[PATCH net v2 0/2] asix fixes

[PATCH net v2 0/2] asix fixes

[Oleksij Rempel]

changes v2:
- rebase against current net
- add one more fix for the ax88178 variant

Oleksij Rempel (2):
  net: usb: asix: ax88772: move embedded PHY detection as early as
    possible
  net: usb: asix: do not call phy_disconnect() for ax88178

 drivers/net/usb/asix.h         |  1 +
 drivers/net/usb/asix_devices.c | 49 +++++++++++++++++++---------------
 2 files changed, 28 insertions(+), 22 deletions(-)

-- 
2.30.2

[PATCH net v2 1/2] net: usb: asix: ax88772: move embedded PHY detection as early as possible

[Oleksij Rempel]

Some HW revisions need additional MAC configuration before the embedded PHY
can be enabled. If this is not done, we won't be able to get response
from the internal PHY.

This issue was detected on chipcode == AX_AX88772_CHIPCODE variant,
where ax88772_hw_reset() was executed with missing embd_phy flag.

Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/usb/asix.h         |  1 +
 drivers/net/usb/asix_devices.c | 41 +++++++++++++++++-----------------
 2 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index e1994a246122..2a1e31defe71 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -184,6 +184,7 @@ struct asix_common_private {
 	struct phy_device *phydev;
 	u16 phy_addr;
 	char phy_name[20];
+	bool embd_phy;
 };
 
 extern const struct driver_info ax88172a_info;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 2c115216420a..15460d419e3f 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -354,24 +354,23 @@ static int ax88772_reset(struct usbnet *dev)
 static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
-	int ret, embd_phy;
+	struct asix_common_private *priv = dev->driver_priv;
 	u16 rx_ctl;
+	int ret;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
 			      AX_GPIO_GPO2EN, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
-
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy,
 			     0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 		goto out;
 	}
 
-	if (embd_phy) {
+	if (priv->embd_phy) {
 		ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
 		if (ret < 0)
 			goto out;
@@ -449,17 +448,16 @@ static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
 static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
-	int ret, embd_phy;
+	struct asix_common_private *priv = dev->driver_priv;
 	u16 rx_ctl, phy14h, phy15h, phy16h;
 	u8 chipcode = 0;
+	int ret;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
-
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy |
 			     AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
@@ -683,12 +681,6 @@ static int ax88772_init_phy(struct usbnet *dev)
 	struct asix_common_private *priv = dev->driver_priv;
 	int ret;
 
-	ret = asix_read_phy_addr(dev, true);
-	if (ret < 0)
-		return ret;
-
-	priv->phy_addr = ret;
-
 	snprintf(priv->phy_name, sizeof(priv->phy_name), PHY_ID_FMT,
 		 priv->mdio->id, priv->phy_addr);
 
@@ -716,6 +708,12 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	int ret, i;
 	u32 phyid;
 
+	priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev->driver_priv = priv;
+
 	usbnet_get_endpoints(dev, intf);
 
 	/* Maybe the boot loader passed the MAC address via device tree */
@@ -751,6 +749,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
+	ret = asix_read_phy_addr(dev, true);
+	if (ret < 0)
+		return ret;
+
+	priv->phy_addr = ret;
+	priv->embd_phy = ((priv->phy_addr & 0x1f) == 0x10 ? true : false);
+
 	asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
 	chipcode &= AX_CHIPCODE_MASK;
 
@@ -773,12 +778,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 		dev->rx_urb_size = 2048;
 	}
 
-	priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	dev->driver_priv = priv;
-
 	priv->presvd_phy_bmcr = 0;
 	priv->presvd_phy_advertise = 0;
 	if (chipcode == AX_AX88772_CHIPCODE) {
-- 
2.30.2

[PATCH net v2 2/2] net: usb: asix: do not call phy_disconnect() for ax88178

[Oleksij Rempel]

Fix crash on reboot on a system with ASIX AX88178 USB adapter attached
to it:
| asix 1-1.4:1.0 eth0: unregister 'asix' usb-ci_hdrc.0-1.4, ASIX AX88178 USB 2.0 Ethernet
| 8<--- cut here ---
| Unable to handle kernel NULL pointer dereference at virtual address 0000028c
| pgd = 5ec93aee
| [0000028c] *pgd=00000000
| Internal error: Oops: 5 [#1] PREEMPT SMP ARM
| Modules linked in:
| CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.14.0-rc1-20210811-1 #4
| Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
| PC is at phy_disconnect+0x8/0x48
| LR is at ax88772_unbind+0x14/0x20
| [<80650d04>] (phy_disconnect) from [<80741aa4>] (ax88772_unbind+0x14/0x20)
| [<80741aa4>] (ax88772_unbind) from [<8074e250>] (usbnet_disconnect+0x48/0xd8)
| [<8074e250>] (usbnet_disconnect) from [<807655e0>] (usb_unbind_interface+0x78/0x25c)
| [<807655e0>] (usb_unbind_interface) from [<805b03a0>] (__device_release_driver+0x154/0x20c)
| [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c)
| [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8)
| [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0)
| [<805ab26c>] (device_del) from [<807634a4>] (usb_disable_device+0xcc/0x178)
| [<807634a4>] (usb_disable_device) from [<8075a060>] (usb_disconnect+0xd8/0x238)
| [<8075a060>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238)
| [<8075a02c>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238)
| [<8075a02c>] (usb_disconnect) from [<80af3520>] (usb_remove_hcd+0xa0/0x198)
| [<80af3520>] (usb_remove_hcd) from [<807902e0>] (host_stop+0x38/0xa8)
| [<807902e0>] (host_stop) from [<8078d9e4>] (ci_hdrc_remove+0x3c/0x118)
| [<8078d9e4>] (ci_hdrc_remove) from [<805b27ec>] (platform_remove+0x20/0x50)
| [<805b27ec>] (platform_remove) from [<805b03a0>] (__device_release_driver+0x154/0x20c)
| [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c)
| [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8)
| [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0)

For this adapter we call ax88178_bind() and ax88772_unbind(), which is
related to different chip version and different counter part *bind()
function.

Since this chip is currently not ported to the PHYLIB, we do not need to
call phy_disconnect() here. So, to fix this crash, we need to add
ax88178_unbind().

Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Reported-by: Robin van der Gracht <robin@protonic.nl>
Tested-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/usb/asix_devices.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 15460d419e3f..f6f3955a3a0f 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -816,6 +816,12 @@ static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
 	asix_rx_fixup_common_free(dev->driver_priv);
 }
 
+static void ax88178_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	asix_rx_fixup_common_free(dev->driver_priv);
+	kfree(dev->driver_priv);
+}
+
 static const struct ethtool_ops ax88178_ethtool_ops = {
 	.get_drvinfo		= asix_get_drvinfo,
 	.get_link		= asix_get_link,
@@ -1224,7 +1230,7 @@ static const struct driver_info ax88772b_info = {
 static const struct driver_info ax88178_info = {
 	.description = "ASIX AX88178 USB 2.0 Ethernet",
 	.bind = ax88178_bind,
-	.unbind = ax88772_unbind,
+	.unbind = ax88178_unbind,
 	.status = asix_status,
 	.link_reset = ax88178_link_reset,
 	.reset = ax88178_reset,
-- 
2.30.2

Re: [PATCH net v2 0/2] asix fixes

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (refs/heads/master):

On Mon, 23 Aug 2021 09:37:46 +0200 you wrote:
> changes v2:
> - rebase against current net
> - add one more fix for the ax88178 variant
> 
> Oleksij Rempel (2):
>   net: usb: asix: ax88772: move embedded PHY detection as early as
>     possible
>   net: usb: asix: do not call phy_disconnect() for ax88178
> 
> [...]

Here is the summary with links:
  - [net,v2,1/2] net: usb: asix: ax88772: move embedded PHY detection as early as possible
    https://git.kernel.org/netdev/net/c/7a141e64cf14
  - [net,v2,2/2] net: usb: asix: do not call phy_disconnect() for ax88178
    https://git.kernel.org/netdev/net/c/1406e8cb4b05

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html