From: Voon Weifeng <weifeng.voon@intel.com>
To: "David S. Miller" <davem@davemloft.net>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Jose Abreu <joabreu@synopsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
biao huang <biao.huang@mediatek.com>,
Ong Boon Leong <boon.leong.ong@intel.com>,
Kweh Hock Leong <hock.leong.kweh@intel.com>,
Voon Weifeng <weifeng.voon@intel.com>
Subject: [PATCH net-next v6 5/5] net: stmmac: add EHL SGMII 1Gbps PCI info and PCI ID
Date: Wed, 5 Jun 2019 02:58:56 +0800 [thread overview]
Message-ID: <1559674736-2190-6-git-send-email-weifeng.voon@intel.com> (raw)
In-Reply-To: <1559674736-2190-1-git-send-email-weifeng.voon@intel.com>
Added EHL SGMII 1Gbps PCI ID. Different MII and speed will have
different PCI ID.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 111 +++++++++++++++++++++++
1 file changed, 111 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 7cbc01f316fa..1bdf716bfcbb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -23,6 +23,7 @@
#include <linux/dmi.h>
#include "stmmac.h"
+#include "dwxpcs.h"
/*
* This struct is used to associate PCI Function of MAC controller on a board,
@@ -118,6 +119,113 @@ static int stmmac_default_data(struct pci_dev *pdev,
.setup = stmmac_default_data,
};
+static int ehl_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ int i;
+
+ plat->bus_id = 1;
+ plat->phy_addr = 0;
+ plat->clk_csr = 5;
+ plat->has_gmac = 0;
+ plat->has_gmac4 = 1;
+ plat->xpcs_phy_addr = 0x16;
+ plat->pcs_mode = AN_CTRL_PCS_MD_C37_SGMII;
+ plat->force_sf_dma_mode = 0;
+ plat->tso_en = 1;
+
+ plat->rx_queues_to_use = 8;
+ plat->tx_queues_to_use = 8;
+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
+
+ for (i = 0; i < plat->rx_queues_to_use; i++) {
+ plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
+ plat->rx_queues_cfg[i].chan = i;
+
+ /* Disable Priority config by default */
+ plat->rx_queues_cfg[i].use_prio = false;
+
+ /* Disable RX queues routing by default */
+ plat->rx_queues_cfg[i].pkt_route = 0x0;
+ }
+
+ for (i = 0; i < plat->tx_queues_to_use; i++) {
+ plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
+
+ /* Disable Priority config by default */
+ plat->tx_queues_cfg[i].use_prio = false;
+ }
+
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
+ plat->tx_queues_cfg[0].weight = 0x09;
+ plat->tx_queues_cfg[1].weight = 0x0A;
+ plat->tx_queues_cfg[2].weight = 0x0B;
+ plat->tx_queues_cfg[3].weight = 0x0C;
+ plat->tx_queues_cfg[4].weight = 0x0D;
+ plat->tx_queues_cfg[5].weight = 0x0E;
+ plat->tx_queues_cfg[6].weight = 0x0F;
+ plat->tx_queues_cfg[7].weight = 0x10;
+
+ plat->mdio_bus_data->phy_reset = NULL;
+ plat->mdio_bus_data->phy_mask = 0;
+
+ plat->dma_cfg->pbl = 32;
+ plat->dma_cfg->pblx8 = true;
+ plat->dma_cfg->fixed_burst = 0;
+ plat->dma_cfg->mixed_burst = 0;
+ plat->dma_cfg->aal = 0;
+
+ plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi),
+ GFP_KERNEL);
+ if (!plat->axi)
+ return -ENOMEM;
+
+ plat->axi->axi_lpi_en = 0;
+ plat->axi->axi_xit_frm = 0;
+ plat->axi->axi_wr_osr_lmt = 1;
+ plat->axi->axi_rd_osr_lmt = 1;
+ plat->axi->axi_blen[0] = 4;
+ plat->axi->axi_blen[1] = 8;
+ plat->axi->axi_blen[2] = 16;
+
+ /* Set default value for multicast hash bins */
+ plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat->unicast_filter_entries = 1;
+
+ /* Set the maxmtu to a default of JUMBO_LEN */
+ plat->maxmtu = JUMBO_LEN;
+
+ /* Set 32KB fifo size as the advertised fifo size in
+ * the HW features is not the same as the HW implementation
+ */
+ plat->tx_fifo_size = 32768;
+ plat->rx_fifo_size = 32768;
+
+ return 0;
+}
+
+static int ehl_sgmii1g_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ int ret;
+
+ /* Set common default data first */
+ ret = ehl_common_data(pdev, plat);
+ if (ret)
+ return ret;
+
+ plat->interface = PHY_INTERFACE_MODE_SGMII;
+ plat->has_xpcs = 1;
+
+ return 0;
+}
+
+static struct stmmac_pci_info ehl_sgmii1g_pci_info = {
+ .setup = ehl_sgmii1g_data,
+};
+
static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
{
.func = 6,
@@ -290,6 +398,7 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
res.addr = pcim_iomap_table(pdev)[i];
res.wol_irq = pdev->irq;
res.irq = pdev->irq;
+ res.xpcs_irq = 0;
return stmmac_dvr_probe(&pdev->dev, plat, &res);
}
@@ -359,6 +468,7 @@ static int __maybe_unused stmmac_pci_resume(struct device *dev)
#define STMMAC_QUARK_ID 0x0937
#define STMMAC_DEVICE_ID 0x1108
+#define STMMAC_EHL_SGMII1G_ID 0x4b31
#define STMMAC_DEVICE(vendor_id, dev_id, info) { \
PCI_VDEVICE(vendor_id, dev_id), \
@@ -369,6 +479,7 @@ static int __maybe_unused stmmac_pci_resume(struct device *dev)
STMMAC_DEVICE(STMMAC, STMMAC_DEVICE_ID, stmmac_pci_info),
STMMAC_DEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_MAC, stmmac_pci_info),
STMMAC_DEVICE(INTEL, STMMAC_QUARK_ID, quark_pci_info),
+ STMMAC_DEVICE(INTEL, STMMAC_EHL_SGMII1G_ID, ehl_sgmii1g_pci_info),
{}
};
--
1.9.1
prev parent reply other threads:[~2019-06-04 10:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 18:58 [PATCH net-next v6 0/5] net: stmmac: enable EHL SGMII Voon Weifeng
2019-06-04 14:09 ` Jose Abreu
2019-06-04 18:58 ` [PATCH net-next v6 1/5] net: stmmac: enable clause 45 mdio support Voon Weifeng
2019-06-04 18:58 ` [PATCH net-next v6 2/5] net: stmmac: introducing support for DWC xPCS logics Voon Weifeng
2019-06-04 20:46 ` Florian Fainelli
2019-06-05 13:13 ` Jose Abreu
2019-06-07 0:23 ` Ong, Boon Leong
2019-06-20 5:13 ` Ong, Boon Leong
2019-06-04 18:58 ` [PATCH net-next v6 3/5] net: stmmac: add xpcs function hooks into main driver and ethtool Voon Weifeng
2019-06-04 18:58 ` [PATCH net-next v6 4/5] net: stmmac: add xPCS functions for device with DWMACv5.1 Voon Weifeng
2019-06-04 18:58 ` Voon Weifeng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559674736-2190-6-git-send-email-weifeng.voon@intel.com \
--to=weifeng.voon@intel.com \
--cc=alexandre.torgue@st.com \
--cc=andrew@lunn.ch \
--cc=biao.huang@mediatek.com \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hock.leong.kweh@intel.com \
--cc=joabreu@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).