* [PATCH net 0/4] net: hns3: fixes for -net
@ 2021-05-18 11:35 Huazhong Tan
2021-05-18 11:36 ` [PATCH net 1/4] net: hns3: fix incorrect resp_msg issue Huazhong Tan
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Huazhong Tan @ 2021-05-18 11:35 UTC (permalink / raw)
To: davem, kuba
Cc: netdev, salil.mehta, yisen.zhuang, huangdaode, linuxarm, Huazhong Tan
This series includes some bugfixes for the HNS3 ethernet driver.
Huazhong Tan (1):
net: hns3: fix user's coalesce configuration lost issue
Jian Shen (1):
net: hns3: put off calling register_netdev() until client initialize
complete
Jiaran Zhang (1):
net: hns3: fix incorrect resp_msg issue
Yunsheng Lin (1):
net: hns3: check the return of skb_checksum_help()
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 110 ++++++++++-----------
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 64 +++++-------
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 4 +-
3 files changed, 77 insertions(+), 101 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH net 1/4] net: hns3: fix incorrect resp_msg issue
2021-05-18 11:35 [PATCH net 0/4] net: hns3: fixes for -net Huazhong Tan
@ 2021-05-18 11:36 ` Huazhong Tan
2021-05-18 11:36 ` [PATCH net 2/4] net: hns3: put off calling register_netdev() until client initialize complete Huazhong Tan
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Huazhong Tan @ 2021-05-18 11:36 UTC (permalink / raw)
To: davem, kuba
Cc: netdev, salil.mehta, yisen.zhuang, huangdaode, linuxarm,
Jiaran Zhang, Huazhong Tan
From: Jiaran Zhang <zhangjiaran@huawei.com>
In hclge_mbx_handler(), if there are two consecutive mailbox
messages that requires resp_msg, the resp_msg is not cleared
after processing the first message, which will cause the resp_msg
data of second message incorrect.
Fix it by clearing the resp_msg before processing every mailbox
message.
Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 8e5f9dc..f1c9f4a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -710,7 +710,6 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
unsigned int flag;
int ret = 0;
- memset(&resp_msg, 0, sizeof(resp_msg));
/* handle all the mailbox requests in the queue */
while (!hclge_cmd_crq_empty(&hdev->hw)) {
if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) {
@@ -738,6 +737,9 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
trace_hclge_pf_mbx_get(hdev, req);
+ /* clear the resp_msg before processing every mailbox message */
+ memset(&resp_msg, 0, sizeof(resp_msg));
+
switch (req->msg.code) {
case HCLGE_MBX_MAP_RING_TO_VECTOR:
ret = hclge_map_unmap_ring_to_vf_vector(vport, true,
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH net 2/4] net: hns3: put off calling register_netdev() until client initialize complete
2021-05-18 11:35 [PATCH net 0/4] net: hns3: fixes for -net Huazhong Tan
2021-05-18 11:36 ` [PATCH net 1/4] net: hns3: fix incorrect resp_msg issue Huazhong Tan
@ 2021-05-18 11:36 ` Huazhong Tan
2021-05-18 11:36 ` [PATCH net 3/4] net: hns3: fix user's coalesce configuration lost issue Huazhong Tan
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Huazhong Tan @ 2021-05-18 11:36 UTC (permalink / raw)
To: davem, kuba
Cc: netdev, salil.mehta, yisen.zhuang, huangdaode, linuxarm,
Jian Shen, Huazhong Tan
From: Jian Shen <shenjian15@huawei.com>
Currently, the netdevice is registered before client initializing
complete. So there is a timewindow between netdevice available
and usable. In this case, if user try to change the channel number
or ring param, it may cause the hns3_set_rx_cpu_rmap() being called
twice, and report bug.
[47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0
[47199.430340] hns3 0000:35:00.0 eth1: already uninitialized
[47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1
[47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1
[47200.163524] ------------[ cut here ]------------
[47200.171674] kernel BUG at lib/cpu_rmap.c:142!
[47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge]
[47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1
[47200.215601] Hardware name: , xxxxxx 02/04/2021
[47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[47200.230188] pc : cpu_rmap_add+0x38/0x40
[47200.237472] lr : irq_cpu_rmap_add+0x84/0x140
[47200.243291] sp : ffff800010e93a30
[47200.247295] x29: ffff800010e93a30 x28: ffff082100584880
[47200.254155] x27: 0000000000000000 x26: 0000000000000000
[47200.260712] x25: 0000000000000000 x24: 0000000000000004
[47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0
[47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680
[47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0
[47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0
[47200.293456] x15: fffffc2082990600 x14: dead000000000122
[47200.300059] x13: ffffffffffffffff x12: 000000000000003e
[47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000
[47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700
[47200.319682] x7 : 0000000000000000 x6 : 000000000000003f
[47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20
[47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80
[47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004
[47200.346058] Call trace:
[47200.349324] cpu_rmap_add+0x38/0x40
[47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3]
[47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3]
[47200.370049] hns3_change_channels+0x40/0xb0 [hns3]
[47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3]
[47200.383353] ethtool_set_channels+0x140/0x250
[47200.389772] dev_ethtool+0x714/0x23d0
[47200.394440] dev_ioctl+0x4cc/0x640
[47200.399277] sock_do_ioctl+0x100/0x2a0
[47200.404574] sock_ioctl+0x28c/0x470
[47200.409079] __arm64_sys_ioctl+0xb4/0x100
[47200.415217] el0_svc_common.constprop.0+0x84/0x210
[47200.422088] do_el0_svc+0x28/0x34
[47200.426387] el0_svc+0x28/0x70
[47200.431308] el0_sync_handler+0x1a4/0x1b0
[47200.436477] el0_sync+0x174/0x180
[47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000)
[47200.448869] ---[ end trace a01efe4ce42e5f34 ]---
The process is like below:
excuting hns3_client_init
|
register_netdev()
| hns3_set_channels()
| |
hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet()
| |
| quit without calling function
| hns3_free_rx_cpu_rmap for flag
| HNS3_NIC_STATE_INITED is unset.
| |
| hns3_reset_notify_init_enet()
| |
set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash
Fix it by calling register_netdev() at the end of function
hns3_client_init().
Fixes: 08a100689d4b ("net: hns3: re-organize vector handle")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 783fdaf..c64d188 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4317,12 +4317,6 @@ static int hns3_client_init(struct hnae3_handle *handle)
if (ret)
goto out_init_phy;
- ret = register_netdev(netdev);
- if (ret) {
- dev_err(priv->dev, "probe register netdev fail!\n");
- goto out_reg_netdev_fail;
- }
-
/* the device can work without cpu rmap, only aRFS needs it */
ret = hns3_set_rx_cpu_rmap(netdev);
if (ret)
@@ -4355,17 +4349,23 @@ static int hns3_client_init(struct hnae3_handle *handle)
if (ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3)
set_bit(HNAE3_PFLAG_LIMIT_PROMISC, &handle->supported_pflags);
+ ret = register_netdev(netdev);
+ if (ret) {
+ dev_err(priv->dev, "probe register netdev fail!\n");
+ goto out_reg_netdev_fail;
+ }
+
if (netif_msg_drv(handle))
hns3_info_show(priv);
return ret;
+out_reg_netdev_fail:
+ hns3_dbg_uninit(handle);
out_client_start:
hns3_free_rx_cpu_rmap(netdev);
hns3_nic_uninit_irq(priv);
out_init_irq_fail:
- unregister_netdev(netdev);
-out_reg_netdev_fail:
hns3_uninit_phy(netdev);
out_init_phy:
hns3_uninit_all_ring(priv);
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH net 3/4] net: hns3: fix user's coalesce configuration lost issue
2021-05-18 11:35 [PATCH net 0/4] net: hns3: fixes for -net Huazhong Tan
2021-05-18 11:36 ` [PATCH net 1/4] net: hns3: fix incorrect resp_msg issue Huazhong Tan
2021-05-18 11:36 ` [PATCH net 2/4] net: hns3: put off calling register_netdev() until client initialize complete Huazhong Tan
@ 2021-05-18 11:36 ` Huazhong Tan
2021-05-18 11:36 ` [PATCH net 4/4] net: hns3: check the return of skb_checksum_help() Huazhong Tan
2021-05-18 21:00 ` [PATCH net 0/4] net: hns3: fixes for -net patchwork-bot+netdevbpf
4 siblings, 0 replies; 6+ messages in thread
From: Huazhong Tan @ 2021-05-18 11:36 UTC (permalink / raw)
To: davem, kuba
Cc: netdev, salil.mehta, yisen.zhuang, huangdaode, linuxarm, Huazhong Tan
Currently, when adaptive is on, the user's coalesce configuration
may be overwritten by the dynamic one. The reason is that user's
configurations are saved in struct hns3_enet_tqp_vector whose
value maybe changed by the dynamic algorithm. To fix it, use
struct hns3_nic_priv instead of struct hns3_enet_tqp_vector to
save and get the user's configuration.
BTW, operations of storing and restoring coalesce info in the reset
process are unnecessary now, so remove them as well.
Fixes: 434776a5fae2 ("net: hns3: add ethtool_ops.set_coalesce support to PF")
Fixes: 7e96adc46633 ("net: hns3: add ethtool_ops.get_coalesce support to PF")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 84 +++++++++++-----------
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 64 ++++++-----------
2 files changed, 63 insertions(+), 85 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index c64d188..6d6c0ac 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -264,22 +264,17 @@ static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
struct hnae3_ae_dev *ae_dev = pci_get_drvdata(priv->ae_handle->pdev);
struct hns3_enet_coalesce *tx_coal = &tqp_vector->tx_group.coal;
struct hns3_enet_coalesce *rx_coal = &tqp_vector->rx_group.coal;
+ struct hns3_enet_coalesce *ptx_coal = &priv->tx_coal;
+ struct hns3_enet_coalesce *prx_coal = &priv->rx_coal;
- /* initialize the configuration for interrupt coalescing.
- * 1. GL (Interrupt Gap Limiter)
- * 2. RL (Interrupt Rate Limiter)
- * 3. QL (Interrupt Quantity Limiter)
- *
- * Default: enable interrupt coalescing self-adaptive and GL
- */
- tx_coal->adapt_enable = 1;
- rx_coal->adapt_enable = 1;
+ tx_coal->adapt_enable = ptx_coal->adapt_enable;
+ rx_coal->adapt_enable = prx_coal->adapt_enable;
- tx_coal->int_gl = HNS3_INT_GL_50K;
- rx_coal->int_gl = HNS3_INT_GL_50K;
+ tx_coal->int_gl = ptx_coal->int_gl;
+ rx_coal->int_gl = prx_coal->int_gl;
- rx_coal->flow_level = HNS3_FLOW_LOW;
- tx_coal->flow_level = HNS3_FLOW_LOW;
+ rx_coal->flow_level = prx_coal->flow_level;
+ tx_coal->flow_level = ptx_coal->flow_level;
/* device version above V3(include V3), GL can configure 1us
* unit, so uses 1us unit.
@@ -294,8 +289,8 @@ static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
rx_coal->ql_enable = 1;
tx_coal->int_ql_max = ae_dev->dev_specs.int_ql_max;
rx_coal->int_ql_max = ae_dev->dev_specs.int_ql_max;
- tx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
- rx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
+ tx_coal->int_ql = ptx_coal->int_ql;
+ rx_coal->int_ql = prx_coal->int_ql;
}
}
@@ -3844,6 +3839,34 @@ static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
return ret;
}
+static void hns3_nic_init_coal_cfg(struct hns3_nic_priv *priv)
+{
+ struct hnae3_ae_dev *ae_dev = pci_get_drvdata(priv->ae_handle->pdev);
+ struct hns3_enet_coalesce *tx_coal = &priv->tx_coal;
+ struct hns3_enet_coalesce *rx_coal = &priv->rx_coal;
+
+ /* initialize the configuration for interrupt coalescing.
+ * 1. GL (Interrupt Gap Limiter)
+ * 2. RL (Interrupt Rate Limiter)
+ * 3. QL (Interrupt Quantity Limiter)
+ *
+ * Default: enable interrupt coalescing self-adaptive and GL
+ */
+ tx_coal->adapt_enable = 1;
+ rx_coal->adapt_enable = 1;
+
+ tx_coal->int_gl = HNS3_INT_GL_50K;
+ rx_coal->int_gl = HNS3_INT_GL_50K;
+
+ rx_coal->flow_level = HNS3_FLOW_LOW;
+ tx_coal->flow_level = HNS3_FLOW_LOW;
+
+ if (ae_dev->dev_specs.int_ql_max) {
+ tx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
+ rx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
+ }
+}
+
static int hns3_nic_alloc_vector_data(struct hns3_nic_priv *priv)
{
struct hnae3_handle *h = priv->ae_handle;
@@ -4295,6 +4318,8 @@ static int hns3_client_init(struct hnae3_handle *handle)
goto out_get_ring_cfg;
}
+ hns3_nic_init_coal_cfg(priv);
+
ret = hns3_nic_alloc_vector_data(priv);
if (ret) {
ret = -ENOMEM;
@@ -4571,31 +4596,6 @@ int hns3_nic_reset_all_ring(struct hnae3_handle *h)
return 0;
}
-static void hns3_store_coal(struct hns3_nic_priv *priv)
-{
- /* ethtool only support setting and querying one coal
- * configuration for now, so save the vector 0' coal
- * configuration here in order to restore it.
- */
- memcpy(&priv->tx_coal, &priv->tqp_vector[0].tx_group.coal,
- sizeof(struct hns3_enet_coalesce));
- memcpy(&priv->rx_coal, &priv->tqp_vector[0].rx_group.coal,
- sizeof(struct hns3_enet_coalesce));
-}
-
-static void hns3_restore_coal(struct hns3_nic_priv *priv)
-{
- u16 vector_num = priv->vector_num;
- int i;
-
- for (i = 0; i < vector_num; i++) {
- memcpy(&priv->tqp_vector[i].tx_group.coal, &priv->tx_coal,
- sizeof(struct hns3_enet_coalesce));
- memcpy(&priv->tqp_vector[i].rx_group.coal, &priv->rx_coal,
- sizeof(struct hns3_enet_coalesce));
- }
-}
-
static int hns3_reset_notify_down_enet(struct hnae3_handle *handle)
{
struct hnae3_knic_private_info *kinfo = &handle->kinfo;
@@ -4654,8 +4654,6 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
if (ret)
goto err_put_ring;
- hns3_restore_coal(priv);
-
ret = hns3_nic_init_vector_data(priv);
if (ret)
goto err_dealloc_vector;
@@ -4721,8 +4719,6 @@ static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
hns3_nic_uninit_vector_data(priv);
- hns3_store_coal(priv);
-
hns3_nic_dealloc_vector_data(priv);
hns3_uninit_all_ring(priv);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index b48faf7..c1ea403 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -1134,50 +1134,32 @@ static void hns3_get_channels(struct net_device *netdev,
h->ae_algo->ops->get_channels(h, ch);
}
-static int hns3_get_coalesce_per_queue(struct net_device *netdev, u32 queue,
- struct ethtool_coalesce *cmd)
+static int hns3_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *cmd)
{
- struct hns3_enet_tqp_vector *tx_vector, *rx_vector;
struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hns3_enet_coalesce *tx_coal = &priv->tx_coal;
+ struct hns3_enet_coalesce *rx_coal = &priv->rx_coal;
struct hnae3_handle *h = priv->ae_handle;
- u16 queue_num = h->kinfo.num_tqps;
if (hns3_nic_resetting(netdev))
return -EBUSY;
- if (queue >= queue_num) {
- netdev_err(netdev,
- "Invalid queue value %u! Queue max id=%u\n",
- queue, queue_num - 1);
- return -EINVAL;
- }
-
- tx_vector = priv->ring[queue].tqp_vector;
- rx_vector = priv->ring[queue_num + queue].tqp_vector;
+ cmd->use_adaptive_tx_coalesce = tx_coal->adapt_enable;
+ cmd->use_adaptive_rx_coalesce = rx_coal->adapt_enable;
- cmd->use_adaptive_tx_coalesce =
- tx_vector->tx_group.coal.adapt_enable;
- cmd->use_adaptive_rx_coalesce =
- rx_vector->rx_group.coal.adapt_enable;
-
- cmd->tx_coalesce_usecs = tx_vector->tx_group.coal.int_gl;
- cmd->rx_coalesce_usecs = rx_vector->rx_group.coal.int_gl;
+ cmd->tx_coalesce_usecs = tx_coal->int_gl;
+ cmd->rx_coalesce_usecs = rx_coal->int_gl;
cmd->tx_coalesce_usecs_high = h->kinfo.int_rl_setting;
cmd->rx_coalesce_usecs_high = h->kinfo.int_rl_setting;
- cmd->tx_max_coalesced_frames = tx_vector->tx_group.coal.int_ql;
- cmd->rx_max_coalesced_frames = rx_vector->rx_group.coal.int_ql;
+ cmd->tx_max_coalesced_frames = tx_coal->int_ql;
+ cmd->rx_max_coalesced_frames = rx_coal->int_ql;
return 0;
}
-static int hns3_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *cmd)
-{
- return hns3_get_coalesce_per_queue(netdev, 0, cmd);
-}
-
static int hns3_check_gl_coalesce_para(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
@@ -1292,19 +1274,7 @@ static int hns3_check_coalesce_para(struct net_device *netdev,
return ret;
}
- ret = hns3_check_ql_coalesce_param(netdev, cmd);
- if (ret)
- return ret;
-
- if (cmd->use_adaptive_tx_coalesce == 1 ||
- cmd->use_adaptive_rx_coalesce == 1) {
- netdev_info(netdev,
- "adaptive-tx=%u and adaptive-rx=%u, tx_usecs or rx_usecs will changed dynamically.\n",
- cmd->use_adaptive_tx_coalesce,
- cmd->use_adaptive_rx_coalesce);
- }
-
- return 0;
+ return hns3_check_ql_coalesce_param(netdev, cmd);
}
static void hns3_set_coalesce_per_queue(struct net_device *netdev,
@@ -1350,6 +1320,9 @@ static int hns3_set_coalesce(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
struct hnae3_handle *h = hns3_get_handle(netdev);
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hns3_enet_coalesce *tx_coal = &priv->tx_coal;
+ struct hns3_enet_coalesce *rx_coal = &priv->rx_coal;
u16 queue_num = h->kinfo.num_tqps;
int ret;
int i;
@@ -1364,6 +1337,15 @@ static int hns3_set_coalesce(struct net_device *netdev,
h->kinfo.int_rl_setting =
hns3_rl_round_down(cmd->rx_coalesce_usecs_high);
+ tx_coal->adapt_enable = cmd->use_adaptive_tx_coalesce;
+ rx_coal->adapt_enable = cmd->use_adaptive_rx_coalesce;
+
+ tx_coal->int_gl = cmd->tx_coalesce_usecs;
+ rx_coal->int_gl = cmd->rx_coalesce_usecs;
+
+ tx_coal->int_ql = cmd->tx_max_coalesced_frames;
+ rx_coal->int_ql = cmd->rx_max_coalesced_frames;
+
for (i = 0; i < queue_num; i++)
hns3_set_coalesce_per_queue(netdev, cmd, i);
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH net 4/4] net: hns3: check the return of skb_checksum_help()
2021-05-18 11:35 [PATCH net 0/4] net: hns3: fixes for -net Huazhong Tan
` (2 preceding siblings ...)
2021-05-18 11:36 ` [PATCH net 3/4] net: hns3: fix user's coalesce configuration lost issue Huazhong Tan
@ 2021-05-18 11:36 ` Huazhong Tan
2021-05-18 21:00 ` [PATCH net 0/4] net: hns3: fixes for -net patchwork-bot+netdevbpf
4 siblings, 0 replies; 6+ messages in thread
From: Huazhong Tan @ 2021-05-18 11:36 UTC (permalink / raw)
To: davem, kuba
Cc: netdev, salil.mehta, yisen.zhuang, huangdaode, linuxarm,
Yunsheng Lin, Huazhong Tan
From: Yunsheng Lin <linyunsheng@huawei.com>
Currently skb_checksum_help()'s return is ignored, but it may
return error when it fails to allocate memory when linearizing.
So adds checking for the return of skb_checksum_help().
Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 6d6c0ac..026558f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -841,8 +841,6 @@ static bool hns3_tunnel_csum_bug(struct sk_buff *skb)
l4.udp->dest == htons(4790))))
return false;
- skb_checksum_help(skb);
-
return true;
}
@@ -919,8 +917,7 @@ static int hns3_set_l2l3l4(struct sk_buff *skb, u8 ol4_proto,
/* the stack computes the IP header already,
* driver calculate l4 checksum when not TSO.
*/
- skb_checksum_help(skb);
- return 0;
+ return skb_checksum_help(skb);
}
hns3_set_outer_l2l3l4(skb, ol4_proto, ol_type_vlan_len_msec);
@@ -965,7 +962,7 @@ static int hns3_set_l2l3l4(struct sk_buff *skb, u8 ol4_proto,
break;
case IPPROTO_UDP:
if (hns3_tunnel_csum_bug(skb))
- break;
+ return skb_checksum_help(skb);
hns3_set_field(*type_cs_vlan_tso, HNS3_TXD_L4CS_B, 1);
hns3_set_field(*type_cs_vlan_tso, HNS3_TXD_L4T_S,
@@ -990,8 +987,7 @@ static int hns3_set_l2l3l4(struct sk_buff *skb, u8 ol4_proto,
/* the stack computes the IP header already,
* driver calculate l4 checksum when not TSO.
*/
- skb_checksum_help(skb);
- return 0;
+ return skb_checksum_help(skb);
}
return 0;
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH net 0/4] net: hns3: fixes for -net
2021-05-18 11:35 [PATCH net 0/4] net: hns3: fixes for -net Huazhong Tan
` (3 preceding siblings ...)
2021-05-18 11:36 ` [PATCH net 4/4] net: hns3: check the return of skb_checksum_help() Huazhong Tan
@ 2021-05-18 21:00 ` patchwork-bot+netdevbpf
4 siblings, 0 replies; 6+ messages in thread
From: patchwork-bot+netdevbpf @ 2021-05-18 21:00 UTC (permalink / raw)
To: Huazhong Tan
Cc: davem, kuba, netdev, salil.mehta, yisen.zhuang, huangdaode, linuxarm
Hello:
This series was applied to netdev/net.git (refs/heads/master):
On Tue, 18 May 2021 19:35:59 +0800 you wrote:
> This series includes some bugfixes for the HNS3 ethernet driver.
>
> Huazhong Tan (1):
> net: hns3: fix user's coalesce configuration lost issue
>
> Jian Shen (1):
> net: hns3: put off calling register_netdev() until client initialize
> complete
>
> [...]
Here is the summary with links:
- [net,1/4] net: hns3: fix incorrect resp_msg issue
https://git.kernel.org/netdev/net/c/a710b9ffbeba
- [net,2/4] net: hns3: put off calling register_netdev() until client initialize complete
https://git.kernel.org/netdev/net/c/a289a7e5c1d4
- [net,3/4] net: hns3: fix user's coalesce configuration lost issue
https://git.kernel.org/netdev/net/c/73a13d8dbe33
- [net,4/4] net: hns3: check the return of skb_checksum_help()
https://git.kernel.org/netdev/net/c/9bb5a495424f
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-18 21:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-18 11:35 [PATCH net 0/4] net: hns3: fixes for -net Huazhong Tan
2021-05-18 11:36 ` [PATCH net 1/4] net: hns3: fix incorrect resp_msg issue Huazhong Tan
2021-05-18 11:36 ` [PATCH net 2/4] net: hns3: put off calling register_netdev() until client initialize complete Huazhong Tan
2021-05-18 11:36 ` [PATCH net 3/4] net: hns3: fix user's coalesce configuration lost issue Huazhong Tan
2021-05-18 11:36 ` [PATCH net 4/4] net: hns3: check the return of skb_checksum_help() Huazhong Tan
2021-05-18 21:00 ` [PATCH net 0/4] net: hns3: fixes for -net patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).