12 @@
> > #include <linux/uidgid.h>
> > #include <linux/filter.h>
> > #include <linux/ctype.h>
> > +#include <linux/pid_namespace.h>
> > +#include <linux/major.h>
> > +#include <linux/stat.h>
> > +#include <linux/namei.h>
> > +#include <linux/version.h>
> > +
> >
> > #include "../../lib/kstrtox.h"
> >
> > @@ -312,6 +318,64 @@ void copy_map_value_locked(struct bpf_map *map, void *dst, void *src,
> > preempt_enable();
> > }
> >
> > +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *, pidns_info, u32,
> > + size)
> > +{
> > + const char *pidns_path = "/proc/self/ns/pid";
> > + struct pid_namespace *pidns = NULL;
> > + struct filename *tmp = NULL;
> > + struct inode *inode;
> > + struct path kp;
> > + pid_t tgid = 0;
> > + pid_t pid = 0;
> > + int ret;
> > + int len;
>
Thank you very much for catching this!.
Could you share how to replicate this bug?.
> I am running your sample program and get the following kernel bug:
>
> ...
> [ 26.414825] BUG: sleeping function called from invalid context at
> /data/users/yhs/work/net-next/fs
> /dcache.c:843
> [ 26.416314] in_atomic(): 1, irqs_disabled(): 0, pid: 1911, name: ping
> [ 26.417189] CPU: 0 PID: 1911 Comm: ping Tainted: G W
> 5.3.0-rc1+ #280
> [ 26.418182] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
> BIOS 1.9.3-1.el7.centos 04/01/2
> 014
> [ 26.419393] Call Trace:
> [ 26.419697] <IRQ>
> [ 26.419960] dump_stack+0x46/0x5b
> [ 26.420434] ___might_sleep+0xe4/0x110
> [ 26.420894] dput+0x2a/0x200
> [ 26.421265] walk_component+0x10c/0x280
> [ 26.421773] link_path_walk+0x327/0x560
> [ 26.422280] ? proc_ns_dir_readdir+0x1a0/0x1a0
> [ 26.422848] ? path_init+0x232/0x330
> [ 26.423364] path_lookupat+0x88/0x200
> [ 26.423808] ? selinux_parse_skb.constprop.69+0x124/0x430
> [ 26.424521] filename_lookup+0xaf/0x190
> [ 26.425031] ? simple_attr_release+0x20/0x20
> [ 26.425560] bpf_get_current_pidns_info+0xfa/0x190
> [ 26.426168] bpf_prog_83627154cefed596+0xe66/0x1000
> [ 26.426779] trace_call_bpf+0xb5/0x160
> [ 26.427317] ? __netif_receive_skb_core+0x1/0xbb0
> [ 26.427929] ? __netif_receive_skb_core+0x1/0xbb0
> [ 26.428496] kprobe_perf_func+0x4d/0x280
> [ 26.428986] ? tracing_record_taskinfo_skip+0x1a/0x30
> [ 26.429584] ? tracing_record_taskinfo+0xe/0x80
> [ 26.430152] ? ttwu_do_wakeup.isra.114+0xcf/0xf0
> [ 26.430737] ? __netif_receive_skb_core+0x1/0xbb0
> [ 26.431334] ? __netif_receive_skb_core+0x5/0xbb0
> [ 26.431930] kprobe_ftrace_handler+0x90/0xf0
> [ 26.432495] ftrace_ops_assist_func+0x63/0x100
> [ 26.433060] 0xffffffffc03180bf
> [ 26.433471] ? __netif_receive_skb_core+0x1/0xbb0
> ...
>
> To prevent we are running in arbitrary task (e.g., idle task)
> context which may introduce sleeping issues, the following
> probably appropriate:
>
> if (in_nmi() || in_softirq())
> return -EPERM;
>
> Anyway, if in nmi or softirq, the namespace and pid/tgid
> we get may be just accidentally associated with the bpf running
> context, but it could be in a different context. So such info
> is not reliable any way.
>
> > +
> > + if (unlikely(size != sizeof(struct bpf_pidns_info)))
> > + return -EINVAL;
> > + pidns = task_active_pid_ns(current);
> > + if (unlikely(!pidns))
> > + goto clear;
> > + pidns_info->nsid = pidns->ns.inum;
> > + pid = task_pid_nr_ns(current, pidns);
> > + if (unlikely(!pid))
> > + goto clear;
> > + tgid = task_tgid_nr_ns(current, pidns);
> > + if (unlikely(!tgid))
> > + goto clear;
> > + pidns_info->tgid = (u32) tgid;
> > + pidns_info->pid = (u32) pid;
> > + tmp = kmem_cache_alloc(names_cachep, GFP_ATOMIC);
> > + if (unlikely(!tmp)) {
> > + memset((void *)pidns_info, 0, (size_t) size);
> > + return -ENOMEM;
> > + }
> > + len = strlen(pidns_path) + 1;
> > + memcpy((char *)tmp->name, pidns_path, len);
> > + tmp->uptr = NULL;
> > + tmp->aname = NULL;
> > + tmp->refcnt = 1;
> > + ret = filename_lookup(AT_FDCWD, tmp, 0, &kp, NULL);
> > + if (ret) {
> > + memset((void *)pidns_info, 0, (size_t) size);
> > + return ret;
> > + }
> > + inode = d_backing_inode(kp.dentry);
> > + pidns_info->dev = inode->i_sb->s_dev;
> > + return 0;
> > +clear:
> > + memset((void *)pidns_info, 0, (size_t) size);
> > + return -EINVAL;
> > +}
> > +
> > +const struct bpf_func_proto bpf_get_current_pidns_info_proto = {
> > + .func = bpf_get_current_pidns_info,
> > + .gpl_only = false,
> > + .ret_type = RET_INTEGER,
> > + .arg1_type = ARG_PTR_TO_UNINIT_MEM,
> > + .arg2_type = ARG_CONST_SIZE,
> > +};
> > +
> > #ifdef CONFIG_CGROUPS
> > BPF_CALL_0(bpf_get_current_cgroup_id)
> > {
> > diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
> > index ca1255d14576..5e1dc22765a5 100644
> > --- a/kernel/trace/bpf_trace.c
> > +++ b/kernel/trace/bpf_trace.c
> > @@ -709,6 +709,8 @@ tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
> > #endif
> > case BPF_FUNC_send_signal:
> > return &bpf_send_signal_proto;
> > + case BPF_FUNC_get_current_pidns_info:
> > + return &bpf_get_current_pidns_info_proto;
> > default:
> > return NULL;
> > }
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-14 0:56 ` Carlos Antonio Neira Bustos
@ 2019-08-14 4:50 ` Yonghong Song
[not found] ` <CACiB22jyN9=0ATWWE+x=BoWD6u+8KO+MvBfsFQmcNfkmANb2_w@mail.gmail.com>
0 siblings, 1 reply; 17+ messages in thread
From: Yonghong Song @ 2019-08-14 4:50 UTC (permalink / raw)
To: Carlos Antonio Neira Bustos; +Cc: netdev, ebiederm, brouer, bpf
[-- Attachment #1: Type: text/plain, Size: 4086 bytes --]
On 8/13/19 5:56 PM, Carlos Antonio Neira Bustos wrote:
> On Tue, Aug 13, 2019 at 11:11:14PM +0000, Yonghong Song wrote:
>>
>>
>> On 8/13/19 11:47 AM, Carlos Neira wrote:
>>> From: Carlos <cneirabustos@gmail.com>
>>>
>>> New bpf helper bpf_get_current_pidns_info.
>>> This helper obtains the active namespace from current and returns
>>> pid, tgid, device and namespace id as seen from that namespace,
>>> allowing to instrument a process inside a container.
>>>
>>> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
>>> ---
>>> fs/internal.h | 2 --
>>> fs/namei.c | 1 -
>>> include/linux/bpf.h | 1 +
>>> include/linux/namei.h | 4 +++
>>> include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
>>> kernel/bpf/core.c | 1 +
>>> kernel/bpf/helpers.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
>>> kernel/trace/bpf_trace.c | 2 ++
>>> 8 files changed, 102 insertions(+), 4 deletions(-)
>>>
[...]
>>>
>>> +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *, pidns_info, u32,
>>> + size)
>>> +{
>>> + const char *pidns_path = "/proc/self/ns/pid";
>>> + struct pid_namespace *pidns = NULL;
>>> + struct filename *tmp = NULL;
>>> + struct inode *inode;
>>> + struct path kp;
>>> + pid_t tgid = 0;
>>> + pid_t pid = 0;
>>> + int ret;
>>> + int len;
>>
>
> Thank you very much for catching this!.
> Could you share how to replicate this bug?.
The config is attached. just run trace_ns_info and you
can reproduce the issue.
>
>> I am running your sample program and get the following kernel bug:
>>
>> ...
>> [ 26.414825] BUG: sleeping function called from invalid context at
>> /data/users/yhs/work/net-next/fs
>> /dcache.c:843
>> [ 26.416314] in_atomic(): 1, irqs_disabled(): 0, pid: 1911, name: ping
>> [ 26.417189] CPU: 0 PID: 1911 Comm: ping Tainted: G W
>> 5.3.0-rc1+ #280
>> [ 26.418182] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
>> BIOS 1.9.3-1.el7.centos 04/01/2
>> 014
>> [ 26.419393] Call Trace:
>> [ 26.419697] <IRQ>
>> [ 26.419960] dump_stack+0x46/0x5b
>> [ 26.420434] ___might_sleep+0xe4/0x110
>> [ 26.420894] dput+0x2a/0x200
>> [ 26.421265] walk_component+0x10c/0x280
>> [ 26.421773] link_path_walk+0x327/0x560
>> [ 26.422280] ? proc_ns_dir_readdir+0x1a0/0x1a0
>> [ 26.422848] ? path_init+0x232/0x330
>> [ 26.423364] path_lookupat+0x88/0x200
>> [ 26.423808] ? selinux_parse_skb.constprop.69+0x124/0x430
>> [ 26.424521] filename_lookup+0xaf/0x190
>> [ 26.425031] ? simple_attr_release+0x20/0x20
>> [ 26.425560] bpf_get_current_pidns_info+0xfa/0x190
>> [ 26.426168] bpf_prog_83627154cefed596+0xe66/0x1000
>> [ 26.426779] trace_call_bpf+0xb5/0x160
>> [ 26.427317] ? __netif_receive_skb_core+0x1/0xbb0
>> [ 26.427929] ? __netif_receive_skb_core+0x1/0xbb0
>> [ 26.428496] kprobe_perf_func+0x4d/0x280
>> [ 26.428986] ? tracing_record_taskinfo_skip+0x1a/0x30
>> [ 26.429584] ? tracing_record_taskinfo+0xe/0x80
>> [ 26.430152] ? ttwu_do_wakeup.isra.114+0xcf/0xf0
>> [ 26.430737] ? __netif_receive_skb_core+0x1/0xbb0
>> [ 26.431334] ? __netif_receive_skb_core+0x5/0xbb0
>> [ 26.431930] kprobe_ftrace_handler+0x90/0xf0
>> [ 26.432495] ftrace_ops_assist_func+0x63/0x100
>> [ 26.433060] 0xffffffffc03180bf
>> [ 26.433471] ? __netif_receive_skb_core+0x1/0xbb0
>> ...
>>
>> To prevent we are running in arbitrary task (e.g., idle task)
>> context which may introduce sleeping issues, the following
>> probably appropriate:
>>
>> if (in_nmi() || in_softirq())
>> return -EPERM;
>>
>> Anyway, if in nmi or softirq, the namespace and pid/tgid
>> we get may be just accidentally associated with the bpf running
>> context, but it could be in a different context. So such info
>> is not reliable any way.
>>
>>> +
>>> + if (unlikely(size != sizeof(struct bpf_pidns_info)))
>>> + return -EINVAL;
>>> + pidns = task_active_pid_ns(current);
[...]
[-- Attachment #2: pidns.config --]
[-- Type: text/plain, Size: 123596 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.3.0-rc1 Kernel Configuration
#
#
# Compiler: gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-36)
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=40805
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_HEADER_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT_ALWAYS_ON is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_UMIP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0x0
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_NFIT is not set
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_EFI_EARLYCON=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_64BIT_TIME=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_FAST_GUP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_PTE_DEVMAP=y
# CONFIG_HMM_MIRROR is not set
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=y
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_IPV6_SEG6_LWTUNNEL=y
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_IPV6_SEG6_BPF=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_MASQUERADE=y
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# end of Core Netfilter Configuration
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_RAW is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP6_NF_RAW is not set
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_ACT_CSUM=y
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=y
CONFIG_NET_ACT_BPF=y
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=y
# CONFIG_NET_ACT_CT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
# CONFIG_FAILOVER is not set
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_BW is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# PCI controller drivers
#
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# CONFIG_VMD is not set
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not set
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set
#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
# end of Intel MIC & related support
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_INIT is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=y
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=y
# CONFIG_VIRTIO_NET is not set
CONFIG_NLMON=y
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
# CONFIG_LED_TRIGGER_PHY is not set
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
# CONFIG_AIRO_CS is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MSM_VIBRATOR is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_NULL_TTY is not set
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# end of Serial drivers
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# end of PCMCIA character devices
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# end of Character devices
# CONFIG_RANDOM_TRUST_CPU is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_CORE is not set
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
#
# Watchdog Pretimeout Governors
#
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_EBC_C384_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
# CONFIG_DRM_DP_CEC is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_SPIN_REQUEST=5
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# end of HD-Audio
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_X86=y
# CONFIG_HDMI_LPE_AUDIO is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
# end of I2C HID support
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_APU is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_AMD64 is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
# CONFIG_EDAC_SBRIDGE is not set
# CONFIG_EDAC_SKX is not set
# CONFIG_EDAC_I10NM is not set
# CONFIG_EDAC_PND2 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BD70528 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DCDBAS is not set
# CONFIG_DELL_SMBIOS is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_DELL_RBU is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
# CONFIG_I2C_MULTI_INSTANTIATE is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# end of Common Clock Framework
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_IRQ_REMAP is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_EFIVAR_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECRDSA is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS640_SSE2 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_XXHASH is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_KASAN_STACK=1
# end of Memory Debugging
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Lockups and Hangs
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-13 22:35 ` Yonghong Song
@ 2019-08-20 15:10 ` Carlos Antonio Neira Bustos
2019-08-20 17:29 ` Yonghong Song
0 siblings, 1 reply; 17+ messages in thread
From: Carlos Antonio Neira Bustos @ 2019-08-20 15:10 UTC (permalink / raw)
To: Yonghong Song; +Cc: netdev, ebiederm, brouer, bpf
Hi Yonghong,
Thanks for taking the time to review this.
> > + *
> > + * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
> > + * or tgid of the current task.
> > + *
> > + * **-ECHILD** if /proc/self/ns/pid does not exists.
> > + *
> > + * **-ENOTDIR** if /proc/self/ns does not exists.
>
> Let us remove ECHILD and ENOTDIR and replace it with ENOENT as I
> described below.
>
> Please *do verify* what happens when namespaces or pid_ns are not
> configured.
>
I have tested kernel configurations without namespace support and with
namespace support but without pid namespaces, the helper returns -EINVAL
on both cases, now it should return -ENOENT.
> > +struct bpf_pidns_info {
> > + __u32 dev;
>
> Please add a comment for dev for how device major and minor number are
> derived. User space gets device major and minor number, they need to
> compare to the corresponding major/minor numbers returned by this helper.
>
> > + __u32 nsid;
> > + __u32 tgid;
> > + __u32 pid;
> > +};
>
What do you think of this comment ?
struct bpf_pidns_info {
__u32 dev; /* major/minor numbers from /proc/self/ns/pid.
* User space gets device major and minor numbers from
* the same device that need to be compared against the
* major/minor numbers returned by this helper.
*/
__u32 nsid;
__u32 tgid;
__u32 pid;
};
>
> Please put an empty line. As a general rule for readability,
> put an empty line if control flow is interrupted, e.g., by
> "return", "break" or "continue". At least this is what
> I saw most in bpf mailing list.
>
I'll fix it in version 10.
> > + len = strlen(pidns_path) + 1;
> > + memcpy((char *)tmp->name, pidns_path, len);
> > + tmp->uptr = NULL;
> > + tmp->aname = NULL;
> > + tmp->refcnt = 1;
> > + ret = filename_lookup(AT_FDCWD, tmp, 0, &kp, NULL);
> Adding below to free kmem cache memory
> kmem_cache_free(names_cachep, fname);
>
I think we don't need to call kmem_cache_free as filename_lookup
calls putname that calls kmem_cache_free.
Thanks a lot for your help.
Bests
> In the above, we checked task_active_pid_ns().
> If not returning NULL, we have a valid pid ns. So the above
> filename_lookup should not go wrong. We can still keep
> the error checking though.
>
> > + if (ret) {
> > + memset((void *)pidns_info, 0, (size_t) size);
> > + return ret;
>
>
I think we could get rid of this.
On Tue, Aug 13, 2019 at 10:35:42PM +0000, Yonghong Song wrote:
>
>
> On 8/13/19 11:47 AM, Carlos Neira wrote:
> > From: Carlos <cneirabustos@gmail.com>
> >
> > New bpf helper bpf_get_current_pidns_info.
> > This helper obtains the active namespace from current and returns
> > pid, tgid, device and namespace id as seen from that namespace,
> > allowing to instrument a process inside a container.
> >
> > Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
> > ---
> > fs/internal.h | 2 --
> > fs/namei.c | 1 -
> > include/linux/bpf.h | 1 +
> > include/linux/namei.h | 4 +++
> > include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
> > kernel/bpf/core.c | 1 +
> > kernel/bpf/helpers.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++
> > kernel/trace/bpf_trace.c | 2 ++
> > 8 files changed, 102 insertions(+), 4 deletions(-)
>
> I prefer to break this into two patches to reduce
> the potential merging conflicts:
> patch 1: fs/internal.h, fs/namei.c, include/linux/namei.h
> patch 2: rest of changes
> patch 1 is simply a preparing patches to make filename_lookup
> available later.
>
> >
> > diff --git a/fs/internal.h b/fs/internal.h
> > index 315fcd8d237c..6647e15dd419 100644
> > --- a/fs/internal.h
> > +++ b/fs/internal.h
> > @@ -59,8 +59,6 @@ extern int finish_clean_context(struct fs_context *fc);
> > /*
> > * namei.c
> > */
> > -extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
> > - struct path *path, struct path *root);
> > extern int user_path_mountpoint_at(int, const char __user *, unsigned int, struct path *);
> > extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
> > const char *, unsigned int, struct path *);
> > diff --git a/fs/namei.c b/fs/namei.c
> > index 209c51a5226c..a89fc72a4a10 100644
> > --- a/fs/namei.c
> > +++ b/fs/namei.c
> > @@ -19,7 +19,6 @@
> > #include <linux/export.h>
> > #include <linux/kernel.h>
> > #include <linux/slab.h>
> > -#include <linux/fs.h>
> > #include <linux/namei.h>
> > #include <linux/pagemap.h>
> > #include <linux/fsnotify.h>
> > diff --git a/include/linux/bpf.h b/include/linux/bpf.h
> > index f9a506147c8a..e4adf5e05afd 100644
> > --- a/include/linux/bpf.h
> > +++ b/include/linux/bpf.h
> > @@ -1050,6 +1050,7 @@ extern const struct bpf_func_proto bpf_get_local_storage_proto;
> > extern const struct bpf_func_proto bpf_strtol_proto;
> > extern const struct bpf_func_proto bpf_strtoul_proto;
> > extern const struct bpf_func_proto bpf_tcp_sock_proto;
> > +extern const struct bpf_func_proto bpf_get_current_pidns_info_proto;
> >
> > /* Shared helpers among cBPF and eBPF. */
> > void bpf_user_rnd_init_once(void);
> > diff --git a/include/linux/namei.h b/include/linux/namei.h
> > index 9138b4471dbf..b45c8b6f7cb4 100644
> > --- a/include/linux/namei.h
> > +++ b/include/linux/namei.h
> > @@ -6,6 +6,7 @@
> > #include <linux/path.h>
> > #include <linux/fcntl.h>
> > #include <linux/errno.h>
> > +#include <linux/fs.h>
> >
> > enum { MAX_NESTED_LINKS = 8 };
> >
> > @@ -97,6 +98,9 @@ extern void unlock_rename(struct dentry *, struct dentry *);
> >
> > extern void nd_jump_link(struct path *path);
> >
> > +extern int filename_lookup(int dfd, struct filename *name, unsigned flags,
> > + struct path *path, struct path *root);
> > +
> > static inline void nd_terminate_link(void *name, size_t len, size_t maxlen)
> > {
> > ((char *) name)[min(len, maxlen)] = '\0';
> > diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
> > index 4393bd4b2419..db241857ec15 100644
> > --- a/include/uapi/linux/bpf.h
> > +++ b/include/uapi/linux/bpf.h
> > @@ -2741,6 +2741,28 @@ union bpf_attr {
> > * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
> > *
> > * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
> > + *
> > + * int bpf_get_current_pidns_info(struct bpf_pidns_info *pidns, u32 size_of_pidns)
>
> size_of_pidns => size.
>
> > + * Description
> > + * Copies into *pidns* pid, namespace id and tgid as seen by the
> Copies => Copy.
> Maybe something like below:
> Get tgid, pid and namespace id as seen by the current namespace, and
> device major/minor numbers from device /proc/self/ns/pid. Such
> information is stored in *pidns* of size *size*.
>
> > + * current namespace and also device from /proc/self/ns/pid.
> > + * *size_of_pidns* must be the size of *pidns*
> > + *
> > + * This helper is used when pid filtering is needed inside a
> > + * container as bpf_get_current_tgid() helper returns always the
>
> returns always => always returns.
>
> > + * pid id as seen by the root namespace.
> > + * Return
> > + * 0 on success
> > + *
> > + * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
> > + * or tgid of the current task.
> > + *
> > + * **-ECHILD** if /proc/self/ns/pid does not exists.
> > + *
> > + * **-ENOTDIR** if /proc/self/ns does not exists.
>
> Let us remove ECHILD and ENOTDIR and replace it with ENOENT as I
> described below.
>
> Please *do verify* what happens when namespaces or pid_ns are not
> configured.
>
> > + *
> > + * **-ENOMEM** if allocation fails.
>
> helper internal allocation fails.
>
> > + *
> > */
> > #define __BPF_FUNC_MAPPER(FN) \
> > FN(unspec), \
> > @@ -2853,7 +2875,8 @@ union bpf_attr {
> > FN(sk_storage_get), \
> > FN(sk_storage_delete), \
> > FN(send_signal), \
> > - FN(tcp_gen_syncookie),
> > + FN(tcp_gen_syncookie), \
> > + FN(get_current_pidns_info),
> >
> > /* integer value in 'imm' field of BPF_CALL instruction selects which helper
> > * function eBPF program intends to call
> > @@ -3604,4 +3627,10 @@ struct bpf_sockopt {
> > __s32 retval;
> > };
> >
> > +struct bpf_pidns_info {
> > + __u32 dev;
>
> Please add a comment for dev for how device major and minor number are
> derived. User space gets device major and minor number, they need to
> compare to the corresponding major/minor numbers returned by this helper.
>
> > + __u32 nsid;
> > + __u32 tgid;
> > + __u32 pid;
> > +};
> > #endif /* _UAPI__LINUX_BPF_H__ */
> > diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
> > index 8191a7db2777..3159f2a0188c 100644
> > --- a/kernel/bpf/core.c
> > +++ b/kernel/bpf/core.c
> > @@ -2038,6 +2038,7 @@ const struct bpf_func_proto bpf_get_current_uid_gid_proto __weak;
> > const struct bpf_func_proto bpf_get_current_comm_proto __weak;
> > const struct bpf_func_proto bpf_get_current_cgroup_id_proto __weak;
> > const struct bpf_func_proto bpf_get_local_storage_proto __weak;
> > +const struct bpf_func_proto bpf_get_current_pidns_info __weak;
> >
> > const struct bpf_func_proto * __weak bpf_get_trace_printk_proto(void)
> > {
> > diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
> > index 5e28718928ca..41fbf1f28a48 100644
> > --- a/kernel/bpf/helpers.c
> > +++ b/kernel/bpf/helpers.c
> > @@ -11,6 +11,12 @@
> > #include <linux/uidgid.h>
> > #include <linux/filter.h>
> > #include <linux/ctype.h>
> > +#include <linux/pid_namespace.h>
> > +#include <linux/major.h>
> > +#include <linux/stat.h>
> > +#include <linux/namei.h>
> > +#include <linux/version.h>
> > +
> >
> > #include "../../lib/kstrtox.h"
> >
> > @@ -312,6 +318,64 @@ void copy_map_value_locked(struct bpf_map *map, void *dst, void *src,
> > preempt_enable();
> > }
> >
> > +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *, pidns_info, u32,
> > + size)
> > +{
> > + const char *pidns_path = "/proc/self/ns/pid";
> > + struct pid_namespace *pidns = NULL;
> > + struct filename *tmp = NULL;
>
> tmp => fname
>
> > + struct inode *inode;
> > + struct path kp;
> > + pid_t tgid = 0;
> > + pid_t pid = 0;
> > + int ret;
> > + int len;
> > +
> > + if (unlikely(size != sizeof(struct bpf_pidns_info)))
> > + return -EINVAL;
>
> Please put an empty line. As a general rule for readability,
> put an empty line if control flow is interrupted, e.g., by
> "return", "break" or "continue". At least this is what
> I saw most in bpf mailing list.
>
> > + pidns = task_active_pid_ns(current);
> > + if (unlikely(!pidns))
> > + goto clear;
>
> An empty line. Also, there is nothing to clear.
> I prefer an error code -ENOENT.
>
> You can set
> ret = -EINVAL;
> here
>
> > + pidns_info->nsid = pidns->ns.inum;
> > + pid = task_pid_nr_ns(current, pidns);
> > + if (unlikely(!pid))
> > + goto clear;
>
> An empty line.
>
> > + tgid = task_tgid_nr_ns(current, pidns);
> > + if (unlikely(!tgid))
> > + goto clear;
>
> An empty line.
>
> > + pidns_info->tgid = (u32) tgid;
> > + pidns_info->pid = (u32) pid;
>
> Different functionality, an empty line.
>
> > + tmp = kmem_cache_alloc(names_cachep, GFP_ATOMIC);
> > + if (unlikely(!tmp)) {
> > + memset((void *)pidns_info, 0, (size_t) size);
> > + return -ENOMEM;
>
> ret = -ENOMEM;
> goto clear;
>
> > + }
>
> An empty line.
>
> > + len = strlen(pidns_path) + 1;
> > + memcpy((char *)tmp->name, pidns_path, len);
> > + tmp->uptr = NULL;
> > + tmp->aname = NULL;
> > + tmp->refcnt = 1;
> > + ret = filename_lookup(AT_FDCWD, tmp, 0, &kp, NULL);
> Adding below to free kmem cache memory
> kmem_cache_free(names_cachep, fname);
>
> In the above, we checked task_active_pid_ns().
> If not returning NULL, we have a valid pid ns. So the above
> filename_lookup should not go wrong. We can still keep
> the error checking though.
>
> > + if (ret) {
> > + memset((void *)pidns_info, 0, (size_t) size);
> > + return ret;
>
> goto clear;
>
> > + }
>
> An empty line.
>
> > + inode = d_backing_inode(kp.dentry);
> > + pidns_info->dev = inode->i_sb->s_dev;
> > + return 0;
>
> An empty line.
>
> > +clear > + memset((void *)pidns_info, 0, (size_t) size);
> > + return -EINVAL;
> > +}
> > +
> > +const struct bpf_func_proto bpf_get_current_pidns_info_proto = {
> > + .func = bpf_get_current_pidns_info,
> > + .gpl_only = false,
> > + .ret_type = RET_INTEGER,
> > + .arg1_type = ARG_PTR_TO_UNINIT_MEM,
> > + .arg2_type = ARG_CONST_SIZE,
> > +};
> > +
> > #ifdef CONFIG_CGROUPS
> > BPF_CALL_0(bpf_get_current_cgroup_id)
> > {
> > diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
> > index ca1255d14576..5e1dc22765a5 100644
> > --- a/kernel/trace/bpf_trace.c
> > +++ b/kernel/trace/bpf_trace.c
> > @@ -709,6 +709,8 @@ tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
> > #endif
> > case BPF_FUNC_send_signal:
> > return &bpf_send_signal_proto;
> > + case BPF_FUNC_get_current_pidns_info:
> > + return &bpf_get_current_pidns_info_proto;
> > default:
> > return NULL;
> > }
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-20 15:10 ` Carlos Antonio Neira Bustos
@ 2019-08-20 17:29 ` Yonghong Song
0 siblings, 0 replies; 17+ messages in thread
From: Yonghong Song @ 2019-08-20 17:29 UTC (permalink / raw)
To: Carlos Antonio Neira Bustos; +Cc: netdev, ebiederm, brouer, bpf
On 8/20/19 8:10 AM, Carlos Antonio Neira Bustos wrote:
> Hi Yonghong,
>
> Thanks for taking the time to review this.
>
>
>>> + *
>>> + * **-EINVAL** if *size_of_pidns* is not valid or unable to get ns, pid
>>> + * or tgid of the current task.
>>> + *
>>> + * **-ECHILD** if /proc/self/ns/pid does not exists.
>>> + *
>>> + * **-ENOTDIR** if /proc/self/ns does not exists.
>>
>> Let us remove ECHILD and ENOTDIR and replace it with ENOENT as I
>> described below.
>>
>> Please *do verify* what happens when namespaces or pid_ns are not
>> configured.
>>
>
>
> I have tested kernel configurations without namespace support and with
> namespace support but without pid namespaces, the helper returns -EINVAL
> on both cases, now it should return -ENOENT.
Indeed. -ENOENT is better.
>
>
>>> +struct bpf_pidns_info {
>>> + __u32 dev;
>>
>> Please add a comment for dev for how device major and minor number are
>> derived. User space gets device major and minor number, they need to
>> compare to the corresponding major/minor numbers returned by this helper.
>>
>>> + __u32 nsid;
>>> + __u32 tgid;
>>> + __u32 pid;
>>> +};
>>
>
> What do you think of this comment ?
>
> struct bpf_pidns_info {
> __u32 dev; /* major/minor numbers from /proc/self/ns/pid.
> * User space gets device major and minor numbers from
> * the same device that need to be compared against the
> * major/minor numbers returned by this helper.
> */
> __u32 nsid;
> __u32 tgid;
> __u32 pid;
> };
>
To be more specific, I like a comment similar to below in uapi bpf.h
struct bpf_cgroup_dev_ctx {
/* access_type encoded as (BPF_DEVCG_ACC_* << 16) |
BPF_DEVCG_DEV_* */
__u32 access_type;
__u32 major;
__u32 minor;
};
Some like:
/* dev encoded as (major << 8 | (minor & 0xff)) */
>>
>> Please put an empty line. As a general rule for readability,
>> put an empty line if control flow is interrupted, e.g., by
>> "return", "break" or "continue". At least this is what
>> I saw most in bpf mailing list.
>>
> I'll fix it in version 10.
>
>>> + len = strlen(pidns_path) + 1;
>>> + memcpy((char *)tmp->name, pidns_path, len);
>>> + tmp->uptr = NULL;
>>> + tmp->aname = NULL;
>>> + tmp->refcnt = 1;
>>> + ret = filename_lookup(AT_FDCWD, tmp, 0, &kp, NULL);
>> Adding below to free kmem cache memory
>> kmem_cache_free(names_cachep, fname);
>>
>
> I think we don't need to call kmem_cache_free as filename_lookup
> calls putname that calls kmem_cache_free.
Oh, right. Thanks for checking this.
>
>
> Thanks a lot for your help.
>
> Bests
>
>> In the above, we checked task_active_pid_ns().
>> If not returning NULL, we have a valid pid ns. So the above
>> filename_lookup should not go wrong. We can still keep
>> the error checking though.
>>
>>> + if (ret) {
>>> + memset((void *)pidns_info, 0, (size_t) size);
>>> + return ret;
>>
>>
>
> I think we could get rid of this.
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
[not found] ` <CACiB22jyN9=0ATWWE+x=BoWD6u+8KO+MvBfsFQmcNfkmANb2_w@mail.gmail.com>
@ 2019-08-28 20:39 ` Carlos Antonio Neira Bustos
2019-08-28 20:53 ` Yonghong Song
0 siblings, 1 reply; 17+ messages in thread
From: Carlos Antonio Neira Bustos @ 2019-08-28 20:39 UTC (permalink / raw)
To: Yonghong Song; +Cc: netdev, Eric Biederman, brouer, bpf
Yonghong,
Thanks for the pointer, I fixed this bug, but I found another one that's triggered
now the test program I included in tools/testing/selftests/bpf/test_pidns.
It's seemed that fname was not correctly setup when passing it to filename_lookup.
This is fixed now and I'm doing some more testing.
I think I'll remove the tests on samples/bpf as they are mostly end on -EPERM as
the fix intended.
Is ok to remove them and just focus to finish the self tests code?.
Bests
On Wed, Aug 14, 2019 at 01:25:06AM -0400, carlos antonio neira bustos wrote:
> Thank you very much!
>
> Bests
>
> El mié., 14 de ago. de 2019 00:50, Yonghong Song <yhs@fb.com> escribió:
>
> >
> >
> > On 8/13/19 5:56 PM, Carlos Antonio Neira Bustos wrote:
> > > On Tue, Aug 13, 2019 at 11:11:14PM +0000, Yonghong Song wrote:
> > >>
> > >>
> > >> On 8/13/19 11:47 AM, Carlos Neira wrote:
> > >>> From: Carlos <cneirabustos@gmail.com>
> > >>>
> > >>> New bpf helper bpf_get_current_pidns_info.
> > >>> This helper obtains the active namespace from current and returns
> > >>> pid, tgid, device and namespace id as seen from that namespace,
> > >>> allowing to instrument a process inside a container.
> > >>>
> > >>> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
> > >>> ---
> > >>> fs/internal.h | 2 --
> > >>> fs/namei.c | 1 -
> > >>> include/linux/bpf.h | 1 +
> > >>> include/linux/namei.h | 4 +++
> > >>> include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
> > >>> kernel/bpf/core.c | 1 +
> > >>> kernel/bpf/helpers.c | 64
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> > >>> kernel/trace/bpf_trace.c | 2 ++
> > >>> 8 files changed, 102 insertions(+), 4 deletions(-)
> > >>>
> > [...]
> > >>>
> > >>> +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *,
> > pidns_info, u32,
> > >>> + size)
> > >>> +{
> > >>> + const char *pidns_path = "/proc/self/ns/pid";
> > >>> + struct pid_namespace *pidns = NULL;
> > >>> + struct filename *tmp = NULL;
> > >>> + struct inode *inode;
> > >>> + struct path kp;
> > >>> + pid_t tgid = 0;
> > >>> + pid_t pid = 0;
> > >>> + int ret;
> > >>> + int len;
> > >>
> > >
> > > Thank you very much for catching this!.
> > > Could you share how to replicate this bug?.
> >
> > The config is attached. just run trace_ns_info and you
> > can reproduce the issue.
> >
> > >
> > >> I am running your sample program and get the following kernel bug:
> > >>
> > >> ...
> > >> [ 26.414825] BUG: sleeping function called from invalid context at
> > >> /data/users/yhs/work/net-next/fs
> > >> /dcache.c:843
> > >> [ 26.416314] in_atomic(): 1, irqs_disabled(): 0, pid: 1911, name: ping
> > >> [ 26.417189] CPU: 0 PID: 1911 Comm: ping Tainted: G W
> > >> 5.3.0-rc1+ #280
> > >> [ 26.418182] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
> > >> BIOS 1.9.3-1.el7.centos 04/01/2
> > >> 014
> > >> [ 26.419393] Call Trace:
> > >> [ 26.419697] <IRQ>
> > >> [ 26.419960] dump_stack+0x46/0x5b
> > >> [ 26.420434] ___might_sleep+0xe4/0x110
> > >> [ 26.420894] dput+0x2a/0x200
> > >> [ 26.421265] walk_component+0x10c/0x280
> > >> [ 26.421773] link_path_walk+0x327/0x560
> > >> [ 26.422280] ? proc_ns_dir_readdir+0x1a0/0x1a0
> > >> [ 26.422848] ? path_init+0x232/0x330
> > >> [ 26.423364] path_lookupat+0x88/0x200
> > >> [ 26.423808] ? selinux_parse_skb.constprop.69+0x124/0x430
> > >> [ 26.424521] filename_lookup+0xaf/0x190
> > >> [ 26.425031] ? simple_attr_release+0x20/0x20
> > >> [ 26.425560] bpf_get_current_pidns_info+0xfa/0x190
> > >> [ 26.426168] bpf_prog_83627154cefed596+0xe66/0x1000
> > >> [ 26.426779] trace_call_bpf+0xb5/0x160
> > >> [ 26.427317] ? __netif_receive_skb_core+0x1/0xbb0
> > >> [ 26.427929] ? __netif_receive_skb_core+0x1/0xbb0
> > >> [ 26.428496] kprobe_perf_func+0x4d/0x280
> > >> [ 26.428986] ? tracing_record_taskinfo_skip+0x1a/0x30
> > >> [ 26.429584] ? tracing_record_taskinfo+0xe/0x80
> > >> [ 26.430152] ? ttwu_do_wakeup.isra.114+0xcf/0xf0
> > >> [ 26.430737] ? __netif_receive_skb_core+0x1/0xbb0
> > >> [ 26.431334] ? __netif_receive_skb_core+0x5/0xbb0
> > >> [ 26.431930] kprobe_ftrace_handler+0x90/0xf0
> > >> [ 26.432495] ftrace_ops_assist_func+0x63/0x100
> > >> [ 26.433060] 0xffffffffc03180bf
> > >> [ 26.433471] ? __netif_receive_skb_core+0x1/0xbb0
> > >> ...
> > >>
> > >> To prevent we are running in arbitrary task (e.g., idle task)
> > >> context which may introduce sleeping issues, the following
> > >> probably appropriate:
> > >>
> > >> if (in_nmi() || in_softirq())
> > >> return -EPERM;
> > >>
> > >> Anyway, if in nmi or softirq, the namespace and pid/tgid
> > >> we get may be just accidentally associated with the bpf running
> > >> context, but it could be in a different context. So such info
> > >> is not reliable any way.
> > >>
> > >>> +
> > >>> + if (unlikely(size != sizeof(struct bpf_pidns_info)))
> > >>> + return -EINVAL;
> > >>> + pidns = task_active_pid_ns(current);
> > [...]
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-28 20:39 ` Carlos Antonio Neira Bustos
@ 2019-08-28 20:53 ` Yonghong Song
2019-08-28 21:03 ` Carlos Antonio Neira Bustos
0 siblings, 1 reply; 17+ messages in thread
From: Yonghong Song @ 2019-08-28 20:53 UTC (permalink / raw)
To: Carlos Antonio Neira Bustos; +Cc: netdev, Eric Biederman, brouer, bpf
On 8/28/19 1:39 PM, Carlos Antonio Neira Bustos wrote:
> Yonghong,
>
> Thanks for the pointer, I fixed this bug, but I found another one that's triggered
> now the test program I included in tools/testing/selftests/bpf/test_pidns.
> It's seemed that fname was not correctly setup when passing it to filename_lookup.
> This is fixed now and I'm doing some more testing.
> I think I'll remove the tests on samples/bpf as they are mostly end on -EPERM as
> the fix intended.
> Is ok to remove them and just focus to finish the self tests code?.
Yes, the samples/bpf test case can be removed.
Could you create a selftest with tracpoint net/netif_receive_skb, which
also uses the proposed helper? net/netif_receive_skb will happen in
interrupt context and it should catch the issue as well if
filename_lookup still get called in interrupt context.
>
> Bests
>
> On Wed, Aug 14, 2019 at 01:25:06AM -0400, carlos antonio neira bustos wrote:
>> Thank you very much!
>>
>> Bests
>>
>> El mié., 14 de ago. de 2019 00:50, Yonghong Song <yhs@fb.com> escribió:
>>
>>>
>>>
>>> On 8/13/19 5:56 PM, Carlos Antonio Neira Bustos wrote:
>>>> On Tue, Aug 13, 2019 at 11:11:14PM +0000, Yonghong Song wrote:
>>>>>
>>>>>
>>>>> On 8/13/19 11:47 AM, Carlos Neira wrote:
>>>>>> From: Carlos <cneirabustos@gmail.com>
>>>>>>
>>>>>> New bpf helper bpf_get_current_pidns_info.
>>>>>> This helper obtains the active namespace from current and returns
>>>>>> pid, tgid, device and namespace id as seen from that namespace,
>>>>>> allowing to instrument a process inside a container.
>>>>>>
>>>>>> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
>>>>>> ---
>>>>>> fs/internal.h | 2 --
>>>>>> fs/namei.c | 1 -
>>>>>> include/linux/bpf.h | 1 +
>>>>>> include/linux/namei.h | 4 +++
>>>>>> include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
>>>>>> kernel/bpf/core.c | 1 +
>>>>>> kernel/bpf/helpers.c | 64
>>> ++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> kernel/trace/bpf_trace.c | 2 ++
>>>>>> 8 files changed, 102 insertions(+), 4 deletions(-)
>>>>>>
>>> [...]
>>>>>>
>>>>>> +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *,
>>> pidns_info, u32,
>>>>>> + size)
>>>>>> +{
>>>>>> + const char *pidns_path = "/proc/self/ns/pid";
>>>>>> + struct pid_namespace *pidns = NULL;
>>>>>> + struct filename *tmp = NULL;
>>>>>> + struct inode *inode;
>>>>>> + struct path kp;
>>>>>> + pid_t tgid = 0;
>>>>>> + pid_t pid = 0;
>>>>>> + int ret;
>>>>>> + int len;
>>>>>
>>>>
>>>> Thank you very much for catching this!.
>>>> Could you share how to replicate this bug?.
>>>
>>> The config is attached. just run trace_ns_info and you
>>> can reproduce the issue.
>>>
>>>>
>>>>> I am running your sample program and get the following kernel bug:
>>>>>
>>>>> ...
>>>>> [ 26.414825] BUG: sleeping function called from invalid context at
>>>>> /data/users/yhs/work/net-next/fs
>>>>> /dcache.c:843
>>>>> [ 26.416314] in_atomic(): 1, irqs_disabled(): 0, pid: 1911, name: ping
>>>>> [ 26.417189] CPU: 0 PID: 1911 Comm: ping Tainted: G W
>>>>> 5.3.0-rc1+ #280
>>>>> [ 26.418182] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
>>>>> BIOS 1.9.3-1.el7.centos 04/01/2
>>>>> 014
>>>>> [ 26.419393] Call Trace:
>>>>> [ 26.419697] <IRQ>
>>>>> [ 26.419960] dump_stack+0x46/0x5b
>>>>> [ 26.420434] ___might_sleep+0xe4/0x110
>>>>> [ 26.420894] dput+0x2a/0x200
>>>>> [ 26.421265] walk_component+0x10c/0x280
>>>>> [ 26.421773] link_path_walk+0x327/0x560
>>>>> [ 26.422280] ? proc_ns_dir_readdir+0x1a0/0x1a0
>>>>> [ 26.422848] ? path_init+0x232/0x330
>>>>> [ 26.423364] path_lookupat+0x88/0x200
>>>>> [ 26.423808] ? selinux_parse_skb.constprop.69+0x124/0x430
>>>>> [ 26.424521] filename_lookup+0xaf/0x190
>>>>> [ 26.425031] ? simple_attr_release+0x20/0x20
>>>>> [ 26.425560] bpf_get_current_pidns_info+0xfa/0x190
>>>>> [ 26.426168] bpf_prog_83627154cefed596+0xe66/0x1000
>>>>> [ 26.426779] trace_call_bpf+0xb5/0x160
>>>>> [ 26.427317] ? __netif_receive_skb_core+0x1/0xbb0
>>>>> [ 26.427929] ? __netif_receive_skb_core+0x1/0xbb0
>>>>> [ 26.428496] kprobe_perf_func+0x4d/0x280
>>>>> [ 26.428986] ? tracing_record_taskinfo_skip+0x1a/0x30
>>>>> [ 26.429584] ? tracing_record_taskinfo+0xe/0x80
>>>>> [ 26.430152] ? ttwu_do_wakeup.isra.114+0xcf/0xf0
>>>>> [ 26.430737] ? __netif_receive_skb_core+0x1/0xbb0
>>>>> [ 26.431334] ? __netif_receive_skb_core+0x5/0xbb0
>>>>> [ 26.431930] kprobe_ftrace_handler+0x90/0xf0
>>>>> [ 26.432495] ftrace_ops_assist_func+0x63/0x100
>>>>> [ 26.433060] 0xffffffffc03180bf
>>>>> [ 26.433471] ? __netif_receive_skb_core+0x1/0xbb0
>>>>> ...
>>>>>
>>>>> To prevent we are running in arbitrary task (e.g., idle task)
>>>>> context which may introduce sleeping issues, the following
>>>>> probably appropriate:
>>>>>
>>>>> if (in_nmi() || in_softirq())
>>>>> return -EPERM;
>>>>>
>>>>> Anyway, if in nmi or softirq, the namespace and pid/tgid
>>>>> we get may be just accidentally associated with the bpf running
>>>>> context, but it could be in a different context. So such info
>>>>> is not reliable any way.
>>>>>
>>>>>> +
>>>>>> + if (unlikely(size != sizeof(struct bpf_pidns_info)))
>>>>>> + return -EINVAL;
>>>>>> + pidns = task_active_pid_ns(current);
>>> [...]
>>>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-28 20:53 ` Yonghong Song
@ 2019-08-28 21:03 ` Carlos Antonio Neira Bustos
2019-09-03 18:45 ` Carlos Antonio Neira Bustos
0 siblings, 1 reply; 17+ messages in thread
From: Carlos Antonio Neira Bustos @ 2019-08-28 21:03 UTC (permalink / raw)
To: Yonghong Song; +Cc: netdev, Eric Biederman, brouer, bpf
Thanks, I'll work on the net/netif_receive_skb selftest using this helper.
I hope I could complete this work this week.
Bests.
On Wed, Aug 28, 2019 at 08:53:25PM +0000, Yonghong Song wrote:
>
>
> On 8/28/19 1:39 PM, Carlos Antonio Neira Bustos wrote:
> > Yonghong,
> >
> > Thanks for the pointer, I fixed this bug, but I found another one that's triggered
> > now the test program I included in tools/testing/selftests/bpf/test_pidns.
> > It's seemed that fname was not correctly setup when passing it to filename_lookup.
> > This is fixed now and I'm doing some more testing.
> > I think I'll remove the tests on samples/bpf as they are mostly end on -EPERM as
> > the fix intended.
> > Is ok to remove them and just focus to finish the self tests code?.
>
> Yes, the samples/bpf test case can be removed.
> Could you create a selftest with tracpoint net/netif_receive_skb, which
> also uses the proposed helper? net/netif_receive_skb will happen in
> interrupt context and it should catch the issue as well if
> filename_lookup still get called in interrupt context.
>
> >
> > Bests
> >
> > On Wed, Aug 14, 2019 at 01:25:06AM -0400, carlos antonio neira bustos wrote:
> >> Thank you very much!
> >>
> >> Bests
> >>
> >> El mié., 14 de ago. de 2019 00:50, Yonghong Song <yhs@fb.com> escribió:
> >>
> >>>
> >>>
> >>> On 8/13/19 5:56 PM, Carlos Antonio Neira Bustos wrote:
> >>>> On Tue, Aug 13, 2019 at 11:11:14PM +0000, Yonghong Song wrote:
> >>>>>
> >>>>>
> >>>>> On 8/13/19 11:47 AM, Carlos Neira wrote:
> >>>>>> From: Carlos <cneirabustos@gmail.com>
> >>>>>>
> >>>>>> New bpf helper bpf_get_current_pidns_info.
> >>>>>> This helper obtains the active namespace from current and returns
> >>>>>> pid, tgid, device and namespace id as seen from that namespace,
> >>>>>> allowing to instrument a process inside a container.
> >>>>>>
> >>>>>> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
> >>>>>> ---
> >>>>>> fs/internal.h | 2 --
> >>>>>> fs/namei.c | 1 -
> >>>>>> include/linux/bpf.h | 1 +
> >>>>>> include/linux/namei.h | 4 +++
> >>>>>> include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
> >>>>>> kernel/bpf/core.c | 1 +
> >>>>>> kernel/bpf/helpers.c | 64
> >>> ++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>>> kernel/trace/bpf_trace.c | 2 ++
> >>>>>> 8 files changed, 102 insertions(+), 4 deletions(-)
> >>>>>>
> >>> [...]
> >>>>>>
> >>>>>> +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *,
> >>> pidns_info, u32,
> >>>>>> + size)
> >>>>>> +{
> >>>>>> + const char *pidns_path = "/proc/self/ns/pid";
> >>>>>> + struct pid_namespace *pidns = NULL;
> >>>>>> + struct filename *tmp = NULL;
> >>>>>> + struct inode *inode;
> >>>>>> + struct path kp;
> >>>>>> + pid_t tgid = 0;
> >>>>>> + pid_t pid = 0;
> >>>>>> + int ret;
> >>>>>> + int len;
> >>>>>
> >>>>
> >>>> Thank you very much for catching this!.
> >>>> Could you share how to replicate this bug?.
> >>>
> >>> The config is attached. just run trace_ns_info and you
> >>> can reproduce the issue.
> >>>
> >>>>
> >>>>> I am running your sample program and get the following kernel bug:
> >>>>>
> >>>>> ...
> >>>>> [ 26.414825] BUG: sleeping function called from invalid context at
> >>>>> /data/users/yhs/work/net-next/fs
> >>>>> /dcache.c:843
> >>>>> [ 26.416314] in_atomic(): 1, irqs_disabled(): 0, pid: 1911, name: ping
> >>>>> [ 26.417189] CPU: 0 PID: 1911 Comm: ping Tainted: G W
> >>>>> 5.3.0-rc1+ #280
> >>>>> [ 26.418182] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
> >>>>> BIOS 1.9.3-1.el7.centos 04/01/2
> >>>>> 014
> >>>>> [ 26.419393] Call Trace:
> >>>>> [ 26.419697] <IRQ>
> >>>>> [ 26.419960] dump_stack+0x46/0x5b
> >>>>> [ 26.420434] ___might_sleep+0xe4/0x110
> >>>>> [ 26.420894] dput+0x2a/0x200
> >>>>> [ 26.421265] walk_component+0x10c/0x280
> >>>>> [ 26.421773] link_path_walk+0x327/0x560
> >>>>> [ 26.422280] ? proc_ns_dir_readdir+0x1a0/0x1a0
> >>>>> [ 26.422848] ? path_init+0x232/0x330
> >>>>> [ 26.423364] path_lookupat+0x88/0x200
> >>>>> [ 26.423808] ? selinux_parse_skb.constprop.69+0x124/0x430
> >>>>> [ 26.424521] filename_lookup+0xaf/0x190
> >>>>> [ 26.425031] ? simple_attr_release+0x20/0x20
> >>>>> [ 26.425560] bpf_get_current_pidns_info+0xfa/0x190
> >>>>> [ 26.426168] bpf_prog_83627154cefed596+0xe66/0x1000
> >>>>> [ 26.426779] trace_call_bpf+0xb5/0x160
> >>>>> [ 26.427317] ? __netif_receive_skb_core+0x1/0xbb0
> >>>>> [ 26.427929] ? __netif_receive_skb_core+0x1/0xbb0
> >>>>> [ 26.428496] kprobe_perf_func+0x4d/0x280
> >>>>> [ 26.428986] ? tracing_record_taskinfo_skip+0x1a/0x30
> >>>>> [ 26.429584] ? tracing_record_taskinfo+0xe/0x80
> >>>>> [ 26.430152] ? ttwu_do_wakeup.isra.114+0xcf/0xf0
> >>>>> [ 26.430737] ? __netif_receive_skb_core+0x1/0xbb0
> >>>>> [ 26.431334] ? __netif_receive_skb_core+0x5/0xbb0
> >>>>> [ 26.431930] kprobe_ftrace_handler+0x90/0xf0
> >>>>> [ 26.432495] ftrace_ops_assist_func+0x63/0x100
> >>>>> [ 26.433060] 0xffffffffc03180bf
> >>>>> [ 26.433471] ? __netif_receive_skb_core+0x1/0xbb0
> >>>>> ...
> >>>>>
> >>>>> To prevent we are running in arbitrary task (e.g., idle task)
> >>>>> context which may introduce sleeping issues, the following
> >>>>> probably appropriate:
> >>>>>
> >>>>> if (in_nmi() || in_softirq())
> >>>>> return -EPERM;
> >>>>>
> >>>>> Anyway, if in nmi or softirq, the namespace and pid/tgid
> >>>>> we get may be just accidentally associated with the bpf running
> >>>>> context, but it could be in a different context. So such info
> >>>>> is not reliable any way.
> >>>>>
> >>>>>> +
> >>>>>> + if (unlikely(size != sizeof(struct bpf_pidns_info)))
> >>>>>> + return -EINVAL;
> >>>>>> + pidns = task_active_pid_ns(current);
> >>> [...]
> >>>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-08-28 21:03 ` Carlos Antonio Neira Bustos
@ 2019-09-03 18:45 ` Carlos Antonio Neira Bustos
2019-09-03 20:36 ` Yonghong Song
0 siblings, 1 reply; 17+ messages in thread
From: Carlos Antonio Neira Bustos @ 2019-09-03 18:45 UTC (permalink / raw)
To: Yonghong Song; +Cc: netdev, Eric Biederman, brouer, bpf
Hi Yonghong,
> > Yes, the samples/bpf test case can be removed.
> > Could you create a selftest with tracpoint net/netif_receive_skb, which
> > also uses the proposed helper? net/netif_receive_skb will happen in
> > interrupt context and it should catch the issue as well if
> > filename_lookup still get called in interrupt context.
>
For this one scenario I just created another selftest with the only difference
that the tracepoint is /net/netif_receive_skb so this fails with -EPERM.
Is that enough?.
I have made this comment on include/uapi/linux/bpf.h, maybe is too terse?
struct bpf_pidns_info {
__u32 dev; /* dev_t from /proc/self/ns/pid inode */
__u32 nsid;
__u32 tgid;
__u32 pid;
};
I'm only missing clearing out those questions to be ready to submit v11 of this patch.
Bests
On Wed, Aug 28, 2019 at 05:03:35PM -0400, Carlos Antonio Neira Bustos wrote:
> Thanks, I'll work on the net/netif_receive_skb selftest using this helper.
> I hope I could complete this work this week.
>
> Bests.
>
> On Wed, Aug 28, 2019 at 08:53:25PM +0000, Yonghong Song wrote:
> >
> >
> > On 8/28/19 1:39 PM, Carlos Antonio Neira Bustos wrote:
> > > Yonghong,
> > >
> > > Thanks for the pointer, I fixed this bug, but I found another one that's triggered
> > > now the test program I included in tools/testing/selftests/bpf/test_pidns.
> > > It's seemed that fname was not correctly setup when passing it to filename_lookup.
> > > This is fixed now and I'm doing some more testing.
> > > I think I'll remove the tests on samples/bpf as they are mostly end on -EPERM as
> > > the fix intended.
> > > Is ok to remove them and just focus to finish the self tests code?.
> >
> > Yes, the samples/bpf test case can be removed.
> > Could you create a selftest with tracpoint net/netif_receive_skb, which
> > also uses the proposed helper? net/netif_receive_skb will happen in
> > interrupt context and it should catch the issue as well if
> > filename_lookup still get called in interrupt context.
> >
> > >
> > > Bests
> > >
> > > On Wed, Aug 14, 2019 at 01:25:06AM -0400, carlos antonio neira bustos wrote:
> > >> Thank you very much!
> > >>
> > >> Bests
> > >>
> > >> El mié., 14 de ago. de 2019 00:50, Yonghong Song <yhs@fb.com> escribió:
> > >>
> > >>>
> > >>>
> > >>> On 8/13/19 5:56 PM, Carlos Antonio Neira Bustos wrote:
> > >>>> On Tue, Aug 13, 2019 at 11:11:14PM +0000, Yonghong Song wrote:
> > >>>>>
> > >>>>>
> > >>>>> On 8/13/19 11:47 AM, Carlos Neira wrote:
> > >>>>>> From: Carlos <cneirabustos@gmail.com>
> > >>>>>>
> > >>>>>> New bpf helper bpf_get_current_pidns_info.
> > >>>>>> This helper obtains the active namespace from current and returns
> > >>>>>> pid, tgid, device and namespace id as seen from that namespace,
> > >>>>>> allowing to instrument a process inside a container.
> > >>>>>>
> > >>>>>> Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
> > >>>>>> ---
> > >>>>>> fs/internal.h | 2 --
> > >>>>>> fs/namei.c | 1 -
> > >>>>>> include/linux/bpf.h | 1 +
> > >>>>>> include/linux/namei.h | 4 +++
> > >>>>>> include/uapi/linux/bpf.h | 31 ++++++++++++++++++++++-
> > >>>>>> kernel/bpf/core.c | 1 +
> > >>>>>> kernel/bpf/helpers.c | 64
> > >>> ++++++++++++++++++++++++++++++++++++++++++++++++
> > >>>>>> kernel/trace/bpf_trace.c | 2 ++
> > >>>>>> 8 files changed, 102 insertions(+), 4 deletions(-)
> > >>>>>>
> > >>> [...]
> > >>>>>>
> > >>>>>> +BPF_CALL_2(bpf_get_current_pidns_info, struct bpf_pidns_info *,
> > >>> pidns_info, u32,
> > >>>>>> + size)
> > >>>>>> +{
> > >>>>>> + const char *pidns_path = "/proc/self/ns/pid";
> > >>>>>> + struct pid_namespace *pidns = NULL;
> > >>>>>> + struct filename *tmp = NULL;
> > >>>>>> + struct inode *inode;
> > >>>>>> + struct path kp;
> > >>>>>> + pid_t tgid = 0;
> > >>>>>> + pid_t pid = 0;
> > >>>>>> + int ret;
> > >>>>>> + int len;
> > >>>>>
> > >>>>
> > >>>> Thank you very much for catching this!.
> > >>>> Could you share how to replicate this bug?.
> > >>>
> > >>> The config is attached. just run trace_ns_info and you
> > >>> can reproduce the issue.
> > >>>
> > >>>>
> > >>>>> I am running your sample program and get the following kernel bug:
> > >>>>>
> > >>>>> ...
> > >>>>> [ 26.414825] BUG: sleeping function called from invalid context at
> > >>>>> /data/users/yhs/work/net-next/fs
> > >>>>> /dcache.c:843
> > >>>>> [ 26.416314] in_atomic(): 1, irqs_disabled(): 0, pid: 1911, name: ping
> > >>>>> [ 26.417189] CPU: 0 PID: 1911 Comm: ping Tainted: G W
> > >>>>> 5.3.0-rc1+ #280
> > >>>>> [ 26.418182] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
> > >>>>> BIOS 1.9.3-1.el7.centos 04/01/2
> > >>>>> 014
> > >>>>> [ 26.419393] Call Trace:
> > >>>>> [ 26.419697] <IRQ>
> > >>>>> [ 26.419960] dump_stack+0x46/0x5b
> > >>>>> [ 26.420434] ___might_sleep+0xe4/0x110
> > >>>>> [ 26.420894] dput+0x2a/0x200
> > >>>>> [ 26.421265] walk_component+0x10c/0x280
> > >>>>> [ 26.421773] link_path_walk+0x327/0x560
> > >>>>> [ 26.422280] ? proc_ns_dir_readdir+0x1a0/0x1a0
> > >>>>> [ 26.422848] ? path_init+0x232/0x330
> > >>>>> [ 26.423364] path_lookupat+0x88/0x200
> > >>>>> [ 26.423808] ? selinux_parse_skb.constprop.69+0x124/0x430
> > >>>>> [ 26.424521] filename_lookup+0xaf/0x190
> > >>>>> [ 26.425031] ? simple_attr_release+0x20/0x20
> > >>>>> [ 26.425560] bpf_get_current_pidns_info+0xfa/0x190
> > >>>>> [ 26.426168] bpf_prog_83627154cefed596+0xe66/0x1000
> > >>>>> [ 26.426779] trace_call_bpf+0xb5/0x160
> > >>>>> [ 26.427317] ? __netif_receive_skb_core+0x1/0xbb0
> > >>>>> [ 26.427929] ? __netif_receive_skb_core+0x1/0xbb0
> > >>>>> [ 26.428496] kprobe_perf_func+0x4d/0x280
> > >>>>> [ 26.428986] ? tracing_record_taskinfo_skip+0x1a/0x30
> > >>>>> [ 26.429584] ? tracing_record_taskinfo+0xe/0x80
> > >>>>> [ 26.430152] ? ttwu_do_wakeup.isra.114+0xcf/0xf0
> > >>>>> [ 26.430737] ? __netif_receive_skb_core+0x1/0xbb0
> > >>>>> [ 26.431334] ? __netif_receive_skb_core+0x5/0xbb0
> > >>>>> [ 26.431930] kprobe_ftrace_handler+0x90/0xf0
> > >>>>> [ 26.432495] ftrace_ops_assist_func+0x63/0x100
> > >>>>> [ 26.433060] 0xffffffffc03180bf
> > >>>>> [ 26.433471] ? __netif_receive_skb_core+0x1/0xbb0
> > >>>>> ...
> > >>>>>
> > >>>>> To prevent we are running in arbitrary task (e.g., idle task)
> > >>>>> context which may introduce sleeping issues, the following
> > >>>>> probably appropriate:
> > >>>>>
> > >>>>> if (in_nmi() || in_softirq())
> > >>>>> return -EPERM;
> > >>>>>
> > >>>>> Anyway, if in nmi or softirq, the namespace and pid/tgid
> > >>>>> we get may be just accidentally associated with the bpf running
> > >>>>> context, but it could be in a different context. So such info
> > >>>>> is not reliable any way.
> > >>>>>
> > >>>>>> +
> > >>>>>> + if (unlikely(size != sizeof(struct bpf_pidns_info)))
> > >>>>>> + return -EINVAL;
> > >>>>>> + pidns = task_active_pid_ns(current);
> > >>> [...]
> > >>>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH bpf-next V9 1/3] bpf: new helper to obtain namespace data from current task
2019-09-03 18:45 ` Carlos Antonio Neira Bustos
@ 2019-09-03 20:36 ` Yonghong Song
0 siblings, 0 replies; 17+ messages in thread
From: Yonghong Song @ 2019-09-03 20:36 UTC (permalink / raw)
To: Carlos Antonio Neira Bustos; +Cc: netdev, Eric Biederman, brouer, bpf
On 9/3/19 11:45 AM, Carlos Antonio Neira Bustos wrote:
> Hi Yonghong,
>
>>> Yes, the samples/bpf test case can be removed.
>>> Could you create a selftest with tracpoint net/netif_receive_skb, which
>>> also uses the proposed helper? net/netif_receive_skb will happen in
>>> interrupt context and it should catch the issue as well if
>>> filename_lookup still get called in interrupt context.
>>
> For this one scenario I just created another selftest with the only difference
> that the tracepoint is /net/netif_receive_skb so this fails with -EPERM.
> Is that enough?.
This should be fine.
>
> I have made this comment on include/uapi/linux/bpf.h, maybe is too terse?
>
> struct bpf_pidns_info {
> __u32 dev; /* dev_t from /proc/self/ns/pid inode */
> __u32 nsid;
> __u32 tgid;
> __u32 pid;
> };
Let us keep the above for now. I may have further comments based on
your test code which uses "dev".
>
> I'm only missing clearing out those questions to be ready to submit v11 of this patch.
Please go ahead to submit the new version.
Thanks.
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2019-09-03 20:37 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-13 18:47 [PATCH bpf-next V9 0/3] BPF: New helper to obtain namespace data from current task Carlos Neira
2019-08-13 18:47 ` [PATCH bpf-next V9 1/3] bpf: new " Carlos Neira
2019-08-13 22:35 ` Yonghong Song
2019-08-20 15:10 ` Carlos Antonio Neira Bustos
2019-08-20 17:29 ` Yonghong Song
2019-08-13 23:11 ` Yonghong Song
2019-08-13 23:51 ` [Potential Spoof] " Yonghong Song
2019-08-14 0:56 ` Carlos Antonio Neira Bustos
2019-08-14 4:50 ` Yonghong Song
[not found] ` <CACiB22jyN9=0ATWWE+x=BoWD6u+8KO+MvBfsFQmcNfkmANb2_w@mail.gmail.com>
2019-08-28 20:39 ` Carlos Antonio Neira Bustos
2019-08-28 20:53 ` Yonghong Song
2019-08-28 21:03 ` Carlos Antonio Neira Bustos
2019-09-03 18:45 ` Carlos Antonio Neira Bustos
2019-09-03 20:36 ` Yonghong Song
2019-08-13 18:47 ` [PATCH bpf-next V9 2/3] samples/bpf: added sample code for bpf_get_current_pidns_info Carlos Neira
2019-08-13 18:47 ` [PATCH bpf-next V9 3/3] tools/testing/selftests/bpf: Add self-tests for new helper Carlos Neira
2019-08-13 23:19 ` Yonghong Song
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).