* [PATCH] net: smsc: smc911x: use new api ethtool_{get|set}_link_ksettings
@ 2017-02-28 22:49 Philippe Reynes
2017-03-09 6:05 ` David Miller
0 siblings, 1 reply; 2+ messages in thread
From: Philippe Reynes @ 2017-02-28 22:49 UTC (permalink / raw)
To: davem, mugunthanvnm, jarod, felipe.balbi, a, fw, robert.jarzmik, arnd
Cc: netdev, linux-kernel, Philippe Reynes
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/smsc/smc911x.c | 51 ++++++++++++++++++----------------
1 files changed, 27 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index 4f19c61..36307d3 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -1446,40 +1446,40 @@ static int smc911x_close(struct net_device *dev)
* Ethtool support
*/
static int
-smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+smc911x_ethtool_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
{
struct smc911x_local *lp = netdev_priv(dev);
int ret, status;
unsigned long flags;
+ u32 supported;
DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
- cmd->maxtxpkt = 1;
- cmd->maxrxpkt = 1;
if (lp->phy_type != 0) {
spin_lock_irqsave(&lp->lock, flags);
- ret = mii_ethtool_gset(&lp->mii, cmd);
+ ret = mii_ethtool_get_link_ksettings(&lp->mii, cmd);
spin_unlock_irqrestore(&lp->lock, flags);
} else {
- cmd->supported = SUPPORTED_10baseT_Half |
+ supported = SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_TP | SUPPORTED_AUI;
if (lp->ctl_rspeed == 10)
- ethtool_cmd_speed_set(cmd, SPEED_10);
+ cmd->base.speed = SPEED_10;
else if (lp->ctl_rspeed == 100)
- ethtool_cmd_speed_set(cmd, SPEED_100);
-
- cmd->autoneg = AUTONEG_DISABLE;
- if (lp->mii.phy_id==1)
- cmd->transceiver = XCVR_INTERNAL;
- else
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->port = 0;
+ cmd->base.speed = SPEED_100;
+
+ cmd->base.autoneg = AUTONEG_DISABLE;
+ cmd->base.port = 0;
SMC_GET_PHY_SPECIAL(lp, lp->mii.phy_id, status);
- cmd->duplex =
+ cmd->base.duplex =
(status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ?
DUPLEX_FULL : DUPLEX_HALF;
+
+ ethtool_convert_legacy_u32_to_link_mode(
+ cmd->link_modes.supported, supported);
+
ret = 0;
}
@@ -1487,7 +1487,8 @@ static int smc911x_close(struct net_device *dev)
}
static int
-smc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+smc911x_ethtool_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct smc911x_local *lp = netdev_priv(dev);
int ret;
@@ -1495,16 +1496,18 @@ static int smc911x_close(struct net_device *dev)
if (lp->phy_type != 0) {
spin_lock_irqsave(&lp->lock, flags);
- ret = mii_ethtool_sset(&lp->mii, cmd);
+ ret = mii_ethtool_set_link_ksettings(&lp->mii, cmd);
spin_unlock_irqrestore(&lp->lock, flags);
} else {
- if (cmd->autoneg != AUTONEG_DISABLE ||
- cmd->speed != SPEED_10 ||
- (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) ||
- (cmd->port != PORT_TP && cmd->port != PORT_AUI))
+ if (cmd->base.autoneg != AUTONEG_DISABLE ||
+ cmd->base.speed != SPEED_10 ||
+ (cmd->base.duplex != DUPLEX_HALF &&
+ cmd->base.duplex != DUPLEX_FULL) ||
+ (cmd->base.port != PORT_TP &&
+ cmd->base.port != PORT_AUI))
return -EINVAL;
- lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL;
+ lp->ctl_rfduplx = cmd->base.duplex == DUPLEX_FULL;
ret = 0;
}
@@ -1686,8 +1689,6 @@ static int smc911x_ethtool_geteeprom_len(struct net_device *dev)
}
static const struct ethtool_ops smc911x_ethtool_ops = {
- .get_settings = smc911x_ethtool_getsettings,
- .set_settings = smc911x_ethtool_setsettings,
.get_drvinfo = smc911x_ethtool_getdrvinfo,
.get_msglevel = smc911x_ethtool_getmsglevel,
.set_msglevel = smc911x_ethtool_setmsglevel,
@@ -1698,6 +1699,8 @@ static int smc911x_ethtool_geteeprom_len(struct net_device *dev)
.get_eeprom_len = smc911x_ethtool_geteeprom_len,
.get_eeprom = smc911x_ethtool_geteeprom,
.set_eeprom = smc911x_ethtool_seteeprom,
+ .get_link_ksettings = smc911x_ethtool_get_link_ksettings,
+ .set_link_ksettings = smc911x_ethtool_set_link_ksettings,
};
/*
--
1.7.4.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] net: smsc: smc911x: use new api ethtool_{get|set}_link_ksettings
2017-02-28 22:49 [PATCH] net: smsc: smc911x: use new api ethtool_{get|set}_link_ksettings Philippe Reynes
@ 2017-03-09 6:05 ` David Miller
0 siblings, 0 replies; 2+ messages in thread
From: David Miller @ 2017-03-09 6:05 UTC (permalink / raw)
To: tremyfr
Cc: mugunthanvnm, jarod, felipe.balbi, a, fw, robert.jarzmik, arnd,
netdev, linux-kernel
From: Philippe Reynes <tremyfr@gmail.com>
Date: Tue, 28 Feb 2017 23:49:38 +0100
> The ethtool api {get|set}_settings is deprecated.
> We move this driver to new api {get|set}_link_ksettings.
>
> As I don't have the hardware, I'd be very pleased if
> someone may test this patch.
>
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Applied.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-03-09 6:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-28 22:49 [PATCH] net: smsc: smc911x: use new api ethtool_{get|set}_link_ksettings Philippe Reynes
2017-03-09 6:05 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).