netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, kuba@kernel.org
Subject: [PATCH net-next 7/8] bnxt_en: clean up VLAN feature bit handling
Date: Mon, 29 Jun 2020 02:34:23 -0400	[thread overview]
Message-ID: <1593412464-503-8-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1593412464-503-1-git-send-email-michael.chan@broadcom.com>

From: Edwin Peer <edwin.peer@broadcom.com>

The hardware VLAN offload feature on our NIC does not have separate
knobs for handling customer and service tags on RX. Either offloading
of both must be enabled or both must be disabled. Introduce definitions
for the combined feature set in order to clean up the code and make
this constraint more clear. Technically these features can be separately
enabled on TX, however, since the default is to turn both on, the
combined TX feature set is also introduced for code consistency.

Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 34 ++++++++++++-------------------
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |  5 +++++
 2 files changed, 18 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index eb7f2d4..4f8fc28 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1614,7 +1614,7 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp,
 		skb_set_hash(skb, tpa_info->rss_hash, tpa_info->hash_type);
 
 	if ((tpa_info->flags2 & RX_CMP_FLAGS2_META_FORMAT_VLAN) &&
-	    (skb->dev->features & NETIF_F_HW_VLAN_CTAG_RX)) {
+	    (skb->dev->features & BNXT_HW_FEATURE_VLAN_ALL_RX)) {
 		u16 vlan_proto = tpa_info->metadata >>
 			RX_CMP_FLAGS2_METADATA_TPID_SFT;
 		u16 vtag = tpa_info->metadata & RX_CMP_FLAGS2_METADATA_TCI_MASK;
@@ -1832,7 +1832,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 
 	if ((rxcmp1->rx_cmp_flags2 &
 	     cpu_to_le32(RX_CMP_FLAGS2_META_FORMAT_VLAN)) &&
-	    (skb->dev->features & NETIF_F_HW_VLAN_CTAG_RX)) {
+	    (skb->dev->features & BNXT_HW_FEATURE_VLAN_ALL_RX)) {
 		u32 meta_data = le32_to_cpu(rxcmp1->rx_cmp_meta_data);
 		u16 vtag = meta_data & RX_CMP_FLAGS2_METADATA_TCI_MASK;
 		u16 vlan_proto = meta_data >> RX_CMP_FLAGS2_METADATA_TPID_SFT;
@@ -9913,24 +9913,16 @@ static netdev_features_t bnxt_fix_features(struct net_device *dev,
 	/* Both CTAG and STAG VLAN accelaration on the RX side have to be
 	 * turned on or off together.
 	 */
-	vlan_features = features & (NETIF_F_HW_VLAN_CTAG_RX |
-				    NETIF_F_HW_VLAN_STAG_RX);
-	if (vlan_features != (NETIF_F_HW_VLAN_CTAG_RX |
-			      NETIF_F_HW_VLAN_STAG_RX)) {
-		if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
-			features &= ~(NETIF_F_HW_VLAN_CTAG_RX |
-				      NETIF_F_HW_VLAN_STAG_RX);
+	vlan_features = features & BNXT_HW_FEATURE_VLAN_ALL_RX;
+	if (vlan_features != BNXT_HW_FEATURE_VLAN_ALL_RX) {
+		if (dev->features & BNXT_HW_FEATURE_VLAN_ALL_RX)
+			features &= ~BNXT_HW_FEATURE_VLAN_ALL_RX;
 		else if (vlan_features)
-			features |= NETIF_F_HW_VLAN_CTAG_RX |
-				    NETIF_F_HW_VLAN_STAG_RX;
+			features |= BNXT_HW_FEATURE_VLAN_ALL_RX;
 	}
 #ifdef CONFIG_BNXT_SRIOV
-	if (BNXT_VF(bp)) {
-		if (bp->vf.vlan) {
-			features &= ~(NETIF_F_HW_VLAN_CTAG_RX |
-				      NETIF_F_HW_VLAN_STAG_RX);
-		}
-	}
+	if (BNXT_VF(bp) && bp->vf.vlan)
+		features &= ~BNXT_HW_FEATURE_VLAN_ALL_RX;
 #endif
 	return features;
 }
@@ -9953,7 +9945,7 @@ static int bnxt_set_features(struct net_device *dev, netdev_features_t features)
 	if (bp->flags & BNXT_FLAG_NO_AGG_RINGS)
 		flags &= ~BNXT_FLAG_TPA;
 
-	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+	if (features & BNXT_HW_FEATURE_VLAN_ALL_RX)
 		flags |= BNXT_FLAG_STRIP_VLAN;
 
 	if (features & NETIF_F_NTUPLE)
@@ -12041,8 +12033,8 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM |
 				    NETIF_F_GSO_GRE_CSUM;
 	dev->vlan_features = dev->hw_features | NETIF_F_HIGHDMA;
-	dev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX |
-			    NETIF_F_HW_VLAN_STAG_RX | NETIF_F_HW_VLAN_STAG_TX;
+	dev->hw_features |= BNXT_HW_FEATURE_VLAN_ALL_RX |
+			    BNXT_HW_FEATURE_VLAN_ALL_TX;
 	if (BNXT_SUPPORTS_TPA(bp))
 		dev->hw_features |= NETIF_F_GRO_HW;
 	dev->features |= dev->hw_features | NETIF_F_HIGHDMA;
@@ -12098,7 +12090,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	bnxt_fw_init_one_p3(bp);
 
-	if (dev->hw_features & NETIF_F_HW_VLAN_CTAG_RX)
+	if (dev->hw_features & BNXT_HW_FEATURE_VLAN_ALL_RX)
 		bp->flags |= BNXT_FLAG_STRIP_VLAN;
 
 	rc = bnxt_init_int_mode(bp);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 5890913..13c4064 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1906,6 +1906,11 @@ struct bnxt {
 #define BNXT_PCIE_STATS_OFFSET(counter)			\
 	(offsetof(struct pcie_ctx_hw_stats, counter) / 8)
 
+#define BNXT_HW_FEATURE_VLAN_ALL_RX				\
+	(NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)
+#define BNXT_HW_FEATURE_VLAN_ALL_TX				\
+	(NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX)
+
 #define I2C_DEV_ADDR_A0				0xa0
 #define I2C_DEV_ADDR_A2				0xa2
 #define SFF_DIAG_SUPPORT_OFFSET			0x5c
-- 
1.8.3.1


  parent reply	other threads:[~2020-06-29 19:15 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-29  6:34 [PATCH net-next 0/8] bnxt_en: Driver update for net-next Michael Chan
2020-06-29  6:34 ` [PATCH net-next 1/8] bnxt_en: Set up the chip specific RSS table size Michael Chan
2020-06-29  6:34 ` [PATCH net-next 2/8] bnxt_en: Add logical RSS indirection table structure Michael Chan
2020-06-29 23:53   ` Jakub Kicinski
2020-06-29  6:34 ` [PATCH net-next 3/8] bnxt_en: Add helper function to return the number of RSS contexts Michael Chan
2020-06-29  6:34 ` [PATCH net-next 4/8] bnxt_en: Fill HW RSS table from the RSS logical indirection table Michael Chan
2020-06-29 23:58   ` Jakub Kicinski
2020-06-30  0:42     ` Michael Chan
2020-06-29  6:34 ` [PATCH net-next 5/8] bnxt_en: Return correct RSS indirection table entries to ethtool -x Michael Chan
2020-06-29  6:34 ` [PATCH net-next 6/8] bnxt_en: Implement ethtool -X to set indirection table Michael Chan
2020-06-30  0:06   ` Jakub Kicinski
2020-06-30  0:38     ` Michael Chan
2020-06-30 19:05       ` Jakub Kicinski
2020-06-30 19:42         ` Michael Chan
2020-06-29  6:34 ` Michael Chan [this message]
2020-06-29  6:34 ` [PATCH net-next 8/8] bnxt_en: allow firmware to disable VLAN offloads Michael Chan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1593412464-503-8-git-send-email-michael.chan@broadcom.com \
    --to=michael.chan@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).