[PATCH 1/6] net: stmmac: return error if no DMA configuration is found

[PATCH 1/6] net: stmmac: return error if no DMA configuration is found

[Niklas Cassel]

From: Niklas Cassel <niklas.cassel@axis.com>

All drivers except pci glue layer calls stmmac_probe_config_dt.
stmmac_probe_config_dt does a kzalloc dma_cfg.

pci glue layer does kzalloc dma_cfg explicitly, so all current
drivers does a kzalloc dma_cfg.

Return an error if no DMA configuration is found, that way
we can assume that the DMA configuration always exists.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1f9ec02fa7f8..04f88df7da49 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1577,16 +1577,12 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
  */
 static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 {
-	int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, aal = 0;
-	int mixed_burst = 0;
 	int atds = 0;
 	int ret = 0;
 
-	if (priv->plat->dma_cfg) {
-		pbl = priv->plat->dma_cfg->pbl;
-		fixed_burst = priv->plat->dma_cfg->fixed_burst;
-		mixed_burst = priv->plat->dma_cfg->mixed_burst;
-		aal = priv->plat->dma_cfg->aal;
+	if (!priv->plat->dma_cfg) {
+		dev_err(priv->device, "DMA configuration not found\n");
+		return -EINVAL;
 	}
 
 	if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
@@ -1598,8 +1594,12 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 		return ret;
 	}
 
-	priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
-			    aal, priv->dma_tx_phy, priv->dma_rx_phy, atds);
+	priv->hw->dma->init(priv->ioaddr,
+			    priv->plat->dma_cfg->pbl,
+			    priv->plat->dma_cfg->fixed_burst,
+			    priv->plat->dma_cfg->mixed_burst,
+			    priv->plat->dma_cfg->aal,
+			    priv->dma_tx_phy, priv->dma_rx_phy, atds);
 
 	if (priv->synopsys_id >= DWMAC_CORE_4_00) {
 		priv->rx_tail_addr = priv->dma_rx_phy +
-- 
2.1.4

[PATCH 2/6] net: stmmac: simplify the common DMA init API

[Niklas Cassel]

From: Niklas Cassel <niklas.cassel@axis.com>

Use struct stmmac_dma_cfg *dma_cfg as an argument rather
than using all the struct members as individual arguments.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
 drivers/net/ethernet/stmicro/stmmac/common.h        |  4 ++--
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 13 +++++++------
 drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c  |  7 ++++---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c    | 14 ++++++++------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c   |  6 +-----
 5 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 6d2de4e01f6d..3023ec7ae83e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -411,8 +411,8 @@ extern const struct stmmac_desc_ops ndesc_ops;
 struct stmmac_dma_ops {
 	/* DMA core initialization */
 	int (*reset)(void __iomem *ioaddr);
-	void (*init)(void __iomem *ioaddr, int pbl, int fb, int mb,
-		     int aal, u32 dma_tx, u32 dma_rx, int atds);
+	void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
+		     u32 dma_tx, u32 dma_rx, int atds);
 	/* Configure the AXI Bus Mode Register */
 	void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
 	/* Dump DMA registers */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 990746955216..01d0d0f315e5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -82,8 +82,9 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 	writel(value, ioaddr + DMA_AXI_BUS_MODE);
 }
 
-static void dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
-			       int aal, u32 dma_tx, u32 dma_rx, int atds)
+static void dwmac1000_dma_init(void __iomem *ioaddr,
+			       struct stmmac_dma_cfg *dma_cfg,
+			       u32 dma_tx, u32 dma_rx, int atds)
 {
 	u32 value = readl(ioaddr + DMA_BUS_MODE);
 
@@ -99,20 +100,20 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
 	 */
 	value |= DMA_BUS_MODE_MAXPBL;
 	value &= ~DMA_BUS_MODE_PBL_MASK;
-	value |= (pbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT);
 
 	/* Set the Fixed burst mode */
-	if (fb)
+	if (dma_cfg->fixed_burst)
 		value |= DMA_BUS_MODE_FB;
 
 	/* Mixed Burst has no effect when fb is set */
-	if (mb)
+	if (dma_cfg->mixed_burst)
 		value |= DMA_BUS_MODE_MB;
 
 	if (atds)
 		value |= DMA_BUS_MODE_ATDS;
 
-	if (aal)
+	if (dma_cfg->aal)
 		value |= DMA_BUS_MODE_AAL;
 
 	writel(value, ioaddr + DMA_BUS_MODE);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index 61f54c99a7de..e5664da382f3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -32,11 +32,12 @@
 #include "dwmac100.h"
 #include "dwmac_dma.h"
 
-static void dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
-			      int aal, u32 dma_tx, u32 dma_rx, int atds)
+static void dwmac100_dma_init(void __iomem *ioaddr,
+			      struct stmmac_dma_cfg *dma_cfg,
+			      u32 dma_tx, u32 dma_rx, int atds)
 {
 	/* Enable Application Access by writing to DMA CSR0 */
-	writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
+	writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT),
 	       ioaddr + DMA_BUS_MODE);
 
 	/* Mask interrupts by writing to CSR7 */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 577316de6ba8..0946546d6dcd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -97,27 +97,29 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl,
 	writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(channel));
 }
 
-static void dwmac4_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
-			    int aal, u32 dma_tx, u32 dma_rx, int atds)
+static void dwmac4_dma_init(void __iomem *ioaddr,
+			    struct stmmac_dma_cfg *dma_cfg,
+			    u32 dma_tx, u32 dma_rx, int atds)
 {
 	u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
 	int i;
 
 	/* Set the Fixed burst mode */
-	if (fb)
+	if (dma_cfg->fixed_burst)
 		value |= DMA_SYS_BUS_FB;
 
 	/* Mixed Burst has no effect when fb is set */
-	if (mb)
+	if (dma_cfg->mixed_burst)
 		value |= DMA_SYS_BUS_MB;
 
-	if (aal)
+	if (dma_cfg->aal)
 		value |= DMA_SYS_BUS_AAL;
 
 	writel(value, ioaddr + DMA_SYS_BUS_MODE);
 
 	for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
-		dwmac4_dma_init_channel(ioaddr, pbl, dma_tx, dma_rx, i);
+		dwmac4_dma_init_channel(ioaddr, dma_cfg->pbl,
+					dma_tx, dma_rx, i);
 }
 
 static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 04f88df7da49..27a03f7ee095 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1594,11 +1594,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 		return ret;
 	}
 
-	priv->hw->dma->init(priv->ioaddr,
-			    priv->plat->dma_cfg->pbl,
-			    priv->plat->dma_cfg->fixed_burst,
-			    priv->plat->dma_cfg->mixed_burst,
-			    priv->plat->dma_cfg->aal,
+	priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
 			    priv->dma_tx_phy, priv->dma_rx_phy, atds);
 
 	if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-- 
2.1.4

[PATCH 3/6] net: stmmac: stmmac_platform: fix parsing of DT binding

[Niklas Cassel]

From: Niklas Cassel <niklas.cassel@axis.com>

commit 64c3b252e9fc ("net: stmmac: fixed the pbl setting with DT")
changed the parsing of the DT binding.

Before 64c3b252e9fc, snps,fixed-burst and snps,mixed-burst were parsed
regardless if the property snps,pbl existed or not.
After the commit, fixed burst and mixed burst are only parsed if
snps,pbl exists. Now when snps,aal has been added, it too is only
parsed if snps,pbl exists.

Since the DT binding does not specify that fixed burst, mixed burst
or aal depend on snps,pbl being specified, undo changes introduced
by 64c3b252e9fc.

The issue commit 64c3b252e9fc ("net: stmmac: fixed the pbl setting with
DT") tries to address is solved in another way:
The databook specifies that all values other than
1, 2, 4, 8, 16, or 32 results in undefined behavior,
so snps,pbl = <0> is invalid.

If pbl is 0 after parsing, set pbl to DEFAULT_DMA_PBL.
This handles the case where the property is omitted, and also handles
the case where the property is specified without any data.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  3 +++
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  | 27 +++++++++++-----------
 2 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 27a03f7ee095..9ba2eb4c22fe 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1585,6 +1585,9 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 		return -EINVAL;
 	}
 
+	if (!priv->plat->dma_cfg->pbl)
+		priv->plat->dma_cfg->pbl = DEFAULT_DMA_PBL;
+
 	if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
 		atds = 1;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index b46c892c7079..05b8c33effd5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -303,21 +303,20 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 		plat->force_sf_dma_mode = 1;
 	}
 
-	if (of_find_property(np, "snps,pbl", NULL)) {
-		dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
-				       GFP_KERNEL);
-		if (!dma_cfg) {
-			of_node_put(plat->phy_node);
-			return ERR_PTR(-ENOMEM);
-		}
-		plat->dma_cfg = dma_cfg;
-		of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
-		dma_cfg->aal = of_property_read_bool(np, "snps,aal");
-		dma_cfg->fixed_burst =
-			of_property_read_bool(np, "snps,fixed-burst");
-		dma_cfg->mixed_burst =
-			of_property_read_bool(np, "snps,mixed-burst");
+	dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
+			       GFP_KERNEL);
+	if (!dma_cfg) {
+		of_node_put(plat->phy_node);
+		return ERR_PTR(-ENOMEM);
 	}
+	plat->dma_cfg = dma_cfg;
+
+	of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
+
+	dma_cfg->aal = of_property_read_bool(np, "snps,aal");
+	dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
+	dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
+
 	plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
 	if (plat->force_thresh_dma_mode) {
 		plat->force_sf_dma_mode = 0;
-- 
2.1.4

[PATCH 4/6] net: stmmac: dwmac1000: fix define DMA_BUS_MODE_RPBL_MASK

[Niklas Cassel]

From: Niklas Cassel <niklas.cassel@axis.com>

DMA_BUS_MODE_RPBL_MASK is really 6 bits,
just like DMA_BUS_MODE_PBL_MASK.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index ff3e5ab39bd0..52b9407a8a39 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -225,7 +225,7 @@ enum rx_tx_priority_ratio {
 
 #define DMA_BUS_MODE_FB		0x00010000	/* Fixed burst */
 #define DMA_BUS_MODE_MB		0x04000000	/* Mixed burst */
-#define DMA_BUS_MODE_RPBL_MASK	0x003e0000	/* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_MASK	0x007e0000	/* Rx-Programmable Burst Len */
 #define DMA_BUS_MODE_RPBL_SHIFT	17
 #define DMA_BUS_MODE_USP	0x00800000
 #define DMA_BUS_MODE_MAXPBL	0x01000000
-- 
2.1.4

[PATCH 5/6] net: stmmac: add support for independent DMA pbl for tx/rx

[Niklas Cassel]

From: Niklas Cassel <niklas.cassel@axis.com>

GMAC and newer supports independent programmable burst lengths for
DMA tx/rx. Add new optional devicetree properties representing this.

To be backwards compatible, snps,pbl will still be valid, but
snps,txpbl/snps,rxpbl will override the value in snps,pbl if set.

If the IP is synthesized to use the AXI interface, there is a register
and a matching DT property inside the optional stmmac-axi-config DT node
for controlling burst lengths, named snps,blen.
However, using this register, it is not possible to control tx and rx
independently. Also, this register is not available if the IP was
synthesized with, e.g., the AHB interface.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
 Documentation/devicetree/bindings/net/stmmac.txt      |  6 +++++-
 Documentation/networking/stmmac.txt                   | 19 +++++++++++++------
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c   | 12 ++++++------
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c      | 12 +++++++-----
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c |  2 ++
 include/linux/stmmac.h                                |  2 ++
 6 files changed, 35 insertions(+), 18 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index b95ff998ba73..8080038ff1b2 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -34,7 +34,11 @@ Optional properties:
   platforms.
 - tx-fifo-depth: See ethernet.txt file in the same directory
 - rx-fifo-depth: See ethernet.txt file in the same directory
-- snps,pbl		Programmable Burst Length
+- snps,pbl		Programmable Burst Length (tx and rx)
+- snps,txpbl		Tx Programmable Burst Length. Only for GMAC and newer.
+			If set, DMA tx will use this value rather than snps,pbl.
+- snps,rxpbl		Rx Programmable Burst Length. Only for GMAC and newer.
+			If set, DMA rx will use this value rather than snps,pbl.
 - snps,aal		Address-Aligned Beats
 - snps,fixed-burst	Program the DMA to use the fixed burst mode
 - snps,mixed-burst	Program the DMA to use the mixed burst mode
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index e226f8925c9e..82c8e496b4bb 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -154,7 +154,8 @@ Where:
    o pbl: the Programmable Burst Length is maximum number of beats to
        be transferred in one DMA transaction.
        GMAC also enables the 4xPBL by default.
-   o fixed_burst/mixed_burst/burst_len
+   o txpbl/rxpbl: GMAC and newer supports independent DMA pbl for tx/rx.
+   o fixed_burst/mixed_burst/aal
  o clk_csr: fixed CSR Clock range selection.
  o has_gmac: uses the GMAC core.
  o enh_desc: if sets the MAC will use the enhanced descriptor structure.
@@ -206,16 +207,22 @@ tuned according to the HW capabilities.
 
 struct stmmac_dma_cfg {
 	int pbl;
+	int txpbl;
+	int rxpbl;
 	int fixed_burst;
-	int burst_len_supported;
+	int mixed_burst;
+	bool aal;
 };
 
 Where:
- o pbl: Programmable Burst Length
+ o pbl: Programmable Burst Length (tx and rx)
+ o txpbl: Transmit Programmable Burst Length. Only for GMAC and newer.
+	 If set, DMA tx will use this value rather than pbl.
+ o rxpbl: Receive Programmable Burst Length. Only for GMAC and newer.
+	 If set, DMA rx will use this value rather than pbl.
  o fixed_burst: program the DMA to use the fixed burst mode
- o burst_len: this is the value we put in the register
-	      supported values are provided as macros in
-	      linux/stmmac.h header file.
+ o mixed_burst: program the DMA to use the mixed burst mode
+ o aal: Address-Aligned Beats
 
 ---
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 01d0d0f315e5..1dd34fb4c1a9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -87,20 +87,20 @@ static void dwmac1000_dma_init(void __iomem *ioaddr,
 			       u32 dma_tx, u32 dma_rx, int atds)
 {
 	u32 value = readl(ioaddr + DMA_BUS_MODE);
+	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
 
 	/*
 	 * Set the DMA PBL (Programmable Burst Length) mode.
 	 *
 	 * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
 	 * post 3.5 mode bit acts as 8*PBL.
-	 *
-	 * This configuration doesn't take care about the Separate PBL
-	 * so only the bits: 13-8 are programmed with the PBL passed from the
-	 * platform.
 	 */
 	value |= DMA_BUS_MODE_MAXPBL;
-	value &= ~DMA_BUS_MODE_PBL_MASK;
-	value |= (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= DMA_BUS_MODE_USP;
+	value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
+	value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
 
 	/* Set the Fixed burst mode */
 	if (dma_cfg->fixed_burst)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 0946546d6dcd..0bf47825bfeb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -69,11 +69,14 @@ static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 	writel(value, ioaddr + DMA_SYS_BUS_MODE);
 }
 
-static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl,
+static void dwmac4_dma_init_channel(void __iomem *ioaddr,
+				    struct stmmac_dma_cfg *dma_cfg,
 				    u32 dma_tx_phy, u32 dma_rx_phy,
 				    u32 channel)
 {
 	u32 value;
+	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
 
 	/* set PBL for each channels. Currently we affect same configuration
 	 * on each channel
@@ -83,11 +86,11 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl,
 	writel(value, ioaddr + DMA_CHAN_CONTROL(channel));
 
 	value = readl(ioaddr + DMA_CHAN_TX_CONTROL(channel));
-	value = value | (pbl << DMA_BUS_MODE_PBL_SHIFT);
+	value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
 	writel(value, ioaddr + DMA_CHAN_TX_CONTROL(channel));
 
 	value = readl(ioaddr + DMA_CHAN_RX_CONTROL(channel));
-	value = value | (pbl << DMA_BUS_MODE_RPBL_SHIFT);
+	value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
 	writel(value, ioaddr + DMA_CHAN_RX_CONTROL(channel));
 
 	/* Mask interrupts by writing to CSR7 */
@@ -118,8 +121,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
 	writel(value, ioaddr + DMA_SYS_BUS_MODE);
 
 	for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
-		dwmac4_dma_init_channel(ioaddr, dma_cfg->pbl,
-					dma_tx, dma_rx, i);
+		dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i);
 }
 
 static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 05b8c33effd5..29faff42a5ea 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -312,6 +312,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	plat->dma_cfg = dma_cfg;
 
 	of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
+	of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl);
+	of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl);
 
 	dma_cfg->aal = of_property_read_bool(np, "snps,aal");
 	dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 705840e0438f..c8a7c6b278da 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -88,6 +88,8 @@ struct stmmac_mdio_bus_data {
 
 struct stmmac_dma_cfg {
 	int pbl;
+	int txpbl;
+	int rxpbl;
 	int fixed_burst;
 	int mixed_burst;
 	bool aal;
-- 
2.1.4

Re: [PATCH 1/6] net: stmmac: return error if no DMA configuration is found

[David Miller]

When you post a series of related changes as a patch set, you must
provide a proper "[PATCH 0/N] ..." posting which explains what
the series is doing at a high level, how it is doing it, and why
it is doing it that way.

Please repost this entire series with a proper header posting
included.

Thank you.