[PATCH 1/1] net: usb: qmi_wwan: add Telit 0x103a composition

[PATCH 1/1] net: usb: qmi_wwan: add Telit 0x103a composition

[Enrico Sau]

Add the following Telit LE910C4-WWX composition:

0x103a: rmnet

Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
---

This is the lsusb verbose output:

$ lsusb -v -d 1bc7:103a

Bus 001 Device 008: ID 1bc7:103a Telit Wireless Solutions LE910C4-WWX
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x1bc7 Telit Wireless Solutions
  idProduct          0x103a 
  bcdDevice            0.00
  iManufacturer           3 Telit
  iProduct                2 LE910C4-WWX
  iSerial                 4 e1b117c7
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0027
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          1 Telit Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)

---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 30d733c81ed8..c36caf9d6553 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1358,6 +1358,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */
 	{QMI_FIXED_INTF(0x2357, 0x9000, 4)},	/* TP-LINK MA260 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x103a, 0)}, /* Telit LE910C4-WWX */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)},	/* Telit LE922A */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)},	/* Telit FN980 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1057, 2)},	/* Telit FN980 */
-- 
2.25.1

Re: [PATCH 1/1] net: usb: qmi_wwan: add Telit 0x103a composition

[Bjørn Mork]

Enrico Sau <enrico.sau@gmail.com> writes:

> Add the following Telit LE910C4-WWX composition:
>
> 0x103a: rmnet
>
> Signed-off-by: Enrico Sau <enrico.sau@gmail.com>

Looks good.  Thanks

Acked-by: Bjørn Mork <bjorn@mork.no>

Re: [PATCH 1/1] net: usb: qmi_wwan: add Telit 0x103a composition

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (master)
by Paolo Abeni <pabeni@redhat.com>:

On Tue, 15 Nov 2022 11:58:59 +0100 you wrote:
> Add the following Telit LE910C4-WWX composition:
> 
> 0x103a: rmnet
> 
> Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
> ---
> 
> [...]

Here is the summary with links:
  - [1/1] net: usb: qmi_wwan: add Telit 0x103a composition
    https://git.kernel.org/netdev/net/c/e103ba33998d

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html