From: Michael Schmitz <schmitzmic@gmail.com>
To: netdev@vger.kernel.org
To: netdev@vger.kernel-org
Cc: schmitz@debian.org, Michael Schmitz <schmitzmic@gmail.com>,
andrew@lunn.ch, davem@davemloft.net, sfr@canb.auug.org.au
Subject: [PATCH v2] net: phy: rename Asix Electronics PHY driver
Date: Sat, 18 May 2019 13:14:55 +1200 [thread overview]
Message-ID: <1558142095-20307-1-git-send-email-schmitzmic@gmail.com> (raw)
In-Reply-To: <20190514105649.512267cd@canb.auug.org.au>
Commit 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver")
introduced a new PHY driver drivers/net/phy/asix.c that causes a module
name conflict with a pre-existiting driver (drivers/net/usb/asix.c).
The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded
by that driver via its PHY ID. A rename of the driver looks unproblematic.
Rename PHY driver to ax88796b.c in order to resolve name conflict.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver")
---
Changes from v1:
- merge into single commit (suggested by Andrew Lunn)
---
drivers/net/ethernet/8390/Kconfig | 2 +-
drivers/net/phy/Kconfig | 2 +-
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/asix.c | 57 ---------------------------------------
drivers/net/phy/ax88796b.c | 57 +++++++++++++++++++++++++++++++++++++++
5 files changed, 60 insertions(+), 60 deletions(-)
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index f2f0264..443b34e 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -49,7 +49,7 @@ config XSURF100
tristate "Amiga XSurf 100 AX88796/NE2000 clone support"
depends on ZORRO
select AX88796
- select ASIX_PHY
+ select AX88796B_PHY
help
This driver is for the Individual Computers X-Surf 100 Ethernet
card (based on the Asix AX88796 chip). If you have such a card,
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index d629971..5496e5c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -253,7 +253,7 @@ config AQUANTIA_PHY
---help---
Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
-config ASIX_PHY
+config AX88796B_PHY
tristate "Asix PHYs"
help
Currently supports the Asix Electronics PHY found in the X-Surf 100
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 27d7f9f..5b5c866 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -52,7 +52,7 @@ ifdef CONFIG_HWMON
aquantia-objs += aquantia_hwmon.o
endif
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
-obj-$(CONFIG_ASIX_PHY) += asix.o
+obj-$(CONFIG_AX88796B_PHY) += ax88796b.o
obj-$(CONFIG_AT803X_PHY) += at803x.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
diff --git a/drivers/net/phy/asix.c b/drivers/net/phy/asix.c
deleted file mode 100644
index 79bf7ef..0000000
--- a/drivers/net/phy/asix.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Driver for Asix PHYs
- *
- * Author: Michael Schmitz <schmitzmic@gmail.com>
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-
-#define PHY_ID_ASIX_AX88796B 0x003b1841
-
-MODULE_DESCRIPTION("Asix PHY driver");
-MODULE_AUTHOR("Michael Schmitz <schmitzmic@gmail.com>");
-MODULE_LICENSE("GPL");
-
-/**
- * asix_soft_reset - software reset the PHY via BMCR_RESET bit
- * @phydev: target phy_device struct
- *
- * Description: Perform a software PHY reset using the standard
- * BMCR_RESET bit and poll for the reset bit to be cleared.
- * Toggle BMCR_RESET bit off to accommodate broken AX8796B PHY implementation
- * such as used on the Individual Computers' X-Surf 100 Zorro card.
- *
- * Returns: 0 on success, < 0 on failure
- */
-static int asix_soft_reset(struct phy_device *phydev)
-{
- int ret;
-
- /* Asix PHY won't reset unless reset bit toggles */
- ret = phy_write(phydev, MII_BMCR, 0);
- if (ret < 0)
- return ret;
-
- return genphy_soft_reset(phydev);
-}
-
-static struct phy_driver asix_driver[] = { {
- .phy_id = PHY_ID_ASIX_AX88796B,
- .name = "Asix Electronics AX88796B",
- .phy_id_mask = 0xfffffff0,
- /* PHY_BASIC_FEATURES */
- .soft_reset = asix_soft_reset,
-} };
-
-module_phy_driver(asix_driver);
-
-static struct mdio_device_id __maybe_unused asix_tbl[] = {
- { PHY_ID_ASIX_AX88796B, 0xfffffff0 },
- { }
-};
-
-MODULE_DEVICE_TABLE(mdio, asix_tbl);
diff --git a/drivers/net/phy/ax88796b.c b/drivers/net/phy/ax88796b.c
new file mode 100644
index 0000000..79bf7ef
--- /dev/null
+++ b/drivers/net/phy/ax88796b.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Driver for Asix PHYs
+ *
+ * Author: Michael Schmitz <schmitzmic@gmail.com>
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#define PHY_ID_ASIX_AX88796B 0x003b1841
+
+MODULE_DESCRIPTION("Asix PHY driver");
+MODULE_AUTHOR("Michael Schmitz <schmitzmic@gmail.com>");
+MODULE_LICENSE("GPL");
+
+/**
+ * asix_soft_reset - software reset the PHY via BMCR_RESET bit
+ * @phydev: target phy_device struct
+ *
+ * Description: Perform a software PHY reset using the standard
+ * BMCR_RESET bit and poll for the reset bit to be cleared.
+ * Toggle BMCR_RESET bit off to accommodate broken AX8796B PHY implementation
+ * such as used on the Individual Computers' X-Surf 100 Zorro card.
+ *
+ * Returns: 0 on success, < 0 on failure
+ */
+static int asix_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Asix PHY won't reset unless reset bit toggles */
+ ret = phy_write(phydev, MII_BMCR, 0);
+ if (ret < 0)
+ return ret;
+
+ return genphy_soft_reset(phydev);
+}
+
+static struct phy_driver asix_driver[] = { {
+ .phy_id = PHY_ID_ASIX_AX88796B,
+ .name = "Asix Electronics AX88796B",
+ .phy_id_mask = 0xfffffff0,
+ /* PHY_BASIC_FEATURES */
+ .soft_reset = asix_soft_reset,
+} };
+
+module_phy_driver(asix_driver);
+
+static struct mdio_device_id __maybe_unused asix_tbl[] = {
+ { PHY_ID_ASIX_AX88796B, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, asix_tbl);
--
1.9.1
next prev parent reply other threads:[~2019-05-18 1:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190514105649.512267cd@canb.auug.org.au>
2019-05-17 20:25 ` [PATCH 0/3] resolve module name conflict for asix PHY and USB modules Michael Schmitz
2019-05-17 21:20 ` Andrew Lunn
2019-05-18 1:17 ` Michael Schmitz
2019-05-17 20:25 ` [PATCH 1/3] net: phy: new ax88796b.c Asix Electronics PHY driver Michael Schmitz
2019-05-17 20:25 ` [PATCH 2/3] net: 8390: switch X-Surf 100 driver to use ax88796b PHY Michael Schmitz
2019-05-17 20:25 ` [PATCH 3/3] net: phy: remove old Asix Electronics PHY driver Michael Schmitz
2019-05-18 1:14 ` Michael Schmitz [this message]
2019-05-18 14:20 ` [PATCH v2] net: phy: rename " Andrew Lunn
2019-05-18 17:48 ` Michael Schmitz
2019-05-18 18:04 ` Andrew Lunn
2019-06-07 5:37 ` [PATCH net v3] " Michael Schmitz
2019-06-07 13:00 ` Andrew Lunn
2019-06-08 1:54 ` Michael Schmitz
2019-06-09 20:24 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1558142095-20307-1-git-send-email-schmitzmic@gmail.com \
--to=schmitzmic@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=schmitz@debian.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).